Heretic C SPECS.ai - ECOSSE | Moto works

Heretic C | black wheels
Heretic C | silver wheels
powerplant
chassis
comfort & control
personalization
Engine: 45-degree, American V-Twin.
Black, cast. Dynamically balanced
crank for reduced vibration.
Mainframe: 4130 Chrome-moly
Weight: 460 lbs.
Subframe: 4130 Chrome-moly
Wheel base: 60.5 in.
Production number: Each engraved with sequential
production number
Swingarm: 4130 Chrome-moly
Front/Rear wheel: 17" aluminum
Front suspension: Öhlins for ECOSSE.
Upside down,
fully adjustable.
Wheel travel: 5.2" front; 6.5" rear
Displacement: 100 cu. in. (1639cc)
Horsepower: ~105 at rear wheel
Ft-lbs of torque: ~110 at rear wheel
Compression ratio: 9.6:1
Bore and stroke: 3.875 in. x 4.25 in.
Carburetion: Mikuni 42mm flat slide
Exhaust: Handcrafted by ECOSSE. 2 into 1
into 2. Stainless steel head pipes
with dual titanium mufflers.
Chassis color: Matte black
Wheel finish: Black or silver
Rear suspension: Öhlins for ECOSSE,
fully adjustable.
3 riding modes.
Instrumentation: Analog tach; LCD speedo
Handlebar finish: Black or silver
Ground clearance: 6.5 in. and up
Seat: Low-profile (sleek) or high-profile (plush)
Rake: 24.5 to 27.5 degrees
Load capacity: 400 lbs.
Brakes: ISR dual 4-piston radial calipers,
320mm full floating/dampened disks;
260mm single 2-piston rear
Seat height: 29.5 to 30.5 in.
Fuel tank: Handcrafted carbon fiber/
carbon kevlar/fiberglass
matrix; 4.2 gallons
Grips: Black/grey Spider advanced technology
gel grips
Transmission: 5-speed
Primary: Wet chain drive
Front/Rear tire: 120/70 ZR17;
190 or 200/55ZR17
Bodywork color: Clear-coated carbon fiber with
black highlight
Oil capacity: 4 quarts; circulated through
mainframe
Bodywork: Carbon fiber (headlight, fenders, tank,
tail, tach shroud, air filter cover &
seat pans)
Seat configuration: 1+1 (rider & passenger)
Peg configuration: mid position
options
Billet aluminum engine upgrade, BST carbon-fiber wheels
SPECIFICATIONS AND PRICING SUBJECT TO CHANGE AT ANY TIME.
ECOSSE Moto Works | www.ecossemoto.com | 303.246.3080