Indian Jewelers Supply Main Catalog Volume 2: Findings, Stones

Transcription

MAIN CATALOG VOLUME 2
1(800) 545-6540
Find even more SAVINGS at www.ijsinc.com
A
WORD FROM THE
PRESIDENT
Greetings from New Mexico,
The Land of Enchantment, a land
of plains, plateaus, and mountains,
famous for the great variety and
magnificent colors of its scenery.
The attraction to our area is not
only attributable to the scenic
beauty of New Mexico’s deserts
and mountains, but also by the
rich Native American and Spanish
cultures that distinguish the state.
Just as New Mexico has a deep,
rich culture and history, so does
our company. Established in
1943 as a small supply house
in Gallup, New Mexico, catering
to the Native American craftsman
producing traditional heritage art,
Indian Jewelers Supply Company
(IJS) has grown to four locations,
serving customers worldwide.
As a multi-cultural employee
owned company, we pride
ourselves in the personal
attention we give to our
customers as well as our prompt
mail order service and the line of
quality products that we carry.
Your business is important to us
and we value you as a
customer. We would like you to
know us as, “the go to people you
can grow with”.
We hope that you will enjoy our
latest catalog. Our goal is to reach
out to all of the jewelry industry’s
reseller’s, manufacturers, craftsmen and hobbyists. IJS now manufactures its own brand of diamond
nd saw
blades. These saw blades are made by our company here in the USA: The IJS Diamond Edition, and
nd the more
aggressive IJS Tomahawx Blade. For more information please see the diamond saw blade
section in this catalog.
If you don’t find what you are looking for in this catalog, please inquire as to its
availability. Your inquires are one source available to help us search out old, new
and different items used in the jewelry manufacturing trade.
D AV I D V I N I N G , P R E S I D E N T & C E O
PLACE
YOUR ORDER TOLL-FREE IN THE
Toll-Free 1.800.545.6540
U.S.
CANADA!
AND
Fax 1.888.722.4172
S H I P P I N G S E RV I C E A N D S H O W R O O M
601 East Coal Avenue, Gallup, NM 87301-6005
ph 1-505-722-4451 or 1-800-545-6540 fax 1-505-722-4172
Hours: Mon-Fri 8:00 A.M. to 6:00 P.M.
Sat 10:00 A.M. to 6:00 P.M.
F U L L - S E RV I C E S H O W R O O M
2105 San Mateo Boulevard (Northeast), Albuquerque, NM 87110-5148
ph 1-505-265-3701 or 1-888-265-3701
fax 1-505-266-5548
Hours: Mon-Fri 8:00 A.M. to 6:00 P.M.
Sat 10:00 A.M. to 5:00 P.M.
U.S. Postal Service address: P.O. Box 1774, Gallup, NM 87305-1774
All locations will be closed Sundays and on the following U.S. National Holidays:
• New Year’s Day (January 1)
• Memorial Day (Last Monday in May)
• Independence Day (July 4)
• Labor Day (First Monday in September)
• Thanksgiving (4th Thursday in November)
• Christmas (December 25)
CH
HOKE
ERS FO
OR INLA
AY
AY
Found in Findings page 89
IJS
P R O U D LY M A N U FA C T U R E S Q U A L I T Y C O M P O N E N T S
for a wide variety of personal adornments, at facilities in Gallup and Albuquerque, New Mexico, U.S.A.
In Sterling Silver (925/1000 parts silver), castings and die stampings
•Bezel Cups
•Conchos & button blanks
•Ring Shanks
•Bracelets
•Design elements
•Charms, miscellaneous
•Earrings
•Buckle Blanks
•Beads
•Shank Buttons
•Rings
•Chokers/pendants
•Rodeo/equestrian trophy insignia
•Native American motifs
•Bola Tie Parts
In Nickel Silver (CDA #752), die stampings
•Bezel Cups
•Shank Buttons
•Buckle Backs
•Beads
•Bola Tie Parts
In Red Brass (CDA #230) , a limited line of die stampings
is available.The items are offered at deep discounts, to reduce
overstocks! Castings in DZR Brass
•Rodeo/equestrian trophy insignia
•Native American motifs
•Fish and Game motifs
•Conchos & button blanks
•Buckle Blanks
SPECIAL ORDERS
To keep our operating costs (and your prices) low, we do not carry large stocks of
certain items. We produce them only on demand, where we have that capability.
In those cases, special terms and conditions will apply. Prices will be determined
at the time of order placement, considering factors like metals market prices.To
allow for lead times, and to fully understand the terms of the purchase, please
inquire in advance.
PRICES Prices are printed in the catalog to help you estimate costs. Actual prices will vary, based on quantity discounts, metal prices, regulatory compliance,
and numerous other conditions.
I.J.S. offers many services to the jewelry and art-metal trades.
They include:
•Sheet-metal coil slitting from 18 to 32 ga.
•Multi-stage punch pressing, tooling creation.
•Atmospheric oven soldering.
•Fusion (“Sparkie”) welding.
•Tumble finishing.
•Lost-wax casting in silver, golds, and bronzes,
plus rubber mold-making and wax injection.
GET
CAST R ING
GS FOR INLAY
Y Found in Findings page 138
IT IN GOLD!!
GOLD CASTINGS can be produced of most patterns in our line. Prices are determined by the gold market price on the day of your order placement. Estimates
can be given where necessary. Popular patterns are kept on hand in 14KY for immediate shipment. Others may require some lead time to produce. Call or
write for details!
Phone: 505-722-4451 -- FAX: 505-722-4172
ATTN: Casting Services, I.J.S., P.O. Box 1774, Gallup, NM 87305-1774
Copyrighted Castings: Items bearing the © symbol are copyrighted by Indian Jewelers Supply Co. The items may be used in any way that does not
remove or intentionally obscure the © symbol. By law, arts protected by copyright may not be reproduced in whole or in part. When these conditions are met,
you may sell the parts under your label.
TABLE
We want to hear from you!
Call Toll-Free within the U.S.
1.800.545.6540
Fax Toll-Free within the U.S.
1.888.722.4172
Visit our website
See what’s new, order products,
learn tips and tricks and more...
WWW.IJSINC.COM
E-mail: [email protected]
Order by Mail
Indian Jewelers Supply
P.O. Box 1774
Gallup, NM 87305-1774
FINDI NG S
Beads
Caprice
Beads - Sterling Silver
Beads - Gold and GoldFilled
Beads - Base Metals
Cords
Soft Cords
Wire
Wire ends and Accessories
Chains - Ready to Wear
Sterling Silver
Gold and GoldFilled
Base Metal
Chains - By the Foot
Sterling Silver
Gold and GoldFilled
Base Metal
Chain Findings
Clasps
Hooks and Eyes
Clasps
Clutches - Magnetic
Cones
Jump Rings
1
1
8
14
15
16
16
20
21
22
22
24
24
25
25
29
30
31
32
32
33
36
37
39
S TONE S
Beads
Seed Beads
Bead Cords
Stone beads and Strands
Cabs and Rough
Turquoise
156
156
160
162
180
180
METAL S
SILVER
Sterling Sheet
Sterling Discs
Sterling Strip
Sterling Tubing
Sterling Grains
Sterling Wire
Sterling Bezel
Argentium® Silver
Fine Silver
Silver Solders
204
204
205
207
207
207
208
211
212
213
216
OF
CONTENTS
Charms
letters and numbers
words
American Indian Figures
American Indian Kokopelli
American Indian Motifs
Feathers
Wildlife: Bears
Wildlife: Birds
Wildlife: Bison/Buffalo
Wildlife: Cows and Hogs
Wildlife: Deer, Elk, and Moose
Wildlife: Goats, Sheep, and Antelope
Wildlife: Mules and Donkeys
Wildlife: Horses
Wildlife: Wolves and Coyotes
Wildlife: Dogs
Wildlife: Cats
Wildlife: Rodents
Wildlife: Reptiles and Amphibians
Wildlife: Insects
Wildlife: Sea Mammals
Wildlife: Fish and Fishing
Design Elements
Old World Icons
Handguns
Old West Icons
Rodeo Icons
Sports
Vegetation
Pendants
Medals - Themed
Squash Blossom Necklace
Pendants
Pendant Bails
Chokers
Bola Tie Parts
Bola Tie Tips
Bola Tie Backs
Bola Tie Cords
Pin Parts
Pins and Catches
Tie Tacks
40
40
41
42
43
43
46
48
50
55
57
58
59
59
59
61
61
62
62
62
63
64
64
65
66
66
67
68
74
74
78
78
80
82
86
89
91
91
92
93
94
94
95
Lapel Pins
Dangles and Head Pins
Bezel Cups
Shadow Boxes
Heads for Cabs
97
99
100
100
101
102
104
104
107
110
110
111
112
116
117
117
118
121
122
122
123
123
124
125
125
126
127
128
129
129
130
134
136
137
138
138
144
147
148
148
152
153
Apparel Accessories
Professional Accessories
Hair Accessories
Formal Accessories
Buttons
Buttons with shanks
Buttons blanks
Conchos
Link Belt Conchos
Cutout Conchos
Conchos
Concho Back and Screws
Buckles
Cast Buckles
Conchos & Blanks
Buckle Bails and Backs
Buckle Pegs, Hinges, & Wires
Belt Straps
Bracelets
Cast Bracelets
Bracelet Blanks
Watches
Watch
Watch
Watch
Watch
tips
Clasps and Bands
Heads
Maintenance
Earrings
Hoops
Ear Posts and Clutches
Ear Clips and Drops
Ear Threaders
Earwires
Rings
Cast Rings for Inlay
Cast Ring Shanks
Cast Rings
Stone Settings
Coral
Mother-of-Pearl
Oyster
Shell
Malachite
Baltic Amber
Lapis
183
185
185
186
188
189
190
Imitation Opal
Imitation Material
Black Oynx
Grade Cabs
Package Matched Cabs
Rough
Synthetic
192
195
196
198
200
201
202
Karat Golds
217
217
217
218
218
219
221
222
222
223
224
224
SilverFilled Sheet
225
226
226
227
227
228
229
229
230
230
231
232
Gold Sheet
Gold Bezel
Gold Tubing
Gold Wire
Gold Grains
Gold Solders
Gold and Silver Filled
GoldFilled Sheet
GoldFilled Wire
GoldFilled Bezel
GoldFilled Tubing
Base Metals
Copper Discs
Copper Wire
Copper Sheet
Nickel Discs
Nickel Sheet
Nickel Wire
Nickel Tubing
Nickel Bezel
Red Brass Discs
Red Brass Sheet
TABLE
Red Brass Wire
Red Brass Tubing
Red Brass Bezel
Yellow Brass Sheet
Yellow Brass Wire
Abrasives
Adhesives and Solvents
Adhesives
Solvents
Beadstringing and Wire Working
Kits and Hand Tools
Beading Accessories
Buffing and Polishing
Dust Collectors
Polishers
Brushes and Discs
Buffing and Polishing Compounds
Buffs
Cleaning
Steam Cleaners
Ultrasonic Cleaners
Cleaner Concentrates
Patinas & Plating
Liquids
Casting
Vulcanizers and Molds
Mold Rubbers
Injection Wax
Wax Injectors
Wax Carving Tools
Melting Wax
Vacuum Casting
Casting Equipment
Ovens
Sand Casting
Drawing and Rolling
Drawing Tools
Rolling Mills
Engraving
Engraving Machines
Engraving Handpieces
Tools Handles
Graver Points
Sharpening
Brass and Bronze Casting Grains
Soft Solders
242
242
246
250
250
253
254
254
256
259
259
260
261
263
265
268
268
271
272
274
274
276
276
277
279
281
282
284
286
288
291
292
294
294
295
296
296
297
300
301
304
Hammers
Dapping Tools Sets
Forming Blocks
Metal Formers & Mandrels
Stakes
423
D I S P L AY & P A C K A G I N G
Table Top Displays
Portable Displays
Metal Clays
Silver Clay
Copper Clay
Hammering & Forming
S TA M P I N G & R E P O U S S E
Hand Made Design Stamps
CONTENTS
232
233
233
234
234
TO O L S
Grinding Wheels
Sanding Discs & Belts
OF
441
442
Hand Tools
Stone Setting and Milgrain
Utility Tools
Hand Clamps
Watch Tools
Hand Files
Needle Files
Hand Drills
Wax tools
Pliers
Cutters
Snips
Disc Cutters
Tweezers & Tongs
Rotary Hand Tools - Motors
Rotary Hand Tools - Speed Controls
Rotary Hand Tools - Hand Pieces
Rotary Hand Tools - Kits
Rotary Hand Tools - Discs
Rotary Hand Tools - Points
Rotary Hand Tools - Abrasives
Rotary Hand Tools - Brushes
Rotary Hand Tools - Mandrels
Rotary Hand Tools - Buffs
Rotary Hand Tools - Burs
Rotary Hand Tools - Bur Sets
Ring Hand Tools
Ring and Bracelet Gauges
Layout & Measure
Rulers & Calipers
Wire Gauges
Scribers & Dividers
Metal Test Kits
Scales
Lapidary
Combo Units
234
235
236
236
236
Bronze Clay
Metal Clay Accessories
Metal Clay Kilns
236
237
241
305
305
307
310
311
313
314
314
315
316
317
318
320
322
323
324
329
331
333
334
336
337
338
341
344
345
346
349
350
351
352
356
357
359
360
360
361
362
362
363
366
366
Arbors
Lapidary Saws
Wheel Units
Wheels
Pads & Belts
Compound Powders
Sealing Wax
Liquids
Repair and Replacement Parts
367
368
369
370
372
373
374
375
376
376
378
379
380
380
381
383
384
384
385
386
389
390
391
391
391
398
399
400
402
403
404
404
407
408
408
409
409
410
412
413
414
415
416
Motors & Accessories
Electric Motors
Arbors and Chunks
Electrical Accessories
Safety & Magnification
Magnification
Safety Glasses
Safety Equipment
Saws
Saw Frames
Saw Frame Blades
Circular Sawblades
Minature Circular Blades
Table Saw Boxes
Soldering
Torches
Torch Parts
Cylinders & Carriers
Heat Preventatives
Flux
Pickling
Soldering Irons
Tumbling
Tumblers
Pins, Shot, and Powders
Burnishing Compounds
Media
Workbenches & Accessories
Workbenches
Workbench Accessories
Bench Vises
Bench Attachments
Engraver Blocks
Soldering Boards
Custom Stamps
Hallmark Stamps
Concho Button Dies
435
436
437
Die Sets
Shot Plates
439
440
Trays and Liners
Pedestals
Boxes
Cards
443
445
448
450
Bags and Tags
Display Accessories
452
453
Index
Terms and Conditions
463
468
Forms
470
REFERENCE
Videos and Books
454
INDEX
Glossary
462
204
Sterling Silver and Fine Silver
ALL PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
S T E R L I N G S I LV E R S H E E T
GA Width
Item No.
Wt. 1x6”
Wt. 6x36”
Size per oz.
Min. Sale
6” x 36” or cut to size
GAUGE
STERLING SILVER SHEET GAUGES
10
METALS
12
14
10
STSH10
3.369 oz.
121.3 oz.
6 x 5/16”
6 x 1/4”
12
STSH12
2.582 oz
95.4 oz
6 x 3/8”
6 x 1/4”
14
STSH14
2.113 oz
75.6 oz
6 x 1/2”
6 x 1/4”
16
STSH16
1.684 oz
60.3 oz
6 x 5/8”
6 x 1/4”
18
STSH18
1.291 oz
48.6 oz
6 x 3/4”
6 x 1/2”
20
STSH20
1.033 oz
38.6 oz
6 x 1”
6 x 1/2”
22
STSH22
0.815 oz
29.4 oz
6 x 1-1/4”
6 x 1”
24
STSH24
0.641 oz
23.4 oz
6 x 1-5/8”
6 x 1”
26
STSH26
0.528 oz
19.0 oz
6 x 2”
6 x 1”
28
STSH28
0.394 oz
14.4 oz
6 x 2-3/8”
6 x 2”
30
STSH30
0.329 oz
11.8 oz
6 x 3-1/4”
6 x 2”
32
STSH32
0.255 oz
9.2 oz
6 x 4”
6 x 3”
34
STSH34
0.210 oz
7.6 oz
6 x 4-3/4”
6 x 3”
16
Various Widths, 36” long
18
20
22
24
26
28
14 4-7/8”
STSH14N
1.74 oz
20.82 oz
62.46 oz
4-7/8 x 1/2”
16 4”
STSH16N
1.13 oz
13.526 oz
40.58 oz
4 x 1”
16 4-1/2”
STSH16N4H
1.25 oz
14.95 oz
44.86 oz
4-1/2 x 1”
18 7”
STSH18W7
1.55 oz
18.60 oz
55.8 oz
7 x 1/2”
22 4-1/4”
STSH22N4Q
0.58 oz
6.93 oz
20.79 oz
4-1/4 x 1”
24
STSH24N
0.44 oz
5.27 oz
15.81 oz
4 x 1”
4”
30
IJS will cut multiple pieces of a sheet, at no cost, where the
cut is at least a 1/2” long and at full sheet width. Each cut is 5¢, billed as item number “CUT
SHEET”. Charges will be levied on
• cutting under 1/2” at full width
• on any further shearing of cut-to-length pieces.
Sheett Cutting Ch
hargges:
32
34
S T E R L I N G S I LV E R P AT T E R N E D S H E E T
3” x 36” or cut to size
GA
Item No.
Wt. 1x3”
Wt. 3x36”
Size per oz.
16
STSH16P
0.81 oz.
28.77 oz.
±3 x 1-1/4” 3 x 2-1/2”
2-1/2
21/2””
Min.
n. Sale
18
STSH18P
0.63 oz.
22.79 oz.
±3 x 1-5/8” 3 x 3-1/2”
20
STSH20P
0.52 oz.
18.76 oz.
±3 x 2”
22
STSH22P
0.39 oz.
14.12 oz.
±3 x 2-1/2” 3 x 5”
24
STSH24P
0.31 oz.
11.17 oz.
±3 x 3-1/4” 3 x 6”
3 x 4”
PEPE TOOLS GUILLOTINE SHEARS
•Ruler with adjustable guide for cutting sheet into equal strips. •Open back for feeding any length of material.
•A receiving table to catch all cut pieces.
•Black finish, achieved by electrolytic oxidation to help
•Material: ASTM M1044 alloy steel.
you find the tiniest slivers of material left behind
•Processing tolerance: +/- 0,2mm
after big cutting jobs.
•Alloy steel cutters - hardness 59 - 62 units HRC, class 8 - 9. •10,000 cuts before blade resharpening.
•Capacity: Mild steel 1.6mm/14 ga. Copper sheet 2.4mm/10 ga.
6-inch or 12-inch Model
Model - Description
Item No.
Price
12”- (320mm) length of cut, Feed table is 600mm (±39”)
long. Ships in two boxes. Ship.Wt. 94 lbs.
239-SHP12G
$810.00
6”- (165mm) length of cut, Feed table is 455mm (±18”).
Ship.Wt. 58 lbs.
239-SHP6G
$680.00
IIndian
di JJewelers
l
S
l Co
C - Main
M i C
Catalog
t l V
Volume
Volu
l
2
Supply
www.ijsinc.com 1-800-545-6540
205
S T E R L I N G S I LV E R D I S C S
DIAM.
Item No.
Wt / Piece
Pcs / OzT
Min. Sale
13 pcs.
7 pcs.
20 Gauge Discs
3/4”
STC20X075
0.0757 ozT
7/8”
STC20X0875
0.1071 ozT
9 pcs.
5 pcs.
1”
STC20X100
0.1427 ozT
7 pcs.
4 pcs.
1-1/8”
STC20X1125
0.1787 ozT
5 pcs.
3 pcs.
1-1/4”
STC20X125
0.2178 ozT
4 pcs.
2 pcs.
1-3/8”
STC20X1375
0.2637 ozT
3 pcs.
2 pcs.
1-1/2”
STC20X150
0.3116 ozT
3 pcs.
2 pcs.
1-3/4”
STC20X175
0.4184 ozT
2 pcs.
1 pc.
2”
STC20X200
0.5525 ozT
1 pc.
1 pc.
22 Gauge Discs
STC22X025
0.0066 ozT
152 pcs.
75 pcs.
Sterling Silver Discs
3/8”
STC22X0375
0.0160 ozT
62 pcs.
31 pcs.
•
7/16”
STC22X04375
0.0200 ozT
50 pcs.
25 pcs.
1/2”
STC22X050
0.0259 ozT
38 pcs.
20 pcs.
9/16”
STC22X05625
0.0343 ozT
29 pcs.
15 pcs.
5/8”
STC22X0625
0.0420 ozT
23 pcs.
12 pcs.
11/16”
STC22X06875
0.0500 ozT
20 pcs.
10 pcs.
3/4”
STC22X075
0.0600 ozT
16 pcs.
8 pcs.
13/16”
STC22X08125
0.0706 ozT
14 pcs.
8 pcs.
7/8”
STC22X0875
0.0801 ozT
12 pcs.
6 pcs.
1”
STC22X100
0.1066 ozT
9 pcs.
5 pcs.
1/4”
1-1/8”
STC22X1125
0.1360 ozT
7 pcs.
4 pcs.
5/16”
1-1/4”
STC22X125
0.1680 ozT
5 pcs.
3 pcs.
1-3/8”
STC22X1375
0.1999 ozT
5 pcs.
3 pcs.
1-1/2”
STC22X150
0.2340 ozT
4 pcs.
1-3/4”
STC22X175
0.3277 ozT
2”
STC22X200
0.4250 ozT
Wt / Piece
Pcs / OzT
Min. Sale
STC26X025
0.0040 ozT
250 pcs.
125 pcs.
STC26X03125
0.0068 ozT
147 pcs.
74 pcs.
3/8”
STC26X0375
0.0097 ozT
103 pcs.
52 pcs.
7/16”
STC26X04375
0.0128 ozT
83 pcs.
42 pcs.
3 pcs.
1/2”
STC26X050
0.0170 ozT
58 pcs.
29 pcs.
3 pcs.
2 pcs.
9/16”
STC26X05625
0.0218 ozT
45 pcs.
23 pcs.
2 pcs.
2 pcs.
5/8”
STC26X0625
0.0265 ozT
37 pcs.
19 pcs.
11/16”
STC26X06875
0.0319 ozT
31 pcs.
16 pcs.
3/4”
STC26X075
0.0376 ozT
26 pcs.
14 pcs.
93 pcs.
13/16”
STC26X08125
0.0458 ozT
22 pcs.
11 pcs.
62 pcs.
7/8”
STC26X0875
0.0519 ozT
19 pcs.
10 pcs.
STC26X100
0.0685 ozT
14 pcs.
8 pcs.
24 Gauge Discs
1/4”
5/16”
STC24X025
STC24X03125
0.0054 ozT
0.0081 ozT
•
Expect some slight imperfections in these mechanically punched discs.
They may have slight edge burs and oily coatings.
Discs are also produced in Copper, Nickel Silver, and Red Brass.
185 pcs.
123 pcs.
DIAM.
Item No.
26 Gauge Discs
3/8”
STC24X0375
0.0117 ozT
85 pcs.
43 pcs.
1”
7/16”
STC24X04375
0.0161 ozT
62 pcs.
31 pcs.
1-1/8”
STC26X1125
0.0869 ozT
12 pcs.
6 pcs.
STC26X125
0.1070 ozT
9 pcs.
5 pcs.
1/2”
STC24X050
0.0217 ozT
46 pcs.
23 pcs.
1-1/4”
9/16”
STC24X05625
0.0271 ozT
36 pcs.
18 pcs.
1-3/8”
STC26X1375
0.1314 ozT
8 pcs.
4 pcs.
15 pcs.
1-1/2”
STC26X150
0.1553 ozT
6 pcs.
4 pcs.
STC26X175
0.2059 ozT
5 pcs.
3 pcs.
STC26X200
0.280 ozT
4 pcs.
2 pcs.
5/8”
STC24X0625
0.0333 ozT
30 pcs.
11/16”
STC24X06875
0.0400 ozT
25 pcs.
13 pcs.
1-3/4”
3/4”
STC24X075
0.0476 ozT
21 pcs.
11 pcs.
2”
13/16”
STC24X08125
0.0569 ozT
18 pcs.
9 pcs.
7/8”
STC24X0875
0.0649 ozT
15 pcs.
8 pcs.
1”
STC24X100
0.0850 ozT
11 pcs.
6 pcs.
3/8”
STC28X0375
0.072 ozT
70 pcs.
35 pcs.
1-1/8”
STC24X1125
0.1093 ozT
9 pcs.
5 pcs.
12mm
STC28X12MM
0.0114 ozT
88 pcs.
44 pcs.
1-1/4”
STC24X125
0.1351 ozT
7 pcs.
4 pcs.
1/2”
STC28X050
0.0126 ozT
80 pcs.
40 pcs.
1-3/8”
STC24X1375
0.1623 ozT
6 pcs.
3 pcs.
9/16”
STC28X05625
0.0160 ozT
63 pcs.
32 pcs.
1-1/2”
STC24X150
0.1965 ozT
5 pcs.
3 pcs.
5/8”
STC28X0625
0.020 ozT
50 pcs.
25 pcs.
1-3/4”
STC24X175
0.2564 ozT
3 pcs.
2 pcs.
3/4”
STC28X075
0.0288 ozT
35 pcs.
18 pcs.
2”
STC24X200
0.3398 ozT
2 pcs.
2 pcs.
1”
STC28X100
0.0508 ozT
10 pcs.
5 pcs.
28 Gauge Discs
METALS
1/4”
206
S T E R L I N G S I LV E R O VA L S
Size (mm). Item No.
Wt / Piece
Pcs / OzT
Min. Sale
20 Gauge Ovals
15 X 20 MM
14 X 25 MM
17 X 32 MM
20 x 38
STO20X20MX38M
0.1650 oz.
6 pcs.
3 pcs.
30 x 40
STO20X30MX40M
0.2563 oz.
4 pcs.
2 pcs.
38 x 56
STO20X38MX56M
0.4632 oz.
2 pcs.
1 pcs.
22 Gauge Ovals
20 X 38 MM
METALS
18 X 25 MM
26.9875 X 36.5125 MM
22 X 29 MM
30 X 40 MM
15 x 20
STO22X15MX20M
0.0499 oz.
20 pcs.
10 pcs.
20 x 38
STO22X20MX38M
0.1293 oz.
8 pcs.
4 pcs.
14 x 25
STO22X14MX25M
0.0588 oz.
17 pcs.
9 pcs.
18 x 25
STO22X18MX25M
0.0750 oz.
13 pcs.
7 pcs.
22 x 29
STO22X22MX29M
0.1050 oz.
10 pcs.
5 pcs.
17 x 32
STO22X17MX32M
0.0927 oz.
11 pcs.
6 pcs.
27 x 36.5
STO22X1116X1716 0.1645 oz.
6 pcs.
3 pcs.
30 x 40
STO22X30MX40M
0.1972 oz.
5 pcs.
3 pcs.
38 x 56
STO22X38MX56M
0.3569 oz.
3 pcs.
2 pcs.
24 Gauge Ovals
38 X 56 MM
S T E R L I N G S I LV E R T E A R D R O P S
Size (mm). Item No.
Wt / Piece
Pcs / OzT
Min. Sale
24 Gauge Teardrops
18 x 25
STD24X18X25
0.056
23 x 29
STD24X23X29
27 x 35
STD24X27X35
17
9 pcs.
0.084
12
6 pcs.
0.117
9
5 pcs.
18 x 25
STD26X16X21
0.0334
STD26X18X25
30
0.0446
22
STD28X18X25
0.0343
29
0.0400 oz.
25 pcs.
13 pcs.
20 x 38
STO24X20MX38M
0.1040 oz.
10 pcs.
5 pcs.
14 x 25
STO24X14MX25M
0.0473 oz.
21 pcs.
11 pcs.
18 x 25
STO24X18MX25M
0.0600 oz.
17 pcs.
9 pcs.
22 x 29
STO24X22MX29M
0.0830 oz.
12 pcs.
6 pcs.
17 x 32
STO24X17MX32M
0.0743 oz.
14 pcs.
7 pcs.
27 x 36.5
STO24X1116X1716 0.132 oz.
8 pcs.
4 pcs.
30 x 40
STO24X30MX40M
0.160 oz.
6 pcs.
3 pcs.
38 x 56
STO24X38MX56M
0.28 oz.
4 pcs.
2 pcs.
26 Gauge Ovals
STO26X15MX20M
0.0325 oz.
31 pcs.
16 pcs.
20 x 38
STO26X20MX38M
0.0826 oz.
12 pcs.
6 pcs.
14 x 25
STO26X14MX25M
0.0388 oz.
26 pcs.
13 pcs.
15 pcs.
18 x 25
STO26X18MX25M
0.0470 oz.
21 pcs.
11 pcs.
11 pcs.
22 x 29
STO26X22MX29M
0.069 oz.
15 pcs.
8 pcs.
17 x 32
STO26X17MX32M
0.059 oz.
17 pcs.
8 pcs.
27 x 36.5
STO26X1116X1716 0.1032 oz.
10 pcs.
5 pcs.
30 x 40
STO26X30MX40M
8 pcs.
4 pcs.
28 Gauge Teardrops
18 x 25
STO24X15MX20M
15 x 20
26 Gauge Teardrops
16 x 21
15 x 20
12 pcs.
0.1290 oz.
S T E R L I N G S I LV E R H E A R T S
Size (mm). Item No.
16 X 21 MM
18 X 25 MM
23 X 29 MM
Wt / Piece
Pcs / OzT
Min. Sale
26 Gauge Teardrops
5.5x5.5
STHEARTSM
0.0027 oz.
370 pcs.
185 pcs.
9x9
STHEARTMED
0.0064 oz.
156 pcs.
78 pcs.
0.0263 oz.
38 pcs.
19 pcs.
11.5x11.5 STHEARTLG
5.5 X 5.5 MM
9 X 9 MM
11.5 X 11.5 MM
27 X 35 MM
Indian Jewelers Supply Co - Main Catalog Volume 2
207
S T E R L I N G S I LV E R S T R I P S
1” wide
Gauge (Ga)
Item No.
Weight / Ft. Length / oz
Min. Sale
28
ST28X1P
0.785 oz
1’3”
1 ft.
30
ST30X1P
0.64 oz
1’6”
1 ft.
32
ST32X1P
0.530 oz
1’10”
1 ft.
34
ST34X1P
0.420 oz
2’4”
1 ft.
Min. Sale
ST22X150P
0.247 oz
±4 feet
2 ft.
24 x 1/8”
ST24X18P
0.164 oz
±6 feet
3 ft.
26 x 1/4”
ST26X14P
0.263 oz
±3’10”
2 ft.
32 x .270”
ST32X270P
0.141 oz
±7 feet
3 ft.
34 x 5/32”
ST34X532P
0.0617 oz
±16’ 2”
10 ft.
Item No.
26
0.082”
2.90mm
26
0.049”
2.03mm
28
0.077”
2.56mm
30
0.044”
1.63mm
Min Sale
Round Tubing, Cut to 12” lengths for shipping.
20ga 3.66mm
0.080” STTB07
0.724 oz.
16.6”
12”
26ga 2.90mm
0.082” STTB09
0.330 oz.
36.0”
12”
26ga 2.03mm
0.049” STTB12
0.197 oz.
61.0”
12”
28ga 2.56mm
0.077”
STTB10
0.203 oz.
59.0”
12”
30ga 1.63mm
0.044” STTB14
0.103 oz.
115.0”
12”
Square Tubing, Cut to 12” lengths for shipping.
26ga 2.56mm
0.069”
STTB10SQ
0.358 oz.
33.6”
12”
26ga 2.03mm
0.049”
STTB12SQ
0.263 oz.
45.7”
12”
O.D.
I.D.
3.66mm
I.D.
O.D.
0.080”
GAUGE
Wall
20
METALS
S T E R L I N G S I LV E R T U B I N G
O.D.
Item No.
22 x .150”
I.D.
Gauge (Ga)
GAUGE
Less than 1” wide - (Narrow Strips)
26
0.069”
2.56mm
26
0.049”
2.03mm
S T E R L I N G S I LV E R L A R G E D I A M E T E R T U B I N G
Wall
O.D.
I.D.
Item No.
Min Sale
Round Large-diameter Tubing
26ga 6.350mm 0.218”
27ga 5.0mm
STTB250
0.774 ozT
4.37mm STTB27X5MM 0.536 ozT
15”
6”
22.37”
6”
20”
6”
28ga 6.350mm 0.224”
STTB28X250
0.6012 ozT
28ga 9.525mm 0.350”
STTB375
0.91 ozT
12”
6”
28ga 11.112mm0.4115
STTB28X4375 1.0176 ozT
11.75”
6”
28ga 12.70mm 0.475
STTB500
9”
6”
1.28 ozT
S T E R L I N G S I LV E R C A S T I N G G R A I N S
Type
Description
Composition
Liquid Temp
Solid Temp
Regular Grains
Specific gravity: 10.36
92.5% silver
7.5% copper
1655ºF/902ºC
1435ºF/779ºC
Deoxidizing Grains
exhibits excellent flow characteristics minimum 92.5% 1685°F (918°C)
during casting. Vickers Hardness of Ag guaranteed
investment castings is about 82.
S T E R L I N G S I LV E R S C R A P
REGULAR GRAINS
DEOXIDIZING GRAINS
Casting Temp
Item No.
Min Sale.
STGRAIN
0.5 ozt.
1835°F (1002°C) STGRNDEOX
FOR
CASTING
Class
Description
Item No.
A
Unsoldered, unheated, and clean
STSCRAPA
B
Soldered and or heated
STSCRAPB
0.5 ozt.
METALS
Dimensions
Item No.
Min. Sale
2
0.258”
STRD02
3.4100 ozT
3.5 in
0.5 ft
4
0.204”
STRD04
2.1400 ozT
5.5 in
0.5 ft
6
0.162”
STRD06
1.3500 ozT
9.0 in
0.5 ft
8
0.129”
STRD08
0.8500 ozT
14.5 in
0.5 ft
10
0.102”
STRD10
0.5300 ozT
22.0 in
0.5 ft
12
0.081”
STRD12
0.3350 ozT
3 ft
1.0 ft
14
0.064”
STRD14
0.2110 ozT
4.66 ft
2.0 ft
16
0.051”
STRD16
0.1320 ozT
7.50 ft
3.0 ft
18
0.040”
STRD18
0.0835 ozT
12.00 ft
5.0 ft
20
0.032”
STRD20
0.0525 ozT
19.00 ft
10 ft
22
0.025”
STRD22
0.0330 ozT
30.00 ft
15 ft
24
0.020”
STRD24
0.0208 ozT
48.00 ft
25 ft
26
0.016”
STRD26
0.0131 ozT
76.00 ft
40 ft
GAUGE
GA
0
2
4
6
8
8W
9
10
11
Half-hard Temper
Min. Sale
12
15.00 ft
8 ft
13
STRD20HH 0.0525 ozT
19.00 ft
10 ft
14
STRD21HH 0.041 ozT
24.00 ft
12 ft
16
0.025”
STRD22HH 0.0330 ozT
30.00 ft
15 ft
0.020”
STRD24HH 0.0208 ozT
48.00 ft
25 ft
GA
Dimensions
Item No.
19
0.036”
STRD19HH 0.0670 ozT
20
0.032”
21
0.029”
22
24
18
19
Hard Temper
Dimensions
20.5 0.032”
20
Item No.
Min. Sale
STRD205
0.0480 ozT
10 ft
S T E R L I N G S I LV E R
21.00 ft
20.5
21
22
HALF-ROUND WIRE
24
Soft Temper
GA
Dimensions
Item No.
Min. Sale
0
0.325 x 0.162”
STHR00
2.952 oz.
4-1/8”
6 in.
2
0.258 x 0.129”
STHR02
1.63 oz.
7-3/8”
6 in.
4
0.204 x 0.102”
STHR04
1.11 oz.
10-13/16”
6 in.
6
0.162 x 0.081”
DOUBLE
HALF-ROUND
ROUND WIRE
Soft Temper
GA
HALF-ROUND
ROUND
208
STHR06
.67 oz.
1’6”
12 in.
8
0.128 x 0.064”
STHR08
.41 oz.
2’5”
2 ft.
8W
0.128 x 0.064”
STHR08W
.52 oz.
1’11”
2 ft.
9
0.114 x 0.057”
STHR09
.325 oz.
3’1”
10
0.101 x 0.051”
STHR10
.250 oz.
4’
4 ft.
11
0.090 x 0.045”
STHR11
.197 oz.
5’1”
5 ft.
12
0.081 x 0.040”
STHR12
.170 oz.
5’11”
5 ft.
13
0.072 x 0.036”
STHR13
.145 oz.
6’11”
5 ft.
14
0.064 x 0.032”
STHR14
.120 oz.
8’4”
5 ft.
16
0.051 x 0.025”
STHR16
.065 oz.
15’5”
8 ft.
18
0.040 x 0.020”
STHR18
.044 oz.
22’9”
12 ft.
20
0.032 x 0.016”
STHR20
.026 oz.
38’6”
20 ft.
22
0.025 x 0.013”
STHR22
.018 oz.
55’6”
30 ft.
3 ft.
26
GA
Base x Height
DOUBLE HALF-ROUND WIRE
Item No.
Min. Sale
8
0.250 x 0.080”
STDH08
1.08 oz.
11-1/8”
1 ft.
10
0.200 x 0.050”
STDH10
0.535 oz.
22-7/16”
2 ft.
12
0.157 x 0.040”
STDH12
0.37 oz.
32-7/16”
3 ft.
14
0.128 x 0.030”
STDH14
0.222 oz.
54”
4 ft.
Wire Coiling Charges
Applied to orders when two or more coils, under 5 ounces each, of a
single gauge are requested. Charge is $.50 per coil.
1) One 4-ounce coil of 22 ga. round wire and one 2-ounce coil of 20 ga.
half-round wire will not incur a coiling charge.
2) Five 3-ounce coils of 22 ga. round sterling silver wire:
5 coils x $ .50 = $2.50 coiling charge.
Item number on your invoice will be “COILCHARGE”.
Half-hard Temper
GA
Dimensions
Item No.
18
0.040 x 0.020”
STHR18HH .044 oz.
22’9”
Min. Sale
20
0.032 x 0.016”
STHR20HH .026 oz.
38’6”
15 ft.
21
0.028 x 0.014”
STHR21HH .020 oz.
50’
25 ft.
22
0.025 x 0.013”
STHR22HH .018 oz.
55’6”
30 ft.
12 ft.
S T E R L I N G S I LV E R S Q U A R E W I R E
Soft Temper
FLAT
LOW DOME
TRIANGLE
SQUARE
GAUGE
209
0
1
1.5
2
2.25
2.5
GA Height
Item No.
Min. Sale
3
0.220” (5.59mm)
STSQ03
3.133
3-13/16”
6 in.
6
0.162” (4.11mm)
STSQ06
1.71
7”
6 in.
8
0.128” (3.25mm)
STSQ08
1.08
11-1/8”
12 in.
10 0.101” (2.57mm)
STSQ10
0.665
1’ 6”
18 in.
12 0.081” (2.06mm)
STSQ12
0.415
2’ 5”
2 ft.
14 0.064” (1.63mm)
STSQ14
0.265
3’ 9”
4 ft.
16 0.051” (1.30mm)
STSQ16
0.155
6’ 6”
5 ft.
18 0.040” (1.02mm)
STSQ18
0.105
9’ 6”
6 ft.
20 0.032” (0.81mm)
STSQ20
0.068
14’ 8”
10 ft.
21
0.028” (0.71mm)
STSQ21
0.052
19’ 3”
15 ft.
22 0.025” (0.64mm)
STSQ22
0.042
23’ 10”
20 ft.
24
STSQ24
0.024
41’ 6”
30 ft.
0.020” (0.51mm)
Half-hard Temper
4
GA Height
Item No.
5
18 0.040” (1.02mm)
STSQ18HH 0.105
9’ 6”
6 ft.
20 0.032” (0.81mm)
STSQ20HH 0.068
14’ 8”
10 ft.
21
0.028” (0.71mm)
STSQ21HH 0.052
19’ 3”
15 ft.
7
22 0.025” (0.64mm)
STSQ22HH 0.042
23’ 10”
20 ft.
8
24
STSQ24HH 0.024
41’ 6”
30 ft.
6
0.020” (0.51mm)
Min. Sale
9
10
S T E R L I N G S I LV E R S Q U A R E R O D S
12
3-foot maximum length
14
16
18
Minimum sale is 6 inchs of a gauge
GA Height
Item No.
Weight / Ft. Length / oz Weight / Rod
0
0.325” (8.26mm)
STSQ00
6.720 ozT
1-3/4”
20.54
1
0.289” (7.34mm)
STSQ01
5.13 ozT
2-5/16”
15.4
20
S T E R L I N G S I LV E R T R I A N G L E W I R E
21
22
24
S T E R L I N G S I LV E R F L AT W I R E
GA Base x Height
Item No.
Min. Sale
0
0.530 x 0.405”
STTR0
7.5 oz.
1.6”
4 in.
1
0.380 x 0.225”
STTR1
3.16 oz.
3.8”
4 in.
1.5 0.325 x 0.200”
STTR112
2.593 oz.
4.6”
4 in.
2
0.258 x 0.160”
STTR2
1.643 oz.
7.3”
4 in.
3
0.215 x 0.097”
STTR3
0.796 oz.
15.0”
1 ft.
4
0.175 x 0.090”
STTR4
0.644 oz.
18.6”
1 ft..
5
0.156 x 0.111”
STTR5
0.705 oz.
17.0”
1 ft.
6
0.122 x 0.095”
STTR6
0.519 oz.
23.0”
2 ft.
7
0.103 x 0.081”
STTR7
0.399 oz.
30
2 ft.
8
0.080 x 0.064”
STTR8
0.245 oz.
49
3 ft.
9
0.050 x 0.042”
STTR9
0.103 oz.
116
6 ft.
GA
Height
Width
Item No.
Min Sale
0
0.347”
0.742”
STFL0
14.80 oz
7/8”
6 in.
1
3/16”
5/8”
STFL1
7.425 oz
15/8”
6 in.
1.5
0.128”
0.625”
STFL112
5.032 oz
21/4”
6 in.
GA Base x Height
Item No.
2
1/8”
3/8”
STFL2
3.060 oz
4”
6 in.
1
0.575 x 0.070”
STLD1
2.01 oz.
6”
6 in.
0.515 x 0.072”
7”
6 in.
S T E R L I N G S I LV E R L O W D O M E W I R E
Min. Sale
2.25 0.0789”
0.3150” STFL225
1.62 oz
7”
6 in.
2
STLD2
1.729 oz.
2.5
0.2362” STFL212
1.224 oz
97/8”
6 in.
3
0.412 x 0.062”
STLD3
1.18 oz.
10”
1 ft.
0.232 x 0.072”
STLD4
0.883 oz.
13”
1 ft.
0.170 x 0.040”
STLD5
0.34 oz.
35”
3 ft.
0.0787”
3
1/16”
3/16”
STFL3
0.720 oz
163/4”
12 in.
4
4
0.0787”
0.1575” STFL4
0.788 oz
15”
12 in.
5
METALS
3
210
S T E R L I N G S I LV E R T W I S T E D W I R E
Decorative wires are also available
in 14KY gold, goldfilled, nickel, and
brass.
A
B
C
Stated gauge is size of round wire before doubling and twisting.
GA
O.D. post twist (appr.)
Item No.
Min Sale
A
14
0.120” (3.05mm)
STTW14
0.480 oz.
2’
1 ft.
B
16
0.095” (2.41mm)
STTW16
0.331 oz.
3’
2 ft.
C
18
0.077” (1.96mm)
STTW18
0.192 oz.
5’ 3”
3 ft.
D
20
0.062” (1.57mm)
STTW20
0.131 oz.
7’ 7”
4 ft.
E
22
0.047” (1.19mm)
STTW22
0.078 oz.
12’ 10”
7 ft.
F
24
0.037” (.94mm)
STTW24
0.047 oz.
21’ 3”
10 ft.
D
E
S T E R L I N G S I LV E R P AT T E R N E D W I R E
METALS
F
G
H
I
Width
Thickness
Item No.
Min Sale
G
0.161” (4.09mm) 0.054” (1.37mm) STPA1
0.45 oz.
2’ 3”
2 ft
H
0.146” (3.71mm) 0.068” (1.73mm) STPA2
0.44 oz.
2’ 3-1/4”
2 ft
I
0.145” (3.68mm) 0.052” (1.32mm) STPA4
0.37 oz.
2’ 8-3/8”
2 ft
J
0.308” (7.82mm) 0.042” (1.07mm) STPA7
0.70 oz.
1’4”
2 ft
K
0.122” (3.10mm) 0.050” (1.27mm) STPA8
0.30 oz.
3’ 4”
2 ft
L
0.077” (1.96mm) 0.045” (1.14mm) STPA10
0.18 oz.
5’ 7”
2 ft
M
0.187” (4.75mm) 0.056” (1.42mm) STPA36
0.433 oz.
2’ 3-3/4”
2 ft
N
0.125” (3.18mm) 0.053” (1.35mm) STPA68
0.39 oz.
2’6”
2 ft
O
0.211” (5.36mm) 0.057” (1.45mm) STPA99
0.611 oz.
1’5”
2 ft
P
0.221” (5.61mm) 0.054” (1.37mm) STPA172
0.56 oz.
1’9”
2 ft
J
S T E R L I N G S I LV E R H A L F - R O U N D B E A D W I R E
GA
K
Width
Item No.
Min Sale
“Premium Pearl” Imported
L
M
N
O
Q
15
1.5mm
STHRBD15PP 0.074 ozt.
±13.5 ft.
6 ft.
R
12
2.0mm
STHRBD20PP
0.132 ozt.
±7.6 ft.
5 ft.
S
10
2.5mm
±5.0 ft.
4 ft.
T
9
3.0mm
±3.5 ft.
3 ft.
U
7
3.5mm
±3 ft.
2 ft.
V
6
4.0mm
STHRBD40PPS 0.512 ozt.
±2 ft.
1 ft.
W
6
4.0mm
±2 ft.
1 ft.
X
4
5.0mm
STHRBD50PPS 0.792 ozt.
±1’ 4”
1 ft.
Y
4
5.0mm
±1.5 ft
1 ft.
HELPFUL TOOLS WRAP-AND-TAP PLIERS
P
Q
R
S
T
Use these tools to shape rings, toggle claps, earwire and more. Especially good for looping half
round wire or patterned stock. Cushioned grips, stainless steel construction.
Uses plastic tubing.
Small
(barrel sizes
5, 7, 10mm)
item No. 230-WNTS
Price:
$20.75
U
V
W
Large
(barrel sizes
13, 16, 20mm)
item No. 230-WNPL
X
Y
Price:
$20.75
211
S T E R L I N G S I LV E R F U L L - R O U N D B E A D W I R E S
GA
Diam
Item No.
Min Sale
A
6
0.162”
STFRBD06
0.95 oz
± 13”
1 ft.
B
8
0.128”
STFRBD08
0.65 oz.
± 18”
1 ft.
C
10
0.101”
STFRBD10
0.38 oz.
± 2’ 8”
2 ft.
D
12
0.081”
STFRBD12
0.24 oz.
± 4’ 2”
3 ft.
E
14
0.064”
STFRBD14
0.14 oz.
± 7’ 2”
4 ft.
F
16
0.051”
STFRBD16
0.13 oz.
± 7’ 8”
6 ft.
G
18
0.040”
STFRBD18
0.055 oz.
± 18’
6 ft
A
B
C
D
E
S T E R L I N G S I LV E R G A L L E R Y W I R E
AND
BEZEL
F
Item No.
Min Sale
0.020” (5.08mm)
STGA1291H
±0.152 ozT
6’ 6”
18”
I
0.20” (5.08mm)
STGA3142
±0.18 ozT
5’
J
0.368” (9.35mm)
STGA3158
±0.2835 ozT 3’ 6”
18”
K
0.188” (4.78mm)
STGA318
±0.135 ozT
7’ 5”
18”
L
0.340” (8.64mm)
STGA599
±0.247 ozT
4’
18”
M
0.201” (5.11mm)
STGA559
±0.143 ozT
7’
18”
N
0.098” (2.49mm)
STGA144
±0.067 ozT
15’
18”
O
0.177” (4.50mm)
STGA714
±0.156 ozT
6’ 5”
18”
P
0.114” ( 2.90mm)
STGA1358H
±0.1615 ozT 6’ 2”
18”
Q
0.165” (4.19mm)
STG3623
±0.2760 ozT 3’ 6”
18”
G
18”
H
I
J
K
L
S T E R L I N G S I LV E R S T E P B E Z E L
Elevates a cab by resting it on the internal “step”. Step bezel is also available in 14K
yellow gold.
Step Height
Total Height Base Thinkness
Item No.
Weight / Ft. Min Sale
R
0.037”
0.095”
0.044”
STSTP01
0.155 oz.
3 ft.
S
0.045”
0.095”
0.045”
STSTP25
0.140 oz.
4 ft.
T
0.078”
0.127”
0.055”
STSTP27
0.255 oz.
2 ft.
U
0.045”
0.131”
0.044”
STSTP37
0.185 oz.
3 ft.
M
N
O
P
Q
HELPFUL TOOL
Description
Item No.
Price
R
Rawhide Mallets: Used to prevent marring of metals being shaped.
Treated hide heads are mounted on hickory handles.
1-1/4” face diameter, 2-1/2” long, 4 oz.
220-HRH4
S
$11.85
T
U
METALS
Height
H
212
THE ARGENTIUM® ADVANTAGE!
•Firescale elimination
•Environmental advantages (no need to plate/pickle).
•Increased ductility
•High tarnish resistance, popular with sellers and wearers of silver jewellery.
•Precipitation hardening and simple heat-hardening properties.
•Greater thermal/electrical resistance for easier welding and laser forming.
Solidus melting temperature: 1410°F (766°C)
Liquidus flow point is 1610°F (877°C)
18
A R G E N T I U M ® S T E R L I N G S I LV E R
SQUARE
HALF-ROUND
ROUND
GAUGE
METALS
Argentium® Sterling Silver modifies the traditional alloy (92.5% silver + 7.5% copper)
by replacing some copper with germanium. Silver content remains 92.5%, to keep the name “sterling silver”.
GA
Item No.
Weight / Ft.
Length / oz
Min Sale
Round Wire - Half Hard
18
STARD18HH
0.083 oz.
12 ft.
none
20
20
STARD20HH
0.052 oz.
19 ft.
none
21
21
STARD21HH
0.042 oz.
24 ft.
none
22
22
STARD22HH
0.033 oz.
30 ft.
none
24
STARD24HH
0.022 oz.
47 ft.
none
26
STARD26HH
0.013 oz.
76 ft.
none
28
STARD28HH
0.008 oz.
125 ft.
none
24
26
28
Round Wire - Dead Soft
18
STARD18
0.083 oz.
12 ft.
none
20
STARD20
0.052 oz.
19 ft.
none
21
STARD21
0.042 oz.
24 ft.
none
22
STARD22
0.033 oz.
30 ft.
none
24
STARD24
0.022 oz.
47 ft.
none
26
STARD26
0.013 oz.
76 ft.
none
28
STARD28
0.008 oz.
125 ft.
none
none
Square Wire - Half Hard
18
STASQ18HH
0.107 oz.
9.30 ft.
20
STASQ20HH
0.067 oz.
15 ft.
none
21
STASQ21HH
0.054 oz.
18.5 ft.
none
22
STASQ22HH
0.045 oz.
22.2 ft.
none
Square Wire - Dead Soft
Wire-wrapping by Phyllis Shorty
18
STASQ18
0.107 oz.
9.30 ft.
none
20
STASQ20
0.067 oz.
15 ft.
none
21
STASQ21
0.054 oz.
18.5 ft.
none
22
STASQ22
0.045 oz.
22.2 ft.
none
Half-round Wire - Dead Soft
18
STAHR18
0.044 oz.
22’ 9”
12 ft.
20
STAHR20
0.026 oz.
38’ 6”
20 ft.
Argentium® Silver is patented and trademarked by Argentium® Silver Company, UK.
Peter Johns developed Argentium® Silver at Middlesex University’s School of Art & Design.
F I N E S I LV E R B E Z E L S T R I P
GA
Width
Item No.
Weight / Ft.
Weight / Spool
Length / oz
Min Sale
Serrated
28
3/32”
AG28X332SER 0.0593 oz.
±9.3 oz.
16’ 8”
10 ft.
30
3/32”
AG30X332SER 0.0521 oz.
±7.9 oz.
19’ 2”
10 ft.
26
1/8”
AG26X18SER 0.1160 oz.
±11.45 oz.
8’ 8”
5 ft.
28
1/8”
AG28X18SER 0.0820 oz.
±14.0 oz.
12’ 2”
6 ft.
30
1/8”
AG30X18SER 0.0703 oz.
±13.6 oz.
14’ 3”
10 ft.
26
3/16”
AG26X316SER 0.1770 oz.
±21.11 oz.
5’ 8”
5 ft.
28
3/16”
AG28X316SER 0.1392 oz.
±22.5 oz.
7’ 2”
5 ft.
30
3/16”
AG30X316SER 0.117 oz.
±19.3
8’6”
4 ft.
213
FINE SILVER
Fine silver is 99.9% pure silver. Its softness makes it
ideal for inlaying, and as a bezel material for
stonesetting. Its high melting point (1761°F/961°C)
helps it to handle the rigors of enamelling.
International designation is 999.
3/32” SERRATED
1/8” SERRATED
Plain, Narrow
3/32”
AG26X332P
0.0990 oz.
±16 oz.
10’
6 ft.
28
3/32”
AG28X332P
0.0722 oz.
±10 oz.
13’ 10”
9 ft.
30
3/32”
AG30X332P
0.0667 oz.
±32 oz.
15’
10 ft.
26
1/8”
AG26X18P
0.1320 oz.
±20 oz.
7’ 6”
4 ft.
28
1/8”
AG28X18P
0.09625 oz.
±16 oz.
10’ 4”
8 ft.
30
1/8”
AG30X18P
0.0845 oz.
±16 oz.
11’ 10”
8 ft.
22
0.150”
AG22X150P
0.2518 oz.
±23 oz.
4’
2 ft.
26
3/16”
AG26X316P
0.1967 oz.
±30 oz.
5’
4 ft.
28
3/16”
AG28X316P
0.14525 oz.
±24 oz.
6’ 10”
6 ft.
30
3/16”
AG30X316P
0.12725 oz.
±21 oz.
7’ 10”
5 ft.
26
1/4”
AG26X14P
0.264 oz.
±20 oz.
3.75’
4 ft.
3/16” SERRATED
3/32” PLAIN
METALS
26
1/8” PLAIN
0.150” PLAIN
3/16” PLAIN
1/4” PLAIN
Serrated/Ribbed
28
1/8”
AG28X18R
0.0820 oz.
±14.0 oz.
12’ 2”
6 ft.
28
3/16”
AG28X316R
0.1392 oz.
±22.5 oz.
7’ 2”
5 ft.
1/8” SERRATED RIBBED
Scalloped
28
1/8”
AG28X18SC
0.0930 oz.
±15.8 oz.
10 ft. 9 in.
6 ft.
30
1/8”
AG30X18SC
0.068 oz.
±14.42 oz.
14 ft. 9 in.
5 ft.
28
3/16”
AG28X316SC 0.1430 oz.
±20.3 oz.
7 ft.
5 ft.
30
3/16”
AG30X316SC 0.104 oz.
±27.62 oz.
9 ft. 7 in.
5 ft.
3/16” SERRATED RIBBED
1/8” SCALLOPED
3/16” SCALLOPED
F I N E S I LV E R S H E E T , cut-to-size
GA
Thickness Item No.
Weight 6” x 1”
Weight 6” x 36”
Approx. Size / oz Min Sale
20
0.032”
26
0.016”
AGSH20
1.044 oz.
37.58 oz.
6 x 1”
6 x 1”
AGSH26
0.528
19.01
6 x 1-7/8”
6 x 1”
28
30
0.012”
AGSH28
0.433
15.54
6 x 2-1/4”
6 x 2”
0.010”
AGSH30
0.356
12.82
6 x 2-3/4”
6 x 2”
F I N E S I LV E R R O U N D W I R E
GA
Thickness Item No.
Weight / Ft.
Length / oz
Min Sale
12
0.081”
AGRD12
0.34 oz
2 ft. 11 in.
1 ft.
14
0.064”
AGRD14
0.213 oz.
4 ft. 9 in.
1 ft.
16
0.051”
AGRD16
0.1362 oz.
7 ft. 6 in.
6 ft.
18
0.040”
AGRD18
0.0846 oz.
11 ft. 10 in.
9 ft.
20
0.032”
AGRD20
0.0532 oz.
18 ft. 10 in.
15 ft.
22
0.025”
AGRD22
0.0335 oz.
29 ft. 10 in.
20 ft.
24
0.020”
AGRD24
0.0210 oz.
47 ft. 8 in.
20 ft.
26
0.016”
AGRD26
0.0133 oz.
75 ft.
25 ft
GAUGE
ROUND
12
14
16
18
20
22
24
26
214
S I LV E R P R I C E A D D - O N S — F I N E , S T E R L I N G
AND
ARGENTIUM
METALS
Prices listed below are to be added to the daily Handy and Harman silver quote. All items on this list combine for quantity price discounts.
Prices effective 11 April, 2011 -- subject to change without notice. Price breaks awarded on total ounces purchased by one customer on one order,
delivered to one destination, FOB Gallup and Albuquerque stores.
FORM
0+ ozT
5+ ozT
10+ ozT
25+ ozT
Stg Sheet 10 - 28 Ga.
$4.15
$3.70
$3.05
$2.40
Stg Sheet 30 - 34 Ga.
$4.36
$3.91
$3.26
$2.58
Stg Sheet Patterned
$6.11
$5.66
$5.01
$4.33
Stg “C” Strip: ST22X150P and ST24X18P
$4.15
$3.70
$3.05
Stg “E” Strip: ST32X270P and ST24X532P
$4.56
$4.11
Stg “F” Strip: ST36X105P
$5.04
$4.59
Stg Ovals and Circles
$6.51
Stg Heart Small
50+ ozT
100+ ozT
250+ ozT
500+ ozT
$2.10
$1.95
$1.90
$1.35
$2.26
$2.07
$2.02
$1.55
$4.01
$3.86
$3.81
$3.51
$2.40
$2.10
$1.95
$1.90
$1.35
$3.46
$2.83
$2.51
$2.36
$2.31
$1.93
$3.94
$3.31
$2.99
$2.84
$2.76
$2.41
$6.01
$5.46
4.30
4.11
4.05
3.90
3.76
$9.86
$9.31
$8.31
$7.86
$7.66
$7.51
$7.46
$7.31
Stg Heart Medium
$7.45
$6.90
$5.90
$5.45
$5.25
$5.15
$5.10
$4.80
Stg Heart Large
$6.23
$5.68
$4.68
$4.23
$4.03
$3.93
$3.88
$3.58
Stg Rd 2ga to 20.5ga
$4.50
$4.05
$3.40
$2.72
$2.45
$2.30
$2.25
$1.72
Stg Rd 21ga to 26ga
$4.77
$4.32
$3.67
$2.99
$2.70
$2.54
$2.49
$1.97
Stg HR 00
$5.93
$5.38
$4.38
$4.03
$3.83
$3.68
$3.63
$3.48
Stg HR 2ga to 14ga
$5.00
$4.55
$3.90
$3.47
$3.12
$2.97
$2.92
$2.20
Stg HR 16ga to 18ga
$5.11
$4.66
$4.01
$3.57
$3.20
$3.09
$3.04
$2.55
Stg HR 20ga to 22ga
$5.46
$5.01
$4.36
$3.92
$3.60
$3.27
$3.22
$2.94
$3.53
Stg Double HR
$6.28
$5.73
$4.73
$4.18
$3.98
$3.88
$3.83
Stg SQ 00 ga to 14 ga
$5.24
$4.79
$4.14
$3.71
$3.32
$3.19
$3.14
$2.46
$5.34
$4.89
$4.24
$3.87
$3.52
$3.39
$3.34
$2.82
$5.49
$5.04
$4.39
$3.96
$3.67
$3.54
$3.49
$2.99
Stg TR 1 to 6
$5.13
$4.68
$4.03
$3.60
$3.21
$3.08
$3.03
$2.37
Stg TR 7 to 9
$5.26
$4.81
$4.16
$3.73
$3.28
$3.18
$3.13
$2.54
Low Dome
$5.13
$4.68
$4.03
$3.60
$3.21
$3.08
$3.03
$2.37
Stg Flat Wire, all sizes
$5.91
$5.46
$4.81
$4.13
$3.84
$3.71
$3.66
$3.29
Stg TB7,9,10,12,250
$9.66
$9.11
$8.61
$8.30
$8.13
$7.98
$7.93
$7.25
Stg Tube: 27 & 28 ga. wall, 14, & Square
$13.66
$13.16
$12.66
$12.16
$11.66
$11.41
$11.26
$11.16
Stg TW 14ga to 20ga
$6.94
$6.39
$5.39
$4.84
$4.64
$4.54
$4.49
$4.19
Stg TW 22ga to 24ga
$7.09
$6.54
$5.54
$4.99
$4.79
$4.69
$4.64
$4.34
Stg Rnd Bead 4ga to 14ga
$12.96
$12.16
$11.16
$10.51
$9.16
$8.31
$8.21
$7.72
Stg Rnd Bead 16, 18ga
$13.06
$12.26
$11.26
$10.11
$9.21
$8.76
$8.66
$8.17
Stg Gallery Wire 1358H
$23.35
$23.15
$22.70
$22.25
$22.05
$21.95
$21.90
$21.60
Stg Gallery 714, 1291H
$25.86
$25.66
$25.21
$24.76
$24.56
$24.46
$24.41
$24.11
Stg Gallery 144
$40.10
$39.90
$39.45
$39.00
$38.80
$38.70
$38.65
$38.35
Stg Grain
$3.07
$2.52
$1.96
$1.63
$1.34
$1.21
$0.95
$0.70
Stg Deox Grain
$3.74
$3.24
$2.84
$2.18
$1.85
$1.75
$1.60
$1.40
STHRBD15PP
$39.10
$38.90
$38.45
$38.00
$37.80
$37.70
$37.65
$37.35
STHRBD20PP
$23.36
$23.16
$22.71
$22.26
$22.06
$21.96
$21.91
$21.61
STHRBD25PP
$20.60
$20.40
$19.95
$19.50
$19.30
$19.20
$19.15
$18.85
STHRBD30PP & 35 PP
$15.84
$15.64
$15.19
$14.74
$14.54
$14.44
$14.39
$14.09
STHFBD40PP
$15.19
$14.99
$14.54
$14.09
$13.89
$13.79
$13.74
$13.44
STHRBD50PP & PPH
$15.10
$14.90
$14.45
$14.00
$13.80
$13.70
$13.65
$13.35
STHRBD40PPS
$15.39
$15.19
$14.74
$14.29
$14.09
$13.99
$13.94
$13.64
STHRBD50PPS
$15.30
$15.10
$14.65
$14.20
$14.00
$13.90
$13.85
$13.55
Stg Patterned
$6.78
$6.23
$5.38
$4.83
$4.63
$4.53
$4.48
$4.03
STSCRAPA
$3.10
$2.55
$1.55
$1.05
$0.85
$0.75
$0.70
$0.40
STSCRAPB & C
$2.95
$2.40
$1.40
$0.90
$0.70
$0.60
$0.55
$0.30
STSTP (Step Bzl)
$7.74
$7.19
$6.19
$5.64
$5.44
$5.34
$5.29
$4.99
Argentium RD Wire 18ga
$7.80
$6.85
$5.85
$5.65
$5.30
$5.15
$5.15
$5.15
Argentium RD Wire 20-24ga
$8.20
$7.25
$6.25
$6.05
$5.70
$5.55
$5.55
$5.55
Argentium RD Wire 26-28ga
$8.30
$7.35
$6.35
$6.15
$5.80
$5.65
$5.65
$5.65
Argentium SQ,HR Wire 18ga
$8.70
$7.90
$7.30
$6.80
$6.40
$6.25
$6.25
$6.25
Argentium SQ,HR Wire 20-22ga
$8.90
$8.10
$7.50
$7.00
$6.60
$6.40
$6.40
$6.40
AG Sheet & PL Strip
$6.50
$6.20
$5.20
$4.85
$4.68
$4.55
$4.40
$4.00
AG Ser BEZ
$6.85
$6.35
$5.35
$5.00
$4.83
$4.70
$4.65
$4.25
AG SC BEZ
$6.99
$6.50
$5.50
$5.15
$4.98
$4.85
$4.80
$4.40
AG SER Ribbed Bzl
$7.54
$6.99
$5.99
$5.44
$5.24
$5.14
$5.09
$4.79
AG Rd 12ga to 20ga
$5.57
$5.02
$4.52
$3.82
$3.50
$3.37
$3.22
$3.01
AG Rd 21ga to 26ga
$6.02
$5.47
$4.97
$4.27
$3.95
$3.80
$3.57
$3.40
SOLDERS - SEE PAGE 216 - ONLY sheet and wire solders will combine with above listed goods for quantity price breaks.
Selling your precious metal scrap
Preparation — You will need:
• A magnet (to get out iron filings).
• A kitchen strainer (to sift out filings).
• Pen and paper
• Heavy plastic bags (to ship the scrap).
1 Separate the scrap by alloy and quality class.
There are three quality classes:
• Class A: unsoldered, unheated, clean.
• Class B: Soldered/heated, free of adhesives,
base metal findings, and stones.
• Class C: Cast jewelry, sprues, solders, filings,
and jewelry with base metal findings.
2 Package and label the scrap.
3 Write a letter of instruction with your scrap, including your name, address, phone number(s),
and customer number. Be sure to tell us how to
apply the value of your scrap.
4 Ship the parcel to this address:
I.J.S., 601 East Coal Avenue
Gallup, NM 87301-6005
Your scrap value will be credited according to
the precious metals quotes of the day that the
scrap was received at I.J.S. The value of sterling
and fine silver scrap, or karat gold scrap, is
higher when you trade it to us for merchandise rather than cash. That higher value also
applies when scrap is given in full or partial
payment of an open account. When scrap is received to pay for a shipment of precious metals
in transit, that scrap will be credited according
to the market of the outstanding shipment.
We pay a percentage of the daily Handy and
Harman BASE silver quote:
•Fine Bullion (identifiable coins/bars)
– 75% trade, 60% cash
•Silver Coinage – 70% trade, 55% cash
•Class A/B sterling/fine
•Class C sterling/fine
Scrap Goldfilled Materials
(including filings)
Harman BASE gold quote, cash or trade:
1/20 12K goldfilled – 1.45%
Scrap Silverfilled - Trade Only
25% silverfilled scrap is credited at 7% of the
Handy and Harman BASE silver quote.
10% silverfilled scrap is credited at 3% of the
Handy and Harman BASE silver quote.
If 10% and 25% silverfilled are intermixed, the
entire lot will be credited as 10% silverfilled.
Scrap Karat Golds - Trade Only
Harman BASE gold quote. The quote is a price
per troy ounce, and the percentages below are
prices paid per pennyweight.
•Class A 14K (per pennyweight)
2% of daily H&H BASE gold quote.
•Class B 14K (per pennyweight)
1.8% of daily H&H BASE gold quote.
•Class C 14K (per pennyweight)
NON-14K? USE THESE MULTIPLIERS AGAINST
14K PERCENTAGES PAID
24K ------- 1.7143 12K ------- .85
20K ------- 1.4286 10K --------.7143
18K ------- 1.2857 8K -------- .5714
16K ------- 1.142
6K -------- .4286
14K ------- 1.000
4K -------- .2857
Scrap lots over $1,000.00 US
•FOR CASH: IJS pays a maximum of $1,000.00 per person per day for scrap. For scrap
valued in excess of $1,000.00, the payment is spread out, $1,000.00 per business day at
that day’s market until the value is completely consumed.
•FOR TRADE: IJS credits the full money amount to your account, valued at the market quote
on the day of the scrap’s acceptance.
These and all other terms may change without notice, based upon prevailing economic
conditions.
Help
pfu
full Coonveersiion
ns: Weights
• ONE TROY OUNCE
= 31.1035 grams
= 1.0971 avoirdupois ounces
= 0.0686 avd. ounds
= 20 pennyweights (dwts.)
• ONE PENNYWEIGHT
= .05 troy ounces
= 1.56 grams
• ONE GRAM
= 5 carats
= 0.64103 pennyweights (dwts)
= .03527 avoir. ounces
= 0.03215 troy ounces
• ONE AVOIRDUPOIS OUNCE
= .91146 troy ounces
= 28.3495 g
= .0625 lb.
• ONE AVOIRDUPOIS POUND
= 453.592 grams
Help
pfu
ul Converrsioons: Measures
• ONE INCH
= 25.4 millimeters
= 2.54 centimeters
=.254 decimeters
= .0254 meters
• ONE YARD
= 36 inches
= 914.4 millimeters
• ONE MILLIMETER
=.03937 inch
METALS
When scrap is presented for sale to Indian
Jewelers Supply Co which has not been adequately quality-graded, the lower value will be
applied. When our personnel find non-precious
metal items in the scrap, the entire lot may be
rejected. IF YOU SUBMIT SUCH ITEMS, AND
WANT THEM RETURNED, YOU MUST PAY FOR
THE SHIPPING.
Scrap Silver
215
216 Sterling Silver and Fine Silver
G E N E R A L I N F O R M AT I O N , S I LV E R S O L D E R S , S H E E T
AND
WIRE
Name
Composition
Application
Joint Color
MELT/FLOW (ºF)
MELT/FLOW (ºC)
Easy-Flo #30
30% Ag, 27% Cu, 23% Zn, 20% Cd*
Nickel, copper, goldfilled, brass
Light yellow
1125/1310°F
608/711°C
Easy-Flo #45
45% Ag, 15% Cu, 16% Zn, 24% Cd*
Nickel, copper, goldfilled, brass
Light yellow
1125/1145°F
608/619°C
Braze 560
56% Ag, 22% Cu, 17% Zn, 5% Sn
Silver, nickel
White
1145/1205ºF
620/650ºC
Braze 650
65% Ag, 20% Cu, 15% Zn
Silver, nickel
White
1240/1325ºF
670/720ºC
Braze 700
70% Ag, 20% Cu, 10% Zn
Silver, nickel
White
1275/1360ºF
690/740ºC
Braze 750
75% Ag, 22% Cu, 3% Zn
Silver, nickel
White
1365/1450ºF
740/790ºC
Ag = Silver, Cu = Copper, Zn = Zinc, Cd = Cadmium, Sn = Tin
Generally, higher silver content indicates higher melt/flow point for the solder in question. An exception exists with Easy-Flo 30.
Higher flow temperature of Easy-Flo 30, in comparison with Easy-Flo 45, is attributed to the higher zinc content of Easy-Flo 30.
S I LV E R P R I C E A D D - O N S — S I LV E R S O L D E R S ,
OR
BRAZING ALLOYS
METALS
Prices listed below are to be added to the daily Handy and Harman silver quote. All items on this list, and those listed on page 211, combine for quantity
price discounts. Prices effective 1 December, 2010 -- subject to change without notice. Price breaks awarded on total ounces purchased by one customer
on one order, delivered to one destination, FOB Gallup and Albuquerque stores.
Item No.
0+ oz.
5+ oz.
10+ oz.
25+ oz.
50+ oz.
100+ oz.
250+ oz.
500+ oz.
SLD30WR
SLD45WR
SLD56SH
SLD56WR
SLD65SH
SLD65WR
SLD70SH
SLD70WR
SLD75SH
SLD75WR
$2.22
$1.77
$1.32
$1.02
$0.82
$0.67
$0.62
$0.17
$2.82
$2.37
$1.92
$1.62
$1.42
$1.27
$1.22
$0.77
$4.97
$4.52
$4.07
$3.87
$3.76
$3.62
$3.57
$2.79
$3.14
$2.69
$2.24
$2.04
$1.84
$1.69
$1.64
$0.95
$5.39
$4.94
$4.49
$4.29
$4.27
$4.04
$3.99
$3.21
$3.40
$2.95
$2.50
$2.30
$2.10
$1.95
$1.90
$1.18
$5.82
$5.37
$4.92
$4.72
$4.70
$4.52
$4.47
$3.72
$4.08
$3.63
$3.18
$2.98
$2.78
$2.63
$2.58
$1.90
$6.23
$5.78
$5.33
$5.13
$5.06
$5.03
$4.98
$4.20
$4.47
$4.02
$3.57
$3.37
$3.17
$3.02
$2.97
$2.29
W I R E S I LV E R S O L D E R S
GA
Name
Flow Temp
Item No.
Weight / ft
Feet / oz.
Min Sale
20
Easy-Flo #30 1125°F/608°C
Melt Temp
1310°F/711°C
SLD30WR
0.042 oz
23.8 ft
10 ft
20
Easy-Flo #45 1125ºF/608°C
1145°F/619°C
SLD45WR
0.045 oz
22.2 ft
10 ft
20
Braze 560
1145ºF/620ºC
1205ºF/650ºC
SLD56WR
0.0463 oz
21.6 ft
10 ft
16
Braze 560
1145ºF/620ºC
1205ºF/650ºC
SLD56WR16 0.124 oz
8.0 ft
10 ft
22
Braze 560
1145ºF/620ºC
1205ºF/650ºC
SLD56WR22 0.0463 oz
33.3 ft
10 ft
20
Braze 650
1240ºF/670ºC
1325ºF/720ºC
SLD65WR
21.0 ft
10 ft
22
Braze 650
1240ºF/670ºC
1325ºF/720ºC
SLD65WR22 0.032 oz
31.3 ft
10 ft
20
Braze 700
1275ºF/690ºC
1360ºF/740ºC
SLD70WR
0.048 oz
20.8 ft
10 ft
20
Braze 750
1365ºF/740ºC
1450ºF/790ºC
SLD75WR
0.05 oz
20.0 ft
10 ft
2 ” S T R I P / S H E E T S I LV E R S O L D E R S
0.0477 oz
- No Cadmium Content!
GA
Name
Melt Temp
Flow Temp
Item No.
Weight / 2”x4” Length / oz. Min Sale
30
Braze 560
1145ºF/620ºC
1205ºF/650ºC
SLD56SH
0.412 oz.
2” X 9.7”
2” x 4”
30
Braze 650
1240ºF/670ºC
1325ºF/720ºC
SLD65SH
0.416 oz.
2” X 9.6”
2” x 4”
30
Braze 700
1275ºF/690ºC
1360ºF/740ºC
SLD70SH
0.420 oz.
2” X 9.5
2” x 4”
30
Braze 750
1365ºF/740ºC
1450ºF/790ºC
SLD75SH
0.424 oz.
2” X 9.4”
2” x 4”
S I LV E R S O L D E R S — P A S T E
In 10cc syringes, one-half troy ounce (15.55 g) of finely granulated solder, mixed with flux. Syringe ships with
two blunt needles, one large, one small. The unit price will be based on a percentage of the daily H&H Base
Silver Market Quote. PRICES BELOW ARE COMPUTED ON A MARKET OF $20.03 Paste solder syringes
do not combine with other silver products for quantity pricing, as they are not sold by weight. Different paste
solders do not combine for quantity price breaks. *Cadmium Content.
Sold per Syringe
Description: Similar to -
Item No.
Price 1+
Price 12+
Easy-Flo 45*
242-S45H
$17.33
$16.01
Braze 560
242-S56H
$17.89
$16.57
Braze 650
242-S65H
$19.03
$17.71
Braze 700
242-S70H
$19.59
$18.27
Braze 750
242-S75H
$20.43
$18.89
Karat Golds
18K YELLOW GOLD SHEET - 3”
WIDE
GA
Weight 3” x 12”
Weight 3” x 1”
Item No.
Min Sale
22
147 dwt.
12.27 dwt.
AU18KSH22
3” x 1/4”
14K YELLOW GOLD SHEET - 3”
WIDE
GA
Weight 3” x 12”
Weight 3” x 1”
Item No.
Min Sale
16
247 dwt.
20.55 dwt.
AU14KSH16
3” x 1/4”
18
194 dwt.
16.18 dwt.
AU14KSH18
3” x 1/4”
20
148 dwt.
12.34 dwt.
AU14KSH20
3” x 1/4”
22
121 dwt.
10.45 dwt.
AU14KSH22
3” x 1/4”
24
94 dwt.
7.82 dwt.
AU14KSH24
3” x 1/4”
26
76 dwt.
6.36 dwt.
AU14KSH26
3” x 3/8”
GAUGE
GA
AUGE
28
60 dwt.
4.96 dwt.
AU14KSH28
3” x 1/2”
16
30
50 dwt.
4.14 dwt.
AU14KSH30
3” x 1/2”
32
40 dwt.
3.33 dwt.
AU14KSH32
3” x 1/2”
3
3”” SHE
SHEET
EET GAUGE
18
20
METALS
Cuttin
ng Kara
at Go
old Sheets
22
IJS can cut your sheet to size the 3” way when the layout leaves us no
scrap, at no additional charge.
If you need a square 2-1/2” x 2-1/2”, remember that you must also
purchase the 1/2” x 2-1/2” scrap left from the cut.
Examples of acceptable cuts: 1 piece 3 x 1/2”, or 2 pieces 1-1/2” x 1”.
24
26
28
30
32
Do you need 6” bracelet lengths? We can begin with a 6 x 3” sheet, and
cut pieces 6” long at your desired width. You won’t need to purchase the
whole 6 x 3” piece.
Examples: 1 piece 6 x 1/4”, or 2 pieces 6 x 1/4”.
14K YELLOW GOLD STRIP BEZEL
GA
Width
Weight / ft.
217
Weight / in.
Item No.
Min Sale
Gold Plain Strip
28
3/32”
1.8 dwt.
0.15 dwt.
AU14K28X332P
3/32 x 6”
30
3/32”
1.52 dwt.
0.127 dwt.
AU14K30X332P
3/32 x 8”
26
1/8”
3.42 dwt.
0.29 dwt.
AU14K26X18P
1/8 x 4”
28
1/8”
2.41 dwt.
0.20 dwt.
AU14K28X18P
1/8 x 5”
30
1/8”
2.04 dwt.
0.17 dwt.
AU14K30X18P
1/8 x 5”
32
1/8”
1.57 dwt.
0.13 dwt.
AU14K32X18P
1/8 x 8”
26
3/16”
4.95 dwt.
0.4125 dwt.
AU14K26X316P
3/16 x 3”
28
3/16”
3.60 dwt.
0.30 dwt.
AU14K28X316P
3/16 x 4”
30
3/16”
3.00 dwt.
0.25 dwt.
AU14K30X316P
3/16 x 4”
1/8” x 7”
PLAIN STRIP
SERRATED BEZEL
Gold Serrated Bezel, processed by I.J.S.
30
1/8”
1.67 dwt.
0.14 dwt.
AU14K30X18SER
30
3/16”
2.84 dwt.
0.24 dwt.
AU14K30X316SER 3/16” x 4”
Gold Scalloped Bezel, processed by I.J.S.
30
1/8”
1.78 dwt.
0.15 dwt.
AU14K30X18SC
1/8” x 6”
30
3/16”
2.79 dwt.
0.23 dwt.
AU14K30X316SC
3/16” x 4”
SCALLOPED BEZEL
A - GALLERY BEZEL
1 4 K Y E L L O W G O L D G A L L E RY B E Z E L
Height
Inches / dwt.
Weight / in.
Item No.
Min Sale
A
0.188”
3.5”
0.283 dwt
AU14KGA318
2 in.
B
0.177”
3.875”
0.258 dwt
AU14KGA714
2 in.
C
0.201”
3.0”
0.333 dwt
AU14KGA559
2 in.
B - GALLERY BEZEL
C - GALLERY BEZEL
218
Karat Golds
14K YELLOW GOLD SEAMLESS TUBING
14k Yellow Gold Seamless Tubing
GAUGE
I.D.
O.D.
WALL
GA
9
.114”
.082”
26 ga.
10
.101”
.076”
28 ga.
12
.081”
.061”
30 ga.
14
.064”
.044”
30 ga.
O.D.
I.D.
Wall
Weight / ft.
Weight / in.
Item No.
Min Sale
9
.114”
.082”
26 ga. 8.0 dwt
0.67 dwt.
AU14KTB09
2 in.
10
.101”
.076”
28 ga. 5.8 dwt
0.44 dwt.
AU14KTB10
3 in.
12
.081”
.061”
30 ga. 3.7 dwt
0.31 dwt.
AU14KTB12
3 in.
14
.064”
.044”
30 ga. 2.6 dwt
0.22 dwt.
AU14KTB14
4 in.
Weight / in.
Item No.
Min Sale
14K YELLOW GOLD WIRE
GA
Base
Height
Weight / ft.
Round Wire
LOW DOME
TRIANGLE
HALF-ROUND
SQUARE
ROUND
GAUGE
METALS
14k Yellow Gold wire gauges
10
0.102”
0.102”
13.02 dwt.
1.09 dwt.
AU14KRD10
1 in.
12
0.081”
0.081”
8.75 dwt.
0.73 dwt.
AU14KRD12
1 in.
14
0.064”
0.064”
4.63 dwt.
0.39 dwt.
AU14KRD14
3 in.
16
0.051”
0.051”
3.37 dwt.
0.28 dwt.
AU14KRD16
4 in.
18
0.040”
0.040”
2.06 dwt.
0.17 dwt.
AU14KRD18
6 in.
20
0.032”
0.032”
1.16 dwt.
0.10 dwt.
AU14KRD20
10 in.
22
0.025”
0.025”
0.80 dwt.
0.07 dwt.
AU14KRD22
15 in.
24
0.020”
0.020”
0.50 dwt.
0.04 dwt.
AU14KRD24
24 in.
4
Square Wire
4.5
10
0.101”
0.101”
16.74 dwt.
1.39 dwt.
AU14KSQ10
1 in.
5
12
0.081”
0.081”
10.47 dwt.
0.87 dwt.
AU14KSQ12
1 in.
6
14
0.060”
0.060”
5.74 dwt.
0.48 dwt.
AU14KSQ14
2 in.
16
0.051”
0.051”
4.07 dwt.
0.34 dwt.
AU14KSQ16
3 in.
18
0.040”
0.040”
2.56 dwt.
0.21 dwt.
AU14KSQ18
5 in.
8
8W
Half-round Wire
9
10
11
12
4
.204”
.102”
28.19 dwt.
2.35 dwt.
AU14KHR04
1 in.
6
.162”
.081”
17.00 dwt.
1.42 dwt.
AU14KHR06
1 in.
8
.128”
.064”
10.95 dwt.
0.91 dwt.
AU14KHR08
1 in.
8W
.128”
.064”
13.50 dwt.
1.13 dwt.
AU14KHR08W 1 in.
13
9
.114”
.057”
8.30 dwt.
0.69 dwt.
AU14KHR09
2 in.
14
10
.101”
.0505”
6.58 dwt.
0.55 dwt.
AU14KHR10
2 in.
16
12
.081”
.0405”
4.40 dwt.
0.37 dwt.
AU14KHR12
3 in.
18
14
.064”
.032”
2.69 dwt.
0.22 dwt.
AU14KHR14
5 in.
16
.051”
.0255”
1.75 dwt.
0.15 dwt.
AU14KHR16
7 in.
18
.040”
.020”
1.03 dwt.
0.09 dwt.
AU14KHR18
11 in.
1.23 dwt.
AU14KTR4
1 in.
19
20
Triangle Wire
20.5
21
22
4
0.175”
0.090”
14.80 dwt.
6
0.122”
0.095”
11.64 dwt.
0.97 dwt.
AU14KTR6
1 in.
8
0.112”
0.065”
5.69 dwt.
0.47 dwt.
AU14KTR8
2 in.
24
Low Dome Wire
14 GA BEAD WIRE
16 GA BEAD WIRE
18 GA BEAD WIRE
4
0.232”
0.070”
22.40 dwt
1.87 dwt.
AU14KLD4
1 in.
4.5
0.185”
0.067”
15.48 dwt
1.29 dwt.
AU14KLD45
1 in.
5
0.170”
0.040”
8.46 dwt
0.70 dwt.
AU14KLD5
2 in.
14K YELLOW GOLD FULL-ROUND BEAD WIRE
GA
Diameter
Weight / ft.
Weight / in.
Item No.
14
1.63mm
3.78 dwt
0.315 dwt
Min Sale
AU14KFRBD14 1-5/8 in.
16
1.27mm
2.38 dwt
0.198 dwt
AU14KFRBD16 2-1/2 in.
18
1.02mm
1.58 dwt
0.132 dwt
AU14KFRBD18 4 in.
Karat Golds
219
GOLD CASTING GRAINS
Karat
Color
Composition
Liquid at º
Solid at º
Item No.
Min. Sale
24K
Yellow
Commercially pure (.999 fine)
1945ºF / 1064ºC
18K
Yellow
75% Au, 15% Ag, 10% Cu
1715ºF / 527ºC
1620ºF / 475ºC
AU24KGRAIN
0.5 dwt.
AU18KYGRAIN
0.5 dwt.
18K
White
75.15% Au, 17.3% Ni, 5.47% Zn, 2.08% Cu
1750ºF / 955ºC
14K
Yellow
58.33% Au, 30% Cu, 6.67% Zn, and 5% Ag
1610ºF / 471ºC
1570ºF / 855ºC
AU18KWGRAIN
0.5 dwt.
1465ºF / 427ºC
AU14KYGRAIN
14K
White
58.33% Au, 22.1% Cu, 10.8% Ni, 8.77% Zn
0.5 dwt.
1800ºF / 983ºC
1720ºF / 939ºC
AU14KWGRAIN
0.5 dwt.
10K
Yellow
41.666% gold, balance copper, silver, zinc, silicon.
1635ºF
1475ºF
AU10KYGRAIN
0.5 dwt.
He
elp
pful Tip! Raising Gold Karat - common increases
EXAMPLE: 50 dwts. of 14K to 18K
Dwts. of karat available x (factor) = Dwts. of 24K needed
50 dwts. x 0.666 = 33.30 dwts. of 24K needed to achieve 18K.
18K YELLOW
18K WHITE
TO
FACTOR
FROM
TO
FACTOR
10K
14K
0.400
14K
18K
0.666
10K
18K
1.333
14K
22K
3.964
10K
22K
5.952
18K
22K
1.976
Help
pful Tip
p! Raising Gold Karat - calculations
EXAMPLE: 10 dwts of 12K gold to 14K
14K YELLOW
14K GOLD SCRAP
14K WHITE
1.
10K YELLOW
•
FOR CASTING
It is recommended that when SCRAP gold is being used in castings that it be
mixed with equal amounts of GRAIN. The grain has a higher zinc content that
helps reduce the potential for porosity in the casting.
Call for availability of other karats.
Class Caracteristics
Item No.
A
Unsoldered, unheated, clean.
AU14KSCRAPA
B
Soldered, heated.
AU14KSCRAPB
C
Has filings, sprues, etc.
AU14KSCRAPC
2.
•
•
•
3.
Start with the gold you have, and find the weight of the non-gold
portion.
12K = 50% gold, 50% non-gold (alloy)
Divide the alloy weight of the gold you have by the percentage of
alloy in the higher karat. The result is the total weight of the raised
karat.
5 dwt of alloy in 12K gold
14K = 58.33% gold, 41.67% alloy
5 ÷ 0.4167 = 11.99 dwts of 14K gold
From the total weight of the higher karat, subtract the total weight
of the lower karat. The result is the total weight of 24K gold
required to achieve the higher purity.
K A R AT G O L D M AT E R I A L S : P R I C E F A C T O R S
Multiply the daily Handy & Harman gold base quote by the appropriate factor. Price breaks awarded on total pennyweights (dwt) purchased by one customer
All products listed below combine with themselves, and products listed on page 219 for total weight purchased. Effective February 21, 2008
Karat
Fabrication
0+
10+
20+
50+
100+
200+
24K
Grain
0.0583
0.0575
0.0571
0.0566
0.0559
0.0550
18K
Sheet
0.0500
0.0495
0.0485
0.0475
0.0467
0.0462
18K
Grain
0.0480
0.0475
0.0464
0.0450
0.0440
0.0432
14K
Sheet & Strip
0.0398
0.0392
0.0382
0.0372
0.0362
0.0358
14K
Pattern Wire & Sheet
0.0400
0.0395
0.0385
0.0375
0.0370
0.0365
14K
Full Round Bead
0.0547
0.0533
0.0521
0.0507
0.0496
0.0490
14K
Round, Halfround, Triangle, Square, Low Dome Wires
0.0398
0.0392
0.0382
0.0372
0.0362
0.0358
14K
Gallery Wire
0.0583
0.0574
0.0565
0.0560
0.0556
0.0551
14K
Tube
0.0450
0.0445
0.0435
0.0425
0.0410
0.0405
14K
Grain
0.0385
0.0378
0.0368
0.0358
0.0345
0.0335
10K
Grain
0.0284
0.0273
0.0263
0.0252
0.0244
0.0242
Class
Fabrication
1+
10+
20+
50+
100+
200+
“A”
14K Scrap
0.0345
0.0340
0.0330
0.0320
0.0310
0.0305
“B”
14K Scrap
0.0330
0.0325
0.0315
0.0305
0.0295
0.0290
“C”
14K Scrap
0.0315
0.0310
0.0300
0.0290
0.0280
0.0275
METALS
24K YELLOW
FROM
220
Karat Golds
GRAINS
FOR
GOLD ALLOYING
Description
Item No.
MASTER ALLOY #383
Price per
Troy Ounce
Price per
Pennyweight
$7.25
$0.363
• Used to reduce 24K grain to 18-22k. Light yellow in color.
• Makes alloys suitable for casting and fabricating.
• Unsuitable for 10 or 14k.
AUMA383YGRAIN
• Silver Content
55.20%
• Melt temp for 18-22K
1640ºF or 895ºC
• Recommended casting temperature
1775ºF or 970ºC.
MASTER ALLOY #383
METALS
MASTER ALLOY #606
• For reducing 24K grain to 14-10k. Yellow color.
• Unsuitable for 18 or 22K.
AUMA606YGRAIN
• Silver Content
14.80%
• Melt temp for 14K
1625ºF/885ºC.
• Melt temp for 10K
1660ºF or 905ºC.
• Recommended casting temperature for 14k
1775ºF or 970ºC
• Recommended casting temperature for 10k
1835ºF or 1000ºC
$6.41
$0.321
Helpful Reference!
Reducing Gold Karat - common reductions
An easy formula for common karat reductions:
FROM
TO
ALLOY FACTOR
FROM
22K
Pennyweights of available gold x (factor, see table below) = Pennyweights of alloy required
TO
24K
18K
#383
0.333
24K
14K
#606
0.714
22K
10K
24K
10K
#606
1.400
22K
18K
Examples:
MASTER ALLOY #606
14K
ALLOY FACTOR
FROM
ALLOY
FACTOR
FROM
#606
0.571
18K
14K
#606
0.286
14K
#606
1.201
18K
10K
#606
0.800
#383
0.221
20 dwts of 24K to 18K:
10 dwts of 24K to 14K:
TO
TO
10K
ALLOY FACTOR
#606
0.400
20 x 0.333 = 6.66 dwts of MASTER ALLOY #383
10 x 0.714 = 7.14 dwts of MASTER ALLOY #606
Universal Formula For Karat Reductions
(Karat available - karat desired) x pennyweights of karat available ÷ karat desired = Pennyweights of alloy required
Example:
15 dwts of 24K to 22K
(24 - 22) x 15 ÷ 22 = (2) x 15 ÷ 22 = 30 ÷ 22 = 1.36 dwts of alloy #AUMA383YGRAIN
Help
pfu
ul Coonveerssions: Weights
• ONE TROY OUNCE
= 31.1035 grams
= 0.0686 avd. ounds
• ONE PENNYWEIGHT
= .05 troy ounces
• ONE GRAM
= 5 carats
= .03527 avoir. ounces
• ONE AVOIRDUPOIS OUNCE
= .91146 troy ounces
= .0625 lb.
• ONE AVOIRDUPOIS POUND
= 453.592 grams
Meettaallss T
M
Met
Teec
ecchn
ech
hni
nic
icall D
Daat
attaa — Pr
Prrec
Prec
eci
cious
ious Metal
Mettal
als
ls
= 1.0971 avoirdupois ounces
= 20 pennyweights (dwts.)
= 1.56 grams
= 0.64103 pennyweights (dwts)
= 28.3495 g
= ºF
= ºC
= ºC
• 10K YELLOW GOLD: 41.666% gold. Balance is copper, silver,
zinc, silicon. Melt point 1635ºF.
• 14K YELLOW GOLD: 58.33% gold, 8.3% silver, 29.2% copper,
4.17% zinc. Melt point 1615ºF.
8.77% Zinc. Melt point 1800ºF/983ºC
• 18K YELLOW GOLD: 75% gold, 15% silver, 10% copper.
Melt point 1715ºF/527ºC.
= 2.54 centimeters
= .0254 meters
= 914.4 millimeters
• 18K WHITE GOLD: 75.15% gold, 17.3% Nickel, 5.47% Zinc, 2.08%
Copper. Melt point 1750ºF/955ºC.
• 24K GOLD GRAIN (9999 fine)
• MASTER ALLOY #383 - used to reduce karat to 18-22K. Melt temp
Help
pfu
ul Coonveerssions: Temperatures
Degrees Fahrenheit
Degrees Celsius
Degrees Centigrade
• FINE SILVER: 99.9% silver. Melting point 1761ºF.
• 14K WHITE GOLD: 58.33% gold, 22.1% Copper, 10.8% Nickel,
Help
pfu
ul Coonveerssions: Measures
• ONE INCH
= 25.4 millimeters
=.254 decimeters
• ONE YARD
= 36 inches
• ONE MILLIMETER
=.03937 inch
• STERLING SILVER: 92.5% silver, 7.5% copper. Melts at 1640ºF
= (1.8 x ºC) + 32
=.556 x (ºF - 32)
=.556 x (ºF - 32)
at 18-22K is 1640ºF or 895ºC. Recommended casting temperature
is 1775ºF or 970ºC. Silver Content is 55.20%.
• MASTER ALLOY #606 - used to reduce 24K grain to 14-10k.
Melt temp at 14K is 1625ºF or 885ºC. Melt temp at 10K is 1660ºF
or 905ºC. Recommended casting temp for 14k is 1775ºF or 970ºC.
Recommended casting temp for 10k is 1835ºF or 1000ºC.
Silver Content is 14.80%.
Karat Golds
221
K A R AT G O L D S O L D E R S
Karat
Color
Rating
Melt Range
Item No.
Sheet Solders
Weight / in.
Min. Sale
Full piece is 15/16” wide, 3-1/4” long, ±5 dwt. *Contains Cadmium
Super E.Z.* 1125-1200ºF (608-649ºC)
AU14YEES
1.538 dwts. 15/16” x 5/8” (1 dwt.)
Yellow
Hard
1450-1475ºF (788-802ºC)
AU14YHS
1.538 dwts. 15/16” x 5/8” (1 dwt.)
White
Easy
1225-1325ºF (663-719ºC)
AU14WES
1.538 dwts. 15/16” x 5/8” (1 dwt.)
18K
Yellow
Soft*
1300-1400ºF (705-761ºC)
AU18YEMS 1.538 dwts. 15/16” x 5/8” (1 dwt.)
10K
Yellow
Easy*
1200-1275ºF (649-691ºC)
AU10YEES
10K
White
Easy
1250-1350ºF (677-733ºC)
AU10WHES 1.538 dwts. 15/16” x 5/8” (1 dwt.)
14K
Yellow
14K
14K
1.538 dwts. 15/16” x 5/8” (1 dwt.)
Continuous Strips, 1/2” Wide
*Contains Cadmium
30 8.11K
Yellow
Easy*
1165-1275ºF (630-691ºC)
AU08YEES
34 14K
Yellow
Medium
1300-1350ºF (705-733ºC)
AU14YEMS 0.424 dwts. 1/2 x 1/2”
Yellow
Super E.Z.* 1125-1200ºF (608-649ºC)
AU14YEEW 0.86 dwt
6” piece
20 14K
Yellow
Medium
1300-1350ºF (705-733ºC)
AU14YEMW 1.29 dwt
6” piece
20 8.11K
Yellow
Easy*
1165-1275ºF (630-691ºC)
AU08YEEW 1.20 dwt
6” piece
20 10K
Yellow
Easy*
1200-1275ºF (649-691ºC)
AU10YEEW
6” piece
0.610 dwts. 1/2 x 1/2”
Wire
22 14K
*Contains Cadmium
Paste
14K
METALS
1.14 dwt
*Contains Cadmium
Easy*
1120/1185ºF
242-S14K
1 dwt. syringe
WARNING! *CADMIUM
Cadmium is considered a health hazard! Fumes are poisonous, do not breathe them. Even brief exposures
to high concentrations should be avoided. Keep children away when using these brazing alloys. Use only
with enough ventilation, exhaust at the work, or both to keep the fumes from your breathing zone and the
general area. If this cannot be done, use air supplied respirators. Failure to do so can result in exposure in
excess of limits recommended by AGDIH-OSHA. If chest pain, shortness of breath, cough, or fever develop
after use, get medical help immediately.
For the free Material Safety Data Sheet applying to the items you use, put in a request on your order for
MSDS#(item number).
Example: MSDS #242-S14K, 14K Yellow easy paste solder.
He
elpfful Tip! HANDY FACTS:
One dwt = 1.56 grams
How does the letter “d” mean “penny”?!? By way of the dinarius, and/or the dinar!
K A R AT G O L D S O L D E R S : P R I C E F A C T O R S
Multiply the daily Handy & Harman gold base quote by the appropriate factor. Price breaks awarded on total pennyweights (dwt) purchased by one customer
All products listed below combine with themselves, and products listed on page 217 for total weight purchased. Effective December 6, 2010
Karat
Fabrication
0+
10+
20+
50+
100+
200+
8K
Solder Wire & Sheet
0.0310
0.0300
0.0290
0.0280
0.0275
0.0270
10K
Solder Wire & Sheet
0.0400
0.0390
0.0380
0.0375
0.0370
0.0365
14K
Wire Solder
0.0428
0.0423
0.0418
0.0415
0.0412
0.0410
14K
Sheet Solder
0.0480
0.0475
0.0470
0.0465
0.0460
0.0456
14K
PASTE SOLDER
0.0420
0.0410
0.0400
0.0390
0.0385
0.0380
18K
Sheet Solder
0.0635
0.0625
0.0615
0.0610
0.0605
0.0600
Trade amounts are based on a percentage of the daily Handy and Harman BASE gold quote. The quote is a price per troy ounce, and the percentages below are prices paid per pennyweight.
•Class A 14K (per pennyweight)
•Class B 14K (per pennyweight)
•Class C 14K (per pennyweight)
2% of daily H&H BASE gold quote.
age 21
15 for step by step details on how to submit your Scrap Gold for trade
Look on pa
222
Gold & Silver Filled
W H AT
GOLDFILLED?
IS
A plywood of jewelry metal.
• It is a lamination of gold and #230 brass. The ratio of precious
to composition metal, by weight, is expressed with a percent
age. Our gold laminates are stocked in 1/20-12K, 1/20-14K,
1/10-14K, and 1/10-10K.
GOLD LAYER
• Since the precious metal layer is thin, care must be taken not
to burn or polish through it when soldering or buffing. For the
best finished appearance, the jewelry should be plated after all
other finishing has been done.
• In handling this material, we attempt to label only the precious
side with gauge marks. When in doubt, a drop of concentrated
nitric acid can be used to test. The acid will have a greenish,
boiling reaction on the composition metal, and little reaction to
the gold.
COMPOSITE LAYER
1/20 12K GOLDFILLED STRIP
METALS
GA
Weight 1” x 3”
Weight 6” x 3”
Size / oz.
Item No.
Yellow Goldfilled - SINGLE-CLAD:
Stocked in 3” wide coils, or cut-to-size.
5% layer of 12K gold (by weight) on red brass CDA #230.
GAUGE
GA
AUGE
S
STRIP
TRIP
P
20
22
20
0.46 oz.
2.76 oz.
3 x 1/2”
GFSH20
22
0.365 oz.
2.19 oz.
3 x 3/4”
GFSH22
24
0.285 oz.
1.71 oz.
3 x 1”
GFSH24
26
0.225 oz.
1.35 oz.
3 x 1”
GFSH26
28
0.175 oz.
1.05 oz.
3 x 1-1/2”
GFSH28
30
0.145 oz.
0.87 oz.
3 x 1-3/4”
GFSH30
32
0.112 oz.
0.67 oz.
3 x 2-1/4”
GFSH32
34
0.090 oz.
0.54 oz.
3 x 3”
GFSH34
Yellow Goldfilled - DOUBLE-CLAD
Strip Stocked in 3” wide coils, or cut-to-size
24
Two 2.5% layers of 12K gold, making a total of 5% (by weight)
on red brass CDA #230.
26
28
24
0.285 oz.
1.71 oz.
3 x 1”
GFSH24D
30
26
0.225 oz.
1.35 oz.
3 x 1”
GFSH26D
32
Red/Rose Goldfilled - SINGLE-CLAD
Strip Stocked in 3” wide coils, or cut-to-size
34
Two 2.5% layers of 12K gold, making a total of 5% (by weight)
on red brass CDA #230.
Help
pful Info! Laminates Data
20
0.460 oz.
2.76 oz.
3 x 3/4”
GFSH20R
22
0.365 oz.
2.19 oz.
3 x 3/4”
GFSH22R
1/20 12K GOLDFILLED:
1/20 14K GOLDFILLED:
SOLDER FLUSH GOLDFILLED SHEET
1/10 10K “SOLDER FLUSH” GOLDFILLED SHEET
The gold layer accounts for 1/10, or 10% of the total weight. Coated with silver
solder on the opposite side, this sheet is used for applique. Cut out your designs
and enjoy the ease and speed of soldering them without annoying “float”. Solder melts at 1350ºF, flows at 1389ºF. Stocked in 3 x 36” sheets or cut-to-size.
Minimum sale is 3 x 3” of any color.
GA
Color
Weight
W
3” x 3”
Weight, Full Sheet Item No.
22
Yellow
Yel low
1.
1.07 oz. troy
12.86 oz. troy
GFSH2210KY
22
Rose
1.
1.06 oz. troy
12.72 oz. troy
GFSH2210KR
2
22
Green
Gre en
1.
1.10 oz. troy
13.30 oz. troy
GFSH2214KG
GREEN
YELLOW
ROSE
y Co
Co - Main Catalog Volume 2
Weight / Ft. Length / oz Min Sale
Round Wire, Soft Temper
10
0.101”
0.101”
GFRD10
0.45 oz
±2’ 3”
7 in
12
0.081”
0.081”
GFRD12
0.291 oz.
±3’ 5”
10 in
14
0.064”
0.064”
GFRD14
0.182 oz.
±5’ 6”
16 in
4
16
0.051”
0.051”
GFRD16
0.115 oz.
±8’ 8”
26 in
5
18
0.040”
0.040”
GFRD18
0.071 oz.
±12’ 1”
4 ft
6
20
0.032”
0.032”
GFRD20
0.046 oz.
±22’
6 ft
22
0.025”
0.025”
GFRD22
0.028 oz.
±36’
9 ft
24
0.020”
0.020”
GFRD24
0.019 oz.
±52’
14 ft
26
0.016”
0.016”
GFRD26
0.012 oz.
±83’
20 ft
223
LOW DOME
Item No.
TRIANGLE
Height
ROUND
Width
GAUGE
GA
HALF-ROUND
1/20 12K YELLOW GOLDFILLED WIRE
SQUARE
3
8
8W
10
11
Round Wire, Half-hard Temper
12
19
0.036”
0.036”
GFRD19HH
0.051 oz.
±20’
5 ft
20
0.032”
0.032”
GFRD20HH
0.046 oz.
±22’
6 ft
21
0.028”
0.028”
GFRD21HH
0.036 oz.
±27’
7 ft
14
22
0.025”
0.025”
GFRD22HH
0.028 oz.
±36’
9 ft
16
24
0.020”
0.020”
GFRD24HH
0.019 oz.
±52’
14 ft
18
13
4
0.204”
0.102”
GFHR04
0.975 oz.
1’
3 in
20
6
0.162”
0.081”
GFHR06
0.579 oz.
1’ 8.75”
5 in
21
8
0.128”
0.064”
GFHR08
0.393 oz.
2’ 6.5”
8 in
22
8W
0.128”
0.064”
GFHR08W
0.496 oz.
2’
6 in
10
0.101”
0.050”
GFHR10
0.214 oz.
4’ 8”
14 in
12
0.081”
0.040”
GFHR12
0.144 oz.
6’ 11”
20 in
14
0.064”
0.032”
GFHR14
0.092 oz.
10’ 10.5”
3 ft
16
0.051”
0.025”
GFHR16
0.056 oz.
17’ 10”
4 ft
20
0.032”
0.016”
GFHR20
0.026 oz.
38’ 4”
10 ft
Half-round Wire, half-hard temper
18
0.040”
0.020”
GFHR18HH
0.036 oz.
28’
14 ft
2’ 9”
8 in
Square Wire, Soft Temper
12
0.081”
0.081”
GFSQ12
0.364 oz.
14
0.064”
0.064”
GFSQ14
0.232 oz.
4’ 3-3/4”
13 in
16
0.051”
0.051”
GFSQ16
0.136 oz.
7’ 4”
22 in
18
0.040”
0.040”
GFSQ18
0.092 oz.
11 ft
6 ft
20
0.032”
0.032”
GFSQ20
0.058 oz.
17 ft
9 ft
22
0.025”
0.025”
GFSQ22
0.036 oz.
28 ft
14 ft
24
0.020”
0.020”
GFSQ24
0.024 oz.
42 ft
21 ft
11 ft
6 ft
Square Wire, Half-hard Temper
18
0.040”
0.040”
GFSQ18HH
METALS
19
Half-round Wire, soft temper
0.092 oz.
20
0.032”
0.032”
GFSQ20HH
0.058 oz.
17 ft
9 ft
21
0.028”
0.028”
GFSQ21HH
0.044 oz.
23 ft
12 ft
22
0.025”
0.025”
GFSQ22HH
0.036 oz.
28 ft
14 ft
24
0.020”
0.020”
GFSQ24HH
0.024 oz.
42 ft
21 ft
Triangle Wire
4
0.175”
0.090”
GFTR4
0.55 oz.
22 in.
6 in
6
0.122”
0.095”
GFTR6
0.44 oz
27 in.
7 in
8
0.080”
0.064”
GFTR8
0.21 oz.
57 in.
14 in
Low Dome Wire
24
Yellow Gold wire gauges
Wire Coiling Charges: Applied to orders when two or more coils,
under 5 ounces each, of a single gauge are requested.
Charge is $.50 per coil.
1) One 4-ounce coil of 22 ga. round wire and one 2-ounce coil of 20 ga.
half-round wire will not incur a coiling charge.
2) Five 3-ounce coils of 22 ga. round sterling silver wire:
5 coils x $ .50 = $2.50 coiling charge.
Item number on your invoice will be “COILCHARGE”.
1/20 14K YELLOW GOLDFILLED WIRE
GA
Width
Height
Item No.
Weight / Ft. Length / oz Min Sale
Round Wire, Half-hard Temper
18
0.040”
0.040”
GF14SQ18HH 0.091 oz.
11 ft
6 ft
20
0.032”
0.032”
16 ft
8 ft
21
0.028”
0.028”
21 ft
11 ft
22
0.025”
0.025”
26 ft
13 ft
24
0.020”
0.020”
42 ft
20 ft
28 FT
14 ft
Half-round Wire, half-hard temper
18
0.040”
0.020”
GF14HR18HH 0.036 oz.
20
0.032”
0.016”
43 FT
22 FT
21
0.028”
0.014”
60 FT
30 FT
22
0.025”
0.012”
67 FT
33 ft
Square Wire, Half-hard Temper
19
0.036”
0.036”
GF14RD19HH 0.046 oz.
22’
6 ft
20
0.032”
0.032”
22’
6 ft
3
0.412"
0.062”
GFLD3
1.052 oz
11.4 in.
3 in
21
0.028”
0.028”
27’
7 ft
4
0.232"
0.072”
GFLD4
0.746 oz
16.1 in
3 in
22
0.025”
0.025”
36’
9 ft
5
0.170"
0.040”
GFLD5
0.278 oz
43.16 in.
3 in
24
0.020”
0.020”
52’
13 ft
224
1/20 12K YELLOW GOLDFILLED STYLED WIRE
16 GA
Actual weight and price of materials supplied will vary from estimates.
GA
Width
Item No.
Weight / Ft.
Length / oz
Min Sale
Patterned
18 GA
PATTERNED WIRE
18 GA
16
0.161”
GFPA1
0.376 oz.
1 ft
18
0.308”
GFPA7
0.608 oz.
1 ft
18
GFTW18
0.1728 oz.
6 ft.
-
20
GFTW20
0.1068 oz.
9.5 ft
-
22
GFTW22
0.0560 oz.
17 ft.
-
24
GFTW24
0.0396 oz.
25 ft
-
Length / oz
Min Sale
Twist
20 GA
22 GA
24 GA
TWIST WIRE
METALS
26
28
0.082”
0.077”
O.D.
Tubes are cut to 12” or smaller lengths for shipping.
I.D.
GAUGE
1/20 12KY GOLDFILLED SEAMLESS TUBING
9 GA
GA
I.D.
O.D.
Item No.
Weight / Ft.
26
0.082”
9 ga.
GFTB09
0.30 oz.
3’ 4”
1 ft
28
0.077”
10 ga.
GFTB10
0.195 oz.
5’ 1-1/2”
1 ft
10 GA
GOLDFILLED SEAMLESS TUBING
1/20 12K YELLOW GOLDFILLED BEZEL STRIP
Actual weight and price of materials supplied will vary from estimates.
GA
Width
Style
Item No.
Weight / Ft.
Length / oz
Min Sale
4 ft
Plain
PLAIN BEZEL STRIP
SERRATED BEZEL STRIP
30
1/8”
Plain
GF30X18P
0.069 oz
14’ 6”
30
3/16”
Plain
GF30X316P
0.104 oz
9’ 7-3/8”
3 ft
34
5/32”
Plain
GF34X532P
0.056 oz
17’ 10-1/4”
5 ft
30
1/8”
Serrated
GF30X18SER
0.061 oz
16’ 4-3/4”
4 ft
30
3/16”
Serrated
GF30X316SER
0.100 oz
10’
3 ft
30
1/8”
Scalloped
GF30X18SC
0.059 oz
16’ 11-3/8”
4 ft
30
3/16”
Scalloped
GF30X316SC
0.097 oz
10’ 4”
3 ft
SCALLOPED BEZEL STRIP
G O L D F I L L E D M AT E R I A L S : P R I C E F A C T O R S
Column headings are total troy ounces purchased by one customer on one order, delivered to one destination, FOB Gallup, NM and Albuquerque, NM stores.
Factors are multiplied by the daily Handy and Harman base gold quote to give price per troy ounce. Effective 21 June 2010
Karat GF
Description
0+
5+
10+
25+
50+
100+
14KGF
Round
0.0486
0.0435
0.0424
0.0413
0.0405
0.0395
14KGF
Half Round & Square
0.0523
0.0465
0.0456
0.0445
0.0436
0.0426
12KGF
Round 12-24 Ga
0.0413
0.0364
0.0358
0.0348
0.0341
0.033
12KGF
Round 26 Ga
0.0432
0.0381
0.0374
0.0363
0.0356
0.035
12KGF
Half Round 4-18 Ga
0.0459
0.0404
0.0395
0.0384
0.0377
0.037
12KGF
Twist & Half Round 20 ga. & lighter
0.0485
0.0427
0.0416
0.0405
0.0397
0.039
12KGF
Square 24 ga and heavier
0.0435
0.0415
0.0405
0.0395
0.0387
0.0375
12KGF
Square 26 ga.
0.0447
0.0427
0.0416
0.0405
0.0397
0.0385
12KGF
Low Dome, Triangle, Pattern
0.0475
0.0417
0.0407
0.0397
0.0389
0.038
12KGF
Tube
0.0554
0.0547
0.0536
0.0523
0.0506
0.049
12KGF
Sheet 30 ga. and heavier
0.0393
0.0346
0.0342
0.0332
0.0326
0.032
12KGF
Sheet 32-34 Ga
0.0413
0.0364
0.0358
0.0348
0.0341
0.0335
12KGF
Plain Strip
0.0419
0.0369
0.0363
0.0353
0.0346
0.034
12KGF
Scal & Ser Strip
0.0512
0.0446
0.0414
0.0403
0.0396
0.039
12KGF
Strip 34 Ga
0.0413
0.0364
0.0358
0.0348
0.0341
0.0335
12KGF
Strip 36 Ga
0.0432
0.0381
0.0374
0.0363
0.0356
0.035
10KGF
Solder Flush Sheet
0.0663
0.062
0.0615
0.06
0.0585
0.057
12KGF
Sheet Single-Clad Rose
0.0406
0.0358
0.0353
0.0343
0.0336
0.033
12KGF
Sheet Double-Clad Yellow
0.0406
0.0358
0.0353
0.0343
0.0336
0.033
14KGF
Solder Flush Sheet
0.083
0.081
0.079
0.077
0.075
0.0735
What Is Silv
verfilled,, or Ste
erling
g Overlay?
? A plywood of jewelry
y metall.
•
•
•
225
It is a lamination of sterling silver and #752 nickel. The ratio of precious to composition metal, by weight, is expressed with a percentage.
We stock 10% and 25% silverfilled.
Since the precious metal layer is thin, care must be taken not to burn or polish through it when soldering or buffing. For the best finished
appearance, the jewelry should be plated after all other finishing has been done.
In handling this material, we endeavour to label only the precious side with gauge marks. When in doubt, a drop of nitric acid can be used
to test. The acid will have a greenish, boiling reaction on the composition metal, and little or no reaction to the precious metal.
2 5 % S I LV E R F I L L E D S H E E T , SINGLE-CLAD
One quarter (25%) of the sheet weight is sterling silver, bonded to nickel
CDA#752. Sold in full or half-sheets only, 36 or 18” long, respectively.
GA
Silver Thickness Item No.
weight / 18” length Weight / 36” length
6” wide Sheet
16
0.0102”
SF25SH16
27.15 oz.
54.30 oz.
18
0.0080”
SF25SH18
20.80 oz.
41.60 oz.
20
0.0064”
SF25SH20
17.05 oz.
34.10 oz.
22
0.0050”
SF25SH22
13.38 oz.
26.75 oz.
0.0128”
SF25SH14N
25.14 oz.
50.28 oz.
16
0.0102”
SF25SH16N
20.27 oz.
40.53 oz.
18
0.0080”
SF25SH18N
15.75 oz.
31.50 oz.
25% Silverfilled Sheet are sold by the oz
20
0.0064”
SF25SH20N
12.36 oz.
24.72 oz.
1+ 0z.
22
0.0050”
SF25SH22N
9.67 oz.
19.33 oz.
$9.11 per oz.
100+ oz.
500+ oz.
$8.47 per oz.
$7.71 per oz.
Prices were calculated on a Handy & Harman Base Silver Market Quote of $18.36. Prices are per troy ounce. All gauges of 25% silverfilled sheet will
combine for quantity breaks. Quantity price breaks are awarded by adding total weight of 25% silverfilled sheet ordered for delivery to one customer, at one
time, to one destination, FOB Gallup and Albuquerque stores. Not combinable with 10% silverfilled for quantity discounts.
Cutttin
ng to
o sizze
IJS can cut multiple pieces of a sheet, at no cost, where the cut is at least
1/2” long, at full sheet width. Charges will be levied on cutting under 1/2” at
full width, and on any further shearing of cut-to-length pieces. Each cut is 5¢,
billed as item number “CUT SHEET”.
1 0 % S I LV E R F I L L E D S H E E T , SINGLE-CLAD
10% (1/10) of the sheet weight is sterling silver, bonded to nickel CDA#752.
Sold in full or half-sheets only, 36 or 18” long, respectively.
GA
Silver Thickness Item No.
weight / 18” length Weight / 36” length
4-1/2” wide Sheet
14
0.006”
SF10SH14N
24.10 oz.
48.20 oz.
16
0.005”
SF10SH16N
19.53 oz.
39.05 oz.
18
0.004”
SF10SH18N
15.32 oz.
30.64 oz.
20
0.003”
SF10SH20N
12.27 oz.
24.54 oz.
1+ 0z.
100+ oz.
500+ oz.
22
0.002”
SF10SH22N
9.61 oz.
19.22 oz.
$5.17 per oz.
$4.81 per oz.
$4.50 per oz.
10% Silverfilled Sheet are sold by the oz
Prices were calculated on a Handy & Harman Base Silver Market Quote of $18.36. Prices are per troy ounce. All gauges of 10% silverfilled sheet will
combine for quantity breaks. Quantity price breaks are awarded by adding total weight of 10% silverfilled sheet ordered for delivery to one customer, at one
time, to one destination, FOB Gallup and Albuquerque stores. Not combinable with 25% silverfilled for quantity discounts.
THE WORKBENCH GUIDE
TO
J E W E L RY T E C H N I Q U E S
by Anastasia Young. Covers traditional metalsmithing skills and techinques for alternate
materials in expert detail. You will reach for these 320 colorful pages time and again.
Description
Item No.
Price
The wealth of information includes: tool-and-material
directory, advice on building a beginner’s kit, and a
comprehensive reference section.
200-BK1037
$34.95
METALS
4-1/2” wide Sheet
14
226
Metals Base
C O P P E R D I S C S - Punched by IJS in the US
GA
Diameter
Item No.
Price 1+
Price 100+
20 Gauge Discs
20
1/2”
CPC20X050
$0.24
$0.20
20
3/4”
CPC20X075
$0.36
$0.30
20
7/8”
CPC20X0875
$0.42
$0.35
20
1”
CPC20X100
$0.45
$0.38
20
1-1/4”
CPC20X125
$0.63
$0.53
20
1-1/2”
CPC20X150
$0.75
$0.63
20
1-3/4”
CPC20X175
$0.84
$0.70
$0.15
METALS
22 Gauge Discs
22
3/8”
CPC22X0375
$0.18
22
1/2”
CPC22X050
$0.21
$0.18
22
9/16”
CPC22X05625
$0.24
$0.20
22
5/8”
CPC22X0625
$0.27
$0.23
22
11/16”
CPC22X06875
$0.30
$0.25
22
3/4”
CPC22X075
$0.33
$0.28
22
13/16”
CPC22X08125
$0.36
$0.30
22
7/8”
CPC22X0875
$0.39
$0.33
22
1”
CPC22X100
$0.42
$0.35
22
1-1/8”
CPC22X1125
$0.48
$0.40
22
1-1/4”
CPC22X125
$0.57
$0.48
22
1-3/8”
CPC22X1375
$0.60
$0.50
22
1-1/2”
CPC22X150
$0.72
$0.60
22
1-3/4”
CPC22X175
$0.81
$0.68
22
2”
CPC22X200
$0.96
$0.80
3/8”
CPC24X0375
$0.15
Helpfu
ul Info!! Copper Data
COPPER (CDA #110) 99.9% copper.
Melting point 1981ºF
GA
Diameter
Item No.
Price 1+
Price 100+
26 Gauge Discs
26
5/16”
CPC26X03125
$0.09
$0.08
26
3/8”
CPC26X0375
$0.12
$0.10
$0.13
26
7/16”
CPC26X04375
$0.14
$0.11
1/2”
CPC26X050
$0.15
$0.13
$0.15
24 Gauge Discs
24
Weight and measure figures are approximates to aid price estimating.
24
1/2”
CPC24X050
$0.18
$0.15
26
24
9/16”
CPC24X05625
$0.21
$0.18
26
9/16”
CPC26X05625
$0.18
24
5/8”
CPC24X0625
$0.24
$0.20
26
5/8”
CPC26X0625
$0.21
$0.18
11/16”
$0.20
24
11/16”
CPC24X06875
$0.27
$0.23
26
CPC26X06875
$0.24
24
3/4”
CPC24X075
$0.30
$0.25
26
3/4”
CPC26X075
$0.27
$0.23
13/16”
CPC26X08125
$0.30
$0.25
24
13/16”
CPC24X08125
$0.33
$0.28
26
24
7/8”
CPC24X0875
$0.36
$0.30
26
7/8”
CPC26X0875
$0.33
$0.28
24
1”
CPC24X100
$0.39
$0.33
26
1”
CPC26X100
$0.36
$0.30
1-1/8”
CPC26X1125
$0.42
$0.35
24
1-1/8”
CPC24X1125
$0.45
$0.38
26
24
1-1/4”
CPC24X125
$0.54
$0.45
26
1-1/4”
CPC26X125
$0.51
$0.43
1-3/8”
CPC26X1375
$0.54
$0.45
24
1-3/8”
CPC24X1375
$0.57
$0.48
26
24
1-1/2”
CPC24X150
$0.69
$0.58
26
1-1/2”
CPC26X150
$0.66
$0.55
24
1-3/4”
CPC24X175
$0.78
$0.65
26
1-3/4”
CPC26X175
$0.75
$0.63
$0.78
26
2”
CPC26X200
$0.90
$0.75
24
2”
CPC24X200
$0.93
Did you know?
These discs and ovals are produced in the U.S. by Indian Jewelers Supply. Discs, Ovals, and Teardrops are also available in Sterling Silver and Nickel.
For other metals, please send a request to [email protected] or to: Attn: Specialty metals, I.J.S., P.O. Box 1774, Gallup, NM 87305-1774
Indian Jewelers Supply offers even more services on a private, commercial, and industrial scale including:
•
•
•
•
•
•
Lost-wax casting in silver, karat golds, and bronzes, plus rubber mold-making and wax injection
Multi-stage punch pressing, tooling creation
Sheet-metal coil slitting from 18 ga./0.04”/1.024mm to 32 ga./0.008”/0.202mm thickness.
Atmospheric oven soldering
Fusion (“Sparkie”) welding
Tumble finishing
Metals Base
227
COPPER WIRE - BULK SALES
Round Wire
Sold per pound (lb)
GA
Weight per ft
Length per lb.
Item No.
Price
14
0.013 lb.
74.4 ft.
COPRD14
$13.40
16
0.008 lb.
127.5 ft.
COPRD16
$13.40
18
0.005 lb.
193.9 ft.
COPRD18
$13.40
20
0.003 lb.
309 ft.
COPRD20
$13.40
22
0.002 lb.
520.9 ft.
COPRD22
$13.40
GAUGE
14
16
18
20
22
ROUND
COPPER WIRE GAUGES
COPPER WIRE - PRE-CUT COILS
Round Wire
GA
Sold per Coil
Coil Length
Item No.
Price 1+
Price 5+
15 ft
800-WC14
$7.94
$6.75
25 ft
800-WC16
$7.72
$6.56
18
25 ft
800-WC18
$5.08
$4.31
20
50 ft
800-WC20
$6.37
$5.42
22
75 ft
800-WC22
$5.67
$4.82
METALS
14
16
FOS-FLO #7 (COPPER) SOLDER WIRE
20 ga. round wire. Best for work with copper/brass/bronze. Joint
color is light copper. Self-fluxing on copper by virtue of
phosphorus content. Copper-based alloys like brass require flux.
Using on ferrous metals and nickel can make brittle joints.
MELT: 1310°F/710°C
FLOW: 1350°F/730°C
COMPOSITION: 92.75% copper, 7.25% phosphorus
Sold per ozT.
GA
Weight / ft
Min. Sale
Item No.
Price 1+
Price 12+
20
0.039 ozT
20 ft
801-WS
$1.95
$1.82
C O P P E R (CDA #110) S H E E T S , 6 X 3 6 ”
Any pieces less than 6x36 will be billed from the “1-4 pieces” column.
GA
Item No.
Price 1+
12
800-COP12
$86.22
$73.28
$64.66
16
800-COP16
$37.97
$32.27
$28.48
18
800-COP18
$30.91
$26.28
$23.18
20
800-COP20
$25.20
$21.42
$18.90
22
800-COP22
$19.49
$16.56
$14.62
24
800-COP24
$15.57
$13.23
$11.68
26
800-COP26
$12.54
$10.66
$9.41
28
800-COP28
$9.41
$8.00
$7.06
30
800-COP30
$7.84
$6.66
$5.88
C O P P E R (CDA #110) S H E E T S ,
Price 5+
SPECIAL SIZES
Price 10+
Helpfull Tip! Estimating Sheet Costs of
Copper (CDA #110)
Sold in full sheets only; special cutting is subject to additional fees.
GA
Size
Item No.
Price 1+
Price 5+
16
4” x 36”
800-COP16N4
$25.09
$21.32
16
4-1/2” x 36”
800-COP16N4H
$28.45
$24.18
22
12” x 12”
800-COP22X12X12 $13.66
$11.61
24
6” x 24”
800-COP24S
$8.82
$10.38
Divide the length in decimal inches by 36 to get the sheet unit for
price calculation.
EXAMPLE:
5-1/2 x 6” sheet
= 5.5 x 6” sheet
= 5.5 ÷ 36 = 0.1528 sheets.
228
Metals Base
NICKEL DISCS
GA
Dimensions
Made by IJS
Item No.
Price 1+
Price 100+
METALS
20 Gauge Disc
20
1/2”
NSC20X050
$0.16
$0.09
20
9/16”
NSC20X05625
$0.18
$0.11
20
5/8”
NSC20X0625
$0.19
$0.12
20
11/16”
NSC20X06875
$0.23
$0.14
20
3/4”
NSC20X075
$0.26
$0.16
20
13/16”
NSC20X08125
$0.29
$0.17
20
7/8”
NSC20X0875
$0.35
$0.21
20
1”
NSC20X100
$0.41
$0.25
20
1-1/8”
NSC20X1125
$0.50
$0.30
20
1-1/4”
NSC20X125
$0.60
$0.36
20
1-3/8”
NSC20X1375
$0.71
$0.43
20
1-1/2”
NSC20X150
$0.83
$0.50
20
1-3/4”
NSC20X175
$1.09
$0.66
20
2”
NSC20X200
$1.39
$0.84
N I C K E L O VA L S
GA
22
1/4”
NSC22X025
$0.14
$0.10
22
3/8”
NSC22X0375
$0.15
$0.11
22
1/2”
NSC22X050
$0.16
$0.12
22
9/16”
NSC22X05625
$0.18
$0.13
22
5/8”
NSC22X0625
$0.19
$0.14
22
9/16”
NSC22X06875
$0.23
$0.17
22
3/4”
NSC22X075
$0.27
$0.20
22
13/16”
NSC22X08125
$0.29
$0.22
22
7/8”
NSC22X0875
$0.30
$0.23
22
1”
NSC22X100
$0.40
$0.30
22
1-1/8”
NSC22X1125
$0.45
$0.34
22
1-1/4”
NSC22X125
$0.50
$0.38
22
1-3/8”
NSC22X1375
$0.59
$0.44
22
1-1/2”
NSC22X150
$0.70
$0.53
22
1-3/4”
NSC22X175
$0.90
$0.68
22
2”
NSC22X200
$1.11
$0.83
$0.11
30x40mm
1/2”
NSC24X050
$0.15
24
9/16”
NSC24X05625
$0.16
$0.12
24
5/8”
NSC24X0625
$0.18
$0.14
24
11/16”
NSC24X06875
$0.19
$0.14
24
3/4”
NSC24X075
$0.20
$0.15
24
13/16”
NSC24X08125
$0.23
$0.17
24
7/8”
NSC24X0875
$0.29
$0.22
24
1”
NSC24X100
$0.30
$0.23
24
1-1/8”
NSC24X1125
$0.36
$0.27
24
1-1/4”
NSC24X125
$0.46
$0.35
24
1-3/8”
NSC24X1375
$0.50
$0.38
24
1-1/2”
NSC24X150
$0.56
$0.42
24
1-3/4”
NSC24X175
$0.72
$0.54
24
2”
NSC24X200
$0.92
$0.69
Price 1+
Price 100+
NSO20X30X40
$0.80
$0.60
$0.73
$0.55
24 Gauge Disc: Ovals
24
30x40mm
NSO24X30X40
Did you
u Know?
? Nickel Silver has no silver!
Nickel (C.D.A. #752) is a combination of 65% copper, 18% nickel, and
17% zinc. Fancy names are given to the product, like German Silver
and Nickel Silver. White Brass would be a better name, given the high
amount of copper, the zinc content, and the relatively low percentage
of nickel.
24 Gauge Disc
24
Made by IJS
Item No.
20 Gauge Disc: Ovals
20
22 Gauge Disc
Dimensions
Helpfu
ul Info
o! Nickel Data
NICKEL (CDA #752): Also called German Silver or Nickel Silver.
Contains:
65% copper
18% nickel
17% zinc
Melting point:
1960ºF
Price 5+
Price 10+ Price 20+
Round Wire
NSRD10
0.03 lb.
10 ft.
$19.78
$18.36
$16.39
$15.54
12
NSRD12
0.02 lb.
10 ft.
$19.78
$18.36
$16.39
$15.54
14
NSRD14
0.013 lb.
10 ft.
$19.78
$18.36
$16.39
$15.64
16
NSRD16
0.008 lb.
20 ft.
$19.78
$18.36
$16.39
$15.64
18
NSRD18
0.005 lb.
20 ft.
$19.78
$18.36
$16.39
$15.54
20
NSRD20
0.003 lb.
20 ft.
$19.78
$18.36
$16.39
$15.54
22
NSRD22
0.002 lb.
20 ft.
$19.78
$18.36
$16.39
$15.54
Half Round Wire
ROUND
Sold per lb.
10
229
TRIANGLE
Weight / Ft. Min Sale Price 0+
HALF-ROUND
Item No.
GAUGE
GA
DOUBLE HALF-ROUND
NICKEL WIRES
SQUARE
Metals Base
2
3
4
Sold per lb.
6
2
NSHR02
0.093 lb.
10 ft.
$26.34
$24.46
$21.82
$20.69
8
4
NSHR04
0.065 lb.
10 ft.
$26.34
$24.46
$21.82
$20.69
10
6
NSHR06
0.038 lb.
10 ft.
$26.34
$24.46
$21.82
$20.69
8
NSHR08
0.025 lb.
10 ft.
$26.34
$24.46
$21.82
$20.69
10
NSHR10
0.015 lb.
10 ft.
$26.34
$24.46
$21.82
$20.69
12
NSHR12
0.01 lb.
20 ft.
$26.34
$24.46
$21.82
$20.69
14
NSHR14
0.0064 lb.
20 ft.
$26.34
$24.46
$21.82
$20.69
12
METALS
14
16
18
19
Double Half Round Wire
Sold per lb.
8
NSDH08
0.044 lb.
10 ft.
$25.03
$23.24
$20.74
$19.66
10
NSDH10
0.035 lb.
10 ft.
$25.03
$23.24
$20.74
$19.66
12
NSDH12
0.021 lb.
10 ft.
$25.03
$23.24
$20.74
$19.66
10 ft.
$19.32.
$17.94
$16.01
Square Wire
20
22
Nickel wire gauges
Sold per lb.
10
NSSQ10
0.038 lb.
12
NSSQ12
0.024 lb.
10 ft.
$19.32.
$17.94
$16.01
$15.18
14
NSSQ14
0.015 lb.
10 ft.
$19.32.
$17.94
$16.01
$15.18
Triangle Wire
$15.18
QUANTITY PRICE BREAKS
Nickel Silver and Red Brass
Sold per lb.
2
NSTR2
0.061 lb.
10 ft.
$19.32
$17.94
$16.01
$15.18
3
NSTR3
0.052 lb.
10 ft.
$19.32
$17.94
$16.01
$15.18
4
NSTR4
0.038 lb.
10 ft.
$19.32
$17.94
$16.01
$15.18
6
NSTR6
0.027 lb.
10 ft.
$19.32
$17.94
$16.01
$15.18
8
NSTR8
0.01 lb.
20 ft.
$19.32
$17.94
$16.01
$15.18
Products sold by weight, either troy ounce or avoirdupois
pound, combine for quantity price breaks.
Check the website, call, or fax for all available discounts and
current pricing.
N I C K E L S I LV E R S H E E T S
6”, 12”, 18”, and 36” Length Sheets - Various Widths
Nickel Sheets are Sold per Pound (lb)
0+ lb.
5+ lb.
10+ lb.
20+ lb.
40+ lb.
100+ lb.
$18.03
$16.74
$14.94
$14.16
$13.52
$12.88
Additional Sheet Cutting Charges
GA
Width
Weight 6”
Weight 18”
Weight 36”
10
6”
1.176 lb.
-
3.53 lb.
7.06 lb.
6” x 6”
NSSH10
14
4”
0.486 lb.
-
0.081 lb.
2.93 lb.
6” x 6”
NSSH14N
14
6”
0.732 lb.
-
2.19 lb.
4.38 lb.
6” x 6”
NSSH14
16
4”
0.39 lb.
-
1.175 lb.
2.35 lb.
6” x 6”
NSSH16N
16
4-1/2” 0.444 lb.
-
1.325 lb.
2.65 lb.
6” x 6”
NSSH16N4H
16
6”
0.588 lb.
-
1.76 lb.
3.52 lb.
6” x 6”
NSSH16
18
6”
0.456 lb.
-
1.37 lb.
2.74 lb.
6” x 6”
NSSH18
20
6”
0.354 lb.
-
1.07 lb.
2.133 lb.
6” x 6”
NSSH20
22
6”
0.282 lb.
-
0.84 lb.
1.689 lb.
6” x 6”
NSSH22
22
12”
24
6”
0.225 lb.
-
0.675 lb.
1.35 lb.
6” x 6”
NSSH24
6”
0.186 lb.
-
0.56 lb.
1.12 lb.
6” x 6”
NSSH26
6”
0.144 lb.
-
0.435 lb.
0.87 lb.
6” x 6”
NSSH28
6”
0.114 lb.
-
0.345 lb.
0.69 lb.
6” x 6”
NSSH30
We can cut multiple pieces of a sheet, at no cost, where the
cut is at least 1/2” long, at full sheet width. Charges will be 26
levied on cutting under 1/2” at full width, and on any further 28
shearing of cut-to-length pieces. Each cut is 5¢, billed as item
30
number “CUT SHEET”.
-
Weight 12”
1.13 lb.
-
-
Min. Sale Item No.
12” x 12” NSSH22X12X12
230
Metals Base
N I C K E L D E C O R AT I V E W I R E S
8 GA
Sold By The Troy Ounce
GA
6 GA
Size
Item No.
0+ ozt.
5+ ozt.
10+ ozt.
20+ ozt.
$12.51
$11.17
$10.59
Half-Round Bead, Plain Wires
4 GA
HALF-ROUND BEAD, PLAIN WIRES
8
3mm
NSHB30PP
0.24 ozt
5 ft
$13.48
6
4mm
NSHB40PP
0.42 ozt
5 ft
$11.88
$11.03
$9.85
$9.34
4
5mm
NSHB50PP
0.636 ozt
5 ft
$10.43
$9.69
$8.64
$8.20
Half-Round Bead, Stamped Wires
6 GA
4 GA
4mm
NSHB40PPS
0.42 ozt
5 ft
$13.34
$12.39
$11.05
$10.48
4
5mm
NSHB50PPS
0.636 ozt
5 ft
$12.25
$11.38
$10.15
$9.63
Gallery Wires
HALF-ROUND BEAD, STAMPED WIRES
8
3mm
NSGA58
0.16 ozt
5 ft
$29.75
$27.63
$24.65
$23.38
6
4mm
NSGA23
0.236 ozt
5 ft
$20.97
$19.47
$17.37
$16.47
Hollow Half-Round Bead Wires
8 GA
Hollow-backed to reduce weight. Also available in Sterling silver, and Red Brass
6 GA
GALLERY WIRES
6
4mm
NSHB40PPH
0.333 ozt
1 ft
$11.88
$11.03
$9.85
4
5mm
NSHB50PP
0.433 ozt
1 ft
$10.43
$9.69
$8.64
Flat Sided Half-round Bead Wires
8
6 GA
3mm
NSHB08
0.379 ozt
HOLLOW HALF-ROUND, BEAD WIRES
8 GA
5 ft
$3.33
4 GA
current pricing.
HALF-ROUND, FLAT SIDED BEAD WIRES
O.D.
NICKEL TUBING
I.D.
GAUGE
METALS
6
26
0.082”
9 GA
28
0.077”
10 GA
Sold By The Troy Ounce, in one-foot lengths
GA
O.D.
I.D.
Item No.
Weight / Ft. 0+ ozt.
5+ ozt.
10+ ozt.
20+ ozt.
26
9 ga.
0.082”
NSTB09
0.25 ozt.
$9.98
$9.26
$8.27
$7.84
28
10 ga.
0.077”
NSTB10
0.18 ozt.
$9.98
$9.26
$8.27
$7.84
NICKEL TUBING
NICKEL BEZEL STRIPS
GA
Width
Style
Item No.
Weight / Ft.
Weight / Spool
Length / Spool
Min Sale
1+ ozt.
5+ ozt.
10+ ozt.
32
1/8”
plain
NS18P
0.045 oz.
±14 oz.
264 ft.
10 feet
$1.92
$1.68
$1.39
32
3/16”
plain
NS316P
0.077 oz.
±22 oz.
265 ft.
10 feet
$1.92
$1.68
$1.39
32
1/8”
serrated
NS18SER
0.061 oz.
±14 oz.
275 ft.
10 feet
$4.21
$3.69
$3.05
32
3/16”
serrated
NS316SER
0.084 oz.
±22 oz.
282 ft.
10 feet
$4.21
$3.69
$3.05
1/8” PLAIN
3/16” PLAIN
1/8” SERRATED
3/16” SERRATED
Metals Base
RED BRASS DISCS
GA
Dimensions
231
Made by IJS
Item No.
Price 1+
Price 100+
$0.11
20 Gauge Disc
1/2”
RBC20X050
$0.15
20
9/16”
RBC20X05625
$0.16
$0.13
20
5/8”
RBC20X0625
$0.17
$0.14
20
11/16”
RBC20X06875
$0.18
$0.15
20
3/4”
RBC20X075
$0.19
$0.16
20
13/16”
RBC20X08125
$0.23
$0.17
20
7/8”
RBC20X0875
$0.31
$0.23
20
1”
RBC20X100
$0.39
$0.29
20
1-1/8”
RBC20X1125
$0.48
$0.36
20
1-1/4”
RBC20X125
$0.55
$0.41
20
1-3/8”
RBC20X1375
$0.57
$0.43
20
1-1/2”
RBC20X150
$0.66
$0.50
20
1-3/4”
RBC20X175
$0.72
$0.54
20
2”
RBC20X200
$0.91
$0.68
22 Gauge Disc
22
1/2”
RBC22X050
$0.14
$0.11
22
9/16”
RBC22X05625
$0.15
$0.12
22
5/8”
RBC22X0625
$0.16
$0.13
22
11/16”
RBC22X06875
$0.17
$0.14
22
3/4”
RBC22X075
$0.18
$0.15
22
13/16”
RBC22X08125
$0.19
$0.16
22
7/8”
RBC22X0875
$0.29
$0.22
22
1”
RBC22X100
$0.38
$0.29
22
1-1/8”
RBC22X1125
$0.43
R E D B R A S S O VA L S
GA
Dimensions
Made by IJS
Item No.
Price 1+
Price 100+
RBO20X20X38
$0.81
$0.61
RBO22X22X29
$0.71
$0.53
20 Gauge Ovals
20
20x38mm
22 Gauge Ovals
22
22x29mm
26 Gauge Ovals
$0.32
26
14x25mm
RBO26X14X25
$0.35
$0.26
15x20mm
RBO26X15X20
$0.36
$0.27
22
1-1/4”
RBC22X125
$0.46
$0.35
26
22
1-3/8”
RBC22X1375
$0.56
$0.42
26
17x32mm
RBO26X17X32
$0.37
$0.28
26
20x38mm
RBO26X20X38
$0.38
$0.29
22
1-1/2”
RBC22X150
$0.61
$0.46
22
1-3/4”
RBC22X175
$0.69
$0.52
22
2”
RBC22X200
$0.89
$0.67
$0.10
24 Gauge Disc
24
1/2”
RBC24X050
$0.13
24
9/16”
RBC24X05625
$0.14
$0.11
24
5/8”
RBC24X0625
$0.15
$0.12
24
11/16”
RBC24X06875
$0.16
$0.13
24
3/4”
RBC24X075
$0.17
$0.14
24
13/16”
RBC24X08125
$0.18
$0.15
24
7/8”
RBC24X0875
$0.28
$0.21
24
1”
RBC24X100
$0.29
$0.22
24
1-1/8”
RBC24X1125
$0.35
$0.26
24
1-1/4”
RBC24X125
$0.45
$0.34
24
1-3/8”
RBC24X1375
$0.49
$0.37
24
1-1/2”
RBC24X150
$0.55
$0.41
24
1-3/4”
RBC24X175
$0.68
$0.51
24
2”
RBC24X200
$0.78
$0.59
26 Gauge Disc
26
1”
RBC26X100
$0.28
$0.21
26
1-1/4”
RBC26X125
$0.41
$0.31
26
1-1/2”
RBC26X150
$0.50
$0.38
Helpful Info! Red Brass Data
RED BRASS (CDA #230): Also called Rich Low Brass, Jeweler’s
Bronze, Merlin’s Gold, or Craft Gold.
Contains:
85% copper
15% zinc
Melting point:
1877ºF
METALS
20
Metals Base
RED BRASS WIRES
GA
Weight / Ft. Min Sale Price 0+
Price 5+
Price 10+ Price 20+
$12.81
$11.43
Sold per lb.
0.02 lb.
10 ft.
$13.79
$12.81
$11.43
$10.84
RBRD14
0.012 lb.
10 ft.
$13.79
$12.81
$11.43
$10.84
2
16
RBRD16
0.008 lb.
20 ft.
$13.79
$12.81
$11.43
$10.84
3
18
RBRD18
0.005 lb.
20 ft.
$13.79
$12.81
$11.43
$10.84
20
RBRD20
0.003 lb.
20 ft.
$13.79
$12.81
$11.43
$10.84
22
RBRD22
0.002 lb.
20 ft.
$13.79
$12.81
$11.43
$10.84
TRIANGLE
RBRD12
14
SQUARE
12
ROUND
RBRD10
0.031 lb.
GAUGE
10
4
6
10 ft.
$13.79
Half-Round Wires
8
10
12
METALS
Item No.
Round Wires
LOW DOME
DOUBLE HALF-ROUND
HALF-ROUND
232
$10.84
Sold per lb.
6
RBHR06
0.038 lb.
10 ft.
$15.87
$14.74
$13.15
$12.47
8
RBHR08
0.023 lb.
10 ft.
$15.87
$14.74
$13.15
$12.47
10
RBHR10
0.015 lb.
10 ft.
$15.87
$14.74
$13.15
$12.47
14
12
RBHR12
0.009 lb.
10 ft.
$15.87
$14.74
$13.15
$12.47
16
14
RBHR14
0.005 lb.
20 ft.
$15.87
$14.74
$13.15
$12.47
18
Double Half-round Wires
Sold per lb.
20
8
RBDH08
0.045 lb.
10 ft.
$17.12
$15.89
$15.32
$14.18
22
10
RBDH10
0.037 lb.
10 ft.
$17.12
$15.89
$15.32
$14.18
12
RBDH12
0.019 lb.
10 ft.
$17.12
$15.89
$15.32
$14.18
RED BRASS WIRE GAUGES
Low Dome
3
Sold per lb.
RBLD03
.071 lb.
5 ft.
$16.43
$15.26
$13.62
Square Wires
$12.91
Sold per lb.
10
RBSQ10
0.038 lb.
10 ft.
$15.87
$14.74
$13.15
$12.47
12
RBSQ12
0.025 lb.
10 ft.
$15.87
$14.74
$13.15
$12.47
14
RBSQ14
0.015 lb.
10 ft.
$15.87
$14.74
$13.15
$12.47
Triangle
Sold per lb.
4
RBTR4
0.036 lb.
10 ft.
$15.87
$14.74
$13.15
$12.47
6
RBTR6
0.029 lb.
10 ft.
$15.87
$14.74
$13.15
$12.47
8
RBTR8
0.011 lb.
10 ft.
$15.87
$14.74
$13.15
$12.47
RED BRASS SHEETS
6”, 12”, 18”, and 36” Length Sheets - Various Widths
Red Brass Sheets are Sold per Pound (lb)
0+ lb.
5+ lb.
10+ lb.
20+ lb.
40+ lb.
100+ lb.
$9.28
$8.61
$7.69
$7.29
$6.89
$6.63
GA
Width
Weight 6”L
14
6”
0.72 lb.
Weight 12”L Weight 18”L Weight 36”L Min. Sale Item No.
-
2.21 lb.
4.42 lb.
6” x 6”
RBSH14
16
6”
0.60 lb.
-
1.755 lb.
3.51 lb.
6” x 6”
RBSH16
18
6”
0.48 lb.
-
1.36 lb.
2.72 lb.
6” x 6”
RBSH18
20
6”
0.06 lb.
-
1.10 lb.
2.20 lb.
6” x 6”
RBSH20
22
6”
0.294 lb.
-
0.875 lb.
1.75 lb.
6” x 6”
RBSH22
22
12”
24
1.11 lb.
6”
0.24 lb.
-
0.69 lb.
1.38 lb.
6” x 6”
RBSH24
26
6”
0.18 lb.
-
0.555 lb.
1.11 lb.
6” x 6”
RBSH26
We can cut multiple pieces of a sheet, at no cost, where the 28
cut is at least 1/2” long, at full sheet width. Charges will be
levied on cutting under 1/2” at full width, and on any further 30
shearing of cut-to-length pieces. Each cut is 5¢, billed as item
number “CUT SHEET”.
6”
0.12 lb.
-
0.41 lb.
0.82 lb.
6” x 6”
RBSH28
6”
0.114 lb.
-
0.345 lb.
0.69 lb.
6” x 6”
RBSH30
Additional Sheet Cutting Charges
-
-
12” x 12” RBSH22X12212
-
Metals Base
233
R E D B R A S S D E C O R AT I V E W I R E S
8 GA
GA
Size
Item No.
0+ ozt.
5+ ozt.
10+ ozt.
20+ ozt.
6 GA
Half-Round Bead, Plain Wires
8
3mm
RBHB30PP
1.22 ozt
5 ft
$15.69
$14.53
$13.49
$12.79
6
4mm
RBHB40PP
2.2 ozt
5 ft
$9.91
$9.18
$8.51
$8.07
4
5mm
RBHB50PP
3.13 ozt
5 ft
$8.99
$8.32
$7.72
$7.32
4 GA
HALF-ROUND BEAD, PLAIN WIRES
Half-Round Bead, Stamped Wires
6
4mm
RBHB40PPS
2.2 ozt
5 ft
$9.28
$8.59
$7.98
$7.56
4
5mm
RBHB50PPS
3.13 ozt
5 ft
$5.05
$4.67
$4.34
$4.11
6 GA
Gallery Wires
8
3mm
RBGA58
0.74 ozt
5 ft
$29.75
$27.63
$24.65
$23.38
6
4mm
RBGA23
1.22 ozt
5 ft
$14.53
$13.49
$12.04
$11.41
4 GA
HALF-ROUND BEAD, STAMPED WIRES
8 GA
Hollow-backed to reduce weight. Also available in Sterling Silver and Nickel Silver.
6
4mm
RBHB40PPH
0.2733 ozt
1 ft.
$9.91
$9.18
$8.51
4
5mm
RBHB50PPH
0.4467 ozt
1 ft.
$8.99
$8.32
$7.72
6 GA
GALLERY WIRES
Flat Sided Half-round Bead Wires
8
3mm
RBHB08
0.386 ozt
5 ft
$18.83
$17.49
$15.60
$14.80
6
4mm
RBHB06
0.566 ozt
5 ft
$18.83
$17.49
$15.60
$14.80
6 GA
4 GA
HOLLOW HALF-ROUND, BEAD WIRES
current pricing.
8 GA
Sold By The Troy Ounce, in one-foot lengths
GA
O.D.
I.D.
Item No.
Weight / Ft. 0+ ozt.
5+ ozt.
10+ ozt.
20+ ozt.
26
9 ga
0.082”
RBTB09
0.238 ozt.
$6.00
$5.57
$4.97
$4.72
28
10 ga
0.077”
RBTB10
0.179 ozt.
$6.00
$5.57
$4.97
$4.72
I.D.
GAUGE
RED BRASS TUBING
6 GA
O.D.
HALF-ROUND, FLAT SIDED BEAD WIRES
26
0.082”
9 GA
28
0.077”
10 GA
RED BRASS TUBING
RED BRASS BEZEL STRIPS
Convenient 10 foot coils are available for small purchases. Purchases of multiple small individual coils may have added
charges! Consider purchasing bezel strip on a protective cardboard spool.
GA
Width
Style
Item No.
Weight / Ft. Weight / Spool Length / Spool Min Sale 0+ ozt.
5+ ozt.
10+ ozt.
20+ ozt.
40+ ozt.
100+ ozt.
32
1/8”
plain
RB18P
0.064 oz.
14 oz.
197 ft.
10 ft
$1.56
$1.45
$1.29
$1.22
$1.16
$1.11
32
3/16”
plain
RB316P
0.087 oz.
22 oz.
237 ft.
10 ft
$1.56
$1.45
$1.29
$1.22
$1.16
$1.11
32
1/8”
serrated RB18SER
0.048 oz.
14 oz
197 ft.
10 ft
$3.41
$3.17
$2.83
$2.68
$2.54
$2.44
32
3/16”
serrated RB316SER
0.080 oz.
22 oz.
237 ft.
10 ft
$3.41
$3.17
$2.83
$2.68
$2.54
$2.44
1/8” PLAIN
3/16” PLAIN
1/8” SERRATED
3/16” SERRATED
METALS
Hollow Half-Round Bead Wires
Metals Base
Y E L L O W B R A S S W I R E - Bulk Sales
GAUGE
ROUND
234
Round Wire
14
16
18
20
Sold per pound (lb)
GA Weight / ft
Length / lb. Item No.
14 0.013 lb.
79.3 ft.
16 0.007 lb.
18 0.005 lb.
20 0.003 lb.
Y E L L O W B R A S S W I R E - Pre-cut Coils
Round Wire
Sold per Coil
Price
GA Coil Length
Item No.
Price 1+
Price 12+
BRSRD14
$9.90 lb.
14 15 ft
800-WB14
$7.45
$6.33
134 ft.
BRSRD16
$9.90 lb.
16 25 ft
800-WB16
$7.34
$6.24
214.5 ft.
BRSRD18
$9.90 lb.
18 50 ft
800-WB18C50
$9.18
$7.80
306.4 ft.
BRSRD20
$9.90 lb.
20 50 ft
800-WB20C50
$6.43
$5.46
YELLOW BRASS WIRE GAUGES
Y E L L O W B R A S S (CDA #260) S H E E T S , 6 X 3 6 ”
METALS
YELLOW BRASS SHEETS
GA
Item No.
Price 1+
Price 5+
Price 10+
16
800-BRS16
$34.94
$29.70
$26.21
18
800-BRS18
$27.56
$23.43
$20.67
20
800-BRS20
$21.94
$18.65
$16.46
22
800-BRS22
$17.06
$14.50
$12.79
24
800-BRS24
$13.94
$11.85
$10.45
26
800-BRS26
$11.23
$9.55
$8.42
Hellpfful Tip
p! Estimating Sheet Costs of
Yellow Brass (CDA #206)
He
elp
pful In
nfo! Yellow Brass Data
YELLOW BRASS (CDA #260)
Contains:
70% copper
30% zinc
Melting point:
1706ºF
BRASS
AND
Divide the length in decimal inches by 36 to get the sheet unit for price
calculation.
EXAMPLE:
5-1/2 x 6” sheet
= 5.5 x 6” sheet
= 5.5 ÷ 36 = 0.1528 sheets.
BRONZE CASTING GRAINS
Type
Description
Composition
Liquid at º
Solid at º
Pouring Temp
BronWite
A copper-based white casting
alloy that can be polished to a
high lustre.
59% copper
20% zinc
20% manganese
1% aluminum
1550ºF
1505ºF
Sand casting, CABRNW
1650-1750ºF
Die casting,
1600 - 1700ºF
DZR Brass
A yellow brass for casting that
offers good solderability and
ease in plating. This alloy has
found acceptance in the ring,
charm, and fashion buckle
industries. It melts cleanly,
and produces a ductile
casting that finishes to a
pale yellow gold color in a
reasonable amount of time.
63.0% copper
32.5% zinc
2.0% lead
0.7% silicon
0.5% manganese
0.5% nickel
0.5% tin
0.3% aluminum
0.05% antimony.
1610-1630ºF.
1700-1850ºF.
EverDur
a silicon bronze that cleans to
a bronze color.
95% Copper
4% Silicon
1% Manganese
1580F-1790F
Herculoy
A gold-color silicon bronze.
92% copper
4% silicon
4% zinc.
1780ºF
1580ºF
Item No.
Price 1+ lb
Price 10+ lb
$9.67
$9.10
$11.10
$10.45
2000F-2150ºF CAEVER
$10.88
$10.24
Light castings, CAHERC
2050-2250ºF,
heavy castings,
1900 - 2050ºF
$10.88
$10.24
CADZR
WARNING!
Grains Contain Silicon
Silicon accumulating in lungs may be
responsible for benign pneumoconiosis
(lung disease). Wear appropriate
protection, use adequate ventilation.
BRONWITE
DZR BRASS
EVERDUR
HERCULOY
Metals Base
SOFT SOLDERS
235
Recommended for use with ferrous and plated findings. Why? Soft solders melt at lower temperatures, helping eliminate firescale. Finishing work is kept to a
minimum, so platings are less likely to be polished off. The temper of spring closures is also less likely to be affected by the low soldering temperatures.
S TAY - B R I T E ® S O L D E R & S TAY - C L E A N F L U X
STAY-BRITE: for non-ferrous metals (gold, silver, copper, brass, bronze, nickel). Excellent
for joining dissimilar metals. Flows at 430ºF, can work with a soldering iron. Composition is 96%
tin, 4% silver. Tensile strength is 10,000 to 25,000 psi.
STAY-CLEAN FLUX is great for copper, brass, and bronze. Pre-cleaning is not necessary
unless parts are dirty or oily.
Description
Item No.
Price
A
Stay-Brite® complete kit, 0.5 oz solder & 0.5 oz flux
242-SB
$9.50
B
STAY-CLEAN FLUX, 4 fl. oz.
242-SCF4
$6.70
C
STAY-CLEAN FLUX, 16 fl. oz.
242-SCF16
$9.30
A
LIQUID SOLDERING FLUX
B
C
D
For use with Silvabrite™ and similar silver/tin solders whose liquidus is below 700°F. Not recommended for titanium/aluminum/magnesium/electronics.
Item No.
Price
16 oz. (464 ml)
242-SLVBFX
$6.57
METALS
D
Description
E N G E L H A R D S I LVA B R I T E S O L D E R
For most ferrous and non-ferrous metals, including stainless steel, bronze, and brass. Rosin core
for soldering where fluxing is inconvenient, works well with Liquid Soldering Flux. Free of lead
and cadmium!!! 1/16” diam. wire, 4% silver, 96% tin, melts at 430º F. It makes a bright,
non-oxidizing silver joint with a tensile strength of 14,000 psi.
Description
Item No.
Price
E
10+ ft.
242-SLVB10
$4.05
F
107 ft. spool
242-SLVB
$33.75
E
F
TIX SOLDER, FLUX , & ANTI-FLUX
• TIX SOLDER - “the hardest soft solder there is”. Has under 2% lead. Melts at 275ºF, with
holding power of 4300 psi. Adheres to all ordinary solderable materials and works with soldering
irons, torches, and machines. Stays white, won’t tarnish.
• TIX FLUX: non-corrosive, harmless to hands & clothing. Washes off with water, even when
dry. Works well with any soft solder.
• TIX ANTI-FLUX keeps solders away from moving parts.
Description
Item No.
Price
G
TIX SOLDER - 20 sticks per tube
242-STIX
$13.90
H
TIX FLUX - 1/2 oz applicator bottle
242-STIXF
$3.65
I
TIX ANTI-FLUX - 1/2 oz applicator bottle
242-STIXAF
$3.50
G
H
PROCRAFT PASTE SOLDER
Melts at 430ºF. Non-toxic, free of lead, cadmium, and antimony. Leaves a bright, tarnish-free
joint. In a syringe dispenser, places a precise amount of solder and flux right where you need it.
Description
Item No.
Ship wt. 3 ounces. This soft solder is not for use on pot metals. 242-SOLPST
J
Price
J
$6.25
S O L D E R - I T ™ Pre-fluxed Paste Solders in Resealable Syringes
For low heat from soldering irons, or almost any fuel-air torches. Just apply to a clean joint and
heat gently. No special skills are required, though practice is helpful. Both solders flow smoothly
at 430°F, for a strong (10,000 to 25,000 psi tensile) joint that is electrically conductive and resistant to stress and vibration. The joint will be silver-colored, resistant to tarnish, and non-toxic. Not
for use on aluminum, magnesium, or pot metals. Free of lead, cadmium, or antimony, conforms
to pure food laws. Made in U.S.A.
Description
Item No.
Price
K
SILVER BEARING joins 22 different metals, including copper,
242-SPSB
brass, bronze, nickel, platinum, chrome, monel, stainless,
galvanized, gold, silver, coated/black/regular steel, and cast
iron. Great for all electrical soldering, copper plumbing, and car
radiators. 7.1g syringe
$4.15
L
PLUMBERS’ SOLDER - formulated for plumbing applications and 242-SPCR
heavy-duty soldering work. Ideal for joining heavy metal parts
in conditions where ordinary solder would fail. Best for use with
copper, brass, stainless steel, nickel, and bronze. 14.7g syringe
$5.35
K
L
I
236
Metal Clays
METAL
CLAYS
are easily shaped,
dried, and fired into metal objects. They are blends of metal particles,
water, and an organic binder.
Successful working requires
little in specialized
tools or training.
S I LV E R P M C ™ C L AY S
Prices are based on a Silver market of $29.05
Description
Item No.
Price
PMC+™ Clay
Fires harder, shrinks less, and is less plastic than Original PMC. This is desirable for maintaining the size of a ring/earring. The stronger molecular bond of
PMC+™ makes it the ideal candidate for rings, which receive lots of wear. It’s
great for repairs, and for the instructional setting. Instructions included.
18 grams after firing
425-PMC+18
$38.46
425-PMC+28
$58.29
PMC3™ Clay
METALS
Has the smallest particle size. This gives you the fastest firing times at the
lowest heats (great for implants). Though kilns are ideal for best results, firing
by torch or a properly rated heat gun is possible. Instructions included.
425-PMC316
$35.88
425-PMC325
$54.40
PMC+
slightly stiff
excellent
Shrinkage
10-15%
10-15%
Firing Temp. &Time
1650 for 10 min.
1290 for 10 min.
1560 for 20 min.
1200 for 20 min.
1470 for 30 min.
1110 for 30 min
Helpful Tip!
BRONZClay™ and COPPRclay™
must be embedded in activated carbon in a
covered stainless steel vessel during firing.
PMC3
Workability
Strength
very good
very good
Available types
Clay
Clay Syringe slip-paste
Suggested Uses
•
•
•
•
•
•
•
rings
pendants
bracelets
C O P P R C L AY ™
AND
rings
charms
pendants
bracelets
B R O N Z C L AY ™
Lower-cost alternatives to PMC! Like precious metal clays, these products can
be pinched, rolled, sculpted, cut or manipulated any way you like. After drying
and a special firing*, you have a unique base metal object. Create jewelry,
jewelry components, or even practice new techniques or design ideas before
committing to precious metals. Tools not included, placed in photo for scale.
Description: Packet Weight
Item No.
Price
100g
425-BC100
$19.98
200g
425-BC200
$35.98
100g
425-CC100
$19.98
200g
425-CC200
$35.98
BRONZClay™
COPPRclay™
COPPRclay
M E TA L C L AY F I N I S H I N G K I T
Twelve handy tools in a wood holder block. All
shanks are 3/32” (2.35mm), for most Dremel and
Foredom style rotary tools.
Includes
3
1
2
1
1
2
2
Item No.
brushes,
425-MCST12
buff,
burs,
drill,
e el,
texturing wheel,
n ts and
grinding points
her po
point
ints.
s.
silicon polisher
points.
Price
$14.95
BRONZclay
Shrinkage
Approximately 20%
Approximately 20%
Activated Carbon
Coconut shell only
Coconut shell Coal based
Recommended firing
schedule for ANY
thickness (up to 10mm
for BRONZclay)
Ramp: Full
Temperature:
1700°F (927°C)
Hold time: 3 hours
Total firing time: ~ 3½ hours
Ramp: 250°F (139°C) per hour
Temperature: 1550°F (843°C)
Hold time: 3 hours
Total firing time: ~9 hours
Thick firing schedule
(1.75mm to 10mm thick)
Ramp: Full
Hold time: 3 ½ hours
Hold time: 3 hours
Note: For pieces thicker than 10mm
the ramp temperature
Thin firing schedule
(less than 1.75mm thick)
Ramp: Full
Hold time: 2 hours
Total firing time: ~2 ½ hours
Hold time: 2 hours
Total firing time: ~ 5 hours
Indian Jewelers
l
Supply
S
l Co
C - Main
M i C
Catalog
t
Volume 2
Metal Clays
237
N AT U R E ’ S T O U C H A N T I - S T I C K
Apply this non-greasy release agent to tools, work surfaces, and your hands to
keep metal clays from sticking.
A
Formulated with vitamin E, lavender,
extra-virgin olive oil and beeswax.
425-NT
$4.85
L AV E N D E R O I L
Used to mix oil paste and Lavender Water. Oil paste is the best bonding agent
for repairing breaks and making fabrication-style assemblies. Lavender Water is
used in rehydrating BRONZclay.
Vial contents are 1 Dram / 1/8 fl. oz / 3.6 425-LAV01
mL of pure Essential Oil, supplied with dropper cap.
B
A
B
$4.25
C
M E TA L C L AY R O L L E R & S PA C E R K I T
Dense, smooth white plastic roller comes
complete with rubber spacers for 1/16,
3/32, and 1/8” thick slab rolling.
425-ROLS2
$11.50
425-ROLSP
$3.50
D
METALS
Complete Roller Kit
C
Spare Spacer Kit
D
Two bands each for 1/16, 3/32, and 1/8”
thick slab rolling.
PRO-DESIGN SHAPERS
High-quality non-stick plactic tools are easy to clean. Double-ended for a
diversity of useful shapes.
E
14 mini tools, 4-1/2” long
425-MCST14
$11.50
F
9 large tools, 6-1/2” long
425-MCST9
$19.45
COLOUR SHAPER SET
Somewhere between brushes, palette knives, and modelling tools, you find
Colour shapers. Soft, flexible silicon tips do subtle detailing and bold strokes.
G
Easily cleaned and long-lasting, the set of 5 425-CSS
chisel shapes includes the following: Cup,
Rounded Cup, Flat, Angled, and Tapered.
E
$19.50
G
D O U B L E - E N D E D C O L O U R S H A P E R / C A RV E R
Flexible silicon tip on one end, loop carver opposite. Carve, scuplt, and smooth
with precise control.
H
Silicon #2 flat/chisel tip is durable and eas- 425-MCSC
ily washable.
F
$7.95
H
P AT T E R N / T E X T U R E W H E E L S
Unique tool makes small, repeated designs on clays. Hard, non-stick plastic
wheels are easy to clean.
I
Wheels mount in a 4-1/2” handle.
425-MCTT
$9.35
I
238
Metal Clays
U LT R A C L AY P I C K
The perfect tool for working with templates, and cutting out shapes!
Featuring a much finer tip than needle tools sold for knotting/stringing pearls,
the Ultra Clay Pick has an extremely fine case-hardened spring tool steel tip
that cuts through clay like a laser. Large picks may work for some tasks, they
are a poor choice for cutting out clay, due to distortion caused by thicker tip.
A
B
A
Needle tip plus no-roll handle gives an
overall length of 6”
425-UCP
$11.75
425-BR725
$0.95
SLIP BRUSH
C
Great for applying patinas, adding slips.
B
Quality import artist brush is 8-1/4” long
overall, 1/2” bristles.
PALETTE KNIFE
METALS
Great for mixing, rehydrating, and projects where a small, flexible spatula is
useful.
C
425-PK6F
6” long overall
$1.75
S P R AY B O T T L E
F
E
D
Distributes just the right amount of water needed for re-moisturizing dried
clays. Don’t rule out other tasks requiring spraying.
D
425-BTL01
4 fl. oz. capacity
$0.99
N O N - S T I C K M A G I C M AT S
Special non-stick hard plastic mat is ideal for metal clay work.
Two convenient sizes, 12 x 12” and 6 x 6”.
E
12x12”
425-MAT1212
$11.75
F
6x6”
425-MAT66
$3.15
ESSENTIAL TOOL KIT
Eight tools for working with unfired polymer and metalclays. Drill, cut, pierce
filigrees, make borders, trim, do sgraffito and more. ship wt 1.25 lb.
Includes
G
G
Item No.
•Paintbrush
•3.25” wide roller
•Scalpel
•Double-end rubber shaper
•Thin steel cutter
•Double-end steel spatula
•Piercer
•Wood modeller
425-PMCTK
Price
$14.40
HOCKEY PUCK
Hockey pucks make excellent rubber bench blocks. They won’t damage files,
and offer truer surfaces than many rubber blocks sold for benchwork. Sturdy
and firm, yet still a bit springy. Use as a brace to sand and file leatherhard and
fired metal clay and any other metals, and enjoy a fabulous worksurface for
creating your pieces.
H
H
Diameter is the official 2”
425-HPK
$7.75
B A I L T E M P L AT E S
Clear plastic. Lay directly on clay and cut, or trace on sheet metals for sawing.
I
I
Bail Template #1
425-TMP101
$4.75
J
Bail Template #2
425-TMP100
$4.75
J
Metal Clays
239
T O O L S TA N D
The tubes are attached to an attractively finished wood base. Colour Shaper
tools not included.
A
425-MANW
Six 1/4” (6mm) ID metal tubes hold your
most needed tools conveniently upright.
$6.10
A
4-PIECE TWEEZER-AND-PICK
SET
Double-ended pick, double-ended carver, locking tweezers, and a positioning
tweezer. Useful for metal clay work, and so many other tasks.
Double ended picks and carvers clean,
425-MCST4
shape, and smooth. #7 tweezer does
delicate handling and positioning, and a
locking tweezer does tiny clamping jobs. All
tools are quality-made in stainless steel.
B
$5.95
B
METALS
H O T P L AT E
Construct wet pieces on playing cards, then set the card on the hot plate for drying that takes only minutes.
4-1/4” heated surface for very quick drying. 425-HP01
Plugs into 120V U.S. outlets.
C
$9.75
C
TRIPODS, SCREENS,
AND
SETS
For metal clay torch firings and soldering operations. Rings are
black-enamelled iron, threaded to accept plated steel legs. Screens are 6x6”.
D
Tripod, 9” high
203-TDS
$12.00
E
Screen, fine wire mesh
203-T66
$2.25
203-TM6
$6.65
DE Fine-wire screen and 6” tripod
D
THIS JUST IN!!!
BLAZER™ TORCHES AND BUTANE! Pa
age 394
4
R E F I L L A B L E B U TA N E T O R C H
Pursue a local source for butane filling canisters.
F
Reaches 2370°F, 6” tall, torch
stand included.
F
316-BT300
E
$29.95
240
Metal Clays
FIRING VESSELS —
COVERED OR UNCOVERED
Choose from 3 different heights.
• Deep Vessels are 6-7/8 x 6-3/8” at mouth, constructed of
18/8 Stainless Steel.
• Firing Vessel Covers 18/8 Stainless Steel, 24 gauge,
6-7/8 x 6-3/8”
Description
A
B
C
Item No.
Price
Deep Vessels
A
2-1/2” deep vessel only
425-FPAN01
$10.25
B
4” deep vessel only
425-FPAN02
$14.25
C
6” deep vessel only
425-FPAN03
$17.25
Firing Vessel Covers
D
D
425-FPANCOVER $4.50
Firing Vessel Cover
METALS
Deep Vessel and Covers
E
F
G
E
2-1/2” deep vessel & cover
425-FPAN01C
$14.75
F
4” deep vessel & cover
425-FPAN02C
$18.75
G
6” deep vessel & cover
425-FPAN03C
$21.75
COCONUT MEDIA,
G R A N U L AT E D
For firing COPPRclay™ and BRONZClay™ objects.
H
One pound takes up about 6x6x2.5” or
15x15x6.5cm of space.
425-FPCM
$3.95
Description
Item No.
Price
I
All-metal
425-SPN01
$2.85
J
Red handle, 2 oz.
425-SPN02
$4.45
3M™ SOFTBACK SANDING SPONGES
J
K1
Price
For sifting firing medias onto objects, or recovering objects after firing. Don’t
rule out cooking!
I
K3
Item No.
P E R F O R AT E D S P O O N S
H
K2
Description
Pad measures 4-1/2 x 5-1/2”. Aluminum oxide is waterproof-bonded to the
sponge material for a flexible, firm surface. The pads work especially well for
shaping unfired dry metal clay. Also, you can smooth flat surfaces and round
corners. Polish after applying patinas, getting the high spots while leaving
recesses dark.
K4 K5
Description
Item No.
Price
Complete set of 5
425-3MSET01
$16.10
K1 MEDIUM
425-3MM
$3.75
K2 FINE
425-3MF
$3.25
K3 SUPER-FINE
425-3MSF
$3.75
K4 MICRO-FINE
425-3MMF
$3.75
K5 ULTRA-FINE
425-3MUF
$3.75
K
K
CORUNDUM SANDING STICKS
L1
Long-lasting corundum papers mounted on wood slats. The firm surface sands
and pre-polishes straight sides and flat surfaces. Works great with leatherhard
metal clay to refine shapes. Each long-lasting stick is approximately 1x9”
overall.
L2
L3
L4
L5
L
L6
Description
Item No.
Price
Complete set of 6
425-SSSET
$7.95
L1 #4 (400 grit)
425-MCSS4
$1.95
L2 #2 (600 grit)
425-MCSS2
$1.95
L3 #1 (800 grit)
425-MCSS1
$1.95
L4 #0 (1000 grit)
425-MCSS0
$1.95
L5 #2/0 (2000 grit)
425-MCSS2Z
$1.95
L6 #4/0 (4000 grit)
425-MCSS4Z
$1.95
L
Metal Clays
241
P A R A G O N S C 2 ( S I LV E R C L AY ) K I L N
Popular with teachers, and small studio jewelers. Quickly fires metal clays, glass,
and enamels at temperatures up to 2000°F
Accomplish almost anything you desire with the SC2: fire metal clay, fuse dichroic glass, enamel silver and copper, fire and glaze bisque, co-fire gemstones,
glass and metal clay, co-fire sterling silver and metal clay and more!
The heart of the kiln is the reliable Sentry Xpress 3-button digital controller with
5 speed settings and 4 program settings. The speed settings are single segment
ramp/hold programs, which simply heats to a target temperature, holds that
temperature for the specified amount of time and then shuts itself off. Simplicity
meets safety and adds up to peace of mind!
The ceramic fiber interior has heating elements embedded within the fiber shell.
This offers great protection for travelling. For convenience, the power source is
any working 120V outlet.
Kiln Description
Item No.
Price
Basic SC2 Kiln
378-PSC2
$622.00
SC2 Kiln with Bead Door
378-PSC2WD
$680.00
METALS
This kiln, like all other models with a ceramic fiber interior has a maximum
temperature of 2000°F. The SC2 ships with one 6x6” fiber kiln shelf, and can
handle up to 2 shelves.
JEN-KEN KILNS
Our customized Model #AF3P 11/6 is a multi-purpose brick kiln you’ll use for one project after another. Robust electronics support a maximum temperature of
1800°F, suitable for firing metal clay, glass, enamels, and more. This same model is available with a bead door, a window, or both, by special order.
This compact brick kiln has handles for portability, but constant travel is not recommended.
Set-and-forget operations are made possible by the Orton digital controller. 20 different firing schedules are pre-programmed, and blank slots are provided for
your own unique firing schedules. All programs are easily editable for fine-tuning. The single heating element is wrapped around the interior twice. Copper and
bronze artists will appreciate the way this kiln heats evenly from all sides.
Helpfu
ul Tip! Temperature Conversions
•
Chamber Dimensions: 11 x 11 x 6”
•
Electrical: 120 volts @ 15 amps - 1560 watts
Degrees Fahrenheit = °F = (1.8 x °C) + 32
•
Ship Weight: 70# (UPS-shippable), arrives with shelf, posts, peep-hole
plug, base brick, kiln wash and a complete operating manual.
Degrees Celsius = °C =.556 x (°F - 32)
Description
Item No.
Price
Model #AF3P 11/6
378-JK116
$550.00
The kiln is warranted to be free from defects in materials and
workmanship when used under normal and proper
per
conditions, for a period of two years. Manufacturer
rer
recommends setting kiln on a 16x16” stepping stone,
available from your local home center for around
d $5.
GLOVES
Description
Item No.
Aluminized Leather, 370-ALMG
Wool-lined, protects
to 500°F. 14” Length
Price
$45.95
Degrees Centigrade = °C =.556 x (°F - 32)
Usa
age Warning!
Place any kiln a safe distance from walls and heat-sensitive
objects.
468
TERMS and CONDITIONS
Your First Order
Your first order must be paid by VISA, MasterCard, American Express, bank cashier’s check, or money order. You may pre-pay with a personal or busines check.
C.O.D. privileges will not be extended to first-time customers.Your first order must be paid by VISA, MasterCard, American Express, bank cashier’s check, or
money order. You may pre-pay with a personal or business check. C.O.D. privileges will not be extended to first-time customers. See terms and conditions for
all means of payment below.
•VISA / MasterCard / AMERICAN EXPRESS. Prior to shipping your first order, we will verify your name, billing address, and account number with the issuing
bank. Some restrictions may apply.
•AUTHORIZED PERSONAL/BUSINESS CHECKS — The checkwriting authorization form is bound into this catalog. Applicable terms appear on that form. Terms
are subject to change without notice.
•BANK WIRE TRANSFERS are slow and expensive. Save time and money with Postal Money Orders or Cashier’s Checks sent via Express Mail.
Foreign Currencies
Regulations are unpredictable. Fees change with little notice. Ideally, pay in U.S. dollars by one of four means:
1) Visa, MasterCard, AmEx credit cards. These are generally the best exchange rates.
2) Bank Wire Transfer - see above.
3) Check/money order drawn on U.S. bank.
4) International postal money order.
Subject To Change Without Notice:
Prices, Product Specifications, Product Availability, Our Sales Terms, Shipping Fees and Regulations, Manufacturer support of existing products.
Honest Shipping Charges
Shipping charges are added to your order based on its total weight, destination, and means of shipment. Prior to actually packing the order, we can only
estimate shipping charges.
NO MINIMUM ORDER!
Sometimes, no matter how well you plan, you just need a few items. The handling charge ($5.00 for orders under $50.00) helps us take care of you, still
keeping regular prices low.
Open Account
Applications are bound in our catalogs. Allow at least two weeks after submission for processing. Upon investigations with your current creditors and credit
reporting agencies, your application will be approved or declined. We reserve the right to decline credit to any account for any reason/no reason. Delinquent
accounts will be assessed a service charge when payment is not received in a timely manner, and may be suspended at any time for late payment or
dishonored checks. For open accounts, payments for purchases are due the 10th of the month following purchase. Payment must be RECEIVED AT I.J.S. by the
25th day of the month for purchases from the previous month to avoid a service charge.
Means of shipment
IJS prefers UPS (United Parcel Service)
•Red Label (1st day)
•Blue Label (2nd day air)
•Orange Label (3-day air)
•Ground
UNITED STATES POSTAL SERVICE
•Express Mail
•First Class (Air, less than 12 oz)
•Priority (Air, 12 oz and over)
•Registered Mail
•4th class (Ground)
TRUCK FREIGHT, PREPAID OR COLLECT
•Arkansas Best Freightways
•Yellow Freight
FEDERAL EXPRESS (if you have a FedEx account).
Hazardous Materials
I.J.S. is not a certified Hazardous Materials shipper, due to the costs of compliance. Many items are designated ORM-D. That means Otherwise Regulated Material - Domestic. These items contain hazardous material in a limited quantity that presents a limited hazard during transportation, due to its form, quantity,
and packaging. Material marked ORM-D will often be limited to surface transport. Aerosol sprays, with pressurized contents, are not shippable by air.
Regulations may arbitrarily change over time, so instructions given in this catalog may not be accurate at a later date.
TERMS and CONDITONS
MOST OF THE ORDERS WE RECEIVE ARE SHIPPED WITHIN 24 HOURS OF THE TIME THEY ARE PLACED. When you place an order, it will be given prompt and
efficient attention. Where possible, give us your customer number, and item numbers. This helps us to help you with greater speed and accuracy.
Taxes
Sales taxes are not charged on orders shipped outside the State of New Mexico (EXCEPTION - State of Arizona, due to our participation in Tucson Gem and
Mineral Show). Unless a New Mexico non-taxable transaction certificate is given with the order or is on file at Indian Jewelers Supply Co., sales within the State
of New Mexico are subject to state sales tax.
Special Orders
Lead time, prepayment, and minimums may apply. Communicate with us well ahead of time, if you can. Some special orders will require payment in advance.
Special orders are not returnable. You will be responsible for the accuracy of your contact information, and the timely retrieval of communications regarding
your special order.
TERMS and CONDITIONS
469
10% Restocking Fees
HOLD-FOR-PAYMENT orders held for over 15 calendar days will be charged a 10% restocking fee. Any shipping charges incurred will still be payable. No further shipments will be made until these charges are paid in full. U.P.S. and the Postal Service hold packages for a VERY limited time. We can re-ship packages
on your request, and you will be liable for the additional shipping charges. The restock charge also applies to returns made for reasons other than I.J.S. errors
or faulty goods. UNCLAIMED C.O.D.’s returned to I.J.S. will be charged the 10% restocking fee when the items are returned to stock. We would rather not need
to restock and levy the fee.
Shortage - Damage - Mis-shipment Claims
Discuss damages with the carrier (U.P.S., Postal Service, etc.) as soon as possible. Please inspect the package thoroughly and report any damage before you
sign for it. To establish a claim on goods improperly shipped or damaged, you must notify I.J.S. within 10 days after receipt of the goods. After 10 days, notifications will be treated as normal returns. Shortage claims must be made within ten business days after receipt of shipment.
Returns
Returns must be accompanied by a copy of the relevant invoice and a brief explanatory note. For returns made 30 calendar days after merchandise receipt,
invoice and note must be included, and 10% restocking fees will be levied. Returned merchandise received by I.J.S. with insufficient written information may
be refused and shipped back to
you. Send returns to Indian Jewelers Supply, 601 E. Coal Avenue, Gallup, NM 87301. For your protection, ship all returns prepaid and insured. We will refund
your return postage when appropriate.
Liability
Indian Jewelers Supply Company disclaims any responsibility for damage or personal injury resulting from products being used improperly or
from being repaired or modified by others or from abuse or use beyond normal product life expectancy.
Specifications of the goods listed will be maintained wherever possible, but we reserve the right to make changes when necessary. Errors and
omissions excepted.
!! CAUTION !! ----- !! CAUTION !!
Indian Jewelers Supply Co. offers for sale a variety of tools, supplies, chemicals and equipment for the purpose of jewelry making. We assume that purchasers are trained in the use of those products and are competent to safely use, adjust, and make minor repairs to the equipment. Indian Jewelers Supply Company accepts no liability for the use of those products, for the consequential damage or injury caused by their improper use, or the failure to use procedures
and protective gear generally accepted as necessary for specific shop processes. If any product or supply appears to be defective, it should be inspected by
an authorized dealer or returned to Indian Jewelers Supply for inspection, repair or replacement. Any further use of the product is at the user’s sole risk, and
the user assumes full responsibility and liability.
WHOOPS!
We make every effort to be exact with our photography, specifications and copy. We also hold prices for as long as we can. Sometimes errors do occur and
we apologize for them. We reserve the right to make changes and correct errors to products and specifications at any time. We also reserve the right to limit
quantities and change pricing.
Thank you for your understanding.
Credit Policy -- Effective January 1, 2000
The credit terms offered by Indian Jewelers Supply Co. are as follows:
1) You will be furnished with a monthly statement of your account, including all transactions through the last business day of each month.
2) Current charges listed on your statement are due the 10th day of the month following purchase.
3) If payment is received on or before the 25th day of the month following purchase, no finance charge will be imposed.
4) Amounts not paid by the 25th of the month following purchase will be assessed a finance charge of at the rate of 1.5% per month, which is an annual rate
of 18%, or the alternative minimum finance charge of $1.00, whichever is greater. The finance charge is calculated by subtracting from the balance owed at
the close of a month all payments and credits posted to the account during the current month and multiplying that balance by 1.5%.
6) These procedures and policies supersede all terms heretofore printed or published on invoices, ledger cards and catalogs of Indian Jewelers Supply Co. For
open accounts, payments for purchases are due the 10th of the month following purchase. Payment must be RECEIVED AT I.J.S. by the 25th day of the month
for purchases from the previous month to avoid a service charge. Checks presented to I.J.S. which are returned unpaid by the customers bank for any reason
will incur a $25.00 service charge. If two or more checks are returned unpaid, we will no longer accept checks from that person. Future orders will be sent on
“C.O.D., Cash-only” basis.
TERMS and CONDITONS
5) If payment is not received by the close of the month following purchase, the account may be placed on a “C.O.D.” or “CASHONLY”
basis at the option of Indian Jewelers Supply Co. until all charges, including finance charges, are received.
470
FORMS
CHECKWRITING AUTHORIZATION
Indian Jewelers Supply Co - P.O. Box 1774, Gallup, NM 87305-1774 Phone: 1-800-545-6540 or 1-505-722-4451
To The Customer:
In order to accept checks, we require this form to be completed. Please complete Section I, sign the authorization, and return it
to Indian Jewelers Supply, Accounting Department at the address listed above. Only applications which have all information provided
will be considered.
Upon approval, you will be allowed to use checks on the approved bank to receive COD and Hold for Check Orders. If a check
is returned by the bank for any reason, You will be charged a $25.00 service charge, and the check will be redeposited. If the check is
returned a 2nd time, service will be suspended until all balances are cleared. If checks are returned repeatedly, your check writing privilege
will be revoked.
Name ___________________________________________________________________ ĲS Customer Number _______________________
Address _____________________________________________________________________________________________________________
City _____________________________________________ State _________________ Zip ___________________________________
Telephone: DAY _________________________________ EVENING ______________________________
Bank Name ________________________________________________________ Account Number __________________________________
Address: _____________________________________________________________________________________________________________
City ______________________________________________ State ________________________ Zip ___________________________
Bank Phone Number: __________________________________________
Bank Officer __________________________________________________________________________________________________________
Authorization To Release Information
To My Bank:
I Authorize you to release the following information to Indian Jewelers Supply Company.
Signed ____________________________________________________________ Date __________________________
*******************************Bank Use Only *********************************************************************
Please supply the information below and return to:
Attn. Accounting Department, I.J.S. , P.O. Box 1774, Gallup, NM 87305-1774
FAX: 1-888-722-4172 or 1-505-722-4172
Date the account was established __________________________
Average Number of items cleared monthly ____________________
Number of items returned in the last 24 months ________________
Signed ____________________________________________ Date _______________________________________
FORMS
Title ___________________________________________________________________________________________
FORMS
471
CONFIDENTIAL CREDIT APPLICATION ******* part 1 of 2 **********************
AMOUNT OF CREDIT DESIRED $_____________ DATE:_____________________________
NAME OF BUSINESS OR INDIVIDUAL:______________________________________________________________________________
STATE SALES TAX #:____________________________ ACCTS PAYABLE manager:_____________________________________
AT PRESENT LOCATION SINCE:____________ PHONE:_______________________________FAX:________________________
STREET ADDRESS, CITY, STATE, ZIP:_______________________________________________________________________________
MAILING ADDRESS, CITY, STATE, ZIP:______________________________________________________________________________
FROM THE 4 SELECTIONS BELOW, CHOOSE YOUR TYPE OF BUSINESS. IF APPLYING AS AN INDIVIDUAL, CHOOSE INDIVIDUAL.
•CORPORATION**********************************
•INDIVIDUAL**************************************
President:_____________________________________________
Name:__________________________________________________
Vice-president:_________________________________________
SS#:___________________________DOB:____________________
Secretary/Treasurer:______________________________________
•PROPRIETORSHIP********************************
•PARTNERSHIP**********************************
Name of proprietor:__________________________________________
Name of partner_______________________________________
SS#:__________________________DOB:________________________
SS#:___________________________DOB:___________________
Spouse:___________________________________________________
Name of partner________________________________________
SS#:__________________________DOB:________________________
SS#:___________________________DOB:____________________
Name of partner_______________________________________
SS#:___________________________DOB:_____________________
CREDIT REFERENCES ***********************************
NAME:____________________________________________________
NAME:_________________________________________________
MAILING. ADDRESS:________________________________________
MAILING ADDRESS:____________________________________
CITY, STATE, ZIP:___________________________________________
CITY, STATE, ZIP:_____________________________________
ACCOUNT NUMBER:_______________________________________
ACCOUNT NUMBER:___________________________________
NAME:____________________________________________________
NAME:_________________________________________________
ST. ADDRESS:______________________________________________
ST. ADDRESS:_________________________________________
CITY, STATE, ZIP:___________________________________________
CITY, STATE, ZIP:______________________________________
ACCOUNT NUMBER:_______________________________________
ACCOUNT NUMBER:__________________________________
BANK INFORMATION
BANK:________________________________________
MAILING ADDRESS:________________________________________
MAILING ADDRESS:______________________________
CITY, STATE, ZIP:___________________________________________
CITY, STATE, ZIP:________________________________
ACCOUNT NUMBER:_______________________________________
ACCOUNT NUMBER:_____________________________
By signing, I authorize banks and references above to release credit information to Indian Jewelers Supply Co., Inc.
Signature of applicant:____________________________________________________ , Date:________________________
Above name printed or typed:_______________________________________________ Title:__________________________
Continueded on next page...
FORMS
BANK:____________________________________________________
472
FORMS
AGREEMENT TO CREDIT TERMS ************** part 2 of 2 *************************
This agreement for open account is made by and between Indian Jewelers Supply Co. and __________________________________
(Name of Business)
through its duly authorized representative ________________________________________, as ________________________________
(Name)
(Title)
individually hereinafter referred to as Applicant(s) this ___________ day of __________________________________________.
(Month and Year)
1. Applicant(s) agree that full advisement and disclosure has been made of the open account policies of Indian Jewelers Supply Co.
dated 1 January 2000 (OVERLEAF) with which applicant(s) will comply.
2. Applicant(s) further agree that in the event that the account with Indian Jewelers Supply Co. becomes delinquent, Applicant(s)
hereby bind themselves to pay a Delinquent Account Service Charge at the rate then in effect for delinquent accounts as set by Indian
Jewelers Supply Co.
3. Applicant(s) further agree that in the event the account with Indian Jewelers Supply becomes delinquent they as guarantor(s), shall
be liable for the unpaid invoice amounts, delinquent account service charges, all costs of collection including but not limited to Court costs
and attorney’s fees.
Name of business___________________________________________________
Business Address___________________________________________________________________________________________
X________________________________________________________________
Signature of authorized representative and personal guarantor
Home address:_____________________________________________________________________________________________
ACKNOWLEDGEMENT FOR AN INDIVIDUAL •••••••••••••••••••••••••••••••••••
State of _______________________ County of __________________________
The foregoing instrument was subscribed, sworn to and acknowledged before me by:
______________________________________ on this _____________ day of ______________________________________
(Name of individual)
(Month, Year)
My commission expires: _______________________________________________________
(SEAL) Notary Public
ACKNOWLEDGEMENT FOR CORPORATIONS•••••••••••••••••••••••••••••••••
The foregoing instrument was acknowledged before me on this _________ day of ________________________________
(Month, Year)
FORMS
by ____________________________________ , _____________________________________ , of ____________________________________ ,
(Name of officer)
(Title of officer)
(Name of corporation acknowledging)
a _____________________________________ corporation, on behalf of the corporation.
(State or county of incorporation)
My commission expires: ________________________________________________________
(SEAL) Notary Public
- NOTES -
- NOTES -
- NOTES -
P.O. Box 1774
Gallup, NM 87305-1774

Indian Jewelers Supply Main Catalog Volume 2: Findings, Stones

Transcription

Similar documents

Ceiling Medallions - Trim-Tex

christmas brochure

astodia - Stihler Electronic

portable usb dj mixer + scratch controll er + dj software

cervical spoon spray for citology fixation and slides hysterometer

Intarsia Workshops Intarsia Kits Beginner Patterns

Heart Failure 2016 Catering for stands

safety recall

880 ST - Flipper Marin

cost-effective oils, boat and car washes, wiper blades