DALE EARNHARDT GOODWRENCH SERVICE PLUS ®

KIT 2375
85237500200
DALE EARNHARDT
GOODWRENCH SERVICE PLUS ®
2001 MONTE CARLO™ STOCK CAR
READ THIS BEFORE YOU BEGIN
* ALTERNATIVE ASSEMBLY
* ENSEMBLAGE ALTERNATIVE
* CEMENT TOGETHER
* A COLLER
LIRE CE QUI SUIT AVANT DE COMMENCER
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont mar
quées d'une étoile (★) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente
peu concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant de la coller
en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
In
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before cementing
in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas to be
cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
* DECAL
* DECAL COMANIE
co
* OPTIONAL PARTS
* PIECES EN OPTION
te
r
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
py
Historians may discover that Dale Earnhardt will remain NASCAR’s all-time greatest driver of the Modern Era, (since 1971). His record of seventy six career wins, 281 top five and 428 top ten finishes,
including twenty two pole position starts en route to seven NASCAR Cup Championships might not ever be exceeded. He scored his only Daytona 500 victory, a race the sports media calls “The Superbowl
of Stock Car Racing” in the Fiftieth Anniversary Year of NASCAR at Daytona, Florida; the birthplace of NASCAR.
His record at Daytona is remarkable. Dale Earnhardt was, after 1997, the single most successful driver at Daytona since King Richard Petty. Dale won over four million dollars there; more money than
any other driver in NASCAR history. He was a two-time winner of the Pepsi 400, held on the Independence Day weekend every July. Dale won the Clash, now hailed as the Shootout; the sprint race for past
year pole winners, six times. Dale has won in the International Race of Champions (IROC) at Daytona. Since 1990, Earnhardt had been victorious in his half of the Twin 125 Qualifiers, weekday races that
set the field for Sunday’s Daytona 500, every time he entered until 2000, when the Fords shut him out.
In 1998, when Earnhardt entered the fortieth running of the Daytona 500 there were doubts. After a slim 1997 season, many expected not to see him capture the checkered flag. Richard Childress
Racing was prepared for victory however, as the GM Goodwrench Service Plus Team, led by the former Daytona 500 winning crew chief Larry McReynolds had
all tested well, helping Dale to win
yet another Twin 125 Qualifier. On Sunday, they ran strong and avoided all the trouble on the race track. There was plenty of that, the race in fact
ended
under caution, with the #3 car first to the yellow flag with only a few laps to go. On his way to Victory Lane, Earnhardt was applauded by every
single team on pit row, and crew after crew came out to congratulate him. No one will forget Speedweeks 1998, when Dale Earnhardt and
the Goodwrench team won their first Daytona 500.
Your Revell kit depicts Dale’s Chevrolet as it appeared for the 2001 Daytona 500, or as it appeared in the 2001
shootout with Oreo graphics to fit the most recent Monte Carlo body shell, having the latest roof and cowl flaps,
flush right-side window, vented front air dam, side skirt extensions and jack posts. Quarter windows have
air
circulation vents, connecting to a network of four interior mounted cooling air duct hoses.
The body will lift off to reveal a superspeedway chassis, with single-shock suspension, belt driven oil recirculation pumps on both engine and rear end, inboard mounted oil tank, contoured driver’s seat, and an
up-to-date
full perimeter roll cage. It rides on Aero eight-hole racing wheels and Goodyear radial slicks. Detail include
engine water hoses, and
interior roll bar padding, making this a true state-of-the-art stock car replica.
DECAL APPLICATION INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
Cut desired decal from sheet.
Dip decal in water for a few seconds.
Place wet decal on paper towel.
Wait until decal is movable on paper backing.
Place decal in position on model, face up
and slide backing away.
Press out air bubbles with a soft damp cloth.
Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
Do not touch decal until fully dry.
Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are not compatible with
setting solutions or solvents.
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* DO NOT CEMENT
* NE PAS COLLER
This paint guide is provided to
complete this kit as shown on the box.
Ce guide de peinture est fourni pour reproduire le
modèle réduit qui apparaît sur la boîte.
Aluminum
Aluminum
Flat Black
Noir mat
Gloss Black
Noir lustré
Gloss Red
Rouge lustré
Light Gray
Gris clair
Satin Black
Noir satin
Silver
Argent
Steel
Acier
Yellow
Jaune
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son sup
port en papier.
5. Mettre l'autocollant en position sur le modèle face sur le
dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles
d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell-Monogram Consumer Service Department, 8601 Waukegan Road, Morton Grove, Illinois 60053
Be sure to include the plan number (85237500200), part number, description, your return address and phone number.
Visit our website: www.revell-monogram.com
REVELL-MONOGRAM, LLC Morton Grove, IL. Copyright © 2001. All rights reserved. Made in U.S.A.
1
A
ENGINE ASSEMBLY
B
NOTE: BEND PLUG WIRES SO THAT LONG TABS ON
WIRES FIT INTO DEPRESSIONS ON CYLINDER HEADS
✱
✱
65
CYLINDER
HEAD
ALUMINUM
36
DISTRIBUTOR / WIRES
✱
70
CARBURETOR
93
AIR CLEANER
FLAT BLACK
(PAINT WIRES YELLOW)
ALUMINUM
69
INTAKE
MANIFOLD
ALUMINUM
ALUMINUM
65
CYLINDER
HEAD
30
ENGINE HALF
ALUMINUM
67
ROCKER
COVER
ALUMINUM
29
ENGINE HALF
35
OIL PAN
66
ROCKER
COVER
ALUMINUM
ALUMINUM
ALUMINUM
ALUMINUM
C
py
39
HEADER
STEEL
41
HEADER
64
ALTERNATOR
40
HEADER
32
BELT ASSEMBLY
33
SUMP BELT
STEEL
34
POWER STEERING PUMP
FLAT BLACK
ALUMINUM
In
2
A
38
HEADER
te
r
ALUMINUM
STEEL
FLAT BLACK
co
STEEL
CHASSIS / INTERIOR ASSEMBLY
NOTE:
LEAVE SUPPORT STRAP IN
PLACE UNTIL STEP 4A
B
LIGHT GRAY
(SHADED AREA
SATIN BLACK)
SATIN BLACK
4
FRAME
LIGHT GRAY
7
FIREWALL
LIGHT GRAY
15
RIGHT UPPER
ARM
14
LOWER FRONT
SUSPENSION
C
44
PEDALS
96
LEFT UPPER
ARM
LIGHT GRAY
(SHADED AREA
SATIN BLACK)
ALUMINUM
2
CHASSIS / INTERIOR ASSEMBLY CONTINUED
D
E
6
CAGE SIDE
27
8
ROLL BAR
LIGHT GRAY
LIGHT GRAY
(PAINT SHADED AREA
FLAT BLACK)
49
FIRE EXTINGUISHER
F
25
STEERING
SHAFT
py
GLOSS RED
G
11
STIFFENER
BRACE
STEEL
34
47
SEAT
SATIN BLACK
co
LIGHT GRAY
(SHADED AREA
FLAT BLACK)
33
te
r
52
SHIFTER
H
5
CAGE SIDE
LIGHT GRAY
(SHADED AREAS
FLAT BLACK)
In
FLAT BLACK
44
I
10
STIFFENER
BAR
LIGHT GRAY
(SHADED AREA
FLAT BLACK)
2
CHASSIS / INTERIOR ASSEMBLY CONTINUED
J
K
50
HOSE
48
HOSE
FLAT BLACK
57
PETTY BAR
FLAT BLACK
LIGHT GRAY
51
HOSE
61
HOSE
FLAT BLACK
FLAT BLACK
73
TOP STIFFENER BAR
LIGHT GRAY
(SHADED AREA FLAT BLACK)
FIRST
56
REAR SHELF
9
TOP BRACE
LIGHT GRAY
LIGHT GRAY
SECOND
THIRD
co
LIGHT GRAY
(SHADED AREA
FLAT BLACK)
SECOND
12
KICKER BAR
ASSEMBLY
M
py
L
72
MIRROR
FLAT BLACK
(MIRROR FACE SILVER)
92
REAR SUSPENSION
ADJUSTMENT TUBES
LIGHT GRAY
te
r
13
FUEL CELL
LIGHT GRAY
(PAINT SHADED
AREA ALUMINIUM)
In
FIRST
3 SUSPENSION / CHASSIS ASSEMBLY
A
59
OILER TANK
ALUMINUM
22
SHOCK ASSEMBLY
LIGHT GRAY
(SHADED AREA ALUMINIUM)
3
SUSPENSION / CHASSIS ASSEMBLY CONTINUED
B
17
ARM ASSEMBLY
LIGHT GRAY
(PAINT SHADED AREA SATIN BLACK)
19
FRONT AXLE
SATIN BLACK
21
SPRING
21
SPRING
SATIN BLACK
18
REAR AXLE
SATIN BLACK
SATIN BLACK
A
37
PUMP BELT
FLAT BLACK
20
COOLANT PUMP
ALUMINUM
CHASSIS DETAIL ASSEMBLY
In
4
te
r
co
py
C
16
EXHAUST
OUTLET HALF
B
90
EXHAUST
STEEL
THIRD
STEEL
SECOND
43
DRIVE SHAFT
SATIN BLACK
(SHADED AREAS STEEL)
FIRST
4
CHASSIS DETAIL ASSEMBLY CONTINUED
C
D
54
FRAME
BRACE
75
PILLAR
BRACE
63
PILLAR
BRACE
LIGHT GRAY
LIGHT GRAY
53
STEERING
COLUMN
FLAT BLACK
46
STEERING
WHEEL
FLAT BLACK
LIGHT GRAY
54
FRAME
BRACE
23
DASHBOARD
FRONT
LIGHT GRAY
FLAT BLACK
104
DASHBOARD
TOP
py
FLAT BLACK
31
FAN SHROUD
F
ALUMINUM
27
UPPER HOSE
62
RADIATOR
ALUMINUM
In
ALUMINUM
(PAINT SHADED
AREAS FLAT BLACK)
te
r
E
co
PAINT GAUGE FACES GLOSS
BLACK WITH SILVER DETAILS
FLAT BLACK
28
LOWER HOSE
ALUMINUM
G
16
SHOCK ASSEMBLY
LIGHT GRAY
(PAINT SHADED ALUMINUM)
5
FINAL ASSEMBLY
A
2
HOOD
GLOSS BLACK
VE
O
M
0
0
6
0
0
RE
BODY
GLOSS BLACK
(INSIDE LIGHT GRAY)
✱
✱
✱
✱
✱
CLEAR
co
✱
✱
CLEAR
CLEAR
CLEAR
114
REAR SIDE
WINDOW
110
WINDSHIELD
py
B
113
REAR SIDE
WINDOW
111
REAR WINDOW
✱
VE
RE
115
SIDE WINDOW
112
VENT DUCT
CLEAR
In
CLEAR
0
60
00
te
r
✱
MO
NOTE: PAINT ALL WINDOW TRIM SATIN BLACK
D
C
76
OUTER WHEEL
(BACK)
GLOSS BLACK
E
V
MO
RE
26
OUTER WHEEL
(FRONT)
0
60
00
GLOSS BLACK
24
INNER WHEEL
(FRONT)
FLAT BLACK
TIRE
12
INNER WHEEL
(BACK)
FLAT BLACK
95
DISC BRAKE
ALUMINIUM
py
co
te
r
In
Daytona 500 Version
Shootout- Version
85237500200
DECAL PLACEMENT
6