by clicking here

Micro Jig, Inc.
1065 E. State Rd. 434
Box 195607
Winter Springs, FL 32708
USA
MICROJIG
CATALOG
2015
TABLE OF CONTENTS
WORK SMARTER.
GRR-RIPPER 3D Pushblock System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
MICRODIAL Tapering Jig. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11
We know your woodworking projects are a labor of love just like our products are to us.
That’s why we put ourselves in your workshop, imagining every way you will use and
experience our family of brands. You will feel the difference our carefully selected
materials and intelligent engineering make throughout your projects. We’re committed
to making the complex world of woodworking simpler while you work safer.
GRR-RIP BLOCK Smarthook Pushblock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13
ZEROPLAY Guide Bar System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15
We’re always moving forward so you can always work smarter.
MJ SPLITTER Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17
Where to Buy MICROJIG Products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
SEE THE GRR-RIPPER IN ACTION!
WORK SAFER.
THE SAFEST, MOST PRECISE PUSHBLOCK
PROVEN BY THE PROS.
COOL TOOLS
with Chris Grundy
USE YOUR SMART PHONE
Scan the QR Code and watch instantly!
GRR-RIPPER Models
1
2
Green GRR-RIP® Proprietary non-slip material
provides superior gripping power
3
SAW BLADE TUNNEL
Rip or resaw as narrow as 1/4” consistently
without moving the fence
4
A REVOLUTION
IN WOODWORKING.
MOVING-BLADE-GUARDTM
For total hand protection
MICROJIG’s 3D PUSHBLOCK®
system applies three directions
of pressure on your workpiece
providing superior precision,
control and safety throughout
the cut.
1
ADJUSTABLE CENTER LEG
Controls the off-cut workpiece
4
Model GR-100
Advanced Model GR-200
Replacement Legs
Product colors may vary.
1/4” Replacement Leg
Replacement Leg Set
Product Number: GRP-5
Product Number: RR-303
Product Info: Replace all three
GRR-RIPPER legs with this
replacement kit. Includes one
1/4” leg, one 1/2” leg and
one center leg.
1/2” Replacement Leg
Product Number: GRP-4
6
5
Replacement Legs are available in black or yellow. All GRR-RIPPER hardware and parts are individually replaceable. Call us to order - 1-855-RIP-SAFE.
BALANCE SUPPORT
Squares the GRR-RIPPER
for small and narrow
workpieces
6
STABILIZING PLATE Secures workpiece
level to fence, preventing drift.
(GR-200 model accessory)
7
ADJUSTABLE SPACER Operates as
a router table guide to eliminate
snipe. Adds 1” of additional Green
GRR-RIP for controlling wider stock.
(GR-200 model accessory, not shown)
3
5
2
6
Instructional DVD included
7
GRR-RIPPER Accessories
8
GRR-RIPPER Accessories
1/8” Leg
Handle Bridge Kit
Deflector/Connector
Gravity Heel Kit
Product Number: GRP-11G
Product Info: Fits all GRR-RIPPER
models. Rip 1/8” thin strips safely,
accurately and consistently on a table
saw with the GRR-RIPPER 1/8” Leg.
Product Number: GRHB-010
Product Info: Fits all existing GRR-RIPPER models.
Unique arch design gives the handle four points
of contact to evenly distribute the downward
pressure. Allows you to angle the handle for more
ergonomic comfort. Bonus Trailing Hook included.
Product Number: GRDC-020
Product Info: Fits Handle Bridge Kit.
Acts as a chip deflector preventing
material from flying towards you
when freehand routing. Bridge two
GRR-RIPPERs to tackle longer or wider
stock. Quickly connects to the Handle
Bridge Kit for fast, easy and safe use.
Product Number: GRGH-040
Product Info: Hooks the tail end of your workpiece
and automatically retract mid-board. Provides
extra leverage to help push through the cut
and prevent blow out. For use with table saws,
bandsaws, jointers and router tables. Includes
5 Heels, 2 Heel Spacers and mounting hardware.
Adjustable from 0-1”. Fits any existing
GRR-RIPPER. Replacement Heels available.
9
THE MOST PRECISE,
VERSATILE TAPERING JIG
Work faster. Switch quickly and easily
between two tapers on a single workpiece.
MEMORYLOCK™ maintains two
independent stops for you.
Work with precision.
The interlocking
COLORMATCH™
system ensures the
angle of your taper
to 1/8th of a degree
(incrementally up to
10 degrees).
MICRODIAL Tapering Jig
SEE THE MICRODIAL IN ACTION!
Product Number: TJ-5000
Product Info: For use on table saws,
router tables and bandsaws with the
GRR-RIPPER Advanced Model GR-200
(sold separately). Includes Instructional DVD.
• The MICRODIAL gauge locks in exact
incremental taper angles
• Precision tapered cutting as accurate as 1/8th of a degree
• Works with the GRR-RIPPER 3D PUSHBLOCK
system for ultimate safety and control
• Set your taper angle by degree or rise and run for fast cutting
USE YOUR SMART PHONE
10
Scan the QR Code and watch instantly!
• Create 2-, 4-, 6- or 8-sided tapered legs
• Use on the router table to create custom tapered profiles for
exquisite detail on your project legs
Instructional
DVD included
11
GRR-RIP BLOCK Smart Hook Pushblock Product Number: GB-1
Podular Green GRR-RIP®
non-slip material gives you
command over your work.
Smart Hook Pushblock –
The Smart Choice for Safety
Harness the ultimate gripping power of the
only pushblock with Smart Hooks that ensure
you know where to grab your workpiece.
GRR-RIP BLOCK’s Smart
Hooks drop-down into
position when you need them,
and retract when you don’t.
1
SEE THE GRR-RIP BLOCK IN ACTION!
12
USE YOUR SMART PHONE
Scan the QR Code and watch instantly!
GRR-RIP BLOCK’s revolutionary Smart
Hooks grab the tail-end of the board and
automatically retract mid-board. Locks
up and out of the way easily.
EXTREME GRIP GRR-RIP BLOCK’s
cutting edge technology increases
safety and stability when working
with jointers, bandsaws, router tables,
shapers and table saws.
2
VERSATILITY Use the 90-degree flip
guide for veneers or resawing on
bandsaws. Or use GRR-RIP BLOCK
against the router fence for beaded
face frames and other profiles. The
Smart Hooks still engage vertically for
superior control.
3
PROTECTION Improved control over
your workpiece while freehand routing
means your hands remain safe and out
of harms way. (GRR-RIP BLOCK shown
here with the optional MJ Deflector/
Connector accessory.)
13
ZEROPLAY Guide Bar System
SEE THE ZEROPLAY IN ACTION!
USE YOUR SMART PHONE
14
Scan the QR Code and watch instantly!
1
ONE-TOUCH CALIBRATION®
Precision fit. No side-to-side play.
2
TOP DOWN INSTALLATION
Square your sled as you tighten.
ZEROPLAY Guide Bar System
Double Pack
ZEROPLAY Guide Bar System
Single Bar
Product Number: ZP9-B2S2
Product Info: Hassle-free miter bars. Fits any
standard 3/4” x 3/8” T-Track Miter Slots,
ShopSmith & General 350 tracks. Build accurate
table saw sleds quickly and easily.
Product Number: ZP9-B1
Product Info: Hassle-free miter bars. Fits any
standard 3/4” x 3/8” T-Track Miter Slots,
ShopSmith & General 350 tracks. Build accurate
table saw sleds quickly and easily.
3
BUILD PRECISION TABLE SAW SLEDS
Achieve perfectly square cuts.
Precision Miter Stop
Product Number: ZP9-S1
Product Info: Reliable and
precise hold-down anchors for
table saw tops and miter tracks.
For T-Track miter slots only.
15
MJ SPLITTER SteelPro Systems
A table saw splitter that is easy to install,
easy to use, easy to align, and doesn’t
get in the way.
1
Tough to the core, the MJ SPLITTER SteelPro
has a 100% polycarbonate shell reinforced with
a solid stainless steel foundation. Able to take
on the stress caused by many solid woods, the
SteelPro will greatly reduce the chance of kickback
on your table saw and virtually eliminate burning.
FOOL-PROOF INSTALLATION The precision drill
guide eliminates guesswork when installing into
your Zero Clearance Insert.
DOUBLE THE SAFETY Install TWO MJ SPLITTER
SteelPros to prevent kickback on the keeper and
off-cut side.
SEE THE MJ SPLITTER IN ACTION!
1
2
STEELPRO
Product Number: SP-2
Product Info: For 1/8” kerf 10” saw blades.
90º cut only – Kerf range 0.118” - 0.145”.
2
STEELPRO TK
Product Number: SP-2TK
Product Info: For 10” thin kerf saw blades
90º cut only – Kerf range 0.090” - 0.118”.
USE YOUR SMART PHONE
16
Scan the QR Code and watch instantly!
MJ SPLITTER SteelPro systems work with plastic
or wood-based Zero Clearance Inserts (ZCI) only.
17
Join over 200,000 of the
smartest woodworkers worldwide.
To find a local or online authorized dealer,
please visit MICROJIG.com/wheretobuy
Work safer, work smarter.
MICROJIG.com | 1-855-RIP-SAFE
Don’t miss out on free tips, tricks, how-to’s, project and jig plans.
Visit MICROJIG.com/newsletter
and signup for the MJ INSIDER Monthly Newsletter.
International callers: 1-407-696-6695
For dedicated service and support, please visit MICROJIG.com/support
or call 1-855-RIP-SAFE to speak with a MICROJIG expert.
Micro Jig, Inc. • 1065 E State Road 434 • Box 195607 • Winter Springs, FL 32708 • USA • MICROJIG.com
Copyright © 2014 Micro Jig Inc. All rights reserved.