PV0006

PV0006
SPECIFICATIONS
TEMCo ID:
PV0006 BSPP or NPT
Operation:
Normally Closed (Valve opens when energized)
Working Media:
Air, Gas, Liquid, Water
Operation Model:
Direct Lift Piston, Normally Closed
Flow Orientation:
Directional
Body Material:
Engineered Plastic (PA66)
Seal Material:
Viton
Coil Voltage:
110 / 120 VAC
Coil Power:
50/60 Hz 7 VA/ 9 VA
Coil Class:
IP65
Coil Duty:
100% ED (Continuous Duty)
Response Time:
< 20 ms
Electrical Connection:
Wire Leads
Operating Pressure:
28” Hg Minimum
102 PSI Maximum
Operating Temperature:
-5 to 80°C
Port Size:
1/8" Inch BSPP Female Port (May be used with NPT fittings,
but Teflon Tape or thread sealant must be used)
Valve Orifice Size:
2.5 mm
Warranty:
5 Years
No Minimum Operating Pressure
Unlike Servo Action valves, there is no minimum required pressure to operate. The valve will operate correctly all the way
down to 0 PSI.
Direction of Flow
These valves are directional, meaning the source of pressure must always be oriented to the inlet side of the valve.
www.temcoindustrial.com
Phone: (510) 490-2187
Fax: (510) 490-1507
48621 Warm Springs Blvd
Fremont, CA 94539, USA
Specifications may vary and are subject to change. For certified drawings and specifications, please contact a TEMCo representative.
PV0006
DIMENSIONAL DIAGRAM
All dimensions in inches.
2.41
2-M4 x 0.7mm (0.0276”)
1/8”
0.39
0.63
1.61
www.temcoindustrial.com
Phone: (510) 490-2187
Fax: (510) 490-1507
48621 Warm Springs Blvd
Fremont, CA 94539, USA
Specifications may vary and are subject to change. For certified drawings and specifications, please contact a TEMCo representative.