ER/TG Collet Catalog

CV40 & CV50 ER COLLET CHUCKS 50
BT30 & BT40 ER COLLET CHUCKS 51
HSK50A, HSK63A & HSK100A ER COLLET CHUCKS 52
HSK32E & HSK40E ER COLLET CHUCKS
53
HSK63F & HSK80F COLLET CHUCKS 53
CV40 & CV50 ER MINI COLLET CHUCKS 54
BT30 & BT40 ER MINI COLLET CHUCKS
54
ER COLLET EXTENSIONS
55
ER COLLETS, RACKS, KITS & ACCESSORIES
56-71
CV40 & CV50 TG COLLET CHUCKS
72
BT40 TG COLLET CHUCKS
72
TG COLLETS, RACKS, KITS & ACCESSORIES
73-77
49
Linking Productivity and Precision
CV40 & CV50 ER COLLET CHUCKS
ØDLL1
Part NumberTaperCollet CapacityCollet Series
CV40-ER11-65
CV40-ER11-100
CV40-ER11-160
CV40-ER16-65
CV40-ER16-100
CV40-ER16-160
CV40-ER20-65
CV40-ER20-100
CV40-ER20-160
CV40-ER25-65
CV40-ER25-100
CV40-ER25-160
CV40-ER32-65
CV40-ER32-100
CV40-ER32-160
CV40-ER40-70
CV40-ER40-100
CV40-ER40-160
CV50-ER16-100
CV50-ER16-160
CV50-ER20-100
CV50-ER20-160
CV50-ER25-100
CV50-ER25-160
CV50-ER32-100
CV50-ER32-160
CV50-ER40-100
CV50-ER40-160
CV40
CV40
CV40
CV40
CV40
CV40
CV40
CV40
CV40
CV40
CV40
CV40
CV40
CV40
CV40
CV40
CV40
CV40
CV50
CV50
CV50
CV50
CV50
CV50
CV50
CV50
CV50
CV50
.019 - .275” (.5-7.0mm)
.019 - .275” (.5-7.0mm)
.019 - .275” (.5-7.0mm)
.019 - .406” (.5-10.0mm)
.019 - .406” (.5-10.0mm)
.019 - .406” (.5-10.0mm)
.039 - .511” (1-13.0mm)
.039 - .511” (1-13.0mm)
.039 - .511” (1-13.0mm)
.039 - .630” (1-16.0mm)
.039 - .630” (1-16.0mm)
.039 - .630” (1-16.0mm)
.078 - .787” (2-20.0mm)
.078 - .787” (2-20.0mm)
.078 - .787” (2-20.0mm)
.118 - 1.023” (3-26.0mm)
.118 - 1.023” (3-26.0mm)
.118 - 1.023” (3-26.0mm)
.019 - .406” (.5-10.0mm)
.019 - .406” (.5-10.0mm)
.039 - .511” (1-13.0mm)
.039 - .511” (1-13.0mm)
.039 - .630” (1-16.0mm)
.039 - .630” (1-16.0mm)
.078 - .787” (2-20.0mm)
.078 - .787” (2-20.0mm)
.118 - 1.023” (3-26.0mm)
.118 - 1.023” (3-26.0mm)
ER11
ER11
ER11
ER16
ER16
ER16
ER20
ER20
ER20
ER25
ER25
ER25
ER32
ER32
ER32
ER40
ER40
ER40
ER16
ER16
ER20
ER20
ER25
ER25
ER32
ER32
ER40
ER40
.75”
.75”
.75”
1.10”
1.10”
1.10”
1.34”
1.34”
1.34”
1.65”
1.65”
1.65”
1.97”
1.97”
1.97”
2.48”
2.48”
2.48”
1.10”
1.10”
1.34”
1.34”
1.65”
1.65”
1.97”
1.97”
2.48”
2.48”
2.55”
3.93”
6.29”
2.55”
3.93”
6.29”
2.55”
3.93”
6.29”
2.55”
3.93”
6.29”
2.55”
3.93”
6.29”
2.75”
3.93”
6.29”
3.93”
6.29”
3.93”
6.29”
3.93”
6.29”
3.93”
6.29”
3.93”
6.29”
.83”
.83”
.83”
1.26”
1.26”
1.26”
1.42”
1.42”
1.42”
1.57”
1.57”
1.57”
1.81”
1.81”
1.81”
2.05”
2.05”
2.05”
1.26”
1.26”
1.42”
1.42”
1.57”
1.57”
1.81”
1.81”
2.05”
2.05”
NOTES: • ER11, ER16 & ER20 COLLET CHUCKS INCLUDE HEX NUTS. ROUND NUTS ARE AVAILABLE UPON REQUEST.
• ALL COLLET CHUCKS ARE PROVIDED WITH COLLET NUTS AND ADJUSTMENT SCREWS
• COLLET CHUCKS ARE PRE-BALANCED TO G2.5 @ 20,000RPM.
• COLLET CHUCK WRENCHES AND REPLACEMENT NUTS ARE LISTED ON PAGES 70 - 71.
• FORM B COOLANT THROUGH THE FLANGE IS AVAILABLE UPON REQUEST.
• ER COLLETS ARE LISTED ON PAGES 57 - 67.
50
www.eri-america.com 877.374.8005 847.550.9710
BT30 & BT40 ER COLLET CHUCKS
Part NumberTaperCollet CapacityCollet Series
BT30-ER11-55
BT30-ER11-100
BT30-ER16-60
BT30-ER16-100
BT30-ER20-65
BT30-ER20-100
BT30-ER25-65
BT30-ER25-100
BT30-ER32-70
BT30-ER32-100
BT40-ER11-70
BT40-ER11-100
BT40-ER11-160
BT40-ER16-70
BT40-ER16-100
BT40-ER16-160
BT40-ER20-70
BT40-ER20-100
BT40-ER20-160
BT40-ER25-70
BT40-ER25-100
BT40-ER25-160
BT40-ER32-70
BT40-ER32-100
BT40-ER32-160
BT40-ER40-70
BT40-ER40-100
BT40-ER40-160
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
.019 - .275” (.5-7.0mm)
.019 - .275” (.5-7.0mm)
.019 - .406” (.5-10.0mm)
.019 - .406” (.5-10.0mm)
.039 - .511” (1-13.0mm)
.039 - .511” (1-13.0mm)
.039 - .630” (1-16.0mm)
.039 - .630” (1-16.0mm)
.078 - .787” (2-20.0mm)
.078 - .787” (2-20.0mm)
.019 - .275” (.5-7.0mm)
.019 - .275” (.5-7.0mm)
.019 - .275” (.5-7.0mm)
.019 - .406” (.5-10.0mm)
.019 - .406” (.5-10.0mm)
.019 - .406” (.5-10.0mm)
.039 - .511” (1-13.0mm)
.039 - .511” (1-13.0mm)
.039 - .511” (1-13.0mm)
.039 - .630” (1-16.0mm)
.039 - .630” (1-16.0mm)
.039 - .630” (1-16.0mm)
.078 - .787” (2-20.0mm)
.078 - .787” (2-20.0mm)
.078 - .787” (2-20.0mm)
.118 - 1.023” (3-26.0mm)
.118 - 1.023” (3-26.0mm)
.118 - 1.023” (3-26.0mm)
ER11
ER11
ER16
ER16
ER20
ER20
ER25
ER25
ER32
ER32
ER11
ER11
ER11
ER16
ER16
ER16
ER20
ER20
ER20
ER25
ER25
ER25
ER32
ER32
ER32
ER40
ER40
ER40
ØDLL1
.75”
.75”
1.10”
1.10”
1.34”
1.34”
1.65”
1.65”
1.97”
1.97”
.75”
.75”
.75”
1.10”
1.10”
1.10”
1.34”
1.34”
1.34”
1.65”
1.65”
1.65”
1.97”
1.97”
1.97”
2.48”
2.48”
2.48”
2.16”
3.93”
2.36”
3.93”
2.55”
3.93”
2.55”
3.93”
2.75”
3.93”
2.75”
3.93”
6.29”
2.75”
3.93”
6.29”
2.75”
3.93”
6.29”
2.75”
3.93”
6.29”
2.75”
3.93”
6.29”
2.75”
3.93”
6.29”
.83”
.83”
1.26”
1.26”
1.42”
1.42”
1.57”
1.57”
1.81”
1.81”
.83”
.83”
.83”
1.26”
1.26”
1.26”
1.42”
1.42”
1.42”
1.57”
1.57”
1.57”
1.81”
1.81”
1.81”
2.05”
2.05”
2.05”
NOTES: • ER11, ER16 & ER20 COLLET CHUCKS INCLUDE HEX NUTS. ROUND NUTS ARE AVAILABLE UPON REQUEST.
• ALL COLLET CHUCKS ARE PROVIDED WITH COLLET NUTS AND ADJUSTMENT SCREWS
• COLLET CHUCKS ARE PRE-BALANCED TO G2.5 @ 20,000RPM.
• COLLET CHUCK WRENCHES AND REPLACEMENT NUTS ARE LISTED ON PAGES 70 - 71.
• FORM B COOLANT THROUGH THE FLANGE IS AVAILABLE UPON REQUEST.
• ER COLLETS ARE LISTED ON PAGES 57 - 67.
51
Linking Productivity and Precision
HSK50A, HSK63A & HSK100A ER COLLET CHUCKS
ØDLL1
Part NumberTaperCollet CapacityCollet Series
HSK50A-ER16-100
HSK50A-ER25-100
HSK50A-ER32-100
HSK63A-ER11-100
HSK63A-ER11-160
HSK63A-ER16-100
HSK63A-ER16-160
HSK63A-ER20-100
HSK63A-ER20-160
HSK63A-ER25-100
HSK63A-ER25-160
HSK63A-ER32-100
HSK63A-ER32-160
HSK63A-ER40-100
HSK63A-ER40-160
HSK100A-ER16-100
HSK100A-ER16-160
HSK100A-ER20-100
HSK100A-ER20-160
HSK100A-ER25-100
HSK100A-ER25-160
HSK100A-ER32-100
HSK100A-ER32-160
HSK100A-ER40-100
HSK100A-ER40-160
HSK50A
HSK50A HSK50A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
.019 - .406” (.5-10.0mm)
.039 - .630” (1-16.0mm)
.078 - .787” (2-20.0mm)
.019 - .275” (.5-7.0mm)
.019 - .275” (.5-7.0mm)
.019 - .406” (.5-10.0mm)
.019 - .406” (.5-10.0mm)
.039 - .511” (1-13.0mm)
.039 - .511” (1-13.0mm)
.039 - .630” (1-16.0mm)
.039 - .630” (1-16.0mm)
.078 - .787” (2-20.0mm)
.078 - .787” (2-20.0mm)
.118 - 1.023” (3-26.0mm)
.118 - 1.023” (3-26.0mm)
.019 - .406” (.5-10.0mm)
.019 - .406” (.5-10.0mm)
.039 - .511” (1-13.0mm)
.039 - .511” (1-13.0mm)
.039 - .630” (1-16.0mm)
.039 - .630” (1-16.0mm)
.078 - .787” (2-20.0mm)
.078 - .787” (2-20.0mm)
.118 - 1.023” (3-26.0mm)
.118 - 1.023” (3-26.0mm)
ER16
ER25
ER32
ER11
ER11
ER16
ER16
ER20
ER20
ER25
ER25
ER32
ER32
ER40
ER40
ER16
ER16
ER20
ER20
ER25
ER25
ER32
ER32
ER40
ER40
1.10”
1.65”
1.97”
.75”
.75”
1.10”
1.10”
1.34”
1.34”
1.65”
1.65”
1.97”
1.97”
2.48”
2.48”
1.10”
1.10”
1.34”
1.34”
1.65”
1.65”
1.97”
1.97”
2.48”
2.48”
3.93”
2.55”
2.55”
3.93”
6.29”
3.93”
6.29”
3.93”
6.29”
3.93”
6.29”
3.93”
6.29”
3.93”
6.29”
3.93”
6.29”
3.93”
6.29”
3.93”
6.29”
3.93”
6.29”
3.93”
6.29”
1.26”
1.57”
1.81”
.65”
.65”
1.26”
1.26”
1.42”
1.42”
1.57”
1.57”
1.81”
1.81”
2.05”
2.05”
1.26”
1.26”
1.42”
1.42”
1.57”
1.57”
1.81”
1.81”
2.05”
2.05”
NOTES: • ER11, ER16 & ER20 COLLET CHUCKS INCLUDE HEX NUTS. ROUND NUTS ARE AVAILABLE UPON REQUEST.
• ALL COLLET CHUCKS ARE PROVIDED WITH COLLET NUTS AND ADJUSTMENT SCREWS
• COLLET CHUCKS ARE PRE-BALANCED TO G2.5 @ 20,000RPM.
• COLLET CHUCK WRENCHES AND REPLACEMENT NUTS ARE LISTED ON PAGES 70 - 71.
• HOLDERS DO NOT INCLUDE COOLANT TUBES - COOLANT TUBES ARE LISTED ON PAGE 142.
• ER COLLETS ARE LISTED ON PAGES 57 - 67.
52
www.eri-america.com 877.374.8005 847.550.9710
HSK32E & HSK40E ER COLLET CHUCKS
Part NumberTaperCollet CapacityCollet Series
HSK32E-ER11-65
HSK32E-ER16-65
HSK40E-ER11-55
HSK40E-ER16-80
HSK40E-ER20-80
HSK40E-ER25-80
HSK32E
HSK32E
HSK40E
HSK40E
HSK40E
HSK40E
.019 - .275” (.5-7.0mm)
.019 - .406” (.5-10.0mm)
.019 - .275” (.5-7.0mm)
.019 - .406” (.5-10.0mm)
.039 - .511” (1-13.0mm)
.039 - .630” (1-16.0mm)
ER11
ER16
ER11
ER16
ER20
ER25
ØDLL1
.63”
.87”
.63”
.87”
1.10”
1.37”
2.55”
2.55”
2.16”
3.14”
3.14”
3.14”
.83”
1.26”
.83”
1.26”
1.42”
1.57”
NOTES: • COLLET CHUCKS UTILIZE MINI NUTS
• ALL COLLET CHUCKS ARE PROVIDED WITH COLLET NUTS AND ADJUSTMENT SCREWS
• COLLET CHUCKS ARE PRE-BALANCED TO G2.5 @ 30,000RPM.
• HOLDERS DO NOT INCLUDE COOLANT TUBES - COOLANT TUBES ARE LISTED ON PAGE 142.
• ER COLLETS ARE LISTED ON PAGES 57 - 67.
HSK63F & HSK80F ER COLLET CHUCKS
Part NumberTaperCollet CapacityCollet Series
HSK63F-ER16-100
HSK63F-ER20-100
HSK63F-ER25-100
HSK63F-ER32-100
HSK80F-ER16-100
HSK80F-ER20-100
HSK80F-ER25-100
HSK80F-ER32-100
HSK63F
HSK63F
HSK63F
HSK63F
HSK80F
HSK80F
HSK80F
HSK80F
.019 - .406” (.5-10.0mm)
.039 - .511” (1-13.0mm)
.039 - .630” (1-16.0mm)
.078 - .787” (2-20.0mm)
.019 - .406” (.5-10.0mm)
.039 - .511” (1-13.0mm)
.039 - .630” (1-16.0mm)
.078 - .787” (2-20.0mm)
ER16
ER20
ER25
ER32
ER16
ER20
ER25
ER32
ØDLL1
.87”
1.10”
1.65”
1.97”
.87”
1.10”
1.65”
1.97”
3.93”
3.93”
3.93”
3.93”
3.93”
3.93”
3.93”
3.93”
1.26”
1.42”
1.57”
1.81”
1.26”
1.42”
1.57”
1.81”
NOTES: • ER16 & ER20 COLLET CHUCKS UTILIZE MINI NUTS
• ALL COLLET CHUCKS ARE PROVIDED WITH COLLET NUTS AND ADJUSTMENT SCREWS
• COLLET CHUCKS ARE PRE-BALANCED TO G2.5 @ 30,000RPM.
• HOLDERS DO NOT INCLUDE COOLANT TUBES - COOLANT TUBES ARE LISTED ON PAGE 142.
• ER COLLETS ARE LISTED ON PAGES 57 - 67.
53
Linking Productivity and Precision
CV40 & CV50 ER MINI COLLET CHUCKS
ØDLL1
Part NumberTaperCollet CapacityCollet Series
CV40-ERM11-130
CV40-ERM11-160
CV40-ERM16-130
CV40-ERM16-160
CV40-ERM20-130
CV40-ERM20-160
CV40-ERM25-130
CV40-ERM25-160
CV50-ERM16-130
CV50-ERM16-160
CV50-ERM20-130
CV50-ERM20-160
CV50-ERM25-130
CV50-ERM25-160
CV40
CV40
CV40
CV40
CV40
CV40
CV40
CV40
CV50
CV50
CV50
CV50
CV50
CV50
.019 - .275” (.5-7.0mm)
.019 - .275” (.5-7.0mm)
.019 - .406” (.5-10.0mm)
.019 - .406” (.5-10.0mm)
.039 - .511” (1-13.0mm)
.039 - .511” (1-13.0mm)
.039 - .630” (1-16.0mm)
.039 - .630” (1-16.0mm)
.019 - .406” (.5-10.0mm)
.019 - .406” (.5-10.0mm)
.039 - .511” (1-13.0mm)
.039 - .511” (1-13.0mm)
.039 - .630” (1-16.0mm)
.039 - .630” (1-16.0mm)
ER11
ER11
ER16
ER16
ER20
ER20
ER25
ER25
ER16
ER16
ER20
ER20
ER25
ER25
.63”
.63”
.87”
.87”
1.10”
1.10”
1.38”
1.38”
.87”
.87”
1.10”
1.10”
1.38”
1.38”
5.11”
6.29”
5.11”
6.29”
5.11”
6.29”
5.11”
6.29”
5.11”
6.29”
5.11”
6.29”
5.11”
6.29”
.83”
.83”
1.26”
1.26”
1.42”
1.42”
1.57”
1.57”
1.26”
1.26”
1.42”
1.42”
1.57”
1.57”
BT30 & BT40 ER MINI COLLET CHUCKS
ØDLL1
Part NumberTaperCollet CapacityCollet Series
BT30-ERM11-130
BT30-ERM16-130
BT30-ERM20-130
BT40-ERM11-130
BT40-ERM11-160
BT40-ERM16-130
BT40-ERM16-160
BT40-ERM20-130
BT40-ERM20-160
BT40-ERM25-130
BT40-ERM25-160
BT30
BT30
BT30
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
.019 - .275” (.5-7.0mm)
.019 - .406” (.5-10.0mm)
.039 - .511” (1-13.0mm)
.019 - .275” (.5-7.0mm)
.019 - .275” (.5-7.0mm)
.019 - .406” (.5-10.0mm)
.019 - .406” (.5-10.0mm)
.039 - .511” (1-13.0mm)
.039 - .511” (1-13.0mm)
.039 - .630” (1-16.0mm)
.039 - .630” (1-16.0mm)
ER11
ER16
ER20
ER11
ER11
ER16
ER16
ER20
ER20
ER25
ER25
.63”
.87”
1.10”
.63”
.63”
.87”
.87”
1.10”
1.10”
1.38”
1.38”
NOTES: • ER MINI CHUCKS UTILIZE MINI CHUCK NUTS
• MINI NUTS REQUIRE ERM WRENCHES LISTED ON PAGE 70.
• COLLET CHUCKS ARE PRE-BALANCED TO G2.5 @ 20,000RPM.
• ER COLLETS ARE LISTED ON PAGES 57 - 67.
54
www.eri-america.com 877.374.8005 847.550.9710
5.11”
5.11”
5.11”
5.11”
6.29”
5.11”
6.29”
5.11”
6.29”
5.11”
6.29”
.83”
1.26”
1.42”
.83”
.83”
1.26”
1.26”
1.42”
1.42”
1.57”
1.57”
STRAIGHT SHANK ER COLLET EXTENSIONS
Part NumberCollet CapacityCollet Series
SS0500-ERM11-6.00
SS0625-ERM11-6.00
SS0750-ERM11-6.00
SS0500-ERM16-6.00
SS0625-ERM16-6.00
SS0750-ERM16-6.00
SS0750-ERM20-6.00
SS1000-ERM20-6.00
SS0750-ERM25-6.00
SS1000-ERM25-6.00
SS1000-ER32-4.00
SS1250-ER32-4.00
SS1250-ER32-6.00
.019 - .275” (.5-7.0mm)
.019 - .275” (.5-7.0mm)
.019 - .275” (.5-7.0mm)
.019 - .406” (.5-10.0mm)
.019 - .406” (.5-10.0mm)
.019 - .406” (.5-10.0mm)
.039 - .511” (1-13.0mm)
.039 - .511” (1-13.0mm)
.039 - .630” (1-16.0mm)
.039 - .630” (1-16.0mm)
.078 - .787” (2-20.0mm)
.078 - .787” (2-20.0mm)
.078 - .787” (2-20.0mm)
ER11
ER11
ER11
ER16
ER16
ER16
ER20
ER20
ER25
ER25
ER32
ER32
ER32
ØDLL1
1/2”
5/8”
3/4”
1/2”
5/8”
3/4”
3/4”
1”
3/4”
1”
1”
1-1/4”
1-1/4”
6.00”
6.00”
6.00”
6.00”
6.00”
6.00”
6.00”
6.00”
6.00”
6.00”
4.00”
4.00”
6.00”
.83”
.83”
.83”
1.26”
1.26”
1.26”
1.42”
1.42”
1.65”
1.65”
1.81”
1.81”
1.81”
D1L2
.63”
.63”
.63”
.87”
.87”
.87”
1.10”
1.10”
1.38”
1.38”
1.97”
1.97”
1.97”
7.10”
7.10”
7.10”
7.44”
7.44”
7.44”
7.79”
7.79”
7.83”
7.83”
6.27”
6.27”
8.27”
NOTES: • ERM DENOTES COLLET CHUCK EXTENSIONS WITH MINI NUTS.
• MINI NUTS REQUIRE ERM WRENCHES LISTED ON PAGE 70.
ER COLLET CHUCK TIGHTENING TORQUES
Nut Part NumberCollet SeriesCollet Nut ØMax. Tightening Torque
ERM11-NUT
ER11-HNUT
ERM16-NUT
ER16-HNUT
ER16-RNUT
ER16-BBNUT
ERM20-NUT
ER20-HNUT
ER20-RNUT
ER20-BBNUT
ER25-RNUT
ER25-BBNUT
ER32-RNUT
ER32-BBNUT
ER40-RNUT
ER40-BBNUT
ER11
ER11
ER16
ER16
ER16
ER16
ER20
ER20
ER20
ER20
ER25
ER25
ER32
ER32
ER40
ER40
.63”
.75”
.87”
1.10”
1.26”
1.25”
1.10”
1.34”
1.38”
1.42”
1.65”
1.69”
1.97”
2.01”
2.48”
2.48”
11 ft. lbs.
15 ft. lbs.
22 ft. lbs.
37 ft. lbs.
37 ft. lbs.
29 ft. lbs.
29 ft. lbs.
60 ft. lbs.
60 ft. lbs.
37 ft. lbs.
75 ft. lbs.
47 ft. lbs.
100 ft. lbs.
54 ft. lbs.
120 ft. lbs.
66 ft. lbs.
NOTES: • IMPROPER TIGHTENING TORQUE ON COLLET NUT MAY AFFECT COLLET ACCURACY.
• EXCESSIVE TIGHTENING TORQUE WILL DAMAGE THE COLLET CHUCK, COLLET NUT AND/OR COLLET.
55
Linking Productivity and Precision
ER COLLETS
ER Collet Types:
ER Standard Collets:
• Provide good grip and accuracy for all drilling and reaming application.
• Wide clamping range - up to .040” (1mm) of collapse on most collets.
• Available in both inch and metric sizes.
• Manufactured to DIN 6499 Class 2 Accuracy or better.
• Available in High Precision - Class 1 Accuracy upon request.
ER Coolant Collets:
• Provide mechanical seal - no need for special discs, nuts, or adjustment screws.
• Seal up to 1,000 PSI.
• All steel construction means no rubber degradation.
• Collapse from .1 - .5mm according to size.
• Compatible with all standard ER Collet Chucks and Extensions.
ER Tap Collets:
• Compatible with all standard ER Collet Chucks and Extensions.
• Designed to hold taps on tap shank and square to eliminate slippage.
• Available in both inch and metric sizes.
ER Coolant Tap Collets:
• Provide mechanical seal - no need for special discs, nuts, or adjustment screws.
• Seal up to 1,000 PSI.
• Compatible with all standard ER Collet Chucks and Extensions.
• Designed to hold taps on tap shank and square to eliminate slippage.
• Available in both inch and metric sizes.
56
www.eri-america.com 877.374.8005 847.550.9710
ER11 COLLETS - INCH
Part
ER11-0062
ER11-0093
ER11-0125
ER11-0156
ER11-0187
ER11-0218
ER11-0250
ER11 COLLETS - METRIC
numberCollet sizeClamping range
1/16”
3/32”
1/8”
5/32”
3/16”
7/32”
1/4”
.043 - .062”
.074 - .093”
.106 - .125”
.137 - .156”
.168 - .187”
.199 - .218”
.231 - .250”
NOTES: • HIGH PRECISION COLLETS ARE AVAILABLE UPON
REQUEST (ADD H.P. TO PART NUMBER)
Part
numberCollet sizeClamping range
ER11-0039
ER11-0059
ER11-0078
ER11-0098
ER11-0118
ER11-0137
ER11-0157
ER11-0177
ER11-0196
ER11-0216
ER11-0236
ER11-0255
ER11-0275
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
.020 - .039”
.039 - .059”
.059 - .078”
.078 - .098”
.098 - .118”
.118 - .137”
.137 - .157”
.157 - .177”
.177 - .196”
.196 - .216”
.216 - .236”
.236 - .255”
.255 - .275”
ER11 COLLET SETS
ER11-S007
ER11-S013
ERC11-S006
ERC11-S007
7 pc. ER11 Collet Set (1/16 - 1/4” x 32nds)
13 pc. ER11 Collet Set (1.0 - 7.0mm x .5mm)
6 pc. ER11 Coolant Collet Set (3/16 - 17/64” x 64ths)
7 pc. ER11 Coolant Collet Set (4.0 - 7.0mm x .5mm)
ER11 COOLANT COLLETS - INCH
Part
numberCollet sizeClamping range
ERC11-0187
ERC11-0203
ERC11-0218
ERC11-0234
ERC11-0250
ERC11-0265
3/16”
13/64”
7/32”
15/64”
1/4”
17/64”
.183 - .187”
.199 - .203”
.214 - .218”
.230 - .234”
.246 - .250”
.261 - .265”
NOTES: • SEALS COOLANT PRESSURE UP TO 1,000 PSI
• COLLETS SHOULD BE USED WITH CYLINDRICAL
SHANK TOOLS (NO FLATS).
• SHANKS SHOULD BE FULLY INSERTED
TO AVOID LEAKAGE.
ER11 COOLANT COLLETS - METRIC
Part
numberCollet sizeClamping range
ERC11-0157
ERC11-0177
ERC11-0196
ERC11-0216
ERC11-0236
ERC11-0255
ERC11-0275
4.0
4.5
5.0
5.5
6.0
6.5
7.0
.153 - .157”
.173 - .177”
.192 - .196”
.212 - .216”
.232 - .236”
.251 - .255”
.271 - .275”
57
Linking Productivity and Precision
ER16 COLLETS - INCH
Part
ER16-0062
ER16-0093
ER16-0125
ER16-0156
ER16-0187
ER16-0218
ER16-0250
ER16-0281
ER16-0312
ER16-0343
ER16-0375
ER16-0406
ER16 COLLETS - METRIC
numberCollet sizeClamping range
1/16”
3/32”
1/8”
5/32”
3/16”
7/32”
1/4”
9/32”
5/16”
11/32”
3/8”
13/32”
.042 - .062”
.073 - .093”
.105 - .125”
.136 - .156”
.167 - .187”
.198 - .218”
.230 - .250”
.261 - .281”
.292 - .312”
.323 - .343”
.355 - .375”
.386 - .406”
ER16 COLLET SETS
ER16-S009
9 pc. ER16 Collet Set (2.0 - 10.0mm x 1mm)
ER16-S012
12 pc. ER16 Collet Set (1/16 - 13/32” x 32nds)
ERC16-S013
13 pc. ER16 Coolant Collet Set (4.0 - 10.0mm)
ERC16-S014
14 pc. ER16 Coolant Collet Set (1/8 - 13/32”)
NOTES: • HIGH PRECISION COLLETS ARE AVAILABLE UPON
REQUEST (ADD H.P. TO PART NUMBER)
ER16 TAP COLLETS
Part
58
number
ERT16-141
ERT16-168
ERT16-194
ERT16-220
ERT16-255
ERT16-318
øD
.141”
.168”
.194”
.220”
.255”
.318”
Part
numberCollet sizeClamping range
ER16-0039
ER16-0059
ER16-0078
ER16-0098
ER16-0118
ER16-0137
ER16-0157
ER16-0177
ER16-0196
ER16-0216
ER16-0236
ER16-0255
ER16-0275
ER16-0295
ER16-0315
ER16-0334
ER16-0354
ER16-0374
ER16-0393
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
.019 - .039”
.039 - .059”
.059 - .078”
.078 - .098”
.098 - .118”
.118 - .137”
.137 - .157”
.157 - .177”
.177 - .196”
.196 - .216”
.216 - .236”
.236 - .255”
.255 - .275”
.275 - .295”
.295 - .315”
.315 - .334”
.334 - .354”
.354 - .374”
.374 - .393”
ER16 COOLANT TAP COLLETS
Sq. Tap Size
.110”
.131”
.152”
.165”
.191”
.238”
0 - #6 (M3)
#8, 5/32 (M4)
#10, 3/16 (M5)
#12, 7/32
#14, 1/4 (M6)
5/16 (M7, M8)
Part
number
ERTC16-255
ERTC16-318
øD
.255”
.318”
Sq. Tap Size
.191”
.238”
#14, 1/4 (M6)
5/16 (M7, M8)
NOTES: • COOLANT TAP COLLETS SEALS COOLANT
PRESSURE UP TO 1,000 PSI
• ADDITIONAL METRIC SIZES AVAILABLE UPON
REQUEST
www.eri-america.com 877.374.8005 847.550.9710
ER16 COOLANT COLLETS - INCH
Part
numberCollet sizeClamping range
ERC16-0125
ERC16-0140
ERC16-0156
ERC16-0171
ERC16-0187
ERC16-0203
ERC16-0218
ERC16-0234
ERC16-0250
ERC16-0281
ERC16-0312
ERC16-0343
ERC16-0375
ERC16-0406
1/8”
9/64”
5/32”
11/64”
3/16”
13/64”
7/32”
15/64”
1/4”
9/32”
5/16”
11/32”
3/8”
13/32”
.121 - .125”
.136 - .140”
.152 - .156”
.167 - .171”
.183 - .187”
.199 - .203”
.214 - .218”
.230 - .234”
.231 - .250”
.262 - .281”
.293 - .312”
.324 - .343”
.355 - .375”
.386 - .406”
ER16 COOLANT COLLETS - METRIC
Part
numberCollet sizeClamping range
ERC16-0157
ERC16-0177
ERC16-0196
ERC16-0216
ERC16-0236
ERC16-0255
ERC16-0275
ERC16-0295
ERC16-0315
ERC16-0334
ERC16-0354
ERC16-0374
ERC16-0393
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
.153 - .157”
.173 - .177”
.192 - .196”
.212 - .216”
.216 - .236”
.236 - .255”
.255 - .275”
.275 - .295”
.295 - .315”
.315 - .334”
.334 - .354”
.354 - .374”
.374 - .393”
NOTES: • COLLETS SHOULD BE USED WITH CYLINDRICAL SHANK TOOLS (NO FLATS).
• SHANKS SHOULD BE FULLY INSERTED TO AVOID LEAKAGE.
• SEALS COOLANT PRESSURE UP TO 1,000 PSI
59
Linking Productivity and Precision
ER20 COLLETS - INCH
Part
ER20-0062
ER20-0093
ER20-0125
ER20-0156
ER20-0187
ER20-0218
ER20-0250
ER20-0281
ER20-0312
ER20-0343
ER20-0375
ER20-0406
ER20-0437
ER20-0468
ER20-0500
ER20 COLLETS - METRIC
numberCollet sizeClamping range
1/16”
3/32”
1/8”
5/32”
3/16”
7/32”
1/4”
9/32”
5/16”
11/32”
3/8”
13/32”
7/16”
15/32”
1/2”
ER20-S007
ER20-S012
ER20-S013
ERC20-S016
ERC20-S018
60
number
ERT20-141
ERT20-168
ERT20-194
ERT20-220
ERT20-255
ERT20-318
ERT20-323
ERT20-367
ERT20-381
øD
.141”
.168”
.194”
.220”
.255”
.318”
.323”
.367”
.381”
7 pc. ER20 Collet Set (1/8 - 1/2”x 16ths)
12 pc. ER20 Collet Set (2.0 - 13.0mm x 1mm)
13 pc. ER20 Collet Set (1/8 - 1/2” x 32nds)
16 pc. ER20 Coolant Collet Set (1/8 - 1/2”)
18 pc. ER20 Coolant Collet Set (4.0 - 13.0mm)
ER20 COOLANT TAP COLLETS
Sq. Tap Size
.110”
.131”
.152”
.165”
.191”
.238”
.242”
.275”
.286”
numberCollet sizeClamping range
.042 - .062”
ER20-0039
1.0
.020 - .039”
.073 - .093”
ER20-0078
2.0
.059 - .078”
.086 - .125”
ER20-0118
3.0
.078 - .118”
.117 - .156”
ER20-0157
4.0
.118 - .157”
.148 - .187”
ER20-0196
5.0
.157 - .196”
.179 - .218”
ER20-0236
6.0
.196 - .236”
.211 - .250”
ER20-0275
7.0
.236 - .275”
.242 - .281”
ER20-0315
8.0
.275 - .315”
.273 - .312”
ER20-0354
9.0
.315 - .354”
.304 - .343”
ER20-0393
10.0
.354 - .393”
.336 - .375”
ER20-0433
11.0
.393 - .433”
.367 - .406”
ER20-0472
12.0
.433 - .472”
.398 - .437”
ER20-0511
13.0
.472 - .511”
NOTES: • HIGH PRECISION COLLETS ARE AVAILABLE UPON
.429 - .468”
REQUEST (ADD H.P. TO PART NUMBER)
.461 - .500”
ER20 COLLET SETS
ER20 TAP COLLETS
Part
Part
0 - #6 (M3)
#8, 5/32 (M4)
#10, 3/16 (M5)
#12, 7/32
#14, 1/4 (M6)
5/16 (M7, M8)
7/16
1/2 (M12)
3/8 (M10)
Part
number
ERTC20-255
ERTC20-318
ERTC20-323
ERTC20-367
ERTC20-381
øD
.255”
.318”
.323”
.367”
.381”
Sq. Tap Size
.191”
.238”
.242”
.275”
.286”
#14, 1/4 (M6)
5/16 (M7, M8)
7/16
1/2 (M12)
3/8 (M10)
NOTES: • COOLANT TAP COLLETS SEALS COOLANT
PRESSURE UP TO 1,000 PSI
• ADDITIONAL METRIC SIZES AVAILABLE UPON
REQUEST
www.eri-america.com 877.374.8005 847.550.9710
ER20 COOLANT COLLETS - INCH
Part
numberCollet sizeClamping range
ERS20-0125
ERC20-0156
ERC20-0171
ERC20-0187
ERC20-0203
ERC20-0218
ERC20-0234
ERC20-0250
ERC20-0281
ERC20-0312
ERC20-0343
ERC20-0375
ERC20-0406
ERC20-0437
ERC20-0468
ERC20-0500
1/8”
5/32”
11/64”
3/16”
13/64”
7/32”
15/64”
1/4”
9/32”
5/16”
11/32”
3/8”
13/32”
7/16”
15/32”
1/2”
.125”
.152 - .156”
.167 - .171”
.183 - .187”
.199 - .203”
.214 - .218”
.230 - .234”
.231 - .250”
.262 - .281”
.293 - .312”
.324 - .343”
.355 - .375”
.386 - .406”
.418 - .437”
.449 - .468”
.481 - .500”
ER20 COOLANT COLLETS - METRIC
Part
numberCollet sizeClamping range
ERS20-0157
ERC20-0196
ERC20-0216
ERC20-0236
ERC20-0255
ERC20-0275
ERC20-0295
ERC20-0315
ERC20-0334
ERC20-0354
ERC20-0374
ERC20-0393
ERC20-0413
ERC20-0433
ERC20-0452
ERC20-0472
ERC20-0492
ERC20-0511
NOTES: • SEALS COOLANT PRESSURE UP TO 1,000 PSI
• ERS COLLETS ARE RUBBER SEALED AND DO NOT
COLLAPSE.
• COLLETS SHOULD BE USED WITH CYLINDRICAL SHANK TOOLS (NO FLATS)
• SHANKS SHOULD BE FULLY INSERTED TO AVOID LEAKAGE.
4.0
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
.157”
.192 - .196”
.212 - .216”
.217 - .236”
.236 - .255”
.255 - .275”
.275 - .295”
.295 - .315”
.315 - .334”
.334 - .354”
.354 - .374”
.374 - .393”
.394 - .413”
.414 - .433”
.433 - .452”
.453 - .472”
.473 - .492”
.492 - .511”
61
Linking Productivity and Precision
ER25 COLLETS - INCH
Part
ER25-0062
ER25-0093
ER25-0125
ER25-0156
ER25-0187
ER25-0218
ER25-0250
ER25-0281
ER25-0312
ER25-0343
ER25-0375
ER25-0406
ER25-0437
ER25-0468
ER25-0500
ER25-0531
ER25-0562
ER25-0593
ER25-0625
ER25 COLLETS - METRIC
numberCollet sizeClamping range
1/16”
3/32”
1/8”
5/32”
3/16”
7/32”
1/4”
9/32”
5/16”
11/32”
3/8”
13/32”
7/16”
15/32”
1/2”
17/32”
9/16”
19/32”
5/8”
.042 - .062”
.073 - .093”
.086 - .125”
.117 - .156”
.148 - .187”
.179 - .218”
.211 - .250”
.242 - .281”
.273 - .312”
.304 - .343”
.336 - .375”
.367 - .406”
.398 - .437”
.429 - .468”
.461 - .500”
.492 - .531”
.523 - .562”
.554 - .593”
.586 - .625”
Part
ER25-0039
ER25-0078
ER25-0118
ER25-0157
ER25-0196
ER25-0236
ER25-0275
ER25-0315
ER25-0354
ER25-0393
ER25-0433
ER25-0472
ER25-0511
ER25-0551
ER25-0590
ER25-0630
62
number
ERT25-141
ERT25-168
ERT25-194
ERT25-220
ERT25-255
ERT25-318
ERT25-323
ERT25-367
ERT25-381
ERT25-429
ERT25-437
ERT25-480
øD
.141”
.168”
.194”
.220”
.255”
.318”
.323”
.367”
.381”
.429”
.437”
.480”
.020 - .039”
.059 - .078”
.078 - .118”
.118 - .157”
.157 - .196”
.196 - .236”
.236 - .275”
.275 - .315”
.315 - .354”
.354 - .393”
.393 - .433”
.433 - .472”
.472 - .511”
.511 - .551”
.551 - .590”
.590 - .630”
ER25 COOLANT TAP COLLETS
Sq. Tap Size
.110”
.131”
.152”
.165”
.191”
.238”
.242”
.275”
.286”
.322”
.328”
.360”
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
NOTES: • HIGH PRECISION COLLETS ARE AVAILABLE UPON
REQUEST (ADD H.P. TO PART NUMBER)
ER25 TAP COLLETS
Part
numberCollet sizeClamping range
0 - #6 (M3)
#8, 5/32 (M4)
#10, 3/16 (M5)
#12, 7/32
#14, 1/4 (M6)
5/16 (M7, M8)
7/16
1/2 (M12)
3/8 (M10)
9/16 (M14)
1/8LS
5/8 (M16)
Part
number
ERTS25-255
ERTC25-318
ERTC25-323
ERTC25-367
ERTC25-381
ERTC25-429
ERTS25-437
ERTC25-480
øD
.255”
.318”
.323”
.367”
.381”
.429”
.437”
.480”
Sq. Tap Size
.191”
.238”
.242”
.275”
.286”
.322”
.328”
.360”
#14, 1/4 (M6)
5/16 (M7, M8)
7/16
1/2 (M12)
3/8 (M10)
9/16 (M14)
1/8LS
5/8 (M16)
NOTES: • COOLANT TAP COLLETS SEALS COOLANT PRESSURE UP
TO 1,000 PSI
• ADDITIONAL METRIC SIZES AVAILABLE UPON REQUEST
• ERTS COLLETS ARE RUBBER SEALED.
www.eri-america.com 877.374.8005 847.550.9710
ER25 COOLANT COLLETS - INCH
Part
numberCollet sizeClamping range
ERC25-0250
ERC25-0281
ERC25-0312
ERC25-0343
ERC25-0375
ERC25-0406
ERC25-0437
ERC25-0468
ERC25-0500
ERC25-0531
ERC25-0562
ERC25-0593
ERC25-0625
1/4”
9/32”
5/16”
11/32”
3/8”
13/32”
7/16”
15/32”
1/2”
17/32”
9/16”
19/32”
5/8”
.231 - .250”
.262 - .281”
.293 - .312”
.324 - .343”
.356 - .375”
.387 - .406”
.418 - .437”
.449 - .468”
.481 - .500”
.512 - .531”
.543 - .562”
.574 - .593”
.606 - .625”
NOTES: • COLLETS SHOULD BE USED WITH CYLINDRICAL
SHANK TOOLS (NO FLATS)
• SHANKS SHOULD BE FULLY INSERTED TO AVOID
LEAKAGE.
• SEALS COOLANT PRESSURE UP TO 1,000 PSI
ER25 COOLANT COLLETS - METRIC
Part
numberCollet sizeClamping range
ERC25-0236
ERC25-0255
ERC25-0275
ERC25-0295
ERC25-0315
ERC25-0334
ERC25-0354
ERC25-0374
ERC25-0393
ERC25-0413
ERC25-0433
ERC25-0452
ERC25-0472
ERC25-0492
ERC25-0511
ERC25-0532
ERC25-0551
ERC25-0570
ERC25-0590
ERC25-0610
ERC25-0630
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
.217 - .236”
.236 - .255”
.255 - .275”
.275 - .295”
.295 - .315”
.315 - .334”
.334 - .354”
.354 - .374”
.374 - .393”
.393 - .413”
.413 - .433”
.433 - .452”
.452 - .472”
.472 - .492”
.492 - .511”
.511 - .532”
.532 - .551”
.551 - .570”
.570 - .590”
.590 - .610”
.610 - .630”
ER25 COLLET SETS
ER25-S009
ER25-S015
ER25-S017
ERC25-S013
ERC25-S021
9 pc. ER25 Collet Set (1/8 - 5/8”x 16ths)
15 pc. ER25 Collet Set (2.0 - 16.0mm x 1mm)
17 pc. ER25 Collet Set (1/8 - 5/8” x 32nds)
13 pc. ER25 Coolant Collet Set (1/4 - 5/8” x 32nds)
21 pc. ER25 Coolant Collet Set (6.0 - 16.0mm x .5mm)
63
Linking Productivity and Precision
ER32 COLLETS - INCH
Part
ER32-0093
ER32-0125
ER32-0156
ER32-0187
ER32-0218
ER32-0250
ER32-0281
ER32-0312
ER32-0343
ER32-0375
ER32-0406
ER32-0437
ER32-0468
ER32-0500
ER32-0531
ER32-0562
ER32-0593
ER32-0625
ER32-0656
ER32-0687
ER32-0718
ER32-0750
ER32 COLLETS - METRIC
numberCollet sizeClamping range
3/32”
1/8”
5/32”
3/16”
7/32”
1/4”
9/32”
5/16”
11/32”
3/8”
13/32”
7/16”
15/32”
1/2”
17/32”
9/16”
19/32”
5/8”
21/32”
11/16”
23/32”
3/4”
.073 - .093”
.086 - .125”
.117 - .156”
.148 - .187”
.179 - .218”
.211 - .250”
.242 - .281”
.273 - .312”
.304 - .343”
.336 - .375”
.367 - .406”
.398 - .437”
.429 - .468”
.461 - .500”
.492 - .531”
.523 - .562”
.554 - .593”
.586 - .625”
.617 - .656”
.648 - .687”
.679 - .718”
.711 - .750”
Part
numberCollet sizeClamping range
ER32-0078
ER32-0118
ER32-0157
ER32-0196
ER32-0236
ER32-0275
ER32-0315
ER32-0354
ER32-0393
ER32-0433
ER32-0472
ER32-0511
ER32-0551
ER32-0590
ER32-0630
ER32-0669
ER32-0708
ER32-0748
ER32-0787
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
.059 - .078”
.078 - .118”
.118 - .157”
.157 - .196”
.196 - .236”
.236 - .275”
.275 - .315”
.315 - .354”
.354 - .393”
.393 - .433”
.433 - .472”
.472 - .511”
.511 - .551”
.551 - .590”
.590 - .630”
.630 - .669”
.669 - .708”
.708 - .748”
.748 - .787”
NOTES: • HIGH PRECISION COLLETS ARE AVAILABLE UPON
REQUEST (ADD H.P. TO PART NUMBER)
ER32 STANDARD COLLET SETS
ER32-S009
ER32-S018
ER32-S021
9 pc. ER32 Collet Set (1/4 - 3/4”x 16ths)
18 pc. ER32 Collet Set (3.0 - 20.0mm x 1mm)
21 pc. ER32 Collet Set (1/8 - 3/4” x 32nds)
ER32 TAP COLLETS
Part
64
number
ERT32-141
ERT32-168
ERT32-194
ERT32-220
øD
.141”
.168”
.194”
.220”
ER32 COOLANT TAP COLLETS
Sq. Tap Size
.110”
.131”
.152”
.165”
0 - #6 (M3)
#8, 5/32 (M4)
#10, 3/16 (M5)
#12, 7/32
Part
number
ERTC32-255
ERTC32-318
ERTC32-323
ERTC32-367
øD
.255”
.318”
.323”
.367”
www.eri-america.com 877.374.8005 847.550.9710
Sq. Tap Size
.191”
.238”
.242”
.275”
#14, 1/4 (M6)
5/16 (M7, M8)
7/16”
1/2 (M12)
ER32 TAP COLLETS (Cont’d)
Part
number
ERT32-255
ERT32-318
ERT32-323
ERT32-367
ERT32-381
ERT32-429
ERT32-437
ERT32-480
ERT32-542
ERT32-562
ERT32-590
ERT32-652
øD
.255”
.318”
.323”
.367”
.381”
.429”
.437”
.480”
.542”
.562”
.590”
.652”
Sq. Tap Size
.191”
.238”
.242”
.275”
.286”
.322”
.328”
.360”
.406”
.421”
.440”
.489”
#14, 1/4 (M6)
5/16 (M7, M8)
7/16”
1/2 (M12)
3/8 (M10)
9/16 (M14)
1/8LS
5/8 (M16)
11/16 (M18)
1/4 NPT
3/4
13/16 (M20)
ER32 COOLANT TAP COLLETS (Cont’d)
Part
ERTC32-381
ERTC32-429
ERTS32-437
ERTC32-480
ERTC32-542
ERTS32-562
ERTC32-590
ERTC32-652
Part
ERC32-0250
ERC32-0281
ERC32-0312
ERC32-0343
ERC32-0375
ERC32-0406
ERC32-0437
ERC32-0468
ERC32-0500
ERC32-0531
ERC32-0562
ERC32-0593
ERC32-0625
ERC32-0656
ERC32-0687
ERC32-0718
ERC32-0750
numberCollet sizeClamping range
1/4”
9/32”
5/16”
11/32”
3/8”
13/32”
7/16”
15/32”
1/2”
17/32”
9/16”
19/32”
5/8”
21/32”
11/16”
23/32”
3/4”
.231 - .250”
.262 - .281”
.293 - .312”
.324 - .343”
.356 - .375”
.387 - .406”
.418 - .437”
.449 - .468”
.481 - .500”
.512 - .531”
.543 - .562”
.574 - .593”
.606 - .625”
.637 - .656”
.668 - .687”
.699 - .718”
.731 - .750”
NOTES: • COLLETS SHOULD BE USED WITH CYLINDRICAL
SHANK TOOLS (NO FLATS).
• SHANKS SHOULD BE FULLY INSERTED TO AVOID
LEAKAGE.
• SEALS COOLANT PRESSURE UP TO 1,000 PSI
• ERS COLLETS ARE RUBBER SEALED AND DO NOT
COLLAPSE.
øD
.381”
.429”
.437”
.480”
.542”
.562”
.590”
.652”
Sq. Tap Size
.286”
.322”
.328”
.360”
.406”
.421”
.440”
.489”
3/8 (M10)
9/16 (M14)
1/8LS
5/8 (M16)
11/16 (M18)
1/4 NPT
3/4
13/16 (M20)
NOTES: • COOLANT TAP COLLETS SEALS COOLANT PRESSURE UP
TO 1,000 PSI
• ADDITIONAL METRIC SIZES AVAILABLE UPON REQUEST
• ERTS COLLETS ARE RUBBER SEALED.
ER32 COOLANT COLLETS - INCH
number
ER32 COOLANT COLLETS - METRIC
Part
numberCollet sizeClamping range
ERS32-0236
ERS32-0275
ERS32-0315
ERS32-0354
ERC32-0393
ERC32-0413
ERC32-0433
ERC32-0452
ERC32-0472
ERC32-0492
ERC32-0511
ERC32-0532
ERC32-0551
ERC32-0570
ERC32-0590
ERC32-0610
ERC32-0630
ERC32-0649
ERC32-0669
ERC32-0688
ERC32-0708
ERC32-0728
ERC32-0748
ERC32-0767
ERC32-0787
6.0
7.0
8.0
9.0
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
18.0
18.5
19.0
19.5
20.0
.236”
.275”
.315”
.354”
.374 - .393”
.393 - .413”
.413 - .433”
.433 - .452”
.452 - .472”
.472 - .492”
.492 - .511”
.511 - .532”
.532 - .551”
.551 - .570”
.570 - .590”
.590 - .610”
.610 - .630”
.630 - .649”
.649 - .669”
.669 - .688”
.688 - .708”
.708 - .728”
.728 - .748”
.748 - .767”
.767 - .787”
ER32 COOLANT COLLET SETS
ERC32-S017
ERC32-S025
17 pc. ER32 Coolant Collet Set (1/4 - 3/4”x 32nds)
25 pc. ER32 Coolant Collet Set (3.0 - 20.0mm x 1mm)
65
Linking Productivity and Precision
ER40 COLLETS - INCH
Part
ER40-0125
ER40-0156
ER40-0187
ER40-0218
ER40-0250
ER40-0281
ER40-0312
ER40-0343
ER40-0375
ER40-0406
ER40-0437
ER40-0468
ER40-0500
ER40-0531
ER40-0562
ER40-0593
ER40-0625
ER40-0656
ER40-0687
ER40-0718
ER40-0750
ER40-0781
ER40-0812
ER40-0843
ER40-0875
ER40-0906
ER40-0937
ER40-0968
ER40-1000
ER40 COLLETS - METRIC
numberCollet sizeClamping range
1/8”
5/32”
3/16”
7/32”
1/4”
9/32”
5/16”
11/32”
3/8”
13/32”
7/16”
15/32”
1/2”
17/32”
9/16”
19/32”
5/8”
21/32”
11/16”
23/32”
3/4”
25/32”
13/16”
27/32”
7/8”
29/32”
15/16”
31/32”
1”
.086 - .125”
.117 - .156”
.148 - .187”
.179 - .218”
.211 - .250”
.242 - .281”
.273 - .312”
.304 - .343”
.336 - .375”
.367 - .406”
.398 - .437”
.429 - .468”
.461 - .500”
.492 - .531”
.523 - .562”
.554 - .593”
.586 - .625”
.617 - .656”
.648 - .687”
.679 - .718”
.711 - .750”
.742 - .781”
.773 - .812”
.804 - .843”
.836 - .875”
.867 - .906”
.898 - .937”
.929 - .968”
.961 - 1.00”
ER40 TAP COLLETS
Part
number
ERT40-255
ERT40-318
66
øD
.255”
.318”
Part
numberCollet sizeClamping range
ER40-0157
ER40-0196
ER40-0236
ER40-0275
ER40-0315
ER40-0354
ER40-0393
ER40-0433
ER40-0472
ER40-0511
ER40-0551
ER40-0590
ER40-0630
ER40-0669
ER40-0708
ER40-0748
ER40-0787
ER40-0826
ER40-0866
ER40-0905
ER40-0944
ER40-0984
ER40-1023
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
23.0
24.0
25.0
26.0
.118 - .157”
.157 - .196”
.196 - .236”
.236 - .275”
.275 - .315”
.315 - .354”
.354 - .393”
.393 - .433”
.433 - .472”
.472 - .511”
.511 - .551”
.551 - .590”
.590 - .630”
.630 - .669”
.669 - .708”
.708 - .748”
.748 - .787”
.787 - .826”
.826 - .866”
.866 - .905”
.905 - .944”
.944 - .984”
.984 - 1.023”
NOTES: • HIGH PRECISION COLLETS ARE AVAILABLE UPON
REQUEST (ADD H.P. TO PART NUMBER)
ER40 COOLANT TAP COLLETS
Sq. Tap Size
.191”
.238”
#14, 1/4 (M6)
5/16 (M7, M8)
Part
number
ERTC40-323
ERTC40-367
øD
.323”
.367”
www.eri-america.com 877.374.8005 847.550.9710
Sq. Tap Size
.242”
.275”
7/16”
1/2 (M12)
ER40 TAP COLLETS (Cont’d)
Part
number
ERT40-323
ERT40-367
ERT40-381
ERT40-429
ERT40-437
ERT40-480
ERT40-542
ERT40-562
ERT40-590
ERT40-652
ERT40-687
ERT40-697
ERT40-700
ERT40-760
ERT40-800
øD
.323”
.367”
.381”
.429”
.437”
.480”
.542”
.562”
.590”
.652”
.687”
.697”
.700”
.760”
.800”
ER40 COOLANT TAP COLLETS (Cont’d)
Sq. Tap Size
.242”
.275”
.286”
.322”
.328”
.360”
.406”
.421”
.440”
.489”
.515”
.523”
.531”
.570”
.600”
7/16”
1/2 (M12)
3/8 (M10)
9/16 (M14)
1/8LS
5/8 (M16)
11/16 (M18)
1/4 NPT
3/4
13/16 (M20)
1/2 NPT
7/8 (M22)
3/8 NPT
15/16 (M24)
1”
Part
number
ERTC40-381
ERTC40-429
ERTS40-437
ERTC40-480
ERTC40-542
ERTS40-562
ERTC40-590
ERTC40-652
ERTS40-687
ERTC40-697
ERTS40-700
ERTC40-760
ERTC40-800
øD
.381”
.429”
.437”
.480”
.542”
.562”
.590”
.652”
.687”
.697”
.700”
.760”
.800”
Sq. Tap Size
.286”
.322”
.328”
.360”
.406”
.421”
.440”
.489”
.515”
.523”
.531”
.570”
.600”
3/8 (M10)
9/16 (M14)
1/8LS
5/8 (M16)
11/16 (M18)
1/4 NPT
3/4
13/16 (M20)
1/2 NPT
7/8 (M22)
3/8 NPT
15/16 (M24)
1”
NOTES: • COOLANT TAP COLLETS SEALS COOLANT PRESSURE
UP TO 1,000 PSI
• ADDITIONAL METRIC SIZES AVAILABLE UPON REQUEST
• ERTS COLLETS ARE RUBBER SEALED.
ER40 COLLET SETS
ER40-S015
ER40-S023
ER40-S029
ERC40-S033
15 pc. ER40 Collet Set (1/8 - 1”x 16ths)
23 pc. ER40 Collet Set (4.0 - 26.0mm x 1mm)
29 pc. ER40 Collet Set (1/8 - 1” x 32nds)
33 pc. ER40 Coolant Collet Set (10.0 - 26.0 x .5mm)
ER40 COOLANT COLLETS - METRIC
Part
numberCollet sizeClamping range
ERC40-0393
ERC40-0413
ERC40-0433
ERC40-0452
ERC40-0472
ERC40-0492
ERC40-0511
ERC40-0532
ERC40-0551
ERC40-0570
ERC40-0590
ERC40-0610
ERC40-0630
ERC40-0649
ERC40-0669
ERC40-0688
ERC40-0708
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
18.0
.374 - .393”
.393 - .413”
.413 - .433”
.433 - .452”
.452 - .472”
.472 - .492”
.492 - .511”
.511 - .532”
.532 - .551”
.551 - .570”
.570 - .590”
.590 - .610”
.610 - .630”
.630 - .649”
.649 - .669”
.669 - .688”
.688 - .708”
Part
numberCollet sizeClamping range
ERC40-0728
ERC40-0748
ERC40-0767
ERC40-0787
ERC40-0807
ERC40-0826
ERC40-0846
ERC40-0866
ERC40-0885
ERC40-0905
ERC40-0925
ERC40-0944
ERC40-0964
ERC40-0984
ERC40-1003
ERC40-1023
18.5
19.0
19.5
20.0
20.5
21.0
21.5
22.0
22.5
23.0
23.5
24.0
24.5
25.0
25.5
26.0
.709 - .728”
.728 - .748”
.748 - .767”
.767 - .787”
.787 - .807”
.807 - .826”
.826 - .846”
.846 - .866”
.866 - .885”
.885 - .905”
.905 - .925”
.925 - .944”
.944 - .964”
.964 - .984”
.984 - 1.003”
1.003 - 1.023”
NOTES: • COLLETS SHOULD BE USED WITH CYLINDRICAL SHANK TOOLS (NO FLATS)
• SHANKS SHOULD BE FULLY INSERTED TO AVOID LEAKAGE.
• SEALS COOLANT PRESSURE UP TO 1,000 PSI
67
Linking Productivity and Precision
ER11 RACKS & KITS
Part
numberCollet seriesCollet
ER11-RACK
ER11-KIT RACK
ER11-KIT-S
ER11-KIT-M
ER11
ER11
ER11
ER11
Capacity
14
14
14
14
Description
ER11 Collet Rack
ER11 Collet and Extension Kit Only
ER11 Kit Rack, ER11-S007, SS0500-ERM11-6.00
ER11 Kit Rack, ER11-S013, SS0500-ERM11-6.00
ER16 RACKS & KITS
Part
numberCollet seriesCollet
ER16-RACK
ER16-KIT RACK
ER16-KIT-S
ER16-KIT-M
ER16
ER16
ER16
ER16
Capacity
15
14
14
14
Description
ER16 Collet Rack
ER16 Collet and Extension Kit Only
ER16 Kit Rack, ER16-S012, SS0750-ERM16-6.00
ER16 Kit Rack, ER16-S009, SS0750-ERM16-6.00
ER20 RACKS & KITS
68
Part
numberCollet seriesCollet
ER20-RACK
ER20-KIT RACK
ER20-KIT-S
ER20-KIT-M
ER20
ER20
ER20
ER20
Capacity
15
14
14
14
Description
ER20 Collet Rack
ER20 Collet and Extension Kit Only
ER20 Kit Rack, ER20-S013, SS0750-ERM20-6.00
ER20 Kit Rack, ER20-S012, SS0750-ERM20-6.00
www.eri-america.com 877.374.8005 847.550.9710
ER25 RACKS & KITS
Part
numberCollet seriesCollet
ER25-RACK
ER25-KIT RACK
ER25-KIT-S
ER25-KIT-M
ER25
ER25
ER25
ER25
Capacity
21
21
21
21
Description
ER25 Collet Rack
ER25 Collet and Extension Kit Only
ER25 Kit Rack, ER25-S017, SS1000-ERM25-6.00
ER25 Kit Rack, ER25-S015, SS1000-ERM25-6.00
ER32 RACKS & KITS
Part
numberCollet seriesCollet
ER32-RACK
ER32-KIT RACK
ER32-KIT-S
ER32-KIT-M
ER32
ER32
ER32
ER32
Capacity
21
21
21
21
Description
ER32 Collet Rack
ER32 Collet and Extension Kit Only
ER32 Kit Rack, ER32-S021, SS1250-ER32-4.00
ER32 Kit Rack, ER32-S018, SS1250-ER32-4.00
Part
numberCollet seriesCollet
ER40-RACK
ER40
Capacity
24
ER40 COLLET RACK
69
Linking Productivity and Precision
ER MINI NUTS & WRENCHES
Part
numberCollet series
ERM11-NUT
ERM16-NUT
ERM20-NUT
ERM25-NUT
ERM11-WRENCH
ERM16-WRENCH
ERM20-WRENCH
ERM25-WRENCH
ER11
ER16
ER20
ER25
ER11
ER16
ER20
ER25
Nut øD
Description
.63”
.87”
1.10”
1.38”
-
-
-
-
ER11 Mini Nut
ER16 Mini Nut
ER20 Mini Nut
ER25 Mini Nut
ER11 Mini Nut Wrench
ER16 Mini Nut Wrench
ER20 Mini Nut Wrench
ER25 Mini Nut Wrench
NOTE: • ER MINI NUTS CAN ONLY BE USED ON ER MINI CHUCKS.
ER STANDARD NUTS & WRENCHES
70
Part
numberCollet series
ER11-HNUT
ER16-HNUT
ER16-RNUT
ER20-HNUT
ER20-RNUT
ER25-RNUT
ER32-RNUT
ER40-RNUT
ER11-WRENCH
ER16-WRENCH
ER16-SPAN
ER20-WRENCH
ER20-SPAN
ER25-SPAN
ER32-SPAN
ER40-SPAN
ER11
ER16
ER16
ER20
ER20
ER25
ER32
ER40
ER11
ER16
ER16
ER20
ER20
ER25
ER32
ER40
Nut øD
Description
.75”
1.10”
1.26”
1.34”
1.38”
1.65”
1.97”
2.48”
-
-
-
-
-
-
-
-
ER11 Hex Nut
ER16 Hex Nut
ER16 Round Nut
ER20 Hex Nut
ER20 Round Nut
ER25 Round Nut
ER32 Round Nut
ER40 Round Nut
ER11 Hex Wrench
ER16 Hex Wrench
ER16 Spanner Wrench (for round nuts)
ER20 Hex Wrench
ER20 Spanner Wrench (for round nuts)
ER25 Spanner Wrench (for round nuts)
ER32 Spanner Wrench (for round nuts)
ER40 Spanner Wrench (for round nuts)
www.eri-america.com 877.374.8005 847.550.9710
ER BALL BEARING NUTS & WRENCHES
Part
numberCollet series
ER16-BBNUT
ER20-BBNUT
ER25-BBNUT
ER32-BBNUT
ER40-BBNUT
ER16-SPAN
ER20-SPAN
ER25-SPAN
ER32-SPAN
ER40-SPAN
ER16
ER20
ER25
ER32
ER40
ER16
ER20
ER25
ER32
ER40
Nut øD
Description
1.25”
1.42”
1.69”
2.01”
2.48”
-
-
-
-
-
ER16 Ball Bearing Nut
ER20 Ball Bearing Nut
ER25 Ball Bearing Nut
ER32 Ball Bearing Nut
ER40 Ball Bearing Nut
ER16 Spanner Wrench
ER20 Spanner Wrench
ER25 Spanner Wrench
ER32 Spanner Wrench
ER40 Spanner Wrench
Part
numberCollet series
ER11-SCREW
ER16-SCREW
ER20-SCREW
ER25-SCREW
ER32-SCREW
ER40-SCREW
ER11
ER16
ER20
ER25
ER32
ER40
Description
ER11 Adjustment Screw
ER16 Adjustment Screw
ER20 Adjustment Screw
ER25 Adjustment Screw
ER32 Adjustment Screw
ER40 Adjustment Screw
ER ADJUSTMENT SCREWS
71
Linking Productivity and Precision
CV40 & CV50 TG COLLET CHUCKS
ØDLL1
Part NumberTaperCollet CapacityCollet Series
CV40-75TG-3.00
CV40-100TG-3.00
CV40-100TG-4.00
CV40-100TG-5.50
CV50-75TG-3.00
CV50-100TG-3.50
CV50-100TG-5.50
CV50-100TG-7.50
CV50-100TG-10.00
CV40
CV40
CV40
CV40
CV50
CV50
CV50
CV50
CV50
.047 - .750” (3/64 - 3/4”)
.047 - 1.00” (3/64 - 1”)
.047 - 1.00” (3/64 - 1”)
.047 - 1.00” (3/64 - 1”)
.047 - .750” (3/64 - 3/4”)
.047 - 1.00” (3/64 - 1”)
.047 - 1.00” (3/64 - 1”)
.047 - 1.00” (3/64 - 1”)
.047 - 1.00” (3/64 - 1”)
75TG
100TG
100TG
100TG
75TG
100TG
100TG
100TG
100TG
2.09”
2.44”
2.44”
2.44”
2.09”
2.44”
2.44”
2.44”
2.44”
3.00”
3.00”
4.00”
5.50”
3.00”
3.50”
5.50”
7.50”
10.00”
2.28”
2.95”
2.95”
2.95”
2.28”
2.95”
2.95”
2.95”
2.95”
NOTES: • ALL TG COLLET CHUCKS INCLUDE HEX NUTS. ROUND NUTS ARE AVAILABLE UPON REQUEST.
• ALL COLLET CHUCKS ARE PROVIDED WITH COLLET NUTS AND ADJUSTMENT SCREWS
• COLLET CHUCKS ARE PRE-BALANCED TO G2.5 @ 20,000RPM.
• FORM B COOLANT THROUGH THE FLANGE IS AVAILABLE UPON REQUEST.
• TG COLLETS ARE LISTED ON PAGES 73 - 76.
BT40 TG COLLET CHUCKS
Part NumberTaperCollet CapacityCollet Series
BT40-75TG-3.00
BT40-100TG-3.50
BT40-100TG-5.50
BT40
BT40
BT40
.047 - .750” (3/64 - 3/4”)
.047 - 1.00” (3/64 - 1”)
.047 - 1.00” (3/64 - 1”)
75TG
100TG
100TG
ØDLL1
2.09”
2.44”
2.44”
3.00”
3.50”
5.50”
2.28”
2.95”
2.95”
NOTES: • ALL TG COLLET CHUCKS INCLUDE HEX NUTS. ROUND NUTS ARE AVAILABLE UPON REQUEST.
• ALL COLLET CHUCKS ARE PROVIDED WITH COLLET NUTS AND ADJUSTMENT SCREWS
• COLLET CHUCKS ARE PRE-BALANCED TO G2.5 @ 20,000RPM.
• FORM B COOLANT THROUGH THE FLANGE IS AVAILABLE UPON REQUEST.
• IMPROPER TIGHTENING TORQUE ON COLLET NUT MAY ALSO AFFECT COLLET ACCURACY. SEE PAGE 77 FOR
PROPER TIGHTENING TORQUE LEVELS.
• TG COLLETS ARE LISTED ON PAGES 73 - 76.
72
www.eri-america.com 877.374.8005 847.550.9710
75TG COLLETS - INCH
Part
numberCollet sizeClamping range
75TG-0062
75TG-0078
75TG-0093
75TG-0109
75TG-0125
75TG-0140
75TG-0156
75TG-0171
75TG-0187
75TG-0203
75TG-0218
75TG-0234
75TG-0250
75TG-0265
75TG-0281
75TG-0296
75TG-0312
75TG-0328
75TG-0343
75TG-0359
75TG-0375
75TG-0390
75TG-0406
1/16”
5/64”
3/32”
7/64”
1/8”
9/64”
5/32”
11/64”
3/16”
13/64”
7/32”
15/64”
1/4”
17/64”
9/32”
19/64”
5/16”
21/64”
11/32”
23/64”
3/8”
25/64”
13/32”
.047 - .062”
.062 - .078”
.078 - .093”
.093 - .109”
.109 - .125”
.125 - .141”
.141 - .156”
.156 - .171”
.171 - .187”
.187 - .203”
.203 - .218”
.218 - .234”
.234 - .250”
.250 - .265”
.265 - .281”
.281 - .296”
.296 - .312”
.312 - .328”
.328 - .343”
.343 - .359”
.359 - .375”
.375 - .390”
.390 - .406”
Part
numberCollet sizeClamping range
75TG-0421
75TG-0437
75TG-0453
75TG-0468
75TG-0484
75TG-0500
75TG-0515
75TG-0531
75TG-0546
75TG-0562
75TG-0578
75TG-0593
75TG-0609
75TG-0625
75TG-0640
75TG-0656
75TG-0671
75TG-0687
75TG-0703
75TG-0718
75TG-0734
75TG-0750
27/64”
7/16”
29/64”
15/32”
31/64”
1/2”
33/64”
17/32”
35/64”
9/16”
37/64”
19/32”
39/64”
5/8”
41/64”
21/32”
43/64”
11/16”
45/64”
23/32”
47/64”
3/4”
.406 - .421”
.421 - .437”
.437 - .453”
.453 - .468”
.468 - .484”
.484 - .500”
.500 - .515”
.515 - .531”
.531 - .546”
.546 - .562”
.562 - .578”
.578 - .593”
.593 - .609”
.609 - .625”
.625 - .640”
.640 - .656”
.656 - .671”
.671 - .687”
.687 - .703”
.703 - .718”
.718 - .734”
.734 - .750”
NOTES: • COLLETS ARE PRODUCED TO DIN 6499 CLASS 2 ACCURACY.
• HIGH PRECISION COLLETS ARE AVAILABLE UPON REQUEST (ADD H.P. TO PART NUMBER)
• CUTTING TOOL SHANK MUST BE INSERTED THE FULL LENGTH OF THE COLLET BORE TO ACHIEVE MAXIMUM GRIP
AND ACCURACY.
• COLLET ACCURACY IS BASED ON NOMINAL SIZED CONDITIONS. COLLAPSE MAY AFFECT GRIP AND ACCURACY.
• IMPROPER TIGHTENING TORQUE ON COLLET NUT MAY ALSO AFFECT COLLET ACCURACY. SEE PAGE 77 FOR
PROPER TIGHTENING TORQUE LEVELS.
75TG COLLET SETS
75TG-S012
75TG-S023
75TG-S045
12 pc. 75TG Collet Set (1/16 - 3/4” x 16ths)
23 pc. 75TG Collet Set (1/16 - 3/4” x 32nds)
45 pc. 75TG Collet Set (1/16 - 3/4” x 64ths)
73
Linking Productivity and Precision
100TG COLLETS - INCH
Part
numberCollet sizeClamping range
100TG-0062
100TG-0078
100TG-0093
100TG-0109
100TG-0125
100TG-0140
100TG-0156
100TG-0171
100TG-0187
100TG-0203
100TG-0218
100TG-0234
100TG-0250
100TG-0265
100TG-0281
100TG-0296
100TG-0312
100TG-0328
100TG-0343
100TG-0359
100TG-0375
100TG-0390
100TG-0406
100TG-0421
100TG-0437
100TG-0453
100TG-0468
100TG-0484
100TG-0500
100TG-0515
100TG-0531
1/16”
5/64”
3/32”
7/64”
1/8”
9/64”
5/32”
11/64”
3/16”
13/64”
7/32”
15/64”
1/4”
17/64”
9/32”
19/64”
5/16”
21/64”
11/32”
23/64”
3/8”
25/64”
13/32”
27/64”
7/16”
29/64”
15/32”
31/64”
1/2”
33/64”
17/32”
.047 - .062”
.063 - .078”
.078 - .093”
.094 - .109”
.109 - .125”
.125 - .141”
.141 - .156”
.156 - .171”
.171 - .187”
.187 - .203”
.203 - .218”
.218 - .234”
.234 - .250”
.250 - .265”
.265 - .281”
.281 - .296”
.296 - .312”
.312 - .328”
.328 - .343”
.343 - .359”
.359 - .375”
.375 - .390”
.390 - .406”
.406 - .421”
.421 - .437”
.437 - .453”
.453 - .468”
.468 - .484”
.484 - .500”
.500 - .515”
.515 - .531”
Part
numberCollet sizeClamping range
100TG-0546
100TG-0562
100TG-0578
100TG-0593
100TG-0609
100TG-0625
100TG-0640
100TG-0656
100TG-0671
100TG-0687
100TG-0703
100TG-0718
100TG-0734
100TG-0750
100TG-0765
100TG-0781
100TG-0796
100TG-0812
100TG-0828
100TG-0843
100TG-0859
100TG-0875
100TG-0890
100TG-0906
100TG-0921
100TG-0937
100TG-0953
100TG-0968
100TG-0984
100TG-1000
35/64”
9/16”
37/64”
19/32”
39/64”
5/8”
41/64”
21/32”
43/64”
11/16”
45/64”
23/32”
47/64”
3/4”
49/64”
25/32”
51/64”
13/16”
53/64”
27/32”
55/64”
7/8”
57/64”
29/32”
59/64”
15/16”
61/64”
31/32”
63/64”
1”
.531 - .546”
.546 - .562”
.562 - .578”
.578 - .593”
.593 - .609”
.609 - .625”
.625 - .640”
.640 - .656”
.656 - .671”
.671 - .687”
.687 - .703”
.703 - .718”
.718 - .734”
.734 - .750”
.750 - .765”
.765 - .781”
.781 - .796”
.796 - .812”
.812 - .828”
.828 - .843”
.843 - .859”
.859 - .875”
.875 - .890”
.890 - .906”
.906 - .921”
.921 - .937”
.937 - .953”
.953 - .968”
.968 - .984”
.984 - 1.00”
NOTES: • COLLETS ARE PRODUCED TO DIN 6499 CLASS 2 ACCURACY.
• HIGH PRECISION COLLETS ARE AVAILABLE UPON REQUEST (ADD H.P. TO PART NUMBER)
• CUTTING TOOL SHANK MUST BE INSERTED THE FULL LENGTH OF THE COLLET BORE TO ACHIEVE MAXIMUM GRIP
AND ACCURACY.
• COLLET ACCURACY IS BASED ON NOMINAL SIZED CONDITIONS. COLLAPSE MAY AFFECT GRIP AND ACCURACY.
• IMPROPER TIGHTENING TORQUE ON COLLET NUT MAY ALSO AFFECT COLLET ACCURACY. SEE PAGE 78 FOR
PROPER TIGHTENING TORQUE LEVELS.
74
www.eri-america.com 877.374.8005 847.550.9710
100TG SEALED COLLETS - INCH
Part
numberCollet sizeClamping range
100STG-0156
100STG-0171
100STG-0187
100STG-0203
100STG-0218
100STG-0234
100STG-0250
100STG-0265
100STG-0281
100STG-0296
100STG-0312
100STG-0328
100STG-0343
100STG-0359
100STG-0375
100STG-0390
100STG-0406
100STG-0421
100STG-0437
100STG-0453
100STG-0468
100STG-0484
100STG-0500
100STG-0515
100STG-0531
100STG-0546
100STG-0562
100STG-0578
5/32”
11/64”
3/16”
13/64”
7/32”
15/64”
1/4”
17/64”
9/32”
19/64”
5/16”
21/64”
11/32”
23/64”
3/8”
25/64”
13/32”
27/64”
7/16”
29/64”
15/32”
31/64”
1/2”
33/64”
17/32”
35/64”
9/16”
37/64”
.156”
.171”
.187”
.203”
.218”
.234”
.250”
.265”
.281”
.296”
.312”
.328”
.343”
.359”
.375”
.390”
.406”
.421”
.437”
.453”
.468”
.484”
.500”
.515”
.531”
.546”
.562”
.578”
Part
numberCollet sizeClamping range
100STG-0593
100STG-0609
100STG-0625
100STG-0640
100STG-0656
100STG-0671
100STG-0687
100STG-0703
100STG-0718
100STG-0734
100STG-0750
100STG-0765
100STG-0781
100STG-0796
100STG-0812
100STG-0828
100STG-0843
100STG-0859
100STG-0875
100STG-0890
100STG-0906
100STG-0921
100STG-0937
100STG-0953
100STG-0968
100STG-0984
100STG-1000
19/32”
39/64”
5/8”
41/64”
21/32”
43/64”
11/16”
45/64”
23/32”
47/64”
3/4”
49/64”
25/32”
51/64”
13/16”
53/64”
27/32”
55/64”
7/8”
57/64”
29/32”
59/64”
15/16”
61/64”
31/32”
63/64”
1”
.593”
.609”
.625”
.640”
.656”
.671”
.687”
.703”
.718”
.734”
.750”
.765”
.781”
.796”
.812”
.828”
.843”
.859”
.875”
.890”
.906”
.921”
.937”
.953”
.968”
.984”
1.00”
NOTES: • COLLETS SHOULD BE USED WITH CYLINDRICAL SHANK TOOLS (NO FLATS) AND SHANKS SHOULD BE FULLY
INSERTED TO AVOID LEAKAGE. • SEALS COOLANT PRESSURE UP TO 1,000 PSI
• STG COLLETS ARE RUBBER SEALED AND DO NOT COLLAPSE.
100TG STANDARD COLLET SETS
100TG-S008
100TG-S015
100TG-S021
100TG-S030
100TG-S041
100TG-S059
8 pc. 100TG Collet Set (1/8 - 1” x 8ths)
15 pc. 100TG Collet Set (1/8 - 1” x 16ths)
21 pc. 100TG Collet Set (3/8 - 1” x 32nds)
30 pc. 100TG Collet Set (3/32 - 1” x 32nds)
41 pc. 100TG Collet Set (3/8 - 1” x 64ths)
59 pc. 100TG Collet Set (3/32 - 1” x 64ths)
75
Linking Productivity and Precision
100TG COLLETS - METRIC
Part
numberCollet sizeClamping range
100TG-3MM
100TG-4MM
100TG-6MM
100TG-8MM
100TG-10MM
100TG-12MM
100TG-14MM
3.0
4.0
6.0
8.0
10.0
12.0
14.0
.102 - .118”
.141 - .157”
.220 - .236”
.298 - .314”
.377 - .393”
.456 - .472”
.535 - .551”
Part
numberCollet sizeClamping range
100TG-16MM
100TG-18MM
100TG-20MM
100TG-22MM
100TG-24MM
100TG-25MM
100TG-26MM
16.0
18.0
20.0
22.0
24.0
25.0
26.0
.614 - .630”
.692 - .708”
.771 - .787”
.850 - .866”
.929 - .945”
.968 - .984”
1.008 - 1.024”
100TG NON-PULL COLLETS
Part
numberCollet sizeClamping range
100NTG-0375
100NTG-0500
100NTG-0625
3/8”
1/2”
5/8”
.375”
.500”
.625”
Part
numberCollet sizeClamping range
100NTG-0750
100NTG-0875
100NTG-1000
3/4”
7/8”
1”
.750”
.875”
1.00”
NOTES: • NON-PULL COLLETS ARE INTENDED FOR USE WITH CUTTING TOOL SHANKS WITH A FLAT.
• THEY ELIMINATE THE OFFSET CONDITION CREATED BY ENDMILL HOLDERS YET HOLD MORE FIRMLY THAN A
STANDARD ER OR TG COLLET.
Part
numberCollet seriesCollet
75TG-RACK
75TG
30
100TG-RACK
100TG
30
TG COLLET RACKS
76
Capacity
www.eri-america.com 877.374.8005 847.550.9710
Part
numberCollet series
Description
75TG-SCREW
75TG
Adjustment Screw
100TG-SCREW
100TG
Adjustment Screw
TG ADJUSTMENT SCREWS
TG NUTS & WRENCHES
Part
numberCollet series
75TG-HNUT
75TG-RNUT
100TG-HNUT
100TG-RNUT
75TG-WRENCH
75TG-SPAN
100TG-WRENCH
100TG-SPAN
75TG
75TG
100TG
100TG
75TG
75TG
100TG
100TG
Nut øD
Description
2.09”
1.97”
2.44”
2.48”
-
-
-
-
75TG Hex Nut
75TG Round Nut
100TG Hex Nut
100TG Round Nut
75TG Hex Wrench
75TG Spanner Wrench (for round nuts)
100TG Hex Wrench
100TG Spanner Wrench (for round nuts)
TG COLLET CHUCK TIGHTENING TORQUES
Nut Part NumberCollet SeriesCollet Nut ØMax. Tightening Torque
75TG-HNUT
75TG-RNUT
100TG-HNUT
100TG-RNUT
75TG
75TG
100TG
100TG
2.09”
1.97”
2.44”
2.48”
100 ft. lbs.
100 ft. lbs.
150 ft. lbs.
150 ft. lbs.
NOTES: • IMPROPER TIGHTENING TORQUE ON COLLET NUT MAY AFFECT COLLET ACCURACY.
• EXCESSIVE TIGHTENING TORQUE WILL DAMAGE THE COLLET CHUCK, COLLET NUT AND/OR COLLET.
77
Linking Productivity and Precision
NOTES
78
www.eri-america.com 877.374.8005 847.550.9710
RADIAL COMPENSATION TOOLHOLDER FEATURES
80-81
CV40 & CV50 RCT ER COLLET CHUCK ASSEMBLIES 82
BT40 RCT ER COLLET CHUCK ASSEMBLIES
82
HSK RCT ER COLLET CHUCK ASSEMBLIES
83
CV40 & CV50 RCT SHRINK FIT ASSEMBLIES 84
BT40 RCT SHRINK FIT ASSEMBLIES 85
HSK RCT SHRINK FIT ASSEMBLIES
86-87
CV40 & CV50 RCT BASES
88
BT40 RCT BASES
88
HSK RCT BASES
88
RCT ER COLLET CHUCK ADAPTERS
89
RCT SHRINK FIT ADAPTERS
89
Reamers courtesy of Voisard Tool
www.voisardtool.com
79