MACHINERY COMPANY OF BOSTON

WIGGLESWORTH
MACHINERY COMPANY OF BOSTON
PROVIDING THE FINEST IN USED & RECONDITIONED MACHINE TOOLS SINCE 1928
2012 CATALOG
72” SPRINGFIELD
CNC Universal
Vertical Grinder
see page 4 for details
I NSPECT M ACHINERY
U NDER P OWER
I N O UR WAREHOUSE
OVER 84 YEARS OF
QUALITY MACHINE TOOLS
#1388
VISIT US AT www.wigglesworthmachinery.com
FOR PHOTOS AND LISTINGS OF OUR ENTIRE INVENTORY UPDATED DAILY
ALL MACHINES IN OUR INVENTORY
ARE OFFERED WITH A 30 DAY GUARANTEE
P.O. B OX 166 • 60 B ORDER S TREET • E AST B OSTON , M ASSACHUSETTS 02128
P HONE : 617.567.7210 • F ax : 617.561.0265
Website: www.wigglesworthmachinery.com • E-Mail: [email protected]
WIGGLESWORTH
MACHINERY COMPANY OF BOSTON
PROVIDING THE FINEST IN USED & RECONDITIONED MACHINE TOOLS SINCE 1928
PHONE: 617.567.7210
•
FAX: 617.561.0265
Website: www.wigglesworthmachinery.com • E-Mail: [email protected]
MACHINES IN OUR INVENTORY ARE TESTED AND REPAIRED BY
OUR QUALIFIED MECHANICAL AND ELECTRICAL PERSONNEL
AND SOLD WITH A MDNA 30 DAY RETURN PRIVILEGE
D EEP HOLE DR ILLS / GUN DRI LLS
1998
1" x 15" ELDORADO M75 Gun Drill,
High Pressure Coolant, Ballscrew,
1984, Reconditioned
#1373
1" x 30" ELDORADO M75 Gun Drill,
High Pressure Coolant, Ballscrew Feed,
1977, Reconditioned
#1405
1” x 15” ELDORADO M75 Gun Drill,
High pressure Coolant, Ballscrew, 1979, Reconditioned
#1441
1" x 30" ELDORADO M75 Knee Type Gun Drill,
13" x 51" Table, X-32", Y-15", High
Pressure Coolant, 1998, Reconditioned #1225
1" x 30" ELDORADO M75 Gun Drill,
High Pressure Coolant, Ballscrew, 1982, Reconditioned
#1430
GUN DRILL SPECIALISTS
We can provide a highly informative demonstration as well as a detailed analysis and consultation regarding your
specific job by our gun drill expert with over 30 years experience.
All gun drills and high pressure coolant systems are test cycled. Anything worn or broken is repaired or replaced. The
machine is guaranteed to be complete and in ‘ready to work’ condition as soon as it arrives on your floor.
H Y D RA U L I C P R E S S
1-1/2" x 48"
DEHOFF
Gun Drill,
High Pressure
Coolant,
Ballscrew
Feed,
Reconditioned
#1408
100 Ton
PACIFIC
Pressformer
#100 PF II
Hydraulic
Press,
1997 #1341
CHECK THE WEB
FOR OUR
LATEST ADDITIONS
INSPECT
UNDER
POWER
IN OUR
WAREHOUSE
1997
2
CALL FOR DETAILED SPECIFICATIONS AND PRICES
C N C H O R I Z O N TA L B O R I N G M I L L S
5" LUCAS
No. 30T99
CNC HBM,
4-Axis
Fanuc OM,
108”
Vertical,
108” Cross,
60” x 110”
Table
#1265
4.3" UNION CNC HBM, X-80", Y-50,
49" x 55" Rotary Table, #50 Taper,
New Heidenhain TNC 360 in 2000
5" GIDDINGS & LEWIS No. PMC50 CNC HBM,
Fanuc 6 CNC, 48" x 122" Table,
110" Cross, 72" Vertical
#1262
#1420
4" LUCAS No. 441B72 CNC 3-Axis Horizontal Boring Mill, X-60", Y-60", 42" x 74"Table, #50 Taper, 15 HP, Retrofit Candidate
#416
H O R Z O N TA L B O R I N G M I L L S
3” WOTAN No. B75T HBM,
31-1/2” x 39-1/2” Built in Rotary Table,
#40 Taper, mid 1970’s
#1292
4" LUCAS 441B-72 HBM, 72" Cross,
48" Vertical, 53" Saddle, Tailstock,
#50 Taper, Pendant, 1970
#1416
5" WOTAN B130S HBM, 78" Vertical,
78" Cross, 60" x 67" Built in Rotary
Table, #50 Taper, 1975
#1421
V E RT I C A L B O R I N G M I L L S
EXTRA HEIGHT
52" BULLARD Dynatrol VBM,
4 Jaw Chuck, 58" Swing,
40" Under Rail, Ram & Side
Head, 1967
#1223
56” BULLARD Dynatrol, CNC VBM,
4 Jaw Chuck, Extra Height
Under Rail, Ram Head, G.E.
2000 Control, Aerospace #1293
42" GIDDINGS & LEWIS Vertical Boring Mill, 4 Jaw Faceplate, 52" Swing, 37" Under Rail, Turret & Side Head
#1437
36" WEBSTER & BENNETT VBM,
4 Jaw, Turret, 54" max Swing,
40"Under Adjustable Cross,
1977
#1417
46" BULLARD Dynatrol VTL,
4 Jaw Chuck, Heavy Duty,
(1) Ram Head, 64" Under Rail,
1973
#1168
WIGGLESWORTH
MACHINERY COMPANY OF BOSTON
MACHINERY COMPANY OF BOSTON
Phone: 617.567.7210
Fax: 617.561.0265
E-Mail:
[email protected]
Web:
www.wigglesworthmachinery.com
3
C N C V E RT I C A L M A C H I N I N G C E N T E R S
1991
1990/2004
96" MONARCH
VMC-RT Vertical
Machining Center,
Fanuc 11M,
C-96", W-35",
48"Y, Z-10",
5200 RPM,
50 ATC,
1990/2004 #1396
KIWA 510
Colt VMC,
Fanuc OM,
10,000 RPM,
X-20", Y-16",
Z-18", 17” x
21-1/2” Table,
#40 CAT,
16 ATC,
1991
#1144
HITACHI SEIKI No. VA-40 CNC Vertical Machining Center,
X-28", Y-16", Z-18", #40 CAT, 25 ATC, Fanuc 6M Control, 1982
#847
RADIAL DRILLS
5' x 15"
CARLTON 3A
Radial Drill,
15 HP, #5 MT,
Rapids, Clamping,
Power Arm &
Column, 1970
#1429
1981
6' x 19"
CARLTON #4A
Radial Drill,
40 HP, #6 MT,
15-1500 RPM,
Power Traverse
& Clamping,
1981
#1386
4' x 11" CARLTON
#1A Radial Drill,
7.5 HP, Power
Traverse & Clamping,
80 to 2000 RPM,
1974
#1385
CYLINDRICAL GRINDERS - PLAIN & UNIVERSAL
1988
5" x 12" JONES & SHIPMAN Model 1212
Universal Cylindrical Grinder, Internal
Grinding Attachment, Excellent
#1328
14" x 120" NORTON LC-5 Plain Cyl. Grinder,
Semi-Automatic, 30" x 3" Wheel,
20 HP, DRO, Coolant, 1968
#1431
17" x 60" KELLENBERGER 1500U Univ. Cylindrical Grinder,
Internal & Face Grinding, 1986, Excellent see photo back cover #1439
16" x 21" SHIGIYA (Okamoto) No. GP-40B-60A
Plain Cylindrical Grinder, Auto Cycle,
Plunge, Coolant, 1988
#1415
18" x 48" LANDIS 3RH Univ. Cylindrical Grinder,
Swing Down Internal Grinding Attachment, Coolant, 1979
#1440
UNIVERSAL VERTICAL G R I N D E R S
SPRINGFIELD
CNC Universal
Vertical Grinder,
72" Table,
82" Swing,
(2) Motorized
Spindles,
Fanuc 16i,
Rebuilt
#1388
48" SPRINGFIELD
48E-2MS Universal
Vertical Grinder,
2 Motorized
Spindles,
48" Under Rail,
60" Swing,
1984,
Aerospace #1276
see larger photo
on front cover
4
CALL FOR DETAILED SPECIFICATIONS AND PRICES
S U R FA C E G R I N D E R S
1995
1997
6" x 18" OKAMOTO ACC-618DX2,
Power Elevation, Elec. Mag Chuck,
Dresser, Coolant, 1995
#1202
8" x 20" OKAMOTO No. ACC-820-EX Surface
Grinder, Fanuc 21G "Quick Teach", Auto
Down Feed, Elec. Chuck, Coolant, 1997 #1286
1992
8" x 20" OKAMOTO ACC-820-DX Surface
Grinder, Auto Downfeed, Elec. Mag.
Chuck, Coolant, 1992
#1397
R O TA RY S U R FA C E
1992
RECONDITIONED
20" x 36" OKAMOTO ACC-20360DX Surface
Grinder, Auto Downfeed, Elec. Mag.
Chuck, Coolant, 1992
#1398
20” x 48” OKAMOTO No. PSG-125 Surface
Grinder, Auto Downfeed, Electromag
Chuck, Coolant System, 1980
#1382
JIG GRIN DERS
MOORE No. 2 Jig Grinder, 10” x 19” Table,
X-16-1/2", Y-10-1/2", 25 to 225 RPM, 40000 RPM Head, Reconditioned
#768
42” BLANCHARD No. 22-42 Rotary Surface
Grinder, 50 HP, Coolant, 12” Under Wheel,
w/Guards, 1966, Reconditioned
#943
MOORE No. 3 Jig Grinder, 11" x 24" Table,
18” Longitudinal, 3-5/8"Spdl. Slide, 25-225 RPM, 1969, Excellent
#596
J IG BORER
REBUILT
No. 3 MOORE
Jig Borer,
11" x 24" Table,
18" Longitudinal,
11" Cross Travel,
DRO, 1965
#1228
MOORE No. 3
Jig Grinder,
Built 1970,
Reconditioned by
MOORE within
Factory Standards,
Excellent
#692
MOORE-FOSDICK No. 32G
Jig Grinder, 18” x 32” Table,
X-30”, Y-18”, Z-14”, 1968,
40,000 RPM Head
#715
WIGGLESWORTH
MACHINERY COMPANY OF BOSTON
MACHINERY COMPANY OF BOSTON
CHECK THE WEB FOR
OUR LATEST ADDITIONS
Phone: 617.567.7210
Fax: 617.561.0265
E-Mail:
[email protected]
Web:
www.wigglesworthmachinery.com
5
ROTARY TABLES
Our Rotary Tables are thoroughly checked and tested for accuracy and load capacity. Standard procedure for a
“Reconditioned” table is to dismantle it, check bearing surfaces, locking pins & bushings, replace air lines and air
valves, reassemble and test under full load. Table tops that show to have excessive wear are reground.
ALL OF OUR ROTARY TABLES ARE SOLD RECONDITIONED
12" HIPERDEX CNC Rotary Table,
20"Swing, 2-1/8" Thru Hole, 10" 3-Jaw
Chuck, Manual Tailstock
#838
15-3/4" WALTER Model RIS400
Rotary Table
#536
19-1/2" WALTERS Rotary Table,
Tilt & Rotate, Manual, Excellent
#530
19-1/2" IMPERIAL Tilting Rotary Table
#61
20" x 20" DeVLIEG Airlift Rotary Table,
(4) 90° Lock, 360° Clamping
#1422
23-1/2" IMPERIAL Rotary Table,
Manual, Reconditioned, Excellent
#60
24" ROTAB Precision
Manual Tilt
Rotary Table,
Power Rotate,
1965,
Excellent
#44
25" x 36" LUCAS Airlift Rotary Table,
(4) Paralell, (4) Lock, 8000 Lb. cap,
Free Turn w/Air, Excellent
30" PRATT & WHITNEY Power Rotate
Rotary Table, 2200 Lb. cap.
30" PRATT & WHITNEY Vertical
Precison Rotary Table, 1200 Lb cap.
48" x 48" LUCAS Airlift Rotary Table,
(12) Lock Bolt Positions, Man. Clamp,
27000 Lb. cap., 1968, Excellent
#400
30" x 30" DeVLIEG Airlift Rotary Table,
7500# cap., (4) Lock Bolt Positions,
360° Clamping
#1401
30" x 40" DeVLIEG Airlift Rotary Table,
7500# cap., (4) Lock Bolt Positions,
360° Clamping
#1402
30" x 40" DeVLIEG “E” Rotary Table
#793
40" x 50" DeVLIEG "AM" Airlift
Rotary Table, (4) Lock Bolt Positions #983
50" Dia. PRATT & WHITNEY Precision
Power Rotary Table, 5000 Lb. cap.,
Reconditioned
#1346
60" x 60" LUCAS Airlift Rotary Table,
1972, Reconditioned
#1392
60" x 72" GIDDINGS & LEWIS Airlift
Rotary Table, Reconditioned
#1308
#799
#1368
#1403
ROTARY TABLE ON POWERED SLIDEWAY
48" x 60" LUCAS Airlift Rotary Table,
(4) 90° Lock, 360° Clamping,
1978, Reconditioned
#1426
60" x 60" CINCINNATI "Air Mist" Rotary Table on Powered Slideway, 48" Travel, 1988
#1436
A C C E S SO R I E S
ANGLE PLATES / ANGLE BLOCKS
DeVLIEG Precision Matched Set,
20"W x 40"H, T-Slots
#1425
19" x 72" HD 3-Sided Cast Iron, T-Slots #1317
20" x 60" Heavy Duty
Cast Iron
Angle Plates,
10 T-Slots,
26" Deep
#1400
24"W x 48"H GIDDINGS & LEWIS,
T-Slots, 30" Deep, Matched Set
30” x 48” G & L Angle Plates, (1) Pair
48" x 48" GIDDINGS & LEWIS
Angle Plates, Double Sided
6
#1434
#1384
#426
MILLING HEAD - Right Angle
FACING HEADS
22" GIDDINGS & LEWIS Facing Head,
0-32"Range, For Use on 3” HBM
30" GIDDINGS & LEWIS Facing Head,
for 4”, 5" or 6" Bar Machines,
w/Hand Wheel
LUCAS Right Angle Milling Head,
39” Reach
#1348
SINE TABLE
48" x 48"
PRATT &
WHITNEY,
Powered,
6 Horiz. &
6 Vertical
Tee Slots
#1427
#407
#1409
31” LUCAS
Facing Head,
For 6” Bar
Machines,
0” to 43”
Range
#1407
36” GIDDINGS & LEWIS Facing Head,
Model CF, 0 to 54" Range,
Power Feed, 6" Hole
#1412
HAVE MACHINERY FOR SALE?
E-MAIL US YOUR LIST AND WE’LL MAKE YOU AN OFFER!
R E C O N D I T I O N E D L AT H E S
2001
1983
10" x 20" MONARCH EE Engine Lathe,
Solid State Drive, Inch/Metric
Threading, Chuck, 1983
#1433
37"/49" x 197" TIMEMASTER Engine Lathe,
30 HP, 27.5"Over Cross Slide, 4" Hole,
Inch/Metric, DRO, Steadies, 2001
#1361
56" x 160" MONARCH Seies 91
Engine Lathe, 60 HP, 41"OCS,
2-Axis DRO, 1966, Reconditioned
#1411
38" x 72" LODGE & SHIPLEY No. 3220-26
Engine Lathe, 40 HP, D-1-11, 25" Wide
Bed, 27.5” Sw. Over Cross, 1970
#612
56" x 192" AMERICAN Pacemaker
Engine Lathe, 40 HP, 42" Over Cross
Slides, Taper, Hard Ways, 1956
#1359
1981
11" x 18" HARDINGE Engine Lathe,
Inch/Metric, Chuck and Toolpost,
Coolant, 1981
#1156
11" x 18" HARDINGE Engine Lathe,
Inch/Metric, Chuck, Toolpost, Collets,
1981, Excellent
#1352
40" x 288" LODGE & SHIPLEY Magnaturn
Engine Lathe, 25" OCS, Taper, Chuck,
Steady, Excellent
#1406
84" x 348"cc AMERICAN Engine Lathe,
62” Swing Over Cross, Taper Attach.,
52” Chuck, Steadies, 1961
#1432
H O L L O W S PI N D L E
17"/24" x 60" MAZAK Engine Lathe, Inch/mm
Threading, 2" Hole, 10" Chuck,
Reconditioned
#1423
43" x 192" AMERICAN Engine Lathe,
40 HP, 30" ocs, Taper, 39" Chuck,
2 Steadies, Hardways,1956
#1428
1980
21"/32" x 84" CLAUSING Colchester Engine
Lathe, 3.5" Hole, Inch/mm Threading,
Steady Rest, 1980
#1419
26"/53" x 54"/96" LeBLOND Hollow
Spindle Lathe, 5" Hole, Sliding Bed Gap,
Taper, Chucks, Reconditioned,
see photo on back cover
#1395
26" x 96" LEBLOND Regal Engine
Lathe, 9-1/4" Hole, Front & Rear
Chucks, Taper, Steady
#1438
1990
51"/61" x 100" SUMMIT "GRAZIANO"
Engine Lathe, 30 HP, 6" Hole, 35" OCS,
inch/metric, 48" Chuck, 1970
#1413
WIGGLESWORTH
MACHINERY COMPANY OF BOSTON
MACHINERY COMPANY OF BOSTON
38" x 192" LODGE & SHIPLEY CNC Hollow
Spindle Oilfield Lathe,12.5" Hole,
Fanuc OTC, Front & Rear Chucks, 1990 #1312
Phone: 617.567.7210
Fax: 617.561.0265
E-Mail:
[email protected]
Web:
www.wigglesworthmachinery.com
7
INSPECT MACHINERY UNDER POWER
IN OUR WAREHOUSE
O N LY 5 M I N U T E S F R O M
LOGAN I NT’L AI RP ORT
PHONE: 617.567.7210 • Fax: 617.561.0265
Website: www.wigglesworthmachinery.com • E-Mail: [email protected]
WIGGLESWORTH
MACHINERY COMPANY OF BOSTON
MACHINERY COMPANY OF BOSTON
P.O. B OX 166
E AST B OSTON , MA 02128
ROUTE TO:
■ Plant Manager
■ Shop Superintendent
■ Purchasing
■ Manufacturing Engineer
OVER 84 YEARS OF QUALITY MACHINE TOOLS
26"/53" x 54"/96" LeBLOND
Hollow Spindle Lathe
#1395
see page 7 for details
17” x 60” KELLENBERGER
Universal Cylindrical
Grinder
CHECK THE WEB FOR
OUR LATEST ADDITIONS
1986
*anticipated
shape of
see page 4
for details
#1439