User``s Guide - Triner Scale

User’’s Guide
TS 700-MS Series 2
Full Function/Advanced Function Digital Indicator
www.trinerscale.com
Compatible with DataLog
TM
Scale-to-PC Data Logging Software
UG Version 2.4_02-15-13
Triner Scale & Mfg.Co., Inc.
8411 Hacks Cross Road
Olive Branch, MS 38654
(800) 238-0152
www.trinerscale.com
© 2011 Triner Scale. All rights reserved.
Rev 09/04/12
User’’s Guide | TS-700 MS
Table of Contents
Specifications.................................... 2
Operation .......................................... 4
Load Cell Connections ...................... 7
Serial Port Connections .................... 8
Parameters and Settings................... 9
Data Output Formats ...................... 15
Using A Receipt Printer................... 18
Error Codes .................................... 19
Factory Default Settings.................. 20
!!!! CALIBRATION WARNING !!!!
Calibration AND inspection of calibration properties
is prohibited unless done so by
a qualified scale technician.
WARNING
The indicator has static sensitive
components.
Do not make any connections without
powering off the indicator.
1
User’’s Guide | TS-700 MS
Specifications
TECHNICAL PARAMETERS
Resolution ...................... Display: 30,000
ADC ................................ 2,000,000
Zero stability error ........... TK0 < 0.1µV//K
Span stability error .......... TKspn < ± 6 ppm//K
Sensitivity (internal)......... 0. 3 µV /d
Input voltage ................... -30~30mV DC
Excitation circuit .............. 5 VDC
Load Cell Max................. 8, 350
AC power ........................ AC100~250V
Operation temp ............... - 10 °C ~ + 40 °C
Operation humidity.......... 90% RH
Storage temp .................. - 40 °C ~ + 70 °C
FUNCTIONS
Hold Hold weight on scale, or Hold peak weight*,
or Hold unstable/animal weight*
Total Total Weight: total of multiple weighings
Kg/lb Display weight in pounds or kilograms
Gross/ Tare container weight, display gross or net
Tare weight
Zero Returns the indicated weight to ““0””
Print Prints receipt (requires optional printer)
PC connectivity (requires PC software)
*requires adjustment of parameter settings
2
User’’s Guide | TS-700 MS
OVERVIEW
Digital Readout/Display
Enclosure
Keypad
Weighing Platform Quick Connect Socket
AC Adapter Socket
RS232 DB9 Socket (Printer, PC, Remote Display)
3
User’’s Guide | TS-700 MS
Operation
KEYS AND THEIR FUNCTIONS
KEY OPERATION / FUNCTION
On/Off Press and hold for 2+ seconds to operate.
Hold To Hold Weight on Scale (manual hold):
With weight on scale, press Hold key.
To Hold Peak Weight of Multiple Weighings
(auto hold)*:
To enable, press Hold key before loading scale.
To Hold Weight of an Unstable Load (auto
hold)*:
To enable, press hold key before loading scale.
To Release the Hold Function:
Press hold key again to return to normal
operation.
*requires adjustment of parameter #11
4
User’’s Guide | TS-700 MS
In settings mode:
Return Key
- Previous
- Pressed with other key(s) for functions.
Total To Add Weights:
With weight on scale, press the Total key to
place weight and count in memory. Remove
weight, place next item on scale, press Total to
add weight to total weight and total count.
NOTE:
To print
totals, press
and hold the
Print key for
3 seconds
while in
View Totals
mode
(requires
optional
printer).
To View Totals:
Press Total and Print key at the same time. The
total weight will flash continuously.
To go out of view totals mode:
Press and hold the Total key. ““Clr n”” will
display.
If you wish to continue adding to the totals,
press the Print to accept the ““Clear-No”” prompt.
Continue weighing and adding items as
required.
To Clear the Totals Memory:
Press the Zero/Up Arrow key to change the
““Clr n”” display to ““Clr y””. Press the Print key to
accept the ““Clear-Yes”” prompt.
In settings mode:
Previous/Home Key
First press = previous
Second press = home
kg/lb Press to change pounds/kilograms
In settings mode:
Left arrow key
Press to move active digit one unit over to the
left
5
User’’s Guide | TS-700 MS
Gross For use after a TARE weight has been stored in
the indicator. Press key to toggle view between
gross and net weight.
PLEASE NOTE that there may be a momentary
pause in the display when going from gross to
tare weight.
In settings mode:
Right arrow key
Press to move active digit one unit over to the
right
Tare With weight on the scale, press to Tare the
weight.
Press again to remove Tare weight.
In settings mode:
Down arrow key
Press to reduce value of active (flashing) digit.
Zero Press key to zero the scale.
In settings mode:
Up arrow key
Press to increase value of active (flashing) digit.
Print Press key to print a ticket (requires optional
printer).
In settings mode:
Enter key
Press to accept entry
Press with other keys for functions
IF EQUIPPED WITH INTERNAL RECHARGEABLE
BATTERY: Fully charge the battery for 18 hours before
operating on battery power.
6
User’’s Guide | TS-700 MS
Load Cell Connections
The indicator can connect with a maximum of
eight (8) 350 load cells, 4 wire or 6 wire
configurations.
Excitation voltage for the load cell is 5VDC, the
maximum output current is 120mA.
Quick Connect Pins
7
User’’s Guide | TS-700 MS
Serial Port Connection
RS232 CONNECTOR
The serial port connector is for attaching a
peripheral device such as a printer or remote
display, or for connecting the indicator to a PC.
NOTE: PC interface requires specific
software to be installed on the PC.
Output to PC
8
User’’s Guide | TS-700 MS
Parameters and Settings
CAUTION: Use care when accessing and
adjusting your indicator’’s parameters.
Several parameters can be accessed that,
if altered, will change your indicator’’s
operations.
TO ACCESS AND ADJUST THE TS-700 MS
PARAMETERS:
Press the PRINT and HOLD keys. ““C”” will
display. Release the keys. ““C08”” will display,
with the 8 flashing. The digit flashing is the
active digit, and can be adjusted up or down* by
using the ZERO/UP ARROW or TARE/DOWN
ARROW key. Use the KG-LB/LEFT ARROW
key and the TARE/RIGHT ARROW KEY to
change which units digit is active (flashing).
*TIP: Parameters C01 through C07 are
locked out, and are only accessible by
scale technician during calibration.
Navigate to the setting parameter you wish to adjust
and use the arrow keys to change the settings
values. Press the PRINT (
) key to accept your
settings, then press the TOTAL (
) key to exit.
EXAMPLE: To adjust the date setting in
parameter C16:
With ““C08”” flashing, use the left arrow key
change the active digit from the 8 to the 0
(the 0 will flash).
Use the up arrow key to increase the 0
to 1.
9
User’’s Guide | TS-700 MS
Use the right arrow key to move the active
digit from the 1 to the 8 (the 8 will flash).
Use the down arrow key to reduce the 8 to
6 (C16 will display).
Press the PRINT (
) key.
The display will show digits for month, day
and year. Use the arrow keys as
discussed above to navigate to and
change the digits.
Press the PRINT (
settings.
) key to accept your
Press the TOTAL (
) key to exit.
PARAMETER
FUNCTION
OPTIONS
C08
Warning tone
C09
Automatic
Power-off
0 = no auto power off
10 = power off
automatically if no
change within 10
minutes.
30 = power off
automatically if no
change within 30
minutes.
60 = power off
automatically if no
change within 60
minutes.
C10
Power saving
setting
(display
backlight on/off)
0 = no power saving
setting
3 = close display if no
change within 3min.
5 = close display if no
change within 5 min.
10
0 = no warning tone
1 = warning tone on
User’’s Guide | TS-700 MS
C11
Hold function
0 = no hold function
1 = hold peak weight
2 = hold weight on scale
3 = hold animal weight
4 = reserved
Note: hold peak weight
shows the max. load of
multiple weighings.
C12
Kg/lb
conversion
0 = kg/lb conversion
disabled
1 = kg/lb conversion
enabled
C13
Upper/lower
limit alarm
Enter numeric values for
upper and lower
checkweighing limits.
C14
Lower limit
alarm value
C15
Inner Code
display
Enter C15 to check the
inner code.
C16
Date
Set the date, from left to
right: year/month/day
C17
Time
Set the time from left to
right: hour/min./sec.
C18
Communication
setting
(Serial interface
data output
method)
C19
Baud rate
0 = Close serial interface
data output
1 = Continuous sending,
connect big display
2 = Print key sends data to
printer or PC.
3 = PC command request
(DataLogPC software)
4 = PC continuous
sending.
5 = Remote display
continuous sending
format.
0 = 1200
2 = 4800
11
1 = 2400
3 = 9600
User’’s Guide | TS-700 MS
C20
CAUTION:
Changing
these
parameters will
affect the
indicator’’s
performance.
Zero range
(amount that
can be zeroed
out with the
Zero key)
C21
Zero range at
power-up
C22
CAUTION:
Changing
these
parameters will
effect the
indicator’’s
performance.
Automatic Zero:
tracking range
0 = disable zero tracking
0.5 = ±0.5d
1.0 = ±1.0d
2.0 = ±2.0d
3.0 = ±3.0d
4.0 = ±4.0d
5.0 = ±5.0d
Note:
•• d = division
•• The zero tracking range
cannot be more than
manual zero range.
C23
Automatic
Zero; tracking
time
0 = disable zero tracking
time
1 = 1 second
2 = 2 seconds
3 = 3 seconds
C24
CAUTION:
Changing
these
parameters will
effect the
indicator’’s
performance.
Overload range
0 = disable manual zero
setting
1 = ±1% max capacity
2 = ±2% max capacity
4 = ±4% max capacity
10 = ±10% max capacity
20 = ±20% max capacity
100 = ±100% max capacity
0
1
2
5
10
20
= no initial zero setting
= ±1% max capacity
= ±2% max capacity
= ±5% max capacity
= ±10% max capacity
= ±20% max capacity
00 = close overload range
01d -- 99d
(d = division)
12
User’’s Guide | TS-700 MS
C25
Negative display
C26
CAUTION:
Changing
these
parameters will
affect the
indicator’’s
performance.
Standstill time
C27
Standstill range
0 = -9d
10 = 10% max. capacity
20 = 20% max. capacity
50 = 50% max. capacity
100 = 100% max. capacity
0 = quick
1 = medium
2 = slow
1 = 1d 2 = 2d
5 = 5d 10 = 10d
(d = division)
C28
CAUTION:
Changing
these
parameters will
affect the
indicator’’s
performance.
Digital filter
To compensate
for unstable
loads on the
weighing
platform (for
example, animal
weighing).
0 = close dynamic filter
1 = 1 digital filter strength
2 = 2 digital filter strength
3 = 3 digital filter strength
4 = 4 digital filter strength
5 = 5 digital filter strength
6 = 6 digital filter strength
C29
CAUTION:
Changing
these
parameters will
affect the
indicator’’s
performance.
Noise filter
0=
1=
2=
3=
C30
Format of date
print out
0 = yy.mm.dd
1 = mm.dd.yyyy
2 = dd.mm.yyyy
3 = yyyy.mm.dd
C31
Analog output
setting
0 = 0~5Vouput
1 = 4~20mA output
13
disable noise filter
1 digital filter strength
2 digital filter strength
3 digital filter strength
User’’s Guide | TS-700 MS
C32
RESERVED
-------
C33
Relay output
setting
(optional)
0 = Close relay output
1 = Open relay output
function 1
2 = Open relay output
function 2
3 = Reserved menu
C34
RESERVED
-------
C35
RESERVED
--------
C36
CAUTION:
Changing
these
parameters will
affect the
indicator’’s
performance.
Gravity of
calibration
location
C36 = 9.7000 -- 9.9999
C37
CAUTION:
Changing
these
parameters will
affect the
indicator’’s
performance.
Gravity of
destination
C38
Reserved
(Only available
to technician
during
calibration)
C37 = 9.7000 -- 9.9999
(Only available
to technician
during
calibration)
-------
TIP: When in parameter settings
mode, you can move forward through
all parameters and view the settings by
pressing the PRINT (
) key
repeatedly.
14
User’’s Guide | TS-700 MS
Data Output Formats
REMOTE DISPLAY FORMAT
State A
Bits: 0,1,2
0
1
2
1
0
0
0
1
0
1
1
1
0
0
Bits: 3,4
0
0
1
1
0
1
1
0
Decimal point
position
XXXXXX0
XXXXXXX
XXXXX-X
XXXX-XX
XXX-XXX
Division
X1
X2
State B
BITS
FUNCTION
Bits0
Gross = 0, net=1
Bits1
Symbol: positive = 0,negative =1
Bits2
Overload (or under zero)=1
Bits3
Dynamic = 1
Bits4
Unit: lb=0, kg=1
Bits5
Bits6
Constant 1
Constant 0
15
User’’s Guide | TS-700 MS
State C
Bit1
0
0
1
Bit 3
Bit2
0
0
0
Bit0
0
1
0
Bit 4
Bit 5
Bit 6
unit
Kg or lb
g
t
printing=1
Extend
display=1
Constant
1
Constant
0
PC COMPUTER CONTINUOUS SENDING FORMAT
,
S1
,
S2
CR
S3
Data
S1:
Weight status:
ST = standstill
US = not standstill
OL = overload
S2:
Weight mode:
GS = gross mode
NT = net mode
S3:
Weight of positive and negative,
““+”” or ”” ––““
S4:
““kg”” or ““lb””
Data: Weight value, including decimal point
CR:
Carriage return
LF:
Line feed
16
S4
L
F
User’’s Guide | TS-700 MS
SERIAL INTERFACE RECEPTION COMMAND
RS232COM serial interface can receive simple
ASCII command.
Command word and role as follows:
Command
T
Z
P
R
Name
TARE
ZERO
PRINT
G.W/N.W
Function
Save and clear tare
Zero gross weight
Print the weight
Read gross weight or net weight
C
Kg/lb
Kg/lb conversion
G
G.W
Check gross weight at net weight mode
Data Format
Print Format
ID.NO...................004 (Serial No.)
Date: ....................XX.XX. XX (yy.mm.dd)
Time:....................XX.XX.XX (hh.mm.ss)
GROSS................NNNNNN lb/kg
TARE ...................NNNNNN lb/kg
NET .....................NNNNNN lb/kg
17
User’’s Guide | TS-700 MS
Using A Receipt Printer
Print Key
Typical receipt
Cable to Weighing Platform
Printer Connector
To print receipts with an optional printer:
-
With power off, attach the printer
cable to the connector socket on the
underside of the indicator.
-
Power on the printer & indicator.
-
Place weight on the scale and press
the Print key.
-
If receipt does not print, settings may
need to be adjusted in parameters
C18 & C19.
-
To adjust the format of how the date
prints, see options in parameter C30.
18
User’’s Guide | TS-700 MS
Error Codes
ERROR CAUSE
uuuuuu
nnnnnn
SOLUTION
1. Overloaded condition.
2. Wrong connection at
load cell.
3. Load cell has quality
problem.
1. Reduce the weight.
2. Check load cell
connection
3. Inspect load cell.
Check the input
and output.
1. Calibration is incorrect.
2. Bad connections.
3. Load cell has quality
problem.
1. Check scale is
resisted or not, foot
is kept level or not.
2. Check load cell
connection.
3. Check input and
output resistance of
load cell.
Overweight calibration
error.
Incorrect weight input or
incorrect weight on
weighing platform.
1. Input weight
correctly during
calibration.
2. Place correct
weight on weighing
platform.
Underweight calibration
error.
Incorrect weight input or
incorrect weight on
weighing platform.
The calibration
weights Minimum is
10% of Max. cap.
Recommend 60%80% of Max. Cap.
During calibration, the
input signal is negative.
Check all
connections.
Check load cell.
If connections and
load cell are okay,
PCB needs
replacing.
ERR4
During calibration, the
signal is unstable.
After the platform is
stable, start
calibration.
ERR5
Circuitry error
Replace the PCB.
ERR1
ERR2
ERR3
19
User’’s Guide | TS-700 MS
Factory Default Settings
PARAMETER INSTRUCTION
DEFAULT
C01
Calibration
1
C02
Decimal digits
0
C03
Resolution
1
C04
Max. capacity
C05
Empty calibration
0
C06
Capacity calibration
0
C07
Restore default
0
C08
Warning tone
1
C09
Power-off automatically
0
C10
Power saving mode
0
C11
C12
Hold function
Disable kg/lb conversion
0
1
C13
Upper limit alarm
000000
C14
Under limit alarm
000000
C15
Inner code
----
C16
Date setting
----
C17
Time setting
----
C18
C19
Serial interface data
output
Serial interface Baud rate
C20
Zero manually
10
C21
Initial zero
10
C22
Zero tracking range
0
20
10000
0
3(9600)
User’’s Guide | TS-700 MS
C23
Zero tracking time
C24
C25
C26
C27
C28
C29
C30
C31
C32
C33
C34
C35
C36
C37
C38
C39
Overload range
Negative range
Standstill time
Standstill range
Dynamic filter
Noise filter
Print format
Analog signal options
4~20mA testing
Relay output setting
Reserved
Reserved
Calibration location gravity
Destination gravity
Version No. check
Reserved menu
21
1
9
10
1
2
0
2
0
1
4
1
0
6
9.7936
9.7936
-------
Triner Scale & Manufacturing Co. Inc.
8411 Hacks Cross Road
Olive Branch, MS 38654
(800) 238-0152
www.trinerscale.com