Kubota Engine America

KUBOTA
Reman
Built to Kubota OEM Specifications
Remanufactured
KUBOTA
Alternators
& Starters
One-year remanufactured parts warranty*
Competes with aftermarket units
Leaves a smaller footprint
Maximize uptime
Turf Mowers, Skid Steers,
Aerial lifts and more!
In any application, demand
Genuine KUBOTA Parts, Remanufactured
to last, from the people that
supplied the original.
KUBOTA ENGINE AMERICA
For more information
about the Kubota Reman
Program visit:
www.kubotaengine.com
*Refer to Limited Warranty on Remanufactured
Alternators and Starters Statement for details.
Peace of mind, always...
KUBOTA ENGINE AMERICA
Kubota quality where it counts . . . on the inside!
KUBOTA
Test Starter #1
Reman
After completing 22,497 starts
the brush material remains in
contact with the starter armature.
This remanufactured starter still has
several starts before brush failure.
Demand Genuine Kubota
The wrong brush material
composition resulted in short
aftermarket starter life due to
excessive brush wear resulting
in loss of brush contact to
the armature.
1. Now you have an option from Kubota!
Purchase either New or Remanufactured.
2. Same great quality as a New Kubota
Alternator or Starter.
3. Choose from over 30 part numbers offered
by KEA as Remanufactured.
4. Purchase your newly remanufactured
Kubota part for a valued savings.
5. Enjoy the peace of mind that comes
with demanding genuine Kubota!
Kubota Reman
VS
Aftermarket
Passed
Failed
Passed
Failed
Passed
Failed
with
22,497 starts
after
3,593 starts
Test Alternator #1
After 251 hours of testing the
remanufactured unit shows no signs
of overheating. Brush holder, seal
and brushes are in good condition.
Inferior plastic used in the brushholder of the aftermarket part
resulted in failure due to melting
under high heat situations.
with
251 hours
after
44 hours
Test Starter #2
Remanufactured starters are
assembled with the correct brush
springs and the springs are in the
correct position on the brushes.
Responsibly
Remanufactured
Aftermarket manufacturer use of the
wrong brush spring and poor
assembly techniques resulted failure
due to the brush spring not seated
on the brush in the correct position.
with
20,863 starts
after
176 starts