Vindicator 5.50m Centre Console Brochure ()

Vindicator Quality Aluminium Boats & Trailers®
Watson’s Marine Centre, 52 Wickham Street, Gympie - QLD - 4570.
PHONE (07) 5482 2135 ----- FAX (07 ) 5482 7920
ABN No 89-081-785-935
- ACN No 081 - 785 - 935
E-Mail - [email protected]
Wed Address – www.watsonsmarine.com.au
5.5 MTR
VINDICATOR CENTRE CONSOLE
SPECIFICATIONS
(Measurements & Weight are subject to variation)
Measurements
Length:- 5.50m
Length Overall:- 6.00m
Beam:-2.45m
Material Thickness
Bottom & Transom:- 5mm Plate
Sides & Topsides:- 4mm Plate
Floor:- 4mm
Weight:- Approx 850kg
Horsepower Rating
Maximum Recommended:- 150hp
Maximum Transom Weight:- 240KG
Number of People:- 6 Smooth Water Only
Internal Depth – Floor to Gunwhale:- .72m
Depth:-1.40m
Deadrise:- 17 `
STANDARD FEATURES  5 Years Dry Storage Construction Warranty.
 3 Water Tight Compartments filled with Survey Foam
 Anchorwell
 Bow Sprit & Bow Roller.
 Bow Eye.
 Cleat on Front Deck.
 Bollard on Each Corner at Rear.
 Side Pockets with Edge Trim.
 Centre console with Lexan Windscreen.
 Seat Box with Upholstered Lid.
 Swim Transom .
 Wide Side Deck.
 Split Bow Rail, Side Rails & Rear Rails.
 Hydraulic Steering & Steering Wheel.
 Under Floor Fuel Tank & Deck Fill– 180 ltr Approx. - Larger Available
 Survey Fuel Tank Sender Unit, Gauge, Hoses, H/D Hose Clamps.
 Live Bait & Deck Wash
 Fully Self Draining 4mm Aluminum Floor with 2 Alloy Scuppers.
 Under Floor Kill Tank.
 Fuel Filter / Water Separator System, Hoses & Connections.
 5 Large Welded Bung Bases & Bung
 4 Alloy Rod Holders
 Trim Tab Plates welded to rear of vessel
 Binnacle Controls
 Ribbed Carpeted Floor.
 Deluxe Two Pack & Non Skid Deck.
 Battery Shelf with covers.
 Anchor Tube on Front Rail.
 Custom Stripe and Registration Letters to match Stripe.
 Single or Dual Engine Transom Installation.
ELECTRICAL All Fitted with Tinned Wiring & Shrink Tube Terminals
 Bilge Pump Hose & Skin Fitting.
 Navigation Lights Port & Starboard.
 360` Anchor Light.
 6 Row Switch Panel.
 Compass.
 Cigarette Lighter Socket.
OPTIONAL EXTRAS:‫ ۝‬UPGRADE TO DOUBLE FLIP BACK SEAT
‫ ۝‬LIVE BAIT TANK & DECK HOSE COMBO
‫ ۝‬VHF RADIO & AERIAL
‫ ۝‬27MG RADIO & AERIAL
AM/FM RADIO & AERIAL
‫۝‬
‫ ۝‬GPS / COLOUR MAP or LCD ‫ ۝‬SOUNDER / COLOUR or LCD
‫ ۝‬DUAL BATTERIES, ISOLATOR SWITCH & BATTERY BOXES
‫ ۝‬LARGE GLOVE BOX IN CONSOLE
‫ ۝‬RED LED UNDER GUNWHALE LIGHTS ( For Night Fishing)
‫ ۝‬COCKPIT SIDE BUMPER KNEE RAIL CUSHIONS
‫ ۝‬TRANSOM DOOR
‫ ۝‬REAR TELESCOPIC LADDER
‫۝‬
REAR QUARTER STEP
‫ ۝‬LIVE BAIT & DECK WASH COMBO
‫۝‬
DELUXE BAIT BOARD -Nylon Cutting Board, Bait Tank & 6 Rod Holders
‫ ۝‬UNDER GUNWHALE LED RED DECK LIGHTS, wiring & switch (For Night Fishing)
‫ ۝‬TACKLE TRAY BOX- Built into Seat Box
‫ ۝‬FIRE EXTINGUISHER FLUSH MOUNT BOX with or without Door
‫ ۝‬EPIRB FLUSH MOUNT BOX with or without Door
‫ ۝‬TARGA BAR & CANOPY
‫ ۝‬TARGA BAR & CANOPY- EXTENDED
‫ ۝‬DELUXE ENGINE COWL COVERS
‫ ۝‬FULL CENTRE CONSOLE COVER
‫۝‬
SEAT COVER
‫ ۝‬POWER WINCH ON TRAILER
‫ ۝‬TRAILER SPARE WHEEL & SPARE WHEEL CARRIER
‫ ۝‬BUDDY BEARINGS ON TRAILER WHEELS
‫ ۝‬SAFETY KIT – OFFSHORE WATERS / INSHORE WATERS
‫ ۝‬REAR LED SPOT LIGHTS
‫ ۝‬LED HARD TOP / CANOPY LIGHT
‫ ۝‬CARPETED ALUMINIUM HARD TOP WITH RADIO CONSOLE &
SPEAKER BOXES
‫ ۝‬T – TOP LARGE – FULL SIZE
‫ ۝‬T- TOP SMALL – OVER CONSOLE
‫ ۝‬FRESH WATER TANK, SHOWER & HOSE ASSY
‫ ۝‬VINDICATOR QUALITY ALUMINIUM TRAILER
OPTIONAL EXTRAS & STD ACCESSORIES
Stainless Steel Folding Ladder
Rear Transom Door
Flip Back Seat / Storage Hatches & Shelf
Wheel - Glove Box - GPS & Sounder
Cockpit Side Bumper Rails
Built In Tackle Tray
VHF Radio - AM/FM Radio - Binnacle Controls
Std Bait Board
Targa Bar & Canopy / T Top
Targa Bar & Canopy Extended
Engine Cowl Covers
Deluxe Bait Board
Full Console Cover
Vindicator Quality Aluminium Boats - Proudly Australian Made
Vindicator Quality Aluminium Boats & Trailers
are built in Gympie 45minutes north of Noosa on the Sunshine Coast
by Watson’s Marine Centre
Our range of boats are naval architectural designed by one of the leading Queensland designers,
allowing a router cutting process, providing the highest accurate & efficient cost effective
means of building these vessels.
A fine team of certified craftsman assures personal service from the building of your vessel to the finished
product & beyond.
We only use the finest of materials - the 5000 series marine grade alloy
specifically made for full time salt water applications
5mm bottoms, 4mm sides & 4mm floor - making Vindicator Boats extremely strong
The ride is extreme, smooth, dry & very stable; emphasis is placed on crew comfort.
You must test drive a Vindicator Boat to appreciate there many attributes.
Our Range of Vindicator Boat designs.
5.5m Centre Console- 5.5m Cuddy Cabin - 5.8m Centre Console – 5.8m Half Cabin
- 6.2m Half Cabin - 7.2m Half Cabin
All measured to survey length.
With over 40 years experience in the boating industry, fishing inside & outside waters of the
Queensland Coast, crossing many bars & launching boats from the beach into the surf.
We believe this vessel is one of the best quality boats, total safety for you & your family.
For More Information Contact
Frank & Glenn Watson …….Phone 07 – 54822135