CAMC203EN-TRS-V-PR-GB-0000 - TR

Rotary Encoder
Linear Encoder
Motion
Systems
@CAM-C203-EN
Fast processes need fast signals. Due to optimized programming,
the camshaft gear @CAM is able to maximum outputs.




255 dynamic cam tracks
1024 programmable cams
Programmable dead times
Distribution among up to 256 outputs
www.tr-systemtechnik.de
@CAM-C203-EN
The @CAM-Module is the software solution to the mechanical camshaft gear. It simulates up to 255
dynamic cam tracks regardless of using a distance or a position measurement system. Overall, up
to 1024 cams can be programmed and allocated arbitrarily onto the 255 available cam tracks. For
programming, every cam track has a dead time available for increasing and decreasing flanks. Each
cam track can be allocated arbitrarily onto 256 outputs. Due to the existing RS232- and Ethernet
interfaces, all cams are programmable and the cam images can be shown on other application and
visualization programs.
With its Ethernet (10 / 100 Mbit) interface, the CAM-C203-EN controller is your connection to industrial Etherner. Standard implementation of the module‘s configuration (TCP/IP settings) is done by
the @ctiveIO toolkit via RS232 and Ethernet interface. If a Firmware update is neede, the @CAMModule offers the possibility of updating your Firmware via FTP (File Transfer Protocol).
@ctiveIO
LED for status display
Environmental Condition
EMV ............................................. EN 61000-4-2 (IEC-801-2)
EN 61000-4-4 (IEC-801-4)
Operating temperature ................ 0 .. +50°C
Moisture (rel.) .............................. 98% (not condensed)
Protection class ............................ IP 20 (DIN 40 050)
RUN ACT
LINK
DIAG SP
ERR COLL
CYC
PAE
WD
SDX
Ethernet
Rotary switch for
address settings in
fieldbus modules
x10
Adresse
x1
Ethernet
Ethernet 10 / 100 MBit
at RJ45
Electrical Data
Power supply ................................ 24 VDC ± 20%
Power consumption.................... .. 150 mA at 24 V
+24V
0V
Serial
RS232 at Mini USB
Supply
Power
TRS
Example:
@CAM-C203-EN
@ctiveIO
RUN ACT
LINK
DIAG SP
ERR COLL
CYC
PAE
WD
SDX
@ctiveIO
0 4
1 5
2 6
3 7
0 4
1 5
2 6
3 7
@ctiveIO
90
0 4
1 5
2 6
3 7
0 4
1 5
2 6
3 7
Cam
Nocke
3
1
Ethernet
180
0
2
0
Power
TRS
1
1
Serial
Ethernet
RS232
@P2810
+24V
0V
@P2810
Ethernet
@P2810
Adresse
x1
@P5100
x10
TRS
TRS
90
180
270
360
1
270
SSI-Encoder
Modules
Description
@CAM-C203-EN @C203 Controller as camshaft gear
Via @CAM-software cams get programed and assigned to digital outputs.
@P5100
1 Port (5V) SSI input
1 SSI Encoder including a data format of up to 32 bit per channel can be connected to this print.
@P2810
3 x 8 Port (24V) digital output
Each print has 8 digital outputs with an output voltage of 24V.
All rights reserved.
www.tr-systemtechnik.de