Power Units - Digital Low Res

Monode
Power UnitsDigital
• Easy to use for hand marking
• Operator lock out on file changes
• Surface and deep etch marking
• Ready for semi-automatic marking
• Programmable Etching Parameters
• AC or DC power output 6-22 Volts
• Monode technical support
9200 Tyler Boulevard • Mentor, OH 44060 • Phone: (440) 975-8802 • Fax: (440) 975-1364
Email: [email protected] • www.monode.com
M-450
Programmable Digital
Power Unit
• Easy to use for hand marking
• Surface marking or deep etch with AC or DC
current
• Ten program files to save different etch
parameters
• Programmable power and pulse settings
• Semi-automatic marking with the AM25
Capable of marking safe, legible and most importanlty low stress, the M-450 has
the pinnacle of production capability.
M-550
Programmable Digital
Deep Etch Power Unit
Monode AM 25
• Easy to use for hand marking
• Save specific etch parameters in ten
convenient files
• Program files with AC or DC current and/or
DC to AC current
• Capable of marking more than .006 inch
deep in most substarates
• Control power and pulse settings
• Semi-automatic marking with the AM25
Conforming to MIL STD 130 and DOD UID requirments the M-550 sets a new
standard for hand marking.
MBG
Basic Marking Kit
First choose your power unit:
Kit includes:
Stencil Cleaning Tray
Monode ElectrolyteMSC 4
and
APC Neutralizer
Bench Fixture B2045
Holder for Hand MarkerH100
½ x 1½ Hand Marker 50150
DE Pads for Hand MarkerDE 50150
3-Wire Cort Set#300
Hand GroundHG
Shallow Etching Vs. Deep Etching
Shallow Etching
• Approximately .001 to .0001 of an inch deep
• Mark is typically produced in less than a second
• Impression is dark in color
Deep Etching
• .001 - .003 inches deep
• If etches greater than .003 inches are required a pulsating power unit with
timer is recommened