MS53i2 - Quest International

MS53i2
21.3”, 5MP LCD MONITOR
for Mammography and Diagnostic Applications
Reliable
Quality
and
Stability
Reliable
Quality
and
Stability
Reliable
Quality
and
Stability
Reliable
Quality
Stability
Reliable
Quality
andand
Stability
Reliable
Quality
andcontrol
Stability
λ-Sentinel
IIIIconsists
sensor
circuit.
λ-Sentinel
consistsofofaaluminance
luminance
sensorand
andaaluminance
luminance
control
circuit.
account,
account,highly
highlyaccurate
accurateluminance
luminancecontrol
controlisisachieved.
achieved.
Luminance
Luminancestabilizing
stabilizingsystem
systemλ-Sentinel
λ-SentinelIIII
Luminance Stabilizing System λ-Sentinel II
λ-Sentinel
II consists
ofstabilizing
ainto
luminance
sensor
and
a luminance
• Luminance fluctuations caused by the
Luminance
λ-Sentinel
The
sensor
ininintegrated
the
front
bezel,
directly
against
the
Theluminance
luminance
sensor
integrated
into
the
frontsystem
bezel,
directly
against
theII
Luminance
stabilizing
system
λ-Sentinel
II into
control
circuit.
The
luminance
sensor
is
integrated
the
front
LCD are
taken intoincluding
account,
and highly
screen,
monitors
and
accurately
stabilizes
luminance ononthe
Actual
measurements
intermediate
luminance
screen,and
andconstantly
constantly
monitors
and
accuratelysensor
stabilizes
thecircuit.
Actualluminance
luminance
measurements
including
intermediate
luminance
λ-Sentinel
IIofconsists
ofthe
a luminance
and constantly
a luminance
luminance
control
Luminance
stabilizing
system
λ-Sentinel
II monitors
bezel,
directly
against
screen,
and
accurate luminance control is achieved.
λ-Sentinel
II
consists
a
luminance
sensor
and
a
luminance
control
circuit.
screen
surface
byThe
sending
feedback
instantaneously
to
the
control
circuit.
are
taken
on
the
screen
surface.
screen
surface
by
sending
feedback
instantaneously
to
the
control
circuit.
are
taken
on
the
screen
surface.
account,
highly
accurate
luminance
control
is
achieved.
luminance
sensor in integrated
into the on
frontthe
bezel,screen
directly against
the by account, highly accurate luminance control is achieved.
and accurately
stabilizes
luminance
surface
The luminance
sensorofinaintegrated
into
theand
fronta luminance
bezel, directly
against
the
λ-Sentinel
II consists
luminance
sensor
control
circuit.
screen,
and constantly
monitors
and accurately
stabilizes
luminance
on the
sending
feedback
to the
control
circuit.
screen,
and
constantly
monitors
and
accurately
stabilizes
luminance
on
the
The luminance
into the instantaneously
front bezel, directly
screensensor
surfaceinbyintegrated
sending feedback
to theagainst
controlthe
circuit.
screen surface
by sending
feedback
to theluminance
control circuit.
screen,
and constantly
monitors
andinstantaneously
accurately stabilizes
on the
Ambient
Ambient
lightsensor
sensor
screen surface by sending feedback instantaneously
to thelight
control
circuit.
A built-in light sensor calibrates for
ambient
light conditions.
A
built-inavailable
light
calibrates
for
Ambient
light sensor
sensor
available ambient light conditions.
.
A built-in light
sensor calibrates for
Luminance
sensor
Luminance
sensor
available ambient light conditions.
The
sensor
continuously
Luminance
sensor
Theluminance
luminance
sensor
continuously.
monitors
and
stabilizes
luminance
on
Luminance
sensor
monitors
and
stabilizes
luminance
on
The luminance sensor
continuously
oating )
er)
16Bit
LUT
LED
splay
ating )
16Bit
LUT
Feedback
Feedback
In adm
milli
milli
Front
FrontSensor
Sensor
Feedback
.
Fluctuation
Fluctuation
Front Sensor
Front Sensor
Front
Sensor
Front
Front
Fluctuation
Front
Fluctuation
Backlight
the
screen
surface.
LCD
the
surface.
LCDPanel
PanelFront
monitors
and stabilizes
luminance on
Thescreen
luminance
sensor
continuously
Luminance
sensorsurface.
Backlight Fluctuation LCD Panel
screen
monitorsthe
and
stabilizes luminance on
Front
the screen
surface.
The
luminance
sensor continuously
LCD Panel
Backlight
monitors and stabilizes luminance on
the screen surface.
LCD Panel
Backlight
Backlight
Optional AR Coating* for Film-Like
Black
and
Improved
Sharpness
and
improved
sharpness
and
improved
sharpness
and
improved
sharpness
Driven by
each
sub-pixel
value
corresponding
to
Driven
by each
sub-pixel value
corresponding
to detailed information
recorded
ISD Technology
In adI
are taken on the screen surface.
AAbuilt-in
built-inlight
lightsensor
sensorcalibrates
calibratesfor
for
Ambient
light
sensor
available
ambient
light
conditions.
available
ambient
light
conditions. .
Ambient light sensor
.
splay
ndicator
• Actual luminance measurements
Actual luminance measurements including intermediate luminance
Actual
luminance
measurements
including
luminance
including
intermediate
luminance
are
account,
highly
luminance
control intermediate
is achieved.
are taken accurate
on the screen
surface.
Feedback
Feedback
are
taken
on
the
screen
surface.
taken
on
the
screen
surface.
Actual luminance measurements including intermediate luminance
NN
N
UU
U
L
Lum
Lum
Driven
Drivenbybyeach
eachsub-pixel
sub-pixelvalue
valuecorresponding
correspondingtotodetailed
detailedinformation
informationrecorded
recorded
and TOTOKU's
improved
sharpness
information
recorded
into the
original
image,
in
an
original
image,
three
times
resolution
enhancement
is
achieved.
new
SpecialAR
AR
coating
technology
properties
Driven
by
each
sub-pixel
value
corresponding
detailed
information
recorded
ininanandetailed
original
image,
three
times
resolution
enhancement
is
achieved.
TOTOKU's
new
Special
technology
addresses
properties
original image, three times resolution enhancement is achieved.
TOTOKU's
new
Special
AR
coating
technology
addresses
properties
Optional
on the
MS53i2
iscoating
a special
ARaddresses
(anti-reflective)
three
times
resolution
enhancement
is
achieved.
and
improved
sharpness
In
addition,
up
to
1276
shades
of
gray
are
now
simultaneously
displayable
by
of
focus,
noise
reduction,
contrast,
and
viewing
angle
achieving
in
an
original
image,
three
times
resolution
enhancement
is
achieved.
TOTOKU's
new
Special
AR
coating
technology
addresses
properties
InInaddition,
upup
toeach
1276
shades
ofofgray
are
now
simultaneously
displayable
byby coating
technology
thatcontrast,
addresses
focus,angle
noise
of
focus,
noise
reduction,
and
viewing
achieving
addition,
to
1276
shades
gray
are
now
simultaneously
displayable
Driven
by
sub-pixel
value
corresponding
to
detailed
information
recorded
of
focus,
noise
reduction,
contrast,
and
viewing
angle
achieving
In Inaddition,
up
toshades
1276
ofsimultaneously
gray are now
theupupgraded
ISD
technology.
addition,
to 1276
ofshades
gray are now
displayable by
of focus, noise
contrast,
and viewing
angle achieving
reduction,
contrast,
viewing
angle,
achieving
the
ISD
in an
original
image,
three times
resolution
enhancement
is achieved.
TOTOKU's
new reduction,
Special ARand
coating
technology
addresses
properties filmtheupgraded
upgraded
ISDtechnology.
technology.
simultaneously
displayable
by the
ISD technology.
the
upgradedupISD
technology.
In addition,
to 1276
shades of gray
are now simultaneously
displayable by
Pixel
Conventional
elements LCD with ISD
Pixel
Pixel
LCD
the upgraded ISD technology.
Conventional
Conventional elements
Pixel
elements LCD
Conventional
with
withISD
ISD
LCD
elements LCD
LCD
Sub-pixels
LCD with ISD
LCD
Pixel
Sub-pixels
Conventional
Sub-pixels
Sub-pixels
elements LCD with ISD
LCD
Sub-pixels
One pixel
element
Original image data recorded in FPDs or CRs
One pixel
One
pixel
One pixel
element
element
element
Original image
data recorded in FPDsLCD
or CRs
One pixel Conventional
with ISD
LCD
Original image
data recorded in FPDs or
CRs
element Original image data recorded in FPDs or CRs
Original image data recorded in FPDs or CRs
LCD with ISD
Conventional LCD
Conventional
ConventionalLCD
LCD
Conventional LCD
LCD
LCDwith
withISD
ISD
Displayed
LCD with ISD
images
like black
accurate
reproduction
ofachieving
images.
of focus, and
noise reduction,
contrast,
andAR
viewing
angle
Optional
coating
Optional
Optional AR
ARcoating
coating
Optional
AR coating
Outside light
Transmitted light
Layer of Outside
AR
Transmitted
Outside
light
Transmitted
light
Optional
AR coating
Outside
lightlight
Transmitted
light light
Layer
Layer
ofAR
AR
Layer
of of
AR
LCDOutside
panel light Transmitted light
Layer of AR
LCD
panel
LCD
panel
LCD
panel
properties of noise, focus, contrast and viewing angle.
LCD panel
The optional AR coating of the MS53i2/AR reduces
properties of noise,
focus, contrast
and(Anti-)
viewing
angle.
Standard
AG
processing
ofofnoise,
contrast
and
angle.
properties
noise,
focus,
contrast
andviewing
viewing
angle.
diffuseproperties
reflection
andfocus,
improves
properties
of noise,
properties
of noise,
focus,
contrast and
viewing angle.
focus,
contrast
and
viewing
angle.
Standard AG (Anti-) processing
Transmitted light
Outside light
Standard
AG
Standard
AG(Anti-)
(Anti-)processing
processing
Beads
Standard
AG
(Anti-)
processing
Outside light Transmitted light
OS
OS
inclu
ope
inclu
ope
L
Transmittedlight
light
Outsidelight
light Transmitted
Beads Outside
Outside
light Transmitted light
LCD
panel
Beads
Beads
Beads
LCD panel
LEA
ALE
gla
LCD panel
A gla
Displayed
images
Displayed
Displayed
Displayed
*Customized viewer software
is required to display images with enhanced resolution by the ISD technology
images
images
appearance
mirrored on the screen. However, transmitted light
images
LCD
panel
LCD
panel
*ISD technology is built in MS series
only
*Customized viewer software is required to display images with enhanced resolution by the ISD technology
increased noise.
appearance mirrored on the screen. However, transmitted light
LED
*ISD technology is built in MS series only
Provided
beads diffusely reflect the light to reduce
viewer
software
isisrequired
totodisplay
images
with
enhanced
by the
ISD
technology
ndicator*Customized
*Customized
viewerviewer
software
required
images
enhanced
resolutionby
the
ISD
technology *The images explain general ideas of each mechanism and may be
*Customized
software
is required
to display
images
with
enhancedresolution
resolution
ISD
technology
*Customized
viewer
software
isdisplay
required
towith
display
images
withbythe
appearance
mirrored
on
the
screen.
However,
transmitted
light
background
appearance
on the
screen.
appearance
mirrored
on the
screen.
However,
transmitted
light
appearance
mirrored
on
themirrored
screen.
However,
transmitted
light
increased
noise.
*ISD
isisbuilt
MS
only
*ISD technology
built
inseries
MS series
*ISDtechnology
technology
builtisinin
MSseries
onlyonly
Remote grayscale check
However, transmitted light is also diffusely reflected
and remote calibration functions
increased
noise.
increased
noise.
increased
noise.
*The
images
ideas of each mechanism
causing
focusexplain
loss general
and increased
noise. and may be
Remote grayscale check
Conformancecalibration
testing to DICOM GSDF
and calibration can be remotely
*The
images
explain general
ideas of each
mechanism
and may be may be
and
remote
*The
images
general
Uniformity
equalizer
*The
imagesexplain
explain
generalideas
ideasofofeach
eachmechanism
mechanismand
and may be
Remote
grayscale
checkfunctions
*AR coating
model:
MS53i2/AR
Remote
grayscale
check
Remote
grayscale
check
accomplished. These
features minimize the burden on display administrators.
and
remote
calibration
functions
to DICOM GSDFAuthorized
and
calibration
can be remotely
Is built in to achieve
highly accurate luminance and color uniformity
Distributor
and
remote
calibration
functions
andConformance
remotetesting
calibration
functions
Uniformity
equalizer
across
the
screen.
accomplished.
These
features
minimize
the
burden
on
display
administrators.
Conformance testing to DICOM GSDF and calibration can be remotely
800.231.6777
Uniformity
Conformance
testing
totoDICOM
GSDF
and
beberemotely
Is Uniformity
built in to achieveequalizer
highly
accurate luminance and color uniformity
Conformance
testingThese
DICOM
GSDF
andcalibration
calibration
candisplay
remotely
accomplished.
features
minimize
the burdencan
on
administrators.
equalizer
Uniformity
equalizer
across
the
screen.
accomplished.
accomplished.These
Thesefeatures
featuresminimize
minimizethe
theburden
burdenonondisplay
displayadministrators.
administrators.
Is built in to achieve highly accurate luminance and color uniformity
IsIsbuilt
Management Terminal
built
intotoachieve
achievehighly
highlyaccurate
accurateluminance
luminanceand
andcolor
coloruniformity
uniformity
across
the in
screen.
enhanced resolution by the ISD technology.
D
Di
Di
(
Luminance: 300cd/m2
Gamma: DICOM GSDF
LCD panel
Luminance: 300cd/m2
Gamma: Gamma 2.2
Landscape
: 474software
(W) X 468.4
/ 529.9
(H)images
X 220with
(D)mm
*Customized viewer
is required
to display
enhanced resolution by the ISD technology
appearance mirrored on the screen. However, transmitted light
*ISD technology
builtXin521.9
MS series
only (H) X 220 (D)mm
Portrait
: 367is(W)
/ 583.4
Remote Calibration Functions
increased noise.
*The images explain general ideas of each mechanism and may be
Conformance testing to DICOM GSDF and calibration
Conformance
DICOM GSDF These
and calibration
can be
remotely the
can betesting
donetoremotely.
features
minimize
accomplished.
features administrators.
minimize the burden on display administrators.
burden These
on display
CCL256i2/AR (Special AR Coating )
CCL256i2/F (Protective Filter)
rating status.
CCL256i 2
950
21.3"
CCL256i2/AR (Special AR Coating )
CCL256i2/F (Protective Filter)
DisplayPort
&
DVI - D
10-bit
OSD
LUT
Luminance
Uniformity
Correction
Hardware
Pivot
LED
Indicator
287.9
display
16Bit
900:1 Calibration
function
cd/m2
525.15
900 : 1 (typ)
950cd/m 2 typ. (calibrated
to 410cd/m 2 and 300cd/m 2 by factory default )
LAN
Next Generation Interface - DisplayPort
Agent
* Color uniformity equalizer is built in color models only.
*Images shown are for illustrative purposes only.
344
220
Environmental Regulations
Agent
3
Agent
Is built
in to achieve highly
accurate
2 Megapixel
21.3"
Colorluminance
Displayand color uniformity
390
across the screen. 339.2 ( AR )
474.5
423.7 ( AR )
424.4 ( F )
21.3-inch, TFT Color Active matrix IPS technology
1200 X 1600
MS53i2 Specifications
340.4 ( F )
Management Terminal
ce is 432mm X 324mm
usted.
The display is in
An error
is detected.
0.270mm
X
0.270mm
Luminance
Calibration
command
l the LED
powerdata
save mode.
)
Uniformity equalizer
360.4
Remote grayscale check
gs, total
and remote calibration functions
367
MS33i2
In addition to a DVI port, each i2 series display includes
a new digital 11bit
display interface,
"DisplayPort". When using the DisplayPort, up
8bit
320
dditio
Simultaneous
display of 2048 shades of gray
Performance monitoring software
TOTOKU
displays
and
graphics
cards
are
compliant
with
million
colors
(10-bit
in
each
R,
G,
B)
are
simultaneously
displayed
on
our
color
model.
is achieved.
Combined with a viewer software, 2048 shades of grapy (11 bit) can be simultaneously
the European Union Directive 2002/95/EC for the
intermediate
luminance
displayed.
It realizes smoother grayscale display required for medical image displays.
Restriction of the use of the Hazardous Substances in
*Customized
viewer software
and graphics ca
Electrical
Electronic
Equipment
This
enables
smooth
andand
accurate
display
of
addition
to a
DVIeach
port,
the MS53i2
display
includes
InInaddition
to a DVI
port,
i2 series
display includes
a new
digital display interface, "DisplayPort".
When
using
the DisplayPort,
up(RoHS).
to 1024 or 10-bit
display
10-bit images.
*A viewer
software
thatdisplay
supports TOTOKU's
multi-shade
display system
a new
digital
interface,
DisplayPort.
Whenis required subtle differences in shades of gray. Additionally,
ort display
* For details, please refer to our website.
Calibration
software
for using
2048 shades
of
gray
simultaneous
display.
1073.74 million colors (10-bit in each R, G,dditionally,
B) are 1073.74
the DisplayPort,
up to 1024 or 10-bit shades
of
to constant
Acceptance
and
*1276 shades of gray
are simultaneously
displayable by the ISD technology.
287.9
million
(10-bit in each R, G,displayed.
B) are simultaneously displayed on our color
model.
simultaneously
displayed on our color model.
gray colors
are simultaneously
User-friendly Functions
*Customized viewer software and graphics card
*Customized
and graphics card are required to
are
required toviewer
displaysoftware
10-bit images.
220
display 10-bit 344
images.
3
constancy
testing
*Color models
display 256
shadessoftware
of gray(8bit) or 1024 shades of gray(10bit) out of
4081 shades of gray.
Front *Images
Sensor shown are for illustrative purposes only.
360.4
524.9
426
474
The Next Generation
- DisplayPort
Next Generation
Interface -Interface
DisplayPort
MS23i2 / CCL256i2 / CCL356i2
Worldwide Medical
Safety
367
327.3
and EMI Standards
Luminance/gamma settings are selectable from three preset levels according to the needs.
high performance display systems that are ecological and environmentally
TOTOKU medical displays comply with various
nt
onsidering the Global Environment
User-Friendly Functions
User-friendly Functions
Worldwide Medical Safety and
EMI standards
287.9
360.4
524.9
474
435.5
stringent worldwide medical standards.
TOTOKU
medical image displays comply with various stringent worldwide
d new power-saving
features
in
our
i2
series
displays.
These standards ensure safety and reliability
User-Selectable
medical
standards.
They
ensure
safety and facilities.
reliability required for use in
ion dims the backlight as the screensaver activates, thereby reducing power
required for
use
in medical
medical
facilities.
Display
Configurations
ecessary backlight
deterioration,
resulting in a longer lasting display. Our
udes
a newly
improved powersettings
save mode,
allows the three
displaypreset
to enter
addresses
properties
Luminance/gamma
arewhich
selectable
levels according to the needs.
Luminance and
gamma
settingsfrom
are
atts
of
energy
consumption.
ng angle achieving
selectable from three preset levels
ng
configurations enable stress free
operations without specialized settings.
Luminance: 410 cd/m2
Gamma: DICOM GSDF
d light
ng angle.
2
344
Luminance: 300cd/m
Gamma: DICOM GSDF
3
s required to
set up the Advanced
Savings
feature.
according
to thePower
needs.
User-selectable
220 300cd/m2
Luminance:
Gamma: Gamma 2.2
Authorized Distributor
OSD information display
www.questinc.com
TOTOKU has obtained ISO14001 and ISO9001/ISO13485
environment
and quality
Luminance:
cd/m
JQA-EM0674
2 control
2
including
actual 410
measurement
ofmanagement
luminance,
calibration
settings,
total respectively.
Luminance:
300cd/m
Luminance: 300cd/m
2
ISO 9001
ISO 13485
Medical Mammography LCD
MS53i2
LCD
21.3” Monochrome, TFT active matrix
MegaPixels
5 MegaPixels
Resolution
2048 X 2560 (portrait)
ISD: 2048 X 7680 (sub-pixel)
For 15MP-ISD mode customized software is required
Display Area
21.3” diagonal, 422.4mm x 337.9mm
Pixel Pitch
0.165mm x 0.165mm
Maximum Luminance
1100 cd/m² (typ)
500 cd/m² (calibrated)
410 cd/m² (factory default)
Contrast Ratio
850:1
Display Colors
256 shades of gray out of 12241 shades of gray
1024 shades of gray (DisplayPort 10 bit input)
Simultaneous display of 2048 shades of gray
(ISD ON: 1276 shades of gray) are possible with the
customized viewer.
Calibration
Luminance, Gamma, Capability of saving 3 sets of
LUT settings. (An optional calibration kit is required.)
Video Interface
DVI-D (DVI 1.0 compliant), DisplayPort
Automatic Brightness Stabilization
λ Sentinel II
USB-hub
1 USB upstream connector
2 USB downstream connectors
Viewing Angle
170° Vert., 170° Hor.
Protective Panel
Plastic Protective Panel
Anti-Reflective Panel model: MS53i2/AR
Regulatory Approval
UL60601-1, CSA C22.2 No.601.1, FCC-B, VCCI-B, MDD/
CE, RoHS (FDA 510(k) CCC proceeding)
Dimensions
Landscape:
Portrait:
474.5 (W) X 479.9 / 541.4 (H) X 220 (D)mm
390 (W) X 522.2 / 583.7 (H) X 220 (D)mm
Display Base
Tilt, Swivel, Height, Pivot adjustments
Mount
VESA 100x100
Operating
Environment
40° - 100° F
20 - 80% relative humidity
0 - 10,000’ altitude
Input Power
100V ~ 240VAC, 50/60Hz,
Built-in AC power supply
Power Consumption
90W typical
Warranty
5 Year
800.231.6777
www.questinc.com
© Copyright 2012 Quest International, Inc. * This information is subject to change at any time. MAR-557 (7-12)
The MS53i2 incorporates an
integrated front luminance sensor
and an internal temperature
sensor which collects, analyzes
and stabilizes luminance,
eliminating backlight fluctuation.
Additionally, the backlight rise
time achieves DICOM calibrated
luminance levels in under a
minute. This new generation of
luminance technology is called
λ-Sentinel II®.
In 1999, Quest International
added Totoku medical displays
to its line of products. As the first
Authorized Master Distributor in
North America, the Quest/Totoku
partnership brought together
two leading companies, equally
committed to display technology
for the medical community.
Whether collaborating on
customer specific, customized
solutions or working with
internationally respected
scientists and technicians for
design enhancements with a
global reach, together, Quest
and Totoku have brought
advancements to all facets of
medical displays.
THIRTY
YEARS
Quest International, Inc., 65 Parker, Irvine, CA 92618