Major Mfg. - Asset Sales

SURPLUS MACHINERY TO A
MAJOR MANUFACTURER
BORING MILLS, PLANERS, SLOTTERS, LATHES, ETC.
34000 SOUTH LOOP – ESSINGTON, PA 19029
BIDDING BEGINS TO CLOSE TUESDAY, MAY 15TH @ 1:00 P.M. EDT
Inspection
Monday,
May 14th
9:00 A.M. to
3:00 P.M. EDT
>
LOT 3:
BULLARD
DYNATROL 46”
VERTICAL BORING
MILL
<
LOT 1:
ROCKFORD 20”
HYDRAULIC
VERTICAL SLOTTER
LOT 4: LUCAS MODEL 41B-48 4” TABLE TYPE HORIZONTAL BORING MILL
Asset Sales, Inc.
Corporate Headquarters
301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325
www.asset-sales.com [email protected]
LOT 11: WATSON STILLMAN 400 TON HYDRAULIC WHEEL PRESS
European Headquarters
Unit 7, Branxholme Industrial Estate, Bradford Road,
Brighouse, West Yorkshire, HD6 4EA, England, UK
Tel 1484.401.906 Fax 1484.715.327
[email protected]
Asset Sales (Canada) Inc.
4310 Prospect Road
Bayside, Nova Scotia, Canada B3Z1L5
Tel 902.852.5331 Fax 704.821.4325
[email protected]
AUCTION SALE DATE & TIME – BIDDING BEGINS TO CLOSE TUESDAY, MAY 15TH @ 1:00 P.M. EDT
<
LOT 5:
CARLTON
4’ X 13”
RADIAL DRILL
>
LOT 4:
LUCAS
MODEL 41B-48
4” TABLE TYPE
HORIZONTAL
BORING MILL
<
LOT 3:
BULLARD
DYNATROL 46”
VERTICAL BORING
MILL
>
LOT 1:
ROCKFORD 20”
HYDRAULIC
VERTICAL
SLOTTER
LOT 1: ROCKFORD 20” Hydraulic Vertical Slotter with
Maximum Stroke 22”, Table Diameter 28”, Table Travels
26” x 26”, Maximum Height Under Ram Guide 24”,
Maximum Height Table to Ram 40”, Cutting Speeds 25100 FPM, sn:81-SA-16
LOT 2: CINCINNATI VERCIPOWER Model #425-20
Horizontal Mill with Over Arm Vertical Attachment, Table
Size 20” x 86.5”, No. 50 Taper, Table Travel 42”, Vertical
Travel 24”, Speeds 14-1400 RPM, Pendant Control, 3-Axis
Acu-Rite Millvision D.R.O., sn:9J45H5S1
LOT2A: Vidmar Cabinet 9-Drawer with Assorted End Mills,
50 Taper Tooling, Drills & Set Up Hardware for Cincinnati
Vercipower
<
LOT 2:
CINCINNATI
VERCIPOWER
MODEL #425-20
HORIZONTAL
MILL
Swivel Turret Head On Rail, R.H. Side Head, Hardened
Ways, Pendant Control, 2-Axis Acu-Rite Turnvision DRO.,
50 HP AC Drive, Size-AU-Trol On Ram & Side Head,
sn:31986
LOT 4: LUCAS Model 41B-48 4” Table Type Horizontal
Boring Mill with Spindle Taper No.50, Table Size 36” x 62”,
Cross Travel 48”, Vertical Travel 36”, Longitudinal Table
Travel 54”, Speeds 13 to 1500 RPM, Full Multiple Pendant
Control, Built-In 4-Way Bed, 10 3-Axis Acu-Rite Millvision
D.R.O., sn:41B2005
LOT 4A: Quantity of 50 Taper Tooling
LOT4B: Cabinet with Quantity of Set up Hardware
LOT2B: Milling Vise 8.5” Wide with Maximum Opening
8.5”, Overall Dimensions 28’’ Long x 12’’ Wide x 6’’ High
LOT4C: 23” LUCAS Facing Head with 4” Hole Diameter,
4-Bolt Holes, 4.75” Between Hole Centers, Equipped with
Boring and Facing Tool Holder
LOT 3: BULLARD DYNATROL 46” Vertical Boring Mill
with, Table Diameter 46”, Swing with Side Head in Position
49”, Swing with Side Head Below Table 58”, Height Under
Rail 40”, Turret Slide Vertical Travel 26”, Side Head
Horizontal Ram Travel 24”, Table Speeds 9-313 RPM, 4Jaw Chuck with Set of Hard Top Jaws, Turret Tooling,
LOT 5: CARLTON 4’ x 13” Radial Drill with Removable
Right Angle Base, T-Slotted Base, No.4 M.T., Rapid
Traverse, Power Clamping, Speeds 15 to 1500 RPM, 10
HP Motor, Coolant, Quantity of Morse Taper Tooling,
sn:3A3664 (box table not included available separately)
2
LOT 5A: T-Slotted Box Table 24” x 30” x 24” H
INSPECTION – MONDAY, MAY 14TH FROM 9:00 A.M. – 3:00 P.M. EDT – CLOSE OF SALE BY APPOINTMENT ONLY
LOT9A: POREBA 28” x 244” Gap Bed
Lathe Model TR70B with Maximum
Swing 27.55”, Maximum Swing in Gap
38”, Swing Over Cross Slide 15.75”,
Spindle Bore 3.25”, 1000 RPM, 12/20
HP, 15.5” 3-Jaw Chuck, 4-Way Tool
Post, 10.5” Roller Steady Rest, 5.75”
Follow Rest, Inch & Metric Threading,
sn:1105-1655
<
LOT9A:
POREBA 28” X 244”
GAP BED LATHE
LOT 6: MONARCH DYNASHIFT 20” x 102” cc Engine Lathe with Maximum
Swing 21”, Speeds 12-1500 RPM, Hard Bed, Taper Attachment, 15’’ 4-Jaw
Chuck, 6’’ and 12’’ Roller Steady Rest , Thread Dial, Boring Bar Holder, 4-Way
Tool Post, 2-Axis Acu-Rite Turnvision D.R.O., Live Center , Coolant, sn:51348
LOT 7: LEBLOND REGAL 19” x 54” cc Servo Shift Lathe with Speeds 45-1800
RPM, Camlock Spindle, Aloris Tool Post, Taper Attachment, Hard Bed, Thread
Dial, 10’’ 4-Jaw Chuck, Live Center, 6’’roller Steady Rest, 2-Axis Acu-Rite
Turnvision D.R.O., Coolant , Live Center, sn:8E-2862
LOT 8: SOUTHBEND TURN-NADO 17” X 36” cc Lathe with Speeds 30 to 1580
RPM, Hard Bed, 10’’- 3- Jaw Chuck, Taper Attachment, 3-Tool Holders, Collet
Chuck, Camlock Spindle, Carriage Stop, 6’’ Steady Rest, Thread Dial, Live
Center, Quantity Lathe Collets, sn:GHB101GJ
LOT 9: MONARCH DYNASHIFT 24” x 102” cc Lathe with Maximum Swing 25”,
Speeds 14-1750 RPM, Hard Bed, Taper Attachment, 18’’ 4-Jaw Chuck, 6’’ and
12’’ Roller Steady Rest, Camlock Spindle, (2) Tool Posts, Boring Bar Holder,
Thread Dial, Pan Bed with Coolant Live and Dead Centers, 20 HP, sn:40782
LOT 10: SELLERS 98” Diameter Motorized Rotary Table with T-Slotted Table,
Overall Height 41”, (2) Lifting Ears, 250 Volt DC Variable Speed Drive with
Control, sn:1308
LOT 9: MONARCH DYNASHIFT 24” X 102” CC LATHE
LOT 6: MONARCH DYNASHIFT 20” X 102” CC ENGINE LATHE
LOT 8: SOUTHBEND TURN-NADO 17” X 36” CC LATHE
<
LOT 7:
LEBLOND
REGAL
19” X 54” CC
SERVO SHIFT
LATHE
3
LOT 10: SELLERS 98” DIAMETER MOTORIZED ROTARY TABLE
AUCTION SALE DATE & TIME – BIDDING BEGINS TO CLOSE TUESDAY, MAY 15TH @ 1:00 P.M. EDT
Want to Sell Your Shop or Know
Someone Who Does? Call Us Toll
Free at (888) 800-4442! We Pay
Great Finder’s Fees!
WWW.ASSET-SALES.COM
LOT 11: WATSON STILLMAN 400 Ton Hydraulic
Wheel Press with Maximum Capacity 400 Tons,
Stroke of Cylinder 24”, Distance Between Strain
Bars 72”, Ram Diameter 12”, Maximum Cylinder
to Resistance Block 254”, No. Adjustment Holes
16, Hydraulic Pump, Tonnage Indictor, Resistance
Block, End Support, (2) Adjustable Hanging Work
Supports, sn:62R-5612
LOT 12: GOULD & EBERHARDT 28” Horizontal Shaper with 7.5 Hp, S/N
7005/A18 With Swivel Vise With Handle, 16’’ Wide, 12’’ Max Opening,
Overall Dimensions S 18’’ Wide X 32’’ Long X 9’’ High
400
TON
LOT 11: WATSON STILLMAN 400 TON
HYDRAULIC WHEEL PRESS
LOT 13: BRIDGEPORT 2 HP Series I Variable Speed Vertical Mill with
Taper R-8, 9” x 42” Power Feed Table, Variable Speeds to 4200 RPM,
Swivel Bridgeport Milling Vise, 2-Axis Acu-Rite Millvision D.R.O., Work
Light, sn:206047
LOT 13A: Vidmar Cabinet 9-Drawer with contents
LOT 14: DO-ALL #3613 Vertical Bandsaw with 175” Blade Length, 36”
Throat, 44 Volt, Blade Speed & Tension Indicators, Work Light, Auto
Feed, sn:151-66391
LOT 15: WILTON STRAND 24514 Drill Press with 21” x15.25” T-Slotted
table, 16.5” x 15.25” T-Slotted Table Base, 6” Spindle Travel, 85-1460
RPM, Feeds 0.015, 0.010, 0.007. 0.004 FPM, 1.8/2.2 KW Motor, 460 Volt,
sn:88836
LOT 16: GIDDINGS & LEWIS 60” x 60” 60 RT T- Slotted Rotary Table
with (6) T-Slots, Distance Between T-Slots 10”, Width of T-Slot 1” x 1.75”,
Table Work Height 12”, Manual Clamping, Manual Scale, sn:040-35-55
LOT 17: Bullard 36” Dynatrol with 48” Swing, 30.5” Under Cross Rail, 300
RPM, 30 HP, 36” 3-Jaw Chuck, Turret, Side Head, Threading Attachment,
Chrome Ways, sn:31325
<
LOT 13: BRIDGEPORT 2 HP SERIES I
VARIABLE SPEED VERTICAL MILL
LOT 17: BULLARD 36” DYNATROL
4
LOT 14: DO-ALL #3613 VERTICAL
BANDSAW
INSPECTION – MONDAY, MAY 14TH FROM 9:00 A.M. – 3:00 P.M. EDT – CLOSE OF SALE BY APPOINTMENT ONLY
LOT 18: (3) V-Blocks - Length of V 22.5", Depth of V 11",
Width of V8", Bottom Length of V1.25", Height from Floor to
Bottom of V 28.5", Base Size 37'' x 12'', Dimensions 37" x
12" x 39.5" H, Weight of Each Block 1500 Lbs
LOT 19: (2) V-Blocks - Length of V 16" ,Depth of V 8",
Width of V 7.5", Bottom Length of V 1", Height From Floor
To Bottom of V28", Base Size 37" x 12", Dimensions 37" x
12" x 36" H, Weight of Each Block 1100 Lbs
LOT 20: (1) V-Block - Length of V 16", Depth of V 8",
Width of V 6.5", Bottom Length of V 1", Height From Floor
To Bottom of V28", Base Size 14.75" x 36.5", Dimensions
37" x 14.5" x 36" H, Weight of Each Block 1500 Lbs
LOT 21: (2) V-Blocks - Length of V 37.5", Depth of V 16",
Width of V 12.5", Bottom Length of V6", Height From Floor
To Bottom of V 10.5", Base Size 51" x 18", Dimensions 51"
x 18" x 26" H, Weight of Each Block 2400 Lbs
LOT 22: (5) Set Up Tables/Parallels, 11.5’’ x 7’’x 60’’ Long,
1’’ x 3’’ Long Slots
LOT 22A: (5) Set Up Tables/Parallels, 11.5’’ x 7’’x 60’’
Long, 1’’ x 3’’ Long Slots
LOT22B: (5) Set Up Tables/Parallels, 11.5’’ x 7’’x 60’’ Long,
1’’ x 3’’ Long Slots
LOT22C: (7) Set Up Tables/Parallels, 11.5’’ x 7’’x 60’’ Long,
1’’ x 3’’ Long Slots
LOT22D: (1) Set Up Tables/Parallels, 11.5’’ x 7’’x 70’’ Long,
1’’ x 3’’ Long Slots
LOT22E: (1) Set Up Tables/Parallels, 11.5’’ x 7’’x 54’’
Long, 1’’ x 3’’ Long Slots
LOT22F: (2) Set Up Tables/Parallels, 11.5’’ x 7’’x 47’’ Long,
1’’ x 3’’ Long Slots
LOT22G: (2) Set Up Tables/Parallels, 9’’ x 6’’ x 60’’ Long,
1’’ x 3’’ Long Slots
LOT22H: (1) Set Up Tables/Parallels, 8’’ x 5’’ x 60’’, Long,
1’’ x 3’’ Long Slots
LOT22I: (2) Set Up Tables/Parallels 11.5’’ x 7’’ x 90’’ Long,
1’’ x 3’’ Long Slots
LOT 23: Acorn Table - 59.5’’ x 57.25’’, Table Height 30’’,
1.5’’ Squares, 2800 lbs, Table Thickness 2.5’’
LOT 24: LINCOLN Powerwave 450 Mig Welder with 450
Amp 3-Phase 50 / 60 HZ, Wire Feeder Speed Range 50770 IPM, Wire Size – Solid Electrode 0.6” – 1/16”,
Powerwave 450 Power Unit, Synergic 7 Wire Feeder with
Cable Gun
LOT 25: 48" T-Slotted Manual Rotary Table with
48”Diameter ,Table Height 7.5", Number Of T-Slots 6, TSlot Top 1.187", T-Slot Bottom 1.437", Scale Increments 1
Degree, Manual Clamping, Scale
LOT 26: Quantity of DAVIS Tooling - GIDDINGS & LEWIS
Davis Facing Heads, 2" Straight Shank Tool Holder, 50
Taper Tool Holders, Adjustable Finish Blades 3.5” – 22”,
Roughing Blades 3.975” – 20.25”
LOT27: INGERSOLL Right Angle Head wtih13” Reach, 21”
Overall, 21” Width, Ingersoll Standard Taper In, Threaded
Taper Out
ABBREVIATED TERMS & CONDITIONS OF AUCTION
Your participation and bidding
are considered a legally binding
contract – It is prohibited to bid
on any item that you cannot pay
for in full by the specified date
or remove by designated date.
Subject to amendments and modifications
announced by Asset Sales, Inc. and
Bidspotter at the time of the auction, any
person participating in the webcast auction
will be bound by the following terms and
conditions. Neither Asset Sales, Inc. nor
Bidspotter
warrant
the
accuracy,
authenticity, description, weight, count or
measure of any listings specified herein.
bidding and invoicing will be in US Dollars
($). All bidders are responsible for all
applicable taxes, in addition a 16% Buyer’s
Premium is implemented for all online
sales.
Rigging/ Removal of sold equipment is the
sole responsibility of the buyer and must be
completed
by
the
posted
date.
Rigging/Removal may not begin until
payment has been made in full and the
auction sale is complete. All heavy rigging
will require a certificate of insurance for
$1,000,000.00 naming Asset Sales, Inc. as
the insured.
ALL ONLINE SALES ARE FINAL, ON AN
“AS IS – WHERE IS,” “IN PLACE,” “WITH
All articles will be sold to the highest
webcast bidder conforming to the bid
process in accordance to the AUCTION
COMPANY’S TERMS & CONDITIONS –
COMPLETE
COPIES
AVAILABLE
AT
WWW.ASSET-SALES.COM. No article shall
be removed unless paid in full and all
articles purchased shall be removed in the
time allocated by Asset Sales, Inc.. No
item, no matter how small or how far the
purchaser has to travel, may be removed
until after the online auction is completely
closed.
All payments shall be by wire transfer. All
5
ALL FAULTS” BASIS.
REGISTRATION & BIDDING ONLINE:
When participating as a buyer via
Bidspotter.com, you must be pre-approved
by Asset Sales, Inc. The pre-approval
process is easy, but necessary. Asset
Sales, Inc. will verify telephone number and
confirm agreement to the Terms and
Conditions.
Anyone outside of the continental
United States will be required to wire
transfer a minimum deposit of $5000
to be approved for all non-onsite
bidding.
Asset Sales, Inc.
Corporate Headquarters
301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079
Toll Free: 888.800.4442 Direct: 704.821.4315
Fax: 704.821.4325 – www.asset-sales.com
Asset Sales, Inc. – Pennsylvania License Number AU003639R
3
AVAILABLE
LOT9A: POREBA 28” X 244” GAP BED LATHE
Warehouse Location:
Industrial Plant Service
34000 South Loop – Essington, PA 19029
For Inspection call Ed Joyce 610-521-5080
Visit our website at www.asset-sales.com to view all of our
Upcoming Auctions, Download Complete Brochures, or to
Register to Bid Online.
Want to join our mailing list? Want to be included in
Email Blasts announcing future auctions? Want to
update your address? Curious to preview machines and
tooling featured in an upcoming auction? Want to
request a brochure? Or want to be removed from our
mailing list?
Just write the info on the back cover of this
brochure and email or fax it to us at:
[email protected] or (704) 821-4325
UPCOMING AUCTIONS
THURSDAY, MAY 17TH – Major Machining Mfg.
Online Only
Gear & Heavy Machining – Lufkin, TX
TUESDAY, MAY 22ND – Werner Industries
Online Only
CNC Machine Shop & Water Jet Facility
Melbourne, FL
THURSDAY, MAY 31ST – Jepson Precision Tool, Inc.
CNC & EDM’S Mold & Dye Shop – Cranesville, PA
THURSDAY, JUNE 14TH – R&D Enterprise Contractors, Inc.
Excavation & Construction Company, Yellow Iron –
Chambersburg, PA
TBA – Fabricating & Machinery Facility
Amada’s, Laser & Fabricating – Vermont
DIRECTIONS – From New Jersey Turnpike (New Jersey)
“LYNYRD SKYNYRD”
Take New Jersey Turnpike SouthMILWAUKEE
to Exit 4 Go Right
Toll .Go
¼ Mile Take I-295 South. Take I-676 Exit
IRONafter
STREET
SURVIVOR
26 Towards Philadelphia. Merge Onto I-76 West to Whitman Bridge. Just After Toll, Take I-95 South To Exit
9A Route 420. Follow signs To Route 291, At the First Light. Make a Left onto 291, At the Next Light Make a
Right onto Jansen, Go Over Railroad Tracks and Make First Left Into Gate. Stay Right Through 1 Stop Sign,
Pass Small Blue Building and the Entrance To Warehouse Will Be on The Right.
HOTEL
Street Address
DIRECTIONS - From The Philadelphia,
PA Airport
City, State Zip Code
Take 95 South To Exit 9A Which Is Route
420. Take
Route 420 To Route 291. *Follow Directions
Telephone
Number
Above. (10 Minutes from Airport)
ONLINE AUCTION
SURPLUS MACHINERY TO A
MAJOR MFG.
Boring Mills, Planers, Slotters, Lathes, ETC.
Essington, PA
BIDDING BEGINS TO CLOSE
TUESDAY, MAY 15TH @ 1:00 P.M. EDT