NSL Aerospace - NSL1422RC Airline PMA Approval Packet

Transcription

NSL1422RC
NSL1422RC Class A & B
Aircraft Rapid Cure Integral Fuel Tank Sealant
PMA Approval Packet
Contents:
FAA PMA Supplement: Page 2
Class A TDS: Page 35
Class B TDS: Page 36
Class A MSDS: Page 37
Class B MSDS: Page 41
PMA Cross Reference Chart: Page 45
(800) 527.0011
www.nslaerospace.com
This document contains proprietary information and is not to be transmitted, reproduced or disclosed to anyone without written permission of NSL Aerospace.
FEDERAL AVIATION ADMINISTRATION - PARTS MANUFACTURER APPROVAL PMA No.: .:.P~Q.:;:;38~8:::;6C~E~_ _ __
Supplement No.: .:;2::;.8. :.;R:;;.ev:...:..:,1_ _ _ _ __
Date: March 23, 20 I I
Aerospace Sealants
4 Plum Court
Sleepy Hollow, IL 60118
(847) 428-5610
Part Name
Part
Number
Approved
Replacement For
Part Number
Approval Basis and
Approved Design Data
Make EliglbUity
Sealant
NSLl440RC
B2
PRC-DeSoto Sealant
Pro Seal 1440 B2
Test and Computation per
14CfR § 21.303
Product Analysis Renort:
PARS030
Airbus
A300, Model B2-622,
A318 Model-III,
A318 Model-I 12,
A318 Model-121,
A318 Model-Ill,
A319 Model-III,
A319 Model-112,
A319 Model-I 13.
A319 Model-I 14,
A319 Model-115,
A319 Model-131,
AJI9 Model-132,
A319 Model-133,
A3l0 Model-III,
A320 Model -211,
AJ20 Model -232,
A320 Model -233,
AJ21 Model-III,
A321 Model-l 12,
A321 Model-DI.
Al21 Model-21l,
A321 Model-212,
Al21 Model-213,
A321 Model -232,
A330-201, A330-202,
A330-203, A330-223,
A330-243, A330-303,
A330-302, A330-32I,
A330-322, A330-323.
A330-34I , A330-342.
A330-343,
A340-211. -212, -213,
A340-311,-312.-313,
A340-54I, A340-642,
A3S0-841, A3SO-S42.
;\380-861
Same as above
ATR
ATR42-200, ATR42-300,
ATR42-320, ATR42-500,
ATR72-101. ATRn-201,
ATR72-102, ATR72-202,
ATR72-211, ATR72-212,
ATR72-212A
14 CfR § 21.303
Product Analysis Report
PAR8030
CFM International,
SA
CFM56-2, CfM56-2A,
CFM56-2B, CfM56-3,
CFM56-3B, CfM56-3C,
CfM56-5, CfM56-5-AIIF,
CFM56-5A3, CFM56-5A4
Rev: A
Date: 12-26-09 or later
F AA~approved revisions
Same as above
Same as above
Sealant
NSL1422RC
A~'1.
Same as above
PRC~DeSoto
PR-1422 A'/,
Sealant
Rev: A
FAA-approved revisions
54i93
Model EUgibUity
n-:m-:il.ALAYIAIIQ.N ADMINISTRATION -PARTS MANUFACTURER APPROVAL
PMA No.: ..;.,P,;:.Q;;;,;38;;;;8,;;;6C;;;,;E::.,'_ _ _ __
Supplement No.: ~2~8.::.;R;;,ev;';"":,1,.....".,,...,...,..-_ __
Date: March 23,2011
Aerospace Sealants
4 Plum Court
(847) 428-5610
Part Name
Part
Number
Approved
Replacement For
Part Number
Approval Basis and
Make Eligibility
Sealant
NSLI422RC
AYl
PRC-DeSoto Sealant
PR-1422 AY.
CFM International,
SA
14 CFR § 21.303
Product Analysis Report:
PAR8030
~A
FAA~approved revisions
55193 Model Eligibility
CFMS6-SA4/F,
CFMS6-SAS,
CFMS6-SASi6,
CFMS6-SBI.
CFMS6-SBI/3,
CFMS6-5B2iP,
CFMS6-SB4/3,
CFM56-5B3i2P.
CFMS6-5B4/PI.
CFM56-5B5iP.
CFMS6-5B7,
Cf'M56-5B7i3,
CFM56-5C2,
CFM56-5CliG,
CFM56-5C3IF4,
CFM56-5C4,
CFM56-SBIIP,
CFM56-5B2I3,
CFM56-5B2/2P
CFM56·5B413BI,
CFM56-5B3/2PI,
CFM5!i-SB4I2P,
CFMS6·5B6.
CFM56-5B7IP,
CFM56·5B813,
CFM56·SC214,
CFM56- 5C2/G4,
CFMS6-5C3IG,
CFM56-5C4iP,
CFM56-5BI12P,
CFM56-5B313.
CFM56-5B3/P,
CFM56.5B513,
CFM56·5B4,
CFM56·5B4I2PI,
CFM56-SB8/P,
CFM56.5B913,
CFM56-SC2Ir.
CFM56-SCliP,
CFM56-5C3IG4,
CFM56-5C4il,
CFM56·5B2,
CFM56-5B3I3BI,
CFM56·5B3iPI,
CFM56·5B613,
CFMS6-SB4iP,
CFM56-SB5,
CFM56·5B6/2P,
CFM56·5B9iP ,
CFM56·5B9/2P
FEDERAL AVIATION ADMINISTRATION PARTS MANUFACTURER APPROVAL PMA No.: .::PQ
:s:3:;;8:::,86::;:C;;:;E:...-_ _ __
Supplement No.: 28 Rev. 1
Date: ":'M-=-a--rc"":-h-=2:':::3-,2:":0:-:"1":'1--
Aerospace Sealants
4 Plum Court
(847) 428-5610
Part Name
Part
Number
Approved
Repl"..ment For
Part Number
Approval Basis and
Make Eligibility
Sealant
NSLl422RC
AI>
PRC-DeSoto Sealant
PR-I4422 AI>
14 CFR § 21303
Product Analv~j§: Re~rt:
PAR80JO
Rev: A
~ 12-26-09 or later
CFM Intemationa',
SA
Model Eligibility
CFM56-SC2IF4,
CFMS6-SC3/F.
CFMS6-SC3lP.
CFMS6-5C411 P,
CFMS6-7B20,
CFM56·7B22,
CFM56-7B221J,
CFM56-7B24.
CFM56-7B24!3,
CFMS6-7B26,
CFMS6-7B26!lB I,
CFMS6-7B27,
CFMS6-7B27/J,
CFM56-7827!81,
CFM56·7827!3BI.
CFM56·78271JBIF,
CFM56-71120IJ,
CFMS6-7B2012,
CFMS6-782212,
CFM56-7B2213B I,
CFM56-7B2412,
CFM56·7B24/381,
CFM56-71126/2
CFMS6· 78261382F,
CFM56-7827A,
CFM56·7B27/3F,
CFM56·7827/83,
CFMS6·7B271383,
CFM55-7B22/11I.
CFM56-7B?AIB I,
CFM56-7B2613.
CFM56-7B26il! I.
CFM56-7112613F.
CFM56·7B261B2,
CFM56-7B2613B2,
CFMS6-7B2712,
CFM56·7B27All,
CFMS6-SC2,
CFM56-SC2IG,
CFMS6-5C3/F4
Same as above
Same as above
Same as above
Same as above
56/93
Boeing
727 Series, 727-100 Senes,
727C Series,
727-IOOC Series,
727-200 Series
FEDERAL AVIATION ADMINISTRATION PARTS MANUFACTURER APPROVAL PMANo.:
Supplement No.:
Date:
Aerospace Sealants
4 PJumCourt
(847) 428-5610
Part Name
Part
Number
Approved
Replacement For
Part Number
Approval Basis and
Approved Design Dala
Make Eligibility
Sealant
NSLI422RC
PRC-DeSoto Sealant
PR-I4422 A';'
14 CPR § 21.303
Boeing
AYl
Eroduct Analysis
~eport:
PAR8030
Rev; A
Q.t.: 12-26-09 or later
PQ3886CE
28 Rev. I
March 23, 2011
Model Eligibilily
727-100F Series,
737-100 Series,
737-200 Series,
737-20OC Series,
737-300 Series,
737-400 Series,
737-500 Series,
737-600 Series,
737-700 Series,
737-800 Series,
737-900 Series,
737-900ER Series,
747-100 Series,
747-2ooB Series,
747-2ooF Series,
747·2OOC Series,
747SR Series,
747SP Series,
747-IOOB Series,
747-300 Series,
747-1008 SUD Series,
747-400 Series.,
747-4ooD Series,
747-400F Series,
757-200 Senes,
757-200PF Series,
7S7-100cB Series,
757-300 Series,
767-200 Sene"
767-300 Series,
767-300F Series,
767-4ooER Series
777-200 Senes,
777-300 Series,
777·JOOER Series.
777-2ooLR Series,
777F Series
Same as above
Same as above
Same as above
Same as above
57/93
Bombardier Inc,
BD-100-IAI0,
BD-700-IAIO,
BD-7oo-IAII,
CL-215-6AIO,
CL-215-6BII (CL-21ST
Variant)
FEDERAL AVIATIaN ADMINISTRATIaN - PARTS MANUFACTURER APPRaVAL
PMA No.: .:..P~Q3~8~86C=E:...-_ _ __
Supplement No.: 28 Rev. I
Date: 7M':"a-rc"7h-::2:::3-,2:::0:-:'1\7- -
Aerospace Sealants
4 Plum Court
(847) 428-5610
Part Name
Part
Number
Approved
Replacement For
Part Number
Approval Basis and
Make Eligibility
Sealant
NSLl422RC
Alit
PRC-DeSoto Sealant
PR-I4422 AY, Test and Computation per
14 CFR § 21303
Product Analysis R~ort:
PAR8030
Bombardier In(:.
CL-2JS-6BJ J (CL-4IS Variant), CL-600-J-AII (CL-600). CL-600-1A J 2 (CL-601-3A Variant). CL-6oo-2BI6 (CL-600-3R Variant), CL-600-2B 16 (CL-604 Variant), CL-600-2BJ9 (Regional Jel Series 100 & 440), CL-600-1CIO (Regional Jet Series 700, 70 I & 702), CL-600-2DI5 (Regional Jel Series 705), CL-6oo-2D24 (Regional Jot Series 900), DHC·B·loo Series, DHC-8·2oo Series, DHC-8·3oo Series, DHC-B-400 Series Pratt & Whitney
JTJ 5D-I, JTI5D-1 A, JTI 5D-IB, JTI5D-4. JTISD-4Il, JTI5D-4C, JTISD·4D, JTJ5D-S, JTlSD-5A, JTI SO-SB, JTJ5D-5C. JTI5D-5F, JTJ5D·SR. JT15D.5D, PTM-6. PT6A-6A, PT6A-6B, PT6A·fiJC20. PT6A·1 J, PT6A·IIAG, PT6A-15AG, PT6A-20, PT6A·20A, PT6A·20B, PT6A-25, PT6A-25A, PT6A-2SC, PT6A·27, PT6A·2B, PT6A·29, PT6A-34, PT6A-34D, PT6A-34AG, PT6A·J5, PT6A-J6, PT6A-38, PT6A-40, PT6A-41, PT6A-41AG, PT6A-42, PT6A-42A, PT6A-45, PT6A-45A, PT6A·45B, PT6A-45R, PT6A·SO, PT6A·60, PT6A-60A, PT6A-60AG, PT6A-61 PT6A-6 I A, PT6A-65B, PT6A-65R, PT6A-65AR, PT6A-65AG, PT6A-110 ~A
Same as above
Same as above
Same as above
Same as above:
FEDERAL AVIATION ADMfNISTRAnON
PARTS MANUFACTURER APPROVAL
PMA No.: ,:,P.::lQ;;;,38::.;8;;:,6C;;;,E::...._ _ __
Supplement No.: .:2;;.8.:;R::,ev:..;..;.1__.----
Date: March 23, 2011
Aerospace Sealants
4 Plum Court
(847) 428-5610
Part Name
Part
Number
Approved
Replacement For
Part Number
Approval Basis and
Make Eligibility
Sealant NSLl422RC
Nil
PRC·DeSoto Sealant
PR-I4422 AV,
14 CFR § 21.303
Pratt & Whitney
PAR8030
Rev: A
Date: 12·26·09 or later
59/93
Model Eligibility
PT6A-112, PT6A-114,
PT6A-114A, PT6A-114A.
PT6A-116, PT6A-121,
PTGA-135, PT6A-135A,
PT6A-52, PT6A-6G,
PTGA·66A, PT6A-67,
PTGA-67 A, PT6A-G7 AF.
PTGA-67P, PT6A-G7B,
PT6A-67D, PT6A-64,
PT6A-66B, PT6A-68,
PT6A-67AG, PT6A-67T,
PT6A-66D, PT6A-67F,
PTGB-36, PT6B-36A,
PT6B-36B, PT6B-37,
PT6B-37A,
PT6C-67D, PT6C-67C,
PT6T-3, PT6T-3A,
PT6T-3B, PT6T-3BG,
PT6T·3BE, PT6T·6,
PT6T-3D, PT6T-9,
PT6T-3DE, PT6T·3DF,
PT6T-3BF,
PW118, PWI18A,
PWI18B, PWI19B,
PWI19C, PW120,
PWIZOA, PW121,
PWI21A, PW123,
PWIZ3AF, PW123B,
PWI23C, PWI23D,
PW123E, PW124B,
PWI25B,PWI26A,
PW127. PW127E,
PWI27F, PW127G,
PW127M, PWI5!lA,
PW20fiA, PWZ06B,
PW206B2, PW206C,
PW206E, PW207C,
PW207D, PW207DI,
PW207D2,
PW305, PW305A,
PW305B, PW306A,
PW306B, PWJ06C,
PW307A, PW308A,
PW308C, PW530A,
PW535A, PW535B,
PW545A, PW545B
PW545C, PW610f-A,
PW617F-E. PW61SF-A,
PW203 7, PW2037M.
PW2040, PW2043,
PW2240, PW2143
FEDERAL AVIATION ADMINISTRATION PARTS MA.."JUFACTURER APPROVAL
PMANo.: PQ3886CE
Aerospace Sealants
4 Plum Court
(847) 428-5610
Part Name
Sealant
Part
Number
Approved
Replacement For
Part lSumber
Approval B.sis and
Approved Design Dat.
Make Eligibility
NSLl422RC
PRC·DeSeto Sealant
PR·I4422 AYi
14 CFR §2 1.303
P[QQYC! Anal~sis RCQQrt:
Frau & Whitney
PW2643, PW2040D,
PW2337, PW2037D,
FI17·PW·IOO,
JFTDI2A4A,
JFTDI2A·5A, JT8D·208,
JT8D·217, JT8D·217 A,
JT8D· 217C, JT8D· 21 1),
JT9D·3A, JT9D·7.
JT9D·7H. JT9D·7A,
JT9D·7AH,JT9D·7F,
JT9D·20. JT9D·7J,
JT9D·20J, JT9D·59A,
JT9D·7Q3, JT9D·7R4E,
JT9D·7R4HI, JT9D·70A,
JT9D· 7R4D, JT9D· 7R4EI,
JT9D·7R4E4, JT9D· 7Q,
JT9[).7R4D J.
JT9D·7R4G2.
PW40S0, PW4052.
PW4056, PW4060,
PW4060A, PW4060C,
PW4062,PW4062A,
PW4 J S2, PW4156,
PW4156A, PW4158,
PW4J60, PW4460,
PW4462. PW4650,
PW4074, PW4077,
PW4077D, PW4084,
PW4084D, PW4090,
PW409()"3, PW4074D,
PW4090D, PW4098,
PW4164, PW4168,
PW4168A, PW4IMC,
PW4164CIB, PW4170,
PW416BA·JD.
PW4168·ID, PW4IM·ID,
PW4164C·ID,
PW4164C/B·ID,
PW6122A,f'W6124A
Airbus
A300, Model B2·1 A,
A300, Model B2-1 C,
A300, Model B4·2C,
A300, Model B2K.3C,
A300, Model 84·103,
A300, Model B2·203,
A310, Model 204,
A31O, Model 221 ,
A310, Model 222
AYz
PAR8030
Rey:A
[late: 12·26·09 or later
Same as above
Same as above
Same as above
Same as above
60/93 Model Eligibility
FEDERAL AVIATION ADMINISTRATION - PARTS MANUFACT1JRER APPROVAL PMA No.: ~P.;,;Q.::.;38::.:;8::::6C::::E::.-_ _ __
Aerospace Sealants
4 Plum Court
(847) 428-5610
Pari Name
Part
Number
Date: 7M7a-rc-:h-2:::3=-,-=270:-jj:----
Approved
Repla~em~nt
For
Approval Basis and
rartNumber
Sealant
NSLl422RC
AVa
Make Eligibility
Model Eligibility
7 .=-rb=u=s- ----A3=I"O',M=od"'e712:VO
PRC-DeSoto s.,C:-a1"'a=n""'--;T"'e-=st=an=d=C=om=p=u=t.=ti=0=n=pe=r--A
"3-,- - PR-I4422AY,
14CFR§2L303
A310, Model 322,
AlIO, Model 324,
PAR8030
A310, Model 304,
Rev: A
AlIO, Model 325,
Date: 12-26·09 or later
A300, Model 84-60 I,
FAA,approved revisions
A300, Model 64-603,
A300, Model 64.620,
AJOD, Model B4-60SR,
AlOO. Model 84-622R,
A30D, Model F4-605R,
AJOO, Model F4-622R.
A300. Model C4-605R
Variant F,
A300. Model 62·622,
A318 Model-Ill,
A318 Model-I 12,
A318 Model-121,
All8 Model-122.
A319 Model-III,
AJI9 Model-Ill,
A319 Model-ll3,
AJ 19 Model-114,
A319 Model-lIS.
AJI9 Model-IJI,
A319 Model -132,
AJI9 Model-133.
A320 Model-III,
A320 Model -211,
AnO Model -232,
A320 Model -233,
A321 Model-III,
Al21 Model-112,
A321 Model-13I,
A32! Model-211,
A32! Model-212,
Al21 Model-21},
A321 Model -232,
A330-201, A330-202.
A330-203, A330-223.
A330-243, A330-30}.
A330-302, A330-32I ,
A330-322, A330-323,
A330-341, AlJO-342,
A330-343,
A340-211, -212, -213,
A340-311. -312. -313.
A340-541. A340-642.
A380-841, A380-842.
A380-86I
61193 FEDERAL AVIATION ADMINISTRATION
PARTS MANUFACTURER APPROVAL PMA No.: .:.P;:1Q;::38:;;:86C=E:....-_ _ __
Supplement No.: .; .2.;. 8.;. R;.;.ev,.;. ,.;.I_ _ _ _ __
Aerospace Sealants
4 Plum Court
(847) 428-5610
Part Name
Part
Number
Approved
Replacement For
Part Number
Approval Basis and
Make Eligibility
Model Eligibility
Sealant
NSLl422RC
PRC-DeSoto Sealant
PR-I4422 Ail,
14 CFR § 21.303
PAR8030
ATR
ATR42·200. ATR42·300,
ATR42-320, ATR42·500,
ATR72-IOI. ATR72·201,
ATR72-I02, ATR72-202,
ATR72-211, ATR72-212,
ATR72-212A
AYl
Rev: A
Same as above
Same as above
Same as above
Same as above
McDonnell Douglas DC-S-II, DC-8-12,
DC-8-21, DC-S-31,
DC-S-32, DC-8-33,
DC-8-41, DC-S-42,
DC-8-43, DC-8-51,
DC-8-52, DC·8·53,
DC·8F-54, DC·SF·55,
DC·8-55,DC-8-61,
DC-8-6IF,DC-8-62,
DC-8-62F,DC-8-63,
DC-8-63F,DC-8-71,
DC-8-7IF,OC-8-72,
DC·8-72F, DC·g·73,
DC-8·73F
MD·II, MD-IIF
Same as above
Same as above
Some
Same us above
Lockheed Sealant
NSLI422RC
A2
PRC-DeSoto S.alanl
PR~1422 A2
Test and Computation pcr
14 CFR 21.303
Product Analysis Rep0r:!:
PARBOlO l!.m:;. A
CFM Imemational,
SA
liS
above
*
FAA-approvcd revisions L-IOII-385-1,
L-IOII-385-1-14,
L-IOII-38S-I-IS,
L·I011·385·3
CFMS6-2, CFMS6-2A,
CFM56-2B, CFM56·3,
CFM56-3B, CFM56-3C,
CFM56-5, CFM56-5-Al/F,
CFM56-5A3, CFM56-5A4,
CfM56-5A4/f,
CFM56-5A5,
CFM56-5A516,
CfM56-5BI,
CFM56-5B1I3,
CFM56-5B2/P,
CfM56-5B413,
CFM56-5B3I2P,
CFM56-5B41P1,
CFM56-5B5IP,
CFM56-5B7,
CFM56-5B713
62/93
FEDERAL AVIATION ADMINISTRATION - PARTS M&"lUFACTURER APPROVAL
PMA No.: ,;.P.::\Q;;,:38:.:;8;:;6C;::E:.-_ _ __
Supplement No.: .:2,;:.8..:;R::.ev:;,...;.1_ _ _ _ __
Aerospace Sealants
4 Plum Court
(847) 428-5610
Pari Name
Part
Number
Approved
Replacement For
Part Number
Approval Basis and
Sealant
NSLl422RC
A2
PRC·DeSolo Sealant
PR·1422 A2
14 CFR § 21303
Product Analysis .Report:
PAR8030
Rtl;. A
FAA~approved reVIsions
63193 Make Eligibility
cn! International.
SA
Model Eligibility
CFM56·5C2,
CFM56-5C2IG.
CFM56·5C3/F4,
CFM56·5C4,
CFM56·5BIIP,
CFM56-5B213.
CFM56·5B2/2P.
CFM56·5B4/3BI,
CFM56·5B312P I,
CFM56·5B4/2P,
CFM56·5B6,
CFM56-5B71P,
CFM56·5B8I3,
CFM56·5C2I4,
CFM56·5C2IG4,
CFM56·5C3/G,
CFM56·5C4!P,
CFM56-SBII2P.
CFM56·5B313,
CFM56-5B3IP,
CFM56·5B5!3,
CFM56·5B4,
CFM56·5B4I2Pl,
CFM56·SB81P,
CFM56-5B9I3,
CFM56-SC2IF,
CFM56·5C2/P,
CFM56·5C3/G4,
CFM56-5C411,
CFMS6·SIl2,
CFM56·5B3/.3BI,
CFM56-SB3iP I,
CFM5(,.,5B6/3,
CFM56-5B4/P.
CFM56·5B5,
CFM56-5B6I2P,
CFM56·5B9IP,
CFM56·5B9I2P,
CFMS6·5C2IF4,
CFM56-SC3IF,
CFM56-5C31P,
CFM56·5C4/IP,
CFM56-7B20,
CFM56·7B22,
CFM56·7B2213,
CFM56·7824,
CFM56·7B2413,
CFM56·7826,
CFM56·7B26/3BI,
CFM56-7B27
FED/:!RALAVIA TIO"NffiMINISTRA TION
PARTS MANUF~C1llREILMPROYAL
PMA No.: _PQ..:..3;..;;8_86o...;C~.E_ _ _ __
~~~~~----Date: March 23, 2011
Aerospace Sealants
4 Plum Court
(847) 428-5610
Pari Name Pari
Number
Approved
Replacement For
Part Number
Approval Basis and
NSLl422RC .
A2
PRC·DeSoto Sealant
PR·1422 A2
Test~an(rCOmputation
Make Eligibility
per----CFM- International.
14 CFR § 21.303
SA
product Analysis1l.@!t
PAR8030
Rev: A
Date: 12-26-09 or laler
Model Eligibility
-CFM56~-7B-27f-3,---~-
CFM56-7B27/BI,
CFM56·7B27/3BI,
CFM56·7B2713BIF,
CFM56-7B2013,
CFM56· 7B2012,
CfM56-7B2212,
CFM56· 7B2213B I,
CFM56· 7B2412,
CFM56· 7B2413BI,
CFM56-7B2612,
CFM56· 7B26/JB2F,
CFM56·7B27A,
CFM56·7B2713F,
CFM56·7B271B3,
CFM56·7B2713B3,
CFM56-7B22IBI,
CFM56-7B241BI,
CFM56-7B26/3,
CFM56-7B26/B I,
CFM56-7 B26/3F,
CFM56·7B26/B2,
CFM56-7B26/3B2,
CFM56-7B27/2,
CFM56-7B27 Al3,
CFM56-5C2,
CFM56-5C2/G,
CFM56-5C3/F4
Same as above
Same as above
Same as above
Same as above
64193 Boeing
727 Series, 727-100 Series,
727C Series,
727·1OOC Series,
727-200 Series.
727-2ooF Series,
737-100 Series,
737-200 Series,
737·2OOC Series,
737-300 Series,
737-400 Series,
737-500 Series,
737-600 Series,
737-700 Series,
737-800 Series,
737-900 Series,
737·9OOER Series,
747-100 Series.
747·200B Series,
747-2ooF Series,
747-20OC Series,
747SR Series,
747SP Series
FEDERAL AVIATION ADMINISTRAnON
Aerospace Sealants
4 Plum Court
(847) 428-5610
PMANo.:
Supplement No.:
Date:
Pari Name
Pari
Number
Approved
Replacemeol For
Pari Number
Approval Basis and
Sealant
NSLI422RC
A2
PRC-DeSoto Sealant
PR-1422 A2
Make Eligibility
Same as above
Same as above
March 23, 20 II
Model Eligibility
747-1ooB Series,
747-300 Sertes,
747-100B SUD Series,
747-400 Series,
747-400D Series.
747-400F Series,
757-200 Series,
757-200PF Series,
757-2ooCB Series,
757-300 Series,
767-200 Series,
767-300 Series,
767-3OOF Series,
767-400ER Series,
777-200 Series,
777~3oo Series,
777-300ER Series,
777-200LR Series
777F Series
Bombardier Inc.
BD-I OQ.-I A 10,
BD-700-1 A 10,
BD-70Q.-1 A II,
CL-2IS-MI0,
CL-2IS-6BII (CL-2IST
Variantl.
CL-2IS-6BII (CL-415
Variant),
CL-600-1-AII (C[A,{j{).
CL-600-1AI2 (Cl.601-3A
Variant),
CL~600-2Bt6 (CL-600-3R
PAR8030
Rev: A
fAA-approved revisions
Same as above
28 Rev. 1
Boeing
14 CFR § 21.303
Product Anilh:sis Regort:
Same as above
PQ3886CE
Variant),
CL-600-2B 16 (CL-004
Variant),
CL-600·2BI9 (Regional Jer
Series I no & 440),
CL-000-2C 10 (Regional Jet
Series 100, 701 & 702),
CL-600-2D1S (Regional iet
Series 70S),
Clr600-2D24 (Regional Jet
Series 900),
DHC·8-100 Series,
DHC-8-200 Sen.s,
DHC-8-300 Series.
DHC-8-400 Series
Same as above
Same as above
Same as above
Same as above
65193 Pratt & Whitney
JTI5D-I, 1T15D-1 A,
iTlSD-I B, JTlSD-4
FEDERAL A VIATION ADMINISTRATION - PARIS MANUFACNBllR APJ'~ROV AL
Aerospace Sealants
PMA No.:
Supplement No.:
4 Plum Court
Sealant
Part
Number
~~- NSLJ422RC
A2
28 Rev. 1
Date: -:-M-:-a;;"rc":'h-:2~3~,2:":0':":1':"1- -
(847) 428-5610
Part Name
~P.::Q;;.;38;,;;8_6C;;.:E=--_ _ __
Approved
Replacement For
Part Number
PRC~DeSoto··Seal~~
PR-1422 A2
Approval Basis and
per
Test andComputation
14 CFR § 21.303
fu?du~t Analysis Report:
PARa030
Rev: A
Date:
f
12-26~09
AA~approved
or later revisions 66193 Make Eligibility
Pratt & Whitney
Model Eligibility
1TI5D-4B, JTI5D-4C,
JTI5D-4D, JTI5I).S,
JTI SD-SA, JTISI).SB,
H1SD-SC, JT\5D-SF,
HI5D-SR, H15O-5O,
PT6A-6, PTGA-6A,
PTGA-GB, PT6A-GIC20,
PTGA·II, PTGA·II AG,
PT6A·ISAG, PT6A-20,
PT6A·20A, PT6A·20B,
PT6A·25, PT6A-25A,
PT6A-25C, PT6A·27,
PTM-28, PT6A·29,
PTGA-34, PT6A·34B,
PT6A-34AG, PTM-35,
PT6A·36, PT6A-38,
PTM-40, PT6A-41,
PTM-41AG, PT6A-42,
PT6A-42A, PTM·4S,
PTGA-4SA, PT6A-4SB,
PT6A-4SR, PT6A-SO,
PTGA·60, PTGA-60A,
PT6A-60AO, PTGA·fil,
PT6A-61 A, PT6A-GSB,
PT6A-65R, PT6A·65AR,
PTM·65AO, PTGA·IIO,
PTGA·112, PT6A·114,
PT6A·114A, PT6A·114A,
PTM-116, PT6A-lll,
PTGA-135, PT6A-135A,
PTM·52, PT6A·66,
PT6A·66A, PT6A-67,
PT6A-57 A, PT6A·67 AF,
PT6A·67P, PT6A·67B,
PT6A-67D, PTM·64,
PT6A·66B, PT6A·68,
PTM·67 AO, PT6A·67T,
PT6A·MD, PT6A-6?f,
PTGB·36, PT6B-36A,
PT6B·3GB, PT6B·3?,
PT6B·37A,
PT6C·67D, PT6C·67C,
PT6T·3, PT6T·3A,
PT6T·3B, PT6T·3BO,
PT6T·3BE, PT6T·6,
PT6T·3D, PT6T-9,
PT6T·3DE, PT6T·3DF,
PT6T·3BF,
PWII8,PWI18A,
PWI18B, PWI19B,
PWII9C,PWI20,
PWIZOA, PWl21
FEDERAL AVIATION ADMINISTRATION - PARTS MANUFACTURER APPROVAL PMA No.: ":-P.;>.Q"'38;,;;8"'6C:;;:E::-_ _ __
~~~:-:-:-:--
Aerospace Sealants
4 Plum Court
(847) 428-56lO
ParI Name
Part
Number
Approved
Replacement For
Part Number
Approval Basis and
Make Eligibility
Sealant
NSL!422RC
A2
PRC-DeSoto Sealant
PR-1422 A2 Test and Computation per
14 CFR § 21.303
Pratt & \Vhttney
proQ!lct Analysis Report:
PAR8030
Rey; A
Date; 12-26-09 or later
67/93
Model Eligibility
PW121A,PWI23,
PWI23AF. PWI23B,
PWI23C, PWI23D,
PWI23E. PWI24B,
PWI25B, PWI26A,
PWI27, PWI27E,
PW I 27F, PW 1270,
PWI27M, PWI50A,
PW206A, PW206B,
PW206B2, PW206C,
PW206E, PW207C,
PW207D, PW207DI,
PW207D2,
PW305, PW305A,
PW305B. PW306A,
PW306B, PW306C,
PW307A, PW30SA,
PW308C, PW530A,
PW535A, PW535B,
PW54SA, PW545B.
PW545C, PW61 OF-A.
PW617F-E, PW6ISF-A,
PW2037, PW2037M,
PW2040, PW2043,
PW2240, PW2143,
PW2643, PW2040D,
PW2337, PW2037D,
FI17-PW·loo,
JFTDI2A·4A,
JFTDI2A-SA, JT8D-20S,
JT8D·217, JT8D-217A,
JTSD-217C, JT8D-219,
JT9D-3A, JT9D-7,
JT9D-7H, JT9D-7A,
JT9D-7AH, JT9D-7F,
JT'1D-20, JT9D-71,
JT9D·20J, JT9D·59A.
JT9D-7Q3, JT9D-7R4E,
JT9D-1R4H I, JT9D-70A,
JT9D-1R4D, JT9D-7R4E I,
JT9D-7R4E4, JT9D-1Q.
JT9D-7R4D I,
JT9D- 7R401,
PW4050, PW4052,
PW4056, PW4060,
PW4060A, PW406OC.
PW4062,PW4062A,
PW4152, PW4156,
PW4156A,PW4158
FEDERAL AVIATION ADMINISTRATION - PARTS MANUFACTURER APPROVAL PMA No.: -::P7'Q":'38;.;;8.:..6C:;,;;E'--_ _ __
Date; -:-M-=-ar-c-=h-:2:O:3-,~20:-:1-:1---
Aerospace Sealants
4 Plum Court
(847) 428-5610
Part Name
Part
Number
Approved
Replacement For
Part Number
Approval Basis and
Make Eligibility
Scalant
NSLl422RC
A2
PRe-DeSoto Sealant
14 CFR § 21.303
Product Analysis Report
Pratt & \Vhitney
PW4160, PW4460.
PW4462, PW4650,
PW4074. PW4077,
PW4077D, PW4084,
PW4084D, PW4090,
PW4090-3, PW4074D,
PW4090D, PW4098,
PW4J64, PW4168,
PW4168A. PW4164C.
PW4164C/B. PW4170,
PW4168A-ID,
PW4168-1D, PW4164-ID,
PW4164C-ID,
PW4164C/B·ID,
PW6122A, PW6124A
PR-1422 A2
PAR8030
.!k\::A
Date: J 2-26-09 or later
Model Eligibility
Same as above
Same as above
Same as above
Same as above
Embraer
EMB-IIOPI, EMB-IIOP2,
EMIl·145, EMB-145BR,
EMB-145MR,
EMB-145LR, EMB-135 ER,
EMB-13SLR, EMB-135EK,
EMB-135KL, EMB-13SBJ,
EMB-145XR,
EMB-145MP, EMB-14SEP
EMB-1ZO, EMB-llORT,
EMB·l ZOER, EMIl-120FC,
EMil· 1ZOQC,
EMIl·SOO, EMB-5US,
ER) 170-100STD,
ER) I 70-100 LR,
ERJ 170·100SU,
ERJ 17()'100 SE,
ER) 170·200 STD,
ERJ 170-200 LR.
ERJ 17()'200 SUo
ERJ 190-100 STD.
ER) 190·100 LR,
ERJ 190-100 IGW,
ERJ 190-100 Eel,
ERJ 190-200 STD,
ER) 190·200 LR,
ERJ 190·200 IGW
Same as above
Same as above
Same as above
Same as above
Airbus
A300,
A300,
A3oo.
A300,
A300,
A3oo,
68/93 Model
Model
Model
Model
Model
Model
132-1 A,
H2-IC,
B4·2C,
B2K-3C,
84·103,
82-203
FEDERAL AVIAnON ADMINISTRATION
PMA No.: .;;.P.;:.Q::.;38;,;;8.;;.6C;;;.;E"--_ _ __
-:::-:~~~--
Aerospace Sealants
4 Plum Court
(847) 428-5610
Part Name
Part
Number
Approved
Replacement For
Part Number
Approval Basis and
Sealant
NSLl422RC
A2
PRC-DeSoto Sealant
PR-1422 A2
14 CFR §2U03
Product Analysis Renart:
PAR8030
Rev: A
Date: 12-26-(19 or later
69/93
Make Eligibility
Airbus
Model Eligibility
A31O. Model 204,
A31O, Model 221,
A31O, Model 222,
A310, Model 203,
AlIO, Model 322,
A31O, Model 324,
A31O, Model 304,
A310, Mode1325,
A300, Model 64-60 I,
AlOO, Model 64-603,
A300, Model 64-620,
A300, Model 64-605R,
AlOO, Model 64-622R,
AlOO, Model F4-605R,
A300, Model F4-622R,
A300, Model C4-605R
Variant F,
A300, Model 82-622,
A318 Model-I II,
A318 Model-I 12,
A31B Model -121,
A318 Model-ll2,
All9 Model-III,
A319Model-IIZ,
A319 ModeJ -113,
A319 Model-1l4,
AlI9Model-115,
A319 Model-l3l,
A319Model-132,
A319 Model-D3,
A320 Model-III,
Al20 Model-211,
A320 Model -232,
A320 Model -233,
A321 Model-III,
A321 Model-liZ,
A32! Model-13!,
A321 Model-2!1,
A321 Model-212,
Al21 Model-213,
Al21 Model -232,
A330-201, A330-202,
A330-203, A330-223,
Al30-243, A330-303,
A330-302, A330-321,
Al30-322, A330-323,
A330-341, Al30-342,
A330-343,
A340-211, -212, -213,
Al40-311, -312, -313,
Al40-54 I , A340-642,
A380-841, A380-842,
A380-86I
FEDERAL AVIATION ADMINISTRATION - PARTS MANUFACTURER APPROVAL PMANo.: PQ3886CE
Supplement No_: 28 Rev. I
Aerospace Sealants
4 Plum Court
(847) 428·5610
Part Name
Part
Number
Approved
Replacement For
Part Number
Approval Ba,i, and
Apprond Design Data
Sealant
NSLl422RC
A2
PRC-DeSoto Sealant
PR-1422 A2
14 CPR § 21.303
Product Anall']1is ReRQrt:
PARS030
Rev: A
ATR
ATR42-200. ATR42-300,
ATR42-320, ATR42-500,
ATR72-IOI, ATR72-201,
ATR72-102, ATR72-202,
ATR72-211, ATR72-212.
ATR72-lI2A
Same as above
Same as above
Same as above
Same as above
Lockheed
L-IOII-3S5-1,
L-IOII-3S5-1-14,
L-IOII-385-1-15,
L-IOII-385-3
Same as above
Same as above
Same as above
Same as above
McDonnell Douglas DC-S-II, DC-S-Il,
Make Eligibility
Model Eligibility
DC-S-21, DC-S-31,
DC-S-3l, DC-S-33,
DC-S-4I, DC-8-42,
DC-8-4J, DC-S-51.
DC-S-52. DC-S-53,
DC-SF-54. DC-SF-55.
DC-S-55, DC-8-61,
DC-8-61 F, DC-8-62,
DC-8-62F. DC-S-63.
DC-8-63F, DC-S-71,
DC-S-7IF, DC-8-n,
DC-8-72F, DC-8-73.
DC-8-73F
MD·II,MD-Ilf
Same as above
Same as above
Same as above
Same as above
70193 Dassault Aviation
Falcon 10,
Falcon 2000.
Falcon 2000EX,
MY5tere-Falcon 50,
MysICre-Falcon 900,
Falcon 900EX
Fan Jet Falcon,
Fan Jet Falcon Series C
Fan Jet Falcon Series D,
Fan Jet Falcon Series E.
Pan Jet Falcon Series F,
Fan Jet Faleon Series G.
Mystere~Palcon 200.
My,tere-Falcon 20.cs.
Mystere-Falcon 20-05,
Mystere-Falcon 20-E5.
Mystere-Falcon 20-FS
FEPERAL AVIATION ADMINISTRATION - PARTS MANUFACTURER APPROVAL PMA 1\0,: .!.P~Q;;;.:38:.:;:8:::;6C;;;.:E:..-_ _ __
Supplement 1\0.: ,;;2:;;,8;.:R::.ev:.:.,.;,I_ _ _ _ __
Aerospace Sealants
4 Plum Court
(847) 428-5610
Part Name
Sealant
Part
Number
Approved
Replacement For
Part Number
Approval Basis and
NSLl422RC
PRC-DeSoto Sealant
PR-1422 B'/,
14 CFR pUG)
PfQduct Analysis ReRQrt:
PAR8030
Rev; A
Date; 12-26-09 or later
FAA~approved reviSions
B~/l
Make Eligibility
CPM International,
SA
Model Eligibility
CFM56-2. CFM56-2A.
CFM56-2B, CFM56-3,
CFM56-3B, CFM56-3C.
CFM56-5, CFM56-5-AIIF,
CFM56-SA3, CFM56-5A4,
CFM56-SA4IF.
CFMS6-5AS,
CFMS6-SASI6.
CFM56-SBI,
CFMS6-5BI13.
CFMS6-5B2lP,
CFMS6-SB4I3.
CFMS6-SB3I2P,
CFM56-SB4/P I,
CFM56-SB5/P,
CFM56-5B7.
CFMS6-5B7/3.
CFM56-5C2,
CFM56-SC2!G.
CFMS6-5C3!F4,
CFM56-5C4,
CFM56-SBIIP,
CFM56-5B2/3,
CFM56-5B2I2P,
CFM56-5B413BI,
CFM56-5B3/2Pl,
CFM56-5B412P,
CFM56-5B6.
CFMS6-5B7rP.
CFM56-5B813.
CFM56-5C2I4,
CFM56-5C2IG4,
CFMS6-5C3IC,
CFM56-SC4IP.
CFMS6-SBII2P,
CFMS6-5B3!3,
CFM56-5B3/P,
CFM56-SBSI3.
CFMS6-5B4,
CFM56-5B412PI ,
CFM56-5B8/P,
CFM56-5B913,
CFM56-5C2IF,
CFM56-5C2IP,
CFM56-5C3IG4,
CFMS6-5C4/l.
CFM56-5B2.
CFM56-SB313BI
CFMS6-SB3IPI,
CFM56-5B613,
CFM56-5B4/P
71/93
FEDERAL AVIATION ADMINISTRATION
PARTS MANUFACTURER APPROVAL PMA No.: . :.P. ,Q.;;..3B;;..;8;;;.6C.::;;E=-_ _ __
Supplement No.: 28 Rev, I
":-':-'~~~--
Aerospace Sealants
4 Plum Court
(847) 428-5610
Part Name
Part
Number
Approved
Replacement For
Part Number
Approval Basis and
Sealant
NSLl422RC
BY.
PRe-DeSoto Sealant
PR-1422 B'h
14 CFR § 21.303
PAR8030
Rev: A
CFM International,
SA
CFM56-5B5,
CFMS6·5B6!2P,
CFM56·5B9IP,
CFMS6-5B9/2P,
CFMS6-5C2IF4,
CFM56-5C31F,
CFM56-5C31P,
CFMS6-SC4/IP,
CFMS6-7B20,
CFM56·7B22,
CFM56·7B22/3,
CFM56-7B24,
CFM56-7B24/3,
CFM56-7B26,
CFM56-7B2613B 1,
CFM56·7B27,
CFM56·7B2713,
CFM56-7B27/BI,
CFM56·7B2713B I,
CFM56·7B2713BIF,
CFM56· 7D20!3,
CFM56·7B2012,
CFM56· 7B2212,
CFM56-7B2213B1,
CFMS6-7B2412,
CFM56·7B2413B I,
CFM56-7B2612,
CFM56-7B2613B2F,
CFM56-7B27A,
CFMS6-7B2713F,
CFM56-7B271B3,
CFM56·7B27/3B3,
CFM56-7B221B I,
CFM56-7B241B1,
CFMS6-7B2613,
CFM56-7B261B 1.
CFM56·7B26J3F,
CFM56-7B26/B2,
CFM56·7B2613B2,
CFM56-7B27/2,
CFM56-7B27A13, CFM56-5C2, CFM56-5C2IG, CFM56-SC3IF4 Same as abQve
Same as above
Same as above
Same as above
Boeing
727 Series, 727-loo Series, 727C Series, 727-IOOC Series, 727-200 Series, 727-200F Series, 737-100 Series, 737-200 Series, 72/93 Make Eligibility
Model Eligibility
FEDERAL AVIATION ADMINISTRATION - PARTS MANUFACTURER APPROV AL PMANo.: PQ3886CE
Date: March 23,2011
Aerospace Sealants
4 Plum Court
(847) 428-5610
Part Name
Part
Number
Approved
Replacement For
Part Number
Approval Basis and
Sealant
NSLl422RC
PRC·DeSoto Sealant
PR·1422 B% Test and Computation per
14 CFR § 21.303
PAR8030
Rev; A
Date; 12·26·09 or later
BYz
Make Eligibility
Boeing
FAA¥approved revisions
Model Eligibility
737-20OC Series,
737·300 Series,
737-400 Series,
737·500 Series,
737·600 Series,
737·700 Series,
737-800 Series,
737·900 Series,
737·900ER Series,
747-100 Series,
747·200B Series,
747-200F Series,
747·2OOC Series,
747SR Sedes,
747SP Senes,
747-looB Series,
747~300
Series,
747·100B SUD Series,
747-400 Series,
747·400D Series,
747-4ooF Series.
757~200 Series,
757-200Pf Series,
757-100CB Series.
7S7-300 Series,
767-200 Series,
767·300 Series,
767-3OOF Series.
7('7-4ooER Series,
777~200 Series,
777·300 Series,
777~300ER Series,
777-200LR Series,
777F Series
Same as above
Same as above
Same us ubovc
Same as above
73/93
Bombardier inc.
BD-IOO·IAIO,
BD·7oo-IAI0,
BD-700·IAII, CL-2IS-6AIO, CL·215-6Bll (CL.215T Variant), CL-2IS-6BII (CL-4IS Variant), CL·6oo-I·AII (CL-600), CL-600·2A12 (CL·601-3A Varlant), CL·6oo-1BI6 (CL-600-3R Variant), CL-600-2B 16 (ClAM Variant) FEDERAL AVIATION ADMINISTRATION - PARTS MANUFACTURER APPROVAL PMANo.:
Supplement No.:
Date:
Aerospace Sealants
4 Plum Court
(847) 428-5610
PQ3S86CE
28 Rev. I
March 23, 2011
ParI Name
ParI
Number
Approved
Replacement For
Part Number
Approval Basis and
Make Eligibility
Sealant NSL I 422RC
PRC·DeSoto Sealant
PR*1422 Blii
14 CFR PU03
Bombardier Inc.
CL-600-2BI9 (Regional Jet Series 100 & 440). CL-600-2CI0 (Regional Jet Series 700, 70 I & 702). CL-6oo-2DIS (Regional Jet Series 705). CL-6oo-2D24 (Regional Jet Series 900), DHC-8-100 Series. DHC-8-2oo Series, DHC-8-300 Series. DHC-8-4oo Series Airbus
A300, Model B2-1 A,
A30a, Model B2-1 C.
A30a. Model 84·2C,
A300, Model B2K-3C,
A300, Model B4·103,
A30a, Model B2·203,
A31O, Model 204.
A31O, Model 221,
A31O, Model 222,
AlIO, Model 203,
AlIO, Model 322,
AlIO, Model 324,
AlIO, Model 304,
AlIO, Mod.I32S,
AlOO, Model B4·601,
AlOO. Model B4-M\
A3oo, Model 84·620,
AlOO, Model 84·605R.
'\300, Model D4·6ZZR,
A3oo, Model F4·605R,
A3oo, Model F4·622R,
A3oo, Model C4·605R
Variant F,
AlOO, Model B2~r.22,
A318Model-lli.
A318 Model·lll,
A318 Model·121.
A318 Model-122,
A319 Model-III.
,\319 Model-liZ,
,\319 Model ·113,
All9 Model-114.
,\319 Model·IIS.
A319 Model·l3l,
A319 Model·ll2,
,\319 Model·1J3
BIll
PrQduct Analysis Report:
PAR80l0
Rey, A
Same as above Same as above
Same as above
Same as above
74193 Model EligibllUy
FEDERAL AVIATION ADMINISTRATION - PARTS MANUFACTURER APPROVAL PMA No,; .o.P."Q.;;,.38"'8.;;,6C"'E"--_ _ __
Supplement No,: 28 Rev, I
Date: ":M7 a....rc'"':h-2:':3:"",-=2'::"O':""1I:---
Aerospace Sealants
4 Plum Court
(847) 428-5610
ParI Name
Pari
Number
Approved
Replacement ,For
Part Number
Approval Basis and
Sealant
NSLl422RC
B'I,
PRC-DeSoto Sealant
PR-1422 B';"
14 CFR PU03
product Anatysi.~ Report:
PAR8030
Rev, A
Datct 12-26-09 or later
Airbus
A320 Model-Ill,
A320 Model-211,
A320 Model -232,
A320 Model-233,
A321 Model-III
A321 Model-I 12,
A321 Model-131,
A3l1 Model-211,
A321 Model-212,
A)21 Model-lI3,
A321 Model -232,
A330-10 I, A330-202,
A330-203, A330-223, A330-243, A330-303, A330-302, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A340-211, -212, -213, A340-311,-312,-313, A340-S41, A34O-642, A380-841 ,A380-842, A380-861 Same as above
Same as ..hove
Same as above
Same as nbove
PraU & Whitney
JTI5D-I, JTl 50-lA, JTISD-IB, JTlSD-4, 1TI50-4B, JTISD-4C, JTI50-40, JTISD-5, JTISD-SA, !TISO-SB, JT1SO-SC, !TISO-5F, lT150-SR, JTIS0-SD, PT6A-6, PT6A-6A, PT6A-6B, PT6A-6IC20, PT6A-II, PT6A-11 AG, PT6A-15AG, PT6A-20, PT6A-20A, PT6A-20B, PT6A-25, PTM-25A, PT6A-25C, PT6A-27, PT6A-28, PT6A-29, PT6A-34, PT6A-34B, PT6A-34AG, PT6A-35, PT6A-36, PT6A-38, PT6A-40, PT6A-41, PT6A-4IAG, PT6A-42, PT6A-42A, PT6A-45, PT6A-45A, PT6A-4SB, PT6A-45R, PT6A-50 75/93 Make Eligibility
Model Eligibility
FEDERAL AVIATION AJ:)MINISTRATION - PARTS MANUFACTURER APPROVAL
PMA No.: -:-P~Q::,38;.;;86C=.E,--_ _ __
Date: 7M~a';";r"':ch";'2:':3:-,~2':'O:-11:-----
Aerospaee Sealants 4 Plum Court
(847) 428-5610
ParI Name
Part
Number
Approved
Replacement For
Part Number
Approval Basis and
Make Eligibility
Sealant NSLl422RC
BY1
PRe-DeSoto Sealant
PR-I4l2 BY,
14 CFR § 21.303
Pratt & Whitney
PAR8030
Rev: A
76/93
Model Eligibility
PT6A·60, PT6A·60A,
PT6A-60AG, PT6A·61.
PT6A-61 A, PT6A·65B,
PT6A-65R, PT6A-65AR,
PT6A·65AG, PT6A·IIO,
PTGA·II2, PT6A-II4.
PT6A·II4A, PT6A-II4A,
PT6A·116, PT6A·I21,
PT6A·I35, PT6A·I35A.
PT6A·52, PT6A·66,
PT6A·66A, PT6A-67,
PT6A-67A. PT6A·67AF
PT6A·67P, PT6A·67B.
PT6A-67D, PT6A·64,
PT6A·66B, PT6A·68,
PT6A·67AG, PT6A.67T,
PT6A-66D, PT6A·67F,
PT6B·36, PT6B·36A,
PT6B·36B. PT6B-37,
PT6B·37A,
PT6C-67D, PT6C·67C,
PT6T·3. PTfiT·3A,
PT6T·3B, PT6T·3BG,
PT6T-3BE, PT6T·G,
PT6T·3D, PT6T·9,
PT6T·3DE, PT6T·3DF.
PT6T·3BF,
PWII8,PWII8A,
PWII8B, PWII9B,
PWII9C, PW120.
PWI20A, PW121,
PWI2IA, PWI23,
PWI23AF, PWI23£3,
PWIl3C, PWI2JD,
PWI23E,PWI24B,
PWI25B, PWI26A,
PWI27, PWIl7E,
PWI27F, PWI27G,
PWI27M, PWISOA,
PW206A, PW206B,
PW206B2, PW206C,
PW206E. PW207C,
PW207D. PW207DI,
PW207D2,
PW305, PW305A,
PW305B, PW306A,
PW306B, PW306C,
PW307A, PW308A,
PW308C, PW530A,
PW535A, PW535B
FEDERAL AVIAnON ADM!NIS1RATION - PARTS MA]','UFACTURER APPROVAL
PMA No.: .:.P.;;:sQ.:;;38;::8:::.6C.:;;E~_ _ __
Supplement No.: ,;;2.;,8.;,R:;:e.;,v...,;I.,...,.-...,--_ __
Date: March 23, 201 t
Aerospace Sealants
4 Plum Court
(847) 428-5610
Part Name
Part
Number
Sealant
Same as above
Same as above
Approved
Replacement For
Part Number
Approval Basis and
Make Eligibility
PRC·DeSoto Sealant
PR·1422 By.,
14CFR§2U03
PAR8030
Rev; A
pate; 12·26·09 or later
FAA·approved revisions
Pratt & Whitney
Same as above
Same as above
McDonnell Douglas MD,II, MD·IIF
77/93
Model Eligibility
PW545A, PW545B,
PW545C, PW610F·A,
PW617F·E, PW615F·A.
PW2037, PW2037M,
PW2040, PW2043,
PW2240. PW2143.
PW2643, PW2040D.
PW2337, PW2037D.
FI17·PW-loo.
JFTDI2A·4A.
IFTDI2A·5A, JTSD-208,
JT8D·217, JT8D-217A.
JT8D-217C. JTSD-219,
mD-lA, JT9D·7.
JT9D· 7H, JT9D·7A,
mD·7AH, mD-7F.
JT9D·20, JT9D·7J,
JT9D·20J. IT9D·59A.
JT9D·7Q3. JT9D·7R4E,
IT9D· 7R4H I, JT9D· 70A,
JT9D· 7R4D, JT9D-7R4E I,
mD·7R4E4, JT9D-7Q,
JT9D·7R4DI,
IT9D· 7R4G2,
PW4050. PW4052.
PW4056, PW4060,
PW4060A, PW4060C,
PW4062.PW4062A,
PW4152, PW4156,
PW4156A. PW4158,
PW41(,O, PW4461l.
PW4462, PW4650,
PW4074, PW4077,
PW4077D. PW40B4,
PW4084D. PW4090.
PW4090·3, PW41l74D,
PW4090D, PW4098,
PW4164, PW4168,
PW416BA, PW4164C,
PW4164CIB, PW4 I 70,
PW4168A·ID.
PW4168·ID, PW4164-lD,
PW4164C,ID,
PW4164CIB·ID,
PW6I 22A, PW6124A
FEDERAL AVIATION ADMINISTRATION - PARTS MANUFACTURER APPROVAL PMA No.: .;;.P.;:sQ;;.;38;;;;8:;;:.6C::;:E~_ _ __
Supplement No.: ,;;:2,;;.8,;;R:.:,ev:,,:,',;,1,..,,~,.-_ __
Aerospace Sealants
4 Plum Court
(847) 428-5610
Part Name
Part
Number
Approved
Replacement For
Part Number
Approval Basis and
Sealant
r-;SLl422RC
PRC·DeSoto Sealant
PR·1422 BY,
14 CPR § 21.303
BYl
Make Eligibility
Model Eligibility
Loekheed
L·IOII·385·I,
L·1011·385·1·14.
L·IOII-385·1·15,
L-IOII·385·3
CFM International,
SA
CFM56·2, CFM56·2A,
CFM56-2B, CFM56·3.
CFM56·3B, CFM56·3C,
CFM56·5, CFM56-S·A I if,
CFM56·'A3, CFM56-5A4,
CFM56·,A4iF,
CFM56-5A5,
CFM56·5A516,
CFM56-5Bl,
CFM56-5BI13,
CFM56·5B2!P,
CFM56·5B413,
CFM56-5B312P,
CFM56·5B4/P I,
CFM56·5B51P,
CFMS6·5B7,
CFM56·5B7!3,
CFM56-5C2,
PAR8030
Rev: A
F AA ~approvcd revisions
Sealant
NSLI422RC
B2
PRC·DeSoto Sealant
PR·1422 B2
14 CFR § 21.303
PAR8030
Date: 12~26-09 Of later
CFMS6-5C2/G,
CFMS6·5C3iF4,
CFM56-5C4.
CFM56·5[J liP,
CFM,6·5B2/3,
CFM56·,1l2l2P,
CFMS6·5B4I3BI,
CFM56·5B312PI,
CFM56·5B412P.
CFM56-5B6,
CFM56·5B7/P,
CFM56-5B813,
CFM56-5C2/4,
CFM56·5C2IG4,
CFM56·5C3!G,
CFM56-5C4/P,
CFM56-5Bli2P,
CFM56-SB313,
CFM56· 5831P,
CFM56-5B513,
CFM56·5B4
78/93
FEDERAL AVIAnON ADMINISTRATION - PARTS MANUFACTURER APPROV AL
PMA No.: .:..P,::.Q3;;;;:8;.::.86C=E:.-_ _ __
Supplement No.: .,:2.:;..8.:..:R.:;..ev;';",;,1,..-".,..,-,.-_ __
Aerospace Sealants
4 Plum Court
(847) 428-5610
Fart Name
Part
Number
Approved
Replacement For
Part Number
Appro.al Basis and
Sealant
NSLl422RC
B2
PRC-DeSoto Sealaot
PR-1422 B2
14 CFR § 2L303
Produc~.AJ1aly~!LR~
PAR8030
Rev: A
F AA~approyed revisions
79193 "'take Eligibility
CFM International,
SA
Moder Eligibility
CFM56-5B412PI,
CFM56-SB8IP,
CFMS6-5B9/3,
CFMS6-5C2IF,
CFMS6-5C2!P,
CFM56-SC3/G4,
CFM56-SC411,
CFM56-5B2,
CFM56-5B313B I,
CFM56-5B3!PI,
CFM56-5B613,
CFM56-5B4/P,
CFM56·5B5,
CFM56·5B6!2P,
CFM56·5B9IP,
CFM56·5B912P.
CFMS6·5C2IF4,
CFM56·SC3/F,
CFM56-SC3/P.
CFM56·5C4liP,
CFM56·7B20,
CFM56-7B22,
CFM56·7D2213,
CFM56·7B24,
CFM56-7B24/.1,
CFM56-7B26.
CFM56·1926/38 I,
CFM56·7B27,
CFM56-7B27/3.
CFM56-7B27/BI,
CFM56-7B27!3BI,
CFM56·7B27/3B IF,
CFM56-7B20/3,
CFM56-7B2012,
CFM56· 7D22/2,
CFM56· 7B22/3B I,
CFM56· 7B24/2,
CFM56-7B2413BI.
CFM 56· 1926/2,
CFM56-7B26/3B2F
CFM56· 7B27A,
CFM56-7B2713F,
CFM56-7B27/B3,
CFM56·7B27/3B3,
CFMS6· 7B22/B I,
CFMS6·7B24/BI,
CFM56·7B2613,
CFMS6-7B26/Bl,
CFM56·7B2613F
FEDERAL AVlA TION ADMINISTRATION - PARTS MANljFACTURER APPROVAL
Aerospace Sealants
4 Plum Court
(847) 428-5610
PMANo.:
Supplement No.:
Date:
ParI Name
Part
Number
Approved
Replacement For
Part Number
Approval Basis and
Sealant NSLl422RC
B2
PRC-DeSoto Sealant
PR-l422 B2
14 CFR § 21.303
PAR8030
Rev: A
Make Eligibility
Same as above
Same as above
80/93
Model Eligibility
CFM56·7B261B2.
CFM56·7B2613B2.
CFM56-7B2712,
CFM56·7B27 Al3,
CFM56·5C2,
CFM56·5C2IG.
CFM56·5C31F4
Boeing
727 Series, 721·100 Series,
727C Series,
727-100C Series,
727-200 Series,
727-200F Series,
137-1 00 Series,
737·200 Series,
737-2OOC Series,
737·300 Series,
737·400 Series,
737-500 Senes,
737-600 Series.
737·100 Senes.
737·800 Series.
73 7~900 Series,
737·900ER Senes,
747.. 1oo Series.
747·200B Series,
747-200F Series,
747-200C Series,
747SR Series,
747SP Series,
747-IOOB Series,
747-300 Scri<s,
747-100B SUD Series,
747-400 Series,
747-4ooD Series,
747..jOOF Series,
757-200 Serio"
757.2ooPF Series,
757.20OGB Series.
757-300 Sories,
767·200 Series,
767·300 Series.
76?-300F Series,
767-4ooER Series.
777-200 Series,
777·300 Series,
777·)OOER Series.
777-200LR Series,
777F Series
Same as above
March 23. 20 II
CFM In'emational,
SA
pate: 12-26-09 or later
Same as above PQ3886CE
28 Rev. 1
FEDERAL AVIATION ADMINISTRATION - PARTS MANUFACTURER APPROVAL PMA No.: .:.P..:::>Q.;;;38~8:.:;;6C~.E:;:...._ _ __
Supplement No.: ;.2;;.8;:;R:;,ev;,;.,:.1,--,.,-_ __
Date: March 23,2011
Aerospace Sealants 4 Plum Court
(847) 428-5610
Part Name
Part
Number
Approved
Replacement For
Part Number
Approval Basis aud
Make Eligibility
Sealant
NSLl422RC
B2
PRC-DeSoto Sealant
PR-1422 B2 Test and Computation per
Bombardier tnc.
14 CFR § 21.303
PAR8030
Rev: A
R~te;
Model Eligibility
BD-I 00·1 A 10,
BD-700·IAIO,
BD-700·IAII.
CL-2IS·6AIO,
CIAI5-6BII (CL.215T
Variant),
12·26·09 or later
ClrZ15-6Bll (CL-415
Variant).
CL·600-I-A II (CL·GOO). CL·600-2A 12 (CL-60 1·3A Variant») CL-600·2BI6 (CL·600·3R Variant). CL·600·2BI6 (CL-604 Variant), CL·600·2B 19 (Regional Jet Series 100& 440), CL·600·2CI0 (Regional Jet Series 700,701 & 702), CL·600-2D 15 (Regional Jet Senes 705), CL-600·ZD24 (Regional Jet Series 900), DHC·8-100 Series, DHC-8·200 Series, DHC·8-300 Series, DHC-8-400 Series Same as above
Same as above
Same as above
Same as above
8li93
Praff & Whitney
JTI5D-I, JTI5D·IA, lTI5D·IB. JTl5D·4. JTI5D·4B, JTl5D·4C. JTI5D-4D, lT15D-5, lTI5D-5A, lTl5D-5B. JTI5D·5C,lTI5D·5F, lTI5D·5R, lTI5D·5D, PT6A·6. PT6A·6A, PT6A·6B, PT6A-6/C20, PT6A·II, PT6A-IIAG, PT6A-15AG, PT6A·20. PT6A·20A. PT6A·20B, PT6A·25, PT6A·25A, PT6A·25C, PT6A·27, P PT6A·34, PT6A·34B, PT6A·34AG, PT6A·35, PT6A-36. PT6A·38, PT6A·40, PT6A·41, PT6A-41 AG, PT6A-42. PT6A-42A. PT6A-45, PT6A-45A, PT6A-45B, T6A-28, PT6A-29 FEDERAL AVIATION ADMINISTRATION - PARTS MANUFACTURER APPROVAL
PMA No.: .:.P.::l,Q3;:.:8:::;86;;,;C;;,;;E:..-_ _ __
Date: ":'M7 ar-c-:h-2:::3:"',"::2'::'0:"'11:----
Aerospace Sealants
4 Plum Court
(847) 428-5610
Part Name
Sealanl
Part
Number
"'--NSLI422RC
B2
Approved
Replacement For
Part Number
Approval Basis and
Make Eligibility
PRe-DeSoto Sealant
PR·1422 B2
14 CFR § 21.30)
Pratt & Whitney
PAR8030
Rev; A
Date; 12·26·09 or laler
82/93
Model Eligibility
PT6A·45R, PT6A·50,
PT6A·60, PT6A·60A,
PT6A·60AG, PTM·61,
PT6A·6IA, PT6A·65B,
PTM·65R, PT6A·65AR,
PT6A-65AG, PTM·II 0,
PT6A·112, PTM-114,
PTM·114A, PT6A·114A,
PT6A-116, PT6A·121,
PT6A·135, PT6A·135A,
PT6A·52, PT6A-66,
PTM·66A, PT6A-67,
PT6A-67A, PT6A·67 AF,
PT6A·67P, PTM-67B,
PTM·67D, PT6A·64,
PT6A-66B, PT6A·68,
PT6A·67AG, PT6A-67T,
PT6A·66D, PT6A·67F,
PT6B·36, PT6B·36A,
PT6B·36B, PT6B·)7,
PT6B·37A,
PT6C·67D, PT6C·67C,
PT6T-3, PT6T-3A,
PT6T-3B, PToT-3BG,
PToT-3BE, PT6T·6,
PT6T·3D, PT6T-9,
PT6T-3DE, PT6T-3DF,
PT6T-3BF,
PWI18,PWI18A,
PWI18B, PWI19B,
PWI19C, PW120,
PWI20A, PW121,
PWI2IA, PW123,
PWI23AF, PWI23B,
PWI23C, PWI23D,
PWJ23E, PWI24B,
PWI25B, PWI26A,
PW127, PWI27E,
PWI27F,PWI27G,
PWI27M, PWI50A,
PW206A, PW206B,
PW206B2, PW206C,
PW206E, PW207C,
PW207D, PW207D I,
PW207D2,
PW305, PW305A,
PW305B, PW306A,
PW)06B, PW306C,
PW307A, PW308A,
PW308C, PW530A
PMA No.: ":'P..,.Q3::'8;;;,86C;..;;.;;.Ec.-_ _ __
Date: 7M7a-rc~h-2::-:3:-,-=2:::-01:-:1:-----
Aerospace Sealants
4 Plum Court
Sleepy Hollow, IL 601 18
(847) 428-5610
Part Name
Part
Number
Approved
Replacement For
Part Number
Approval Basis and
Make Eligibility
Sealant
NSLl422RC
B2
PRC-DeSoto Sealant
PR-1422 B2 Test and Computation per
14 CFR §2 1.303
eroduct Analysis Report:
PAR8030
Rev: A
Qate: 12-26-09 or later
Pratt & Whitney
PW535A. PWS35B.
PW545A. PW545B.
PW54SC. PW610F-A.
PW617F-E. PW615F-A.
PW2037. PW2037M.
PW2040, PW2043,
PW2240. PW2143,
PW2643. PW2040D.
PW2337. PW2037D,
F117-PW-100,
JFTD 12A-4A.
JFTD 12A-5A, JT8D-208.
JT8D-217. JT8D-217A.
ITBD-217C_ JT8D-219,
J1'9D-3A. J1'9D-7,
J1'9D-7H, J1'9D· 7 A,
JT9D·7AH,l1'9D-7F,
J1'91)-20, J1'9D-7 J,
JF9D-20J. J1'9D·59A,
J1'9D-7Q3, J1'9D-7R4E.
J1'9D· 7R4H I, JT9D-70A.
JT9D-7R4D, J1'9D-7R4EI,
JT9D-7R4E4, JT9D-7Q.
J1'9D-7R4DI.
JT9D-7R402,
PW40S0. PW4052,
PW405G. PW4060.
PW4060A, PW4060C,
PW4062. PW4062A,
PW4152, PW4156,
PW4156A, PW4IS8,
PW4160, PW4460,
PW4462, PW4650,
PW4074, PW4077,
PW4077D. PW4084.
PW4084D, PW4t~)O,
PW4090-3, PW4074D.
PW4090D, PW40n.
PW4164, PW4168,
PW4168A, PW4164C,
PW4164C1B. PW4170,
PW4168A-ID,
PW4168-lD, PW4164-1 D,
PW4164C-ID,
PW4164CiB-1 D,
PW6122A, PW6124A
Same as above
Same as above
Same as above
Same as above
Airbus
A300,
A300,
A300,
A300,
Model
Model
Model
Model
B2-IA,
B2-1C,
B4-2C,
B2K-3C,
PARTS MANUFACTURER APPROVAL PMA No.: ~P~Q:::.38~8~6C~E:::.·_ _ _ __
Supplement No.: .:2:;.8.:;R:;;,ev;,,;..:.1_ _ _ _ __
Aerospace Sealants
4 Plum Court
(847) 428-5610
Part Name
Part
Number
Sealant
NSLl422RC
B2
Approved
Replacement For
Part Number
Approval Basis and
PRC~DeSoto
14 CfR § 21.303
Product Analysis Reoort:
PAR8030
Rev: A
PR-1422 B2
Sealant
84i93
Make Eligibility
Airbus
Model Eligibility
A300, Model B4-103,
A300. Model B2-203.
A310. Model 204,
A31O, Model 221,
A310, Model 222,
A310, Model 203.
A310, Model 322,
A31O, Mode1324,
A31O. Model 304.
A310, Model 325.
A300, Model B4-601,
A300. Model B4-603.
A300. Model 84-620.
A300, Model B4-605R.
A300, Model B4-622R,
A300, Model F4-60SR,
AJOO. Model f4-622R.
A300, Model C4-605R
Variant F.
A300. Model B2-622.
A318 Model-III,
A318 Model-liZ.
A318 Model-121,
A318 Model-122.
A319 Model-III,
A319 Model-I 12.
A319 Model-I 13.
A319 Model-I 14,
A319 Model -liS,
A319 Model-D!,
A319 Model-D2.
A319 Model-D},
A320 Model-III,
AnO Model -211 ,
A320 Model -232.
A320 Model -233,
AHI Model-III,
A321 Model-I 12.
A321 Model-131,
A321 Model-211,
A3l1 Model-ZIZ,
A321 Mode!-213,
A32! Model -232.
A330-201. A330-202,
A330-203. A330-223,
A330-243, A33G-303.
A330-J02. A330-32!,
A33G-322, A330-323,
A330-34I. A330-342.
A330-343,
A34G-ZII. -212. -213,
A340-311. -312, -313,
A340-541, A340-642,
A380·841. A380-842
FEDERAL AVIA TION ADMINISTRATION -:.PARTS
MANlJFACT~R
PMA No.: .:.P.;:.Q;:.:38:.:;86:::.;C;;:;E:...-_ _ __
Supplement No.: .;:2;;.8.:.:R;;.ev;.;...:-I,...,,~---
Aerospace Sealants
4 Plum Court
Sleepy Hollow, IL 60 I 18
(847) 428-5610
Part Name Part
Number
Sealant
NSL1422RC
B2
APPROVAL
Approved
Replacement For
Part Number
Approval Basis and
PRC~DeSotO
14 CFR § 21.303
Sealant
PR-1422 B2
Make Eligibility
Model Eligibility
AirbUS
A38Dv861
Product Analysis RenQ.r:t
PAR8030
Rev: A
!2ils:; 12-26-09 or later
FAA~approved
revisions
Same as above
Same as above
Same as above
Same a above
ATR
ATR42-200, ATR42-30D.
ATR42-320, ATR41-500,
ATR72-IOI, ATR72-201.
A TR 72-102, ATR 72-202.
ATR72-21I, ATR72-212,
ATR72-112A
Same as above
Same as above
Same as above
Same as above
Lockheed
L-1011-385-1,
L-IOII-385-1-14,
L-1011-385-1-15,
L-IOII-385-l
Same as above
Same as above
Same as above
Same as above
McDonnell Douglas DC-8-II, DC-g-12,
DC-8-2I, DC-B-3I,
DC-S-n, DC-B-ll,
DC-S-41. DC-8-42.
DC-S-43. DC-8-5I,
DC-8-52, DC-8-53.
DC-8F-54, DC-BF-55,
DC-B-55, DC-S-(, I,
DC-8-6IF. DC-8-62,
DC-8-62F. DC-8-63,
DC-8-63F. DC-8-7I,
DC-8-7IF, DC-B-72.
DC-B· 72F, DC-S-73,
DC·S-73F
DC9-11, DC-9-12,
DC-9·13, DC·9·14.
DC-9·15, DC·9.ISF,
DC-9-2I, DC-9-J 1,
OC-9-32, OC-9·J I (VC-9Cj,
DC-9-32F,
DC-9·32 (C-9A, C-9B),
DC·9·34, DC-9-34F,
DC·9-4I, DC-9-SI,
DC-9-SI (MD·SI).
DC-9·B2 (MD·52),
DC·9-S) (MO.Bl).
DC-9-87 (MD-87),
MD-88. MD-90-30,
717-200
MD·II,MD-lIF
85193 FEDERAL AVIATION ADMINISTRATION - PARTS MANUFACTURER APPROVAL PMANo.: PQ3886CE
Aerospace Sealants
4 Plum Court
(847) 428-5610
Part Name
Part
Number
Approved
Replacement For
Part Number
Approval Basis and
Make Eligibility
Model Eligibility
Sealant
"ISLl422RC
B2
PRe-DeSoto Sealant
PR·1422 B2
14 CFR § 2U03
PARS030
Rev: A
Dassault Aviation
falcon IOl
Falcon 2000.
Falcon 2oo0E)(,
Mystere·Faleon 50,
Mystere-Falcon 900,
Falcon 900EX
Fan Jet Falcon,
Da~£ 12~26~09
or later
Fan Jet Falcon Series C,
Fan Jet Falcon Series D,
Fan Jet Falcon Series E,
Fan Jet Falcon Series F,
Fan let Falcon Series G,
Mystere--Falcon 200,
Mystere-Falcon 20-C5,
Mystere·Faleon 20·05,
Mystere-Falcon 20·E5,
Mys[cre-Falcon 20·fS.
Sealant
NSLl776M
Blfz
PRC·DeSoto Sealant
PR·1776M ay,
14CFR §2IJ03
Product Anal ysis Report:
PARS030
Rev; A
86193 DOeing
727 Series, i2 7- J00 Series,
727C Series.
727, !HOC Series,
727·200 Series,
727,200F Series,
737-100 Series,
737-200 Senes,
737-200c Series,
737,3<HJ Senes,
737,400 Sed es,
737,5()() Series,
737-600 Series,
737-700 Series,
737-800 Series,
737·900 Series,
737·9OOER Sene&,
747.. 100 Series,
747·200B Series,
747-200F Series,
747-20OC Series,
747SR Series,
747SP Series,
747·100B Series,
747,300 Series.
747·looB SUD Series,
747,400 Series,
747-4ooD Series,
747-400F Series
757·200 Series,
757·200PF Series,
757·200cB Series,
757,300 Series
NSL1422RC
Rev. B 07-15-12
NSL1422RC Class A
Product Description:
NSL1422RC Class A is a fuel resistant sealant
for use on integral fuel tanks and pressurized
cabins as well as other areas subject to contact
with aircraft fuels, lubricants, oils, water and/or
weathering.
NSL1422RC Class A is a two-part polysulfide
base compound which cures at room temperature to a flexible, resilient rubber.
When mixed, NSL1422RC Class A is a self leveling liquid. For mixed application life details see
cure profile below.
Product Features:
• Excellent adhesion to aluminum, magnesium, titanium, steel and numerous other aircraft substrates.
• Designed to withstand the attack of sulfur compounds that are present in jet fuels and aviation gas.
• Service temperature range -65ºF(-54ºC) to
250ºF(121ºC) with excursions to 275ºF
(135 ºC).
• Suitable for application by brush to thickness of up to 25 mils.
Heat-Accelerated Curing:
Increased temperature and relative humidity
will reduce work life and speed up the cure.
Reduced temperature and relative humidity will
extend work life and slow the cure.
Available in 2½- and 6-oz. cartridges, pint, quart
and gallon kits. Also available in premixed and
frozen cartridges. Other-size packaging available
upon request.
Shelf Life:
Sealed containers: 9 months when stored below
80°F. Slight changes in work life, viscosity and curing
rate may occur but will not affect end performance of
the product.
Typical Properties:
UNCURED
Color: Base Curing Agent Mixed Mixing Ratio: (by weight) (by volume) Non-volatile Content Viscosity, poise
Base
Curing Compound Specific Gravity Consistency CURED – ROOM TEMPERATURE
Cured – 7 days @ R.T. ²
Tensile Strength, PSI Elongation, % Durometer, Shore A Min. Peel Strength, PPI
Flash Point
Fungus Resistance Replacement For:
PR-1422 Class A
Conforms To:
3
AMS-S-8802 & BMS5-26U by FAA-PMA Approval
Cure Profile:
Packaging:
A-1/2
Off-white
Black
Gray
100:12
100:8.3
86%
2501
1,000¹
1.52
Self Leveling
250
250
50
30
90ºF
Non-nutrient
¹ Brookfield RVF Spindle #6
² Brookfield 77ºF and 50% R.H.
3
Material and data depicted on this TDS is provided to Aerospace Sealants
by the approved manufacture supplier(s) for this material. Qualification and
inclusion on the QPL(s) is by the supplier(s) per their material identification
and conforms as required by the governing specification.
A-2
Application Life (hrs) ² 1/22
Tack Free Time (hrs) ²
<5<9
Cure Time to 35 Shore A (hrs)
<5
<12
Aerospace Sealants FAA PMA
4 Plum Ct. - Sleepy Hollow, Illinois 60118
(800) 527.0011
This document contains proprietary information and is not to be transmitted, reproduced or disclosed to anyone without written permission of Aerospace Sealants.
NSL1422RC
Rev. B 07-15-12
NSL1422RC Class B
Product Description:
NSL1422RC Class B is a fuel resistant sealant
for use on integral fuel tanks and pressurized
cabins as well as other areas subject to contact
with aircraft fuels, lubricants, oils, water and/or
weathering.
NSL1422RC Class B is a two-part polysulfide
base compound which cures at room temperature to a flexible, resilient rubber.
When mixed, NSL1422RC Class B is a thixotropic
paste that will not flow. For mixed application life
details see cure profile below.
Product Features:
• Excellent adhesion to aluminum, magnesium, titanium, steel and numerous other aircraft substrates.
• Designed to withstand the attack of sulfur compounds that are present in jet fuels and aviation gas.
• Service temperature range -65ºF (-54ºC)
to 250ºF (121ºC) with excursions to 275ºF (135 ºC).
• Suitable for application by extrusion gun
or spatula.
Heat-Accelerated Curing:
Increased temperature and relative humidity
will reduce work life and speed up the cure.
Reduced temperature and relative humidity will
extend work life and slow the cure.
Available in 2½- and 6-oz. cartridges, pint, quart
and gallon kits. Also available in premixed and
frozen cartridges. Other-size packaging available
upon request.
Shelf Life:
Sealed containers: 9 months when stored below
80°F. Slight changes in work life, viscosity and curing
rate may occur but will not affect end performance of
the product.
Typical Properties:
UNCURED
Color: Base Curing Agent Mixed Mixing Ratio: (by weight) (by volume) Non-volatile Content Viscosity, poise
Base
Curing Compound Specific Gravity Consistency CURED – ROOM TEMPERATURE
Cured – 7 days @ R.T.³
Tensile Strength, PSI Elongation, % Durometer, Shore A Min. Peel Strength, PPI
Fungus Resistance Replacement For:
PR-1422 Class B
Conforms To:
4
AMS-S-8802 & BMS5-26U by FAA-PMA Approval
Cure Profile:
Packaging:
B-1/2
B-2
Application Life (hrs) ³ 1/22
Tack Free Time (hrs) ³
<5<9
Cure Time to 35 Shore A (hrs)
<5
<12
Black
White
Dark Gray
100:12
100:9.7
97%
11,000²
1,000¹
1.45
Paste
200
300
52
25
Non-nutrient
¹ Brookfield RVF Spindle #6
² Brookfield RVT Spindle #7
³ Conditions 77ºF and 50% R.H.
4
Material and data depicted on this TDS is provided to Aerospace Sealants
by the approved manufacture supplier(s) for this material. Qualification and
inclusion on the QPL(s) is by the supplier(s) per their material identification
and conforms as required by the governing specification.
Aerospace Sealants FAA PMA
4 Plum Ct. - Sleepy Hollow, Illinois 60118
(800) 527.0011
This document contains proprietary information and is not to be transmitted, reproduced or disclosed to anyone without written permission of Aerospace Sealants.
Material Safety Data Sheet
HMIS HAZARD RATING
Polysulfide Class A, Part A only
2
3
0
H
FED-STD-313
Latest Revision
May be used to comply with
OSHA's Hazard Communication Standard
29 CFR 1910. 1200 Standard must be
consulted for specific requirements
OMB registration Number
None
Health
Flammability
Reactivity
PPE
Type of Data Sheet
New
SECTION I General Information
X
Revised
Commercial ID (as on label and list)
Number of revised section:
Government contract or order number
NSL1422RC Class A (Part A)
Manufactures Name Royal Adhesives & Sealants
National Stock Number /CAN LSN /SIN
N/A
Manufactured For:
National Sealants & Lubricants
33110 Old Hempstead Road
Magnolia, TX 77355
Emergency Telephone Number
N/A
Part number, product and or trade name
Hazardous items
Yes
Information telephone number
(800) 424-9300 CHEM TREC
X
Date prepared
(800) 527-0011
Mfgr. CAGE code
05/14/2007
Name of Preparer
14439
Signature of preparer
On File
Billy Matthews
NRC License number
EPA Registration Number
N/A
Specification Number
N/A
Spec. Type
No
AMS S-8802
Spec. Grade.
Spec. Class
II
B
A1/2 - A2 - A4
SECTION II - Hazardous Ingredients SARA III Information*
Hazardous Components (Specific chemical identity:
Common Name (s)
Other limits
By % weight
OSHA PEL
ACGHI TLV
NIOSH #
CAS #
55%
N/E
N/E
**
68611-50-7
10%
50 ppm
50 ppm
XS5250000
00108-88-3
** Liquid polysulfide polymer
(none CFR 1910.1200)
Toluene (Methyl Benzene)
** Toxic Data Not Established
All remaining Constituents are non-hazardous per FED-STD-313 All Constituents are listed in TSCA inventory; complete mixture is excluded Per TSCA Par. 710.4 (d)
95 (6) (7) Constituents are not listed in TSCA 12b CORR. LIST
* Indicates toxic chemical (s) subject to the reporting requirements of section 313 of Title III and of 40 CFR 372
SECTION III Physical /Chemical Characteristics
Boiling Point
Specific Gravity (H2 O = 1)
2310 F
Auto ignition Temperature
1.5
PH
Vapor Pressure (mm hg)
2
% Volatile by Volume
8.5
Evaporation rate (Butyl Acetate = 1)
2.0
Melting Point
Liquid at room temperature
Vapor Density Air = 1
3.1
Solubility in Water
Negligible
Decomposition Temperature
N/A
N/A
Magnetism (milligauss)
15
N/A
Viscosity
Corrosion Rate:
300 Poises
N/A
Temp
Material Reference
Blank
Appearance and Odor:
Volatile Organic Compound VOC
White Paste / Polysulfide odor
140 grams / liter
SECTION - IV Fire and Explosion Hazard Data
Flash Point (method used)
320 C ----- 900 F TCC
Extinguishing Methods:
Dry chemical, CO2 , Foam, Water
Flammable Limits
LEL
N/A
UEL
1.3
Special Fire Fighting Procedures
In confined areas wear self contained breathing apparatus, cool exposed containers with fog nozzles
Unusual Fire and Explosion Hazards
Vapors are heavier than air and will collect at low points see (Section V)
SECTION V - Reactivity Data
Stable
Unstable
Conditions to avoid
X
Neutralizing Agents
Open Flame High Heat
Incompatibility (materials to avoid)
Strong oxidizing agents
Hazardous Polymerization
May Occur
Will not Occur
N/A
Hazardous Decomposition products
H2S, CO, CO2, SO2, Smoke
X
Conditions to avoid
N/A
7.1
FED-STD-313 Latest Rev
Material:
Page 2
Date
05/14/2007
Polysulfide Class A part A only
SECTION VI - Health Hazard Data
Route (s) of entry
Inhalation?
Skin?
Ingestion?
yes
yes
yes
Health Hazards (Acute and Chronic) Non established (possible skin irritation) not considered a primary skin irritant may lead to muscular
weakness and dizziness, long-term exposure may lead to dermatitis, liver and kidney damage.
INHALATION: vapor will irritate nose throat and respiratory tract, high concentration may cause dizziness
INJESTION: can cause irritation of the gastrointestinal tract
Carcinogsnicity:
NTP?
IARC Monographs?
NO
NO
OSHA Regulated?
NO
Medical conditions generally aggravated by exposure:
Pre existing skin disorders, respiratory tract, liver and kidney damage
Signs and symptoms of exposure:
Skin or eye irritation head ache and nausea with impaired coordination
Emergency and first aid Procedures: Eyes: Flush with large amounts of water consult physician. Skin: wash with soap and water.
Ingestion: If swallowed get immediate medical attention.
SECTION VII - - Precautions for Safe Handling and Use
Steps to be taken in the event the material is released or spilled:
Remove sources of ignition. Scoop up and transfer to container for reaction with curing agent. Clean up remainder with sand or
sweeping compound. Wash area with soap and water. Wear appropriate clothing and protective equipment. (section VIII)
Waste disposal method:
React with curing agent and dispose of as solid hazardous waste per Federal, State and local regulations
Precautions to be taken handling or storing:
Empty drums may contain explosive vapors Store below 120 degrees dry area away from acids, oxidizers, open flame or other possible
ignition sources Ground containers when transfering.
Other precautions:
Wash hands thoroughly after handling this product prior to eating , drinking or smoking
SECTION VIII - Control Measures
Respiratory protection (specify type)
When applying in any circumstances likely to produce airborne levels of solvent vapors in excess of the TLV or when mechanically
abrading the cured material use an organic vapor cartridge or air supplied respirator.
Ventilation:
Local exhaust
Special:
Air
Protective gloves Type:
Solvent resistant gloves
Mechanical (general)
N/A
Other
Fan
Eye protection Type:
N/A
Safety Glasses / face shield
Other protective clothing or Equipment
Appropriate clothing to avoid prolonged skin contact
Work /Hygienic practices:
Safety shower, eye wash station and washing facilities should be available
SECTION IX - Transportation
Applicable regulations:
49CFR X
IMO X
IATA
Shipping name:
Not regulated
Unit container
Hazard class:
X
Military Air (AFR 71-4)
ID Number
N/A
DOT Spec. container
N/A
IMDG
Marine Pollutant No
Reportable Quantity
UN number
UN 1133
N/A
Net explosive weight:
N/A
Labels:
3
DOT Exempt /DOD CCN
Flammable Liquid
Limited Quantity:
N/A
Aerosol propellant (s)
Varies with quantity
U.S. Postal regulations:
N/A
124.122 Harmful matter
Disposal Information:
Incineration or land fill as is, or react with Part B dispose as hazardous solid waste
EPA hazardous waste number /Code:
Hazardous waste characteristics:
D-001 ignitable
Sludge
Disposal methods:
Incineration or land fill, The material must be handled, packaged and transported according to Federal, State or local regulations
The information in this MSDS has been obtained from sources that we believe to be reliable. However since much of this information has been received
from sources outside of the company, it is provided without any warranty expressed or implied regarding its correctness or suitability for specific
situations. The conditions of handling, storage, use and disposal is beyond our control and may be beyond our knowledge.
OMB registration
None
HMIS HAZARD RATING
1
Health
1
Flammability
1
Reactivity
G
PPE
NSL1422 part B only page 1
FED-STD-313
Latest Revision
Type of Data Sheet
New X Revised
NSL1422RC Class A (part B)
Royal Adhesives & Sealants
N/A
Manufactured For:
Magnolia, TX
NRC License number
Date prepared
Name of Preparer
(800) 527-0011
14439
05/14/2007
Billy Matthews
On File
N/A
AMS-S-8802
N/A
Spec. Type
NSL1422RC Class A (part B)
Yes X
No
Hazardous items
(800) 424-9300 CHEM TREC
Mfgr. CAGE code
N/A
Manufactures Name
Spec. Grade.
Spec. Class
N/A
N/A
N/A
Common Name (s)
Manganese Dioxide
Other limits
By % weight
OSHA PEL
ACGHI TLV
N/E
< 65%
5 ppm
5mg /m
3
NIOSH #
CAS #
0P0350000
1313-13-9
Manganese Dioxide is in a wetted out dispersion exposure limits based on dust that is not present in this composition.
All remaining Constituents are non-hazardous per FED-STD-313 All Constituents are listed in TSCA inventory; complete mixture is excluded Per TSCA Para. 710.4
(d) 95 (6) (7) Constituents are not listed in TSCA 12b CORR. LIST
Boiling Point
N / Av.
2.0
PH
9
Non Volatile
Melting Point
N/A
N/A
Solubility in Water
Negligible
Not flammable
Unknown
2.0
N/A
Viscosity
Corrosion Rate:
1000 Poises
N/A
Temp
Material Reference
Blank
Black paste negligible oily odor
Non Volatile
> 930 C ----- > 2000 F TCC
Flammable Limits
LEL
N/A
UEL
N/A
Explosion hazard if heated with oxidizable materials
Stable
Unstable
Conditions to avoid
X
Neutralizing Agents
Easily oxidizable materials
May Occur
Will not Occur
N/A
Oxides of nitrogen, Carbon, manganese compounds
X
Conditions to avoid
None
N/A
Material:
Page 2
Date
05/14/2007
NSL1422RC Part B Manganese
NSL1422RC Page 2 part B only
Route (s) of entry
Inhalation?
Skin?
Ingestion?
Yes
No
Yes
Health Hazards (Acute and Chronic)
Impairment of central nervous system
Carcinogsnicity:
NTP?
IARC Monographs?
No
OSHA Regulated?
No
No
None known
Sluggishness, Sleeplessness, and / or Weakness in legs
Emergency and first aid Procedures:
Eyes: Flush with large amounts of water consult physician. Skin: wash with soap and water.
Ingestion: get immediate medical attention.
Dike and cover with non-oxidizable absorbent. Scoop up and transfer to container for reaction with base. Clean up remainder with
sand or non-oxidizable sweeping compound. Wash area with soap and water. Wear appropriate clothing and protective equipment.
(section VIII)
React with curing agent and dispose of as solid waste per Federal, State and local regulations
Keep container tightly closed, store in a dry location away from flammables (see Section VIII) wash hands thoroughly after handling
Other precautions:
When mechanically abrading the cured material use an organic vapor cartridge or air supplied respirator.
Ventilation:
Local exhaust
Special:
Air
N/A
Chemical resistant gloves
Other
Fan
N/A
Chemical goggles / face shield
49CFR X
IMO X
IATA X
IMDG
Marine Pollutant No
UN number
N /A
Shipping name:
ID Number
Reportable Quantity
N/A
N/A
Not regulated
Unit container
DOT Spec. container
< 20 gms. in plastic container
N/A
N/A
Hazard class:
Labels:
N/A
Not required
DOT Exempt /DOD CCN
Limited Quantity:
N/A
N/A
N/A
Incineration or land fill as is, or react with Part A dispose as solid waste
N/A
Sludge
Disposal methods:
When disposing of this material, the material must be handled, packaged and transported according to Federal, State or local
regulations
HMIS HAZARD RATING
Polysulfide Class B, Part A only
1
1
0
H
FED-STD-313
Latest Revision
OMB registration Number
None
Health
Flammability
Reactivity
PPE
Type of Data Sheet
New
X
Revised
NSL1422RC Class B (Part A)
Manufactures Name Royal Adhesives & Sealants
N/A
Manufactures Address (No Street, City, State and zip)
Magnolia, TX 77355
NRC License number
Hazardous items
Yes
Date prepared
Name of Preparer
(800) 527-0011
14439
No
(800) 424-9300 CHEM TREC
Mfgr. CAGE code
N/A
Billy Matthews
05/14/2007
On File
N/A
N/A
Spec. Type
X
AMS S-8802
Spec. Grade.
Spec. Class
II
B
B1/2 - B2 - B4
Common Name (s)
Other limits
Liquid polysulfide polymer (none CFR 1910.1200)
Toluene
By % weight
OSHA PEL
ACGHI TLV
NIOSH #
CAS #
< 70%
< 5%
N/E
100 ppm
N/E
50 ppm
None
None
68611-50-7
00108-88-3
All remaining Constituents are non-hazardous per FED-STD-313 All Constituents are listed in TSCA inventory; complete mixture is excluded Per TSCA Par. 710.4 (d)
95 (6) (7) Constituents are not listed in TSCA 12b CORR. LIST
Boiling Point
N/A
1.52
PH
NIL
8.5
NIL
Melting Point
NIL
Solubility in Water
Negligible
N/A
N/A
3.0
N/A
Viscosity
Corrosion Rate:
12000 Poises
N/A
Temp
Material Reference
Blank
White Paste / Polysulfide odor
13 grams / liter
> 930 C ----- > 2000 F TCC
Flammable Limits
LEL
N/A
N/A
Vapors are heavier than air and will collect at low points see (Section V)
Stable
Unstable
Conditions to avoid
Neutralizing Agents
X
Open Flame
Strong oxidizing agents
May Occur
Will not Occur
N/A
H2S, CO, CO2, SO2, Smoke
X
Conditions to avoid
N/A
UEL
N/A
Material:
Route (s) of entry
Inhalation?
Page 2
Date
05/14/2007
Skin?
Polysulfide Class B part A only
Ingestion?
yes
yes
Health Hazards (Acute and Chronic) Non established (possible skin irritation) not considered a primary skin irritant
INHALATION: vapor will irritate nose throat and respiratory tract, high concentration may cause dizziness
INJESTION: can cause irritation of the gastrointestinal tract
Carcinogsnicity:
NTP?
IARC Monographs?
NO
NO
yes
OSHA Regulated?
NO
None known
Skin or eye irritation
Emergency and first aid Procedures: Eyes: Flush with large amounts of water consult physician. Skin: wash with soap and water.
Ingestion: If swallowed induce vomiting get immediate medical attention.
Scoop up and transfer to container for reaction with curing agent. Clean up remainder with sand or sweeping compound.
Wash area with soap and water. Wear appropriate clothing and protective equipment. (section VIII)
Empty drums may contain explosive vapors
Store below 120 degrees dry area away from acids, oxidizers, open flame or other possible ignition sources
Other precautions:
When applying in any circumstances likely to produce airborne levels of solvent vapors in excess of the TLV or when mechanically
abrading the cured material use an organic vapor cartridge or air supplied respirator.
Ventilation:
Local exhaust
Special:
Air
Solvent resistant gloves
N/A
Other
Fan
N/A
Safety Glasses
49CFR X
IMO X
IATA
Shipping name:
Not regulated
Unit container
Hazard class:
X
ID Number
N/A
DOT Spec. container
N/A
IMDG
Marine Pollutant No
Reportable Quantity
UN number
N/A
N/A
Labels:
N/A
DOT Exempt /DOD CCN
Not required
Limited Quantity:
N/A
N/A
N/A
Incineration or land fill as is, or react with Part B dispose as hazardous solid waste
D-001 ignitable
Sludge
Disposal methods:
Incineration or land fill, The material must be handled, packaged and transported according to Federal, State or local regulations
OMB registration
None
NSL1422RC part B only page 1
FED-STD-313
Latest Revision
HMIS HAZARD RATING
1
Health
1
Flammability
1
Reactivity
G
PPE
Type of Data Sheet
New X
Revised
Manufactures Name
NSL1422RC (part B)
Royal Adhesives & Sealants
Manufactured For:
N/A
Magnolia, TX
NRC License number
Date prepared
Name of Preparer
(800) 527-0011
14429
Billy Matthews
X
05/14/2007
On File
N/A
AMS-S-8802
N/A
Spec. Type
NSL1422 (part B)
Yes
No
Hazardous items
(800) 424-9300 CHEM TREC
Mfgr. CAGE code
N/A
Spec. Grade.
Spec. Class
N/A
N/A
N/A
Common Name (s)
Manganese Dioxide
Other limits
By % weight
OSHA PEL
ACGHI TLV
N/E
< 65%
5 ppm
5mg /m
3
NIOSH #
CAS #
0P0350000
1313-13-9
Manganese Dioxide is in a wetted out dispersion exposure limits based on dust that is not present in this composition.
All remaining Constituents are non-hazardous per FED-STD-313 All Constituents are listed in TSCA inventory; complete mixture is excluded Per TSCA Para. 710.4
(d) 95 (6) (7) Constituents are not listed in TSCA 12b CORR. LIST
Boiling Point
N / Av.
2.0
PH
9
Non Volatile
Melting Point
N/A
N/A
Solubility in Water
Negligible
Not flammable
Unknown
2.0
N/A
Viscosity
Corrosion Rate:
1000 Poises
N/A
Temp
Material Reference
Blank
Black paste negligible oily odor
Non Volatile
> 930 C ----- > 2000 F TCC
Flammable Limits
LEL
N/A
UEL
N/A
Explosion hazard if heated with oxidizable materials
Stable
Unstable
Conditions to avoid
X
Neutralizing Agents
May Occur
Will not Occur
N/A
Oxides of nitrogen, Carbon, manganese compounds
X
Conditions to avoid
None
N/A
Material:
Page 2
Date
06/07/04
NSL1422RC Part B Manganese
NSL1422RC Page 2 part B only
Route (s) of entry
Inhalation?
Skin?
Ingestion?
no
No
Yes
Health Hazards (Acute and Chronic)
Impairment of central nervous system
Carcinogsnicity:
NTP?
IARC Monographs?
No
OSHA Regulated?
No
No
None known
Sluggishness, Sleeplessness, and / or Weakness in legs
Emergency and first aid Procedures:
Eyes: Flush with large amounts of water consult physician. Skin: wash with soap and water.
Ingestion: get immediate medical attention.
Dike and cover with non-oxidizable absorbent. Scoop up and transfer to container for reaction with base. Clean up remainder with
sand or non-oxidizable sweeping compound. Wash area with soap and water. Wear appropriate clothing and protective equipment.
(section VIII)
Keep container tightly closed, store in a dry location away from flammables (see Section VIII) wash hands thoroughly after handling
Other precautions:
When mechanically abrading the cured material use an organic vapor cartridge or air supplied respirator.
Ventilation:
Local exhaust
Special:
Air
N/A
Chemical resistant gloves
Other
Fan
N/A
Chemical goggles / face shield
49CFR X
IMO X
IATA X
IMDG
Marine Pollutant No
UN number
N /A
Shipping name:
ID Number
Reportable Quantity
N/A
N/A
Not regulated
Unit container
DOT Spec. container
< 20 gms. in plastic container
N/A
N/A
Hazard class:
Labels:
N/A
Not required
DOT Exempt /DOD CCN
Limited Quantity:
N/A
N/A
N/A
Incineration or land fill as is, or react with Part A dispose as solid waste
N/A
Sludge
Disposal methods:
When disposing of this material, the material must be handled, packaged and transported according to Federal, State or local
regulations
PMA CROSS REFERENCE CHART
FAA PMA Sealant Cross Reference Chart
PMA Part Number
Class
PRC/PPG Product
PMA No. / Supplement No.
NSL870
B1/2, B2, B4
P/S 870
PQ3886CE/ 28
NSL890RC
A1/2, A2, B1/2, B2, B4
P/S 890
PQ3886CE/ 28
NSL1422
A1/2, A2, B1/2, B2
PR-1422
PQ3886CE/ 18
NSL1422RC
A1/2, A2, B1/2, B2
PR-1422
PQ3886CE/ 28
NSL1428
B1/2, B2
PR-1428
PQ3886CE/ 18
NSL1440RC
A1/2, A2, B1/2, B2
PR-1440
PQ3886CE/ 28
NSL1750
B1/2, B2
PR-1750
PQ3886CE/ 18
NSL1776M
B1/2, B2
PR-1776M
PQ3886CE/ 28
FAA PMA Silicone Cross Reference Chart
PMA Part Number
GE-Momentive / Dow Corning Product
PMA No. / Supplement No.
AS106
GE106, Dow Corning 736
PQ3886CE/ 13
AS112
GE112
PQ3886CE/ 3
AS116
GE116
PQ3886CE/ 3
AS118
GE118
PQ3886CE/ 3
AS157
PQ3886CE/ 3
AS159
GE159, GE106, Dow Corning 736
PQ3886CE/ 3
AS3145 & AS3145P
PQ3886CE/ 3
(800) 527.0011

NSL Aerospace - NSL1422RC Airline PMA Approval Packet

Transcription

Similar documents

NSL Aerospace - NSL1422 Airline PMA Approval Packet

( ) * + +- , - -> . 0 1 10 100 1000 10cc