Wheeled Excavator A 912 Compact

Wheeled Excavator
A 912 Compact
litronic`
Operating Weight:
12,700 – 13,900 kg
Engine:
90 kW / 122 HP
Stage IV
Bucket Capacity:
0.15 – 0.48 m3
Technical Data
Diesel Engine
Rating per ISO 9249
Model
Type
Bore / Stroke
Displacement
Engine operation
Air cleaner
Engine idling
Electrical system
Voltage
Batteries
Alternator
Stage IV
Harmful emissions values
Emission control
Option
Fuel tank
Urea tank
Hydraulic pump
for attachment
and travel drive
Max. flow
Max. pressure
Hydraulic pump
regulation and control
24 V
2 x 135 Ah / 12 V
three-phase current 28 V / 80 A
MODE selection
in accordance with 97/68/EG stage IV
SCR technology
Deutz particle filter
175 l
20 l
Cooling System
Diesel engine
Hydraulic System
90 kW (122 HP) at 1,800 RPM
Deutz TCD3.6L4
4 cylinder in-line
98 / 120 mm
3.6 l
4-stroke diesel
Common-Rail
turbo-charged and after-cooler
reduced emissions
dry-type air cleaner with pre-cleaner, primary and
safety elements
sensor controlled
Hydraulic tank
Hydraulic system
Hydraulic oil filter
S (Sensitive)
E (Eco)
P (Power)
Engine speed and
performance setting
Option
water-cooled
compact cooling system consisting cooling unit for
water, hydraulic oil and charge air with stepless
­thermostatically controlled fan, fans for radiator
­cleaning, can be completely folded away
Swing ring
Hydraulic Controls
Servo circuit
Attachment and swing
Chassis
Proportional control
2
A 912 Compact Litronic
via control valves with integrated safety valves,
­simultaneous and independent actuation of chassis,
swing drive and attachment
with hydraulic pilot control and proportional joystick
levers
via switch or electroproportional foot pedals
proportionally acting transmitters on the joysticks for
additional hydraulic functions
195 l/min.
350 bar
Liebherr-Synchron-Comfort-system (LSC) with
­electronic engine speed sensing regulation, pressure
and flow compensation, torque controlled swing drive
priority
100 l
max. 230 l
1 main return filter with integrated partial micro
­filtration (5 µm)
adjustment of engine and hydraulic performance via
a mode pre-selector to match application, e.g. for
especially economical and environmentally friendly
operation or for maximum digging performance and
heavy-duty jobs
mode for precision work and lifting through very
­sensitive movements
mode for especially economical and environmentally
friendly operation
mode for high performance with low fuel consumption
stepless alignment of engine output and hydraulic
power via engine speed
Tool Control: ten preadjustable pump flows and
­pressures for add on tools
Swing Drive
Drive
Power distribution
Liebherr axial piston variable displacement pump
Swing speed
Swing torque
Holding brake
Option
Liebherr axial piston motor with torque control and
integrated brake valve
Liebherr, sealed race ball bearing swing ring,
internal teeth
0 – 10.0 RPM stepless
33 kNm
wet multi-disc (spring applied, pressure released)
pedal controlled positioning swing brake
Operator’s Cab
Cab
Operator’s seat Standard
Operator’s seat Comfort
(Option)
Operator’s seat Premium
(Option)
Control system
Operation and displays
Air-conditioning
ROPS safety cab structure (roll-over protection system)
with individual windscreens or featuring a slide-in
­subpart under the ceiling, work headlights integrated
in the ceiling, a door with a sliding window (can be
opened on both sides), large stowing and depositing
possibilities, shock-absorbing suspension, sounddamping insulating, tinted laminated safety glass,
­separate window shades for the sunroof window and
windscreen
air cushioned operator’s seat with 3D-adjustable armrests, headrest, lap belt, seat heater, manual weight
adjustment, adjustable seat cushion inclination and
length and mechanical lumbar vertebrae support
in addition to operator’s seat standard: lockable horizontal suspension, automatic weight adjustment,
adjustable suspension stiffness, pneumatic lumbar
vertebrae support and passive seat climatisation with
active coal
in addition to operator’s seat comfort: active electronic
weight adjustment (automatic readjustment), pneumatic low frequency suspension and active seat climatisation with active coal and ventilator
joysticks with arm consoles and swivel seat, folding
left arm console
large high-resolution operating unit, selfexplanatory,
colour display with touchscreen, video-compatible,
numerous setting, control and monitoring options,
e.g. air conditioning control, fuel consumption,
machine and tool parameters
automatic air-conditioning, recirculated air function,
fast de-icing and demisting at the press of a button,
air vents can be operated via a menu; recirculated air
and fresh air filters can be easily replaced and are
accessible from the outside; heating-cooling unit,
designed for extreme outside temperatures, sensors
for solar radiation, inside and outside temperatures
(country-dependent)
Undercarriage
Drive
Pulling force
Travel speed
Driving operation
Axles
Option
Service brake
Holding brake
Stabilization
oversized two speed power shift transmission with
additional creeper speed, Liebherr axial piston motor
with functional brake valve on both sides
84 kN
0 –   3.5 km/h stepless (creeper speed off-road)
0 –   7.0 km/h stepless (off-road)
0 – 13.0 km/h stepless (creeper speed on-road)
0 – 20.0 km/h stepless (road travel)
0 – max. 25.0 or 30.0 km/h Speeder (Option)
automotive driving using accelerator pedal, cruise
control function: storage of variable accelerator pedal
positions, both off-road and on-road
manual or automatic hydraulically controlled front axle
oscillation lock
four wheel steering
two circuit travel brake system with accumulator;
wet and backlash-free disc brake
wet multi-disc (spring applied, pressure released)
stabilizing blade (adjustable during travel for dozing)
2 point outriggers
stabilizing blade + 2 point outriggers
divided blade rear
divided blade rear and stabilizing blade front
Attachment
Type
Hydraulic cylinders
Bearings
high-strength steel plates at highlystressed points
for the toughest requirements. Complex and stable
mountings of attachment and cylinders
Liebherr cylinders with special seal system as well as
shock absorption
sealed, low maintenance
Complete Machine
Lubrication
Option
Liebherr central lubrication system for uppercarriage
and attachment, automatically
A 912 Compact Litronic3
Dimensions
D
E
A
C
W
H
K
I2
Q
J2
H1012
M1
M
L
T2
B
B2
U2
V
X
J3
I5
I3
T3
J3
A 912 Compact Litronic
T1
H1040
B
B5
I1
L
U3
J5
T5
I3
T3
4
L
U6
J1
H1039
B
B1
mm
2,525
2,550
2,550
2,550
2,550
3,130
1,675
1,675
2,545
465
415
415
465
650
625
625
650
1,195
2,540
1,100
1,440
340
1,180
1,100
1,120
1,170
4,370
4,840
4,830
R3
Blade
+ 2 pt. outr.
mm
6,350
6,050
2,550
2,550
8,550
8,550
Stabilizer blade
+ divided blade
mm
6,350
6,050
2,550
2,550
8,550
8,550
655
1140
000
Stick Two-piece boom 4.20 m
Stabilizer
Divided
blade
blade
m
mm
mm
V 1.85 6,300
6,350
2.05 6,000
6,050
W 1.85 2,550
2,550
2.05 2,550
2,550
X 1.85 8,500
8,550
2.05 8,500
8,550
Dimensions are with attachment over steering axle
R1
520
A
B
B1
B2
B5
C
D
E
H
I1
I2
I3
I5
J1
J2
J3
J5
K
L
M
M1
Q
T1
T2
T3
T5
U2
U3
U6
E = Tail radius
Tyres 9.00-20
H1036
Min. turning radius on tyres 9.00-20
Four wheel steering 4.29 m
Front wheel steering 6.55 m
A 912 Compact Litronic5
Backhoe Bucket
with Two-Piece Boom 4.20 m
ft
25
m
9
H1038
8
7
20
6
5
15
Digging Envelope
with quick coupler
Stick length
Max. digging depth
Max. reach at ground level
Max. dumping height
Max. teeth height
Min. attachment radius
1 with stick 1.85 m at max. attachment offset
2 with stick 2.05 m at max. attachment offset
m
m
m
m
m
m
3
1.85
4.15
8.35
6.40
8.80
3.45
4
2.05
4.35
8.55
6.55
9.00
3.45
4
10
Digging Forces
3
2
without quick coupler
Max. digging force (ISO 6015)
1
Max. breakout force (ISO 6015)
5
0
0
Operating Weight
-1
-5
-2
-10
3
4
kN 56.0 51.8
t 5.7 5.3
kN 70.8 70.8
t 7.2 7.2
1
2
3
-3
The operating weight includes the basic machine with 8 tyres plus intermediate rings,
­t wo-piece boom 4.20 m, stick 2.05 m, quick coupler SW33 and bucket 750 mm / 0.33 m3.
Undercarriage versions
A 912 Compact litronic` with stabilizer blade
A 912 Compact litronic` with divided blade
A 912 Compact litronic` with stabilizer blade + 2 pt. outriggers
A 912 Compact litronic` with stabilizer blade + divided blade
4
-4
-15
-5
9
8
7
25
6
20
5
4
15
3
10
2
1
5
Weight (kg)
12,700
13,100
13,500
13,800
0m
0 ft
Stabilizers
raised
Stabilizer blade
down
Weight
Capacity
ISO 74511)
Cutting width
Buckets Machine stability per ISO 10567* (75 % of tipping capacity)
Divided blade
down
Stabilizer blade
+ 2 pt. outriggers
down
Stabilizer blade
+ divided blade
down
Stick length (m)
Stick length (m)
Stick length (m)
Stick length (m)
Stick length (m)
mm
m3
kg
1.85
2.05
1.85
2.05
1.85
2.05
1.85
2.05
1.85
2.05
y
y
y
y
y
y
y
y
y
y
3002) 0.15 160
y
y
y
y
y
y
y
y
y
y
4002) 0.20 190
y
y
y
y
y
y
y
y
y
y
4502) 0.20 170
y
y
y
y
y
y
y
y
y
y
5502) 0.22 190
y
y
y
y
y
y
y
y
y
y
6502) 0.27 210
y
y
y
y
y
y
y
y
y
y
7502) 0.33 230
y
y
y
y
y
y
y
y
y
y
8502) 0.38 240
y
y
y
y
y
y
y
y
y
y
9502) 0.44 270
y
y
y
y
y
y
y
y
y
y
3003) 0.15 150
y
y
y
y
y
y
y
y
y
y
4003) 0.21 180
y
y
y
y
y
y
y
y
y
y
4503) 0.21 160
y
y
y
y
y
y
y
y
y
y
5503) 0.24 190
y
y
y
y
y
y
y
y
y
y
6503) 0.30 210
y
y
y
y
y
y
y
y
y
y
7503) 0.35 220
y
y
y
y
y
y
y
y
y
y
8503) 0.42 240
V
V
y
y
y
y
y
y
y
y
9503) 0.48 270
*Indicated loads are based on ISO 10567 and do not exceed 75 % of tipping or 87 % of hydraulic capacity, max. stick length without quick coupler, lifted 360° on firm with blocked
oscillating axle
1)comparable with SAE (heaped)
2)Bucket with teeth (also available in HD version)
3) Bucket with cutting edge (also available in HD version)
Buckets up to 400 mm cutting width with limited digging depth
Max. material weight y = ≤ 1.8 t/m3, y = ≤ 1.5 t/m3, V = ≤ 1.2 t/m3, – = not authorised
6
A 912 Compact Litronic
Lift Capacities
with Two-Piece Boom 4.20 m
Stick 1.85 m
2.0 m
m
3.0 m
4.0 m
5.0 m
6.0 m
7.0 m
Undercarriage
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0
– 1.0
– 2.0
– 3.0
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Height
m
3.0*
3.0*
3.0*
3.0*
3.0*
4.6*
4.6*
4.6*
4.6*
4.6*
6.4*
6.4*
6.4*
6.4*
6.4*
6.9
8.1*
8.1*
8.1*
8.1*
7.1
8.6
8.8
8.9*
8.9*
Can be slewed through 360°
3.0*
3.0*
3.0*
3.0*
3.0*
4.6*
4.6*
4.6*
4.6*
4.6*
6.4*
6.4*
6.4*
6.4*
6.4*
8.1*
8.1*
8.1*
8.1*
8.1*
8.9*
8.9*
8.9*
8.9*
8.9*
4.0
4.6
4.8
5.9
6.1
3.9
4.5
4.7
5.8
6.0
3.6
4.2
4.3
5.6
5.7
3.4
4.0
4.1
5.3
5.5
3.3
3.9
4.0
5.2
5.4
3.3
3.9
4.1
5.3
5.5
3.4
4.0
4.1
5.3
5.5
6.4*
6.4*
6.4*
6.4*
6.4*
6.7*
6.7*
6.7*
6.7*
6.7*
7.6
7.8*
7.8*
7.8*
7.8*
7.3
8.3*
8.3*
8.3*
8.3*
7.2
10.2*
10.2*
10.2*
10.2*
7.3
10.3*
10.3*
10.3*
10.3*
7.3
8.0*
8.0*
8.0*
8.0*
2.7
3.1
3.1*
3.1*
3.1*
2.6
3.0
3.1
3.7
3.8
2.6
2.9
3.0
3.7
3.7
2.4
2.8
2.9
3.6
3.7
2.2
2.6
2.7
3.4
3.5
2.2
2.5
2.6
3.3
3.4
2.1
2.5
2.6
3.3
3.4
2.1
2.5
2.6
3.3
3.4
3.1*
3.1*
3.1*
3.1*
3.1*
4.6
4.9*
4.9*
4.9*
4.9*
4.5
5.8*
5.8*
5.8*
5.8*
4.5
6.0*
6.0*
6.0*
6.0*
4.4
6.1*
6.1*
6.1*
6.1*
4.3
6.2*
6.2*
6.2*
6.2*
4.3
6.3*
6.3*
6.3*
6.3*
4.3
4.7*
4.7*
4.7*
4.7*
2.0
2.2
2.3
2.7*
2.7*
2.0
2.2
2.3
2.8*
2.8*
1.9
2.2
2.3
2.7
2.8
1.9
2.2
2.2
2.7
2.7
1.9
2.1
2.2
2.6
2.7
1.7
2.0
2.1
2.6
2.6
1.6
1.9
2.0
2.5
2.5
1.6
1.8
1.9
2.4
2.5
1.5
1.8
1.8
2.3
2.4
In longitudinal position of undercarriage
2.7*
2.7*
2.7*
2.7*
2.7*
2.8*
2.8*
2.8*
2.8*
2.8*
3.2*
3.2*
3.2*
3.2*
3.2*
3.3
3.7*
3.7*
3.7*
3.7*
3.2
4.1*
4.1*
4.1*
4.1*
3.2
4.3*
4.3*
4.3*
4.3*
3.1
4.3*
4.3*
4.3*
4.3*
3.1
4.4*
4.4*
4.4*
4.4*
3.0
4.3*
4.3*
4.3*
4.3*
1.4
1.6
1.6
2.0
2.1
1.4
1.6
1.7
2.1
2.1
1.4
1.6
1.7
2.1
2.1
1.4
1.6
1.7
2.1
2.1
1.4
1.6
1.6
2.0
2.1
1.3
1.5
1.6
1.9
2.0
1.2
1.4
1.5
1.8
1.9
1.1
1.3
1.4
1.8
1.8
1.1
1.3
1.4
1.8
1.8
2.1*
2.1*
2.1*
2.1*
2.1*
2.5
2.7*
2.7*
2.7*
2.7*
2.5
2.8*
2.8*
2.8*
2.8*
2.5
3.0*
3.0*
3.0*
3.0*
2.5
3.2*
3.2*
3.2*
3.2*
2.4
3.3*
3.3*
3.3*
3.3*
2.3
3.4*
3.4*
3.4*
3.4*
2.3
3.4*
3.4*
3.4*
3.4*
2.2
2.8*
2.8*
2.8*
2.8*
Max. reach
1.0
1.2
1.2
1.5
1.6
1.0
1.2
1.2
1.5
1.6
1.0
1.1
1.2
1.5
1.5
0.9
1.1
1.1
1.4
1.5
0.9
1.1
1.1
1.4
1.5
0.9
1.0
1.1
1.4
1.4
1.9
2.4*
2.4*
2.4*
2.4*
1.9
2.6*
2.6*
2.6*
2.6*
1.9
2.7*
2.7*
2.7*
2.7*
1.8
2.7*
2.7*
2.7*
2.7*
1.8
2.7*
2.7*
2.7*
2.7*
1.8
2.2*
2.2*
2.2*
2.2*
1.9
2.2
2.2
2.2*
2.2*
1.3
1.5
1.6
1.9*
1.9*
1.1
1.2
1.3
1.6
1.6
0.9
1.1
1.1
1.4
1.4
0.8
1.0
1.0
1.3
1.3
0.8
0.9
1.0
1.2
1.3
0.8
0.9
1.0
1.2
1.3
0.8
1.0
1.0
1.3
1.3
0.9
1.0
1.1
1.4
1.4
1.0
1.2
1.3
1.6
1.7
1.5
1.8
1.9
2.4
2.5
2.2*
2.2*
2.2*
2.2*
2.2*
1.9*
1.9*
1.9*
1.9*
1.9*
1.8*
1.8*
1.8*
1.8*
1.8*
1.8
1.8*
1.8*
1.8*
1.8*
1.6
1.8*
1.8*
1.8*
1.8*
1.6
1.9*
1.9*
1.9*
1.9*
1.6
2.0*
2.0*
2.0*
2.0*
1.6
2.2*
2.2*
2.2*
2.2*
1.8
2.2*
2.2*
2.2*
2.2*
2.0*
2.0*
2.0*
2.0*
2.0*
2.7*
2.7*
2.7*
2.7*
2.7*
5.0
6.1
6.8
7.3
7.6
7.7
7.6
7.4
7.0
6.4
4.9
* Limited by hydr. capacity
The lift capacities on the load lift hook of the Liebherr quick coupler SW33 without working tool are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked
oscillating axle. These capacities can be slewed through 360° with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+ / – 15°)
are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. The values apply when the adjusting cylinder is in the optimal position.
Indicated loads based on the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity, or are limited by the permissible load of the load lift hook on the quick
coupler (max. 5 t). Without the quick coupler, lift capacities will increase by up to 110 kg.
In accordance with the harmonised European Standard EN 474-5, hydraulic excavators used for lifting operations must be equipped with pipe fracture safety valves, an overload w
­ arning
device, a load lift hook and a lift capacity chart.
A 912 Compact Litronic7
Lift Capacities
with Two-Piece Boom 4.20 m
Stick 2.05 m
2.0 m
m
3.0 m
4.0 m
5.0 m
6.0 m
7.0 m
Undercarriage
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0
– 1.0
– 2.0
– 3.0
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Stabilizers raised
Stabilizer blade down
Divided blade down
Stabilizer blade + 2 pt. outr. down
Stabilizer blade + divided blade down
Height
m
3.5*
3.5*
3.5*
3.5*
3.5*
3.0*
3.0*
3.0*
3.0*
3.0*
4.4*
4.4*
4.4*
4.4*
4.4*
5.9*
5.9*
5.9*
5.9*
5.9*
6.8
7.5*
7.5*
7.5*
7.5*
7.0
8.4*
8.4*
8.4*
8.4*
Can be slewed through 360°
3.5*
3.5*
3.5*
3.5*
3.5*
3.0*
3.0*
3.0*
3.0*
3.0*
4.4*
4.4*
4.4*
4.4*
4.4*
5.9*
5.9*
5.9*
5.9*
5.9*
7.5*
7.5*
7.5*
7.5*
7.5*
8.4*
8.4*
8.4*
8.4*
8.4*
4.0
4.6
4.8
5.9
6.0*
3.9
4.5
4.6
5.8
5.9
3.6
4.2
4.4
5.6
5.8
3.4
4.0
4.1
5.3
5.5
3.3
3.9
4.0
5.2
5.4
3.3
3.9
4.0
5.2
5.4
3.3
3.9
4.1
5.3
5.5
6.0*
6.0*
6.0*
6.0*
6.0*
6.6*
6.6*
6.6*
6.6*
6.6*
7.5*
7.5*
7.5*
7.5*
7.5*
7.3
8.2*
8.2*
8.2*
8.2*
7.2
9.7*
9.7*
9.7*
9.7*
7.2
10.3*
10.3*
10.3*
10.3*
7.3
8.8*
8.8*
8.8*
8.8*
2.6*
2.6*
2.6*
2.6*
2.6*
2.6
3.0
3.1
3.7
3.8
2.5
2.9
3.0
3.6
3.7
2.4
2.8
2.9
3.6
3.7
2.2
2.6
2.7
3.4
3.5
2.1
2.5
2.6
3.3
3.4
2.1
2.5
2.6
3.3
3.4
2.1
2.5
2.6
3.3
3.4
2.6*
2.6*
2.6*
2.6*
2.6*
4.6
4.7*
4.7*
4.7*
4.7*
4.5
5.7*
5.7*
5.7*
5.7*
4.5
5.9*
5.9*
5.9*
5.9*
4.4
6.1*
6.1*
6.1*
6.1*
4.3
6.2*
6.2*
6.2*
6.2*
4.3
6.3*
6.3*
6.3*
6.3*
4.3
5.2*
5.2*
5.2*
5.2*
1.9
2.2
2.3
2.4*
2.4*
2.0
2.3
2.3
2.4*
2.4*
2.0
2.2
2.3
2.5*
2.5*
1.9
2.2
2.3
2.7
2.8
1.9
2.1
2.2
2.7
2.7
1.9
2.1
2.2
2.6
2.7
1.7
2.0
2.1
2.6
2.7
1.6
1.9
2.0
2.5
2.5
1.6
1.8
1.9
2.4
2.5
1.5
1.8
1.8
2.3
2.4
1.5
1.7
1.8
2.3
2.4
In longitudinal position of undercarriage
2.4*
2.4*
2.4*
2.4*
2.4*
2.4*
2.4*
2.4*
2.4*
2.4*
2.5*
2.5*
2.5*
2.5*
2.5*
2.8*
2.8*
2.8*
2.8*
2.8*
3.3
3.5*
3.5*
3.5*
3.5*
3.2
4.0*
4.0*
4.0*
4.0*
3.2
4.3*
4.3*
4.3*
4.3*
3.1
4.3*
4.3*
4.3*
4.3*
3.1
4.4*
4.4*
4.4*
4.4*
3.0
4.4*
4.4*
4.4*
4.4*
3.0
3.1*
3.1*
3.1*
3.1*
1.4
1.6
1.7
2.0
2.1
1.5
1.7
1.7
2.1
2.1
1.5
1.7
1.7
2.1
2.1
1.4
1.6
1.7
2.0
2.1
1.4
1.6
1.6
2.0
2.1
1.3
1.5
1.6
1.9
2.0
1.2
1.4
1.5
1.9
1.9
1.1
1.3
1.4
1.8
1.8
1.1
1.3
1.4
1.7
1.8
2.2*
2.2*
2.2*
2.2*
2.2*
2.5*
2.5*
2.5*
2.5*
2.5*
2.5
2.7*
2.7*
2.7*
2.7*
2.5
2.9*
2.9*
2.9*
2.9*
2.5
3.2*
3.2*
3.2*
3.2*
2.4
3.3*
3.3*
3.3*
3.3*
2.4
3.3*
3.3*
3.3*
3.3*
2.3
3.4*
3.4*
3.4*
3.4*
2.2
3.0*
3.0*
3.0*
3.0*
Max. reach
1.0
1.2
1.2
1.5
1.6
1.0
1.2
1.2
1.5
1.6
1.0
1.2
1.2
1.5
1.6
1.0
1.1
1.2
1.5
1.6
0.9
1.1
1.2
1.5
1.5
0.9
1.1
1.1
1.4
1.5
0.9
1.0
1.1
1.4
1.4
1.8*
1.8*
1.8*
1.8*
1.8*
1.9
2.4*
2.4*
2.4*
2.4*
1.9
2.6*
2.6*
2.6*
2.6*
1.9
2.6*
2.6*
2.6*
2.6*
1.8
2.7*
2.7*
2.7*
2.7*
1.8
2.7*
2.7*
2.7*
2.7*
1.8
2.5*
2.5*
2.5*
2.5*
1.7
1.9
2.0*
2.0*
2.0*
1.2
1.4
1.5
1.7*
1.7*
1.0
1.2
1.2
1.5
1.6
0.9
1.0
1.1
1.3
1.4
0.8
0.9
1.0
1.2
1.3
0.7
0.9
0.9
1.2
1.2
0.7
0.9
0.9
1.2
1.2
0.8
0.9
0.9
1.2
1.3
0.8
1.0
1.0
1.3
1.4
1.0
1.1
1.2
1.5
1.6
1.3
1.5
1.6
2.0
2.1
2.0*
2.0*
2.0*
2.0*
2.0*
1.7*
1.7*
1.7*
1.7*
1.7*
1.6*
1.6*
1.6*
1.6*
1.6*
1.6*
1.6*
1.6*
1.6*
1.6*
1.6
1.6*
1.6*
1.6*
1.6*
1.5
1.7*
1.7*
1.7*
1.7*
1.5
1.8*
1.8*
1.8*
1.8*
1.6
2.0*
2.0*
2.0*
2.0*
1.7
2.2*
2.2*
2.2*
2.2*
1.9
2.0*
2.0*
2.0*
2.0*
2.3*
2.3*
2.3*
2.3*
2.3*
5.3
6.4
7.1
7.5
7.8
7.9
7.8
7.6
7.2
6.6
5.4
* Limited by hydr. capacity
The lift capacities on the load lift hook of the Liebherr quick coupler SW33 without working tool are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked
oscillating axle. These capacities can be slewed through 360° with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+ / – 15°)
are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. The values apply when the adjusting cylinder is in the optimal position.
Indicated loads based on the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity, or are limited by the permissible load of the load lift hook on the quick
coupler (max. 5 t). Without the quick coupler, lift capacities will increase by up to 110 kg.
In accordance with the harmonised European Standard EN 474-5, hydraulic excavators used for lifting operations must be equipped with pipe fracture safety valves, an overload w
­ arning
device, a load lift hook and a lift capacity chart.
8
A 912 Compact Litronic
Clamshell Grab
with Two-Piece Boom 4.20 m
ft
25
m
8
H1037
7
20
6
5
15
Digging Envelope
with quick coupler
Stick length
Max. digging depth
Max. reach at ground level
Max. dumping height
1 with stick 1.85 m at max. attachment offset
2 with stick 2.05 m at max. attachment offset
m
m
m
m
3
1.85
5.05
8.40
5.85
4
2.05
5.25
8.55
6.00
4
10
Clamshell Grab Model GM 5B
3
Max. tooth force
Max. torque of hydr. swivel
2
52 kN (5.3 t)
1.40 kNm
5
Operating Weight
1
0
0
The operating weight includes the basic machine with 8 tyres plus intermediate rings,
two-piece boom 4.20 m, stick 2.05 m, quick coupler SW33 and clamshell grab model
GM 5B / 0.20 m3 (600 mm without ejector).
-1
-5
Undercarriage versions
A 912 Compact litronic` with stabilizer blade
A 912 Compact litronic` with divided blade
A 912 Compact litronic` with stabilizer blade + 2 pt. outriggers
A 912 Compact litronic` with stabilizer blade + divided blade
-2
-10
-3
1
2
3
-4
-15
Weight (kg)
13,000
13,400
13,800
14,100
4
-5
-6
9
8
7
25
6
20
5
4
15
3
10
2
1
5
0m
0 ft
Stabilizers
raised
Stabilizer blade
down
Weight
Capacity
Width
of clamshells
Clamshell Grab Model GM 5B Machine stability per ISO 10567* (75 % of tipping capacity)
Divided blade
down
Stabilizer blade
+ 2 pt. outriggers
down
Stabilizer blade
+ divided blade
down
Stick length (m)
Stick length (m)
Stick length (m)
Stick length (m)
Stick length (m)
mm
m3
kg
1.85
2.05
1.85
2.05
1.85
2.05
1.85
2.05
1.85
2.05
y
y
y
y
y
y
y
y
y
y
3001) 0.10 410
y
y
y
y
y
y
y
y
y
y
4001) 0.13 440
y
y
y
y
y
y
y
y
y
y
6001) 0.20 470
y
y
y
y
y
y
y
y
y
y
8001) 0.27 510
y
y
y
y
y
y
y
y
y
y
3002) 0.10 450
y
y
y
y
y
y
y
y
y
y
4002) 0.13 490
*Indicated loads are based on ISO 10567 and do not exceed 75 % of tipping or 87 % of hydraulic capacity, max. stick length without quick coupler, lifted 360° on firm with blocked
oscillating axle
1)without ejector
2)with ejector
Max. material weight y = ≤ 1.8 t/m3, y = ≤ 1.5 t/m3, V = ≤ 1.2 t/m3, – = not authorised
A 912 Compact Litronic9
Attachments
Ditch Cleaning Buckets
Stabilizers
raised
Stabilizer blade
down
Weight
Capacity
ISO 74511)
Cutting width
Ditch Cleaning Buckets Machine stability per ISO 10567* (75 % of tipping capacity)
Divided blade
down
Stabilizer blade
+ 2 pt. outriggers
down
Stabilizer blade
+ divided blade
down
Stick length (m)
Stick length (m)
Stick length (m)
Stick length (m)
Stick length (m)
mm
m3
kg
1.85
2.05
1.85
2.05
1.85
2.05
1.85
2.05
1.85
2.05
Two-piece boom 4.20 m
y
y
y
y
y
y
y
y
y
y
1,2002) 0.29 380
y
y
y
y
y
y
y
y
y
y
1,3004) 0.28 300
y
y
y
y
y
y
y
y
y
y
1,5004) 0.33 330
y
y
y
y
y
y
y
y
y
y
1,5003) 0.33 210
y
y
y
y
y
y
y
y
y
y
1,5002) 0.36 420
y
y
y
y
y
y
y
y
y
y
1,7004) 0.37 390
V
V
y
y
y
y
y
y
y
y
1,7002) 0.41 455
y
V
y
y
y
y
y
y
y
y
2,0003) 0.45 270
*Indicated loads are based on ISO 10567 and do not exceed 75 % of tipping or 87 % of hydraulic capacity, max. stick length without quick coupler, lifted 360° on firm with blocked
oscillating axle
1)comparable with SAE (heaped)
2)with 2 x 50° rotator
3)rigid ditch cleaning bucket
4)with 2 x 45° rotator
Max. material weight y = ≤ 1.8 t/m3, y = ≤ 1.5 t/m3, V = ≤ 1.2 t/m3, – = not authorised
10
A 912 Compact Litronic
Equipment
Undercarriage
Dual-circuit braking system
Stabilizer blade rear
Stabilizer blade rear, divided blade
Stabilizer blade front, divided blade rear
Stabilizer blade front, outriggers rear
4-wheel steering (front wheel steering, 4-wheel steering, crab steering)
Digging brake, automatic
Tyres (twin tyres) Liebherr EM 22 290/90-20
Tyres (twin tyres) Mitas EM 22
Individual control outriggers
Travel speed levels (four)
Load holding valve on each stabilization cylinder
Powershift transmission, semiautomatic
Parking brake, maintenance-free
Tyres, variants
Protection for travel drive
Protection for piston rods, stabilizer cylinder
Speeder *
Tool equipment, extended
Tool box left – lockable
Tool box right – lockable
Operator’s Cab
•
+
+
+
+
+
+
+
•
+
•
•
•
•
+
+
+
+
+
•
+
Uppercarriage
Uppercarriage right side light, 1 piece, LED
Uppercarriage rear light, 2 pieces, LED
Refuelling system with filling pump
Main battery switch for electrical system
Engine hood with gas spring
Warning beacon on uppercarriage, LED
Service doors, lockable
+
+
+
•
•
+
•
Hydraulic System
Shut-off valve between hydraulic tank and pump(s)
Pressure test fittings
Accumulator for controlled lowering of the attachment with the engine shut down
Hydraulic oil filter with integrated microfilter
Liebherr hydraulic oil from – 20 °C to + 40 °C
Liebherr hydraulic oil, biologically degradable
Liebherr hydraulic oil, specially for warm or cold regions
Bypass filter
Switchover high pressure circuit 1 and tipping cylinder
Switchover high pressure circuit 1 and two-piece boom
•
•
•
•
•
+
+
+
+
+
Storage compartment
Cab lights rear, halogen
Cab lights rear, LED
Cab lights front, halogen (above rain cover)
Cab lights front, halogen (under rain cover)
Cab lights front, LED (above rain cover)
Cab lights front, LED (under rain cover)
Left arm console, folding
Exterior mirror, electrical adjustable, with heating
Mechanical hour meters, readable from outside the cab
Roof window made from impact-resistant laminated safety glass
Operator’s seat Standard
Operator’s seat Comfort
Operator’s seat Premium
Driving alarm (acoustic signal is emitted during travel, can be switched ON / OFF)
Fire extinguisher
Front screen made from impact-resistant laminated safety glass – not adjustable
Windscreen retractable (including upper part)
Cruise control
Joystick steering
Automatic air conditioning
Fuel consumption indicator
Electric cooler
Steering wheel, wide version (cost-neutral option)
Steering column adjustable horizontally
LiDAT Plus (extended Liebherr data transfer system) ***
Automatic engine shut-down (time adjustable)
Positioning swing brake
Proportional control
Radio Comfort, control via display with handsfree set
Preparation for radio installation
Rain cover over front window opening
ROPS cab protection
Back-up alarm (acoustic signal is emitted traveling backward, can not be switched off)
Warning beacon on cab, LED
All tinted windows
Windscreen wiper, roof
Windshield wiper, entire windscreen
Door with sliding window
Top guard
Right side window and windshield made from laminated safety glass
Sun visor
Sun blind
Auxiliary heating, adjustable (week time switch)
Electronic immobilizer
Cigarette lighter
•
+
+
+
•
+
+
•
+
•
+
•
+
+
+
+
+
•
•
+
+
•
+
+
•
•
+
+
•
+
•
•
•
+
+
•
+
+
•
+
•
+
•
+
+
•
Diesel Engine
Deutz particle filter
Fuel anti-theft device
Air pre-filter with dust discharge
Preheating fuel
+
+
+
+
A 912 Compact Litronic11
Equipment
Complete Machine
•
+
+
+
+
+
+
+
+
+
+
+
•
+
•
•
+
+
+
+
+
•
•
Lubrication
Lubrication undercarriage, manually – decentralised (grease points)
Central lubrication system for uppercarriage and attachment, automatically
(without quick coupler and connecting link) **
Central lubrication system, extension for quick coupler
Central lubrication system, extension for connecting link
Special coating
Custom painting for tools
Special coating, variants
Monitoring
Rear view monitoring with camera
Side view monitoring with camera
•
+
+
+
+
+
•
•
• = Standard, + = Option
* = depending upon the country partially only 25 km/h permitted, ** = country-dependent, *** = optionally extendable after one year
Options and / or special attachments, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr in order to
retain warranty.
Liebherr-Hydraulikbagger GmbH
Liebherrstraße 12, D-88457 Kirchdorf / Iller
S +49 7354 80-0, Fax +49 7354 80-72 94
www.liebherr.com, E-Mail: [email protected]
www.facebook.com/LiebherrConstruction
Printed in Germany by Eberl RG-BK-OT LHB/VF 11839577-0.2-08.16_enGB
All illustrations and data may differ from standard equipment. Subject to change without notice.
Attachment
Boom lights, 2 pieces, halogen
Boom lights, 2 pieces, LED
High pressure circuit incl. unpressurised return line and Tool Control
Electronic lift limitation
Load lug on stick
Leak oil line, additional for working tools
Liebherr ditch cleaning bucket
Liebherr quick coupler, hydraulic or mechanical
Liebherr backhoe bucket
Liebherr tooth system
Liebherr clamshell grab
Medium pressure circuit incl. lines
Pipe fracture safety valves hoist cylinders
Pipe fracture safety valve tipping cylinder
Pipe fracture safety valve stick cylinder
Hose quick coupling at end of stick
Quick coupling system LIKUFIX
Protection for piston rod, tipping cylinder
Protection for piston rod, adjusting cylinder
Protection for bottom side of stick
Tool Control, 10 tool adjustments selectable over the display
Overload warning device
Two-piece boom