SubliMate

SubliMate®
Benchtop Laboratory Freeze Dryers
SubliMate® Benchtop Laboratory
Freeze Dryer Model FDL-5__
SmarTouchTM Large Touchscreen Control Technology
User-friendly interface with touchscreen controller offering a simple range of submenus for
freeze drying, defrosting, language selection, pressure, temperature units, data-logging files,
and a real-time clock
Clear, bright LCD display placed on a raised lip and seal for protection against drips due to
condensation from flasks on drying manifolds
Equipped with pre-freezing function which allows samples to be frozen before freeze drying
Vacuum Port NW16 and Socket
Vacuum port connects to the vacuum pump
Power socket for the power supply cable
2
Large Cooling Compressor
½ HP cooling compressor with a conventional
refrigeration system for optimum cooling
Guarantees sufficient cooling capacity to
maintain the low temperatures needed,
even under heavy loads when large sample
numbers are dried
Low power consumption
CFC-free and HCFC-free refrigerant used to
meet demands of global market requirements
Powder Coat
Easy to clean external surface coated with
IsocideTM to eliminate 99.9% of surface bacteria
within 24 hours of exposure
SubliMate®
Benchtop Laboratory Freeze Dryers
LusterClearTM fully flushed and
clean ice condenser surface design
One-piece stainless steel ice condenser with
smooth walls
Protects the cooling coils from damage during
ice core removal
Designed for rapid trapping of vapour for
better mass transport and vapour flow within
the system
Improves freeze drying process time
Delivers fast, efficient and reproducible freeze
drying performance
IceOutTM Active Defrost System
Simple active-heat defrost system to ensure a
quick and simple ice core removal at the end
of the cycle, allowing for back-to-back drying
cycles
Built-in drain valve allows for simple draining
3
Vacuum Break Valve
Prevents oil backstreaming from entering the
system when either the vacuum pump or the
freeze dryer is shut down
Drain Release Valve
Designed for easier removal of unwanted and
excess water from defrosting
SubliMate®, a world-class laboratory freeze dryer, engineered to be perfect for your laboratory needs. Models were designed to reach low
condensation temperatures of -55°C for removing aqueous solutions, and up to -90°C for eliminating organic solvents from your precious
samples.
Typical applications for Esco SubliMate®:
Preservation of biological agents such as bacteria and viruses
Preservation of tissue samples
Protein purification
Concentration for chemical products
Control System
The SmarTouchTM Large Touchscreen is a user-friendly interface where primary buttons for pre-freezing, freeze drying, and defrosting are
conveniently located on one side. It also features clear readouts of both temperature and pressure for process guidance and sample security.
Displays current screen name
Pre-freezing button runs
pre-freezing process to freeze
samples before freeze drying
Freeze dry button begins freeze
drying process
Displays the current temperature
of the condenser
Graph button views the history
of condenser temperature and
vacuum pressure at a certain
period of time
Displays the current pressure
of the vacuum
Displays the calculated
temperature of the product
4
Defrost button begins defrosting
cycle
Displays the status
of the compressor
Displays current date and time
Home button:
To return to the home screen
Menu button:
Help button:
Access the menu screen to
change settings, password
protection, and data log
Displays the explanation of the
buttons found on the interface
Diagnostic button:
Mute button:
Access the Diagnostic Read
Screen and the Event Log Screen
Enable / Disable alarm sound
Features:
Designed to provide all necessary information about the equipment at a glance.
Instrument-grade precision platinum temperature probes and pressure sensors are finely tuned and tested to ensure
the most reliable readout and longest operating lifespan possible. Minimum pressure can reach 0.001 mBar.
Efficient refrigeration system and tuned control ensure fast cooling time and stable temperatures once the set point
is achieved.
Equipped with warning message and mutable alarm to remind users not to open vacuum line before correct
temperature and pressure are reached.
Diagnostic functions provide condenser’s historical data to simplify equipment service.
Password protection can be set up to restrict access from unauthorized users.
Easy settings allow user to choose unit of temperature (°C or °F), unit of pressure (mBar or Pascal), change date and
time, and enable/set ring-back timer.
Available menu languages include English, German, Italian, Spanish, and French.
SubliMate®
Benchtop Laboratory Freeze Dryers
SubliMate® Benchtop Laboratory Freeze Dryer Model FDL-5__
330 mm (13.0")
1
ø 270 mm (10.6”)
2
790 mm (31.1")
3
460 mm (18.1")
4
5
6
8
9
7
10
470 mm (18.5")
400 mm (15.7")
5
1. Acrylic Jar with plain Flat Cover
2. SmarTouchTM Touchscreen Control System
3. Gasket for sealing Chamber
4. Body
5. Vacuum Break Valve
6. Drain Release Valve
7. Base Foot
8. Power Switch
9. Vacuum Port NW16
10. Socket for Power Supply Cable
Ordering Information
MoDEL Code
Description
FDL-2S8
(130001)
SubliMate® 2 Benchtop Laboratory Freeze Dryers, 2 Kg, -55°C, 220-230 VAC, 50/60 Hz
FDL-5S8
(130002)
SubliMate® 5 Benchtop Laboratory Freeze Dryers, 5 Kg, -55°C, 220-230 VAC, 50/60 Hz
FDL-5L8
(130003)
SubliMate® 5LT Benchtop Laboratory Freeze Dryers, 5 Kg, -90°C, 220-230 VAC, 50/60 Hz
FDL-2S9
(130004)
SubliMate® 2 Benchtop Laboratory Freeze Dryers, 2 Kg, -55°C, 115 VAC, 50/60 Hz
FDL-5S9
(130005)
SubliMate® 5 Benchtop Laboratory Freeze Dryers, 5 Kg, -55°C, 115 VAC, 50/60 Hz
FDL-5L9
(130006)
SubliMate® 5LT Benchtop Laboratory Freeze Dryers, 5 Kg, -90°C, 115 VAC, 50/60 Hz
TECHNICAL SPECIFICATIONS
230 VAC, 50/60 Hz
FDL-2S8
(130001)
FDL-5S8
(130002)
FDL-5L8
(130003)
115 VAC, 50/60 Hz
FDL-2S9
(130004)
FDL-5S9
(130005)
FDL-5L9
(130006)
400 x 500 x 395 mm
(15.7” x 19.7” x 15.6”)
400 x 500 x 475 mm
(15.7” x 19.7” x 18.7”)
400 x 500 x 475 mm
(15.7” x 19.7” x 18.7”)
Model Code
External Dimensions (W x D x H)
Ultimate Condenser Temperature
Ice Capacity
(24 hrs / Maximum Condenser Capacity)
Condenser Volume
Condenser Area
-55°C
-90°C
2 Kg / 2 Kg
(4.4 lbs / 4.4 lbs)
2.5 Kg / 5 Kg
(4.4 lbs / 11.0 lbs)
3.5 L
7L
0.1 m2
(1.1 ft2)
0.15 m2
(1.6 ft2)
Pressure Measurement Range
0.001 - 100 mBar
Condenser Chamber Material
AISI 304 mirror polished Stainless Steel
Display
5.7” touchscreen
Cooling Media
CFC-free
Maximum Power Consumption
6
330 W
630 W
Net Weight
36 Kg
(79.4 lbs)
40 Kg
(88.2 lbs)
Shipping Weight
41 Kg
(90.4 lbs)
46 Kg
(101.4 lbs)
495 x 573 x 395 mm
(19.5” x 22.6” x 15.6”)
495 x 573 x 543 mm
(19.5” x 22.6” x 21.4”)
Shipping Dimensions (W x D x H)
Note: Performance specifications (-55°C) are based on units operating under optimum conditions.
SubliMate®
Benchtop Laboratory Freeze Dryers
Accessories and Options
Vacuum Pump, 115 VAC, 60 Hz
VP-115
1370022
Vacuum Pump, 220 VAC, 50/60 Hz
VP-220
1370029
Vacuum Pump Oil Mist Filter
VF-1
1370030
High Vacuum Grease, 150 g/tube
VVG-150
1370028
Manual Vacuum Stop Valve
VSV-1
1370031
Vacuum Hose 1.5 m, including standard flange NW/KF 16 both sides
and NW25 adapter for vacuum pump
VVH-1
1370032
Vacuum Pump Oil 1 L
VVO-1
1370033
Spare Pirani Vacuum Gauge (pressure sensor)
VPS-1
1370034
Acrylic Jar with plain flat cover
CSS-AJ
1370025
Shelf System with 4 trays
CSS-SS4T
1370026
Mini Shelf System (for pre-freezing)
CSS-MSS
1370035
Stoppering System, with 4 trays
CSS-STS4
1370016
Heated Shelf System, with 2 trays
CSS-HSS2
1370017
Acrylic Basic Cylinder, without cover
CSS-ABC
1370018
Acrylic Cover with 8 Valves (normal design)
CSS-AC8
1370007
Stand with Wheels and Brakes
STAND
1370027
Basic Bottom to hold Manifold
MVA-BM
1370009
4 Valves Manifold
MVA-4VM
1370010
4 Valves Extension
MVA-4VE
1370011
Spare Valve for Flask Freeze Drying (normal design)
MVA-SVF
1370008
Adaptor1 for Socket size 34/35 flask
MVA-AD1
1370012
Adaptor2 for Socket size 29/32 flask
MVA-AD2
1370013
Adaptor3 for Socket size 24/29 flask
MVA-AD3
1370014
16 Tube Connection
AMP-16
1370015
Vacuum
Chambers and Shelf
Systems
Stand
Manifold, Valves, and
Adaptors
Ampoule / Tube
Connector
VP-_
VF-1
VVG-150
7
VVH-1
VSV-1
VVO-1
VPS-1
CSS-SS4T
CSS-ABC
STAND
MVA-BM
MVA-4VE
MVA-SVF
MVA-AD_
AMP-16
ESCO Global Network
ART Equipment
Biological Safety Cabinets
CO2 Incubators
Cold Storage
Compounding Pharmacy Equipment
Containment / Pharma Products
Ductless Fume Hoods
Lab Animal Research Products
Laboratory Fume Hoods
Laboratory Incubators
Laboratory Ovens
Laminar Flow Cabinets
Laboratory Freeze Dryers
PCR Cabinets
PCR Thermal Cyclers
Powder Weighing Balance Enclosures
Life Science • Chemical Research • Assisted Reproductive
Technology (ART) • Pharmaceutical Equipment • General Equipment
Esco Technologies, Inc. • 903 Sheehy Drive, Suite F, Horsham, PA 19044, USA
Toll-Free USA and Canada 1-877-479-3726 • Tel 215-441-9661 • Fax 484-698-7757
[email protected] • www.escolifesciences.us
Esco Micro Pte. Ltd. • 21 Changi South Street 1 • Singapore 486 777
Tel +65 6542 0833 • Fax +65 6542 6920 • [email protected]
www.escoglobal.com
9010180_Sublimate_Freeze_Dryer_Brochure_A4_vB_03/11/2015
Esco can accept no responsibility for possible errors in catalogues, brochures and other printed materials. Esco reserves the right
to alter its products and specifications without notice. All trademarks and logotypes in this material are the property of Esco and the
respective companies.
The Esco Group of Companies is a global life sciences tools provider with sales in over 100 countries. The group is active in lab
equipment, pharma equipment and medical devices. Manufacturing facilities are located in Asia and Europe. R&D is conducted
worldwide spanning the US, Europe and Asia. Sales, service and marketing subsidiaries are located in 12 major markets including
the US, UK, Singapore, Japan, China and India. Regional distribution centers are located in the US, UK, and Singapore.
Esco Global Offices: Sydney, Australia | Manama, Bahrain | Beijing, China | Chengdu, China | Guangzhou, China
Shanghai, China | Kowloon, Hong Kong | Bangalore, India | Delhi, India | Mumbai, India | Jakarta, Indonesia | Rome, Italy
Osaka, Japan | Kuala Lumpur, Malaysia | Melaka, Malaysia | Manila, Philippines | Singapore | Midrand, South Africa
Seoul, South Korea | Bangkok, Thailand | South Yorkshire, United Kingdom | Philadelphia, PA, USA | Hanoi, Vietnam
Esco Micro Pte Ltd
Cert. No: 651076
PT Esco Bintan Indonesia
Cert. No: 651333/E
PT Esco Bintan Indonesia
Cert. No: Q2N130383797001