Fujitsu Myrica V32-1 Tv User Guide Manual

Transcription

Contents
Introduction........................................................................................................................................... 1
Notational conventions ................................................................................................................. 2
Important notes..................................................................................................................................... 2
Safety notes.................................................................................................................................. 2
Cleaning ....................................................................................................................................... 3
Transport ...................................................................................................................................... 4
Power cable.................................................................................................................................. 4
CE marking................................................................................................................................... 4
Disposal and recycling ................................................................................................................. 4
Preparing for use .................................................................................................................................. 5
Unpacking and checking the delivery........................................................................................... 5
Preparing remove control ............................................................................................................. 5
Inserting batteries................................................................................................................. 5
Replacing batteries............................................................................................................... 6
Installing LCD TV ......................................................................................................................... 6
Connections on LCD TV............................................................................................................... 7
Connecting LCD TV ................................................................................................................... 10
Switching LCD TV on/off ............................................................................................................ 11
Setting language of the OSD menu............................................................................................ 12
Carrying out programme search................................................................................................. 12
Adjusting programme settings.................................................................................................... 13
Arranging programmes....................................................................................................... 13
Changing programme properties........................................................................................ 14
Setting the channel............................................................................................................. 15
Add Programs .................................................................................................................... 16
Operation............................................................................................................................................ 17
Operating elements on the device.............................................................................................. 17
Changing the device settings with the buttons of the control panel ........................................... 18
Remote control ........................................................................................................................... 19
PIP (Picture in Picture) ....................................................................................................... 19
Teletext............................................................................................................................... 20
Changing device settings with remote control............................................................................ 21
Description of menus.................................................................................................................. 22
DISPLAY menu - default picture settings ........................................................................... 23
ADVANCED menu - advanced picture settings ................................................................. 24
GEOMETRY menu - picture position and sharpness......................................................... 25
TV SETUP menu - setting channels................................................................................... 26
AUDIO menu - sound settings............................................................................................ 27
SYSTEM menu - system settings....................................................................................... 27
Display modes .................................................................................................................................... 28
Main display mode ..................................................................................................................... 28
PIP mode (Picture in Picture) ..................................................................................................... 29
Technical data .................................................................................................................................... 30
VESA-DDC-compatible VGA interface....................................................................................... 32
Preset operating modes ............................................................................................................. 32
Power consumption .................................................................................................................... 32
PC Analogue (D-SUB)................................................................................................................ 33
PC Digital (DVI-D) ...................................................................................................................... 33
SCART (Half/Full)....................................................................................................................... 34
S-Video....................................................................................................................................... 34
Colour and transmission system by country............................................................................... 35
Troubleshooting.................................................................................................................................. 38
A26361-K1037-Z120-1-M119, edition 1
Downloaded
From TV-Manual.com Manuals
English
Downloaded From TV-Manual.com Manuals
Introduction
Your new LCD TV MYRICA V27-1 / V32-1possesses a whole range of useful features and functions,
e.g.:
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
TFT monitor (Thin Film Transistor; active matrix)
analogue tuner for VHF, UHF and cable programmes
connections for SCART (video and RGB), video and S-Video
minimal space requirements thanks to slim casing
optimum ergonomic characteristics (totally distortion-free and colour purity right into the
corners)
high degree of brightness and good contrast
high resolution for operation on a PC
easy-to-operate remote control
convenient operation via integrated OSD (On Screen Display) menu
2 tuner picture-in-picture, video (secondary) in PC picture (primary)
picture size changeover: full-screen, 4:3, zoom1 (16:9) and zoom2
integrated loudspeakers
integrated NICAM/IGR sound decoder for stereo and two-channel sound
Sleep timer
Teletext
This operating manual contains important information you require to start up and run your device.
For TV operation with the integrated tuner, a terrestrial antenna or a cable connection is required. As
an alternative, a satellite receiver can be connected to one of the SCART jacks.
When you put the device into operation for the first time, you should carry out a programme search
(see the chapter "Preparing for use").
Target group
You don't need to be an "expert" to perform the operations described here. Do, however, read the
"Important notes" chapter in the operating manual of the computer and in this operating manual.
In the event of any problems occurring, please contact your sales outlet or our help desk.
Additional information
Details of how you set the resolution and refresh rate are provided in the documentation on your
screen controller/the associated driver software.
A26361-K1037-Z120-1-M119, edition 1
Downloaded
English - 1
LCD TV MYRICA V27-1 / V32-1
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
!
Pay particular attention to text marked with this symbol. Failure to observe this warning
endangers your life, destroys the device, or may lead to loss of data.
i
Supplementary information, remarks, and tips follow this symbol.
►
Text which follows this symbol describes activities that must be performed in the order shown.
"Quotation marks" indicate names of chapters or terms.
Texts in italics indicate filenames and menu items.
Important notes
!
In this chapter you will find information regarding safety which is essential to take note of
with your LCD TV.
!
This product from Fujitsu Siemens Computers contains intellectual property of third
parties. Any tampering with or modification of the product will void the warranty and may
lead to legal prosecution to the full extent of the law.
Safety notes
This device complies with the relevant safety regulations for data processing equipment, including
electronic office machines for use in an office environment. If you have any questions, contact your
sales outlet or our help desk.
●
The display surface of the LCD TV is sensitive to pressure and scratches. You should therefore
be careful with the display surface so as to avoid lasting damage (Newton rings, scratches).
●
If the device is brought into the installation site from a cold environment, condensation can
form. Before operating the device, wait until it is absolutely dry and has reached approximately
the same temperature as the installation site.
●
During installation and before operating the device, please observe the instructions on
environmental conditions in the "Technical data" chapter as well as the instructions in the
"Preparing for use" chapter.
●
To ensure sufficient ventilation, the intake and exhaust air openings of the device must never
be blocked.
●
The device automatically sets itself to the correct voltage within the range from 100 V to 240 V.
Ensure that the local mains voltage lies within these limits.
●
Ensure that the power socket on the device or the earthed mains outlet is freely accessible.
●
To completely disconnect the mains voltage, remove the power plug from the socket.
●
Lay all cables so that nobody can stand on them or trip over them. When attaching the device,
observe the relevant notes in the "Preparing for use" chapter.
2 - English
Downloaded
A26361-K1037-Z120-1-M119, edition 1
●
If you use a different PC data cable from the one supplied, ensure that it is adequately
shielded. CE conformance and optimum picture quality are guaranteed only if you use the data
cable supplied.
●
No antenna or data transfer cables should be connected or disconnected during a
thunderstorm.
●
Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get inside the
device (danger of electric shock, short circuit).
●
The device is not waterproof! Protect the device from spray water (rain, sea water).
●
In emergencies (e.g. damaged casing, elements or cables, penetration of liquids or foreign
matter), switch off the unit, disconnect the power plug and contact your sales outlet or our help
desk.
●
The device must be disposed of in accordance with the local regulations for disposal of special
waste. The screen background lighting contains mercury. You must observe the applicable
handling and disposal safety regulations for fluorescent tubes.
●
Only qualified technicians should repair the device. Unauthorised opening and incorrect repair
may greatly endanger the user (electric shock, fire risk).
●
You may set only those resolutions and refresh rates specified in the "Technical data" chapter.
●
Use a screen saver with moving images in PC mode and activate the power management for
your monitor to prevent still images from "burning in".
●
Keep this operating manual together with your device. If you pass on the device to third parties,
you should include this manual.
Cleaning
●
Remove the power plug before cleaning the device.
●
Do not clean any interior parts yourself, leave this job to a service technician.
●
Do not use any cleaning agents that contain abrasives or may corrode plastic.
●
Ensure that no liquid will run into the system.
●
Ensure that the ventilation areas of the device are free.
●
The display surface of the LCD TV is sensitive to pressure and scratches. Clean it only using a
soft, slightly moistened cloth.
Wipe the LCD TV casing with a dry cloth. If the monitor is particularly dirty, use a cloth which has
been moistened in mild domestic detergent and then carefully wrung out.
A26361-K1037-Z120-1-M119, edition 1
Downloaded
English - 3
Transport
●
Transport the device with care and only in its original packaging or another corresponding
packaging to protect it from knocks and jolts.
●
Never drop the LCD TV (danger of glass breakage).
Power cable
To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary to
replace the original cable set.
●
The female/male receptacles of the cord set must meet IEC60320/CEE-22 requirements.
●
The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the
outer sheath.
●
For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used.
For devices which sit on the floor, only SJT type cable sets may be used.
●
The cable set must be selected according to the rated current for your device.
CE marking
The shipped version of this device complies with the requirements of the EEC directives
89/336/EEC "Electromagnetic compatibility" and 73/23/EEC "Low voltage directive".
Disposal and recycling
This device has been manufactured to the highest possible degree from materials which can be
recycled or disposed of in a manner that is not environmentally damaging. The device may be taken
back after use to be recycled, provided that it is returned in a condition that is the result of normal
use. Any components not reclaimed will be disposed of in an environmentally acceptable manner.
If you have questions on disposal, please contact your point of sale, our Help Desk or obtain
information at: www.fujitsu-siemens.com/recycling
4 - English
Downloaded
A26361-K1037-Z120-1-M119, edition 1
Preparing for use
Unpacking and checking the delivery
The display surface of the LCD TV is sensitive to pressure and scratches. Always hold the
device by the casing!
!
►
Unpack all the individual parts.
►
Check the delivery for damage incurred during transportation.
►
Check whether the delivery agrees with the details in the delivery note.
The complete LCD TV package includes:
–
–
–
–
–
–
one LCD TV
one power cable
one remote control
two batteries type AAA
this manual
one Warranty Booklet
Should you discover that the delivery does not correspond to the delivery note, notify your local sales
outlet immediately.
i
We recommend that you keep the original packaging material. Keep it for future
transportation.
Preparing remove control
Inserting batteries
i
►
Open the back cover of the remote control by
sliding it in the direction of the arrow.
►
Place the batteries supplied in the battery
compartment. Ensure correct polarity.
►
Close the battery compartment by sliding the
cover back on until you hear and feel it click
into place.
Remove the batteries when not using the remote control for longer periods.
Handle the remote control with care. Do not drop the remote control on the floor.
Do not expose the remote control to moisture, direct sunlight or high temperatures.
A26361-K1037-Z120-1-M119, edition 1
Downloaded
English - 5
Replacing batteries
►
When the batteries are used up, replace them with two batteries of the same type (type AAA).
Do not throw batteries or accumulators into the household waste. They must be disposed of in
accordance with local regulations concerning special waste.
Installing LCD TV
!
To ensure sufficient ventilation, the intake and exhaust air openings of the device must
never be blocked.
>10 cm
>5 cm
>10 cm
>5 cm
>10 cm
>5 cm
When installing the TV in niches, maintain the minimum distance for sufficient ventilation of the
device: 5 cm from the side and back, 10 cm from the top.
6 - English
Downloaded
A26361-K1037-Z120-1-M119, edition 1
Connections on LCD TV
Observe the safety precautions in the "Important notes" chapter in this operating manual.
!
Do not cover the ventilation openings of the monitor.
Never open the housing of the power supply unit. There is extreme danger from an
electrical shock with the housing open. There are no components requiring cleaning or
repairs in the interior.
MYRICA V32-1
1
5 7
3
2
4
6
13
8
9
10
11
12
14
15
16
MYRICA V27-1
13
5 7 8
16
1=
2=
3=
4=
5=
6=
7=
3
4
6
9
Connection terminals for external
loudspeakers
Sliding switch for changing over from
internal to external loudspeakers
DVI port
VGA port
PC AUDIO IN
LINE OUT
SUBWOOFER port
A26361-K1037-Z120-1-M119, edition 1
Downloaded
10
11
8=
9=
10 =
11 =
12 =
13 =
14 =
15 =
16 =
12
14
15
COMPONENT ports (AUDIO)
COMPONENT ports (YPbPr)
RS-232C port
SCART1 port
SCART2 port
AV ports
S-VIDEO IN ports
Antenna port
Power connector
English - 7
The following devices can be connected to this LCD TV:
SPEAKER
Connection terminals for external loudspeakers
red/right/+
black/right/black/left/red/left/+
With the sliding switch you change over from internal to
external loudspeakers and vice versa.
DVI
(white)
Connection for digital video input signals
VGA
(blue)
Connection for analogue VGA input signals
PC AUDIO IN
(blue)
Connection for audio input signals (LINE IN)
LINE OUT
(green)
Port for headphones
SUBWOOFER
(black)
Connection for an active subwoofer
COMPONENT:
Connections for component input signals
Y
green
e.g. for HDTV decoder or HDTV video recorder
Pb
blue
Pr
red
RS-232C
(black)
The connections are located on the back (V27-1) or on the
underside (V32-1) of the LCD TV.
e.g. a PC with a digital output (DVI-D) or for HDTV devices
e.g. for a PC with an analogue output (D-SUB)
AUDIO
red
(right)
e.g. for a PC or for HDTV devices
white
(left)
Serial port
For customer service, e.g. for updating the firmware
8 - English
Downloaded
A26361-K1037-Z120-1-M119, edition 1
SCART1
Connection for AV, RGB and audio input signals
e.g. for satellite receiver, DVD player, video recorder,
camcorder, decoders or a gaming console
Out (TV-signal):
e.g. video recorder, dvd recorder
SCART2
Connection for AV, RGB and audio input signals
e.g. for satellite receiver, DVD player, video recorder, or a
gaming console
Out (picture signal)
AV:
Connections for video and audio input signals
AUDIO
e.g. for DVD player, video recorder, film camera with S-Video
connection or gaming console
red (right)
white (left)
VIDEO
yellow
S-VIDEO IN:
Connections for S-video and audio input signals
AUDIO
e.g. for DVD player, video recorder, a film camera with SVideo connection or a PC
red (right)
white (left)
S-VIDEO
TV-ANT.
antenna port
AC INPUT
Connector for the power cable
A26361-K1037-Z120-1-M119, edition 1
Downloaded
English - 9
Connecting LCD TV
Connecting antenna
►
Connect an antenna cable to the device and the
TV antenna socket.
►
Plug the power cable supplied into the power
connector of the LCD TV.
Connecting the power supply
You will find the power connector on the underside of
the LCD TV.
►
10 - English
Downloaded
Connect the connector of the power cable
supplied into a properly earthed mains outlet and
ensure a secure connection.
A26361-K1037-Z120-1-M119, edition 1
Switching LCD TV on/off
MYRICA V27-1
►
Press the On/Off switch at the lower right on the
front of the LCD TV.
►
Press the On/Off switch at the lower left on the
front of the LCD TV.
MYRICA V32-1
From the indicator at the lower right on the front of the LCD TV you can recognise whether the
device is in operation, in the standby mode or switched off.
Green
=
The device is switched on.
Red
=
The device is in standby mode.
Dark
=
The device is switched off.
A26361-K1037-Z120-1-M119, edition 1
Downloaded
English - 11
Setting language of the OSD menu
After switching on the device, set the language of the OSD (On Screen Display) menu according to
your needs.
►
Switch the LCD TV on with the ON/OFF switch.
►
Press the POWER button.
►
Press the MENU button to open the OSD menu.
►
Choose the SYSTEM menu item using the
►
Press the
button.
button to activate the menu item.
The menu item LANGUAGE is preset.
►
Press the
►
Select the language to be shown in the OSD menu with the
►
Press the Menu button. The OSD menu will be changed over to the selected language.
button.
Carrying out programme search
A programme search must be carried out to put the LCD TV into operation. Use the supplied remote
control.
►
Switch the LCD TV on with the ON/OFF switch.
►
Press the POWER button.
►
►
Choose the TV SETUP menu item using the
►
Press the
button.
The menu item CH-SCAN is preset.
►
Press the
►
Select your country with the
►
Press the
button.
button to start the programme search.
Wait until the programme search is completed. Then the device shows the first programme found.
i
Different programmes are available on some channels at different times. As a result, it is
possible that, depending on the time of a programme search, different programmes will be
found.
12 - English
Downloaded
A26361-K1037-Z120-1-M119, edition 1
i
The programmes will be entered in the programme list in the order in which they are found.
However, you can change the order of the programmes later (see "Arranging
programmes").
Adjusting programme settings
After the programme search, you can change various programme settings later, e.g. the order of the
programmes in the programme list, the programme names or the frequency of a channel. The
following sections contain a description of how to change the settings.
In the following sections "Arranging programmes", "Changing programme properties" and "Setting
the channel" a description of how to set the programmes is provided.
Arranging programmes
With the OSD menu you can rearrange the order of the programmes according to your personal
preferences. To rearrange the order of the programmes, first mark the respective program you want
to move, and then mark the programme with which it is to exchange its position in each case.
►
►
►
Press the
►
Choose the PROGRAM menu item using the
►
Press the
button.
button.
A26361-K1037-Z120-1-M119, edition 1
Downloaded
English - 13
The programme list will be displayed with the first 9 programmes found. If a programme name was
detected during the programme search, it will be displayed.
►
Select the programme you want to move with the buttons
the
/
and mark it by pressing
button.
The marked programme is displayed in green.
►
Select the position at which you want to insert the programme with the buttons
►
Press the button
/
.
. The selected programmes swap their positions.
Changing programme properties
You can change the following properties of a programme:
●
You can change the frequency of a programme.
●
You can change the programme name displayed in the programme list (maximum of 5
characters).
●
You can "Hide" a programme in the programme list (SKIP).
●
You can select a different TV standard.
►
►
►
Press the
►
Choose the PROGRAM menu item using the
►
Press the
button.
button.
The programme list will be displayed with the first 9 programmes found.
►
Press the
button to change to the menu for setting the programme properties.
Setting frequency
►
Mark the property CH with the buttons
►
Set the frequency as required with the
14 - English
Downloaded
/
.
/
buttons.
A26361-K1037-Z120-1-M119, edition 1
Changing programme name
Five characters are available for the programme name.
►
Mark the position for the character you want to change under ID with the buttons
►
Select the desired character at this position with the buttons
►
Repeat this procedure until you have entered the desired programme name.
/
/
.
.
Hiding programme in programme list
If you want to hide a programme in the programme list (SKIP=switched on), the programme is
skipped when you change the programmes with the buttons
/
.
►
Mark the property SKIP with the buttons
►
Switch the SKIP property on or off with the buttons
/
.
/
.
Selecting a different TV standard
►
Mark the property TV SYS with the buttons
►
Select the desired TV standard with the
/
.
/
buttons.
Setting the channel
You can manually set the frequency and the TV standard for each channel.
►
►
button.
►
Press the
►
Choose the MANUAL SCAN menu item using the
►
Press the
button.
Setting frequency
►
Mark the property MHz with the buttons
►
Set the frequency as required with the
/
/
.
buttons.
Selecting a different TV standard
►
Mark the property TV SYS with the buttons
►
Select the desired TV standard with the
A26361-K1037-Z120-1-M119, edition 1
Downloaded
/
/
.
buttons.
English - 15
Add Programs
i
found.
With this function you search for additional programmes when a programme search has already
been carried out. The sorting of the programme list is retained and new programmes found are
added at the end of the programme list.
►
►
►
Press the
►
Choose the UPDATE SCAN menu item using the
►
Press the
button.
button.
►
Select your country with the
►
Press the
button.
button to start the programme search.
Wait until the programme search is completed. Then the device shows the first programme found.
16 - English
Downloaded
A26361-K1037-Z120-1-M119, edition 1
Operation
Controls are provided on the device and the remote control for operating the LCD TV.
Operating elements on the device
The operating controls of the LCD TV are located in the underside of the device. With these buttons
you can operate the basic functions of the LCD TV and the OSD menu.
1
2
3
1 = STANDBY button
for changing over from the Normal mode to
the Standby mode and vice versa
2 = SOURCE button
for selecting the video input source
A26361-K1037-Z120-1-M119, edition 1
Downloaded
4
5
3 = Programme selection button (CHANNEL)
or button for selecting a function
4 = Volume button (VOLUME)
or button for setting values
5 = MENU button
for opening or exiting the OSD menu
English - 17
Changing the device settings with the buttons of the control
panel
Use the buttons of the control panel to make the following device settings directly while the OSD
menu is switched off.
Selecting picture signal source
►
Press the SOURCE button. The current signal input is displayed.
►
Press the SOURCE button repeatedly until the desired signal input appears.
Selecting TV programme
►
Press the ST buttons to change over to the next or previous programme.
Adjusting the volume
►
Press the W / X buttons to adjust the volume.
Opening and operating OSD menu
►
►
Mark the desired menu item with the S/T buttons.
►
Press the X button to open a submenu and activate a menu item.
►
Set the values as required with the W / X buttons.
►
Press the MENU button to return from a submenu to the main menu.
All changes are stored automatically.
18 - English
Downloaded
A26361-K1037-Z120-1-M119, edition 1
Remote control
1 = POWER - switches the device on or into
the standby mode.
1
2
3
4
7
8
5
9
6
10
2 = MUTE - switches the sound on and off.
3 = FREEZE - freezes the video picture.
If you press the button again, the picture
returns to the normal mode.
4 = SLEEP - Sleep timer
By pressing several times you can set the
Sleep timer to 0, 30, 60, 90 or 120 minutes.
PIP (Picture in Picture)
5 = PIPSOURCE - Activates the PIP mode
Press this button once more to select the
signal source for the PIP mode.
6 = SWAP - swaps the display of the main
and the PIP window in the PIP mode
7 = POSITION - changes the position of the
PIP window in the PIP mode
8 = SIZE - changes the size of the PIP
window (3 different sizes)
11
12
9 = MAIN - activates the audio output of the
main display in the PIP mode
10 = PIP - activates the audio output of the
PIP display in the PIP mode
11 = Volume -/+
12 = changing programs
13
13 = 0 - 9
With this button you select the programme
directly.
14 = R - Return
With this button you change back to the
programme previously set.
15
A26361-K1037-Z120-1-M119, edition 1
Downloaded
14
15 = i - Informations
With this button you display the signal status
(input source, channel; audio mode).
English - 19
Teletext
16 = TELETEXT - activates the Teletext
function
If you press the button again, Teletext with the
TV function is activated.
When you press the button a third time, the
Teletext function is switched off.
17 = PREDEFINED SETTINGS
With this button you save favorite Teletext
pages for quick access using the coloured
buttons.
18 = INDEX - opens the Index page
With the number buttons (0 to 9) you can
number the Teletext page and add it to the
selected page or the second element.
16
19
17
18
21
22
24
25
20
23
26
27
28
29
19 = SUB - opens the sub-page (if available)
20 = PAGE UP/DOWN - scrolls in Teletext
21 = SHOW - shows hidden information, e.g.
the answer to a riddle
22 = SIZE - changes the font size
FULL (entire screen) default full-screen
Teletext
TOP (upper half) - the content of the upper
half of the page is shown on the entire screen
BOTTOM (lower half) - the content of the
lower half of the page is shown on the entire
screen
23 = STOP - stops the automatic scrolling of a
Teletext page
24 = R / G / Y / B - opens special pages
Each channel offers its own functions.
25 = ASPECT - changes the page aspect of
the display (4 level)
26 = PICTURE
With this button you select the picture mode.
Possible values: MOVIE, SPORT, GAME,
VIVID, USER
27 = MENU - Opens the OSD menu
28 = AUDIO
With this button you select an audio setting. (4
options)
29 = SOURCE
With this button you select the signal source.
20 - English
Downloaded
A26361-K1037-Z120-1-M119, edition 1
Changing device settings with remote control
You can open and operate the integrated OSD (On Screen Display) menu with the buttons of the
control panel on the LCD TV or the remote control.
The VOLUME- control button is equivalent to the
button on the remote control.
The VOLUME+ control button is equivalent to the
The CHANNELS control button is equivalent to the
The CHANNELT control button is equivalent to the
To set the OSD menu, perform the following steps:
►
►
Mark the desired menu item with the
►
Press the
/
buttons.
button to open a submenu and activate a menu item.
In the individual menus, the buttons available to you in each case are shown.
►
Mark the option you want to change.
►
Set the desired value or activate the desired function.
►
Press the MENU button to return to the main menu from a submenu or to exit the OSD menu.
All changes are stored automatically.
A26361-K1037-Z120-1-M119, edition 1
Downloaded
English - 21
Description of menus
i
The OSD menu is available in different languages. The English menu names are used in
the following description (default setting).
Different menus and different options are available to you depending on the set signal
source. The currently available menus and options are shown brightly highlighted in each
case in the OSD menu.
The following main menus are available to you in the OSD menu:
DISPLAY
Here you set the default picture settings (colours, contrast etc.).
ADVANCED
Here you set the picture mode and the advanced picture settings.
GEOMETRY
Here you set the position and sharpness of the picture.
TV SETUP
Here you set the programmes of your LCD TV.
AUDIO
Here you set the sound of your LCD TV.
SYSTEM
Here you set the language and the transparency of the OSD menu.
22 - English
Downloaded
A26361-K1037-Z120-1-M119, edition 1
DISPLAY menu - default picture settings
For TV/S-VIDEO/SCART/YPbPr:
CONSTRAST (contrast)
This function increases or decreases the contrast.
Possible values: 0 -100
BRIGHTNESS (brightness)
With this function you set the picture brighter or darker.
COLOUR TEMP (colour temperature)
With this button you set the colour temperature.
Possible values: COOL, NORMAL, WARM, USER
For VGA:
RED
GREEN
BLUE
With this function you increase or decrease the intensity of
the marked colour.
WHITE BALANCE
With this function you set the white balance.
BACK LIGHT
For DVI:
With this function you set the intensity of the background
lighting.
Possible values: HIGH, NORMAL, LOW
SATURATION
With this function you set the colour saturation.
HUE
With this function you set the hue redder or greener.
Possible values: -25 - 25
SHARPNESS
With this function you set the sharpness of the picture.
RECALL
With this function you reset all parameters of this menu to
the factory settings.
A26361-K1037-Z120-1-M119, edition 1
Downloaded
English - 23
ADVANCED menu - advanced picture settings
PICTURE MODE
With this function you set the picture mode.
Possible values: MOVIE, SPORT, GAME, VIVID, USER
The following options are only available if you have selected
the USER setting under PICTURE MODE.
NOISE REDUCTION
With this function you set the strength of the noise
reduction.
Possible values: HIGH, NORMAL, LOW
FILM MODE
With this function the received video signals are output in
an aspect ratio of 3:2.
Possible values: ON / OFF
DLC (Dynamic Lumar Correction)
With this function you activate/deactivate the Lumar
correction.
SKIN TONE
With this function you activate/deactivate the skin-colour
correction (yellow and red hues).
NATURE COLOR
With this function you activate/deactivate the natural colour
correction (blue and green hues).
RECALL
24 - English
Downloaded
A26361-K1037-Z120-1-M119, edition 1
GEOMETRY menu - picture position and sharpness
These settings are only available when you use the LCD TV as a monitor for your PC
(SOURCE=PC).
AUTO (automatic setting)
With this function you set the picture settings automatically.
CLOCK
With this function you set the fine tuning of the VGA
alignment for a stable VGA display.
PHASE
With this function you set the focus and the sharpness of
the VGA display.
H-POSITION (horizontal position)
With this function you move the picture to the left or to the
right.
V-POSITION (vertical position)
With this function you move the picture up or down.
RECALL
A26361-K1037-Z120-1-M119, edition 1
Downloaded
English - 25
TV SETUP menu - setting channels
CH SCAN (automatic programme search)
With the
search.
button you start the automatic programme
The automatic programme search must be carried out when
you want to use your LCD TV for the first time following
installation.
A detailed description is provided under "Carrying out
programme search".
The programmes will be entered in the programme list in
the order in which they are found. However, you can
change the order of the programmes later.
A detailed description is provided under "Carrying out
programme search" and "Arranging programmes".
PROGRAM
With this function you change the order of the programmes
in the programme list or the properties of the individual
programme (e.g. porgramme name).
A detailed description is provided under "Arranging
programmes" and "Changing programme properties".
MANUAL SCAN (manual programme setting)
With this function you manually set the frequency and TV
standard of an individual channel.
The set values remain unchanged until an update is carried
out.
A detailed description is provided under "Setting the
channel".
UPDATE SCAN (update programme list)
With this function you search for additional programmes
when a programme search has already been carried out.
The sorting of the programme list is retained and new
programmes found are added at the end of the programme
list.
i
found.
26 - English
Downloaded
A26361-K1037-Z120-1-M119, edition 1
AUDIO menu - sound settings
BALANCE
With this function you set the balance between the left and
the right loudspeaker.
BASS
This button increases or decreases the bass level.
TREBLE
This button increases or decreases the treble level.
SURROUND
With this function you activate/deactivate the surroundsound function of your LCD TV.
RECALL
SYSTEM menu - system settings
LANGUAGE
With this function you set the language of the OSD menu.
OSD BACKGROUND
With this function you set the transparency of the OSD
menu
Possible values: OPAQUE, TRANSLUCENT
RECALL
A26361-K1037-Z120-1-M119, edition 1
Downloaded
English - 27
Display modes
Main display mode
►
Press the SOURCE button on the remote control or on the underside of the LCD TV to select
the source from which the signal for the main display is to come.
For the main display you can select one of the following signal sources:
●
TV
●
CVBS(AV)
●
S-VIDEO
●
SCART1
●
SCART2
●
YPbPr
●
VGA (PC)
●
DVI
By pressing the "i" button (15) you display the designation of the currently selected signal sources
in the upper rihgt corner of the screen (see illustration).
2
3
4
5
6
7
1
8
9
1 = Displayed
main signal
Signal source Main:
2 = Main signal
3 = Programme
4 = Audio mode
8 = Shows the sound source
Signal source PIP:
(Main or Sub-signal)
5 = Sub-signal
6 = Programme number 9 = Displayed Sub-signal
7 = Audio mode
28 - English
Downloaded
A26361-K1037-Z120-1-M119, edition 1
PIP mode (Picture in Picture)
The LCD TV can also display a sub-video signal in addition to the main video signal.
The sub-video signal is shown as a "PIP display" in a window on the main display.
►
Press the PIPSOURCE (5) button on the remote control to activate the PIP mode.
►
Press the PIPSOURCE button again to select the source from which the signal for the PIP
display is to come.
Depending on which source the signal for the main display comes from, you can use certain sources
for the signal of the PIP display.
The following combination options are available to you:
Signal
source
s
Main display
AV
SV
SCART 1
SCART 2
VGA
DVI
YPbPr
TV
-
-
-
-
-
AV
-
-
-
-
-
SV
-
-
-
-
-
SCART 1
-
-
-
-
-
SCART 2
-
-
-
-
-
VGA
-
-
-
DVI
-
-
-
YPbPr
-
-
-
P
TV
A26361-K1037-Z120-1-M119, edition 1
Downloaded
English - 29
Technical data
MYRICA V27-1
MYRICA V32-1
597.12 mm (H) x 335.68 mm (V)
diagonal 26.37 "
708,95 mm (H) x 398,59 mm (V)
diagonal 32,02 "
Picture format:
Wide screen 16:9
Wide screen 16:9
Pixel spacing:
0.1555 (H) x RGB x 0.4665 (V)
mm²
0,1730 (H) x RGB x 0,5190 (V)
mm²
No. of pixels:
1280 (H) x 720 (V)
1366 (H) x 768 (V)
Brightness type:
550 cd/m²
550 cd/m²
Contrast type:
900 : 1
1000 : 1
Screen:
Visible area / screen size:
Response time:
8 ms (mean value)
8 ms (mean value)
Viewing angle type:
176 Grad (horizontal / vertical)
170 Grad (horizontal / vertical)
Lighting life:
Minimum 50.000 hours
Minimum 50.000 hours
Panel technology:
SMVA
SMVA
TV and video input / output:
Analogue tuner input:
75 ohm F-type for antenna/CATV
AV input:
Composite (RCA) + Audio-L/R (RCA)
S-Video input:
4-pole DIM + Audio-L/R (RCA)
Component input:
YPbPr (RCA) + Audio-L/R (RCA)
2 x SCART:
CVBS / RGB (input) und TV/CVBS (output)
PC input/output:
VGA input:
RGB (D-SUB 15-pole) + PC-Audio (3.5 mm socket)
DVI-D / HDCP input:
DVI-D / HDCP input + PC-Audio (3.5 mm socket)
RS232 input:
9-pole D-SUB (only for firmware updates)
Subwoofer output:
Subwoofer output (RCA)
Headphone output:
3.5 mm socket
30 - English
Downloaded
A26361-K1037-Z120-1-M119, edition 1
Compatibility:
TV system:
PAL & SECAM
Video system:
PAL & SECAM
PC:
640 x 350 @ 70 Hz
640 x 480 VGA @ 60 Hz, 72 Hz, 75 Hz
800 x 600 SVGA @ 56 Hz, 60 Hz, 72 Hz
1024 x 768 XGA @ 60 Hz, 70 Hz
1280 x 720 @ 60 Hz
1280 x 768 @ 60 Hz
1280 x 1024 @ 60 Hz
SDTV / HDTV format:
1080i, 576p, 576i (PAL)
Standards:
Security:
UL/CUL, CB, TÜV, PSE, CCC
EMC:
FCC Class B, CE, S symbol, BSMI
MYRICA V27-1
MYRICA V32-1
Input voltage:
AC 100-240V, 2.4 A
50/60 Hz adapter
AC 100-240V , 2.4 A
50/60 Hz
Power consumption:
< 180 W
< 210 W
Standby:
< 8W
< 5W
Operating:
0 - 40 degrees C 20 % -90 %
(non-condensing)
0 - 40 degrees C 10% - 90%
(non-condensing)
Storage:
-20 - 60 degrees C5% - 90%
(non-condensing)
-20 - 60 degrees C10% - 90%
(non-condensing)
2x5W
2 x 8 W (8 Ohm)
Width/height//depth:
680 mm x 520 mm x 240 mm
792 mm x 580 mm x 240 mm
Weight:
15.2 kg
19.3 kg
Power:
Environment:
Audio:
Integrated loudspeakers:
Dimensions:
(height with base)
A26361-K1037-Z120-1-M119, edition 1
Downloaded
English - 31
VESA-DDC-compatible VGA interface
Your LCD TV is equipped with a VESA-DDC-compatible VGA interface and a DVI-D interface.
VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the
communications interface between the LCD TV and the computer. If your computer is equipped with
a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum
operation from your LCD TV and select the appropriate settings.
Preset operating modes
i
The picture position and size have been set to optimum values at the factory for the
operating modes listed above. Depending on the screen controller used, it may be
necessary to adjust the display position and size. In this case, you can change and save
the settings (see the "Operation" chapter).
The following are the most frequently used of the preset operating modes:
Resolution
Refresh rate
640 x 350
640 x 480
800 x 600
1024 x 768
1280 x 720
1280 x 768
1280 x 1024
70 Hz
60 Hz, 72 Hz, 75 Hz
56 Hz, 60 Hz, 72 Hz
60 Hz, 70 Hz
60 Hz
60 Hz
60 Hz
A resolution of 1280 x 720 pixels (on the V27-1) or 1280 x 768 pixels (on the V32-1) is recommended
for ergonomic reasons. Because of the technology used (active matrix) an LCD TV provides a totally
flicker-free picture even with a refresh rate of 60 Hz.
Power consumption
To save energy when the device is temporarily not in use, the LCD TV can be switched into the
standby mode with the remote control (POWER button) or the STANDBY button.
i
Switched on
Standby mode
Power indicator
lights green
lights red
Function
LCD TV is working normally
LCD TV is dark
Power consumption
normal < 180 W (V27-1)
reduced to < 8 W (V27-1)
normal < 210 W (V32-1)
reduced to < 5 W (V32-1)
If the LCD TV is switched into the energy-saving mode, a power consumption of up to 8 W
(V27-1) or 5 W (V32-1) is maintained to enable operation with the remote control.
To completely switch off the power consumption, switch off the device with the ON/OFF
switch (see "Switching LCD TV on/off")..
32 - English
Downloaded
A26361-K1037-Z120-1-M119, edition 1
PC Analogue (D-SUB)
1
5
6
10
15
11
Pin
Meaning
Pin
Meaning
1
Video input red
9
+5 V (DDC)
2
Video input green
10
Sync. earth
3
Video input blue
11
Earth
4
Earth
12
DDC-Data
H. sync
5
Earth
13
6
Red video earth
14
V. sync
7
Green video earth
15
DDC Clock
8
Blue video earth
PC Digital (DVI-D)
1
9
17
Pin
Meaning
Pin
Meaning
Pin
Meaning
1
TMDS Data2-
9
TMDS Data1-
17
TMDS Data0-
2
TMDS Data2+
10
TMDS Data1+
18
TMDS Data0+
3
TMDS Data 2/4
Shield
11
TMDS Data 1/3
Shield
19
TMDS Data 0/5 Shield
4
not connected
12
not connected
20
not connected
5
not connected
13
not connected
21
not connected
6
DDC Clock
14
+5V Power
22
TMDS Clock Shield
7
DDC Data
15
Earth
23
TMDS Clock-
8
Analogue Vertical
Sync
16
Hot Plug Detect
24
TMDS Clock+
A26361-K1037-Z120-1-M119, edition 1
Downloaded
English - 33
SCART (Half/Full)
Pin
Meaning
Pin
Meaning
Pin
Meaning
1
Sound (R) output
8
Changeover voltage
15
Red *)
2
Sound (R) input
9
Green earth *)
16
Blanking *)
3
Sound (L) output
10
Not assigned
17
Video output earth
4
Sound signal earth
11
Green *)
18
Video input earth
5
Blue earth *)
12
Not assigned
19
Video output
6
Sound (L) input
13
Red earth *)
20
Video input
7
Blue *)
12
Blanking earth
21
Shield earth
*) Not used with SCART (Half)
S-Video
Pin
Meaning
1
GND
2
GND
3
Luminance (Y)
4
Chrominance (C)
34 - English
Downloaded
A26361-K1037-Z120-1-M119, edition 1
Colour and transmission system by country
Country
TV
Colour
Albania
B/G
PAL
Austria
B/G
PAL
Azores
B
PAL
Bahrain
B
PAL
Belgium
B/G
PAL
Bulgaria
D
SECAM
B
PAL
B/H
PAL
Canary Islands
Croatia
Cyprus
Stereo
Subtitles
FM-FM
Teletext
Nicam
Teletext
Nicam
Teletext
Nicam
Teletext
B
PAL
D/K
SECAM / PAL
Denmark
B
PAL
Egypt
B
SECAM
Faroe Islands (DK)
B
PAL
B/G
PAL
France
E/L
SECAM
Germany
B/G
PAL
Gibraltar
B
PAL
Greece
B/G
PAL
Hungary
B/G & D/K
PAL
Iceland
B
PAL
Iran
H
SECAM
Ireland
I
PAL
Nicam
Teletext
Israel
B/G
PAL
Nicam
Teletext
Italy
FM-FM
Teletext
Nicam
Teletext
FM-FM
Teletext
Czech Republic
Finland
B/G
PAL
Jordan
B
PAL
Kenia
B
PAL
Luxemburg
Madeira
Malta
B/G
PAL
B
PAL
B/G
PAL
Marocco
B
SECAM
Monaco
L/G
SECAM / PAL
Netherlands
B/G
PAL
A26361-K1037-Z120-1-M119, edition 1
Downloaded
Teletext
FM-FM
Teletext
Nicam
(Budapest
only)
English - 35
Norway
B/G
36 - English
Downloaded
PAL
Nicam
A26361-K1037-Z120-1-M119, edition 1
Country
TV
Colour
Poland
D/K
PAL
Teletext
Portugal
B/G
PAL
Teletext
Rumania
Stereo
Subtitles
G
PAL
D/K
SECAM
B
SECAM
Slovakia
D/K
SECAM / PAL
Slovenia
B/H
PAL
I
PAL
Spain
B/G
PAL
Nicam
Teletext
Sweden
B/G
PAL
Nicam
Teletext
Switzerland
FM-FM
Teletext
Russia
Saudi Arabia
South Africa
B/G
PAL
Tunesia
B
SECAM
Turkey
B
PAL
B/G
PAL
I
PAL
United Arab Emirates
United Kingdom
A26361-K1037-Z120-1-M119, edition 1
Downloaded
Teletext
Nicam
Teletext
English - 37
Troubleshooting
Should an error occur, first check the following points. If the distortion is still not eliminated, the LCD
TV should, if possible, be checked on another signal source and/or with another data cable.
If you are unable to solve the problem, please inform our help desk.
Having this problem?
Check the following points:
No display (power indicator does not light)
►
Display becomes darker
The background lighting has a limited lifetime. If
your screen display should become too dark, the
background lighting will have to be exchanged.
Permanently unlit or lit pixels
The standard of production techniques today
cannot guarantee an absolutely fault-free screen
display. A few isolated constant lit or unlit pixels
may be present. The maximum permitted number
of pixels faults is stipulated in the stringent
international standard ISO 13406-2 (Class II).
No picture (power indicator glows orange)
►
Check the setting of the picture signal
source.
►
Alter the brightness and/or contrast until
you get a picture.
►
Check whether the batteries in the remote
control are still sufficiently charged.
►
Make sure that the sensor for the remote
control on the LCD TV is not exposed to
strong light.
►
The remote control does not work.
Check whether the power cable on the
device is connected correctly.
Please contact our help desk.
Troubleshooting in TV mode
No sound
►
Check the volume setting.
►
Check whether the device is muted.
►
Check that the antenna cable is correctly
connected.
No picture, only static
Reception may be poor.
Picture is fuzzy
►
Check that the antenna cable is correctly
connected.
Reception may be poor.
The picture has dark interference lines and a
strong humming sound can be heard.
There may be an interference signal on the
antenna cable.
►
Have the installation checked.
A sheath current filter from the accessories trade
can provide a remedy.
38 - English
Downloaded
A26361-K1037-Z120-1-M119, edition 1
The picture has shadows or ghost images
Check antenna cable
Use a directional antenna instead of an
omnidirectional antenna.
Picture shows interference, false colours or line
and picture shaking
Check whether the LCD TV is set to the correct
TV standard (PAL or SECAM).
Troubleshooting in PC mode
Picture only black or blue
►
Check the setting of the picture signal
source.
►
Check whether the data cable is correctly
connected.
Message
OUT OF RANGE
or
The input signal (horizontal frequency and
refresh rate) at the displayed input does not
correspond to the technical LCD TV data.
►
Picture only black or blue
Adjust the video frequency range using the
computer software (see documentation for
your computer or your graphics card).
Vertical parts of letters are shown distorted or cut
off
The resolution cannot be shown optimally.
Change over the computer to a resolution
recommended for this TV (see "Preset operating
modes").
Picture position is not correct
The LCD TV recognises an undefined mode (see
"Technical data").
Picture is shaking
A26361-K1037-Z120-1-M119, edition 1
Downloaded
►
Use the OSD function GEOMETRY/AUTO to
carry out the self-adjustment of the LCD TV
(see "GEOMETRY menu - picture position
and sharpness").
►
Set the picture position with the OSD menu
(see "Operation").
►
Check whether the data cable for the LCD
TV is correctly attached to the monitor port
on the computer.
►
Use the OSD function GEOMETRY/AUTO to
carry out the self-adjustment of the LCD TV
(see "GEOMETRY menu - picture position
and sharpness").
English - 39

Fujitsu Myrica V32-1 Tv User Guide Manual

Transcription

Similar documents

View our Events Brochure

Fujitsu Myrica SE32 LCD User Guide Manual

Hotmail/Live/ MSN/Outlook.com

Fujitsu-Siemens H19-1W User Guide Manual

Time Sheet Reminder

Disney Princess Magic Wand Laptop

Step # 13 Open up TMPGEnc 4.0 Express and click on “Start a new

welcome to bell expressvu

Burnout Legends - Sony PSP - Manual

FinePix S3100/FinePix S3500 Quickstart

S5100/ S5500 - Fujifilm USA