our novelties flyer as PDF file - Scheu

Novelties2015
Orthodontics
CA® CLEAR ALIGNER
Dental Sleep Medicine
Pressure Moulding Technique
Laboratory Equipment
Kieferorthopädie
Orthodontics
STEADY-RESIN Neon Monomers
Coloured neon monomers ready for use with STEADY-RESIN
S, M and VARIO and DURASPLINT® polymers. For streak-free,
translucent results.
STEADY-RESIN Neon Monomers
STEADY-RESIN Neon Monomers
STEADY-RESIN Neon Monomers
STEADY-RESIN Neon Monomers
STEADY-RESIN Neon Monomers
STEADY-RESIN Neon Monomers
neon pink
neon red
neon yellow
neon green
neon blue
neon orange
#8350
#8357
#8358
#8359
#8360
#8361
100/250 ml
VECTOR® 440 R
Delicate skeletal sector expansion screw with yellow directional arrow for single tooth or segment movements.
W
H
H
VECTOR® 440 R
#2513
W × H × L: 6.0 × 3.0 × 13.3 mm expansion: 5.5 mm
L
10/50 pcs.
VECTOR® 740 / VECTOR® 750 acc. to Bertoni
Modified, angled and delicate special screw acc. to Bertoni for
insertion in multi-sector plates. VECTOR® 740 allows separate
protrusion and symmetric transverse expansion, whereas
VECTOR® 750 enables separate protrusion and transverse
expansions by means of two spindles, working independently
from each other for bilateral expansion.
L
H
W
VECTOR® 740
#2540
W × H × L: 15.0 × 5.0 × 15.0 mm expansion: 2.5 mm
VECTOR® 750
#2542
W × H × L: 15.0 × 5.0 × 15.0 mm expansion: 2.5 mm
2 pcs., illustration shows VECTOR® 750
H
L
W
VECTOR® 900
Screw for insertion in protrusive double plate for treatment
of Angle Class II cases (lower jaw retrusion/distal occlusion)
as well as for bilateral expansion of the upper jaw in growing
children. Compact design with integrated expansion screw
incl. security expansion key and SD-Box. For lower jaw we
recommend the combined use with VECTOR® 100.
VECTOR® 900
#2536
W × H × L: 14.0 × 20.0 × 13.0 mm expansion: 5.0 mm
Angle tester acc. to Adamik
#2332
For fixing and controlling the insertion angle
1/10 pcs.
2
®
CAKieferorthopädie
CLEAR ALIGNER
CA® SMART
The enhancements made to the CA® SMART software offer
new possibilities for tooth movements in the CA® Set-Up
technique. The new data base and the new user administration integrated in version 4.0 allow simultaneous use for
multiple users. Besides occlusal and frontal images, the new
height adjustment additionally allows taking lateral vestibular
images. Comes with CA® web cam.
System requirements
From Windows 7 Service Pack 1, USB port 2.0, OpenGL
version 2.0 and DirectX 9.0c, monitor with resolution of min.
1204 × 768 px, mouse with scroll wheel
CA® SMART
#5311
CA® Photo Support
The stable height adjustable support for the CA® web cam
enables reproducible documentation of occlusal and frontal
images.Technical precondition and separate accessory for the
CA® SMART software. CA® photo support comes with calilbration plate.
Dimensions (W × H × D): 180 × 210 × 195 mm
CA® Photo Support
Auxiliary Set (4.0) for CA® Photo Support
#5312
#5313
CA® TIP 3
Pliers with oval plateau, enabling creation of activation
surfaces in CA® splints. Stainless steel, sterilisable.
CA® TIP 3
#5292
CA® TIP 4
Pliers for torque control with curved plateau, enabling
creation of labial/lingual activation surfaces in CA® splints.
Stainless steel, sterilisable.
CA® TIP 4
#5295
3
CA® CLEAR ALIGNER
CA® POWER GRIP
CA® POWER GRIP forms enable fabrication of individual attachments for the CA® CLEAR ALIGNER technique. Nine different
forms are included in the set which can be filled with light-cured
composite for direct application on the prepared tooth.
CA® POWER GRIP MFM u
MFM (Multifunctional Forced Movement): Used for extrusion,
mesial and distal rotation. For use with CA® splints and elastics.
CA® POWER GRIP MDI v
MDI (Mesial/Distal lnclination): Enables setting upright frontal
teeth, is used for mesial/distal inclination.
CA® POWER GRIP DMI w
DMI (Distal Mesial Inclination): Enables setting upright frontal
teeth, is used for distal/mesial inclination.
CA® POWER GRIP FALA x
FALA (Force Application LABIAL): Used for protrusion, retrusion
and torque control up to 3°. For fabrication of activation surfaces
on the teeth in the gingival area with labial positioning – for teeth
11, 13, 21, 23, 33 and 43.
CA® POWER GRIP FALI y
FALI (Force Application LINGUAL): Used for protrusion, retrusion
and torque control up to 3°. For fabrication of activation surfaces
on the teeth in the gingival area with labial, lingual and palatal
positioining – for the teeth 12, 22, 31, 32, 41 and 42.
CA® POWER GRIP BUB z
BUB (Build-Up Bicuspid): Round pad for molars (3 × 3 mm) for
occlusal bite elevation (approx. 2 mm).
CA® POWER GRIP BUM {
BUM (Build-Up Molar): Round pad for molars (3 × 5 mm) for
occlusal bite elevation (approx. 2 mm).
NEW!
CA® POWER GRIP BUAS |
BUAS (Build-Up Anterior Small, width 2 mm): Used as intrusion
plateau for treatment of deep bite. Helps to maintain the intrusion
forces while the patient is not wearing the CA® CLEAR ALIGNER,
permitting molar extrusion.
NEW!
CA® POWER GRIP BUAL }
BUAL (Build-Up Anterior Large, width 4 mm): Also used as intrusion plateau for treatment of deep bite, its width being adjusted
to front teeth with a larger palatal surface.
CA® POWER GRIP Set
Set comes with 2 holders and 18 silicone forms
(9 versions, 2 pcs. each, instruction and CD)
CA® POWER GRIP MFM u*
CA® POWER GRIP MDI v*
CA® POWER GRIP DMI w*
CA® POWER GRIP FALA x*
CA® POWER GRIP FALI y*
CA® POWER GRIP BUB z*
CA® POWER GRIP BUM {*
CA® POWER GRIP BUAS |*
CA® POWER GRIP BUAL }*
CA® POWER GRIP holder *
Stainless steel, sterilisable
* 2 pcs.
4
#5338
#5330
#5331
#5332
#5333
#5334
#5335
#5336
#5337
#5339
#5340
CA® CLEAR ALIGNER
CA® Stripping Tools
Sterilisable instruments for interproximal enamel reduction
(IER), diamond coated on one or both sides. Available in
12 versions, coating on left, right or both sides. Additional
CA® Stripping Tool with extremely fine and smooth diamond
coating (15 µm) on both sides available for polishing.
For safe use of CA® Stripping Tools without OS-hand-piece
we recommend using the stainless steel, sterilisable holder
ensuring quick and easy replacement of tools.
diamond
particle size
90 µm
60 µm
40 µm
25 µm
15 µm
colour
green
grey
red
white
yellow
diamond
diamond
diamond
coating left coating right coating both
#5342
#5345
#5348
#5351
–
#5343
#5346
#5349
#5352
–
CA® Stripping Tool stainless steel holder
#5344
#5347
#5350
#5353
#5354
#5355
Echarri PST Set
Set acc. to Dr. Echarri for use in the Progressive Stripping
Therapy (PST) containing 5 CA® Stripping Tools of various
diamond particle sizes, diamond coated on both sides.
Ensures a very smooth enamel surface when using an
OS-hand-piece, sterilisable.
Echarri PST Set
#5341
Comes in aluminium case containing 1 CA® Stripping
Tool in 90 μm (green), 60 μm (grey), 40 μm (red), 25 μm
(white) and 15 μm (yellow) and CA® Gauge
5
Dental Sleep Medicine
CLEAR-BLOKKER®
Light-curing, high-transparent gel for adjusting pressure
moulded DURAN® splints, reinforced with DURASPLINT® LC.
Gel is best suited for removal of air inclusions and insertion of
canine guidance. Allows fixing of elements, such as IST® fixing
elements on DURAN® splints. UV LED lamp with wavelength
of 360–420 nm or light-curing oven, such as LC-6 Light Oven
(see p. 9), as well as LC-Primer (see p. 9) are required for
polymerisation.
CLEAR-BLOKKER®
4× 1.5 g, 2× micro cannula and 8× mini cannula
#5261
myTAPTM
Diagnostic testing appliance for getting acquainted with the
simple and patient-friendly treatment of snoring and sleep
apnoea. Metal-free and easy adjustable trays enable protrusion up to 20 mm, assuring considerable lateral mobility.
myTAPTM
#9070
Upper and lower jaw protrusion tray with 2 nuts,
storing box and instruction
DURASOFT® pd blue
The proven break and abrasion resistant compound material,
now available in blue-translucent colour.
Application
For simple fabrication of coloured intraoral ant-snoring appliances. Blue colour increases aesthetics.
1.8 × 125 mm
#3347
2.5 × 125 mm
#3348
10 pcs.
6
Pressure Moulding Technique
DURAN®+ A2
New material in proven DURAN® quality, now available in
aesthetic colour (A2). With integrated insulation foil, no predrying.
Application
Tooth-coloured temporaries, splints for planning and
demonstration for aligner treatments, tooth-coloured
telescope caps for prosthetic repairs
0.5 × 125 mm
0.75 × 125 mm
#3422
#3423
10 pcs.
NEW COLOUR!
DURASOFT® seal
Pressure moulding material made of thermoplastic polyurethane for use with DURASOFT® pd, forms a robust inner
layer of hard/soft splints providing good resistance against
discolouration. Also available in blue and magenta.
Application
Discolouration-resistant inner layer for DURASOFT® pd
splints, especially for long-term use splints such as intraoral
anti-snoring appliances.
0.1 × 125 mm
0.1 × 125 mm
0.1 × 125 mm
clear
blue
magenta
#3338
#3339
#3337
10 pcs.
NEW COLOUR!
SIL-KITT
Permanently plastic transparent silicone, used in particular
for blocking-out undercuts in pressure moulding splints, antisnoring and orthodontic appliances. Also available in red.
SIL-KITT red, 150 g
SIL-KITT transparent, 150 g
#3442
#3443
7
Pressure Moulding Technique
DURASPLINT® LC
Light-curing, high-transparent resin, in particular for adjusting DURAN® splints. Doesn’t require curing in pressure pot.
We recommend LC-6 Light Oven with pre-set polymerisation
times of 5 or 10 min. Curing in the range of 350–450 nm.
No yellow discolouration of material after light-curing.
All components of DURASPLINT LC Kit can be ordered
separately.
®
DURASPLINT® LC Kit
Kit comes with 3 bars of totally 40 g DURASPLINT®
LC, 1.5 g CLEAR-BLOKKER® with 2 mini
cannula, 10 ml LC-Primer with brush, 10 g
LC-Insulation, 1× LC-Bur A and B, 1× SDPolishing Paste A and B, 5× SD-Polishing
Brush, SD-Felt Wheel and SD-High-Gloss
Polishing Mop with mandrel
DURASPLINT® LC, 3 bars of totally 40 g
W × L × H: 32 × 120 × 8 mm
CLEAR-BLOKKER®
4× 1.5 g, 2 micro cannula and 8 mini cannula
LC-Primer, 10 ml, with brush
LC-Insulation, 10 g
LC-Bur A
LC-Bur B
SD-Polishing Paste A, bar of 60 g
SD-Polishing Paste B, bar of 100 g
SD-Polishing Brush with mandrel
SD-Felt Wheel with mandrel
SD-High-Gloss Polishing Mop with mandrel
#3256
#3261
#5261
#3263
#3266
#3267
#3268
#3710
#3711
#3712
#3713
#3714
LC-6 Light Oven
High-capacity light polymerisation unit for up to 4 models or
fixator. Its inner dimensions of 170 × 160 × 120 mm
(W × D × H) offer enough space for articulated and mounted
models. 6 fluorescent light tubes (3 UVA and 3 blue light
tubes) and an aluminium reflector guarantee homogeneous
illumination. 2 polymerisation times of 5 and 10 min. are
already pre-set in accordance with the light-curing material
DURASPLINT® LC. Continuous operation can also be set.
Spectral range between 350 and 450 nm. Auto start function
for easier application.
LC-6 Light Oven 230 V
LC-6 Light Oven 115 V
#5610
#5620
9
Laboratory Equipment
Parallelometer
Indispensable auxiliary for fabricating precise adjusted
splints, for fixing the insertion direction and marking the
tooth equator. It is essential to make sure the extension of an
adjusted splint made of DURAN®/DURASPLINT® LC doesn’t
exceed the tooth equator, as otherwise cracks or fissures
may occur when inserting or removing the splint.
Parallelometer
#5362
with model holder, accessories and graphite leads
BIOSTAR®
Versatile pressure moulding machine for all applications in
dental pressure moulding and orthodontics with scan technology and 6.0 bar working pressure. The unique thermally
controlled infrared heater reaches working temperature in
one second. All important data such as temperature, heating
and cooling times are programmed by reading the scanner or
entering the corresponding code. The coloured 3.2˝ LCD display with a resolution of 320 × 240 pixel leads you through
the single working steps of the pressure moulding process,
providing further information on the scanned material, its
indication as a well as a library with illustrated application
hints for fabrication. USB port for trouble-free updates. Large
model cup facilitates embedding of mounted models. Pellet
container ensures optimum dispensing and storing of pellets.
Power: 230/115/100 V, 850 W
Working pressure: 0.5 – 6.0 bar
Dimensions (W × H × D): 450 × 230 × 260 mm
Weight: 14 kg
BIOSTAR® 230 V
BIOSTAR® 115 V
BIOSTAR® 100 V
BIOSTAR® protection cover made of
transparent plastic material, avoids soiling
#3001
#3011
#3021
#3449
The coloured 3.2 ˝
LCD display allows an
intuitive operation of
the device during the
fabrication process.
10
Model Platform, Ø 85 mm
IMPRIMO® 90
The 3D printer IMPRIMO® 90 is the generative production
solution for the digital orthodontic laboratory. With its extensive
management software for the complete building process
and the high-performance UV-LED radiation source (382 nm)
the IMPRIMO® 90 is best suited for the fabrication of dental
models. Thanks to numerous pre-defined software tools it is
very user-friendly. The well-dimensioned building platform of
75 mm × 125 mm × 100 mm allows fabrication of models
up to 75 mm. The unit has a lateral resolution of 94 µm and
z-axis resolutions of 25 to 100 µm. The innovative tray system
Laboratory Equipment
Model Platform
Model platform with 85 mm diameter provides increased
surface for dental arcade models, preventing the model
from getting pressed into the stainless steel pellets.
#3134
guarantees short cleansing times and low maintenance. The
integrated colour LCD allows you to control the complete building
process from start to finish. Building projects can be stored
completely in the system. No computer connection is required
after data transfer.
Outer dimensions (W × D × H): 564 mm × 353 mm × 510 mm
Weight: 23 kg
IMPRIMO® 90
IMPRIMO® LC M
#6500
#6502
11
GB 2.500/02/15 G REF 0310.02
More information:
SCHEU-DENTAL GMBH
www.scheu-dental.com
Phone +49 2374 92 88-0
Fax
+49 2374 92 88-90
Am Burgberg 20
58642 Iserlohn · Germany