Catalogue 2013

Transcription

Catalogue 2013

NORMA Australia
Catalogue 2013
PHONE 1300 CLAMPS
www.normapacific.com
Contents
5NORMACLAMP® wdhc
NORMACLAMP® kits
81rg ray®
6
NORMACLAMP WDHC Torro W1
Hose Clamps
34NORMACLAMP Merchandisers
and Kits
82 RG RAY® Heavy Duty T-Bolt & Flex
Seal™ Hose Clamps
8
NORMACLAMP® WDHC Torro W2
Stainless Steel Band Hose Clamps
42Normaclamp® Tools Assorted
84 RG RAY® Heavy Duty
V-Clamps - General Purpose
10NORMACLAMP® WDHC Torro W3
All Stainless Steel Hose Clamps
45ABA®
85 RG RAY® Quick Connect V-Insert
Clamp
®
®
All Stainless Steel Hose Clamps
47ABA® Nova - Aluzink
48ABA® Original Aluzink
87normafix®
Stainless Steel Hose Clamps
49ABA® Original Stainless Steel
50ABA® Merchandisers
89
NORMAFIX® RLGU Pipe Retaining
Clip W1 (Trade Packs)
NORMACLAMP® specialties
53BREEZE
90
NORMAFIX® RSGU Pipe Retaining
W1 Bandwidth 15mm
16NORMACLAMP® Constant Tension
WDHC with Spring Insert
54BREEZE® Mini Series W2
17NORMAclamp® sl Fuel Clips
18NORMAclamp Assorted
sl Fuel Clips Kits
®
®
55BREEZE Power-Seal 62 Series W2
®
57BREEZE® Mini Series W4
58BREEZE® Power-Seal 63 Series W4
19NORMACLAMP® Constant Tension
Springband
NORMACLAMP® Constant Tension
HD
60BREEZE® Merchandisers & Kits
BREEZE® BHC108/W4
BREEZE® BHC108/W2
20NORMACLAMP® Heavy Duty
High Torque Clamps
63BREEZE® Make-A-Clamp
62BREEZE® Aero Seal®
64BREEZE® Hi-Torque
Clamp With Liner
NORMACLAMP COBRA
66BREEZE Constant-Torque
22NORMACLAMP® - Cobra®
Stainless Steel Irrigation Clamps
67BREEZE® V-Band Clamps
All Stainless Steel
23NORMACLAMP® - Cobra® Hose
Clips
68BREEZE® T-Bolt Clamps
®
24NORMACLAMP® Cobra® Kits & Tools
NORMACLAMP® T-BOLT
25NORMACLAMP® GBSM (Bolt)
Heavy Duty Clamp
26NORMACLAMP® GBSM (Bolt) W1
2
®
®
70BREEZE® T-Bolt Clamps Spring
Loaded Heavy Duty
91
NORMAFIX® Pipe Retaining Clip
W1 Bandwidth 20mm
92
NORMAFIX® RSGU Pipe Retaining
Clip W5 316 Stainless Steel
NORMAFIX® Pipe Retaining Clip
W1 10mm Mounting Hole
93
NORMAFIX® Pipe Retaining Kits
RSGU90 and RSGU85
95
NORMAFIX® Heavy Duty Pipe
Retaining Clips W1 Vinyl Coated
Galvanised 19mm
96
Retaining Clips W1 Heavy duty
Rubber Lined Galvanised 19mm
97
Retaining Clips W1 Heavy Duty
Vinyl coated Galvanised 25mm
NORMAFIX® FIXING CLIPS
73 torca®
98
NORMAFIX® Fixing Clips
NORMAFIX® Type 510
74Torca® Torctite™
Exhaust Products
99
NORMAFIX® Type 512
76Torca® Easyseal™
Exhaust Products
77Torca® Unistrap™
Exhaust Products
32NORMACLAMP® GBSM (Bolt)
Extreme Clamp Merchandisers
78Torca® Accuseal™
Exhaust Products
33Conversion and References Chart
79Torca® Coupler™
Exhaust Products
NORMAFIX® ADDITIONS
100NORMAFIX® Flex-O-Metre
101NORMAFIX® K1Bracket
NORMAFIX® CABLE TIES
127 oetiker® EAR CLAMPS
167 Additional Information
102NORMAFIX Industrial Cable Ties
Standard - NYLON PA 6.6
128OETIKER® EAR CLAMPS
1 and 2-Ear Clamps
Mild Steel Zinc Plated
Stainless Steel
Ear Clamp Tools
170Manufacturer’s Reference
®
103NORMAFIX® Industrial Cable Tie
Tools & Accessories.
104NORMAFIX® Industrial Cable Tie
Floor Stand NCT 980
105NORMAFIX® ELEFIX® Pipe and
Cable fixing systems
106 NORMAFIX Stainless Steel
Cable Ties
®
TERRY® TOOL CLIPS
108Terry® Tool Clips
111 BANDIMEX®
112 Bandimex®
Plain Banding,
Buckles,
Scru Buckles,
Jumbo Band,
Jumbo Buckles,
Free End Clamps,
Quick Release Buckles,
Worm Drive Seal Plain Banding,
Mounting Brackets,
Tools,
Tool Spares
Normetta® Worm Drive Banding
Buckles
Bandimex® Preformed Clamps
117 NORMAPLAST® PUSH ON
118NORMAPLAST® SV Plastic
Push On Hose Connectors
Straight and T connectors
Push On Hose Connectors:
90º connector, Y connector,
Cross connector
NORMAPLAST® THREADED
Threaded Hose Connectors:
GES connector, BST connector,
TES connector, WES connector
171Material Grades
172General Terms and Conditions of
Sale
132EAR CLAMPS Assortment kits
133 TST® COUPLERS
134TST® COUPLERS
TST® Swing Couplings with male and female thread,
PUR compression fitting,
Adaptor with male thread,
Adaptor with female thread,
Adaptor with hose stem
139 NORMACONNECT®
PIPE COUPLINGS
140NORMACONNECT® Pipe Coupling
142NORMACONNECT® MATERIALS
144NORMACONNECT®
FLEX E Pipe Coupling W5
145NORMACONNECT®
GRIP E Pipe Coupling W5
146NORMACONNECT®
GRIP E FP W5
147NORMACONNECT® RFP
retrofitable FLAME
PROTECTion
148NORMACONNECT® COMBI
149NORMACONNECT® plast
150NORMACONNECT® REP
E Pipe Coupling W5
153 NORMACONNECT® DCS
154NORMACONNECT® DCS
159 RAPID® REPAIR COUPLINGS
160Rapid® Repair Couplings
124NORMAPLAST® Plastic Connector
Kits NPC90 and NPC180
3
normaclamp®
Made in germany
5
W1
NORMACLAMP® WDHC - Torro W1 (Packed)
Torro® Worm Drive Hose Clamps
W1 Material Grade: Band: Alu Zinc - Screw & Housing: Mild Steel Zinc Plated & Clear Chromate.
6
Band
Width
Clamping
Range
Part No.
W1 Clamps
Item No.
Pack
Qty
Carton
Qty
9.0
8-12mm
8-12/9W1P
0126 5001 010
10
10
9.0
10-16mm
10-16/9W1P
0126 5001 013
10
10
9.0
12-22mm
12-22/9W1P
0126 5002 017
10
10
12.0
16-27mm
16-27/12W1P
0136 5001 021
10
10
12.0
20-32mm
20-32/12W1P
0136 5001 026
10
10
12.0
25-40mm
25-40/12W1P
0136 5001 032
10
10
12.0
30-45mm
30-45/12W1P
0136 5001 037
10
10
12.0
35-50mm
35-50/12W1P
0136 5001 043
10
10
12.0
40-60mm
40-60/12W1P
0136 5000 050
10
5
12.0
50-70mm
50-70/12W1P
0136 5000 060
10
5
12.0
60-80mm
60-80/12W1P
0136 5000 070
10
12.0
70-90mm
70-90/12W1P
0136 5000 080
10
12.0
80-100mm
80-100/12W1P
0136 5000 090
10
12.0
90-110mm
90-110/12W1P
0136 5000 100
10
12.0
100-120mm
100-120/12W1P
0136 5000 110
5
12.0
110-130mm
110-130/12W1P
0136 5000 120
5
12.0
120-140mm
120-140/12W1P
0136 5000 130
5
12.0
130-150mm
130-150/12W1P
0136 5000 140
5
12.0
140-160mm
140-160/12W1P
0136 5000 150
5
12.0
150-170mm
150-170/12W1P
0136 5000 160
5
12.0
160-180mm
160-180/12W1P
0136 5000 170
5
12.0
170-190mm
170-190/12W1P
0136 5000 180
5
12.0
180-200mm
180-200/12W1P
0136 5000 190
5
12.0
190-210mm
190-210/12W1P
0136 5000 200
5
12.0
200-220mm
200-220/12W1P
0136 5000 210
5
12.0
210-230mm
210-230/12W1P
0136 5000 220
5
12.0
230-250mm
230-250/12W1P
0136 5000 240
5
12.0
260-280mm
260-280/12W1P
0136 5000 270
5
12.0
280-300mm
280-300/12W1P
0136 5000 290
5
NORMACLAMP® WDHC - Torro W1 (Trade Pack)
W1
W1 Material Grade: Band: Alu Zinc - Screw & Housing: Mild Steel Zinc Plated & Clear Chromate.
Band
Width
9.0
9.0
9.0
9.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
Clamping
Range
8-12mm
10-16mm
12-18mm
12-22mm
16-27mm
20-32mm
25-40mm
30-45mm
35-50mm
40-60mm
50-70mm
60-80mm
70-90mm
80-100mm
90-110mm
100-120mm
110-130mm
120-140mm
130-150mm
140-160mm
150-170mm
160-180mm
170-190mm
180-200mm
190-210mm
200-220mm
210-230mm
230-250mm
260-280mm
280-300mm
Part No.
8-12/9W1-100
10-16/9W1-100
12-18/9W1-100
12-22/9W1-100
16-27/12W1-100
20-32/12W1-100
25-40/12W1-100
30-45/12W1-100
35-50/12W1-100
40-60/12W1
50-70/12W1
60-80/12W1
70-90/12W1
80-100/12W1
90-110/12W1
100-120/12W1
110-130/12W1
120-140/12W1
130-150/12W1
140-160/12W1
150-170/12W1
160-180/12W1
170-190/12W1
180-200/12W1
190-210/12W1
200-220/12W1
210-230/12W1
230-250/12W1
260-280/12W1
280-300/12W1
W1 Clamps
Item No.
0126 5000 010
0126 5000 013
0126 5000 015
0126 5000 017
0136 5000 021
0136 5000 026
0136 5000 032
0136 5000 037
0136 5000 043
0136 7352 050
0136 7352 060
0136 7352 070
0136 7352 080
0136 6352 090
0136 6352 100
0136 6352 110
0136 6352 120
0136 6352 130
0136 6352 140
0136 6352 150
0136 6352 160
0136 6352 170
0136 6352 180
0136 6352 190
0136 6352 200
0136 6352 210
0136 6352 220
0136 6352 240
0136 6352 270
0136 6352 290
Carton
Qty
100
100
100
100
100
100
100
100
100
25
25
25
25
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
50
50
NORMACLAMP® WDHC with Thumb Plate
Choose the hose clamp material grade, bandwidth and size you require. Add to
this the thumb plate cost . Minimum order 100 pieces - produced to order only
Band
Width
Clamping
Range
Part No.
Item No.
Carton
Qty
9.0 or 12
8-300mm
Thumb
Plates only
1045 8001 007
100
7
W2
W2 Material Grade: Band & Housing: Stainless Steel (1.4016/AISI 430) - Screw: Mild Steel Zinc
Plated & Clear Chromate.
NORMACLAMP® WDHC W2 - Stainless Steel Band (Packed)
Band
Width
Clamping
Range
Part No.
W2 Clamps
Item No.
Pack
Qty
Carton
QTY
7.5
7.5
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
8-12mm
10-16mm
8-12mm
8-16mm
12-20mm
16-25mm
20-32mm
25-40mm
30-45mm
32-50mm
40-60mm
50-70mm
60-80mm
70-90mm
80-100mm
90-110mm
8-12/7.5W2P
10-16/7.5W2P
8-12/9W2P (N2)
8-16/9W2P ( N4 )
12-20/9W2P ( N6 )
16-25/9W2P ( N10 )
20-32/9W2P ( N12 )
25-40/9W2P ( N16 )
30-45/9W2P ( N20 )
32-50/9W2P ( N24 )
40-60/9W2P (N28/32)
50-70/9W2P ( N36 )
60-80/9W2P ( N40 )
70-90/9W2P ( N48 )
80-100/9W2P ( N56 )
90-110/9W2P ( N60 )
0116 5000 010
0116 5000 013
0126 5014 010
0126 5006 013
0126 5003 016
0126 5000 020
0126 5001 026
0126 5001 032
0126 5001 037
0126 5001 041
0126 5002 050
0126 5002 060
0126 5001 070
0126 5002 080
0126 5001 090
0126 5001 100
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
5
5
NORMACLAMP® WDHC W2 Clam Shell packed
Band
Width
Clamping
Range
Part No.
W2 Clamps
Item No.
7.5
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
10-16mm
8-16mm
12-20mm
16-25mm
20-32mm
25-40mm
30-45mm
32-50mm
40-60mm
50-70mm
70-90mm
B10-16/7.5
B8-16/9
B12-20/9
B16-25/9
B20-32/9
B25-40/9
B30-45/9
B32-50/9
B40-60/9
B50-70/9
B70-90/9
0116 5002 013
0126 5014 013
0126 5011 016
0126 5004 020
0126 5005 026
0126 5005 032
0126 5005 037
0126 5006 041
0126 5005 050
0126 5011 060
0126 5011 080
C/Shells Clamps
Per
Per
Pack
Shell
10
2
10
2
10
2
10
2
10
2
10
2
10
2
10
2
10
2
10
2
10
2
NORMACLAMP® WDHC W2 Assortment: NHC20W2 0825 0300 029
Band
Width
7.5
9
9
9
8
Part No.
10-16/7.5
8-16/9
12-20/9
16-25/9
Pack
Qty
2
4
4
2
Band
Width
9
9
9
9
Part No.
20-32/9
25-40/9
30-45/9
32-50/9
Pack
Qty
2
2
2
2
W2
W2 Material Grade: Band & Housing: Stainless Steel (1.4016/AISI 430) - Screw: Mild Steel Zinc
Plated & Clear Chromate.
Band
Width
Clamping
Range
Part No.
W2 Clamps
Item No.
Carton
Qty
5.0
7-11mm
SGL 7-11/5
0124 7565 009
100
5.0
11-19mm
SGL 11-19/5
0124 7565 015
100
7.5
8-12mm
8-12/7.5W2-100
0116 7624 010
100
7.5
10-16mm
10-16/7.5W2-100
0116 7624 013
100
9.0
8-16mm
8-16/9W2-100
0126 7702 013
100
9.0
12-20mm
12-20/9W2-100
0126 7702 016
100
9.0
16-25mm
16-25/9W2-100
0126 7702 020
100
9.0
20-32mm
20-32/9W2-100
0126 7702 026
100
9.0
25-40mm
25-40/9W2
0126 7702 032
100
9.0
30-45mm
30-45/9W2
0126 7702 037
100
9.0
32-50mm
32-50/9W2
0126 5000 041
100
9.0
40-60mm
40-60/9W2
0126 6702 050
250
9.0
50-70mm
50-70/9W2
0126 6702 060
250
9.0
60-80mm
60-80/9W2
0126 6702 070
250
9.0
70-90mm
70-90/9W2
0126 6702 080
250
9.0
80-100mm
80-100/9W2
0126 6702 090
200
9.0
90-110mm
90-110/9W2
0126 6702 100
200
Choose the hose clamp material grade, bandwidth and size you require Add to
Band
Clamping
Carton
Part No.
Item No.
Width
Range
Qty
Thumb Plates
9 or 12
8-300mm
1045 8001 007
100
only
9
W3 MATERIAL: Band, Screw & Housing: Stainless Steel throughout (1.4016/AISI 430).
Band
Width
7.5
7.5
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
10
Clamping
Range
8-12mm
10-16mm
8-16mm
12-20mm
16-25mm
20-32mm
25-40mm
30-45mm
32-50mm
40-60mm
50-70mm
60-80mm
70-90mm
80-100mm
90-110mm
16-27mm
20-32mm
25-40mm
30-45mm
35-50mm
40-60mm
50-70mm
60-80mm
70-90mm
80-100mm
90-110mm
100-120mm
110-130mm
120-140mm
130-150mm
140-160mm
150-170mm
160-180mm
180-200mm
210-230mm
230-250mm
260-280mm
280-300mm
Part No.
8-12/7.5W3P
10-16/7.5W3P
8-16/9W3P
12-20/9W3P
16-25/9W3P
20-32/9W3P
25-40/9W3P
30-45/9W3P
32-50/9W3P
40-60/9W3P
50-70/9W3P
60-80/9W3P
70-90/9W3P
80-100/9W3P
90-110/9W3P
16-27/12W3P
20-32/12W3P
25-40/12W3P
30-45/12W3P
35-50/12W3P
40-60/12W3P
50-70/12W3P
60-80/12W3P
70-90/12W3P
80-100/12W3P
90-110/12W3P
100-120/12W3P
110-130/12W3P
120-140/12W3P
130-150/12W3P
140-160/12W3P
150-170/12W3P
160-180/12W3P
180-200/12W3P
210-230/12W3P
230-250/12W3P
260-280/12W3P
280-300/12W3P
W3 Clamps
Item No.
0116 5001 010
0116 5001 013
0126 5007 013
0126 5004 016
0126 5001 020
0126 5002 026
0126 5002 032
0126 5002 037
0126 5003 041
0126 5003 050
0126 5003 060
0126 5002 070
0126 5003 080
0126 5002 090
0126 5002 100
0136 5019 021
0136 5007 026
0136 5007 032
0136 5007 037
0136 5012 043
0136 5004 050
0136 5004 060
0136 5004 070
0136 5004 080
0136 5004 090
0136 5004 100
0136 5004 110
0136 5004 120
0136 5004 130
0136 5004 140
0136 5004 150
0136 5003 160
0136 5003 170
0136 5003 190
0136 5003 220
0136 5003 240
0136 5003 270
0136 5003 290
Pack
QTY
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
5
5
5
5
5
5
5
5
5
5
5
5
Carton
QTY
10
10
10
10
10
10
10
10
10
5
5
10
10
10
10
10
5
5
W3
W3
W3 MATERIAL: Band, Screw & Housing: Stainless Steel throughout (1.4016/AISI 430).
Band
Width
7.5
7.5
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
Clamping
Range
8-12mm
10-16mm
8-16mm
12-20mm
16-25mm
20-32mm
25-40mm
30-45mm
32-50mm
40-60mm
50-70mm
60-80mm
70-90mm
80-100mm
90-110mm
16-27mm
20-32mm
25-40mm
30-45mm
35-50mm
40-60mm
50-70mm
60-80mm
70-90mm
80-100mm
90-110mm
100-120mm
110-130mm
120-140mm
130-150mm
140-160mm
150-170mm
160-180mm
180-200mm
210-230mm
230-250mm
260-280mm
280-300mm
Part No.
8-12/7.5W3
10-16/7.5W3
8-16/9W3-100
12-20/9W3-100
16-25/9W3-100
20-32/9W3-100
25-40/9W3-100
30-45/9W3-100
32-50/9W3-100
40-60/9W3
50-70/9W3
60-80/9W3
70-90/9W3
80-100/9W3
90-110/9W3
16-27/12W3-100
20-32/12W3-100
25-40/12W3-100
30-45/12W3-100
35-50/12W3-100
40-60/12W3
50-70/12W3
60-80/12W3
70-90/12W3
80-100/12W3
90-110/12W3
100-120/12W3
110-130/12W3
120-140/12W3
130-150/12W3
140-160/12W3
150-170/12W3
160-180/12W3
180-200/12W3
210-230/12W3
230-250/12W3
260-280/12W3
280-300/12W3
W3 Clamps
Item No.
0116 7603 010
0116 7603 013
0126 7703 013
0126 7703 016
0126 7703 020
0126 7703 026
0126 7703 032
0126 7703 037
0126 5002 041
0126 6703 050
0126 6703 060
0126 6703 070
0126 6703 080
0126 6703 090
0126 6703 100
0136 5020 021
0136 5006 026
0136 5006 032
0136 5006 037
0136 5013 043
0136 7703 050
0136 7703 060
0136 7703 070
0136 7703 080
0136 6703 090
0136 6703 100
0136 6703 110
0136 6703 120
0136 6703 130
0136 6703 140
0136 6703 150
0136 6703 160
0136 6703 170
0136 6703 190
0136 6703 220
0136 6703 240
0136 6703 270
0136 6703 290
Carton
Qty
100
100
100
100
100
100
100
100
100
250
250
250
250
200
200
100
100
100
100
100
25
25
25
25
100
100
100
100
100
100
100
100
100
50
50
50
50
50
NORMACLAMP® WDHC with Thumb Plate (Per 100)
Choose the hose clamp material grade, bandwidth and size you require Add to
Band
Clamping
Carton
Part No.
Item No.
Width
Range
Qty
Thumb Plates
9 or 12
8-300mm
1045 8001 007
100
only
11
W4
W4 MATERIAL: Band, Screw & Housing: Stainless Steel throughout (1.4301 / AISI 304).
12
Band
Width
Clamping
Range
Part No.
W4 Clamps
Item No.
Pack Qty
Carton
QTY
9.0
8-12mm
8-12/9W4P
0126 5013 010
10
10
9.0
8-16mm
8-16/9W4P
0126 5009 013
10
10
9.0
12-20mm
12-20/9W4P
0126 5006 016
10
10
9.0
12-22mm
12-22/9W4P
0126 5016 017
10
10
9.0
16-25mm
16-25/9W4P
0126 5011 020
10
10
9.0
16-27mm
16-27/9W4P
0126 5019 021
10
10
9.0
20-32mm
20-32/9W4P
0126 5025 026
10
10
12.0
16-27mm
16-27/12W4P
0136 5003 021
10
10
12.0
20-32mm
20-32/12W4P
0136 5010 026
10
10
12.0
25-40mm
25-40/12W4P
0136 5010 032
10
10
12.0
30-45mm
30-45/12W4P
0136 5010 037
10
10
12.0
35-50mm
35-50/12W4P
0136 5014 043
10
10
12.0
40-60mm
40-60/12W4P
0136 5006 050
10
5
12.0
50-70mm
50-70/12W4P
0136 5006 060
10
5
12.0
60-80mm
60-80/12W4P
0136 5006 070
10
12.0
70-90mm
70-90/12W4P
0136 5006 080
10
12.0
80-100mm
80-100/12W4P
0136 5006 090
10
12.0
90-110mm
90-110/12W4P
0136 5006 100
10
12.0 100-120mm
100-120/12W4P
0136 5006 110
5
12.0 110-130mm
110-130/12W4P
0136 5006 120
5
12.0 120-140mm
120-140/12W4P
0136 5006 130
5
12.0 130-150mm
130-150/12W4P
0136 5006 140
5
12.0 140-160mm
140-160/12W4P
0136 5006 150
5
12.0 150-170mm
150-170/12W4P
0136 5005 160
5
12.0 160-180mm
160-180/12W4P
0136 5005 170
5
12.0 200-220mm
200-220/12W4P
0136 5002 210
5
12.0 210-230mm
210-230/12W4P
0136 5006 220
5
12.0 230-250mm
230-250/12W4P
0136 5006 240
5
12.0 260-280mm
260-280/12W4P
12.0 280-300mm
280-300/12W4P
12.0 330-350mm
330-350/12W4P
0136 5000 340
5
W4
W4 MATERIAL: Band, Screw & Housing: Stainless Steel throughout (1.4301 / AISI 304).
Band
Width
9.0
9.0
9.0
9.0
9.0
9.0
9.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
Clamping
Range
8-12mm
8-16mm
12-20mm
12-22mm
16-25mm
16-27mm
20-32mm
16-27mm
20-32mm
25-40mm
30-45mm
35-50mm
40-60mm
50-70mm
60-80mm
70-90mm
80-100mm
90-110mm
100-120mm
110-130mm
120-140mm
130-150mm
140-160mm
150-170mm
160-180mm
170-190mm
180-200mm
190-210mm
200-220mm
210-230mm
230-250mm
260-280mm
280-300mm
330-350mm
Part No.
8-12/9W4-100
8-16/9W4-100
12-20/9W4-100
12-22/9W4-100
16-25/9W4-100
16-27/9W4-100
20-32/9W4-100
16-27/12W4-100
20-32/12W4-100
25-40/12W4-100
30-45/12W4-100
35-50/12W4-100
40-60/12W4
50-70/12W4
60-80/12W4
70-90/12W4
80-100/12W4
90-110/12W4
100-120/12W4
110-130/12W4
120-140/12W4
130-150/12W4
140-160/12W4
150-170/12W4
160-180/12W4
170-190/12W4
180-200/12W4
190-210/12W4
200-220/12W4
210-230/12W4
230-250/12W4
260-280/12W4
280-300/12W4
330-350/12W4
W4 Clamps
Item No.
0126 7704 010
0126 7704 013
0126 7704 016
0126 7704 017
0126 7704 020
0126 7704 021
0126 7704 026
0136 5012 021
0136 5009 026
0136 5009 032
0136 5009 037
0136 5015 043
0136 7704 050
0136 7704 060
0136 7704 070
0136 7704 080
0136 6704 090
0136 6704 100
0136 6704 110
0136 6704 120
0136 6704 130
0136 6704 140
0136 6704 150
0136 6704 160
0136 6704 170
0136 6704 180
0136 6704 190
0136 6704 200
0136 6704 210
0136 6704 220
0136 6704 240
0136 6704 270
0136 6704 290
0136 6704 340
Carton
Qty
100
100
100
100
100
100
100
100
100
100
100
100
25
25
25
25
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
50
50
50
Choose the hose clamp material grade, bandwidth and size you require. Add to this the thumb
plate cost . Minimum order 100 pieces - produced to order only
Band
Clamping
Carton
Part No.
Item No.
Width
Range
Qty
Thumb Plates
9 or 12
8-300mm
1045 8001 007
100
only
13
W5
W5 MATERIAL: Band, Screw & Housing: High Grade Stainless Steel throughout
(1.4401/AISI 316).
14
Band
Width
Clamping
Range
Part No.
W5 Clamps
Item No.
Pack
Qty
Carton
Qty
9.0
8-16mm
8-16/9W5P
0126 5011 013
10
10
9.0
12-20mm
12-20/9W5P
0126 5008 016
10
10
9.0
16-25mm
16-25/9W5P
0126 5003 020
10
10
12.0
16-27mm
16-27/12W5P
0136 5021 021
10
10
12.0
20-32mm
20-32/12W5P
0136 5013 026
10
10
12.0
25-40mm
25-40/12W5P
0136 5013 032
10
10
12.0
30-45mm
30-45/12W5P
0136 5013 037
10
10
12.0
35-50mm
35-50/12W5P
0136 5016 043
10
10
12.0
40-60mm
40-60/12W5P
0136 5008 050
10
5
12.0
50-70mm
50-70/12W5P
0136 5009 060
10
5
12.0
60-80mm
60-80/12W5P
0136 5009 070
10
12.0
70-90mm
70-90/12W5P
0136 5009 080
10
12.0
80-100mm
80-100/12W5P
0136 5009 090
10
12.0
90-110mm
90-110/12W5P
0136 5009 100
10
12.0
100-120mm
100-120/12W5P
0136 5008 110
5
12.0
110-130mm
110-130/12W5P
0136 5009 120
5
12.0
120-140mm
120-140/12W5P
0136 5008 130
5
12.0
130-150mm
130-150/12W5P
0136 5008 140
5
12.0
140-160mm
140-160/12W5P
0136 5009 150
5
12.0
150-170mm
150-170/12W5P
0136 5007 160
5
12.0
160-180mm
160-180/12W5P
0136 5007 170
5
12.0
180-200mm
180-200/12W5P
12.0
210-230mm
210-230/12W5P
12.0
230-250mm
230-250/12W5P
12.0
260-280mm
260-280/12W5P
12.0
280-300mm
280-300/12W5P
W5
W5 MATERIAL: Band, Screw & Housing: High Grade Stainless Steel throughout
(1.4401/AISI 316).
Band
Width
9.0
9.0
9.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
Clamping
Range
8-16mm
12-20mm
16-25mm
16-27mm
20-32mm
25-40mm
30-45mm
35-50mm
40-60mm
50-70mm
60-80mm
70-90mm
80-100mm
90-110mm
100-120mm
110-130mm
120-140mm
130-150mm
140-160mm
150-170mm
160-180mm
180-200mm
210-230mm
230-250mm
260-280mm
280-300mm
Part No.
8-16/9W5-100
12-20/9W5-100
16-25/9W5-100
16-27/12W5
20-32/12W5
25-40/12W5
30-45/12W5
35-50/12W6
40-60/12W5
50-70/12W5
60-80/12W5
70-90/12W5
80-100/12W5
90-110/12W5
100-120/12W5
110-130/12W5
120-140/12W5
130-150/12W5
140-160/12W5
150-170/12W5
160-180/12W5
180-200/12W5
210-230/12W5
230-250/12W5
260-280/12W5
280-300/12W5
W5 Clamps
Item No.
0126 7705 013
0126 7705 016
0126 5002 020
0136 7705 021
0136 7705 026
0136 7705 032
0136 7705 037
0136 7705 043
0136 7705 050
0136 7705 060
0136 7705 070
0136 7705 080
0136 7705 090
0136 7705 100
0136 6705 110
0136 6705 120
0136 6705 130
0136 6705 140
0136 6705 150
0136 6705 160
0136 6705 170
Carton
Qty
100
100
100
50
50
50
50
50
25
25
25
25
25
20
100
100
100
100
100
100
100
0136 6705 270
0136 6705 290
50
50
Choose the hose clamp material grade, bandwidth and size you require
Add to this the thumb plate cost . Minimum order 100 pieces - produced to
order only
Band
Clamping
Carton
Part No.
Item No.
Width
Range
Qty
Thumb Plates
9 or 12
8-300mm
1045 8001 007
100
only
15
NORMACLAMP® WDHC - with Spring Insert
NORMACLAMP® torro® constant tension clamp with spring insert, has been designed to compensate for“Cold Flow Leakage” in new hoses. This design includes a constant tension spring positioned
on the inner side of the band. When the TORRO® is tightened this radially positioned spring, roughly
2mm thick is pre-stressed.
NORMACLAMP® CONSTANT TENSION WDHC W/SPRING - 9 & 12mm Bandwidth PACKS OF 2
Band
Width
9.0
9.0
9.0
9.0
9.0
9.0
9.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
Clamping
Range
12-20mm
16-25mm
20-32mm
25-40mm
30-45mm
32-50mm
40-60mm
16-27mm
25-40mm
30-45mm
35-50mm
40-60mm
50-70mm
60-80mm
70-90mm
Part No.
B12-20/9CT
B16-25/9CT
B20-32/9CT
B25-40/9CT
B30-45/9CT
B32-50/9CT
B40-60/9CT
B16-27/12CT
B25-40/12CT
B30-45/12CT
B35-50/12CT
B40-60/12CT
B50-70/12CT
B60-80/12CT
B70-90/12CT
W3 Clamps
Item No.
0127 5001 017
0127 5001 020
0127 5002 026
0127 5002 032
0127 5002 037
0127 5003 041
0127 5002 050
0137 5001 021
0137 5001 032
0137 5001 037
0137 5001 043
0137 5002 050
0137 5003 060
0137 5003 070
0137 5003 080
Pack
Qty
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
NORMACLAMP® CONSTANT TENSION WDHC W/SPRING - 9 & 12mm Bandwidth PACKS OF 10
Band
Width
9.0
9.0
9.0
9.0
9.0
9.0
9.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
16
Clamping
Range
12-20mm
16-25mm
20-32mm
25-40mm
30-45mm
32-50mm
40-60mm
16-27mm
25-40mm
30-45mm
35-50mm
40-60mm
50-70mm
60-80mm
70-90mm
80-100mm
90-110mm
100-120mm
120-140mm
Part No.
12-20/9CT
16-25/9CT
20-32/9CT
25-40/9CT
30-45/9CT
32-50/9CT
40-60/9CT
16-27/12CT
25-40/12CT
30-45/12CT
35-50/12CT
40-60/12CT
50-70/12CT
60-80/12CT
70-90/12CT
80-100/12CT
90-110/12CT
100-120/12CT
120-140/12CT
W3 Clamps
Item No.
0127 5000 016
0127 5000 020
0127 5000 026
0127 5000 032
0127 5001 037
0127 5000 041
0127 5000 050
0137 5000 021
0137 5000 032
0137 5000 037
0137 5000 043
0137 5001 050
0137 5002 060
0137 5002 070
0137 5002 080
0137 5002 090
0137 5002 100
0137 8051 110
0137 8051 130
Pack
Qty
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
NORMAclamp® sl - fuel clips
NORMACLAMP® SL One Piece Hose Clamps are designed to provide a perfect seal on small
and soft material hoses as used for fuel and emission lines.
Ideal for use on both high and low pressure hose applications. The non-perforated band
eliminates any risk of damage to the hose and all sizes will close to a perfect circle, while the
uniform circumferential pressure obtained ensures maximum sealing efficiency. This one-piece
clamp features a special nut which is retained in the clamp so that it cannot be lost.
Fuel Clips- W1 Mild Steel Zinc Plated
Band
Width
Clamping
Range
Part Number
Item Number
Pack
Quantity
Carton
Quantity
9.0
7-9mm
SL7-9W1P
0120 5003 008
10
100
9.0
9-11mm
SL9-11W1P
0120 5004 010
10
100
9.0
10-12mm
SL10-12W1P 0120 5003 012
10
100
9.0
11-13mm
SL11-13W1P 0120 5000 012
10
100
9.0
12-14mm
SL12-14W1P 0120 5004 014
10
100
9.0
13-15mm
SL13-15W1P 0120 5001 014
10
100
9.0
14-16mm
SL14-16W1P 0120 5001 016
10
100
9.0
15-17mm
SL15-17W1P 0120 5002 016
10
100
Fuel Clips- W4 Stainless Steel (304)
Band
Width
Clamping
Range
Part Number
Item Number
9.0
7.5-8.5mm
Mini 8/9W4
0810 5000 008
10
100
9.0
8.5-9.5mm
Mini 9/9W4
0810 5000 009
10
100
9.0
9.5-11.0mm
Mini 10/9W4
0810 5001 010
10
100
9.0
10.5-12.0mm
Mini 11/9W4
0810 5001 011
10
100
9.0
11.5-13.0mm
Mini 12/9W4
0810 5001 012
10
100
9.0
12.5-14.0mm
Mini 13/9W4
0810 5000 013
10
100
9.0
13.5-15.0mm
Mini 14/9W4
0810 5000 014
10
100
9.0
14.5-16.0mm
Mini 15/9W4
0810 5000 015
10
100
9.0
15.0-17.0mm
Mini 16/9W4
0810 5000 016
10
100
9.0
16.0-18.0mm
Mini 17/9W4
0810 5000 017
10
100
Pack
Carton
Quantity Quantity
17
NORMAclamp® sl - fuel clip kits
Assorted NORMACLAMP® SL One Piece Hose Clamps in a handy kit.
NORMACLAMP® NFC105W1 FUEL LINE CLAMP Assortment Kit
NFC105W1 Item number: 0825 0303 000
Band Width
Part Number
Clamping
Range
Pack Quantity
9.0
SL7-9/9W1
7-9mm
10
9.0
SL9-11/9W1
9-11mm
15
9.0
SL10-12/9W1
10-12mm
15
9.0
SL11-13/9W1
11-13mm
15
9.0
SL12-14/9W1
12-14mm
15
9.0
SL13-15/9W1
13-15mm
15
9.0
SL14-16/9W1
14-16mm
10
9.0
SL15-17/9W1
15-17mm
10
NORMACLAMP® NFC105W4 FUEL LINE CLAMP Assortment Kit
STAINLESS STEEL - All parts AISI 304
NFC105W4 Item number: 0825 0303 001
18
Band Width
Part Number
Clamping
Range
Pack Quantity
9.0
Mini 9/9W4
8.5-9.5mm
10
9.0
Mini 10/9W4
9.5-11.0mm
15
9.0
Mini 11/9W4
10.5-12.0mm
15
9.0
Mini 12/9W4
11.5-13.0mm
15
9.0
Mini 13/9W4
12.5-14.0mm
15
9.0
Mini 14/9W4
13.5-15.0mm
15
9.0
Mini 15/9W4
14.5-16.0mm
10
9.0
Mini 16/9W4
15.0-17.0mm
10
NORMACLAMP® FBS Spring Band (Trade Pack)
NORMACLAMP® FBS Spring Band Clamp is the Ideal fastener for hose connection systems which
are subjected to large temperature fluctuations. The FBS clamp can be assembled very quickly and
easily due to it’s spring properties, it re-tightens automatically after the assembly. ADDITIONAL SIZES
AVAILABLE BY REQUEST. SUBJECT TO QUANTITY REQUIREMENTS.
NORMACLAMP® CONSTANT TENSION SPRINGBAND
Band
Clamping
Clamp
Carton
Part No.
Width
Range
Item No.
Qty
7.9
10.3mm
UM5073
0827 0300 004
100
12.0
13 mm
FBS13/12
0112 6001 013
100
7.9
13.5mm
UM5077
0827 0300 008
100
12.0
14 mm
FBS14/12
0112 6001 014
100
12.0
16 mm
FBS16/12
0112 6001 016
100
12.0
17 mm
FBS17/12
0112 6001 017
100
12.0
19 mm
FBS19/12
0112 6001 019
100
12.0
22 mm
FBS22/12
0112 6001 022
100
12.0
23 mm
FBS23/12
0112 6001 023-1
100
12.0
24 mm
FBS24/12
0112 6001 024-1
100
12.0
26mm
FBS26/12
0112 6001 026-1
100
12.0
27 mm
FBS27/12
0112 6001 027-1
100
12.0
32 mm
FBS32/12
0112 8059 032-1
100
12.0
35 mm
FBS35/12
0112 6001 035-1
100
Springband Clamp Installation Tool - Hand held plier with safety lever
Installation
Tool
798-12
0115 0000 904
1
Additional sizes available on request, subject to order quantity.
NORMACLAMP® heavy duty constant tension
NORMACLAMP® CONSTANT TENSION HEAVY DUTY CLAMPS - Material Grade W2
Band
Width
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
Clamping
Range
55-65
64-74
74-84
88-98
94-104
104-114
112-122
130-140
Part No.
65/20CT
74/20CT
84/20CT
98/20CT
104/20CT
114/20CT
122/20CT
140/20CT
W2 Clamps
Item No.
0564 8112 065
0564 8112 074
0564 8112 084
0564 8112 098
0564 8112 104
0564 8112 114
0564 8112 122
0564 8112 140
Carton
Qty
10
10
10
10
10
10
10
10
Additional sizes available refer to Breeze® section.
19
NORMACLAMP® HD High Torque Clamp (Packed)
W4
NORMACLAMP® HD is a high strength worm drive hose clamp completely made of Stainless
Steel. It is the most powerful hose clamp within the NORMA® product range and is therefore
ideally suited for heavy duty and high pressure applications where high tightening forces and
high contact pressures are essential.
NORMACLAMP® HD high torque - clamshell 2 pack
Band
Width
Clamping
Range
Part No.
Clamp
Item No.
Pack
QTY
Carton
Qty
16.0
HD25-45/16C
25-45mm
0156 5000 035
2
10
16.0
HD32-54/16C
32-54mm
0156 5000 043
2
10
16.0
HD45-67/16C
45-67mm
0156 5000 056
2
10
16.0
HD57-79/16C
57-79mm
0156 5000 068
2
10
16.0
HD70-92/16C
70-92mm
0156 5000 081
2
10
Carton
Qty
NORMACLAMP® HD high torque -bagged 10 pack
20
Band
Width
Clamping
Range
Part No.
Clamp
Item No.
Pack
QTY
16.0
SGS25-45/16W4
25-45mm
0156 5001 035
10
16.0
SGS32-54/16W4
32-54mm
0156 5001 043
10
16.0
SGS45-67/16W4
45-67mm
0156 5001 056
10
16.0
SGS57-79/16W4
57-79mm
0156 5001 068
10
16.0
SGS70-92/16W4
70-92mm
0156 5001 081
10
16.0
SGS83-105/16W4
83-105mm
0156 5001 094
10
16.0
SGS95-118/16W4
95-118mm
0156 5001 106
10
16.0
SGS108-130/16W4
108-130mm
0156 5000 119
10
16.0
SGS121-143/16W4
121-143mm
0156 6804 132
10
100
16.0
SGS133-156/16W4
133-156mm
0156 6804 144
10
100
16.0
SGS146-168/16W4
146-168mm
0156 6804 157
10
100
16.0
SGS159-181/16W4
159-181mm
0156 6804 170
10
50
16.0
SGS172-194/16W4
172-194mm
0156 6804 183
10
50
16.0
SGS184-206/16W4
184-206mm
0156 6804 195
10
50
16.0
SGS197-219/16W4
197-219mm
0156 6804 208
10
50
16.0
SGS210-232/16W4
210-232mm
0156 6804 221
10
50
NORMACLAMP® HD High Torque Clamp (Packed)
W4
NORMACLAMP® HD is a high strength worm drive hose clamp completely made of Stainless
Steel. It is the most powerful hose clamp within the NORMA® product range and is therefore
ideally suited for heavy duty and high pressure applications where high tightening forces and
high contact pressures are essential.
NORMACLAMP® HD high torque - bulk carton
Band
Width
Clamping
Range
Part No.
Clamp
Item No.
Carton
Qty
16.0
SGS25-45/16W4
25-45mm
0156 5042 044
200
16.0
SGS32-54/16W4
32-54mm
0156 5032 051
400
16.0
SGS45-67/16W4
45-67mm
0156 2015 064
300
16.0
SGS57-79/16W4
57-79mm
0156 7000 076
200
16.0
SGS70-92/16W4
70-92mm
01560013 089
200
16.0
SGS83-105/16W4
83-105mm
0156 2025 102
200
16.0
SGS95-118/16W4
95-118mm
0156 6039 114
150
16.0
SGS108-130/16W4
108-130mm
0156 2055 127
125
16.0
SGS121-143/16W4
121-143mm
0156 5068 140
125
16.0
SGS133-156/16W4
133-156mm
0156 1084 152
130
16.0
SGS146-168/16W4
146-168mm
0156 0093 165
100
16.0
SGS159-181/16W4
159-181mm
0156 5090 178
100
16.0
SGS172-194/16W4
172-194mm
0156 6079191
100
16.0
SGS184-206/16W4
184-206mm
0156 9066 203
100
16.0
SGS197-219/16W4
197-219mm
0156 7058 216
75
16.0
SGS210-232/16W4
210-232mm
0156 2043 229
75
NORMACLAMP® Stainless Steel Quick Release- Slotted Band Band
Width
Clamping
Range
Part No.
Clamp
Item No.
Pack
QTY
Carton
Qty
14.0
QR 72
51-130mm
0822 0380 005
10
200
14.0
QR 104
51-176mm
0822 0380 000
10
150
14.0
QR 116 *
51-197mm
0822 0380 001
10
50
14.0
QR 128
60-215mm
0822 0380 002
10
250
14.0
QR 152 *
60-254mm
0822 0380 003
10
250
14.0
QR 188
60-311mm
0822 0380 004
10
250
* Denotes available while current stock lasts. 21
NORMACLAMP® - Cobra® Stainless Steel Irrigation Clamps W4
NORMACLAMP® COBRA® hose clamp is a reliable fastener for hose connection systems. Developed
initially for automobile equipment, it can be used in all fields of industry. In the industrial sector, it
provides as always a secure connection for washing machine hoses, low pressure tubes in irrigation
or pneumatic air lines.
PRODUCT ADVANTAGES
NORMACLAMP® COBRA is a one-piece hose clamp of Stainless Steel (chrome, nickel steel 1.4310)
manufactured in a strip width range of 7, 8 & 9mm. Delivered open, it is positioned onto the hose
connection system and closed using, either hand-held pliers or compressed air pliers.
The very low overall height allows precise assembly even in cramped conditions. The integrated
beading (8 & 9mm strip widths) ensures that the clamp is centred during closing, thus guaranteeing
optimum clip guidance. A single lock-in point guarantees correct assembly which can be easily
checked visually. The tolerance bead of the 8 & 9mm wide Cobra hose clamps compensate for any
tolerances in the outside diameter of the hose.
Cobra® - The Fit & Forget Solution
22
NORMACLAMP® - Cobra® Hose Clips W4
NORMACLAMP® COBRA® hose clamp is a reliable fastener for hose connection systems. Developed
initially for automobile equipment, it can be used in all fields of industry. In the industrial sector, it
provides as always a secure connection for washing machine hoses, low pressure tubes in irrigation or
pneumatic air lines. W4 material stainless Steel throughout (1.4301/AISI304).
Band
Width
7.0
Clamping
Range
8.0-9.0mm
7.0
8.5-9.5mm
7.0
9.0-10.0mm
C7.5/7
W4 Clamps
Item No.
0107 7000 075
Carton
Qty
100
C8/7
0107 7000 008
100
C8.5/7
0107 7000 085
100
Part No.
7.0
9.5-10.5mm
C9/7
0107 7000 009
100
7.0
10.-11.0mm
C9.5/7
0107 7000 095
100
7.0
10.5-11.5mm
C10/7
0107 7000 010
100
7.0
11.0-12.0mm
C10.5/7
0107 7000 105
100
7.0
11.5-12.5mm
C11/7
0107 7000 011
100
8.0
12.0-13.5mm
C11.5/8
0108 7006 115
100
8.0
12.5-14.0mm
C12/8
0108 7006 012
100
8.0
13.5-15.0mm
C13/8
0108 7006 013
100
8.0
14.5-16.0mm
C14/8
0108 7006 014
100
8.0
15.5-17.0mm
C15/8
0108 7006 015
100
8.0
16.5-18.0mm
C16/8
0108 7006 016
100
8.0
17.5-19.0mm
C17/8
0108 7006 017
100
8.0
18.5-20.0mm
C18/8
0108 7006 018
100
8.0
19.5-21.0mm
C19/8
0108 7006 019
100
8.0
20.5-22.0mm
C20/8
0108 7006 020
100
8.0
21.5-23.0mm
C21/8
0108 7006 021
100
8.0
22.5-24.0mm
C22/8
0108 7006 022
100
8.0
23.5-25.0mm
C23/8
0108 7006 023
100
8.0
24.5-26.0mm
C24/8
0108 7006 024
100
8.0
25.5-27.0mm
C25/8
0108 7006 025
100
8.0
26.5-28.0mm
C26/8
0108 7006 026
100
8.0
27.5-29.0mm
C27/8
0108 7006 027
100
8.0
28.5-30.0mm
C28/8
0108 7006 028
100
8.0
29.5-31.0mm
C29/8
0108 7006 029
100
8.0
30.5-32.0mm
C30/8
0108 7006 030
100
9.0
34.0-36.0mm
C34/9
0109 7000 034
100
9.0
36.0-38.0mm
C36/9
0109 7000 036
100
23
NORMACLAMP® - Cobra® Kits & Tools
Cobra® installation tool
Name
Part No.
NORMA Part NO.
QTY
Pro-Tool
CHT1
0110 8420 000
1
Economy Tool
CHT2
0110 8420 004
1
Cobra® Hose Clip Assortment Kit 0825 0302 000
Band Width
mm
24
Contents
Part No.
Clamping
Range
Hose Clip
Qty
7.0
C7.5/7
8.0-9.0mm
20
7.0
C8/7
8.5-9.5mm
20
7.0
C9/7
9.5-10.5mm
20
7.0
C10/7
10.5-11.5mm
20
7.0
C11/7
11.5-12.5mm
20
8.0
C12/8
12.5-14.0mm
20
8.0
C14/8
14.5-16.0mm
20
8.0
C16/8
16.5-18.0mm
20
8.0
C18/8
18.5-20.0mm
20
8.0
C20/8
20.5-22.0mm
20
8.0
C22/8
22.5-24.0mm
20
8.0
C24/8
24.5-26.0mm
20
-
CHT/1
Tool
1
CHT1
CHT2
NORMACLAMP® GBSM Heavy Duty Clamp
NORMACLAMP® GBSM Heavy Duty Bolt Clamps are built for those applications
where a high strength clamp is required.
The Mechanical Lock design delivers
1: Three times higher band tension (Sealability).
2: Two times improved tightening torque.
3: Two times improved failure torque.
The GBSM clamp delivers a firm but gentle grip on tough industrial
hoses such as suction and pressure hose.
MATERIAL GRADES
W1: Band: Alu Zinc - Screw & Housing: Mild Steel Zinc Plated & Clear Chromate.
W2: Band & Housing Stainless Steel (1.4016/Aisi 430) - Screw Mild Steel Zinc Plated Clear Chromate.
W4: Band, Screw & Housing All Stainless (1.4301/Aisi 304).
W5: Band, Screw & Housing All Stainless (1.4401/Aisi 316) Available upon request.
Stronger Band
Loops & bolt with
captive spacer
Bridge
Rolled
edge
Mechanically locked
No welding points
Improved corrosion resistance
25
NORMACLAMP® GBSM W1 Heavy Duty Clamp (Packed)
NORMACLAMP® GBSM Heavy Duty Bolt Clamps are built for those applications where a
high strength clamp is required. The GBSM clamp delivers a firm but gentle grip on tough
industrial hoses such as suction and pressure hose. W1 Material Grade: Aluzinc.
26
Band
Width
18.0
Clamping
Range
17-19mm
GBS 18/18
18.0
19-21mm
GBS 20/18
0591 9181 020
10
18.0
21-23mm
GBS 22/18
0591 9181 022
10
Part No.
W1 Clamps
Item No.
0591 9181 018
Pack
Qty
10
18.0
23-25mm
GBS 24/18
0591 9181 024
10
18.0
25-27mm
GBS 26/18
0591 9181 026
10
18.0
27-29mm
GBS 28/18
0591 9181 028
10
18.0
29-31mm
GBS 30/18
0591 9181 030
10
18.0
31-34mm
GBS 33/18
0591 9181 033
10
18.0
34-37mm
GBS 36/18
0591 9181 036
10
18.0
37-40mm
GBS 39/18
0591 9181 039
10
18.0
40-43mm
GBS 42/18
0591 9181 042
10
20.0
43-47mm
GBS 45/20
0591 9201 045
10
20.0
47-51mm
GBS 49/20
0591 9201 049
10
20.0
51-55mm
GBS 53/20
0591 9201 053
10
20.0
55-59mm
GBS 57/20
0591 9201 057
10
20.0
59-63mm
GBS 61/20
0591 9201 061
10
20.0
63-68mm
GBS 66/20
0591 9201 066
10
25.0
68-73mm
GBS 71/25
0591 9251 071
10
25.0
73-79mm
GBS 76/25
0591 9251 076
10
25.0
79-85mm
GBS 82/25
0591 9251 082
10
25.0
85-91mm
GBS 88/25
0591 9251 088
10
25.0
91-97mm
GBS 94/25
0591 9251 094
10
25.0
97-104mm
GBS 101/25
0591 9251 101
10
25.0
104-112mm
GBS 108/25
0591 9251 108
10
25.0
112-121mm
GBS 117/25
0591 9251 117
10
25.0
121-130mm
GBS 126/25
0591 9251 126
10
30.0
130-140mm
GBS 135/30
0591 5000 135
5
30.0
140-150mm
GBS 145/30
0591 5000 145
5
30.0
150-162mm
GBS 156/30
0591 5001 156
5
30.0
162-174mm
GBS 168/30
0591 5000 168
5
30.0
174-187mm
GBS 181/30
0591 5000 181
5
30.0
187-200mm
GBS 194/30
0591 5001 194
5
30.0
200-213mm
GBS 207/30
0591 5001 207
5
30.0
213-226mm
GBS 220/30
0591 5000 220
5
30.0
226-239mm
GBS 233/30
0591 5000 233
5
30.0
239-252mm
GBS 246/30
0591 5000 246
5
W1
NORMACLAMP® GBSM W1 Heavy Duty Clamp (Trade Packs)
W1
NORMACLAMP® GBSM Heavy Duty Bolt Clamps are built for those applications where a high
strength clamp is required. The GBSM clamp delivers a firm but gentle grip on tough industrial
hoses such as suction and pressure hose. W1 Material Grade: Aluzinc.
Band
Width
18.0
Clamping
Range
17-19mm
GBS 18/18
18.0
19-21mm
GBS 20/18
0591 7181 020
50
18.0
21-23mm
GBS 22/18
0591 7181 022
50
Part No.
W1 Clamps
Item No.
0591 7181 018
Carton
Qty
50
18.0
23-25mm
GBS 24/18
0591 7181 024
50
18.0
25-27mm
GBS 26/18
0591 7181 026
50
18.0
27-29mm
GBS 28/18
0591 7181 028
50
18.0
29-31mm
GBS 30/18
0591 7181 030
50
18.0
31-34mm
GBS 33/18
0591 7181 033
50
18.0
34-37mm
GBS 36/18
0591 7181 036
50
18.0
37-40mm
GBS 39/18
0591 7181 039
50
18.0
40-43mm
GBS 42/18
0591 7181 042
50
20.0
43-47mm
GBS 45/20
0591 7201 045
50
20.0
47-51mm
GBS 49/20
0591 7201 049
50
20.0
51-55mm
GBS 53/20
0591 7201 053
50
20.0
55-59mm
GBS 57/20
0591 7201 057
50
20.0
59-63mm
GBS 61/20
0591 7201 061
50
20.0
63-68mm
GBS 66/20
0591 7201 066
50
25.0
68-73mm
GBS 71/25
0591 7251 071
25
25.0
73-79mm
GBS 76/25
0591 7251 076
25
25.0
79-85mm
GBS 82/25
0591 7251 082
25
25.0
85-91mm
GBS 88/25
0591 7251 088
25
25.0
91-97mm
GBS 94/25
0591 7251 094
25
25.0
97-104mm
GBS 101/25
0591 7251 101
25
25.0
104-112mm
GBS 108/25
0591 7251 108
25
25.0
112-121mm
GBS 117/25
0591 7251 117
25
25.0
121-130mm
GBS 126/25
0591 7251 126
25
30.0
130-140mm
GBS 135/30
0591 7301 135
10
30.0
140-150mm
GBS 145/30
0591 7301 145
10
30.0
150-162mm
GBS 156/30
0591 7301 156
10
30.0
162-174mm
GBS 168/30
0591 7301 168
10
30.0
174-187mm
GBS 181/30
0591 7301 181
10
30.0
187-200mm
GBS 194/30
0591 7301 194
10
30.0
200-213mm
GBS 207/30
0591 7301 207
10
30.0
213-226mm
GBS 220/30
0591 7301 220
10
30.0
226-239mm
GBS 233/30
0591 7301 233
10
30.0
239-252mm
GBS 246/30
0591 7301 246
10
27
W2
hoses such as suction and pressure hose. W2 Material Grade: Band & Bridge: Stainless Steel
(1.4016/AISI 430) - Screw: Mild Steel Zinc Plated & Clear Chromate.
28
Band
Width
18.0
Clamping
Range
17-19mm
GBS 18/18
W2 Clamps
Item No.
0591 9182 018
Pack
Qty
10
18.0
19-21mm
18.0
21-23mm
GBS 20/18
0591 9182 020
10
GBS 22/18
0591 9182 022
18.0
10
23-25mm
GBS 24/18
0591 9182 024
10
18.0
25-27mm
GBS 26/18
0591 9182 026
10
18.0
27-29mm
GBS 28/18
0591 9182 028
10
18.0
29-31mm
GBS 30/18
0591 9182 030
10
18.0
31-34mm
GBS 33/18
0591 9182 033
10
18.0
34-37mm
GBS 36/18
0591 9182 036
10
18.0
37-40mm
GBS 39/18
0591 9182 039
10
18.0
40-43mm
GBS 42/18
0591 9182 042
10
20.0
43-47mm
GBS 45/20
0591 9202 045
10
20.0
47-51mm
GBS 49/20
0591 9202 049
10
20.0
51-55mm
GBS 53/20
0591 9202 053
10
20.0
55-59mm
GBS 57/20
0591 9202 057
10
20.0
59-63mm
GBS 61/20
0591 9202 061
10
20.0
63-68mm
GBS 66/20
0591 9202 066
10
25.0
68-73mm
GBS 71/25
0591 9252 071
10
25.0
73-79mm
GBS 76/25
0591 9252 076
10
25.0
79-85mm
GBS 82/25
0591 9252 082
10
25.0
85-91mm
GBS 88/25
0591 9252 088
10
25.0
91-97mm
GBS 94/25
0591 9252 094
10
25.0
97-104mm
GBS 101/25
0591 9252 101
10
25.0
104-112mm
GBS 108/25
0591 9252 108
10
25.0
112-121mm
GBS 117/25
0591 9252 117
10
25.0
121-130mm
GBS 126/25
0591 9252 126
10
30.0
130-140mm
GBS 135/30
0591 5001 135
5
30.0
140-150mm
GBS 145/30
0591 5001 145
5
30.0
150-162mm
GBS 156/30
0591 5002 156
5
30.0
162-174mm
GBS 168/30
0591 5001 168
5
30.0
174-187mm
GBS 181/30
0591 5001 181
5
30.0
187-200mm
GBS 194/30
0591 5002 194
5
30.0
200-213mm
GBS 207/30
0591 5002 207
5
30.0
213-226mm
GBS 220/30
0591 5001 220
5
30.0
226-239mm
GBS 233/30
0591 5001 233
5
30.0
239-252mm
GBS 246/30
0591 5001 246
5
Part No.
NORMACLAMP® GBSM W2 Heavy Duty Clamp (Trade Pack)
W2
Band
Width
18.0
Clamping
Range
17-19mm
GBS 18/18
18.0
19-21mm
GBS 20/18
0591 7182 020
50
18.0
21-23mm
GBS 22/18
0591 7182 022
50
Part No.
W2 Clamps
Item No.
0591 7182 018
Carton
Qty
50
18.0
23-25mm
GBS 24/18
0591 7182 024
50
18.0
25-27mm
GBS 26/18
0591 7182 026
50
18.0
27-29mm
GBS 28/18
0591 7182 028
50
18.0
29-31mm
GBS 30/18
0591 7182 030
50
18.0
31-34mm
GBS 33/18
0591 7182 033
50
18.0
34-37mm
GBS 36/18
0591 7182 036
50
18.0
37-40mm
GBS 39/18
0591 7182 039
50
18.0
40-43mm
GBS 42/18
0591 7182 042
50
20.0
43-47mm
GBS 45/20
0591 7202 045
50
20.0
47-51mm
GBS 49/20
0591 7202 049
50
20.0
51-55mm
GBS 53/20
0591 7202 053
50
20.0
55-59mm
GBS 57/20
0591 7202 057
50
20.0
59-63mm
GBS 61/20
0591 7202 061
50
20.0
63-68mm
GBS 66/20
0591 7202 066
50
25.0
68-73mm
GBS 71/25
0591 7252 071
25
25.0
73-79mm
GBS 76/25
0591 7252 076
25
25.0
79-85mm
GBS 82/25
0591.7252 082
25
25.0
85-91mm
GBS 88/25
0591 7252 088
25
25.0
91-97mm
GBS 94/25
0591 7252 094
25
25.0
97-104mm
GBS 101/25
0591 7252 101
25
25.0
104-112mm
GBS 108/25
0591 7252 108
25
25.0
112-121mm
GBS 117/25
0591 7252 117
25
25.0
121-130mm
GBS 126/25
0591 7252 126
25
30.0
130-140mm
GBS 135/30
0591 7302 135
10
30.0
140-150mm
GBS 145/30
0591 7302 145
10
30.0
150-162mm
GBS 156/30
0591 7302 156
10
30.0
162-174mm
GBS 168/30
0591 7302 168
10
30.0
174-187mm
GBS 181/30
0591 7302 181
10
30.0
187-200mm
GBS 194/30
0591 7302 194
10
30.0
200-213mm
GBS 207/30
0591 7302 207
10
30.0
213-226mm
GBS 220/30
0591 7302 220
10
30.0
226-239mm
GBS 233/30
0591 7302 233
10
30.0
239-252mm
GBS 246/30
0591 7302 246
10
29
W4
NORMACLAMP® GBSM Heavy Duty Bolt Clamps are built for those applications where a high strength
clamp is required. The GBSM clamp delivers a firm but gentle grip on tough industrial hoses such as
suction and pressure hose. W4 Material Grade: Stainless Steel (AISI 304).
Band
Width
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
20.0
20.0
20.0
20.0
20.0
20.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30
Clamping
Range
17-19mm
19-21mm
21-23mm
23-25mm
25-27mm
27-29mm
29-31mm
31-34mm
34-37mm
37-40mm
40-43mm
43-47mm
47-51mm
51-55mm
55-59mm
59-63mm
63-68mm
68-73mm
73-79mm
79-85mm
85-91mm
91-97mm
97-104mm
104-112mm
112-121mm
121-130mm
130-140mm
140-150mm
150-162mm
162-174mm
174-187mm
187-200mm
200-213mm
213-226mm
226-239mm
239-252mm
252-265mm
265-278mm
278-291mm
291-304mm
304-317mm
317-330mm
Part No.
GBS 18/18
GBS 20/18
GBS 22/18
GBS 24/18
GBS 26/18
GBS 28/18
GBS 30/18
GBS 33/18
GBS 36/18
GBS 39/18
GBS 42/18
GBS 45/20
GBS 49/20
GBS 53/20
GBS 57/20
GBS 61/20
GBS 66/20
GBS 71/25
GBS 76/25
GBS 82/25
GBS 88/25
GBS 94/25
GBS 101/25
GBS 108/25
GBS 117/25
GBS 126/25
GBS 135/30
GBS 145/30
GBS 156/30
GBS 168/30
GBS 181/30
GBS 194/30
GBS 207/30
GBS 220/30
GBS 233/30
GBS 246/30
GBS 259/30
GBS 272/30
GBS 285/30
GBS 298/30
GBS 311/30
GBS 324/30
W4 Clamps
Item No.
0591 9184 018
0591 9184 020
0591 9184 022
0591 9184 024
0591 9184 026
0591 9184 028
0591 9184 030
0591 9184 033
0591 9184 036
0591 9184 039
0591 9184 042
0591 9204 045
0591 9204 049
0591 9204 053
0591 9204 057
0591 9204 061
0591 9204 066
0591 9254 071
0591 9254 076
0591 9254 082
0591 9254 088
0591 9254 094
0591 9254 101
0591 9254 108
0591 9254 117
0591 9254 126
0591 5002 135
0591 5002 145
0591 5003 156
0591 5002 168
0591 5002 181
0591 5003 194
0591 5003 207
0591 5002 220
0591 5002 233
0591 5002 246
0591 5002 259
0591 5000 272
0591 5000 285
0591 5000 298
0591 5000 311
0591 5000 324
Pack
Qty
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
5
5
5
5
5
5
5
5
5
5
2
2
2
2
2
2
NORMACLAMP® GBSM W4 Heavy Duty Clamp (Trade Packs)
W4
NORMACLAMP® GBSM Heavy Duty Bolt Clamps are built for those applications where a high strength
clamp is required. The GBSM clamp delivers a firm but gentle grip on tough industrial hoses such as
suction and pressure hose. W4 Material Grade: Stainless Steel (AISI 304).
Band
Width
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
20.0
20.0
20.0
20.0
20.0
20.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
Clamping
Range
17-19mm
19-21mm
21-23mm
23-25mm
25-27mm
27-29mm
29-31mm
31-34mm
34-37mm
37-40mm
40-43mm
43-47mm
47-51mm
51-55mm
55-59mm
59-63mm
63-68mm
68-73mm
73-79mm
79-85mm
85-91mm
91-97mm
97-104mm
104-112mm
112-121mm
121-130mm
130-140mm
140-150mm
150-162mm
162-174mm
174-187mm
187-200mm
200-213mm
213-226mm
226-239mm
239-252mm
252-265mm
265-278mm
278-291mm
291-304mm
304-317mm
317-330mm
Part No.
GBS 18/18
GBS 20/18
GBS 22/18
GBS 24/18
GBS 26/18
GBS 28/18
GBS 30/18
GBS 33/18
GBS 36/18
GBS 39/18
GBS 42/18
GBS 45/20
GBS 49/20
GBS 53/20
GBS 57/20
GBS 61/20
GBS 66/20
GBS 71/25
GBS 76/25
GBS 82/25
GBS 88/25
GBS 94/25
GBS 101/25
GBS 108/25
GBS 117/25
GBS 126/25
GBS 135/30
GBS 145/30
GBS 156/30
GBS 168/30
GBS 181/30
GBS 194/30
GBS 207/30
GBS 220/30
GBS 233/30
GBS 246/30
GBS 259/30
GBS 272/30
GBS 285/30
GBS 298/30
GBS 311/30
GBS 324/30
W4 Clamps
Item No.
0591 7184 018
0591 7184 020
0591 7184 022
0591 7184 024
0591 7184 026
0591 7184 028
0591 7184 030
0591 7184 033
0591 7184 036
0591 7184 039
0591 7184 042
0591 7204 045
0591 7204 049
0591 7204 053
0591 7204 057
0591 7204 061
0591 7204 066
0591 7254 071
0591 7254 076
0591 7254 082
0591 7254 088
0591 7254 094
0591 7254 101
0591 7254 108
0591 7254 117
0591 7254 126
0591 7304 135
0591 7304 145
0591 7304 156
0591 7304 168
0591 7304 181
0591 7304 194
0591 7304 207
0591 7304 220
0591 7304 233
0591 7304 246
0591 7304 259
0591 7304 272
0591 7304 285
0591 7304 298
0591 7304 311
0591 7304 324
Pack
Qty
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
31
NORMACLAMP® GBSM Extreme Clamp & Merchandiser
Band
Width
Clamping
Range
Part No.
Clamps
Item No.
20.0
59-63mm
GBS61/20C
0591 5000 061
1
20.0
63-68mm
GBS66/20C
0591 5000 066
1
25.0
68-73mm
GBS71/25C
0591 5000 071
1
25.0
73-79mm
GBS76/25C
0591 5000 076
1
25.0
79-85mm
GBS82/25C
0591 5000 082
1
25.0
85-91mm
GBS88/25C
0591 5000 088
1
NORMACLAMP® GBSM75 Merchandiser w1, w2 & w4
Band Width
mm
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
20.0
20.0
20.0
20.0
20.0
20.0
25.0
25.0
25.0
25.0
25.0
25.0
32
Pack
Qty
Contents
Part No.
GBS18/18
GBS22/18
GBS28/18
GBS30/18
GBS33/18
GBS36/18
GBS39/18
GBS42/18
GBS45/20
GBS49/20
GBS53/20
GBS57/20
GBS61/20
GBS66/20
GBS71/25
GBS76/25
GBS82/25
GBS88/25
GBS108/25
GBS117/25
Clip
Clamping Range Hose
Qty
17-19mm
4
21-23mm
4
27-29mm
4
29-31mm
4
31-34mm
4
34-37mm
4
37-40mm
4
40-43mm
4
43-47mm
4
47-51mm
4
51-55mm
4
55-59mm
4
59-63mm
4
63-68mm
4
68-73mm
4
73-79mm
3
79-85mm
3
85-91mm
3
104-112mm
3
112-121mm
3
REFERENCES AND CONVERSIONS
TORRO® RECOMMENDED TIGHTENING TORQUES
Clamping Range
TORRO®
TORRO®
TORRO s®
TORRO s®
8-12
-
-
2.5 Nm
-
8-16
2.0 Nm
-
3.0 Nm
from 12-22
3.0 Nm
-
3.0 Nm
-
from 16-27
-
5.0 Nm
-
5.0 Nm
MATERIALS
DIN
W1
AISI/AS
Band and Housing: Alu-Zinc
W2: Band and Housing
Screw: Zinc Plated Steel and Chromated
1.4016
W2: Screw
430
Zinc Plated Steel and Chromated
W3
1.4016
430
W4
1.4301
304
W5
1.4401/1.4571
316/316TI
1.4310
301
Tension Spring
BREEZE® SLOTTED BAND - (SAE STYLE)
W2
8mm Band = 1.7 Nm (min)
W4
8mm Band = 1.7 Nm (min)
12mm Band = 5 Nm
-
12mm Band = 4 Nm
Quick Release W3
12mm Band = 5 Nm
W3 High Torque and CT
-
16mm Band = 10 Nm
T-Bolt
-
19mm Band = 6.8 Nm
NORMACLAMP® GBS - Corrosion Resistance
NORMACLAMP® GBS - Torques
Material
Corrosion Resistance in
salt spray testing
Bandwidth
Recommended
Tightening torque
W1
Min. 144 h
18
8 Nm
W2
Min. 72 h
20
10 Nm
W3
Min. 200 h*
25
20 Nm
W4
Min. 240 h
30
25 Nm
W5
Min. 400 h
33
NORMACLAMP® MERCHANDISERS
NORMA® has a range of merchandising solutions for many of products.
NORMACLAMP® NHC140W2 Merchandiser
Band Width
mm
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
Flexidriver
Contents
Part No.
8-12/9W2
8-16/9W2
12-20/9W2
16-25/9W2
20-32/9W2
25-40/9W2
30-45/9W2
32-50/9W2
40-60/9W2
50-70/9W2
60-80/9W2
SW7 Flexidriver
Clamping
Range
8-12mm
8-16mm
12-20mm
16-25mm
20-32mm
25-40mm
30-45mm
32-50mm
40-60mm
50-70mm
60-80mm
7mm Hex
Hose Clip
Qty
12
12
12
20
12
12
12
12
12
12
12
1
* NFC80 Additional fuel clip as shown here available at extra cost.
34
W2
Band Width
mm
9.0
9.0
9.0
12.0
12.0
12.0
12.0
12.0
Contents
Part No.
Clamping
Range
Hose Clip
Qty
8-12/9W1
10-16/9W1
12-22/9W1
16-27/12W1
20-32/12W1
25-40/12W1
35-50/12W1
40-60/12W1
8-12mm
10-16mm
12-22mm
16-27mm
20-32mm
25-40mm
35-50mm
40-60mm
20
20
20
15
15
15
15
15
Item No.
NHC
135W1
0825
0300
006
Band Width
mm
7.5
9.0
9.0
12.0
12.0
12.0
12.0
12.0
Contents
Part No.
Clamping
Range
Hose Clip
Qty
10-16/7.5W3
8-16/9W3
12-20/9W3
16-27/12W3
20-32/12W3
25-40/12W3
35-50/12W3
40-60-/12W3
10-16mm
8-16mm
12-20mm
16-27mm
20-32mm
25-40mm
35-50mm
40-60mm
20
20
20
15
15
15
15
15
Item No.
NHC
135W3
0825
0300
008
Band Width
mm
9.0
9.0
12.0
12.0
12.0
12.0
12.0
Contents
Part No.
Clamping
Range
Hose Clip
Qty
Item No.
8-16/9
12-20/9
16-27/12
20-32/12
25-40/12
35-50/12
40-60-/12
8-16mm
12-20mm
16-27mm
20-32mm
25-40mm
35-50mm
40-60mm
20
20
15
15
15
15
15
NHC
135W4
Kits, tools & Merchandisers
NORMACLAMP® MERCHANDISERS
0825
0300
010
35
NORMACLAMP® MERCHANDISERS & KITS
NORMACLAMP® NFC105 FUEL LINE CLAMP Assortment Kit W1 & W4
Band Width
mm
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
Contents
Part No.
SL7-9/9
SL9-11/9
SL10-12/9
SL11-13/9
SL12-14/9
SL13-15/9
SL14-16/9
SL15-17/9
Clamping
Range
7-9mm
9-11mm
10-12mm
11-13mm
12-14mm
13-15mm
14-16mm
15-17mm
Hose Clip
Item No.
Qty
10
15
NFC105W1
15
0825 0303 000
15
NFC105W4
15
0825 00303 001
15
10
10
NORMACLAMP® NHC 100/W1 Assortment Kit
0825 0300 002
Band Width
Contents
Clamping Range Hose Clip
mm
9.0
9.0
9.0
9.0
9.0
12.0
12.0
12.0
12.0
12.0
Flexidriver
Part No.
SL9-11/9W1
SL11-13/9W1
8-12/9W1
10-16/9W1
12-22/9W1
16-27/12W1
20-32/12W1
25-40/12W1
35-50/12W1
40-60/12W1
SW7
9-11mm
11-13mm
8-12mm
10-16mm
12-22mm
16-27mm
20-32mm
25-40mm
35-50mm
40-60mm
7mm Hex
Qty
10
10
10
12
10
10
8
10
10
10
1
NORMACLAMP® NHC100W3 Assortment Kit
0825 0300 005 Band Width
mm
7.5
9.0
9.0
9.0
9.0
12.0
12.0
12.0
12.0
12.0
Flexidriver
36
Contents
Part No.
10-16/7.5W3
SL9-11/9W1
SL11-13/9W1
8-16/9W3
12-20/9W3
16-27/12W3
20-32/12W3
25-40/12W3
35-50/12W3
40-60/12W3
SW6/7
Clip
Clamping Range Hose
Qty
10-16mm
10
9-11mm
10
11-13mm
10
8-16mm
12
12-20mm
10
16-27mm
10
20-32mm
8
25-40mm
10
35-50mm
10
40-60mm
10
6 & 7mm Hex
1
NORMACLAMP® NHC 100/W4 Assortment Kit 0825 0300 058 Band Width
mm
9.0
9.0
9.0
9.0
12.0
12.0
12.0
12.0
12.0
Flexidriver
Contents
Part No.
Mini 10/9W4
Mini 12/9W4
8-16/9W4
12-20/9W4
16-27/12W4
20-32/12W4
25-40/12W4
35-50/12W4
40-60/12W4
SW6/7
Clip
Clamping Range Hose
Qty
9.5-11mm
10
11.5-13mm
10
8-16mm
12
12-20mm
20
16-27mm
10
20-32mm
8
25-40mm
10
35-50mm
10
40-60mm
10
6 & 7mm Hex
1
NORMACLAMP® NHC100CT CONSTANT TENSION
CLAMP Assortment Kit
Band Width
mm
9.0
9.0
7.5
9.0
9.0
9.0
9.0
9.0
9.0
9.0
Flexidriver
Contents
Part No.
SL9-11/9W1
SL11-13/9W1
10-16/7.5
8-16/9
12-20/9CT
16-25/9CT
20-32/9CT
25-40/9CT
32-50/9CT
40-60/9CT
SW6/7
Clip
Clamping Range Hose
Qty
9-11mm
10
11-13mm
10
10-16mm
10
8-16mm
12
12-20mm
10
16-25mm
10
20-32mm
8
25-40mm
10
32-50mm
10
40-60mm
10
6 & 7mm Hex
1
List Price Each
& Item No.
NHC100CT
0825 0300 003
37
NORMACLAMP® NHC130W1 Space Saver Rack
Band Width
mm
9.0
9.0
9.0
12.0
12.0
12.0
12.0
12.0
Flexidriver
Contents
Part No.
8-12/9W1
10-16/9W1
12-22/9W1
16-27/12W1
20-32/12W1
25-40/12W1
35-50/12W1
40-60/12W1
SW7
Clip
Clamping Range Hose
Qty
8-12mm
20
10-16mm
20
12-22mm
20
16-27mm
30
20-32mm
10
25-40mm
10
35-50mm
10
40-60mm
10
7mm
2
Item No.
NHC130W1
0825 0300 019
NORMACLAMP® NHC130W3 Space Saver Rack
Band Width
mm
9.0
9.0
12.0
12.0
12.0
12.0
12.0
Flexidriver
Contents
Part No.
8-16/9W3
12-20/9W3
16-27/12W3
20-32/12W3
25-40/12W3
35-50/12W3
40-60/12W3
SW7
Clip
Clamping Range Hose
Qty
8-16mm
30
12-20mm
30
16-27mm
30
20-32mm
10
25-40mm
10
35-50mm
10
40-60mm
10
7mm
2
Item No.
NHC130W3
0825 0300 020
NORMACLAMP® NHC130CT CONSTANT TENSION CLAMP Rack
Band Width
mm
9.0
9.0
9.0
9.0
9.0
9.0
9.0
Flexidriver
38
Contents
Part No.
8-16/9W2
12-20/9CT
16-25/9CT
20-32/9CT
25-40/9CT
32-50/9CT
40-60/9CT
SW7
Clip
Clamping Range Hose
Qty
8-16mm
30
12-20mm
30
16-25mm
30
20-32mm
10
25-40mm
10
32-50mm
10
40-60mm
10
7mm
1
Item No.
NHC130CT
0825 0300 026
NORMACLAMP® NHC190W1 Merchandiser - 0825 0300 059
Band Width
mm
9.0
9.0
9.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
Contents
Clip
Clamping Range Hose
Part No.
Qty
8-12/9W1
8-12mm
10
10-16/9W1
10-16mm
10
12-22/9W1
12-22mm
10
16-27/12W1
16-27mm
10
20-32/12W1
20-32mm
10
25-40/12W1
25-40mm
10
30-45/12W1
30-45mm
10
35-50/12W1
35-50mm
10
40-60/12W1
40-60mm
10
50-70/12W1
50-70mm
10
60-80/12W1
60-80mm
10
70-90/12W1
70-90mm
10
80-100/12W1
80-100mm
10
90-110/12W1
90-110mm
10
100-120/12W1
100-120mm
10
110-130/12W1
110-130mm
10
120-140/12W1
120-140mm
10
130-150/12W1
130-150mm
10
140-160/12W1
140-160mm
10
NORMACLAMP® NHC190W3 Merchandiser - 0825 0300 060
Band Width
mm
7.5
9.0
9.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
Contents
Clip
Clamping Range Hose
Part No.
Qty
8-12/7.5W3
8-12mm
10
8-16/9W3
8-16mm
10
12-20/9W3
12-20mm
10
16-27/12W3
16-27mm
10
20-32/12W3
20-32mm
10
25-40/12W3
25-40mm
10
30-45/12W3
30-45mm
10
35-50/12W3
35-50mm
10
40-60/12W3
40-60mm
10
50-70/12W3
50-70mm
10
60-80/12W3
60-80mm
10
70-90/12W3
70-90mm
10
80-100/12W3
80-100mm
10
90-110/12W3
90-110mm
10
100-120/12W3
100-120mm
10
110-130/12W3
110-130mm
10
120-140/12W3
120-140mm
10
130-150/12W3
130-150mm
10
140-160/12W3
140-160mm
10
39
Band Width
mm
9.0
9.0
9.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
40
Contents
Clip
Clamping Range Hose
Part No.
Qty
8-12/9W4
8-12mm
10
8-16/9W4
10-16mm
10
12-20/9W4
12-20mm
10
16-27/12W4
16-27mm
10
20-32/12W4
20-32mm
10
25-40/12W4
25-40mm
10
30-45/12W4
30-45mm
10
35-50/12W4
35-50mm
10
40-60/12W4
40-60mm
10
50-70/12W4
50-70mm
10
60-80/12W4
60-80mm
10
70-90/12W4
70-90mm
10
80-100/12W4
80-100mm
10
90-110/12W4
90-110mm
10
100-120/12W4
100-120mm
10
110-130/12W4
110-130mm
10
120-140/12W4
120-140mm
10
130-150/12W4
130-150mm
10
140-160/12W4
140-160mm
10
Item No.
W4
0825 0300 061
W4
NORMACLAMP® NHC420W1 Merchandiser p/n 0825 0300 039
Band Width
mm
9.0
9.0
9.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
Contents
Part No.
8-12/9W1
10-16/9W1
12-22/9W1
16-27/12W1
20-32/12W1
25-40/12W1
30-45/12W1
35-50/12W1
40-60/12W1
50-70/12W1
70-90/12W1
80-100/12W1
90-110/12W1
Clip
Clamping Range Hose
Qty
8-12mm
50
10-16mm
50
12-22mm
50
16-27mm
40
20-32mm
30
25-40mm
40
30-45mm
40
35-50mm
40
40-60mm
30
50-70mm
20
70-90mm
10
80-100mm
10
90-110mm
10
NORMACLAMP® NHC420W3 Merchandiser P/N 0825 0300 040
Band Width
mm
7.5
9.0
9.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
Contents
Part No.
10-16/7.5W3
8-16/9W3
12-20/9W3
16-27/12W3
20-32/12W3
25-40/12W3
30-45/12W3
35-50/12W3
40-60/12W3
50-70/12W3
70-90/12W3
80-100/12W3
90-110/12W3
Clip
Clamping Range Hose
Qty
8-12mm
50
8-16mm
50
12-20mm
50
16-27mm
40
20-32mm
30
25-40mm
40
30-45mm
40
35-50mm
40
40-60mm
30
50-70mm
20
70-90mm
10
80-100mm
10
90-110mm
10
NORMACLAMP® NHC420W4 Merchandiser p/n 0825 0300 049
Band Width
mm
9.0
9.0
9.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
Contents
Part No.
8-12/9W4
8-16/9W4
12-20/9W4
16-27/12W4
20-32/12W4
25-40/12W4
30-45/12W4
35-50/12W4
40-60/12W4
50-70/12W4
70-90/12W4
80-100/12W4
90-110/12W4
Clip
Clamping Range Hose
Qty
8-12mm
50
10-16mm
50
12-20mm
50
16-27mm
40
20-32mm
30
25-40mm
40
30-45mm
40
35-50mm
40
40-60mm
30
50-70mm
20
70-90mm
10
80-100mm
10
90-110mm
10
41
NORMAclamp® tools
NORMA® QUICK DISASSEMBLY TOOL SET (2-PIECE PACK)
NORMA
Part Number
0715 8038
010
0715 8145
008
Colour
Description
Blue
Suit 3/8" Connectors
Red
Suit 5/16"
Connectors
Item No.
NDT 2
0825 0307 003
Flexidrivers - suit Worm Drive Hose Clamps
Size
Part No.
Item No.
Pack Qty
6mm
7mm
7mm
6-7mm
1/4" & 5/16"
5/16"
SW6
SW7
SW7L
SW6/7
SW6/8
SW8L
0000 0000 899
0000 0000 898
0825 0307 008
0000 0000 894
0825 0307 007
0825 0307 010
1
1
1
1
1
1
Cobra® Hand Tool
Product
Code
CHT1
CHT2
Part No.
0110 8420 000
0110 8420 004
Pack
Qty
1
1
pro
tool
CHT1
42
economy
tool
CHT2
Ear Clamp Pincers
Pneumatic pincers also available.
Description
Cat. No.
Hand Pincer - Normal
Hand Pincer - Side Closing
1098
1099
Part No.
Item No.
14100329 0821 0320 006
14100083 0821 0320 007
SPRINGBAND CLAMP INSTALLATION TOOL
Description
Hand held plier with
intergrated safety lever suits all diameters
Cat. No
Part No.
Pack
Qty
798-12
0115 0000 904
1
Pack
Qty
1
1
NORMAclamp® tools
Pneumatic pincers also available.
43
Quality in Every Detail
Made in sweden
44
premium ®
normaclamp
hose clamps
ABA® began manufacturing in Sweden in 1896 - over 100 years ago.
We are world renowned for our exceptionally high quality products
and innovative clamping design features.
ABA® are world leaders in the engineered design and production
of hose and pipe connections for various industrial applications.
ABA® is one of the few manufacturers with access
to extensive in-house system testing facilities,
ensuring tested, proven, top quality products.
ABA® products are produced to the Swedish
Standard SS 2298.
45
Made in sweden
ABA® - Safeseal Technology
ABA® clamps are designed to have clamping force reserve and not break. They maintain a continuous
sealing force around the hose when tightened.
ABA® is one of the very few manufacturers with access to extensive in-house system testing facilities. The most well know product ABA® has to offer is the Worm Gear Clamp, of Swedish Standard SS
2298. The unique one-piece pressed housing design provides a high clamping force and a high break
torque. The ABA® Original Worm Gear Clamp is also known by professionals as “the blue housing
clamp”. ABA® products use the best steel available.
Specially produced tubes are used for our ABA® Original worm-drive housings that are pressed into
their geometric final form in one single step. This results in a worm drive housing without a joint often the weakest point in achieving a high breaking torque.
International Standards
SS = Swedish Standard
DIN = Deutsches Institut für Normung
AISI = American Iron and Steel Institute.
ABA® - Original Hose Clamps
ABA® Original can be used, with the correct tightening torque, for a large number of applications. The smooth
underside and rolled-up band edges are gentle on the hose and reduce the risk of leakages. They will reliably
continue to develop a sealing force around the hose when tightened 360° around the joint. ABA® Original,
provide a huge clamping force and a leakproof connection.
ABA® features a one-piece pressed housing, ABA® the worm gear housing is pressed from custom-made
piping to an interior tolerance of a few hundredths of a millimetre. ABA® worm gear housings withstand high
breaking torques due to the design in comparison with riveted, welded or folded housing designs. ABA® is
designed for longevity, our products can be reused many times. We constantly strive for quality.
46
ABA® Nova - Aluzink S20 & SS S40
New Generation ABA® Nova clamps have a new design housing positioned to evenly distribute a high
clamping force and give safer guidance of hose. ABA® Nova clamps surpass the test torques of DIN 3017.
Original-S20: Screw: Electro zinc plated. Band: Aluzink. Housing: Painted.
Stainless Steel-S40 (W4): All parts in SS 2333/AISI 304 Stainless Steel.
aba® nova SMS ALUZINK (W1) - 10 packs
Contents
Part No.
Norma
Part No.
Contents
Part No.
Norma
Part No.
Band
Width
mm
Clamping
Range
9.0
8-14 mm
AH537/10
8115009011
AH037/10
8115007011
W1
9.0
11-17 mm
AH538/10
8115007014
AH038/10
8115008014
W1
9.0
13-20 mm
AH539/10
8115008017
AH039/10
8115009017
W1
Standard - NO Collar
collared stock
Materiel
Grade
aba® nova SMS STAINLESS STEEL (W4) - 10 packs
Band
Width
mm
9.0
Clamping
Range
Contents
Part No.
Norma
Part No.
8-14 mm AH4537/10
Contents
Part No.
Norma
Part No.
Materiel
Grade
collared stock
8115010011
AH4037/10
8115008011
W4
9.0
11-17 mm
AH4538/10
8115009014
AH4038/10
8115010014
W4
9.0
13-20 mm
AH4539/10
8115010017
AH4039/10
8115007017
W4
47
W1
ABA® original aluzink s20 (W1)
The trouble-free clamp with high tightening force and breaking torque. Original clamps feature an extra
strong one-piece pressed housing, rolled-up band edges and a smooth band underside that protects the
hose. Original Standard-S20: Screw: Electro zinc plated. Band: Aluzink. Housing: Painted.
Stainless Steel-S40 (W4): All parts in SS 2333/ AISI 304 Stainless Steel.
aba® original aluzink s20 (W1) - 10 packs
48
Contents
Part No.
Norma
Part No.
Contents
Part No.
Norma
Part No.
120
Band
Width
mm
Clamping
Range
mm
12.0
15- 24 mm
AH540A/10
8135008020
AH040A/10
8135010020
12.0
19- 28 mm
AH540/10
8135007024
AH040/10
8135006024
12.0
22- 32 mm
AH551/10
8135004027
AH051/10
8135006027
12.0
26- 38 mm
AH541/10
8135008032
AH041/10
8135006032
12.0
32- 44 mm
AH549/10
8135008038
AH049/10
8135006038
12.0
38- 50 mm
AH542A/10
8135010044
AH042A/10
8135008044
12.0
44- 56 mm
AH542/10
8135008050
AH042/10
8135010050
12.0
50- 65 mm
AH542X/10
8135009058
AH042X/10
8135007058
12.0
58- 75 mm
AH543/10
8135008067
AH043/10
8135010067
12.0
68- 85 mm
AH543X/10
8135007077
AH043X/10
8135009077
12.0
77- 95 mm
AH544/10
8135005086
AH044/10
8135008086
12.0
87-112 mm
AH545/10
8135005100
AH045/10
8135007100
12.0
104-138 mm
AH546/10
8135004121
AH046/10
8135005121
12.0
130-165 mm
AH547/10
813 5005148
AH047/10
8135004148
12.0
150-180 mm
AH548/10
8135003165
AH048/10
8135004165
12.0
175-205 mm
AH552/10
8135004190
AH052/10
8135006190
12.0
200-231 mm
AH553/10
8135003216
AH053/10
8135004216
12.0
226-256 mm
AH559/10
8135004241
AH059/10
8135006241
12.0
12.0
251-282 mm
AH560/10
8135004267
AH060/10
8135006267
12.0
277-307 mm
AH561/10
8135004292
AH061/10
8135006292
collared stock
ABA® original stainless steel s40 (W4)
W4
The trouble-free clamp with high tightening force and breaking torque. Original clamps feature an extra
strong one-piece pressed housing, rolled-up band edges and a smooth band underside that protects the
hose. Stainless Steel-S40 (W4): All parts in SS 2333/ AISI 304 Stainless Steel.
aba® original aluzink s20 (W1) - 10 packs
Contents
Part No.
Norma
Part No.
Contents
Part No.
Norma
Part No.
120
Band
Width
mm
Clamping
Range
mm
12.0
15- 24 mm AH4540A/10 8135009020 AH4040A/10
8135011020
12.0
19- 28 mm AH4540/10 8135008024 AH4040/10
8135009024
12.0
22- 32 mm AH4551/10 8135009027 AH4051/10
8135007027
12.0
26- 38 mm AH4541/10 8135009032 AH4041/10
8135007032
12.0
32- 44 mm AH4549/10 8135009038 AH4049/10
8135007038
12.0
38- 50 mm AH4542A/10 8135011044 AH4042A/10
8135009044
12.0
44- 56 mm AH4542/10 8135009050 AH4042/10
8135007050
12.0
50- 65 mm AH4542X/10 8135010058 AH4042X/10
8135008058
12.0
58- 75 mm AH4543/10 8135009067 AH4043/10
8135007067
12.0
68- 85 mm AH4543X/10 8135008077 AH4043X/10
8135005077
12.0
77- 95 mm AH4544/10 8135007086 AH4044/10
8135009086
12.0
87-112 mm AH4545/10
AH4045/10
8135004100
12.0
104-138 mm AH4546/10
AH4046/10
8135003121
12.0
130-165 mm AH4547/10
AH4047/10
8135007148
12.0
150-180 mm AH4548/10
AH4048/10
8135005165
12.0
175-205 mm AH4552/10 8135005190 AH4052/10
8135007190
12.0
200-231 mm AH4553/10
AH4053/10
8135005216
12.0
226-256 mm AH4559/10 8135005241 AH4059/10
8135007241
12.0
251-282 mm AH4560/10 8135005267 AH4060/10
8135007267
12.0
277-307 mm AH4561/10 8135005292 AH4061/10
8135007292
collared stock
Made in sweden
49
W1
ABA® MERCHANDISERS
Band
Width
mm
9.0
Clamping
Range
mm
8-14/9W1
Clamp
QTY
9.0
11-17/9W1
12
12
9.0
13-20/9W1
12
12.0
15-24/12W1
20
12.0
19-28/12W1
12
12.0
22-32/12W1
12
12.0
26-38/12W1
12
12.0
32-44/12W1
12
12.0
38-50/12W1
12
12.0
44-56/12W1
12
12.0
50-65/12W1
12
Tool
SW7
1
total
140
* NFC80 Additional fuel clip as shown
here available at extra cost.
Band
Width
mm
9.0
50
AHC140 W1
Standard Clamp Merchandiser
Part Number: 0825 0300 065
Clamping
Range
mm
7-9 mm
Clamp
QTY
9.0
9-11 mm
10
9.0
10-12 mm
10
9.0
11-13 mm
10
9.0
12-14 mm
10
9.0
13-15 mm
10
9.0
14-16 mm
10
9.0
15-17 mm
10
total
80
AHC140 W1C
Clamps With Collars Merchandiser
Part Number: 0825 0300 067
Picture for illustrative purpose only, tool may
differ slightly.
10
FUEL CLIP EXTENTION
NFC80 ALUZINK W1
part number: 0825 0303 002
ABA® AHC140 SS W4 - STD. 0825 0300 066 - COLLARED 0825 0300 068
Clamping
Range
mm
Contents
Part No.
9.0
8-14/9W4
AH4537
8116110011
AH4037
8116110011
12
9.0
11-17/9W4
AH4538
8116110014
AH4038
8116110014
12
9.0
13-20/9W4
AH4539
8116110017
AH4039
8116110017
12
12.0
15-24/12W4
AH4540A
8134003020
AH4040A
8134003020
20
12.0
19-28/12W4
AH4540A
8134003024
AH4040A
8134003024
12
12.0
22-32/12W4
AH4551
8134003027
AH4051
8134003027
12
12.0
26-38/12W4
AH4541
8134003032
AH4041
8134003032
12
12.0
32-44/12W4
AH4549
8134003038
AH4049
8134003038
12
12.0
38-50/12W4
AH4542A
8134003044
AH4042A
8134003044
12
12.0
44-56/12W4
AH4542
8134003050
AH4042
8134003050
12
12.0
50-65/12W4
AH4542X
8134003058
AH4042X
8134003058
12
Tool
SW7
Band
Width
mm
Norma
Part No.
Contents
Part No.
Norma
Part No.
collared stock
0000 0000 898
0000 0000 898
1
TOTAL
140
ABA® FUEL CLIP EXTENTION - NFC80 SS W4 - 0825 0303 003
Band
Width
mm
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
Clamping
Range
mm
7-9 mm
9-11 mm
10-12 mm
11-13 mm
12-14 mm
13-15 mm
14-16 mm
15-17 mm
Contents
Part No.
Norma
Part No.
Clamp
QTY
MINI 8/9W4
MINI 9/9W4
MINI 10/9W4
MINI 11/9W4
MINI 12/9W4
MINI 13/9W4
MINI 14/9W4
MINI 15/9W4
0810 5000 008
0810 5000 009
0810 5001 010
0810 5001 011
0810 5001 012
0810 5000 013
0810 5000 014
0810 5000 015
TOTAL
10
10
10
10
10
10
10
10
80
* NFC80 Additional fuel clip as shown
here available at extra cost.
Clamp
QTY
Picture for illustrative purpose only
W4
51
Breeze® Industrial Products designs and
manufactures one of the most comprehensive lines
of perforated worm-drive and T-Bolt/ V-Band hose
clamps available in the world.
Ultimate customer satisfaction is at the heart
of everything we do.
Decades of product development and
manufacturing experience have given us the
understanding of industry trends and challenges.
All our products are made in the USA from high
grade material to ensure superior performance
and durability, maintaining our status as leaders
in Joining Technology™.
Made in usa
53
W2
breeze® mini SERIES
BREEZE® General Purpose Perforated Worm-Gear Hose mini clamp is a lightweight, streamlined clamp
generally used in small diameter applications such as air & fuel lines. The streamlined configuration allows for installation in tight fitting or difficult to reach areas. This clamp creates high sealing pressure with
only 10 to 15 in./lbs (1.1 - 1.7Nm) of installation torque.
Available in 80% Stainless Steel, 410 St/St, 300 St/St and all 316 Stainless Steel. Standard 5/16”
(7.9mm) band. 1/4” (6.4mm) slotted hex head screw. Built to SAE standard J1508 Type “M”.
Please note outer pack quantities will not be split.
BREEZE® 35 Series - Carbon Zinc Plated Screw Minatures 5/16” Band; 1/4” Hex Screw
Diameter Range
(mm)
Min
Max
Breeze® Part No.
Norma Item
Number
Pack
QTY
Carton
Qty
3504
0360 1199 006
5.6mm
16mm
10
500
3506
0360 1100 008
3508
0360 1193 013
11mm
20mm
10
500
13mm
23mm
10
200
3510
0360 1190 016
14mm
27mm
10
200
3505 LINER
0360 9192 008
13mm
17mm
10
500
BREEZE® 35 Series - Carbon Zinc Plated Screw Minatures 5/16” Band; 1/4” Hex Screw
54
Diameter Range
(mm)
Min
Max
Breeze® Part No.
Norma Item
Number
Carton
Qty
3504B
0360 0198 006
5.6mm
16mm
1000
3506B
0360 0199 010
11mm
20mm
1000
3508B
0360 0100 013
13mm
23mm
1000
3510B
0360 0190 016
14mm
27mm
500
3505 LINER B
0360 8192 008
13mm
17mm
1000
breeze® POWER-SEAL 62 SERIES (Packed)
W2
BREEZE® worm-gear clamps with heavy duty 4-piece Quadra-Lock construction are designed for
use in general-purpose, industrial & automotive applications.
Material Grade: 80% Stainless Steel. Stainless steel band and housing with a carbon steel, hex
head screw. Standard 1/2” (12.7mm) band. 5/16” (7.9mm) slotted hex head screw. Built to SAE
standard J1508 Type “F”. Please note outer pack quantities will not be split.
BREEZE® Carbon Zinc Plated Hex Screw
Breeze® Part No.
Norma Item
Number
Diameter Range
(mm)
Min
Max
62006H
0361 1057 010
11mm
62008H
0361 1056 013
13mm
Pack
QTY
Carton
QTY
20mm
10
200
23mm
10
200
62010H
0361 1004 016
14mm
27mm
10
500
62012H
0361 1093 019
17mm
32mm
10
500
62016H
0361 1033 025
21mm
38mm
10
500
62020H
0361 1093 032
21mm
44mm
10
500
62024H
0361 1048 038
27mm
51mm
10
500
62028H
0361 1010 044
33mm
57mm
10
500
62032H
0361 1063 051
40mm
64mm
10
500
62036H
0361 1047 057
46mm
70mm
10
500
62040H
0361 1069 064
52mm
76mm
10
200
62044H
0361 1081 070
59mm
83mm
10
200
62048H
0361 1065 076
65mm
89mm
10
200
62052H
0361 1081 083
71mm
95mm
10
200
62056H
0361 1080 089
78mm
102mm
10
200
62060H
0361 1043 095
84mm
108mm
10
200
62064H
0361 1099 102
91mm
114mm
10
100
62072H
0361 1099 114
48mm
127mm
10
100
62080H
0361 1001 127
64mm
140mm
10
100
62088H
0361 1070 140
79mm
152mm
10
100
62096H
0361 1037 152
92mm
165mm
10
100
62104H
0361 1061 165
105mm
178mm
10
100
B= Bulk H= Pack
55
breeze® POWER-SEAL 62 SERIES (Trade Packs)
W2
BREEZE® worm-gear clamps with heavy duty 4-piece Quadra-Lock construction are designed for
use in general-purpose, industrial & automotive applications.
Material Grade: 80% Stainless Steel. Stainless steel band and housing with a carbon steel, hex
head screw. Standard 1/2” (12.7mm) band. 5/16” (7.9mm) slotted hex head screw. Built to SAE
standard J1508 Type “F”. Please note outer pack quantities will not be split.
Carbon Zinc Plated Hex Screw
Breeze®
Part Number
Diameter Range (mm)
Min
Max
Carton
QTY
62006B
0361 0002 010
11mm
20mm
500
62008B
0361 0012 013
13mm
23mm
500
62010B
0361 0079 016
14mm
27mm
500
62012B
0361 0077 019
17mm
32mm
800
62016B
0361 0074 025
21mm
38mm
800
62020B
0361 0010 032
21mm
44mm
800
62024B
0361 0045 038
27mm
51mm
600
62028B
0361 0017 044
33mm
57mm
600
62032B
0361 0017 051
40mm
64mm
500
62036B
0361 0025 057
46mm
70mm
500
62040B
0361 0015 064
52mm
76mm
500
62044B
0361 1081 070
59mm
83mm
500
62048B
0361 0089 076
65mm
89mm
400
62052B
0361 0077 083
71mm
95mm
400
62056B
0361 0027 089
78mm
102mm
300
62060B
0361 0049 095
84mm
108mm
300
62064B
0361 0095 102
91mm
114mm
200
62072B
0361 0080 114
48mm
127mm
200
62080B
0361 0016 127
64mm
140mm
200
62088B
0361 0044 140
79mm
152mm
200
62096B
0361 0056 152
92mm
165mm
200
62104B
0361 0032 165
105mm
178mm
200
62128B
0360 0030 019
140mm
216mm
200
B= Bulk H= Pack
56
Norma
Item Number
W4
breeze® mini SERIES - Stainless Steel
BREEZE® General Purpose Perforated Worm-Gear Hose mini clamp is a lightweight, streamlined clamp
generally used in small diameter applications such as air & fuel lines. The streamlined configuration
allows for installation in tight fitting or difficult to reach areas. This clamp creates high sealing pressure
with only 10 to 15 in./lbs (1.1 - 1.7Nm) of installation torque.
Available in 80% Stainless Steel, 410 St/St, 300 St/St and all 316 Stainless Steel. Standard 5/16”
(7.9mm) band. 1/4” (6.4mm) slotted hex head screw. Built to SAE standard J1508 Type “M”.
BREEZE® 37 Series - Mini’s 5/16” Band; 1/4” Hex Screw 300 Series SS Screw
Diameter Range
(mm)
Min
Max
Breeze® Part No.
Norma Item
Number
Pack
QTY
Carton
Qty
3704
0360 1194 006
5.6mm
16mm
10
500
3706
0360 1102 008
11mm
20mm
10
500
3708
0360 1192 013
13mm
23mm
10
200
3710
0360 1192 016
14mm
27mm
10
200
BREEZE® 37 Series - Minatures 5/16” Band; 1/4”
Hex Screw 300 Series SS Screw - Bulk
Diameter Range
(mm)
Min
Max
Carton
Qty
0360 0192 006
5.6mm
16mm
1000
3705B
0360 0102 008
13mm
17mm
1000
3706B
0360 0152 010
11mm
20mm
1000
3708B
0360 0102 013
13mm
23mm
1000
3710B
0360 0102 016
14mm
27mm
500
3712B
0360 0102 019
17mm
32mm
500
Breeze® Part No.
Norma Item
Number
3704B
57
W4
breeze® POWER-SEAL 63 SERIES (Packed)
BREEZE® worm-gear clamps with heavy duty 4-piece Quadra-Lock construction are designed
for use in general-purpose, industrial & automotive applications. Material Grade: 300 Series.
Stainless steel band, screw, saddle and housing. Standard 1/2” (12.7mm) band. 5/16” (7.9mm)
slotted hex head screw. Built to SAE standard J1508 Type “F”. Please note outer pack
quantities will not be split.
300 Stainless Steel Hex Screw
Breeze®
Part No.
Norma Item
Number
63006H
0361 1098 010
11mm
20mm
Pack
Qty
Carton Qty
10
200
63008H
0361 1032 013
13mm
23mm
10
200
63010H
0361 1016 016
14mm
27mm
10
500
63012H
0361 1028 019
17mm
32mm
10
500
63016H
0361 1088 025
21mm
38mm
10
500
63020H
0361 1097 032
21mm
44mm
10
500
63024H
0361 1092 038
27mm
51mm
10
500
63028H
0361 1027 044
33mm
57mm
10
500
63032H
0361 1062 051
40mm
64mm
10
500
63036H
0361 1001 057
46mm
70mm
10
500
63040H
0361 1061 064
52mm
76mm
10
200
63044H
0361 1009 070
59mm
83mm
10
200
63048H
0361 1044 076
65mm
89mm
10
200
63052H
0361 1090 083
71mm
95mm
10
200
63056H
0361 1010 089
78mm
102mm
10
200
63060H
0361 1069 095
84mm
108mm
10
200
63064H
0361 1055 102
91mm
114mm
10
100
63072H
0361 1047 114
48mm
127mm
10
100
63080H
0361 1052 127
64mm
140mm
10
100
63088H
0361 1008 140
79mm
152mm
10
100
63096H
0361 1068 152
92mm
165mm
10
100
63104H
0361 1097 165
105mm
178mm
10
100
63128B
0361 1032 203
143mm
216mm
10
100
63152B
0361 1052 241
181mm
254mm
10
100
63188B
0361 1015 298
238mm
311mm
10
100
B= Bulk H= Pack
58
Diameter Range (mm)
Min
Max
breeze® POWER-SEAL 63 SERIES (Trade Pack)
W4
BREEZE® worm-gear clamps with heavy duty 4-piece Quadra-Lock construction are designed
for use in general-purpose, industrial & automotive applications. Material Grade: 300 Series.
Stainless steel band, screw, saddle and housing. Standard 1/2” (12.7mm) band. 5/16” (7.9mm)
slotted hex head screw. Built to SAE standard J1508 Type “F”. Please note outer pack
quantities will not be split.
Diameter Range (mm)
Min
Max
Breeze®
Part No.
Norma Item
Number
63006B
0361 0084 010
11mm
20mm
500
63008B
0361 0077 013
13mm
23mm
500
63010B
0361 0061 016
14mm
27mm
500
63012B
0361 0017 019
17mm
32mm
800
63016B
0361 0034 025
21mm
38mm
800
63020B
0361 0067 032
21mm
44mm
800
63024B
0361 0065 038
27mm
51mm
600
63028B
0361 0031 044
33mm
57mm
600
63032B
0361 0089 051
40mm
64mm
500
63036B
0361 0085 057
46mm
70mm
500
63040B
0361 0041 064
52mm
76mm
500
63044B
0361 0053 070
59mm
83mm
500
63048B
0361 0073 076
65mm
89mm
400
63052B
0361 0044 083
71mm
95mm
400
63056B
0361 0077 089
78mm
102mm
300
63060B
0361 0045 095
84mm
108mm
300
63064B
0361 0004 102
91mm
114mm
200
63072B
0361 0032 114
48mm
127mm
200
63080B
0361 0029 127
64mm
140mm
200
63088B
0361 0038 140
79mm
152mm
200
63096B
0361 0090 152
92mm
165mm
200
63104B
0361 0048 165
105mm
178mm
200
63128B
0361 1032 203
143mm
216mm
100
63152B
0361 1052 241
181mm
254mm
100
63188B
0361 1015 298
238mm
311mm
100
Carton Qty
B= Bulk H= Pack
59
BREEZE® MERCHANDISERS & KITS
Breeze®
Part No.
BHC140W2
BHC140W4
BHC108W2
BHC108W4
BHC100W2
BHC100W4
60
NORMA Part No.
Contents
0822 0317 006
Wire rack merchandiser containing 140
mini & Powerseal clamps. 50 X mini size
04,06, 90 x Powerseal size 10 thru 36 plus
Flexidriver. SW6/8, all clamps with Stainless
Steel band & housing, carbon screw.
0822 0317 007
Wire rack merchandiser containing 140 mini
& Powerseal clamps 50 x mini size 04,06,90
x Powerseal size 10 thru 36 plus Flexidriver
sw6/8, all clamps 300 Stainless Steel
0822 0317 000
Lastic wall mount merchandiser containing
108 mini & Powerseal clamps 48 x mini
size 04,06,05 lin, 60 x Powerseal size 10
thru 28 plus Flexidriver sw6/8, all clamps
with Stainless Steel band & housing, carbon
screw
0822 0317 003
Plastic wall mount merchandiser containing
108 mini & Powerseal clamps 48 x mini size
04,06, 60 x Powerseal size 10 thru 28 plus
Flexidriver sw6/8, all clamps 300 Stainless
Steel band
0822 0317 004
Grab kit containing 100 mini & Powerseal
clamps 50 x mini size 04,06, 50 x Powerseal
size 10 thru 28 plus Flexidriver SW6/8, all
clamps with Stainless Steel band & housing,
carbon screw
0822 0317 005
Grab kit containing 100 mini & Powerseal
clamps 50 x mini size 04,06, 50 x Powerseal
size 10 thru 28 plus Flexidriver. SW6/8, all
clamps 300 Stainless Steel
Norma Pacific Price List 1st January 2013 - All prices plus GST
Band Width
mm
8.0
8.0
12.0
12.0
12.0
12.0
12.0
Flexidriver
Contents
Part No.
3704
3706
63010
63012
63020
63024
63028
SW6/8
Clip
Clamping Range Hose
Qty
6-16mm
32
8-22mm
16
14-27mm
12
18-32mm
12
21-44mm
12
27-51mm
12
33-57mm
12
6 & 8mm
1
BREEZE® BHC108/W2 Slotted Band Clamp
Merchandiser 0822 0317 000
Band Width
mm
8.0
8.0
8.0
12.0
12.0
12.0
12.0
12.0
Flexidriver
Contents
Part No.
3505L
3504
3506
62010
62012
62020
62024
62028
SW6/8
Clip
Clamping Range Hose
Qty
9-16mm
16
6-16mm
16
8-22mm
16
14-27mm
12
18-32mm
12
21-44mm
12
27-51mm
12
33-57mm
12
6 & 8mm Hex
1
Item No.
BHC108W4
0822 0317 003
BREEZE® BHC108/W4 Stainless Steel Slotted Band Clamp Merchandiser
61
breeze® AERO SEAL® (Packed)
Breeze® Aero Seal® liner clamps are designed with a quadra lock construction which enables
more tightening torque to be delivered to the perforations while maximising vibration resistance.
Manufactured in a 1/2” (12.7mm) band.5/16” Hex and Stainless Steel screw.
Breeze®
Part No.
Norma Item
Number
Pack
Qty
Carton
Qty
9406H
0361 1013 010
11mm
20mm
10
100
9408H
0361 1018 013
13mm
23mm
10
100
9410H
0361 1012 016
14mm
27mm
10
100
9412H
0361 1031 019
17mm
32mm
10
100
9416H
0361 1096 025
21mm
38mm
10
100
9420H
0361 1089 032
21mm
44mm
10
100
9424H
0361 1083 038
27mm
51mm
10
100
9428H
0361 1076 044
33mm
57mm
10
100
9432H
0361 1071 051
40mm
64mm
10
100
9436H
0361 1065 057
46mm
70mm
10
100
9440H
0361 1060 064
52mm
76mm
10
100
9444H
0361 1053 070
59mm
83mm
10
100
9448H
0361 1028 076
65mm
89mm
10
100
9452H
0361 1042 083
71mm
95mm
10
100
9456H
0361 1036 089
78mm
102mm
10
100
9460H
0361 1013 095
84mm
108mm
10
100
9464H
0361 1027 102
91mm
114mm
10
100
9472H
0361 1021 114
48mm
127mm
10
100
9480H
0361 1015 127
64mm
140mm
10
100
9488B
0361 0012 140
79mm
152mm
10
100
9496B
0361 1009 152
92mm
165mm
10
100
94104B
0361 1013 165
105mm 178mm
10
100
B= Bulk H= Pack
62
Diameter Range
(mm)
Min
Max
breeze® MAKE-A-CLAMP
Breeze® Make-A-Clamp is a complete maintenance clamp system in a kit, consisting of a continuous
roll of Stainless Steel banding (which can be cut to the size diameter which is required) and Stainless
Steel adjustable worm-gear assembly fasteners. Standard 1/2” (12.7mm) band. 5/16” (7.9mm)
slotted hex head screw. 9/16” (14.2mm) wide Stainless Steel fastener and screw/housing
assemblies. Please note outer pack quantities will not be split.
Breeze®
Part No.
Norma Item
Number
Contents
4000
0364 0200 100
Mini kit with 8.5ft (2.6mtrs)
band, 3 adjustable fasteners
and 1 band splice
4001
0364 1200 101
Kit containing 100ft (30.5mtrs)
and 10 band splices
4002
0364 0200 102
Kit containing 50ft (15.2mtrs)
and 5 band splices
4003
0364 0200 103
Box of 25 adjustable fasteners
4004
0364 0200 104
Box of 10 adjustable fasteners
4005
0364 1200 105
Box with 100ft (30.5mtrs) band,
10 band splices
4006
0364 0200 106
Box with 50ft (15.2mtrs) band,
5 band splices
63
breeze Hi-TORQUE CLAMP WITH LINER (Packed)
®
W3
BREEZE® Hi-Torque clamp with liner is the original and still the strongest worm-drive clamp
available. Use it where conventional clamps are inadequate or in applications where double
and triple clamping is currently needed. Withstands more than 3 times the SAE torque
requirements for type F worm-gear clamps. Eight screw-threads are engaged in the band
simultaneously for incredible torquing drive (over 150 in.lbs.), sealing pressure and vibration resistance. Standard 5/8” (15.8mm) band. 5/16” (7.9mm) slotted hex head screw. Also
available in 316 Stainless Steel. Built to SAE standard J1508 Type “HD”. Please note outer
pack quantities will not be split.
410 Series Stainless Steel Screw
64
Breeze® Part No.
Norma Item
Number
HTM 175 L
HTM 200 L
Diameter Range (mm)
Min
Max
Pack
Qty
0156 2045 044
25
45
10
0156 3034 051
32
54
10
HTM 250 L
0156 8019 064
45
67
10
HTM 300 L
0156 3004 076
57
79
10
HTM 350 L
0156 7010 089
70
92
10
HTM 400 L
0156 9022 102
83
105
10
HTM 450 L
0156 3036 114
95
118
10
HTM 500 L
0156 8051 127
108
130
10
HTM 550 L
0156 2065 140
121
143
10
HTM 600 L
0156 7080 152
133
156
10
HTM 650 L
0156 7090 165
146
168
10
HTM 700 L
0156 1094 178
159
181
10
HTM 750 L
0156 4081 191
172
194
10
HTM 800 L
0156 5020 203
184
206
10
HTM 850 L
0156 5060 216
197
219
10
HTM 900 L
0156 8047 229
210
232
10
breeze Hi-TORQUE CLAMP WITH LINER (Trade Pack)
®
W3
BREEZE® Hi-Torque clamp with liner is the original and still the strongest worm-drive clamp
available. Use it where conventional clamps are inadequate or in applications where double
and triple clamping is currently needed. Withstands more than 3 times the SAE torque
requirements for type F worm-gear clamps. Eight screw-threads are engaged in the band
simultaneously for incredible torquing drive (over 150 in.lbs.), sealing pressure and vibration resistance. Standard 5/8” (15.8mm) band. 5/16” (7.9mm) slotted hex head screw. Also
available in 316 Stainless Steel. Built to SAE standard J1508 Type “HD”. Please note outer
pack quantities will not be split.
410 Series Stainless Steel Screw
Breeze® Part No.
Norma Item
Number
HTM 175 L B
HTM 200 L B
Diameter Range (mm)
Min
Max
Carton
Qty
0156 3044 044
25mm
45mm
200
0156 4033 051
32mm
54mm
400
HTM 250 L B
0156 0017 064
45mm
67mm
300
HTM 300 L B
0156 6001 076
57mm
79mm
300
HTM 350 L B
0156 9012 089
70mm
92mm
200
HTM 400 L B
0156 2024 102
83mm
105mm
200
HTM 450 L B
0156 5038 114
95mm
118mm
150
HTM 500 L B
0156 0053 127
108mm
130mm
125
HTM 550 L B
0156 4067 140
121mm
143mm
125
HTM 600 L B
0156 9082 152
133mm
156mm
130
HTM 650 L B
0156 9092 165
146mm
168mm
100
HTM 700 L B
0156 3092 178
159mm
181mm
100
HTM 750 L B
0156 5080 191
172mm
194mm
100
HTM 800 L B
0156 7068 203
184mm
206mm
100
HTM 850 L B
0156 6059 216
197mm
219mm
75
HTM 900 L B
0156 0045 229
210mm
232mm
75
65
breeze® Constant-TORQUE
BREEZE® Constant Torque® is a breakthrough in clamping technology. A belleville spring mechanism permits the Constant Torque® clamp to automatically increase or decrease its own diameter
due to changes in operational or environmental temperature. Built to SAE standard J1508 Type
“SLHD”. Please note outer pack quantities will not be split.
Heavy Duty Constant-Torque Clamps With Liner - PACKED - All Stainless Steel
Breeze® Part No.
CT 200 LSS
CT 250 LSS
CT 300 LSS
CT 350 LSS
CT 400 LSS
CT 450 LSS
CT 500 LSS
CT 550 LSS
CT 600 LSS
CT 650 LSS
CT 700 LSS
CT 750 LSS
CT 800 LSS
CT 850 LSS
CT 900 LSS
Norma Item
Number
0156 1124 051
0156 1132 064
0156 1146 076
0156 1160 089
0156 1175 102
0156 1187 114
0156 1109 127
0156 1105 140
0156 1101 152
0156 1108 165
0156 1100 178
0156 1100 191
0156 1100 203
0156 1100 216
0156 1100 229
Diameter Range
(mm)
Min
Max
32mm
45mm
57mm
70mm
83mm
95mm
108mm
121mm
133mm
146mm
159mm
172mm
184mm
197mm
210mm
54mm
67mm
79mm
92mm
105mm
118mm
130mm
143mm
156mm
168mm
181mm
194mm
206mm
219mm
232mm
Pack Qty
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Heavy Duty Constant-Torque Clamps With Liner - Trade Pack - All Stainless Steel
Breeze® Part No.
66
Norma Item
Number
Diameter Range (mm)
Min
Max
Carton
QTY
CT 200 LSS B
0156 0125 051
32mm
54mm
250
CT 250 LSS B
0156 0133 064
45mm
67mm
100
CT 300 LSS B
0156 0147 076
57mm
79mm
150
CT 350 LSS B
0156 0161 089
70mm
92mm
150
CT 400 LSS B
0156 0176 102
83mm
105mm
150
CT 450 LSS B
0156 0188 114
95mm
118mm
150
CT 500 LSS B
0156 0200 127
108mm
130mm
125
CT 550 LSS B
0156 0106 140
121mm
143mm
100
CT 600 LSS B
0156 0102 152
133mm
156mm
100
CT 650 LSS B
0156 0109 165
146mm
168mm
75
CT 700 LSS B
0156 0103 178
159mm
181mm
75
CT 750 LSSB
0156 0100 191
172mm
194mm
75
CT 800 LSS B
0156 0100 203
184mm
206mm
75
CT 850 LSS B
0156 0100 216
197mm
219mm
75
CT 900 LSS B
0156 0100 229
210mm
232mm
50
breeze® V-BAND CLAMPS
Breeze® V-Band clamps are mechanical connecting clamps, featuring V-insert sections welded
inside a strong and adjustable clamp. The V-Band clamp (when tightened) exerts a radial force
to connect, seal and/or hold together flanged connection components in pumps, engines, turbo
chargers or filters. Please note outer pack quantities will not be split.
All Stainless Steel
Diameter Range
Nominal
Nominal mm
Inch
Breeze®
Part No.
Norma Item
Number
Carton
QTY
VT 10288
0365 1600 724
2.88
73.15
5
VT 10321
0365 1680 815
3.21
81.53
5
VT 10350
0365 1680 889
3.50
88.90
5
VT 10382
0365 1680 970
3.82
97.03
5
VT 10388
0365 1680 986
3.88
98.55
5
VT 10406
0365 1681 031
4.06
103.12
5
VT 10413
0365 1681 049
4.13
104.90
5
VT 10419
0365 1681 064
4.19
106.43
5
VT 10425
0365 1681 080
4.25
107.95
5
VT 10450-A
0365 1681 143
4.50
114.30
5
VT 10450
0365 1601 143
4.50
114.30
5
VT 10461
0365 1681 171
4.61
117.09
5
VT 10469
0365 1681 191
4.69
119.13
5
VT 10475
0365 1681 207
4.75
120.65
5
VT 10475-A
0365 1691 207
4.75
120.65
5
VT 10481
0365 1681 222
4.81
122.17
5
VT 10491
0365 1681 247
4.91
124.71
5
VT 10494
0365 1601 255
4.94
125.48
5
VT 10510
0365 1681 295
5.10
129.54
5
VT 10525
0365 1681 335
5.25
133.35
5
VT 10530
0365 1681 346
5.30
134.62
5
VT 10565
0365 1681435
5.65
143.51
5
VT 10581
0365 1681 476
5.81
147.57
5
VT 10588
0365 1681 494
5.88
149.35
5
VT 10588-1
0365 1601 494
5.88
149.35
5
VT 10592
0365 1681 504
5.92
150.37
5
VT 10688
0365 1681 748
6.88
174.75
5
VT 10808
0365 1682 052
8.08
205.23
5
67
breeze® T-BOLT CLAMPS (Trade Packs)
Breeze® T-Bolt clamps are performance engineered for long term durability and manufactured
to the highest quality standards. This high strength clamp is designed for industrial, marine and
vehicle applications. Please note outer pack quantities will not be split.
Stainless Steel 3/4” (19mm) Bandwidth with floating bridge liner.
Plated bolt and nylon insert lock nut.
68
Breeze®
Part No.
9222-125B
9222-138B
9222-150B
9222-163B
9222-175B
9222-188B
9222-200B
9222-213B
9222-225B
9222-238B
9222-250B
9222-263B
9222-275B
9222-288B
9222-300B
9222-313B
9222-325B
9222-338B
9222-350B
9222-363B
9222-375B
9222-400B
9222-413B
9222-425B
9222-450B
9222-475B
9222-500B
9222-525B
9222-550B
9222-575B
9222-600B
9222-625B
9222-638B
9222-650B
9222-675B
9222-700B
9222-725B
9222-750B
9222-775B
9222-800B
9222-825B
9222-850B
9222-1050
Norma Item
Number
0363 2005 044
0363 2003 048
0363 2000 051
0363 2003 054
0363 2000 057
0363 3000 060
0363 3000 064
0363 1006 067
0363 1007 070
0363 1006 073
0363 1007 076
0363 1009 080
0363 1100 083
0363 1006 086
0363 1008 089
0363 1004 092
0363 1006 095
0363 1007 102
0363 1006 105
0363 2000 108
0363 1008 114
0363 1006 121
0360 1008 127
0363 1007 133
0363 1008 140
0363 1006 146
0363 1006 152
0363 1007 159
0363 1006 162
0363 1005 165
0363 1005 171
0363 1004 178
0363 1005 184
0363 1005 191
0363 1004 197
0363 1004 216
0363 0004 267
Diameter Range
Min. mm Max. mm
31.80
35.70
34.90
39.70
38.10
42.90
41.30
47.60
44.50
50.80
47.60
55.60
50.80
58.70
54.00
61.90
57.20
65.10
60.30
68.30
63.50
71.40
66.70
74.60
66.90
77.80
73.00
81.00
76.20
84.10
79.40
87.30
82.60
90.50
85.70
93.70
88.90
96.80
92.10
100.00
95.30
103.20
101.60
109.50
104.80
112.70
108.00
115.90
114.30
122.20
120.70
128.60
127.00
134.90
133.40
141.30
139.70
147.60
146.10
154.00
152.40
160.30
158.80
166.70
162.00
170.00
165.10
173.00
171.50
179.40
177.80
185.70
184.20
192.10
190.50
198.40
196.90
204.80
203.20
211.10
209.60
217.50
215.90
223.80
267.00
274.50
Carton
Qty
200
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
75
75
75
75
75
50
50
50
50
50
50
50
50
50
breeze® T-BOLT CLAMPS (Packed)
Breeze® T-Bolt clamps are performance engineered for long term durability and manufactured
to the highest quality standards. This high strength clamp is designed for industrial, marine and
vehicle applications. Please note outer pack quantities will not be split.
Stainless Steel 3/4” (19mm) Bandwidth with floating bridge liner. Plated bolt and
nylon insert lock nut.
Breeze®
Part No.
Diameter Range
Norma Item
Number
Min. mm
Max. mm
Pack
Qty
TB 225B
0363 0017 061
57.20
65.10
10
TB 250B
0363 0017 068
63.50
71.40
10
TB 275B
0363 0017 074
66.90
77.80
10
TB 300B
0363 0017 080
76.20
84.10
10
TB 325B
0363 0017 087
82.60
90.50
10
TB 350B
0363 0017 093
88.90
96.80
10
TB 375B
0363 0017 099
95.30
103.20
10
TB 400B
0363 0017 106
101.60
109.50
10
69
breeze® T-BOLT CLAMPS Spring Loaded Heavy Duty (Trade Packs)
Breeze® T-Bolt clamps are reliable, heavy duty method of assembling hose ducting connections
and tubing. Breeze Standard T-Bolt Clamps are available with plated carbon steel bolt or in 100%
Stainless Steel.. This high strength clamp is designed for industrial, marine and vehicle applications.
Stainless Steel 3/4” (19mm) Bandwidth with floating bridge liner. Plated
bolt and nylon insert lock nut.
Breeze®
Part No.
Min. mm
Max. mm
Carton
Qty
B9224-0213 B
0363 1100 054
54.00
61.90
125
B9224-0225 B
0363 1100 056
57.20
65.10
100
B9224-0238 B
0363 1100 060
60.30
68.30
200
B9224-0250 B
0363 1100 064
63.50
71.40
100
B9224-0263 B
0363 1100 067
66.70
74.60
100
B9224-0269 B
0363 1104 068
68.30
76.20
100
B9224-0275 B
0363 1100 070
66.90
77.80
100
73.00
81.00
100
B9224-0288 B
B9224-0300 B
0363 1100 076
76.20
84.10
100
B9224-0306 B
0363 1104 078
77.80
85.70
100
B9224-0313 B
0363 1103 080
79.40
87.30
100
82.60
90.50
100
B9224-0325 B
70
Diameter Range
Norma Item
Number
B9224-0338 B
0363 1103 086
85.70
93.70
100
B9224-0356 B
0363 1103 090
90.50
98.40
100
B9224-0363 B
0363 1100 092
92.10
100.00
100
B9224-0375 B
0363 1100 095
95.30
103.20
100
B9224-0388 B
0363 1100 099
99.00
107.00
100
B9224-0406 B
0363 1100 103
103.20
111.10
100
B9224-0413 B
0363 1100 105
104.80
112.70
75
B9224-0425 B
0363 1104 108
108.00
115.90
75
B9224-0450 B
0363 1100 114
114.30
122.20
75
B9224-0456 B
0363 1100 116
115.90
123.80
75
B9224-0500 B
0363 1100 127
127.00
134.90
75
B9224-0525 B
133.40
141.30
75
B9224-0550 B
139.70
147.60
75
B9224-0575 B
146.10
154.00
75
B9224-0625 B
158.80
166.70
75
B9224-0650 B
165.10
173.00
75
B9224-0700 B
177.80
185.70
50
B9224-0725 B
0363 1100 184
184.20
192.10
50
B9224-0750 B
0363 1100 191
190.50
198.40
50
breeze® T-BOLT CLAMPS Spring Loaded Heavy Duty (Packed)
Breeze® T-Bolt clamps are reliable, heavy duty method of assembling hose ducting connections
and tubing. Breeze Standard T-Bolt Clamps are available with plated carbon steel bolt or in 100%
Stainless Steel.. This high strength clamp is designed for industrial, marine and vehicle applications.
Stainless Steel 3/4” (19mm) Bandwidth with floating bridge liner.
Plated bolt and nylon insert lock nut.
Breeze®
Part No.
Diameter Range
Norma Item
Number
Min. mm
Max. mm
Pack
Qty
B9224-0225
0822 0363 056
57.20
65.10
10
B9224-0263
0822 0363 067
66.70
74.60
10
B9224-0306
0822 0363 078
77.80
85.70
10
B9224-0356
0822 0363 090
90.50
98.40
10
B9224-0375
0822 0363 095
95.30
103.20
10
B9224-0406
0822 0363 103
103.20
111.10
10
B9224-0425
0822 0363 108
108.00
115.90
10
B9224-0456
0822 0363 116
115.90
123.80
10
71
72
exhaust products
Torca® is the brand, when it comes to connecting heavy duty
exhaust. With more than 30 years manufacturing experience,
Torca® clamps provide simple and effective exhaust components.
The patented Reaction Block design makes for fast, accurate
installation, saving time and money.
Torca® is produced with the highest quality material in the U.S.A.
Beware of imitations - remember If it doesn’t have a Reaction
Block it’s not a Torca®!
Made in usa
73
torca® torctite™ exhaust products
TORCA® TorcTite™ Butt Joint Clamps are the simple, effective way to connect exhaust system
components. Replaces U-bolts and clamps. Exclusive design makes for fast, easy and accurate
installation. Compatible with pipes, flex & mufflers. Post cat exhaust butt joint clamps for
commercial,earthmoving and agricultural.
Aluminised Steel pre-form clamps box
Diameter
Size
Torca® Part No.
Item Part No.
Pack
QTY
2.0”
B20AB
0368 1103 051
10
2.25”
B22AB
0368 1100 056
10
2.5”
B25AB
0368 1103 064
10
2.75”
B27AB
0368 1102 069
10
3.0”
B30AB
0368 1107 076
10
3.5”
B35AB
0368 1106 089
10
4.0”
B40AB
0368 1105 102
10
4.5”
B45AB
0368 0303 114
10
5.0”
B50AB
0368 1105 127
10
6.0”
B60AB
0368 1102 152
10
W1
304 Stainless Steel pre-form clamps
Diameter
Size
Torca® Part No.
Item Part No.
Pack
QTY
2.0”
B20SB
0368 1106 051
10
2.25”
B22SB
-
10
2.5”
B25SB
-
10
2.75”
B27SB
-
10
3.0”
B30SB
-
10
3.5”
B35SB
0368 1101 089
10
4.0”
B40SB
-
10
4.5”
B45SB
-
10
5.0”
B50SB
0368 1102 127
10
6.0”
B60SB
0368 1106 152
10
Replacement Hardware Kit
74
Diameter
Size
Torca® Part No.
Item Part No.
Pack
QTY
-
TTBAGB
0368 0100 000
10
W4
torca® torctite™ exhaust products
TORCA® TorcTite™ Lap Joint Clamps are the simple, effective way to connect exhaust system
components. Replaces U-bolts and clamps. Exclusive design makes for fast, easy and accurate installation. Compatible with pipes, flex & mufflers. Post cat exhaust lap joint clamps for
commercial,earthmoving and agricultural.
• Specific OEM & Service designs • Unique sealing performance
• Superior clamp load capability • Pre-assembled, easy installation
• Compatible with pipes, flex, mufflers • Durable installation without damage to pipe ends
Aluminised Steel pre-form clamps
Diameter
Size
Torca® Part No.
Item Part No.
Pack
QTY
20.0”
L20AB
0368 0101 151
10
2.25”
L22AB
0368 0102 056
10
2.5”
L25AB
0368 0109 064
10
2.75”
L27AB
0368 0102 069
10
3.0”
L30AB
0368 0113 076
10
3.5”
L35AB
0368 0108 089
10
4.0”
L40AB
0368 0103 102
10
4.5”
L45AB
0368 0106 114
10
5.0”
L50AB
0368 0127 127
10
6.0”
L60AB
0368 0106 152
10
W1
304 Stainless Steel pre-form clamps
Diameter
Size
Torca® Part No.
Item Part No.
Pack
QTY
2.0”
L20SB
0368 0105 051
10
2.25”
L22SB
0368 0102 057
10
2.5”
L25SB
0368 0104 064
10
2.75”
L27SB
0368 0100 070
10
3.0”
L30SB
0368 0100 076
10
3.5”
L35SB
0368 0101 089
10
4.0”
L40SB
0368 0117 102
10
4.5”
L45SB
0368 0103 114
10
5.0”
L50SB
0368 0110 127
10
6.0”
L60SB
0368 0112 152
10
W4
75
TORCA® easyseal™ EXHAUST PRODUCTS
EasySeal™ Flatband Clamps - Stainless Steel (304) Flatband
exhaust joint clamps, individual skin packed.
• Ideal, service specific design • Flat, packaged, easy to store
• Easy, fast, accurate installation • Unique sealing performance
• Durable installation without damage to pipe ends
• Standard industry sizes from 2”- 6”
• Available in Aluminized Steel or bright finish 304 Stainless Steel
76
Diameter
Size
Torca® Part No.
Item Part No.
Pack
QTY
2.0”
E20ST
0368 2000 051
10
2.25”
E22ST
0368 2000 256
10
2.5”
E25ST
0368 2000 064
10
2.75”
E27ST
0368 2000 069
10
3.0”
E30ST
0368 2000 076
10
3.5”
E35ST
0368 2000 089
10
4.0”
E40ST
0368 2000 102
10
4.5”
E45ST
0368 2000 114
10
5.0”
E50ST
0368 2000 127
10
6.0”
E60ST
0368 2000 152
10
7.0"
E70ST
0368 2000 178
10
8.0"
E80ST
0368 2000 203
10
W4
TORCA® UNISTRAP™ EXHAUST PRODUCTS
TORCA® universal bracket for mounting of system and or shields and hardware packaging: clamp is
fully assembled, hardware is coated with clear trivalent plating.
• Unitary clamp/bracket system
• Application specific designs, sizes
• Reduce part number complexity
• Increases assembly ease and reliability
• Eliminates welds, corrosion, failures
• More strength, less materials
Unistrap Bracket Clamps
Diameter
Size
Torca® Part No.
Item Part No.
Pack
QTY
4.0" 103mm
20-0575
0369 0001 031
10
5.0" 128mm
20-0576
0369 0001 285
10
6.0" 154mm
20-0577
0369 0001 540
10
8.0" 205mm
Y080DA
0369 0022 043
10
8.0" 205mm
20-0578
0369 0002 050
10
8.5" 216mm
20-0579
0369 0002 160
10
9.0" 230mm
20-0580
0369 0012 301
10
10.25" 256mm
20-0581
0369 0442 540
10
77
TORCA® accuseal™ EXHAUST PRODUCTS
AccuSeal™ Stainless Steel Steel Narrow Band Clamps. Exhaust Joint Clamp for
pipes, mufflers and converters. Unique seal and high clamp loads are provided
without permanent distortion to exhaust members.
• Provides joint serviceability
• Unique sealing performance
• Superior clamp load capability
• Pre-assembled – easy installation
• Designed for part-in-assembly attachment
• Durable installation without damage to pipe ends
78
Diameter
Size
Torca®
Part No.
Item Part No.
Pack
QTY
1.75”
A17SF
-
50 pieces
1.88”
A19SF
-
50 pieces
2.0”
A20SF
0366 0060 564
50 pieces
2.25”
A22SF
-
50 pieces
2.5”
A25SF
0366 1050 691
50 pieces
2.75”
A27SF
0366 0070 754
50 pieces
3.0”
A30SF
0366 0030 818
50 pieces
3.5”
A35SF
0366 0000 949
50 pieces
4.0”
A40SF
0366 2001 072
50 pieces
4.5”
A45SF
-
50 pieces
5.0”
A50SF
0366 1041 326
50 pieces
6.0”
A60SF
0366 0061 580
25 pieces
TORCA® accuseal™ EXHAUST PRODUCTS
AccuSeal™ Aluminsed Narrow Band Clamps. Exhaust Joint Clamp for pipes, mufflers
and converters. Unique seal and high clamp loads are provided without permanent
distortion to exhaust members.
Diameter
Size
Torca® Part No.
Item Part No.
Pack
QTY
1.75”
A17AF
0366 0070 500
50 pieces
1.88”
A19AF
0366 0030 532
50 pieces
2.0”
A20AF
0366 1020 564
50 pieces
2.25”
A22AF
0366 0030 627
50 pieces
2.5”
A25AF
0366 0060 691
50 pieces
2.75”
A27AF
0366 0020 754
50 pieces
3.0”
A30AF
0366 0070 818
50 pieces
3.5”
A35AF
0366 0060 949
50 pieces
4.0”
A40AF
0366 0081 072
50 pieces
4.5”
A45AF
0366 0021 199
50 pieces
5.0”
A50AF
0366 0071 326
50 pieces
6.0”
A60AF
0366 0041 580
25 pieces
TORCA® coupler™ EXHAUST PRODUCTS
• Provides joint serviceability
• Does not require pipe overlap
• Pre-assembled – easy installation
• Unique sealing performance
• Superior clamp load capability
79
80
exhaust
products
81
r.g ray® HEAVY DUTY T-BOLT & FLEX SEAL™ HOSE CLAMPS
r.g ray® T-bolt Hose Clamps are intended for use where other hose clamps do not work. Typical
application include air intake systems, cold side charge air hose connections and a variety of
hose, pipe and ducting joints. Available in diameters 1.75 inch and larger, T-bolt Hose Clamps
can be configured to suit almost any application and operating environment. FLEX SEAL™ Hose
Clamps incorporate a compression spring to accommodate joint diameter changes resulting
from hose set and thermal effects. They are accepted industry wide for use on charge air and
coolant system hose connections. Heavy Duty T-bolt and FLEX SEAL™ Hose Clamps usually
have a diameter take up range of 5/16 inch. Many sizes are in stock available for quick delivery.
2226 - mini FLEX SEAL™ Hose Clamp: 9/16 inch wide Stainless Steel band with plated steel
bridge, M5 T-bolt and hardware
rg ray® 2226 - mini FLEX SEAL™ Hose Clamp
DESCRIPTION
CT T-BOLT MINI
CT T-BOLT MINI
CT T-BOLT MINI
CT T-BOLT MINI
CT T-BOLT MINI
CT T-BOLT MINI
Norma® Item
Number
374 0301 049
374 0301 056
374 0301 061
374 0301 064
374 0301 066
374 0301 069
RG RAY®
Part No.
002226-029
002226-033
002226-036
002226-038
002226-039
002226-041
Diameter Range
(INCHES)
1.81"- 2.06
2.06”- 2.37”
2.25”- 2.56”
2.38”- 2.69”
2.44”- 2.75”
2.56”- 2.87
Pack
Qty
10
10
10
10
10
10
848 - Series FLEX SEAL™ Hose Clamp (SAE Type SLTB): 3/4 inch wide Stainless Steel
band with floating bridge, 1/4 inch plated steel T-bolt and hardware, includes special long travel
spring to accommodate larger changes in joint diameter Also available: different materials and
Quick Connect or Quick Release latch styles
rg ray® 848 - Series FLEX SEAL™ Hose Clamp (SAE Type SLTB)
DESCRIPTION
FLEX SEAL CLAMP H/D
FLEX SEAL CLAMP H/D
FLEX SEAL CLAMP H/D
FLEX SEAL CLAMP H/D
FLEX SEAL CLAMP H/D
FLEX SEAL CLAMP H/D
FLEX SEAL CLAMP H/D
FLEX SEAL CLAMP H/D
FLEX SEAL CLAMP H/D
FLEX SEAL CLAMP H/D
82
Norma® Item
Number
374 0501 075
374 0501 083
374 0501 096
374 0501 102
374 0501 118
374 0501 122
374 0501 134
374 0502 061
374 0502 072
374 0502 109
RG RAY®
Part No.
000848-045
000848-050
000848-058
000848-062
000848-072
000848-074
000848-082
000848-036
000848-043
000848-066
Diameter Range
(INCHES)
2.81” - 3.12”
3.12” - 3.43”
3.50”-3.81”
3.88”-4.19”
4.50”-4.81”
2.56”- 2.87
4.63’-4.94”
5.12”-5.43”
2.69”-3.00”
4.12’-4.43”
Pack
Qty
10
10
10
10
10
10
10
10
10
10
rg ray® 700 - Series T-bolt Hose Clamp (SAE Type TB) 3/4 inch wide Stainless Steel band with
floating bridge, 1/4 inch plated steel T-bolt and hardware.
rg ray® 700 - Series T-bolt Hose Clamp (SAE Type TB)
DESCRIPTION
Norma® Item
Number
RG RAY®
Part No.
Diameter Range Pack
(INCHES)
Qty
T-BOLT W2
374 0201 101
000700-061
3.81"-4.12"
10
T-BOLT W2
374 0201 113
000700-069
4.31"-4.62"
10
T-BOLT W2
374 0201 126
000700-077
4.81"-5.12"
10
T-BOLT W2
374 0201 139
000700-085
5.31"-5.62"
10
T-BOLT W2
374 0201 152
000700-093
5.81"-6.12"
10
T-BOLT W2
374 0201 156
000700-096
6.00"- 6.31"
10
T-BOLT W2
374 0201 164
000700-101
7.50"-7.81"
10
T-BOLT W2
374 0201 195
0738-120
7.56"-7.87"
10
T-BOLT W2
374 0201 196
000700-121
8.69"-9.00"
10
T-BOLT W2
374 0201 225
000700-139
10.36"- 11.13"
10
T-BOLT W2
374 0201 276
000700-170
10.36"- 11.13"
10
T-BOLT W2
374 0202 088
000700-053
3.31"-3.62"
10
T-BOLT W2
374 0202 116
000738-071
4.44"- 4.75"
10
3/4 inch wide Stainless Steel band with floating bridge, 1/4 inch plated steel T-bolt and hardware.
DESCRIPTION
Norma® Item
Number
RG RAY®
Part No.
238IN. S/S T/B HOSE CLAMP
374 0202 060
000853-035
2.19”-2.50”
10
374 0202 069
000853-041
2.56”-2.87”
10
374 0202 082
000853-049
3.06”-3.37”
10
374 0203 055
000853-033
2.06”-2.31”
10
374 0203 072
000853-043
2.69”-3.00”
10
374 0204 088
000853-053
3.31”-3.62”
10
374 0204 113
000853-069
4.31”-4.62”
10
Diameter Range Pack
(INCHES)
Qty
83
rg ray® HEAVY DUTY V-CLAMPS - General Purpose
V-Clamps can be used to hold together virtually any flanged joint. Common applications range
from light to heavy duty and include diesel engines, turbochargers, pumps, filter vessels, tubing
and countless other flanged items. V-Clamps are produced in a wide range of materials based
upon application requirements. Typical material is 300 series Stainless Steel, but plated carbon
steel or speciality materials, such as, A286, Inconel and others are not uncommon.
V-Clamps are currently available in over fifty different type and fastener configurations. Sizes
range from .75 inch to 72 inch diameter. Many V-retainer profiles are already tooled; one may
be suitable for your application.
rg ray® General Purpose V-Insert Clamp
Features: V-inserts welded to a flexible outer band
Materials: Corrosion resistant and specialty steels
Fasteners: #10, 1/4”, 5/16”, 3/8” or metric equivalents Sizes: 2” and larger diameters
Options: Two tightening points (180° apart) Applications: Pumps, diesel engines, EGR
systems, truck exhaust connections, turbochargers, and other flanged joints
rg ray® General Purpose V-Insert Clamp
84
DESCRIPTION
Norma® Item
Number
RG RAY®
Part No.
Diameter Range Pack
(INCHES)
Qty
G/P V-INSERT CLAMP
373 0101 092
10640
3.64”
1
G/P V-INSERT CLAMP
373 0101 099
010028-001
3.88”
1
G/P V-INSERT CLAMP
373 0101 121
010028-006
4”
1
G/P V-INSERT CLAMP
373 0101 149
010028-003
5.88”
1
G/P V-INSERT CLAMP
373 0102 108
010028-002
4.25”
1
G/P V-INSERT CLAMP
373 0102 117
010640-002
4.6”
1
G/P V-INSERT CLAMP
373 0103 133
10134
5.25”
1
G/P V-INSERT CLAMP
373 0104 097
100020-001
3
1
rg ray® Quick Connect V-Insert Clamp
V-Clamps can be used to hold together virtually any flanged joint. Common applications range
from light to heavy duty and include diesel engines, turbochargers, pumps, filter vessels, tubing
and countless other flanged items. V-Clamps are produced in a wide range of materials based
upon application requirements. Typical material is 300 series Stainless Steel, but plated carbon
steel or specialty materials, such as, A286, Inconel and others are not uncommon.
V-Clamps are currently available in over fifty different type and fastener configurations. Sizes
range from .75 inch to 72 inch diameter. Many V-retainer profiles are already tooled; one may
be suitable for your application.
Features: V-inserts welded to a flexible outer band, latch allows the clamp to be installed
quickly without removing the nut
Materials: Corrosion resistant and speciality steels Fasteners: 1/4” and 5/16” or metric
equivalents Sizes: 2” and larger diameters Options: Two tightening points (180° apart)
Applications: Auto exhaust systems, filters, food processing systems and ducting connections
rg ray® QUICK CONNECT V-Insert Clamp
DESCRIPTION
Norma® Item
Number
RG RAY®
Part No.
Q/C V-INSERT
373 0201 083
50158
1
Q/C V-INSERT
373 0201 127
050158-002
1
Diameter Range Pack
(INCHES)
Qty
85
normafix®
87
NORMAFIX® RSGU Pipe Retaining Clip
NormaFix® RSGU Pipe Retaining Clips are suitable for securing pipes, cables, cable harness, cable
ducts, hose and other flow lines.
They are used in almost all sectors of industry, including the automotive industry, mechanical and
application engineering, hydraulics and pneumatics, measurement and control engineering, chemical and
shipbuilding and also electrical and food processing industries.
The NormaFix® RSGU Clips are available in various band widths and screw hole sizes. NormaFix®
RSGU Clips are manufactured in W1 Zinc Plated or All Stainless Steel.
The form-fitting and adaptable band is reinforced at the ends. Where there is high mechanical load
as can occur for example with pressurized lines, this design feature prevents any tearing or loosening
in the clamping area. Larger sizes available upon request, all Stainless Steel W5 grade are also
available.
88
NORMAFIX® RSGU
NORMAFIX® RSGU 2
NORMAFIX® RLGU
NORMAFIX® HMK
NORMAFIX® K
NORMAFIX® BSL
NORMAFIX® DIN STD
NORMAFIX® BSN
NORMAFIX® BSS
NORMAFIX® RLGU Pipe Retaining Clip W1 (Trade Packs)
W1
NormaFix® RLGU Pipe Retaining Clips are suitable for securing pipes, cables, cable harness, cable
ducts, hose and other flow lines. The NormaFix® RLGU Clips are available in various band widths
and screw hole sizes.
Band
Width
Clamping
Range
Part No.
W1 Clamps
Item No.
Pack
QTY
12.0
3.0mm
RLGU1-3/12-0
0945 7112 003
100
12.0
5.0mm
RLGU1-5/12-1
0945 7112 005
100
12.0
6.0mm
RLGU1-6/12-1
0945 7112 006
100
12.0
9.0mm
RLGU1-9/12-1
0945 7112 009
100
12.0
10.0mm
RLGU1-10/12-1
0945 7112 010
100
12.0
11.0mm
RLGU1-11/12-1
0945 7112 011
100
12.0
12.0mm
RLGU1-12/12-1
0945 7112 012
100
12.0
13.0mm
RLGU1-13/12-1
0945 7112 013
100
12.0
14.0mm
RLGU1-14/12-1
0945 7112 014
100
12.0
15.0mm
RLGU1-15/12-1
0945 7112 015
100
12.0
16.0mm
RLGU1-16/12-1
0945 7112 016
100
12.0
17.0mm
RLGU1-17/12-1
0945 7112 017
100
12.0
18.0mm
RLGU1-18/12-1
0945 7112 018
100
12.0
19.0mm
RLGU1-19/12-1
0945 7112 019
100
12.0
20.0mm
RLGU1-20/12-1
0945 7112 020
100
12.0
21.0mm
RLGU1-21/12-1
0945 7112 021
100
12.0
22.0mm
RLGU1-22/12-1
0945 7112 022
100
12.0
25.0mm
RLGU1-25/12-1
0945 7112 025
100
12.0
27.0mm
RLGU1-27/12-1
0945 7112 027
100
12.0
29.0mm
RLGU1-29/12-1
0945 7112 029
100
12.0
32.0mm
RLGU1-32/12-1
0945 7112 032
100
12.0
35.0mm
RLGU1-35/12-1
0945 7112 035
100
12.0
38.0mm
RLGU1-38/12-1
0945 7112 038
100
12.0
40.0mm
RLGU1-40/12-1
0945 7112 040
100
12.0
45.0mm
RLGU1-45/12-1
0945 7112 045
100
12.0
51.0mm
RLGU1-51/12-1
0945 7112 051
100
12mm
Bandwidth
EPDM
Profile
6mm
89
W1
NORMAFIX® RSGU Pipe Retaining Clip W1 (Packed)
NormaFix® RSGU Pipe Retaining Clips are suitable for securing pipes, cables, cable
harness, cable ducts, hose and other flow lines. The NormaFix® RSGU Clips are
available in various band widths and screw hole sizes. Norma Fix RSGU Clips are
manufactured in W1 Zinc Plated or All Stainless Steel. Larger sizes available upon
request, all Stainless Steel W5 grade are also available
NORMAFIX® Pipe Retaining Clip Material Grade W1 - bandwidth 15mm
90
Band
Width
Clamping
Range
Part No.
W1 Clamps
Item No.
Pack
QTY
15.0
4.0mm
RSGU1-4/15-1
0941 5000 004
10
15.0
6.0mm
RSGU1-6/15-1
0941 5000 006
10
15.0
9.0mm
RSGU1-9/15-1
0941 5000 009
10
15.0
10.0mm
RSGU1-10/15-1 0941 5000 010
10
15.0
12.0mm
RSGU1-12/15-1 0941 5001 012
10
15.0
13.0mm
RSGU1-13/15-1 0941 5000 013
10
15.0
15.0mm
RSGU1-15/15-1 0941 5000 015
10
15.0
16.0mm
RSGU1-16/15-1 0941 5001 016
10
15.0
18.0mm
RSGU1-18/15-1 0941 5001 018
10
15.0
19.0mm
RSGU1-19/15-1 0941 5000 019
10
15.0
20.0mm
RSGU1-20/15-1 0941 5001 020
10
15.0
22.0mm
RSGU1-22/15-1 0941 5001 022
10
15.0
25.0mm
RSGU1-25/15-1 0941 5000 025
10
15.0
27.0mm
RSGU1-27/15-1 0941 5000 027
10
15.0
29.0mm
RSGU1-29/15-1 0941 5000 029
10
15.0
32.0mm
RSGU1-32/15-1 0941 5000 032
10
15.0
35.0mm
RSGU1-35/15-1 0941 5000 035
10
15.0
38.0mm
RSGU1-38/15-1 0941 5000 038
10
15.0
40.0mm
RSGU1-40/15-1 0941 5000 040
10
15.0
45.0mm
RSGU1-45/15-1 0941 5000 045
5
15.0
48.0mm
RSGU1-48/15-1 0941 5000 048
5
15.0
50.0mm
RSGU1-50/15-1 0941 5000 050
5
15.0
54.0mm
RSGU1-54/15-1 0941 5000 054
5
20.0
57.0mm
RSGU1-57/20-1 0941 5000 057
5
20.0
60.0mm
RSGU1-60/20-1 0941 5000 060
5
20.0
64.0mm
RSGU1-64/20-1 0941 5000 064
5
20.0
66.0mm
RSGU1-66/20-1 0941 5000 066
5
20.0
76.0mm
RSGU1-76/20-1 0941 5000 076
5
15mm
Bandwidth
EPDM
Profile
6mm
20mm
Bandwidth
EPDM
Profile
8mm
W1
NORMAFIX® Heavy Duty Pipe Retaining Clips
NormaFix® RSGU Pipe Retaining Clips are suitable for securing pipes, cables, cable harness,
cable ducts, hose and other flow lines. The NormaFix® RSGU Clips are available in various
band widths and screw hole sizes.
NORMAFIX® Pipe Retaining Clip Material Grade W1 - bandwidth 20mm
Band
Width
Clamping
Range
Part No.
Mounting
Hole
W1 Clamps
Item No.
Carton
Qty
20.0
15.0mm
RSGU1-15/20-1
8.0mm
0941 6920 015
500
20.0
20.0mm
RSGU1-20/20-1
8.0mm
0941 6920 020
500
20.0
22.0mm
RSGU1-22/20-1
8.0mm
0941 6920 022
500
20.0
25.0mm
RSGU1-25/20-1
8.0mm
0941 6920 025
250
20.0
30.0mm
RSGU1-30/20-1
8.0mm
0941 6920 030
250
20.0
35.0mm
RSGU1-35/20-1
8.0mm
0941 6920 035
250
20.0
40.0mm
RSGU1-40/20-1
8.0mm
0941 6920 040
250
20.0
45.0mm
RSGU1-45/20-1
8.0mm
0941 6920 045
250
20.0
50.0mm
RSGU1-50/20-1
8.0mm
0941 6920 050
250
20.0
55.0mm
RSGU1-55/20-1
8.0mm
0941 6920 055
250
20.0
57.0mm
RSGU1-57/20-1
8.0mm
0941 6920 057
250
20.0
60.0mm
RSGU1-60/20-1
8.0mm
0941 6920 060
100
20.0
64.0mm
RSGU1-64/20-1
8.0mm
0941 6920 064
100
20.0
65.0mm
RSGU1-65/20-1
8.0mm
0941 6920 065
100
20.0
66.0mm
RSGU1-66/20-1
8.0mm
0941 6920 066
100
20.0
70.0mm
RSGU1-70/20-1
8.0mm
0941 6920 070
100
20.0
75.0mm
RSGU1-75/20-1
8.0mm
0941 6920 075
100
20.0
76.0mm
RSGU1-76/20-1
8.0mm
0941 6920 076
100
91
W5
NORMAFIX® RSGU Pipe Retaining Clip W5 (Packed)
available in various band widths and screw hole sizes.
NORMAFIX® Pipe Retaining Clamp - 316 stainless steel - 6mm Mounting Hole
Band
Width
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
Clamping
Range
6.0mm
8.0mm
10.0mm
12.0mm
14.0mm
15.0mm
16.0mm
17.0mm
18.0mm
22.0mm
25.0mm
28.0mm
29.0mm
30.0mm
38.0mm
Part No.
RSGU1-6/15-W5
RSGU1-8/15-W5
RSGU1-10/15-W5
RSGU1-12/15-W5
RSGU1-14/15-W5
RSGU1-15/15-W5
RSGU1-16/15-W5
RSGU1-17/15-W5
RSGU1-18/15-W5
RSGU1-22/15-W5
RSGU1-25/15-W5
RSGU1-28/15-W5
RSGU1-29/15-W5
RSGU1-30/15-W5
RSGU1-38/15-W5
W5 Clip
Item No.
0941 7715 006
0941 7715 008
0941 7715 010
0941 7715 012
0941 7715 014
0941 7715 015
0941 7715 016
0941 7715 017
0941 7715 018
0941 7715 022
0941 7715 025
0941 7715 028
0941 7715 029
0941 7715 030
0941 7715 038
Pack
QTY
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
NORMAFIX® Pipe Retaining Clamp - W1 - 10mm Mounting Hole
Band
Width
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
92
Clamping
Range
6.0mm
9.0mm
10.0mm
13.0mm
15.0mm
16.0mm
18.0mm
19.0mm
20.0mm
22.0mm
25.0mm
27.0mm
29.0mm
32.0mm
35.0mm
38.0mm
51.0mm
Part No.
RSGU1-0616/10-W1
RSGU1-0916/10-W1
RSGU1-1016/10-W1
RSGU1-1316/10-W1
RSGU1-1516/10-W1
RSGU1-1616/10-W1
RSGU1-1816/10-W1
RSGU1-1916/10-W1
RSGU1-2016/10-W1
RSGU1-2216/10-W1
RSGU1-2516/10-W1
RSGU1-2716/10-W1
RSGU1-2916/10-W1
RSGU1-3216/10-W1
RSGU1-3516/10-W1
RSGU1-3816/10-1W
RSGU1-5116/10-1W
W1 Clip
Item No.
0824 0300 000
0824 0300 001
0824 0300 002
0824 0300 005
0824 0300 006
0824 0300 007
0824 0300 009
0824 0300 010
0824 0300 011
0824 0300 012
0824 0300 013
0824 0300 014
0824 0300 015
0824 0300 016
0824 0300 018
0824 0300 019
0824 0300 021
Pack
QTY
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
W1
available in various band widths and screw hole sizes.
NORMAFIX® RSGU90 Pipe Retaining Clip Assortment
Band Width
mm
15.0
15.0
Contents
Clamping Range Clip Qty
Part No.
RSGU1-4/15-1
4.0mm
10
RSGU1-6/15-1
6.0mm
10
15.0
RSGU1-9/15-1
9.0mm
10
15.0
RSGU1-10/15-1
10.0mm
10
15.0
RSGU1-12/15-1
12.0mm
10
15.0
RSGU1-13/15-1
13.0mm
10
15.0
RSGU1-15/15-1
15.0mm
5
15.0
RSGU1-16/15-1
16.0mm
5
15.0
RSGU1-18/15-1
18.0mm
5
15.0
RSGU1-20/15-1
20.0mm
5
15.0
RSGU1-22/15-1
22.0mm
5
15.0
RSGU1-25/15-1
25.0mm
5
Item No.
RSGU90
0825 0304 001
W1
NORMAFIX® RSGU Pipe Retaining Kits
93
W1
NORMAFIX® RSGU85 Pipe Retaining Clip Assortment
Band Width
mm
15.0
94
Contents
Clamping Range Clip Qty
Part No.
RSGU1-9/15-1
9.0mm
15
15.0
RSGU1-10/15-1
10.0mm
10
15.0
RSGU1-13/15-1
13.0mm
10
15.0
RSGU1-16/15-1
16.0mm
10
15.0
RSGU1-19/15-1
19.0mm
10
15.0
RSGU1-22/15-1
22.0mm
10
15.0
RSGU1-27/15-1
27.0mm
10
15.0
RSGU1-32/15-1
32.0mm
10
Item No.
RSGU85
0825 0304 000
W1
ducts, hose and other flow lines. The NormaFix® RSGU Clips are available in various band widths and
screw hole sizes.
NORMAFIX® heavy duty Pipe Retaining Clip Material Grade W1
- vinyl coated Galvanised 19mm
Band
Width
Clamping
Range
Part No.
Mounting
Hole
W1 Clamps
Item No.
Pack
Qty
19.0
8mm
RSGU1-081019W1
10
824 0319 008
10
19.0
10mm
RSGU1-101019W1
10
0824 0319 000
10
19.0
13mm
RSGU1-131019W1
10
0824 0319 001
10
19.0
14mm
RSGU1-141019W1
10
0824 0319 002
10
19.0
16mm
RSGU1-161019W1
10
0824 0319 003
10
19.0
18mm
RSGU1-181019W1
10
0824 0319 004
10
19.0
19mm
RSGU1-191019W1
10
0824 0319 005
10
19.0
20mm
RSGU1-201019W1
10
824 0319 009
10
19.0
22mm
RSGU1-221019W1
10
0824 0319 006
10
19.0
24mm
RSGU1-241019W1
10
824 0319 010
10
19.0
25mm
RSGU1-251019W1
10
0824 0319 007
10
NORMAFIX® PIPE RETAINING CLIPS MATERIAL GRADE W1 Heavy Duty VINYL COATED GALVANISED 19mm
Band
Width
Clamping
Range
Part No.
Mounting
Hole
W1 Clamps
Item No.
Pack
Qty
19.0
13mm
RSGU1-131319W1
13
824 0320 000
10
19.0
17mm
RSGU1-171319W1
13
824 0320 001
10
19.0
21mm
RSGU1-211319W1
13
824 0320 002
10
Additional sizes available to request. Minimum quantities apply
95
W1
NORMAFIX® PIPE RETAINING CLIPS MATERIAL GRADE W1
Heavy duty RUBBER LINED GALVANISED 19mm Bandwidth
96
Band
Width
Clamping
Range
Part No.
Mounting
Hole
W1 Clamps
Item No.
Pack
Qty
19.0
13mm
RSGU1-131319R1
13
824 0321 000
10
19.0
16mm
RSGU1-161319R1
13
824 0321 001
10
19.0
19mm
RSGU1-191319R1
13
824 0321 002
10
19.0
22mm
RSGU1-221319R1
13
824 0321 003
10
19.0
25mm
RSGU1-251319R1
13
824 0321 004
10
19.0
32mm
RSGU1-321319R1
13
824 0321 005
10
19.0
36mm
RSGU1-361319R1
13
824 0321 006
10
19.0
38mm
RSGU1-381319R1
13
824 0321 007
10
19.0
43mm
RSGU1-431319R1
13
824 0321 008
10
19.0
47mm
RSGU1-471319R1
13
824 0321 009
10
19.0
51mm
RSGU1-511319R1
13
824 0321 010
10
19.0
64mm
RSGU1-641319R1
13
824 0321 011
10
W1
ducts, hose and other flow lines. The NormaFix® RSGU Clips are available in various band widths and
screw hole sizes.
NORMAFIX® Pipe Retaining Clip Material Grade W1
Heavy duty vinyl coated Galvanised 25mm Bandwidth
Band
Width
Clamping
Range
Part No.
Mounting
Hole
W1 Clamps
Item No.
Pack
Qty
25.0
27mm
RSGU1-271325W1
13
0824 0325 000
10
25.0
29mm
RSGU1-291325W1
13
824 0325 009
10
25.0
32mm
RSGU1-321325W1
13
0824 0325 001
10
25.0
38mm
RSGU1-381325W1
13
0824 0325 002
10
25.0
40mm
RSGU1-401325W1
13
824 0325 008
10
25.0
44mm
RSGU1-441325W1
13
824 0325 007
10
25.0
51mm
RSGU1-511325W1
13
0824 0325 003
10
25.0
57mm
RSGU1-571325W1
13
0824 0325 004
10
25.0
64mm
RSGU1-641325W1
13
0824 0325 005
10
25.0
73mm
RSGU1-731325W1
13
0824 0325 006
10
Additional sizes available to request. Minimum quantities apply
97
NORMAFIX® Type 510 for 1 conduit (per pack)
Band
Width
10.0
10.0
10.0
10.0
12.0
12.0
12.0
Clamping
Range
5mm
6mm
8mm
10mm
12mm
15mm
18mm
Part No.
BSL1-5
BSL1-6
BSL1-8
BSL1-10
BSL1-12
BSL1-15
BSL1-18
Mounting
Hole
4.8
4.8
4.8
4.8
5.8
5.8
7
W1 Clamps
Item No.
0510 5000 105
0510 5000 106
0510 5000 108
0510 5000 110
0510 5000 112
0510 5000 115
0510 5000 118
Pack
Qty
10
10
10
10
10
10
10
NORMAFIX® Type 510 for 1 conduit (per carton)
Band
Width
10.0
10.0
10.0
10.0
10.0
10.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
Clamping
Range
4.0mm
5.0mm
6.0mm
7.0mm
8.0mm
10.mm
11.0mm
12.0mm
15.0mm
16.0mm
18.0mm
20.0mm
22.0mm
24.0mm
Part No.
BSL510-1-4
BSL510-1-5
BSL510-1-6
BSL510-1-7
BSL510-1-8
BSL510-1-10
BSL510-1-11
BSL510-1-12
BSL510-1-15
BSL510-1-16
BSL510-1-18
BSL510-1-20
BSL510-1-22
BSL510-1-24
Mounting
Hole
4.8
4.8
4.8
4.8
4.8
4.8
5.8
5.8
5.8
5.8
7
7
7
7
W1 Clamps
Item No.
0510 8980 104
0510 8980 105
0510 8980 106
0510 8980 107
0510 8980 108
0510 8980 110
0510 8980 111
0510 8980 112
0510 8980 115
0510 8980 116
0510 8980 118
0510 8980 120
0510 8980 122
0510 8980 124
Carton
Qty
100
100
100
100
100
100
100
100
100
100
100
100
100
100
NORMAFIX® Type 510 for 2 conduits (per pack)
Band
Width
10.0
Clamping
Range
2 x 6mm
10.0
2 x 8mm
BSL2-8
10.0
2 x 10mm
BSL2-10
Part No.
BSL2-6
Mounting
Hole
4.8
W1 Clamps
Item No.
0510 5000 206
Pack
Qty
10
4.8
0510 5000 208
10
4.8
0510 5000 210
10
NORMAFIX® Type 510 for 2 conduits (per carton)
Band
Width
10.0
10.0
10.0
12.0
98
Clamping
Range
4.0mm
5.0mm
6.0mm
7.0mm
Part No.
BSL510-2-6
BSL510-2-8
BSL510-2-10
BSL510-2-12
Mounting
Hole
4.8
4.8
4.8
5.8
W1 Clamps
Item No.
0510 8980 206
0510 8980 208
0510 8980 210
0510 8980 212
Carton
Qty
100
100
100
100
NORMAFIX® Type 512 for 1 conduit
Band
Width
10.0
10.0
10.0
10.0
10.0
10.0
12.0
12.0
12.0
12.0
12.0
Clamping
Range
4.0mm
5.0mm
6.0mm
7.0mm
8.0mm
10.0mm
12.0mm
15.0mm
18.0mm
20.0mm
22.0mm
Part No.
BSL512-1-4
BSL512-1-5
BSL512-1-6
BSL512-1-7
BSL512-1-8
BSL512-1-10
BSL512-1-12
BSL512-1-15
BSL512-1-18
BSL512-1-20
BSL512-1-22
Mounting
Hole
4.8
4.8
4.8
4.8
4.8
4.8
5.8
5.8
7
7
7
Clips
Item No.
0512 8980 104
0512 8980 105
0512 8980 106
0512 8980 107
0512 8980 108
0512 8980 110
0512 8980 112
0512 8980 115
0512 8980 118
0512 8980 120
0512 8980 122
Pack
Qty
100
100
100
100
100
100
100
100
100
100
100
Clips
Item No.
0512 8980 206
0512 8980 208
0512 8980 210
0512 8980 212
Pack
Qty
100
100
100
100
NORMAFIX® Type 512 for 2 conduits
Band
Width
10.0
10.0
10.0
12.0
Clamping
Range
6.0mm
8.0mm
10.0mm
12.0mm
Part No.
BSL512-2-6
BSL512-2-8
BSL512-2-10
BSL512-2-12
Mounting
Hole
4.8
4.8
4.8
5.8
99
NORMAFIX® Flex-O-Metre
This practical and flexible all-in-one dispenser allows for individual, tailor made clamps to suit a broad
variety of requirements.
The ergonomic shaped dispenser is available in narrow and wide band (8mm, 13mm and 14mm) and
comes in two material grades (semi stainless and full Stainless Steel). It has an inbuilt measuring system
for clamp diameter, a storage cell for clamp heads that has a window to view the amount of band left.
The genuine continuous band and closure kit is simple to use and easy to carry. With its convenient belt
clip and workshop hook it is the ideal tool for the tradesman on the move and is an ideal tool for the
hardware industry, plumbing, ducting installations and many other applications in the industrial sector.
of many different clamp sizes.
Available in 2 material grades: W2: band & housing: Stainless Steel (1.4016/Aisi 430) Screw: mild steel
zinc plated & chromate. W4: band, screw & housing: Stainless Steel throughout (1.4301/Aisi 304)
NORMAFIX® Flex-O-Metre® - 3 metres of band with closures
100
Band
Width
Part No.
Sizes
Material
Grade
NORMA
Item No.
Pack
Qty
8.0
MSF 8
3 mtrs x 8
W2
0817 0027 001
1
14.0
MSF 14
3 mtrs x 6
W2
0817 0027 002
1
8.0
MSFI 8
3 mtrs x 8
W4
0817 0027 003
1
13.0
MFSI 13
3 mtrs x 6
W4
0817 0027 004
1
NORMAFIX® K1 Bracket
Turns standard clamps to clamps with bracket.
NORMAFIX® K1 - BRACKET
Band
Width
Part No.
Suit Clamp
Size Range
Bandwidth/
Mount Hole
NORMA
Item No.
Pack
Qty
40.0
0
40-62
21.0 / 9.0
0060 6001 568
1
40.0
1
63-80
21.0 / 9.0
0060 6001 569
1
40.0
2
81-110
21.0 / 9.0
0060 6001 570
1
50.0
3
101-118
26.0 / 9.0
0060 6001 571
1
50.0
4
119-136
26.0 / 9.0
0060 6001 572
1
50.0
5
137-163
26.0 / 9.0
0060 6001 573
1
60.0
6
163-180
26.0 / 9.0
0060 6001 574
1
60.0
7
181-207
26.0 / 9.0
0060 6001 575
1
60.0
8
208-234
26.0 / 9.0
0060 6001 576
1
60.0
9
235-259
31.5 / 11.0
0060 6001 577
1
60.0
10
261-298
31.5 / 11.0
0060 6001 578
1
60.0
11
300-337
31.5 / 11.0
0060 6001 579
1
60.0
12
339-389
31.5 / 11.0
0060 6001 580
1
60.0
13 ¹
391-441
31.5 / 11.0
0060 6001 581
1
60.0
14¹
443-493
31.5 / 11.0
0060 6001 582
1
¹ Available to order only - min qty 10 pieces
101
NORMAFIX® Industrial Cable Ties
Normafix® industrial cable ties are available in numerous styles and
strengths for various specific applications across multiple industries
including; mining, rural, automotive and electrical. Normafix® cable
ties are manufactured to strict European standards and are production
certified iso 9001:2008.
NORMAFIX® standard CABLE TIES - NYLON PA 6.6 Band Width
Max
& Length mm Bundle ø
2.2 x 75
2.5 x 98
2.6 x 135
2.6 x 160
2.6 x 200
3.6 x 140
3.6 x 200
3.6 x 290
3.6 x 370
4.5 x 120
4.5 x 160
4.8 x 178
4.8 x 200
4.8 x 250
4.8 x 290
4.8 x 360
4.8 x 390
4.8 x 430
7.8 x 120
7.8 x 180
7.8 x 240
7.8 x 300
7.8 x 365
7.8 x 450
7.8 x 540
7.8 x 750
9.0 x 780
12.6 x 225
12.6 x 500
12.6 x 720
12.6 x 850
12.6 x 1000
15 mm
21 mm
32 mm
40 mm
52 mm
35 mm
50 mm
80 mm
103 mm
24 mm
40 mm
45 mm
50 mm
68 mm
79 mm
103 mm
106 mm
115 mm
25 mm
45 mm
63 mm
80 mm
100 mm
130 mm
158 mm
200 mm
233 mm
47 mm
143 mm
213 mm
255 mm
302 mm
Tensile
Strength Part Number Natural
min. in Kgs
6 Kgs.
0860 0110 101
8 Kgs.
0860 0110 201
8 Kgs.
0860 0110 301
8 Kgs.
0860 0110 302
8 Kgs.
0860 0110 303
13 Kgs.
0860 0110 401
13 Kgs.
0860 0110 402
13 Kgs.
0860 0110 403
13 Kgs.
0860 0110 404
20 Kgs.
0860 0110 501
20 Kgs.
0860 0110 502
22 Kgs.
0860 0110 601
22 Kgs.
0860 0110 602
22 Kgs.
0860 0110 603
22 Kgs.
0860 0110 604
22 Kgs.
0860 0110 605
22 Kgs.
0860 0110 606
22 Kgs.
0860 0110 607
55 Kgs.
0860 0110 701
55 Kgs.
0860 0110 702
55 Kgs.
0860 0110 703
55 Kgs.
0860 0110 704
55 Kgs.
0860 0110 705
55 Kgs.
0860 0110 706
55 Kgs.
0860 0110 707
55 Kgs.
0860 0110 708
77 Kgs.
0860 0110 801
110 Kgs.
0860 0110 901
110 Kgs.
0860 0110 902
110 Kgs.
0860 0110 903
110 Kgs.
0860 0110 904
110 Kgs.
0860 0110 905
Coloured Cable ties also available.
102
Part Number
Black
Pack
Qty
0860 0210 101
0860 0210 201
0860 0210 301
0860 0210 302
0860 0210 303
0860 0210 401
0860 0210 402
0860 0210 403
0860 0210 404
0860 0210 501
0860 0210 502
0860 0210 601
0860 0210 602
0860 0210 603
0860 0210 604
0860 0210 605
0860 0210 606
0860 0210 607
0860 0210 701
0860 0210 702
0860 0210 703
0860 0210 704
0860 0210 705
0860 0210 706
0860 0210 707
0860 0210 708
0860 0210 801
0860 0210 901
0860 0210 902
0860 0210 903
0860 0210 904
0860 0210 905
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
NORMAFIX® TOOLS FOR CABLE TIES NYLON PA 6.6
Suit Width
Part Number
2.2 to 4.8 mm
4.8 to 7.8 mm
0860 1000 001
0860 1000 004
NORMAFIX® Wall Plug bases for cable ties - Nylon PA 6.6
Type
ø Hole
(mm)
Dimensions
B & D (mm)
Standard
8 mm
37 x 9.5
Part
Number
Black
0860 0703 002* 0860 0703 101
Part Number
Natural
Pack
Qty
100
NORMAFIX® Wall Plug bases for cable ties - Nylon PA 6.6
Cable Tie
width mm
> 3.6
> 4.8
Part
Pack
Number
Qty
Black
19 19 4.1 4 & 5 0860 0942 101 0860 0942 201* 100
27 27 4.8 6 & 6. 5 0860 0942 102 0860 0942 202* 100
Dimensions (mm)
A B C F & H
Part Number
Natural
NORMAFIX® Industrial Cable Tie Tools & Accessories
* Product available to special order.
103
NORMAFIX® Industrial Cable Tie Floor Stand - 980
New Normafix® Industrial Cable Tie Floor Stand 980 freestanding cable tie metal floor stand. 202cm
high, 54cm wide and 36cm in depth. Cable Tie Floor Display - with movable hooks. Can contain up to
30 different dimensions of cable tie with a max quantity of 7 bags per hook.
NORMAFIX® NCT 980 Cable Tie Floor Stand
104
Part No
Width & Length
mm
Qty
Colour
0860 0210 201
2.5 x 98
6 packs
Black
0860 0210 401
3.6 x 140
6 packs
Black
0860 0210 402
3.6 x 200
6 packs
Black
0860 0210 403
3.6 x 290
6 packs
Black
0860 0210 602
4.8 x 200
6 packs
Black
0860 0210 603
4.8 x 250
6 packs
Black
0860 0210 604
4.8 x 290
6 packs
Black
0860 0210 605
4.8 x 360
6 packs
Black
0860 0210 705
7.8 x 365
6 packs
Black
0860 0110 201
2.5 x 98
6 packs
Natural
0860 0110 303
2.6 x 200
6 packs
Natural
0860 0110 602
4.8 x 200
6 packs
Natural
0860 0110 603
4.8 x 250
6 packs
Natural
0860 0110 604
4.8 x 290
6 packs
Natural
0860 0110 605
4.8 x 360
6 packs
Natural
0860 0110 705
7.8 x 365
2 packs
Natural
0860 0110 708
7.8 x 750
2 packs
Natural
0860 0942 101
Adhesive Base
2 packs
Natural
0860 0703 101
Wall Plug
2 packs
Black
0827 0310 001
202 x 54 x 36
1 pack
Grey
NORMAFIX® ELEFIX® pipe and cable fixing systems
With it’s in-built cable tie, NORMAFIX® ELEFIX® is the fast and practical support for
pipes, conduit and cables.
The universal fixing capability allows different anchor systems for concrete, brick,
plasterboard, timber etc.
Two versions, ø16-32mm and ø40-63mm, allow the fixing of conduits/pipes.
NORMAFIX® ELEFIX® pipe and cable fixing systems
Band Length
mm
180mm
280mm
Tensile
Strength
min. in Kgs
16-32 mm
36 Kgs.
40-63 mm
36 Kgs.
Pipe ø
mm
Item Number
Part Number
Colour
Pack
Qty
0827 0305 000
0827 0305 001
1632EFB (Outdoor)
4063EFG (Outdoor)
Black
Grey
100
100
105
Normafix® Stainless Steel cable ties are available in various band
widths and lengths and are best suited for heavy duty application,
where a greater resistance to atmospheric conditions, high temperature
and chemicals are required. Used in; mining, rural, automotive and
electrical. Normafix® cable ties are manufactured to strict European
standards and are production certified iso 9001:2008. Manufactured
in 304 Stainless Steel (W4).
NORMAFIX® CABLE TIES BALL LOCK- STAINLESS STEEL
Tensile
Band Width Max
Strength
& Length Bundle
min. in
mm
ø
Kgs
Part Number
100 Bags
Part Number
10 Pack
Pack
Qty
4.6 x 201
50
46
0827 0346 201 0827 5346 201
100
10
4.6 x 266
67
46
0827 0346 266 0827 5346 266
100
10
4.6 x 362
102
46
0827 0346 362 0827 5346 362
100
10
4.6 x 521
152
46
0827 0346 521 0827 5346 521
50
10
4.6 x 838
254
46
0827 0346 838 0827 5346 838
50
10
7.9 x 201
50
114
0827 0379 201 0827 5379 201
100
10
7.9 x 266
67
114
0827 0379 266 0827 5379 266
100
10
7.9 x 362
102
114
0827 0379 362 0827 5379 362
100
10
7.9 x 521
152
114
0827 0379 521 0827 5379 521
50
10
7.9 x 838
254
114
0827 0379 838 0827 5379 838
50
10
7.9 x 1067
305
114
0827 0379 067 0827 5379 067
50
10
NORMAFIX® TOOLS FOR CABLE TIES stainless steel
106
Pack
Qty
Suit Width
Part Number
4.6 to 7.9 mm
0827 0305 407
Normafix® single and twin head cable ties are designed with a larger
flat head, giving a high surface contact with the external teeth. These
heavy duty cable ties are used in electrical installations, industrial
wiring automotive and suspended lines. Normafix® cable ties are
manufactured to strict european standards and are production certified
iso 9001:2008.
NORMAFIX® CABLE TIES - HEAVY DUTY SINGLE & TWIN HEAD
Tensile
Strength min.
in Kgs
Part Number
Black
Pack
Qty
25 mm
25 Kgs.
0860 0506 115
100
9 mm
45 mm
25 Kgs.
0860 0506 180
100
Single
20 mm
78 mm
25 Kgs.
0860 0506 290
100
6 x 360
Single
20 mm
100 mm
25 Kgs.
0860 0506 360
100
9 x 132
Single
8 mm
27 mm
36.7 Kgs.
0860 0509 132
100
9 x 180
Single
10 mm
40 mm
36.7 Kgs.
0860 0509 180
100
9 x 265
Double
26 mm
60 mm
51 Kgs.
0860 0509 265
100
9 x 300
Double
26 mm
80 mm
51 Kgs.
0860 0509 300
100
9 x 360
Double
26 mm
93 mm
51 Kgs.
0860 0509 360
100
9 x 510
Double
70 mm
140 mm
54 Kgs.
0860 0509 510
100
9 x 760
Double
70 mm
220 mm
54 Kgs.
0860 0509 760
100
Band Width &
Length mm
Head Type
Min
Max
Bundle ø Bundle ø
6 x 115
Single
5 mm
6 x 180
Single
6 x 290
NORMAFIX® CABLE TIES - releasable
Normafix® resealable cable ties allow a quick and simple release of the tie. Ideal for
temporary installations or where cable removal is required. Manufactured in Polyamide 6.6.
Band Width
Max
& Length mm Bundle ø
Tensile
Strength
min. in Kgs
Part Number
Natural
Part
Number
Black
Pack
Qty
7.5 x 200
50 mm
22 Kgs.
0860 0411 001
0860 0421 001
100
7.5 x 250
65 mm
22 Kgs.
0860 0411 002
0860 0421 002
100
7.5 x 350
100 mm
22 Kgs.
0860 0411 003
0860 0421 003
100
107
W1
Terry® Tool Clips (Packed)
Terry® Tool Clips are produced in high quality spring steel.
Closed Type: The Closed Type tool clip is the most popular style of tool clip (Range 6-7mm to 51-54mm)
Open Type: The Open Type tool clip allows an easier entry or withdrawal of the item being secured (Range
from 6-7mm to 51-54mm)
Super Clip: The Super Clip is a heavy duty open style tool clip, designed for large object up to 106mm
diameter. All super clips have 2 mount holes (Range from 44-46mm to 102-106mm)
TERRY® TOOL CLIPS - CLOSED TYPE - Zinc plated spring steel
Grip size
Dia mm
Part No.
Clamping
Range (mm)
Pack
Qty
Norma
Item No.
6.0
10.0
13.0
16.0
19.0
25.0
28.0
32.0
38.0
51.0
80.06.3
80.10.3
80.13.3
80.16.3
80.19.3
80.25.3
80.28.3
80.32.3
80.38.3
80.51.3
6-7
10-12
13-14
16-19
19-21
25-27
28-31
32-34
38-40
51-54
100
100
100
100
100
50
50
10
10
10
0816 5012 006
0816 5013 010
0816 5012 013
0816 5012 016
0816 5023 019
0816 5012 025
0816 5012 028
0816 5013 032
0816 5013 038
0816 5013 051
TERRY® TERRY TOOL CLIPS - OPEN TYPE - Zinc plated spring steel
Grip size
Dia mm
Part No.
Clamping
Range (mm)
Pack
Qty
Norma
Item No.
6.0
10.0
13.0
16.0
19.0
25.0
28.0
32.0
38.0
51.0
81.06.3
81.10.3
81.13.3
81.16.3
81.19.3
81.25.3
81.28.3
81.32.3
81.38.3
81.51.3
6-7
10-12
13-14
16-19
19-21
25-27
28-31
32-34
38-40
51-54
100
100
100
100
100
50
50
10
10
10
0816 5011 006
0816 5012 010
0816 5011 013
0816 5011 016
0816 5022 019
0816 5011 025
0816 5011 028
0816 5012 032
0816 5012 038
0816 5012 051
TERRY® TERRY TOOL CLIPS - SUPER CLIP - Zinc plated spring steel
108
Grip size
Dia mm
Part No.
Clamping
Range (mm)
Pack
Qty
Norma
Item No.
44.0
64.0
76.0
89.0
102.0
20.44.3
20.64.3
20.76.3
20.89.3
20.102.3
44-46
64-67
76-79
89-93
102-106
10
10
10
10
10
0816 5001 044
0816 5000 064
0816 5000 076
0816 5000 089
0816 5000 102
W1
Terry® Tool Clips (Bulk)
TERRY® TOOL CLIPS - CLOSED TYPE - Zinc plated spring steel
Grip size
Dia mm
Part No.
Clamping
Range (mm)
Carton
Qty
Norma
Item No.
6.0
10.0
13.0
16.0
19.0
25.0
28.0
32.0
38.0
51.0
80.06.2
80.10.2
80.13.2
80.16.2
80.19.2
80.25.2
80.28.2
80.22.2
80.28.2
80.51.2
6-7
10-12
13-14
16-19
19-21
25-27
28-31
32-34
38-40
51-54
1000
1000
1000
1000
1000
500
500
100
100
100
0816 6009 006
0816 6009 010
0816 6009 013
0816 6009 016
0816 6009 019
0816 6009 025
0816 6009 028
0816 5009 032
0816 5009 038
0816 5009 051
TERRY® TOOL CLIPS - OPEN TYPE - Zinc plated spring steel
Grip size
Dia mm
Part No.
Clamping
Range (mm)
Pack
Qty
Norma
Item No.
6.0
10.0
13.0
16.0
19.0
25.0
28.0
32.0
38.0
51.0
81.06.2
81.10.2
81.13.2
81.16.2
81.19.2
81.25.2
81.28.2
81.22.2
81.28.2
81.51.2
6-7
10-12
13-14
16-19
19-21
25-27
28-31
32-34
38-40
51-54
1000
1000
1000
1000
1000
500
500
100
100
100
0816 6008 006
0816 6008 010
0816 6008 013
0816 6008 016
0816 6008 019
0816 6008 025
0816 6008 028
0816 5008 032
0816 5008 038
0816 5008 051
TERRY® TOOL CLIPS - SUPER CLIP- Zinc plated spring steel
Grip size
Dia mm
Part No.
Clamping
Range (mm)
Pack
Qty
Norma
Item No.
44.0
64.0
76.0
89.0
102.0
20.44.2
20.64.2
20.76.2
20.89.2
20.102.2
44-46
64-67
76-79
89-93
102-106
100
100
50
50
50
0816 0012 044
0816 0012 064
0816 0012 076
0816 0012 089
0816 0012 102
109
bandimex
bands & buckles
111
Bandimex®
Bandimex® continuous banding system connects, clamps,
fastens, secures or fixes hose, pipes, cables, signs, boards etc.
With the large selection of band widths, the versatile Bandimex
system replaces the need to buy individual clamps for different
jobs. With a roll of band, a box of buckles and tightening tool
you can produce very strong clamps of any size and for almost
every application.
Bandimex® Plain Banding
Part
Number
B202
B203
B204
B205
B206
B402
B403
B404
B405
B406
B803
B804
B805
B806
Item Number
0820
0820
0820
0820
0820
0820
0820
0820
0820
0820
0820
0820
0820
0820
0300 001
0300 002
0300 003
0300 004
0300 005
0300 006
0300 007
0300 008
0300 009
0300 010
0300 032
0300 033
0300 034
0300 035
Material
Band Width
S/Steel CrNi
S/Steel CrNi
S/Steel CrNi
S/Steel CrNi
S/Steel CrNi
S/Steel CrNiMo
S/Steel CrNiMo
S/Steel CrNiMo
S/Steel CrNiMo
S/Steel CrNiMo
S/Steel CrNi
S/Steel CrNi
S/Steel CrNi
S/Steel CrNi
6.4mm-1/4"
9.5mm-3/8"
12.7mm-1/2"
16.0mm-5/8"
19.0mm-3/4"
6.4mm-1/4"
9.5mm-3/8"
12.7mm-1/2"
16.0mm-5/8"
19.0mm-3/4"
9.5mm-3/8"
12.7mm-1/2"
16.0mm-5/8"
19.0mm-3/4"
Band
Thickness
0.50mm-.020"
0.64mm-.025"
0.75mm-.030"
0.75mm-.030"
0.75mm-.030"
0.50mm-.020"
0.64mm-.025"
0.75mm-.030"
0.75mm-.030"
0.75mm-.030"
0.64mm-.025"
0.75mm-.030"
0.75mm-.030"
0.75mm-.030"
Bandimex® Buckles
Part
Number
S252
S253
S254
S255
S256
S452
S453
S454
S455
S456
112
Item Number
0820
0820
0820
0820
0820
0820
0820
0820
0820
0820
0300 016
0300 017
0300 018
0300 019
0300 020
0300 024
0300 025
0300 026
0300 027
0300 028
Material
Band Width
S/Steel CrNi
S/Steel CrNi
S/Steel CrNi
S/Steel CrNi
S/Steel CrNi
S/Steel CrNiMo
S/Steel CrNiMo
S/Steel CrNiMo
S/Steel CrNiMo
S/Steel CrNiMo
6.4mm-1/4"
9.5mm-3/8"
12.7mm-1/2"
16.0mm-5/8"
19.0mm-3/4"
6.4mm-1/4"
9.5mm-3/8"
12.7mm-1/2"
16.0mm-5/8"
19.0mm-3/4"
Pack
Qty
100
100
100
100
100
100
100
100
100
100
Pack
Qty
30mtr.
30mtr.
30mtr.
30mtr.
30mtr.
30mtr.
30mtr.
30mtr.
30mtr.
30mtr.
30mtr.
30mtr.
30mtr.
30mtr.
Bandimex®
Bandimex® Scru Buckles
Part
Number
S722
S724
S726
Item Number
Material
Band Width
0820 0300 029
0820 0300 030
0820 0300 031
S/Steel CrNi
S/Steel CrNi
S/Steel CrNi
9.5mm-3/8"
12.7mm-1/2"
19.0mm-3/4"
Pack
Qty
50
25
25
Bandimex® Jumbo Band
Part
Number
B430
B431
B432
Item Number
Material
Band Width
0820 0300 011
0820 0300 012
0820 0300 013
S/Steel CrNi
S/Steel CrNi
S/Steel CrNi
19.0mm-3/4"
25.0mm-1"
32.0mm-1 1/4"
Band
Thickness
1.2mm-0.47"
1.0mm-.040"
1.0mm-.040"
Pack
Qty
30mtr.
30mtr.
30mtr.
Bandimex® Jumbo Buckles
Part
Number
S440
S441
S442
Item Number
Material
Band Width
0820 0300 021
0820 0300 022
0820 0300 023
S/Steel CrNi
S/Steel CrNi
S/Steel CrNi
19.0mm-3/4"
25.0mm-1"
32.0mm-1 1/4"
Pack
Qty
25
25
25
Bandimex® Free End Clamps
Part
Number
Item Number
Material
E203
E204
E207
E209
0820 0300 038
0820 0300 039
0820 0300 040
0820 0300 041
S/Steel CrNi
S/Steel CrNi
S/Steel CrNi
S/Steel CrNi
Length
mm &
inch
250 mm
360 mm
480 mm
520 mm
Band Width
Pack
Qty
6.4 mm
6.4 mm
6.4 mm
6.4 mm
50
50
50
50
Bandimex® Quick Release Buckles
Part
Number
H100-124/W1
H100-400/W1
H100-800/W1
Item Number
Material
Band Width
0560 8558 124
0560 8558 400
0560 8558 800
M/Steel, Zinc Plated
100-124mm
125-400mm
400-800mm
Pack
Qty
20
20
20
113
Bandimex®
Bandimex® Worm Drive Seal - Suit 9.5mm (3/8”) Plain Banding
Part
Number
A220
Item Number
Material
Band Width
0820 0302 003
S/Steel CrNi
suit 9.5mm
Pack
Qty
10
Bandimex® Mounting Brackets
Part
Number
H021
H026
H096
Item Number
Material
0820 0302 000 1 Bolt Flared Leg
0820 0302 001 90mm x 9.0mm slotted holes,50-80mm
0820 0302 002 Y Bracket, 60mm long
Pack
Qty
50
50
50
Bandimex® Tools
Part
Number
W001
W101
W043
W402
V001
V050
V440
Item Number
Material
0820 0303 003
0820 0303 017
0820 0303 006
0820 0303 007
0820 0303 000
0820 0303 002
0820 0303 009
Tightening & Cutting Tool, 1 Ton
Pocket' - Tightening & Cutting Tool
Close Quarter Tension Nut for W001
JUMBO Tightening Tool, 2.5 Ton
Adapter, suit W001 for pre-form clamps
H/D Field Adapter, suit W001 for pre-form clamps
Air Tool- for pre-form clamp installation
Pack
Qty
1
1
1
1
1
1
1
Bandimex® Tool Spares
Part
Number
W006
W016
V015
V440
Item Number
Material
0820 0303 004
0820 0303 005
0820 0303 001
0820 0303 009
Replacement Handle & Screw - Suit W001
Replacement Ball Bearing - Suit W001
Adaptor Cutter Blades - Suit V001 & V050
Air Tool- for pre-form clamp installation
Pack
Qty
1
1
1
1
Normetta® Worm Drive Banding Buckles
Part
Number
NB-G 12W1
NB-G 12W3
NB-WD 12W1
NB-WD 12W3
114
Item Number
0560 8565 001
0560 8565 003
0560 8566 001
0560 8566 003
Material
S/Steel-1-4016
S/Steel-1-4016
Band Width
12
12
12
12
Pack
Qty
50
50
30mtr
30mtr
W4
Bandimex®
Bandimex® Preformed Clamps
Part
Number
Item Number
Material
Clamp-ID mm
& inch
Band Width
Band
Thickness
Pack
Qty
V240
0820 0301 018
V201
0820 0301 000
S/Steel CrNi
19.0mm-3/4"
6.4mm-1/4"
0.50mm-.020"
100
S/Steel CrNi
21.0mm-13/16"
9.5mm-3/8"
0.64mm-.025"
100
V242
V243
0820 0301 020
S/Steel CrNi
25.0mm-1"
6.4mm-1/4"
0.50mm-.020"
100
0820 0301 021
S/Steel CrNi
25.0mm-1"
9.5mm-3/8"
0.64mm-.025"
100
V203
0820 0301 002
S/Steel CrNi
25.0mm-1"
12.7mm-1/2"
0.75mm-.030"
100
V204
0820 0301 003
S/Steel CrNi
32.0mm-1 1/4"
12.7mm-1/2"
0.75mm-.030"
100
V202
0820 0301 001
S/Steel CrNi
35.0mm-1 3/8"
9.5mm-3/8"
0.64mm-.025"
100
V241
0820 0301 019
S/Steel CrNi
35.0mm-1 3/8"
6.4mm-1/4"
0.50mm-.020"
100
V252
0820 0301 024
S/Steel CrNi
38.0mm-1 1/2"
6.4mm-1/4"
0.50mm-.020"
100
V205
0820 0301 004
S/Steel CrNi
38.0mm-1 1/2"
16.0mm-5/8"
0.75mm-.030"
100
V236
0820 0301 017
S/Steel CrNi
45.0mm-1 3/4"
12.7mm-1/2"
0.75mm-.030"
100
V206
0820 0301 005
S/Steel CrNi
45.0mm-1 3/4"
16.0mm-5/8"
0.75mm-.030"
100
V245
0820 0301 022
S/Steel CrNi
48.0mm-1 7/8"
9.5mm-3/8"
0.64mm-.025"
100
V207
0820 0301 006
S/Steel CrNi
51.0mm-2"
16.0mm-5/8"
0.75mm-.030"
100
V208
0820 0301 007
S/Steel CrNi
57.0mm-2 1/4"
16.0mm-5/8"
0.75mm-.030"
100
V209
0820 0301 008
S/Steel CrNi
64.0mm-2 1/2"
16.0mm-5/8"
0.75mm-.030"
100
V230
0820 0301 016
S/Steel CrNi
70.0mm-2 3/4"
12.7mm-1/2"
0.75mm-.030"
100
V210
0820 0301 009
S/Steel CrNi
70.0mm-2 3/4"
19.0mm-3/4"
0.75mm-.030"
50
V246
0820 0301 023
S/Steel CrNi
76.0mm-3"
9.5mm-3/8"
0.64mm-.025"
100
V211
0820 0301 010
S/Steel CrNi
76.0mm-3"
19.0mm-3/4"
0.75mm-.030"
50
V231
0820 0301 046
S/Steel CrNi
89.0mm-3 1/2"
12.7mm-1/2"
0.75mm-.030"
50
V212
0820 0301 011
S/Steel CrNi
89.0mm-3 1/2"
19.0mm-3/4"
0.75mm-.030"
50
V213
0820 0301 012
S/Steel CrNi
102.0mm-4"
19.0mm-3/4"
0.75mm-.030"
25
V214
0820 0301 013
S/Steel CrNi
114.0mm-4 1/2" 19.0mm-3/4"
0.75mm-.030"
25
V215
0820 0301 014
S/Steel CrNi
127.0mm-5"
19.0mm-3/4"
0.75mm-.030"
25
V216
0820 0301 015
S/Steel CrNi
152.0mm-6"
19.0mm-3/4"
0.75mm-.030"
25
V218
0820 0301 047
S/Steel CrNi
180.0mm-7"
19.0mm-3/4"
0.75mm-.030"
25
115
normaplast®
117
NORMAPLAST® SV Plastic Push On Hose Connectors
NORMAPLAST® SV push on fittings are connected quickly and easily with one another by just
pushing the hose onto the connectors. The ribbed surface of the push-on spigots ensures that
the hoses are tight-fit after assembly. The NORMAPLAST® SV hose connectors are made of
naturally coloured POM (acetalcopolymerisat).
NORMAplast® straight connector
Inside Hose
Dia (mm)
Part No.
Item No.
Pack
Qty
3.0
GS3
0750 5000 003
10
Bulk
Carton
Qty
100
4.0
GS4
0750 5000 004
10
100
5.0
GS5
0750 5000 005
10
100
6.0
GS6
0750 5002 006
10
100
8.0
GS8
0750 5001 008
10
100
10.0
GS10
0750 5001 010
10
100
12.0
GS12
0750 5000 012
10
100
13.0
GS13
0750 8900 013
10
100
14.0
GS14
0750 8900 014
10
100
16.0
GS16
0750 8900 016
10
100
19.0
GS19
0750 8900 019
10
50
25.0
GS25
0750 8900 025
10
25
ACETAL RESIN
FITTINGS (POM)
NORMAplast® straight connector - reducing
118
Inside Hose
Dia (mm)
Part No.
Item No.
Pack
Qty
Carton
Qty
4.0-3.0
GRS4-3
0751 8904 003
10
100
6.0-4.0
GRS6-4
0751 8906 004
10
100
8.0-4.0
GRS8-4
0751 8908 004
10
100
8.0-6.0
GRS8-6
0751 8908 006
10
100
10.0-6.0
GRS10-6
0751 8910 006
10
100
10.0-8.0
GRS10-8
0751 8910 008
10
100
12.0-8.0
GRS12-8
0751 8912 008
10
100
12.0-10.0
GRS12-10
0751 8912 010
10
100
ACETAL RESIN
FITTINGS (POM)
pushing the hose onto the connectors. The NORMAPLAST® SV hose connectors are made of
NORMAplast® T connector
Inside Hose
Dia (mm)
3.0
0760 5000 003
Pack
Qty
10
Bulk Carton
Qty
100
TS
0760 5000 004
10
100
TS
0760 5000 005
10
100
6.0
TS
0760 5001 006
10
100
7.0
TS
0760 5000 007
10
100
8.0
TS
0760 5001 008
10
100
10.0
TS
0760 5000 010
10
100
12.0
TS
0760 5000 012
10
100
13.0
TS
0760 8900 013
10
100
14.0
TS
0760 8900 014
10
50
15.0
TS
0760 8900 015
10
50
16.0
TS
0760 8900 016
10
50
19.0
TS
0760 8900 019
10
25
25.0
TS
0760 8900 025
10
25
Part No.
Item No.
TS
4.0
5.0
ACETAL RESIN
FITTINGS (POM)
NORMAplast® T connector - REDUCING
Inside Hose
Dia (mm)
Part No.
Item No.
Pack
Qty
Carton
Qty
3.0-4.0-3.0
TRS3-4-3
0761 8903 004
10
100
4.0-6.0-4.0
TRS4-6-4
0761 8904 006
10
100
6.0-4.0-6.0
TRS6-4-6
0761 8906 004
10
100
8.0-4.0-8.0
TRS8-4-8
0761 8908 004
10
100
8.0-6.0-8.0
TRS8-6-8
0761 8908 006
10
100
8.0-12.0-8.0
TRS8-12-8
0761 8908 012
10
100
10.0-6.0-10.0
TRS10-6-10
0761 8910 006
10
100
10.0-8.0-10.0
TRS10-8-10
0761 8910 008
10
100
10.0-13.0-10.0 TRS10-13-10
0761 8910 013
10
100
12.0-6.0-12.0
TRS12-6-12
0761 8912 006
10
100
12.0-8.0-12.0
TRS12-8-12
0761 8912 008
10
100
12.0-10.0-12.0 TRS12-10-12
0761 8912 010
10
100
15.0-6.0-15.0
TRS15-6-15
0761 8915 006
10
100
15.0-8.0-15.0
TRS15-8-15
0761 8915 008
10
100
18.0-10.0-18.0 TRS18-10-18
0761 8918 010
10
50
18.0-15.0-18.0 TRS18-15-18
0761 8918 015
10
50
ACETAL RESIN
FITTINGS (POM)
119
NORMAplast® 90º connector
Inside Hose
Dia (mm)
Part No.
Item No.
Pack
Qty
Carton
Qty
3.0
WS3
0762 5000 003
10
100
4.0
WS4
0762 5001 004
10
100
5.0
WS5
0762 5000 005
10
100
6.0
WS6
0762 5000 006
10
100
8.0
WS8
0762 5001 008
10
100
10.0
WS10
0762 5001 010
10
100
12.0
WS12
0762 5000 012
10
100
13.0
WS13
0762 8900 013
10
100
14.0
WS14
0762 8900 014
10
100
15.0
WS15
0762 8900 015
10
100
16.0
WS16
0762 8900 016
10
50
19.0
WS19
0762 8900 019
10
50
25.0
WS25
0762 8900 025
10
25
ACETAL RESIN
FITTINGS (POM)
NORMAplast® Y connector
Inside Hose
Part No.
Dia (mm)
120
Item No.
Pack
Qty
Carton
Qty
3.0
YS3
0770 5000 003
10
100
4.0
YS4
0770 5000 004
10
100
5.0
YS5
0770 5001 005
10
100
6.0
YS6
0770 5001 006
10
100
8.0
YS8
0770 5000 008
10
100
10.0
YS10
0770 5000 010
10
100
12.0
YS12
0770 5000 012
10
100
13.0
YS13
0770 8900 013
10
100
14.0
YS14
0770 8900 014
10
50
16.0
YS16
0770 8900 016
10
50
19.0
YS19
0770 8900 019
10
25
ACETAL RESIN
FITTINGS (POM)
NORMAplast® Y connector
Inside Hose
Dia (mm)
Part No.
Item No.
Pack
Qty
Carton
Qty
4.0-6.0-4.0
YRS4-6-4
0771 8904 006
10
100
6.0-8.0-6.0
YRS6-8-6
0771 8906 008
10
100
ACETAL RESIN
FITTINGS (POM)
NORMAplast® cross connector
Inside Hose
Dia (mm)
Part No.
Item No.
Pack
Qty
Carton
Qty
4.0
KS4
0772 8900 004
10
100
5.0
KS5
0772 8900 005
10
100
6.0
KS6
0772 8900 006
10
100
12.0
KS12
0772 8900 012
10
50
ACETAL RESIN
FITTINGS (POM)
121
NORMAPLAST® SV Plastic Threaded Hose Connectors
NORMAplast® GES connector - threaded
Inside Hose
Dia (mm)
Part No.
Item No.
Pack
Qty
Carton
Qty
4.0
GES4/R1/8
0710 8910 004
10
100
4.0
GES4/R1/4
0710 8911 004
10
100
5.0
GES5/R1/4
0710 8911 005
10
100
6.0
GES6/R1/8
0710 8910 006
10
100
6.0
GES6/R1/4
0710 8911 006
10
100
6.0
GES6/R3/8
0710 8912 006
10
100
8.0
GES8/R1/8
0710 8910 008
10
100
8.0
GES8/R1/4
0710 8911 008
10
100
8.0
GES8/R3/8
0710 8912 008
10
100
8.0
GES8/R1/2
0710 8913 008
10
100
10.0
GES10/R1/4
0710 8911 010
10
100
10.0
GES10/R3/8
0710 8912 010
10
100
12.0
GES12/R3/8
0710 8912 012
10
100
12.0
GES12/R1/2
0710 8913 012
10
100
14.0
GES14/R3/8
0710 8912 014
10
100
14.0
GES14/R1/2
0710 8913 014
10
100
16.0
GES16/R1/2
0710 8913 016
10
50
16.0
GES16/R3/4
0710 8914 016
10
50
19.0
GES19/R3/4
0710 8914 019
10
50
25.0
GES25/R1
0710 8915 025
10
50
Polyamide 6
NORMAplast® BST connector
122
Inside Hose
Dia (mm)
Part No.
Item No.
Pack
Qty
Carton
Qty
-
BST R1/8
0711 8910 000
10
100
-
BST R1/4
0711 8911 000
10
100
-
BST R3/8
0711 8912 000
10
100
-
BST R1/2
0711 8913 000
10
100
Polyamide 6
NORMAPLAST® SV Plastic Threaded Hose Connectors
NORMAplast® TES connector - threaded
Inside Hose
Dia (mm)
Part No.
Item No.
Pack
Qty
Carton
Qty
4.0
TES4/R1/8
0720 8910 004
10
100
4.0
TES4/R1/4
0720 8911 004
10
100
6.0
TES6/R1/8
0720 8910 006
10
100
6.0
TES6/R1/4
0720 8911 006
10
100
8.0
TES8/R1/4
0720 8911 008
10
100
10.0
TES10/R3/8 0720 8912 010
10
100
Polyamide 6
NORMAplast® WES connector - threaded
Inside Hose
Dia (mm)
Part No.
Item No.
Pack
Qty
Carton
Qty
4.0
WES4/R1/8
0730 8910 004
10
100
4.0
WES4/R1/4
0730 8911 004
10
100
6.0
WES6/R1/8
0730 8910 006
10
100
6.0
WES6/R1/4
0730 8911 006
10
100
6.0
WES6/R3/8
0730 8912 006
10
100
8.0
WES8/R1/8
0730 8910 008
10
100
8.0
WES8/R1/4
0730 8911 008
10
100
8.0
WES8/R3/8
0730 8912 008
10
100
8.0
WES8/R1/2
0730 8913 008
10
100
10.0
WES10/R1/4 0730 8911 010
10
100
10.0
WES10/R3/8 0730 8912 010
10
100
12.0
WES12/R3/8 0730 8912 012
10
100
12.0
WES12/R1/2 0730 8913 012
10
100
19.0
WES19/R3/4 0730 8914 019
10
50
10
25
25.0
WES25/R1
0730 8915 025
Polyamide 6
123
NORMAPLAST® Plastic Connector Kits
NORMAplast® Plastic Connector Assortment Kit NPC90
Contents
Part No.
Inside
Diameter
Plastics
Qty
GS3
GS5
GS6
GS8
GS10
GS12
TS3
TS5
TS6
TS8
TS10
TS12
YS3
YS5
YS6
YS8
YS10
YS12
3.0
5.0
6.0
8.0
10.0
12.0
3.0
5.0
6.0
8.0
10.0
12.0
3.0
5.0
6.0
8.0
10.0
12.0
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
Item No.
NPC90
0825 0305 001
NORMAplast® Plastic Connector Assortment Kit NPC180
124
Contents
Part No.
Inside
Diameter
Plastics
Qty
GS3
GS5
GS6
GS8
GS10
TS3
TS5
TS6
TS8
TS10
3.0
5.0
6.0
8.0
10.0
3.0
5.0
6.0
8.0
10.0
25
25
10
10
10
25
25
20
20
10
Item No.
NPC180
0825 0305 000
125
Oetiker®
ear clamps
127
W4
EAR CLAMPS
1-Ear Clamps with Insert are ideal for critical joints that
incorporate soft or hard rubber, or plastic materials.
1-Ear Clamps with Insert Ring
128
Theoretical
Clamp
Clamping
Width (mm)
Range (mm)
Part No.
Norma Item
Number
Alternative Part
Number
Catalogue
No.
Pack
Qty
15400024
0821 0302 004
16700005
10.5RER
8.5 - 10.0
7.4
100
15400029
0821 0302 005
16700008
12.3RER
9.8 - 11.8
7.4
100
15400030
0821 0302 006
16700009
12.8RER
10.3 - 12.3
7.4
100
15400032
0821 0302 007
16700010
13.8RER
11.1 - 13.1
8.2
100
15400034
0821 0302 009
16700011
14.5RER
11.8 - 13.8
8.2
100
15400035
0821 0302 010
16700013
15.0RER
12.3 - 14.3
8.2
100
15400036
0821 0302 011
16700014
15.5RER
12.8 - 14.8
8.2
100
15400037
0821 0302 012
16700015
16.0RER
13.1 - 15.3
8.2
100
15400038
0821 0302 013
16700016
16.5RER
13.2 - 15.8
8.2
100
15400039
0821 0302 014
16702494
16.8RER
13.9 - 16.1
8.2
100
15400040
0821 0302 015
16702496
17.5RER
14.6 - 16.8
8.2
100
15400041
0821 0302 016
16700018
18.5RER
15.6 - 17.8
8.2
100
15400047
0821 0302 020
16700026
22.5RER
19.2 - 21.8
9.2
100
15400050
0821 0302 023
16700031
25.5RER
22.0 - 24.8
9.2
100
W4
EAR CLAMPS
Stepless 1-Ear Clamps provide a full 360º seal, they are designed as a replacement
for the 1 Ear clamp with insert. Provides an excellent quality seal often used in
beverage, automotive, marine and industrial applications. 304 Stainless Steel.
Stepless 1-Ear-Clamps - Stainless Steel
16700001 0821 0305 000
Stepless 1-Ear-Clamp
007.0-505R
Theoretical
Clamping
Range (mm)
5.8 - 7.0
16700002 0821 0305 001
008.0-505R
6.8 - 8.0
Part No.
Norma Item
Number
Description
Catalogue
No.
Clamp
Width
(mm)
5
5
Pack
Qty
100
100
16700003 0821 0305 002
008.7-505R
7.0 - 8.7
5
100
16702491 0821 0305 022
009.0-505R
7.3 - 9.0
5
100
16700004 0821 0305 039
009.5-505R
7.8 - 9.5
5
100
16700005 0821 0305 003
010.0-505R
8.3 - 10.0
5
100
16700006 0821 0305 031
010.5-505R
8.8 - 10.5
5
100
16702492 0821 0305 023
010.9-505R
9.2 - 10.9
5
100
16700007 0821 0305 004
011.3-505R
9.6 - 11.3
5
100
16700008 0821 0305 005
011.8-505R
10.1 - 11.8
5
100
16700009 0821 0305 006
012.3-706R
9.8 - 12.3
7
100
16702493 0821 0305 024
012.8-706R
10.3 - 12.8
7
100
16700010 0821 0305 007
013.3-706R
10.8 -1 3.3
7
100
16700011 0821 0305 008
013.8-706R
11.3 - 13.8
7
100
16700013 0821 0305 009
014.5-706R
12.0 - 14.5
7
100
16700014 0821 0305 010
014.8-706R
12.3 - 14.8
7
100
16700015 0821 0305 011
015.3-706R
12.8 - 15.3
7
100
16700016 0821 0305 012
015.7-706R
13.2 - 15.7
7
100
16702495 0821 0305 025
016.6-706R
14.1 - 16.6
7
100
16700017 0821 0305 013
017.0-706R
14.5 - 17.0
7
100
16700018 0821 0305 014
017.8-706R
14.6 - 17.8
7
100
16700020 0821 0305 015
018.5-706R
15.3 - 18.5
7
100
16700110 0821 0305 034
019.2-706R
16.0 - 19.2
7
100
16702498 0821 0305 026
019.8-706R
16.6 - 19.8
7
100
16700024 0821 0306 013
021.0-706R
17.8 - 21.0
7
100
16700026 0821 0305 016
022.6-706R
19.4 - 22.6
7
100
16700029 0821 0305 017
024.1-706R
20.9 - 24.1
7
100
16700033 0821 0305 028
027.1-706R
23.9 - 27.1
7
100
16700035 0821 0305 036
028.6-706R
25.4 - 28.6
7
100
16700037 0821 0305 018
030.1-706R
26.9 - 30.1
7
100
16700040 0821 0305 019
031.6-706R
28.4 - 31.6
7
100
16700044 0821 0306 017
034.6-706R
31.4 - 34.6
7
100
129
W1
EAR CLAMPS
2-Ear Clamps with Insert are ideal for critical joints that incorporate
soft or hard rubber, or plastic materials.
2-Ear-Clamps - Mild Steel Zinc Plated
Part No.
130
Norma Item
Number
Description
Catalogue
No.
Theoretical
Clamping
Range (mm)
Clamp
Width
(mm)
Pack
Qty
10100000
0821 0308 025 2-Ear Clamp from Tube
0041
3.1 - 4.1
5
100
10100002
0305
3.4 - 5.0
5
100
10100004
0507
5.0 - 7.0
6
100
10100008
0709
7.0 - 9.0
7
100
10100013
0911
9.0 - 11.0
7
100
10100016
1113
11.0 - 13.0
7
100
10100019
1315
13.0 - 15.0
7.5
100
10100022
1517
15.0 - 17.0
8
100
10100024
1518
15.0 - 18.0
8
100
10100097
1619
16.0 - 19.0
8
100
10100027
1720
17.0 - 20.0
8.5
100
10100029
1922
19.0 - 22.0
9
100
10100030
2023
20.0 - 23.0
9
100
10100032
2225
22.0 - 25.0
10
100
10100034
2327
23.0 - 27.0
10
100
10100035
2528
25.0 - 28.0
10
100
10100039
2831
28.0 - 31.0
10
100
10100041
3134
31.0 - 34.0
10
100
10100043
3437
34.0 - 37.0
10
100
10100045
3740
37.0 - 40.0
10
100
10100047
4043
40.0 - 43.0
10
100
10100049
4346
43.0 - 46.0
10
100
W4
EAR CLAMPS
2-Ear Clamps with Insert are ideal for critical joints that incorporate
soft or hard rubber, or plastic materials.
2-Ear-Clamps - Stainless Steel
Norma Item
Number
Description
Catalogue
No.
Theoretical
Clamping
Range (mm)
Clamp
Width
(mm)
Pack
Qty
15100002
0821 0309 019
2-Ear Clamp from Tube
0305R
3.0 - 5.0
6
100
15100003
0821 0309 000
0507R
5.0 - 7.0
6
100
15100004
0821 0309 001
0709R
7.0 - 9.0
7
100
15100005
0821 0309 002
0911R
9.0 - 11.0
7
100
15100006
0821 0309 003
1113R
11.0 - 13.0
7
100
15100007
0821 0309 004
1315R
13.0 - 15.0
7.5
100
15100008
0821 0309 005
1517R
15.0 - 17.0
8
100
15100009
0821 0309 006
1518R
15.0 - 18.0
8
100
15100010
0821 0309 007
1720R
17.0 - 20.0
8.5
100
15100011
0821 0309 008
1922R
19.0 - 22.0
9
100
15100012
0821 0309 009
2023R
20.0 - 23.0
9
100
15100013
0821 0309 010
2225R
22.0 - 25.0
10
100
15100014
0821 0309 011
2327R
23.0 - 27.0
10
100
15100015
0821 0309 012
2528R
25.0 - 28.0
10
100
15100017
0821 0309 013
2831R
28.0 - 31.0
10
100
15100018
0821 0309 014
3134R
31.0 - 34.0
10
100
15100019
0821 0309 015
3437R
34.0 - 37.0
10
100
15100020
0821 0309 016
3740R
37.0 - 40.0
10
100
15100021
0821 0309 017
4043R
40.0 - 43.0
10
100
15100022
0821 0309 018
4346R
43.0 - 46.0
10
100
Part No.
Ear Clamp Tools
Norma Item
Number
Description
14100329
0821 0320 006
Hand Pincer - normal
14100083
0821 0320 007 Hand Pincer - side closing
Part No.
Catalogue Pack
No.
Qty
1098
Each
1099
Each
131
W1
EAR CLAMPS Assortment kits
Twin Clamp form Tube
Part No.
Norma Item
Number
Description
Catalogue
No.
Theoretical
Clamping
Range (mm)
Clamp
Width
(mm)
Pack
Qty
10800005 *
0821 0311 001
Twin Clamp from Tube
1415/2
14.0 - 15.0
9.0
100
10800006 *
0821 0311 002
1617/2
16.0 - 17.0
10.0
100
10800007*
0821 0311 004
1819/2
18.0 - 19.0
10.0
100
10800008*
0821 0311 003
2021/2
20.0 - 21.0
10.0
100
* Denotes while current stock available.
2-Ear-Clamp Assortment Kits
Part No.
Norma Item
Number
Description
2-Ear Clamp
Assortment
10100130 0821 0308 023
Pack
130 Pieces
Theoretical
Clamping
Range (mm)
Pack
Qty
0709
7.0 - 9.0
20
0911
9.0 - 11.0
20
1113
11.0 - 13.0
20
1315
13.0 - 15.0
20
1518
15.0 - 18.0
20
1720
17.0 - 20.0
10
2023
20.0 - 23.0
10
2327
23.0 - 27.0
10
Catalogue
No.
Theoretical
Clamping
Range (mm)
Pack
Qty
0709
7.0 - 9.0
20
0911
9.0 - 11.0
20
1113
11.0 - 13.0
20
1315
13.0 - 15.0
20
1518
15.0 - 18.0
20
1720
17.0 - 20.0
20
2023
20.0 - 23.0
20
2327
23.0 - 27.0
10
1098i
Pincer
1
Catalogue
No.
2-Ear-Clamp Assortment Kits
Part No.
10100150
Norma Item
Number
0821 0308 024
Description
2-Ear Clamp
Assortment
Pack
150 Pieces
* = Stock limited to current stock only. 132
TST® SWING AIRLINE COUPLINGS SC TST® Swing Airline Coupling SC
The TST® full flow swing coupling is a unique quick connect safety coupling designed to improve the
efficiency and safety of compressed air lines.
TST® Swing Couplings allow unrestricted full air flow and safe, quick connection and disconnection under pressure. The design ensures that connection and disconnection are free of pressure and
compressed air blasts.
It is applicable to various media like compressed air, gases, liquids and media with low to medium
viscosity due to free flow with no restrictions.
A broad product range and an extensive choice of seals and lubricants mean that TST® Couplings are
suitable for many applications throughout various industries.
TST® Swing Couplings: The benefits at a glance
•
Performance: Better Torque: 25% increased output per coupling under full load
•
Speed: Time savings due permanent full flow, which allows for higher rpm’s
•
Reliability: Durable construction Withstands the rigours of heavy usage
•
Safety: Less risk of accidents
•
Zero pressure on connection
•
No whiplash effect on disconnection
•
No power loss - even with reduced system pressure
•
In accordance with safety standard ISO 4414, EN 983
•
Ergonomic: No counter pressure
•
Economical: Permanent full flow reduces energy
costs through elimination of leaks
•
Simplicity: Simple operation, no force required
•
Easy to clean
Application
Throughout media: Compressed air, gases, liquids and media with low to medium viscosity due to free
flow with no restrictions.
Pressure
Operating pressure up to 360 psi (25 bar) - connection and disconnection up to 200 psi (15 bar) also suitable for technical vacuums up to approximately 3 inHg (100 mbar).
Temperature
Standard model from -20º to +100ºC (-4º to +212ºF). Higher temperatures possible depending upon
media with the use of FPM or EPDM seals.
133
TST® COUPLERS
The TST® Swing Coupling minimizes pressure loss and offers a flow rate up to
60% higher than a standard airline coupling. The TST® SC swing coupling has a
unique two stage self venting system that expels the air from the down stream
line preventing any hose whip and insuring a safe working environment. TST®
swing couplings are available in nominal sizes DN6, DN8, and DN11.
They are compatible with most popular plug systems. The SC coupling has a
operating pressure up to 25 bar and a disconnection pressure up to 15 bar and
is also suitable for technical vacuums up to 100 mbar. The SC Coupling has an
operating temperature of -20 Deg to + 100 Deg C. Higher temperatures and
pressures are obtainable through the use of different seals.
TST® Swing Couplings - with female thread
134
Type
Part No.
Item Number
Description/Series
BSP Thread inches
CF
205 00 287
0821 0350 063
*Coupling female thread/DN6-A1
1/4
CF
205 00 115
0821 0350 015
Coupling female thread/DN8-E1
1/4
CF
205 00 116
0821 0350 016
3/8
CF
205 00 117
0821 0350 017
1/2
CF
205 00 018
0821 0350 001
* Coupling female thread/DN8-D
1/4
CF
205 00 019
0821 0350 002
3/8
CF
205 00 020
0821 0350 003
1/2
CF
205 00 345
0821 0350 045
*Coupling female thread/DN8-C
1/4
CF
205 00 133
0821 0350 025
Coupling female thread/DN11-G
1/2
CF
205 00 134
0821 0350 026
Coupling female thread/DN11-G
3/4
CF
205 00 104
0821 0350 014
*Coupling female thread/DN11-H
1/2
CF
205 00 105
0821 0350 067
*Coupling female thread/DN11-H
3/4
TST® COUPLERS
TST® Swing Couplings - with male thread
Type
Part No.
Item Number
CM
205 00 294
0821 0350 065
CM
205 00 121
0821 0350 018
CM
205 00 122
0821 0350 019
CM
205 00 123
0821 0350 020
CM
205 00 053
0821 0350 010
CM
205 00 021
0821 0350 004
CM
205 00 022
0821 0350 005
CM
205 00 351
0821 0350 061
CM
205 00 353
0821 0350 047
CM
205 00 135
0821 0350 027
CM
205 00 136
0821 0350 028
CM
205 00 137
0821 0350 029
CM
205 00 107
0821 0350 068
Description
Series
Hose
BSP
Stem
Thread
mm/
inches
inch
*Coupling male thread/
DN6-A1
Coupling male thread/
DN8-E1
DN8-E1
DN8-E1
* Coupling male thread/
DN8-D
DN8-D
DN8-D
DN8-C
DN8-C
DN11-G
DN11-G
DN11-G
*Coupling male thread/
DN11-H
1/4
1/4
3/8
1/2
1/4
3/8
1/2
NOTE : Items with ‘*’ asterick
D = Nitto compatible
1/4
C = Cejn 320, 321, 322 compatible,
1/2
A1=Cejn 300 & Aro 210 compatible,
3/8
H=C
ejn 550 & Aro 23104,
23204 compatible
1/2
3/4
1/2
TST® Swing Couplings - with female thread
Item Number
Description
Series
Hose Stem
mm/inch
Type
Part No.
CS
205 00 302
0821 0350 064 *Coupling - hose stem/DN6-A1 10mm 3/8"
CS
205 00 126
0821 0350 054 Coupling - hose stem/DN8-E1 8mm 5/16"
CS
205 00 127
CS
205 00 128
CS
205 00 054
0821 0350 051 *Coupling - hose stem/DN8-D
8mm 5/16"
CS
205 00 055
10mm 3/8"
CS
205 00 056
13mm 1/2"
CS
205 00 357
0821 0350 048 *Coupling - hose stem/DN8-C
10mm 3/8"
CS
205 00 358
0821 0350 049 *Coupling - hose stem/DN8-C
13mm 1/2"
135
TST® COUPLERS
TST® Swing Couplings - with PUR compression fitting
Type
Part No.
Item Number
Description
Series
CC
205 00 058
0821 0350 012
*Coupling - with
PUR/DN8-D
Suit
Tube
8 x 12
Hose
Stem
mm/
inch
NOTE : Items with ‘*’ asterick D = Nitto compatible C = Cejn 320, 321, 322 compatible
TST® Swing Couplings - adaptor with male thread
Type
Part No.
Item Number
Description
Series
BSP
Thread
inches
AM
255 00 101
0821 0351 021
Adaptor male
thread/DN8-E1
1/4
AM
255 00 032
0821 0351 000
* Adaptor male
thread/DN8-D
1/4
AM
255 00 034
0821 0351 002
* Adaptor male
thread/DN8-D
1/2
AM
255 00 132
0821 0351 030
Adaptor male
thread/DN11-G
1/2
TST® Swing Couplings - adaptor with female thread
136
Type
Part No.
Item Number
Description
Series
BSP
Thread
inches
AF
255 00 035
0821 0351 003
*Adaptor female thread/
DN8-D
1/4
AF
255 00 036
0821 0351 004
DN8-D
3/8
AF
255 00 037
0821 0351 005
DN8-D
1/2
TST® COUPLERS
TST® Swing Couplings - adaptor with hose stem
Item Number
Description
Series
Hose Stem mm/
inch
Type
Part No.
HS
255 00 107
0821 0351 038 Adaptor with hose stem/DN8-E1
8mm 5/16"
HS
255 00 108
10mm 3/8"
HS
255 00 109
13mm 1/2"
HS
255 00 110
16mm 5/8"
HS
255 00 038
0821 0351 035 *Adaptor with hose stem/DN8-D
8mm 5/16"
HS
255 00 039
10mm 3/8"
HS
255 00 040
13mm 1/2"
HS
255 00 030
0821 0351 046 *Adaptor with hose stem/DN8-C
10mm 3/8"
HS
255 00 031
0821 0351 047 *Adaptor with hose stem/DN8-C
13mm 1/2"
HS
255 00 140
0821 0351 032 Adaptor with hose stem/DN11-G
10mm 3/8"
HS
255 00 141
13mm 1/2"
HS
255 00 142
16mm 5/8"
137
normaconnect®
FGR
FGR pipe couplings provide an economic
alternative to conventional pipe joining
techniques for plastic and metal pipes.
Plain-end pipes are joined in no time.
139
NORMACONNECT® FGR Pipe Couplings Features
1. Double-lip Sealing System
The patented double lip seal (Fig. A) of the
NORMACONNECT® pipe connection offers double
safety; it provides maximum tightness at both low
and high operating pressures.
When the bolts are tightened sealing lip 1 is
pressed on sealing lip 2 in such a way that also at
low system pressures (gas) at vacuum or at high
loads acting on the joint an excellent sealing effect
is achieved (Fig. B).
Due to the special design of the sealing lips the
sealing effect is even stronger when the internal
pressure rises. With the increasing system
pressure (P) the sealing lips are pressed more
firmly onto the pipe surface (Fig. C).
2. Standard Strip Insert: All NORMACONNECT® pipe couplings are factory equipped with the
standard strip insert. The strip insert protects the sealing sleeve from increased mechanical and chemical
loads. It also prevents the sealing sleeve from moisture expansion and allows larger gaps between the
pipe ends to be connected. Furthermore, it allows larger angular deflections and misalignment. With the
strip insert the couplings can also be used for both vacuum and high pressure applications without any
problems. The strip inserts are made from plastic material or Stainless Steel
and should be chosen depending on the application and the pipe material.
3. Heavy-duty Lock Bars: For NORMACONNECT® pipe couplings we use lock bars with a larger
diameter. Thus the rigidity of the coupling is increased and the engagement of the threaded end of the
locking bolts is considerably improved.
4. Anchoring Ring with conically stamped teeth: The anchoring ring with conically stamped
teeth indents into the pipe surface and provides safe and stong axial restraint. Owing to the special
design the coupling is able to withstand even high vibration loads.
5. Protection Ring: The protection ring (cf. FLEX / FLEX E) protects the sealing sleeve from UV rays,
fire, etc. and increases the flexural strength of the coupling.
140
NORMACONNECT® FGR Pipe Couplings
NORMACONNECT® Pipe Couplings require no special tools or pipe-end treatment. Flexible, Lightweight,
304 or 316 Stainless Steel construction. The NORMACONNECT® Pipe Coupling design allows for pipemisalignment, will give a reliable seal, allows for 2° angular deflection, vibration or a small gap between
pipe ends. The Norma Pipe Couplings are manufactured in Germany and are used in Shipbuilding,
Wastewater Treatment, Compressed Air, General Industry and Construction. New installations, system
alterations or repairs, NORMACONNECT® will replace the use of welded, flanged, threaded or grooved
type pipe joints. NORMACONNECT® Pipe Couplings are the easiest and most cost effective way to join
plain ended pipes. Available in diameters from 26.9 to 2032mm, for system working pressures up to 70*
bar. (*Maximum allowable working pressure rating varies according to pipe diameter).
SHIPBUILDING APPLICATION
WASTE WATER APPLICATION
Example for an
order code:
NC
FLEX E
W4
76,1
NBR
EPDM
Meaning of letters
and numbers:
NORMACONNECT
Type
Material
Ø
seal
seal
141
NORMACONNECT® MATERIALS
Type W2
FLEX & FLEX E
GRIP & GRIP E
PLAST GRIP
COMBI GRIP
Housing
304
304
304
304
Bolts
4140 H
4140 H
4140 H
4140 H
Trunnions
12 L 14
12 L 14
12 L 14
12 L 14
Protection ring
316 Ti
-
-
-
Anchoring ring*
-
301
-
301
Anchoring ring 2*
-
-
New Silver/Brass
New Silver/Brass
Strip insert
Grivory/316 Ti
Grivory/316 Ti
Grivory/316 Ti
Grivory/316 Ti
* NORMACONNECT® CG has 2 different anchoring rings (1x for the metal pipe, 1x for the plastic pipe)
Type W4
FLEX & FLEX E
GRIP & GRIP E
Type
FLEX & FLEX E
GRIP & GRIP E
Housing
304
304
Bolts
316 L
316 L
Trunnions
304
304
PLAST GRIP
COMBI GRIP
Protection ring
316 Ti
-
Anchoring ring*
-
301
Anchoring ring 2*
-
-
Strip insert
Grivory/316 Ti
Grivory/316 Ti
Type W5
FLEX & FLEX E
GRIP & GRIP E
PLAST GRIP
COMBI GRIP
REP E
Type
FLEX & FLEX E
GRIP & GRIP E
PLAST GRIP & E
COMBI GRIP & E
REP E
Housing
316 Ti
316 Ti
316 Ti
316 Ti
316 Ti
Bolts
316 L
316 L
316 L
316 L
316 L
Trunnions
316
316
316
316
316
Protection ring
316 Ti
-
-
-
-
Anchoring ring*
-
301
-
301
-
Anchoring ring 2*
-
-
New Silver/Brass
New Silver/Brass
-
Strip insert
Grivory/316 Ti
Grivory/316 Ti
Grivory/316 Ti
Grivory/316 Ti
Grivory/316 Ti
* NORMACONNECT CG has 2 different anchoring rings (1x for the metal pipe, 1x for the plastic pipe)
®
142
NORMACONNECT® MATERIALS
NBR
EPDM
Temperature
Resistance
20 °C - +80°C
Ø <170 mm - 30 °C - +125°C
Ø >180 mm - 20 °C - +80°C
Media
Resistance
Water, sea water, mineral oils
lubricants fuels, gas & pressurised air
Water, aqueous lyes, aqueous acids,
alcohols, pressurised air (oil free)
ASSEMBLY TOLERANCES
Up to 35mm distance between Pipe Ends with Pipe Ends with Insert
Up to 3mm Axial Misalignment
2° Angular Deflection in all directions
Up to 60mm Pipeovality
Up to 6mm Outer diameter pipe difference
143
NORMACONNECT® FLEX E Pipe Coupling W5
NORMACONNECT® Pipe Couplings require no special tools or pipe-end
treatment. Flexible, Lightweight, 316 Stainless Steel construction. Available in
diameters from 26.9 to 2032mm, for system working pressures up to 70* bar.
(*Maximum allowable working pressure rating varies according to pipe diameter).
PN/
Ø O.D.
Industrial
Order
MAWP
mm
WP (bar)
Reference*
bar
70
NC FLEX E W5 26.9
26.9
0582 8600 026
0582 9300 026
3
Housing
Wall
Thickn.
1.0 mm
28.0
70
NC FLEX E W5 28.0
0582 8600 028
0582 9300 028
3
1.0 mm
30.0
70
NC FLEX E W5 30.0
0582 8600 030
0582 9300 030
3
1.0 mm
33.7
60
NC FLEX E W5 33.7
0582 8600 033
0582 9300 033
3
1.0 mm
35.0
60
NC FLEX E W5 35.0
0582 8600 035
0582 9300 035
8
1.2 mm
38.0
60
NC FLEX E W5 38.0
0582 8600 038
0582 9300 038
8
1.2 mm
42.4
50
NC FLEX E W5 42.4
0582 8600 042
0582 9300 042
8
1.2 mm
44.5
50
NC FLEX E W5 44.5
0582 8600 044
0582 9300 044
8
1.2 mm
48.3
50
NC FLEX E W5 48.3
0582 8600 048
0582 9300 048
8
1.2 mm
Computer reference
NBR
EPDM
Pipe
Gap mm
54.0
50
NC FLEX E W5 54.0
0582 8600 054
0582 9300 054
17
1.2 mm
57.0
50
NC FLEX E W5 57.0
0582 8600 057
0582 9300 057
17
1.2 mm
60.3
40
NC FLEX E W5 60.3
0582 8600 060
0582 9300 060
17
1.2 mm
73.0
40
NC FLEX E W5 73.0
0582 8600 073
0582 9300 073
25
1.5 mm
76.1
84.0
16
35
NC FLEX E W5 76.1
0582 8600 076
0582 9300 076
25
1.5 mm
35
NC FLEX E W5 84.0
0582 8600 084
0582 9300 084
25
1.5 mm
88.9
35
NC FLEX E W5 88.9
0582 8600 088
0582 9300 088
25
1.5 mm
101.6
35
NC FLEX E W5 101.6 0582 8600 101
0582 9300 101
25
1.5 mm
104.0
35
NC FLEX E W5 104.0 0582 8600 104
0582 9300 104
25
1.5 mm
108.0
35
NC FLEX E W5 108.0 0582 8600 108
0582 9300 108
25
1.5 mm
110.0
35
NC FLEX E W5 110.0 0582 8600 110
0582 9300 110
25
1.5 mm
114.3
35
NC FLEX E W5 114.3 0582 8600 114
0582 9300 114
25
1.5 mm
129.0
32
NC FLEX E W5 129.0 0582 8600 129
0582 9300 129
35
1.5 mm
133.0
32
NC FLEX E W5 133.0 0582 8600 133
0582 9300 133
35
1.5 mm
139.7
32
NC FLEX E W5 139.7 0582 8600 139
0582 9300 139
35
1.5 mm
141.6
32
NC FLEX E W5 141.0 0582 8600 141
0582 9300 141
35
1.5 mm
144.0
32
NC FLEX E W5 144.0 0582 8600 144
0582 9300 144
35
1.5 mm
154.0
32
NC FLEX E W5 154.0 0582 8600 154
0582 9300 154
35
1.5 mm
159.0
32
NC FLEX E W5 159.0 0582 8600 159
0582 9300 159
35
1.5 mm
168.3
32
NC FLEX E W5 168.3 0582 8600 168
0582 9300 168
35
1.5 mm
Other dimensions and/or materials are available on request, please contact NORMA PACIFIC for further details.
144
W5
NORMACONNECT® GRIP E Pipe Coupling W5
NORMACONNECT® Pipe Couplings require no special tools or pipe-end treatment.
Flexible, Lightweight, 316 Stainless Steel construction. Available in diameters
from 26.9 to 2032mm, for system working pressures up to 70* bar. (*Maximum
allowable working pressure rating varies according to pipe diameter).
PN/
Ø O.D.
Industrial
Order
MAWP
mm
WP (bar)
Reference*
bar
26.9
70
NC GRIP E W5 26.9
0579 8600 026
0579 9300 026
Pipe
Gap
mm
3
28.0
70
NC GRIP E W5 28.0
0579 8600 028
0579 9300 028
3
1.0 mm
30.0
70
NC GRIP E W5 30.0
0579 8600 030
0579 9300 030
3
1.0 mm
33.7
60
NC GRIP E W5 33.7
0579 8600 033
0579 9300 033
3
1.0 mm
35.0
60
NC GRIP E W5 35.0
0579 8600 035
0579 9300 035
8
1.2 mm
38.0
60
NC GRIP E W5 38.0
0579 8600 038
0579 9300 038
8
1.2 mm
42.4
50
NC GRIP E W5 42.4
0579 8600 042
0579 9300 042
8
1.2 mm
44.5
50
NC GRIP E W5 44.5
0579 8600 044
0579 9300 044
8
1.2 mm
48.3
50
NC GRIP E W5 48.3
0579 8600 048
0579 9300 048
8
1.2 mm
54.0
50
NC GRIP E W5 54.0
0579 8600 054
0579 9300 054
17
1.2 mm
57.0
50
NC GRIP E W5 57.0
0579 8600 057
0579 9300 057
17
1.2 mm
60.3
40
NC GRIP E W5 60.3
0579 8600 060
0579 9300 060
17
1.2 mm
73.0
40
NC GRIP E W5 73.0
0579 8600 073
0579 9300 073
25
1.5 mm
76.1
35
NC GRIP E W5 76.1
0579 8600 076
0579 9300 076
25
1.5 mm
80.0
35
NC GRIP E W5 80.0
0579 8600 080
0579 9300 080
25
1.5mm
35
NC GRIP E W5 84.0
0579 8600 084
0579 9300 084
25
1.5 mm
88.9
35
NC GRIP E W5 88.9
0579 8600 088
0579 9300 088
25
1.5 mm
101.6
35
NC GRIP E W5 101.6 0579 8600 101
0579 9300 101
25
1.5 mm
104.0
35
NC GRIP E W5 104.0 0579 8600 104
0579 9300 104
25
1.5 mm
108.0
35
NC GRIP E W5 108.0 0579 8600 108
0579 9300 108
25
1.5 mm
110.0
35
NC GRIP E W5 110.0 0579 8600 110
0579 9300 110
25
1.5 mm
114.3
35
NC GRIP E W5 114.3 0579 8600 114
0579 9300 114
25
1.5 mm
129.0
32
NC GRIP E W5 129.0 0579 8600 129
0579 9300 129
35
2.5mm
133.0
32
NC GRIP E W5 133.0 0579 8600 133
0579 9300 133
35
2.5 mm
139.7
32
NC GRIP E W5 139.7 0579 8600 139
0579 9300 139
35
2.5 mm
141.6
32
NC GRIP E W5 141.6 0579 8600 141
0579 9300 141
35
2.5 mm
144.0
32
NC GRIP E W5 144.0 0579 8600 144
0579 9300 144
35
2.5 mm
154.0
32
NC GRIP E W5 154.0 0579 8600 154
0579 9300 154
35
2.5 mm
159.0
32
NC GRIP E W5 159.0 0579 8600 159
0579 9300 159
35
2.5 mm
168.3
32
NC GRIP E W5 168.3 0579 8600 168
0579 9300 168
35
2.5 mm
20.0
NC GRIP E W5 219.1 0574 8600 219
0574 8300 219
35
2.5 mm
84.0
219.1
16
10.0
Computer reference
NBR
EPDM
Housing
Wall
Thickn.
1.0 mm
W5
Other dimensions and/or materials are available on request, please
contact NORMA PACIFIC for further details.
145
NORMACONNECT® GRIP E FP
(FLAME PROTECTED) PIPE COUPLINGS W5
NORMACONNECT® GRIP E-FP pipe couplings with integrated flame protection
are used with applications in the marine sector (civil and military) as well as in
sprinkler systems. For this purpose the GRIP E type has been equipped with an
additional housing made from Stainless Steel plus a fire-resistant lining which can
resist temperatures of up to 850°C / 1.562°F.
PN/
Ø O.D.
MAWP
mm
bar
Computer reference
EPDM
Pipe
Gap
mm
Housing
Wall
Thickn.
0579 8670 026
0579 9370 026
3
1.0 mm
0579 8670 028
0579 9370 028
3
1.0 mm
NC GRIP E FP W5 30.0
0579 8670 030
0579 9370 030
3
1.0 mm
10
0579 8670 033
0579 9370 033
3
1.0 mm
35.0
10
0579 8670 035
0579 9370 035
8
1.2 mm
38.0
10
0579 8670 038
0579 9370 038
8
1.2 mm
42.4
10
0579 8670 042
0579 9370 042
8
1.2 mm
44.5
10
0579 8670 044
0579 9370 044
8
1.2 mm
48.3
10
0579 8670 048
0579 9370 048
8
1.2 mm
54.0
10
0579 8670 054
0579 9370 054
17
1.2 mm
PACK
SIZE
Order
Reference*
NBR
26.9
10
28.0
10
30.0
10
33.7
57.0
10
0579 8670 057
0579 9370 057
17
1.2 mm
60.3
10
0579 8670 060
0579 9370 060
17
1.2 mm
73.0
10
0579 8670 073
0579 9370 073
25
1.5 mm
76.1
88.9
16
10
0579 8670 076
0579 9370 076
25
1.5 mm
10
0579 8670 088
0579 9370 088
25
1.5 mm
101.6
10
0579 8670 101
0579 9370 101
25
1.5 mm
104.0
10
0579 8670 104
0579 9370 104
25
1.5 mm
108.0
10
0579 8670 108
0579 9370 108
25
1.5 mm
110.0
10
0579 8670 110
0579 9370 110
25
1.5 mm
114.3
10
0579 8670 114
0579 9370 114
25
1.5 mm
118.0
5
0579 8670 118
0579 9370 118
25
1.5 mm
129.0
5
0579 8670 129
0579 9370 129
35
2.5mm
133.0
5
0579 8670 133
0579 9370 133
35
2.5 mm
139.7
5
0579 8670 139
0579 9370 139
35
2.5 mm
141.6
5
0579 8670 141
0579 9370 141
35
2.5 mm
144.0
5
0579 8670 144
0579 9370 144
35
2.5 mm
154.0
5
0579 8670 154
0579 9370 154
35
2.5 mm
159.0
5
0579 8670 159
0579 9370 159
35
2.5 mm
168.3
219.1
10.0
5
0579 8670 168
0579 9370 168
35
2.5 mm
2
0574 8670 219
0574 8370 219
35
2.5 mm
W5
* Please add NBR or EPDM. Pipe Couplings with Plastic strip insert available on request.. Other dimensions and/or materials are
available on request, please contact NORMA PACIFIC for further details.
146
NORMACONNECT® RFP retrofitable
FLAME PROTECTion FOR FGR COUPLINGS
NORMACONNECT® RFP is a retrofitable flame protection housing that has been
specially designed for use with all NORMACONNECT® FLEX GRIP and REP pipe
couplings. Its low weight and straightforward design allows quick and easy
assembly without any tools and the built-in flame resistant mineral fibre mat
provides a premium level of flame protection.
PN/ Indus.
Ø O.D.
MAWP WP
mm
bar
(bar)
Order
Reference
Computer reference
NBR
EPDM
Pipe
Gap
mm
Pack
QTY
26.9
0573 0000 026
5 pcs
28.0
0573 0000 028
5 pcs
30.0
0573 0000 030
5 pcs
33.7
0573 0000 033
5 pcs
38.0
0573 0000 038
5 pcs
42.4
0573 0000 042
5 pcs
44.5
0573 0000 044
5 pcs
48.3
0573 0000 048
5 pcs
54.0
0573 0000 054
5 pcs
57.0
0573 0000 057
5 pcs
60.3
0573 0000 060
5 pcs
76.1
0573 0000 076
5 pcs
88.9
0573 0000 088
5 pcs
101.6
0573 0000 101
5 pcs
104.0
0573 0000 104
5 pcs
108.0
0573 0000 108
5 pcs
114.4
0573 0000 114
5 pcs
129.0
0573 0000 129
5 pcs
133.0
0573 0000 133
5 pcs
139.7
0573 0000 139
5 pcs
154.0
0573 0000 154
5 pcs
159.0
0573 0000 159
5 pcs
168.3
0573 0000 168
5 pcs
219.1
0573 0000 219
2 pcs
273.0
0573 0000 273
2 pcs
W5
147
NORMACONNECT® COMBI GRIP E Pipe Coupling W5
NORMACONNECT® COMBI GRIP E pipe axial restraint couplings are used
to connect plastic pipes with metal pipes. The coupling features a special
anchoring ring with rows of flat teeth, which are pressed into the pipe surface
without damaging the material when used on plastic pipes. At the same time
the force applied is distributed evenly across the pipe surface. The coupling
also features on the other side an anchoring ring with conically stamped teeth
which grip into the pipe surface when used with metal pipes. Due to the special
design of the anchoring ring the coupling can withstand high vibration loads,
pressures and angular deflection.
PN/MAWP bar = 16
Ø O.D.
mm
Industrial WP (bar) = 16
Order reference*
Computer reference
NBR
EPDM
Pipe
Gap
mm
Housing
Wall
Thickn.
38.0 / 40
NORMA Combi Grip E W5 38.0 / 40
0584 8660 038 0584 9360 038
8
1.2 mm
42.4 / 40
NORMA Combi Grip E W5 42.4/40
0584 8660 042 0584 9360 042
8
1.2 mm
42.4 / 42.4
NORMA Combi Grip E W5 42.4 / 42.4
0584 8660 043 0584 9360 043
8
1.2 mm
44.5 / 44.5
0584 8660 044 0584 9360 044
8
1.2 mm
0584 8660 048 0584 9360 048
8
1.2 mm
48.3 / 48.3
0584 8660 046 0584 9360 046
8
1.2 mm
60.3 / 60.3
0584 8660 061 0584 9360 061
17
1.2 mm
60.3 / 63
0584 8660 060 0584 9360 060
17
1.2 mm
76.1 / 75
0584 8660 076 0584 9360 076
25
1.5 mm
76.1 / 76.1
0584 8660 077 0584 9360 077
25
1.5 mm
88.9 / 88.9
0584 8660 086 0584 9360 086
25
1.5 mm
0584 8660 088 0584 9360 088
25
1.5 mm
0584 8660 108 0584 9360 108
25
1.5 mm
0584 8660 109 0584 9360 109
25
1.5 mm
0584 8660 110 0584 9360 110
25
1.5 mm
0584 8660 114 0584 9360 114
25
1.5 mm
48.3 / 50
88.9 / 90
108.0 / 110
110.0 / 110.0 NORMA Combi Grip E W5 110.0 / 110.0
114.3 / 110
129.0 / 125
0584 8660 129 0584 9360 129
35
2.5 mm
139.7 / 140
0584 8660 139 0584 9360 139
35
2.5 mm
159.0 / 160
0584 8660 159 0584 9360 159
35
2.5 mm
0584 8660 168 0584 9360 168
35
2.5 mm
Other dimensions and/or materials are available on request, please contact NORMA PACIFIC for further details.
148
W5
NORMACONNECT® plast GRIP E Pipe Coupling W5
NORMACONNECT® PLAST GRIP E axial restraint pipe couplings are used to
connect plastic pipes. The specially designed anchoring ring featuring flat
rows of teeth engages into the pipe surface without damaging the plastic
material. The force applied is distributed evenly across the pipe surface.
PN/MAWP bar = 16
NBR
EPDM
Pipe
Gap
mm
NORMA Plast Grip E W5 40
0581 8660 040
0581 9360 040
8
1.2 mm
42.4
0581 8660 042
0581 9360 042
8
1.2 mm
44.5
0581 8660 044
0581 9360 044
8
1.2 mm
48.3
0581 8660 048
0581 9360 048
8
1.2 mm
50.0
0581 8660 050
0581 9360 050
8
1.5 mm
60.3
0581 8660 060
0581 9360 060
17
1.5 mm
63.0
0581 8660 063
0581 9360 063
17
1.5 mm
75.0
0581 8660 075
0581 9360 075
25
1.5 mm
76.1
0581 8660 076
0581 9360 076
25
1.5 mm
88.9
0581 8660 088
0581 9360 088
25
1.5 mm
90.0
0581 8660 090
0581 9360 090
25
1.5 mm
108.0
0581 8660 108
0581 9360 108
25
1.5 mm
110.0
0581 8660 110
0581 9360 110
25
1.5 mm
114.3
0581 8660 114
0581 9360 114
25
1.5 mm
125.0
0581 8660 125
0581 9360 125
35
2.5 mm
140.0
0581 8660 140
0581 9360 140
35
2.5 mm
159.0
0581 8660 159
0581 9360 159
35
2.5 mm
160.0
0581 8660 160
0581 9360 160
35
2.5 mm
168.3
0581 8660 168
0581 9360 168
35
2.5 mm
Ø O.D.
mm
Order reference*
40.0
Computer reference
Housing
Wall
Thickn.
W5
149
NORMACONNECT® REP E Pipe Coupling W5
NORMACONNECT® REP E are non-restraint repair couplings. They are
used to connect and/or seal damaged metal and plastic pipes. They also
enable repairs to be carried out easily, quickly and safely without the need
to dismantle the pipes.
PN/MAWP bar = 16
150
NBR
EPDM
Pipe
Gap
mm
NORMA Rep E W5 35.0
0572 8660 035
0572 9360 035
8
1. 2 mm
38.0
NORMA Rep E W5 38.0
0572 8660 038
0572 9360 038
8
1. 2 mm
42.4
NORMA Rep E W5 42.4
5728 6600 042
0572 9360 042
8
1. 2 mm
44.5
NORMA Rep E W5 44.5
0572 8660 044
0572 9360 044
8
1. 2 mm
48.3
NORMA Rep E W5 48.3
0572 8660 048
0572 9360 048
8
1. 2 mm
54.0
NORMA Rep E W5 54.0
0572 8660 054
0572 9360 054
17
1. 2 mm
57.0
NORMA Rep E W5 57.0
0572 8660 057
0572 9360 057
17
1. 2 mm
60.3
NORMA Rep E W5 60.3
0572 8660 060
0572 9360 060
17
1. 2 mm
70.0
NORMA Rep E W5 70.0
0572 8660 070
0572 9360 070
25
1. 2 mm
73.0
NORMA Rep E W5 73.0
0572 8660 073
0572 9360 073
25
1.5 mm
76.1
NORMA Rep E W5 76.1
0572 8660 076
0572 9360 076
25
1.5 mm
78.0
NORMA Rep E W5 78.0
0572 8660 078
0572 9360 078
25
1.5 mm
84.0
NORMA Rep E W5 84.0
0572 8660 084
0572 9360 084
25
1.5 mm
88.9
NORMA Rep E W5 88.9
0572 8660 0088
0572 9360 088
25
1.5mm
Ø O.D.
mm
Order reference*
35.0
Computer reference
Housing
Wall
Thickn.
W5
NORMACONNECT® REP E Pipe Coupling W5
NORMACONNECT® REP E are non-restraint repair couplings. They are
used to connect and/or seal damaged metal and plastic pipes. They also
enable repairs to be carried out easily, quickly and safely without the need
to dismantle the pipes.
Computer reference
NBR
EPDM
Pipe
Gap
mm
NORMA Rep E W5 98,0
0572 8660 098
0572 9360 098
25
1.5 mm
101.6
NORMA Rep E W5 101,6
0572 8660 101
0572 9360 101
25
1.5 mm
104.0
0572 8660 104
0572 9360 104
25
1.5 mm
108.0
0572 8660 108
0572 9360 108
25
1.5 mm
110.0
0572 8660 110
0572 9360 110
25
1.5 mm
114.3
0572 8660 114
0572 9360 114
25
1.5 mm
118.0
0572 8660 118
0572 9360 118
25
1.5 mm
129.0
0572 8660 129
0572 9360 129
35
1.5 mm
133.0
0572 8660 133
0572 9360 133
35
1.5 mm
139.7
0572 8660 139
0572 9360 139
35
1.5 mm
141.6
0572 8660 141
0572 9360 141
35
1.5 mm
144.0
0572 8660 144
0572 9360 144
35
1.5 mm
154.0
0572 8660 154
0572 9360 154
35
1.5 mm
159.0
0572 8660 159
0572 9360 159
35
1.5 mm
168.3
0572 8660 168
0572 9360 168
35
1.5 mm
Ø O.D.
mm
Order reference*
98.0
Housing
Wall
Thickn.
W5
151
152
NE
W!
normaconnect®
DCS
Proven connections for
socketless cast iron drainage
pipes and fittings
153
NORMACONNECT® DCS – Rapid® with block tightening
W2
With many years of proven performance in all types of domestic, commercial and industrial drainage
system applications the NORMACONNECT® DCS range of specialist couplings has an excellent record for
safety and reliability.
There are DCS couplings for both above and below ground applications, and bridge drainage, in diameters
from 40 mm to 600 mm. Features: • Simple and quick assembly and disassembly • Compact design and
construction • Range covers all drainage uses • Versatility • Fast, safe, and economical • Suitable for
tensile strength and non-tensile strength connections • Complete range of accessories
TYPE DCS - Rapid® W2 - Stainless Steel Band
Couplings able to provide axial restraint
154
Diameter
DN
Order reference*
Mat.
Grade
Pack
Quantity
40
245 8134 040
W2
50
50
245 8218 050
W2
100
70
245 8219 070
W2
100
75 F
245 8220 080
W2
100
100
245 8221 100
W2
100
125
245 8222 125
W2
70
150
245 8141 150
W2
50
200
245 8223 150
W2
15
250
245 8224 200
W2
4
NE
W!
NORMACONNECT® DCS – Rapid® with block tightening W5
The NORMACONNECT® DCS range of pipe connections and their compact design stand for the
economic and reliable joining of plain-ended cast iron drainage pipes.
Their scope of application covers building and bridge drainage, private ground drainage and laboratory or
large kitchen sewage. The joining of recovery lines takes little time and is very easy even within a confined
space. Thanks to the variety of types and sizes you will always find a solution for your problem – no matter
if it is for standard or customized applications.
TYPE Rapid® W5 - All Stainless Steel 316
Diameter
DN
Order reference*
Mat.
Grade
Pack
Quantity
40
245 8125 040
W5
50
50
245 8126 050
W5
100
70
245 8127 070
W5
100
75 F
245 8129 075
W5
100
100
245 8130 100
W5
100
125
245 8131 125
W5
70
150
245 8132 150
W5
50
200
245 8133 200
W5
15
250
245 8208 250
W5
4
300
245 8209 300
W5
-
155
NORMACONNECT® DCS TYPE GA - Restraining Collars
W2
NORMACONNECT® COMBI GRIP E pipe axial restraint couplings are used to connect plastic pipes with metal
pipes. The coupling features a special anchoring ring with rows of flat teeth, which are pressed into the pipe
surface without damaging the material when used on plastic pipes.
At the same time the force applied is distributed evenly across the pipe surface. The coupling also features
on the other side an anchoring ring with conically stamped teeth which grip into the pipe surface when used
with metal pipes. Due to the special design of the anchoring ring the coupling can withstand high vibration
loads, pressures and angular deflection.
TYPE DCS - Rapid® W2 - Stainless Steel Band
156
Diameter
DN
Order reference*
Mat.
Grade
Pack
Quantity
40
262 8401 050
W2
--
50
262 8402 070
W2
10
70
262 8403 080
W2
10
75 F
262 8405 100
W2
10
100
262 8406 125
W2
10
125
262 8407 150
W2
5
150
262 8415 200
W2
200
262 8416 250
W2
3
250
262 8417 300
W2
4
NORMACONNECT® DCS - FULL RANGE
NE
W!
The original product for
high quality and reliability.
The complete NORMACONNECT® DCS range
has been proven a million times when used
to achieve both a reliable and economic
connection of socketless drainage pipes. Inside
buildings, in underground carparks, buried
in soil, in purification plants and for drainage
systems inbridges, NORMACONNECT® is the
ideal connecting solution.
A large number of well-known companies have
been using our know-how in the development
and manufacture of pipe connections for many
years. Thus behind many successful brands
enjoying a well established reputation you can
find the certified quality and the reliability of
NORMA® connections. Since the materials for
our products are carefully chosen to match
their applications and operating conditions,
we can assure you that they function safely
for a long time – as you would expect from
a modern piping system.
Variety and operating efficiency.
The NORMACONNECT® FGR range of pipe
connections and their compact design stand
for the economic and reliable joining of plainended cast iron drainage pipes. Furthermore,
they are suitable for connecting plastic and
metal pipes and specially those made of
Stainless Steel. Their scope of application
covers building construction,civil engineering,
plant construction,shipbuilding as well as
water supply and distribution. The joining of
feed and recovery lines for gases, fluids and
solids takes little time and is very easy even
within a confined space. Thanks to the variety
of types and sizes you will always find a
solution for your problem – no matter if it is
for standard or customized applications.
157
158
NE
W!
EPAIR COUPLINGS
RAPID® REPAIR
couplings
159
RAPID® stainless steel REPAIR couplings
The new cost effective pipe repair solution from NORMA®. Our Rapid®
couplings are quick and easy to install, are readily available in Australia and they
save enormous amounts of time as no special tools are required. Rapid® are a
quality, cost effective pipe repair solution. Call us on 1300 CLAMPS to discuss
your pipe repair needs. NORMA® will have the correct solution for you.
RAPID® stainless steel REPAIR
couplings - CR REPAIR CLAMPS ONE PART
PART NO.
RANGE
CR1-0220-06
CR1-0238-06
CR1-0288-06
CR1-0300-06
CR1-0350-06
CR1-0375-08
CR1-0440-08
CR1-0450-08
CR1-0450-12
CR1-0480-08
CR1-0480-12
CR1-0500-08
CR1-0520-08
CR1-0590-08
CR1-0600-08
CR1-0600-12
CR1-0663-08
CR1-0663-12
CR1-0690-08
CR1-0690-12
CR1-0745-08
CR1-0790-08
CR1-0800-08
CR1-0863-08
CR1-0900-08
CR1-0905-08
CR1-1000-12
CR1-1040-12
CR1-1075-12
CR1-1110-12
CR1-1140-12
CR1-1175-12
CR1-1200-12
CR1-1220-12
CR1-1275-12
CR1-1320-12
CR1-1340-16
CR1-1370-16
Size
(mm)
45 - 55
59 - 67
69 - 76
75 - 83
85 - 95
95 - 104
104 - 113
110 - 120
110 - 120
121 - 130
121 - 130
126 - 136
130 - 140
145 - 155
151 - 161
151 - 161
167 - 176
167 - 176
174 - 183
174 - 183
189 - 199
196 - 205
202 - 212
218 - 228
229 - 238
236 - 245
248 - 257
255 - 265
271 - 281
281 - 290
288 - 298
298 - 309
304 - 314
312 - 322
322 - 331
325 - 335
332 - 342
343 - 355
Length
Bolts
M12 X 150
M12 X 150
M12 X 150
M12 X 150
M12 X 150
M12 X 200
M12 X 200
M16 X 200
M16 X 300
M16 X 200
M16 X 300
M16 X 200
M16 X 200
M16 X 200
M16 X 200
M16 X 300
M16 X 200
M16 X 300
M16 X 200
M16 X 300
M16 X 200
M16 X 200
M16 X 200
M16 X 200
M16 X 200
M16 X 200
M16 X 300
M16 X 300
M16 X 300
M16 X 300
M16 X 300
M16 X 300
M16 X 300
M16 X 300
M16 X 300
M16 X 300
M16 X 400
M16 X 400
X2
X2
X2
X2
X2
X2
X2
X2
X3
X2
X3
X2
X2
X2
X2
X3
X2
X3
X2
X3
X2
X2
X2
X2
X2
X2
X3
X3
X4
X4
X4
X4
X4
X4
X4
X4
X5
X5
RAPID® stainless steel REPAIR couplings CR REPAIR CLAMPS TWO & THREE PART
PART NO.
RANGE
CR2-250/270-16
CR2-270/290-16
CR2-290/310-16
CR2-310/330-16
CR2-330/350-16
CR2-350/370-16
CR2-370/390-16
CR2-390/410-16
CR2-420/440-16
CR2-450/470-16
CR2-480/500-16
CR2-490/510-16
CR2-510/530-16
CR2-550/570-16
CR2-580/600-16
CR2-600/620-16
CR2-620/640-16
CR3-560/590-16
CR3-650/680-16
CR3-690/715-16
CR3-720/750-16
CR3-775/805-16
Size
(mm)
250 - 270
270 - 290
290 - 310
310 - 330
330 - 350
350 - 370
370 - 390
390 - 410
420 - 440
450 - 470
480 - 500
490 - 510
510 - 530
550 - 570
580 - 600
600 - 620
620 - 640
560 - 590
650 - 680
690 - 720
720 - 750
775 - 805
Length
Bolts
M16 X 400
M16 X 400
M16 X 400
M16 X 400
M16 X 400
M16 X 400
M16 X 400
M16 X 400
M16 X 400
M16 X 400
M16 X 400
M16 X 400
M16 X 400
M16 X 400
M16 X 400
M16 X 400
M16 X 400
M16 X 400
M16 X 400
M16 X 400
M16 X 400
M16 X 400
X 10
X 10
X 10
X 10
X 10
X 10
X 10
X 10
X 10
X 10
X 10
X 10
X 10
X 10
X 10
X 10
X 10
X 15
X 15
X 15
X 15
X 15
EPAIR COUPLINGS
160
OTHER SIZES AND LENGTHS AVAILABLE - call us on 1300 clamps
Available Clamp Lengths (mm)
Nominal
Pipe
Size
Outside
Diameter
Range
(mm)
45 - 55
CR1-0220-(X) 08230350 000
50 mm
59 - 67
CR1-0238-(X) 08230350 001
75 mm
100 mm
125 mm
150 mm
180 mm
200 mm
225 mm
250 mm
300 mm
350 mm
Part Number/
Length Code
NE
W!
Part Number 150mm 200mm 300mm 400mm 600mm
69 - 76
CR1-0288-(X) 08230350 002
75 - 83
CR1-0300-(X)
85 - 95
CR1-0350-(X) 08230350 003
95 - 104
CR1-0375-(X)
104 - 113
CR1-0440-(X)
113 - 120
CR1-0450-(X) 08230350 004
121 - 130
CR1-0480-(X)
126 - 136
CR1-0500-(X)
130 - 140
CR1-0520-(X)
145 - 155
CR1-0590-(X)
151 - 161
CR1-0600-(X)
167 - 176
CR1-0663-(X) 08230350 005
174 - 183
CR1-0690-(X)
179 - 189
CR1-0710-(X)
189 - 199
CR1-0745-(X)
196 - 205
CR1-0790-(X)
202 - 212
CR1-0800-(X)
218 - 228
CR1-0863-(X) 08230350 006
229 - 238
CR1-0900-(X)
236 - 245
CR1-0905-(X)
248 - 257
CR1-1000-(X)
255 - 265
CR1-1040-(X)
271 - 281
CR1-1075-(X)
281 - 290
CR1-1110-(X)
288 - 298
CR1-1140-(X)
298 - 309
CR1-1175-(X)
304 - 314
CR1-1200-(X)
312 - 322
CR1-1220-(X)
322 - 331
CR1-1275-(X)
332 - 342
CR1-1340-(X)
343 - 355
CR1-1370-(X)
356 - 366
CR1-1400-(X)
(X=06)
(X=08)
(X=12)
(X=16)
(X=24)
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
161
RAPID® Sewer OB Junction Clamps (CBJ)
Rapid® Sewer OB Junction clamps are made from 316 Stainless Steel, they are ideally suited for new or
damaged property connections on non-pressure sewer pipelines designed for a permanent sewer branch.
They are made to provide the same quick-and-easy Rapid® fitting qualities. All of the Rapid® Sewer Junction
Clamps are made using AS 4181 requirements* and in accordance with ISO 9001 quality standards.
They provide a simple and permanent way of connecting branch off-takes to new, broken, and renewed/
re-lined sewer pipes. The standard sewer clamps come with the offtake branch at 45 degrees, and has
an PVC access coupling secured to it for solvent welded connections to uPVC pipes. The sewer clamps
are made to adapt to pipe ovality and irregularities. With a fully lined rubber gasket, damaged pipes can be
easily rehabilitated. Sizes range from DN 150 to DN 600mm, with off takes sizes DN 100 and DN 150mm.
(Depending on host pipe) Operating pressure from -80kPA to 100kPA. Max. temp. 60 degrees C.
RAPID® COMMON RAPID® OB SEWER CLAMPS
PART NO.
OD
RANGE
DESCRIPTION
CBJ-160/170-100 160 - 170
OB SS316 CLAMP 160 to 170 x 100 x 45 PVC
CBJ-160/165-150 160 - 165
CBJ-175/185-100 175 - 185
CBJ-175/180-150 175 - 180
CBJ-190/210-100 190 - 210
CBJ-190/210-150 190 - 210
CBJ-225/245-100 225 - 245
CBJ-225/245-150 225 - 245
CBJ-250/270-100 250 - 270
CBJ-250/270-150 250 - 270
CBJ-270/290-100 270 - 290
CBJ-270/290-150 270 - 290
CBJ-310/330-100 310 - 330
CBJ-310/330-150 310 - 330
OTHER SIZES AND LENGTHS AVAILABLE - call us on 1300 clamps
162
EPAIR COUPLINGS
RAPID® JUNIOR FULL CIRCLE & HALF SS CLAMPS
W2
NE
W!
Designed for use with pipelines from 15-63mm, Rapid’s range of Junior Clamps are suitable to be used for
repairing pin-hole leaks in pipes, or larger breaks. The Junior Clamps have lengths of 80mm or 150mm and
are available in the half circle style, designed for pin-hole leaks, or full circle style, used for larger leaks.
Jnr Clamp Full Circle Gasket GaL. Pipe
Nominal Outside
Pipe Size Diameter
Part Number
Length
Weight
15mm
21.3mm CFW 15mm G-3
75mm
0.25 kgs
15mm
21.3mm CFW 15mm G-6 150mm
0.5 kgs
20mm
26.7mm CFW 20mm G-3
0.27 kgs
20mm
26.7mm CFW 20mm G-6 150mm 0.54 kgs
25mm
33.4mm CFW 25mm G-3
Jnr Clamp Full Circle Gasket Copper Pipe
Nominal Outside
Pipe Size Diameter
Part Number
Length Weight
15mm
12.7mm CFW 15mmC-3 75mm 0.22 kgs
15mm
12.7mm CFW 15mmC-6 150mm 0.44 kgs
20mm
19.05mm CFW 20mmC-3 75mm 0.25 kgs
0.29 kgs
20mm
19.05mm CFW 20mmC-6 150mm 0.5 kgs
25mm
33.4mm CFW 25mm G-6 150mm 0.58 kgs
25mm
32mm
42.2mm CFW 32mm G-3
75mm
0.35 kgs
25mm
25.4mm CFW 25mmC-6 150mm 0.54 kgs
32mm
42.2mm CFW 32mm G-6 150mm
0.7 kgs
32mm
31.75mm CFW 32mmC-3 75mm 0.29 kgs
32mm
31.75mm CFW 32mmC-6 150mm 0.54 kgs
40mm
40mm
38.1mm CFW 40mmC-6 150mm 0.66 kgs
75mm
75mm
Jnr Clamp Half Circle Gasket Gal. Pipe
Nominal Outside
Pipe Size Diameter Part Number
Length
Weight
15mm
21.3mm
CFC-084-03
75mm
0.21kgs
15mm
21.3mm
CFC-084-06
150mm
0.42 kgs
20mm
26.7mm
CFC-105-03
75mm
0.22 kgs
20mm
26.7mm
CFC-105-06
150mm
0.44 kgs
25mm
33.4mm
CFC-132-03
75mm
0.23 kgs
25mm
33.4mm
CFC-132-06
150mm
0.46 kgs
32mm
42.2mm
CFC-160-03
75mm
0.24 kgs
32mm
42.2mm
CFC-160-06
150mm
0.48 kgs
40mm
48.3mm
CFC-190-03
75mm
0.43 kgs
40mm
48.3mm
CFC-190-06
150mm
0.86 kgs
50mm
60.3mm
CFC-238-03
75mm
0.44 kgs
50mm
60.3mm
CFC-238-06
150mm
0.88 kgs
65mm
73.0mm
CFC-300-03
75mm
0.50 kgs
65mm
73.0mm
CFC-300-06
150mm
1.00 kgs
75mm
88.9mm
CFC-350-03
75mm
0.53 kgs
75mm
88.9mm
CFC-350-06
150mm
1.06 kgs
100mm
114.3mm CFC-450-03
75mm
0.64 kgs
100mm
114.3mm CFC-450-06
150mm
1.28 kgs
EPAIR COUPLINGS
163
RAPID® CT TAPPING SADDLES Range (lip seal, fully rubber lined)
The new cost effective pipe repair solution from NORMA®. Larger pipe sizes available on request
Tapping Saddle width DN15-DN25mm BSP = 130mm, DN32-DN50mm BSP = 150mm
Material : 316 Stainless Steel
164
Normal Pipe
Size Inch mm
Suit Pipe Outside
Dia Range (mm)
Part Number. Lip
Seal Full Rubber
Lining
3” 75 mm
75-90
CT2-75/90 x X
3” 75 mm
88-108
CT2-88/108 x X
4” 100 mm
110-135
CT2-110/135 x X
5” 125 mm
135-160
CT2-135/160 x X
6” 150 mm
160-190
CT2-160/190 x X
7” 175 mm
190-220
CT2-190/220 x X
8” 200 mm
210-240
CT2-210/240 x X
9” 225 mm
240-270
CT2-240/270 x X
10” 250 mm
270-300
CT2-270/300 x X
11” 275 mm
300-330
CT2-300/330 x X
12” 300 mm
330-360
CT2-330/360 x X
13” 350 mm
360-390
CT2-360/390 x X
14” 375 mm
390-420
CT2-390/420 x X
15” 375 mm
420-450
CT2-420/450 x X
16” 400 mm
450-480
CT2-450/480 x X
18” 450 mm
490-520
CT2-490/520 x X
Available Clamp Lengths (mm)
3/4”
1’’
11/4”
11/2”
2’’
(20mm) (25mm) (32mm) (40mm) (50mm)
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
EPAIR COUPLINGS
NE
W!
RAPID® FLANGED OFFTAKE REPAIR CLAMPS
The new cost effective pipe repair solution from NORMA®. Our Rapid® couplings are quick and easy to
Clamps to suit OD’s
FLANGED OFFTAKES
Sizes
through to
Sizes
Table D
80 mm
Table D
100 mm
Table D
150 mm
Table D
200 mm
100mm
–
150mm
150mm
–
200mm
200mm
–
250mm
250mm
–
300mm
300mm
–
350mm
350mm
–
400mm
400mm
–
450mm
450mm
–
500mm
500mm
–
550mm
550mm
–
600mm
600mm
–
650mm
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
RAPID® other products
The new cost effective pipe repair solution from NORMA®. Our Rapid® couplings are quick and easy to
install, are readily available in Australia and they save enormous amounts of time as no special tools are
required. Rapid® are a quality, cost effective pipe repair solution. Call us on 1300 CLAMPS to discuss your
pipe repair needs. NORMA® will have the correct solution for you.
EPAIR COUPLINGS
165
additional
information
167
ADDITIONAL INFORMATION
FUEL LINE CLIPS
NORMACLAMP® FUEL SL Series Screw Clips ideal for use
on both high & low pressure hose applications. The noperforated band eliminates any risk of damage to the hose,
and all sizes will close to a perfect circle, while the uniform
circumferential pressure obtained ensures maximum
sealing efficiency. The one-piece clip features a special nut
which is retained in the clip so that it cannot be lost.
Available in W1 Zinc Plated material grade and in sizes
7-9mm through to 19-21mm diameter.
NORMACLAMP® CONSTANT TENSION WDHC W/SPRING
NORMACLAMP® TORRO® With Constant Tension Spring. This design includes a constant tension spring positioned
on the inner side of the band. When the Torro Clamp is
tightened this radially positioned spring, roughly 2mm thick
is pre-stressed. After installation the stored spring energy
assures a continuous, self-acting tightening effect. This
design allows the clamp to compensate for temperature
fluctuations. In cold conditions the hose will shrink thus
the clamp will expand, and in hot conditions the hose will
expand and the clamp will contract.
NORMACLAMP® CONSTANT TENSION SPRINGBAND
NORMACLAMP® FBS Spring Band Clamp The Norma FBS
clamp is the ideal fastener for hose connection systems
which are subjected to large temperature fluctuations.
They are suitable for use in cooling and heating systems,
fuel vent lines, and air duct systems in today’s car industry.
Although developed for the automotive sector they are now
successfully used in all branches of the industrial sector as
well. The FBS clamp can be assembled very quickly and
easily due to its spring properties it re-tightens automatically and long-term after assembly. The FBS clamp is a
one piece hose clamp and are manufactured in 12mm
& 15mm band widths, and sizes from 13mm through to
80mm diameters.
168
NORMa products
NORMACLAMP® HD High Torque Clamp
PLASTICS THREADED
NORMACLAMP® HD - High Torque Worm Drive Hose Clips The HD all stainless hose clamp is the strongest clamp in
the Norma worm drive range. It is therefore ideally suited
to heavy duty and high pressure applications where very
high tightening torque is required and in particular where
wire reinforced, silicone, plastic or tough rubber hoses are
employed. The Norma HD clamp is constructed of four
components, all in Stainless Steel W4. The wide profile
housing is permanently riveted to the saddle in four places
ensuring that the 8 screw threads are always engaged
in the band slots. The design of this clamp produces a
maximum recommended tightening torque of 17.00 Nm,
about twice that of a conventional worm drive hose clamp.
An advantage over heavy duty bolt clamps is the wide
clamping range approx. 20mm for each clamp. Available in
sizes 25-45mm through to 210-232mm.
NORMAPLAST® Type of Connectors. The Norma Plast hose
and pipe connecting range are used in almost all industrial
areas. Lines in control systems, for gases and fluids,
vacuum lines, overflow lines and many other connections
reliably and economically. The NORMAPLAST® connecting
parts are made of PA 6 (polyamide 6) and have a taper
screw on one end and one or two push-on hose connectors on the other end. The ribbing of the push-on connectors has the effect that the hose sits securely. Additionally
securing the connection by a hose clip can be necessary.
Thread type BSP. These connectors are light weight, scuff
resistant and are known for there high strength.
NORMACLAMP® S CLAMP
The Norma S clamp are especially suitable in commercial
vehicles and industrial manufacturing applications for
retaining rubber and plastic hose, retaining rubber sleeves
on pipe ends or hose connectors.
The design of the Norma S clamp with it’s robust clamping
brackets with metric bolts, offers a very high clamping
force. We recommend the two-part version for applications
submitted to extreme pressure and tensile loads. Starting
from 9mm band widths all SP clamps can be supplied with
an additional vibrationdamping rubber profile (GU) which
protects the joint against creeping water.
169
MANUFACTURER’S REFERENCE
170
Norma Part No.
TORRO S Clamping
Range
Norma Part No.
DIN Clamping Range
Trade
Reference
SAE
Reference
8-12
-
OOO
-
10-16
8-16
MOO
4
12-22
12-20
OO
6
16-27
16-25
O
8/10
20-32
20-32
1A
12
25-40
25-40
1
16
30-45
30-45
1X
20
32-50
32-50
2A
24
40-60
40-60
2/2X
28/32
50-70
50-70
3
36
60-80
60-80
-
40/44
70-90
70-90
4
48
80-100
80-100
-
52/56
90-110
90-110
5
60
100-120
100-120
-
64
110-130
110-130
6
72
120-140
120-140
-
80
130-150
130-150
-
84/88
140-160
140-160
7
96
150-170
150-170
-
104
160-180
160-180
8
-
170-190
170-190
-
-
180-200
180-200
9
116
190-210
190-210
-
-
200-220
200-220
-
-
210-230
210-230
10
136
230-250
230-250
11
152
260-280
260-280
12
-
280-300
280-300
13
-
MANUFACTURER’S REFERENCE
Norma / DIN
AISI
1-4006
410
1-4016
430
1-4301
304
1-4303
305
1-4310
301
1-4371
201 / 202
1-4401
316
1-4510
430TI
1-4511
430C6
1-4571
316TI
Material Grades
W1
Completely Zinc Plated
W2
(TORRO) - BAND & HOUSING: Stainless Steel (1.4016)
SCREW : Zinc Plated & Chromated
W2
(GBSM) - BAND & HOUSING: Stainless Steel (1.4016)
HARDWARE : Zinc Plated & Chromated
W3
Completely Stainless Steel (1.4016)
W4
Completely Stainless Steel (1.4301), NORMACLAMP® COBRA (1.4310)
W5
Completely Stainless Steel (1.4401)
171
GENERAL TERMS AND CONDITIONS OF SALE OF NORMA PACIFIC PTY LTD
1.
Scope of Application
1.1The present General Terms and Conditions shall apply to all present and future business
relations between any entity of the NORMA Group (hereinafter referred to as “NORMA”) and
the Purchaser even if they are not explicitly agreed on again. They shall supersede all previous
agreements between the parties relating to a purchase order and supplant any Purchaser`s
terms and conditions for such order. A list of entities of the NORMA Group as amended from
time-to-time can be found at NORMA’s website.
1.2 Counter-confirmations by the Purchaser with reference to its own general terms and
conditions are hereby rejected. In particular, and without limitation, a receipt, acceptance,
acknowledgement or confirmation by NORMA of any purchase order containing or referencing
conflicting, different or additional terms, conditions or provisions shall not constitute a waiver,
alteration or modification of the present General Terms and Conditions. These General Terms
and Conditions are applicable as of the date of acceptance of the purchase order in full and
as the sole and exclusive agreement between NORMA and the Purchaser with regard to the
order. They are an integral part of every contract, quotation or offer of NORMA.
1.3Any deviating, contradictory or supplementary general terms and conditions, even if known,
shall not become a component part of the contract, unless their application has been
expressly agreed in writing.
2.
Quotation, Documents
2.1NORMA shall be the exclusive owner of all rights in particular, without limitation, property
rights and copyrights in drawings or other documentation relating to the goods; they must
neither be exploited nor made available to third parties without prior approval by NORMA.
2.2The Purchaser shall inform NORMA already at the quotation stage of any unusual kind of
stress to which the products to be delivered will be subjected and point out any other risks
which could arise in the course of their use.
2.3If quotations or order confirmations refer to NORMA’s product catalogue or brochure material,
only the most recent version thereof shall be relevant.
3.
Conclusion of Contract
3.1 NORMA quotations are subject to change without notice.
3.2Within the limits of what is reasonable, NORMA reserves the right to (i) technical modifications
of the products, (ii) modifications of form, colour, and/or weight as well as (iii) formal and
technical product improvements in order to maintain the state of the art.
3.3 By placing an order for the goods the Purchaser makes a binding offer to purchase the
ordered goods.
172
Norma Pacific - A.B.N 42 054 880 769
3.4NORMA reserves the right to accept the offer based on the quotation within a period of
30 days following receipt of the order or as otherwise stated on the purchase order. The
acceptance can be declared either in writing or by delivering the goods.
3.5 Purchase orders can only be made by the Purchaser up to a maximum net purchase value
equal to the difference between the amount of an agreed credit limit and the amount currently
owed to NORMA for products purchased or otherwise outstanding to NORMA. NORMA
reserves the right apply for the first time or modify a credit limit for the Purchaser at any time
by providing eight weeks prior written notice, provided that in such case the Purchaser shall
be entitled within such eight weeks period to terminate the Agreement with immediate effect
and that failing such termination the credit limit shall apply with effect of the first day following
expiry of the eight weeks period.
3.6NORMA reserves the right to assign or to factor any demands or claims arising from the
business relationship with the Purchaser to any third Party.
4.Prices
4.1 Prices are stated ex-works (unless otherwise specified)
4.2Prices do not include GST. This will be shown separately on the invoice in the respective
legally applicable amount.
4.3 A minimum order value of seventy five dollars ($75) net is applicable.
4.4The price of goods quoted by the company and its acceptance of orders are based on costs
prevailing at the time of acceptance. The goods will be invoiced at prices ruling at the time of
the dispatch (and in case of instalment delivery of dispatch of each instalment). Any increase
in the price between the date of acceptance and the date of dispatch shall fairly represent the
increase in cost to the Company of manufacture and distribution of goods.
5
Payment, Payment Default, Insolvency
5.1 Terms of payment are strictly net twenty-five (25) days from end of month of invoice.
5.2Offsetting by the Purchaser shall be excluded, unless made with claims that are recognized by
binding judgment or uncontested, or by agreement.
5.3In the event that the Purchaser is in default with his payments, NORMA shall be entitled to charge
penalty interest at a rate of 10.5%. NORMA reserves the right to claim additional damages.
5.4 In case of default NORMA shall be entitled to call due any accounts not yet due in the current
business relationship with the Purchaser.
173
5.5
If it becomes evident subsequent to the conclusion of the contract that NORMA’s payment
claims are in jeopardy due to the Purchaser’s inability to pay, NORMA shall be entitled, if
NORMA is obligated to make advance deliveries or payments, to withhold its performance and
to set the Purchaser a reasonable time period until the expiry of which the Purchaser shall
either make contemporaneous payments against NORMA’s delivery or furnish the respective
collateral. If the term set expires unsuccessfully, NORMA shall be entitled to withdraw from the
contract and claim compensation of damages incurred.
NORMA may also withdraw from the contract if the Purchaser or a third party files for
insolvency over the assets of the Purchaser’s. The same shall apply in the event that
insolvency proceedings are opened over Purchaser’s assets or such opening is denied due to
lack of assets.
5.6 In any case, any late payment, after a formal demand, will apply a penalty amount of 10.5%.
5.7Whatever the means of payment used, payment shall not be deemed to have been affected
before NORMA’s account has been fully and irrevocably credited.
6
Delivery Dates, Delay
6.1Agreed delivery dates or periods are deemed to be met if the goods to be delivered are ready
for shipment before the set delivery date or period expires.
6.2 NORMA shall be entitled to make reasonable partial deliveries.
6.3 Orders for delivery will be free into store (FIS) for orders of five hundred dollars ($500) plus net
invoice value. Orders of less than five hundred dollars ($500) net invoice are subject to freight
charges.
6.4If delay in delivery is caused by any of the circumstances mentioned in Clause 11 or by an
act or omission on the part of the Purchaser, including suspension under Clause 5.5, the
time for delivery shall be extended by a period which is reasonable having regard to all the
circumstances of the case. This provision applies regardless of whether the reason for the
delay occurs before or after the agreed time for delivery.
Delivery times may be subjected to delays caused by unforeseen circumstances which are
beyond the company’s control, such as strikes, lock-outs, industrial disputes, delays in the
receipt of essential materials whether or not these circumstances arise from matters within
the company’s control or with one of its suppliers or sub-contractors, and the delay in delivery
shall not be sufficient cause for the cancellation by the Purchaser.
6.5 If the Purchaser anticipates to be unable to accept delivery of the goods at the agreed delivery
time, Purchaser shall forthwith notify NORMA in writing thereof, stating the reason and, if
possible, specifying the time when the Purchaser will be able to accept delivery.
174
6.6If the Purchaser fails to accept delivery at the agreed delivery time the Purchaser shall
nevertheless pay any part of the purchase price which becomes due on delivery, as if delivery
had taken place. NORMA shall arrange for storage of the goods at the risk and the expense
of the Purchaser. NORMA shall also, if the Purchaser so requires, insure the goods at the
Purchaser’s expense.
6.7Unless the Purchaser’s failure to accept delivery is due to any such circumstance as
mentioned in Clause 11, NORMA may by notice in writing require the Purchaser to accept
the delivery within a final reasonable period of grace. If, for any reason for which NORMA
cannot be held responsible, the Purchaser fails to accept delivery within such period of grace,
NORMA may by notice in writing terminate the contract in whole or in part with immediate
effect. NORMA shall then be entitled to compensation of damages suffered by reason of the
Purchaser’s default.
6.8In the event that NORMA is in default of delivery the Purchaser may withdraw from the contract,
provided that the Purchaser had set a reasonable period of grace for effecting delivery and that
NORMA had not shipped the goods, or any parts thereof, when this period of grace expired. After
the period of grace has expired, the Purchaser is entitled to withdraw from the contract for the
outstanding part of the delivery. In the case that NORMA made a partial delivery, the Purchaser
can only withdraw from the contract as a whole if the Purchaser cannot use the partial delivery
due to the default.
6.9Risk shall transfer to the Purchaser as soon as the consignment has been handed-over to
the person transporting it or has left NORMA’s storage area in order to be dispatched Unless
otherwise agreed, all operations involving transport, handling, storage, insurance, customs and
maintenance shall be carried out by and be paid for by the Purchaser.
6.10All other claims against NORMA for default shall be excluded except where NORMA has been
culpable of wilful intent or gross negligence.
6.11In the present General Terms and Conditions gross negligence shall mean an act or omission
implying either a failure to pay due regard to serious consequences which a conscientious
supplier/manufacturer would normally foresee as likely to ensue, or a deli-berate disregard of
the consequences of such act or omission.
7Retention of Title
7.1The delivered goods will remain the property of NORMA, until all present and future payment
claims against the Purchaser arising in connection with the delivered goods, have been
fulfilled.
7.2 The Purchaser shall be entitled to resell the goods retained in our property (hereinafter
referred to as ”Reserved Goods”) in the ordinary course of business. The Purchaser hereby
assigns to NORMA all accounts receivables arising from such resale, in particular, without
limitation the payment claims against Purchaser’s customers.
175
7.3In the event that Reserved Goods are combined with other goods that are not NORMA’s
property NORMA shall have joint title in the combined goods pro rata to the delivery price
agreed between the Purchaser and NORMA for the Reserved Goods compared to the value
of the other goods so combined with the Reserved Goods, at the time of the combination. For
any combined goods the same rules apply as for the Reserved Goods.
7.4 In the event that Reserved Goods are resold together with other goods that are not NORMA’s
property, the Purchaser’s claim against its customer in the amount of the delivery price agreed
between the Purchaser and NORMA for the Reserved Goods is deemed assigned to NORMA.
7.5The Purchaser shall be authorized to collect these accounts receivable even after the
assignment, without prejudice to NORMA’s right to collect these receivables itself. NORMA
undertakes to refrain from doing so, however, as long as the Purchaser duly meets its
payment obligations. In the event that the Purchaser makes use of the collection authorization,
the collected proceeds in the amount of the delivery price agreed between the Purchaser and
NORMA for the Reserved Goods shall be payable to NORMA.
7.6 NORMA undertakes to release the collateral to which NORMA is entitled in the amount in
which its value exceeds the accounts receivable to be collateralized, to the extent that these
have not yet been paid, by more than 20%.
7.7The Purchaser shall notify NORMA without undue delay of any seizure or similar acts by
third parties in order to put NORMA in the position to take legal steps against such acts or
otherwise protect its interest.
8
Complaints/Liability for Defects
8.1Claims arising from incorrect charges or supply of goods must be made within ten (10) days
of receipt of goods. Credit requests arising from incorrect ordering, over ordering, excess
stock etc are subject to a 15% restocking charge at time of credit.
Return goods must be accompanied by an authorised number issued by our office, freight
prepaid, and accompanied by documents showing original invoice number & authorisation
number. Goods returned without authorisation may not be processed. Goods returned must
be unused and resalable condition. Goods received damaged or used will not be subject to
credit. Special goods manufactured or modified to customer specifications cannot be returned.
8.2 The notice shall contain a description of the defect and short supply.
8.3If the Purchaser fails to notify NORMA in writing of an apparent defect within the time limits
set forth in Clause 8.1 the Purchaser shall lose its right to have the defect remedied.
176
9Rights in the Case of Defects/Warranty
9.1 The quality owed to the Purchaser shall be determined by the quality agreed with the
Purchaser or the quality and general purpose of use stated by NORMA. If NORMA’s delivery is
based on individual drawings, specifications or samples provided by the Purchaser, the same
is also responsible for the suitability of the delivered goods for the intended purpose of use.
The Purchaser is responsible for validating the performance under the required operating
condition of the complete system in which Norma products are to be used.
9.2 In case of a justified notice of defect, NORMA shall provide subsequent fulfilment by
replacement delivery or reworking. If NORMA does not fulfil within a reasonable time period
set by the Purchaser or if such subsequent fulfilment fails then the Purchaser shall have the
right to demand a price reduction or, in the case of a material breach of contract, to withdraw
from the contract.
If only parts of the delivery are defective, the right to subsequent fulfilment relates only to the
defective part of the delivery, unless the Purchaser is unable to use the partial delivery.
9.3
If the Purchaser has given such notice as mentioned in Clause 8 and no defect is found for
which NORMA is liable, NORMA shall be entitled to compensation for the costs incurred as a
result of the notice.
9.4 In urgent cases, e.g. When the Purchaser’s operational safety is in jeopardy or excessive
damage must be prevented, the Purchaser shall be entitled – after prior consultations
with NORMA – to perform remedial work itself or to have the corrective action performed
by qualified third parties. Where successful remedial works have been undertaken by the
Purchaser or a third party, reimbursement by NORMA of reasonable costs incurred by the
Purchaser shall be in full settlement of NORMA’s liabilities for the said defect.
9.5Where the defect has not been successfully remedied, the Purchaser has set a final time
period for completion and NORMA fails to fulfil its obligation, (i) the Purchaser shall be entitled
to a reduction of the purchase price in proportion to the reduced value of the goods, provided
that under no circumstance shall such reduction exceed 15 % of the purchase price, or (ii)
where the defect is so substantial as to significantly deprive the Purchaser of the benefit of
the contract, the Purchaser may terminate the contract by notice in writing to NORMA. The
Purchaser shall then be entitled to compensation of damages suffered up to a maximum of
15% of the purchase price.
9.6NORMA shall not be liable for defects arising out of the materials provided, or a design
stipulated or specified by the Purchaser.
9.7NORMA shall be liable only for defects which appear under the conditions of operation
provided for in the contract and under proper use of the goods. Such liability of NORMA shall
not cover defects which are caused by faulty maintenance, incorrect erection or faulty repair
by the Purchaser, or by alterations carried out without the consent of NORMA in writing.
177
9.8
A s stipulated in Clause 9.1-9.7, NORMA shall not be liable for defects including, without
limitation, damages the defect may cause like for instance loss of production, loss of profit
and other indirect damages. This limitation of NORMA shall not apply if NORMA or its
statutory representatives or vicarious agents are guilty of wilful intent or gross negligence as
defined in Clause 6.10.
10
Limitation of Liability, Product Liability
10.1 In the event of wilful intent or gross negligence of NORMA or its statutory representatives or
vicarious agents NORMA shall be liable pursuant to the applicable statutory provisions. Unless
in the event of wilful intent or gross negligence, NORMA’s liability shall be limited to the direct
average damage foreseeable in relation to such type of goods and typical for such contracts.
10.2 NORMA shall not be liable for slightly negligent breaches of nonsignificant contract duties.
10.3 Unless otherwise stated in these General Terms and Conditions there shall be no liability for
either party towards the other party for loss of production, loss of profit, loss of use, loss of
contracts or for any other consequential or indirect damages whatsoever.
10.4 The above-mentioned limitations of liability do not concern claims of the Purchaser arising out
of compulsory statutory product liability or in the case of personal injury or damage to health,
or loss of life when these can be attributed to NORMA.
10.5 Unless otherwise stated herein above, NORMA’s liability shall be excluded.
10.6 Any claims for compensation of damages that can be raised by the Purchaser due to a defect
become statue-barred on the expiry of twelve months following the transfer of risk. This does
not apply if NORMA can be accused of fraudulent intent.
11
Force Majeure
Events of force majeure shall be, in particular, without limitation: the occurrence of incidents, as
upheld by effective legislation or by case law, but also strikes or other blocking labour unrest,
lockouts, interruption of operations, delays in the delivery of essential pre-materials, to the extent
that such hindrances have a proven material influence on the production or delivery of NORMA’s
products, paralysing bad weather, blocking road accidents or incidents, fires, war, extensive military
mobilization, seizure, requisition, insurrection, embargo, restrictions in the use of power, or generally,
the fact, in spite of all due care taken, of nothing being able to make the delivery in accordance with
the instalment dates as result of a ban on, or non-receipt, of carriage authorizations by the relevant
authorities for the various centres concerned by the issuance. NORMA shall inform the Purchaser
without undue delay of the occurrence of a case of force majeure, of which it becomes aware and
that, in its opinion, could affect the contract`s implementation and will endeavour to remedy the
situation, which has thus arisen, without undue delay. The agreed dates of delivery pursuant to Clause
6.1 will be extended for the duration of force majeure. Should the event of force majeure continue
uninterruptedly for longer than six months, the Purchaser has the right to withdraw from the contract.
178
12
Disputes and Applicable Law
12.1 Any action or proceedings by one party against the respective other party may be brought
in any court(s) having jurisdiction over the location of the entity of NORMA from which this
contract is issued as shown by the address of the contracting entity of NORMA
12.2 This contract is to be construed according to the laws of the country (and state/province, if
applicable) from which this contract is issued as shown by the address of the contracting
entity of the NORMA Group, excluding, however, the provisions of the United Nations
Convention on Contracts for the International Sale of Goods and any provision on the conflict
of laws that would require application of another choice of law.
13
Confidentiality, Final Provisions
13.1 All documents, sketches, designs, drawings, calculations and other documents provided or
otherwise disclosed to the Purchaser shall remain the property of NORMA. The Purchaser
shall ensure that they are treated confidential, i.e. That they are not disclosed to any third
parties or used for any purposes other than for the purposes hereof. In particular, without
limitation, the Purchaser shall treat confidential all prices and other terms and conditions
agreed with NORMA.
13.2 If any individual provisions in this contract with the Purchaser, including these General Terms
and Conditions, should be or become ineffective as a whole, or in part then this does not
affect the validity of the remaining provisions.
13.3 The provision that is ineffective as a whole, or in part, shall be replaced by a provision the
economic effect of which approaches as closely as possible the economic effect intended to
be achieved by the original, ineffective provision.
14
Anti-Corruption and Anti-Money Laundering Contractual Provisions
14.1 The Purchaser represents and warrants to NORMA that:
14.1.1In carrying out its responsibilities under this Agreement, neither the Company, nor any director,
officer, employee or shareholder of the company shall, directly or indirectly pay, promise to pay
or authorize the payment of any money or gifts to any government official for the purpose of
influencing any act or decision of such official, or otherwise promoting the business interests
of the company in any respect, now or in the future.
The Company further certifies that no payments of bribes or kickbacks have been made to any
government official prior to this date, whilst conducting business with Norma.
14.1.2 Neither the Purchaser nor any of its subsidiaries, directors, officers, employees or agents,
shall use Purchaser’s relationship with NORMA to attempt to disguise the sources of illegallyobtained funds. The Purchaser further represents and warrants that no such attempt of the
sort described in this paragraph has been made prior to the date of this Agreement.
179
14.1.3The Purchaser has received, read, and agrees to comply with the terms of the Company’s
Anti-Corruption Policy and Anti-Corruption Compliance Procedures available on the Norma
Group web to view.
14.2 Notwithstanding any other provision of this Agreement, NORMA may immediately suspend this
Agreement, and any payments required under this Agreement, in the event it should receive
information which it determines in good faith and in its sole discretion to be evidence of a
breach by the Purchaser of any undertaking in subsections 14.1.1, 14.1.2, or 14.1.3 above.
NORMA shall not be liable to the Purchaser for any claims, losses, costs or damages related
to its decision to withhold payments under this provision.
14.3 In the event of receipt of such evidence and/or such suspension, NORMA shall have the right
to audit the Purchaser in order to satisfy itself that no breach has occurred, and Purchaser
shall fully cooperate with any such audit or related inquiry by the Company. NORMA shall
consult with Purchaser and may thereafter immediately terminate this Agreement by written
notice, effective immediately, if NORMA, acting in good faith and in its sole discretion, is
reasonably satisfied that such a breach has occurred, or that the Purchaser has failed to
cooperate fully with NORMA’s audit or related inquiry.
14.4In the event of such termination, the agreement pursuant to which the sale is made shall be
void ab initio, provided that if such agreement was entered into before August 1st 2011, it
shall be void as of August 1st 2011. NORMA shall have no liability to the Purchaser under
this Agreement for any unpaid fees, reimbursements or other compensation owed under this
Agreement, or for any other loss, cost, claim, or damage resulting, directly or indirectly, to the
Purchaser from such termination.
14.5 In the event NORMA is reasonably satisfied that a breach has occurred, NORMA is entitled
to recover all fees paid to the Purchaser in connection with any transaction involving such
a breach of these representations and warranties. The Purchaser shall indemnify and hold
harmless NORMA for all losses, costs, claims or damages arising from or relating to breach of
these representations and warranties and/or termination of this Agreement.
14.6In no event shall NORMA be obligated to take any action under this Agreement if NORMA,
acting in good faith and in its sole discretion, believes that to do so would cause NORMA to
be in violation of any nation’s or territory’s laws, including but not limited to the U.S. Foreign
Corrupt Practices Act.
180
GUARANTEE
Norma Pacific Pty Ltd will guarantee all products against faulty materials or manufacture outside
specification. We guarantee all products will perform in service, given fitment in accordance with
the manufacturer’s recommendations/specifications and application. No liability is accepted for
consequential loss arising from faulty goods. Faulty goods are to be returned to Norma Pacific Pty
Ltd within sixty (60) days of the defect occurring. Should the goods be assessed as defective, an
exchange will be effected at no charge.
DISCLAIMER
Every effort has been taken to ensure the specifications, product information and pricing contained
within is current, however the company reserves the right to change, modify or update any information
without notice. The information enclosed shall not be binding upon the company and no liability is
accepted for errors or omissions.
181
NOR_1155
NORMA Pacific (Australia) Pty Ltd
85 Merrindale Drive,
Croydon South, Victoria, AUSTRALIA
Tel: +61 3 9761 4416 Fax: +61 3 9761 4030
Email: [email protected]
Web: www.normapacific.com
PHONE 1300 CLAMPS
www.normapacific.com

Catalogue 2013

Transcription

Similar documents

banding 538 hose clamps 539 couplings 544 hose

USA - NORMA Americas Distribution Services

600 XC SP F/O Model #S02NP6ES 600 XC SP M

our Clips and Clamps Catalogue

EQV-X PDF - Versatemp

Safeseal Technology

PRO X 800

Tradition with Technology