PV0003 Data Sheet

Comments

Transcription

PV0003 Data Sheet
PV0003
SPECIFICATIONS
TEMCo ID:
PV0003
Operation:
Normally Closed (Valve opens when energized)
Working Media:
Air, Gas, Liquid, Water
Operation Model:
Direct Lift Piston, Normally Closed
Flow Orientation:
Single-Direction
Body Material:
Brass
Seal Material:
Viton
Armature Tube Material:
Stainless Steel
Spring & Plunger Material:
Stainless Steel
Coil Voltage:
12 VDC
Coil Power:
28 VA
Coil Class:
F Class IP54
Coil Duty:
100% ED (Continuous Duty)
Electrical Connection:
Wire Leads
Operating Pressure:
0 PSI Minimum
102 PSI Maximum
Operating Temperature:
-5 to 80°C
Port Size:
1/4" NPT
Valve Orifice Size:
4 mm
Warranty:
5 Years
No Minimum Operating Pressure Unlike Servo Action valves, there is no minimum required pressure to operate. The valve
will operate correctly all the way down to 0 PSI.
Direction of Flow These valves are directional, meaning the source of pressure must always be oriented to the inlet side of
the valve.
www.temcoindustrial.com
Phone: (510) 490-2187
Fax: (510) 490-1507
48621 Warm Springs Blvd
Fremont, CA 94539, USA
Specifications may vary and are subject to change. For certified drawings and specifications, please contact a TEMCo representative.
PV0003
DIMENSIONAL DIAGRAM
All dimensions in inches.
2.6
2.95
1/4”
1.59
1.19
FLOW DIAGRAM
2
1
1
2
1
2
Flow direction
www.temcoindustrial.com
Phone: (510) 490-2187
Fax: (510) 490-1507
48621 Warm Springs Blvd
Fremont, CA 94539, USA
Specifications may vary and are subject to change. For certified drawings and specifications, please contact a TEMCo representative.