YTX20HL-BS - MDS Battery

Comments

Transcription

YTX20HL-BS - MDS Battery
YTX20HL-BS
High Performance, Maintenance Free Battery
VRLA (Valve Regulated Lead Acid) technology is an advanced battery
design used in Yuasa’s Maintenance Free Batteries that eliminates water
loss. Once it’s filled with acid the battery is permanently sealed – so you’ll
never need to fill it with water or check the acid level.
Features and Benefits:
More Lead Plates and Radial Grid Design – 12 more lead plates and
radial grid design deliver increased cranking amps, greater conductivity
and reserve capacity to spare.
Sealed, Non-spillable – Once filled with acid, the VRLA battery is virtually
maintenance free. It’s totally sealed and the acid is absorbed in
the special plates and separators. Its spill-proof design lends itself
to many applications.
More Power – Lead/calcium plate design produces high rate discharge
current for greater starting combined with excellent reserve capacity.
Long Life – Because of its lead/calcium design, the MF battery will hold its
specific gravity more than three times longer than conventional lead/antimony types. This means much longer periods
between charges when the battery is used in a standby mode (as in winter storage).
Sulfation Retardant – A special chemical is added to the MF battery acid which retards the formation of battery killing
sulfation on the plates.
10 Hour-Rate Discharge Characteristics
DISCHARGE CURRENT
ACID TEMPERATURE
TEST END VOLTAGE
Specifications
1.8 AMP
25 ± 2° C
10.5 V
Normal Capacity
10 Hr. Rated ..............................................................18 A.H.
Weight (approx.)
Dry ...........................................................................12.4 lbs.
Wet ..........................................................................15.1 lbs.
11
10
Dimensions
Length.......................................................................6 7/8 in.
Width .......................................................................3 7/16 in.
Height .......................................................................6 1/8 in.
0
Cold Cranking Ampere
0OF (-18OC)............................................................310 amp.
32OF (0OC) .............................................................390 amp.
Reserve Capacity ...................................................30 min.
1
2
3
4
5
6
7
Discharge Time (Hours)
8
9
10
High-Rate Discharge Characteristics
5 Second Voltage (V)
Cold High Rate Discharge
Temperature ...............................................................-10OC
Discharge Current...............................................150 amp.
Voltage after 5 seconds ....................................10.3 volts.
Duration...................................................................2.0 min.
TERMIN
AL VO
LTAG
E
12
12
11
10
9
8
9
Recommended Charging Current.....................1.8 amp.
Acid Volume............................................................31.4 oz.
Duration Time (Minutes)
Voltage.....................................................................12 volts
Terminal Voltage (V)
13
5 SEC
. VOLT
AGE
7
6
25°C (77°F)
5
DU
RA
T IO
N TI
ME
4
3
2
25°C (77°F)
0°C (32°F)
-10°C (14°F)
1
0
100
Terminal Configuration .......................................Pos.-Right
0°C (32°F)
-10°C (14°F)
125
150
175
Discharge Current (Amp)
Yuasa Battery, Inc. • P.O. Box 14715, Reading, PA 19612-4715 • Toll Free: 1-866-431-4784 • yuasabatteries.com
Yua-111 (11/02)
© 2002 Yuasa, Inc.
Printed in U.S.A.