MATRIX Product Catalogue - Matrix Process Solution

Transcription

Process Solutions
Matrix Process
Process Solutions
Solutions
Matrix
Matrix
MatrixProcess
ProcessSolutions
Solutions
Matrix
of processing
processing industry
industry experience
experience in
inthe
theform
formof
ofaa
Matrix process
Process solutions
Solutions is
is the
the culmination
culmination of
of over
over 50
50 years
years of
dynamic,
service
orientated
company.
dynamic, service orientated company.
At
our commitment
commitment to
to process
process technology
technology improvements
improvements through
throughsmart
smartdesign
designand
andimplementation,
implementation,
At MATRIX,
MATRIX, our
make
us
your
ideal
business
partner.
As
the
largest
Alfa
Laval
flow
distributor
in
Australia
,
we
offerdistribution
make us your ideal business partner. As the largest Alfa Laval flow distributor in Australia , we offer
distribution
and
technical
support
at
your
fingertips.
and technical support at your fingertips.
MATRIX
office warehouses
warehouses in
in three
three major
major locations,
locations, Melbourne,
Melbourne,Adelaide
Adelaideand
andBrisbane,
Brisbane,ensuring
ensuringtotal
total
MATRIX have
have office
coverage,
plus quick
quick supply
supply for
for you
you critical
critical process
processrequirements.
requirements.
coverage, plus
24 hours, 7 days…
you can rely on us to serve you best.
Matrix
MatrixProcess
ProcessSolutions
Solutions
Unit
7
Unit 7/ /33
33Meakin
MeakinRd
Rd
Meadowbrook QLD
QLD 4131
4131
Meadowbrook
P:07
073200
32003433
3433
P:
F:07
073200
32002477
2477
F:
Matrix Process
Process Solutions
Matrix
Unit 88 // 36
36 Birralee Rd
Unit
Regency Park
Park 5010
5010
Regency
P:
08
8244
1322
P: 08 8244 1322
F: 07 8244 1722
F: 07 8244 1722
MatrixProcess
ProcessSolutions
Solutions
Matrix
Unit11/ /25
25Kilpa
KilpaRd
Rd
Unit
Moorabbin
3189
Moorabbin 3189
P:03
039553
95530928
0928
P:
F: 03 9553 0987
F: 03 9553 0987
ABOUT THIS
ABOUT
THIS PRODUCT
PRODUCT CATALOGUE.
CATALOGUE.
This Catalogue
Catalogue is
This
is copyrighted
copyrighted material.
material. All
All rights
rightsare
arereserved.
reserved.©©
MPS does
does not
MPS
not accept
accept responsibility
responsibility for
for any
anyloss
lossor
orother
otherdamage
damagecaused
causedtotoany
anyperson
personororcompany
companyasasa aresult
resultofof
the information
information contained
the
contained herein.
herein.
MPS reserves
reserves the
MPS
the right
right to
to alter
alter or
or improve
improve any
anytechnical
technicalaspect
aspectofofthe
thedata
datacontained
containedwithin.
within.
All
pictures
are
to
be
used
as
a
guide
only.
Actual
goods
may
differ
slightly
from
All pictures are to be used as a guide only. Actual goods may differ slightly fromthe
thepictures
picturesshown.
shown.
All thereserves
technicalthe
information
provided
publication
is provided
in good
faith
and is correct at time of printing.
MPS
right to change
anywithin
pricesthis
listed
in the catalogue
without
prior
notice.
Detailed
product information
data on anyprovided
productswithin
listed this
in this
catalogueiscan
be obtained
from
MPS
office.
All
the technical
publication
provided
in good
faithyour
andnearest
is correct
at time
of printing.
Or
visit
our
web
site
for
all
product
data
sheets
and
associated
information.
Detailed product data on any products listed in this catalogue can be obtained from your nearest MPS office.
Or visit our web site for all product data sheets and associated information.
EFTPOS
Matrix Process Solutions
Matrix
Process Solutions
Solutions
Matrix Process
DISCOUNTPUBLICATIONS
PAGE
AVAILABLE
AVAILABLE
PUBLICATIONS
1000 CLAMP FITTINGS
1010 WINE FITTINGS
1001 UNIONS
1011 LKB VALVES
1002 ALL BENDS
1012 LKC-2 VALVES
1003 TRI-CLOVER SEALS
1013 FLANGES
1004 REDUCERS
1005 TEE'S
Alfa Laval Complete
Alfa
Laval
Complete
INDICATION
1006
Product
Catalogue
Product Catalogue
Alfa Laval Complete
Alfa Laval Complete
Spare Parts
Spare Parts
Alfa Laval Pump
Alfa Laval Pump
Handbook
Handbook
Keofitt Product
SSP PUMPS
SSP PUMPS
Catalogue
Catalogue
Keofitt
Product
Catalogue
Keofitt Product
Catalogue
Matrix Process
Solutions
Catalogue
1007 TUBE CLAMPS
AVAILABLE PUBLICATIONS
1008 BSP
1009 TUBE
MCD PHE Gasket
MCD PHE Gasket
Product Catalogue
Product
Alfa
LavalCatalogue
Complete
Product Catalogue
LIAG Product
LIAG Product
Catalogue
Catalogue
Alfa Laval
Complete
Spare Parts
ABB Motors
ABB Motors
Catalogue
AlfaCatalogue
Laval Pump
Handbook
Alfa Laval Complete
Product Catalogue
Alfa Laval Complete
Spare Parts
Alfa Laval Pump
Handbook
LIAG Product
Catalogue
ABB Motors
Catalogue
GEMU Complete
Product Catalogue
ABB Motors Catalogue
MCD PHE Gasket
Product Catalogue
MCD PHE Gasket
Product Catalogue
Keofitt Product
Catalogue
SSP PUMPS
Catalogue
DMN Westinghouse
Product Catalogue
M
M
M
ns
s
s
s
Matrix Process
Process Solutions
Matrix
Solutions
Page
Air Blow Valves
LKBV
27
180 Degree
Mixproof Valves
Page
SMP-BC
35
7
Spring Free ( Ygros )
29
12
Unique SSV
Unique SSV Aseptic
16
Page
Strainers
LKIF
28
Matrix
over 50 years of processing
in the form of a 28
LKUV-1 process solutions is27the culmination of
Unique
LKVF - coarse
35 industry experience
LKSF - Slot strainer
28
At MATRIX, our commitment to process Non
technology
improvements through smart design
and
implementation, 28
Bends
Return Valves
Y Type
- coarse
make
us your ideal business
largest Alfa Laval flow distributor
in Australia
we offer
90 Degree
BSP Y ,Type
28
17
7 partner. As theLKC-2
distribution
and
technical
support
at
your
fingertips.
45 Degree
BSP
13
7
Tank Mixing Equipment
MATRIX
haveRadius
office warehouses
in three major locations, Melbourne, Adelaide and Brisbane,
ensuring total
90 Degree Long
Agitators
7
coverage, plus quick supply for you critical
process
requirements.
Piston
Valves
ISO Mix
BSP Fittings
24 hours, 7 days…
Unique SSV Manual
you
can rely on us
to serve you
best.
Butt Weld
Unique SSV Regulating
13
16
BSP 2 Piece
27
Ball Valves
BSP 1 Piece
13
SSSV
13
SRC
13
BSP 3 Piece
Sanitary Ball Valves
Butterfly Valves
25
16
LKB
LKB-F
16
LKLA Actuators
17
LKB Handles
16
LKLA-T Actuators
Mounting Brackets
Wafer & Lugged
Cleaning Equipment
LKRK static spray balls
Toftejorg Cleaning Heads
Diaphragm Valves
Full Flow
17
16
24
32
32-33
24
Aseptic Weir type
29
17
FLANGES
Float Valves ( LKSV )
27
Unit 8 / 36 Birralee Rd
Indication Units
ThinktopsRegency Park 5010
20
INDI Tops P: 08 8244 1322
21
F: 07 8244 1722
Lateral sensors
21
Manways
Zorzini
ABOUT
LKM
THIS
LKAP
Magnetic Mixers
16
Tank Outlet Valves
Unique SSV Tank Outlet
16
Unique-TO
16
Tees
25
Pipetite
Equal
Unit 7 / 33 Meakin Rd
Y' Tees
Meadowbrook QLD 4131
Pulled Tee's
P:Reducing
07 3200
3433
Tee's
F:Swept
07 3200
2477
Tee's
22
Pumps
LKH centrifugal
MR Liquid ring
GM centrifugal
Rotary Lobe SRU
Air operated Diaphragm
Trolley Pumps
Wine Pump Over
Reducers
Concentric Reducers
Eccentric Reducers
Regulating Valves
45
44
46-47
48
27
Safety Valves
Zorzini vent valves
Pressure Relief Valves
PRODUCT 35
CATALOGUE.Sample Valves
4
34
31-31
6
In-line
36
9
9
9
9
9
9
10
10
10
15
7
BSM Union Parts
CIP Union
Parts - Flat faced
Matrix Process
Solutions
NZ Kilpa
Union Parts
Unit 1 / 25
Rd
IDF
Unions
Moorabbin 3189
SMS Unions
P: 03 9553
0928
DIN Unions
F: 03 9553
0987
Keofitt
35
Long Tang
Union Components
35
16
7
Saddle
34
41
41
Plain
Bossed
27
27
Rotary Swing Joints
Tube Clamps
8
27
SPC-1
Insulated
8
CPMI-D60
SPC-2
316 s/s 16#. (1528)
Square section
43
27
Tube
304 s/s 16#. (1528)
49
CPM-I
CPM-O
Crosses
44
40
Clamp Unions
Tri-Clover Gaskets
Wine Unions
Hire Pumps
7
7
3
3
3
5
5
5
4
4
5
49
26
LKM Sample
Valves
This Catalogue is copyrighted material. All rights
are reserved.
©
Miscellaneous
Fittings
Zorzini
MCD PHE
Gaskets as a result
38-39
26 to any person
MPS does not
accept responsibility for any loss
orSample
other Valves
damage caused
or company
of
Hoseinformation
Tails butt weldcontained 14
the
herein.
Domedreserves
end caps the right to 14
SHUTTER
VALVESaspect of the data contained
Heat within.
Exchangers
37
MPS
alter or improve
any technical
Reducing
Liners
LIAG
Shutter
Valve
23-23
6
All pictures are to be used as a guide only. Actual goods may differ slightly from the pictures shown.
) Shutter
Valve without
24
Technical Information
52
MPS reserves the right to change any pricesKoltec
listed( MH
in the
catalogue
prior notice.
Miscellaneous
Tools
All the technical information provided within this publication is provided in good faith and is correct at time of printing.
Tube Cutting
blocks data on any
SightinGlasses
6 products listed
Detailed
product
this catalogue can be obtained from your nearest MPS office.
34
BSM
Hex
Spanners
Tankand
styleassociated information.
6
Or visit our web site for all product data sheets
Round Nut Spanners
EFTPOS
INDEX
DISCOUNT PAGE
DO YOU HAVE ALL THE RIGHT ANSWERS FOR ORDERING TUBE & FITTINGS ?
1010 WINE FITTINGS
1000 CLAMP FITTINGS
It is recommended the following be used as an approximate guide only.
1011 LKB VALVES
1001 UNIONS
1 All Tube is to be made of a long hole surrounded by metal or plastic.
1012 LKC-2 VALVES
1002 ALL BENDS
2 All Tube is to be hollow throughout the entire length -do not use holes of different length than the pipe.
1013 FLANGES
3 The internal diameter of the tube must not exceed the overall diameter otherwise the hole will be on the outside.
1004 REDUCERS
4 All tube is to be supplied with nothing in the hole so the product or other stuff can be put inside at a later date.
1005 TEE'S
5 All tube should be supplied without rust; this can be more easily applied at the job site.
INDICATION
1006 Some
Note:
suppliers are now able to supply pre-rusted tube. If available in your area, this product is recommended
as it will save a great deal of time on the job site.
1007 TUBE CLAMPS
6 All tube over 150m in length should have the words "Long Tube" clearly painted on each end so people will know it’s
BSP
1008tube
long
TUBE
1009 over
7 Tube
3 km in length must also have the words "Long tube" painted in the middle so people will not have to walk
the entire length of the tube to determine whether or not it is a long or short length of tube.
8 All tube over 150mm in diameter must have the words " Large tube" painted on it so it can not be mistaken for
small tube
9 Flanges should be used on all tube. Flanges must have holes for bolts quite separate from the big hole in the middle.
10 When ordering 90, 45, or 30 degree elbows, be sure to specify right hand or left hand, otherwise you will end up
going the wrong way.
11 Be sure to specify to your supplier whether you want level, uphill or downhill tube. If you use downhill tube for
going uphill the liquid will flow the wrong way.
12 All Unions should have either right hand or left hand threads, but do not mix threads. Other wise as the union is
being screwed on one tube end, it is being unscrewed at the other .
13 Where tube is being installed in a "non-pressure" situation,( eg gravity return, overflow or drain ) the word "Top"
must be painted in a prominent position so the liquid runs in the bottom of the tube.
Alfa Laval Complete
Alfa Laval Complete
Alfa Laval Pump
Keofitt Product
14 The
wordCatalogue
"End" showing where the hollow
shall be clearly marked on allCatalogue
such
Product
Sparestops
Parts and the solid pipe beginsHandbook
sections. No length shall have an "End" more than halfway from the middle, nor more than one "end" per length.
15 Each tube length must be clearly marked with an arrow denoting direction of flow on each end..
16 Tube will be either "Uni-directional" or " Bi-directional".
MCD PHE Gasket
Product Catalogue
Page 2
GEMU Complete
Product Catalogue
DMN Westinghouse
Product Catalogue
M
M
M
ns
s
Matrix Process
Process Solutions
Matrix
Solutions
BSM UNIONS
GASKET OPTIONS
Matrix process solutions
is the
culmination
50 years of processing industry
experience
in the form of a
EPDM,
NITRILE,
PTFEof&over
VITON
Thread
Type:
At MATRIX, our commitment
to process
technology
improvements through smart design
and
implementation,
BSM Unions
Male
Part
BSM
Gasket
- BSM Gasket Hex
Nut
304s/s
Liner 316s/s
make us your ideal business
partner.
As
the
largest
Alfa
Laval
flow
distributor
in
Australia
,
we
Complete
316s/s
EPDMoffer
Teflon
distribution and technical support at your fingertips.
MATRIX have office warehouses in three major locations, Melbourne, Adelaide and Brisbane, ensuring total
coverage, plus quick supply for you critical process requirements.
Size
24 hours,
7 days…
9611300575
9611307740
9611303890
25mm / 1"
you
can rely on
us to serve
you best.9611300576
9611303891
9611307741
38mm / 1.5"
51mm / 2"
63mm / 2.5"
76mm / 3"
101mm / 4"
125mm / 5"
150mm / 6"
9611307742
9611303892
9611300577
9611307744
9611303894
9611300579
BSMMP1256
BSMHN1254
9611307743
9611307745
BSMUN1256
BSMUN1506
9611303893
9611303895
BSMMP1506
9611300578
9611300521
BSMHN1504
9612413801
9611992821
9612413803
9611992823
9612413802
9611992822
9612413804
9611992824
9611992825
9612413805
BSMOR025T
BSMOR040T
BSMOR050T
BSMOR065T
BSMOR080T
9611992826
BSMOR100T
Unit 7 /BSMOR125E
33 Meakin Rd
BSMWL1256
N/A
Meadowbrook
QLD 4131
BSMWL1506
BSMOR150E
BSMOR150T
P: 07 3200 3433
F: 07 3200 2477
9612413806
CIP UNIONS - FLAT FACED
CIP GASKET OPTIONS
EPDM. PTFE & VITON
Thread Type:
CIP Unions
Complete
Male Part
316s/s
Hex Nut 304s/s
Liner 316s/s
CIP Gasket EPDM
CIP Gasket Teflon
BSMCIPUN025
9612039401
9611300575
9612412101
9612427007
CIPOR025T
9612039403
9611300577
9612412103
9612427009
CIPOR050T
9611300579
9612412105
Matrix Process9612427011
Solutions
Size
25mm / 1"
38mm / 1.5"
51mm / 2"
63mm / 2.5"
76mm / 3"
BSMCIPUN040
BSMCIPUN050
BSMCIPUN065
BSMCIPUN080
Matrix
Solutions
101mm
/ 4"Process
BSMCIPUN100
Unit
125mm
/ 5"8
/ 36 Birralee
Rd
BSMCIPUN125
Regency
Park
5010
150mm / 6"
BSMCIPUN150
P: 08 8244 1322
F: 07 8244 1722
9612039402
9612039404
9612039405
9612039406
CIPMP1256
CIPMP1506
9611300576
9611300578
9611300521
BSMHN1254
BSMHN1504
9612412102
9612427008
9612412104
9612427010
9612412106
Unit 1
CIPOR040T
CIPOR065T
CIPOR080T
9612427012
/ 25 Kilpa
Rd
CIPOR100T
CIPOR150E
9553
0928
CIPOR150T
CIPWL1256
MoorabbinCIPOR125E
3189
CIPWL1506
P: 03
F: 03 9553 0987
CIPOR125T
NZ UNIONS
NZ Unions
Complete
ABOUT THIS PRODUCT CATALOGUE. ( Hex
Nuts )*
Male Part
Round Nut
NZ Gasket Liner 316s/s
316s/s
304s/s
EPDM
This Catalogue is copyrighted material. All rights are reserved. ©
MPS does not accept responsibility for any loss or other damage caused to any person or company as a result of
the information contained herein.
MPS reserves the right to alter or improve any technical aspect of the data contained within.
MPS reserves the rightSize
to change any prices listed in the catalogue without prior notice.
25mm / 1"
9611303890
All the technical information
providedBSMNZUN025
within this publication
is provided9612411907
in good faith and9612412201
is correct at time9612417107
of printing.
38mm / 1.5"
9611303891
BSMNZUN040
9612411908
9612412202
9612417108
51mm / 2"
9611303892information.
BSMNZUN050
9612411909
9612412203
9612417109
Or visit our web site for
all product data
sheets and associated
63mm / 2.5"
76mm / 3"
101mm / 4"
BSMNZUN065
9611303893
9612411910
9612412204
BSMNZUN100
9611303895
9612411912
9612412206
BSMNZUN080
9611303894
* Available with Round nuts on request.
9612411911
9612412205
9612417110
9612417111
EFTPOS 9612417112
Page 3
MatrixProcess
ProcessSolutions
Solutions
Matrix
M
M
M
DISCOUNT
PAGE
CLAMP
UNIONS
1000 CLAMP FITTINGS
Clamp Union
1001
Complete (Type 1
UNIONS EPDM Gasket)
FITTINGS
1010 WINE
Standard
Short Ferrules
Heavy Duty
Ferrules
(12.5mm) 1011 LKB VALVES
Clamp
(28.5mm)
1002 ALL BENDS
1012 LKC-2 VALVES
1013 FLANGES
1004
SizeREDUCERS
13mm / 1/2"
TCUNION0156
9611340178
25mm / 1"
TCUNION0256
9611340180
TEE'S
1005/ 3/4"
19mm
TCUNION0206
INDICATION
1006/ 1.5"
38mm
TCUNION0406
51mm / 2"
TCUNION0506
TUBE CLAMPS
1007/ 2.5"
TCUNION0656
63mm
76mm / 3"
1008 BSP
101mm
/ 4"
150mm / 6"
TUBE
1009
200mm/8"
TCUNION0806
TCUNION1006
TCUNION1506
9611340179
9611340320
9611340181
9611340321
9611340183
9611340323
9611340182
9611340184
9611340185
TCUNION2006
9611340322
9611340324
End Cap
High Pressure
Clamp 13MHP
9612011200
9611340599
13MHP-0.5
9611991508
9611340600
9630210180
9611991509
9611340601
9630210040
9611991511
9611340603
9611991510
9611340325
9611991512
9611340187
9612011207
9611340186
9612011206
9611340602
9611340604
9611340605
9630210213
9630210248
9630210042
13MHP-6
9611340606
Si
25
EPDM Type 1
VITON Type 1
NITRILE Type 1
Solid PTFE Type
EPDM Type 2
1
NITRILE Type 2
38
51
63
76
10
Size
13mm / 1/2"
19mm / 3/4"
25mm / 1"
38mm / 1.5"
51mm / 2"
9630290273
9630290265
9630290141
9630290044
9630290043
63mm / 2.5"
9630290048
Alfa Laval Complete
76mm
/ 3" Catalogue
9630290036
Product
101mm / 4"
150mm / 6"
9630290018
9630290234
9630290274
9630290266
9630290009
9630290022
9630290030
9630290272
9630290270
9630298451
9630298224
9630298453
9630298228
9630290264
9630290271
9630298542
9630298227
9630290040
9630298454
Alfa Laval Complete
9630290049
Spare Parts 9630298455
9630290053
9630298456
9630290220
9630290112
Si
9630290031
9611990765
9630290017
9611990767
9630290038
9630298223
Alfa Laval Pump 9630290035
9630298225
9630290138
Handbook
9630298226
9630290025
9630298235
9630290131
9611990766
9611990768
Keofitt
Product
9611990769
Catalogue
9611990770
9630298220
Gasket PTFE / FPM
MESH SCREEN
TRI-CLOVER HOSE
( Teflon / Viton )
GASKETS 40MPS-U TAILS (14MPHR)
Type 3
TRI-CLOVER ROTARY SWING JOINT
38mm / 1.5"
9630290072
9630290073
51mm / 2"
9630290074
MCD PHE Gasket
63mm / 2.5"
9630290075
Product Catalogue
76mm / 3"
9630290076
101mm / 4"
9630290077
150mm / 6"
Page 4
9630290085
Various micron sizes
available. For More
information, contact
your nearest Matrix
Office.
Size
25mm / 1"
213384
213382
213383
GEMU Complete
Product Catalogue 210722
211534
211535
ROTARY SWING JOINT A12MPS
Code
Size
210135
38mm / 1.5"
210138
76mm / 3"
210136
51mm / 2"
ABB Motors
Catalogue
63mm / 2.5"
210137
210140
101mm / 4"
DMN Westinghouse
Product Catalogue
Si
25
38
51
63
76
10
ns
s
Matrix Process
Process Solutions
Matrix
Solutions
WINE UNIONS
is the
culmination
of over 50 years
of processing
in the form
a
Wine Nut
Male Part
Butt
Liner Butt
Linerindustry
Slip On experience
Wine Gasket
NutofStainless
dynamic, service orientated
company.
Brass
Weld
Weld
Weld
White Rubber
Steel
At MATRIX, our commitment to process technology improvements through smart design and implementation,
coverage,
Size plus quick supply for you critical process requirements.
25mm / 1"
WINMP0256
WINLB0256
WINNU0254
24 hours, 7 days…
51mm / 2"
WINMP0506
WINNU0504
WINLB0506
you
can rely on
us to serve
you best.WINNU0654
63mm / 2.5"
WINLB6506
WINMP0656
38mm / 1.5"
76mm / 3"
101mm / 4"
WINMP0406
WINMP0806
WINMP1006
WINLB0406
WINLB0806
WINLB1006
WINNU0404
WINNU0804
WINNU1004
Thread Type:
Size
25mm / 1"
38mm / 1.5"
51mm / 2"
Complete Union Male Part 316s/s
9611330955
3131900621
9611330957
3131900153
9611330956
63mm / 2.5"
9611330958
101mm / 4"
9611330960
76mm / 3"
9611330959
3131900631
Liner 316 s/s
Nut 304 s/s
3131900691
9611300054
3131900681
3131900273
3131900163
3131900711
9611303815
9611303835
3131900173
3131900721
9611300053
9611300055
9611300056
9611300057
9611303970
9612412201
WINOR025WR
WINNU0254S
9612412203
WINOR050WR
WINNU0504S
9612412202
WINOR040WR
9612412204
WINOR065WR
9612412206
WINOR100WR
9612412205
WINNU0404S
WINNU0654S
WINNU0804S
WINOR080WR
WINNU1004S
IDF
P: 07 3200 3433
Gasket NBR*
F: 07 3200 2477
3131900311
UNION
3131900321
3131900331
3131900341
3131900351
9611991477
*: EPDM, NBR, VITON Gasket options available
SMS UNION
Thread Type:
Size
DN25
DN40
DN50
DN65
DN80
DN100
Complete Union Male Part 316s/s
9611330382
9611330383
9611330384
191001
Liner 316 s/s
Nut 304 s/s
190996
190615
190994
191003
190997
191004
Matrix
Process Solutions
9611330385
191005
Unit
8
/ 36 Birralee
Rd
9611330386
191006
Regency
Park
5010
9611330387
3131708173
P: 08 8244 1322
F: 07 8244 1722
190613
190616
190998
190617
3131708852
3131708841
ABOUT THIS PRODUCT CATALOGUE.
190999
190618
Gasket EPDM*
3131703753
3131703772
3131703785
Matrix
Process Solutions
3131703793
Unit 1 / 25 Kilpa Rd
3131703803
Moorabbin 3189
3134708862
P: 03 9553 0928
F: 03 9553 0987
DIN UNION
Thread Type:
This Catalogue is copyrighted material. All rights are reserved.
©
Size the information
Complete Union
Male Part
316s/s Liner 316 s/s
Nut 304 s/s
Gasket NBR*
contained
herein.
25mm / 1"
9611330394
3131800181
3131800071
3131800141
MPS reserves the right to alter or improve any technical aspect of the data 52734604
contained within.
9611330395
38mm / 1.5"
3131800191
3131800143
3131800091
All pictures
are to be used
as a guide only.
Actual goods may
differ slightly 52734606
from the pictures shown.
51mm / 2"
9611330396
3131800201
MPS reserves
the right 3131800101
to change any prices
listed in the 3131800144
catalogue without 52734607
prior notice.
63mm / 2.5"
1311800211
3131800145
52734608
3131800111
All the 9611330397
technical information
provided within
this publication
is provided in good
faith and is correct at time of printing.
76mm / 3"
9611330398
3131800221
3131800146
52734609
3131800121
Detailed
product data on
any products listed
in this catalogue
can be obtained
from your nearest MPS office.
101mm / 4"
3131800231
3131800148
Or visit9611330399
our web site for 3131800341
all product data sheets
and associated
information. 52734611
EFTPOS
Page 5
DISCOUNT PAGEUNION PARTS
MISCELLANEOUS
1000 CLAMP FITTINGS
BSM Blank
Hex Nut
1001 UNIONS
1002 ALL BENDS
1012 LKC-2 VALVES
1013 FLANGES
Size
1004
25mm /REDUCERS
1"
BSMBN0254
38mm / 1.5"
BSMBN0404
1005
51mm /TEE'S
2"
BSMBN0504
63mm / 2.5"
BSMBN0654
1006
76mm /INDICATION
3"
BSMBN0804
101mm / 4"
BSMBN1004
CLAMPS
1007 TUBE
125mm
/ 5"
BSMBN1254
150mm / 6"
BSMBN1504
1008 BSP
BSM REDUCING
LINERS Machined
BSM Blank1010 WINE FITTINGS
Cap
1011 LKB VALVES
Size
9611330629
38 x 25mm
9611330630
51 x 25mm
9611330631
51 x 38mm
9611330632
63 x 25 mm
9611330633
63 x 38 mm
9611330634
BSMBC1256
63 x 51 mm
76 x 25 mm
BSMBC1506
76 x 38 mm
76 x 51 mm
76 x 63 mm
1009 TUBE
100 x 63mm
100 x 76mm
9611307791
9611307801
9611307811
9611307820
9611307821
9611307831
9611307840
9611307841
9611307851
9611307861
9611307871
9611307881
SPANNERS
AVAILABLEHEX
PUBLICATIONS
SPANNERS HEX SPANNERS
ALLOY
ALUMINIUM
ROUND NUT
SPANNERS
ROUND NUT
SPANNERS
(Articulated)
Size
10 - 20mm
25mm / 1"
38mm / 1.5"
51mm / 2"
SPANN025ALLOY
SPANN025ALUM
SPANN050ALLOY
SPANN050ALUM
SPANN040ALLOY
63mm / 2.5"
SPANN065ALLOY
Alfa Laval Complete
76mm
/ 3" Catalogue
SPANN080ALLOY
Product
101mm / 4"
SPANN100ALLOY
125mm / 5"
150mm / 6"
SPANN040ALUM
9611901027
9611901028
3131709351
SPANN065ALUM
Alfa Laval Complete
SPANN080ALUM
Spare Parts
SPANN100ALUM
SPANN125ALUM
SPANN150ALUM
Alfa Laval Pump
9611901029
Handbook
Keofitt Product
Catalogue
9611901030
TOOLS
TUBE CUTTING BLADES TO SUIT GF CUTTERS
Code
CSI035
Size
Tube 63mm 64 teeth
TUBE CUTTING BLOCK
Code
25mm / 1"
9611981072
51mm / 2"
9611981071
( designed t/s dairy tube)
9611981073
MCD PHE Gasket
Product Catalogue
Page 6
GEMU Complete
Product Catalogue
Size
9611981070
9611981074
38mm / 1.5"
63mm / 2.5"
76mm / 3"
9611981075
101mm / 4"
ABB
Motors Catalogue
DMN Westinghouse
Product Catalogue
M
M
M
ns
s
Matrix Process
Process Solutions
Matrix
Solutions
BENDS
Matrix process solutions is the culmination of over 50 years of processing industry experience in the form
a 3xD
90ofDeg
Deg Polished
90 Deg Polished 45 Deg Polished
180 Deg
90 Deg 1D
dynamic, service 90
orientated
company.
Long Radius
304s/s
316s/s
316s/s
Polished 316s/s
bends
to process
technology improvements
through
smart design and
implementation,
316s/s
Size
BENDP0156090
BENDP0156045
24 hours, 7 days…
18mm / 3/4"
BENDP0204090
BENDP0206045
BENDP0206090
you25mm
can
rely on
us to serve
you best.
/ 1"
9612636501
BENDP0256045
9612636507
12mm / 1/2"
38mm / 1.5"
9612636502
9612636508
BENDP0406045
63mm / 2.5"
9612636504
9612636510
BENDP0656045
51mm / 2"
76mm / 3"
101mm / 4"
125mm / 5"
150mm / 6"
9612636503
9612636505
9612636506
BENDP1254090
BENDP1504090
9612636509
9612636511
9612636512
BENDP1256090
BENDP1506090
BENDP0506045
BENDP0156180
BENDP0206180
BENDP0256180
BENDP02561XD
BENDP0506180
BENDP05061XD
BENDP0406180
BENDP0656180
9612928268
BENDP04061XD
9612928269
9612928270
BENDP06561XD
9612928271
BENDP08061XD
9612928272
BENDP1006180
9612928273
BENDP1006045
BENDP10061XD
BENDP1256180
BENDP1256045
P: 07 3200 3433
BENDP1506045
BENDP1506180
F: 07 3200
2477
Zero Tangent and Unpolished
bends
available on request.
BENDP0806045
BENDP0806180
TUBE CLAMPS
PLAIN
BOSSED
INTERLOCKING INTERLOCKING
SADDLE
DOUBLE
BOLTED
304 S/S
LONG TANG
Size
12mm / 1/2"
18mm / 3/4"
Regency Park 5010
P: 08 8244 1322
F: 07 8244 1722
25mm / 1"
32mm / 1.25"
38mm / 1.5"
CLAMP0204
CLAMP0254
CLAMP0324
CLAMP0404
51mm / 2"
CLAMP0504
76mm / 3"
CLAMP0804
63mm / 2.5"
101mm / 4"
125mm/5"
150mm/6"
200mm/8"
CLAMP0654
CLAMP1004
CLAMP0154S
CLAMP0204S
CLAMP0204L
/ 25 CLAMP0324S
Kilpa Rd
CLAMP0404B
CLAMP0404S
Moorabbin 3189
CLAMP0504B
CLAMP0504S
P: 03 9553
0928
CLAMP0654B
CLAMP0654S
F: 03 9553
0987
CLAMP0324L
CLAMP0254S
CLAMP0254B
Matrix Process
Solutions
CLAMP0324B
Unit 1
CLAMP0804B
CLAMP1004B
CLAMP0804S
CLAMP1004S
CLAMP1254S
CLAMP1504S
CLAMP2004S
CLAMP0254L
CLAMP0404L
CLAMP0504L
CLAMP0654L
CLAMP0804L
CLAMP1004L
CLAMP1254L
CLAMP1504L
250mm/10"
CLAMP2504S
This Catalogue is copyrighted material.
All rights are reserved. ©
OTHER CLAMPS ON REQUEST
MPS reserves the right to change any prices listed in the catalogue without prior notice.
EFTPOS
Page 7
DISCOUNT
PAGE
TUBE
REDUCERS
316s/s
polished
FITTINGS
1000 CLAMP
1001 UNIONS
CONCENTRIC
REDUCERS
1002 ALL BENDS
1010 WINE FITTINGS
1011 LKB VALVES
ECCENTRIC
REDUCERS1012 LKC-2 VALVES
CONCENTRIC
REDUCERS
ECCENTRIC
REDUCERS
Code
Code
101 x 25mm
CONCP100-0256
ECCEP100-0256
101 x 38mm
CONCP100-0406
101 x 63mm
CONCP100-0656
1013 FLANGES
1004 REDUCERS
1005 TEE'S
Size
Code
12 x 10mm
CONCP015-0106
20 x 12mm
CONCP020-0156
25 x 6mm
CONCP025-0066
25 x 20mm
CONCP025-0206
ECCEP025-0206
32 x 12mm
CONCP032-0156
ECCEP032-0156
32 x 25mm
CONCP032-0256
INDICATION
1006
CONCP015-0086
12 x 8mm
1007 TUBE CLAMPS
1008 BSP
TUBE
1009
25
x 12mm
32 x 18mm
CONCP025-0156
CONCP032-0206
Code
ECCEP015-0086
ECCEP015-0106
ECCEP020-0156
ECCEP025-0156
ECCEP032-0206
ECCEP032-0256
AVAILABLE
PUBLICATIONS
38 x 12mm
CONCP040-0156
ECCEP040-0156
38 x 18mm
CONCP040-0206
38 x 32mm
CONCP040-0326
51 x 10mm
CONCP050-0106
51 x 18mm
CONCP050-0206
38 x 25mm
51 x 12mm
51 x 25mm
51 x 32mm
51 x 38mm
CONCP040-0256
63 x 32mm
CONCP100-0806
ECCEP100-0806
ECCEP050-0206
ECCEP050-0326
CONCP065-0326
Alfa Laval Complete
ECCEP065-0256
Spare Parts
ECCEP065-0326
CONCP065-0506
ECCEP065-0506
ECCEP065-0406
ECCEP125-0255
125 x 63mm
CONCP125-0656
ECCEP125-0656
125 x 101mm
CONCP125-1006
ECCEP125-1006
125 x 76mm
CONCP125-0506
CONCP125-0806
150 x 25mm
150 x 51mm
CONCP150-0256
CONCP150-0506
150 x 63mm
CONCP150-0656
150 x 101mm
CONCP150-1006
200 x 51mm
CONCP200-0506
ECCEP200-0504
200Alfa
x 76mm
CONCP200-0806
Laval Pump
200 x 101mm
Handbook CONCP200-1006
ECCEP200-0806
Keofitt Product
ECCEP200-1006
Catalogue
ECCEP200-1256
200 x 63mm
200 x 125mm
CONCP200-0656
CONCP200-1256
200 x 150mm
CONCP200-1506
250 x 100mm
CONCP250-1006
250 x 200mm
CONCP250-2006
250 x 150mm
CONCP250-1506
ECCEP080-0406
300 x 101mm
CONCP300-1006
76 x 63mm
CONCP080-0656
ECCEP080-0656
300 x 200mm
CONCP300-2006
MCD PHE Gasket
GEMU Complete
Product
Catalogue
Product Catalogue
Custom
sizes
available on request.
Page 8
ECCEP150-0506
ECCEP150-0656
ECCEP150-1256
CONCP080-0406
ECCEP080-0506
ECCEP150-0405
CONCP150-1256
76 x 38mm
CONCP080-0506
ECCEP150-0254
150 x 125mm
ECCEP080-0256
76 x 51mm
ECCEP125-0806
ECCEP150-0806
CONCP080-0256
CONCP080-0326
ECCEP125-0506
CONCP150-0806
150 x 76mm
76 x 25mm
76 x 32mm
ECCEP100-0656
CONCP125-0256
125 x 25mm
125 x 51mm
CONCP150-0406
ECCEP050-0406
CONCP080-0156
ECCEP100-0506
150 x 38mm
CONCP050-0406
76 x 12mm
63 x 51mm
101 x 76mm
ECCEP100-0406
CONCP100-0506
ECCEP040-0326
ECCEP050-0256
CONCP065-0406
101 x 51mm
CONCP100-0326
CONCP150-0206
CONCP050-0256
63 x 38mm
101 x 32mm
CONCP100-0206
150 x 18mm
ECCEP050-0156
CONCP065-0206
63
x 18mm
Alfa
Laval Complete
CONCP065-0256
63Product
x 25mmCatalogue
101 x 18mm
ECCEP040-0206
ECCEP040-0256
CONCP050-0156
CONCP050-0326
Size
300 x 150mm
300 x 250mm
ECCEP150-1006
ECCEP200-0655
ECCEP200-1506
ECCEP250-1006
ECCEP250-1506
ECCEP250-2006
ECCEP300-1004
CONCP300-1506
ECCEP300-1505
CONCP300-2507
ECCEP300-2506
ECCEP300-2006
DMN Westinghouse
Product Catalogue
M
M
M
ns
s
Matrix Process
Process Solutions
Matrix
Solutions
TEES
PULLED
EQUAL
REDUCING TEES REDUCING TEES
316S/S
process 316
solutions
is the culmination
S/S
Matrix
of over 50 years of processing
industry
the form
of a TEE
EQUAL
TEE experience
EQUAL in
TEE
PULLED
Polished
Polished
Polished
At MATRIX, our commitment to process technology improvements through
smart design and
implementation,
304s/s
316s/s
316s/s
MATRIX
Size
mm
have office warehouses in three major locations, Melbourne, Adelaide and Brisbane, ensuring total
coverage,
plus
quick supply TEEPP025-0104
for you critical process requirements.
25
x8
TEERP025-0106
25 x 12
TEERP025-0156
TEEPP025-0156
Size
24 hours, 7 days…
19mm / 3/4"
you canTEERP032-0156
rely on us to
serve you best.
32 x 12
25mm / 1"
TEEPP032-0156
TEEEP0154
TEEEP0156
TEEEP0254
TEEEP0256
32 x 25
TEEEP0404
TEEEP0406
25 x 18
32 x 18
38 x 12
38 x 18
38 x 25
TEERP025-0206
TEERP032-0206
TEERP040-0156
TEEPP040-0156
63mm / 2.5"
TEERP040-0256
TEEPP040-0256
101mm / 4"
TEERP040-0206
51 x 12
51 x 32
51 x 38
63 x 12
63 x 18
63 x 25
63 x 32
32mm / 1.25"
TEEPP032-0256
TEERP032-0256
TEERP040-0326
51 x 25
TEEPP032-0120
13mm / 1/2"
38mm / 1.5"
38 x 32
51 x 18
TEEPP025-0206
TEEPP040-0206
51mm / 2"
76mm / 3"
TEEPP040-0326
125mm / 5"
TEERP050-0156
TEEPP050-0156
200mm / 8"
TEERP050-0256
TEEPP050-0256
TEERP050-0206
TEEPP050-0326
TEERP065-0156
TEEPP065-0156
TEERP065-0206
TEERP065-0256
TEEPP050-0406
TEERP065-0506
TEEPP065-0506
13mm / 1/2"
76 x 12
TEERP080-0156
TEEPP080-0156
25mm / 1"
76 x 25
76 x 32
TEERP080-0206
TEERP080-0256
TEERP080-0326
TEEPP065-0406
101 x 18
101 x 25
101
x 32
ABOUT
101 x 38
TEERP100-0206
TEERP100-0256
TEERP100-0326
THIS
PRODUCT
TEEPP0406
TEEPP0506
TEEPP0656
TEEEP0656
Unit 7 /TEEEP0806
33 Meakin Rd TEEPP0806
TEEEP0804
Meadowbrook
QLD 4131TEEPP1006
TEEEP1004
TEEEP1006
P:
07
3200
3433
TEEEP1254
TEEEP1256
TEEPP1256
F:
07
3200
2477
TEEEP1504
TEEPP1506
TEEEP1506
TEEEP0654
TEEEP2004
TEEEP2006
Size
CROEP0156
TEEYP0156
19mm / 3/4"
TEEYP0206
TEEPP080-0206
32mm / 1.25"
TEEYP0326
TEEPP080-0326
51mm / 2"
TEEYP0506
CROPP0506
Matrix Process
Solutions
CROEP0506
76mm / 3"
TEEYP0806
CROEP0806
TEEPP080-0256
MatrixTEERP080-0406
Process Solutions
TEEPP080-0406
Unit
8
/ 36 Birralee Rd
76 x 51
TEEPP080-0506
TEERP080-0506
Regency
Park 5010
76 x 63
TEERP080-0656
TEEPP080-0656
P: 08 8244 1322
F:
07 8244 1722 TEEPP100-0156
101 x 12
TEERP100-0156
76 x 38
TEEPP0326
TEEPP065-0256
63 x 51
76 x 18
TEEEP0506
TEEPP0256
TEEPP065-0206
TEEPP065-0326
TEERP065-0406
TEEEP0504
TEEEP0326
Y' PIECE
PULLED CROSS CROSS PIECE
Polished 316s/s Polished 316s/s Polished 316s/s
TEERP065-0326
63 x 38
TEEEP0324
TEEEP0206
TEEPP050-0206
TEERP050-0326
TEERP050-0406
150mm / 6"
TEEEP0204
38mm / 1.5"
63mm / 2.5"
101mm / 4"
125mm / 5"
150mm / 6"
TEEYP0256
CROPP0256
TEEYP0406
CROPP0406
CROPP0326
CROPP0656
/ 25 Kilpa
Rd
CROPP0806
Moorabbin 3189
TEEYP1006
CROPP1006
P: 03 9553
0928
TEEYP1256
CROPP1256
F: 03 9553 0987
TEEYP0656
Unit 1
TEEYP1506
CROPP1506
CROEP0206
CROEP0256
CROEP0326
CROEP0406
CROEP0656
CROEP1006
CROEP1256
CROEP1506
TEEPP100-0206
TEEPP100-0256
45 DEGREE
TEES 316S/S
TEEPP100-0326
CATALOGUE.
TEEPP100-0406
TEERP100-0406
101
x 51Catalogue
TEEPP100-0506
TEERP100-0506
This
is copyrighted
material. All
SWEPT TEE
Polished 316s/s
rights are reserved. ©
TEEPP100-0656
TEERP100-0656
does not
accept responsibility
for any loss or other damage caused to any person or company as a result of
101
x 76
TEEPP100-0806
TEERP100-0806
the
information
contained herein.
125
Allx 51
pictures TEERP125-0506
are to be used asTEEPP125-0506
a guide only. Actual goods may differ slightly from the pictures shown.
MPS reserves the right to change any prices listed in the catalogue without Size
prior notice.
1"
TEEAP025645
150 x 25
TEERP150-0256
TEEPP150-0256
All the technical
information provided
within this publication is provided in 25mm
good /faith
and
is correct at timeTEESP0256
of printing.
150 x 32
TEEAP040645
TEESP0406
38mm / 1.5"
TEERP150-0326
TEEPP150-0326
150 x 38
TEEAP050645
TEESP0506
51mm / 2"
TEEPP150-0406
Or visit our TEERP150-0406
web site for all product
data sheets and associated information.
101
x 63
MPS
150 x 51
150 x 63
150 x 76
150 x 101
TEERP150-0506
TEERP150-0656
TEERP150-0806
TEERP150-1006
TEEPP150-0506
63mm / 2.5"
TEEPP150-0806
101mm / 4"
TEEPP150-0656
TEEPP150-1006
76mm / 3"
TEEAP065645
TEEAP080645
TEESP0656
TEESP0806
EFTPOS TEESP1006
TEEAP100645
Page 9
M
M
M
DISCOUNT
TUBE
- FOODPAGE
GRADE ASTM 1528
1010 WINE FITTINGS
POLISHED
316s/s
1011 LKB VALVES
MADE IN AUSTRALIA
1000 CLAMP FITTINGS
POLISHED
304s/s
1001 UNIONS
1002 ALL BENDS
1012 LKC-2 VALVES
1013 FLANGES
1004 REDUCERS
TUBEP0154
13mm / 1/2"
1005
19mmTEE'S
/ 3/4"
TUBEP0204
1006
32mm /INDICATION
1 1/4"
TUBEP0324
25mm / 1"
38mm / 1 1/2"
TUBEP0254
TUBEP0156
TUBEP0206
TUBEP0256
TUBEP0326
TUBEP0404
TUBEP0406
63mm / 2 1/2"
TUBEP0654
TUBEP0656
101mm / 4"
TUBEP1004
TUBEP1006
150mm / 6"
TUBEP1504
TUBEP1506
1007
51mmTUBE
/ 2" CLAMPS
TUBEP0504
1008
76mmBSP
/ 3"
TUBE
1009
125mm
/ 5"
TUBEP0804
TUBEP1254
TUBEP0506
TUBEP0806
TUBEP1256
P
se
po
304 & 316s/s
DESCALED
tube available
on request
W
fle
31
rin
S
P
C
STRUCTURAL STEEL PARTS
SQUARE SECTION TUBE
R
FLAT BAR
RECTANGULAR SECTION
TUBE
POLISHED
304s/s **
C
POLISHED
304s/s **
SOLID ROUND BAR
P
C
Size
Size
25 x 25 x 1.6
TUSQP0254
25 x 25 x 3
TUSQP025410G
Alfa Laval Complete
32 x 32 Catalogue
x 1.6
TUSQP0324
Product
32 x 32 x 3
38 x 38 x 1.6
TUSQP032410G
TUSQP0404
38 x 38 x 3
TUSQP040410G
50 x 50 x 3
TUSQP050410G
50 x 50 x 1.6
80 x 80 x 1.6
80 x 80 x 3
100 x 100 x 3
100 x 100 x 5
150 x 150 x 5
TUSQP0504
TUSQP0804
TUSQP080410G
50 x 25 x 3
60 x 40 x 3
Alfa Laval Complete
Spare Parts80 x 40 x 3
100 x 50 x 2
100 x 50 x 3
150 x 75 x 5
150 x 100 x 5
TUSQP050X025X34
TUSQP060X040X34
Alfa Laval Pump
TUSQP080X040X34
Handbook
TUSQP100X050X24
TUSQP100X050X34
Page 10
ANGULAR SECTION
TUSQP150X075X54
TUSQP150X100X54
** 316 S/S Available on request
TUSQP100410G
TUSQP10048G
TUSQP15048G
S/S NUTS & BOLTS
MCD PHE Gasket
Product Catalogue
Keofitt Product
Catalogue
GEMU Complete
Product Catalogue
304 s/s ALL THREAD ROD
DMN Westinghouse
Product Catalogue
ns
s
Matrix Process
Process Solutions
Matrix
Solutions
PIPETITE
Pre drilled holes designed to
Matrix
process
solutions is the culmination of over 50 years of processing industry experience in the form of a
self seal
around
standard
dynamic,
service
orientated company.
pop rivets
make us your ideal business partner. As the largest Alfa Laval flow distributor in Australia
, we
Rubber
is offer
pre moulded with
distribution
and
technical
support
at
your
fingertips.
White silicon rubber offers
cut lines and sizes for standard
flexibility when installed
tube sizes.
coverage,
plus
quick supply for you critical process requirements.
316 stainless
steel
support
ring
Silicon rubber FDA Certified
260°C
temperature rated.
24 hours, 7 days…
Self sealing ridge pattern
W/mK = 0.25 Thermal Conductivity
PIPETITE
Code
PT 0-35
Size (mm)
0 - 25
PT 0-95
0 - 95
PT 0-65
PT 70-125
PT 100-150
RE BOOT
Code
0 - 65
PT 317122
PT 317124
PIPE n PIPE
Code
PT 319010
NEW
70 - 135
PT 317120
PT 317123
Size (mm)
0 - 25
100 - 180
Size (mm)
0 - 65
PT 317121
PIPETITE - FLAT
Code
0 - 65
Unit
7 / 33 Meakin Rd
0 - 95
P: 07 3200 3433
70 - 135
100 - F:
18007 3200 2477
PIPETITE GROMMET
Code
PT 317130
Size (mm)
0 - 25
70 - 135
PT 317132
0 - 95
165-380
PT 317134
0 - 95
100-180
Size (mm)
100 x 0-95
8 x/70-135
36 Birralee Rd
150
PT 319011 Unit
Regency Park 5010
P: 08 8244 1322
F: 07 8244 1722
PT 317131
PT 317133
0 - 65
70 - 135
100 - 180
Pneumatic Grommet ( Bag 50 )
Code
PT 317135
PT 317136
Size (mm)
6
PT 317137
Matrix
8
10
Process
Solutions
Unit 112/ 25 Kilpa Rd
Moorabbin 3189
ANCHORS - Concrete
and Brick
P: 03 9553
0928
QTY
Code
F: 03 9553 0987
PT 317138
PT 317127
100
ANCHORS
- Concrete and Panel walls
This Catalogue is copyrighted material. All rights are reserved.
©
QTY
Codecaused to any
MPS does not accept responsibility for any loss or other damage
person or company as a result of
100
PT 317150
EFTPOS
Page 11
Page 12
80mm
BSPCA0806
BSPCA1006
TOE
NIPPLES
BSPHN0806
BSPHN1006
BSP
HOSETAIL
BSPBN0656
BSPBN0806
BSPBN1006
BSP MALE /
FEMALE BEND
2 1/2"
3"
4"
GEMU Complete
Product Catalogue
BSPTN0656
BSPTN0806
BSPTN1006
BSPEL0206MF
BSPEL0256MF
BSPEL0406MF
BSPEL0506MF
3/4"
1"
1 1/4"
1 1/2"
2"
2 1/2"
3"
4"
20mm
25mm
32mm
40mm
50mm
65mm
80mm
100mm
BSPEL0326MF
BSPEL0156MF
1/2"
15mm
BSPHT0506
BSPHT0406
BSPHT0326
BSPHT0256
BSPHT0206
BSPHT0156
Keofitt Product
Catalogue
BSPTN0506
BSPTN0406
BSPTN0326
BSPTN0256
BSPTN0206
BSPTN0156
BSPTN0106
BSPEL0106MF
3/8"
10mm
BSPHT0106
BSPTN0086
BSPHT0086
BSPEL0086MF
1/4"
Alfa Laval Pump
Handbook
8mm
BSPRB025-0106
BSPRB025-0156
BSPRB025-0206
1 - 3/8"
1 - 1/2"
1 - 3/4"
DMN Westinghouse
Product Catalogue
BSPTE1006
BSPTE0806
BSPTE0656
BSPTE0506
BSPTE0406
BSPTE0326
BSPUN1006
BSPUN0806
BSPUN0656
BSPUN0506
BSPUN0406
BSPUN0326
9611307774
9611307773
9611307772
9611307771
BSPTU0506
BSPTU0406
4 - 3"
3 - 2 1/2"
3 - 2"
2 1/2" - 2"
2 - 1 1/2"
2 - 1"
BSPTU0326
1 1/2 - 1"
BSPTU0206
BSPUN0206
1 1/2-1 1/4"
1 1/2 - 3/4"
BSPTU0156
BSPUN0156
BSPTU0256
1 1/2 - 1/2"
BSPTU0106
BSPUN0256
BSPRB025-0086
1 - 1/4"
BSPTE0256
BSPRB020-0156
3/4 - 1/2"
BSPTE0206
BSPRB020-0106
3/4 - 3/8"
BSPTE0156
BSPRB020-0086
3/4 - 1/4"
BSPUN0106
BSPRB015-0106
1/2 - 3/8"
BSPTE0106
BSPRB015-0086
1/2 - 1/4"
1 1/4 - 1"
BSP TO TUBE
ADAPTOR
BSPRB015-0066
1/2 - 1/8"
BSPUN0086
9611307770
BSP/ BSM MALE
ADAPTOR
BSPRB010-0086
3/8 - 1/4"
BSPTE0086
UNION
TEE
BSPSO1006
BSPSO0806
BSPRB010-0066
3/8 - 1/8"
1 1/4 - 3/4"
BSPEL1006
BSPPL1006
BSPRB008-0066
1/4 - 1/8"
BSPUN0066
BSPEL0806
BSPPL0806
BSPSO0656
1008 BSP
BSPTE0066
BSPEL0656
BSPPL0656
BSPSO0406
BSPSO0506
1009 TUBE
BSPTN0066
BSPEL0506
BSPPL0506
BSPSO0326
BSPRB100-0806
BSPRB080-0656
BSPRB080-0506
BSPRB065-0506
BSPRB050-0406
BSPRB050-0256
BSPRB040-0326
BSPRB040-0256
BSPRB040-0206
BSPRB040-0156
BSPRB032-0256
BSPRB032-0206
1013 FLANGES
1/8"
BSPEL0406
BSPPL0406
Size
BSPRN100-0806
BSPRN080-0656
BSPRN080-0506
BSPRN065-0506
BSPRN050-0406
BSPRN050-0256
BSPRN040-0326
BSPRN040-0256
BSPRN040-0206
BSPRN040-0156
BSPRN032-0256
BSPRN032-0156
BSPRN025-0206
BSPRN025-0156
BSPRN025-0106
BSPRN020-0156
BSPRN020-0106
BSPRN020-0086
BSPRN020-0066
BSPRN015-0106
BSPRN015-0086
BSPRN015-0066
BSPRN010-0086
BSPRN010-0066
BSPRN008-0066
1012 LKC-2 VALVES
INCH
BSPEL0326
BSPPL0326
BSPSO0256
1011 LKB VALVES
6mm
BSPEL0256
BSPPL0256
BSPSO0206
REDUCING
NIPPLES
1010 WINE FITTINGS
NB
BSPCA0656
BSPHN0656
BSPBN0506
2"
Alfa Laval Complete
Spare Parts
100mm
BSPCA0506
BSPHN0506
BSPBN0406
1 1/2"
BSPEL0206
BSPPL0206
BSPSO0156
BSPSO0106
1006 INDICATION
65mm
BSPCA0406
BSPHN0406
BSPBN0326
1 1/4"
BSPCA0206
BSPEL0156
BSPPL0156
1004 REDUCERS
50mm
BSPCA0326
BSPHN0326
BSPBN0256
1"
BSPHN0206
BSPEL0106
BSPPL0106
BSPSO0086
REDUCING
BUSH
1002 ALL BENDS
40mm
BSPBN0206
3/4"
BSPCA0156
BSPCA0106
BSPEL0086
BSPPL0086
BSPSO0066
SOCKETS
1000 CLAMP FITTINGS
32mm
BSPCA0256
BSPHN0256
BSPBN0156
BSPHN0156
BSPHN0106
BSPBN0106
3/8"
1/2"
BSPCA0086
BSPHN0086
BSPBN0086
1/4"
BSPEL0066
BSPPL0066
BSP
ELBOW
1007 TUBE CLAMPS
25mm
20mm
15mm
10mm
8mm
MCD PHE Gasket
Product Catalogue
BSPHN0066
Alfa Laval Complete
Product Catalogue
BSPBN0066
BSP BLANK
HEX PLUGS
CAP
1005 TEE'S
1/8"
INCH
HEX
NIPPLES
1001 UNIONS
6mm
NB
BARREL
NIPPLE
DISCOUNT
PAGE
SCREWED
BSP
FITTINGS
M
M
M
Matrix Process
Process Solutions
Matrix
Solutions
SERVICE'S BALL VALVES
Matrix process solutions is the culmination of over 50 years of processing industry experience in the form of a
3 PIECE BUTT WELD
3 PIECE TRI-CLAMP
1 PIECE BSPto
BALL
2 PIECE
BSP BALL
3 PIECE BSP
BALLsmart design and implementation,
process
technology
improvements
through
FOR TUBE BALL
BALL VALVE 316s/s
VALVE 316s/s WOG
VALVE 316s/s WOG
VALVE 316s/s WOG
VALVE 316s/s
make us your ideal business partner. As the largest Alfa Laval flow distributor in Australia
, we offer
24 hours, 7 days…
Size
you can
rely on
us to serve BV008V002PL
you best.
BV008V003PL
1/4"
3/8"
BV010V003PL
BV010V002PL
3/4"
BV020V003PL
BV020V002PL
1/2"
1"
BV015V003PL
BV025V003PL
1 1/4"
BV032V003PL
2"
BV050V003PL
1 1/2"
2 1/2"
BV040V003PL
3"
4"
BV015V002PL
BV025V002PL
BV032V002PL
BV008V005MT
BV008V005MBW
BV008V005MTT
BV015V005MT
BV015V005MBW
BV015V005MTT
BV032V005MT
BV065V002PL
BV065V005MT
BV010V005MTT
BV020V005MTT
BV025V005MBW
BV025V005MTT
BV032V005MTT
BV032V005MBW
BV040V005MTT
BV040V005MBW
P: 07 3200 3433 BV050V005MTT
BV050V005MBW
F: 07 3200 2477 BV065V005MTT
BV065V005MBW
BV025V005MT
BV040V005MT
BV080V002PL
BV020V005MBW
BV020V005MT
BV040V002PL
BV050V002PL
BV010V005MBW
BV010V005MT
BV050V005MT
BV080V005MBW
BV080V005MT
BV100V005MBW
BV100V005MT
BV080V005MTT
BV100V005MTT
ACTUATED BALL VALVES AVAILABLE ON REQUEST
BSPUN1006
4 - 3"
BSPRB100-0806
BSPRN100-0806
ns
s
100mm
4"
BSPTN1006
BSPTE1006
SERVICE'SNON RETURN VALVES
Regency Park 5010
P: 08 8244 1322
F: 07 8244 1722
NON
Matrix ProcessBSP
Solutions
VALVE
Unit 1 / 25RETURN
Kilpa Rd
316 s/s (SPRING)
Moorabbin 3189
P: 03 9553 0928
F: 03 9553 0987
BSP NON
RETURN VALVE
316 s/s (SWING)
Size
1/4"
MPS does not accept responsibility for any loss or other damage caused to3/8"
any person or company as a result of
BSPNRV0156
BSPSCV0156
1/2"
BSPNRV0206
BSPSCV0206
3/4"
BSPNRV0256
BSPSCV0256
1"
BSPNRV0326
BSPSCV0326
1
1/4"
BSPNRV0406
BSPSCV0406
1 1/2"
BSPNRV0506
BSPSCV0506
2" from your
Detailed product data on any products listed in this catalogue can be obtained
nearest MPS office.
2
1/2"
3"
4"
EFTPOS
Page 13
DISCOUNT PAGE
FLANGES
1000 CLAMP FITTINGS
BLIND
FLANGE
304
1001 UNIONS
s/s TABLE 'D'
BENDS
1002 ALL
INCH
NB
19mm
1003
25mm
38mm
1010 WINE FITTINGS
BLIND
BLIND
FLANGE1011
316 LKB VALVES
FLANGE 304
s/s TABLE 'D'
s/s TABLE 'E'
Code1012 LKC-2 VALVES
Code
Code
3/4"
TRI-CLOVER
SEALS
1"
FLANG0254BE
1.5"
FLANG0404BD
63.5mm
2.5"
FLANG0654BD
101mm
4"
FLANG1004BD
150mm
6"
FLANG1504BD
FLANG0256BE
FLANG0406BD
FLANG0404BE
FLANG0406BE
FLANG0656BD
FLANG0654BE
1004 REDUCERS
FLANG0504BD
51mm
2"
FLANG0506BD
1005 TEE'S
76mm
3"
FLANG0806BD
FLANG0504BE
FLANG0804BE
FLANG1006BD
1006 INDICATION
5"
FLANG1254BD
125mm
FLANG1004BE
FLANG1254BD
FLANG1254BE
FLANG1506BD
1007 TUBE
200mm
8" CLAMPS
FLANG2004BD
Code
FLANG0204BE
1013 FLANGES
FLANG0254BE
FLANG0256BE
FLANG0804BD
BLIND
FLANGE 316
s/s TABLE 'E'
FLANG2006BD
FLANG0326BE
FLANG0506BE
FLANG0656BE
FLANG0806BE
FLANG1006BE
FLANG1256BE
FLANG1504BE
FLANG1506BE
SLIP ON
FLANGE T/S
TUBE. 304s/s
TABLE E
SLIP ON
FLANGE T/S
TUBE. 316s/s
TABLE E
FLANG0154SE
FLANG0256BE
FLANG2004BE
ANSI, DIN, PN16
AND OTHER
FLANGE
STANDARDS
AVAILABLE.
FLANG2006BE
1008 BSP
1009 TUBE
NB
INCH
12mm
19mm
SLIP ON
FLANGE T/S
TUBE. 304s/s
TABLE D
Code
1/2"
3/4"
SLIP ON
FLANGE T/S
TUBE. 316s/s
TABLE D
Code
Code
FLANG0204SE
FLANG0256BE
FLANG0324SE
FLANG0326SE
25mm
1"
FLANG0254SD
FLANG0256SD
FLANG0254SE
38mm
1.5"
FLANG0404SD
FLANG0406SD
63.5mm
2.5"
FLANG0654SD
FLANG0656SD
FLANG0654SE
101mm
4"
FLANG1006SD
FLANG1004SE
AVAILABLE
32mm
1.25" PUBLICATIONS
FLANG0324SD
FLANG0326SD
51mm
76mm
125mm
150mm
200mm
2"
FLANG0504SD
3"
FLANG0804SD
5"
FLANG1254SD
FLANG1256SD
FLANG2004SD
FLANG2006SD
6"
8"
FLANG1004SD
FLANG1504SD
FLANG0404SE
FLANG0506SD
FLANG0806SD
FLANG0256SE
FLANG0406SE
FLANG0504SE
FLANG0506SE
FLANG0804SE
FLANG0806SE
FLANG1254SE
FLANG1506SD
Code
FLANG1504SE
FLANG2004SE
FLANGE
GASKETS
AVAILABLE FOR
ALL SIZES.
FLANG0656SE
FLANG1006SE
FLANG1256SE
FLANG1506SE
FLANG2006SE
MISCELLANEOUS FITTINGS
Alfa Laval Complete
HOSE
Product Catalogue
TAILS
MACHINED
Alfa Laval Complete
HOSE Spare
TAILS
Parts DOMED END
BUTT WELD
CAPS
Alfa Laval Pump
Handbook
Keofitt Product
Catalogue
DMN Westinghouse
Product Catalogue
Size
18mm / 3/4"
HOSET0206M
25mm / 1"
HOSET0256M
HOSET0256
38mm / 1.5"
HOSET0406M
HOSET0406
HOSET0656M
HOSET0656
32mm / 1.25"
HOSET0326M
51mm / 2"
HOSET0506M
76mm / 3"
HOSET0806M
63mm / 2.5"
101mm / 4"
HOSET1006M
MCD PHE Gasket
150mm
/
6"
Product Catalogue
200mm / 8"
Page 14
EC0206D
EC0256D
HOSET0326
EC0326D
HOSET0506
EC0506D
HOSET0806
EC0406D
EC0656D
EC0806D
HOSET1006
EC1006D
GEMU Complete
EC1506D
Product Catalogue
EC2006D
M
M
M
ns
s
6
R
Matrix
Process
Solutions
Matrix
Matrix Process
Process Solutions
Solutions
INSUL-SYSTEM
Insul-System
24 hours, 7 days…
P: 07 3200 3433
Insul-System is an Australian Made insulated piping system, developed specifically to F: 07 3200 2477
meet the extremes of the Australian environment. Insul-System is ideal for a multitude
of applications, suitable for both hot and cold applications, including such processes
as brine lines, Milk, Wine, Beer and beverage product lines, steam feed lines and in
fact anywhere temperature loss is costing your business money.
Insul-System is available as standard with AUSTRALIAN MADE STM (AS1528) stainless
steel cores, however this system allows for any other core medium to be used to suit
your application. External Cladding is available in galvanised or white, along with
installation kits to suit bends, tees and other process services.
A (mm)
B (mm)
Std Insulation
Thickness
Inner Tube wall
Thickness
Std Length
38.1
102
32mm
1.6
6m
50.8
102
26mm
1.6
6m
50.8 Process Solutions
127
Matrix
76.1
Regency Park 5010127
P: 08 8244 1322
76.1 F: 07 8244 1722 152
38mm
176
38mm
101
25mm
38mm
Matrix
1.6Process Solutions 6m
Moorabbin
3189
1.6
6m
P: 03 9553 0928
F: 03 9553 0987
1.6
6m
1.6
6m
Polyurethane
65kg p/m3 for any loss or other damage caused to any person or company as a result of
MPS doesInsulation
not accept: responsibility
Refrigeration
insulation:
75mmherein.
Thick
the information
contained
K Factor:.22
W/mK
MATRIX
Process Solutions
can
also site
Australia,
MPS reserves
the right to
change
anyinstall
pricesInsul-System
listed in the anywhere
catalogue in
without
prior notice.
withAll
the
ability
to
retro-install
to
your
existing
installation
if
required.
the technical information provided within this publication is provided in good faith and is correct at time of printing.
Other
Or components
visit our web include:
site for all product data sheets and associated information.
• Polyurethane Injection
• Spiral casing ( any colour)
• 9m lengths on request.
• Bend, join and tee installation kits
• Pre insulated fittings. Bends, tee’s, etc.
EFTPOS
Page 15
MatrixProcess
ProcessSolutions
Solutions
Matrix
DISCOUNT
PAGE
LKB
BUTTERFLY
VALVES
1000 CLAMP FITTINGS
LKB BUTTERFLY
1001 UNIONS
VALVE 304 s/s
EPDM
1010 WINE FITTINGS
LKB BUTTERFLY LKB-F BUTTERFLY LKB-F BUTTERFLY
VALVE 316 s/s
VALVE 304 s/s
VALVE 316 s/s
EPDM
EPDM
EPDM
VALVES
1011 LKB
1002 ALL BENDS
1012 LKC-2 VALVES
1013 FLANGES
LKB Ultrapure
316Ls/s EPDM.
0.5ra ASMI BPE
LKB Ultrapure
316Ls/s EPDM.
0.4raEP ASME BPE
9613858201
9613585207
9613858203
9613585209
1004
SizeREDUCERS
1005 TEE'S
25mm / 1"
9611444500
9611444501
9612400031
9612402731
51mm / 2"
9611444520
9611444521
9612400033
9612402733
INDICATION
1006/ 1.5"
9611444510
38mm
TUBE CLAMPS
1007/ 2.5"
9611444530
63mm
76mm / 3"
1008 BSP
101mm
/ 4"
125mm / 5"
1009 TUBE
152mm
/ 6"
9611444540
9611414550
9612075045**
9611414571
9612400032
9611444511
9611444531
9612400034
9611444541
9612400035
9611414551
9612400036
9612075046**
9611414572
9612400008**
9612402732
9613858202
9612402734
9613858204
9613858205
9612402735
9613858206
9612402736
9612402708**
9612400009**
9612402709**
9613585208
9613585210
9613585211
9613585212
SEALS: FDA & USP Class VI
** Available in Metric DN dimensions only.
BUTTERFLY VALVE HANDLES
LKB Handle 2
Position
LKB Handle 4
Position
LKB Regulating
handle 90 Deg
LKB Handle 2
Position to suit
indication unit
LKB Multi Position
handle Short
(150mm)
LKB Multi Position
handle Long
(200mm)
9612045001
9612045002
9612047401
9612047501
9612592801
9612592804
9612045101
9612045102
9612047402
9612047502
9612592802
9612047503
Alfa Laval Pump 9612592803
Handbook
9612592805
Size
25mm / 1"
38mm / 1.5"
51mm / 2"
63mm / 2.5"
76mm / 3"
9612045901
101mm
/ 4" Complete
Alfa Laval
125mm
/ 5"Catalogue
Product
150mm / 6"
9612047403
9612045902
Alfa Laval Complete
9612078201
Spare Parts
9612079101
9612592806
Keofitt
Product
Catalogue
ACTUATOR MOUNTING BRACKETS
MOUNTING
BRACKET t/s
Ø85mm Actuator
Size
25 - 63mm
9611416470
MCD PHE Gasket
76Product
- 101mmCatalogue
9611416480
150mm
9611416640
Page 16
MOUNTING
BRACKET t/s
Ø133mm Actuator
Size
100-125mm
GEMU Complete
Product 150mm
Catalogue
9612285301
9612285401ABB Motors Catalogue
DMN Westinghouse
Product Catalogue
M
M
M
ns
s
.
PE
Matrix
Process
Solutions
Matrix
Matrix Process
Process Solutions
Solutions
LKLA /-T ACTUATORS
the culmination of over 50 years of processing
industry
LKLA is
85mm
LKLA-T
85mm experience in the form of a
LKLA 85mm LKLA 85mm AIR
LKLA-T 85mm
LKLA-T 85mm
company.
Normally
Normally
/ AIR
Normally OPEN
AIR / AIR
Normally OPEN
smart design and implementation,
CLOSED to process technology improvements through
CLOSED
Size
9611416301
9611416304
9611417491
24 hours, 7 days…
9611416305
9611417492
9611416302
76mm
you101mm
can rely on
us to serve
you best.9611417493
9611416306
9611416307
25-63mm
125mm
9612194002
9612194003
9612194007
9611417502
9612194005
9612194102
9612194006
9612194103
9612194104
9612194008
9612194202
9611417500
150mm
9612194201
LKLA 133mm
Normally
CLOSED
LKLA 133mm
Normally OPEN
LKLA 133mm
AIR / AIR
101mm
9612271306
9612271307
9612271308
150mm
9612271316
9612271317
9612271318
LKLA-T 85mm
LKLA-T 133mm
LKLA-T 133mm
Meadowbrook
QLD 4131
Normally
AIR / AIR
Normally
OPEN
P: 07 3200 3433
CLOSED
F: 07 3200 2477
Size
125mm
9612271311
9612271312
9612271313
9612374906
9612374911
9612374916
9612374907
9612374908
9612374917
9612374918
9612374912
9612374913
LKB FITTED WITH KINETROL ACTUATORS
Size
Options include:
Air / Air actuators
Spring return Actuators
Positioner
FeedSolutions
back sensors
Matrix Process
25mm / 1"
38mm / 1.5"
51mm / 2"
63mm / 2.5"
76mm / 3"
Matrix Process101mm
Solutions
/ 4"
Unit 8 / 36 Birralee
150mm /Rd
6"
Regency Park 5010
P: 08 8244 1322
F: 07 8244 1722
Moorabbin 3189
P: 03 9553 0928
F: 03NON
9553 0987
RETURN
LKC-2 SANITARY
NRV 304 s/s
LKC-2 SANITARY
NRV 316 s/s
LKC-Ultra Pure NRV
316 s/s c/w Q Doc.
(3.1B) 0.8um in / out
51mm / 2"
9612220003
9612220009
9613484303
76mm / 3"
9612220005
9612220011
9613484305
VALVES
LKC-Ultra Pure NRV
316L s/s c/w Q
Doc.(3.1B) 0.5um
in/0.8um out
9613481903
SPRING
FREE Non
returnto alter or improve any technical aspect of the data contained within.
MPS reserves
the right
valves
on
Page
29
Size within this publication is provided in good faith and is correct at time of printing.
All the technical information provided
25mm / 1"
9612220007
9613481901
Detailed product data on any products listed in 9612220001
this catalogue can
be obtained from your9613484301
nearest MPS office.
38mm / 1.5"
9612220002
9612220008
9613484302
9613481902
63mm / 2.5"
101mm / 4"
9612220004
9612220006
9612220010
9612220012
9613484304
9613481904
EFTPOS 9613481905
9613484306
9613481906
Page 17
M
M
M
DISCOUNT
PAGE
SANITARY
VALVES
1000 CLAMP FITTINGS
1010 WINE FITTINGS
1001 UNIONS
1011 LKB VALVES
1002 ALL BENDS
1012 LKC-2 VALVES
1013 FLANGES
UNIQUE SSV
Standard
Plug Setup
1004 REDUCERS
Aseptic
Plug Setup
1005 TEE'S
1006 INDICATION
The New Unique Single Seat valve.
Built on a platform of over one million
SRC single seat valves in service.
1007 TUBE CLAMPS
1008 BSP
1009 TUBE
Available
in sizes;
25mm, 38mm, 51mm, 63mm, 76mm, 101mm
Complete modularity
Simple service parts.
Technical Data
Max. product pressure ( depending on valve specifications)
1000 kPa (10 bar)
Temperature range
-10C to +140C (EPDM)
Min. Product pressure
Air pressure
Full Vacuum
500 - 700 kPa (5 to 7 bar)
T
O
A
S
U
Alfa Laval Complete
Product Catalogue
Tank Outlet Valves
Alfa Laval Complete
Spare Parts
Tangential Outlet
Valves
Alfa Laval Pump
Handbook
Keofitt Product
Catalogue
Manually Operated /
Manual Regulating
Y-Body Valves
UNIQUE SSSV
1/2" & 3/4" ACTUATED SMALL SEAT VALVES
OPTIONS
Normally Open
Normally Closed
MCD PHE Gasket
Product Catalogue
Page 18
GEMU Complete
Product Catalogue
SIZE Range:
12mm - 18mm
ABB Motors ELASTOMERS:
Catalogue
DMN Westinghouse
Product Catalogue
EPDM ( std ), FPM, HNBR
ns
s
M)
bar)
Matrix Process
Process Solutions
Matrix
Solutions
UNIQUE MIXPROOF VALVES
24 hours, 7 days…
P: 07 3200 3433
F: 07 3200 2477
The Unique Mixproof Valve from Alfa Laval is the latest in Mixproof technology.
Offering complete process flexibility, built to your requirements.
Available in;
Sizes
38mm, 51mm, 63mm, 76mm, 101mm, 125mm, 150mm
Unique Features include:
Mixed Body Sizes.
i.e.: 101mm lower body / 51mm Upper body
Balanced or Un-Balanced plug
You can choose to have a balanced lower plug
You can choose to have a balanced Upper plug
You can choose to have Both Upper & Lower plugs balanced.
Or both Unbalanced.
Unitseat
8 / 36
Independent
LiftBirralee Rd
Regency
5010lift of the Lower plug only
You can choose toPark
have seat
P:
08
8244
1322
You can choose to have seat lift of the Upper plug only
F: 07 8244
1722
You can choose
to have
seat lift of both Upper & Lower plugs.
Or no seat lift at all.
Moorabbin 3189
P: 03 9553 0928
F: 03 9553 0987
Spiral
CleanTHIS PRODUCT CATALOGUE.
ABOUT
The unique Spiral clean system can be incorporated on the upper or lower plugs
It canCatalogue
also be incorporated
between
the All
plugs
in the
chamber
This
is copyrighted
material.
rights
areleakage
reserved.
©
Elastomers
Options
the information
contained herein.
EPDM,
FPM,
HNBR,
NBR
MPS reserves the right
to alter or improve any technical aspect of the data contained within.TANK OUTLET VERSION
Tube Connection
Tank Flange connection
EFTPOS
Page 19
MatrixProcess
ProcessSolutions
Solutions
Matrix
M
M
M
DISCOUNT
PAGE
® Basic
ThinkTop
1010 WINE FITTINGS
1000 CLAMP
THINKTOP
BASICFITTINGS
DIGITAL 8-30 VDC PNP/NPN
THINKTOP BASIC INTRINSICALLY SAFE
Code
# Sol Type
1001 UNIONS
9613419801
0
9613419802
1
3/2
1002 ALL BENDS
2
9613419803
3/2
Code
PNP/NPN
1011 LKB VALVES
PNP/NPN
1012 LKC-2 VALVES 9613468811
PNP/NPN
9613468801
9613468810
9613419804
3
3/2
PNP/NPN
SEALSPNP/NPN
1003 TRI-CLOVER
9613419805
5/2
1
# Sol Type
0
1
2
3/2
3/2
PNP/NPN
PNP/NPN
PNP/NPN
1013 FLANGES
II 2G EEx ia IIC T6
1004 REDUCERS
1005 TEE'S
THINKTOP BASIC AS-Interface
1006 INDICATION
Code
# Sol Type
9613484401
0
9613484403
2
3/2
9613484405
1
5/2
1007 TUBE 1CLAMPS
9613484402
3/2
1008 BSP 3
9613484404
1009 TUBE
3/2
62 Node ( Version 3.0 r1 )
29.5-31.6 VDC
ThinkTop®
THINKTOP DIGITAL 8-30 VDC PNP/NPN
Code
9612578901
9612578902
9612578903
9612578904
9612578905
9612578948
9612578949
# Sol Type
0
PNP/NPN
1
3/2
PNP/NPN
3
3/2
PNP/NPN
2
1
1,1
1,2
3/2
5/2
PNP/NPN
PNP/NPN
5/2, 3/2 PNP/NPN
5/2, 3/2 PNP/NPN
THINKTOP
ASI-INTERFACE
29.5-31.6Alfa
VDC
Alfa Laval
Complete
Laval Complete
Code
# Sol Type
Product Catalogue
9612615501
0
9612615503
2
3/2
9612615505
1
5/2
9612615502
9612615504
1
3
Spare Parts
3/2
THINKTOP
ASI-INTERFACE
29.5-31.6
VDC
Alfa Laval
Pump
Keofitt
Product
CodeHandbook
# Sol
9612615511
0
9612615512
1
3/2
9612615514
3
3/2
9612615513
3/2
9612615515
32 Node ( Version 2.1 ) 29.531.6 VDC
9612639601
9612639602
9612639603
0
2
Page 20
5/2
Code
9611993526
3/2
3/2
9612639604
3
3/2
MCD PHE Gasket
1
9612639605
Product Catalogue 5/2
1
3/2
THINKTOP IR KEYPAD
# Sol Type
1
2
Catalogue
62 Node ( Version 3.0 r1 )
29.5-31.6 VDC
THINKTOP DEVICENET 11-25 VDC
Code
Type
GEMU Complete
Product Catalogue
DMN Westinghouse
Product Catalogue
IN
ns
s
Matrix Process
Process Solutions
Matrix
Solutions
IndiTop®
Matrix
process solutions
is the
of over 50 years ofINDI
processing
industry experience
in theM12
formPlug
of a
INDI Top
8-30vDC/AC,
PNP/NPN.
2 culmination
position feedback
Top 8-30vDC/AC,
PNP or NPN.
dynamic,
service
orientated
company.
Code
Cable
Code
Cable
At MATRIX, 5m
our commitment
through 0.5m
smart
design
implementation,
9613418101
PNP/NPN to process technology improvements
9613418103
M12
Plug and
NPN
make
us
your
ideal
business
partner.
As
the
largest
Alfa
Laval
flow
distributor
in
Australia
,
we
9613418102
10m
PNP/NPN
9613418104 0.5m M12 Plug
PNP offer
24 hours, 7 days…
VALVE AUTOMATION
Bracket System complete to suit;
9611993526
SRC, SRC-LS, ARC, ARCUnit 7 / 33 Meakin Rd
SB, SMP-SC, SMP-BC, SMPMeadowbrook QLD 4131
BCA, SMP-TO, LKLA-T
P: 07 (LKB),
3200 3433
Koltek MH, SBV and
F: 07 3200 2477Unique.
To suit 12mm Sensors.
Sensors not supplied
LATERALLY MOUNTED UNIT FOR SRC, ARC VALVES
Micro Switch Inductive Prox
with 2 Switch
Switch
Type: NO/NC.
On/Off Signal. 2455 (110) VDC/VAC
Regency Park 5010
P: 08 8244 1322
F: 07 8244 1722
Size
25 - 63mm
76 - 101mm
PNP/NPN (2wire).
10-110VDC /
20-110VAC
Hall Prox
Switch
20-30VDC PNP
(grey). 15mA
9612522806
Moorabbin9612519007
3189
9612522906
P: 03 95539612519008
0928
F: 03 9553 0987
9612541907
9612541910
LATERALLY MOUNTED UNIT FOR LKLA (LKB) / HANDLE 1.1
Bracket system to suit
Micro Switch
Hall Prox
inductive prox sensors.
with 2 Switch
Switch
12mm sensors
18mm
55 (110) as a20-30
MPS does not accept responsibility
for any
loss Sensors
or other damage caused to any person24or- company
resultVDC
of
VDC/VAC
PNP (grey)
Size
Detailed product
data on any products listed in this catalogue can be obtained from your nearest MPS office.
25 - 101mm (85 Actuator)
9611417764
9611417765
Size
Or visit our web site for all product
data sheets
and associated information.
101-150mm (133 Actuator)
9611417765
9611417767
9611417768
9611417768
101-150mm (133 Actuator)
9612510702
9612510902
EFTPOS
9612510613
9612510806
Page 21
MatrixProcess
ProcessSolutions
Solutions
Matrix
DISCOUNT
LIAG
VALVESPAGE
& PRODUCT RECOVERY SYSTEMS
1000 CLAMP FITTINGS
FITTINGS
1010 WINE
2-Way
Arc Valve
1001 UNIONS
1011 LKB VALVES
Shut off �Open/Closed“
0°-90° / 0°-180°
Distributing
0°-90° / 0°-180° / 0°- 90°-180°
3-Way Arc Valve
1012 LKC-2 VALVES
BENDS
1002 ALL
LAEUFER
INTERNATIONAL
AG
1013 FLANGES
4-Way Arc Valve
1004 REDUCERS
Distributing
0°-90° / 0°-180° / 0°- 90°-180° / 0°- 90°-180°-270°
1005 TEE'S
1006 INDICATION
90°/120° Pigging Valve
1007 TUBE CLAMPS
Soft distributing / Soft turn round of the pig
0°-120° / 0°-120°-240°
1008 BSP
1009 TUBE
Manual
Actuated
Materials:
Parts in contact with product: AISI 316L (1.4404)
O-ring gaskets: EPDM, Viton®, Silicone
Shutter: Teflon® (PTFE TFM1600) - optional: glass-fiber reinforced Teflon (GL25), Tecapeek®
Surfaces:
In contact with product: Ra ≤ 0,8 µm (Ra ≤ 32µin)
Temperature:
Operating temperature: 110°C (230°F) Short-term: 140°C (284°F) - optional: up to 160°C (320°F)
Operating pressure:
Pressure behind arc: 10 bar (145 psi) - optional up to 20 bar (290,1 psi)
Pressure against
arc: 3
bar (43,5 psi)
Alfa Laval
Complete
Alfa Laval Pump
Alfa Laval Complete
Product Catalogue
Spare Parts
Option: Ra ≤ 0,4 µm EP Internal surface
Handbook
Actuators:
Various feedback control systems and actuators (pneumatic, electrical),
adaptable acc. Namur, DIN ISO 5211
Further options:
• Heated valve casing
• Leakage control of moving O-ring seal / steam barrier
• Ball-bearing supported selector shaft
• Control valve 4 - 20 mA
• 4-way version
• 90° / 120° pigging valve
• 3.1b certification.
MCD PHE Gasket
SMVProduct
PigsCatalogue
Page 22
GEMU Complete
Product Catalogue
Keofitt Product
Catalogue
DMN Westinghouse
Product Catalogue
M
M
M
ns
s
°
Matrix
Process
Solutions
Matrix
Matrix Process
Process Solutions
Solutions
LIAG VALVES & PRODUCT RECOVERY SYSTEMS
Matrix process solutions is the culmination of over 50
years
of processing
in the formARC.
of a3 Way,
ARC. 2 Way,
ARC. 3industry
Way, S/S experience
ARC.
2 Way,
S/S
ARC. 2 Way
ARC. 3 Way
company.
Actuated, Butt
Actuated, Butt
Actuated, Butt
Actuated, Butt
Manual. Butt Weld Manual. Butt Weld
Weld
Weld
Weld
Weld
At MATRIX, our commitment to process technology improvements
through
smart design and
implementation,
Size
25C52A21
25C52M21
25C53M21
24 hours, 7 days…
38C52A21
38C52M21
38C53M21
38mm / 1.5"
you51mm
can
rely on
us to serve
you best.51C52A21
51C52M21
51C53M21
/ 2"
25mm / 1"
63C52M21
63C53M21
102C52M21
102C53M21
SMV Pig without
magnet
SMV Pig with
magnet
38mm / 1.5"
38-40DV
38-40DMV
63mm / 2.5"
63-65DV
63mm / 2.5"
76mm / 3"
101mm / 4"
150mm / 6"
Size
76C52M21
152C52M21
51mm / 2"
50-51DV
76mm / 3"
76DV
101mm / 4"
76C53M21
152C53M21
50-51DMV
63-65DMV
76DMV
100-102DMV
Regency Park 5010
P: 08 8244 1322
F: 07 8244 1722
63C52A21
76C52A21
102C52A21
152C52A21
25C53A21
25C52Ab21
25C53Ab21
51C53A21
51C52Ab21
51C53Ab21
76C53A21
76C52Ab21
76C53Ab21
38C53A21
63C53A21
102C53A21
38C52Ab21
38C53Ab21
63C52Ab21
63C53Ab21
102C52Ab21
102C53Ab21
152C53A21
152C52Ab21
152C53Ab21
P: 07 3200 3433
PIGGING. 3 Way,
Way
F: PIGGING.
07 3200 32477
Actuated, Butt
Manual. Butt Weld
Size
Weld
38mm / 1.5"
38CV53M21
38CV53Ab21
63mm / 2.5"
63CV53M21
63CV53Ab21
101mm / 4"
102CV53M21
51mm / 2"
51CV53M21
76mm / 3"
76CV53M21
51CV53Ab21
76CV53Ab21
102CV53Ab21
Moorabbin 3189
P: 03 9553 0928
F: 03 9553 0987
EFTPOS
Page 23
M
M
M
DISCOUNT
PAGE VALVES
WAFER
BUTTERFLY
1010 WINE FITTINGS
316 S/S WAFER BUTTERFLY VALVES
FITTINGS
1000 CLAMP
CI WAFER
BUTTERFLY
VALVES
Code
Size
UNIONS
1001
WCI050M
50NB
65NB
WCI065M
ALL BENDS80NB
1002
WCI080M
100NB
WCI100M
TRI-CLOVER125NB
SEALS
1003
WCI125M
Code
1011 LKB VALVES
WSS050M
1012 LKC-2 VALVES
WSS080M
1013 FLANGES
WSS065M
80NB
100NB
150NB
WSS125M
150NB
WSS150M
WCI250M
250NB
WSS250M
WCI300M
300NB
WCI400M
400NB
WCI500M
500NB
WSS200M
1005 TEE'S
CI WAFER BUTTERFLY VALVES
1006
CodeINDICATIONSize
65NB
WSS100M
WCI150M
REDUCERS200NB
1004
WCI200M
Size
50NB
125NB
200NB
250NB
TUBE CLAMPS
1007
350NB
WCI350M
Actuators to suit
butterfly valves available.
BSP
1008
WCI450M
Sized on application
TUBE
1009
WCI600M
450NB
600NB
Lugged valves to suit table D, E or ANSI 150 Flanges available on request.
STAINLESS STEEL KNIFEGATE VALVES
316s/s MANUAL KNIFEGATE
316s/s A/A ACTUATED KNIFEGATE
Code
Size
KGV065SSM
65NB
KGV065SSAA
KGV100SSM
100NB
KGV100SSAA
100NB
KGV150SSM
150NB
KGV150SSAA
150NB
AVAILABLE
PUBLICATIONS
KGV050SSM
50NB
KGV080SSM
KGV125SSM
KGV200SSM
KGV250SSM
KGV300SSM
KGV350SSM
KGV400SSM
KGV450SSM
80NB
Code
KGV050SSAA
KGV080SSAA
125NB
KGV125SSAA
200NB
KGV200SSAA
300NB
KGV300SSAA
250NB
KGV250SSAA
350NB
KGV350SSAA
450NB
KGV450SSAA
KGV400SSAA
400NB
500NB
KGV500SSM
Alfa Laval Complete
KGV600SSM
Product Catalogue600NB
Alfa Laval Complete
Spare Parts
Size
50NB
65NB
80NB
125NB
200NB
250NB
300NB
350NB
400NB
450NB
KGV500SSAA
Alfa Laval Pump 500NB
600NB
KGV600SSAA
Handbook
Keofitt Product
Catalogue
FULL FLOW DIAPHRAGM VALVES
WIERLESS DIAPHRAGM VALVES ( Manual )
Code
Size
WDV0256M
25mm
WDV0506M
51mm
WDV0406M
WDV0656M
WDV0806M
WDV1006M
38mm
63mm
76mm
101mm
MCD PHE Gasket
Product Catalogue
Page 24
GEMU Complete
Product Catalogue
DMN Westinghouse
Product Catalogue
S
C
ns
s
Matrix Process
Process Solutions
Matrix
Solutions
SANITARY VALVES
SRC SINGLE SEAT VALVES
24 hours, 7 days…
Available in sizes;
25mm, 38mm, 51mm, 63mm, 76mm, 101mm, 125mm, 150mm
Unit 7 MIXPROOF
/ 33 Meakin Rd VALVES
SMP-BC
The Basic Choice in Mixproof valves.
P: 07 3200 3433
F: 07 3200 2477
SMP-BCA ASEPTIC Version
Available in;
Sizes
38mm, 51mm, 63mm, 76mm, 101mm, 125mm, 150mm
UnitBALL
8 / 36VALVE
Birralee
Rd
SBV SANITARY
MANUAL
Regency
Park
5010
Code
Size
P: 08
8244 1322
25mm
9612644001
F: 07
8244 1722
38mm
9612644002
9612644003
9612644004
9612644005
ABOUT
9612644006
51mm
63mm
THIS 76mm
PRODUCT
101mm
CATALOGUE.
SANITARY BALL VALVES
SBV SANITARYMoorabbin
BALL VALVE
ACTUATED
3189
Code
Size
P: 03 9553 0928
25mm
9612644013
F: 03
9553 0987
9612644014
38mm
9612644016
63mm
9612644015
9612644017
9612644018
51mm
76mm
101mm
SBV
SANITARY
BALL
VALVE
ACTUATED
for Thinktop
MPS does not accept responsibility for any loss or other
damage
caused
to any
person
or companyPrepared
as a result
of
Code
Size
9612644019
25mm
MPS reserves the right to alter or improve any technical aspect of
the data contained
within.
38mm
9612644020
All pictures are to be used as a guide only. Actual goods may differ
slightly from the
pictures shown.
51mm
9612644021
MPS reserves the right to change any prices listed in the catalogue
without prior notice.
63mm
9612644022
All the technical information provided within this publication is provided in good faith
76mm
9612644023
Detailed product data on any products listed in this catalogue can be obtained from
your nearest MPS office.
101mm
9612644024
Thinktop not included
EFTPOS
Page 25
M
M
M
DISCOUNT
MH
SHUTTERPAGE
VALVES
1010 WINE FITTINGS
1000 CLAMP FITTINGS
MH SHUTTER
1001
MH SHUTTER
HANDLE TO SUIT 2 HANDLE TO SUIT 3
VALVE 2 WAY ( No VALVE 3 WAY ( No
WAY MH VALVE
WAY MH VALVE
UNIONS
Handle )
Handle ) 1011 LKB VALVES
1002 ALL BENDS
1012 LKC-2 VALVES
1013 FLANGES
In
ACTUATOR
MOUNTING
BONNET
BRACKET FOR
INDICATION UNIT
C
9612495901
9612506201
L
9612496001
9612506202
9612496201
9612506203
9612480801
9612506204
9
1004
SizeREDUCERS
12mm / 1/2"
9612445016 *
9612445017 *
25mm / 1"
9612260013
9612260113
TEE'S
1005/ 3/4"
19mm
9612445026 *
INDICATION
1006/ 1.5"
38mm
9612260014
9612445023 *
9612260115
1008 BSP
101mm
/ 4"
9612260118
9612260017
9612260018
9612260116
9612260117
Size
9612482101
12.7 - 51mm
9612494601
63.5 - 76mm
9612482102 **
9612494602 **
9612436205
9612436206
9612449002
9612496101
9612436202
9612505101
9612436203
9612449001
* (1/2" & 3/4" fitted with clamp ends std )
1009 TUBE
ACTUATOR KH630 2 Pos. 90° SPRING RETURN
Code
9612436201
9612260114
51mm / 2"
9612260015
TUBE CLAMPS
1007/ 2.5"
63mm
9612260016
76mm / 3"
9612436204
ACTUATOR KH631 2 Pos. 90° AIR/AIR
Code
9612479201
12.7 - 76mm
9612480601
101mm
12.7 - 51mm
9612479203 **
63.5 - 76mm
9612480603 **
12.7 - 76mm
101mm
** Actuator to suit Indication unit
ACTUATOR KH632 2 Pos. 180° AIR/AIR
ACTUATOR KH633 3 Pos. 90° AIR/AIR/AIR
Code
Size
9612479202
12.7 - 76mm
9612480602
101mm
9612479204 **
9612480604 **
Code
9612495301
9612495701
12.7 - 76mm
Sp
Size
C
Size
12.7 - 76mm
101mm
101mm
PLUG COCK VALVES ( BSM Male Connections )
Code
9611100145
25mm / 1"
Alfa Laval Complete
9611100165
38mm / 1.5"
Product Catalogue
9611100175
9611100185
9611100195
SP
Size
51mm / 2"
Alfa Laval Complete
Spare Parts
Alfa Laval Pump
Handbook
Keofitt Product
Catalogue
63mm / 2.5"
76mm / 3"
SAMPLE VALVES
ALFA LAVAL TYPE 32 SAMPLE POINT
Code
3135000321
3135000351
Size
Type 32
Membrane
ZORZINI 390 SAMPLE TAP
Code
Size
MCD PHE Gasket
Product Catalogue
ZORZT390
3/8"
ZORZT390D
Page 26
1/2"
ALFA LAVAL TYPE 20 SAMPLE TAP
Code
Size
3135000201
3/4" BSP
U
Female
WINE LOCKABLE SAMPLE TAPS (BSP)
GEMU Complete
Product Catalogue
Code
Size
BSPSC0156LS
1/2" BSP
male
DMN Westinghouse
Product Catalogue
ns
s
R
IT
Matrix Process
Process Solutions
Matrix
Solutions
SANITARY VALVES
Matrix
process
solutions
is the culmination of over
50 years
of processing
industry experience in the form of a
Indication
Bracket
only
for LKAP
LKAP
1" SINGLE
SEAT VALVE
dynamic,
service
orientated
company.
Code
Price
Code
Size Body Posi. Elast.
At MATRIX,
our commitment to process technology
improvements
smart
design and implementation,
25mm through
20
N/C EPDM
9612498901
*
3139531319
make us your ideal business partner. As the largest
Alfa
Laval
flow
distributor
in
Australia
, we offer
3139531311 25mm
NBR
N/C
20
distribution
and
technical
support
at
your
fingertips.
N/C EPDM
3139531411 25mm
30
* does not include prox
sensors. Designed for
12mm
sensors
MATRIX
have
3139531511
25mm
30
N/C
NBR
office warehouses in three major locations,
Adelaide
Brisbane, ensuring total
N/O and
3139531611Melbourne,
EPDM
25mm
20
coverage, plus quick supply for you critical process
requirements.
N/O
3139531711
25mm
20
NBR
24 hours, 7 days…
you can rely
on us to serve you best.
Code
Size
LKSF FLOAT VALVES
9611250045
25mm / 1"
9611250046
38mm / 1.5"
9611250048
63mm / 2.5"
9611250050
90mm
9611250047
9611250049
51mm / 2"
76mm / 3"
9611250057
25 - 38mm
9611250059
76 - 90mm
9612305501
Size
Kv 7
9612305518
3135661411
Kv 60
9612305504
SPC-2 ELECTRO PNEUMATIC MODULATING VALVE (n/o)
Code
Size
Matrix
Process Solutions
38mm Kv 0.5E
Unit
8
/ 36KvBirralee
Rd
38mm
1E
9612553702
Regency
Park
5010
38mm Kv 2 E
9612553703
P:
08 8244
38mm
Kv 4 E1322
9612553704
F:
07 8244
9612553705
38mm
Kv 8 E1722
9612553701
9612553708
9612553710
ABOUT
9612553779
Code
9612305502
Kv 2 / 15
9612553706
51mm / 2"
CPM-O PRESSURE REGULATING VALVE
Kv 23
9612305503
9612305517
9611250117
Size
51 - 63mm
CPM-I PRESSURE REGULATING VALVE
Code
Code
LKUV-2 AIR RELEASE VALVE
P: 07 3200 3433
Code
Size
F: 07 3200 2477
17mm
9613426901
Splash Screen to suit LKSF
9611250058
LKBV- AIR BLOW VALVE
38mm Kv 16 E
63mm
Kv 64 L
THIS
PRODUCT
76mm Kv 75 L
CATALOGUE.
9612553780
101mmis
Kvcopyrighted
110 L
This Catalogue
Kv 23
Kv 2 / 15
Kv 9
SPC-2 ELECTRO PNEUMATIC MODULATING VALVE (n/c)
Code Matrix Process
Size Solutions
9612553714
9612553715
9612553716
9612553717
9612553718
38mm
Kv 0.5E
Unit
1 / 25
Kilpa Rd
38mm
Kv
Moorabbin1 E 3189
38mm
Kv 2 E0928
P:
03 9553
38mm Kv 4 E
F: 03 9553 0987
38mm Kv 8 E
9612553719
38mm Kv 16 E
9612553723
63mm Kv 64 L
9612553721
51mm Kv 32 L
Size
9612553782
51mm Kv 32 L
76mm Kv 75 L
101mm Kv 110 L
material. All rights are reserved. ©9612553783
UNIQUE
SSV
MANUAL
UNIQUE
SPC-1
REGULATING
MPS
reserves
theREGULATING
right to alter or VALVE
improve any technical aspect
of the data
contained
within. VALVE
Kv
value,
m3/Hr shown.
Code
Size
m3/Hr
SIZE
All pictures are to be used as a guide only. Actual goods may differ slightly from the pictures
14
9613320115
38mm
38mm
14, 16, 25, 44
9613320116
38mm
51mm
9, 30, 51, 75
44
All the technical
information
provided within this publication is provided
in good faith
73
51mm
107
63.5mm
9613320117
Detailed product data on any products listed in this catalogue can be obtained from26,
your
nearest MPS office.
63mm
106
76.1mm
9613320118
59, 101, 172
9613320119
9613320120
76mm
101mm
171
246
101.6mm
125, 164, 250
EFTPOS
Page 27
M
M
M
DISCOUNTUNITS
PAGE
FILTRATION
1010 WINE FITTINGS
LKIF-Inline filter with DS / SMS Union
FITTINGS
1000 CLAMP
LKIF-Inline
filter with
clamp ends
Code
Size
1001 UNIONS
25mm
9612025701
38mm
1002 ALL BENDS
51mm
9612025703
9612025702
holes
Code
Size
1011 LKB VALVES
9612025801
25mm
1.5mm
1.5mm
1012 LKC-2 VALVES 9612025803
51mm
1.5mm
9612025802
63mm
1.5mm
9612025704
1003 TRI-CLOVER
76mm SEALS
1.5mm
9612025705
1004 REDUCERS
LKVF-Coarse Strainer
1005
Code TEE'S Size
holes
1006 INDICATION
38mm
9612190121
1mm
1013 FLANGES
9612025804
9612025805
38mm
63mm
76mm
Code
38mm
2mm
9612190125
25mm
9612190122
51mm
1mm
9612190127
51mm
9612190124
76mm
9612190126
CLAMPS 1mm
1007 TUBE 63mm
9612190123
9612190128
1mm
9612190129
1009 TUBEStrainer
LKVF-Coarse
holes
38mm
3mm
9612192102
3mm
9612192104
25mm
3mm
9612190132
51mm
3mm
9612190133
63mm
76mm
Code
3mm
Y' Type Strainer
Size
YSTRAINER025
YSTRAINER040
YSTRAINER050
YSTRAINER065
YSTRAINER080
YSTRAINER100
Size
holes
51mm
1,2 or 3mm
38mm
63mm
76mm
1,2 or 3mm
1,2 or 3mm
1,2 or 3mm
BSP Y Type Strainer
holes
Code
Size
BSPYS0206
3/4"
51mm
1.6mm
BSPYS0256
1.6mm
BSPYS0406
100mm
2mm
9612192103
BSPYS0156
76mm
76mm
1,2 or 3mm
1.6mm
63mm
2mm
25mm
25mm
38mm
2mm
63mm
9612192101
9612192105
Code
W
2mm
LKVF-Coarse Strainer Battery
Size
9612190130
9612190134
1.5mm
holes
1mm
9612190131
1.5mm
Size
25mm
Code
1.5mm
LKVF-Coarse Strainer
9612190120
1008 BSP
holes
1.5mm
1.5mm
1.6mm
1.6mm
BSPYS0326
1.6mm
BSPYS0506
BSPYS0656
BSPYS0806
Alfa Laval Complete
Alfa Laval Complete
LKSF
SLOT STRAINER ( Wedge
Wire )
Product Catalogue
Spare Parts
LKSF-BL SLOT STRAINER
Inline Wedge Wire
holes
1/2"
1.5mm
1"
1.5mm
1.25"
1.5"
2"
2 1/2"
3"
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
1.5mm
Alfa Laval Pump
Handbook
LKSF-CL SLOT STRAINER
Keofitt Product
Catalogue
Sizes: 25,38,51,63,76 & 101mm
Inline Wedge Wire with Backflush
Standard
Element sizes
Optional Element sizes
available
77µm
53µm
177µm
88µm
105µm
63µm
841µm
1190µm
1000µm
210µm
1680µm
149µm
250µm
297µm
354µm
Page 28
595µm
125µm
2000µm
GEMU Complete
Product Catalogue
420µm
500µm
707µm
MCD PHE Gasket
Product Catalogue
E
1410µm
2380µm
3360µm
DMN Westinghouse
Product Catalogue
ns
s
Matrix Process
Process Solutions
Matrix
Solutions
SPRING FREE NON RETURN VALVES
Matrix
processVALVE
solutions is the culmination of over 50 years of processing industry experience in the form of a
EDF NON
RETURN
dynamic,
service
orientated
company.
Code
Size
At
MATRIX,
our
commitment
to process technology improvements through smart design and implementation,
W10015TT1610MME1
12mm / 1/2"
make
us
your
ideal
business
partner.
As the largest Alfa Laval flow distributor in Australia , we offer
W10020TT1610MME1
20mm / 3/4"
distribution
and
technical
support
at
your
fingertips. MATERIALS
25mm / 1"
W10025TT1610MME1
38mm / 1.5"
Body valve / Flanges: AISI304, AISI316L
W10040TT1610MME1
MATRIX have office
warehouses
in three major locations,
Melbourne,
Adelaide and Brisbane, ensuring total
51mm
/ 2"
Shutter:
DUPLEX
W10050TT1610MME1
coverage, plus quick
63mmsupply
/ 2.5" for you critical process requirements.
W10065TT1610MME1
76mm / 3"
SURFACE FINISHING
W10076TT1610MME1
101mm
/
4"
Internal / External finishing from Ra 0.4EP to Ra 3.2.
W10100TT1610MME1
24 hours, 7 days…
you can rely on us to serve you best.ELASTOMERS
WAFER NON RETURN VALVE
Code
W100151610MRE121
W100201610MRE121
W100251610MRE121
W100321610MRE121
W100401610MRE121
W100501610MRE121
W100651610MRE121
W100801610MRE121
W101001610MRE121
W101251610MRE121
W101501610MRE121
W102001610MRE121
Size
EPDM, NBR, FPM ( Viton), Silicon, FEP
DN20
TECHINAL DATA
The differential pressure required to open the valve when
installed in a vertical pipe is about 6 kPa ( 0.06bar). During
operation the pressure difference to keep open the valve is
P:)07 3200 3433
approximately 3 kPa ( 0.02 bar
F: 07 3200 2477
DN15
DN25
DN32
DN40
DN50
DN65
DN80
DN100
DN125
DN150
Pressure Max:
Temperature Max:
Temperature Min
1600kPa ( 16 Bar )
220˚C
-10˚C
DN200
DIAPHRAGM VALVES
G.S. ANDERSON®
Regency Park 5010
P: 08 8244 1322
F: 07 8244 1722
Moorabbin 3189
P: 03 9553 0928
F: 03 9553 0987
Diaphragm Code
Min
Max
Steam
S2, EPDM
-40˚C
150˚C
150˚C*
Size
8mm / 1/8"
10mm / 3/8"
15mm / 1/2"
70, FPM
Parts interchangable
-5˚C 150˚C Not recommended
20mm / 3/4"
ABOUT
THIS PRODUCT CATALOGUE.
80
,
Silicon
-40˚C 175˚C
with other brands
175˚C**
25mm / 1"
93/70, PTFE/FPM
-5˚C 175˚C
150˚C**
32mm / 1.25"
93/S2
PTFE/EPDM
-5˚C or
175˚C
150˚C**
38mm
caused
to any person
company
as a result
of/ 1.5"
LC/S2, TFM/EPDM
150˚C**
-5˚C 175˚C
51mm / 2"
63mm / 2.5"
MPS reserves the right to alter or improve any technical aspect of the data *Continuous
contained temperature
within.
** 40 min. steam sterilisation
76mm / 3"
101mm / 4"
EFTPOS
Page 29
DISCOUNT PAGE
1000 CLAMP FITTINGS
1010 WINE FITTINGS
1001 UNIONS
1011 LKB VALVES
1002 ALL BENDS
1012 LKC-2 VALVES
1013 FLANGES
1004 REDUCERS
1005 TEE'S
1006 INDICATION
Head
1007 TUBE CLAMPS
Keofitt offers you a wide range of options to customize your valve. Areas
of consideration when choosing your valve are:
Installation on the process side
1008 BSP
Inlet/ outlet connection
1009 TUBE
Membrane
Mode of operation
Body
Realizing your options using standard parts, Keofitt valves are made of a
valve body and a valve head.
Further details available at our web site. www.matrixps.com
M4 , W9
Alfa Laval Complete
Product Catalogue
Aseptic System
MCD PHE Gasket
Product Catalogue
Microport
Page 30
W 15 , W 25
Alfa Laval Complete
Spare Parts
Carlsberg Flask
GEMU Complete
Product Catalogue
Microport
Ingold Valve
Alfa Laval Pump
Handbook
Steam Boiler
360 Sampling Bag System
Sterilisation
Keofitt Product
Catalogue
Sampling
DMN Westinghouse
Product Catalogue
Reflex Double Seat Sampler
M
M
M
ns
s
s
a
Matrix Process
Process Solutions
Matrix
Solutions
SAMPLING VALVES
KEOFITT CLASSIC BODIES
KEOFITT CLASSIC HEADS
Matrix process solutions is the culmination
of
over
50
years
of
processing
industry
experience
in the formHANDLE
of a TYPE
BODY TO
BODY 'T'company.
TO
BODY
'P' TO
HANDLE TYPE HANDLE TYPE HANDLE TYPE HANDLE TYPE
dynamic,
service
orientated
SUIT TRIH (Built in
SUIT TANKS
SUIT TUBE
H
Q
N (Pneumatic) K (Key Ring)
CLAMP
Microport)
At MATRIX, our commitment to process
technology improvements through smart design and implementation,
Size
Code
Code
Code
Code
24 hours, 7 days…
850011
850001
850021
600041
W9
you can860011
rely on 860001
us to serve
you best.865541
860003
W15
400011
M4
400001
400021
Code
400043
600043
Membrane
SILICON
EPDM
PTFE
Code
Tank Welding
Code
831141
831141EPDM
831141PTFE
1/2" Clamp
Connection
Code
830141
830141EPDM
830141PTFE
832141
832141EPDM
832141PTFE
Membrane
SILICON
Tank Welding
UnitCode
8 / 36 Birralee
Rd
Code
Regency
Park
5010
900057
900056
P: 08 8244 1322
F: 07 8244 1722
Code
600044
600042
600048
SIMPLEX ACTUATED
1" Clamp
Pipe Welding Tank Welding
Connection
P: 07 3200 3433
F: 07 3200 2477
1" Clamp
Connection
Code
Code
832241
811144
832241EPDM
811144EPDM
832241PTFE
811144PTFE
Code
810144
810144EPDM
810144PTFE
Code
812144
812144EPDM
812144PTFE
REFLEX DOUBLE SEAT SAMPLE VALVE
Multiport 49
840001
Code
875544
MICROPORT VALVE
Pipe Welding
Code
865544
SIMPLEX MANUAL
Pipe Welding
Code
400044
875547
870001
W25
400041
Pipe Welding
Membrane
SILICON
EPDM
PTFE
Tank Welding
1" Clamp
Connection
Code
Code
Moorabbin
3189Code
880011
880001
P: 03 9553 0928 880021
880011E
880001E
F: 03
9553 0987880021E
885511
885501
885521
2" Clamp
Connection
Code
880003
880003E
885503
SINGLE USE SAMPLE BAGS
ABOUT THIS PRODUCT
1 1/2" CATALOGUE.
Clamp
ASEPTIC SAMPLE BAG
Connection
STERILE SAMPLE BAG
This Catalogue is copyrighted material. All rights are reserved. © W9
Mini Tri-Clamp
Mini Tri-Clamp
W9
caused to Connection
any person or company
as a result
of
Connection
Connection
Connection
VOLUMEinformation
Codeprovided within this publication is provided in good faith and is correct at time of printing.
All the technical
4
x
50mls
140050
VOLUME
4 x web
100mls
Code
Code
Code
Code
Or visit our
site for 140100
all product data sheets and
associated information.
4 x 250mls
4 x 500mls
4 x 1000mls
4 x 2000mls
140250
140500
141000
142000
500mls
1000mls
2000mls
120500
121000
122000
120500TC
110500
110500TC
122000TC
112000
EFTPOS
112000TC
121000TC
111000
111000TC
Page 31
M
M
M
DISCOUNT
PAGE
TANK
CLEANING
EQUIPMENT
1000 CLAMP FITTINGS
1010 WINE FITTINGS
1001 UNIONS
1011 LKB VALVES
LKRK STATIC SPRAY BALLS
Dia 64mm for 25mm tube with 2mm holes
1002
m3/hr
Type
Code ALL BENDS
7.5
2B
9611710851
1003 TRI-CLOVER
9611710861
8.5 SEALS
2T
9611710871
11
1004 REDUCERS
T
1012 LKC-2 VALVES Code
m3/hr
Type
1013 FLANGES
2F
9611710951
18
2B
9611710971
31
2F
9611710961
21
2T
1005 TEE'S
1006 INDICATION
1007 TUBE CLAMPS
Code
m3/hr
9611710962
44
9611710952
42
9611710972
64
Type
1.8
2.9
m3/hr
wetting radius
2
2.8
M
Pressure
Impact radius
Patterns
2
0.25
2
0.75
3T
I
T
Bar
w
M
I
Toftejorg MultiMidget 1"
Min
Max
Units
Flow Rate
2.2
6.5
m3/hr
Flow Rate
2.5
wetting radius
2.5
3
M
wetting radius
2.4
Pressure
Impact radius
Patterns
2
0.85
2
1.4
Bar
M
360˚, 270˚ up, 180˚
Toftejorg SaniMidget SB Ultrapure / 3A
Min
Flow
Rate
3.5
Alfa
Laval Complete
1
Pressure
Product Catalogue
wetting radius
Impact radius
Patterns
2.8
1.25
270˚ up
Toftejorg MultiMagnum
Flow Rate
Pressure
wetting radius
Impact radius
Patterns
9
3
3
1.4
m3/hr
Alfa Laval Complete
Bar
Spare Parts
M
M
Impact radius
Patterns
5
18
m3/hr
2.8
3
M
3
2.01
Bar
M
360˚, 270˚ up, 180˚
OPTIONS
GEMU Complete
3.1B Certification
Product Catalogue
0.5um RA Electropolished
Hastelloy C22
Zone 0/20
T
Max
Units
7
m3/hr
1
3
0.9
1.45
Bar
3
M
M
Min
Max
Units
4.2
FlowAlfa
Rate
Laval Pump
Pressure
Handbook 2
9.8
1.1
1.6
m3/hr
Keofitt Product
BarCatalogue
M
Impact radius
Patterns
3
270˚ up
2
5
3.5
5
M
Bar
Min
Max
Units
Flow Rate
7
18
m3/hr
wetting radius
2.2
3
M
Pressure
Impact radius
Patterns
I
T
Toftejorg SaniMidget Retractable
wetting radius
w
360˚, 270˚ up, 180˚
Toftejorg SaniMagnum
Units
1.8
Pressure
Air Supply
Max
1
Min
Units
Min
MCD PHE Gasket
Product Catalogue
Page 32
Max
T
w
3F
360˚, 270˚ up, 270˚ up lf, 180˚ down
Toftejorg SaniMidget 1"
I
3B
CLEANING EQUIPMENT
1008 BSP
Toftejorg Sanimicro
1009 TUBE Min
Max
Units
Flow Rate
w
1
1.3
3
2
Bar
M
360˚, 270˚ up, 180˚
Toftejorg Rotacheck sensor
DMN Westinghouse
Product Catalogue
w
I
T
w
I
T
w
I
ns
s
Matrix Process
Process Solutions
Matrix
Solutions
TANK CLEANING EQUIPMENT
CLEANING EQUIPMENT
Matrix
process solutions is the culmination of over 50 years ofToftejorg
processing
industry
experience
Toftejorg
SaniMega
TZ-89
Rotary
Jet Headin the form of a
dynamic, service
orientated
company.
Min
Max
Min
Max
Units
Units
At
MATRIX,
our
commitment
to
process
technology
improvements
through
smart
design
1.1
4and implementation,
m3/hr
21
28
m3/hr
Flow Rate
Flow Rate
make us your
partner. As the largest Alfa Laval flow
distributor in
4
Bar
Bar
2 Australia7 , we offer
Pressure
Pressure
2 ideal business
distribution
and
technical
support
at
your
fingertips.
4
7
wetting radius
M
M
wetting radius
1.8
Impact radius
3
MATRIX
have
Patterns
270˚
up
M
Impact radius
1
4
M
office warehouses in three major locations, Melbourne,
360˚ and Brisbane, ensuring total
PatternsAdelaide
Toftejorg
20.7Media
or Air Driven
24 SaniJet
hours,
days…
Min
Max
you can1 rely on
us m3/hr
to serve you best.
9.5
Flow Rate
Pressure
5
Impact radius
1.5
wetting radius
Patterns
8
Bar
4
M
4.5
M
360˚
Air Supply
7
7
Toftejorg TJ 20G Rotary Jet Head
Units
Bar
Toftejorg SaniJet 25 Rotary Jet Head ( EHEDG )
Min
Max
Units
5
15
m3/hr
9
14
Flow Rate
Pressure
3
Impact radius
4
wetting radius
8
Bar
M
8
M
P: 07 3200
3433 Jet Head
Toftejorg TZ-74 Self cleaning
Rotary
F:
07
3200
2477
Max
Min
Units
Patterns
360˚
Min
Max
Units
Flow Rate
5
15
m3/hr
Flow Rate
12
36
m3/hr
wetting radius
9
14
M
wetting radius
7
15
M
Pressure
3
Impact radius
Patterns
8
4
8
Bar
M
360˚
Toftejorg MultiJet 40
Pressure
3
Impact radius
Patterns
4
12
Bar
9
M
360˚
Toftejorg TZ-67 Portable
Min
Max
Units
Min
Max
Units
Flow Rate
10
30
m3/hr
Flow Rate
10
32
m3/hr
wetting radius
8
17
M
wetting radius
7
17
M
Pressure
Impact radius
Patterns
3
12
4
10
Bar
M
360˚
Toftejorg TZ-82P - Portable
Max
Units
8
23
m3/hr
Min
Max
Units
Matrix5 Process12Solutions
Bar
RdM
wetting radius Unit
218 / 36 Birralee
32
Impact radius Regency Park 5010M
Patterns
360˚ P: 08 8244 1322
F: 07 8244 1722
Toftejorg TZ-66
Pressure
Flow ABOUT
Rate
Pressure
18
THIS
2
50
PRODUCT
wetting This
radiusCatalogue
9
12
3
Impact radius
Patterns
4
m3/hr
CATALOGUE.
Bar
12
Bar
10
M
360˚
Toftejorg TZ-79
Min
Flow Rate
Pressure
Min
Max
Units
Flow Rate
m3/hr
Matrix18Process50Solutions
Pressure
3 1 / 25 Kilpa
12
Unit
RdBar
wetting radius
9
263189 M
Moorabbin
Impact radius
5
P: 03 9553140928 M
Patterns
360˚
F: 03 9553 0987
Toftejorg TZ-75 Portable
Min
Max
Units
18
48
m3/hr
Flow Rate
Pressure
2
12
21
31
Bar
29
Mmaterial. All rights are reserved.wetting
9
29
M
is copyrighted
© radius
Impact MPS
radius does 5
M
Impact
radius to any
5 person or
15 company
M as a result of
not accept15responsibility
for any loss or other damage
caused
360˚
Patterns
360˚
Patterns
the information
contained herein.
Toftejorg
TZ-750 Portable
T-82from
Gunthe
Clean
All pictures
are to be used as a guide only. Actual goods mayToftejorg
differ slightly
pictures shown.
Min
Min
Max
Units
Units
MPS reserves the right to change any prices listed in the catalogue without prior notice.Max
Flow All
Ratethe technical
Flow
Rate
38
m3/hr
7
25
m3/hr
83
information provided within this publication is provided in good faith and is correct at time of printing.
Pressure
5
Pressure
Detailed product
data12on anyBar
products listed in this catalogue can
be obtained 5from your12
nearestBar
MPS office.
wetting Or
radius
30
40
M
wetting
radius
40
M
visit our web site for all product data sheets and associated information.
Impact radius
Patterns
M
360˚
Impact radius
Patterns
360˚
M
EFTPOS
Page 33
DISCOUNT
PAGE
TANK
ACCESSORIES
1000 CLAMP FITTINGS
1010 WINE FITTINGS
1001 UNIONS
1011 LKB VALVES
1002 ALL BENDS
1012 LKC-2 VALVES
1013 FLANGES
1004 REDUCERS
RELIEF VALVE RV 130
1005 TEE'S
MODEL: A10
1006 INDICATION
130hl/hr
1 1/4" connection
1007 TUBE CLAMPS
Tank Legs
Tank Sightglasses
Halogen Light assemblies
RELIEF VALVE RV 400 & 400A
RELIEF VALVE RV 800
MODEL: A20
400hl/hr
1 1/4" connection
1 1/2" connection
MODEL: A30
800hl/hr
2" connection
1008 BSP
1009 TUBE
RELIEF VALVE RV 600
Type
A-40
A-40
Flow
Seal
In
300 hl/hr
Oil
60mm
600 hl/hr
Oil
RELIEF VALVE RV 1000
Type
Flow
A-60 1000 hl/hr
60mm
A-60 1000 hl/hr
Seal
In
Oil
60mm
Oil
60mm
PRESSURE RELIEF VALVES
Adjustable PRV
Alfa Laval Complete
Product Catalogue
Adjustable PRV c/w Adjustable PRV c/w
Manual Override Pneumatic Override
Alfa Laval Complete
Spare Parts
Alfa Laval Pump
Handbook
Keofitt Product
Catalogue
Size
12mm
18mm
25mm
PRV012
PRV018
PRV025
PRV025MO
PRV025PO
PRV050
PRV050MO
PRV050PO
38mm
PRV040
63mm
PRV065
51mm
76mm
PRV080
101mm
PRV100
MCD PHE Gasket
Product Catalogue
Page 34
PRV040MO
PRV065MO
PRV080MO
PRV040PO
PRV065PO
PRV080PO
PRV100MO
PRV100PO
GEMU Complete
Product Catalogue
PRV in use to protect Pump
overpressure
DMN Westinghouse
Product Catalogue
M
M
M
ns
s
Matrix Process
Process Solutions
Matrix
Solutions
TANK ACCESS COVERS
make
us your ideal business partner. As the largest Alfa Laval flow distributor in Australia , we offer
OVAL DOORS
distribution
and technical
support at your fingertips.
SIZES
MATERIALS
ELASTOMERS
PRESSURES
440 x 320 mm
304 s/s
EPDM
UPTO 2.5 Bar
have office warehouses
locations, Melbourne, Adelaide and Brisbane, ensuring total
535MATRIX
x 435 mm
316L s/s in three majorSILICON
requirements.
546coverage,
x 447 mmplus quick supply for you critical process
NITRILE
VITON
24 hours, 7 days…
ROUND DOORS
SIZES
202 mm
306 mm
404 mm
418 mm
454 mm
508mm
516 mm
608 mm
620 mm
MATERIALS
304 s/s
316L s/s
Regency
Park 5010
RECTANGULAR
DOORS
P:
08
8244
1322
ROUND DOORS
F: 07 8244 1722
SIZES
MATERIALS
184 x 234 mm
304 s/s
332 x 440 mm
316L s/s
432ABOUT
x 555 mm
THIS PRODUCT CATALOGUE.
ELASTOMERS
EPDM
SILICON
NITRILE
VITON
P: 07 3200 3433
PRESSURES
F: 07 3200 2477
UPTO 14.7 Bar
Moorabbin 3189
P: 03 9553 0928
F: 03 9553 0987
PRESSURES
UPTO 1.0 Bar
ELASTOMERS
EPDM
SILICON
NITRILE
VITON
EFTPOS
Page 35
DISCOUNT
PAGE
INLINE
SIGHTGLASS
H
1010 WINE FITTINGS
LKGG-1 Inline Sightglass - 316s/s
CLAMP
FITTINGS - 304s/s
1000 Inline
LKGG-1
Sightglass
Code
Size
1001 UNIONS 25mm
9612141401
9612141402
1011 LKB VALVES
38mm
9612141404
63mm
SEALS
1003 TRI-CLOVER76mm
9612141405
1013 FLANGES
101mm
1004 REDUCERS
LKGL-1 INLINE SIGHTGLASS WITH LIGHT
1005 TEE'S Size
Code
25mm
1006 INDICATION
38mm
9612141406
9612141407
9612141408
9612141409
9612141410
9612141412
9611940001
9611940003
1007 TUBE CLAMPS
63mm
9611940004
76mm
9611940005
101mm
G
Size
25mm
38mm
51mm
63mm
76mm
101mm
LKFL INLINE SIGHTGLASS ( Option with light )
Code
9611940002
51mm
1008 BSP
Code
1012 LKC-2 VALVES
1002 ALL BENDS51mm
9612141403
9612141411
M
M
M
Size
38mm
51mm
63mm
76mm
101mm
1009 TUBE
T
POLYSIGHT
STANDARD DESIGN:
•Tri-Clamp connections
•Polysulfone Lens
•10 Bar pressure rating
•130 Deg C Max Internal Temperature. (Ambient external)
•EPDM Elastomers standard.
•304 s/s or 316 s/s
•FDA, USDA and 3-A Dairy compliant
•Predrilled for quick and easy installation
Alfause
Laval
Complete
Complete
•Indoor
only.
Not suitable for high Alfa
UV Laval
levels.
( Outdoors )
Product Catalogue
Spare Parts
MCD PHE Gasket
Product Catalogue
GEMU Complete
Product Catalogue
Page 36
POLYSIGHT - Polysulfone Lens. 316 s/s
Code
PSK0256
PSK0406
PSK0506
PSK0656
Size
25mm
38mm
51mm
63mm
PSK0806
Alfa Laval Pump 76mm
101mm
PSK1006
Handbook
Keofitt Product
Catalogue
DMN Westinghouse
Product Catalogue
B
ns
s
Matrix Process
Process Solutions
Matrix
Solutions
HEAT EXCHANGERS
Gasketted
Plate Heat Exchangers
24 hours, 7 days…
P: 07 3200 3433
F: 07 3200 2477
Tubular Heat Exchangers
Brazed Plate Heat Exchangers
Regency Park 5010
P: 08 8244 1322
F: 07 8244 1722
Scraped Surface Heat Exchangers
Moorabbin 3189
Fusion-bonded
P: 03 9553Plate
0928 Heat Exchangers
F: 03 9553 0987
EFTPOS
Page 37
DISCOUNT PAGE
ALL BRANDS HEAT EXCHANGER GASKETS
1000 CLAMP FITTINGS
1010 WINE FITTINGS
1001 UNIONS
1011 LKB VALVES
1002 ALL BENDS
1012 LKC-2 VALVES
1013 FLANGES
1004 REDUCERS
1005 TEE'S
For more than 35 years MCD has been manufacturing plate heat exchanger
1006 INDICATION gaskets for the following makes: APV, AGC, Alfa Laval, Arsopi, Barriquand,
Cetetherm, Ciat, Cipriani, Fischer, Fiorini, GEA, Hisaka, Mueller, Pasilac, Reheat,
1007 TUBE CLAMPSAPI Schmidt Bretten, Silkeborg, Sondex, Swep, Tranter, Vicarb etc...
1008 BSP
1009 TUBE
From the origin of MCD , the manufacturing of gaskets has been fully mastered
internally.
Whatever the gasket, this guarantees to the customer the full traceability
throughout the different steps of the manufacturing and quality control.
MAJOR BRANDS OFFERED
Alfa Laval
APV
manual preparation of the raw material
APV - Pasilac
Barriquand
Corblin
Fischer
GEA Ahlborn
Hisaka
Nagema
Reheat
compression moulding
Schnidt
Silkeborg
Alfa Laval Complete
Alfa Laval Complete
Alfa Laval Pump
Keofitt Product
Sondex
Product Catalogue
Spare Parts
Handbook
Catalogue
Sordi
Stork
Tetra Pak
Tranter
manual trimming
Vicarb
38
MCD PHE Gasket
Product Catalogue
individual quality control of
each gasket
Page 38
GEMU Complete
Product Catalogue
DMN Westinghouse
Product Catalogue
M
M
M
ns
s
Matrix Process
Process Solutions
Matrix
Solutions
24 hours, 7 days…
P: 07 3200 3433
F: 07 3200 2477
Regency Park 5010
P: 08 8244 1322
F: 07 8244 1722
Moorabbin 3189
P: 03 9553 0928
F: 03 9553 0987
EFTPOS
Page 39
DISCOUNT
PAGEAND MIXERS
TANK
AGITATORS
1000 CLAMP FITTINGS
1010 WINE FITTINGS
1001 UNIONS
1011 LKB VALVES
Side Mounted Agitators
ALS Side Mounted Agitator
1002 ALL BENDS
MATERIALS
TRI-CLOVER SEALS
1003
316L
s/s Standard
304 s/s
1004 REDUCERS
904L
SAF 2205
TEE'S on request
1005
Other
materials
1012 LKC-2 VALVES
ELASTOMERS
1013 FLANGES
EPDM
FPM/FEP
Other materials on request
PROPELLER
DIA: Ø125mm upto Ø1900mm
INDICATION
1006
3.1b Material certification available.
1007 TUBE CLAMPS
Top
Mounted
Agitators
BSP
1008
TUBE
ALT1009
/ ALTB,
TOP Mounted Agitators
ELASTOMERS
MATERIALS
EPDM
316L s/s Standard
304 s/s
FPM/FEP
904L
SAF 2205
AVAILABLE
PROPELLER
Other materials on PUBLICATIONS
request
Alfa Laval Complete
Product Catalogue
Alfa Laval Complete
Spare Parts
Alfa Laval Pump
Handbook
Keofitt Product
Catalogue
DMN Westinghouse
Product Catalogue
Bottom Mounted Agitators
ALB Bottom Mounted Agitators
MATERIALS
316L s/s Standard
304 s/s
904L
SAF 2205
ELASTOMERS
EPDM
FPM/FEP
PROPELLER
MCD PHE Gasket
Product Catalogue
Page 40
GEMU Complete
Product Catalogue
M
M
M
ns
s
Matrix Process
Process Solutions
Matrix
Solutions
TANK AGITATORS AND MIXERS
24 hours, 7 days…
Superior Mixing
No Mechanical seals
Lower operating costs
Integrated tank cleaning solution
Increased production capacity
P:Retrofit
07 3200 3433
Simple
F:
07
3200 /2477
Blending Liquids
Gases / Powders
MAG Mixer Technology
Magnetic Mixing Technology
Matrix
Process
Solutions
Patented
Levitated
(Floating)
Impeller
8 / 36coupling
Birraleekeep
Rd the impeller levitated
Strong Unit
magnetic
Moorabbin 3189
Regency
Park as
5010
at all times
at stand-still
well as in motion
P: 03 9553 0928
P: 08Contact
8244 1322
No Axial
Between Stator and Rotor
F: 03 9553 0987
F: 07 8244 1722
No friction
No bearing wear
No particle generation
Low
shear
ABOUT
THIS
PRODUCT CATALOGUE.
Can run dry
Achieve high
RPM
This Catalogue
is copyrighted
material. All rights are reserved. ©
EFTPOS
Page 41
DISCOUNT PAGE
1000 CLAMP FITTINGS
1010 WINE FITTINGS
1001 UNIONS
1011 LKB VALVES
1002 ALL BENDS
1012 LKC-2 VALVES
1013 FLANGES
1004 REDUCERS
1005 TEE'S
1006 INDICATION
1007 TUBE CLAMPS
1008 BSP
1009 TUBE
Spare parts and installation manuals
Contact your nearest Matrix office or
Visit our web site at
www.matrixps.com
Alfa Laval Complete
Product Catalogue
Alfa Laval Complete
Spare Parts
Alfa Laval Pump
Handbook
Keofitt Product
Catalogue
MCD PHE Gasket
Product Catalogue
GEMU Complete
Product Catalogue
DMN Westinghouse
Product Catalogue
Page 42
M
M
M
ns
s
Matrix Process
Process Solutions
Matrix
Solutions
MTO SERIES PUMPS
FOR WINE PUMPOVER APPLICATIONS
make us your ideal business partner. As the largest Alfa Laval flow distributor
in Australia
, weof
offer
The MTO
series range
centrifugal pumps is
designed for a wide range of applications
where sanitary stainless steel wetted
MATRIX have office warehouses in three major locations, Melbourne, Adelaide
and are
Brisbane,
ensuring
total hygienic
components
essential
to maintain
processing standards.
24 hours, 7 days…
MTO Pumps in operation
at a winery
ls
Optional trolley mounted
pump.
or
at
m
The pump is ideally suited to applications in
the wine industry. With a special clean
sweeping impeller blade design, and large
clearances it is typically used where products
may contain a high degree of solids or preUnit 7 / 33 Meakin Rd
processing foreign particles.
P: 07 3200 3433
F: 07 3200 2477
m
Moorabbin 3189
P: 03 9553 0928
F: 03 9553 0987
Regency Park 5010
P: 08 8244 1322
20
F: 07 8244 1722
25
15
4410
12does
MPS
not accept responsibility
for any loss or other damage caused to any person or company as a result of
218
328
MPS
8 reserves the right to alter or improve any technical aspect of the data contained within.
216 the right to change any prices listed in the catalogue without prior notice.
MPS reserves
5
114web site for all product data sheets and associated information.
Or visit our
0
20
45
50
80
90
100
125
150
175
200
215
225 m3/Hr
EFTPOS
Page 43
M
M
M
DISCOUNT
PAGE
PROCESS
PUMPS
1010 WINE FITTINGS
1000
GM-1A
& GM-2A
CLAMP FITTINGS
1001 UNIONS
1011 LKB VALVES
1002 ALL BENDS
1012 LKC-2 VALVES
1013 FLANGES
GM & FM-OS are basic centrifugal pump
models for simple applications at low capacities,
which secure a cost-effective solution.
1004 REDUCERS
1005 TEE'S
1006 INDICATION
FM-OS
1007 TUBE CLAMPS
1008 BSP
1009 TUBE
M
MR LIQUID RING PUMPS
Alfa Laval Complete
Product Catalogue
Alfa Laval Complete
Spare Parts
MCD PHE Gasket
Product Catalogue
GEMU Complete
Product Catalogue
Page 44
The MR liquid ring models are widely used to pump liquids
containing gases. The liquid ring is self-priming when at least
half filled with liquid. So it is capable of pumping from a suction
line partly filled with
air. Pump
Alfa Laval
Keofitt Product
Because they are self
priming, they serve as idealCatalogue
return
Handbook
pumps in CIP systems
DMN Westinghouse
Product Catalogue
ns
s
es,
Matrix Process
Process Solutions
Matrix
Solutions
PROCESS PUMPS
LKH CENTRIFUGAL PUMPS
24 hours, 7 days…
Gentle product treatment
CIP Design
Low Power consumption
Low NPSHr
Low Noise
P: 07 3200 3433 EHEDG Compliant
F: 07 3200 2477
3A authorised
Easy conversion from single to flushed shaft seal or
double mechanical shaft seal
LKH-ULTRAPURE
LKHPF - HIGH PRESSURE
LKH MULTISTAGE
Meets specifications for high-purity-water (HPW)
For demanding high pressure applications
For high outlet pressures, eg. In breweries
and water for injection (WFI)
such as reverse osmosis mono-filtration
reverse osmosis and ultra-filtration
Regency Park 5010
P: 08 8244 1322
F: 07 8244 1722
Moorabbin 3189
P: 03 9553 0928
F: 03 9553 0987
EFTPOS
Page 45
M
M
M
DISCOUNT PAGE
ROTARY LOBE PUMPS
1000 CLAMP FITTINGS
1010 WINE FITTINGS
1001 UNIONS
1011 LKB VALVES
1002 ALL BENDS
1012 LKC-2 VALVES
1013 FLANGES
SS
ap
pr
Th
Th
•F
•D
•P
1004 REDUCERS
1005 TEE'S
The SSP range of rotary lobe pumps is one of the most comprehensive on the market today, providing
1006 INDICATION
the optimum solution for a wide variety of applications with flow rates up to 680m3/h and differential
pressures
up to 20 bar. The portfolios comprises of the stainless Series S, X, L and N, together ductile
1007 TUBE CLAMPS
iron Series D, and the engine to order Series A and G rotary lobe pumps.
1008 BSP
S SERIES
1009 TUBE
SSP Series S stainless steel rotary lobe pumps fulfil a
wide range of application requirements throughout
Chemical, Food, Pharmaceutical and other related
industries.
The Series S pump range has twelve pump head
displacements ranging from
0.053 litres/rev to 3.53 litres/rev.
• Flow rates up to 106 m3/h
• Differential pressures up to 20 bar
• Port sizes from 25 mm to 150 mm diameter
Se
pu
Se
Se
•F
•D
•P
L SERIES
MCD PHE Gasket
Product Catalogue
Page 46
SSP Series X stainless steel rotary lobe pumps are used throughout industrial
and clean processes worldwide. Series X pumps are EHEDG accredited
(European Hygienic Equipment Design Group) for the highest level of
cleanability.
The Series X pump range has fourteen pump head displacements ranging
from 0.05 litres/rev to 3.80 litres/rev.
SSP Series
L stainless
steel rotary lobe pumps provide
the simple
Alfa Laval
Complete
Alfa Laval
Pump solution to
many processes,
fulfilling a wide range of applicationHandbook
requirements throughout
Spare Parts
various industries worldwide.
Series L pumps are EHEDG accredited (European Hygienic Equipment Design
Group) for the highest level of cleanability.
The Series L pump range has six pump head displacements ranging from 0.17
litres/rev to 0.82 litres/rev.
M SERIES
X SERIES
SSP Series M stainless steel gear pumps have been designed for low volume
fluid transfer duties for application areas such as filling machines, dosing and
sampling, throughout Chemical, Food, Pharmaceutical and other related
industries.
Stainless steel and PTFE components combined in a traditional gear pump
construction provide easy cleaning and simple maintenance.
The Series M pump range has three pump head sizes.
• Flow rates
upComplete
to 1500 l/h
GEMU
• Differential
pressures
up to 7 bar
Product
Catalogue
Alfa Laval Complete
Product Catalogue
SS
st
Ch
Se
wa
Di
Th
•F
•D
•P
Keofitt Product
Catalogue
SS
m
SS
Ot
ind
m
Sl
SS
du
sh
sp
tra
of
Fl
Di
Sl
Su
DMN Westinghouse
Product Catalogue
Matrix Process
Process Solutions
Matrix
Solutions
ROTARY LOBE PUMPS
The Series N pump, being small in size, is ideal for installations where space is restricted..
The Series N pump range has two pump head displacements, 2.05 litres/100 rev and 3.86 litres/100 rev.
MATRIX
have
• Flow rates
up to 2300
l/h office warehouses in three major locations, Melbourne, Adelaide
• Differential
pressures
up toquick
7 bar supply for you critical process requirements.
coverage,
plus
• Port sizes from 1/4 in (6 mm) to 1 in (25 mm) diameter
N SERIES
At MATRIX,
our commitment
to have
process
improvements
through
SSP Series
N stainless steel
rotary lobe pumps
been technology
designed for low
volume fluid transfer
dutiessmart
within design and implementation,
application
areasus
such
as laboratories,
pilot plants,
chemical
processing,
electroplating
make
your
ideal business
partner.
As the
largest food
Alfaprocessing,
Laval flow
distributorand
in film
Australia , we offer
processing.
and Brisbane, ensuring total
24 hours, 7 days…
Series A & G rotary lobe pumps are designed for high volume fluid transfer and are amongst the worlds largest
pumps of their type.
Series A is manufactured from Stainless steel. Series G is manufactured from Ductile Iron.
Both
Series A & G pump ranges have five pump head displacements ranging from 660L/100revs to 2727 L/100revs
• Flow rates up to 680 m3/hr
• Differential pressures up to 10 Bar
A & G SERIES
D SERIES
SSP Series D ductile iron rotary lobe pumps fulfil positive transfer duties throughout industry where the use of
stainless steel for pumphead components is not essential, within application areas such as Petrochemicals,
Chemical, Paper, Paints and Polymers, Petfood, Chocolate and Sugar.
Series D pumps also cover a wide span of sludge transfer duties throughout the environmental and industrial
waste treatment processes. Transfer duties include Primary, Secondary and Humus Desludging, Thickener, Unit 7 / 33 Meakin Rd
Digester and Filter press Feed and Tanker loading.
The Series D pump range has nine pump head displacements ranging from 0.79 litres/rev to 6.00 litres/rev.
P: 07 3200 3433
• Flow rates up to 180 m3/h (up to 126 m3/h on sludge)
F: 07 3200 2477
• Differential pressures up to 15 bar (up to 5 bar on sludge)
Regency Park 5010
P: 08 8244 1322
F: 07 8244 1722
SINGLE DISC
SSP Single Disc pumps are designed for use within effluent processes for pumping sludges and other waste
media having entrained solids.
SSP Single Disc pumps are ideal for primary tank manual and auto de-sludging duties.
Other applications include digested and humus sludge, raw sewage, abattoir and poultry wastes, and
other Process Solutions
Matrix
Process Solutions
industrial wasteMatrix
products.
Flow rates up to 24
m/hr
Differential pressures up to 1.5 bar
Moorabbin 3189
Sludge thickness content up to 6%
P: 03 9553 0928
F: 03 9553 0987
SSP Dual Disc pumps are designed for use within ef fluent and industrial treatment processes where arduous
duties in harsh conditions exist. The Dual Disc design with its cost ef fective easy maintenance eliminates the
shaft sealing and valve problems inherent in other pump types on arduous duties. Where dry running and high
spares costs are known problems with other pump technologies, such as Progressing Cavity pumps which are
traditionally used on lift applications, the use
ThisDisc
Catalogue
copyrighted
material.
All rights
of SSP Dual
pumps canisresult
in a reduced
lifecycle cost
(LCC). are reserved. ©
Flow rates
up todoes
52 m3/h
MPS
not accept responsibility for any loss or other damage caused to any person or company
Differential
up to 3contained
bar
thepressures
information
herein.
Sludge thickness content up to 10%
Suction lift up to 6 metres max.
DUAL DISC
ns
s
as a result of
EFTPOS
Page 47
DISCOUNT PAGE
AIR OPERATED DOUBLE DIAPHRAGM PUMPS
1000 CLAMP FITTINGS
Advantages
1010 WINE FITTINGS
1001
EASY
TO UNIONS
CLEAN
Does not need lubrication
1002 ALL BENDS
Pneumatic
No mechanical seals
TRI-CLOVER
SEALS
1003
Ability
to run
dry
Stainless Steel Construction
1004 REDUCERS
Applications
1005 TEE'S
Chicken Necks
1006 INDICATION
Hearts
Livers
TUBE CLAMPS
1007
Blood
Slurries
Feet and Paws
BSP
1008Cheese
Cottage
Yogurt
1009 TUBE
Ketchup
Cosmetics
Pharmaceuticals
Tomato Paste
Peanut Butter
Mayonnaise
Jellies
AVAILABLE
PUBLICATIONS
Cosmetics
Vaseline
Tomato Paste Concentrate
Chocolate and Vanilla Fudge
Fruit Concentrates
Other viscous products
1011 LKB VALVES
1012 LKC-2 VALVES
1013 FLANGES
G
M
A
FDA AOD Pump
AB-72 unloader
Page 48
T
M
in
pa
so
M
M
pr
W
M
Alfa Laval Complete
Spare Parts
TUS-50 UNLOADER
Alfa Laval Pump
Handbook
Chicken product Pump
MCD PHE Gasket
Product Catalogue
M
R
R
pu
in
R
yo
R
to
DUS 50 unloader
Alfa Laval Complete
Product Catalogue
M
M
M
GEMU Complete
Product Catalogue
Keofitt Product
Catalogue
Poultry Pump
DMN Westinghouse
Product Catalogue
ns
s
Matrix Process
Process Solutions
Matrix
Solutions
MATRIX HIRE PUMPS
dynamic,
Rent or
Buy? service orientated company.
At
MATRIX,
ourterm,
commitment
to process
technology
through
Rental, short
and long
for a number
of reasons
can beimprovements
more attractive
than smart design and implementation,
make
us
your
ideal
business
partner.
As
the
largest
Alfa
Laval
flow
distributor
in Australia , we offer
purchasing equipment. Rental conserves capital and stretches budgets by not
distribution
and
technical
support
at
your
fingertips.
investing cash in equipment that may be used occasionally.
Rental is simple and flexible. You get what you need when you need it and, when
office warehouses
in three major locations, Melbourne, Adelaide and Brisbane, ensuring total
you areMATRIX
finished,have
you simply
return the equipment.
plus
quick
supply for
critical
process
requirements.
Rental coverage,
can provide
extra
equipment
foryou
peak
demands
or can
enable equipment
to be evaluated before purchase.
24 hours, 7 days…
Great Service and Support
Matrix Process Solutions has extensive rental, sales, service and maintenance capabilities in all the major centres in
Australia.
The Latest Models
Matrix Process Solutions as the leader in the process industry, is adding millions of dollars worth of new equipment to our
inventory every year to ensure we have the equipment that you need. The technology you need today is probably already a
P: 07 is3200
3433
part of our rental fleet and readily available for your immediate use. If the equipment you require
not yet
listed, then we will
F:
07
3200
2477
source it for you.
MPS services
Matrix Process Solutions offers our customers more than just rental. MPS Services refers to our range of value added
programs designed to assist you in your rental needs.
Whether you need:
On-site Setup
Equipment Configuration
Customised Programming
Trained Operators
MPS Services can tailor a package specifically designed for your requirements.
Regency Park 5010
P: 08 8244 1322
F: 07 8244 1722
Moorabbin 3189
P: 03 9553 0928
F: 03 9553 0987
EFTPOS
Page 49
DISCOUNT PAGE
M
M
Ma
M
General Purpose motors for standard applications
Process performance motors for demanding applications
1010 WINE FITTINGS
Motors for hazardous areas
Marine Motors
1011 LKB VALVES
Other low voltage motors & generators
High voltage induction motors
1012 LKC-2 VALVES
Synchronous motors & generators
DC Motors
1013 FLANGES
1000 CLAMP FITTINGS
1001 UNIONS
MOTORS
1002 ALL BENDS
1004 REDUCERS
1005 TEE'S
1006 INDICATION
1007 TUBE CLAMPS
1008 BSP
1009 TUBE
MOTORS FOR EVERY APPLICATION
ABB's General purpose motors are designed for use in general industry, meeting the demands of standard
applications for OEMs.
High output - more power from the frame, saving space, reducing weight and lowering purchase cost
Reliability
Long bearing lifetime
Can be modified to meet most specifications
Large number of features, either built-in or optional
Applicable for VSD
Complete range in energy efficiency class EFF1 or EPAct as options
IEC sizes 56 to 280
0.06 to 95 kW
Alfa Laval Complete
Product Catalogue
Alfa Laval Complete
Spare Parts
Alfa Laval Pump
Handbook
Keofitt Product
Catalogue
MCD PHE Gasket
Product Catalogue
GEMU Complete
Product Catalogue
DMN Westinghouse
Product Catalogue
L
(
Page 50
ns
s
ns
ns
as
rs
rs
rs
rs
rs
MatrixProcess
ProcessSolutions
Solutions
Matrix
Matrix
Matrix Process
Process Solutions
Solutions
MATRIX CUSTOMISED PRODUCTS
VALVE MANIFOLD DESIGN & CONSTRUCT
24 hours, 7 days…
P: 07 3200 3433
Electric Actuation for valves
F: 07 3200 2477
Customised Fabrication solutions.
Mobile Flow Meter / Trolley assembly
Mobile Pump Solutions
Regency Park 5010
P: 08 8244 1322
F: 07 8244 1722
Project consignment stock
now available
on request
Moorabbin
3189
Conditions apply
P: 03 9553 0928
F: 03 9553 0987
Locally modified high specification pump builds
( WFI Pump shown used in Victorian pharmaceutical plant )
EFTPOS
Page 51
DISCOUNTINFORMATION
PAGE
TECHNICAL
FITTINGS
1010 WINE FITTINGS
1000 CLAMP
RUBBER
MATERIALS
Rubber Materials In order to obtain the longest possible lifetime for rubber seals it is essential to choose the right quality for
LKB VALVES
1011 quality,
1001 UNIONS
the actual
duty. Consequently when choosing rubber
the characteristics of the different rubber types should be
considered. All product wetted rubber material conform to FDA.
ALL BENDS
1012 LKC-2 VALVES
1002
EPDM
Rubber
(Ethylene Propylene)
EPDM
rubber is widely used within the food industry as it is resistant to most products used in this sector. Another advantage is that
TRI-CLOVER
SEALS
1013of FLANGES
1003
it may
be used
to a recommend
max. temperatures
140°C (244°F). However, there is one essential limitation, EPDM is not
resistant to organic and non-organic oils and fats. The resistance to ozone is excellent.
1004 REDUCERS
Acrylonitrile
Butadiene Rubber, NBR
NBR
is the rubber type most frequently used for technical purposes. It is quite resistant to most hydrocarbons, e.g oil, grease and
TEE'S
1005
fat. It
is suffi
ciently resistant to diluted lye and nitric acid and may be used to a recommended max. temperature of 95°C
(203°F). As NBR is attacked by ozone it may not be exposed to ultraviolet rays and should thus consequently be stored so
that1006
this isINDICATION
avoided.
Silicone Rubber, Q
The1007
most TUBE
signifi CLAMPS
cant quality of silicone rubber is that it can be applied from temperatures below -50°C (-58°F) to approx.
+180°C (356°F) and still keep its elasticity. The chemical resistance is satisfactory to most products. However, undiluted lye
and1008
acids BSP
as well as hot water and steam may destroy silicone rubber. The resistance to ozone is good. Fluorine Rubber,
FPM
FPM is
1009
often
usedTUBE
when other rubber types are unsuitable, especially at high temperatures up to approx. 180°C (356°F). The
chemical resistance is good to most products, however hot water, steam, lye, acid and alcohol should be avoided. The
resistance to ozone is good.
Hydrogenated acrylonitrileButadiene Rubber, HNBR:
Mechanically strong and normally resistant to ozone and strong oxidizers, animal and vegetable fats, nonpolar solvents, oils
and lubricants, water and aqueous solutions. The recommend max. temperature is 130°C (266°F).
Perfl uoroalkoxy polymer, PFA
PFA is
AVAILABLE
PUBLICATIONS
very similar to PTFE, but opposite to this PFA is thermo plastic and has minimal porosity. PFA has a very high mechanical
strength which makes it a perfect choice when dealing with abrasive products. The PFA seal offers longer service intervals.
The recommended max. temperature for the PFA seal is 90°C (194°F).
Pressure ratings(bar) of Tri-Clamp® Connections
Alfa Laval Complete
Product Catalogue
Alfa Laval Complete
Spare Parts
Alfa Laval Pump
Handbook
Keofitt Product
Catalogue
*Service ratings are based on hydrostatic tests using standard-molded Buna-N material gaskets, with proper installation
of ferrules, assembly of joints and absence of shock pressure. Contact Matrix Process Solutions for service of other
type and material gaskets, and for ratings at higher temperatures.
MCD PHE Gasket
GEMU Complete
DMN Westinghouse
All ratings
shown
are dependent upon related
within the systems
andCatalogue
proper installation. Product Catalogue
Product
Catalogue
Product components
Catalogue
ABB Motors
For temperatures above 120°C, we recommend using only 13MHP clamps.
Page 52
M
M
M
ns
s
at
ot
BR
d
Matrix Process
Process Solutions
Matrix
Solutions
24 hours, 7 days…
P: 07 3200 3433
F: 07 3200 2477
s
is
Moorabbin 3189
P: 03 9553 0928
F: 03 9553 0987
MATRIX PROCESS SOLUTIONS PTY LTD
Regency Park 5010
P: 08 8244 1322
F: 07 8244 1722
EFTPOS
Page 53
DISCOUNT
PAGE Pty. Ltd.
CREDIT APPLICATION FORM
ABN: 28 097 144 897
ACN: 097 144 897
1000 CLAMP FITTINGS
1010 WINE FITTINGS
1001 UNIONS
1011 LKB VALVES
BENDS
1002 ALL
Trading
Name
1012 LKC-2 VALVES
ACN TRI-CLOVER
Number
SEALS
1003
ABN Number
1013 FLANGES
PH Number
REDUCERS
1004
EFTPOS
Fax Number:
1005 TEE'S
POSTAL ADDRESS
1006 INDICATION
POST CODE:
1007 TUBE CLAMPS
1008 BSP ADDRESS
DELIVERY
1009 TUBE
POST CODE:
Names & Details of Partners, Sole Trader or Directors
1
3
2
4
BANK
BRANCH
BSB #
ACCOUNT NUMBER:
TRADE REFERENCES
NAME
PHONE #
FAX #
1
2
Alfa Laval Complete
3Product Catalogue
Alfa Laval Complete
Spare Parts
Alfa Laval Pump
Handbook
Keofitt Product
Catalogue
4
1; I am aware that trading terms are STRICTLY NETT THIRTY (30) DAYS and will undertake to make
payment within thirty (30) days from date of invoice.
2; To the best of my knowledge, all information provided is correct at the time of writing, and we will inform
Matrix Process Solutions Pty. Ltd. of any changes.
3; I/we accept the conditions of trade set down by Matrix Process Solutions Pty. Ltd.
4; I/we understand that all products supplied by Matrix Process Solutions Pty. Ltd. remain the property of
Matrix Process Solutions Pty. Ltd. until payment has been made in full.
MCD PHE Gasket
Signed
Product Catalogue
Print Name
Page 54
GEMU Complete
Product Catalogue
Position
Date:
DMN Westinghouse
Product Catalogue
Process Solutions
PRODUCT
CATALOGUE
www.matrixps.com
VICTORIA
Moorabbin VIC 3189
P: (03) 9553 0928
F: (03) 9553 0987
SOUTH AUSTRALIA
Regency Park 5010
P: (08) 8244 1322
F: (08) 8244 1722
QUEENSLAND
Meadowbrook 4131
P: (07) 3200 3433
F: (07) 3200 2477

MATRIX Product Catalogue - Matrix Process Solution

Transcription

Similar documents

Electronic Parts Catalogue

PLM-PLANET • RC

The University of Malaya Library

CARREFOUR LAVAL

WideGap heat exchangers

Jelitto Perennial Seed Supplier

DEF SOFTWARE PRODUCT CATALOGUE 2009

Inspired by Japan – the new RIMOWA catalogue

Esc OK CHANNEL Display VOTE OKFAIL 123 ABC Esc OK