straight 9ft fabric package

straight 9ft fabric package
Product Features
All packages include:
• (1) Extruded Aluminum Frame
• (18) Channel Bars
• (2) 150 Watt Halogen Lights
• (2) Velcro Receptive Fabric End Panels
• (3) Velcro Receptive Graphic Center Panels
• (1) Case to Counter Conversion Kit
Center Package
Display Height
Display Width
Podium Case
7’4”
9’
38.5”H x 27.5”W x 15.75”D
Finishing
Magnetic strips all around and hanging hardware on top and bottom
Material
Velcro receptive fabric
Construction
Frame
Aluminum frame
Panels
Velcro receptive fabric panels w/ magnetic
strips
Bars
Aluminum channel bars w/ magnetic strips
Podium Case (1) Case - Black heavy duty blow molding
technology construction
(2) Reliable built-in wheels
(2) Easy grip molded handles (top and side)
for easy maneuvering
(4) Lockable turning latches
Weights - Dimensions
Fabric Panel Color Options
Coal
PMS Black c
Imperial
PMS 281c
Shipping Weight 95 lbs
Silver
PMS 423c
Shipping Dimensions 40“ x 28“ x 18“
Parts List
(6) Horizontal channel bars
(2) 150watt halogen lights
(1) Aluminum frame w/bag
(1) Podium wrap
(14) Silver channel bars
(1) Lid fabric
(4) Black channel bars
(1) Repair kit
(1) Podium case w/ lid
(3) Fabric center panels
(1) Instruction sheet
(2) Fabric end panels
(1) Channel bar bag
The box represents 10’x10’ booth.
POP UP DISPLAY—QUICK START INSTRUCTIONS
sh
pu
sh
pu
1. Remove frame from case and
place on floor. Place frame with
the slider(s) for light on the top
facing you.
5. Make sure to flip the magnet side
to be the front side when you
slide it to the frame.
9. Lift end panel and guide front
notch of plastic plate over front
peg. Hook the other side on the
panel peg at the back of the frame.
13. To attach light, slide the bottom
of the light to the light brackets on
the top of the frame.
2. Grasp upper ends of frame and
pull up and outwards. Continue
plling up and outward untill the
frame is fully expanded.
3. To close the frame: Push from
the outside of the frame until it
connected.
6. Start the top of the frame, insert the
pointed end of the channel bar into
the slot in the bracket at the top of
the frame.
7. Slide the bottom of the channel
bar from right to left onto the
metal peg. Continue with the
middle and lower channel bars.
10. Slowly run your hands down
the sides of the panel, attaching
magnetic strips to the channel
bars and straightening as you go.
11. Attach the Velcro of the bottom
of the panel to the black channel
bar inserted to the frame.
12. Hold a center panel on its side
edges about 1/3 of the way down
from the top. Lift section and guide
notches over the panel pegs on the
top hubs. Slowly release the panel,
allowing it to roll down the channel
bars. Repeat for all center panels
aligning them as you go.
15. Place the top lid on the podium.
16. Finished!
14. Wrap the panel for podium and
attach the edges by velcro.
4. Set up the channel bars to the frame.
4 black channel bars go on the 4
outer lower positions (There’s velcro
which holds down the lower corner of
the endcaps) and rest of channel bars
go on the middle lower positions and
all top positions.
8. Center panels are wider than
end panels.