The 1975 Honda CB360T Rebuild Project

The 1975 Honda CB360T Rebuild Project
While snooping at my local auto salvage yard I found a clean low mileage wrecked Honda 360T. Other
than the tank, forks, handlebar, and frame it was in great shape. The price was right and a new project had
begun.
On Ebay, I found a good tank and on contacting the owner, found out that he also had a good frame with
a title. I love Ebay!
Written by: Ken P. Carlson
Doing the job right called for repainting the frame.
Rather than struggle with a partially disassembled bike falling down, I hung it up with an engine hoist.
Worked great as it not only raised it up by it swings around for working both sides.
Written by: Ken P. Carlson
This was a good time to take pictures of cables and wiring to refer to later on.
Written by: Ken P. Carlson
Just about have the old bike stripped down.
Trying hard to organize the parts in the order removed for reinstallation.
Written by: Ken P. Carlson
Now the fun part starts with the new frame and putting it all back together.
Sure glad I have pictures to tell me how this snake pit goes back together!
Written by: Ken P. Carlson
The effort was well worth the end result. This is one sweet little bike.
Written by: Ken P. Carlson