ONLINE ONLY AUCTION - MyEquipAuctions.com

Transcription

www.myequipauctions.com
industrial division
construction
division
the weekly digital marketplace for construction auctions
the weekly digital marketplace for industrial auctions - August 13, 2015
EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT
FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS •
EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT
industrial
division
AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS
• EQUIPMENT
FOR SALE •
HARDWARE
STAMPING
SHOP
4116 First Ave., Brooklyn, New York 11232
FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS •
EQUIPMENT FOR
SALE • EQUIPMENT
AUCTIONS
EQUIPMENT
SALE • EQUIPMENT
Tuesday,
September
1st •• 2:00
P.M.FOR
(EDT)
AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE •
Monday, August 31st from 8:00 A.M. to 4:00 P.M.
FEATURING: FOR SALE • EQUIPMENT AUCTIONS •
FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT
HYDRAULIC PRESS: Komatsu Mdl. CBS45-3 45 Ton Capacity Hydraulic Press • OBI PRESSES: 75 Ton V&O OBI
EQUIPMENT FOR
EQUIPMENT
AUCTIONS
EQUIPMENT
SALE
Press,SALE
[4] 60 Ton•
V&O
Super OBI Presses, 60 Ton
Capacity E.W. Bliss•
Mdl.
C-60 OBI Press, 45 TonFOR
Bliss Mdl.
C-45 • EQUIPMENT
OBI Press, 45 Ton V&O Super OBI Press, 22 Ton E.W. Bliss Mdl. C-22 OBI Press, [2] 35 Ton Capacity E.W. Bliss OBI
AUCTIONS • EQUIPMENT
FORBlissSALE
• C-35
EQUIPMENT
• EQUIPMENT
FOR SALE •
Presses, [2] 35 Ton Capacity
Israel Mdl.
OBI Presses, 35 TonAUCTIONS
Capacity V&O OBI Press,
22 Ton Capacity
Bliss Mdl. C-22 OBI•Press,
[2] Bliss Mdl. 20C Mechanical
Clutch OBI
Presses, Famco Multiformer
Mdl. 59-5 OBI • EQUIPMENT
EQUIPMENT AUCTIONS
EQUIPMENT
FOR SALE
• EQUIPMENT
AUCTIONS
Press, Toledo Bench Type OBI Press • PRESS FEED EQUIPMENT: 4000# Capacity Littell Mdl. 40-18 Power Uncoiler,
[2] 2000# Capacity Littell
Power Uncoilers ••ROLL
FORMER: Rafter 8-Stand
Roll Former
• VERTICAL
MILLS: Sharp
FOR SALE • EQUIPMENT
AUCTIONS
EQUIPMENT
FOR
SALE
• EQUIPMENT
AUCTIONS •
Vertical Milling Machine, Bridgeport Series J Vertical Milling Machine • LATHE: LeBlond Regal 14” x 15” Geared
EQUIPMENT FOR
SALELathe
• •EQUIPMENT
AUCTIONS
• EQUIPMENT
SALE
Head Engine
SAWS: Powermatic Mdl.
87 19-1/2” Vertical Bandsaw,
Ingco Mdl. KT-300FOR
10” Mitre
Cold • EQUIPMENT
Saw, Craftsman Mdl. 137.218072 10” Bench Mounted Table Saw, Walker Turner 12” Diameter Radial Arm Saw •
AUCTIONS • SURFACE
EQUIPMENT
FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR
GRINDERS: Reid Mdl. HYB 6” x 18” Power Feed Surface Grinder, Gallmeyer & Livingston Mdl. 25 6” x 18”
Power Feed Surface
Grinder • DRILLS:
Arboga Maskiner Mdl. E380
20” Geared
Head •
Drill EQUIPMENT
Press, Clausing Mdl.
SALE • EQUIPMENT
AUCTIONS
•ABEQUIPMENT
FOR
SALE
AUCTIONS •
2276 20” Floor Type Drill Press, Walker Turner 20” Floor Type Drill Press • SHEAR: Pexto Mdl. F7072-44 36” Power
Shear SALE
• BENDERS:
Mdl. L5 PneumaticAUCTIONS
Bender, Pneumatic Horizontal
Bender • BRAKES: FOR
Whitney Jensen
EQUIPMENT FOR
• Lubow
EQUIPMENT
• EQUIPMENT
SALE • EQUIPMENT
18” Press Brake, Chicago Mdl. 253 50” Mechanical Press Brake • BENCH TYPE PUNCH PRESS: Perkins Bench Type
AUCTIONS • Punch
EQUIPMENT
FOR
SALETimesaver
• EQUIPMENT
AUCTIONS
EQUIPMENT FOR
Press • BELT SANDERS
& POLISHERS:
Mdl. Minibelt 948 9” Wide
Belt Sander, Burlington•Sander
23-1/2” Belt Sander, [2] Pedestal Mounterd Double End Buffing Jacks • SPOT WELDERS: Taylor Winfield 44” 100SALE • EQUIPMENT
AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS •
KVA Press Type Spot Welder, Lors Mdl. 721 100-KVA 4-Head Automatic Spot Welder, Lors Mdl. 140AP-DV 24” 40-KVA
www.bidspotter.com/forms/event.php?event=16035
Press Type
Spot Welder,
Ames Weld Mdl. 340SDA
24” 40-KVA
Rocker•
Arm
Spot Welder, Sterling Mdl.
SP18ASB
18” • EQUIPMENT
EQUIPMENT FOR
SALE
• EQUIPMENT
AUCTIONS
EQUIPMENT
FOR
SALE
40-KVA Press Type Spot Welder, American 30-KVA Butt Welder, American Industrial Mdl. AP40-14 14” 40-KVA Press
AUCTIONS • Type
EQUIPMENT
FORMdl.SALE
• EQUIPMENT
• EQUIPMENT FOR
Spot Welder, Taylor Winfield
FWB-18-50A1
24” 50-KVA 4-Head PressAUCTIONS
Type Spot Welder • WELDERS:
[2] Miller Syncrowave 250 AC/DC Welding Power Sources, Miller Dialarc 250 AC/DC Welding Power Source, Miller
SALE • EQUIPMENT
AUCTIONS
EQUIPMENT
FOR
SALE
• ST
EQUIPMENT
AUCTIONS •
Mdl. CP-302 300-Amp
CV/DC Welding•Power
Source • HEAT TREATING:
KH Huppert
Co. Mdl.
6kw Electric Fired
Furnace,
Thermoline
Electric
Mdl.
F-A1630-1
Electric
Furnace
•
LARGE
QUANTITY
OF
MISCELLANEOUS
SHOP
ITEMS!!
http://www.bidspotter.com/en-us/auction-catalogues/koster-industries/catalogue-id-bscko10136
AUCTIONS • EQUIPMENT FOR
SALE • EQUIPMENT AUCTIONS
• EQUIPMENT FOR
For complete listings
Register To Bid Online At:
SALE • EQUIPMENTBuyer’s
AUCTIONS
• EQUIPMENT
AUCTIONS •
our website
Premium Applies • EQUIPMENT FOR SALE check
For more information visit our website www.kosterindustries.com
AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR
40 Daniel Street • Farmingdale, N.Y. 11735
SALE • EQUIPMENT AUCTIONS • EQUIPMENT
FOR SALE • EQUIPMENT AUCTIONS •
Tel: 631-454-1766 • Fax: 631-454-1779
EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS
• EQUIPMENT FOR SALE • EQUIPMENT
www.kosterindustries.com
email: [email protected]
AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT
AUCTIONS • EQUIPMENT FOR
SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS •
INDUSTRIAL
AUCTIONS
EQUIPMENT
FOR SALE
• EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT
1
AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR
ONLINE ONLY AUCTION
Online Bidding Powered By
Visit Us and Start Bidding Now!
www.myequipauctions.com
industrial division
Click Here to Visit our
http://www.industrialmachinetrader.com/calendar/AuctionsCalendar.cfm?calendar_type=AU
Auction Calendar
INDEX
Browse the publication
page-by-page to view all
industrial auctions
- OR -
Click below to go directly to the
region of your choice.
Looking for a specific piece of equipment?
Use the search button located at the bottom of each page
to directly link you to the equipment you need.
East
South
Midwest
West
Online/International
2
3
South
Online Liquidation
At The Request Of Carver Precision
-Tool & Die / Mould Facility-
ENDS: AUG 26, 2PM CST
FEATURING:
Late Model VMC'S - Vertical Mills - Bandsaws - Jig Grinders & Surface Grinders
142 Volunteer Drive,
Hendersonville, Tennessee
Phone: 615-383-8703
[email protected]
farming division
construction division
4
industrial division
South
INTERNET ONLY AUCTION
13903 E. Smith Drive, Unit 1 • Aurora, CO 80011
THURSDAY • AUGUST 20th • 10:00 A.M.
Inspection: August 19th from 9:00am - 4:00pm
TUf mAChININg - RETIREmENT AUCTION
Bridgeport EZ-Path CNC Lathe
Milltronics VM17 CNC
Machining Center
Bridgeport Series I
CNC Milling Machine
Auction Featuring:
Milltronics VM17 CNC Machining Center, 20-Tool ATC
Bridgeport EZ-Path CNC Lathe, w/ EZ-Path Controls
Summit 18”x72” Engine Lathe, 3” Spindle Hole
Summit 19”x80” Engine Lathe, 19”x80”, 4” Spindle Hole
Summit 17”x60” Engine Lathe, 3” Spindle Hole
(2) Monarch 10EE Toolroom Lathes, 12.25”x20”, w/ Tooling
Summit Engine Lathe
Bridgeport Series I CNC Milling Machine w/ Boss 9 Controls
Lagun FTV-4 Vertical Milling Machine
Lagun 1/S Vertical Milling Machine
Maxmill YC12VA Vertical Milling Machine
(2) Peterson VPF-21 Horizontal Milling Machines
Continental IS-1001 Horizontal Bandsaw
Brown & Sharpe 618 Micromaster Surface Grinder
Cincinnati #2 Tool & Cutter Grinder
Monarch Toolroom Lathe
Plus: Welding Equipment, Air Compressors, Tooling,
Inspection Equipment, Metal Inventory & More!
Bid Online at www.RollerAuction.com
farming division
Roller & Associates, Inc.
7500 York Street • Denver, Colorado 80229 • (866) 515-1668 • www.rollerauction.com
industrial division
5
South
2 HUGE STORAGE AUCTIONS
SATURDAY AUG 29th
2 UPCOMING AUCTIONS
SATURDAY • SEPTEMBER 5TH
COLUMBUS/FOREST LAKE MN
TOOLS, AUTOS, EQUIPMENT
AUCTION #1 9 AM
at STORAGE MASTERS • GOLDEN GEM DR, OFF HWY 19 IN UMATILLA
THE OWNER OF THIS PERSONAL PROPERTY HAS REQUESTED THIS 1600sf
STORAGE UNIT TO BE AUCTIONED OFF IN IT'S ENTIRETY! THIS UNIT IS
LOADED FLOOR TO CEILING, WALL TO WALL, WITH LOTS AND LOTS AND
LOTS OF STUFF!! AT THE CONCLUSION OF THIS SALE, WE WILL TRAVEL
JUST MINUTES TO:
AUCTION #2 10 AM AN ABSOLUTE AUCTION
LOCATED AT THE UMATILLA AIRPORT
HANGER #7 ON ROSE ST IN UMATILLA, FL
THE CONTENTS OF THIS UNIT, INCLUDE 1 GORTON, 4 DECKEL, 1 ALEXANDER PANTOGRAPHS, 2 KILNS/OVENS (ONE BLUELINE CFD12), A COVER
MFG 512 GRINDER, OTHER STAMPERS, GRINDERS, STEEL CUTTERS, A
10TN AC (?), MANY BOX LOTS, TOOLS, HI SPEED DRILL BITS, BAND SAW,
DRILL PRESSES, RADIAL ARM SAW, HAND TOOLS, POWER TOOLS, METAL
SHELVING, METAL CABINETS, A VW ENGINE, LOTS OF "PECKY CYPRESS",
HAND CARTS, BARREL, CARTS, LOTS OF ELECTRICAL AND PLUMBING
SUPPLIES, SMALL REFRIGERATOR, 15' PORPOISE 2 SAILBOAT, ORGANIZERS, BENCHES, TABLES, TOOL BOXES, CHAIRS, AND A WHOLE LOT MORE!
TO BE AUCTIONED BY THE PIECE, BOX TABLE, UNTIL ALL IS SOLD! 1000'S
OF ITEMS TO BE DISPOSED OF!
FOOD AND BEVERAGES AVAILABLE.
BY: ABINGDON AUCTIONS, LLC.
2645 SR 19 TAVARES, FL
13% BP
Lic # (AB2985)
352-508-5522
WWW.AUCTIONMYBIZ.COM
VISA - MC - CASH • BRING YOUR TAX EXEMPT CERT
FRIDAY • SEPTEMBER 11TH
RUSH CITY MN
109 ACRES OF HUNTING & PASTURE LAND
John R. Carlson
763-238-6049
www.midwestauctions.com
PUBLIC AUCTION-SATURDAY
October 3rd, at 9 AM Machinery & Equipment Absolute
12 noon real estate with 15 plus acres.
Includes 25,000 sq ft building. Reserve
Located 25 mi. West of Peoria, lL on State Rd. 116 near Farmington, IL. Great satellite location
for Peoria, Springfield, Chicago, and St. Louis areas. See pictures, virtual tour, details, terms
and conditions of fabrication shop, auction, and information. Absolute on the machinery and
equipment reserve on the real estate.
See it all at www.auctionzip.com enter ID# 3641
~auctions conducted by~
KIESEWETTER AUCTION SERVICES
Ph: 309-699-3800- E-mail: [email protected]
IAL # 440000377, FAL # AU3603
6
farming division
industrial division
industrial division
804
433 Council Drive, Fort Wayne, Indiana 46825
Live Internet Bidding
Under the Management of
IN Auction License #AC68900001
www.CharlestonAuctions.com
Call: 877-357-8124 • 260-373-0850 • Fax: 260-373-0854
HardiNgE MOdEL HSL-59 LatHE
EvErYThING
MUST SEll
rEGArdlESS
Of PrICE!
FEATURED EQUIPMENT:
JLG COMMANDER SCISSOR LIFT, MODEL CM-1432, MAXIMUM HEIGHT
14’, MAXIMUM LOAD 500LB, 24 VOLT, SN C0031300200009671-LARGE
QTY OF PALLET RACKING, -HIGHLIGHT SYNERGY 3 PALLET STRETCH
WRAPPER -SELCO CARDBOARD BALER, MODEL V5-110, SN-040067337
-HANDLING SYSTEMS ½ TON GANTRY CRANE, -GORBEL 250 LB JIB
CRANES - GORBEL 4,000 LB BRIDGE CRANE, 60’X20’X20’ -SIMPLEX 10 TON
HYRAULIC H FRAME PRESS -RIDGID 300-T2 PIPE THREADER, SN-ED 69896
CO1, -DAYTON 2X6” BELT AND DISC SANDER -10 TON BRIDGE CRANE WITH
10 TON ELECTRIC CABLE HOIST, -LARGE QUANTITY OF PALLET JACKS -LARGE
QUANTITY OF CARTS, LIFT CARTS, CONVEYOR CARTS -LARGE QUANTITY OF
PAN SHELVING -LARGE QUANTITY OF PALLET RACKING, -WESCO, DANDY
(1 Of 3) MiyaNO BNC LatHES
AND PRESTO ELECTRIC LIFT CARTS -LARGE QUANTITY OF FASTENERS
MiLaCrON THURSDAY,
CiNtUrN 8
Niagra
tON PrESS
LOTS BEGINCiNCiNNati
CLOSING
SEPTEMBER 3RD
• 150
10AM
COMPLETE GE ENERGY FACILITY
(1 Of 4) MiNStEr P2-100 PiECE-MaKEr PrESSES
farming division
e)
AUCTION
O N L I N E O N LY
Midwest
7
Midwest
UPCOMING AUCTIONS
Wednesday
August 19th, 26th, Sept
2nd & 9th
CONSTRUCTION
AGRICULTURAL • TRANSPORTATION
OVER 1,500 ITEMS TOTAL!
toll-free (800) 937-3558
www.BigIron.com
farming division
8
industrial division
Midwest
MACHINE SHOP POWER EQUIPMENT • POWER & HAND MACHINIST TOOLS • WELDER
POWER CUTTING BAND SAWS
AUCTION LOCATION: 1481 240th Street West, Farmington, MN.
From Farmington, MN south on State Hwy. 3 - 1.5 miles to 240th St.
West, turn east on 240th St. West approx. 2 miles; or just north of
Northfield on State Hwy. 3. Watch for auction signs.
Sat., Sept. 12, 2015
9 A.M. SHARP
ENCO MILLING & DRILLING MACHINE, ENCO METAL
LATHE, ENCO DRILL PRESS, CIDAN POWER SHEAR,
WYSONG 20-TON PRESS BRAKE, MACHINIST TOOLS,
WELDERS, TOOL CABINETS, POWER TOOLS
Enco 2VS mill, 42" with many accessories and digital readout,
3-phase; Enco 1340 metal lathe w/acc., 3-phase; Wysong Model
2052, 20-ton press brake, 3-phase, with tooling; Phase converter;
Enco Model 2650 variable speed drill press; Cidan Model MS-F
13/3,0 50" power shear, 1/8" steel; 12" Rotary table (works with
Enco mill); 6" Milling vise; Large assort. of punches, dies; Large
assort. of milling and drilling bits; Many Precision measuring tools
and dials, indicators, micrometers; 24" Precision height gauge;
Large tap & die set; Dayton 2-ton arbor press; Hand power sheet
metal notcher; Miller Matic 200 wire feed welder; Miller insert gas
welder; Miller Tig welder; Century AC-DC 250 amp welder; Harris
Oxy acetylene torch; Honda 20 hp elec. start, 12,000 watt generator
on Honda wheel cart; Tremmel crane 20'x10' tall on shop 4-wheel
base w/chain hoist; Steel welding table, 48"x41"; (2) Metal cutting
band saws, floor model 7"x12" and 5"x8"; 24"x36" Granite surface
plate w/stand. Tool chest; (2) Tool cabinets, 40-drawer – Several
upright tool cabinets; Several tool carts; Craftsman tool cabinet;
MATT MARING
CO.
Porter Cable FC350 nail; Paslode pneumatic stapler, 1½" w/boxes
of staples; Craftsman 3D router pantograph 1½"; Craftsman spray
gun; DeWalt reciprocating saw; Carbide tool grinder; Milwaukee
right angle grinder; Shop vacuums; Pallet jack; Socket sets, driver
set, large assort. hand tools; Sandblasting pot; Floor jack, 3,000 lbs.;
12-ton hyd. bottle jack; C-clamps; 5 hp air compressor; Air tools;
Electric motors; Large amount of shop hardware and supplies; Large
amount of shop steel, sheets, tubes, flute, etc.; Dietzgen surveyor's
transit and tripod; Woodworking tools; Hydraulic Porta Power;
Stock metal and steel.
This is only a partial list. All items are in excellent condition and
very clean. TERMS: Cash, check, all major credit cards. 10%
buyer's fee. All sales final.
www.maringauction.com
Orren & Margarete Lucht
owners/sellers
We Sell the Earth & Everything On It.
Live and Online Auction
www.proxibid.com/maring auction
proxibid
®
ABSOLUTE AUCTION
FRIDAY, OCTOBER 2ND • 9AM
LARGE PUBLIC
AUCTION!
MATT MARING AUCTION
CO. INC.
Kenyon, MN 55946
507-789-5421 • 800-801-4502
Matt Maring, Lic. #25-28 • 507-951-8354
AUCTION
Machine Tools Masters, Inc. Pensacola FL
Complete Wall to Wall Liquidation
CNC Machine Shop: Machinery, Equipment, Tools,
Dsl. Truck, Forklift & More
Business Owner Retirement Auction
ONLINE ONLY AUCTION – OVER 800 LOTS
Auction Closes Sept. 1, starting at 10AM cdt
Preview: Aug. 28 & Aug. 31, 9AM – 4PM
BoylestonAuctions.com
Ted Everett Auctioneers
11998 North State Road 39, Monrovia, IN
Phone: (317) 996-3929
Partial List: 1996 Dodge Laramie SLI Ram 2500 Cummins Turbo Dsl. Caterpillar LP
Forklift, Monarch Pathfinder Mod. #32 Flame Hardened Lathe Bed, Monarch Flame
Hardened Lathe with Manuals, Collets, Jaw Chucks, 3PH, 15 HP, LPO-23, Series 62 Haas
VF-4 Machining Center, 4th & 5th Axis Head with Control Box and Tool Cart Hasvedt
CS-2 Ram EDM, Summit 17 x 72 Engine Lathe, Mod 16-3×40 Sharp 17 x 80 Engine
Lathe, Haas Tool Room Mill, K & T 3 Axis Mobile DTE 24 Vertical Mill Bridgeport Series I
Vertical Mill, Bridgeport Series I 2hp, 3 PH, Toyoda Cylindrical Grinder Giddings & Lewis
Numerilathe, Davis Broach Keyseater, Okamoto Horizontal Surface Grinder, Cincinnati
Bickford Radial Drill Press, Clausing Colchester Turret Engine Lathe, Hardinge Super
Precision Tool Room, Hardinge Super Precision Lathe, Dovetail Bed, Toledo Pipe
Threading Machine, Saws, Air Compressors, Grinders, Pneumatic Tools, Aceylene
Torches, Grinders, Temp Gauges, Inpsection Equiment, Work Benches, Manuals,
Inspection Tools, Marking Tools, Work Benches, Heavy Duty Shelving & Much More.
Terms: Online Only. Full payment auction day. 15% Buyer Premium. Discount for Cash.
Go to website to view full listings and details.
www.TedEverett.com
farming division
industrial division
Boyleston
A U C T I O N S
Gina Boyleston
Auctioneer
850-393-1154
AU4475 AB3264
9
International/Online
SUBASTA PÚBLICA DE 2 DÍAS
DÍA UNO
MAGNUM PRECISION INSTRUMENTS
12450 Cutten Road • Houston, Texas 77066 EE UU
Miércoles 16 de septiembre · 9 am
2 Centros de maquinado vertical Deckel Maho
Deckel Maho DMF500 Linear, CNC 5 ejes,
columna viajera, año 2012
Máquina para medición por
coordenadas, Zeiss Accura-Mass
12/20/10, año 2012
Asista o puje por Internet vía BidSpotter.com
10 Centros de maquinado vertical Deckel Maho, CNC 5 ejes, columna viajera, incluidos 2 DMF 500
Linear, año 2012 · 3 Mandrinadoras horizontales CNC, Kuraki, 2 KBT11WA, año 2012 · 5 Centros de
maquinado horizontal Dah Lih HC2000, CNC 4 ejes, la mayoría año 2012 · 3 Tornos CNC, Doosan
Puma 800L, año 2012 · Centro de torneado y fresado Gildemeister GMX250 Linear · Muchos otros
tornos CNC: Doosan, Weiler, Daewoo, Mori Seiki, Hwacheon · 7 Fresadoras verticals CNC 3 ejes:
Lagun y Trak · 11 Centros de maquinado vertical CNC con 4º eje, Dah Lih · 14 Tornos paralelos y
3 fresadoras verticals de torreta ¡4 Nuevos, nunca se usaron! · Inmensa cantidad de accesorios de
precisión para máquinas y herramientas de corte · Almacénes de herramientas, automatizados ·
Fantástico departamento para control de calidad, incuye: máquina Zeiss Accura-MASS para medición
por coordenadas, 120” x 48” x 39”, año 2012 · 2 Brazos Faro para medición 3D por láser · Calibradores
MicroHite · Cientos de instrumentos para medición · Montacargas · Lavadoras para pisos · 3 Sistemas
con grúas portal de puente viajero · Más de 25 grúas de brazo radial, con columnas · Compresores de
aire y secadores · Taller para corte con sierras · Materias primas · Camiones · Oficinas · ¡Más!
Primas a pagar por el comprador: 15% en sitio y 18% por Internet
Inspección el martes 15 de septiembre, de 9 am a 4 pm
3 Tornos CNC, Doosan Puma 800L, año 2012
5 Centro de maquinado horizontal
Dah Lih HC2000, CNC 4 ejes
Folleto gratuito llamando a EE UU al 1-713-691-4401
Para otras subastas visite www.pmi-auction.com
farming division
P.O. Box 19100 • Houston, TX 77224 • Fax (713) 672-7905 • E-mail: [email protected]
10
11.7 x 18.2 centimeters
industrial division
HUGE
2-DAY PUBLIC AUCTION
DAY TWO
By Order of the U.S. Bankruptcy Court, Southern District of Texas, Houston Division,
Allison D. Byman Trustee, Case Nos.: 15-33151-H2-7, 15-33152-H4-7, 15-33153-H1-7, and 15-33154-H1-7
SHAMROCK PRECISION OPERATIONS
1730 Elmview Drive • Houston, Texas 77080 EE UU
THURSDAY, SEPTEMBER 17 · 9 AM
2011 DOOSAN HP6300 CNC 4-AXIS
CNC HORIZONTAL MACHINING CENTER
(1 OF 2) 2012 OKUMA SPACETURN LB3000EX-MY
4-AXIS MILL/TURN MACHINES
Bid onsite or bid online at
The Most Incredible Machine Tool Auction PMI has ever conducted. Featuring; (8) Sodick CNC EDMs incl. Large
Capacity Model AQ750LH CNC wire EDM new in 2012; Deckel Maho Model DMF260 6-Axis Traveling Column CNC Vert.
Machining Center, new 2012; Doosan Mynx Models 7500/50, 6500/50, 6030/50 and 5025/50 CNC Vertical Machining
Centers all with 4th axis, new as 2012; Doosan HP 6300 4-Axis Horiz. Machining center new 2011; Haas EC1600 Horiz.
Machining Center w/built-in 4th axis table new 2013; (2) Haas VF5/50 w/4th axis, new 2012; Haas VF2; Doosan Daewoo
DHC-400, Okuma MX40HA and Doosan HC400 Horiz. Maching Centers, as new as 2011; (15) CNC Lathes from Doosan
& Okuma incl. (2) Okuma Spaceturn LB3000EX-MY new 2012; (2) Doosan Puma 400L, new 2012; Quality Control Dept.
w/multiple Zeiss CMMs, MicroHite Gauges and Hundreds of Measuring Instruments; Forklifts; Trucks; Huge Quantity
Miscellaneous; Offices and More!!!
BUYER’S PREMIUM: 15% Onsite * 18% Online
INSPECTION: Tuesday & Wednesday, September 15 & 16, 9 AM to 4 PM and morning of sale.
AUCTIONEER: Ron Moore TX Lic. #7314
2012 DOOSAN MYNX 7500/60 4-AXIS CNC
VERTICAL MACHINING CENTER
2013 HAAS EC1600 5-AXIS CNC
HORIZONTAL MACHINING CENTER
For a brochure call 713‑691‑4401 or go to www.pmi‑auction.com
farming division
P.O. Box 19100 • Houston, TX 77224 • Fax (713) 672-7905 • [email protected]
industrial division
Shamrock Precision Operations-IMT 7 x 9.1825
11
2 UPCOMING AUCTIONS
iaasworldwide.com
PRESENTS
ANOTHER
ONSITE/ONLINE AUCTION
Auction Date: September 10th • 10:30 am EST
Inspection: September 9th • 8 am to 4 pm EST
Location: Lancaster Pennsylvania Laundry
AUCTION
#1
Formerly: Lancaster Pennsylvania Laundry
Lavatec Loading Conveyor: Model LP561.143 2001, Lavatec BTW 75-lb x 16 with 30’ Heat Exchanger, Lavatec Press
LP-561 S/N 561.0143 2001, Lavatec Discharge Conveyor, (3) Lavatec Dryers 292 lb each. ALL 2001, Gas, 2-way tilt
Models FL646GU, S/N6460217; FL646GU, S/N646021; & FL646GU, S/N6460218 complete with overhead sling load
and un-load rail system with ½ ton electric hoist, Milnor Loading Conveyor: Model CONWA 306; S/N AAM/6050860;
1992; 240/3/60, Milnor BTW 110-lb x 5: Model: WAT/AAC; S/N 6050840; 1992; 240/3/60 (5) Pockets: 76032C2F
S/N 6050801; 76032C2M S/N6050802; 76032C2M S/N605083; 76032C2M S/N 6050804; 76032C2L S/N6050830,
Lavatec Model LP-571 S/N571.0257 Press 10/90 110lb, Milnor Discharge Conveyor, Milnor Shuttle System to load
either dryers: Model COLOOSOS S/N6050883 1992 440lb,(2) Milnor BTW elevated Dryers 220 lb each. Models
58058TG2 S/N’s 6050885 & 6050886 , Milnor Dry Lint Collector System Model DRYVACO1 S/N 6050887 1992,
Milnor water filter/screen system Model FLOWSPLI S/N 6050841 1992, Braun 400 TSL W/E S/N: NTS40078519
240/3/60, Braun/Norman Steam Dryer 220lb Model 81-H-SH S/N H-81391132 3-22-9 208/3/60, Colmac Steam
Garment Tunnel CFS-300 Product CFDOSSR S/N 072591C, American HyPro 6 Roll Flatwork Ironer S/N 141-M3-584
SIZE 126”, American HyPro 6 Roll Flatwork Ironer S/N 141-M3-281 6 ROLL, Braun Omega Folder, S/N OM81230309,
Braun Small Piece Folder S/NSPFRDM4982155 LANES 1 CROSSFOLDS 2 240/3/60, Flat Belt Conveyor 29-1/2” x 31
foot long 120 volt, Natmar Sling System, Davis Packaging wrapping Machine Model TD-362A, American Dyna-Pak 627
Z-33 M 33345 Model 54-1/2 Hot Head Utility Press,American 631-Z27 M 3095 Model OM-020 Hot Head Mushroom
Press, Rosperity 3- pad Collar and Cuff Press S/N 7027U-4 Forenta Shirt Sleever Model 76 SLS and Forenta Shirt Sleever
Model 76 SLS, CB 150HP Gas/Oil Boiler Model CB-268-150 Serial L43907 1/5/1968, 200 Gallon Condensate Tank and
Pump 2007, Twin Tank Water Softener 2007,Cleaver Brooks Boiler CB428-200 S/N L43947 1/15/68 Installed 2007,
Condensate Tank and Pump 2007, Floor Scale, ruck, International 2002 VIN# 1HTMMAAM62H412427 Model 4300
DT466 very nice., Miscellaneous Support equipment., IPSO Model IPH 125lb HF 21121NRNN5B Washer extractor
208/240 volt 3 ph, S/N 007806 4/27/2005, IPSO Model IPH 100 100HP 41121NRNU3A 100lb Washer extractor 460
volt 3 ph. S/N 005703 11/20/2003, IPSO Model IPH 100 HP 41121NRUSA 100lb Washer Extractor 460 volt 3 ph.
S/N 004728 04/10/2003, IPSO Model IPH60HP21121NRNUSA 60lb Washer extractor 240 volt 3 ph. S/N 005655
11/12/2003, IPSO Model IT075NDOF3G1W01 120 lb Natural Gas Dryer Micro with Reversing 208/240 volt. Model
KO125C S/N ZGG 2024683, IPSO Model IT075NPOF3G1W01 75 lb Natural Gas Dryer S/N 0607000006, 41 Hamper Carts.
Auction Date: September 21st • 8 am EST - September 25th • 12 pm EST AUCTION
#2
Inspection: ByNot Appointment
Acutal Photo
Location: 900 Loveridge Road • Pittsburg, CA 94565
Acres of MRO available for sale!!
USS-POSCO Industries
Surplus to the ongoing needs of: Thousands of pounds of Bearing, cards, Motors, gears, electric, couplings, bearings,
mufflers, drives, fan wheels, cylinders, gearboxes, chains, reels and more… Call for more information...
16.5% Buyers Premium On-line; 15% on-site
Call for information and more details: 877-235-8299
iaasworldwide.com
Alan D. Loeser Sr.
PA License # AUOO3740
12
14 South Main Street
Shrewsbury, PA 17361-1316
717-235-8299 • www.iaasworldwide.com
farming division
industrial division
ONLINE ONLY AUCTION
AUGUST CONSIGNMENT AUCTION!
FEATURING: (2004) PLURITEC V3-145 MULTI-STATION 2 CIRCUIT
BOARD DRILLING MACHINE
Thursday, August 20th • 2:00 P.M. (EDT)
Inspection Date: By Appointment only
PLURITEC V3-145 MULTI-STATION 2 CIRCUIT BOARD DRILLING MACHINE, TRAVELS:
X-27.834", Y-30.197", Z- 0.95" DRILLING AREA: 24.19" x 30.51" NUMBER OF
INDEPENDENT STATIONS: 1-32", ACCURACY OF POSITIONING 0.196 MILS, REPEATABILITY
OF POSITIONING 0.157 MILS, OPTICAL SCALE RESOLUTIONS: 0.393 MILS, X/Y/Z AXIS
POSITIONING SPEED: 984.25 IN/MIN, X-Y AXIS ACCELERATION: 196.85 IN/MIN, Z-AXIS
ACCELERATION: 787.4 IN/MIN, DRILLING SPINDLE MAX SPEED: 125 RPM, MAXIMUM
www.bidspotter.com/forms/event.php?event=16035
DYNAMIC RUN-OUT: 0.393 MILS, DRILLING/ROUTING SPINDLE MAX SPEED 80 RPM
*NOTE SPECS FROM MANUFACTURER, WEIGHT: 7495.64 LBS, DIMENSIONS: 120.07" x
118.11" x 82.67" USED FOR DRILLING AND ROUTING CIRCUIT BOARDS, S/N: 14500404,
2004
http://www.bidspotter.com/en-us/auction-catalogues/koster-industries/catalogue-id-bscko10136
Register To Bid Online At:
Buyer’s Premium Applies
For more information visit our website
For complete listings
check our website
40 Daniel Street • Farmingdale, N.Y. 11735
farming division
Tel: 631-454-1766 • Fax: 631-454-1779
email: [email protected]
industrial division
13
Upon Instructions from the Receiver | Selon les instructions du séquestre
COMPLETE ASSETS OF A MAJOR EQUIPMENT RENTAL COMPANY
2-DAY AUCTION
WEBCAST
& ONSITE
ENCAN PUBLIC de 2 jours (via Internet et SUR-PLACE)
Day 1:
Wed., Aug. 19 @ 10am
Location: 10721 Ray-Lawson Blvd. • Anjou, Quebec
Preview: Monday & Tuesday, August 17 & 18 from 9am-4pm
Day 2:
Thurs., Aug. 20 @ 10am
Location: 581 Cure-Labelle Blvd. • Blainville, Quebec
Preview: Monday & Tuesday, August 17 & 18 from 9am-4pm
Jour 1:
mercredi 19 août à 10 heures
Lieu:
10721 boul. Ray-Lawson • Anjou, QC
Inspection: Lundi le 17 et mardi le 18 août de 9:00 à 16:00
Jour 2:
le jeudi 20 août à 10 heures
Lieu:
581 boul. Cure-Labelle • Blainsville, QC
Inspection: Lundi le 17 et mardi le 18 août de 9:00 à 16:00
65 AVAILABLE
Bid via Webcast!
REGISTER AT
LATE MODEL
CONSTRUCTION EQUIPMENT
8
FEATURING:
AVAILABLE
(65) SCISSOR LIFTS AS NEW AS 2013
(8) ARTICULATED BOOM LIFTS
(5) TELEHANDLERS AS NEW AS 2007
(5) SKIDSTEERS (2010-2012)
(5) EXCAVATORS AS NEW AS 2012
LIGHT TOWERS, FORKLIFTS, TRAILERS
HUGE QTY. OF SUPPORT EQUIPMENT
SALE CONDUCTED BY
AUCTIONS | LIQUIDATIONS | APPRAISALS
IN CONJUNCTION WITH
75 International Blvd.,
Suite 102
Toronto ON M9W 6L9
Tel: (416) 242-3560
maynards.com
Encanteurs
Industriels
Canadiens Inc.
Canadian
Industrial
farming
division
Auctioneers
Inc.
biditup.com
assetservices.ca ciacpcc.com
14
industrial division
Upon Instructions from the Owners
WELL-MAINTAINED FABRICATION & MACHINE TOOL EQUIPMENT
PUBLIC AUCTION
WEBCAST
& ONSITE
THURS, AUG. 20TH 2015 @ 9AM
PDT
PREVIEW & INSPECTION: Wedesday, August 19 from 9am-5pm or by appointment
2066 Henry Ave. • Sidney BC (Vancouver Island)
STANKO Horizontal Boring Mill
STANKO Horizontal Boring Mill
2014
ROUNDO PS-500 Bending Rolls, 2”x96” wide material cap.
MODERN 560X2000 Gap Bed Lathe
Featuring: BORING MILLS: (2) STANKO Horiz. Boring Mills • GRAY Vert. Boring Mill | BENDING ROLLS & PRESSES: ROUNDO PS500 Bending Rolls
• TORDAMS & HILLS & JONES CO. Pyramid Rolls • 400 & 100 Ton Hyd. Presses • Portable Hyd. Punches, 55 & 50 Ton | SHEAR, IRONWORKER &
PLANER: MH KANHHHNA (STANKO) Shear • PEDDINGHAUS Ironworker • ELLIOT Hyd. Planer System | STURDIMILL, SAWS & BORING SYSTEM:
ELLIOT Sturdimill • HYD-MECH, MARVEL & WELLS Bandsaws • ANODE Cold Cut Saw • 2012 CLIMAX Boring System | RADIAL ARM DRILLS:
LINMAC, MASTEEL & INVERMA | BEVELLER | LATHES: MODERN, MAZAK, MAXIMAT, KINGSTON, BERTRAM & DOMINION Lathes • ENMAX Key
Seater • SUPER LATHE Drive & Head Stock | WELDING MANIPULATORS & POSITIONERS | LARGE QTY. OF WELDING EQUIPMENT: RED-DARC, LINCOLN, HYPERTHERM, LINCOLN, MILLER, ESAB, ETC. | COMPRESSOR & DRYER | MOBILE EQUIPMENT: TOYOTA & CLARK Forklifts •
SNORKLELIFT Manlift • JOY Compressor • DODGE Welding Truck • FORD Flat Deck • FORD Pickup | TRAILERS & RAMPS | GENERAL EQUIPMENT
For More Information Please Contact Mike Seibold 604-675-2227 or [email protected]
farming division
AUCTIONS | LIQUIDATIONS | APPRAISALS
1837 Main St.,
Vancouver BC V5T 3B8
Tel: 604 876-6787 | Fax: 604 876-2678
www.maynards.com
Unable to attend? BID LIVE, ON-LINE!
Register at www.bidspotter.com
industrial division
15
PARTIAL LISTING ONLY! FULL BROCHURE COMING SOON!
PUBLIC AUCTION
Surplus to the Ongoing Operations of
MUELLER CANADA LTD.
NEW MANGANESE LINER
SYSTEM NEW IN 2014
4 AVAILABLE
COMPLETE GREEN SAND IRON FOUNDRY
800+ LOT SALE!
DATE
TIME
Tuesday, August 25, 2015
10:30 A.M. EDT
LOCATION
230 Rue Castonguay Ouest,
St. Jerome, Quebec, J7Z 5V2
LIVE WEBCAST powered by
This auction is
ONSITE
ONLINE
farming division
www.corpassets.com • 416.962.9600 • [email protected]
16
industrial division
Toolroom & Fabricating Equipment/Real Estate for Sale
Plant Closed/Ordered Sold by Owner
MACHINE & FABRICATING SHOP
15009 Highway 79, Bells, TN 38006
Date: Tuesday, August 25th at 10:00 AM
Inspection: Day Prior from 10:00 AM to 4:00 PM
Featuring: SWI Trak DPM-3 CNC Milling Machine
(2007), (8) Vertical Milling Machines, (5) Toolroom
Engine Lathes to 30” x 120”, (10) Mig & Tig Welders,
Grinders, Saws, Drills, Misc. Toolroom Machinery,
Tooling, Accessories, Inspection Equip., Bar Stock &
Structural Steel, Hand Tools, Pipe Threaders, Pickup
Truck, Drag Trailers, Lift Trucks, Air Compressors,
Shop & Support Equip., Office Furniture.
Live on the
15%Internet
On-Site & 18%via www.bidspotter.com
Online Buyers
Premium
15% On-Site
& 18%
On-Line Buyers
Premium
*******************
Real Estate: 21,500 sq. ft. Industrial Bldg. on 9.7
Acres w/3,750 sq. ft. Addition & 1,200 sq. ft. Duplex.
Sold Live On Site Only/$10,000 Deposit Required to Bid
10% Buyers Premium on Real Estate
Hanson Realty & Auction Company, Inc.
Wendell Hanson/Broker/Auctioneer/931-455-1900
farming division
industrial division
17
DUE TO OWNER RETIRING
SECROFT METAL PRODUCTS
HVAC Sheet Metal Fabrication
350 Woodbridge Ave, Unit 17, Woodbridge, Ontario
2009
2009 FLAGLER Duct Flange Machine, Model DF2
EDWARDS 8’ x 1/8” Power Shear
PINNACLE INDUSTRIAL AUTOMATION 5’x12’ Plasma Cutting Table
LOCKFORMER Model 22 Quad Rollformer
Auction: Wednesday September 9, 11:00 am (ET)
Inspection: Morning of Auction 9:00am – 11:00am
A U C T I O N S • L I Q U I D AT I O N S
FINANCING • APPRAISALS
905.669.8893
infinityassets.com
Bid Live Onsite
& Online Via
Like us at: facebook.com/
Infinity-Asset-Solutions-Inc
Follow us at: twitter.com/farming division
InfinityAssets
18
industrial division
Hardware Manufacturer Including: Cold Headers, Thread
Rollers, Wire Machinery, OBI Presses, Mills, Lathes, Grinders,
Drills, Tooling, Toolroom & Support Equipment
HARDWARE MANUFACTURING COMPANY
1 Industrial Tract, Hudson, New York 12534
Sale Date: Wednesday, September 2nd @10 AM
Inspection: Day Prior from 10:00 AM to 4:00 PM
Cold Headers & Thread Rollers: 5/16” National 3-Die 3-Blow
from ¼” to ½”, (10) DSSD Cold Headers by Waterbury &
Manville, (11) Waterbury Farrel No. 30, 20, 10 & 0 Thread
Rollers to ½”, (3) Hartford High Speed Thread Rollers, ½”
Greenwood & Bately #30 Thread Roller, Lg. Qty. Tooling &
Accessories, (2) ¼” F.E. KD-02-20 Inline Wire Drawers, ½”
Waterbury Farrel #2 End Slotting Slotter, ¼” ITW 322 Shank
Type Slotter, 3/32” Nilson S-1 Fourside.
Presses, Toolroom & Support Equipment: (5) Bliss OBI
Presses to 45 Ton Including C45 & C35, (6) Bridgeport Vert.
Mills, Other Dial Type Mills, (5) Toolroom Engine Lathes to 16” x
54”, (8) Surface Grinders, Various Tool & Cylinder Grinders, EDM,
Saws, Drills, Furnaces, Presses, Inspection Equipment, Tooling &
Accessories, Lift Trucks, Air Compressors, Wire Baskets, 150,000
lbs. Various Wire Spool Inventory, Misc. Machinery, Shop &
Support Equipment. Large Scrap Opportunity!
15%the
On-Site
& 18% via www.bidspotter.com
Live on
Internet
Online
Buyers&Premium
15%
On-Site
18% On-Line
Buyers Premium
Jeffrey L. Luggen / Auctioneer
farming division
industrial division
19
Live Onsite & Webcast Auction
Large Capacity Machining Facility
Former Assets of Johnson Metall, Inc.
1305 Oberlin Ave., Lorain (Cleveland), Ohio
AUCTION DATE: Thursday, August 27th, 9:00 AM
INSPECTION: Wednesday, August 26th, 9-4
Featuring:
• Mori Seiki NLX-2500Y/1250 CNC Turning Center, New 2014 • Mori Seiki NL-2500 CNC
Turning Center, New 2005 • (3) Mori Seiki LL-8B and LL-7 CNC Flat Bed Lathes • (7)
Additional Mori Seiki CNC Turning Centers • Johnford ST-130DX CNC Turning Center, New
2007 • Johnford ST-60CH CNC Turning Center, New 2007 • Warner & Swasey 4A Turret
Lathe, M-3550, Long Bed, 9” Cap. • Warner & Swasey 4A Turret Lathe, M-3580, 12” Cap.
• (4 )Warner & Swasey 4A and 3A Turret Lathes • (3) Bullard VTL’s*Wellsaw 40” CNC Band
Saw • (4) Deckel Maho 5-Axis CNC Machining Centers • Complete Centrifugal Foundry
Department • Mitutoyo Crysta Apex C 122010 CMM • Agie Agiecut 250SF CNC Wire
EDM • Tool Room*Fork Lifts*Shop Support Items • Free Standing and Bridge Cranes*Air
Compressors • Huge Quantity Tooling and MRO Items
Please call with any Questions • www.thompsonauctioneers.com
Online Bidding Available Through:
3519 State Route 235 • Fairborn, Ohio 45324
Bryan Harvey: (937) 609-6354 or Steve Thompson: (937) 426-8446
Ohio License 63199566109
20
farming division
industrial division
farming division
industrial division
21
AUCTIONS
Click Here
to Visit the
http://www.industrialmachinetrader.com/calendar/AuctionsCalendar.cfm?calendar_type=AU
Auction Calendar
22

ONLINE ONLY AUCTION - MyEquipAuctions.com

Transcription

Similar documents

HENSLIN AUCTIONEERS `SOLD` on National Auctioneers Day Sat

onebillion dollars

Farm Brochure Front.indd

CNC MACHINING CENTER FOR TRIMMING MOLD CUTTING

liquidation auction

Toy Stories With Six-Figure Endings

426184 Liska Auctions.eps

View SALE BILL