Buildex Product Catalogue

Transcription

FEATURES
TEKS®
HEAD
Head
Fastening
Features
Proper head style choice will ensure stability during driving, proper
clamping and desired finished appearance.
THREAD FORM AND DIAMETER
Threads
The correct choice of thread form and diameter optimizes low installation
torque with high pullout strength.
Pilot Section
(When Necessary)
PILOT SECTION
The unthreaded portion of the point assures the drilling of the steel
is completed before the threads begin tapping into the drilled hole.
POINT
The point is designed to efficiently remove material and precisely size the
hole for the thread.
Flute
Point
FINISH
Platings and coatings provide lubricity during drilling and tapping as well
as corrosion resistance.
10
-
Nominal Screw Size
Thread
Diameter
#6
#7
#8
#9
#10
#11
#12
#13
#14
1/4
#17
Decimal
Equivalent
.140
.150
.160
.180
.190
.200
.210
.230
.240
.250
.286
16
x
Threads Per Inch
3/4”
HWH
Teks/3
Screw Length
Head Style
Drill Point Type
Steel Gauge Chart
Common
Sheet Steel
Gauges
30
28
26
24
22
20
18
16
14
12
1/8
10
3/16
1/4
1/2
Decimal Eq.
Inches MM
.012 .30
.015 .38
.018 .45
.024 .61
.030 .76
.036 .91
.048 1.21
.060 1.52
.075 1.90
.105 2.65
.125 3.18
.134 3.42
.187 4.77
.250 6.36
.500 12.72
Drill and Tap Material Thickness Chart
12.72mm 12.72mm
.500
.500
Material Thickness (Inches)
Nominal Screw Sizes
FASTENER DESCRIPTION AND BREAKDOWN - EXAMPLE
.500
9.51mm
.375
.400
6.36mm 6.36mm
.300
5.3mm
.200
.100
2.4mm
.095
2.4mm
.095
2.4mm
.095
.018
.45mm
.018
.45mm
Screw Size
Point #10 #12
Teks/1
5.3mm
.210
5.3mm
.100
.125
.018
.036
.036
.91mm
.91mm
.91mm
.036
.036
.91mm
.91mm
1/4
#8
#12
#10
#12
1/4
.45mm
.250
.250
.210
2.50mm
.030
.0
4.17mm
.210 .175
.036
.125
3.18mm
3.18mm
#12
1/4
.125
.125
3.18mm
3.18mm
3.18mm
#12
#12
1/4
.125
Teks/2
Teks/3
Teks/4
Teks/4.5
*Drill & tap capacities may vary with special feature designs.
Refer to product reports for specifics.
Teks/5
SELECTION CHART
Driv-Tru HWH Socket System
B2
PART NUMBER
DESCRIPTION
APPLICATIONS
1591910
Driv-Tru Socket
All 1/4’’ across flats HWH fasteners
1513910
Driv-Tru Socket
1574910
Driv-Tru Socket
Construction Products
Call our toll free number 800-387-9692 or visit www.itwconstruction.ca for general information.
Visit ITW Buildex’s web site www.itwbuildex.com for the most current product and technical information.
TEKS®
DESCRIPTION/ADVANTAGES
Light Duty Steel-To-Steel Applications—
Self-Drilling
Fasteners
Preferred Most
by Electrical,
Decking, HVAC
and Metal
Building
Contractors
TEKS
Self-Drilling
Fasteners
Sharp convex drill point has precise cutting edges to improve drill
performance with less effort.
Non-walking point provides fast material engagement.
Unique point to thread design extrudes the metal preventing stripout.
Point to thread design maximizes pullout performance and minimizes backout.
Four head styles available to handle various applications.
Climaseal® finish provides excellent corrosion resistance
SPECIFICATIONS
Diameter / 6-20
Thread Form 8-18
10-16,
10-24
Head Styles
Hex Washer Head
(HWH)
Drill Point
Teks 1
Finish
Type
Socket Pan Head
(SP)
Phillips Pan Head
(PP)
Teks 2
Kesternich Results
(DIN 50018, 2.OL)
Modified Truss Head
(MTH)
Teks 3
Salt Spray Results
(ASTM B117)
Electro-zinc (EZ)
3 cycles - 5% or less red rust
48 hours - 5% or less red rust
Climaseal® Coating (CL) 30 cycles - 10% or less red rust 720 hours - 10% or less red rust
INSTALLATION INSTRUCTIONS
1. A standard screwgun with a depth sensitive nosepiece should be used to install Teks. For optimal
fastener performance, the screwgun should be a minimum of 4 amps and have a RPM range of 0-2000.
2. Adjust the screwgun nosepiece to properly seat the fastener.
3. New magnetic sockets must be correctly set before use. Remove chip build-up as needed.
4. The fastener is fully seated when the head is flush with the work surface.
5. Overdriving may result in torsional failure of the fastener or stripout of the substrate.
6. The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread.
B3
TEKS Light Duty Steel-To-Steel Applications
APPROVALS/LISTINGS
APPLICATIONS
Stitch roof deck and wall panel sidelaps.
Factory Mutual (J.I. 2 X 9A2 AM)
HVAC, electrical trim accessories to steel
framing.
ICBO 3056
ICC - ESR 1976
Residential steel frame construction.
DRILL POINTS
Brick ties to steel framing.
Track to stud and stud splicing.
Teks 1
Hat channel to stud.
Teks 2
Teks 3
12.72mm 12.72mm
.500 .500
.500
9.51mm
.375
.400
6.36mm 6.36mm
.300
5.3mm 4.17mm 5.3mm 5.3mm
.210 .175 .210 .210
.200
2.5mm
2.4mm 2.4mm 2.4mm
.100 .095 .095 .095 .100
.030
.018 .018 .018
.0 .45mm
.45mm .45mm
Screw Size #10 #12 1/4
Point
Teks/1
TEKS® Fasteners
.036 .036 .036 .036 .036
.91mm .91mm .91mm .91mm .91mm
#8 #12
Teks/2
#10 #12 1/4 #12 1/4 #12 #12 1/4
Teks/3
Teks/4 Teks/4.5 Teks/5
Finish: Electro-Zinc Plating.
PART
REFERENCE
DESCRIPTION
NUMBER NUMBER
HEAD
STYLE
DRILL
POINT
DRILL & TAP
CAPACITY
MAX. MATERIAL
ATTACHMENTS
BOX
QTY
“P”
“B”
PAK QTY PAK QTY
6220Z
6220Z
6-20 x 7/16"
#2 PP
#2
.036-.100
.100
15,000
2060
2060
6-20 x 1/2"
#2 SP
#2
.036-.100
.205
15,000
2240 P B
2240 P B
8-18 x 1/2"
#2 SP
#2
.036-.100
.205
10,000
2250
2250
8-18 x 1/2"
MTH
#2
.036-.100
.205
10,000
2280 B
2280 B
8-18 x 5/8"
#2 SP
#2
.036-.100
.330
10,000
1,000
2330 B
2330 B
8-18 x 3/4"
#2 SP
#2
.036-.100
.455
10,000
1,000
2360 B
2360 B
8-18 x 1"
#2 SP
#2
.036-.100
.705
8,000
500
2220 P B
2220 P B
8-18 x 1/2"
1/4" HWH
#2
.036-.100
.205
10,000
2260
2260
8-18 x 5/8"
1/4" HWH
#2
.036-.100
.330
10,000
2310
B
2310
B
8-18 x 3/4"
1/4" HWH
#2
.036-.100
.455
10,000
1,000
2365
B
2365
B
8-18 x 1"
1/4" HWH
#2
.036-.100
.705
8,000
500
8-18 x 1-1/2"
1/4" HWH
#2
.036-.100
1.205
4,000
1204200
B4
.125 .125 .125 .125 .125
3.18mm 3.18mm 3.18mm 3.18mm 3.18mm
*Drill & tap capacities may vary with special feature designs. Refer to product reports for specifics.
SELECTION CHART
P
.250 .250
1204200
Available in P PAK
B
APPLICATIONS
- HVAC, electrical trim
accessories to steel framing
100
1,000
- Residential steel frame
construction
- Track to stud
100
- Hat channel to stud stud splicing
1,000
Available in B PAK
SELECTION CHART
TEKS® Fasteners
Finish: Electro-Zinc Plating.
PART
REFERENCE
DESCRIPTION
NUMBER NUMBER
2420
B
2450
B
2480
2490
B
2495
B
DRILL & TAP MAX. MATEREIAL
CAPACITY
ATTACHMENTS
BOX
QTY
“P”
“B”
PAK QTY PAK QTY
2420
10-16 x 1/2"
#2 SP
#3
.036-.175
.150
8,000
1,000
2450
B
10-16 x 5/8"
#2 SP
#3
.036-.175
.200
7,000
1,000
PB
10-16 x 3/4"
#2 SP
#3
.036-.175
.325
6,000
2490
B
100
10-16 x 1"
#2 SP
#3
.036-.175
.575
5,000
500
2495
B
10-16 x 1-1/4"
#2 SP
#3
.036-.175
.825
4,000
250
2400 B
10-16 x 1/2"
5/16" HWH
#3
.036-.175
.150
6,000
1,000
2440
2440
B
10-16 x 5/8"
5/16" HWH
#3
.036-.175
.200
7,000
1,000
PB
10-16 x 3/4"
5/16" HWH
#3
.036-.175
.325
6,000
10-16 x 1"
5/16" HWH
#3
.036-.175
.575
5,000
500
10-16 x 1-1/4" 5/16" HWH
#3
.036-.175
.825
3,000
250
B
2460
PB
2510
2510
B
2520 B
B
2520 B
Available in P PAK
B
APPLICATIONS
- Clips, duct straps, brick
ties or accessories to steel
framing
500
2400 B
2460
P
DRILL
POINT
B
2480
PB
HEAD
STYLE
100
500
Available in B PAK
TEKS® Fasteners
Finish: Climaseal Coating.
PART
NUMBER
REFERENCE
NUMBER
DESCRIPTION
HEAD
STYLE
DRILL
POINT
DRILL & TAP
CAPACITY
MAX. MATERIAL
ATTACHMENTS
BOX
QTY
APPLICATIONS
1107053
1107053
10-16 x 3/4"
5/16" HWH
#1
.018-0.95
.220
5,000
1109053
1109053
12-14 x 3/4"
5/16" HWH
#1
.018-0.95
.205
4,000
- Stitching roof deck, wall panel
sidelaps or duct work
1790
1399000
1/4-14 x 7/8
5/16" HWH
#1
.018-0.95
.380
5,000
1224000
1224000
10-16 x 3/4"
#2 PP
#3
.036-.175
.325
5,000
1397000
1397000
10-16 x 1/2"
5/16" HWH
#3
.036-.175
.150
5,000
1100
1128000
10-16 x 3/4"
5/16" HWH
#3
.036-.175
.325
5,000
1129000
1129000
10-16 x 1"
5/16" HWH
#3
.036-.175
.575
5,000
1130000
1130000
10-16 x 1-1/4"
5/16" HWH
#3
.036-.175
.825
4,000
1131000
1131000
10-16 x 1-1/2"
5/16" HWH
#3
.036-.175
.1075
3,000
- Clips, duct straps, brick ties or
accessories to steel framing
B5
PERFORMANCE TABLES
Sheet Steel Gauges
GAUGE NO.
12
14
16
18
20
22
24
26
Nominal Decimal Equivalent (Inch)
.105
.075
.060
.048
.036
.030
.024
.018
Pullout Values
(avg. lbs. ultimate)
FASTENER
STEEL GAUGE (lbs.)
DIA.
PT
26
24
22
20
18
16
14
12
#6
2
120
183
248
296
471
679
847
-----
#8
2
119
193
265
298
491
703
959
-----
1
148
241
311
357
565
826
1111
1796
3
124
208
266
299
499
708
967
1474
#12
1
159
261
338
390
649
908
1259
1949
1/4
1
208
329
428
562
800
1151
-----
-----
#10-16
Shear Values
FASTENER
STEEL GAUGE (lapped)
DIA.
PT
26
24
22
20
18
16
14
#6
2
278
466
526
758
845
-----
-----
#8
2
294
496
560
740
1060
-----
-----
1
398
584
659
884
1374
-----
-----
3
-----
455
526
728
1266
1540
1552
#12
1
432
703
753
1018
1452
-----
-----
1/4
1
511
849
885
1244
1764
-----
-----
#10
Fastener Values
FASTENER
(dia-tpi)
TENSILE
(lbs. min)
SHEAR
(avg. lbs. ult.)
TORQUE
(min. in. lbs.)
6-20
1285
750
25
8-18
1545
1000
42
10-16
1936
1400
61
10-24
2702
1500
65
12-14
2778
2000
92
1/4-14
4060
2600
150
The values listed are ultimate averages achieved under laboratory conditions and apply to Buildex manufactured fasteners only.
Appropriate safety factors should be applied to these values for design purposes.
B6
TEKS®
Medium Duty Steel-To-Steel Applications—
Self-Drilling
Fasteners
The Best Point
Ever for Speed
and Consistency
Point has precise cutting edges to improve drill performance with less effort.
TEKS
Self-Drilling
Drills and taps in the broadest range of applications.
Fasteners
Climaseal® finish provides excellent corrosion resistance and lower tapping
torque.
SPECIFICATIONS
Diameter / 12-14
Thread Form 1/4-14
Head Styles
Hex Washer Head Hex Washer Head with
(HWH)
Serrations (HWHS)
Drill Point
Teks 1
Finish
Type
Teks 2
Kesternich Results
(DIN 50018, 2.OL)
Teks 3
Salt Spray Results
(ASTM B117)
Electro-zinc (EZ)
B7
TEKS Medium Duty Steel-To-Steel Applications
APPROVALS/LISTINGS
APPLICATIONS
Roof deck to steel framing.
Wall panel to girt.
ICBO 3056
Duct work to steel framing.
ICC - ESR 1976
Accessories to steel framing
Clip to steel framing.
DRILL POINTS
Retrofit framing.
Teks 1
Commercial overhead steel doors,
hinges & latches.
Teks 2
Teks 3
12.72mm 12.72mm
.500 .500
.500
9.51mm
.375
.400
6.36mm 6.36mm
.300
5.3mm 4.17mm 5.3mm 5.3mm
.210 .175 .210 .210
.200
.250 .250
2.5mm
2.4mm 2.4mm 2.4mm
.100 .095 .095 .095 .100
.030
.018 .018 .018
.0 .45mm
.45mm .45mm
Point
Teks/1
.125 .125 .125 .125 .125
3.18mm 3.18mm 3.18mm 3.18mm 3.18mm
.036 .036 .036 .036 .036
.91mm .91mm .91mm .91mm .91mm
#8 #12
Teks/2
#10 #12 1/4 #12 1/4 #12 #12 1/4
Teks/3
SELECTION CHART
TEKS® Fasteners
B8
Finish: Electro-zinc Plating.
PART
NUMBER
REFERENCE
NUMBER
DESCRIPTION
HEAD STYLE
DRILL
POINT
DRILL & TAP
CAPACITY
MAX. MATERIAL
ATTACHMENTS
BOX
QTY
113401
113401
12-14 x 3/4"
5/16" HWH
#3
.036-.210
.270
5,000
- Duct work to steel framing
113601
113601
12-14 x 1"
5/16" HWH
#3
.036-.210
.520
4,000
- Accessories to steel framing
112001
112001
12-14 x 1-1/4"
5/16" HWH
#3
.036-.210
.550
4,000
- Clip to steel framing
112301
112301
12-14 x 1-1/2"
5/16" HWH
#3
.036-.210
.800
2,500
114001
114001
12-14 x 2"
5/16" HWH
#3
.036-.210
1.450
2,000
114301
114301
12-14 x 3"
5/16" HWH
#3
.036-.210
2.450
1,000
114701
114701
1/4-14 x 3/4"
3/8" HWH
#3
.036-.210
.210
3,000
114901
114901
1/4-14 x 1"
3/8" HWH
#3
.036-.210
.400
2,500
115001
115001
1/4-14 x 1-1/4"
3/8" HWH
#3
.036-.210
.650
2,000
115201
115201
1/4-14 x 1-1/2"
3/8" HWH
#3
.036-.210
.900
2,000
115501
115501
1/4-14 x 2"
3/8" HWH
#3
.036-.210
1.400
1,500
115701
115701
1/4-14 x 3"
3/8" HWH
#3
.036-.210
2.400
1,000
APPLICATIONS
SELECTION CHART
TEKS® Fasteners
PART
REFERENCE
NUMBER NUMBER
DESCRIPTION
HEAD STYLE
DRILL
POINT
1134000
12-14 x 3/4"
5/16" HWH
#3
.036-.210
.270
5,000
1136000
12-14 x 1"
5/16" HWH
#3
.036-.210
.520
4,000
1420
1136000
P
P
P
DRILL & TAP MAX. MATERIAL
CAPACITY
ATTACHMENTS
BOX
QTY
“P”
PAK QTY
APPLICATIONS
100
1120000
1120000
12-14 x 1-1/4"
5/16" HWH
#2
.036-.210
.550
4,000
1590
1123000
12-14 x 1-1/2"
5/16" HWH
#2
.036-.210
.800
2,500
1620
1140000
12-14 x 2"
5/16" HWH
#3
.036-.210
1.450
2,000
1553000
1553000
12-14 x 2-1/2"
5/16" HWH
#3
.036-.210
1.950
1,000
1143000
1143000
12-14 x 3"
5/16" HWH
#3
.036-.210
2.450
1,000
1790
1399000
1/4-14 x 7/8”
5/16" HWH
#1
.018-.095
.380
5,000
- Stitching roof deck, wall
panel sidelaps or duck work
1820
1147000
1/4-14 x 3/4"
3/8" HWH
#3
.036-.210
.270
3,000
1850
1149000
1/4-14 x 1"
3/8" HWH
#3
.036-.210
.520
2,500
1150000
1150000
1/4-14 x 1-1/4"
3/8" HWH
#3
.036-.210
.550
2,000
1890
1152000
1/4-14 x 1-1/2"
3/8" HWH
#3
.036-.210
.800
2,000
1920
1155000
1/4-14 x 2"
3/8" HWH
#3
.036-.210
1.450
1,500
P
P
1554000
1554000
1/4-14 x 2-1/2"
3/8" HWH
#3
.036-.210
1.950
1,000
1950
1157000
1/4-14 x 3"
3/8" HWH
#3
.036-.210
2.450
1,000
1304000
1304000
1/4-14 x 4"
3/8" HWH
#3
.036-.210
3.450
500
100
Available in P PAK
Finish: Climaseal Coating and Serrations Under Head.
Medium Duty Steel-To-Steel Applications.
TEKS® Fasteners
PART
NUMBER
REFERENCE
NUMBER
DESCRIPTION
HEAD STYLE
DRILL
POINT
DRILL & TAP
CAPACITY
MAX. MATERIAL
ATTACHMENTS
BOX
QTY
APPLICATIONS
1586000
1586000
1/4-14 x 3/4"
7/16" HWHS*
#3
.036-.210
.270
3,000
- Commercial overhead steel
doors, hinges and latches
*With serrations under head
B9
PERFORMANCE TABLES
Sheet Steel Gauges
GAUGE NO.
12
14
16
18
20
22
24
26
.105
.075
.060
.048
.036
.030
.024
.018
Pullout Values
FASTENER
DIA.
#12
1/4
STEEL GAUGE (lbs.)
PT
26
24
22
20
18
16
14
12
3/16
2
156
243
283
375
605
848
1181
1856
3520
3
142
211
289
341
551
757
1063
1631
2998
3
141
231
293
346
613
880
1145
1858
4550
Shear Values
FASTENER
DIA.
#12
1/4
PT
26
24
22
20
18
16
14
12
2
365
600
623
898
1370
1758
2138
2202
3
-----
-----
-----
769
1358
1620
1970
1986
3
-----
-----
-----
930
1442
2100
2584
2650
Fastener Values
FASTENER
(dia-tpi)
TENSILE
(lbs. min)
SHEAR
(avg. lbs. ult.)
TORQUE
(min. in. lbs.)
12-14
2778
2000
92
1/4-14
4060
2600
150
B 10
TEKS®
Self-Drilling
Fasteners
First in
Performance!!
Over 30 Years of
Consistent Drilling
Heavy Duty Steel-To-Steel Applications—
THE ORIGINAL SELF-DRILLERS FOR HEAVY DUTY APPLICATIONS
Unique double fluted point has precise cutting edges to improve drill
performance in 1/4’’ thru 1/2’’ steel.
TEKS
Engineered for fast drilling and smooth tapping with less effort.
Self-Drilling
Climaseal® finish provides excellent corrosion resistance and lower
Fasteners
tapping torque.
Attachments up to 7.2’’ of material including 1/2’’ steel.
1/4 Diameter has notched threads to reduce tapping torque.
SPECIFICATIONS
Diameter / 12-24
Thread Form 1/4-28
Head Styles
Hex Washer Head
(HWH)
Drill Point
Teks 4
Finish
Type
Teks 4.5
Kesternich Results
(DIN 50018, 2.OL)
Teks 5
Salt Spray Results
(ASTM B117)
(Maximum 1800 RPM is recommended for Teks 5 fasteners)
B 11
TEKS Heavy Duty Steel-To-Steel Applications
APPROVALS/LISTINGS
APPLICATIONS
Metal deck to structural steel or bar joist.
Clips to structural steel or bar joist.
ICBO 3056
Liner panels to structural steel or bar joist.
ICC - ESR 1976
Accessories to structural steel or bar joist.
DRILL POINTS
Longer length fasteners can be used in
retrofit clip and sheet applications.
Teks 4
Teks 4.5
Teks 5
12.72mm 12.72mm
.500 .500
.500
9.51mm
.375
.400
6.36mm 6.36mm
.300
5.3mm 4.17mm 5.3mm 5.3mm
.210 .175 .210 .210
.200
.250 .250
2.5mm
2.4mm 2.4mm 2.4mm
.100 .095 .095 .095 .100
.030
.018 .018 .018
.0 .45mm
.45mm .45mm
.125 .125 .125 .125 .125
3.18mm 3.18mm 3.18mm 3.18mm 3.18mm
.036 .036 .036 .036 .036
.91mm .91mm .91mm .91mm .91mm
Point
Teks/1
#8 #12
Teks/2
#10 #12 1/4 #12 1/4 #12 #12 1/4
Teks/3
SELECTION CHART
TEKS® Fasteners
PART
REFERENCE
NUMBER NUMBER
P
B 12
DESCRIPTION
HEAD STYLE
DRILL DRILL & TAP MAX. MATERIAL
POINT CAPACITY
ATTACHMENTS
BOX
QTY
“P”
PAK QTY
100
1650 P
1088000 P
12-24 x 7/8"
5/16" HWH
#4
.125-.250
.325
5,000
1414000
1414000
12-24 x 1-1/4"
5/16" HWH
#4.5
.125-.375
.575
4,000
1670 P
1006000 P
12-24 x 1-1/4"
5/16" HWH
#5
.125-.500
.375
4,000
100
1680
P
1070000
P
12-24 x 1-1/2"
5/16" HWH
#5
.125-.500
.625
2,500
100
1690
P
1072000
P
12-24 x 2"
5/16" HWH
#5
.125-.500
1.125
2,000
100
1074000
1074000
1/4-28 x 3"
5/16" HWH
#5
.125-.500
2.150
1,000
1075000
1075000
1/4-28 x 4"
5/16" HWH
#5
.125-.500
3.150
500
1641000
1641000
1/4-28 x 5"
3/8" HWH
#5
.125-.500
4.150
250
1431000
1431000
1/4-28 x 6"
3/8" HWH
#5
.125-.500
5.150
250
1590000
1590000
1/4-28 x 8"
3/8" HWH
#5
.125-.500
7.150
150
Available in P PAK
B
APPLICATIONS
- Metal deck, clips, linear
panels or accessories to
structural steel or bar joist
- Retrofit clip and sheet
applications
Available in B PAK
TEKS Heavy Duty Steel-To-Steel Applications
PERFORMANCE TABLES
Sheet Steel Gauges
GAUGE NO.
12
14
16
18
20
22
24
26
.105
.075
.060
.048
.036
.030
.024
.018
Pullout Values
FASTENER
DIA.
#12
1/4
STEEL GAUGE (lbs.)
PT
16
14
12
3/16
1/4
4
-----
-----
1532
3485
4013
4.5
-----
-----
1508
3865
4101
5
-----
-----
1527
3701
3999
5
-----
-----
1507
3300
5059
Shear Values
FASTENER
DIA.
#12
1/4
PT
16
14
12
1/8
1/4
4
-----
-----
2048
2030
-----
4.5
-----
-----
2641
2887
2897
5
-----
-----
2650
2700
2762
5
1597
2005
2350
2792
3310
Fastener Values
FASTENER
(dia-tpi)
PT
TENSILE
(lbs. min)
SHEAR
(avg. lbs. ult.)
TORQUE
(min. in. lbs.)
12-24
4
3020
2100
100
12-24
4.5
3165
2200
150
12-24
5
3020
2100
150
1/4-28
5
5577
3310
234
NOTE: Teks fasteners are not categorized as structural bolts. Proper design criteria and strengths must be used for satisfactory application.
B 13
TEKS®
SELECT
Metal to Steel Fasteners
Metal-To-Steel Applications—
Precision engineered self-drilling point drills and taps up to 50% faster than competitive fasteners.
Hardened point and lead threads (HRC 52 min.) provide superior drilling and tapping capabilities.
Ductile (HRC 28 – 34) load-bearing threads prevent HASCC brittle failures.
Resists hydrogren assisted failure equal to a Grade 5 fastener.
Selectively
Hardened
Structural
Fasteners for
Dissimilar Metal
Attachments
Climaseal ACR (Advanced Corrosion Resistance) corrosion resistant finish provides the industry’s highest
level of corrosion resistance.
Unique BX headmark
for easy identification.
Provides maximum
resistance to hydrogren
embrittlement failures.
SPECIFICATIONS
Diameter / 10-16
Thread Form 12-14
1/4-14
1/4-20
Head Styles
Hex Washer Head
(HWH)
Drill Point
Teks 3
Finish
Type
Philips Flat Head
(UPFH)
Teks 4
Salt Spray Results
(ASTM B117)
Climaseal ACR™
1,000 hours - 0% red rust
corrosion-resistant finish
1. May be installed using a standard screw gun with depth sensitive nosepiece. For optimal fastener
performance, the screw gun should be a minimum of 6 amps and have an RPM range of 1800 to
2500 RPM .
B 14
TEKS Metal-To-Steel Applications
DRILL POINTS
APPLICATIONS
Aluminum-to-Aluminum fastening
applications.
Teks 3
Aluminum-to-Steel fastening
applications.
Teks 4
Curtain walls, store fronts, and
window wall systems.
12.72mm 12.72mm
Aluminum sunshades & standouts.
Brick veneer anchoring.
.500 .500
.500
9.51mm
.375
.400
6.36mm 6.36mm
.300
5.3mm 4.17mm 5.3mm 5.3mm
.210 .175 .210 .210
.200
.250 .250
2.5mm
2.4mm 2.4mm 2.4mm
.100 .095 .095 .095 .100
.030
.018 .018 .018
.0 .45mm
.45mm .45mm
Point
Teks/1
.125 .125 .125 .125 .125
3.18mm 3.18mm 3.18mm 3.18mm 3.18mm
.036 .036 .036 .036 .036
.91mm .91mm .91mm .91mm .91mm
#8 #12
Teks/2
#10 #12 1/4 #12 1/4 #12 #12 1/4
Teks/3
SELECTION CHART
TEKS® SELECT
Finish: Steel Alloy with Climaseal ACR™ Finish
PART
REFERENCE
DESCRIPTION
NUMBER NUMBER
HEAD
STYLE
DRILL
POINT
DRILL & TAP
CAPACITY
MAX. LOAD
BEARING AREA
BOX
QTY
APPLICATIONS
1076000
1076000
10-16 x 3/4"
HWH
#3
.150
.500"
5,000
1112000
1112000
12-44 x 7/8"
HWH
#3
.187
.470"
5,000
- Aluminum-to-Aluminum fastening applications.
1080000
1080000
12-14 x 1"
HWH
#3
.187
.500"
4,000
- Aluminum-to-Steel fastening
applications.
1114000
1114000
12-14 x 1-1/2"
HWH
#3
.187
1.000"
2,500
- Curtain walls, store fronts, and
window wall systems.
1117000
1117000
12-14 x 2"
HWH
#3
.187
1.500"
2,000
- Aluminum sunshades & standouts.
1119000
1119000
1/4-14 x 1"
HWH
#3
.210
.450"
2,500
- Brick veneer anchoring.
1121000
1121000
1/4-14 x 1-1/2"
HWH
#3
.210
.960"
2,000
1124000
1124000
1/4-20 x 1-1/8"
HWH
#4
.210-.312
.500"
2,000
1125000
1125000
1/4-20 x 1-1/2"
HWH
#4
.210-.312
.830"
2,000
1078000
1078000
1/4-20 x 2"
HWH
#4
.210-.312
1.330"
1,500
1126000
1126000
1/4-20 x 2-1/2"
HWH
#4
.210-.312
1.830"
1,000
1132000
1132000
12-14 x 1"
UPFH
#3
.187
.500"
4,000
B 15
TEKS Metal-To-Steel Applications
PERFORMANCE TABLES
Test Material Yield (ksi)
STEEL GAUGE
ALUMINUM 6063-T5
18
16
14
12
1/8
3/16
1/4
5/16
1/8
1/4
3/8
97.7
111.2
97.9
117.6
56.9
65.0
48.1
49.1
32.4
32.1
27.2
Pullout Values
FASTENER
STEEL GAUGE (lbs.)
ALUMINUM 6063-T5
DIA.
PT
HEAD
18
16
14
12
1/8
3/16
1/4
5/16
1/8
1/4
3/8
#10-16
3
HWH
605
822
958
2060
2183
-----
-----
-----
745
-----
-----
#12-14
3
HWH
551
884
1099
1943
2149
3044
-----
-----
1008
2543
-----
#12-14
3
UPFH
551
884
1099
1943
2149
2497
-----
-----
1008
2462
-----
1/4-14
3
HWH
777
1095
1205
2196
2320
4110
-----
-----
1017
3080
-----
1/4-20
4
HWH
-----
1054
1357
2266
2212
3304
4719
4699
970
2760
3851
Shear Values
FASTENER
STEEL GAUGE
ALUMINUM 6063-T5
DIA.
PT
HEAD
18-18
#10-16
3
HWH
1523
1645
1522
-----
-----
-----
-----
1526
-----
#12-14
3
HWH
1613
2185
1828
1888
-----
-----
-----
1846
2488
#12-14
3
UPFH
1613
2185
1828
1888
-----
-----
-----
1846
2180
1/4-14
3
HWH
1838
2520
2478
2524
2636
-----
-----
2087
3328
1/4-20
4
HWH
1876
2730
2364
2460
2748
2881
2742
2106
3062
18-14
16-16
14-14
1/8-3/16
3/16-1/4
12-1/4
1/8-1/8
1/8-1/4
Mechanical
Properties
YIELD STRENGTH, F, Ksi (MPa)
TENSILE STRENGTH F, Ksi (MPa)
134 ksi
152 ksi
920 Mpa
1045 Mpa
B 16
TEKS®
Self-Drilling
Fasteners
Low Profile
Architectural
Metal Roof Clip
Fasteners
Low Profile Architectural Metal Roof Clip
Fastener—
INCORPORATES THE ITW EXCLUSIVE PHILLIPS SQUARE-DRIV® ANTI-CAM-OUT SYSTEM
#12 diameter utilizes the ITW exclusive Phillips Square-Driv with patented
interlocking components system.
- Excellent installation stability.
- Extended bit driver life.
- Keeps the driver securely mated to the fastener during installation.
- Hands-free installation.
#10 Diameter uses the coated Phillips drive system providing improved driver
bit to fastener stability and friction fit.
Both fasteners are finished with a corrosion resistant coating. Teks 3 fasteners are available with Gray
Spex™ coating; Type A fasteners with Climacoat®.
Sharp convex drill point has precise cutting edges to improve drill performance with less effort.
Low profile pancake head style ensures proper installation of metal roof panels.
SPECIFICATIONS
Diameter / 10-16
Thread Form 12-14
Head Styles
Phillips Pan
Pancake Head (PPH)
Phillips Square-Div
Pancake (PSP)
Drill Point
Teks 3
Finish
Type
Kesternich Results
(DIN 50018, 2.OL)
Climacoat
Grey Specx
20 cycles - 10% or less red rust 500 hours - 10% or less red rust
Type A
Salt Spray Results
(ASTM B117)
fastener performance, the screwgun should be a minimum of 6 amps and have a RPM range of
0-2500.
B 17
TEKS Low Profile Architectural Metal Roof Clip Fastener
DRILL POINTS
APPLICATIONS
Teks 3
Low profile architectural metal roof clips to
steel purlin.
Type A
Low profile architectural metal roof clips to
wood supports.
12.72mm 12.72mm
.500 .500
.500
9.51mm
.375
.400
6.36mm 6.36mm
.300
5.3mm 4.17mm 5.3mm 5.3mm
.210 .175 .210 .210
.200
.250 .250
2.5mm
2.4mm 2.4mm 2.4mm
.100 .095 .095 .095 .100
.030
.018 .018 .018
.0 .45mm
.45mm .45mm
Point
Teks/1
.125 .125 .125 .125 .125
3.18mm 3.18mm 3.18mm 3.18mm 3.18mm
.036 .036 .036 .036 .036
.91mm .91mm .91mm .91mm .91mm
#8 #12
Teks/2
#10 #12 1/4 #12 1/4 #12 #12 1/4
Teks/3
SELECTION CHART
TEKS® Fasteners
Finish: Gray Spex Coating.
PART
NUMBER
REFERENCE
NUMBER
DESCRIPTION
HEAD
STYLE
DRILL
POINT
DRILL & TAP
CAPACITY
MAX. MATERIAL
ATTACHMENTS
BOX
QTY
1560553
1560553
10-16 x 1"
#2 PPH
#3
.036-.175
.550
4,000
1575553
1575553
12-14 x 1"
#2 PSD
#3
.036-210
.550
4,000
TEKS® Fasteners
B 18
APPLICATIONS
- Low profile architectural metal
roof clip to steel purlin
Finish: Climacoat Coating.
PART
NUMBER
REFERENCE
NUMBER
DESCRIPTION
HEAD
STYLE
DRILL
POINT
DRILL & TAP
CAPACITY
MAX. MATERIAL
ATTACHMENTS
BOX
QTY
1596553
1596553
10-12 x1"
#2 PPH
A
.012-.048
.250
4,000
1597553
1597553
12-11 x 1"
#2 PSD
A
.012-.048
.250
4,000
1588910
1588910
#2 PSD Bit
APPLICATIONS
- Low profile architectural metal
roof clip to wood supports
1
TEKS Low Profile Architectural Metal Roof Clip Fastener
PERFORMANCE TABLES
Sheet Steel Gauges
GAUGE NO.
12
14
16
18
20
22
24
26
.105
.075
.060
.048
.036
.030
.024
.018
Pullout Values
FASTENER
STEEL GAUGE (lbs.)
DIA.
PT
26
24
22
20
18
16
14
12
#10
3
109
180
218
278
427
583
873
1406
#12
3
139
194
250
369
450
598
915
1500
#10
TYPE A
192
280
360
460
568
-----
-----
-----
#12
TYPE A
193
300
387
464
621
-----
-----
-----
Pullout Values
FASTENER
WOOD TYPE AND THICKNESS
DIA.
PT
1/2” PLYWOOD
5/8” PLYWOOD
3/4” PLYWOOD
YELLOW PINE
3/4” OSB
#10
TYPE A
364
382
400
579
288
#12
TYPE A
377
395
427
675
326
Shear Values
FASTENER
DIA.
PT
20 GAUGE
18 GAUGE
16 GAUGE
14 GAUGE
#10
3
727
1164
1366
1460
#12
3
923
1279
1657
1933
Fastener Values
FASTENER
(dia-tpi)
PT
TENSILE
(lbs. min)
SHEAR
(avg. lbs. ult.)
TORQUE
(min. in. lbs.)
10-16
3
1983
1400
78
12-14
3
2652
2000
92
10-12
TYPE A
2581
1426
81
12-11
TYPE A
3634
1994
132
B 19
TEKS®
Wood-To-Metal Applications—
Wood to Metal
Fasteners
No Pre-Drilling,
Fast, Efficient
Attachment of
Wood-To-Metal
TEKS
Wood to
Metal
Self-Drilling
Fasteners
Special winged fasteners ream a hole in wood preventing thread engagement
during drilling.
Wafer head design has a large bearing surface ideal for plywood.
Flat head design countersinks and seats flush in wood.
Gray Spex™ finish provides excellent corrosion resistance and lower tapping
torque.
Compatible with ACQ treated wood.
SPECIFICATIONS
Diameter / 10-16
Thread Form 10-24
12-14
1/4-14
Head Styles
Socket Wafer
Head (SW)
Philips Flat Head
(PFH)
Philips Square-Div
(PSD)
Drill Point
Teks 3
Finish
Type
Kesternich Results
(DIN 50018, 2.OL)
Salt Spray Results
(ASTM B117)
Electro-zinc (EZ)
Grey Specx
Teks 4
fastener performance, the screwgun should be a minimum of 6 amps and have an RPM range of 0-2500.
3. Worn or damaged bit tip should be replaced.
7. All #10 diameter “Winged” parts must be driven into a minimum of 16 GA steel thickness.
8. All 1/4 and #12 diameter “Winged” parts must be driven into a minimum of 1/8” steel in order to break
the wings consistently.
B 20
TEKS Wood-To-Metal Applications
DRILL POINTS
APPLICATIONS
Teks 3
Plywood roof and floor sheet to steel frames.
2 x 4 headers to steel frames.
Teks 4
Plywood fascia to steel frames.
12.72mm 12.72mm
.500 .500
.500
9.51mm
.375
.400
6.36mm 6.36mm
.300
5.3mm 4.17mm 5.3mm 5.3mm
.210 .175 .210 .210
.200
2.5mm
2.4mm 2.4mm 2.4mm
.100 .095 .095 .095 .100
.030
.018 .018 .018
.0 .45mm
.45mm .45mm
Point
Teks/1
TEKS® Fasteners
21320
B
21350
B
HEAD
STYLE
DRILL
POINT
DRILL & TAP WOOD ATTACHMENT
CAPACITY
RANGE
BOX
QTY
“B”
PAK QTY
APPLICATIONS
- Plywood, mansard, fascia,
roofing, flooring to steel framing
10-24 x 3/4"
#2 SW
#3
.036-.175
1/4"-3/8"
8,000
500
21320
B
10-24 x 1"
#2 SW
#3
.036-.175
1/4"-1/2"
5,000
500
21350
B
10-24 x 1-1/4"
#2 SW
#3
.036-.175
1/4"-3/4"
3,000
250
11-16 x 3/4"
#2 SW
#3
.036-.175
1/4"-7/16"
7,000
11-16 x 1-14"
#2 SW
#3
.036-.175
1/4"-15/16"
4,000
2650
2650
2670
2670
B
Available in B PAK
Finish: Electro-zinc Plating. With Wings.
PART
REFERENCE
HEAD
DESCRIPTION
NUMBER NUMBER
STYLE
21380 P B
21380 P B
21730 P
21730 P
21750
P
21750
P
21751
P
21751
P
21760
#10 #12 1/4 #12 1/4 #12 #12 1/4
Teks/3
21290
TEKS® Fasteners
P
#8 #12
Teks/2
B
Available in P PAK
P
.036 .036 .036 .036 .036
.91mm .91mm .91mm .91mm .91mm
Finish: Electro-zinc Plating. Without Wings.
PART
REFERENCE
DESCRIPTION
NUMBER NUMBER
21290
.125 .125 .125 .125 .125
3.18mm 3.18mm 3.18mm 3.18mm 3.18mm
SELECTION CHART
B
.250 .250
10-24 x 1-1/2" #2 SW
Available in P PAK
B
BOX
QTY
“P”
“B”
PAK QTY PAK QTY
#3
.036-.175
1/4"-1"
3,000
100
#3 SW
#4
.125-.250
1/4" - 1"
2,000
100
12-24 x 2-1/2" #3 SW
#4
.125-.250
1/4"-1-1/2"
1,500
100
100
12-24 x 2"
21760
DRILL DRILL & TAP WOOD ATTACHMENT
POINT CAPACITY
RANGE
12-24 x 3"
#3 SW
#4
.125-.250
1/4"-2"
1,000
12-24 x 4"
#3 SW
#4
.125-.250
1/4"-3"
500
250
APPLICATIONS
- Plywood, 2 x 4’s to steel
framing
Available in B PAK
TEKS® Fasteners
Finish: Gray Spex Coating. Without Wings.
PART
NUMBER
REFERENCE
NUMBER
DESCRIPTION
HEAD
STYLE
DRILL
POINT
DRILL & TAP
CAPACITY
WOOD ATTACHMENT
RANGE
BOX
QTY
1077000
1077000
10-24 x 3/4"
#2 PSD WAFER
#3
.036-.175
1/4"-3/8"
8,000
1079000
1079000
10-24 x 1"
#2 PSD WAFER
#3
.036-.175
1/4"-1/2"
5,000
1791000
1791000
10-16 x 1-13/16"
#2 PFH*
#3
.036-.175
1/4"-3/4"
2,500
APPLICATIONS
- Plywood, mansard, fascia,
roofing, flooring to steel
framing
* With Serrations Under Head
B 21
TEKS Wood-To-Metal Applications
SELECTION CHART
TEKS® Fasteners
Finish: Gray Spex Coating. With Wings.
PART
NUMBER
REFERENCE
NUMBER
DESCRIPTION
HEAD
STYLE
DRILL
POINT
DRILL & TAP
CAPACITY
WOOD ATTACHMENT
RANGE
BOX
QTY
APPLICATIONS
1082000
1082000
10-24 x 1-7/16"
#2 PFH
#3
.060-.175
1/4"-3/4"
3,000
- Plywood, 2 x 4’s to steel framing
1094000
1094000
12-24 x 2-3/4"
#3 PFH
#4
.125-.250
3/4"-1-5/8"
1,500
1980
1096000
1/4-20 x 3"
#3 PFH
#4
.125-.250
3/4"-2"
1,000
PERFORMANCE TABLES
Sheet Steel Gauges
GAUGE NO.
12
14
16
18
20
22
24
26
.105
.075
.060
.048
.036
.030
.024
.018
Pullout Values
FASTENER
STEEL GAUGE (lbs.)
DIA.
PT
26
24
22
20
18
16
14
12
3/16
1/4
#10-16
3
-----
208
266
299
499
708
967
1474
-----
-----
#10-24
3
-----
-----
-----
334
495
702
900
1570
3865
4101
#12
4
-----
-----
-----
-----
-----
-----
-----
1508
4297
-----
1/4
4
-----
-----
-----
-----
-----
-----
-----
1803
-----
-----
Shear Values
FASTENER
DIA.
PT
20
18
16
14
12
1/8
#10
3
728
1266
1540
1522
-----
-----
#12
4
-----
-----
-----
-----
2048
2030
1/4
4
-----
-----
-----
-----
2650
2820
Fastener Values
FASTENER
(dia-tpi)
TENSILE
(lbs. min)
SHEAR
(avg. lbs. ult.)
TORQUE
(min. in. lbs.)
10-16
1936
1400
61
10-24
2702
1500
65
12-24
3165
2200
150
1/4-20
3860
2700
168
B 22
TEKS®
Metal Roof and Wall Applications—
with Bonded
Washer
For Weather-Tight
Sealing of Roof and
Wall Applications
Vulcanized bonding of washer eliminates separation of EPDM from the metal
backing.
TEKS
with
Bonded
Washer
Dual sealing bonded washer prevents leaks.
Climaseal® finish provides excellent corrosion resistance and lower tapping
torque.
SPECIFICATIONS
Diameter / 10-16
Thread Form 12-14
12-24
1/4-14
1/4-28
Head Styles
Hex Washer Head with
Bonded Washer(HWH)
Washer Style Galvanized (G-90)
Drill Point
Finish
Teks 1
Teks 2
Teks 4
Teks 5
Type
Kesternich Results
(DIN 50018, 2.OL)
Teks 3
Salt Spray Results
(ASTM B117)
fastener performance, the screw gun should be a minimum of 6 amps and have an RPM range of
0-2500.
2. New magnetic sockets must be correctly set before use Remove chip build-up as needed.
B 23
TEKS Metal Roof and Wall Applications
DRILL POINTS
APPLICATIONS
Roof panels to purlin or bar joist.
Wall panels to girt.
Mansard panel to structural.
Teks 1
Teks 1
Teks 2
Teks 5
Teks 3
12.72mm 12.72mm
PROPERLY SEATED WASHERS
Correctly Driven
Underdriven
.500 .500
.500
Overdriven
9.51mm
.375
.400
6.36mm 6.36mm
.300
5.3mm 4.17mm 5.3mm 5.3mm
.210 .175 .210 .210
.200
2.5mm
2.4mm 2.4mm 2.4mm
.100 .095 .095 .095 .100
.030
.018 .018 .018
.0 .45mm
.45mm .45mm
Point
Teks/1
SELECTION CHART
.125 .125 .125 .125 .125
3.18mm 3.18mm 3.18mm 3.18mm 3.18mm
.036 .036 .036 .036 .036
.91mm .91mm .91mm .91mm .91mm
#8 #12
Teks/2
#10 #12 1/4 #12 1/4 #12 #12 1/4
Teks/3
TEKS® w/Bonded Washer
B 24
.250 .250
PART
NUMBER
REFERENCE
NUMBER
DESCRIPTION
HEAD
STYLE
WASHER
DIAMETER
DRILL
POINT
CAPACITY
ATTACHMENTS
BOX
QTY
1005000
1005000
10-16 x 3/4"
5/16" HWH
9/16"
#3
.036-.175
.205
3,000
1420W
1009000
12-14 x 3/4"
5/16" HWH
9/16"
#3
.036-.210
.150
3,000
- Brick tie to steel
framing
1490W
1011000
12-14 x 1"
5/16" HWH
9/16"
#3
.036-.210
.400
3,000
- Mansard panel to
steel framing
1590W
1404000
12-14 x 1-1/2"
5/16" HWH
9/16"
#2
.036-.210
.680
2,000
- Roof panel to purlin
1620W
1016000
12-14 x 2"
5/16" HWH
9/16"
#3
.036-.210
1.330
1,500
- Stitch roof
1333000
1333000
12-14 x 3"
5/16" HWH
9/16"
#3
.036-.210
2.330
1,000
1790W
1416000
1/4-14 x 7/8"
5/16" HWH
9/16"
#1
.018-.095
.260
3,000
1850W
1160000
1/4-14 x 1"
3/8" HWH
9/16"
#3
.036-.210
.280
2,500
1890W
1020000
1/4-14 x 1-1/2"
3/8" HWH
9/16"
#3
.036-.210
.780
1,500
1920W
1021000
1/4-14 x 2"
3/8" HWH
9/16"
#3
.036-.210
1.280
1,000
1950W
1022000
1/4-14 x 3"
3/8" HWH
9/16"
#3
.036-.210
2.280
750
1429000
1429000
1/4-14 x 4"
3/8" HWH
9/16"
#3
.036-.210
3.280
500
1650W
1010000
12-24 x 7/8"
5/16" HWH
9/16"
#4
.125-.250
.205
3,000
1670W
1000000
12-24 x 1-1/4"
5/16" HWH
9/16"
#5
.125-.500
.255
2,500
1680W
1001000
12-24 x 1-1/2"
5/16" HWH
9/16"
#5
.125-.500
.505
2,000
1690W
1002000
12-24 x 2"
5/16" HWH
9/16"
#5
.125-.500
1.005
1,500
1003000
1003000
1/4-28 x 3"
5/16" HWH
9/16"
#5
.125-.500
2.030
1,000
1004000
1004000
1/4-28 x 4"
5/16" HWH
9/16"
#5
.125-.500
3.030
500
1647000
1647000
1/4-28 x 5"
3/8" HWH
3/4"
#5
.125-.500
4.030
250
1432000
1432000
1/4-28 x 6"
3/8" HWH
3/4"
#5
.125-.500
5.030
250
1619000
1619000
1/4-28 x 8"
3/8" HWH
3/4"
#5
.125-.500
7.030
150
APPLICATIONS
TEKS Metal Roof and Wall Applications
PERFORMANCE TABLES
Sheet Steel Gauges
GAUGE NO.
12
14
16
18
20
22
24
26
.105
.075
.060
.048
.036
.030
.024
.018
Pullout Values
FASTENER
STEEL GAUGE (lbs.)
DIA.
PT
26
24
22
20
18
16
14
12
3/16
1/4
#10
3
124
208
266
299
499
708
967
1474
-----
-----
2
156
243
283
375
605
848
1181
1856
3520
-----
3
142
211
289
341
551
757
1063
1631
2998
-----
#12
#12
1/4
4
-----
-----
-----
-----
-----
-----
-----
1532
3485
3844
4.5
-----
-----
-----
-----
-----
-----
-----
1508
3865
4104
5
-----
-----
-----
-----
-----
-----
-----
1527
3701
3999
1
208
329
428
562
800
1151
-----
-----
-----
-----
3
141
231
293
346
613
880
1145
1877
4550
-----
5
-----
-----
-----
-----
-----
607
918
1507
3300
5059
Shear Values
FASTENER
DIA.
PT
26
24
22
20
18
16
14
12
1/8
1/4
#10
3
-----
445
526
728
1266
1540
1552
-----
-----
-----
2
365
600
623
898
1370
1758
2138
-----
-----
-----
3
-----
-----
-----
769
1358
1620
1970
1986
-----
-----
#12
#12
1/4
4
-----
-----
-----
-----
-----
-----
-----
2048
2030
-----
4.5
-----
-----
-----
-----
-----
-----
-----
2641
2887
-----
5
-----
-----
-----
-----
-----
-----
-----
2650
2700
-----
1
511
849
885
1244
1764
-----
-----
-----
-----
-----
3
-----
-----
-----
930
1442
2100
2584
2650
-----
-----
5
-----
-----
-----
-----
-----
1597
2005
2350
2792
3310
Fastener Values
FASTENER
(dia-tpi)
TENSILE
(lbs. min)
SHEAR
(avg. lbs. ult.)
TORQUE
(min. in. lbs.)
10-16
1936
1400
61
12-14
2778
2000
92
12-24
3020
2100
100
1/4-14
4060
2600
150
1/4-28
5577
3310
234
B 25
MAXISEAL®
Premium Metal Roof and Wall Applications—
Integral
Washer System
Maxiseal ...
The Premium
Sealing System for
Teks® Self-Drilling,
Self-Tapping
Fasteners
Controls the EPDM rubbe washer for improved in place appearance and
increased washer life.
MAXISEAL
Seals when driven at an angle.
Integral
Washer
System
Optimum pullover resistance.
Hex washer head provides excellent driving stability.
Climaseal® finish provides excellent corrosion resistance and lower tapping torque.
SPECIFICATIONS
Diameter / 1/4-14
Thread Form 17-14
Head Styles
Maxiseal Head
Hex Washer Head
(HWH)
Drill Point
Teks 3
Finish
Type
Kesternich Results
(DIN 50018, 2.OL)
Salt Spray Results
(ASTM B117)
3. New magnetic sockets must be correctly set before use. Remove chip build up as needed.
B 26
MAXISEAL® Premium Metal Roof and Wall Applications
APPLICATIONS
Roof panel to purlin and wall panel to girt
Stitching roof, wall, fascia, eave panels or
gutter straps.
Underdriven
Roof and wall panel or accessories over
blanket insulation to steel framing.
#17 diameter replacement for stripped #12
and 1/4 diameter fasteners.
Correctly Driven
Overdriven
DRILL POINTS
Teks 3
12.72mm 12.72mm
.500 .500
.500
9.51mm
.375
.400
6.36mm 6.36mm
.300
5.3mm 4.17mm 5.3mm 5.3mm
.210 .175 .210 .210
.200
.250 .250
2.5mm
2.4mm 2.4mm 2.4mm
.100 .095 .095 .095 .100
.030
.018 .018 .018
.0 .45mm
.45mm .45mm
Point
Teks/1
.125 .125 .125 .125 .125
3.18mm 3.18mm 3.18mm 3.18mm 3.18mm
.036 .036 .036 .036 .036
.91mm .91mm .91mm .91mm .91mm
#8 #12
Teks/2
#10 #12 1/4 #12 1/4 #12 #12 1/4
Teks/3
SELECTION CHART
MAXISEAL® Integral Washer System
Finish: Climaseal Coating
PART
NUMBER
REFERENCE
NUMBER
DESCRIPTION
HEAD
STYLE
WASHER DRILL DRILL & TAP MAX. MATERIAL
DIAMETER POINT CAPACITY
ATTACHMENTS
BOX
QTY
1821W
1042053
1/4-14 x 3/4"
3/8" HWH
9/16"
#3
.036-.210
.200
2,500
1851W
1044000
1/4-14 x 1"
3/8" HWH
9/16"
#3
.036-.210
.310
2,500
1891W
1048000
1/4-14 x 1-1/2"
3/8" HWH
9/16"
#3
.036-.210
.810
2,000
APPLICATIONS
- Sheet or accessories with
blanket insulation to steel
framing
B 27
MAXISEAL® Premium Metal Roof and Wall Applications
PERFORMANCE TABLES
Sheet Steel Gauges
GAUGE NO.
12
14
16
18
20
22
24
26
.105
.075
.060
.048
.036
.030
.024
.018
Pullout Values
FASTENER
STEEL GAUGE (lbs.)
DIA.
PT
26
#10
3
124
208
266
299
499
708
967
1474
-----
-----
2
156
243
283
375
605
848
1181
1856
3520
-----
3
142
211
289
341
551
757
1063
1631
2998
-----
4
-----
-----
-----
-----
-----
697
986
1532
3485
4013
5
-----
-----
-----
-----
-----
-----
-----
1527
3701
3999
1
208
329
428
562
800
1151
-----
1858
4550
-----
#12
1/4
#17
24
22
20
18
16
14
12
3/16
1/4
3
141
231
293
346
613
880
1145
1877
4550
-----
AB
235
365
496
597
702
926
1180
1716
3523
-----
AB
225
261
350
442
553
752
1122
-----
-----
-----
Shear Values
FASTENER
DIA.
PT
26
24
22
20
18
16
14
12
#10
3
-----
445
526
728
1266
1540
1552
-----
#12
1/4
#17
2
365
600
623
898
1370
1758
2138
-----
3
-----
-----
-----
769
1358
1620
1970
1986
4
-----
-----
-----
-----
-----
-----
-----
2048
5
-----
-----
-----
-----
-----
-----
-----
2650
1
511
849
885
1244
1765
-----
-----
-----
3
-----
-----
-----
930
1442
2100
2584
2650
AB
422
482
669
889
1157
-----
-----
-----
AB
459
745
989
958
1415
-----
-----
-----
Fastener Values
FASTENER
(dia-tpi)
TENSILE
(lbs. min)
SHEAR
(avg. lbs. ult.)
TORQUE
(min. in. lbs.)
10-16
1936
1400
61
12-14
2778
2000
92
12-24 T/4
3020
2100
100
12-24 T/5
3188
2200
150
1/4-14
4060
2600
150
17-14
5300
3200
180
B 28
SCOTS®
Long Life Metal Roof and Wall Applications—
Long Life Teks
Fasteners
The Original
Buildex Scots 300
Stainless Steel
Encapsulated
Head will never
rust .... EVER!!!!
For improved appearance and extra life an integral design controls the EPDM
rubber washer
SCOTS
Long
Life Teks
Fasteners
Combines 300 series stainless steel exterior with the strength of carbon steel.
300 series stainless most preferred for galvalume long life panels.
Maximum sealing and corrosion protection.
SPECIFICATIONS
Diameter / 12-14
Thread Form 12-24
1/4-14
Head Styles
Scots Hex Washer Head
(HWH)
Drill Point
Teks 1
Finish
Type
Teks 2
Kesternich Results
(DIN 50018, 2.OL)
Teks 5
Salt Spray Results
(ASTM B117)
1. A standard screwgun with a depth sensitive nosepiece should be
used to install Teks. For optimal
B 29
SCOTS® Long Life Roof and Wall Applications
APPLICATIONS
Panel over blanket insulation to steel frame.
Roof curb to structural steel.
Standing seam roof system endlaps.
Underdriven
Stitch roof and wall sidelaps.
#17 diameter replacement screw for #12 and
1/4 diameter fasteners.
Correctly Driven
Overdriven
DRILL POINTS
Teks 1
Teks 2
Teks 5
12.72mm 12.72mm
.500 .500
.500
9.51mm
.375
.400
6.36mm 6.36mm
.300
5.3mm 4.17mm 5.3mm 5.3mm
.210 .175 .210 .210
.200
.250 .250
2.5mm
2.4mm 2.4mm 2.4mm
.100 .095 .095 .095 .100
.030
.018 .018 .018
.0 .45mm
.45mm .45mm
Point
Teks/1
.125 .125 .125 .125 .125
3.18mm 3.18mm 3.18mm 3.18mm 3.18mm
.036 .036 .036 .036 .036
.91mm .91mm .91mm .91mm .91mm
#8 #12
Teks/2
#10 #12 1/4 #12 1/4 #12 #12 1/4
Teks/3
SELECTION CHART
SCOTS® Fasteners
PART
NUMBER
REFERENCE
DESCRIPTION
NUMBER
1168209
1168253
1163100
1163000
HEAD
STYLE
12-14 x 1-1/2" 5/16" HWH
12-24 x 2"
5/16" HWH
WASHER
DIAMETER
DRILL
POINT
CAPACITY
ATTACHMENTS
BOX
QTY
9/16"
#2
.036-.210
.790
2,000
- Panel over blanket insulation to
steel frame
9/16"
#5
.125-.500
1.000
1,500
- Roof curb to structural steel
APPLICATIONS
- Standing seam roof system
endlaps
1387209
B 30
1387253
1/4-14 x 7/8" 5/16" HWH
9/16"
#1
.018-.095
.320
2,500
- Stitch roof and wall sidelaps.
SSR endlaps
SCOTS® Long Life Roof and Wall Applications
PERFORMANCE TABLES
Sheet Steel Gauges
GAUGE NO.
12
14
16
18
20
22
24
26
.105
.075
.060
.048
.036
.030
.024
.018
Pullout Values
FASTENER
STEEL GAUGE (lbs.)
DIA.
PT
26
24
22
20
18
16
14
12
3/16
1/4
#12
2
156
243
283
375
605
848
1181
1856
3520
-----
#12
5
-----
-----
-----
-----
-----
-----
-----
1527
3701
3999
1/4
5
-----
-----
-----
-----
-----
-----
-----
1507
3300
5059
1/4
#17
1
208
329
428
562
800
1151
-----
-----
-----
-----
AB
235
365
496
597
702
926
1180
1690
3446
4212
AB
225
261
350
442
553
752
1122
1716
3523
4250
Shear Values
FASTENER
DIA.
PT
26
24
22
20
18
16
14
1/8
3/16
1/4
#12
2
365
600
623
898
1370
1758
2138
2202
-----
-----
#12
5
-----
-----
-----
-----
-----
-----
-----
2700
2720
2762
1/4
5
-----
-----
-----
-----
-----
1597
2005
2350
2792
3310
1
511
849
885
1244
1764
-----
-----
-----
-----
-----
AB
422
482
669
889
1157
-----
-----
-----
-----
-----
AB
459
745
989
958
1415
-----
-----
-----
-----
-----
1/4
#17
Fastener Values
FASTENER
(dia-tpi)
TENSILE
(lbs. min)
SHEAR
(avg. lbs. ult.)
TORQUE
(min. in. lbs.)
12-14
2778
2000
92
12-24
3188
2200
130
1/4-14
4060
2600
150
1/4-28
5577
3310
234
17-14
5300
3200
180
B 31
TEKS®
Steel-to-Steel Applications
410 Stainless Steel for corrosive environments.
410 SS
Self Drilling
Fasteners for
Applications
Requiring Extra
Corrosion
Protection
TEKS
Engineered for fast drilling and smooth tapping with less effort.
410
Stainless
Steel
Available with dual sealing bonded washer to prevent leaks.
Silver Climashield™ finish adds extra corrosion protection.
SPECIFICATIONS
Diameter / #8, #10, #12, and 1/4”
Thread Form 8-18
10-16
12-14
1/4-14
Head Styles
Hex Washer Head
(HWH)
Drill Point
Teks 2
Teks 3
Finish
Type
Kesternich Results
(DIN 50018, 2.OL)
Salt Spray Results
(ASTM B117)
410 Stainless Steel
1. A standard screw gun with a depth sensitive nosepiece should be used to install Teks. For optimal
fastener performance, the screw gun should be a minimum of 4 amps and have an RPM range of 0-2500.
2. Adjust the screw gun nosepiece to properly seat the fastener.
B 32
410 Stainless Steel TEKS® Steel-to-Steel Applications
DRILL POINTS
APPLICATIONS
Teks 2
Brick ties to steel framing.
Clips to structural steel or bar joist.
Teks 3
Liner panels to structural steel or bar joist.
12.72mm 12.72mm
.500 .500
.500
9.51mm
.375
.400
6.36mm 6.36mm
.300
5.3mm 4.17mm 5.3mm 5.3mm
.210 .175 .210 .210
.200
.250 .250
2.5mm
2.4mm 2.4mm 2.4mm
.100 .095 .095 .095 .100
.030
.018 .018 .018
.0 .45mm
.45mm .45mm
Point
Teks/1
.125 .125 .125 .125 .125
3.18mm 3.18mm 3.18mm 3.18mm 3.18mm
.036 .036 .036 .036 .036
.91mm .91mm .91mm .91mm .91mm
#8 #12
Teks/2
#10 #12 1/4 #12 1/4 #12 #12 1/4
Teks/3
SELECTION CHART
TEKS® 410 Stainless Steel Fastener
PART
NUMBER
REFERENCE
NUMBER
1897000
Finish: 410 Stainless Steel.
DESCRIPTION
HEAD
STYLE
DRILL
POINT
DRILL & TAP
CAPACITY
MAX. MATERIAL
ATTACHMENTS
BOX
QTY
1897000
8-18 x 1/2"
5/16" HWH
#2
.036-.100
.205
1,000
1830000
1830000
10-16 x 3/4"
5/16" HWH
#3
.036-.175
.325
5,000
1831000
1831000
10-16 x 1"
5/16" HWH
#3
.036-.175
.575
5,000
1834000
1834000
12-14 x 3/4"
5/16" HWH
#3
.036-.210
.270
5,000
1835000
1835000
12-14 x 1"
5/16" HWH
#3
.036-.210
.520
2,500
1837000
1837000
12-14 x 1-1/2"
5/16" HWH
#3
.036-.210
.980
2,000
1843000
1843000
1/4-14 x 1"
3/8" HWH
#3
.036-.210
.410
2,500
1/4-14 x 3/4"
3/8" HWH
#3
.036-.210
.410
2,500
1842000
1842000
APPLICATIONS
- Metal deck, clips, lines or
accessories to structural
steel or bar joist.
- Longer fasteners can be
used in retrofit clip and
sheet applications.•
B 33
410 Stainless Steel TEKS® Steel-to-Steel Applications
PERFORMANCE TABLES
Sheet Steel Gauges
GAUGE NO.
12
14
16
18
20
22
24
26
.105
.075
.060
.048
.036
.030
.024
.018
Pullout Values
FASTENER
STEEL GAUGE (lbs.)
DIA.
PT
26
24
22
20
18
16
14
12
3/16
#8
2
119
193
265
298
491
703
959
-----
-----
#10
3
124
208
266
299
499
708
967
1474
-----
#12
3
131
196
258
312
452
692
1063
1631
2998
1/4
3
141
231
293
346
613
880
1145
1858
4550
Shear Values
FASTENER
DIA.
PT
26
24
22
20
18
16
14
12
#8
2
294
496
560
740
1060
-----
-----
-----
#10
3
-----
455
526
728
1266
1540
1552
-----
#12
3
-----
-----
-----
769
1358
1620
1970
1986
1/4
3
-----
-----
-----
930
1442
2100
2584
2650
Fastener Values
FASTENER
(dia-tpi)
TENSILE
(lbs. min)
SHEAR
(avg. lbs. ult.)
TORQUE
(min. in. lbs.)
8-18
1545
1000
42
10-16
1936
1400
61
12-14
2778
2000
92
1/4-14
4060
2600
150
B 34
Metal -To-Wood Applications—
Non-walking sharp gimlet point for fast material engagement.
Trugrip® GT
The Preferred
Fastener by the
Leading Post
Frame Builders and
Manufacturers
Double lead thread for fast panel pick-up.
Trugrip® GT
Dual sealing bonded washer prevents leaks.
with Bonded
Vulcanized bonding of washer eliminates separation of EPDM from the
Washer
metal backing.
High hat HWH for driving stability.
Climaseal® finish provides excellent corrosion resistance and lower
tapping torque.
SPECIFICATIONS
Diameter / #9
Thread Form #12
#14
Head Styles
Hex Washer Head
w/Bonded Washer
(HWH)
Washer Style Galvanized (G90)
Drill Point
Finish
AB
Type
Kesternich Results
(DIN 50018, 2.OL)
Salt Spray Results
(ASTM B117)
Electro-zinc (EZ)
Climaseal® Coating (CL)
for Trugrip
1. A standard screwgun with a depth sensitive nosepiece should be used to install Trugrip. For optimal
B 35
Trugrip® GT Metal-To-Wood-Applications
APPLICATIONS
Roof and wall panel to wood structure.
Panel over insulation to wood structure.
Stitch roof and wall panel.
Underdriven
Correctly Driven
Overdriven
DRILL POINTS
AB
SELECTION CHART
Trugrip® GT #9 with Bonded Washer
Finish: Climaseal Coating and Electro-Zinc Plating
PART NUMBER
ELECTRO ZINC
PART NUMBER
CLIMASEAL
DESCRIPTION
HEAD
STYLE
WASHER DRILL DRILL & TAP
BOX
QTY
APPLICATIONS
5521
5523
9 x 1"
1/4" HWH
12 mm
AB
26-18 ga.
3,000
AB
26-18 ga.
2,000
- Roof and wall panel to wood
structure.
5541
5543*
9 x 1-1/2"
1/4" HWH
12 mm
5551
5553
9 x 2"
1/4" HWH
12 mm
AB
26-18 ga.
1,500
5561
5563
9 x 2-1/2"
1/4" HWH
12 mm
AB
26-18 ga.
1,000
5571
5573
9 x 3"
1/4" HWH
12 mm
AB
26-18 ga.
1,000
- Panel over insulation to
wood structure.
* Available without bonded washer part number 5743
PART NUMBER
ELECTRO ZINC
PART NUMBER
CLIMASEAL
DESCRIPTION
HEAD
STYLE
1270000
1270000CL
12 x 3/4”
1/4" HWH
B 36
5/8”
AB
26-18 ga.
BOX
QTY
3,000
APPLICATIONS
- Stitch roof and wall panel.
PART NUMBER
ELECTRO ZINC
PART NUMBER
CLIMASEAL
DESCRIPTION
HEAD
STYLE
BOX
QTY
APPLICATIONS
5621
5623
14 x 1"
3/8" HWH
5/8”
AB
26-18 ga.
2,000
AB
26-18 ga.
1,500
- Roof and wall panel to wood
structure.
5631
5633
14 x 1-1/4"
3/8" HWH
5/8”
5641
5643
14 x 1-1/2"
3/8" HWH
5/8”
AB
26-18 ga.
1,500
5651
5653
14 x 2"
3/8" HWH
5/8”
AB
26-18 ga.
1,000
5661
5663
14 x 2-1/2"
3/8" HWH
5/8”
AB
26-18 ga.
1,000
- Panel over insulation to
wood structure.
Trugrip® GT Metal-To-Wood-Applications
PERFORMANCE TABLES
Sheet Steel Gauges
GAUGE NO.
18
20
22
24
26
28
30
.048
.036
.030
.024
.018
.015
.012
Pullout Values
FASTENER
STEEL GAUGE (lbs.)
DIA.
PT
26
24
22
20
18
#9
AB
171
252
329
401
634
#12
AB
199
271
360
426
656
#14
AB
-----
-----
-----
-----
-----
Pullout Values
FASTENER
SPF 2 X 4 WOOD (EMBEDMENT
DIA.
PT
1/2”
3/4”
1”
1-1/4”
1-1/2”
#9
AB
198
328
571
728
872
#12
AB
210
355
-----
-----
-----
#14
AB
252
416
637
942
1129
Pullout Values
FASTENER
PLYWOOD
OSB
DIA.
PT
3/8”
1/2”
5/8”
1/2”
3/4”
#9
AB
299
374
406
201
278
#12
AB
-----
-----
-----
-----
-----
#14
AB
301
472
462
-----
-----
Pullover Values
FASTENER
STEEL GAUGE
DIA.
PT
26
24
22
20
18
#9
AB
515
674
875
1100
1627
#12
AB
587
744
915
993
1246
#14
AB
660
916
1211
1417
2185
Fastener Values
FASTENER
(dia-tpi)
PT
TENSILE
(lbs. min)
SHEAR
(avg. lbs. ult.)
TORQUE
(min. in. lbs.)
9-15
AB
1800
1200
50
12-14
AB
2778
2000
92
B 37
DESCRIPTION/SUGGESTED SPECIFICATIONS
DEKSTRIP™
Expandable
Edged Flashing
Stretches to
Any Shape,
Seals and Stays
Pipe Flashing Applications—
Dek-Strip® is a flexible neoprene product that is completely chemical resistant. It has an aluminum bar
imbedded in it to form & follow the various corrugations of your roof.
ADVANTAGES
Wraps around almost any profile
Serpentine edges stretch up to 25% for
added length
Paintable after installation
TPE has a continuous service temperature
range of -50˚C to +115˚C
Great for large round pipes
Handles vibration & expansion
20 year warranty
DEKSTRIP
B 38
DEKSTRIP™ Expandable Edged Flashing
APPLICATIONS
Large square & round ducts & penetrations
BASIC
Chimneys
Skylights
Parapet Flashing
Expansion Joints
Stepped Roof
Dissimilar roof profiles
Transition wall
1. Snap a chalk line to provide a guide for applying sealant.
Gambrel roof
Flash between dissimilar materials
2. Apply a continuous bead of sealant along chalk line.
SPECIFICATIONS
Material
Grey TPE
3. Position top edge of Dekstrip over seal bead and install
Buildex fasteners at 1-1/2” maximum intervals on top edge.
Repeat steps 1, 2, and 3 for the bottom edge.
Base Kit Contents
Dekstrip material
1” x 4’ Aluminum termination strip
3” x 2’ Splice tape
4. Apply additional sealant to both fastened edges for
maximum weather-tight sealing.
B 39
DEKSTRIP™ Expandable Edged Flashing
SPLICING
DETAILED INSTRUCTIONS
1. Cut splice tape (supplied in Dekstrip carton) to the width
MATERIALS NEEDED:
Leather Gloves
Heat Gun
needed and remove clear film from one side of the tape.
Lining up the edges, press the tape firmly onto the
Dekstrip to remove air pockets.
3” x 2’ splice tape
Shears or scissors
2. Remove remaining film from tape. Apply second piece
of Dekstrip over tape and press firmly.
3. Apply heat over spliced area for 1-2 minutes while
applying firm pressure over entire spliced area to
ensure adhesion.
1. Apply splice tape to Dekstrip. 2. Position second Dekstrip
over tape & press in place.
3. Apply heat and press firmly
4. Turn material over and repeat step 3.
to seal edges.
JOINING ENDS AROUND ROUND PIPES
DETAILED INSTRUCTIONS
1. Cut splice tape to length, remove film from one side and
apply to Dekstrip.
2. Remove film from top of splice tape.
3. Overlap top piece of Dekstrip and press onto tape.
4. Fold termination strip in half, cut to wideth, and slide over
spliced area.and apply to Dekstrip.
1
2
5. Fasten through top of termination strip, Dekstrip, and back
3
of strip with Scots fasteners or rivets.
6. Apply sealant to all seams.
4
5
6
SELECTION CHART
DEKSTRIP Expandable Edged Flashing
B 40
PART NUMBER
REFERENCE NUMBER
DESCRIPTION
WEIGHT
FASTENERS NEEDED
(1-1/2” O.C.)
DSFBN
DSFBN
9-3/4" x 10'
8 lbs.
-
4157910
4157910
7" x 75'
26 lbs.
1200
4155910
4155910
9" x 75'
31 lbs.
1200
4156910
4156910
12" x 75'
38 lbs.
1200
4171910
4171910
18" x 50'
30 lbs.
800
4178910
4178910
3” x 2’ Splice
DESCRIPTION/SUGGESTED SPECIFICATIONS
Dektite and
Pipe Flashing Applications—
Dektite Will not crack or break. Dekite can be installed over or between the ribs of standard panels. Generally
no sealant is required where the Dektite collar provides a compression fit around the pipe.
Retrofit Dektite
The original flexible
pipe flashing
system with a 20
year warranty.
Retrofit Dektite
Standard Dektite
Retrofit Dektite makes difficult installations a breeze! Wraps
around existing or difficult to access pipes. Snaps together in
seconds. The built-in crimp means no loose clips or rivets. Grips
tight and stays tight. The supple aluminum base conforms to
metal profiles.
ADVANTAGES
Made of long life, flexible, weatherproof
gray EPDM rubber or red silicone.
One piece construction is easy to install.
EPDM has a continuous service temperature
range of -53˚C to +121˚C.
Flexible, corrosion resistant aluminum
base conforms to any panel configuration.
Silicone has a continuous service temperature
range of -40˚C to +176˚C
EPDM and silicone will not crack or break.
Pipe diameter markings are clearly indicated
for accurate fitting.
Proven resistance to ozone and ultra-violet light.
Thickness of the cone, particularly at stress
points, considerably impacts on the life span
of the flashing. Dektite is up to 66% thinker in
Pleated cone adjusts to any roof pitch and allows
some areas over the competition.
for complete flexibility.
Designed for 1/4’’ to 18’’ diameter pipes.
Standard Dektite
Step Design vs Dektite®
No size markings on step design.
Dektite underside rib height is 54% lower
than step design, resulting in better drainage.
-35.1%
-50.76%
Step design has exposed corner angles that
become vunerable to degradation when stretched.
Step produt is 50.76WT% thinner compound in
critical areas.
2.90
3.92
2.60
3.92
2.90
2.90
5.30
3.44
-54%
Aluminium thickness.
M/flash = 1.50
D/tite = 1.00
Retrofit Dektite
Aluminium width
M/flash = 28mm
D/tite = 23.4mm
–PHYSICAL PROPERTIES–
Product Comparison
Dektite with Silicone
Needs loose clips to join ends.
Needs band to seal pipe.
Needs sealant applied to base, seam &
pipe seam join.
-24.8% - 131.8%
-23.4%
-.28%
Other
Retrofit
-12.5%
Fully integrated waterproof seam joint
Seals by strong compound & good design
Only needs a sealant on roof and top of seam
3.30mm
2.57mm
7.65mm - 4.12mm
3.171mm
2.47mm
2.54mm
3.53mm
3.97mm
Aluminium thickness.
Other R’fit = 0.9mm
Dektite
= 1.0mm
Dektite®
Retrofit
Dektite with wires
– P R O D U C T C O M PA R I S O N –
B 41
Dektite and Retrofit Dektite
APPLICATIONS
Plumbing
Heating
Dektite
1.
2.
4.
5.
3.
Air Conditioning
Electrical and Exhaust Vents
1. Cut Dektite at appropriate pipe diameter marking.
2. Slide Dektite flashing down over pipe.
3. Apply sealant on underside of flexible aluminum base.
4. Press Dektite base into contours of panel configuration.
5. Fasten Dektite to surface with Buildex Scots self-drilling fasteners.
Apply additional sealant around base if desired.
Notes:
• Dekite can be installed over or between the ribs of standard panels.
• Can be installed between the rib sections of a Standing Seam Roofs or Architectural Panel.
Do Not install over the rib section of the SSR or Architectural Panel ribs.
• Generally no sealant is required where the Dektite collar provides a compression fit around
the pipe. However, some metal pipes and flues include a seam which may require a local
application of sealant at the point where the Dektite colla crosses the seam.
Retrofit Dektite
1.
2.
3.
4.
6.
5.
SPECIFICATIONS
Pipe Diameter Ranges
1/4’’ to 18’’ - Dektite
3/4’’ to 10’’ - Retrofit Dektite
1/4’’ to 18’’ - Silicone
Materials
1. Begin cutting opposite of the mechanical locking joiner. Cut through the
joiner with tin snips.
2. Wrap Retrofit Dektite around the pipe. Engage the top section of the
joiner first, then proceed down until joiner is completely engaged.
EPDM - Standard and Retrofit
3. Crimp joiner tightly, starting at the top by squeezing joiner “fingers”
Silicone - High Temperature
4. Apply sealant to the underside of the ribbed aluminum base. Press
with pliers.
Retrofit Dektite against contours of the panel configuration.
Recommended Sealant: Chemseco Sikaflex® sealant, part number 4040910.
5. Attach Retrofit Dektite to the panel with SCOTS self-drilling screws.
®
Screws should be spaced as necessary to avoid gaps between the base
and the panel.
6. Apply additional sealant around the top of the Dektite, near the
mechanical locking joiner seam.
B 42
Dektite and Retrofit Dektite
SELECTION CHART
Dektite Flashing
PART
NUMBER
REFERENCE
NUMBER
DESCRIPTION
PIPE
OUTSIDE
DIAMETER
DEKTITE
BASE
DIAMETER
DEKTITE
HEIGHT
BOX
QTY
4001910
4001910
Mini EPDM
1/4" - 1-1/8"
3-1/2"
1-3/4"
20
8001
4003910
#1 EPDM
1/4" - 2"
4-3/4"
3"
10
8002
4004910
#2 EPDM
1-3/4" - 3-1/4"
6-1/4"
4"
10
8003
4009910
#3 EPDM
1/4" - 4"
7-3/4"
4"
10
8004
4011910
#4 EPDM
3" - 6"
9-1/4"
5"
10
8005
4016910
#5 EPDM
4" - 7"
10-3/4"
5"
5
8006
4018910
#6 EPDM
5" - 9"
12-1/2"
6"
5
8007
4020910
#7 EPDM
6" - 11"
14-1/2"
6"
5
8008
4025910
#8 EPDM
7" - 13"
16-1/2"
6"
5
8009
4028910
#9 EPDM
10" - 18"
25-3/8"
8"
2
4035910
4035910
#3 Silicone
1/4" - 4"
7-3/4"
4"
10
4036910
4036910
#5 Silicone
4" - 7"
10-3/4"
5"
5
4038910
4038910
#8 Silicone
7" - 13"
16-1/2"
6"
5
4039910
4039910
#9 Silicone
10" - 18"
25-3/8"
8"
2
Note: When used on roofs where pitch is steeper than 20 degrees, or when used on deep ribbed profile roof panel (1-1/2’’ deep corrugation or more), consider using next
larger size Dektite that will accommodate the same pipe diameter. Flexible, Polyurethane-based elastomeric Sealant. Recommended Fastener: 1/4-14 x 7/8’’
Scots® Teks®/1, part number 1387209.
Retrofit Dektite
PART
NUMBER
REFERENCE
NUMBER
DEKTITE
SIZE NUMBER
PIPE
OUTSIDE
DIAMETER
DEKTITE
BASE
DIAMETER
DEKTITE
HEIGHT
BOX
QTY
8011
4029910
801 EPDM
3/4" - 2-3/4"
6-3/10"
3-1/2"
10
8012
4030910
802 EPDM
2" - 7-1/4"
10-3/4"
5-3/5"
5
8013
4031910
803 EPDM
3-1/4" - 10"
14-1/2"
5-4/5"
5
PERFORMANCE TABLE
Dektite Flashing
ASTM
METHOD
TEST DESCRIPTION
SPECIFICATION
TEST
RESULTS
ASTM
METHOD
1450 psi min.
1537 psi
D2137
350 min.
535
Low Temperature Brittleness3 mins. at -40°C
100 (no cracks)
Passed
D624
Tear Resistance Die C (min.)
per inch of width min.
U.L. 94
Flame Resistance
D412
Tensile Strength (min. psi rating)
D412
Ultimate Elongation (%)
D1171
Resistance to Ozone-min. rating
D673
Heat Aging - 70 hrs. at 100˚C
• Change in Hardness (points)
± 15 max.
+8
• Change in Tensile Strength (%)
± 30 max.
-4.7
• Change in Elongation (%)
± 50 max.
-26
TEST DESCRIPTION
SPECIFICATION
TEST
RESULTS
Non-brittle
Passed
125 pounds per inch
of width
130 pounds
U.S. 94 H.B.
Passed
B 43
DEK-CAP™
Flashing
The Only Universal
End Cap Flashing
For Standing
Seam Roof
Metal Roof End Cap Flashing Application—
Universal design allows use on left and right
handed seams.
Flexible, corrosion resistant aluminum base
conforms to the majority of standing seam
roof panels.
Thermal elastomer material provides excellent
resistance to ozone, ultra-violet light and
extreme temperatures.
Thermal elastomer has a continuous temperature
of -40˚C to 121˚C.
Pre-formed panel profile shape is designed to
reduce installation time.
Expansion notch provides added installation
flexibility.
Fastening locations are clearly indicated for
accurate installation.
Interior panel stop ensures correct installation
position.
Dual underside ridges provide maximum
sealing protection.
Different Applications
RIDGE CAP
ROOF CURB
RIDGE VENT
WALL TO ROOF
B 44
RETROFIT
DEK-CAP™ Standing Seam Roof End Cap Flashing
APPLICATIONS
Ridge Cap
Roof Curb
Ridge Vent
Wall to Roof
Retrofit
SPECIFICATIONS
Material
Thermal Elastomer
Width
7-1/4"
Length
5-3/4"
Height
3-5/16"
Color
Gray
1. Bend top so that both sides are parallel to metal roof.
2. Press Dek-Cap edges into contours of panel configuration.
3. Remove and apply sealant on underside of flexible aluminum edging.
4. Slide Dek-Cap flashing over panel profile.
5. Follow indicated fastening pattern to attach Dek-Cap to surface with
SELECTION CHART
Dek-Cap Flashing
PART
NUMBER
REFERENCE
NUMBER
DESCRIPTION
APPLICATION
BOX QTY
4146910
4146910
Dek-Cap
Metal Curbs, Skylights, Ridge
Applications, Jobsite Retrofit
10
Buildex Scots self-drilling fasteners.
6. Apply additional sealant around base if desired.
PERFORMANCE TABLE
Dek-Cap Flashing
ASTM
METHOD
TEST DESCRIPTION
SPECIFICATION
TEST
RESULTS
ASTM
METHOD
1450 psi min.
1500 psi
D2137
350 min.
450
Low Temperature Brittleness3 mins. at -40°C
100 (no cracks)
Passed
D624
Tear Resistance Die C (min.)
per inch of width min.
D412
Tensile Strength (min. psi rating)
D412
Ultimate Elongation (%)
D1171
Resistance to Ozone-min. rating
D573
Heat Aging - 70 hrs. at 100˚C
• Change in Hardness (points)
± 15 max.
+3
• Change in Tensile Strength (%)
± 30 max.
+2
• Change in Elongation (%)
± 50 max.
-3
TEST DESCRIPTION
SPECIFICATION
TEST
RESULTS
Non-brittle
Passed
125 pounds per inch
of width
Passed
B 45
TAPCON
®
Light-To-Medium Duty Masonry Applications—
The “original masonry” anchor that cuts its own threads into concrete, brick,
or block. Maximum performance is achieved because the Tapcon Anchor, the
Condrive Installation Tool, and the carbide-tipped Tapcon Drill Bits are designed
to work as a system. It is essential to use the Condrive tool and the correct drill
bit to assure consistent anchor performance.
Concrete and
Masonry Anchors
ADVANTAGES
Fast installation ... drill a hole ... drive an anchor.
Packaged with one Tapcon “close tolerance”
masonry drill bit per 100 anchors. Also
available in bulk packaging.
Available in 3/16’’ diameter up to 4’’ in length
and 1/4’’ diameter up to 6’’ in length.
Replaces small diameter expansion anchors, plugs
and screws in light to medium duty applications.
No need to pre-spot holes ... and no inserts are
required.
Reversible and removable ... can be installed
close to an edge.
Compatible for use in ACQ treated wood.
Tapcon Anchors
Hex Head style on Tapcon Anchors is available
for majority of fixture anchoring needs
Climaseal™ Coating is standard on all Tapcon
anchors to provide extended corrosion resistance
Now available in 410 Stainless Steel
Phillips Flat Head style is available when flush
seating is necessary in countersink applications
Advanced Threadform cuts into masonry
materials for greater pullout values
Lengths of Tapcon Anchors range from 1-1/4”
to 4” in 3/16” and up to 6” in 1/4” diameters.
Nail-Type Point guides the anchor into
the pre-drilled hole. Excellent for wood to
concrete applications
SPECIFICATIONS
Diameter
3/16” and 1/4”
Thread Form Advanced Threadform
Technology®
B 46
Head Style
Flat and Hex Head
Point Type
Nail
Finish
Blue Climaseal®
Tapcon Concrete and Masonry Anchors
APPROVALS/LISTINGS
APPLICATIONS
Electrical junction boxes and conduit clips to
masonry.
Miami Dade County Product Control Approved
Wood headers and furring strips to masonry
RR25644
ICC-ES ESR-1671 City of Los Angeles
HVAC strapping to masonry.
Plywood backer boards to masonry.
Exterior insulation systems to masonry.
INSTALLATION STEPS
Read instructions before using (installation)!
If there are any questions concerning proper
installation, applications or appropriate use of
WARNING: this product, please call our Technical Services
Department at 1-800-899-7890. Failure to
follow these instructions can result in serious
personal injury.
1. Select proper fastener – diameter / head style / length
a) Use selection chart to choose proper length.
2. Drill Hole – use selection chart to determine drill bit
length and depth of hole
a) Choose appropriate drill bit based upon diameter
of Tapcon Anchor.
b) Drill hole minimum ¼” deeper than Tapcon Anchor
to be embedded.
Minimum anchor embedment: 1”
Maximum anchor embedment: 1-3/4”
INSTALLATION TOOL GUIDELINES
Condrive 500® - Compact high speed installation tool designed for installation of Tapcon hex head
and Phillips flat head anchors up to 3-3/4’’ long.
GUIDELINES:
STEP 1: Place drill adapter into 3/8’’ or 1/2’’ chuck of standard hammer drill. Place drill bit in drill adapter
and tighten set screw. Drill hole a minimum of 1/4’’ deeper than Tapcon anchor is to be embedded.
STEP 2: Phillips Heads may be installed using either side of sleeve. To install a 1/4 diameter Hex Washer
Head apcon, use large opening side of sleeve (see sleeve label). To install a 3/16 diameter Hex Washer
Head Tapcon, use small opening side of sleeve (see sleeve label). Slide opposite side of sleeve over drill
bit and snap onto drill bit adapter. NOTE: If driving Hex Washer Head Tapcon, driver will automatically
disengage. If driving Phillips Head Tapcon, care must be taken to ensure anchor is not overdriven.
STEP 3: Loosen set screw on side of drill adapter with 1/8’’ Hex Key. Do not remove completely. Replace
old drill bit with new one. Align flat side with set screw and tighten screw. Do not overtighten.
3. Drive Anchor
Failure to wear safety glasses with side
WARNING: shields can result in serious personal injury.
Always wear ANSI compliant eye protection
(ANSI Z87.1-2003).
WARNING:
Using the wrong size drill bit will affect
performance values and may cause failure.
HEAD STYLES
Condrive 1000® - A multi-purpose tool designed for installation of Tapcon hex head and Phillips flat
head anchors up to 3-3/4’’ long.
GUIDELINES:
STEP 1: Place correct drill bit into driver adapter and drill hole 1/4” deeper than depth of embedment.
STEP 2: Slide Condrive Installation Tool sleeve over drill bit. Snap hex head or Phillips Socket in place.
3/16” diameter has a 1/4” slotted hex washer head (HWH)
STEP 3: Insert anchor in socket, position fixture to be fastened, begin to drive Tapcon into pre-drilled hole.
STEP 4: The anchor is fully set when the nosepiece of the Condrive Tool automatically disengages from
the socket and fixture is secured in place.
Buildex Condrive Tools are designed to specifically install Tapcon Anchors and to fit standard hammer drills.
3/16” diameter uses a #2 phillips flat head (PFH)
B 47
SELECTION CHART
Tapcon Anchors
3/16" Diameter
PART NUMBER
1/4” HWH
PART NUMBER
#2 PFH
DESCRIPTION
FIXTURE
THICKNESS
STRAIGHT SHANK
DRILL BIT
PART NUMBER
DRILL BIT
DESCRIPTION
BOX
QTY
CASE
QTY
BULK
QTY
3010 BK
3110 BK
3/16" x 1-1/4"
0 - 1/4"
7200
5/32" x 3-1/2"
100
1000
3,000
3020
BK
3120
BK
3/16" x 1-3/4"
0 - 3/4"
7200
5/32" x 3-1/2"
100
1000
3,000
3030
BK
3130
BK
3/16" x 2-1/4"
1/2" - 1-1/4"
7210
5/32" x 4-1/2"
100
1000
2,000
3040
BK
3140
BK
3/16" x 2-3/4"
1" - 1-3/4"
7210
5/32" x 4-1/2"
100
1000
1,500
3060
BK
3160
BK
3/16" x 3-1/4"
1-1/2" - 2-1/4"
7220
5/32" x 5-1/2"
100
1000
1,000
3080
BK
3180
BK
3/16" x 4"
2-1/4" - 3"
7220
5/32" x 5-1/2"
100
500
1,000
Tapcon Anchors must be installed using all Buildex system components (Tapcon Anchors, Condrive Tools and Tapcon Drill Bits) in order to qualify for
ITW Buildex system support.
BK
Available in Bulk Pack Qty
Tapcon Anchors
1/4" Diameter
PART NUMBER
5/16” HWH
PART NUMBER
#3 PFH
DESCRIPTION
FIXTURE
THICKNESS
STRAIGHT SHANK
DRILL BIT
PART NUMBER
DRILL BIT
DESCRIPTION
BOX
QTY
CASE
QTY
BULK
QTY
3210 BK
3310 BK
1/4" x 1-1/4"
0 - 1/4"
7230
3/16" x 3-1/2"
100
1000
3,000
3220 BK
3320 BK
1/4" x 1-3/4"
0 - 3/4"
7230
3/16" x 3-1/2"
100
1000
2,000
3230 BK
3330 BK
1/4" x 2-1/4"
1/2" - 1-1/4"
7240
3/16" x 4-1/2"
100
1000
1,000
3240
BK
3340
BK
1/4" x 2-3/4"
1" - 1-3/4"
7240
3/16" x 4-1/2"
100
1000
1,000
3250
BK
3350
BK
1/4" x 3-1/4"
1-1/2" - 2-1/4"
7250
3/16" x 5-1/2"
100
1000
750
3270
BK
3370
BK
1/4" x 4"
2-1/4" - 3"
7250
3/16" x 5-1/2"
100
500
750
3280
BK
3380
BK
1/4" x 5"
3-1/4" - 4"
7260
3/16" x 6-1/2"
100
500
500
3290
BK
3390
BK
1/4" x 6"
4-1/4" - 5"
7270
3/16" x 7-1/2"
100
100
250
Tapcon Anchors must be installed using all Buildex system components (Tapcon Anchors, Condrive Tools and Tapcon Drill Bits) in order to qualify for
ITW Buildex system support.
BK
Accessories
PART
NUMBER
DESCRIPTION
7230S
3/16" x 5" SDS Bit
7005
Condrive 500 Installation Kit
7000
B 48
PERFORMANCE TABLES
Tension Values
(in Normal-weight Concrete lbs.)
ANCHOR
DIAMETER
CONCRETE STRENGTH
EMBEDMENT DEPTH
3/16
1/4
2000 PSI
4000 PSI
5000 PSI
1”
600
650
800
1-1/2”
1090
1090
1220
1-3/4
1450
1460
1730
1”
750
800
950
1-1/2”
1380
1820
2170
1-3/4”
2020
2380
2770
Tension and Shear Values
(in CMU 1” Embedment)
TENSION (lbs.)
SHEAR (lbs.)
ANCHOR
DIAMETER
LIGHT WEIGHT
MEDIUM WEIGHT
LIGHT WEIGHT
MEDIUM WEIGHT
3/16
220
340
400
730
1/4
250
500
620
1000
For minimum edge distance and spacing distance, please refer to the ICC-ES report or Miami-Dade report for this product. Lightweight and medium-weight
Concrete Masonry Units (CMU) were defined by ASTM C 90.
Shear Values
(in Normal-weight Concrete lbs.)
ANCHOR
DIAMETER
3/16
1/4
EMBEDMENT DEPTH
CONCRETE STRENGTH
2000 PSI
4000 PSI
5000 PSI
1”
720
720
860
1-1/2”
860
860
860
1-3/4
870
990
990
1”
900
1360
1440
1-1/2”
1200
1380
1670
1-3/4”
1670
1670
1670
NOTE: Indicated tension and shear failure values were obtained in tests conducted at CEL Consulting. Designated holding power depends on the quality of the masonry material, depth of embedment and proper
hole size. These figures are offered only as a guide and are not guaranteed in any way by Illinois Tool Works Inc. The figures indicate average ultimate tension and shear failure values. A safety factor of 4:1 or 25%
of ultimate value is generally accepted as a safe working load. However, reference should always be made to applicable codes for the specific safe working ratio. All values are based on close tolerance holes drilled with
Buildex Tapcon® carbide drill bits. Performance of the Tapcon anchor may vary in extremely hard concrete aggregates. Consult your Buildex representative for further information.
As in the case with all applications, Buildex can only suggest typical fasteners for typical applications and that the connection design is the sole responsibility of the Building Design Engineer, Architect or otherwise
responsible person charged with the design of the connection. For further product information, please contact the nearest Authorized Buildex Distributor or the Buildex Technical Service Department at 1-800-323-0720.
B 49
Tapcon 410 SS Masonry Anchors—
TAPCON
®
Premium masonry anchor that provides the corrosion protection of 410 Stainless Steel
and the performance of our original carbon Tapcon.
Masonry Anchors
ADVANTAGES
410 Stainless Steel for added corrosion
protection.
Fast installation ... drill a hole ... drive an anchor.
Cuts threads into concrete, brick and hollow
block.
Available in 3/16’’ diameter up to 21-/4’’ in
length and 1/4’’ diameter up to 3-1/4’’ in
length.
Reversible and removable ... can be installed
close to an edge.
SPECIFICATIONS
Diameter / 3/16" & 1/4"
Thread Form Original Notched Hi-Lo®
Head Style
Hex Washer Head
(HWH)
Point Type
Finish
Philips Flat Head
(PFH)
Nail
Type
Salt Spray Results
(ASTM B117)
ClimaShield™
1600 hours - NO RED DUST!
Accessories
B 50
PART
NUMBER
DESCRIPTION
7230S
3/16" x 5" SDS Bit
7005
7000
Tapcon 410 Stainless Steel Masonry Anchors
APPLICATIONS
APPROVALS/LISTINGS
Brick ties
Miami Dade County Product Control Approved
Exterior attachment to concrete requiring extra corrosion resistance.
Florida Building Code
INSTALLATION TOOL GUIDELINES
INSTALLATION STEPS
Condrive 500® - Compact high speed installation tool designed for installation of Tapcon hex head
and Phillips flat head anchors up to 3-3/4’’ long.
Read instructions before using (installation)!
GUIDELINES:
STEP 1: Place drill adapter into 3/8’’ or 1/2’’ chuck of standard hammer drill. Place drill bit in drill adapter
and tighten set screw. Drill hole a minimum of 1/4’’ deeper than Tapcon anchor is to be embedded.
STEP 2: Phillips Heads may be installed using either side of sleeve. To install a 1/4 diameter Hex Washer
Head apcon, use large opening side of sleeve (see sleeve label). To install a 3/16 diameter Hex Washer
Head Tapcon, use small opening side of sleeve (see sleeve label). Slide opposite side of sleeve over drill
bit and snap onto drill bit adapter. NOTE: If driving Hex Washer Head Tapcon, driver will automatically
disengage. If driving Phillips Head Tapcon, care must be taken to ensure anchor is not overdriven.
STEP 3: Loosen set screw on side of drill adapter with 1/8’’ Hex Key. Do not remove completely. Replace
old drill bit with new one. Align flat side with set screw and tighten screw. Do not overtighten.
Condrive 1000® - A multi-purpose tool designed for installation of Tapcon hex head and Phillips flat
head anchors up to 3-3/4’’ long.
GUIDELINES:
STEP 1: Place correct drill bit into driver adapter and drill hole 1/4” deeper than depth of embedment.
STEP 2: Slide Condrive Installation Tool sleeve over drill bit. Snap hex head or Phillips Socket in place.
STEP 3: Insert anchor in socket, position fixture to be fastened, begin to drive Tapcon into pre-drilled hole.
STEP 4: The anchor is fully set when the nosepiece of the Condrive Tool automatically disengages from
the socket and fixture is secured in place.
Buildex Condrive Tools are designed to specifically install Tapcon Anchors and to fit standard hammer drills.
If there are any questions concerning proper
installation, applications or appropriate use of
WARNING: this product, please call our Technical Services
Department at 1-800-899-7890. Failure to
follow these instructions can result in serious
personal injury.
1. Select proper fastener – diameter / head style / length
a) Use selection chart to choose proper length.
2. Drill Hole – use selection chart to determine drill bit
length and depth of hole
a) Choose appropriate drill bit based upon diameter
of Tapcon Anchor.
b) Drill hole minimum ¼” deeper than Tapcon Anchor
to be embedded.
Minimum anchor embedment: 1”
Maximum anchor embedment: 1-3/4”
3. Drive Anchor
Failure to wear safety glasses with side
WARNING: shields can result in serious personal injury.
Always wear ANSI compliant eye protection
(ANSI Z87.1-2003).
WARNING:
Using the wrong size drill bit will affect
performance values and may cause failure.
HEAD STYLES
B 51
Tapcon 410 Stainless Steel Masonry Anchors
SELECTION CHART
Tapcon Anchors
PART NUMBER
#2 PFH
DESCRIPTION
FIXTURE
THICKNESS
STRAIGHT SHANK
DRILL BIT
PART NUMBER
DRILL BIT
DESCRIPTION
BOX
QTY
CASE
QTY
3418907
3/16" x 1-3/4"
1/4" - 3/4"
3095910
5/32" x 3-1/2"
100
1000
3419907
3/16" x 2-1/4"
3/4" - 1-1/4"
3096910
5/32" x 4-1/2"
100
1000
Tapcon Anchors must be installed using all Buildex system components (Tapcon Anchors, Condrive Tools and Tapcon Drill Bits) in order to qualify for ITW Buildex
system support.
Tapcon Anchors
1/4" Diameter
PART NUMBER
5/16” HWH
PART NUMBER
#3 PFH
DESCRIPTION
FIXTURE
THICKNESS
STRAIGHT SHANK
DRILL BIT
PART NUMBER
DRILL BIT
DESCRIPTION
BOX
QTY
CASE
QTY
3367907
3373907
1/4" x 1-1/4"
0 - 1/4"
3098910
3/16" x 3-1/2"
100
1000
3368907
3374907
1/4" x 1-3/4"
1/4" - 3/4"
3098910
3/16" x 3-1/2"
100
1000
3369907
3375907
1/4" x 2-1/4"
3/4" - 1-1/4"
3099910
3/16" x 4-1/2"
100
1000
3370907
3376907
1/4" x 2-3/4"
1-1/4" - 1-3/4"
3099910
3/16" x 4-1/2"
100
1000
3371907
3377907
1/4" x 3-1/4"
1-3/4" - 2-1/4"
3100910
3/16" x 5-1/2"
100
1000
Tapcon Anchors must be installed using all Buildex system components (Tapcon Anchors, Condrive Tools and Tapcon Drill Bits) in order to qualify for ITW Buildex
system support.
PERFORMANCE TABLES
Pullout Values
Pullout Values
(in Concrete lbs. 3000 PSI, cured 40 days)
(in Hollow Block)
ANCHOR
DIAMETER
1"
EMBEDMENT DEPTH IN SOLID MATERIAL
1-1/4"
1-1/2"
1-3/4"
ANCHOR
DIAMETER
EMBEDMENT DEPTH IN SOLID MATERIALS
1"
3/16
964
1080
1360
1595
3/16
540
1/4
1381
1616
2041
2332
1/4
754
1-1/4"
Shear Values
ANCHOR DIAMETER
EMBEDMENT DEPTH
3145 PSI HARD ROCK CONCRETE
3/16
1-1/4"
1460
LIGHTWEIGHT HOLLOW BLOCK
1096
1/4
1-1/4"
1622
1218
NOTE: Indicated tension and shear failure values were obtained in tests conducted at CEL Consulting. Designated holding power depends on the quality of the masonry material, depth of embedment and proper
hole size. These figures are offered only as a guide and are not guaranteed in any way by Illinois Tool Works Inc. The figures indicate average ultimate tension and shear failure values. A safety factor of 4:1 or 25%
of ultimate value is generally accepted as a safe working load. However, reference should always be made to applicable codes for the specific safe working ratio. All values are based on close tolerance holes drilled with
Buildex Tapcon® carbide drill bits. Performance of the Tapcon anchor may vary in extremely hard concrete aggregates. Consult your Buildex representative for further information.
As in the case with all applications, Buildex can only suggest typical fasteners for typical applications and that the connection design is the sole responsibility of the Building Design Engineer, Architect or otherwise
responsible person charged with the design of the connection. For further product information, please contact the nearest Authorized Buildex Distributor or the Buildex Technical Service Department at 1-800-323-0720.
B 52
DESCRIPTION/SUGGESTED SPECIFICAITONS
E-Z
Drywall Anchor Applications—
The E-Z Ancor is a one-piece self-drilling anchor designed for optimal holding
E-Z Ancor
Self-Drilling performance in gypsum wallboard. Available in zinc or high strength engineered
Anchor
plastic (non-conductive). Ideal anchor for 3/8", 1/2" and 5/8" gypsum wallboard.
Drywall Anchors
The Original!
Fast and Easy
Self-Drilling
Anchors
ADVANTAGES
No hole preparation necessary; pre-drills own
small precise hole in gypsum wallboard.
Full range of anchors to cover all wall fastening
applications.
Replaces plastic plugs and toggles.
Available in corrosion resistant, non-conductive
white nylon.
Deep thread design provides strong engagement
in 3/8" 1/2" and 5/8" gypsum wallboard.
Installs quickly and easily with a phillips
screw-driver or square drive bit.
Can be easily backed-out.
Low profile head.
Single point designs for clean cutting installation.
E-Z Ancors
E-Z
Mini
Mini
Twist-N-Lock
E-Z
Ancor
E-Z
Twist-N-Lock
E-Z
Toggle
B 53
E-Z Drywall Anchors
APPLICATIONS
Electrical Fixtures
Plaques and Awards
Smoke Detectors
Thermostats
Closet Organizers
Clocks
HVAC Fixtures
Coat Racks
Kitchen Accessories
Plumbing Fixtures
Curtain Rods
Doorbells
Bathroom Accessories
Signs
Shelving and Supports
Bulletin Boards
Telecommunications
Equipment
Mirrors
Control Systems
Chalk Boards
Picture Frames
Decorative Wall Hangings
Remote Control Boxes
Brackets
Office Material Holders
LIGHT DUTY & MEDIUM DUTY E-Z ANCORS
1. Place #2 Phillips screwdriver into recess of
E-Z Zinc, E-Z Lite, E-Z Mini, E-Z Stud Solver,
Twist-N-Lock, or E- Z Plastic Plus.
2. Press into drywall while turning the anchor
clockwise until it is seated flush with wall.
3. Place fixture in position over installed E-Z Zinc,
E-Z Lite, E-Z Mini , E-Z Stud Solver, Twist-N-Lock,
or Plastic Plus. Insert screw with screw driver.
Tighten fixture in place.
SPECIFICATIONS
HEAVY DUTY E-Z TOGGLE
Material
Zinc die cast, Carbon, Steel, Nylon
Drilling Capacity
3/8", 1/2" and 5/8" gypsum wallboard
1. Using a #2 Phillips screwdriver, drill the
E-Z Toggle Anchor into drywall until the head
of the anchor is seated flush.
2. To “set” the clamp behind the drywall, place
the mounting scrw into the anchor and push
or tap firmly until approximately 1” of screw is
protruding (do not rotate). Then remove
the screw.
PERFORMANCE TABLE
E-Z Ancors
3. Place fixture over E-Z Toggle, insert screw and
continue to turn until fastened tightly (for
example when attaching a 1/2” thick fixture,
it will require approx. 23 full rotations of the
screwdriver to fully tighten the fixture).
HOLDING WEIGHT (lbs.)
Gypsum Board Thickness
DRYWALL THICKNESS
3/8"
1/2"
5/8"
EZ Mini and Mini Twist-N-Lock
30
40
50
E-Z Anchor
40
50
75
Twist-N-Lock
65
75
80
E-Z Toggle
70
85
150
These performance values are averages obtained under laboratory conditions. Note that these values will change
depending on age, moisture content and surface treatment of the drywall (gypsum) material. Appropriate safety
factors should be applied to these values for design purposes.
SELECTION CHART
E-Z
Mini
E-Z Ancors
Mini
Twist-N-Lock
E-Z
Ancor
E-Z
Twist-N-Lock
E-Z
Toggle
PART NUMBER
WITH SCREWS
PART NUMBER
WITHOUT SCREWS
DESCRIPTION
MATERIAL
MAXIMUM FIXTURE
THICKNESS
ACCOMMODATES
SHEETS METAL SCREW SIZE
BOX QTY
6411L
6400L B
Mini Twist-N-Lock
Nylon
3/4"
#6
100
1000
10,000
6411M
6400M
E-Z Mini
Zinc
3/4"
#6, #7, #8
100
1000
3,000
6411
6400 B
E-Z Ancor
Zinc
3/4"
#6, #7, #8
100
1000
1,700
6411P
6400P
E-Z Twist N Lock
Nylon
3/4"
#8
100
1000
4,500
6401
-
E-Z Toggle
Zinc
1/2"
#8
100
1000
B
B 54
B
B
CASE QTY BULK QTY
Rock-On
Backer-On
Fasteners
Cement Board
and Fiber Cement
Backerboard
Fasteners
Cement Board Applications—
ROCK-ON
BACKER-ON
Rib design under head countersinks into dense
material while preventing stripouts.
Gimlet points starts easily - no predrilling.
Two point types for steel and wood applications.
Serrated thread design provides reduced
installation torque and superior holding power.
Larger head diameter increases board surface
contact for greater pullover resistance.
Rib design under head countersinks into dense
material while preventing stripouts.
Rock-On is recommended for ACQ treated wood.
#2 square drive prevents bit from slipping.
SPECIFICATIONS
ROCK-ON
Diameter
BACKER-ON
Diameter
#8; #9
#10
Thread Form 8-18; 9-15 Hi-Lo®
Thread Form 10-10 Serrated
Drill Point
#8 Type S-12®; #9 Type “S”
Drill Point
Gimlet
Head Style
Wafer Head with countersinking
ribs
Head Style
Wafer Head with countersinking
ribs
Finish
Climacoat®
Finish
Long life epoxy topcoat/zinc plating.
1. A standard screwgun with a depth sensitive nosepiece should be used to install cement board fasteners.
For optimal fastener performance, the screwgun should be a minimum of 6 amps and have an RPM
range of 0-2500.
3. Worn or damaged bit tips should be replaced.
5. Overdrivng may result in torsional failure of the fastener or stripout of the substrate.
APPLICATIONS
Cement-type boards or
any dense sheathings
to steel or wood studs.
Wire lath to steel or
wood studs.
Plywood to steel or
wood studs.
Hardie Fiber Cement
Backerboard
B 55
Rock-On, Backer-On Fasteners
SELECTION CHART
Hi-Lo Rock-On Fasteners
PART
NUMBER
REFERENCE
NUMBER
DESCRIPTION
HEAD
STYLE
MATERIAL ATTACHMENT RANGE
BOX QTY
APPLICATIONS
BX23202
2151500
9-15 x 1-1/4"
#2 PW
Up to 3/4" Material Thickness to Wood
3/8"-1" Material Thickness to Steel
600
- Cement Board to wood or light gauge steel
26-20 gauge
BX23135
2153500
9-15 x 1-5/8"
#2 PW
Up to 1-1/8" Material Thickness to Wood
3/8"-1-3/8" Material Thickness to Steel
150
S-12 Rock-On Fasteners
PART
NUMBER
P
REFERENCE
DESCRIPTION
NUMBER
HEAD
STYLE
CASE
QTY
“P”
PAK QTY
6310 P
2156500 P
8-18 x 1-1/4"
#2 PW
3/8"-3/4" Material Thickness to Steel
5,000
1,000
6330 P
2159500 P
8-18 x 1-5/8"
#2 PW
3/8"-1-1/4" Material Thickness to Steel
4,000
1,000
APPLICATIONS
- Cement Board to steel 20-12 gauge
Available in P PAK
Backer-On Fasteners
PART
NUMBER
REFERENCE
NUMBER
DESCRIPTION
HEAD
STYLE
BOX QTY
2406000
2406000
#10 x 1-1/4”
#2 SW
Up to 1/2” Backer Board to Wood
Up to 1” Backer Board to Steel
5,000
BX23206
BX23206
#10 x 1-1/4”
#2 SW
600
BX23137
BX23137
#10 x 1-1/4”
#2 SW
200
APPLICATIONS
- Backer Board to wood and steel
PERFORMANCE TABLES
Sheet Steel Gauges
GAUGE NO.
12
14
16
18
20
22
24
26
.105
.075
.060
.048
.036
.030
.024
.018
Pullout Values
FASTENER
STEEL GAUGE (lbs.)
26
24
22
20
18
16
14
12
S-12
120
191
239
285
470
663
910
1424
Hi-Lo
163
242
314
370
-----
-----
-----
-----
Backer-On
271
371
457
615
-----
-----
-----
-----
Wood Embedment
#2 SPF 2 x 4
1/2”
3/4”
1”
Hi-Lo
223
312
555
676
Backer-On
-----
436
780
-----
1-1/4”
The values listed are ultimate averages achieved under laboratory conditions and apply to Buildex manufactured fasteners only. Appropriate safety factors should be applied to these values for design purposes.
B 56
Grid-Mate
Mechanical
Fasteners
The Original
Mechanical
Fastening System
for Polymer
Modified (PM) and
Modified PB EIFS
Exterior Insulated Finish System Applications—
GRID-MATE
GRID-MATE PB
Low profile design seats flush.
Closure fingers keep coating out of contact with
fastener head - no sink marks or bleed throughs.
“Keying Windows” provides a strong bond with
all coatings.
Climacoat® and Climaseal® fasteners.
Available with stem for time saving pre-spotting
of the plate.
2” diameter resists and distributes wind loads for
a secure system.
Climacoat and Climaseal fasteners.
SPECIFICATIONS
GRID-MATE
Diameter
Material
GRID-MATE PB
1-3/4’’ Plate
1-3/4’’ Plate with stem
Diameter
2” Round
Material
White polypropylene
White polypropylene
Part No. 2189900
Part No. 2115900
Part No. 2117900
1. Use a 0-2500 RPM, 6 amp min. rated screwgun or cordless drill to install fasteners to wood and steel
substrates. Use a hammerdrill or rotary hammer to install Tapcon® masonry anchors.
2. Seat Grid-Mate PB washers flush with or maximum 1/16’’ below insulation surface. Overdriving may
damage the washer and insulation.
4. Replace worn or damaged bit tips to prevent damage to fastener head and its finish.
5. Consult EIFS system manufacturers specifications for appropriate fastener spacing.
B 57
Grid-Mate Mechanical Fasteners
APPLICATIONS
GRID-MATE
GRID-MATE PB
Modified Stucco Systems.
Attaching expanded polystyrene insulation
to all substrates for all Polymer Based (PB)
Exterior Insulated
Expanded lath over rigid insulation.
Fabric and wire mesh over rigid insulation.
Attaching dense blanket or rigid insulation
for parking garages, fireproofing, foundation
walls, and soundproofing.
Attaching rigid insulation to wood, steel,
masonry, or concrete.
SELECTION CHART
Grid-Mate and Grid-Mate PB Fasteners
PART NUMBER
DESCRIPTION
BOX QTY
2115900
Grid-Mate
1,000
2117900
Grid-Mate with Stem
1,000
Grid-Mate PB Washer
1,000
GRID-MATE WASHERS
GRID-MATE PB WASHERS
2189900
GRID-MATE FASTENERS HI-LO (WOOD/LIGHT METAL)
2311500
7 x 1-5/8"
5,000
2312500
8 x 2"
3500
2313500
8 x 2-1/2"
2500
2314500
8 x 3"
2000
2315500
8 x 4"
1000
2316500
10 x 5"
500
2317500
10 x 6"
1000
2321500
6 x 1-5/8"
5,000
2318500
6 x 2"
3500
2319500
8 x 2-5/8"
2500
2320500
8 x 3"
2000
2322500
10 x 4"
1000
2323500
10 x 5"
500
3120BK
3/16" x 1-3/4"
3000
3130BK
3/16" x 2-1/4"
2000
3140BK
3/16" x 2-3/4"
1500
3160BK
3/16" x 3-1/4"
1000
3180BK
3/16" x 4"
1000
For use with plywood, OSB, dimensional lumber and light gauge metal
(26 gauge - 20 gauge).
GRID-MATE FASTENERS S-12 (STEEL FRAMING)
For use with steel framing from 20 gauge - 12
GRID-MATE FASTENERS TAPCON (MASONRY)
B 58
For use with brick, block and concrete.
Grid-Mate Mechanical Fasteners
PERFORMANCE TABLES
Pullout Values
FASTENER
SHEET STEEL GAUGE (lbs.)
26
24
22
20
18
16
14
12
Wood/Light Metal (Hi-Lo)
129
178
244
277
-----
-----
-----
-----
Steel (S-12)
-----
-----
-----
296
471
679
847
1225
Pullout Values
WOOD APPLICATIONS
FASTENER
Wood/Light Metal (Hi-Lo)
PLYWOOD
OSB
LUMBER (EMBEDMENT)
1/2”
5/8”
3/4”
1/2”
1/2”
3/4”
1”
1-1/4”
298
432
633
208
183
304
441
652
Pullout Values
CONCRETE/MASONRY APPLICATIONS
TAPCON
DIAMETER
3/16”
3000 PSI
CONCRETE EMBEDMENT
HOLLOW BLOCK
EMBEDMENT
1”
1-1/4”
1-1/2”
1-3/4”
1”
1-1/4”
1-1/2”
1-3/4”
341
581
863
1059
209
357
468
547
The values listed are ultimate averages achieved under laboratory conditions and apply to Buildex manufactured fasteners only. Appropriate safety factors should be applied to these values for design
purposes. Wind-load test results also available upon request.
B 59
Gridmate
BR
®
Plastic Insulation
Fasteners
Fastening Insulation To Concrete—
Textured head allows for coverage of stucco.
Fins provided high holding power.
Non cold-conductive.
Non Corrosive.
Made from strong Polypropylene.
Easy to install.
APPLICATIONS
All Polymer Modified (PM) Systems.
Fiberglas fabric over rigid insulation.
Modified Stucco Systems.
Wire mesh over rigid insulation.
Exapnded lath over EPS, XPS or
ISO rigid insulation.
Attaching rigid insulation to masonry
or concrete.
SELECTION CHART
Gridmate BR Anchor
PART NUMBER
REFERENCE NUMBER
DESCRIPTION
HOLE
DIAMETER
MAXIMUM GRIP
BOX QTY
56040
56040
2-3/4"
5/16"
1-1/2"
250
56050
56050
3-1/2"
5/16"
2-1/2"
200
56060
56060
4-3/8"
5/16"
3-1/4"
200
56070
56070
5-1/4"
5/16"
4"
100
PERFORMANCE TABLE
Gridmate BR
BASE MATERIAL
EMBEDMENT
ULTIMATE PULLOUT
25 MPA Concrete
1-1/8"
113 lbs.
Concrete Block
1-1/8"
113 lbs.
Brick
1-1/8"
113 lbs.
8 fasteners per 4' x 8' sheet required.
B 60

Buildex Product Catalogue

Transcription

Similar documents

TEKS® - Buildex

Porteous Fastener Company is pleased to announce

Bridgeport CNC V2XT

type iii structural fasteners

is proud to present the Ductmate Industries proudly presents the

DRILLDOCTOR DD750

As Easy As 1, 2, 3 Makes Adding Levelers To Your Class A

620.075,620.080 rastrillos co

- Malibu Kayaks

PB Nov Garage Used stuff.indd