Rooftop Pipe Support System

™
Pipe & conduit Clamps
P1109
Pipe Clamp for
Rigid Steel Conduit
Size Range: 3⁄8" - 8"
P2008
One-Hole Clamp for
O.D. Tubing
Size Range: 1⁄4" - 1"
General Fittings
P1211
Universal Clamp for
Rigid or Thinwall
Conduit
1
Size Range: ⁄2" - 2"
P2558
Single Piece
Pipe Strap
Size Range: 1⁄2" - 6"
P1425
Pipe Clamp for Thin
Wall Conduit (E.M.T.)
P2024
Pipe Clamp for O.D.
Tubing
Size Range: 3⁄8" - 4"
Size Range: 1⁄4" - 85⁄8"
P2600
UniCushion®
Isolation Material
Cush-A-Clamp®
Pipe & Tube Cushion
Clamp Assembly
Size Range:
Pipe Series: 1⁄4" - 6"
Tube Series: 1⁄4" - 61⁄8"
P1563
Parallel Clamp for
Rigid Conduit & Pipe
Size Range: 3⁄8" - 4"
P1326
90° Angle Fitting
Size: 15⁄8" x 41⁄8"
P1031
Flat Plate Fitting
Size: 53⁄8" x 31⁄2"
P2484
90° Angle Fitting
Size: 4" x 4"
Channel
P1000
Channel
12 Gauge
Size: 15⁄8" x 15⁄8"
P1000HS
Channel with Holes
12 Gauge
Size: 15⁄8" x 15⁄8"
9
⁄16" Dia Holes
17⁄8" on Center
P1000T
Channel with Slots
12 Gauge
Size: 15⁄8" x 15⁄8"
Slots: 11⁄8 x 9⁄16"
2" on Center
P4100
Channel
14 Gauge
Size: 15⁄8" x 13⁄16"
P4100T
Channel
14 Gauge
Size: 15⁄8" x 13⁄16"
Slots: 11⁄8 x 9⁄16"
2" on Center
Prime Angle
Pipe rollers
P2474
Pipe Roller
for 1⁄2" - 4" Pipe
P2474-1
Pipe Roller
for 1" - 8" Pipe
P2475
Pipe Roller
for 6" - 16" Pipe
P2476
Pipe Roller
for 16" - 24" Pipe
PA-258
Medium Duty
14 Gauge
Size: 15⁄8" x 23⁄8"
PA-318
Heavy Duty
12 Gauge
Size: 15⁄8" x 31⁄8"
For the complete Unistrut product line, consult our website…
Channel Nuts With spring
For use with P1000 channel
P1006 - P1010
Size Range:
#
8-32 thru 1⁄2"-13
PA-138
Light Duty
14 Gauge
Size: 15⁄8" x 15⁄8"
P1012S - P1024S
Size Range:
5
⁄8"-11 thru 7⁄8"-9
For use with P4100 channel
P4006 - P4010
Size Range:
#
8-32 thru 1⁄2"-13
P4012S - P4023S
Size Range:
5
⁄8"-11 thru 3⁄4"-10
4205 Elizabeth
Wayne, MI 48184
Phone: 800-521-7730
Fax: 734-721-4106
www.unistrut.com
Manufactured
in the USA
© Unistrut Corporation • Printed in USA • UL, 5M • PF-UPIER • UAS, 10/07
Rooftop
Pipe
Support
System
Channel Length
pier
1. Align end holes of Unistrut
P1000T on bases and attach
using supplied hardware.
Torque screw to 19 ft./lbs.
2. Place pipe/tubing on support
and attach with appropriate
pipe/tubing clamp.
ROOFTOP PIPE SUPPORT SYSTEM
UP-SPSS Style Support
P1000T
Single Pier Installation
PA-138
Support spacing
Pipe Size
(Nom.)
3
⁄8"
⁄2"
3
⁄4"
1"
11⁄4"
11⁄2"
2"
21⁄2"
3"
31⁄2"
4"
5"
6"
8"
1
• Insert screw & torque to 19 ft/lbs.
Part
Number
Qty.
UniPier
Bases
Qty.
Description
UP-BK
4
0
Base Only
UP-SPSS-6 HG
4
4
6" - P4100T HG (up to 31⁄2" Pipe)
Supporting Channel
UP-SPSS-10HG
4
4
10" - P4100T HG (4" to 8" Pipe)
UP-MPDS-26HG
4
2
26" - P1000T HG for Trapeze
UP-MPDS-38HG
4
2
38" - P1000T HG for Trapeze
UP-MPDS-50HG
4
2
50" - P1000T HG for Trapeze
62" - P1000T HG for Trapeze
1. The maximum uniform load on P1000T is 400 lbs.
2. Uniform load is limited by roof base allowed load of 200 lbs. (5 psi on roof).
UniPier Product Focus
P1006
Threaded rod
NOTE: K
its do not include pipe/tubing or clamps.
• Place square washer inside P4100T.
NOTES:
P1000
UP-MPDS Style Support
• Align Center hole of P4100T on base.
2
The UniPier Rooftop support system provides a
simple and versatile way to support and manage
pipe, tubing, conduit, HVAC systems, and the
like. The UniPier system supports without roof
surface penetration and allows the parts to
remain off the surface.
P1000T
2. Place pipe/tubing on P4100T and attach
pipe/tubing clamp.
4
Applications
P1109
8" Base
1.Align center hole of Unistrut P4100T on
base and attach using supplied hardware.
Torque screw to 19 ft./lbs.
UP-MPDS-62HG
Trapeze Installation
Sch. 40 Pipe
Conduit GRC(b)
Water-Filled(a)
Single Pier Trapeze(d) Single Pier Trapeze(d)
7
7
N/A
N/A
7
7
10
10
7
7
10
10
7
7
12
12
7
7
14
14
9
9
14
14
10
10
16
16
11
11
16
16
(c)
12
12
13
20
13
13
11(c)
20
12(c)
14
9(c)
20
(c)
(c)
8
16
6
20
6(c)
17
4(c)
20
(c)
4
19
N/A
N/A
P1326
UP-BK Style Support
P4100T
(b) Based on 2002 NEC, Table 344.30(B)(2).
(c) Spacing limited to roof base allowed load of 200 lbs. (5 psi on roof).
(d) Spacing may be limited by maximum allowed total weight on trapeze
to 400 lbs.
P1109
P1006
P1006
P1000
P2474
P1000
P1006
P2484
Notes: (a) Based on ANSI/MSS SP-69, 2003 Edition, Table 3.
P2484
8" Base
P1326
www.unistrut.com
Channel Length
pier
1. Align end holes of Unistrut
P1000T on bases and attach
using supplied hardware.
Torque screw to 19 ft./lbs.
2. Place pipe/tubing on support
and attach with appropriate
pipe/tubing clamp.
ROOFTOP PIPE SUPPORT SYSTEM
UP-SPSS Style Support
P1000T
Single Pier Installation
PA-138
Support spacing
Pipe Size
(Nom.)
3
⁄8"
⁄2"
3
⁄4"
1"
11⁄4"
11⁄2"
2"
21⁄2"
3"
31⁄2"
4"
5"
6"
8"
1
• Insert screw & torque to 19 ft/lbs.
Part
Number
Qty.
UniPier
Bases
Qty.
Description
UP-BK
4
0
Base Only
UP-SPSS-6 HG
4
4
6" - P4100T HG (up to 31⁄2" Pipe)
Supporting Channel
UP-SPSS-10HG
4
4
10" - P4100T HG (4" to 8" Pipe)
UP-MPDS-26HG
4
2
26" - P1000T HG for Trapeze
UP-MPDS-38HG
4
2
38" - P1000T HG for Trapeze
UP-MPDS-50HG
4
2
50" - P1000T HG for Trapeze
62" - P1000T HG for Trapeze
1. The maximum uniform load on P1000T is 400 lbs.
2. Uniform load is limited by roof base allowed load of 200 lbs. (5 psi on roof).
UniPier Product Focus
P1006
Threaded rod
NOTE: K
its do not include pipe/tubing or clamps.
• Place square washer inside P4100T.
NOTES:
P1000
UP-MPDS Style Support
• Align Center hole of P4100T on base.
2
The UniPier Rooftop support system provides a
simple and versatile way to support and manage
pipe, tubing, conduit, HVAC systems, and the
like. The UniPier system supports without roof
surface penetration and allows the parts to
remain off the surface.
P1000T
2. Place pipe/tubing on P4100T and attach
pipe/tubing clamp.
4
Applications
P1109
8" Base
1.Align center hole of Unistrut P4100T on
base and attach using supplied hardware.
Torque screw to 19 ft./lbs.
UP-MPDS-62HG
Trapeze Installation
Sch. 40 Pipe
Conduit GRC(b)
Water-Filled(a)
Single Pier Trapeze(d) Single Pier Trapeze(d)
7
7
N/A
N/A
7
7
10
10
7
7
10
10
7
7
12
12
7
7
14
14
9
9
14
14
10
10
16
16
11
11
16
16
(c)
12
12
13
20
13
13
11(c)
20
12(c)
14
9(c)
20
(c)
(c)
8
16
6
20
6(c)
17
4(c)
20
(c)
4
19
N/A
N/A
P1326
UP-BK Style Support
P4100T
(b) Based on 2002 NEC, Table 344.30(B)(2).
(c) Spacing limited to roof base allowed load of 200 lbs. (5 psi on roof).
(d) Spacing may be limited by maximum allowed total weight on trapeze
to 400 lbs.
P1109
P1006
P1006
P1000
P2474
P1000
P1006
P2484
Notes: (a) Based on ANSI/MSS SP-69, 2003 Edition, Table 3.
P2484
8" Base
P1326
www.unistrut.com
Channel Length
pier
1. Align end holes of Unistrut
P1000T on bases and attach
using supplied hardware.
Torque screw to 19 ft./lbs.
2. Place pipe/tubing on support
and attach with appropriate
pipe/tubing clamp.
ROOFTOP PIPE SUPPORT SYSTEM
UP-SPSS Style Support
P1000T
Single Pier Installation
PA-138
Support spacing
Pipe Size
(Nom.)
3
⁄8"
⁄2"
3
⁄4"
1"
11⁄4"
11⁄2"
2"
21⁄2"
3"
31⁄2"
4"
5"
6"
8"
1
• Insert screw & torque to 19 ft/lbs.
Part
Number
Qty.
UniPier
Bases
Qty.
Description
UP-BK
4
0
Base Only
UP-SPSS-6 HG
4
4
6" - P4100T HG (up to 31⁄2" Pipe)
Supporting Channel
UP-SPSS-10HG
4
4
10" - P4100T HG (4" to 8" Pipe)
UP-MPDS-26HG
4
2
26" - P1000T HG for Trapeze
UP-MPDS-38HG
4
2
38" - P1000T HG for Trapeze
UP-MPDS-50HG
4
2
50" - P1000T HG for Trapeze
62" - P1000T HG for Trapeze
1. The maximum uniform load on P1000T is 400 lbs.
2. Uniform load is limited by roof base allowed load of 200 lbs. (5 psi on roof).
UniPier Product Focus
P1006
Threaded rod
NOTE: K
its do not include pipe/tubing or clamps.
• Place square washer inside P4100T.
NOTES:
P1000
UP-MPDS Style Support
• Align Center hole of P4100T on base.
2
The UniPier Rooftop support system provides a
simple and versatile way to support and manage
pipe, tubing, conduit, HVAC systems, and the
like. The UniPier system supports without roof
surface penetration and allows the parts to
remain off the surface.
P1000T
2. Place pipe/tubing on P4100T and attach
pipe/tubing clamp.
4
Applications
P1109
8" Base
1.Align center hole of Unistrut P4100T on
base and attach using supplied hardware.
Torque screw to 19 ft./lbs.
UP-MPDS-62HG
Trapeze Installation
Sch. 40 Pipe
Conduit GRC(b)
Water-Filled(a)
Single Pier Trapeze(d) Single Pier Trapeze(d)
7
7
N/A
N/A
7
7
10
10
7
7
10
10
7
7
12
12
7
7
14
14
9
9
14
14
10
10
16
16
11
11
16
16
(c)
12
12
13
20
13
13
11(c)
20
12(c)
14
9(c)
20
(c)
(c)
8
16
6
20
6(c)
17
4(c)
20
(c)
4
19
N/A
N/A
P1326
UP-BK Style Support
P4100T
(b) Based on 2002 NEC, Table 344.30(B)(2).
(c) Spacing limited to roof base allowed load of 200 lbs. (5 psi on roof).
(d) Spacing may be limited by maximum allowed total weight on trapeze
to 400 lbs.
P1109
P1006
P1006
P1000
P2474
P1000
P1006
P2484
Notes: (a) Based on ANSI/MSS SP-69, 2003 Edition, Table 3.
P2484
8" Base
P1326
www.unistrut.com
™
Pipe & conduit Clamps
P1109
Pipe Clamp for
Rigid Steel Conduit
Size Range: 3⁄8" - 8"
P2008
One-Hole Clamp for
O.D. Tubing
Size Range: 1⁄4" - 1"
General Fittings
P1211
Universal Clamp for
Rigid or Thinwall
Conduit
1
Size Range: ⁄2" - 2"
P2558
Single Piece
Pipe Strap
Size Range: 1⁄2" - 6"
P1425
Pipe Clamp for Thin
Wall Conduit (E.M.T.)
P2024
Pipe Clamp for O.D.
Tubing
Size Range: 3⁄8" - 4"
Size Range: 1⁄4" - 85⁄8"
P2600
UniCushion®
Isolation Material
Cush-A-Clamp®
Pipe & Tube Cushion
Clamp Assembly
Size Range:
Pipe Series: 1⁄4" - 6"
Tube Series: 1⁄4" - 61⁄8"
P1563
Parallel Clamp for
Rigid Conduit & Pipe
Size Range: 3⁄8" - 4"
P1326
90° Angle Fitting
Size: 15⁄8" x 41⁄8"
P1031
Flat Plate Fitting
Size: 53⁄8" x 31⁄2"
P2484
90° Angle Fitting
Size: 4" x 4"
Channel
P1000
Channel
12 Gauge
Size: 15⁄8" x 15⁄8"
P1000HS
Channel with Holes
12 Gauge
Size: 15⁄8" x 15⁄8"
9
⁄16" Dia Holes
17⁄8" on Center
P1000T
Channel with Slots
12 Gauge
Size: 15⁄8" x 15⁄8"
Slots: 11⁄8 x 9⁄16"
2" on Center
P4100
Channel
14 Gauge
Size: 15⁄8" x 13⁄16"
P4100T
Channel
14 Gauge
Size: 15⁄8" x 13⁄16"
Slots: 11⁄8 x 9⁄16"
2" on Center
Prime Angle
Pipe rollers
P2474
Pipe Roller
for 1⁄2" - 4" Pipe
P2474-1
Pipe Roller
for 1" - 8" Pipe
P2475
Pipe Roller
for 6" - 16" Pipe
P2476
Pipe Roller
for 16" - 24" Pipe
PA-258
Medium Duty
14 Gauge
Size: 15⁄8" x 23⁄8"
PA-318
Heavy Duty
12 Gauge
Size: 15⁄8" x 31⁄8"
For the complete Unistrut product line, consult our website…
Channel Nuts With spring
For use with P1000 channel
P1006 - P1010
Size Range:
#
8-32 thru 1⁄2"-13
PA-138
Light Duty
14 Gauge
Size: 15⁄8" x 15⁄8"
P1012S - P1024S
Size Range:
5
⁄8"-11 thru 7⁄8"-9
For use with P4100 channel
P4006 - P4010
Size Range:
#
8-32 thru 1⁄2"-13
P4012S - P4023S
Size Range:
5
⁄8"-11 thru 3⁄4"-10
4205 Elizabeth
Wayne, MI 48184
Phone: 800-521-7730
Fax: 734-721-4106
www.unistrut.com
Manufactured
in the USA
© Unistrut Corporation • Printed in USA • UL, 5M • PF-UPIER • UAS, 10/07
Rooftop
Pipe
Support
System
™
Pipe & conduit Clamps
P1109
Pipe Clamp for
Rigid Steel Conduit
Size Range: 3⁄8" - 8"
P2008
One-Hole Clamp for
O.D. Tubing
Size Range: 1⁄4" - 1"
General Fittings
P1211
Universal Clamp for
Rigid or Thinwall
Conduit
1
Size Range: ⁄2" - 2"
P2558
Single Piece
Pipe Strap
Size Range: 1⁄2" - 6"
P1425
Pipe Clamp for Thin
Wall Conduit (E.M.T.)
P2024
Pipe Clamp for O.D.
Tubing
Size Range: 3⁄8" - 4"
Size Range: 1⁄4" - 85⁄8"
P2600
UniCushion®
Isolation Material
Cush-A-Clamp®
Pipe & Tube Cushion
Clamp Assembly
Size Range:
Pipe Series: 1⁄4" - 6"
Tube Series: 1⁄4" - 61⁄8"
P1563
Parallel Clamp for
Rigid Conduit & Pipe
Size Range: 3⁄8" - 4"
P1326
90° Angle Fitting
Size: 15⁄8" x 41⁄8"
P1031
Flat Plate Fitting
Size: 53⁄8" x 31⁄2"
P2484
90° Angle Fitting
Size: 4" x 4"
Channel
P1000
Channel
12 Gauge
Size: 15⁄8" x 15⁄8"
P1000HS
Channel with Holes
12 Gauge
Size: 15⁄8" x 15⁄8"
9
⁄16" Dia Holes
17⁄8" on Center
P1000T
Channel with Slots
12 Gauge
Size: 15⁄8" x 15⁄8"
Slots: 11⁄8 x 9⁄16"
2" on Center
P4100
Channel
14 Gauge
Size: 15⁄8" x 13⁄16"
P4100T
Channel
14 Gauge
Size: 15⁄8" x 13⁄16"
Slots: 11⁄8 x 9⁄16"
2" on Center
Prime Angle
Pipe rollers
P2474
Pipe Roller
for 1⁄2" - 4" Pipe
P2474-1
Pipe Roller
for 1" - 8" Pipe
P2475
Pipe Roller
for 6" - 16" Pipe
P2476
Pipe Roller
for 16" - 24" Pipe
PA-258
Medium Duty
14 Gauge
Size: 15⁄8" x 23⁄8"
PA-318
Heavy Duty
12 Gauge
Size: 15⁄8" x 31⁄8"
For the complete Unistrut product line, consult our website…
Channel Nuts With spring
For use with P1000 channel
P1006 - P1010
Size Range:
#
8-32 thru 1⁄2"-13
PA-138
Light Duty
14 Gauge
Size: 15⁄8" x 15⁄8"
P1012S - P1024S
Size Range:
5
⁄8"-11 thru 7⁄8"-9
For use with P4100 channel
P4006 - P4010
Size Range:
#
8-32 thru 1⁄2"-13
P4012S - P4023S
Size Range:
5
⁄8"-11 thru 3⁄4"-10
4205 Elizabeth
Wayne, MI 48184
Phone: 800-521-7730
Fax: 734-721-4106
www.unistrut.com
Manufactured
in the USA
© Unistrut Corporation • Printed in USA • UL, 5M • PF-UPIER • UAS, 10/07
Rooftop
Pipe
Support
System