4GB DIGITAL MP3 PLAYER WITH LCD BACKLIGHT DISPLAY 4GB

4GB DIGITAL MP3 PLAYER
WITH LCD BACKLIGHT
DISPLAY
Owner's Manual
PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
Model: CMP1230F
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital
with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These
limits are designed to provide residential protection against harmful interference in
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not Installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception. which can
be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Receiver or relocate the receiving antenna.
z
z
Increase the separation between the equipment and receiver.
z
Connect the equipment into an outlet on te circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
z
FCC NOTICE:
To assure continued compliance, follow the attached installation instructions and use only
shielded cables when connecting to other devices. Modifications not authorized by the
manufacturer may void user’s authority to operate this device.
1
IMPORTANT SAFETY INSTRUCTIONS
This manual contains important safety precautions and information
for correct usage. Please be sure to read this manual carefully
before use to avoid any damages to the device.
z
z
z
z
z
z
z
Please do not place the product in hot, wet or dusty
environment.
Avoid dropping or clashing the product.
Please select a suitable volume and avoid loud sound while
using earbuds. Please turn down the volume or stop using if
you get a roaring in your ears.
Please do not disconnect the device while formatting,
downloading and uploading; otherwise it may cause
application errors.
Please do not disassemble the product personally, and avoid
cleaning the product with ethyl alcohol, thinner.
Do not use this product in the areas which prohibit use of
electronic devices, for example, in airplane.
Please do not use this product while driving or walking in the
street, or it might cause an accident.
NOTES: This device does not support waterproof function.
2
LOCATION OF CONTROLS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
LCD Display
Phones Jack
Play/Pause/Stop Button
Wrist Strap Holder
VOL (Volume) +/- Buttons
Hold Switch
MODE Toggle Switch
Built-in Microphone
USB Plug
Cover of USB plug
3
Battery Installation
Install or replace the battery when the battery
Battery Full
Battery low
indicator is showing low power(see the icons
on the right) as follows:
1. Open the battery door on the rear of the unit by
sliding it out.
2. Insert 1(one) AAA battery (not included) as shown
after figure and the polarity marking inside battery compartment.
3. Slide in the battery door.
NOTE: Alkaline batteries are recommended for longer playing time.
BATTERY PRECAUTIONS
Follow these precautions when using battery in the device:
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing, the battery as
indicated. As reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together(e.g. Alkaline and
Carbon –zinc) or old batteries with fresh ones.
4. If the batteries in the device are consumed or the device is not to be
used for a long period of time, remove the batteries to prevent damage
or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can
overheat and rupture.(Follow battery manufacturer’s directions.)
6. Do not dispose of batteries in fire,batteries may explode or leak.
7. Clean the battery contacts and also those of the device prior to battery
installation.
4
Downloading and Transferring Files
Pull out the cover of the USB Port on the Player as the figure below then
connect the Player to the USB Port on the PC. Download MP3/WMA files into
the unit.
Power On/Off
1. Press and hold the
Button for approximately 2 seconds to power on
the unit.
2.To power off, press and hold the
Button until “Bye-Bye” appears on
the display then release the button.
Earbuds
Insert the supplied Earbuds to the Phones Jack on the unit.
NOTE: Please select a suitable volume and avoid loud sound while using
5
earbuds. Please turn down the volume or stop using if you get a roaring in
your ears.
Hold Switch
To avoid pressing any buttons during playback, lock the buttons on the unit
by:
will appear on the
～ Sliding the Hold Switch to Hold position,
display a few seconds then all the buttons on the unit will not be
functioning.
～ To release the lock, slide the switch to opposite position.
Lyric Indicator
During playback, if the Lyric indicator on the display is from（
） turn to
( ). It means the lyric of the current song is available . Press and hold
the MODE Toggle Switch until the correspondence lyric appear on
the display. Press and release the MODE Toggle Switch again to exit.
6
Indicators on the display:
When a song is selected, the following screen will appear on the
display.
1
2
3
4
5
6
7
8
9
10
Current Song’s Name and Information
Lyric Indicator
Format and Bitrate of Current Track
Repeat mode
Current Track Number.
Total Number of Tracks.
EQ Mode
Elapsed Time of Current Track
Total Time of Current Track
Battery power meter
7
Main Menu
When power on the unit, the main menu will appear on the display as
below:
Slide and release the
desired menu.
MODE
Toggle Switch to left or right to select
SYS(Systems)
～ If SYS (System) is selected, press the MODE Toggle Switch to
enter.
～ Slide the MODE Toggle Switch to left or right to select the desired
icon then press the MODE Toggle Switch to enter.
～ Slide the MODE Toggle Switch to left or right to set or reset. Press
the
MODE
Toggle Switch to confirm the setting and exit to
previous menu.
～ Press and hold the MODE Toggle Switch to exit to main menu.
1. In “Backlight” setting menu
Backlight
Set backlight auto turn off timer to 0 (Backlight will not
turn off) or 3-30 seconds as desired.
2. In “Language” setting menu
Language
Set the on screen display language as desired.
8
3. In “Power off “setting menu
Off time
Set the auto power off (when idle) timer to 0 (the unit
will not turn off automatically when idle) or 1, 2, 3, 4
minutes as desired.
Sleep
Set the sleep timer to 0 (Sleep timer will not function) or
time
10-120 minutes as desired.
4. In “Contrast” setting menu
Contrast
Set the Contrast level from 1-15 as desired.
5. In “Memory info” setting menu
Memory
Read the status of internal memory.
info
6. In “Firmware version” setting menu
Firmware
Read the information of the software.
version
7. In “Exit” setting menu
Exit
Press the
MODE
Toggle Switch to exit.
MSC( Music) Playback
If MSC (Music) is selected, press the MODE Toggle Switch to enter,
the information of current file will appear on the display. Press the
Button to start playback.
1. During playback, press the Volume +/- button to increase/decrease
volume sound level.
2. During playback, press the
normal playback.
Button to pause, press again to resume
9
3. During playback, slide the
skip the tracks.
MODE
Toggle Switch to left or right to
4. During playback, slide the MODE
hold to fast search the specific track.
Toggle Switch to left or right and
5. When finished listening, press and hold the
appear on the display to power off the unit.
Button until “Bye-Bye”
6. Press the MODE Toggle Switch in the stop playback mode, the
sub-setting menu will appear on the display as below:
Using the
Locator
folder
Deleted
MODE
Toggle Switch to set or reset as below:
·Slide and release the MODE Toggle Switch to left
or right to select the desired folder/songs then press the
the
MODE
Toggle Switch to confirm your
selection.
·The information of the selected file will appear on the
screen.
·Press the Button to start playback.
· If Deleted is selected, press the MODE Toggle
Switch to enter, ＂NO＂will appear on the display.
· Slide and release the MODE Toggle Switch to left
or right to select ＂YES＂or ＂NO＂ then press the
MODE Toggle Switch to confirm your selection.
· If YES is selected, press the
MODE
Toggle
10
Delete all
Exit
Switch to delete the current song.
· If No is selected. Press the MODE Toggle Switch
to exit.
· Repeat the same procedures until all the specific tracks
were deleted.
· If ＂Delete all ＂is selected, press the MODE
Toggle Switch to enter, ＂ NO ＂ will appear on the
display.
· Slide and release the MODE Toggle Switch to left
or right to select ＂YES＂or ＂NO＂ then press the
MODE Toggle Switch to confirm your selection.
Press the
MODE
previous menu.
Toggle Switch to return to
7. During playback, press the
MODE Toggle Switch, the sub-setting
menu will appear on the display as below:
Using the
Repeat
MODE
Toggle Switch to set or reset as below:
Normal
Repeat One
Folder
Repeat Folder
Repeat All
Play all the tracks in the player one by
one.
Play the current track repeatedly.
Play the tracks in the current folder one
by one and then stop.
Play the the tracks in the current folder
repeatedly.
Play the tracks in the unit repeatedly.
11
Random
Playback the tracks in the current folder
randomly.
Play the first 10 seconds of each tracks
in the current folder.
Set the Equalizer modes to Natural ; Rock ; Pop ; Clas
sic ; Soft ; Jazz or DBB as desired.
· Press the MODE Button to enter, the display will
resume to normal display and the Letter "A" of A-B
replay indicator will blink.
Intro
Equalizer
Replay
· Slide the MODE
toggle Switch to right to define the
beginning of AB replay.
· Slide the switch again to define the end of AB replay then
the unit will start playback the selected section
repeatedly.
Exit
· To stop AB replay, press the MODE Toggle Switch.
The unit will resume to normal playback.
Press the MODE toggle Switch to return to previous
menu.
Voice Recording
1. In main menu, slide the MODE Toggle Switch to left or right to
select REC (Record) then press the MODE Toggle Switch to enter.
Wait until the following picture appear on the display:
12
2. Press Button to start recording then speak into the Microphone at
normal tone of voice.
3. During recording, press the
recording.
Button to pause, press again to resume
4. When finished, press and hold the
Button until "SAVING ..." appear
on the display to save the recordings.
Playback the voice recording files
1. In main menu, slide the MODE Toggle Switch to left or right to
select RPL (Recording Playback) then press the MODE Toggle
Switch to enter. The information of the 1st recording file will appear on
the display.
2. Slide the MODE Toggle Switch to left or right to select the desired
recording file then press the Button to start playback
3. Other operations are same as playback music files.
13
SPECIFICATIONS
Built in flash
memory
Power source
Audio
frequency
Music
format
Compatible
Recording
format
Support
compress
rate
Support OS
4GB( Due to some memory being used for internal
operation, only approx 3.71GB memory is available for
download)
DC
1.5V, 1 x AAA size battery (Not included)
20Hz～20KHz
MP3,WMA
WAV, 32kbps
30kbps-256kbps,VBR
Mac OS 10; Linux 2.4.2; Win 98/SE/2000/XP/Vista/
WIN 7
Specifications are subject to change without notice.
Acessories:
1x Instruction Manul
1x Stereo Earbuds
14
LIMITED WARRANTY
Craig warrants this product to be free from manufacturing defects in
material and workmanship under normal use for a period of 90 days
from date of purchase. If service is required, please return the product
to the store where it was purchased for exchange; or, pack the unit in
the original packing material with all accessories if applicable, a copy
of your sales receipt and a Cashier’s check or Money Order for $7.00
(to cover shipping and handling costs) payable to Craig Electronics
Inc. For consumers in Canada, please make sure that the cashier
check or money order is redeemable through a U.S. bank. Ship your
product freight pre-paid. Your unit will be repaired, replaced or if the
unit can not be repaired or replaced, a refund will be forwarded to you
within four weeks of receipt of your unit. Please ship your unit to:
Craig Electronics Inc.
1160 NW 163 Drive
Miami, Fl 33169
This warranty is void if the product has been: a) Used in a commercial
application or rental. b) Damaged through misuse, negligence, or
abuse. c) Modified or repaired by anyone other than an authorized
Craig service center. d) Damaged because it is improperly connected
to any other equipment.
Note: This warranty does not cover: a) Ordinary adjustments as
LIMITED WARRANTY (CONTINUED)
outlined in the Owner’s Manual which can be performed by the
customer. b) Damage to equipment not properly connected to the
product. c) Any cost incurred in shipping the product for repair.
d) Damage to the product not used in the USA.
This warranty is not transferable and only applies to the original
purchase. Any implied warranties, including the warranty of
merchantability, are limited in duration to the period of this expressed
warranty and no warranty whether expressed or implied shall apply to
the product thereafter.
Under no circumstance shall Craig be liable for any loss or
consequential damage arising out of the use of this product. This
warranty gives specific legal rights. However, you may have other
rights which may vary from state to state. Some states do not allow
limitations on implied warranties or exclusion of consequential
damage. Therefore, these restrictions may not apply to you.
To Obtain Service on your Product
email:[email protected]
Printed in China
CMP1230F-IB-E0CS1-B0US