04 Massing-Parametrics

Transcription

9/13/2013
WELCOME TO: ARCH 2430,
497 Greenwich Street Project
Winka Dubbeldam – Archi-Tectonics
BUILDING TECHNOLOGY IV
497 Greenwich Street Project Winka Dubbeldam – Archi-Tectonics
© ARCHI-TECTONICS 2012
http://www.archi-tectonics.com/projects/497-greenwich-building/construct
http://oasisnyc.net/map.aspx
Mixed Residential & Commercial
Block: 594
Lot: 7504
Lot Area: 8,187 sqft
Primary Zoning: C6-2A
Floor Area Ratio: 0.68
Max FAR: 6.02
Zoning Map: 12A
Current Zoning Map:
http://www.nyc.gov/html/dcp/pdf/zone/map12a.pdf
http://www.archi-tectonics.com/projects/497greenwich-building/construct
Block: 594
Lot: 7504
Max FAR: 6.02
Zoning Map: 12A
Historical Zoning Maps:
http://www.nyc.gov/html/dcp/pdf/zone/historical_
maps/maps12a.pdf
Block: 594
Lot: 7504
Max FAR: 6.02
Zoning Map: 12A
1
9/13/2013
Block: 594
Lot: 7504
Max FAR: 6.02
Zoning Map: 12A
Block: 594
Lot: 7504
Max FAR: 6.02
Zoning Map: 12A
Block: 594
Lot: 7504
Max FAR: 6.02
Zoning Map: 12A
2
9/13/2013
© ARCHITECTONICS
2012
Sample building massing
dimension between
planes to ensure that
parametric
relationships will work
between planes rather
than line segments
3
9/13/2013
Mess surfaces dimensioned
dimension all faces that you
want to control
Add parameters or labels to your
dimensions to control them
Use the padlock on the dimension string to
lock some of the levels to set elements to
control the model will move
Open the family types dialog box
You can rationalize and numbers or alter
the dimensions in this dialog box
in this dialog box you can control the
labeled parameters
Note you can use the modify key to
change the parameters names
4
9/13/2013
You can build mathematical
relationship between your
parameters in this dialog box
You can give any dimension
string any parameter you already
developed
497 Greenwich Street Project Winka Dubbeldam – Archi-Tectonics
In this case a 10 foot setback is
built into the massing model
http://www.archi-tectonics.com/projects/497-greenwich-building/construct
Note you can also use the
join command to construct
your massing models
Make sure you’ve developed and set up all
your levels in your Revit project file before you
import your Revit conceptual masse familys
5
9/13/2013
What’s wrong with this picture?
Once you’ve selected your conceptual
mass you can place floors by mass
You can then check the
levels you wish to turn
into floor slabs
• Floor slabs have been placed in lobby and gymnasium the masses
• no cellar slabs have been placed
add massing for
your cellars if
necessary
Locate your model axis to an easy
point for intersection into the Revit
project file. In this case the model axis
should be moved one of the corners of
your property line
insert all your separate mass family files into your project file [you can
use the place but if you’re inside your conceptual mass family]
now you can use the mass floors tools to
create floor slabs in individual masses
you’ll have to add the floors to each
mass elements separately
[in this case ground-level and seller
slabs are being created]
6
9/13/2013
check for conflicts between your zoning
envelope and your project mass
After testing variance and correcting for
zoning issues you can upload your revised
massing model into your project file
497 Greenwich Street
Your Revit project file will be updated
automatically once you’ve loaded your
new conceptual mass family
http://downtownlife.co/images/uploads/buildings/photos/497-Greenwich-Avenue.jpg
Creating square foot schedules [tables] based
on your massing floors
7
9/13/2013
8
9/13/2013
END
http://www.architizer.com/firms/associated-fabrication/
9

04 Massing-Parametrics

Transcription

Similar documents

The Next Zafarrancho, in Greenwich Cove

Work Train Greenwich

45 West 8th Street New York NY 10011

What does “Commercial/Industrial Mean to NAHBA Today?

Creekside at Berkeley Hills

Themis Klarides - Retired Men`s Association of Greenwich, Inc.

2OI5 UPCOMING E\rENTS - East Greenwich Animal Protection

Halloween Dance Tricks Are Always A Treat