QT 2000 - Edelstahl-Service

 QT 2000
The cut-to-length line for cold- and hot-rolled coils was designed and built in accordance with the latest
findings.
On it, we produce sheets from coils with a thickness of 1.50 to 10.00 mm. Coil widths of 1,000, 1,250,
1,500 and 2,000 mm are possible, while the maximum length is 15,000 mm. Thickness, width and length
tolerances are based on DIN/EN requirements.
Closer tolerances are possible. The required flatness of the sheets is achieved by precision levelers
equipped with 11 or 15 rollers.
Cut-to-length line for cold- and hot-rolled strip
Thickness:
Thickness
tolerance:
Width:
Width tolerance:
Coil widths:
Length:
Length tolerance:
15-roll leveler:
11-roll leveler:
Flatness tolerance:
Surface protection:
Stack weight:
1,50 to 10,00 mm
EN 10259, EN ISO 9445 and EN 10051
1000 to 2000 mm
1000/1250/1500/2000 mm
to EN 10259, EN ISO 9445 / EN 10051
1,000 bis 15,000 mm
3,000 mm 1/4 DIN
for thickness 1,5 to 4 mm
for thickness 4 to 12 mm
max 1/2 standard
one-side film, alternatively: paper
max. 5,000 kg
Top
Printer friendly
Version
Contact
Edelstahl-Service-Center
Heinrich-AugustSchulte-Str. 14
44147 Dortmund
Tel.: +49 0231 8289-0
Fax: +49 0231 8289-102
Brochure
Brochure How to find us
How to find us
Powered by TCPDF (www.tcpdf.org)