Small Lab Equipment

15. Small Lab Equipment
•
•
•
•
•
Thermomixers
Photodocumentation
UV Transilluminators
Power Supplies
ELISA Reader
15
Small Lab Equipment
Thermomixers
Dry Bath
EuroClone Dry Bath is a microprocessor-controlled product using
advanced thermoelectric technique. This technique allows more stable
and accurate temperature control both in the reaction block and in
the sample. Optional aluminium blocks are easily replaceable, to
hold different types of test tubes. Dry Bath allows to operate also in
programmable mode, linking a maximum of five different temperature
steps.
Features
User friendly LCD display.
Simultaneous display of set and real time and temperature.
Versatile and easy to use, meets all experimental requirements. Easy to clean and sanitise.
Customized blocks are available on request to suit specific demands.
Reliable design with internal extra temperature protection.
Temperature deflection adjusting meets all demands.
Microprocessor-controlled incubation time and temperature.
End of cycle beep-signal.
Technical Specifications
Temperature Range
Timer
Temperature Accuracy
Display Accuracy
Heating rate
Cooling rate (*)
Heating and cooling elements
Dimensions (W x D x H)
Weight (with block)
Power Supply
Available blocks
- 10° C ~ 100° C
1 min ~ 99 h 59 min
< ± 0.3° C
0.1° C
< 20 min (from 20° C to 100° C)
< 30 min (from 20° C to - 10° C)
Peltier modules
300 x 220 x 170 mm
5 Kg
230 V 50 Hz
See “EC Block” table
Cat. n°
EMK20
Description
EuroClone Dry Bath - Digital Dry Bath range T - 10 to 100° C - EC block
for tubes not included
(*) The instruments reach - 10° C if T ambient is < than 25° C
T-Shaker Thermomixers
Designed for simultaneous heating and mixing of small samples,
T-Shakers are supplied with interchangeable platforms for microtubes.
Mixing and heating modes can be used both simultaneously and
independently, i.e. the device can work as a shaker and as a thermostat.
EMC100 Model controls temperature below ambient, reaching the
value of 0° C.EMC100 Model allows to operate also in programmable
mode, linking a maximum of five different temperature steps.
Features
LCD display. Easy to setup and use.
Accurately controls and displays time, temperature and speed.
Over heating protection device ensures safety & reliability.
Temperature can be calibrated to meet user needs.
Silent operation, even below 1.500 rpm.
Custom blocks are available to satisfy experimental requirements.
Gentle, reliable mixing with long-life direct current motor.
Cat. n°.
EMSC100
EMS100
Description
EuroClone T-Shaker Cool - Thermoshaker range T 0 - 100° C - EC
block for tubes not included
EuroClone T-Shaker Ambient - Thermoshaker range T RT + 5 - 100° C EC block for tubes not included
Technical Specifications
Temperature Range
Timer
Temperature Accuracy
Display Accuracy
Mixing speed
Amplitude
Heating rate
Cooling rate (*)
Heating and cooling elements
Dimensions (W x D x H)
Weight (with block)
Power Supply
Available blocks
EMS100
Ambient + 5° C ~ 100° C
1 min ~ 99 h 59 min
< ± 0.5° C
0.1° C
200 - 1500 rpm
2 mm
< 15min (from 20° C to 100° C)
300 x 220 x 170 mm
7 Kg
230 V 50 Hz
See “EC Block” table
(*) If T ambient is < 20° C; 4° C ~ 100° C if T ambient is < 25° C; 10° C ~ 100° C if T ambient is < 30° C
124
EMSC100
0° C ~ 100° C (*)
1 min ~ 99 h 59 min
< ± 0.5° C
0.1° C
200 - 1500 rpm
2 mm
< 15min (from 20° C to 100° C)
< 30 min from T amb. to (T amb. - 20° C)
Peltier modules
300 x 220 x 170 mm
8.5 Kg
230 V 50 Hz
See “EC Block” table
Small Lab Equipment
15
Photodocumentation
GellyDoc Imaging Systems
GellyDoc is a compact and economic system for basic gel documentation.
Images of the gel can be seen through the color LCD screen, pictures
are captured with the high resolution digital camera and saved into
the memory card or instantly printed on the laboratory quality photo
printer included with the system. The camera can be connected to a PC
with a USB cable (not included) for transferring images.
Technical Data
DigiCam 60
LCD Screen:
Darkroom
Emission Filters
Transilluminator
Color Printer
Combination Lock
Dimensions
Color digital camera 10.0 megapixel
SD memory card (16 MB minimum)
Power cord included (batteries not required)
5.6” TFT LCD Monitor with video color
High resolution screen
Mounted on the GellyDoc hood
Connected to the camera for preview of images
UV blocking viewer window
Lightweight and compact
Handles for easy transport of the hood
Fits on top of the transilluminator
EtBr Red 570-640nm
The system is designed for use UV Transilluminators with
filter sizes not bigger than 21 x 26 cm
M-20V and M-26V feature variable intensity settings
300 x 300 resolution
4x6 in. prints
USB connectivity
108 prints included
Dimensions 7 x 5 x 2.5 in. (178 x 127 x 64 mm)
3 digit resettable combination
2 ft. cable
17H x 13.25W x 9.5D in. (432 x 337 x 241mm)
Features
DigiCam 60 color camera with 10.0 megapixel resolution
Lightweight, compact hood provides a compact darkroom environment, hood
now includes a new UV blocking viewer window that allows the visualization of
the gel
LCD screen included
Benchtop UV Transilluminator delivers back-lit UV; select from several benchtop
models (dimension equal or lager than 34 x 24 cm)
Color printer generates instant 4" x 6" low cost, laboratory quality color prints
Ethidium bromide filter for fluorescent stained gels included
Combination lock secures the camera to the darkroom
Cat.
EMF010001
EMF010005
Description
GellyDoc
GellyDoc + UV Transilluminator (Cod EM-TCX-26M)
125
15
Small Lab Equipment
UV Transilluminators
EuroClone has a wide range of UV trasilluminators available either with 8 or 15 Watt lamps with different dimensions even with double wave lenght.
Features
• Long life UV filters: the filters are design to transmit specific
ultraviolet rays and to absorb most of the visible light produced by
the UV tubes. They provide the maximum UV transmission over their
surface. They have an unlimited life expectancy
• Ondulex® high efficiency reflector. Ondulex® is a special polished
reflector which provides supreme UV output. The reflector is located
behind the UV tubes to reflect the maximum of the light to the
outside. The UV intensity of the whole instrument is dramatically
increased, as well as its performance
• Protection Transparent Screen
Compact Transilluminators
These transilluminators combine compact footprint and economy for
laboratories with budget in mind.
The fully adjustable UV safety screen can be positioned to suit the
operator’s viewing angle against exposure to harmful UV rays.
The transilluminators are electronically controlled.
This reduces the heat and eliminates the flickering effect for
gel-documentation.
Features
Electronic ballast / Microprocessor controlled
No flickering effect thanks to its 25 KHz high frequency
The same model can be used from 100 to 240 Volt and from 50 to 60 Hz without
any intervention
Reduced electrical consumption
Unlimited filter life expectancy for 312 and 365 nm
Dual intensity selector (100%-70%)
Ondulex® reflector
High UV output
Adjustable UV safety screen
Stainless steel frame
Cat.
EM-TCX-15M
EM-TCX-20M
EM-TCX-26M
Description
Compact 15 ,312
Compact 20, 312
Compact 26, 312
Dimensions
15 x 15 cm
20 x 20 cm
21 x 26 cm
Tubes
6 x 8 Watt
6 x 8 Watt
6 x 8 Watt
Photo UV Transilluminators
Photo UV are 15 Watt transilluminators characterized by supreme light
stability. With these transilluminators gel visualization and gel
documentation is strongly improved.
The transilluminator heat is considerably reduced, avoiding the use of extra
cooling fan and thus reducing the noise.
Thanks to its very high UV output, the transilluminator provides more signal
compared to a standard 8-watt transilluminator.
Features
High UV output
Electronic ballast / Microprocessor controlled
No flickering effect thanks to its 25 KHz high frequency
Unnecessary cooling due to the electronic control
Weight reduction
The same model can be used from 100 to 240 Volt and from 50 to 60 Hz without
any intervention
Reduced electrical consumption
Unlimited filter life expectancy for 312 and 365 nm
Ondulex® reflector
Adjustable UV safety screen
Stainless steel frame
Cat.
EM-TFX20M
EM-TFX35M
Description
Photo UV 20, 312
Photo UV 35, 312
Dimensions
20 x 20 cm
20 x 35 cm
Tubes
6 x 15 Watt
6 x 15 Watt
If you need a particular model, variable wave lenght, particular dimension, 254 or 365 nm filters or more details please contact our Customer Support (TSA) e-mail: [email protected]
126
Small Lab Equipment
15
Power Supplies
Mini Pro 300V Power Supply
Combining small size and versatility, the newly redesigned Mini Pro 300V
power supply is an ideai choice for any researcher. Capable of providing
constant voltage or constant current in 1V or 1 mA steps, the unit is
perfectly suited to run both vertical polyacrylamide or horizontal agarose
gel electrophoresis experiments. Continuous or timed operation are easily
performed using the simple and user-friendly interface. The Mini Pro 300V
features 2 electrode pairs, allowing for 2 gels to be run simultaneously,
saving both time and valuable bench space. With a universal voltage rating,
the Mini Pro 300V is also designed and constructed to the most rigorous
safety standards. Packages including single or dual horizontal electrophoresis
systems and mini vertical electrophoresis systems are excellent choices for
educational or personal use.
Features
New housing and exterior design
Constant voltage or constant current operation
1V step voltage selection; lmA step current selection
400mA maximum current
60W maximum power
Two pairs of outlet terminals
Timer with alarm function
Safety device
Compact size and lightweight
Competitive pricing choice
Packages with midi sized horizontal electrophoresis systems and vertical
electrophoresis systems
Cat.
EMMINI300
Description
Mini Pro 300V Power Supply
MP 300V Power Supply
MP 300V Power Supply is a microprocessor-controlled Power Supply
with full control range of designated current and/or voltage. Its
maximum voltage output is up to 300 V and is designed to meet
most electrophoresis needs in a personal, single, easy to use unit.
MP 300V Power Supply is capable of running horizontal and vertical
electrophoresis, and two-dimensional electrophoresis, SDS-PAGE
applications. In addition, a timer with alarm function is also equipped
in the unit, and so it is pause function.
Furthermore, the powerful specifications plus four pairs of terminators
could be used for multi electrophoresis units simultaneously. The design
of stackability is another feature to save bench top space.
MP300V Power Supply also provides Constant Voltage or Constant
Current to instruments used in electrophoresis.
Four (4) pairs of terminators and the much powerful specification
equipped enable the maximum capability of MP 300V Power Supply
series compared to other existing similar products on the market.
Features
Output Voltage/Inc
Output Current/Inc
Max. Watt
Operating Constants
Control
Terminator Pairs
Timer
Safety Device
Crossover
Operating Temperature
Unit Dimension
Construction
Weight
Rated Voltages
Cat.
EMMP300V
2-300 V/1 V
1-700 mA/1 mA
150 W
Voltage or Current
Microprocessor Controller
4 pairs
1-999 mins with alarm, continuous
No load detect, leakage detect, overload
detect, load change dectect, over temperature
protection, shrouded plugs and sockets
Yes
Ambient to 40 °C
W 190 x L 275 x H 95 mm
ABS faceplate and aluminum
2.5 kg
100-240 V
Description
MP 300V Power Supply
127
15
Small Lab Equipment
MP 500V Power Supply
MP 500V Power Supply is a microprocessor-controlled Power Supply for
most electrophoresis needs. MP 500V is a programmable mode, and it
is capable of running horizontal and vertical electrophoresis, SDS-PAGE,
native PAGE applications, two-dimensional electrophoresis, and electroblotting. Furthermore, the powerful specifications plus four pairs of
terminators can be used for multi electrophoresis units simultaneously.
In addition, a timer with alarm function is equipped in the unit, and so
is pause function. MP 500V Power Supply provides Constant Voltage
or Constant Current or Constant Power used in electrophoresis. 2.6”
LCD shows the running/setting condition and also provides a user
friendly interface and convenience to the user. Advanced safety design
concerns are outstanding features of MP 500V Power Supply.
Features
Output Voltage/Inc
Output Current/Inc
Output Watt/Inc
Operating Constants
Control Microprocessor
Program Storage
Program Multi-Step
Terminator Pairs
LCD Display
Timer
Crossover
Operating Temperature
Unit Dimension
Construction
Weight
Rate Voltages
5-500 V/1 V
600 mA /1 mA
300 W/1 W
Voltage or Current or Power
Controller
30 programmed files
Up to 6 steps
4 pairs
2.6’’
1-999 mins with alarm, continuous
No load detect, leakage detect, overload detect, load
change detect, over voltage detect, over temperature
protection, shrouded plugs and sockets
Yes
Ambient to 40 °C
W 190 x L 275 x H 95 mm
ABS faceplate and aluminum
2.5 kg
100-240 V
Cat.
EMMP500V
Description
MP 500V Power Supply
Safety Device
MP 3AP Power Supply
MP 3AP Power Supply is considered as one of the most powerful Power Suppy
on the market. It is a microprocessor- controlled Power Supply that can be
used for most electrophoresis needs. MP 3AP is also a programmable mode,
and it is capable of running horizontal and vertical electrophoresis, SDS-PAGE,
native PAGE applications, two-dimensional electrophoresis, and electro-blotting.
Furthermore, the powerful specifications plus four pairs of terminator can be
used for multi electrophoresis units simultaneously. In addition, a timer with
alarm function is equipped in the unit, and so is pause function. MP 3AP Power
Supply provides Constant Voltage or Constant Current or Constant Power used
in electrophoresis. 2.6” LCD shows the running/setting condition and also
provides a user friendly interface and convenience to the user. Advanced safety
design concerns are outstanding features of MP 3AP.
Features
Output Voltage/Inc
Output Current/Inc
Output Watt/Inc
Operating Constants
Control
Program Storage
Program Multi-Step
Terminator Pairs
LCD Display
Timer
Safety Device
Crossover
Operating Temperature
Unit Dimension
Construction
Weight
Rate Voltages
Cat.
EMMP3AP
128
5-300 V/1 V
10-3000 mA/1 mA
300 W/ 1W
Voltage/current/power
Microprocessor Controller
30 programmed files
Up to 6 steps
4 pairs
2.6’’
1-999 mins with alarm, continuous
No load detect, leakage detect, overload detect, load
change detect, over voltage detect, over temperature
protection, shrouded plugs and sockets
Yes
Ambient to 40 °C
W 190 x L 275 x H 95 mm
ABS faceplate and aluminum
2.5 kg
100-240 V
Description
MP 3AP Power Supply
Small Lab Equipment
15
ELISA Reader
LT-4000 Visible
LT-4000 is an absorbance reader suitable for ELISA and the most common colorimetric assays in visible range. The system can either be controlled thorugh
the touch screen or by a PC using the Manta Software (supplied with the reader).
Features
Multi beam detector
Touchscreen interface
Shake mode
Large built in memory
Lamp energy saving mode
Direct print facility
Short warm up time
Wide range of filters available
9 different calculation modes available
Easy plate layout setup
Integrated dust cover
Allows a 96 well palte to be read in as little as 5 seconds
Large clear screen with touchscreen interface allows easy control of instrument and visualization of data
Allows brief mixing of plate before read to ensure consistent results
Allows on board storage of 100 programs and up to 10,000 results
Gratly increases lifespan of the lamp and reduces user maintenance
Capable of interfacing with PCL laser printers via USB
Instrument is ready to read plates after only 90 second warm up
LT-4000 is supplied with 405, 450, 492 and 630 nm filters as standard. A wide range of filters between 400 and 700
nm filters are available at low cost for the instrument
Wide range of on board data processing available:
1. Absorbance model
2. Cut off mode
3. Single standard mode
4. Point to point mode
5. % absorbance mode
6. Linear regression mode
7. Index regression mode
8. Logarithm regression mode
9. Exponent regression mode
Large touchscreen interface makes it easy to set out plate
Built in dust cover for plate carrier, keeps detectors free from dust
Manta Sofware: Fully featured reader control and data analysis software included
Features
Quick start wizard
Kinetic reads
Custom microplate layouts
GLP features
Automated data analysis wizard
Multiple data views
Choice of data export options
Step by step design of protocols using Manta software. Allows you to select read type, wavelenth, shake speed/
duration, microplate layout, data export options
Manta software allows you carry out single or dual wavelenth kinetic reads using the LT-4000. As a stand-alone
instrument the LT-4000 is only able to carry out endpoint (single measurement) reads. Kinetic reads allow you to take
multiple readings over a time course
Manta has a wide range of preset microplate layotus already setup. You can also setup layouts yourself and label wells
with their contents (e.g. blank, standard, control or sample)
Allows you to enter user names and further info for each plate
Can be setup either before or after reading the plate. If setup after then it will study the assay you have run and
suggest the most appropriate data analysis. There is a wealth of qualitative and quantitative data analysis options to
choose from. This is a lot more user friendly than rival software programs
Choose how you wish to view your data (matrix, table or bar chart) Bar charts can be rotated. Individual graphs can
be shown for each well of kinetic data
Data and reports can be exported to excel, word or html
Technical data
Wavelength range: 400 – 750nm.
Photometric Range: 0.000 - 4.000 Abs
Resolution: 0.001 Abs (displayed) 0.0001 Abs (calculated)
Light Source Halogen lamp, 8V/50W
Wavelengths 405, 450, 492, 630 nm (4 additional filters optional)
Wavelength Accuracy: ±1 nm
Bandwidth: 8 nm
Calculation Method (on-board): Abs, %Abs, cut-off, linear, point to point,
log, exponential, power regression
Accuracy: ±1% or ±0.005A
Reading Speed: 5 seconds for 96-well plate (single wavelength)
Shaking Adjustable speed and time
Memory 100 tests, up to 10,000 test results
Interface: RS-232, PSTN (optional)
Display: 6” LCD
Input: Touch panel or mouse
Output: External printer or software (optional)
Net Weight: 8kg.
Dimensions: (L x W x H) 460 x 330 x 300 (mm)
Power Supply: AC 110V-220V ±10%, 50-60Hz
Cat.
EMLT4000MS
Description
EuroClone LT-4000 Visible ABS Reader
129