Bearing Maintenance Tools

Bearing Maintenance Tools
For the installation and removal of bearings to ensure long, reliable
machine life, ease of tear down and quick turnaround time
NSK Bearing
Maintenance
Tools
NSK is a global leader in bearing manufacturing and related technologies. Our offering
of maintenance tools is an extension of our position as an authority in maintenance
reliability. Using the proper maintenance tools for bearing installation and removal
ensures long reliable machine life, ease of tear down and quick turnaround time.
NSK’s family of maintenance tools consists of:
• Sine Bar Gages
• Bearing Heaters
• Roll Neck Lifting Tools
• Pullers
• Pushers
• Taper Gage (Shaft Taper)
• Straighteners
• Hydraulic Nuts
• Ring Gauges (Housing Bore)
• Pumps
• Wrenches
• GN Gauges (Radial Clearance)
• Jack-Up Nut
Our extensive offering of tools are backed by the NSK name and come in full
size ranges and convenient and high quality carrying cases. Purchase of any
of NSK's maintenance tools can be made through an authorized NSK distributor.
NSK is dedicated to being your partner and supplier of choice for your motion
and control needs. If you have questions relating to NSK maintenance tools or require
assistance, please speak with your local authorized distributor, your local NSK
representative or email us at [email protected].
NSK Sine
Bar Gages
Certified NSK sine bar gages
are designed to provide an
accurate and easy method
to check a journal seat’s taper,
size, out-of-roundness and
contact area.
Page 3-4
NSK
Bearing
Heaters
Page 5-6
1
NSK versatile bearing
induction heaters are used
to quickly and easily install
straight bore bearings
onto shafts.
Pullers, Pushers,
Straighteners
& Tri-Section
Press Plates
Page 7-10
Pullers, pushers, straighteners
NSK
Hydraulic
Nuts
A hydraulic nut utilizes fluid
and tri-section press plates
are used to easily and quickly
install and remove bearings,
rings, pulleys, and gears
from shafts while minimizing
damage of the bearing shaft
and bodily harm that may occur
during the removal process.
power to mount and dismount
tapered bore bearings.
NSK’s hydraulic nuts were
manufactured with a patented
axial displacement measuring
system making them easier
and quicker to use compared
to conventional nuts.
Page 11-16
Hydraulic
Pump
NSK hydraulic pumps are
used in conjunction with
hydraulic nuts and pullers
to mount and dismount
tapered bore bearings.
They can also be used by
Page 17
themselves for oil-assisted
Spanner
Wrench
Spanner wrenches are
bearing removal.
used in the hand mounting
and removal of tapered
bore bearings.
Page 18
2
NSK Sine Bar Gages
Style
-3
-4
-5.5
-7
-10
-14
BOX/SET K30
BOX/SET K
BLOCK 1/2
BLOCK 3/8
Taper
K = 1:12
K30 = 1:30
Base number
SINEBAR
Accurate fit between a tapered bore bearing and its journal
is critical if a bearing is to reach maximum life. Certified
NSK Sine Bar Gages are designed to provide an accurate
and easy method to measure a journal’s taper, size,
contact area and out of roundness.
A complete sine bar gage set for measurement of either
1:12 or 1:30 shaft tapered journals consists of:
• 3,4,5.5,7,10 and 14 inch long sine bar gages
• 2 sine bar blocks
• a strap
• calibration reports
• wooden box for transportation
• 2 clamps
• journal details charts
• instructions for use
NSK sine bars are coated with a special anti-rusting
treatment, come with easy to read laminated instructions
and are available individually, in combination or as
complete sets. They are lightweight, easy to handle and a
cost effective way to ensure maximum bearing life.
3
K
-5.5
=
=
=
=
=
=
=
=
=
=
one 3 inch long sine bar
one 4 inch long sine bar
one 5.5 inch long sine bar
one 7 inch long sine bar
one 10 inch long sine bar
one 14 inch long sine bar
complete set in box
complete set in box
block used with large bars
block used with small bars
Block
Gage
Strap
CORP
BEARING
1:12 Tapered Journal
BORE SIZE
Bore
Symbol
Bore Millimeters
222 SERIES
Bore Inches
Gage
No.
223 SERIES
230 SERIES
Block Gage Block Gage
No.
No.
No.
No.
231 SERIES
Block Gage
No.
No.
1:30 Tapered Journal
232 SERIES
Block
No.
Gage
No.
Block
No.
238 SERIES
239 SERIES
Gage Block
No.
No.
Gage Block
No.
No.
240 SERIES
Gage
No.
241 SERIES
Block Gage
No.
No.
Block
No.
20
100
3.9370
3
3/8
3
3/8
3
3/8
22
110
4.3307
3
3/8
3
3/8
3
3/8
3
3/8
24
120
4.7244
3
3/8
3
3/8
3
3/8
3
3/8
3
3/8
26
130
5.1181
3
3/8
3
3/8
3
3/8
3
3/8
3
3/8
3
3/8
28
140
5.5118
3
3/8
4
3/8
3
3/8
3
3/8
3
3/8
3
3/8
30
150
5.9055
3
3/8
4
3/8
3
3/8
3
3/8
3
3/8
4
3/8
32
160
6.2992
3
3/8
4
3/8
3
3/8
4
3/8
3
3/8
4
3/8
34
170
6.6929
3
3/8
4
3/8
3
3/8
3
3/8
4
3/8
3
3/8
4
3/8
36
180
7.0866
3
3/8
4
3/8
3
3/8
3
3/8
4
3/8
4
3/8
4
3/8
38
190
7.4803
3
3/8
4
3/8
3
3/8
4
3/8
4
3/8
4
3/8
4
3/8
40
200
7.8740
3
3/8
5.5
3/8
3
3/8
4
3/8
4
3/8
3
3/8
4
3/8
5.5
3/8
44
220
8.6614
4
3/8
5.5
3/8
3
3/8
4
3/8
5.5
3/8
3
3/8
4
3/8
5.5
3/8
48
240
9.4488
4
3/8
5.5
3/8
3
3/8
4
3/8
5.5
3/8
3
3/8
4
3/8
5.5
3/8
52
260
10.2362
4
3/8
5.5
3/8
4
3/8
5.5
3/8
5.5
3/8
3
3/8
5.5
3/8
7
1/2
56
280
11.0236
4
3/8
5.5
3/8
4
3/8
5.5
3/8
5.5
3/8
3
3/8
3
3/8
5.5
3/8
7
1/2
60
300
11.8110
5.5
3/8
4
3/8
5.5
3/8
7
1/2
3
3/8
3
3/8
5.5
3/8
7
1/2
64
320
12.5984
5.5
3/8
4
3/8
5.5
3/8
7
1/2
3
3/8
3
3/8
5.5
3/8
7
1/2
68
340
13.3858
4
3/8
7
1/2
7
1/2
3
3/8
3
3/8
7
1/2
7
1/2
72
360
14.1732
4
3/8
7
1/2
7
1/2
3
3/8
3
3/8
7
1/2
7
1/2
76
380
14.9606
4
3/8
7
1/2
7
1/2
3
3/8
4
3/8
7
1/2
7
1/2
80
400
15.7480
5.5
3/8
7
1/2
10
1/2
3
3/8
4
3/8
7
1/2
10
1/2
84
420
16.5354
5.5
3/8
7
1/2
10
1/2
3
3/8
4
3/8
7
1/2
10
1/2
88
440
17.3228
5.5
3/8
7
1/2
10
1/2
3
3/8
4
3/8
7
1/2
10
1/2
92
460
18.1102
5.5
3/8
7
1/2
10
1/2
3
3/8
4
3/8
7
1/2
10
1/2
96
480
18.8976
5.5
3/8
7
1/2
10
1/2
3
3/8
4
3/8
7
1/2
10
1/2
/500
500
19.6850
5.5
3/8
10
1/2
10
1/2
3
3/8
4
3/8
7
1/2
10
1/2
/530
530
20.8661
7
1/2
10
1/2
10
1/2
3
3/8
5.5
3/8
10
1/2
10
1/2
/560
560
22.0472
7
1/2
10
1/2
14
1/2
3
3/8
5.5
3/8
10
1/2
14
1/2
/600
600
23.6220
7
1/2
10
1/2
14
1/2
3
3/8
5.5
3/8
10
1/2
14
1/2
/630
630
24.8031
7
1/2
10
1/2
14
1/2
4
3/8
5.5
3/8
10
1/2
14
1/2
/670
670
26.3780
7
1/2
10
1/2
14
1/2
4
3/8
5.5
3/8
10
1/2
14
1/2
/710
710
27.9528
7
1/2
10
1/2
14
1/2
4
3/8
7
1/2
10
1/2
14
1/2
/750
750
29.5276
7
1/2
14
1/2
14
1/2
4
3/8
7
1/2
10
1/2
14
1/2
/800
800
31.4961
10
1/2
14
1/2
14
1/2
5.5
3/8
7
1/2
10
1/2
14
1/2
/850
850
33.4646
10
1/2
14
1/2
14
1/2
5.5
3/8
7
1/2
14
1/2
14
1/2
/900
900
35.4331
10
1/2
14
1/2
14
1/2
5.5
3/8
7
1/2
14
1/2
14
1/2
/950
950
37.4016
10
1/2
14
1/2
14
1/2
5.5
3/8
7
1/2
14
1/2
14
1/2
/1000
1000
39.3701
10
1/2
14
1/2
14
1/2
5.5
3/8
10
1/2
14
1/2
14
1/2
BORE SIZE
Bearing
Bore Number Millimeters
I -112618
I -112630
250
350
Bore Inches
9.8425
13.7795
I SERIES
Gage Block
No.
No.
4
7
NOTE: Empty spaces in the above chart indicate that a bearing is not an ISO standard size.
3/8
1/2
4
NSK Bearing Heaters
Maximum Current
Capacity (KVA)
A = 10A
B = 15A
English-Language Model
NSK Bearing Heater
CHE
01
10
A
Voltage
10:
12:
20:
22:
Capacity (KVA)
100
120
200
220
-E
Frequency
V
V
V
V
50: 50 Hz
60: 60 Hz
NSK Bearing Heater
English-Language Model
CHE
02
Induction heaters are a preferred and much safer
method of heating a bearing than using a flame or oil bath.
Bearing heaters produce strong alternating magnetic fields
that induce eddy currents in the metals. The currents
cause rapid and efficient heating of the component and
the low voltage output eliminates any hazards due to
shocks or sparks.
Bearing heaters from NSK are a fast, safe and efficient way
to mount straight bore bearings onto shafts. They provide
uniform inner ring heating that helps to reduce bearing
mounting, time and cost. With automatic temperature and
demagnetizing control features, a light and compact design,
and the versatility to heat many different bearing sizes and
types of components, NSK bearing heaters are a must have
for maintenance professionals.
5
10
-50
E
Model No.
Power source voltage (V)
Capacity
(KVA)
CHE0110A
CHE0110B
CHE0210
100
100
100
200
200
1
1.5
2
2
4
No. of phases
Frequency
Dimensions
(mm)
(Hz)
CHE0220
CHE0420
CHE0720(2)
CHE1220(2)
CHE2020(2)
200
200
200
7
12
20
Single
Single
Single
50 and 60
50 or 60
50 or 60
Height
H
236
236
504
1115
Width
W
158
158
500
600
600
472 (624)
710
1280
1365
18.5
75
242
278
max 355
Length L(L’)(1)
Weight
(kg)
B
Applicable bearing sizes A
(mm) A
d
B
d
320 (480)
353 (513)
11.7
13.2
max 70
max 100
max 110
max 175
max 310
max 70
max 90
max 80
max 200
max 300
max 400
More than ø20
More than ø35
More than ø50
More than ø50
• Three l-shaped cores;
15 x 15 mm; For bores ø20~ø35
25 x 25 mm; For bores ø35~ø50
35 x 35 mm; For bores ø50~
• Three l-shaped
cores;
25 x 25 mm; For
bores ø35~ø50
35 x 35 mm; For
bores ø50~ø80
55 x 55 mm; For
bores ø80~
More than ø20
• l-shaped
core;
15 x 15 mm;
For bores
ø20~ø35
• Temperature
sensor
Standard accessories
• Three l-shaped
cores;
15 x 15 mm;
For bores
ø20~ø35
25x25 mm;
For bores
ø35~ø50
35 x 35 mm;
For bores ø50~
• Temperature
sensor
• Plate for small
bearings
372 (524)
1115
16.0
16.5
• Temperature sensor
• Plate for small bearings
• Two l-shaped cores;
35 x 35 mm; For bores ø35~ø50
55 x 55 mm; For bores ø80~
• Temperature sensor
• Base with wheels
• Box for l-shaped cores
• Temperature
sensor
• Base with
wheels
• Box for l-shaped
cores
• Box for lshaped cores
Notes (1) L’: Bearing rest extended
(2): Not available from stock.
Contact NSK for details.
Remarks 1. Be sure to give the voltage and frequency when placing an order.
2. Consult NSK for voltages other than those listed.
3. CHE01xx Model can use both 50 and 60Hz.
4. Bearings should not be heated higher than 120˚C.
5. Handle the heated product with care.
6
NSK Pullers, Pushers, Straighteners
& Tri-Section Press Plates
Series
Style
in
4
5
0
Type
blank = puller
3 = tri-section press plate
8 = pusher
blank
H
C
L
3
CK
3
Pullers, pushers, straighteners and tri-section press
plates are useful in the quick, easy and safe
installation and removal of bearings, rings, pulleys
and gears. The use of these tools is helpful in
protecting the shaft, bearings and surrounding
equipment from damage. They also help reduce
the potential for bodily harm to the operator.
NSK’s family of pullers, pushers, straighteners
and tri-section press plates come in a full range
of sizes and come individually or in kits
specifically matched to customer needs.
NSK offers a hydraulic pusher, puller
and tri-section press plate in a single heavy
duty case making transportation and storage
more convenient as well as reducing the
possibility of lost parts. Pullers are available
in non-interchangeable standard and high
capacity designs. The high capacity design
includes a high pressure cylinder and cobra jaw.
Hydraulic pullers and pushers from NSK
incorporate course threads which make it easier
and quicker to assemble than competitive
7
pump built in cylinder
straightener
pump separate of cylinder
pusher kit
Special Feature
Base number
bearing removal products.
=
=
=
=
-6
in
HCL
=
=
=
=
=
standard
high capacity cylinder
strong cobra jaw
long jaw
kit with tri-section press plate
∅A = Largest
CK3-_
∅A
Tri-Section
Press Plates
∅B
A/B-0001
C
CK3-_
D
E
SRB
CK3-_
Shaft
G
F
CK3-50
CK3-100
CK3-160
CK3-260
CK3-380
Part
Number
CK3-50
CK3-100
CK3-160
CK3-260
CK3-380
21304
22205
22211
23120
23032
22310
22320
23232
23252
24176
CK3-50
CK3-100
CK3-160
CK3-260
CK3-380
61801
61805
61811
61820
61832
6410
6320
6232
6252
6076
A
B
C
kN
ton
(imp)
Dimensions
D
mm
80
200
300
450
600
8
20
30
45
60
12
26
50
90
140
50
100
160
260
380
20
36
45
70
81
26
45
60
88
112
Capacity
* CB = cardboard, M = metal, PE = plastic enclosure, W = wood box
CK3-50
CK3-100
CK3-160
CK3-260
CK3-380
NN4920
NN4920
NN3020
NNU49323
NN4120
NNU4132
NNU4152
NNU4176
WT
E
F
G
15
25
33
47
63
2
3
4
6
8
4
6
8
11
14
kg
** S = short, L = long
0.5
2.8
6.5
19.5
48.4
† B = PVC bag, M = PVC mesh
8
Puller
CK-8inH
C
15mm
CK-6sd
CK-6in
CK-6inL
CK-6inHC
CK-6inHCL
CK-6in3
CK-6in3H
CK-8in
CK-8inL
CK-8inHC
CK-8inHCL
CK-8in3
CK-8in3H
CK-10in
CK-10inL
CK-10in3
CK-11inHC
CK-11inHCL
CK-11in3H
CK-12inHC
CK-12inHCL
CK-15inHC
CK-25
CK-25C
CK-25CL
CK-105
CK-105L
CK-105HC
CK-105HCL
CK-135HC
CK-135HCL
CK-155HC
CK-104
CK-104A
CK-104B
CK-130
CK8-270
CK8-270A
CK8-270C
CK8-270G
CK8-INP
Reach
Capacity
Jaw**
kN
ton
(imp)
60~65
60~65
60~65
100~105
100~105
60~65
100~105
80~85
80~85
120~125
120~125
80~85
120~125
150~155
150~155
150~155
200~205
200~205
200~205
250~255
250~255
300~305
400~405
400~405
400~405
150~155
150~155
175~180
175~180
225~230
225~230
250~255
150~155
150~155
150~155
6~6.5
6~6.5
6~6.5
10~10.5
10~10.5
6~6.5
10~10.5
8~8.5
8~8.5
12~12.5
12~12.5
8~8.5
12~12.5
15~15.5
15~15.5
15~15.5
20~20.5
20~20.5
20~20.5
25~25.5
25~25.5
30~30.5
40~40.5
40~40.5
40~40.5
15~15.5
15~15.5
17.5~18
17.5~18
22.5~23
22.5~23
25~25.5
15~15.5
15~15.5
15~15.5
80
120
80
120
8
12
8
12
B
Std.
S
Cobra
L
S
L
•
•
Cylinder
(kpsi)
10
12
•
•
CB
•
M
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• (CK3-100)
• (CK3-100)
• (CK3-160)
• (CK3-160)
• (CK3-160)
•
•
•
•
•
•
•
•
•
Tri-Section
Press Plate
M
•
•
•
•
•
•
•
•
•
B
Pusher Puller
•
•
•
•
•
•
•
Safety
Bag†
∅G
•
•
•
•
•
•
•
W
•
•
•
•
•
•
PE
•
•
•
•
Spread
•
•
•
•
•
•
E
Case*
•
•
•
* CB = cardboard, M = metal, PE = plastic enclosure, W = wood box
9
∅F
Spread
∅A
Part
Number
D
F
∅E
∅G
Jaw
D
Reach
CK8-270
CK-_ in
Stroke
Pusher
•
** S = short, L = long
•
•
•
•
•
•
•
•
•
•
•
† B = PVC bag, M = PVC mesh
• (CK3-160)
Puller/Straightener
CK-10in
CK-104A
C
CK-104
Stroke
Reach
B
E
∅G
A
Spread
Reach
CK-10in
CK-104
Reach
CK-104A
CK-10in
Stroke
Jaw
CK-10in
∅G
Spread
CK-10in is sold separately from CK-104A
Reach
Spread
Stroke
A
B
C
11
11
11
11
11
11
11
11
14
11
14
11
11
14
30
14
14
30
14
30
27
27
6
6
10
6
10
6
6
10
10
10
10
10
10
10
28
10
10
28
10
28
36
36
22
22
25
22
25
22
22
25
29
25
29
25
25
29
33
29
29
33
29
33
38
38
32
32
51
32
51
32
32
51
51
51
51
51
51
51
75
51
51
75
51
75
78
78
30
30
14
30
14
30
30
27
27
38
38
10
28
10
28
28
36
36
28
28
29
33
29
33
33
38
38
32
32/60
30
35
17
17
188
193
35
35
90
90
mm
152
152
190
182
220
152
182
190
229
220
259
190
220
229
300
229
259
300
259
300
375
375
30/150
30/200
30/200
280
280
30/200
280
30/250
30/250
305
305
30/250
305
280
280
280
356
356
356
406
406
50/540
405
635
229
300
259
300
300
375
375
150
205
150/205
-55~395
-55~385
-55~385
-55~385
-55~385
800
1200
280
280
356
356
406
406
540
100/410
100/410
100/410
36-130
58-270
58-270
58-270
58-270
55
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
110
110
110
250
250
250
82
82
82
82
110
110
110
82
82
82
82
82
82
82
Dimensions
D
mm
WT
E
F
G
53
83
83
113
113
83
113
83
83
113
113
83
113
83
83
83
113
113
113
140
140
170
165
42
42
42
42
42
42
42
50
50
50
50
50
50
60
60
60
60
60
60
70
70
74
110
25
25
25
25
25
25
25
28
28
25
25
28
25
35
35
35
35
35
35
45
45
55
71
76
76
51
75
51
75
75
78
78
83
83
113
113
140
140
170
60
60
60
60
70
70
74
35
35
35
35
45
45
55
60
230
230
30
58
160
130
kg
60
35
35
5.0
5.5
6.3
6.7
7.6
9.1
9.5
7.3
8.1
9.2
10.7
13.8
15.7
9.3
12.9
15.8
12.0
14.2
18.6
19.3
24.3
32.4
88.7
57.2
72.2
13.8
17.3
16.4
18.6
23.8
28.7
31.6
10.4
9.1
14.6
7.5
12.3
15.4
14.4
30.9
Part
Number
CK-6sd
CK-6in
CK-6inL
CK-6inHC
CK-6inHCL
CK-6in3
CK-6in3H
CK-8in
CK-8inL
CK-8inHC
CK-8inHCL
CK-8in3
CK-8in3H
CK-10in
CK-10inL
CK-10in3
CK-11inHC
CK-11inHCL
CK-11in3H
CK-12inHC
CK-12inHCL
CK-15inHC
CK-25
CK-25C
CK-25CL
CK-105
CK-105L
CK-105HC
CK-105HCL
CK-135HC
CK-135HCL
CK-155HC
CK-104
CK-104A
CK-104B
CK-130
CK8-270
CK8-270A
CK8-270C
CK8-270G
CK8-INP
10
NSK Hydraulic Nuts
Size (bore)
Series
(Examples)
200 = 200 mm (metric thread)
199 = 199 mm (7.8740 inch thread)
180 = 180 mm (metric thread)
179 = 179 mm (7.0866 inch thread)
blank = metric thread
Z = inch thread
B = blank (no thread)
Style
-1 = standard
-2, -3, -4 etc. = variation
on standard
Base number
HMV
199
Z
-1
Hydraulic nuts from NSK utilize an axial drive-up method
to ensure the accurate and quick installation of tapered
Nut
bore bearings. The axial drive-up method ensures that the
internal clearance and interference fit is correct by
monitoring the movement of the piston, and thus the
bearing's inner ring, in relation to the hydraulic nut. This
method minimizes the need to continually check the
clearance reduction with feeler gages.
The benefit of NSK’s patented axial drive-up method is
that it does not require the use of a dial indicator or charts.
Competitive axial drive-up systems require a special dial
indicator and the use of printed charts, which not only add
to cost but can also be difficult to read.
NSK hydraulic nuts are coated with Armoloy, a special
permanent anti-rusting layer, making them much more
durable than other offerings. They also use NPT ports
so replacement fittings are inexpensive and easy to obtain.
Cranking handles come in standard diameter rod sizes so
replacements can be made from standard stock instead
of having to buy specialized sizes as is common with
competitive offerings. Larger sizes are made with
tapped holes for eye bolts for easy lifting.
Hydraulic nuts come complete with jack
out bolts that are very useful in making the
replacement of seals quick and easy. A full
size range is available and all hydraulic
nut kits come in a secure
carrying case.
11
Roll
Journal
Seat
Tapered Bore SRB
NPTF Oil Port
Axial Drive-up Pin
Piston
Patented Design
NSK Hydraulic Nuts
There are three different ways to use Hydraulic Nuts. Below are the three methods. Contact NSK if you have any questions.
Before Mounting
Axial displacement method
1
Cr
Cm
Cb
X
Cb = Bench Clearance
Cm = Mounted Clearance
Cr = Clearance Reduction
Da
Gap
Overhang “X”
Ds = Starting Distance
Da = Min. Axial Displacement
X = Overhang after Installed
Straight edge method
Axial Displacement
Pin and back of
Hydraulic Nut are
flush
Cm
Da
Using Axial Displacement Pin:
Piston is ready to move the bearing by pushing against the inner ring.
Axial displacement method
1
Cb = Cm + Cr
Ds = Da + X
Ds
2
After Mounting
Da = Min. Axial Displacement
Using Axial Displacement Pin:
Piston has moved the bearing the minimum axial displacement.
The Axial Displacement pin is flush with the back of the nut.
2
Straight edge method
Axial Displacement Pin
Wrench
Wrench
Back of Nut
Using Straight Edge:
Placing a straight edge such as a wrench will show a gap.
3
Dial indicator method
Magnetic Base
Dial Indicator
Using Dial Indicator:
Place a dial indicator on the back of the axial displacement pin.
No Gap
Axial Displacement Pin
Using Straight Edge:
The gap has disappeared indicating the bearing has moved
the minimal axial displacement.
3
Dial indicator method
Magnetic Base
Dial Indicator
Using Dial Indicator:
Watch the gage to determine the axial displacement of the bearing.
12
d2
d1
C
Ø 1/4” NPTF
-1
4Z
V7
B1
HM
A
B
O-ring &
Back-up
thread
D
d3
Ø 3/8” NPTF
A-A
Ø 3/8” NPTF Plug
Jack Out Bolt
Bearing Bore Size***
Bore
Symbol
Bore
(mm)
A
ØE
P
COR
Crank Handle
Wrench
Hydraulic Nut p/n
Dimensions
Bore
(inch)
Metric
HMV( )-1
Inch
HMV( )Z-1
Blank
HMV( )B-1
d1
(mm)
d2
(mm)
d3
(mm)
B
(mm)
B1
(mm)
D
(mm)
E
(mm)
C
(mm)
10
11
12
13
50
55
60
65
1.9685
2.1654
2.3622
2.5591
50
55
60
65
49
54
59
64
50
55
60
65
50.5
55.5
60.5
65.5
84
89
95
101
114
120
125
130
38
38
38
38
4
4
5
5
72
76
81
88
12.7
12.7
12.7
12.7
13.0
13.0
13.0
13.0
14
15
16
70
75
80
2.7559
2.9528
3.1496
70
75
80
69
74
79
70
75
80
70.5
75.5
80.5
107
112
117
135
140
146
38
38
38
5
5
5
95
100
106
12.7
12.7
12.7
13.0
13.0
13.0
17
18
19
20
85
90
95
100
3.3465
3.5433
3.7402
3.9370
85
90
95
100
84
89
94
99
85
90
95
100
85.5
90.5
95.5
100.5
122
127
133
138
150
156
162
166
38
38
38
38
5
5
5
6
110
116
122
126
12.7
12.7
12.7
12.7
13.0
13.0
13.0
13.0
21
22
n/a
24
105
110
n/a
120
4.1339
4.3307
n/a
4.7244
105
110
115
120
104
109
n/a
119
105
110
115
120
105.5
110.5
115.5
120.5
143
149
154
159
172
178
182
188
38
38
38
38
6
6
6
6
130
136
141
146
12.7
12.7
12.7
12.7
13.0
13.0
13.0
13.0
n/a
26
n/a
28
n/a
130
n/a
140
n/a
5.1181
n/a
5.5118
125
130
135
140
n/a
129
n/a
139
125
130
135
140
125.5
130.5
135.5
140.5
164
170
175
180
192
198
204
208
38
38
38
38
6
6
6
7
151
156
161
166
12.7
12.7
12.7
19
13.0
13.0
13.0
13.0
n/a
30
n/a
32
n/a
150
n/a
160
n/a
5.9055
n/a
6.2992
145
150
155
160
n/a
149
n/a
159
145
150
155
160
145.5
150.5
155.5
160.5
186
191
198
204
214
220
226
232
39
39
39
40
7
7
7
7
171
176
183
190
19
19
19
19
13.5
13.5
14.0
14.5
n/a
34
36
n/a
170
180
n/a
6.6929
7.0866
165
170
180
n/a
169
179
165
170
180
165.5
170.5
180.5
209
215
227
238
244
256
40
41
41
7
7
7
195
200
212
19
19
19
14.5
15.0
15.5
38
40
190
200
7.4803
7.8740
190
200
189
199
190
200
191
201
239
251
270
282
42
43
8
8
230
241
19
19
16.5
17.0
n/a
n/a
n/a
44
n/a
n/a
n/a
n/a
220
n/a
n/a
n/a
n/a
8.6614
n/a
205
210
215
220
225
n/a
n/a
n/a
219
n/a
205
210
215
220
225
207
212
217
222
227
256
262
267
273
280
288
294
300
306
312
43
44
44
44
45
8
8
8
8
8
247
252
258
263
269
19
19
19
19
19
17.0
17.5
17.5
18.0
18.5
n/a
n/a
48
n/a
n/a
n/a
240
n/a
n/a
n/a
9.4488
n/a
230
235
240
250
n/a
n/a
239
n/a
230
235
240
250
232
237
242
252
285
291
296
307
318
326
330
342
45
46
46
46
8
8
9
9
274
281
285
296
19
19
19
19
18.5
19.0
19.0
19.5
52
n/a
56
260
n/a
280
10.2362
n/a
11.0236
260
270
280
258
n/a
279
260
270
280
262
272
282
319
330
341
356
368
380
47
48
49
9
9
9
308
319
330
19
19
19
20.0
20.5
21.0
n/a
60
n/a
n/a
300
n/a
n/a
11.8110
n/a
290
300
310
n/a
299
n/a
290
300
310
292
302
312
353
364
375
390
404
416
49
51
52
9
10
10
340
352
363
19
19
19
21.5
22.0
22.6
* Inch threads for HMV49Z-1 to HMV328Z-1 are American National Form Class 3. Inch threads for HMV338Z-1 to HMV950Z-1 are ACME General Purpose Class 3 G.
** Metric threads for HMV49-1 to HMV200-1 are ISO 965/111-1980 tolerance class 6H. Metric threads for HMV205-1 to HMV1000-1 are ISO 2901-1977 tolerance class 7H.
13
ØE
Jack Out Bolt
NPTF Plug
Wrench
1
**If a seal needs replacing, the use of NSK's
jack out bolts make the task quick and easy.
-1
4Z
V7
HM
2
3
CORP
Properties
piston
stroke
piston area
(cm2)
mass
(kg)
Metric
Thread
**
Inch Threads*
5
5
5
5
29
31
33
36
2.70
2.75
2.80
3.00
M50x1.5
M55x2
M60x2
M65x2
1.967
2.157
2.360
2.548
18
18
18
18
0.45
0.55
5
5
5
38
40
42
3.20
3.40
3.70
M70x2
M75x2
M80x2
2.751
2.933
3.137
18
12
12
0.60
0.70
5
5
5
5
45
47
49
51
3.75
4.00
4.30
4.40
M85x2
M90x2
M95x2
M100x2
3.340
3.527
3.730
3.918
12
12
12
12
0.70
0.85
1.75
2.15
5
5
5
5
53
56
58
60
4.65
4.95
5.00
5.25
M105x2
M110x2
M115x2
M120x2
4.122
4.325
n/a
4.716
12
12
n/a
12
0.75
0.90
1.90
2.25
5
5
5
5
62
64
66
68
5.25
5.65
5.65
6.00
M125x2
M130x2
M135x2
M140x2
n/a
5.106
n/a
5.497
n/a
12
n/a
12
0.90
1.10
2.25
2.75
5
5
5
6
73
75
81
86
6.50
6.60
6.95
7.60
M145x2
M150x2
M155x3
M160x3
n/a
5.888
n/a
6.284
n/a
12
n/a
8
1.00
1.30
2.50
3.25
6
6
6
89
94
103
7.90
8.40
9.15
M165x3
M170x3
M180x3
n/a
6.659
7.066
n/a
8
8
1.10
1.40
2.75
3.50
7
8
115
125
10.5
11.5
M190x3
M200x3
7.472
7.847
8
8
1.30
1.60
3.25
4.00
8
9
9
9
9
128
134
137
144
152
12.0
12.5
13.0
13.5
14.5
Tr205x4
Tr210x4
Tr215x4
Tr220x4
Tr225x4
n/a
n/a
n/a
8.628
n/a
n/a
n/a
n/a
8
n/a
1.40
1.70
3.50
4.25
9
10
10
10
155
162
165
176
15.5
16.0
16.0
17.5
Tr230x4
Tr235x4
Tr240x4
Tr250x4
n/a
n/a
9.442
n/a
n/a
n/a
6
n/a
1.60
1.90
4.00
4.75
11
12
12
188
199
211
19.0
20.5
22.0
Tr260x4
Tr270x4
Tr280x4
10.192
n/a
11.004
6
n/a
6
1.70
2.20
4.25
5.50
13
14
14
224
236
250
22.5
25.5
27.0
Tr250x4
Tr300x4
Tr310x4
n/a
11.785
n/a
n/a
6
n/a
1.90
2.40
4.75
6.00
Nominal
Diameter
Threads per
inch
1:12 (mm) axial
displacement
min.
max.
1:30 (mm) axial
displacement
min.
max.
*** Mounting directly on a tapered shaft or an adapter sleeve. For inch sizes, if mounting on a removal sleeve, choose next smallest inch size hydraulic nut. For metric sizes,
if mounting on a removal sleeve, choose next smallest metric size.
n/a = ISO bearing and standard inch hydraulic nut size does not exist for mounting directly on a shaft or on an adapter sleeve. Consult NSK for a non-standard sizes.
14
d2
d1
C
Ø 1/4” NPTF
HM
A
-1
4Z
V7
B1
B
O-ring &
Back-up
thread
D
d3
Ø 3/8” NPTF
A-A
Ø 3/8” NPTF Plug
Jack Out Bolt
Bearing Bore Size***
Bore
Symbol
Bore
(mm)
A
ØE
P
COR
Crank Handle
Wrench
Hydraulic Nut p/n
Dimensions
Bore
(inch)
Metric
HMV( )-1
Inch
HMV( )Z-1
Blank
HMV( )B-1
d1
(mm)
d2
(mm)
d3
(mm)
B
(mm)
B1
(mm)
D
(mm)
E
(mm)
C
(mm)
64
n/a
68
n/a
n/a
320
n/a
340
n/a
n/a
12.5984
n/a
13.3858
n/a
n/a
320
330
340
345
350
319
n/a
338
n/a
n/a
320
330
340
345
350
322
332
342
347
352
387
397
408
414
420
428
438
450
456
464
53
53
54
54
56
10
10
10
10
10
374
384
395
401
407
19
19
19
19
19
23.0
23.0
23.5
24.0
24.0
72
n/a
n/a
76
n/a
80
360
n/a
n/a
380
n/a
400
14.1732
n/a
n/a
14.9606
n/a
15.7480
360
365
370
380
385
400
359
n/a
n/a
379
n/a
399
360
365
370
380
385
400
362
367
372
382
387
402
431
436
442
452
459
475
472
482
486
498
504
522
56
57
57
58
58
60
10
11
11
11
11
11
416
424
428
439
445
461
19
19
19
25.4
25.4
25.4
24.5
24.5
25.0
25.0
25.5
26.0
n/a
84
n/a
88
n/a
n/a
420
n/a
440
n/a
n/a
16.5354
n/a
17.3228
n/a
410
420
430
440
450
n/a
419
n/a
439
n/a
410
420
430
440
450
412
422
432
442
452
486
498
508
519
530
534
546
558
566
580
61
61
62
62
64
11
11
11
12
12
472
483
494
503
515
25.4
25.4
25.4
25.4
25.4
26.5
27.0
27.0
27.5
28.0
92
n/a
96
n/a
/500
460
n/a
480
n/a
500
18.1102
n/a
18.8976
n/a
19.6850
460
470
480
490
500
459
n/a
479
n/a
499
460
470
480
490
500
462
472
482
492
502
541
552
563
573
585
590
602
612
624
636
64
65
65
66
67
12
12
12
12
12
525
536
546
557
568
25.4
25.4
25.4
25.4
25.4
28.0
28.5
29.0
29.0
29.5
n/a
n/a
/530
n/a
n/a
/560
n/a
n/a
530
n/a
n/a
560
n/a
n/a
20.8661
n/a
n/a
22.0472
510
520
530
540
550
560
n/a
n/a
530
n/a
n/a
560
510
520
530
540
550
560
512
522
532
542
552
562
596
606
617
629
639
650
648
658
670
682
693
704
68
68
69
69
70
71
12
13
13
13
13
13
579
589
600
611
622
632
25.4
25.4
25.4
25.4
25.4
25.4
30.0
30.0
30.5
31.0
31.0
31.5
n/a
n/a
/600
/630
n/a
n/a
600
630
n/a
n/a
23.6220
24.8031
570
580
600
630
n/a
n/a
600
630
570
580
600
630
572
582
602
632
661
671
693
726
716
726
748
782
72
72
73
74
13
13
13
14
643
653
674
706
25.4
25.4
25.4
25.4
32.0
32.0
32.5
33.5
n/a
/670
n/a
/710
n/a
670
n/a
710
n/a
26.3780
n/a
27.9528
650
670
690
710
n/a
670
n/a
710
650
670
690
710
652
672
692
712
757
796
818
840
804
826
848
870
75
76
77
78
14
14
14
15
727
748
769
790
25.4
25.4
25.4
25.4
33.5
33.5
34.2
34.7
/750
/800
750
800
29.5276
31.4961
750
800
750
800
750
800
752
802
883
936
912
965
79
80
15
16
831
883
25.4
25.4
35.8
36.8
/850
/900
850
900
33.4646
35.4331
850
900
850
900
850
900
852
902
990
1043
1020
1075
83
86
16
17
935
988
25.4
25.4
38.3
39.4
/950
/1000
950
1000
37.4016
39.3701
950
1000
950
n/a
950
1000
952
1002
1097
1150
1126
1180
86
88
17
17
1038
1090
25.4
25.4
40.9
41.9
* Inch threads for HMV49Z-1 to HMV328Z-1 are American National Form Class 3. Inch threads for HMV338Z-1 to HMV950Z-1 are ACME General Purpose Class 3 G.
** Metric threads for HMV49-1 to HMV200-1 are ISO 965/111-1980 tolerance class 6H. Metric threads for HMV205-1 to HMV1000-1 are ISO 2901-1977 tolerance class 7H.
15
ØE
Jack Out Bolt
NPTF Plug
Wrench
1
**If a seal needs replacing, the use of NSK's
jack out bolts make the task quick and easy.
-1
4Z
V7
HM
2
3
CORP
Properties
Inch Threads*
1:12 (mm) axial
displacement
min.
max.
1:30 (mm) axial
displacement
min.
max.
piston area
(cm2)
mass
(kg)
Metric
Thread
**
14
14
14
14
14
263
270
284
294
299
29.5
30.0
31.5
32.5
35.0
Tr320x5
Tr330x5
Tr340x5
Tr345x5
Tr350x5
12.562
n/a
13.339
n/a
n/a
6
n/a
5
n/a
n/a
2.20
2.70
5.50
6.75
15
15
16
16
16
17
313
317
328
335
347
367
35.5
38.5
39.0
40.5
41.0
45.5
Tr360x5
Tr365x5
Tr370x5
Tr380x5
Tr385x5
Tr400x5
14.170
n/a
n/a
14.957
n/a
15.745
5
n/a
n/a
5
n/a
5
2.40
3.00
6.00
7.50
17
17
17
17
17
383
400
408
425
442
48.0
50.0
52.5
54.0
57.5
Tr410x5
Tr420x5
Tr430x5
Tr440x5
Tr450x5
n/a
16.532
n/a
17.319
n/a
n/a
5
n/a
5
n/a
2.70
3.30
6.75
8.25
17
18
19
19
19
451
469
487
496
515
60
62
63
66
70
Tr460x5
Tr470x5
Tr480x5
Tr490x5
Tr500x5
18.107
n/a
18.894
n/a
19.682
5
n/a
5
n/a
5
3.00
3.70
7.50
9.25
20
20
21
21
21
22
533
543
562
582
592
612
74
75
79
81
84
88
Tr510x6
Tr520x6
Tr530x6
Tr540x6
Tr550x6
Tr560x6
n/a
n/a
20.867
n/a
n/a
22.048
n/a
n/a
4
n/a
n/a
4
3.40
4.30
8.50
11.00
23
23
23
23
632
642
674
729
91
94
100
110
Tr570x6
Tr580x6
Tr600x6
Tr630x6
n/a
n/a
23.623
24.804
n/a
n/a
4
4
3.70
4.80
9.25
12.00
23
24
25
25
761
802
842
878
115
120
127
135
Tr650x6
Tr670x6
Tr690x6
Tr710x7
n/a
26.379
n/a
27.961
n/a
4
n/a
3
4.20
5.30
10.50
13.00
25
25
953
1040
146
161
Tr750x7
Tr800x7
29.536
31.504
3
3
4.50
5.90
11.50
15.00
26
30
1145
1242
181
205
Tr850x7
Tr900x7
33.473
35.441
3
3
5.00
6.60
12.50
16.50
30
34
1357
1459
218
239
Tr950x8
Tr1000x8
37.410
n/a
3
n/a
5.50
7.40
14.00
18.50
piston
stroke
Nominal
Diameter
Threads per
inch
*** Mounting directly on a tapered shaft or an adapter sleeve. For inch sizes, if mounting on a removal sleeve, choose next smallest inch size hydraulic nut. For metric sizes,
if mounting on a removal sleeve, choose next smallest metric size.
n/a = ISO bearing and standard inch hydraulic nut size does not exist for mounting directly on a shaft or on an adapter sleeve. Consult NSK for a non-standard sizes.
16
Hydraulic Pump
Type
HSS
HDS
ELE
AIR
=
=
=
=
Hydraulic Singe Stage
Hydraulic Double Stage
Electric Powered Pump
Air Powered Pump
Tank Capacity
Base number
SMALL
LARGE
PUMP
HSS
SMALL
Quick Disconnect
Coupler
Hose
Extra Oil
Pump
Tee
Dial Indicator
Gauge
NSK offers hydraulic pumps that
inject oil into hydraulic nuts during
bearing installation and simplify
the bearing removal process by
pumping oil between the inner
ring and journal. NSK heavy duty
pumps are offered in two sizes, are
lightweight and come in a specially
designed protective carrying case.
NSK
P/N**
Pump
Description
Usable
Max.
Oil
Working
Pressure* Capacity
psi
inch3
Oil Displacement
Per Stroke
inch3
1st stage
Max. Piston Oil Outlet
Weight
Handle Stroke
Port
Effort
Pump Dimensions
inch (mm)
2nd stage
lbs
inch
NPTF
lbs
L
W
H
PUMP HSS
LARGE
Hand Pump
Single Speed
10,000
48
0.15
24.4
0.98
3/8"-18
16.50
22.05
(560)
5.51
(140)
5.51
(140)
PUMP HSS
SMALL
Hand Pump
Single Speed
10,000
30.15
0.18
24.4
0.98
3/8"-18
13.44
15.16
(385)
5.51
(140)
5.32
(135)
* All pumps include a relief valve set at 10,000 psi.
** All pumps come in kits which include a pump, hose, quick disconnect, coupler (nipple), gauge, tee, extra oil and a metal case.
17
Spanner Wrench
Size
Base number
HN
Numbered 1 to 22 according to
AN locknuts part number
1
Size
23-30 = fits AN 23-30 locknuts
30-40 = fits AN 30-40 locknuts
40-52 = fits AN 40-52 locknuts
Base number
HN IMPACT
INCH
NSK
SKF
STANDARD
SPANNER
WRENCH
P/N
N 01
N 02
N 03
N 04
N 05
N 06
N 07
N 08
N 09
N 10
N 11
N 12
N 13
N 14
AN 15
AN 16
AN 17
AN 18
AN 19
AN 20
AN 21
AN 22
AN 02
AN 03
AN 04
AN 05
AN 06
AN 07
AN 08
AN 09
AN 10
AN 11
AN 12
AN 13
AN 14
AN 15
AN 16
AN 17
AN 18
AN 19
AN 20
AN 21
AN 22
KM 1
KM 2
KM 3
KM 4
KM 5
KM 6
KM 7
KM 8
KM 9
KM 10
KM 11
KM 12
KM 13
KM 14
KM 15
KM 16
KM 17
KM 18
KM 19
KM 20
KM 21
KM 22
HN 1
HN 2
HN 3
HN 4
HN 5
HN 6
HN 7
HN 8
HN 9
HN 10
HN 11
HN 12
HN 13
HN 14
HN 15
HN 16
HN 17
HN 18
HN 19
HN 20
HN 21
HN 22*
LOCKNUT P/N
23-30
Spanner wrenches are a simple and inexpensive means
of installing small size tapered bore bearings onto shafts
and adapter sleeves. Because they clamp onto the slot in
a locknut, they do not cause damage to the locknut which
frequently occurs when using a hammer and keystock.
NSK standard spanner wrenches are made from 1/4”
(7mm) thick plates. The heads of impact spanner wrenches
are made of forged steel, which is welded to a strong
alloyed steel handle covered by easy grip rubber.
NSK impact-spanner wrenches are heavy duty and can
withstand the impact force of a hammer. All wrenches come
with a convenient hole for ease of storage or hanging.
METRIC
* The largest standard spanner wrench is HN 22.
LOCKNUT P/N**
LOCKNUT SERIES
KM
HM..T
HML..T
HM30
HM31
AN-00
N-000
NSK IMPACT
SPANNER
WRENCH P/N
LOCKNUT NUMBER
23-30
30-40
40-52
*
*
41-50
*
41-42
41-54
*
*
44-52
*
*
*
24-30
30-40
40-44
026-032
034-040
044-052
HN IMPACT 23-30
HN IMPACT 30-40
HN IMPACT 40-52
* Locknut of that size does not exist in this series.
**All Locknut Series have letter and number part numbers (i.e. AN-24).
18
Worldwide Sales Offices
NSK Ltd.-Headquarters, Tokyo, Japan
www.nsk.com
Americas & Europe Department
tel: 03-3779-7120
Asia Marketing & Sales Department
tel: 03-3779-7121
Africa
South Africa:
NSK South Africa (Pty) Ltd.
Johannesburg
tel: (011) 458 3600
Asia and Oceania
Australia:
www.nskaustralia.com.au
NSK Australia Pty. Ltd.
Melbourne
tel: (03) 9764-8302
China:
NSK Hong Kong Ltd.
Hong Kong
tel: 2739-9933
Kunshan NSK Co., Ltd.
tel: 0520-7305654
Kunshan
Guizhou HS NSK Bearings Co., Ltd.
tel: 0853-3521505
Anshun
NSK (Shanghai) Trading Co., Ltd.
Shanghai
tel: 021-62099051
NSK representative office
tel: 010-6590-8161
Beijing
NSK representative office
Shanghai
tel: 21-6209-9051
NSK representative office
tel: 020-8732-0583
Guangzhou
NSK representative office
tel: 0853-3522522
Anshun
India:
Rane NASTECH Ltd.
Chennai
tel: 04114-65313, 65314, 65365, 66002
NSK representative office
Chennai
tel: 044-4334732
Indonesia:
P.T. NSK Bearings Manufacturing Indonesia
Jakarta
tel: 021-898-0155
Korea:
NSK Korea Co., Ltd.
Seoul
tel: 02-3287-0300
NSK Korea Co., Ltd., Changwon Plant
tel: 0551-287-6001
Changwon
Malaysia:
NSK Bearings (Malaysia) Sdn. Bhd.
tel: 03-7958-4396
Kuala Lumpur
NSK Micro Precision (M) Sdn. Bhd.
tel: 03-961-6288
Kuala Lumpur
New Zealand:
www.nsk-rhp.co.nz
NSK New Zealand Ltd.
tel: (09) 276-4992
Auckland
Philippines:
NSK representative office
Manila
tel: 02-759-6246
Singapore:
NSK International (Singapore) Pte Ltd.
Singapore
tel: (65) 273 0357
NSK Singapore (Pte) Ltd.
Singapore
tel: (65) 278 1711
Taiwan:
Taiwan NSK Precision Co., Ltd.
Taipei
tel: 02-2591-0656
Thailand:
NSK Bearings (Thailand) Co., Ltd.
Bangkok
tel: 02-6412150~58
NSK Safety Technology (Thailand) Co., Ltd.
tel: (038) 214-317-8
Chonburi
Siam NASTECH Co., Ltd.
tel: (038) 522-343~350
Chachoengsao
Europe
NSK Europe Ltd.
(European Headquarters)
www.eu.nsk.com
Maidenhead, England
tel: 0162-850-9800
France:
NSK France S.A.
Paris
tel: 01 30 57 39 39
Germany:
NSK Deutschland Gmbh
Düsseldorf
tel: 02102-481-0
NSK Steering Systems Europe Ltd.
Stuttgart
tel: 0771-79082-277
Neuweg Fertigung Gmbh
Munderkingen
tel: 07393-540
Italy:
NSK Italia S.P.A.
Milano
tel: 02-995-191
Poland:
NSK Europe Ltd. Warsaw Liaison Office
tel: 48-22-645-1525, 1526
Warsaw
NSK Iskra S.A.
tel: 48-41-366-6111
Kielce
Spain:
NSK Spain S.A.
Barcelona
tel: 93-575-4041
Switzerland:
Waelzlager Industriewerke Bulle AG (W.I.B.)
Bulle
tel: 026-9191100
Turkey:
NSK Bearings Middle East Trading Co., Ltd.
Istanbul
tel: 90-216-442-7106
United Kingdom:
NSK Bearings Europe Ltd.
tel: 0191-586-6111
Peterlee, England
NSK European Technology Co., Ltd.
Ruddington, England
tel: 0115-940-5409
NSK UK Ltd.
tel: 0163-660-5123
Newark, England
NSK Steering Systems Europe Ltd.
Coventry, England
tel: 024-76-588588
North and South America
NSK Americas, Inc. (American Headquarters)
tel: 734-913-7500
Ann Arbor, Michigan, U.S.A.
Argentina:
NSK Argentina SRL
Buenos Aires
tel: 011-4762-6556
Brazil:
www.br.nsk.com
NSK Brasil Ltda.
São Paulo
tel: 011-3269-4700
Canada:
www.ca.nsk.com
NSK Canada Inc.
Toronto
tel: 905-890-0740
Mexico:
NSK Rodamientos Mexicana, S.A. de C.V.
Mexico City
tel: 5-301-2741
United States of America:
www.us.nsk.com
NSK Corporation
tel: 734-913-7500
Ann Arbor, Michigan
Sales Offices:
Ann Arbor, Michigan
tel: 734-913-7500
Cerritos, California
tel: 562-926-2975
NSK American Technical Center
tel: 734-913-7500
Ann Arbor, Michigan
NSK Precision America, Inc.
Addison, Illinois
tel: 630-620-8500
NASTECH
Bennington, Vermont
tel: 802-442-5448
www.la.nsk.com
NSK Latin America Inc.
Miami, Florida
tel: (305) 477-0605
NSK Ltd. has a basic policy not to export any products or technology designated as controlled items by export-related laws. When exporting the products in this brochure, the
laws of the exporting country must be observed. Specifications are subject to change without notice and without any obligation on the part of the manufacturer. Every care has
been taken to ensure the accuracy of the data contained in this brochure, but no liability can be accepted for any loss or damage suffered through errors or omissions. We will
gratefully acknowledge any additions or corrections.
Bearing maintenance tools 2005 Printed in Canada ©NSK 2005. The contents of this publication are the copyright of the publishers.