Médic Accès - medicacces

CATALOGUE
1-877-782-3017
Mobile / Wall-mounted
PPE Dispensing Systems & Accessory
Médic Accès
2
TABLE OF CONTENTS
Systems
TABLE
OF
CONTENTS
3 to 14
XXXMOBILE SYSTEMS
15 to 20
WALL-SYSTEMS 12, 18 & 24,
TROLLEY DEDICATED TO HYGIENE CARE CDASH
21 to 24
DISPENSERS / MASKS AND TISSUE
26
DISPENSERS / GLOVES
27
BASKETS
28
GOWNS SINGLE USE BASKETS DISPENSERS
29
WASHABLE GOWNS BASKETS DISPENSERS
30
CONTAINERS DISPENSERS
31-32
SHELVES
33
HOOKS
34
DISPENSERS / VARIA
35
Médic Accès
3
TABLE
OF
CONTENTS
Systems
WHY WILL OUR ISO SYSTEMS ALWAYS
REMAIN UP TO DATE?
A reliable design for anchoring PPE dispensers
to the perforated surface of the ISO system
Our ISO systems feature
stainless steel anchors
Aluminum plate
Configured in accordance with your present needs
and able to respond to tomorrow's challenges
Any existing medical supplies can be adapted to fit our dispenser systems
No adhesives, no tools !
Médic Accès
4
TABLE
OF
CONTENTS
Mobile System
Customize your system
on page 5
AVAILABILITY
Immediate and convenient access to PPE dispensers
prior to entering high risk zones greatly
facilitates enforcement of infection control procedures.
Our ISO organizer do just that
MOBILITY
The system is a vertical dispenser
carts for medical
personal protective equipment (PPE)
Mobile, vertical and modular
VERSATILITY
Accomodate every and all brands
of PPE on the market
PERSONALIZED
Entirely personalized by you, according to your
specific requirements
with final assembly at our plant
ISO
SPECIFICATIONS
Overall height : 76'' / 193,04 cm
Main surface ISO : Aluminum, 0.100", 18 X 50'' / 45,72 X 127 cm
Base footing plate : Carbon steel, 1'', 16 X 16'' / 40,64 X 40,64 cm
Wheels :
Front lockable (2), dia. 2 3/4'', 6,98 cm.
Back (2), dia. 2 3/4'', 6,98 cm w/o lock.
Finish : Pure glossy white, thermal baking of electrostatic powder
ISO System
Médic Accès
5
TABLE
OF
CONTENTS
Mobile System
Suggested configuration
ISO System
ISO001
ISO002
ISO003
ISO004
Entirely personalized by you according to your specific requirements, with final assembly at our plant.
Desired configuration
Médic Accès
6
TABLE
OF
CONTENTS
+ Mobile System
Customize your system
on page 7
AVAILABILITY
Immediate and convenient access to PPE dispensers
prior to entering
high risk zones greatly facilitates enforcement
of infection control procedures.
Our ISO + organizer do just that
MOBILITY
The system is a vertical dispenser
carts for medical
personal protective equipment (PPE)
Mobile, vertical and modular
VERSATILITY
Accomodate every and all brands
of PPE on the market
PERSONALIZED
Entirely personalized by you, according to your
specific requirements
with final assembly at our plant
ISO +
MODULAR SPECIFICATIONS
Overall height : 76'' / 193,04 cm
Main surface ISO+ : Aluminum, 0.100", 18 X 72'' / 45,72 X 182,88 cm
Base footing plate : Carbon steel, 1'', 16 X 16'' / 40,64 X 40,64 cm
Wheels :
Front lockable (2), dia. 2 3/4'', 6.98 cm
Back (2), dia. 2 3/4'', 6.98 cm w/o lock.
Finish : Pure glossy white, thermal baking of electrostatic powder
ISO+ System
Médic Accès
7
TABLE
OF
CONTENTS
+ Mobile System
Suggested configuration
ISO+ System
ISO+001
ISO+002
ISO+003
ISO+004
Entirely personalized by you according to your specific requirements, with final assembly at our plant.
Desired configuration
Médic Accès
TABLE
OF
CONTENTS
8
Merger of the two systems / ISO+ & Clip-Unclip
Cli
Unclip
TM
Removable Clip-Unclip
ISO+ System
Médic Accès
9
TABLE
OF
CONTENTS
-D Mobile System
Customize your system
on page 10
Two sides for more storage
ALWAYS IN ACTION
ISO-D mobile system.
Elaborated for situations involving frequent
travels with the PPE supplies.
The system consist of
a vertically oriented organizer cart
for PPE dispensing.
Mobile, vertical and modular.
VERSATILITY
Accomodate every and all
brands of PPE on the market
LARGE CAPACITY
ISO-D
The two large surfaces can
accommodate all you needs
PERSONALIZED
May be personalized by you,
according to your
specific requirements prior
final assembly at our plant
ISO-D
SPECIFICATIONS
Overall height : 64'' / 162,56 cm
Main surface: Two (2), aluminum,
0.100", 18 X 40'' / 45,72 X 101,60 cm
Base legs : Five, tubular steel 0.100", 13'' / 33,02 cm
Wheels : Five (5), 2'', 5,08 cm without lock.
Surface finish :
Pure glossy white, thermal baking of electrostatic powder
ISO-D System
Médic Accès
10
TABLE
OF
CONTENTS
-D Mobile System
Suggested configuration
Two sides
for more
storage
ISO-D System
ISO-D001
ISO-D002
ISO-D003
ISO-D004
Entirely personalized by you according to your specific requirements, with final assembly at our plant.
Desired configuration
Médic Accès
11
TABLE
OF
CONTENTS
-E Mobile System
Customize your system
on page 12
One side
ALWAYS IN ACTION
ISO-E mobile system.
Elaborated for situations involving frequent
travels with the PPE supplies.
The system consist of
a vertically oriented organizer cart
for PPE dispensing.
Mobile, vertical and modular.
VERSATILITY
Accomodate every and all
brands of PPE on the market
PERSONALIZED
May be personalized by you,
according to your
specific requirements prior
final assembly at our plant
ISO-E
SPECIFICATIONS
Overall height : 64'' / 162,56 cm
Main surface: One (1), aluminum,
0.100", 18 X 40'' / 45,72 X 101,60 cm
Base legs : Five (5), tubular steel 0.100", 13'' / 33,02 cm
Wheels : Five (5), 2'', 5,08 cm without lock.
Surface finish :
Pure glossy white, thermal baking of electrostatic powder
ISO-E System
Médic Accès
12
TABLE
OF
CONTENTS
-E Mobile System
Suggested configuration
One side
ISO-E System
ISO-E001
ISO-E002
Entirely personalized by you according to your specific requirements, with final assembly at our plant.
Desired configuration
Médic Accès
TABLE
OF
CONTENTS
13
Custom Made Mobile ISO System
ER
Where rooms are curtained off and there are no solid walls:
clean and dirty meet in the corridors.
The solution! ISODU-001
Spacing between the plates 3''.
Curtains insertion between
the two plates.
Clean side corridor (wall consisting of curtains)
Dirty side bedroom (wall consisting of curtains)
ISO-DU001 System
To isolate droplets and splashes, the dirty side plate is without perforation,
wider and taller than the clean side plate .
Médic Accès
TABLE
OF
CONTENTS
14
Custom Made Mobile ISO Systems
Isolation station for a mental health environment.
ISO
No detachable dispenser.
ISO-G System
The ISO-G is composed of the following dispensers.
G03V Gloves (3 boxes) with vertical grip
SG20 Single use gowns 2 X 10
M01 Standard masks
M05 Masks with visor
V01A Wipes
PP05 X 3 Multipurpose baskets
MICRO01 Microsan (DEB) 500ml
DR04 Collection basket
Médic Accès
15
TABLE
OF
CONTENTS
Wall-mounted
Systems
ISO-12
ISO-24
WALL-MOUNTED
SWIVEL ORGANIZER
ISO-18
WITH EASY ANCHORING,
ISO SYSTEMS WILL ALWAYS
REMAIN UP TO DATE
Médic Accès
16
TABLE
OF
CONTENTS
Customize your system
on pages 17-18 and 19
Wall-mounted Systems
One wall-mounted unit can covert PPE requirements for up to 4 patient rooms,
depending on the distance separating the rooms.
Each modular system may be fully personalized to reflect your specific needs prior to final assembly at our plant.
The wall-mounted organizer consists mainly in a vertically oriented surface designed for
dispensing personal protective equipment (PPE) medical supplies.
Installation of all modules does not require any tools because stainless steel screws and wing nuts are provided.
Medical care personnel or any other user will have immediate access to specialized and state of the art
protective supplies according to the conditions prevailing in their environment.
23" 1/4 / 63,50 cm
ISO-12
36" / 91,44 cm
36" / 91,44 cm
ISO-18
36" / 91,44 cm
ISO-24
17" 1/4 / 43,81 cm
11" 1/4 / 28,57 cm
The wall-mounted systems are 36 inch high / 91,44 cm
but are manufactured in 3 differents width formats
Available width formats : 11 1/4", 17 1/4" & 23 1/4" / 63,50, 43,81 & 28,57 cm
SWIVEL
The swivel organizer is designed to facilitate cleaning and
disinfection procedures by maintenance personnel
ISO-12-18-24
Specifications
Overall height : 36'' / 91,44 cm
Main surface plate ISO : Aluminum, 0.100"
Hinges : hinges, continuous, steel, 0.100'',
36 x 1'' / 91,44 X 2,54 cm
Surface finish : Pure glossy white, thermal baking
of electrostatic powder
Médic Accès
17
TABLE
OF
CONTENTS
-24 Wall-mounted Systems
Our largest wall ISO system
Suggested configuration
ISO-24 System
ISO-24001
ISO-24002
ISO-24003
ISO-24004
Entirely personalized by you according to your specific requirements, with final assembly at our plant.
Desired configuration
Can be installed
horizontally
Médic Accès
18
TABLE
OF
CONTENTS
-18 Wall-mounted Systems
Suggested configuration
ISO-18 System
ISO-18001
ISO-18002
ISO-18003
ISO-18004
Entirely personalized by you according to your specific requirements, with final assembly at our plant.
Desired configuration
Can be installed
horizontally
Médic Accès
19
TABLE
OF
CONTENTS
-12 Wall-mounted Systems
Suggested configuration
ISO-12 System
ISO-12001
ISO-12002
ISO-12003
ISO-12004
Entirely personalized by you according to your specific requirements, with final assembly at our plant.
Desired configuration
Can be installed
horizontally
Médic Accès
20
TABLE
OF
CONTENTS
ISO Wall system specialized assembly
Cli
Unclip
System
TM
Besides being adapted Clip-Unclip, this ISO plate is configured
according to a specific request.
Médic Accès
21
TABLE
OF
CONTENTS
Contamination of the environment
when changing adult briefs.
Direct contamination of furniture
and bedding
Contamination of bedding
Contamination of bed rails
Contamination of furniture
Contamination of door handles
Sorting of soiled materials and
contamination of the area
outside the room
Médic Accès
TABLE
OF
CONTENTS
22
Reduce environmental contamination,
improve hand hygiene and save
time with a single tool
Using the hygiene care dedicated cart (C-DASH)
Original idea and execution:
Layal Abou-Chacra, RN, MSc
Clinical nurse Specialist – ICP
Design and manufacture: Médic Accès
Médic Accès
23
TABLE
OF
CONTENTS
Presentation of the C-DASH cart
Alcohol solution
Disinfecting wipes
Trash bag
Resident/Patient
clothing bag
Bedding and
towel bag
Médic Accès
Médic Accès
24
TABLE
OF
CONTENTS
How to eliminate environmental contamination during hygiene care using a C-DASH cart.
1
3
2
4
Disinfect your hands using
the alcohol-based solution
attached to the cart.
Prepare the materials
for providing a bedbath
or perineal care
and draw the cart up
near the patient/resident.
Install clean new bags.
At the start of each work shift:
Take a disinfecting wipe.
Close the container.
Disinfect the entire cart.
5
6
7
Remove the soiled briefs.
Immediately dispose of them
in the cart trash bag and
clean the patient/resident.
Dispose of the soiled briefs,
facecloths and linen
in the respective
bags on the cart.
After completing the
hygiene care, dispose
of everything that is soiled.
Immediately discard your
gloves in the cart trash bag.
9
Put gloves on just before
carrying out hygiene care.
10
11
8
Disinfect your hands using
the alcohol-based solution
on the cart.
12
After contact with the resident
and the person's environment,
disinfect your hands using
the alcohol-based solution
on the cart.
When your hands are clean,
put the clean briefs on the
patient/resident and dress
the person again.
Remove the waste bags as
soon as they are half-full.
Disinfect your hands.
At the end of each work shift:
Take a disinfecting wipe from
the container.
Close the container.
Disinfect the entire cart.
Take off your gloves and
disinfect your hands.
Using this method with the C-DASH Hygiene Care Dedicated Cart,
contamination of the environment is greatly reduced.
25
MINIMAL SURFACE EXPOSURE
The robust wire mesh we use to manufacture our
holders/dispensers offers many
advantages to infection control personnel.
With a minimal surface area exposed to airborne components,
the accumulation of foreign contaminants is negligeable.
The wire mesh is quickly cleaned and resist to
desinfectants and harsh chemicals.
The mesh is dipped and coated with electrostatic treatment
of a thermoplastic powder which is oven-baked
at high temperature to leave a glossy finish as a durable
protection against impact and corrosion for decades to come.
The wire mesh holders are designed for the PPE supplies
required for the infection control sector and may be attached
to most surfaces and to our ISO and CLIP-UNCLIP stations.
Holders/dispensers available for every commercial
medical PPE carton format on the market.
Médic Accès
TABLE
OF
CONTENTS
26
M01
TABLE
OF
CONTENTS
Médic Accès
One carton
Height Length Depth
4 3/4'' x Free length x 4 1/4''
12,06 cm x 10,79 cm
MASKS AND HANDKERCHIEFS DISPENSERS
All our dispensers can be custom made
according to the specifications of your supplies.
M02
M03
One carton
One carton N95
Height Width Depth
Free height x 3 3/8'' x 2''
8,89 cm x 5,08 cm
Height Width Depth
Free height x 5'' x 6 1/4''
12,70 cm x 15,87 cm
M04
M05
One carton
One carton
Height Width Depth
Free height x 9'' x 4 3/4''
22,86 cm x 12,06 cm
Height Width Depth
Free height x 10'' x 4''
25,40 cm x 10,16 cm
M06
T02
One carton
Height Width Depth
Free height x 8'' x x 4 5/8''
10,16 cm x 11,74 cm
One carton handkerchiefs
White Swan
T01
One carton handkerchiefs
Height Width Depth
5 1/4'' x Free width x 2 5''
13,335 cm x 6,35 cm
27
TABLE
OF
CONTENTS
G01F
Médic Accès
GLOVES / DISPENSERS
All our dispensers can be custom made
according to the specifications of your supplies.
Three-way for vertical or horizontal wall mounting
Height Width Depth
5 1/8'' x free width x 3 3/4''
13,18 cm x 9,52 cm
One carton
G03F
Height Width Depth
for each carton
5 1/8'' x free width x 3 3/4''
13,18 cm x 9,52 cm
G01F /G03F / G04F / G05F
Three cartons with
dividers
G04F
G03
Height Width Depth
for each carton
5 1/8'' x free width x 3 3/4''
13,18 cm x 9,52 cm
Height Width Depth
for the three carton
16'' x 10 3/8'' x 4 1/4''
40,64 cm x 10,79 cm
Four cartons with
dividers
Three cartons
G05F
G03V
Height Width Depth
for each carton
5 1/8'' x free width x 3 3/4''
13,18 cm x 9,52 cm
Height Width Depth
for each box
G03V
9.83'' (24,96 cm)
3.75'' (9,52 cm)
5 1/8'' (12,75 cm)
Five cartons with
dividers
Three cartons
G04
Height Width Depth
for the for carton
17 3/4'' x 10 3/8'' x 4 1/4''
45,08 cm x 10,79 cm
Four cartons
Eliminate waste!
Dispenser with 3 boxes of vertical release
Clip-Unclip
28
TABLE
OF
CONTENTS
Médic Accès
BASKETS
All our dispensers can be custom made
according to the specifications of your supplies.
PP01
PP02
Multiple-use wire mesh bin
Four compartment multiple-use
wire mesh bin
H 8 5/8'' / 20,63 cm
W 11'' / 27,94 cm
D 5 3/8'' / 13,64 cm
H 6'' / 15,24 cm
W 24'' / 60,96 cm
D 6 1/4'' / 15,87 cm
PP03
PP04
Multiple-use wire mesh bin
Multiple-use wire mesh bin
H 6'' / 15,24 cm
W 6'' / 15,24 cm
D 6'' / 15,24 cm
H 6'' / 15,24 cm
W 10'' / 25,40cm
D 10'' / 25,40 cm
PP05
RT01
Multiple-use wire mesh bin
Soiled mask disposal bin
fitted for Hand hygiene
station «B»
H 6'' / 15,24 cm
W 10'' / 25,40cm
D 10'' / 25,40 cm
H 15 1/8'' / 38,42 cm
W 16'' / 40,64 cm
D 9 1/2'' / 24,13 cm
29
TABLE
OF
CONTENTS
Médic Accès
DISPOSABLE GOWNS / DISPENSERS
All our dispensers can be custom made
according to the specifications of your supplies.
SG10
SG20
One bag X 10 gowns
ISO & Clip-Unclip
W 10 1/8'' X D 4 1/8'' X H 10''
W 25,71 x D 10,47 x H 25,4 cm
Two bag X 10 gowns
= 20 gowns
ISO & Clip-Unclip
W 10 1/8'' X D 7 1/8'' X H 10''
W 25,71 x D 18 x H 25,4 cm
SG20A
DY1S
One bag X 10 gowns
ISO & Clip-Unclip
W 12'' X D 4 3/4'' X H 15''
W 30,48 x D 12 x H 38 cm
Ten bags X 10 gowns
= 100 gowns
Mobility handrails,
ISO & Clip-Unclip
DY1
DY4S
Ten bags X 10 gowns
= 100 gowns with lid
Mobility handrails,
ISO & Clip-Unclip
Six bags X 10 gowns
= 60 gowns
Mobility handrails,
ISO & Clip-Unclip
DR03C
DY6S
Clip-Unclip Baskets
for retrieving wet cloth or
waste inside bedrooms
dimensions
Height: 7" / 17,78 cm
Width: 19" / 48,26 cm
Depth: 12" / 30,48 cm
Four bags X 10 gowns
= 40 gowns
ISO & Clip-Unclip.
30
TABLE
OF
CONTENTS
Médic Accès
WASHABLE GOWNS / DISPENSERS
All our dispensers can be custom made
according to the specifications of your supplies.
DY3
DY3S
Medium-size bin with lid
for washable gown.
Handrail, ISO & Clip-Unclip
Medium-size bin
for washable gown.
Handrail, ISO & Clip-Unclip
W 17'' / 43,18 cm
H 25'' / 63,50 cm
D 9 1/2'' / 24,13 cm
W 17'' / 43,18 cm
H 25'' / 63,50 cm
D 9 1/2'' / 24,13 cm
Baskets presented with white plastic insert PQ01 (additional charge)
DR03
DR03S
Large-size bin with lid
for washable gown.
Handrail,ISO & Clip-Unclip
Large-size bin
for washable gown.
Handrail,ISO & Clip-Unclip
W 19'' / 48,26 cm
H 21'' / 53,34 cm
D 11 1/4'' / 28,57 cm
W 19'' / 48,26cm
H 21'' / 53,34cm
D 11 1/4'' 28,57cm
DY5
DY5S
Horizontal bin with lid
for washable gown
Horizontal bin
for washable gown
W 29'' / 73,66 cm
H 12'' / 30,48 cm
D 10'' / 25,40 cm
W 29'' / 73,66 cm
H 12'' / 30,48 cm
D 10'' / 25,40 cm
DR04
PQ01
Basket
White plastic insert
for gown bins
W 14'' / 35,56 cm
H 16 1/2'' / 41,91cm
D 10'' / 25,40cm
31
TABLE
OF
CONTENTS
V01A
Médic Accès
CONTAINERS / DISPENSERS
Fits most bleach and
peroxide wipe drum
All our dispensers can be custom made
according to the specifications of your supplies.
D 5'' / 12,70 cm
V01B
V02A
Fits Accel TB
60-wipes drum
Wheelchair
Fits most bleach and
peroxide wipe drum
D 3'' 1/4 / 8,25 cm
D 5'' / 12,70 cm
V01D
MAN01
Fits large drum
Fits Manorapid 1L pump
dispenser
D 5 5/8'' / 14,28 cm
W 3 3/8'' x D 2 7/8''
W 8,57 x D 7,30 cm
ISA01
MICRO01
Fits Isagel 621 ml
pump dispenser
Fits Microsan
400 ml pump dispenser.
MICRO02
MICRO03
Fits Microsan
400 ml pump
to bed foot
(1” / 2,54 cm or less)
Fits Microsan
400 ml pump
to bed foot
(2” / 5,08 cm or less)
32
SV01
TABLE
OF
CONTENTS
Médic Accès
Cup holder
CONTAINERS / DISPENSERS
All our dispensers can be custom made
according to the specifications of your supplies.
W 3 1/4'' / 8,25 cm
D 3 1/4'' / 8,25 cm
V01E
BOTL01
Ecolab
bottle holder
Bottle holder
D 2 3/4'' / 6,98 cm
Stand for a box of gloves or handkerchiefs
MH22.5
MH22.5
Maximum width
4 3/4'' / 12,7 cm
No minimum width
Minimum height
8'' / 20,32 cm
Minimum depth
2'' / 5,08 cm
Incline 22,5 %
When the box is half-empty, the gloves or tissues tend to fall to the bottom.
It's then necessary to reach inside to get a new one and in doing so, it
becomes hard to take one out at a time.
Touching several gloves or tissues at once or putting them back in the box
can contribute to spreading germs and is thus unhygienic.
Our MH22.5 stand for a box of gloves or tissues is ideal for avoiding this type of problem.
The box sits on an inclined base, keeping the gloves or tissues resting against the
front surface of the container so that they won't fall to the bottom.
The gloves or tissues are more accessible and can easily be pulled out,
one by one, while remaining dust-free.
33
TABLE
OF
CONTENTS
Médic Accès
SHELFS
All our dispensers can be custom made
according to the specifications of your supplies.
TA01
TA02
Aluminum shelf
Wire shelf
Ideal for ISO+ station
W 9'' / 22,86 cm
D 7 3/4'' / 19,68 cm
W 24'' / 60,96 cm
D 12'' / 30,48 cm
TA03
TA04
Aluminum shelf
Aluminum shelf
W 22'' / 55,88 cm
D 6'' / 15,24 cm
W 15'' / 38,10 cm
D 10'' / 25,40 cm
CLIP104
INS01
Wire shelf
Clip-Unclip
Acrylic top for wire shelf
W 26'' / 66,04 cm
D 7'' / 17,78 cm
W 23'' / 58,42 cm
D 11'' / 27,94 cm
34
TABLE
OF
CONTENTS
Médic Accès
HOOKS
All our dispensers can be custom made
according to the specifications of your supplies.
C1
C1A
Hook
Hook
C1B
C2
Simple hook long rod
Double hook
C3
C4
Triple hook
Quadruple hook
C4M
C1D
Coats hanger
Clip-Unclip
Quadruple hook
Removable hook
multi-use door hanger
Message sign
35
TABLE
OF
CONTENTS
Médic Accès
DISPENSERS / VARIA
All our dispensers can be custom made
according to the specifications of your supplies.
ACCU01
SGV
Fits Accu-Check carton
Fits Vernacare bags
H 5 1/2'' / 13,97 cm
W Free width
D 2'' / 5,08 cm
H Free height
W 12 1/2'' / 31,75 cm
D 2 5/8'' / 6,67 cm
AD01
D01
Unbreakable plastic
anti-spill shelf.
Can be screwed on.
Beige color
Brochure dispenser
W 5 1/4'' / 13,33 cm
D 7'' / 17,78 cm
8 1/2'' X 11''
Folded in three
ASM01
Universal IV pole
attachment
Accepts rods
4.7 cm diameter
TABLE
OF
CONTENTS
Médic Accès
Greetings,
At Médic Accès, we manufacture high quality
hospital PPE organizers and dispensers that are
crafted and recognized for their durability.
Our reputation provides the assurance that our mobile
and wall-dispensing ISO units will remain dependable,
state-of-the-art systems for years to come.
Quest for excellence
Your comments and suggestions are most welcome if ever our manufactured
products fail to provide complete satisfaction to the end-users.
At Médic Accès, we do our utmost to design products that meet our customers'
requests and specifications. Our mission consists of
manufacturing superior quality products that respond to your needs at all times!
We owe our success to the innovative and visionary spirit that guides us and to the,
special attention we give to crafting market-driven products in response to changing
customer needs.
For the last eight years, you and I have been collaborating and I would like to take this
opportunity to thank you sincerely for your ideas, help and trust which have certainly
contributed to the success of Médic Accès our continuing development
and success.
Thanks to you all and I look forward to meeting with you again.
Denis Sirois
President
1004, Lauzanne,
St-Jérôme (Québec) Canada J5L 1V8
Toll-free: 1-877-782-3017 Fax : 450-592-1921
[email protected]
©2009 Médic Accès Inc. All rights reserved.
All rights, including authors' rights, for all materials and information available in
this catalogue are strictly the property of Médic Accès Inc, unless stated otherwise.
All trademarks are the property of their respective owners.
All materials and information available in this catalogue are for
private use provided that rights and property are acknowledged.
Any other use is strictly forbidden. It is prohibited to modify, publish or
reproduce in another catalogue, on a website or on the Internet, for public or commercial
uses, any materials and information available in this catalogue without
the express consent of Médic Accès Inc. and its principals.