Jones Stephens Corp. • PlumBest™ • LTConnections™ SECTION F

Transcription

Jones Stephens Corp. • PlumBest™ • LTConnections™
SECTION F - CAST IRON
Closet Flanges & Accessories................................................ 250-251
Drain Bodies........................................................................ 252-253
Spuds & Strainers........................................................................ 254
Assembled Cast Iron Drains.................................................. 255-262
Cleanout Bodies & Spuds...................................................... 263-264
Cleanout Plugs..................................................................... 265-266
Cleanout Cover Plates.................................................................. 267
F
Assembled Cleanouts........................................................... 268-270
Roof Drains................................................................................ 271
General Purpose Drains........................................................ 272-273
Bell Traps.................................................................................... 274
Floor & Cesspool Drains/Grates................................................... 275
Service Sinks & Accessories......................................................... 276
Bar Grates/Sewer Strainers & Boxes............................................ 277
Vent Boxes/Caps/Backwater Valves............................................. 278
Test Tees & Closet Bends............................................................... 279
Gas Burners/Log Lighter Valves/Accessories.......................... 280-281
249
Closet Flanges & Accessories
The Exclusive Two Finger Flange
No Caulk Closet Flange w/Test Cap
Patent #: 5,937,450
• Flush fit
• Redesigned to fit oblong horns
• Made of cast iron
• Pushes easily into cast iron or Schedule 40 DWV pipe
• No tear out or caulking required
• ASTM C-564 rubber gasket
• 3” x 2”, 4” x 2” and 4” x 3”: for areas with the bend close
to the flange
• 3” x 4”, 4” x 4” and 4” x 6”: for areas without the bend
close to the flange or broken pipe
F
PART NO.
C47320
C47340
C47420
C47430
C47440
C47460
DESCRIPTION
3” x 2”
3” x 4”
4” x 2”
4” x 3”
4” x 4”
4” x 6”
CTN QTY
8
4
8
4
4
2
• Slotted
• Stainless bolts and washers
PART NO.
C40425
CTN QTY
8
“Code Blue” No Caulk Closet Flange
• Four stainless bolts and washers
• Neoprene gasket meets ASTM C564
• Ideal for both repair and new construction
• Easy to install- reduces installation time by 80%
• Push over cast iron or plastic pipe, anchor to floor and
tighten bolts
PART NO.
C40320
C40420*
C40430*
C40440*
Inside Caulk Closet Flange
DESCRIPTION
4” x 2” No Caulk
DESCRIPTION
3” pipe x 2” depth
CTN QTY
8
8
4
4
• Notched and slotted
• Inside caulk connection
Service Weight
PART NO.
C41410
C41411
C41420
C41421
C41430
C41440
C41460
DESCRIPTION
4” x 1”
4” x 1-1/2”
4” x 2”
4” x 2-1/2”
4” x 3”
4” x 4”
4” x 6”
CTN QTY
10
10
8
8
6
4
2
Extra Heavy - 5” I.D. - NO BEAD
C42421
C42440
C42460
4” x 2-1/2”
4” x 4”
4” x 6”
8
4
2
“Code Blue” No Caulk
Closet Flange w/Test Cap
• Cut out neoprene test cap
• Stainless steel bolts
PART NO.
C40500
C40503
DESCRIPTION
4” x 2”
3” x 3”
CTN QTY
8
8
No Hub Closet Flange
Inside Caulk Reducing Closet Flange
PART NO.
C45433
250
DESCRIPTION
4” inlet x 3” outlet x 3” depth
CTN QTY
6
PART NO.
C46331*
C46431
C46351*
C46451
DESCRIPTION
3” x 3-1/2”
4” x 3-1/2”
3” x 5-1/2”
4” x 5-1/2”
CTN QTY
6
6
6
6
Toll Free Phone 1-800-35-JONES (355-6637) • Toll Free Fax 1-800-462-6991 • Website www.plumbest.com
Closet Flanges & Accessories
2” Offset Closet Flange
Brass Four Way Offset Closet Flange
• Clip allows four way 1-1/2” offset
• For use with lead bends
PART NO.
C43440
C43441
DESCRIPTION
4” x 4” x 2”
4” x 4” x 2”
CONNECTION
Inside Caulk
No Hub
CTN QTY
4
4
PART NO.
C49421
DESCRIPTION
4” x 2”
CTN/MSTR
1/40
Closet Flange Repair Ring
“ Code Blue” 1” Offset Closet Flange
• Securely attaches to concrete or wood sub-floor
• Replaces most closet rings
• Corrosion Resistant• Mounting ears offset by 1/8” to allow
closet bolts to be installed
• 5/16” bolt slots
PART NO.
C85000
PART NO.
C40640
DESCRIPTION
4”
CONNECTION
No Caulk
CTN QTY
4
DESCRIPTION
Closet flange repair ring
• Used to repair broken
closet flanges
• Individually carded for easy
display or bulk
• 1-1/2” offset
• Internal clip allows 360° offset capability
DESCRIPTION
4 “x 2”
4” x 4”
CONNECTION
Inside Caulk
Inside Caulk
PART NO.
C87100
CTN QTY
8
4
CTN/MSTR
24/240
• Supports flange if floor has rotted or if rough-in hole is
too large
• Easy to install- complete kit includes screws
• Cast iron fits 3” or 4” flange; plastic fits 3”,4”or 3”x 4”
flange
• Individually carded
PART NO.
C01001
C01002
DESCRIPTION
14 oz.
Deep seal 1-1/8”
16 oz.
DESCRIPTION
Repair flange carded
Flange Support For Wood Floors
Brass Closet Flange
PART NO.
C49440
C49441
C49442
F
Gapper Flange
Four Way Offset Closet Flange
PART NO.
C44420
C44440
CTN/MSTR
20/80
CTN/MSTR
1/50
1/40
1/50
DESCRIPTION
Flange support for plastic
Flange support for cast iron
CTN/MSTR
1/50
1/50
Moss Bay Repair Flange
• For corroded and rusted toilet flanges
• Installs in minutes
PART NO.
C85500
DESCRIPTION
Moss bay repair flange
CTN/MSTR
1/50
251
Drain Bodies
Shower Drain Bodies
w/Clamping Ring And Bolts
(Mechanical Joint) Drain Bodies
• Tongue and groove cast iron bolt down clamping ring
• Weep holes on both top and bottom for secondary
drainage
• Inside caulk unit can be used with gasket to make unit
no caulk
• For 2” IPS threaded tailpieces
PART NO.
D60900
D60901
D60902
F
SIZE
2” Inside Caulk
2” FIP
2” No Hub
PAN
6-1/2”
6-1/2”
6-1/2”
HEIGHT
2-1/2”
2-1/2”
2-1/2”
CTN QTY
1
1
1
Shower Drain Bodies w/Brass
Threaded Clamping Ring
SIZE
2” FIP
2” No Hub
2” Inside Caulk
PAN
6-3/8”
6-3/8”
6-3/8”
HEIGHT
3-1/4”
3-1/4”
3-1/4”
PART NO.
D65002
D66002
D65003
D66003
D66004
SIZE
2”
2”
3”
3”
4”
PAN
7”
9”
7”
9”
9”
SPUD
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
HEIGHT
2-1/2”
3-1/8”
2-1/2”
3-1/8”
3-1/8”
CTN QTY
1
1
1
1
1
“Code Blue”
No Hub Drain Bodies
• Designed for lead pan showers
• Weep holes in clamping ring
• For 2” IPS threaded tailpieces
PART NO.
D61800
D61801
D61802
• 1/2” Primer tapped with brass plug
• Supplied with stainless steel bolts
• Test plug included
• Tapped for 3-1/2 spud
• Tapped for 3-1/2” spud
CTN QTY
1
1
1
Heavy Duty Drain Bodies
PART NO.
D65102
D66102
D65103
D66103
D65104
D66104
SIZE
2”
2”
3”
3”
4”
4”
PAN
7”
9”
7”
9”
7”
9”
SPUD
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
HEIGHT
2-1/2”
3-1/8”
2-1/2”
3-1/4”
2-1/2”
3-1/8”
CTN QTY
1
1
1
1
1
1
• For use with heavy duty floor drains
• For 3-1/2” IPS threaded tailpieces
PART NO.
D80097
D80099
D80090
D80096
D80098
D80091
252
SIZE
3” No Hub
3” Inside Caulk
3” No Hub; 1/2 PT
4” No Hub
4” Inside Caulk
4” No Hub; 1/2 PT
PAN
10-1/2”
10-1/2”
10-1/2”
10-1/2”
10-1/2”
10-1/2”
HEIGHT
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
CTN QTY
1
1
1
1
1
1
“Code Blue”
IPS Drain Bodies
PART NO.
D65202
D66202
D65203
D66203
D66204
SIZE
2”
2”
3”
3”
4”
PAN
7”
9”
7”
9”
9”
SPUD
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
HEIGHT
2-1/2”
3-1/8”
2-1/2”
3-1/8”
3-1/8”
CTN QTY
1
1
1
1
1
Drain Bodies
(Mechanical Joint) Slab Drain Bodies
Gasket Connection Base
• Supplied with Multi- Tite gasket
• Use with CI strainers or covers for heavy trucking traffic
• Use with PB, NB, SS or CP strainers or covers for heavy
pedestrian traffic
• 1/2” Primer tap
• Less clamping ring
PART NO.
D67201
SIZE
2”
PAN
7”
SPUD
3-1/2”
HEIGHT
3-3/8”
CTN QTY
1
“Code Blue”
No Hub Slab Drain Bodies
PART NO.
D62300
D62349
D62350
D62400
SIZE
2”
3”
4”
PAN
7”
7”
7”
SPUD
3-1/2”
3-1/2”
3-1/2”
HEIGHT
5-1/4”
5-1/4”
5-1/2”
5-1/2”
CTN QTY
1
1
1
1
3-1/2” Spud Extension
• Less clamping ring
PART NO.
D67200
D67300
D67400
S.V. BASE x SPUD
3”x 3” IPS
3”x 3-1/2”IPS
4”x 3-1/2” IPS
4”x 4” IPS
HEIGHT
3-3/8”
3-3/8”
3-3/8”
F
• 2-1/2”-4” extension for a 3-1/2 drain/ cleanout spud
• Use on cast iron or PVC drain bodies when additional
height is needed to offset inconsistent concrete pours
CTN QTY
1
1
1
PART NO.
D60979
DESCRIPTION
3-1/2” Spud Extension
CTN QTY
1
Cast Iron Spuds w/Strainers
For Heavy Duty Drain Bodies
“Code Blue”
Push-On Drain Bodies
• For PVC connections, you must replace with extra heavy
Dual Tite gaskets
PART NO.
D66200
D66300
D66400
SIZE
2”
3”
4”
PAN
9”
9”
9”
SPUD
3-1/2”
3-1/2”
3-1/2”
HEIGHT
3-3/4”
3-3/4”
3-3/4”
CTN QTY
1
1
1
2-1/2” IPS threaded throat for testing w/round strainer
PART NO.
D62130
D62131
D62132
SPUD
3” IPS
3” IPS
3” IPS
STRAINER
4-9/16” CI
5” NB with ring
5” PB with ring
CTN QTY
1
1
1
3” IPS threaded throat for testing with round strainer
No Hub Base
• Use with PB, NB, SS or CP strainers or covers for heavy
pedestrian traffic
NOTE: 3” No hub will receive a 2” multi-tite gasket and therefore
becomes a 2” push-on body. 4” No hub will receive a 3” multi-tite
gasket.
PART NO.
D63300
D63349
D63350
D63400
NO HUB BASE x SPUD
3”x 3” IPS
3”x 3-1/2” IPS
4”X 3-1/2” IPS
4”x 4” IPS
HEIGHT
4-1/4”
4-1/4”
4-1/4”
4-1/4”
CTN QTY
1
1
1
1
PART NO.
D62135
D62136
D62137
SPUD
3-1/2” IPS
3-1/2” IPS
3-1/2” IPS
STRAINER
5-1/2” CI
6” NB with ring
6” PB with ring
CTN QTY
1
1
1
3-1/2” IPS threaded throat for testing w/round strainer
PART NO.
D62140
D62141
D62142
SPUD
4” IPS
4” IPS
4” IPS
STRAINER
5-1/2” CI
6” NB with ring
6” PB with ring
CTN QTY
1
1
1
253
Spuds & Strainers
Plastic Spuds w/Square Strainers
& Tops for Heavy Duty Drain Bodies
Metal Spuds w/Strainers For
Drain Bodies
• For use with floor drains
• 5” round cover with 7” square top
PART NO.
D56500
D56501
D56502
D56503
D56504
D56505
F
SPUD
3” IPS
3” IPS
3-1/2” IPS
3-1/2” IPS
4” IPS
4” IPS
STRAINER
PB
NB
PB
NB
PB
NB
CTN QTY
1
1
1
1
1
1
STRAINER
4” NB
4” PB
CTN/MSTR
1/40
1/40
3-1/2” IPS Metal Spud
PART NO.
D60986
D60987
SPUD
3-1/2”
3-1/2”
Replacement Strainer
D60966
D60967
Replacement Strainer for D60-986
Replacement Strainer for D60-987
50
100
Metal Spuds w/Strainers For
Drain Bodies
• For use with floor drains
IPS Spud w/Round Strainer
PART NO.
D60980
D60981
D60982
D60970
D60975
D60955
D60956
D60986
D60987
D60990
D60991
D60996
D60997
D60992
D60993
D60994
D60995
D60998
D60989
D60999
D60958
D60959
254
SIZE
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
STRAINER
5” CP
5” PB
5” NB
6” PB
6” NB
SCREWS CTN/MSTR
4 (3-7/8”)
1/20
4 (3-7/8”)
1/20
4 (3-7/8”)
1/20
4 ( 4-7/8”)
1/12
4 ( 4-7/8”)
1/12
STRAINER
4” SS stamped
4” Chrome cast
4” PB cast
6” CP
6” PB
5” NB
5” PB
4” NB
4” PB
5” CP
5” PB
5” NB
6” NB
6” CP
6” PB
8” CP
8” PB
8” NB
9” PB
9” NB
5” NB
5” PB
SCREWS CTN/MSTR
2 (3-3/8”)
1/50
2 (3-3/8”)
1/50
2 (3-3/8”)
1/50
2 (5”)
1/30
2 (5”)
1/30
3 (3-7/8”)
1/30
3 (3-7/8”)
1/30
2 (3-1/4”)
1/40
2 (3-1/4”)
1/40
3 (3-7/8”)
1/40
3 (3-7/8”)
1/40
3 (3-7/8”)
1/40
3 (4-3/4”)
1/20
2 (5”)
1/20
2 (5”)
1/20
4 (6-3/4”)
1/10
4 (6-3/4”)
1/10
4 (6-3/4”)
1/10
4 (7-5/8”)
1/12
4 (7-5/8”)
1/12
3 (3-7/8”)
1/30
3 (3-7/8”)
1/30
Funnels
• Vandal- proof installation
• Fits virtually any floor/ shower drain
• Funnel tapped for 10-24 screws which are supplied with
washers
IPS Spud w/Square Strainer
PART NO.
D60954
D60960
D60962
D60961
D60963
SIZE
2”
2”
2”
2”
2”
3”
3”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
4”
4”
PART NO.
F65400
F65600
DESCRIPTION
4” Funnel
6” Funnel
CTN/MSTR
1
1/18
Assembled Cast Iron Drains
“ Code Blue” Roman Tub Drains
“Code Blue” EZ Test Shower Drains
• 6” and 7” pans
• Non- adjustable
• Polished chrome, polished brass and satin nickel finishes
with PVD protective finish
• Includes cover plate and
stainless steel screws
NIPPLE NOT
INCLUDED
A
A
B
PIPE
SIZE
PIPE SIZE
A
1-1/2”
3-1/2”
2”
3-1/2”
B
PIPE
SIZE
C
NO HUB
B
4-1/4”
4-1/4”
C
6”
7”
C
IPS
PART NO.
D64150
D64202
D64012*
D64302*
SIZE
1-1/2” IPS
2” IPS
2” IPS
2” No hub
BASE
6”
6”
7”
6”
STRAINER CTN/MSTR
SS
1/4
SS
1/4
SS
1/4
SS
1/4
PART NO.
D64800
D64801
D64802
D64803
D64804
D64805
D64806
D64807
D64808
D64809
D64810
D64811
SIZE
2” IPS
2” No Caulk
2” IPS
2” No Caulk
2” IPS
2” No Caulk
2” IPS
2” No Caulk
2” IPS
2” No Caulk
2” IPS
2” No Caulk
B
PIPE
SIZE
C
NO HUB
PART NO.
D64502
D64002*
D64402
D64402G
D64022*
A
B
PIPE SIZE
C
NO CAULK
SIZE
2” No Caulk
2” No Caulk
2” Inside
Caulk
D64-402 +
Gasket
2” No Hub
PIPE SIZE
C
INSIDE
CAULK
BASE
6”
7”
CTN QTY
1
1
1
1
1
1
1
1
1
1
1
1
F
• Roman tub drains
• Fits non-adjustable “Code Blue” drains
• Includes cover plate and stainless
steel screws
• No caulk includes built-in test plug
A
FINISH
CP
CP
CP
CP
PB
PB
PB
PB
SN
SN
SN
SN
“Code Blue” Replacement Strainers
“Code Blue” Shower Drains
A
BASE
7”
7”
6”
6”
7”
7”
6”
6”
7”
7”
6”
6”
PIPE
A
B
C
B SIZE
2” 3-1/2” 4-1/4” 6”
2” 3-1/2” 4-1/4” 7”
STRAINER CTN/MSTR
SS
1/4
SS
1/4
6”
SS
1/4
6”
SS
1/4
7”
SS
1/4
PART NO.
D40000
D40001
D40002
DESCRIPTION
Chrome plated
PB/PVD
Satin Nickel/PVD
CTN/MSTR
1/50
1/50
1/50
• Regular Strainers
• Fits non-adjustable “Code Blue” drains
• Will not fit D64010 or D64011
PART NO.
D64000
D64401
D64001
D6400BN
D6400RB
D6400WB
DESCRIPTION
2” SS
SS Crown
2” PB/PVD
Brushed Nickel
Oil Rubbed Bronze
Old World Bronze
CTN/MSTR
1
1
1/100
1/250
1/250
1/250
“Code Blue” Non-Adjustable Drain
• With ABS base and cast iron top
PART NO.
D64010
D64011 (with test cap)
TOP
Cast Iron
Cast Iron
BASE
ABS Base
ABS Base
CTN/MSTR
1/4
1/4
255
2” Shower and Floor Drains
• Tongue and groove cast iron bolt down clamping ring
• Weep holes on both top and bottom for secondary drainage
• Inside caulk unit can be used with gasket to make unit no-caulk
2” IPS Brass Spud with 4” Round Strainer
PART NO.
D60100
D60102
D60103
D60101
SIZE
2” Inside Caulk
2” FIP
2” No Hub
2” Gasket for inside caulk unit
PAN STRAINER CTN QTY
6-1/2”
SS
8
6-1/2”
SS
8
6-1/2”
SS
8
1
2” IPS Brass Spud with 4” Cast Brass Round Strainer
F
PART NO.
D60201
D60202
D60203
D60204
D60205
D60206
SIZE
2” Inside Caulk
2” Inside Caulk
2” FIP
2” FIP
2” No Hub
2” No Hub
6-1/2”
CP
8
6-1/2”
PB
8
6-1/2”
CP
8
6-1/2”
PB
8
6-1/2”
CP
8
6-1/2”
PB
8
2” IPS Brass Spud with 6” Cast Round Strainer
PART NO.
D60211
D60212
D60207
D60208
D60209
D60210
SIZE
2” Inside Caulk
2” Inside Caulk
2” FIP
2” FIP
2” No Hub
2” No Hub
6-1/2”
CP
1
6-1/2”
PB
1
6-1/2”
CP
1
6-1/2”
PB
1
6-1/2”
CP
1
6-1/2”
PB
1
2” Shower Drains
With Brass Threaded Clamping Ring
• Designed for lead pan showers
• Weep holes in clamping ring
2” IPS Brass Spud With 4” Round Strainer
PART NO.
D61101
D61102
D61103
SIZE
2” IPS
2” No Hub
2” Inside Caulk
6-1/2”
SS
4
6-1/2”
SS
4
6-1/2”
SS
4
2” IPS Brass Spud With 4” Cast Brass Round Strainer
PART NO.
D61201
D61202
D61203
SIZE
2” IPS
2” No Hub
2” Inside Caulk
6-1/2”
CP
4
6-1/2”
CP
4
6-1/2”
CP
4
2” IPS Brass Spud With 6” Cast Brass Round Strainer
PART NO.
D61301
D61302
D61303
D61850
SIZE
2” IPS
2” No Hub
2” Inside Caulk
Brass screw-down clamping
ring
6-1/2”
PB
4
6-1/2”
PB
4
6-1/2”
PB
4
1
2” IPS Brass Spud with 4” Cast Square Strainer
PART NO.
D60400
D60410
D60402
D60412
D60403
D60413
D60499
D60498
256
SIZE
2” Inside Caulk
2” Inside Caulk
2” FIP
2” FIP
2” No Hub
2” No Hub
2” Inside Caulk Push On
2” Inside Caulk Push On
6-1/2”
CP
1
6-1/2”
PB
1
6-1/2”
CP
1
6-1/2”
PB
1
6-1/2”
CP
1
6-1/2”
PB
1
6-1/2”
CP
1
6-1/2”
PB
1
2” “Code Blue” No Caulk
(Mechanical Joint) Floor Drains
2” “Code Blue”
No Hub Floor Drain
3 1/2” IPS Spuds With 4”,5”, or 6” Round Strainer
PART NO.
D65661
D65662
D66681
D66682
D65500
D65501
D65502
D66500
D66501
D66502
D65503
D65504
D65505
D66503
D66504
D66505
SIZE
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
PAN STRAINER
7”
4” NB
7”
4” PB
9”
4” NB
9”
4” PB
7”
5” NB
7”
5” PB
7”
5” CP
9”
5” NB
9”
5” PB
9”
5” CP
7”
6” NB
7”
6” PB
7”
6” CP
9”
6” NB
9”
6” PB
9”
6” CP
HEIGHT
4”- 4 13/16”
4” - 4 13/16”
4” - 4 13/16”
4” - 4 13/16”
4”- 5”
4”- 5”
4”- 5”
4”- 5”
4”- 5”
4”- 5”
4 1/4”- 5 1/4”
4 1/4”- 5 1/4”
4 1/4”- 5 1/4”
4 1/4”- 5 1/4”
4 1/4”- 5 1/4”
4 1/4”- 5 1/4”
CTN QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3 1/2” IPS Spuds with 4”,5” or 6” Round Strainer
HEIGHT
4 1/4”- 5 1/4”
4 1/4”- 5 1/4”
4 1/4”-5 1/4”
4 1/4”-5 1/4”
4 1/4”- 5 1/4”
4 1/4”- 5 1/4”
4 1/4”- 5 1/4”
4 1/4”- 5 1/4”
CTN QTY
1
1
1
1
1
1
1
1
3 1/2” IPS Spuds with 5” or 6” Square Strainer
PART NO.
D65509
D65511
D66509
D66511
D65510
D65512
D66510
D66512
SIZE
2”
2”
2”
2”
2”
2”
2”
2”
PAN STRAINER
7”
5” NB
7”
5” PB
9”
5” NB
9”
5” PB
7”
6” NB
7”
6” PB
9”
6” NB
9”
6” PB
PART NO.
D66675
D66676
D65655
D65656
D65560
D65561
D65562
D66560
D66561
D66562
D65563
D65564
D65565
D66563
D66564
D66565
PART NO.
D65569
D65571
D66569
D66571
D65570
D65572
D66570
D66572
SIZE
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
SIZE
2”
2”
2”
2”
2”
2”
2”
2”
PAN STRAINER
9”
4” NB
9”
4” PB
7”
4” NB
7”
4” PB
7”
5” NB
7”
5” PB
7”
5” CP
9”
5” NB
9”
5” PB
9”
5” CP
7”
6” NB
7”
6” PB
7”
6” CP
9”
6” NB
9”
6” PB
9”
6” CP
PAN STRAINER
7”
5” NB
7”
5” PB
9”
5” NB
9”
5” PB
7”
6” NB
7”
6” PB
9”
6” NB
9”
6” PB
HEIGHT
3 3/4”- 4 5/8”
3 3/4”- 4 5/8”
3 3/4”- 4 7/16”
3 3/4”- 4 7/16”
2 7/8”- 4 1/2”
2 7/8”- 4 1/2”
2 7/8”- 4 1/2”
3 1/2”- 5 1/8”
3 1/2”- 5 1/8”
3 1/2”- 5 1/8”
4”- 5 1/4”
4”- 5 1/4”
4”- 5 1/4”
3 5/8”- 5 5/8”
3 5/8”- 5 5/8”
3 5/8”- 5 5/8”
CTN QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
HEIGHT
3 1/4”- 5 1/4”
3 1/4”- 5 1/4”
3 7/8”- 5 7/8”
3 7/8”- 5 7/8”
4”- 5 1/4”
4”- 5 1/4”
4 1/8”- 6 3/8”
4 1/8”- 6 3/8”
CTN QTY
1
1
1
1
1
1
1
1
F
2” “Code Blue” (Mechanical Joint)
No Caulk Slab Drain
• No Clamping Ring
3 1/2” Spud With 4”,5” or 6” Round Strainer
PART NO.
D67001
D67002
D67003
D67004
D67005
D67006
D67007
D67008
SIZE
2”
2”
2”
2”
2”
2”
2”
2”
PAN STRAINER
7”
4” NB
7”
4” PB
7”
5” NB
7”
5” PB
7”
5” CP
7”
6” NB
7”
6” PB
7”
6” CP
HEIGHT
3 3/4”- 4 3/4”
3 3/4”- 4 3/4”
3 3/4”- 4 7/8”
4”- 5 3/8”
3 1/2”- 4 7/8”
3 3/4”- 5 1/8”
3 3/4”- 5 1/8”
4”- 5 1/2”
CTN QTY
1
1
1
1
1
1
1
1
257
No Hub Slab Drain
Push-On Floor Drain
• With Clamping Ring
• Supplied with V96-002 gasket for 2” cast iron pipe
3 1/2” Spud with 4”,5” or 6” Round Strainer
F
PART NO.
D67016
D67017
D67018
D67019
D67020
D67021
D67022
D67023
SIZE
2”
2”
2”
2”
2”
2”
2”
2”
PAN STRAINER
7”
4” NB
7”
4” PB
7”
5” NB
7”
5” PB
7”
5” CP
7”
6” NB
7”
6” PB
7”
6” CP
HEIGHT
3 5/8”- 4 3/4”
3 5/8”- 4 3/4”
3 1/2”- 4 7/8”
4”- 5 3/8”
3 1/2”- 4 7/8”
3 7/8”- 5”
3 3/4”- 5”
4”- 5 3/8”
CTN QTY
1
1
1
1
1
1
1
1
HEIGHT
3 3/4”- 5 1/8”
3 3/4”- 5 1/8”
4”- 5 3/16”
4”- 5 3/16”
CTN QTY
1
1
1
1
3 1/2” Spud with 5” or 6” Square Strainer
PART NO.
D67027
D67028
D67029
D67030
SIZE
2”
2”
2”
2”
PAN STRAINER
7”
5” NB
7”
5” PB
7”
6” NB
7”
6” PB
3 1/2” Stud with 4”,5” or 6” Round Strainer
PART NO.
D66700
D66701
D66702
D66703
D66704
D66705
D66706
D66707
SIZE
2”
2”
2”
2”
2”
2”
2”
2”
PAN STRAINER
9”
4” NB
9”
4” PB
9”
5” NB
9”
5” PB
9”
5” CP
9”
6” NB
9”
6” PB
9”
6” CP
HEIGHT
4 5/8”- 5 1/2”
4 5/8”- 5 1/2”
4 5/8”- 5 1/2”
5 3/16”- 6 1/8”
4 3/4”- 5 1/2”
4 7/8”- 5 3/4”
4 7/8”- 5 3/4”
5 1/4”- 6 1/4”
CTN QTY
1
1
1
1
1
1
1
1
Bronze Shower Drains
• Heavy bronze body
• Suitable for residential and commercial installation
• 4-1/2” strainers in stainless steel or PVD polished brass
• Solid bronze strainer spuds in standard (1-1/2”) or extra long (2-1/2”) length
• 3 types of 2” connections
IPS Floor Drain
2” IPS Drain
PART NO.
D68510
D68511
D68512
D68513
258
SIZE
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
PAN STRAINER
HEIGHT
9”
4” NB
3 1/4”- 4”
9”
4” PB
3 1/4”- 4”
7”
4” NB
3 3/16”- 4 3/16”
7”
5” NB
2 7/8”- 4 1/2”
7”
5” PB
2 7/8”- 4 1/2”
7”
5” CP
2 7/8”- 4 1/2”
9”
5” NB
3 1/2”- 5 1/8”
9”
5” PB
3 1/2”- 5 1/8”
9”
5” CP
3 1/2”- 5 1/8”
7”
6” NB
3 1/2”- 4 1/2”
7”
6” PB
3 1/2”- 4 1/2”
7”
6” CP
3 1/2”- 4 1/2”
9”
6” NB
3 5/8”- 5 5/8”
9”
6” PB
3 5/8”- 5 5/8”
9”
6” CP
3 5/8”- 5 5/8”
STRAINER
SS
PB
SS
PB
CTN QTY
1
1
1
1
SPUD
Standard
Standard
Long Pattern
Long Pattern
STRAINER
SS
PB
SS
PB
CTN QTY
1
1
1
1
SPUD
Standard
Standard
Long Pattern
Long Pattern
STRAINER
SS
PB
SS
PB
CTN QTY
1
1
1
1
2” Caulk Drain
3 1/2” IPS Spuds with 4”, 5” or 6” Round Strainer
PART NO.
D66687
D66688
D65665
D65620
D65621
D65622
D66620
D66621
D66622
D65623
D65624
D65625
D66623
D66624
D66625
SPUD
Standard
Standard
Long Pattern
Long Pattern
CTN QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
PART NO.
D68610
D68611
D68612
D68613
2” Sweat Drain
PART NO.
D68710
D68711
D68712
D68713
Replacement Strainers
PART NO.
D68507
D68508
DESCRIPTION
4 1/2” SS strainer with screws
4 1/2” PVD PB strainer with screws
CTN/MSTR
100/400
100/400
3” Heavy Duty No Hub
Floor/ Shower Drain
(Mechanical Joint) Floor Drain
• Cast metal strainer and tailpiece
• Cast iron body
3 1/2” IPS Spuds with 5” or 6” Round Strainer
PART NO.
D80200
D80201
D80212
D80202
D80203
D80213
SIZE
3”
3”
3”
3”
3”
3”
PAN STRAINER
10”
5” CP
10”
5” PB
10”
5” NB
10”
6” CP
10”
6” PB
10”
6” NB
HEIGHT
4 1/2”- 6 1/2”
4 1/2”- 6 1/2”
4 1/2”- 6 1/2”
4 1/2”- 6 1/2”
4 1/2”- 6 1/2”
4 1/2”- 6 1/2”
CTN QTY
1
1
1
1
1
1
HEIGHT
4 1/2”- 6 1/2”
4 1/2”- 6 1/2”
4 1/2”- 6 1/2”
4 1/2”- 6 1/2”
CTN QTY
1
1
1
1
PART NO.
D80214
D80216
D80215
D80217
SIZE
3”
3”
3”
3”
PAN STRAINER
10”
5” PB
10”
5” NB
10”
6” PB
10”
6” NB
3” Heavy Duty Inside Caulk
Floor/ Shower Drain
PART NO.
D66683
D66684
D65663
D65664
D65520
D65521
D65522
D66520
D66521
D66522
D65523
D65524
D65525
D66523
D66524
D66525
SIZE
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
PAN STRAINER
9”
4” NB
9”
4” PB
7”
4” NB
7”
4” PB
7”
5” NB
7”
5” PB
7”
5” CP
9”
5” NB
9”
5” PB
9”
5” CP
7”
6” NB
7”
6” PB
7”
6” CP
9”
6” NB
9”
6” PB
9”
6” CP
HEIGHT
4”- 4 3/4”
4”- 4 3/4”
4”- 4 13/16”
4”- 4 13/16”
2 7/8”- 4 1/2”
2 7/8”- 4 1/2”
2 7/8”- 4 1/2”
3-1/2” – 5-1/8”
3-1/2” – 5-1/8”
3-1/2” – 5-1/8”
3”- 5”
3”- 5”
3”- 5”
3-5/8” – 5-5/8”
3-5/8” – 5-5/8”
3-5/8” – 5-5/8”
CTN QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
PAN STRAINER
HEIGHT
7”
4” NB
3 1/2”- 4 3/4”
7”
4” PB
3 1/2”- 4 3/4”
7”
5” NB
3 1/2”- 4 13/16”
7”
5” PB
4”- 5 5/16”
7”
5” CP
3 1/2”- 4 13/16”
7”
6” NB
3 3/4”- 5”
7”
6” PB
3 3/4”- 5”
7”
6” CP
4”- 5 3/8”
7”
8” NB
4 1/8”- 5 5/8”
7”
8” PB
4 1/8”- 5 5/8”
7”
8” CP
4 1/4”- 5 5/8”
7”
9” NB
4 1/4”- 5 5/8”
7”
9” PB
4 1/4”- 5 5/8”
CTN QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
F
No Hub Slab Drain
• Cast iron body
3 1/2” IPS Spud with 5”,6” or 8” Round Strainer
PART NO.
D80100
D80101
D80112
D80102
D80103
D80113
SIZE
3”
3”
3”
3”
3”
3”
PAN STRAINER
10”
5” CP
10”
5” PB
10’
5” NB
10”
6” CP
10”
6” PB
10”
6” NB
HEIGHT
4 1/2”- 6 1/2”
4 1/2”- 6 1/2”
4 1/2”- 6 1/2”
4 3/4”- 6 3/4”
4 3/4”- 6 3/4”
4 3/4”- 6 3/4”
CTN QTY
1
1
1
1
1
1
3 1/2” Spud with 4”,5”,6”, 8” or 9” Round Strainer
PART NO.
D67031
D67032
D67033
D67034
D67035
D67036
D67037
D67038
D67039
D67040
D67041
D67042
D67043
SIZE
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3 1/2” Spud With 5” or 6” Square Strainer
PART NO.
D67044
D67045
D67046
D67047
SIZE
3”
3”
3”
3”
PAN STRAINER
7”
5” NB
7”
5” PB
7”
6” NB
7”
6” PB
HEIGHT
3 3/4”- 5 1/16”
3 7/8”- 5 1/16”
4”- 5 1/4”
4”- 5 1/4”
CTN QTY
1
1
1
1
259
No Hub Floor Drain
F
Push-On Floor Drain
• With Clamping Ring
• Supplied with V96- 003 gasket for 3” cast iron pipe
3 1/2” IPS Spuds With 4”,5” or 6” Round Strainer
3 1/2” Spuds with 4”,5” or 6” Round Strainer
PART NO.
D65657
D65658
D66677
D66678
D65580
D65581
D65582
D66580
D66581
D66582
D65583
D65584
D65585
D66583
D66584
D66585
SIZE
3”
3’
3”
3’
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
PAN STRAINER
7”
4” NB
7”
4” PB
9”
4” NB
9”
4” PB
7”
5” NB
7”
5” PB
7”
5” CP
9”
5” NB
9”
5” PB
9”
5” CP
7”
6” NB
7”
6” PB
7”
6” CP
9”
6” NB
9”
6” PB
9”
6” CP
HEIGHT
3 3/4”- 4 7/16”
3 3/4”- 4 7/16”
3 3/4”- 4 5/8”
3 3/4”- 4 5/8”
2 7/8”- 4 1/2”
2 7/8”- 4 1/2”
2 7/8”- 4 1/2”
3 1/2”- 5 1/8”
3 1/2”- 5 1/8”
3 1/2”- 5 1/8”
3”- 5”
3”- 5”
3”- 5”
3 5/8”- 5 5/8”
3 5/8”- 5 5/8”
3 5/8”- 5 5/8”
CTN QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
PART NO.
D66715
D66716
D66717
D66718
D66719
D66720
D66721
D66722
SIZE
3”
3”
3”
3”
3”
3”
3”
3”
PAN STRAINER
9”
4” NB
9”
4” PB
9”
5” NB
9”
5” PB
9”
5” CP
9”
6” NB
9”
6” PB
9”
6” CP
HEIGHT
4 3/4”- 5 5/8”
4 3/4”- 5 5/8”
4 3/4”- 5 5/8”
5 3/8”- 6 1/4”
4 3/4”- 5 5/8”
5”- 6”
5”- 6”
5 3/8”- 6 3/8”
CTN QTY
1
1
1
1
1
1
1
1
IPS Floor Drain
PART NO.
D66689
D66690
D65667
D65668
D65640
D65641
D65642
D66640
D66641
D66642
D65643
D65644
D65645
D66643
D66644
D66645
260
SIZE
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
PAN STRAINER
HEIGHT
CTN QTY
9”
4” NB
3 1/4”x 4”
1
9”
4” PB
3 1/4” x 4”
1
7”
4” NB
3 3/16”- 4 13/16”
1
7”
4” PB
3 3/16”- 4 13/16”
1
7”
5” NB
2 7/8”- 4 1/2”
1
7”
5” PB
2 7/8”- 4 1/2”
1
7”
5” CP
2 7/8”- 4 1/2”
1
9”
5” NB
3 1/2”- 5 1/8”
1
9”
5” PB
3 1/2”- 5 1/8”
1
9”
5” CP
3 1/2”- 5 1/8”
1
7”
6” NB
3”- 5”
1
7”
6” PB
3”- 5”
1
7”
6” CP
3”- 5”
1
9”
6” NB
3 5/8”- 5 5/8”
1
9”
6” PB
3 5/8”- 5 5/8”
1
9”
6” CP
3 5/8”- 5 5/8”
1
4” Heavy Duty No Hub
Floor/ Shower Drain
( Mechanical Joint) Floor Drain
• Cast iron body
PART NO.
D80206
D80207
D80218
D80208
D80209
D80219
D80210
D80211
SIZE
4”
4”
4”
4”
4”
4”
4”
4”
PAN STRAINER
10”
5” CP
10”
5” PB
10”
5” NB
10”
6” CP
10”
6” PB
10”
6” NB
10”
8” CP
10”
8” PB
HEIGHT
4 1/2”- 6 1/2”
4 1/2”- 6 1/2”
4 1/2”- 6 1/2”
4 3/4”- 6 3/4”
4 3/4”- 6 3/4”
4 3/4”- 6 3/4”
5”- 7”
5”- 7”
CTN QTY
1
1
1
1
1
1
1
1
PART NO.
D66685
D66686
D66540
D66541
D66542
D66543
D66544
D66545
SIZE
4”
4”
4”
4”
4”
4”
4”
4”
PAN STRAINER
9”
4” NB
9”
4” PB
9”
5” NB
9”
5” PB
9”
5” CP
9”
6” NB
9”
6” PB
9”
6” CP
HEIGHT
4 1/2”- 6 1/2”
4 1/2”- 6 1/2”
4 3/4”- 6 3/4”
4 3/4”- 6 3/4”
CTN QTY
1
1
1
1
IPS Floor Drain
HEIGHT
4”- 4 7/8”
4”- 4 7/8”
3 1/2”- 5 1/8”
3 1/2”- 5 1/8”
3 1/2”- 5 1/8”
3 5/8”- 5 5/8”
3 5/8”- 5 5/8”
3 5/8”- 5 5/8”
CTN QTY
1
1
1
1
1
1
1
1
HEIGHT
3 1/4” - 4”
3 1/4” - 4”
3 1/2”- 5 1/8”
3 1/2”- 5 1/8”
3 1/2”- 5 1/8”
3 5/8”- 5 5/8”
3 5/8”- 5 5/8”
3 5/8”- 5 5/8”
CTN QTY
1
1
1
1
1
1
1
1
F
PART NO.
D80220
D80222
D80221
D80223
SIZE
4”
4”
4”
4”
PAN STRAINER
10”
5” PB
10”
5” NB
10”
6” PB
10”
6” NB
4” Heavy Duty Inside Caulk
Floor/ Shower Drain
• Cast metal strainer or tailpiece
• Cast iron body
3 1/2” IPS Spuds with 5”,6”, or 8” Round Strainer
PART NO.
D80106
D80107
D80118
D80108
D80109
D80119
SIZE
4”
4”
4”
4”
4”
4”
PAN STRAINER
10”
5” CP
10”
5” PB
10”
5” NB
10”
6” CP
10”
6” PB
10”
6” NB
HEIGHT
4 1/2”- 6 1/2”
4 1/2”- 6 1/2”
4 1/2”- 6 1/2”
4 3/4”- 6 3/4”
4 3/4”- 6 3/4”
4 3/4”- 6 3/4”
CTN QTY
1
1
1
1
1
1
PART NO.
D66691
D66692
D66660
D66661
D66662
D66663
D66664
D66665
SIZE
4”
4”
4”
4”
4”
4”
4”
4”
PAN STRAINER
9”
4” NB
9”
4” PB
9”
5” NB
9”
5” PB
9”
5” CP
9”
6” NB
9”
6” PB
9”
6” CP
261
No Hub Floor Drain
F
Push-On Floor Drain
• With clamping ring
• Supplied with V96-004 gasket for 4” cast iron pipe
PART NO.
D66679
D66680
D65659
D65660
D65600
D65601
D65602
D66600
D66601
D66602
D65603
D65604
D65605
D66603
D66604
D66605
SIZE
4”
4”
4”
4”
4”
4”
4”
4”
4”
4”
4”
4”
4”
4”
4”
4”
PAN STRAINER
9”
4” NB
9”
4” PB
7”
4” NB
7”
4” PB
7”
5” NB
7”
5” PB
7”
5” CP
9”
5” NB
9”
5” PB
9”
5” CP
7”
6” NB
7”
6” PB
7”
6” CP
9”
6” NB
9”
6” PB
9”
6” CP
HEIGHT
3 3/8”- 4 5/8”
3 3/8”- 4 5/8”
3 3/4”- 4 7/16”
3 3/4”- 4 7/16”
3 1/2”- 4 3/4”
3 1/2”- 4 3/4”
3 1/2”- 4 3/4”
3 1/2”-4 3/4”
3 1/2”-4 3/4”
3 1/2”-4 3/4”
3 3/4”- 5”
3 3/4”- 5”
3 3/4”- 5”
3 3/4”- 5”
3 3/4”- 5”
3 3/4”- 5”
CTN QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
HEIGHT
3 5/8”- 4 7/8”
3 5/8”- 4 7/8”
3 5/8”- 4 7/8”
4”- 5 3/8”
3 1/2”- 4 7/8”
3 7/8”- 5 1/16”
3 3/4”- 5 1/16”
4”- 5 1/2”
CTN QTY
1
1
1
1
1
1
1
1
PART NO.
D66732
D66733
D66734
D66735
D66736
D66737
D66738
D66739
SIZE
4”
4”
4”
4”
4”
4”
4”
4”
PAN STRAINER
9”
4” NB
9”
4” PB
9”
5” NB
9”
5” PB
9”
5” CP
9”
6” NB
9”
6” PB
9”
6” CP
HEIGHT
4 3/4”- 5 1/2”
4 3/4”- 5 1/2”
4 3/4”- 5 5/8”
5 1/4”- 6 3/16”
4 3/4”- 5 5/8”
5”- 6 1/8”
5”- 6 1/8”
5 3/8”- 6 3/8”
CTN QTY
1
1
1
1
1
1
1
1
No Hub Slab Drain
PART NO.
D67048
D67049
D67050
D67051
D67052
D67053
D67054
D67055
262
SIZE
4”
4”
4”
4”
4”
4”
4”
4”
PAN STRAINER
7”
4” NB
7”
4” PB
7”
5” NB
7”
5” PB
7”
5” CP
7”
6” NB
7”
6” PB
7”
6” CP
Cleanout Bodies & Spuds
No Hub Cleanout Bodies
Gasket Connection Base
• Use with CI strainers or covers for heavy
trucking traffic
• Use with PB,NB or CP strainers or covers for
heavy pedestrian traffic
• Supplied with multi-tite gasket
PART NO.
C37102
C37103
C37104
PIPE SIZE
2” Body
3” Body
4” Body
TAP SIZE
1-1/2”
2-1/2”
3-1/2”
HEIGHT
2-1/8”
2-1/8”
2-1/8”
CTN QTY
10
10
10
PART NO.
D62300
D62349
D62350
D62400
PIPE SIZE
3”
3”
4”
4”
TAP SIZE
3” IPS
3-1/2” IPS
3-1/2” IPS
4” IPS
HEIGHT
5”
5-1/4”
5-1/4”
5-1/4”
CTN QTY
1
1
1
1
Plain End Cast Iron Cleanout
Short Pattern Less Plug
Cast Iron Spuds w/Covers For
Heavy Duty Cleanouts
• Fits flush with hub
PART NO.
C37302
C37303
C37304
C37314
PIPE SIZE
2”
3”
4”
4”
TAP SIZE
1-1/2”
2-1/2”
3”
3-1/2”
HEIGHT
2-3/4”
3-1/2”
3”
3”
CTN QTY
12
12
8
8
• For use with heavy duty cleanouts
2-1/2” IPS Brass Plug with Round Cover
PART NO.
D62230
D62231
D62232
Plain End Cast Iron Cleanout
Long Pattern Less Plug
F
SIZE
3”
3”
3”
COVER
5” CI
5” NB with ring
5” PB with ring
CTN QTY
1
1
1
COVER
5” CI
6” NB with ring
6” PB with ring
CTN QTY
1
1
1
COVER
5” CI
6” NB with ring
6” PB with ring
CTN QTY
1
1
1
3” IPS Brass Plug with Round Cover
• Meets ASTM A-74
PART NO.
C37002
C37003
C37004
C37014
C37005
C37006
PIPE SIZE
2”
3”
4”
4”
5”
6”
TAP SIZE
1-1/2”
2-1/2”
3”
3-1/2”
4”
5”
HEIGHT
2-3/4”
4”
4”
4”
3-1/2”
4”
CTN QTY
12
12
8
8
4
2
PART NO.
D62235
D62236
D62237
SIZE
3-1/2”
3-1/2”
3-1/2”
PART NO.
D62240
D62241
D62242
SIZE
4”
4”
4”
No Hub Base
• Use with PB, NB, SS or CP strainers or covers
for heavy pedestrian traffic
PART NO.
D63300
D63349
D63350
D63400
PIPE SIZE
3”
3”
4”
4”
TAP SIZE
3” IPS
3-1/2 IPS
3-1/2 IPS
4” IPS
HEIGHT
4-1/4”
4-1/4”
4-1/4”
4-1/4”
CTN QTY
1
1
1
1
263
Cleanout Bodies & Spuds
Plastic Spuds w/Covers & Tops
for Heavy Duty Cleanouts
Metal Spuds w/Covers for
Heavy Duty Cleanouts
• Round cover with 7” top
2-1/2” IPS Brass Plug with Square Top
PART NO.
D59912
D59913
SIZE
3”
3”
COVER
7” PB
7” NB
CTN QTY
1
1
COVER
7” PB
7” NB
CTN QTY
1
1
PART NO.
SIZE
COVER
7” PB
7” NB
CTN QTY
1
1
C37810
C37811
C37805
C37806
3-1/2”
3-1/2”
4”
4”
3” IPS Brass Plug with Square Top
PART NO.
D59910
D59911
F
SIZE
3-1/2”
3-1/2”
3-1/2” IPS Brass Plug with Square Top
PART NO.
D59918
D59919
SIZE
4”
4”
PART NO.
C37803
C37801
C37800
SIZE
3”
3”
3”
COVER SCREWS
5” NB
5” PB
5” CP
3
3
3
COVER SCREWS
5” NB
5” PB
5” NB
5” PB
3
3
3
3
CENTER X
CTN/MSTR
CENTER
3-7/8”
1/20
3-7/8”
1/20
3-7/8”
1/20
CENTER X
CTN/MSTR
CENTER
3-7/8”
1/18
3-7/8”
1/18
3-7/8”
1/20
3-7/8”
1/20
4” IPS Brass Countersunk Plug with Round Cover
Plastic Spuds w/Round Covers
for Heavy Duty Cleanouts
PART NO.
C37807
C37808
SIZE
4”
4”
COVER SCREWS
6” NB
6” PB
2
2
CENTER X
CTN/MSTR
CENTER
4-7/8”
1/8
4-7/8”
1/8
2-1/2” IPS Plastic Plug with Round Cover
PART NO.
D59904
D59908
D59905
D59909
D59940
SIZE
3”
3”
3”
3”
3”
COVER
6” PB
6” PB with ring
6” NB
6” NB with ring
6” CI with ring
CTN QTY
1
1
1
1
1
COVER
5” PB
5” PB with ring
5” NB
5” NB with ring
6” PB
6” PB with ring
6” NB
6” NB with ring
6” CI with ring
6” PB
6” PB with ring
6” NB
6” NB with ring
6” CI with ring
CTN QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3” IPS Plastic Plug with Round Cover
PART NO.
D59943
D59944
D59945
D59946
D59901
D59906
D59902
D59907
D59941
D59914
D59915
D59916
D59917
D59942
264
SIZE
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
3-1/2”
4”
4”
4”
4”
4”
Cleanout Plugs
New Orleans Code Brass Plugs
PART NO.
P55150
P55250
P55300
P55350
P55500
PLUG
1-1/2”
2-1/2”
3”
3-1/2”
5”
O.D.
1-13/16”
2-3/4”
3-3/8”
4”
5-1/2”
Southern Code Brass Plug
CTN QTY
100
100
60
80
30
Lead Fit-All Plug
• Cast iron cored
• Sizes are true measurement, not iron pipe size
PART NO.
P56200
P56250
P56300
P56350
P56400
P56450
P56500
P56550
P56600
PLUG
2”
2-1/2”
3”
3-1/2”
4”
4-1/2”
5”
5-1/2”
6”
CTN/MSTR
24/48
24/48
12/24
12/24
12/24
12
12
12
12
PART NO.
P50100
P50125
P50150
P51150
P50200
P51200
P50250
P51250
P50300
P51300
P50350
P51350
P50400
P51400
P50500
P51500
P50600
P51600
P50800
P51800
P50999
PLUG
1” Raised head
1- 1/4” Raised head
1-1/2” Raised head
1-1/2” Countersunk
2” Raised head
2” Countersunk
3” Raised head
3” Countersunk
4” Raised head
4” Countersunk
5” Raised head
5” Countersunk
6” Raised head
6” Countersunk
8” Raised head
8” Countersunk
10” Raised head
O.D.
1-9/32”
1-5/8”
1-7/8”
1-7/8”
2-3/8”
2-3/8”
2-7/8”
2-7/8”
3-3/8”
3-3/8”
3-7/8”
3-7/8”
4-1/2”
4-1/2”
5-1/2”
5-1/2”
6-1/2”
6-1/2”
8-1/2”
8-1/2”
10-5/8”
CTN QTY
200
250
200
200
200
200
200
200
120
120
120
120
90
90
50
50
30
30
15
15
10
O.D.
1-3/4”
1-3/4”
2-3/8”
2-3/8”
2-3/4”
2-3/4”
3-1/2”
3-1/2”
3-7/8”
3-7/8”
4-3/8”
4-3/8”
5-1/2”
5-1/2”
CTN QTY
150
200
100
200
100
100
60
120
40
80
40
60
30
40
F
Heavy Pattern Brass Plug
PART NO.
P52150
P53150
P52200
P53200
P52250
P53250
P52300
P53300
P52350
P53350
P52400
P53400
P52500
P53500
PLUG
2” Raised head
2” Countersunk
3” Raised head
3” Countersunk
4” Raised head
4” Countersunk
5” Raised head
5” Countersunk
265
Cleanout Plugs
Code Pattern Plugs
Extension Cover Set
• Meets ASTM A74-98
PART NO.
P59300
P59333
P59350
P59355
P59400
P59444
PLUG
3” Raised head
3” Countersunk
4” Raised head
4” Countersunk
CTN QTY
50
50
50
50
50
50
Slotted Brass Plug With 1/4” Tap
F
• Tap is not through the plug
PART NO.
P58150
P58200
P58250
P58300
P58350
P58400
PLUG
1-1/2”
2”
2-1/2”
3”
3-1/2”
4”
CTN QTY
150
100
80
60
40
30
Brass Plug For Extension Cover
•Countersunk plug tapped 1/4-20
PART NO.
P54150
P54200
P54250
P54300
P54350
P54400
P54500
P54600
P54800
266
PLUG
1-1/2”
2”
2-1/2”
3”
3-1/2”
4”
5”
6”
8”
O.D.
1-7/8”
2-3/8”
2-7/8”
3-3/8”
3-7/8”
4-1/2”
5-1/2”
6-1/2”
8-1/2”
CTN QTY
200
200
100
100
100
80
40
30
20
• Set includes stainless steel extension cover,
brass countersunk plug and 1/4- 20 x 4” flat
head machine screws
* Contains slotted plug
Wall Covers (24 gauge)
PART NO.
C92150
C92151*
C92200
C92202*
C92250
C92252*
C92300
C92301
C92303*
C92350
C92351
C92353*
C92400
C92404*
C92500
C92600
C92601
C92800
PLUG
1-1/2”
1-1/2” slotted
2”
2” slotted
2-1/2”
2-1/2” slotted
3”
3”
3” slotted
3-1/2”
3-1/2”
3-1/2” slotted
4”
4” slotted
5”
6”
6”
8”
COVER
3”
3”
4”
4”
5”
5”
5”
6”
6”
6”
7”
7”
7”
7”
8”
8”
10”
10”
CTN QTY
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
5
5
5
PLUG
1-1/2”
2”
2-1/2”
3”
3”
3-1/2”
3-1/2”
4”
5”
COVER
3”
4”
5”
5”
6”
6”
7”
7”
8”
CTN QTY
10
10
10
10
10
10
10
10
10
Floor Covers (16 gauge)
PART NO.
C93150
C93200
C93250
C93300
C93301
C93350
C93351
C93400
C93500
Cleanout Cover Plates
Stainless Steel Cleanout/
Extension Covers
High Impact Plastic
Cleanout Cover Plates
Wall Mount (24 gauge)
PART NO.
C90300
C90400
C90500
C90600
C90700
C90800
C90999
SIZE
3”
4”
5”
6”
7”
8”
10”
CTN/MSTR
50/500
25/200
25/200
25/100
25/100
25/100
25/50
SIZE
3”
4”
5”
6”
7”
8”
10”
CTN/MSTR
25/200
25/200
25/200
25/100
25/100
25/50
25/50
SIZE
3”
4”
5”
6”
7”
8”
10”
CTN QTY
25
25
25
25
10
10
10
SIZE
3”
4”
5”
6”
7”
8”
10”
CTN QTY
25
25
25
25
10
10
10
Floor Mount (16 gauge)
PART NO.
C91300
C91400
C91500
C91600
C91700
C91800
C91999
Wall Mount With 4” Bolt (24 gauge)
PART NO.
C90013
C90014
C90015
C90016
C90017
C90018
C90019
• Polished chrome or white matte finish
• Individually bagged with # 14 wood screw included
Flat Design
PART NO.
C94004
C94005
C94007
C94009
C95004
C95005
C95007
C95009
SIZE
4-1/4” Chrome finish
4-1/4” White finish
CTN/MSTR
25/200
25/200
25/200
50/200
25/200
25/200
25/200
25/100
SIZE
CTN/MSTR
25/200
25/200
25/200
25/100
25/200
25/200
25/200
25/100
F
Bell Design
PART NO.
C96004
C96005
C96007
C96009
C97004
C97005
C97007
C97009
Trap Covers
Floor Mount With 4” Bolt ( 16 gauge)
PART NO.
C91013
C91014
C91015
C91016
C91017
C91018
C91019
Bolts For Extension/Cleanout Covers
• Stainless steel
PART NO.
C98001
C98002
SIZE
1/4”- 20 x 2-1/2”
1/4”- 20 x 4”
1/4”- 20 x 6”
CTN/MSTR
100/1000
100/1500
100/1200
CTN/MSTR
150/300
50/200
Stainless Steel Dome Cover Plates
• High grade stainless steel
• Individually bagged with # 14 wood screw and
1/4” x 2-1/2” machine screw
• Flat slotted head plated machine screw
PART NO.
C90002
C90004
C90006
DESCRIPTION
5-3/4” Flat SS trap cover
5-3/4” Raised SS trap cover
PART NO.
C98014
C98016
C98018
DESCRIPTION
4” SS dome cover plate
CTN/MSTR
60/240
50/150
25/100
267
Assembled Cleanouts
Push-On Cleanout
• Meets ASTM A74-98 and ASME A112.36.2M-91
• Cut pipe to desired level, lube gasket and push-on pipe,
tap with lead hammer to seat, then install plug
• Schedule 40 unit fits plastic and extra heavy cast iron
pipe
Plain End Cast Iron CleanoutShort Pattern with Southern Code Plug
• Fits flush with hub
Less Gasket
PART NO.
C36003
C36013
C36004
C36014
C36024
C36034
C36006
C36016
PIPE SIZE
3” SV
3” SV
4” SV
4” SV
4” Sch.40
4” Sch.40
6” SV
6” SV
PLUG
Raised head
Countersunk
Raised head
Countersunk
Raised head
Countersunk
Raised head
Countersunk
HEIGHT
3”
3”
3”
3”
3”
3”
2-3/4”
2-3/4”
CTN QTY
8
8
8
8
8
8
4
4
PIPE SIZE
4” SV
4” SV
4” Sch.40
4” Sch.40
6” SV
6” SV
PLUG
Raised head
Countersunk
Raised head
Countersunk
Raised head
Countersunk
HEIGHT
3-1/4”
3-1/4”
3-1/4”
3-1/4”
3”
3”
CTN QTY
8
8
8
8
4
4
PART NO.
C38102
C39102
C38103
C39103
C38104
C39104
C38114
C39114
PIPE SIZE
2”
2”
3”
3”
4”
4”
4”
4”
PLUG
3” Raised head
3” Countersunk
HEIGHT
2-7/8”
2-7/8”
3-5/8”
3-5/8”
3”
3”
3”
3”
CTN QTY
10
10
10
10
10
10
10
10
With Gasket
F
PART NO.
C36104
C36114
C36124
C36134
C36106
C36116
Southern Code Plug
PIPE SIZE
2”
2”
3”
3”
4”
4”
PLUG
1-1/2” Raised Head
HEIGHT
2-1/8”
2-1/8”
2-1/8”
2-1/8”
2-1/8”
2-1/8”
CTN QTY
10
10
10
10
10
10
PIPE SIZE
2”
2”
3”
3”
4”
4”
PLUG
HEIGHT
2-1/8”
2-1/8”
2-1/8”
2-1/8”
2-1/8”
2-1/8”
CTN QTY
10
10
10
10
10
10
PLUG
1-1/2” Plug
2-1/2” Plug
3-1/2” Plug
HEIGHT
2-1/4”
2-1/4”
2-1/4”
CTN QTY
10
10
10
Heavy Plug
PART NO.
C38502
C39502
C38503
C39503
C38504
C39504
New Orleans Code Plug
PART NO.
C40102
C40103
C40104
268
PIPE SIZE
2”
3”
4”
• For use with service weight (caulk into hub) or no-hub
( use coupling)
With Southern Code Plug
No Hub Cleanout With Plug
PART NO.
C38402
C39402
C38403
C39403
C38404
C39404
Plain End Cleanout Long Pattern
PART NO.
C38002
C39002
C38003
C39003
C38004
C39004
C38014
C39014
C38005
C39005
C38006
C39006
PIPE SIZE
2”
2”
3”
3”
4”
4”
4”
4”
5”
5”
6”
6”
PLUG
1-1/2” Raised (low sq.)
2-1/2” Raised ( low sq.)
3” Raised head (low sq.)
3” Countersunk
3-1/2” Raised (low sq.)
4” Countersunk
5” Countersunk
HEIGHT CTN QTY
3-1/4”
12
3-1/4”
12
4”
12
4”
12
4”
8
4”
8
4”
8
4”
8
3-1/2”
4
3-1/2”
4
4”
2
4”
2
PLUG
1-1/2” Raised head (hex)
3” Raised head (hex)
3” Countersunk
4” Countersunk
5” Countersunk
HEIGHT
3-1/4”
3-1/4”
4”
4”
4”
4”
4”
4”
3-1/2”
3-1/2”
4”
4”
With Heavy Pattern Plug
PART NO. PIPE SIZE
2”
C38202
2”
C39202
3”
C38203
3”
C39203
4”
C38204
4”
C39204
4”
C38214
4”
C39214
5”
C38205
5”
C39205
6”
C38206
6”
C39206
CTN QTY
12
12
12
12
8
8
8
8
4
4
2
2
Assembled Cleanouts
Cleanout Ferrule
With New Orleans Code Plug
No Hub
Adjustable Cleanout
Service Weight
3” Spud
PART NO.
C40002
C40003
C40004
C40006
PIPE SIZE
2” SV
3” SV
4” SV
6” SV
PLUG
1-1/2”
2-1/2”
3 1/2”
5”
HEIGHT
3”
4”
4”
4”
CTN QTY
12
12
8
2
PART NO.
D63330
D63333
D63334
D63335
PIPE
SIZE
3”
3”
3”
3”
COVER
5”CI
5”NB
5”PB
5”CP
BODY
HEIGHT
4 1/4”
4 1/4”
4 1/4”
4 1/4”
ADJ.
HEIGHT
4 7/8”- 6”
4 7/8”- 6”
4 7/8”- 6”
4 7/8”-6”
BODY
HEIGHT
4 1/4”
4 1/4”
ADJ.
HEIGHT
4 7/8”- 6”
4 7/8”- 6”
CTN QTY
1
1
1
1
4” Spud
Plumb Lock
Adjustable Cleanout
PART NO.
D63433
D63434
PIPE
SIZE
4”
4”
COVER
5”NB
5”PB
CTN QTY
1
1
F
Adjustable- Plain End
• Cast iron top is for forklift or heavy trucking traffic
• Nickel bronze and polished brass tops are for heavy
pedestrian traffic
• Satin finish on nickel bronze and polished brass ring and
cover
• Cleanout body with brass plug
• Can also be caulked into hub
• Supplied with Muli-Tite gasket
• Similar to Zurn Neo-Loc line
3” Spud with 3” Gasket Connection
PART NO.
D62330
D62333
D62334
D62335
PIPE
SIZE
3”
3”
3”
3”
COVER
5” CI
5” NB
5” PB
5” CP
BODY
HEIGHT
5-1/4”
5-1/4”
5-1/4”
5-1/4”
ADJ.
HEIGHT
5-7/8” – 7”
5-7/8” – 7”
5-7/8” – 7”
5-7/8” – 7”
CTN QTY
1
1
1
1
PART NO.
D62433
D62434
D62443
D62444
PIPE
BODY
ADJ.
COVER
CTN QTY
SIZE
HEIGHT
HEIGHT
4”
5” NB
5-1/2” 6-1/8” – 7-1/4”
1
4”
5” PB
5-1/2” 6-1/8” – 7-1/4”
1
4” 5” NB w/4” plug 5-1/2” 6-1/8” – 7-1/4”
1
4” 5” PB w/4” plug 5-1/2” 6-1/8” – 7-1/4”
1
PART NO.
C33021
C33022
C33023
C33031
C33032
C33033
C33044
C33045
C33046
PIPE
SIZE
2”
2”
2”
3”
3”
3”
4”
4”
4”
ADJ.
CTN QTY
HEIGHT
5 1/4” CI w/ center screw 3 1/8”- 4 1/4”
1
5 1/2” NB with ring
3”- 4 3/4”
1
5 1/2” PB with ring
3”- 4 3/4”
1
5 1/4”CI w/ center screw
4”- 5 3/4”
1
4 1/4”- 6”
1
4 1/4”- 6”
1
6 3/16” CI w/ center screw 5 1/8”- 6 1/8”
1
5 3/8”- 6 3/8”
1
5 3/8”- 6 3.8”
1
COVER
PART NO.
D62601
D62602
PIPE
SIZE
6”
6”
COVER
5” NB
5” PB
BODY
ADJ.
CTN QTY
HEIGHT
HEIGHT
3-1/4” 3-5/8” – 4-3/4”
1
3-1/4” 3-5/8” – 4-3/4”
1
Adjustable Push-On Cast Iron Pipe
• Supplied with gasket for cast iron pipe
pedestrian traffic
• Cleanout body with brass plug
PART NO.
C33121
C33122
C33123
C33144
C33145
C33146
PIPE
SIZE
3”
3”
3”
4”
4”
4”
ADJ.
CTN QTY
HEIGHT
5 1/4” CI w/ center screw 3 7/8”- 4 3/4”
1
4 1/8”- 5”
1
4 1/8”- 5”
1
6 3/16” CI w/ center screw 4 7/8”- 5 3/4”
1
5”- 6”
1
5”- 6”
1
COVER
269
Assembled Cleanouts
Adjustable Plastic Pipe Fit
Adjustable Access Cover
pedestrian traffic
cover
• Cleanout body with plastic plug
PART NO.
C33221
C33222
C33223
C33231
C33232
C33233
C33244
C33245
C33246
F
PART NO.
C33221
C33321
C33222
C33322
C33223
C33323
C33231
C33331
C33232
C33332
C33233
C33333
C33244
C33344
C33245
C33345
C33246
C33346
HEIGHT ADJUSTMENT
2-7/8” – 3-7/8”
3-1/8” – 4-1/8”
3-1/8” – 4-1/8”
4” – 5”
4-1/4” – 5-1/4”
4-1/4” – 5-1/4”
5-1/8” – 6-1/4”
5-3/8” – 6-1/2”
5-3/8” – 6-1/2”
SIZE
2”
2”
2”
2”
2”
2”
3”
3”
3”
3”
3”
3”
4”
4”
4”
4”
4”
4”
PART NO.
C33321
C33322
C33323
C33331
C33332
C33333
C33344
C33345
C33346
COVER
5-1/4” CI w/ center screw
5-1/2” NB with ring
5-1/2” PB with ring
6-1/2”PB with ring
6-1/2”PB with ring
HEIGHT ADJUSTMENT
2-7/8” – 3-7/8”
3-1/8” – 4-1/8”
3-1/8” – 4-1/8”
4” – 5”
4-1/4” – 5-1/4”
4-1/4” – 5-1/4”
5-1/8” – 6-1/4”
5-3/8” – 6-1/2”
5-3/8” – 6-1/2”
MATERIAL CTN QTY
PVC
1
ABS
1
PVC
1
ABS
1
PVC
1
ABS
1
PVC
1
ABS
1
PVC
1
ABS
1
PVC
1
ABS
1
PVC
1
ABS
1
PVC
1
ABS
1
PVC
1
ABS
1
• Designed to fit over 2”, 3” and 4” plastic adapter, cast iron
cleanout, ferrules and various drainage piping (2” x 3” fits
2” and 3” bodies
• 3 set screws allow for vertical adjustment
• Nickel bronze and polished brass are satin finish
PART NO.
PIPE
SIZE
C33001
2” & 3”
C33002
C33003
2” & 3”
2” & 3”
C33004
4”
C33005
C33006
4”
4”
pedestrian traffic
cover
• Cleanout body with plastic plug
PART NO.
C33444
C33445
C33446
PART NO.
C33444
C33544
C33445
C33545
C33446
C33546
270
HEIGHT ADJUSTMENT
3” – 4-1/2”
3-1/4” – 4-3/4”
3-1/4” – 4-3/4”
SIZE
4”
4”
4”
4”
4”
4”
PART NO.
C33544
C33545
C33546
COVER
HEIGHT ADJUSTMENT
3” – 4-1/2”
3-1/4” – 4-3/4”
3-1/4” – 4-3/4”
MATERIAL CTN QTY
PVC
1
ABS
1
PVC
1
ABS
1
PVC
1
ABS
1
5-1/4” CI w/ center
screw
6-3/16” CI w/ center
screw
HEIGHT
INSIDE
CTN QTY
C.O.
2-1/8”
4-9/16”
1
2-1/8”
2-1/8”
4-9/16”
4-9/16”
1
1
2-5/8”
5-5/16”
1
2-5/8”
2-5/8”
5-5/16”
5-5/16”
1
1
Heavy Duty Adjustable Access Cover
• Scoriated cover
• Fits any 6” pipe
• Cast iron top is for forklift or heavy trucking traffic for up
to 2000 lbs.
• 3 bolts secure the cleanout while puring concrete
PART NO. PIPE SIZE
6”
C33088
DESCRIPTION
HDuty CI cleanout
HEIGHT
3”
CTN QTY
1
Heavy Duty Cleanout
• Scoriated cover
• Fits any 6” pipe
• 3 bolts secure the cleanout while puring concrete
PART NO.
Adjustable Plastic Pipe Hub Fit
COVER
D76005
PIPE
SIZE
6”
DESCRIPTION
HEIGHT
HDuty CI cleanout
5-3/8”
INSIDE
CTN QTY
C.O.
6-3/4”
1
Adjustable Floor Cleanout
• Adjusts 2-1/2”
• 4” cast iron body
PART NO.
A40001
A40002
A40003
PIPE
SIZE
4”
4”
4”
DESCRIPTION
HEIGHT
5” CP
5” PB
5” NB
5-1/4”
5-1/4”
5-1/4”
INSIDE
CTN QTY
C.O.
3-3/4”
1
3-3/4”
1
3-3/4”
1
Roof Drains
Roof Drain with Cast Iron Dome
“Code Blue” No Hub Roof Drain
with Square Pan
• 10” diameter pan
• Dome has 50 sq. Inches of drain area
• Cast iron dome
PART NO.
R19003
R19005
R19004
R19006
R18020
SIZE
3” Inside
caulk
3” No Hub
4” Inside
caulk
4” No Hub
Cast iron
roof dome
• 8 1/2” square pan
• Cast Iron dome and drain
PAN
DOME
HEIGHT
CTN QTY
10”
5-1/2”
8”
1
10”
5-1/2”
8”
1
10”
5-1/2”
8”
1
10”
5-1/2”
8”
1
5-1/2”
PART NO.
R19202
R19203
R19204
R19206
SIZE
2” No Hub
3” No Hub
4” No Hub
6” No Hub
CTN QTY
1
1
1
1
“Code Blue” No Hub Dual Roof Drains
F
PAN
PAN
• 8 1/2” square pan
• Cast Iron dome and drain
HEIGHT
SIZE
2” No Caulk
3” No Caulk
4” No Caulk
HEIGHT
9-1/2”
9-3/4”
9-3/4”
9-3/4”
1
“Code Blue” No Caulk (Mechanical
Joint) Roof Drain with Square Pan
PART NO.
R19102
R19103
R19104
PAN
8-1/2”
8-1/2”
8-1/2”
8-1/2”
STRAINER
8-1/2”
8-1/2”
8-1/2”
HEIGHT
9-1/2”
9-1/2”
9-1/2”
CTN QTY
1
1
1
CENTER
LINE TO
CENTER
LINE
OVERALL HEIGHT
PIPE CENTER TO
PAN
SINGLE DOUBLE
SIZE
CENTER
2”
8-1/2”
19”
8”
8-1/2”
3”
8-1/2”
19”
9-1/2”
10”
4”
8-1/2”
19”
10”
10-1/2”
Single Dome
PART NO.
R19302
R19303
R19304
SIZE
2” No hub dual drain
PAN
19”
19”
19”
CTN QTY
1
1
1
SIZE
2” No hub dual dome drain
PAN
19”
19”
19”
CTN QTY
1
1
1
Double Dome
“Code Blue” No Hub Side Outlet
Roof Drain
PART NO.
R19307
R19305
R19306
Replacement Parts
PART NO.
R19402
R19403
R19404
SIZE
2”
3”
4”
PAN
8-1/2”
8-1/2”
8-1/2”
HEIGHT
9-1/2”
9-1/2”
9-1/2”
CTN QTY
1
1
1
PART NO.
R19099
R19100
SIZE
Roof drain dome
Clamping ring
CTN QTY
1
1
271
General Purpose Drains
Area Drain
St. Louis Drain
• Heavy duty loose set strainer
• Inside caulk
• Full waterway
• Lip secures strainer
DRAIN SPECS
TOP
SIZE
WIDTH
2”
4-7/8”
3”
6-3/16”
4”
7-3/16”
F
PART NO.
D76002
D77002
D76012
D76092
D76003
D77003
D76013
D76093
D76004
D77004
D76014
D76094
OVERALL
HEIGHT
3-1/4”
3-1/4”
3-1/4”
STRAINER SPECS
SIZE
A
B
2”
3”
4”
4-1/4”
5-3/8”
6-11/16”
4-1/4”
5-5/8”
6-11/16”
DESCRIPTION
2” Inside caulk drain
2” No hub drain
2” Inside caulk CP area drain with strainer
2” Strainer only
3” No hub drain
3” Strainer only
4” No hub drain
4” Strainer only
B
A
CTN QTY
8
8
8
1
4
4
4
1
4
4
4
1
Cast Iron Gasket Connection Drain
PART NO.
C72002
C72003
C72004
C72093
SIZE
3”
3”
3”
4”
4”
4”
STRAINER
5” NB with ring
5” PB with ring
4” CI
6” NB with ring
6” PB with ring
5” CI
CTN QTY
1
1
1
1
1
1
• Designed for prefab shower stalls
• Snap in stainless steel strainer
• Fits 2” Schedule 40 and cast iron pipe
• Can be adapted to no-caulk with gasket
• 4 1/4” OD strainer
PART NO.
D40102
D40202
D60101
272
STRAINER
SS
PB
CTN QTY
20
20
1
• Designed for prefab shower stalls
• Snap in stainless steel strainer
• 4 1/4” O.D. strainer
PART NO.
D40104
D40204
D40103
D40203
SIZE
1 1/2”
1 1/2”
2”
2”
STRAINER
SS
PB
SS
PB
CTN QTY
36
20
36
20
Female Iron Pipe Shower Drain
• Cast brass body
• Stainless steel strainer
PART NO.
D40150
D40200
• Inside caulk
DESCRIPTION
3” Strainer only
3” Drain with 2” hole in strainer
3” Strainer only with 2” hole
4” Strainer only
SIZE
2”
2”
Gaskets to make
unit no caulk
IPS Shower Stall Drain
Kentucky Drain
PART NO.
C73003
C73093
C73192
C73193
C73004
C73094
CTN QTY
8
4
2
1
Inside Caulk Shower Stall Drains
• Supplied with Multi-Tite gasket
• Just lube gasket and push over S.V. or N.H. cast iron pipe
• NB and PB are for heavy pedestrian traffic areas
PART NO.
D62950
D62951
D62952
D62960
D62961
D62962
SIZE
2” Inside caulk
3” Inside caulk
4” Inside caulk
6-1/4” OD Strainer
SIZE
1 1/2”
2”
BODY
Cast brass
Cast brass
STRAINER CTN QTY
SS
100
SS
100
CTN QTY
4
1
4
1
4
1
General Purpose Drains
Brass Inside Caulk Floor Drain
Floor Drain With Trap
• For use where pan liner is not required
• Brass body
PART NO.
D76601
SIZE
2”
BODY
Brass
• Throat of drain is threaded for backwater device D70-500
STRAINER CTN QTY
SS
50
Combination Drain Trap
Concealed Cleanout
PART NO.
D70001
D70011
D70098
DESCRIPTION
2” Drain
2” Drain with backwater device
6 3/8” Cast iron strainer
CTN QTY
1
1
1
Exposed Cleanout
D70020
D70022
D71103
D70021
• Bolt-down clamping collar
• Weep holes and grooves in clamping flange
PART NO.
J60060
J60061
J60062
SIZE
2” IPS
2” IPS
2” IPS
STRAINER
4” SS
4” CP brass
4” PB
CTN QTY
1
1
1
1
1
1
1
F
Backwater Device
• Sleeve type
• Ball included
Urinal Drain
PART NO.
D70500
B06001
B70499
• Brass body with stainless steel strainer
PART NO.
D45002
2” Drain with 1/2” PT
3” Drain - Backwater device not compatible
SIZE
2” IPS
BODY
Brass
STRAINER CTN QTY
SS
40
DESCRIPTION
2” MIP brass body
2” MIP plastic body
2” Plastic ball
CTN QTY
50
50
1300
Des Moines Pattern Floor Drain
Urinal Drain Flange Kit
• Bolt down lid
• Integral trap
• Kit includes all necessary hardware
PART NO.
F10005
DESCRIPTION
2” IPS x 4-1/4”
CTN QTY
50
PART NO.
D71003
D71004
DESCRIPTION
3” with trap
Strainer for Des Moines
CTN QTY
1
1
273
Bell Traps
Inside Caulk Bell Trap
Spigot Outlet Bell Trap
• Hinged lid
• Bell attached
PIPE SIZE
BODY
STRAINER
2”
3”
4”
6” x 6”
9” x 9”
12” x 12”
4-7/8”
6-3/4”
9-3/4”
PART NO.
D76202
D76203
D76204
• Loose lid
• Bell cast on
OUTLET
HEIGHT
1-3/4”
1-7/8”
1-3/4”
SIZE
6” x 6” x 2”
9” x 9” x 3”
12” x 12” x 4”
OVERALL
HEIGHT
4-1/8”
4-7/8”
4-7/8”
CTN QTY
1
1
1
Strainers Less Hinge
F
PART NO.
D76205L
D76207L
D76209L
PIPE SIZE
BODY
STRAINER
2”
3”
4”
6” x 6”
9” x 9”
12” x 12”
4-7/8”
6-3/4”
9-3/4”
PART NO.
D76402
D76403
D76404
OUTLET
HEIGHT
1-3/8”
1-1/2”
1-1/2”
SIZE
6” x 6” x 2”
9” x 9” x 3”
12” x 12” x 4”
OVERALL
HEIGHT
3-1/2”
4-1/2”
4-7/8”
CTN QTY
1
1
1
Replacement Strainer With Cast-In Bell
SIZE
4-7/8” strainer for 6” x 6”
CTN QTY
20
20
10
PART NO.
D76412
D76413
D76414
SIZE
4-7/8” cast-in bell for 6” x 6”
CTN QTY
20
20
10
Cast Iron Bell With Nut And Bolt
PART NO.
D76256
D76259
D76252
SIZE
Bell for 6” x 6”
CTN QTY
20
20
10
Pittsburgh Bell Trap
• Deep body
• 4” inside caulk
No Hub Bell Trap
PIPE SIZE
4”
• Spigot outlet
• Hinged lid
• Bell attached
PART NO.
B60994
BODY
9” x 9”
STRAINER
6-3/4”
SIZE
9” x 9” x 4” Inside caulk less bell
OVERALL HEIGHT
4-1/2”
CTN QTY
1
Strainer Only (Loose Lid)
PIPE SIZE
BODY
STRAINER
2”
3”
4”
6” x 6”
9” x 9”
12” x 12”
4-7/8”
6-3/4”
9-3/4”
PART NO.
D76302
D76303
D76304
SIZE
6” x 6” x 2”
9” x 9” x 3”
12” x 12” x 4”
OUTLET
HEIGHT
1-1/4”
1-1/2”
1-1/2”
OVERALL
HEIGHT
3-1/4”
4-1/4”
4-7/8”
PART NO.
B60099
SIZE
6-3/4” ID strainer
CTN QTY
1
CTN QTY
1
1
1
Strainers Less Hinge
PART NO.
D76205L
D76207L
D76209L
SIZE
CTN QTY
20
20
10
Cast Iron Bell With Nut And Bolt
PART NO.
D76256
D76259
D76252
274
SIZE
CTN QTY
20
20
10
Floor & Cesspool Drains/Grates
Caulk Cesspool with Recessed Grate
Heavy Duty Floor Drain
• 8-1/2” heavy duty cast iron grate
• Cast iron sediment bucket
No Hub Less Sediment Bucket
PART NO.
D79703
D79704
SIZE
3”
4”
PAN
10-1/2”
10-1/2”
GRATE
9” CI
9” CI
HEIGHT
5 1/4”
5 1/4”
CTN QTY
1
1
PAN
10-1/2”
10-1/2”
GRATE
9” CI
9” CI
HEIGHT
5 1/4”
5 1/4”
CTN QTY
1
1
GRATE
9”CI
9”CI
HEIGHT
5 1/4”
5 1/4”
CTN QTY
1
1
GRATE
9”CI
9”CI
HEIGHT
5 1/4”
5 1/4”
CTN QTY
1
1
No Hub With Sediment Bucket
PART NO.
D79705
D79706
SIZE
3”
4”
PART NO.
D76504
D76519
SIZE
3”
4”
PAN
10-1/2”
10-1/2”
Inside Caulk With Sediment Bucket
PART NO.
D79803
D79804
SIZE
3”
4”
PAN
10-1/2”
10-1/2”
CTN QTY
1
1
Rainleader Cesspool
• For areas requiring downspout, rainleader and
cesspool drain
• Grate secured by screw
• 12-3/4” diameter pan fits over outlet
Inside Caulk Less Sediment Bucket
PART NO.
D79805
D79806
DESCRIPTION
12” x 12” x 4”
Grate only
PART NO.
J60030
DESCRIPTION
4” hub inlet x 4” spigot outlet
CTN QTY
1
F
Square Cesspool Grate
Sediment Bucket
PART NO.
D50095
DESCRIPTION
CI sediment bucket
CTN QTY
1
(Mechanical Joint) Cesspool Drain
• Includes test plug
PART NO.
D76702
D76703
D76704
SIZE
2”
3”
4”
STRAINER
6” CI
7” CI
8” CI
HEIGHT
4 1/16”
4 1/16”
4 1/16”
PART NO.
D59156
D59158
D59160
D59162
DESCRIPTION
6” x 6” square grate
CTN QTY
10
5
2
2
Round Slop Sink, Hydrant Cesspool
CTN QTY
1
1
1
“Code Blue” No Caulk (Mechanical
Joint) Cesspool Drain Grate
• 2” IPS outlet
• Removable Strainer
PART NO.
S55100
S55101
DESCRIPTION
2” IPS ink painted
2” IPS galvanized cast iron
CTN QTY
1
1
Square Hydrant Cesspool
• Grate included
• Spigot outlet
PART NO.
D76705
D76706
D76707
DESCRIPTION
Grate for D76-702
Grate for D76-703
Grate for D76-704
CTN QTY
1
1
1
PART NO.
S57034
S57035
DESCRIPTION
11” x 11” x 4”
Grate only
CTN QTY
1
1
275
Service Sinks & Accessories
Porcelain Coated Floor Sinks
Service Sink Faucets
• Integral stops
• Integrated vacuum breaker
• Complete with all mounting
hardware
• Meets ASSE 1001
• Front hook to hang bucket
• 12”x 12” white porcelain coated cast iron
• No hub and inside caulk
• Aluminum dome bottom strainer included
PART NO.
S55104
S55004
S55112
S55113
S55114
DESCRIPTION
4” Inside caulk 6” deep
4” Inside caulk 8” deep
2” No hub 6” deep
CTN QTY
1
1
1
1
1
Top Grates Only To Fit Floor Sinks
PART NO.
S55349
S55350
S55351
S55352
S55353
S55354
DESCRIPTION
CTN/MSTR
Service sink faucet with lever handles
1/8
Service sink faucet w/cross handles
1/6
Cross handle stem repair kit for S55-350
1/100
Lever handle stem repair kit for S55-349
1/100
Integral stop repair kit for S55-349
1/100
Vacuum breaker repair kit (S5-349 or
1/100
S55-350)
Trap Standard
F
PART NO.
S55010
S55075
S55050
DESCRIPTION
Full top grate
Three- quarter grate
Half grate
Aluminum Bottom Dome
For Cast Iron Sink
• Fits all sizes porcelain coated cast iron
sinks
BOTTOM OD
5-3/8”
PART NO.
S55115
S60002
S60003
S60004
DESCRIPTION
Aluminum bottom dome- Fit All
2” Aluminum bottom dome
• Cast iron body with white coating
• Chrome- plated brass strainer
• Fits American Standard ,Kohler, Eljer and Crane
cast iron service sinks
CTN QTY
1
1
1
HEIGHT
2-1/4”
CTN QTY
10
10
10
10
PART NO.
T00002
T00003
T00005
T00006
T00009
CTN QTY
1
1
1
1
1
Mop Service Basin
• One-piece molded construction; 24” x 24” x 10”
• Crushed stone with polyester resin
• Supplied with 3” gasketed connection and stainless steel strainer
Plumlock Porcelain Floor Sink
• 12”x 12” white porcelain coated cast iron
• Aluminum dome strainer included
• Push-On Connection; gasket supplied
DESCRIPTION
2” IPS
3” IPS
Base plated for trap standard
1-1/2” N.O. plug with gasket
Strainer and stud for trap standard
PART NO.
S55240
DESCRIPTION
Mop service basin
CTN QTY
1
Hose and Bracket for Service Sink
PART NO.
S55122
S55123
S55124
DESCRIPTION
2” Plumlock Floor Sink- 6” deep
CTN QTY
1
1
1
• Heavy duty 300# cloth-reinforced hose
• 5” x 3” stainless steel bracket with rubber grip
• 3/4” brass hose coupling at one end
PART NO.
M05001
Plumlock Gasket For Cast Iron
Or Schedule 40 Pipe Connectors
276
DESCRIPTION
2” PlumLock Gasket
CTN QTY
1
Mop Hanger for Service Sink
• 24” x 3” stainless steel hanger with three rubber
tool grips
• Anchors included
• Fits 12” x 12” white porcelain coated cast iron
Plumlock Sinks
PART NO.
S55192
S55193
S55194
DESCRIPTION
Hose with bracket
CTN QTY
1
1
1
PART NO.
M05003
DESCRIPTION
Mop hanger
CTN/MSTR
1/25
Bar Grates/Sewer Strainers & Boxes
Water Access Box
Bar Grate
• Lockable lid
PART NO.
J60026
• For hub openings in soil pipe
Less Legs
PART NO.
D59102
D59103
D59104
D59106
D59101
SIZE
2”
3”
4”
6”
4”
DIAMETER
2-3/4”
3-3/4”
4-7/8”
6-7/8”
4-7/8”
CTN QTY
10
10
10
10
10
SIZE
2”
3”
4”
DIAMETER
2-3/4”
3-3/4”
4-7/8”
CTN QTY
10
10
10
DESCRIPTION
6”x 6”x 2”
CTN QTY
6
Perforated Vent Box
With Legs
PART NO.
D59112
D59113
D59114
Perforated Sewer Strainer with Legs
PART NO.
J60027
DESCRIPTION
6”x 6”x 2”
SIZE
4”
6”
8”
10”
12”
DIAMETER
5-1/2”
7-3/8”
10-1/8”
12-1/4”
14-1/4”
F
Philadelphia Style Vent Box
• Strainer secured by overlapping lug and screw
• Integral cast baffles
• For hub openings in clay sewer pipe
PART NO.
D59124
D59126
D59128
D59130
D59132
CTN QTY
6
CTN QTY
10
5
5
2
2
PART NO.
J60004
J60094
DESCRIPTION
4” Inside caulk
Strainer Replacement
CTN QTY
1
1
Fresh Air Inlet/ Floor Drain
Sewer Box
• Sewer lid is marked “sewer”
• Water lid is marked “water”
• Plain lid is unmarked
PART NO.
S36006
S36007
S36008
S36090
S36091
S36011
S36009
S36010
S36095
S36096
DESCRIPTION
8” water lid and ring
8” sewer lid
8” sewer lid and ring
8” plain lid
8” plain lid and ring
10” water lid and ring
10” sewer lid only
10” sewer lid and ring
10” plain lid
10” plain lid and ring
PART NO.
J60007
J60008
CTN QTY
1
1
1
1
1
1
1
1
1
1
DESCRIPTION
3” Spigot
4” Spigot
CTN QTY
15
15
Vent Cap
• Cast iron cap for 3” or 4” pipe
PART NO.
J60005
DESCRIPTION
3”- 4” vent cap
CTN QTY
10
277
Vent Boxes/Caps/Backwater Valves
Lockable Vent Cap
Reading Style Cleanout
• Cast iron grate fits inside spigot end of pipe
• Secured with adjustable screw and clamp
PART NO.
J60010
DESCRIPTION
4” cast iron vent cap
• 4” Inside caulk
CTN QTY
10
Brass Deck Plug
PART NO.
J60012
DESCRIPTION
Reading Cleanout
CTN QTY
1
Plumbest Cast Iron Backwater Valves
• Inside caulk
• Polished brass ring
• Cast brass body
• Skid-resistant scoriated lid
F
PART NO.
D28003
D28004
SIZE
3”
4”
CTN QTY
12
12
Blind Plugs
• Reduces Backflow in drainage system
• All neoprene gaskets
• 300 series stainless bolts and washers
• Repairable in service
• Revolutionary design- that works!
Service Weight
PART NO.
B01013
B01014
B01016
SIZE
3”
4”
6”
LENGTH
10-3/4”
11-3/4”
12-3/4”
HUB
5-1/8”
6-1/2”
7-1/4”
CTN QTY
1
1
1
SIZE
2”
3’
4”
6”
LENGTH
10-3/4”
11-3/4”
12-3/4”
14-1/2”
HUB
––
––
––
––
CTN QTY
1
1
1
1
No Hub
No Hub
PART NO.
D59202
D59203
D59204
SIZE
2”
3”
4”
CTN QTY
10
10
8
SIZE
2”
3”
4”
CTN QTY
10
8
4
Service Weight
PART NO.
D59302
D59303
D59304
PART NO.
B01002
B01003
B01004
B01006
Replacement Flappers
PART NO.
B01017
B01018
B01019
B01020
DESCRIPTION
2” bolt-in flapper and ring
CTN QTY
1
1
1
1
Reading Style Vent
• 4” Inside caulk
PART NO.
J60011
278
DESCRIPTION
Reading Vent
CTN QTY
1
Test Tees/Closet Bends
Test Tee
Tapped Saddle Tees
• U-bolt included
• Available with or without plug
• Plug is Southern Code
Service Weight Tee
PART NO.
T55002
T55012
T55003
T55013
T55004
T55014
DESCRIPTION
2”x 2” less plug
2”x 2” with plug
LENGTH PLUG CTN QTY
10-3/8”
2”
1
10-3/8”
2”
1
12-1/2”
3”
1
12-1/2”
3”
1
13-7/8”
4”
1
13-7/8”
4”
1
DESCRIPTION
LENGTH PLUG CTN QTY
6-3/8”
2”
1
6-3/8”
2”
1
7-3/4”
3”
1
7-3/4”
3”
1
8-7/8”
4”
1
8-7/8”
4”
1
PART NO.
T21001
T21002
T21003
T21004
S26008
CTN QTY
1
1
1
1
1
Repair Plate
No Hub Tee
PART NO.
T56002
T56012
T56003
T56013
T56004
T56014
SIZE
3”x 1 1/2”
3”x 2”
4”x 1 1/2”
4”x 2”
6” x 7” (1/4” thick) closed cell foam gasket
• U-bolt included
PART NO.
T21062
T21063
T21064
DESCRIPTION
2” Plate with u-bolt
F
CTN QTY
1
1
1
Test Tee with Heavy Plug
Service Weight Tee With Heavy Plug
PART NO.
T55022
T55033
T55044
DESCRIPTION
2”x 2”
3”x 3”
4”x 4”
LENGTH PLUG CTN QTY
10-3/8”
2”
1
12-1/2”
3”
1
13-7/8”
4”
1
No Hub Tee With Heavy Plug
PART NO.
T56022
T56033
T56044
DESCRIPTION
2”x 2”
3”x 3”
4”x 4”
LENGTH PLUG CTN QTY
6-3/8”
2”
1
7-3/4”
3”
1
8-7/8”
4”
1
Cast Iron Single Vent Running Trap
PART NO.
T64540
DESCRIPTION
5”x 4” single vent running trap
CTN QTY
1
279
Gas Burners/Log Lighter Valves/Access.
“T” Burner Bar
Log Lighter Burner Bars
• 12-1/4” long by 1-3/8” high, tapped 1/2” IPS in
ends and bottom
• Supplied with two 1/2” plugs and close nipple
orifice
PART NO.
L75080
L75180
DESCRIPTION
Natural Gas
LPG
LENGTH
12-1/4”
12-1/4”
HEIGHT
1-3/8”
1-3/8”
CTN QTY
10
10
• Air mixing chamber
• Straight: 17” pipe plus 3” mixing chamber
• T-Pattern: Two 7” pipes plus 3” mixing chamber
PART NO.
L75091
L75092
L75095
L75096
DESCRIPTION
Straight for natural gas
Straight for LPG
Tee for natural gas
Tee for LPG
CTN QTY
10
10
10
10
Two Leg Burner
• Dimensions 14” long x 1-3/4” high x 2-1/4” wide
• Tapped 1/2” IPS on both ends and one leg
• Comes with two 1/2” IPS plugs and close
nipple orifice
• Ledge over burner holes prevents clogging
F
PART NO.
L75081
L75181
DESCRIPTION
Natural Gas
LPG
LENGTH
14”
14”
HEIGHT
1-3/4”
1-3/4”
CTN QTY
10
10
Log Lighter Valves
• CSA design certified
• Zinc Escutcheon
• 1/4” Key included
• Individually tested (pressure test in open and closed position after installation)
• BTU rating: angle 188,000, straight 120,000
• To extend escutcheon use 1/2” pipe coupling and 1/2” pipe nipple
Standard Valve (7 turns open/close)
Round Burner
• 1-3/4” high x 4 1/2” wide, tapped 1/2” IPS in
bottom and sides
• Supplied with close nipple orifice and 1/2” plug
PART NO.
L75086
L75186
DESCRIPTION
Natural Gas
LPG
WIDTH
4-1/2”
4-1/2”
HEIGHT
1-3/4”
1-3/4”
CTN QTY
10
10
Rectangular Burner
• Dimensions 8-3/4” long x 1-1/2” high x 1-3/4”
wide with 1/2” IPS inlet
• Supplied with close nipple orifice
and removable lid
• Low Profile
PART NO.
L75085
L75185
280
DESCRIPTION
Natural Gas
LPG
LENGTH
8-3/4”
8-3/4”
HEIGHT
1-1/2”
1-1/2”
CTN QTY
10
10
PART NO.
L75001
L75002
L75006
L75007
DESCRIPTION
Chrome plated angle
Polished brass angle
Chrome plated straight
Polished brass straight
CTN QTY
25
25
25
25
DESCRIPTION
Chrome plated angle
Polished brass angle
Chrome plated straight
Polished brass straight
CTN QTY
25
25
25
25
DESCRIPTION
Chrome plated
Polished brass
CTN QTY
1
1
Ball Valve (1/4” turn)
PART NO.
L75040
L75041
L75042
L75043
Escutcheons Only
PART NO.
L75908
L75909
Combo Log Lighter Valves
Log Lighter Keys and Accessories
• Straight or angle pattern
• 5/16” key and brass plug for extra outlet
included
PART NO.
L75009
L75010
DESCRIPTION
Chrome plated
Polished brass
All Brass Keys
PART NO.
L75019
L75020
L75021
L75023
L75022
L75024
DESCRIPTION
1/4”x 3”
5/16”x 3”
1/4”x 6”
5/16”x 6”
1/4”x 12”
5/16”x 12”
CTN QTY
200
200
240
240
100
100
F
Die Cast Zinc Keys
• Solid brass escutcheon, 1/4” key and close nipple orifice included
• Individually tested (pressure test open and closed after installation)
• Angle: 188,000 BTU/Straight: 120,000 BTU
DESCRIPTION
Chrome plated angle natural gas
Polished brass angle natural gas
Chrome plated straight natural gas
Polished brass straight natural gas
Chrome plated angle LPG
Polished brass angle LPG
Chrome plated straight LPG
Polished brass straight LPG
•1/4” and 5/16” drives on keys
CTN QTY
10
10
Log Lighter Valves with T-Burner
PART NO.
L75406
L75407
L75408
L75409
L75400
L75401
L75402
L75403
Gas Burners/Log Lighter Valves/Access.
CTN QTY
1
1
1
1
1
1
1
1
PART NO.
L75017
L75018
DESCRIPTION
1/4”x 3”
5/16”x 3”
CTN QTY
250
250
DESCRIPTION
7/64” Orifice for natural gas
5/64” Orifice for LP gas
CTN QTY
1
1
Close Nipple Orifices
PART NO.
L75015
L75016
281

Jones Stephens Corp. • PlumBest™ • LTConnections™ SECTION F

Transcription

Similar documents

pvc dwv fittings.................................................... 339-346

construction catalogue

Jones Stephens Corp. • PlumBest™ • LTConnections™ SECTION C

Jones Stephens Corp. • PlumBest™ • LTConnections™ SECTION D

adidas shoes NEW! NEW!