Tool selector

Transcription

Tool selector

Tool selector
Choose the safest and most productive Hilti tool
Contents
Page
Rotary Hammers __________________________________________________________________ 2
Combihammers ___________________________________________________________________
3-4
Chiseling demolition _______________________________________________________________ 5
Drilling steel ____________________________________________________________________ 6 - 9
Drilling concrete ___________________________________________________________________10
Impact Fastening _________________________________________________________________ 11
Diamond coring ________________________________________________________________12 - 14
Diamond cutting _________________________________________________________________ 15
Angle grinders __________________________________________________________________
16
Steel cutting tools _________________________________________________________________
17 - 27
Direct Fastening ___________________________________________________________________28
Saws _________________________________________________________________________
29 - 30
How to read the Tool Selector ________________________________________________________31
Disclaimer _____________________________________________________________________
www.hilti.com
32
1/32
Cordless rotary hammers
Tool
Dust
removal
available
Emission
sound
pressure
level*
Basic tool data
Emission
Triaxial
sound
vibration
power
value*
level*
Uncertainty
K
Time
to EAV
Time
to ELV
Work piece
material
Productivity data
Number of holes to EAV 2.5 m/s2
(ELV 5 m/s2) for drilling diameter (mm)
HSE points per hole
Consumable
TE 2-A (01)
DRS-S
86 dB(A)
97 dB(A)
14.5 m/s2
1.5 m/s2
14 min.
57 min.
concrete
40 N/mm²
TE-CX
TE 2-A22 (02)
DRS-S
92 dB(A)
103 dB(A)
15.0 m/s2
1.5 m/s2
13 min.
52 min.
concrete
40 N/mm²
TE-CX
TE 4-A22 (01)
no
88 dB(A)
99 dB(A)
11 m/s2
1.5 m/s2
25 min.
100 min.
concrete
40 N/mm²
TE-C3X
TE 6-A (01)
DRS-S
90 dB(A)
101 dB(A)
11 m/s2
1.5 m/s2
25 min.
99 min.
concrete
40 N/mm²
TE-CX
TE 6-A36-AVR (03)
DRS-TE6-A
88 dB(A)
99 dB(A)
9 m/s2
1.5 m/s2
37 min.
148 min.
concrete
40 N/mm²
TE-C3X
TE 7-A (01)
DRS-M
88 dB(A)
99 dB(A)
11 m/s2
1.5 m/s2
25 min.
99 min.
concrete
40 N/mm²
TE-CX
Hole depth 50mm
6
8
129
119
(516)
(476)
0.8
0.8
136
105
(544)
(420)
0.74
0.95
198
230
(792)
(920)
0.5
0.4
251
219
(1004)
(876)
0.4
0.5
318
366
(1272)
(1464)
0.3
0.3
228
237
(912)
(948)
0.4
0.4
10
47
(188)
2.1
40
(160)
2.50
118
(472)
0.8
94
(376)
1.1
162
(648)
0.6
126
(504)
0.8
12
36
(144)
2.8
36
(144)
2.78
125
(500)
0.8
75
(300)
1.3
185
(740)
0.5
112
(448)
0.9
Hole depth 100mm
14
16
88
(352)
1.1
61
(244)
1.6
139
(556)
0.7
85
(340)
1.2
18
67
(268)
1.5
45
(180)
2.2
90
(360)
1.1
69
(276)
1.4
20
35
(140)
2.9
* Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 60745-2-x. Uncertainty (k): noise 3dB.
Rotary hammers
Tool
Dust
removal
available
Emission
sound
pressure
level*
Basic tool data
Emission
Triaxial
sound
vibration
power
value*
level*
Uncertainty
K
Time
to EAV
Time
to ELV
Work piece
material
Productivity data
HSE points per hole
Consumable
TE 1 (02)
DRS-S
89 dB (A)
100 dB (A)
15 m/s2
1.5 m/s2
13 min.
52 min.
concrete
40 N/mm²
TE-CX
TE 2 (all types) (01)
DRS-S
89 dB (A)
100 dB (A)
16 m/s2
1.5 m/s2
12 min.
47 min.
concrete
40 N/mm²
TE-CX
TE 2 (02) all types
DRS-S
91 dB (A)
102 dB (A)
13.5 m/s2
1.5 m/s2
16 min.
66 min.
concrete
40 N/mm²
TE-CX
TE 6-S (01)
DRS-M
87 dB (A)
98 dB (A)
11 m/s2
1.5 m/s2
25 min.
99 min.
concrete
40 N/mm²
TE-CX
TE 7 (02)
DRS-M
89 dB (A)
100 dB (A)
11 m/s2
1.5 m/s2
25 min.
100 min.
concrete
40 N/mm²
TE-C3X
TE 7-C (01)
DRS-M
89 dB (A)
100 dB (A)
17 m/s2
1.5 m/s2
10 min.
42 min.
concrete
40 N/mm²
TE-CX
TE 16 (all types) (01)
DRS-S
89 dB (A)
100 dB (A)
16.5 m/s2
1.5 m/s2
11 min.
44 min.
concrete
40 N/mm²
TE-CX
TE 30-A36 (02)
DRS-S
94 dB (A)
105 dB (A)
11 m/s2
1.5 m/s2
25 min.
100 min.
concrete
40 N/mm²
TE-CX
Hole depth 50mm
6
8
133
(532)
0.8
116
(464)
0.9
171
163
(684)
(662)
0.6
0.6
247
(988)
0.4
103
(412)
1.0
107
(428)
0.9
123
(492)
0.8
210
(840)
0.48
10
56
(224)
1.8
49
(196)
2.0
73
(292)
1.4
111
(444)
0.9
84
(336)
1.2
52
(208)
1.9
63
(252)
1.6
152
(608)
0.66
12
41
(164)
2.4
39
(156)
2.6
61
(244)
1.6
79
(316)
1.3
45
(180)
2.2
60
(240)
1.7
157
(628)
0.64
14
Hole depth 100mm
16
18
73
(292)
1.4
56
(224)
1.8
34
(136)
2.9
28
(112)
3.6
40
(160)
2.5
125
(500)
0.80
18
(72)
5.6
20
25
28
14
(56)
7.1
19
(76)
5.3
73
(292)
1.37
42
(168)
2.38
19
(76)
5.26
How to read the Tool Selector.
Drilling
The number of holes that can be drilled for a particular tool and given diameter, depth, workpiece material and consumable in a working day before the EAV and ELV (shown in brackets) are given in the productivity data section. The red value is the number of HSE points per hole for the given
tool and application.
www.hilti.com
2/32
Combihammers
Tool
Dust
removal
available
Emission
sound
pressure
level*
Basic tool data
Emission
Triaxial
sound
vibration
power
value*
level*
TE 30 (01)
DRS-S
90 dB (A)
101 dB (A)
16.5 m/s
TE 30-AVR (01)
DRS-S
90 dB (A)
101 dB (A)
TE 30-C-AVR (01)
DRS-S
90 dB (A)
TE 30-M-AVR (01)
DRS-S
TE 40 (01)
Uncertainty
K
Time
to EAV
Time
to ELV
Work
piece
material
2
11 min.
44 min.
concrete
40 N/mm²
TE-CX,
TE-C3X
12 m/s2
1.5 m/s2
21 min.
84 min.
concrete
40 N/mm²
TE-CX,
TE-C3X
100 dB (A)
12 m/s2
1.5 m/s2
21 min.
84 min.
concrete
40 N/mm²
TE-CX,
TE-C3X
90 dB (A)
101 dB (A)
12 m/s2
1.5 m/s2
21 min.
84 min.
concrete
40 N/mm²
TE-CX,
TE-C3X
DRS-S
93 dB (A)
104 dB (A)
16.3 m/s2
1.5 m/s2
11 min.
45 min.
concrete
40 N/mm²
TE-CX
TE 40-AVR (01)
DRS-S
94 dB (A)
105 dB (A)
10.7 m/s2
1.5 m/s2
26 min.
105 min.
concrete
40 N/mm²
TE-CX
TE 50 (02)
DRS-S
95 dB (A)
106 dB (A)
16.1 m/s2
1.5 m/s2
12 min.
46 min.
concrete
40 N/mm²
TE-YX
TE 50-AVR (02)
DRS-S
93 dB (A)
104 dB (A)
11.4 m/s2
1.5 m/s2
23 min.
92 min.
concrete
40 N/mm²
TE-YX
42 min.
concrete
40 N/mm²
TE-YX
Productivity data
HSE points per hole
Hole depth 100mm
Consumable
8
TE 56 (01)
DRS-S
92 dB (A)
103 dB (A)
2
17 m/s2
1.5 m/s
1.5 m/s2
10 min.
10
60
(240)
1.7
114
(456)
0.9
114
(456)
0.9
114
(456)
0.9
12
61
(244)
1.6
116
(464)
0.8
116
(464)
0.9
116
(464)
0.9
14
16
41
(164)
2.4
78
(312)
1.2
78
(312)
1.3
78
(312)
1.3
52
(208)
1.9
121
(484)
0.8
50
(200)
2.0
99
(396)
1.0
47
(188)
2.1
18
20
19
(76)
5.3
36
(144)
2.7
36
(144)
2.8
36
(144)
2.8
29
(116)
3.4
67
(268)
1.5
29
(116)
3.4
57
(228)
1.8
29
(116)
3.4
22
24
20
(80)
5.0
46
(184)
2.2
22
(88)
4.5
44
(176)
2.3
22
(88)
4.5
25
26
28
30
17
(68)
5.9
12
(48)
8.3
24
(96)
4.2
13
(52)
7.7
38
40
10
(40)
10.0
10
(40)
10.0
7
(28)
14.3
7
(28)
14.3
40
(160)
2.5
20
(80)
5.0
40
(160)
2.5
Basic tool data
Tool
Dust
removal
available
Emission
sound
pressure
level*
Emission
sound
power
level*
TE 56-ATC (01)
DRS-S
92 dB (A)
103 dB (A)
16 m/s
TE 60-T-ATC (02)
DRS-S
99 dB (A)
110 dB (A)
9 m/s2
Productivity data
Triaxial
vibration
value*
Uncertainty
K
Time
to EAV
Time
to ELV
Work
piece
material
Consumable
2
12 min.
47 min.
concrete
40 N/mm²
TE-YX
1.5 m/s2
37 min.
148 min.
concrete
40 N/mm²
TE-YX
TE-YX
16
2
1.5 m/s
TE 60-ATC (03)
DRS-S
101 dB (A)
112 dB (A)
11 m/s2
1.5 m/s2
25 min.
100 min.
concrete
40 N/mm²
TE 60-ATC-AVR (03)
DRS-S
101 dB (A)
112 dB (A)
7.5 m/s2
1.5 m/s2
53 min.
212 min.
concrete
40 N/mm²
TE-YX
TE-YX
TE-YX
TE 70 (02)
DRS-B
99 dB (A)
110 dB (A)
22 m/s2
1.5 m/s2
6 min.
25 min.
concrete
40 N/mm²
TE 70-ATC (02)
DRS-B
99.5 dB (A)
110.5 dB (A)
22 m/s2
1.5 m/s2
6 min.
25 min.
concrete
40 N/mm²
TE 70-AVR (03)
concrete
DRS-B
102 dB (A)
113 dB (A)
30 min.
120 min.
TE-YX
TE 70-D/AVR (03)
10 m/s2
1.5 m/s2
40 N/mm²
TE 70-ATC/AVR (03)
www.hilti.com
140
(560)
0.7
18
120
(480)
0.8
20
33
(132)
3.0
113
(452)
0.9
76
(304)
1.32
185
(740)
0.5
125
(500)
0.8
22
25
(100)
4.0
25
(100)
4.0
120
(480)
0.8
24
25
(100)
4.0
HSE points per hole
Hole depth 100mm
25
26
28
30
20
14
(80)
(56)
5.0
7.1
82
56
(328)
(224)
1.2
1.8
69
(276)
1.45
150
(600)
0.7
21
18
(84)
(72)
4.8
5.6
21
18
(84)
(72)
4.8
5.6
105
90
(420)
(360)
1.0
1.1
32
42
(168)
2.38
94
(376)
1.1
15
(60)
6.7
15
(60)
6.7
65
(260)
1.5
37
50
(200)
2.0
3/32
Combihammers
Basic tool data
Tool
Dust
removal
available
Emission
sound
pressure
level*
Emission
sound
power
level*
TE 76 (01)
DRS-B
91 dB (A)
102 dB (A)
17 m/s
TE 76P-ATC (01) DRS-B
91 dB (A)
102 dB (A)
99.5 dB (A)
Productivity data
Triaxial
vibration
value*
Uncertainty
K
Time
to EAV
Time
to ELV
Work
Consumable
piece
material
2
10 min.
42 min.
concrete
40 N/mm²
TE-YX
15 m/s2
1.5 m/s2
13 min.
53 min.
concrete
40 N/mm²
TE-YX
110.5 dB (A) 8.8 m/s2
1.5 m/s2
39 min.
155 min.
concrete
40 N/mm²
TE-YX
16
TE 80-ATC (01)
DRS-B
2
1.5 m/s
250
(1000)
0.4
TE 80-ATC/AVR
DRS-B
(03)
www.hilti.com
102 dB (A)
113 dB (A)
7.5 m/s2
1.5 m/s2
53 min.
212 min.
concrete
40 N/mm²
TE-YX
18
210
(840)
0.5
20
22
220
(880)
0.5
171
(684)
0.6
212
(848)
0.5
24
29
(116)
3.4
37
(148)
2.7
HSE points per hole
Hole depth 100mm
25
26
28
30
21
(84)
4.8
26
(104)
3.8
144
131
109
(576)
(524)
(436)
0.7
0.8
0.9
185
165
(740)
(660)
0.5
0.6
32
17
(68)
5.9
22
(88)
4.5
93
(372)
1.1
115
(460)
0.9
36
37
70
(280)
1.4
92
(368)
1.1
38
13
(52)
7.7
16
(64)
6.3
40
53
(212)
1.9
75
(300)
1.3
4/32
Combihammers (chiseling to wall)
Basic tool data
Emission
Emission
Triaxial
Uncertainty K
Time
Time
sound
sound
vibration
to EAV
to ELV
pressure
power
value*
level*
level*
11 m/s2
1.5 m/s2
TE 30-C-AVR (01)
no
90 dB (A)
111 dB (A)
25 min.
100 min.
11 m/s2
1.5 m/s2
TE 30-M-AVR (01)
no
90 dB (A)
111 dB (A)
25 min.
100 min.
2
2
13 m/s
1.5 m/s
TE 56 / TE 56-ATC (01)
DRS-B
92 dB (A)
103 dB (A)
18 min.
71 min.
14 m/s2
1.5 m/s2
TE 60 (02)
DRS-B
96 dB (A)
107 dB (A)
15 min.
61 min.
15.5 m/s2
1.5 m/s2
TE 60 (03)
no
96 dB (A)
107 dB (A)
12 min.
48 min.
2
2
8.5 m/s
1.5 m/s
TE 60-T-ATC (02)
DRS-B
99 dB (A)
110 dB (A)
42 min.
168 min.
10.5 m/s2
1.5 m/s2
TE 60-ATC (03)
DRS-BK
101 dB (A)
112 dB (A)
27 min.
108 min.
7 m/s2
1.5 m/s2
TE 60-ATC-AVR (03)
DRS-BK
101 dB (A)
112 dB (A)
61 min.
244 min.
2
2
18 m/s
1.5 m/s
TE 70 (02)
DRS-B
99 dB (A)
110 dB (A)
9 min.
37 min.
15 m/s2
1.5 m/s2
TE 76 (01)
DRS-B
91 dB (A)
102 dB (A)
13 min.
53 min.
8.5 m/s2
1.5 m/s2
TE 80-ATC (01)
DRS-B
99.5 dB (A)
110.5 dB (A)
42 min.
166 min.
Tool
Dust
removal
available
Work piece
material
Consumable
concrete 40 N/mm²
concrete 40 N/mm²
concrete 40 N/mm²
concrete 40 N/mm²
concrete 40 N/mm²
concrete 40 N/mm²
concrete 40 N/mm²
concrete 40 N/mm²
concrete 40 N/mm²
concrete 40 N/mm²
concrete 40 N/mm²
TE-CP-SM 25
TE-CP-SM 25
TE-YP-SM 28
TE-YP-SM 28
TE-YP-SM 28
TE-YP-SM 28
TE-YP-SM 28
TE-YP-SM 28
TE-YP-SM 28
TE-YP-SM 28
TE-YP-SM 28
Work piece
material
Consumable
concrete 40 N/mm²
TE-CP SM 18
Work piece
material
Consumable
concrete 40 N/mm²
concrete 40 N/mm²
concrete 40 N/mm²
concrete 40 N/mm²
concrete 40 N/mm²
concrete 40 N/mm²
concrete 40 N/mm²
TE-CP-SM 25
TE-YP-SM 28
TE-YP-SM 28
TE-YP-SM 28
TE-YP-SM 28
TE-YP-SM 28
TE-YP-SM 28
Work piece
material
Consumable
concrete 40 N/mm²
concrete 40 N/mm²
concrete 40 N/mm²
concrete 40 N/mm²
concrete 40 N/mm²
TE-SP-SM 36
TE-SP-SM 36
TE-SP-SM 36
TE-SP-SM 36
TE Hex 28
Productivity data
Volume till EAV
(liter)
7
7
14.9
12.9
11.5
34
25
56.3
11.9
14.7
56.5
Volume till ELV
(liter)
28
28
59
51
46
136
100
225
47
58
225
HSE
Points
14.3
14.3
6.7
7.8
8.7
2.9
4.0
1.8
8.4
6.8
1.8
Rotary hammer (chiseling to wall)
Tool
Dust
removal
available
TE 30-A36 (02)
no
Emission
sound
pressure
level*
88 dB (A)
Basic tool data
Emission
sound
power
level*
99 dB (A)
Triaxial
vibration
value*
Uncertainty K
Time
to EAV
Time
to ELV
9 m/s2
1.5 m/s2
37 min.
148 min.
Productivity data
Volume till EAV
(liter)
15.9
Volume till ELV
(liter)
63.6
HSE
Points
6.3
Breakers (chiseling to wall)
Basic tool data
Emission
Emission
Triaxial
Uncertainty K
Time
Time
sound
sound
vibration
to EAV
to ELV
pressure
power
value*
level*
level*
14 m/s2
1.5 m/s2
TE 106 (01)
DRS-B
90 dB (A)
101 dB (A)
15 min.
61 min.
13.5 m/s2
1.5 m/s2
TE 300-AVR (01)
DRS-B
91 dB (A)
102 dB (A)
16 min.
64 min.
2
2
12.1
m/s
1.5
m/s
TE 500 (01)
DRS-B
94 dB (A)
105 dB (A)
20 min.
82 min.
10.1 m/s2
1.5 m/s2
TE 500-AVR (01)
DRS-B
94 dB (A)
105 dB (A)
29 min.
118 min.
6.5 m/s2
1.5 m/s2
TE 700-AVR (01)
DRS-B
86 dB (A)
97 dB (A)
71 min.
284 min.
9 m/s2
1.5 m/s2
TE 706 (01)
DRS-B
90 dB (A)
101 dB (A)
37 min.
148 min.
5.5 m/s2
1.5 m/s2
TE 706-AVR (01)
DRS-B
87 dB (A)
98 dB (A)
99 min.
397 min.
Tool
Dust
removal
available
Productivity data
Volume till EAV
(liter)
4.1
5
22.1
31.8
60
41.5
111.1
Volume till ELV
(liter)
16
20
88
127
240
165
444
HSE
Points
24.4
20.0
4.5
3.1
1.7
2.4
0.9
Breakers (demolition on floor edge)
Basic tool data
Emission
Emission
Triaxial
Uncertainty K
Time
Time
sound
sound
vibration
to EAV
to ELV
pressure
power
value*
level*
level*
15 m/s2
1.5 m/s2
TE 805 (01)
DRS-B
90 dB (A)
101 dB (A)
13 min.
53 min.
8.5 m/s2
1.5 m/s2
TE 905-AVR (01)
DRS-B
92 dB (A)
103 dB (A)
42 min.
166 min.
2
6.5 m/s
1.5 m/s2
TE 1000-AVR (01)
DRS-B
87 dB (A)
98 dB (A)
71 min.
284 min.
12 m/s2
1.5 m/s2
TE 1500-AVR (01)
DRS-B
89 dB (A)
100 dB (A)
21 min.
84 min.
7 m/s2
1.5 m/s2
TE 3000-AVR (01)
no
94 dB (A)
105 dB (A)
61 min.
244 min.
Tool
Dust
removal
available
Productivity data
Volume till EAV
(liter)
44.4
139.8
325
145
2075
Volume till ELV
(liter)
177
559
1300
580
8300
HSE
Points
2.3
0.7
0.3
0.7
0.0
How to read the Tool Selector.
Breaking
The volume of material that can be broken for a particular tool and given workpiece material and consumable in a working day before the EAV and ELV (shown in brackets) are given in the productivity data section. The red value is the number of HSE points per litre for the given
tool and application.
www.hilti.com
5/32
Cordless drilling in steel
(Drill drivers, hammer drills/drivers, compact drill drivers)
Tool
Dust
removal
system
Emission
sound
pressure level
LpA*
Basic tool data
Emission
Triaxial
sound
vibration
power
value ahv*
level*
SF 14-A (01)
no
75 dB(A)
86 dB(A)
2 m/s²
1.5 m/s
SF 22-A (01)
no
75 dB(A)
86 dB(A)
SFH 22-A (01)
no
75 dB(A)
SFC 14-A (01)
no
SFC 22-A (01)
no
Uncertainty K
Time to
EAV
Time to
ELV
Work piece
material
Consumable
2
750 min.
3000 min.
mild steel
HSS Spiral drill 6,0x93
2 m/s²
1.5 m/s2
750 min.
3000 min.
mild steel
86 dB(A)
2 m/s²
1.5 m/s2
750 min.
3000 min.
mild steel
69 dB(A)
80 dB(A)
2 m/s²
1.5 m/s2
750 min.
3000 min.
mild steel
69 dB(A)
80 dB(A)
2 m/s²
1.5 m/s2
750 min.
3000 min.
mild steel
1
11500
(46000)
0.01
7680
(30720)
0.01
8300
(33200)
0.01
12900
(51600)
0.01
22200
(88800)
0.00
2
5700
(22800)
0.02
3840
(15360)
0.03
4100
(16400)
0.02
6400
(25600)
0.02
11100
(44400)
0.01
3
3800
(15200)
0.03
2560
(10240)
0.04
2700
(10800)
0.04
4300
(17200)
0.02
7400
(29600)
0.01
Productivity data
Number of holes to EAV 2.5 m/s² (ELV 5 m/s2)
HSE Points per hole
sheet steel thickness (mm)
one-step drilling
4
5
6
7
2800
2300
1900
1600
(11200)
(9200)
(7600)
(6400)
0.04
0.04
0.05
0.06
1920
1530
1280
1090
(7680)
(6120)
(5120)
(4360)
0.05
0.07
0.08
0.09
2000
1600
1300
1100
(8000)
(6400)
(5200)
(4400)
0.05
0.06
0.08
0.09
3200
2500
2100
1800
(12800)
(10000)
(8400)
(7200)
0.03
0.04
0.05
0.06
5500
4400
3700
3100
(22000)
(17600)
(14800)
(12400)
0.02
0.02
0.03
0.03
8
1400
(5600)
0.07
960
(3840)
0.10
1000
(4000)
0.10
1600
(6400)
0.06
2700
(10800)
0.04
9
1200
(4800)
0.08
850
(3400)
0.12
900
(3600)
0.11
1400
(5600)
0.07
2400
(9600)
0.04
10
1100
(4400)
0.09
760
(3040)
0.13
800
(3200)
0.12
1300
(5200)
0.08
2200
(8800)
0.04
www.hilti.com
6/32
Cordless drilling in steel
Electric drill driver
Tool
Dust
removal
system
Basic tool data
Emission
Emission sound
Triaxial vibration Uncertainty k
Sound
power level*
value ahv*
pressure Level
LpA*
Time to EAV Time to ELV
Work piece
material
Consumable
HSS Spiral drill
6,0x93
HSS Spiral drill
5,0x86
UD 30 (01)
no
86 dB(A)
97 dB(A)
6 m/s²
1.5 m/s2
83 min.
332 min.
mild steel
HSS Spiral drill
4,0x75
HSS Spiral drill
3,0x61
1
3010
(12040)
0.03
3610
(14440)
0.03
4510
(18040)
0.02
6020
(24080)
0.02
2
1500
(6000)
0.07
1800
(7200)
0.05
2250
(9000)
0.04
3010
(12040)
0.03
Productivity data
HSE Points per hole
one-step drilling
3
4
5
6
7
1000
750
600
500
430
(4000)
(3000)
(2400)
(2000)
(1480)
0.10
0.13
0.17
0.20
0.23
1200
900
720
600
510
(4800)
(3600)
(2880)
(2400)
(2040)
0.08
0.11
0.14
0.17
0.20
1500
1120
900
750
640
(6000)
(4480)
(3600)
(3000)
(2560)
0.07
0.09
0.11
0.13
0.16
2000
1500
1200
1000
860
(8000)
(6000)
(4800)
(4000)
(3440)
0.05
0.07
0.08
0.1
0.12
8
370
(1480)
0.27
450
(1800)
0.22
560
(2240)
0.18
750
(3000)
0.13
9
330
(1320)
0.30
400
(1600)
0.25
500
(2000)
0.2
660
(2640)
0.15
10
300
(1200)
0.33
360
(1440)
0.28
450
(1800)
0.22
600
(2400)
0.17
8
380
(1520)
0.26
910
(3640)
0.11
370
(1480)
0.27
880
(3520)
0.11
1060
(4240)
0.09
1330
(5320)
0.08
1770
(7080)
0.06
9
340
(1360)
0.29
810
(3240)
0.12
330
(1320)
0.30
790
(3160)
0.13
940
(3760)
0.11
1180
(4720)
0.08
1580
(6320)
0.06
10
300
(1200)
0.33
730
(2920)
0.14
300
(1200)
0.33
710
(2840)
0.14
850
(3400)
0.12
1060
(4240)
0.09
1420
(5680)
0.07
Rotary Hammers
Basic tool data
Emission sound
Triaxial vibration Uncertainty K
power level*
value ahv*
Productivity data
Tool
Dust
removal
system
Emission
sound
pressure level
LpA*
TE 4-A22 (01)
no
n.a.
n.a.
5.5 m/s²
1.5 m/s2
99 min.
396 min.
mild steel
HSS Spiral drill
6,0x93
TE 6-A36-AVR (03)
no
n.a.
n.a.
2.5 m/s²
1.5 m/s2
480 min.
1920 min.
mild steel
HSS Spiral drill
6,0x93
TE 2-M (02)
no
n.a.
n.a.
4.5 m/s²
1.5 m/s2
148 min.
592 min.
mild steel
HSS Spiral drill
6,0x93
mild steel
HSS Spiral drill
6,0x93
mild steel
HSS Spiral drill
5,0 x 86
mild steel
HSS Spiral drill
4,0 x 75
mild steel
HSS Spiral drill
3,0 x 61
TE 30-A36 (02)
no
n.a.
n.a.
3 m/s²
1.5 m/s2
333 min.
Work piece
material
Consumable
1332 min.
1
3070
(12280)
0.03
7320
(29280)
0.01
3030
(12120)
0.03
7110
(28440)
0.01
8540
(34160)
0.01
10670
(42680)
0.01
14230
(56920)
0.01
2
1530
(6120)
0.07
3660
(14640)
0.03
1510
(6040)
0.07
3550
(14200)
0.03
4270
(17080)
0.02
5330
(21320)
0.02
7110
(28440)
0.01
3
1020
(4080)
0.10
2440
(9760)
0.04
1010
(4040)
0.10
2370
(9480)
0.04
2840
(11360)
0.04
3550
(14200)
0.03
4740
(18960)
0.02
HSE Points per hole
one-step drilling
4
5
6
7
760
610
510
430
(3040)
(2440)
(2040)
(1720)
0.13
0.16
0.20
0.23
1830
1460
1220
1040
(7320)
(5840)
(4880)
(4160)
0.05
0.07
0.08
0.10
750
600
500
430
(3000)
(2400)
(2000)
(1720)
0.13
0.17
0.20
0.23
1770
1420
1180
1010
(7080)
(5680)
(4720)
(4040)
0.06
0.07
0.08
0.10
2130
1700
1420
1220
(8520)
(6800)
(5680)
(4880)
0.05
0.06
0.07
0.08
2660
2130
1770
1520
(10640)
(8520)
(7080)
(6080)
0.04
0.05
0.06
0.07
3550
2840
2370
2030
(14200)
(11360)
(9480)
(8120)
0.03
0.04
0.04
0.05
www.hilti.com
7/32
Rotary Hammers
Tool
Dust
removal
system
Emission
sound
pressure level
LpA*
Basic tool data
Emission sound
Triaxial vibration Uncertainty K
power level*
value ahv*
Productivity data
Time to EAV
Time to ELV
Work piece
material
Consumable
HSS Spiral drill 12,0 x 151
TE 4-A22 (01)
no
n.a.
n.a.
5.5 m/s²
1.5 m/s2
99 min.
396 min.
mild steel
HSS Spiral drill
9,0 x 125
HSS Spiral drill
8,0 x 117
TE 6-A36-AVR (03)
no
n.a.
n.a.
2.5 m/s²
1.5 m/s2
480 min.
1920 min.
mild steel
HSS Spiral drill
9,0 x 125
HSS Spiral drill
8,0 x 117
TE 2-M (02)
no
n.a.
n.a.
4.5 m/s²
1.5 m/s2
148 min.
592 min.
mild steel
HSS Spiral drill
9,0 x 125
HSS Spiral drill
8,0 x 117
TE 30-A36 (02)
no
n.a.
n.a.
3 m/s²
1.5 m/s2
333 min.
1332 min.
mild steel
HSS Spiral drill
9,0 x 125
HSS Spiral drill
8,0 x 117
3
270
(1080)
0.37
290
(1160)
0.34
320
(1280)
0.31
360
(1440)
0.28
410
(1640)
0.24
550
(2200)
0.18
600
(2400)
0.17
660
(2640)
0.15
740
(2960)
0.14
830
(3320)
0.12
80
(320)
1.25
90
(360)
1.11
100
(400)
1.00
110
(440)
0.91
120
(480)
0.83
430
(1720)
0.23
470
(1880)
0.21
520
(2080)
0.19
580
(2320)
0.17
650
(2600)
0.15
4
200
(800)
0.50
220
(880)
0.45
240
(960)
0.42
270
(1080)
0.37
300
(1200)
0.33
410
(1640)
0.24
450
(1800)
0.22
500
(2000)
0.20
550
(2200)
0.18
620
(2480)
0.16
60
(240)
1.67
60
(240)
1.67
70
(280)
1.43
80
(320)
1.25
90
(360)
1.11
320
(1280)
0.31
350
(1400)
0.29
390
(1560)
0.26
430
(1720)
0.23
490
(1960)
0.20
HSE Points per hole
pre drilling (6mm pre-hole)
5
6
7
8
160
130
110
100
(640)
(520)
(440)
(400)
0.63
0.77
0.91
1.00
170
140
120
110
(680)
(560)
(480)
(440)
0.59
0.71
0.83
0.91
190
160
140
120
(760)
(640)
(560)
(480)
0.53
0.63
0.71
0.83
210
180
150
130
(840)
(720)
(600)
(520)
0.48
0.56
0.67
0.77
240
200
170
150
(960)
(800)
(680)
(600)
0.42
0.50
0.59
0.67
330
270
230
200
(1320)
(1080)
(920)
(800)
0.30
0.37
0.43
0.50
360
300
260
220
(1440)
(1200)
(1040)
(880)
0.28
0.33
0.38
0.45
400
330
280
250
(1600)
(1320)
(1120)
(1000)
0.25
0.30
0.36
0.40
440
370
310
270
(1760)
(1480)
(1240)
(1080)
0.23
0.27
0.32
0.37
500
410
350
310
(2000)
(1640)
(1400)
(1240)
0.20
0.24
0.29
0.32
50
40
30
30
(200)
(160)
(120)
(120)
2.00
2.50
3.33
3.33
50
40
30
30
(200)
(160)
(120)
(120)
2.00
2.50
3.33
3.33
60
50
40
30
(240)
(200)
(160)
(120)
1.67
2.00
2.50
3.33
60
50
40
40
(240)
(200)
(160)
(160)
1.67
2.00
2.50
2.50
70
60
50
40
(280)
(240)
(200)
(160)
1.43
1.67
2.00
2.50
260
210
180
160
(1040)
(840)
(720)
(640)
0.38
0.48
0.56
0.63
280
230
200
170
(1120)
(920)
(800)
(680)
0.36
0.43
0.50
0.59
310
260
220
190
(1240)
(1040)
(880)
(760)
0.32
0.38
0.45
0.53
340
290
240
210
(1360)
(1160)
(960)
(840)
0.29
0.34
0.42
0.48
390
320
280
240
(1560)
(1280)
(1120)
(960)
0.26
0.31
0.36
0.42
9
90
(360)
1.11
90
(360)
1.11
100
(400)
1.00
120
(480)
0.83
130
(520)
0.77
180
(720)
0.56
200
(800)
0.50
220
(880)
0.45
240
(960)
0.42
270
(1080)
0.37
20
(80)
5.00
30
(120)
3.33
30
(120)
3.33
30
(120)
3.33
40
(160)
2.50
140
(560)
0.71
150
(600)
0.67
170
(680)
0.59
190
(760)
0.53
210
(840)
0.48
10
80
(320)
1.25
80
(320)
1.25
90
(360)
1.11
100
(400)
1.00
120
(480)
0.83
160
(640)
0.63
180
(720)
0.56
200
(800)
0.50
220
(880)
0.45
250
(1000)
0.40
20
(80)
5.00
20
(80)
5.00
30
(120)
3.33
30
(120)
3.33
30
(120)
3.33
130
(520)
0.77
140
(560)
0.71
150
(600)
0.67
170
(680)
0.59
190
(760)
0.53
www.hilti.com
8/32
Rotary Hammers
Tool
Dust
removal
system
Emission
Emission
Triaxial
Uncertainty K
sound
sound power vibration value
pressure level level*
ahv*
LpA*
TE 4-A22 (01)
no
n.a.
n.a.
5.5 m/s²
1.5 m/s
TE 6-A36-AVR (03)
no
n.a.
n.a.
2.5 m/s²
TE 2-M (02)
no
n.a.
n.a.
TE 30-A36 (02)
no
n.a.
n.a.
2
Work piece
material
Consumable
HSE Points per hole
consumable diameter
metal hole saw in mm
99 min.
396 min.
2 mm mild steel
Metal Hole Saw
1.5 m/s2
480 min.
1920 min.
2 mm mild steel
Metal Hole Saw
4.5 m/s²
1.5 m/s2
148 min.
592 min.
2 mm mild steel
Metal Hole Saw
3 m/s²
1.5 m/s2
333 min.
1332 min.
2 mm mild steel
Metal Hole Saw
25
180
(720)
0.56
290
(1160)
0.34
90
(360)
1.11
32
180
(720)
0.56
290
(1160)
0.34
90
(360)
1.11
510
(2040)
0.20
40
110
(440)
0.91
180
(720)
0.56
80
(320)
1.25
51
110
(440)
0.91
180
(720)
0.56
80
(320)
1.25
290
(1160)
0.34
www.hilti.com
9/32
Drilling in concrete (Cordless drill/drivers)
Tool
Dust
removal
system
no
Basic tool data
Emission
Emission sound Triaxial
Uncertainty K
Sound
power level*
vibration value
pressure Level
ahv*
LpA*
96 dB(A)
107 dB(A)
20 m/s²
Productivity data
Time to EAV
Time to ELV
Work piece material
Consumable
Hole depth: 50 mm
Drilling diameter: 8 mm
1.5 m/s2
8 min.
2
8 min.
32 min.
Screed concrete
Masonry bit
SFH 22-A (01)
no
no
96 dB(A)
91 dB(A)
107 dB(A)
102 dB(A)
20 m/s²
1.5 m/s
12 m/s²
1.5 m/s2
1.5 m/s
2
1.5 m/s
2
21 min.
Sand-lime stone
(density 2.0)
32 min.
Masonry bit
84 min.
Screed concrete
21 min.
84 min.
Sand-lime stone
(density 2.0)
Masonry bit
22 min.
88 min.
Screed concrete
Masonry bit
88 min.
Sand-lime stone
(density 2.0)
Masonry bit
SFH 144-A (01)
no
91 dB(A)
102 dB(A)
12 m/s²
no
93 dB(A)
104 dB(A)
11.8 m/s²
SFH 151-A (01)
no
93 dB(A)
104 dB(A)
11.8 m/s²
1.5 m/s2
1.5 m/s
2
17 min.
68 min.
Screed concrete
Masonry bit
1.5 m/s
2
17 min.
68 min.
Sand-lime stone
(density 2.0)
Masonry bit
Work piece material
Consumable
no
91 dB(A)
102 dB(A)
13.1 m/s²
no
91 dB(A)
102 dB(A)
13.1 m/s²
Number of holes to EAV 2.5 m/s² (ELV 5.0 m/s2)
HSE points per hole
22 min.
Masonry bit
SFH 181-A (01)
80 mm
10 mm
90 mm
12 mm
300 (1200)
150 (600)
95 (380)
0.3
0.7
1.1
360 (1440)
140 (560)
80 (320)
0.3
0.7
1.3
330 (1320)
140 (560)
110 (440)
0.3
0.7
0.9
270 (1080)
110 (440)
55 (220)
0.4
0.9
1.8
250 (1000)
140 (560)
70 (280)
0.4
0.7
1.4
330 (1320)
135 (540)
70 (280)
0.3
0.7
1.4
260 (1040)
140 (560)
90 (360)
0.4
0.7
1.1
500 (2000)
180 (720)
90 (360)
0.2
0.6
1.1
Drilling in concrete (Universal hammers)
Tool
Dust
removal
system
no
Basic tool data
Emission
Sound
power level*
vibration value
pressure Level
ahv*
LpA*
93 dB(A)
104 dB(A)
13.9 m/s²
Productivity data
Uncertainty k
Time to EAV
Time to ELV
Hole depth: 50 mm
Drilling diameter: 8 mm
1.5 m/s2
16 min.
1.5 m/s
2
16 min.
64 min.
Sand-lime stone
(density 2.0)
Masonry bit
2
15 min.
60 min.
Screed concrete
Masonry bit
15 min.
60 min.
Sand-lime stone
(density 2.0)
Masonry bit
64 min.
Screed concrete
Masonry bit
UH 240-A (01)
no
93 dB(A)
104 dB(A)
13.9 m/s²
Number of holes to EAV 2.5 m/s² (ELV 5.0 m/s2)
HSE points per hole
no
96 dB(A)
107 dB(A)
14 m/s²
1.5 m/s
no
96 dB(A)
107 dB(A)
14 m/s²
1.5 m/s2
UH 650 (01)
80 mm
10 mm
90 mm
12 mm
210 (840)
150 (600)
120 (480)
0.5
0.7
0.8
370 (1480)
170 (680)
85 (340)
0.3
0.6
1.2
260 (1040)
140 (560)
70 (280)
0.4
0.7
1.4
280 (1120)
115 (460)
45 (180)
0.4
0.9
2.2
www.hilti.com
10/32
Impact Fastening
Impact drivers/wrenches
Uncertainty k
Time to EAV
Time to ELV
95 dB(A)
106 dB(A)
8.4 m/s²
1.5 m/s2
43 min.
94 dB(A)
83 dB(A)
7.5 m/s²
1.5 m/s2
53 min.
7.5 m/s²
1.5 m/s2
11 m/s²
Dust removal
system
Emission sound
pressure level
LpA*
SI 100 (01)
no
SID/SIW 14-A (01)
no
SID/SIW 22-A (01)
no
86 dB(A)
97 dB(A)
SID/SIW 121-A (01)
no
85 dB(A)
96 dB(A)
SID/SIW 144-A (01)
no
93 dB(A)
104 dB(A)
SIW 22T-A (01)
no
Productivity data
Basic tool data
Emission sound
Triaxial vibration
power level*
value ahv*
Tool
97 dB(A)
108 dB(A)
Work piece material
Screw type
Number of screw settings
to EAV 2.5 m/s² (ELV 5
m/s²)
HSE points per
screw setting
172 min.
concrete
212 min.
steel
HUS H 12.5 (10 mm)
635 (2540)
0.2
M12 metal screw
1600 (6400)
53 min.
212 min.
0.1
concrete
HUS H 6 screw (6 mm)
800 (3200)
1.5 m/s2
25 min.
0.1
100 min.
steel
M12 metal screw
740 (2960)
11 m/s²
1.5 m/s2
0.1
25 min.
100 min.
concrete
HUS H 7.5 screw (6 mm)
370 (1480)
7.4 m/s²
0.3
1.5 m/s2
55 min.
220 min.
steel
M12 metal
1600 (6400)
0.1
12 m/s²
1.5 m/s2
21 min.
84 min.
steel
M12 metal
625 (2500)
0.3
12 m/s²
1.5 m/s2
21 min.
84 min.
steel
HUS H 7.5 (6 mm)
300 (1200)
0.3
14.5 m/s²
1.5 m/s2
14 min.
56 min.
steel
M20 metal
420 (1680)
0.2
14.5 m/s²
1.5 m/s2
14 min.
56 min.
concrete
HUS H 10.5 (8 mm)
170 (680)
0.6
14.5 m/s²
1.5 m/s2
14 min.
56 min.
concrete
HUS H 12.5 (10 mm)
110 (440)
0.9
14.5 m/s²
1.5 m/s2
14 min.
56 min.
concrete
HUS H 16.5 (14 mm)
70 (280)
1.4
wood
12 X wood (240 mm)
22 (88)
4.5
Work piece material
Screw type
Number of screw settings
to EAV 2.5 m/s² (ELV 5
m/s²)
HSE points per
screw setting
14.5 m/s²
14 min.
56 min.
1.5 m/s2
Screwdrivers
Tool
Dust removal
system
Emission sound
pressure level
LpA*
TKI 2500 (01)
no
97 dB(A)
ST 1800 (01)
ST 1800-A22 (01)
no
no
84 dB(A)
70 dB(A)
Basic tool data
Emission sound
Triaxial vibration
power level*
value ahv*
108 dB(A)
95 dB(A)
81 dB(A)
Productivity data
Uncertainty k
Time to EAV
Time to ELV
12.3 m/s²
1.5 m/s2
20 min.
80 min.
steel
M10 metal
590 (2360)
0.83
12.3 m/s²
1.5 m/s2
20 min.
80 min.
concrete
HUS H 7.5 (6 mm)
290 (1160)
1.18
2.5 m/s2
1.5 m/s2
480 min.
1920 min.
S-MD 01Z 4,8 x 19
2500 (10000)
0.04
2.5 m/s2
1.5 m/s2
480 min.
1920 min.
1 mm metal sheet
overlap mount 1 mm to 1 mm
S-MD 51Z 4,8 x 19
2100 (8400)
0.05
2.5 m/s2
1.5 m/s2
480 min.
1920 min.
800 (3200)
0.13
2.5 m/s2
1.5 m/s2
480 min.
1920 min.
1 mm metal sheet
mount on 4 mm steel beam
S-MD 03Z 5,5 x 25
S-MD 53Z 5,5 x 25
900 (3600)
0.11
2.5 m/s2
1.5 m/s2
480 min.
1920 min.
S-MD 05Z 5,5 x 40
280 (1120)
0.36
2.5 m/s2
1.5 m/s2
480 min.
1920 min.
1 mm metal sheet
S-MD 55Z 5,5 x 45
330 (1320)
0.30
0.5 m/s2
1.5 m/s2
12000 min.
48000 min.
S-MD 01Z 4.8 x 19
3000 (12000)
0.03
0.5 m/s2
1.5 m/s2
12000 min.
48000 min.
1 mm metal sheet overlap mount 1 mm
to 1 mm
S-MD 51Z 4.8 x 19
5200 (20800)
0.02
0.5 m/s2
1.5 m/s2
12000 min.
48000 min.
S-MD 03Z 5.5 x 25
1500 (6000)
0.07
0.5 m/s2
1.5 m/s2
12000 min.
48000 min.
1 mm metal sheet
S-MD 53Z 5.5 x 25
2700 (10800)
0.04
0.5 m/s2
1.5 m/s2
12000 min.
48000 min.
S-MD 05Z 5.5 x 40
540 (2160)
0.19
0.5 m/s2
1.5 m/s2
12000 min.
48000 min.
1 mm metal sheet
S-MD 55Z 5.5 x 45
800 (3200)
0.13
How to read the selector.
Impact Fastening
The number of screws that can be set for a particular tool and given workpiece material and screw type in a working day before the EAV and ELV (shown in brackets) are given under the productivity data section. The red value is the number of HSE points per hole for the given tool and
application.
www.hilti.com
11/32
Diamond coring tools
Hand-held diamond core drilling with water in non reinforced concrete
Basic tool data
Tool
Dust
Emission sound Emission
Triaxial
Uncertainty K
removal
pressure level sound power vibration value
system
LpA*
level*
ahv*
Productivity data
Time to
EAV
Time to
ELV
Work piece material
Core bit length or
type
8
DD EC 1 (01)
wet
87 dB(A)
10 m/s²
1.5 m/s2
30 min.
120 min.
concrete
40 N/mm²
150 mm
17 m/s²
1.5 m/s2
10 min.
40 min.
concrete
40 N/mm²
300 mm
12
120
(480)
0.8
98 dB(A)
DD 130 (01)
wet
89 dB(A)
100 dB(A)
5 m/s²
1.5 m/s2
120 min.
480 min.
concrete
40 N/mm²
HWC
DD 150-U (01)
wet
87 dB(A)
98 dB(A)
7 m/s²
1.5 m/s2
61 min.
244 min.
concrete
40 N/mm²
HWC 66/350
16
Number of holes to EAV 2.5 m/s2 (ELV 5 m/s2)
for coring diameter [mm]
HSE points per hole
Hole depth 100 mm
18
20
24
110
100
(440)
(400)
0.9
1.0
47
(188)
2.1
90
(360)
1.1
28
35
52
28
(112)
3.6
40
(160)
2.5
30
(120)
3.3
Hand-held dry diamond core drilling into sand-limestone
Basic tool data
Triaxial
Uncertainty K
LpA*
level*
ahv*
Productivity data
Tool
Dust
removal
system
Time to
EAV
Time to
ELV
Work piece material
Core bit length or
type
DD 110-D (01)
dry, vacuum
84 dB(A)
95 dB(A)
5.8 m/s²
1.5 m/s2
89 min.
356 min.
sand-lime stone,
density 2.0
SC HDMU
DD 130 (01)
dry, vacuum
89 dB(A)
100 dB(A)
6 m/s²
1.5 m/s2
83 min.
332 min.
sand-lime stone,
density 2.0
SC HDMU
6.5 m/s²
1.6 m/s2
71 min.
284 min.
sand-lime stone,
density 2.0
DD-B HDMU
DD 150-U (01)
dry, vacuum
87 dB(A)
98 dB(A)
14.5 m/s²
4.5 m/s2
14 min.
56 min.
sand-lime stone,
density 2.0
DD-B PCM
16
18
20
24
HSE points per hole
Hole depth 100 mm
28
35
52
67
68
87
102
112
230
200
(920)
(800)
0.4
0.5
370
170
(1480)
(680)
0.3
0.6
370
170
(1480)
(680)
0.3
0.6
280
(1120)
0.4
122
90
(360)
1.1
100
(400)
1.0
100
(400)
1.0
132
152
162
20
(80)
5.0
30
(120)
3.3
30
(120)
3.3
Hand-held dry diamond socket cutting into sand-limestone
Tool
DD 110-D (01)
DD 130 (01)
Dust
removal
system
dry, vacuum
dry, vacuum
Basic tool data
Triaxial
Uncertainty K
LpA*
level*
ahv*
84 dB(A)
89 dB(A)
Time to
EAV
Time to
ELV
Work piece material
Core bit length or
type
5.8 m/s²
1.5 m/s
2
89 min.
356 min.
sand-lime stone,
density 2.0
SC HDMU
12 m/s²
1.5 m/s2
21 min.
84 min.
sand-lime stone,
density 2.0
SC PCM
6 m/s²
1.5 m/s2
83 min.
332 min.
sand-lime stone,
density 2.0
SC HDMU
11 m/s²
2.5 m/s2
25 min.
100 min.
sand-lime stone,
density 2.0
SC PCM
95 dB(A)
100 dB(A)
Productivity data
HSE points per hole
Hole depth 60 mm
68
82
320
(1280)
0.3
130
(520)
0.8
280
(1120)
0.4
190
(760)
0.5
Diamond coring
The number of holes that can be made for a particular tool given diameter, depth, work piece material and consumable in one working day befopre reaching the EAV and ELV (shown in brackets) are given under the productivity data. The red value is the number of HSE points per hole for the given
application.
www.hilti.com
12/32
Rig based diamond core drilling with water in non reinforced concrete (I)
Tool
Dust
removal
system
Basic tool data
Emission
Emission
Triaxial
sound
sound power vibration
value ahv*
LpA*
Uncertainty K
Work piece material
Core bit length or type
7 m/s²
1.5 m/s2
61 min.
244 min.
concrete
40 N/mm²
DD-C 20/150 T2
11 m/s²
1.5 m/s2
25 min.
100 min.
concrete
40 N/mm²
DD-C 35/300 T2
Productivity data
HSE points per hole
Hole depth 100 mm
12
16
18
20
24
110
(440)
0.9
8
DD EC1(DD-CR1 Rig) (01)
wet
84 dB(A)
97 dB(A)
28
35
65
(260)
1.5
* Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 61029-2-6. Uncertainty (k): noise 3dB.
Rig based diamond core drilling with water in non reinforced concrete (II)
Tool
Dust
removal
system
Basic tool data
Emission
Emission
Triaxial
sound
value ahv*
LpA*
DD 120 (01)
wet
89 dB(A)
102 dB(A)
DD 130-Rig (01)
wet
89 dB(A)
102 dB(A)
Uncertainty K
Work piece material
2.5 m/s²
n.a.
480 min.
1920 min.
concrete
40 N/mm²
DD BI…P2/PU
3.5 m/s²
n.a.
245 min.
980 min.
concrete
40 N/mm²
DD BI…P2/P130
52
170
(680)
0.6
290
(1160)
0.3
67
Productivity data
HSE points per hole
Hole depth 200 mm
68
87
102
112
122
132
130
60
(520)
(240)
0.8
1.7
80
70
(320)
(280)
1.3
1.4
152
40
(160)
2.5
30
(120)
3.3
162
202
www.hilti.com
13/32
Rig based diamond core drilling with water in non reinforced concrete (III)
Tool
Dust
removal
system
Basic tool data
Emission
Emission
Triaxial
sound
value ahv*
LpA
Uncertainty K
Work piece material
35
DD-Bl 102/430 P130
DD 150-U-Rig*** (01)
wet
93 dB(A)
104 dB(A)
3.5 m/s²
1.5 m/s2
245 min.
980 min.
concrete
40 N/mm²
DD-Bl 132/430 P130
Productivity data
HSE points per hole
Hole depth 200 mm
82
102
112
132
152
270
(408)
0.4
95
(380)
1.05
DD-BI 82/430 P
DD 160 (02)
wet
93 dB(A)
106 dB(A)
4 m/s²
1.5 m/s2
188 min.
752 min.
concrete
40 N/mm²
700
(2800)
0.1
270
(1080)
0.4
54
(216)
1.8
DD-BI 152/430 P130
90
(360)
1.1
DD-BI 202/430 P2
DD-BL 112/500 H2
DD 200 (01)
wet
92 dB(A)
105 dB(A)
2.5 m/s²
1.5 m/s
2
480 min.
1920 min.
concrete
40 N/mm²
390
(1560)
0.3
90
(360)
1.1
DD-BL 202/500 H2
DD-BL 112/500 H2
DD 350 (01)
wet
95 dB(A)
108 dB(A)
2.5 m/s²
1.5 m/s
2
480 min.
1920 min.
concrete
40 N/mm²
1100
(4400)
0.1
290
(1160)
0.3
DD-BL 202/500 H2
DD BL 112/500 HX2S
DD 500-Rig** (01)
wet
100 dB(A)
115 dB(A)
4.5 m/s²
1.5 m/s2
148 min.
592 min.
202
105
(420)
0.9
DD-Bl 162/320 PU
DD-BI 35/430 P4
162
concrete
40 N/mm²
DD BL 202/500 HX2S
700
(2800)
0.1
300
(1200)
0.3
** Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 12348. Uncertainty (k) for sound pressure level LpA 4 dB(A). Uncertainty (k) for sound power level 2.5 dB(A).
*** Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 60745
www.hilti.com
14/32
Diamond cutting tools
Cutting
Tool
Dust removal
available
pressure level
sound power
LpA*
level*
value ahv*
DCH 230 (01)
integrated
102.5 dB(A)
113.5 dB(A)
4.7 m/s²
DCH 300 (01)
integrated
106 dB(A)
117 dB(A)
DSH 700 (30 cm/12") (01)
Water
suppression
n/a
n/a
Cutting Wheel
Productivity data
Application & Work piece
Meters till EAV
material
2.5 m/s2
Time to EAV
Time to ELV
Meters till ELV
5 m/s2
HSE Points
1.5 m/s2
136 min.
544 min.
DC-D 230 C1
cutting off 50 mm concrete
pavement slabs
(5 cm x 40 cm slab)
70
280
1.4
5.1 m/s²
1.5 m/s2
115 min.
460 min.
DCH-D 305-C1
pavement slabs
(5 cm x 40 cm slab)
61
244
1.6
5.5 m/s²
n/a
99 min.
396 min.
DC-D 300/3.2/20 C1
pavement slabs
(5 cm x 40 cm slab)
135
540
0.7
Meters till ELV
5 m/s2
HSE Points
* Emission sound pressure level LpA and triaxial vibration value ahv according to EN 60745-2-x (Uncertainty (k): noise 3 dB(A), vibration 1,5 ….2,7 m/s² , depending on tool and application).
Wall chasing / slitting
Tool
DC-SE 20 (01)
DSH 700 30 (01)
DCH 300 (01)
DCH 230 (01)
Dust removal
available
integrated
Water
suppression
integrated
integrated
Basic tool data
pressure level
sound power value ahv*
LpA*
level*
104 dB(A)
99 dB(A)
106 dB(A)
102.5 dB(A)
115 dB(A)
110 dB(A)
117 dB(A)
113.5 dB(A)
4.5 m/s²
4.5 m/s²
8 m/s²
6.5 m/s²
1.5 m/s2
2.4 m/s2
1.5 m/s2
1.5 m/s
2
Time to EAV
148 min.
148 min
115 min.
n/a
Time to ELV
Cutting Wheel
Productivity data
Meters till
material
EAV 2.5 m/s2
DC-D 125-SE M1
wall chasing 30 mm deep in sandlime stone
25.5
101
3.9
DC-D 125-SE C1
wall chasing 30 mm deep in 40
N/mm² concrete
86
344
1.2
DC-D 300/3.2/20 C1
cutting grooves 45 mm deep in
40 N/mm² concrete
60
240
1.7
DC-D 300/3.2/20 C1
sand-lime stone
(density 2.1)
110
440
0.9
DC-D 300/3.2/20 C1
cutting 5 cm x 40 cm concrete
pavement slab
135
540
0.7
DCH-D 305-C1
40 N/mm² concrete
48
192
2.1
DCH-D 305-M1
sand-lime stone
(density 2.0)
32
128
3.1
DCH-D 305-M1
limestone
(density 2.0)
26
104
3.8
DC-D 230 C1
40 N/mm² concrete
58
232
1.7
DC-D 230-M1
sand-lime stone
(density 2.1)
109
436
0.9
592 min.
592 min
460 min.
n/a
* Emission sound pressure level LpA and triaxial vibration value ahv according to EN 60745-2-x (Uncertainty (k): noise 3 dB(A), vibration 1,5 ….2,7 m/s² , depending on tool and application).
www.hilti.com
15/32
Angle grinders
Grinding steel
Tool
Dust
removal
system
Emission sound
pressure level
LpA*
Basic tool data
Emission
sound power
value ahv*
level*
AG 125-S (01)
DC-EX
88 dB(A)
99 dB(A)
DAG 125-S (01)
DEG 125-D (01)
DCG 125-S (01)
DC 230-S (01)
DAG 230-D (01)
DC-EX
DC-EX
DC-EX
DC-EX
DC-EX
87 dB(A)
89 dB(A)
90 dB(A)
92 dB(A)
90 dB(A)
98 dB(A)
100 dB(A)
101 dB(A)
103 dB(A)
101 dB(A)
5.2 m/s²
1.5 m/s2
4.6 m/s²
1.5 m/s
2
1.5 m/s
2
7 m/s²
5.7 m/s²
5.8 m/s²
5 m/s²
1.5 m/s2
1.5 m/s2
1.5 m/s2
111 min.
142 min.
61 min.
92 min.
89 min.
120 min.
Saw blade
material
444 min.
AG-D 125 USP
6,4
grinding 5x5 mm chamfer
(12.5 mm² on mild steel)
568 min.
AG-D 125 USP
6,4
244 min.
AG-D 125 USP
6,4
368 min.
AG-D 125 USP
6,4
356 min.
AG-D 125 USP
6,4
480 min.
AG-D 125 USP
6,4
Saw blade
material
Productivity data
Metres till EAV
2.5 m/s2
Metres till ELV
5 m/s2
HSE Points
21
84
4.8
28
112
3.6
46
184
2.2
50
200
2.0
11
44
9.1
61
244
1.6
Metres till ELV
5 m/s2
HSE Points
* Emission sound pressure level LpA and triaxial vibration value ahv according to EN 60745-2-x (Uncertainty (k): noise 3 dB(A).
Cutting minerals
Tool
DAG 230-D (01)
DCG 230-D (01)
DCG 230-DB (01)
Dust
removal
system
DC-EX
DC-EX
DC-EX
Emission sound
pressure level
LpA*
90 dB(A)
90 dB(A)
90 dB(A)
Basic tool data
Emission
sound power
value ahv*
level*
101 dB(A)
101 dB(A)
101 dB(A)
5 m/s²
5 m/s²
5 m/s²
1.5 m/s
2
1.5 m/s2
1.5 m/s
2
120 min.
120 min.
120 min.
480 min.
480 min.
480 min.
Productivity data
Metres till EAV
2.5 m/s2
DC-D 230-C1
cutting off 50 mm concrete slabs
61
244
1.6
DC-D 230-C2
cutting grooves 30 mm deep in 40
N/mm² concrete
54
216
1.9
DC-D 230-C3
limestone
71
284
1.4
DC-D 230-C4
79
316
1.3
DC-D 230-C5
N/mm² concrete
60
240
1.7
DC-D 230-C6
limestone
117
468
0.9
DC-D 230-C7
70
280
1.4
DC-D 230-C8
N/mm² concrete
80
320
1.3
DC-D 230-C9
limestone
108
432
0.9
* Emission sound pressure level LpA and triaxial vibration value ahv according to EN 60745-2-x (Uncertainty (k): noise 3 dB(A), vibration n.a.
www.hilti.com
16/32
Steel cutting tools
Cutting rebar
Basic tool data
Tool
Dust removal
available
Emission sound
pressure level
LpA*
Emission sound
power level*
Triaxial vibration
value ahv*
Productivity data
Uncertainty K
Time to EAV
Time to ELV
Cutting Wheel
Number of cuts for diamater [mm] to EAV 2.5 m/s2 (ELV 5 m/s2)
HSE Points
10
AG 125-A22 (01)
n/a
83 dB(A)
94 dB(A)
3,8 m/s²
1,5 m/s²
208 min.
832 min.
AC-D 125 Inox USP 1.0mm
AC-D 230 2.5mm USP
DC 230-S (01)
DC-EX 230
92 dB(A)
103 dB(A)
5,8 m/s²
1,5 m/s²
89 min.
356 min.
AC-D 230 1.8mm Inox
AC-D 125 1,5mm Inox USP
DAG 125-S (01)
n/a
n/a
n/a
4,6 m/s²
1,5 m/s²
n/a
n/a
AC-D 125 2,5mm USP
1140
(4560)
0.1
450
(1800)
0.2
AC-D 230 1,8mm Inox
DAG 230-D (01)
DC-EX 230
90 dB(A)
101 dB(A)
5 m/s²
1,5 m/s²
120 min.
480 min.
AC-D 230 2,5mm USP
DCG 125-S (01)
AC-D 125 1,5mm Inox
DC-EX 125
(cut, slit & grind hoods 90 dB(A)
available)
101 dB(A)
DC-EX 230
101 dB(A)
5,7 m/s²
1,5 m/s²
92 min.
368 min.
AC-D 125 2,5mm USP
1490
(5960)
0.07
620
(2480)
0.20
AC-D 230 1,8mm Inox
DCG 230-D (01)
90 dB(A)
5,0 m/s²
1,5 m/s²
120
480
AC-D 230 2,5mm USP
DEG 125-D (01)
DC-EX 125
(cut, slit & grind hoods 89 dB(A)
available)
AC-D 125 1,5mm Inox
100 dB(A)
7 m/s²
1,5 m/s²
61 min.
244 min.
AC-D 125 2,5mm USP
1340
(5360)
0.07
430
(1720)
0.20
12
2240
(8960)
0.04
1860
(7440)
0.05
1950
(7800)
0.05
760
(3040)
0.1
300
(1200)
0.3
3790
(15160)
0.3
3860
(15440)
0.03
1060
(4240)
0.09
410
(1640)
0.2
3400
(13600)
0.02
1480
(5920)
0.06
890
(3560)
0.1
280
(1120)
0.40
15
20
1150
(4600)
0.08
1220
(4880)
0.08
480
(1920)
0.2
190
(760)
0.5
2200
(8800)
0.04
2170
(8680)
0.05
720
(2880)
0.14
260
(1040)
0.3
2080
(8320)
0.04
1550
(6200)
0.06
560
(2240)
0.2
170
(680)
0.60
610
(2440)
0.2
660
(2640)
0.1
260
(1040)
0.4
100
(400)
1.0
1070
(4280)
0.09
1010
(4040)
0.1
430
(1720)
0.2
140
(560)
0.7
1080
(4320)
0.09
840
(3360)
0.12
300
(1200)
0.3
90
(360)
1.10
25
640
(2560)
0.2
380
(1520)
0.3
420
(1680)
0.3
170
(680)
0.6
70
(280)
1.4
640
(2560)
0.2
580
(2320)
0.2
300
(1200)
0.3
90
(360)
1.1
680
(2720)
0.1
540
(2160)
0.20
200
(800)
0.5
60
(240)
1.70
* Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 60745-2-x. Uncertainty (k): noise 3dB
www.hilti.com
17/32
Steel cutting tools
Cutting channel installation systems
Basic tool data
Emission sound Triaxial vibration
power level*
value ahv*
Uncertainty K
Time to EAV
Time to ELV
83 dB(A)
94 dB(A)
3,8 m/s²
1,5 m/s²
208 min.
832 min.
DC-EX 230
92 dB(A)
103 dB(A)
5,8 m/s²
1,5 m/s²
89 min.
356 min.
AC-D 230 1.8 Inox
n/a
n/a
n/a
4,6 m/s²
1,5 m/s²
n/a
n/a
Tool
Dust removal
available
Emission sound
pressure level
LpA*
AG 125-A22 (01)
--
DC 230-S (01)
DAG 125-S (01)
Productivity data
Cutting Wheel
AC-D 125 2,5mm USP
AC-D 230 1,8mm Inox
DAG 230-D (01)
DC-EX 230
90 dB(A)
101 dB(A)
5 m/s²
1,5 m/s²
120 min.
480 min.
AC-D 230 2,5mm USP
DCG 125-S (01)
AC-D 125 1,5mm Inox
DC-EX 125
(cut, slit & grind
hoods available)
90 dB(A)
DC-EX 230
90 dB(A)
101 dB(A)
5,7 m/s²
1,5 m/s²
92 min.
368 min.
AC-D 125 2,5mm USP
AC-D 230 1,8mm Inox
DCG 230-D (01)
101 dB(A)
5,0 m/s²
1,5 m/s²
120 min.
480 min.
AC-D 230 2,5mm USP
DEG 125-D (01)
DC-EX 125
(cut, slit & grind
hoods available)
AC-D 125 1,5mm Inox
89 dB(A)
100 dB(A)
7 m/s²
1,5 m/s²
61 min.
244 min.
AC-D 125 2,5mm USP
Number of cuts through channel to EAV 2.5 m/s2 (ELV 5 m/s2)
HSE Points
MQ 21/2
1440
(5760)
0.2
1210
(4840)
0.08
470
(1880)
0.2
190
(760)
0.5
2790
(11160)
0.04
2150
(8600)
0.04
720
(2880)
0.1
260
(1040)
0.4
2060
(8240)
0.05
1540
(6160)
0.06
560
(2240)
0.2
170
(680)
0.6
MQ 41/2
MQ 41/3
820
(3280)
0.1
320
(1280)
0.3
130
(520)
0.8
1390
(5560)
0.07
1330
(5320)
0.07
520
(2080)
0.2
180
(720)
0.6
1370
(5480)
0.07
1040
(4160)
0.1
380
(1520)
0.3
120
(480)
0.8
550
(2200)
0.2
220
(880)
0.5
90
(360)
1.1
870
(3480)
0.1
810
(3240)
0.1
370
(1480)
0.3
120
(480)
0.8
900
(3600)
0.1
700
(2800)
0.1
250
(1000)
0.4
80
(320)
1.2
www.hilti.com
18/32
Steel cutting tools
Cutting steel bars (square)
Tool
AG 125-A22 (01)
Dust
removal
available
n/a
Emission
Emission
sound pressure sound power
level LpA*
level*
83 dB(A)
94 dB(A)
Triaxial
vibration
value ahv*
3,8 m/s²
Basic tool data
Uncertainty K
1,5 m/s²
Productivity data
Time to EAV
208 min.
Time to ELV
832 min.
Cutting Wheel
AC-D 230 2.5mm USP
DC 230-S (01)
n/a
92 dB(A)
103 dB(A)
5,8 m/s²
1,5 m/s²
89 min.
356 min.
AC-D 230 1,8mm Inox
DAG 125-S (01)
n/a
n/a
n/a
4,6 m/s²
1,5 m/s²
n/a
n/a
AC-D 125 2,5mm USP
AC-D 230 2,5mm USP
DAG 230-D (01)
n/a
90 dB(A)
101 dB(A)
5 m/s²
1,5 m/s²
120 min.
480 min.
AC-D 230 1,8mm Inox
AC-D 125 2,5mm USP
DCG 125-S (01)
n/a
90 dB(A)
101 dB(A)
5,7 m/s²
1,5 m/s²
92 min.
368 min.
AC-D 125 1,5mm Inox
AC-D 230 2,5mm USP
DCG 230-D (01)
n/a
90 dB(A)
101 dB(A)
5,0 m/s²
1,5 m/s²
120 min.
480 min.
AC-D 230 1,8mm Inox
AC-D 125 2,5mm USP
DEG 125-D (01)
n/a
89 dB(A)
100 dB(A)
7 m/s²
1,5 m/s²
61 min.
244 min.
AC-D 125 1,5mm Inox
Square steel
Number of cuts through dimensions [mm] to EAV 2.5 m/s2 (ELV 5 m/s2)
HSE Points
13
1590
(6360)
0.06
1200
(4800)
0.08
1400
(5600)
0.07
550
(2200)
0.2
220
(880)
0.5
2570
(10280)
0.04
2580
(10320)
0.04
300
(1200)
0.3
810
(3240)
0.1
1780
(7120)
0.06
2400
(9600)
0.04
200
(800)
0.5
640
(2560)
0.2
20
25
30
40
470
(1880)
0.2
540
(2160)
0.2
215
(860)
0.5
80
(320)
1.25
790
(3160)
0.13
850
(3400)
0.01
120
(480)
0.8
370
(1480)
0.3
680
(2720)
0.1
870
(3480)
0.1
290
(1160)
0.3
190
(760)
0.5
100
(400)
1
110
(440)
0.9
110
(440)
0.9
140
(560)
0.7
140
(560)
0.7
170
(680)
0.6
70
(280)
1.4
250
(1000)
0.4
www.hilti.com
19/32
Steel cutting tools
Cutting steel bars (flat)
Tool
AG 125-A22 (01)
Dust
removal
available
Emission
Emission
sound pressure sound power
level LpA*
level*
Triaxial
vibration
value ahv*
n/a
83 dB(A)
3,8 m/s²
94 dB(A)
Basic tool data
Uncertainty K
Productivity data
Time to EAV
Time to ELV
Cutting Wheel
1,5 m/s²
208 min.
832 min.
AC-D 230 2.5mm USP
DC 230-S (01)
n/a
92 dB(A)
103 dB(A)
5,8 m/s²
1,5 m/s²
89 min.
356 min.
AC-D 230 1,8mm Inox
DAG 115-S (02)
n/a
n/a
n/a
n/a
1,5 m/s²
n/a
n/a
AC-D 115 2,5mm USP
DAG 125-S (01)
n/a
n/a
n/a
4,6 m/s²
1,5 m/s²
n/a
n/a
AC-D 125 2,5mm USP
AC-D 230 2,5mm USP
DAG 230-D (01)
n/a
90 dB(A)
101 dB(A)
5 m/s²
1,5 m/s²
120 min.
480 min.
AC-D 230 1,8mm Inox
AC-D 230 2,5mm USP
DCG 230-D (01)
n/a
90 dB(A)
101 dB(A)
5,0 m/s²
Flat steel
Number of cuts through dimensions [mm]
to EAV 2.5 m/s2 (ELV 5 m/s2)
HSE Points
1,5 m/s²
120 min.
480 min.
AC-D 230 1,8mm Inox
10 x 50
630
(2520)
0.2
370
(1480)
0.3
420
(1680)
0.2
370
(1480)
0.3
90
(360)
1.1
170
(680)
0.1
70
(280)
1.4
590
(2360)
0.2
650
(2600)
0.1
540
(2160)
0.2
680
(2720)
0.1
20 x 60
30 x 60
30 x 80
140
(560)
0.7
90
(360)
1.1
65
(260)
1.5
70
(280)
1.4
140
(560)
0.7
30
(120)
3.3
60
(240)
1.7
80
(320)
1.25
100
(400)
1.0
90
(360)
1.1
www.hilti.com
20/32
Steel cutting tools
Cutting cable trays
Basic tool data
Emission sound
Triaxial vibration
power level*
value ahv*
Uncertainty K
Time to EAV
Time to ELV
83 dB(A)
94 dB(A)
3,8 m/s²
1,5 m/s²
208 min.
832 min.
DC-EX
92 dB(A)
103 dB(A)
5,8 m/s²
1,5 m/s²
89 min.
356 min.
n/a
n/a
n/a
4,6 m/s²
1,5 m/s²
n/a
n/a
Tool
Dust removal
available
Emission sound
pressure level
LpA*
AG 125-A22 (01)
n/a
DC 230-S (01)
DAG 125-S (01)
Productivity data
Cutting Wheel
AC-D 125 2,5mm USP
DAG 230-D (01)
DC-EX
90 dB(A)
101 dB(A)
5 m/s²
1,5 m/s²
120 min.
480 min.
AC-D 230 2,5mm USP
DCG 125-S (01)
DC-EX 125 (cut, slit
& grind hoods
available)
90 dB(A)
DC-EX
90 dB(A)
101 dB(A)
5,7 m/s²
1,5 m/s²
92 min.
368 min.
AC-D 125 2,5mm USP
DCG 230-D (01)
101 dB(A)
5,0 m/s²
1,5 m/s²
120 min.
480 min.
AC-D 230 2,5mm USP
DEG 125-D (01)
89 dB(A)
& grind hoods
available)
100 dB(A)
7 m/s²
1,5 m/s²
61 min.
244 min.
AC-D 125 2,5mm USP
HSE Points
50mm
100mm
150mm
225mm
1590
(6360)
0.06
620
(2480)
0.16
250
(1000)
0.40
3000
(12000)
0.03
3000
(12000)
0.03
890
(3560)
0.11
340
(1360)
0.29
2740
(10960)
0.04
2020
(8080)
0.05
730
(2920)
0.14
230
(920)
0.43
1120
(4480)
0.09
440
(1760)
0.23
170
(680)
0.59
2000
(8000)
0.05
1950
(7800)
0.05
670
(2680)
0.15
240
(960)
0.42
1900
(7600)
0.05
1420
(5680)
0.07
510
(2040)
0.20
160
(640)
0.63
1340
(5360)
0.07
520
(2080)
0.19
210
(840)
0.48
2450
(9800)
0.04
2420
(9680)
0.04
780
(3120)
0.13
290
(1160)
0.34
2290
(9160)
0.04
1700
(6800)
0.06
610
(2440)
0.16
190
(760)
0.53
820
(3280)
0.12
320
(1280)
0.31
130
(520)
0.77
1380
(5520)
0.07
1320
(5280)
0.08
520
(2080)
0.19
180
(720)
0.56
1360
(5440)
0.07
1040
(4160)
0.10
370
(1480)
0.27
120
(480)
0.83
300mm
980
(3920)
0.1
740
(2960)
0.14
290
(1160)
0.34
120
(480)
0.83
1230
(4920)
0.08
1160
(4640)
0.09
480
(1920)
0.21
160
(640)
0.63
1220
(4880)
0.08
940
(3760)
0.11
340
(1360)
0.29
100
(400)
1.00
600mm
350
(1400)
0.29
155
(620)
0.65
60
(240)
1.67
520
(2080)
0.19
470
(1880)
0.21
240
(960)
0.42
85
(340)
1.18
560
(2240)
0.18
450
(1800)
0.22
185
(740)
0.54
55
(220)
1.82
Cutting sheet steel metal
Tool
Dust removal
available
Emission sound
pressure level
LpA*
AG 125-A22 (01)
--
83 dB(A)
Basic tool data
Emission sound
Triaxial vibration
power level*
value ahv*
Uncertainty K
Time to EAV
Time to ELV
94 dB(A)
1,5 m/s²
208 min.
832 min.
3,8 m/s²
Productivity data
Cutting Wheel
HSE Points
steel sheet metal (400mm x 1,4mm)
580
(2320)
0.17
Circular sawing metal
Tool
Dust removal
available
Emission sound
pressure level
LpA*
SCM 22-A (01)
--
77 dB(A)
Basic tool data
Emission sound
Triaxial vibration
power level*
value ahv*
Uncertainty k
88 dB(A)
1.5 m/s2
1.2 m/s²
Time to EAV
2083 min.
Time to ELV
8332 min.
Saw blade
all, Quick, Multi, Qualicut
Productivity data
Application & Work piece material
Cutting off 3 mm sheet metal
Metres till EAV
2.5 m/s2
Metres till ELV
5 m/s2
HSE Points
2500
10000
0.04
* Emission sound pressure level LpA and triaxial vibration value ahv according to European Standard EN 60745-2-x (Uncertainty (k): noise 3 dB(A).
www.hilti.com
21/32
Steel cutting tools
Cutting round steel bars
Basic tool data
Tool
Dust removal available Emission sound
pressure level
LpA*
Emission sound
power level*
Productivity data
Triaxial vibration
value ahv*
Uncertainty K
Time to EAV
Time to ELV
Cutting Wheel
HSE Points
AC-D 230 2,5mm USP
DC 230-S (01)
DC-EX
92 dB(A)
103 dB(A)
5,8 m/s²
1,5 m/s²
89 min.
356 min.
DAG 125-S (01)
n/a
n/a
n/a
4,6 m/s²
1,5 m/s²
n/a
n/a
AC-D 125 2,5mm USP
DAG 230-D (01)
DC-EX
90 dB(A)
101 dB(A)
5 m/s²
1,5 m/s²
120 min.
480 min.
AC-D 230 2,5mm USP
DCG 125-S (01)
DC-EX 125 (cut, slit &
grind hoods available)
90 dB(A)
101 dB(A)
5,7 m/s²
1,5 m/s²
92 min.
368 min.
AC-D 125 2,5mm USP
DCG 230-D (01)
DC-EX
90 dB(A)
101 dB(A)
5,0 m/s²
1,5 m/s²
120 min.
480 min.
AC-D 230 2,5mm USP
DEG 125-D (01)
89 dB(A)
100 dB(A)
7 m/s²
1,5 m/s²
61 min.
244 min.
AC-D 125 2,5mm USP
10mm
2770
(11080)
0.04
12mm
1860
(7440)
0.05
2180
(8720)
0.05
840
(3360)
0.12
330
(1320)
0.30
4320
(17280)
0.02
4440
(17760)
0.02
1160
(4640)
0.09
460
(1840)
0.22
3830
(15320)
0.03
2770
(11080)
0.04
990
(3960)
0.10
320
(1280)
0.31
15mm
20mm
61
(244)
1.64
30mm
250
(1000)
0.40
40mm
130
(520)
0.77
1320
(5280)
0.08
520
(2080)
0.19
210
(840)
0.48
2410
(9640)
0.04
2390
(9560)
0.04
770
(3080)
0.13
290
(1160)
0.34
2260
(9040)
0.04
1680
(6720)
0.06
600
(2400)
0.17
190
(760)
0.53
www.hilti.com
22/32
Steel cutting tools
Cutting steel pipes
Tool
Dust removal
available
Emission sound
pressure level
LpA*
Basic tool data
power level*
vibration value
ahv*
Uncertainty K
Time to EAV
Time to ELV
Cutting Wheel
1" steel pipe
AC-D 230 2.5mm USP
DC 230-S (01)
n/a
92 dB(A)
103 dB(A)
5,8 m/s²
1,5 m/s²
89 min.
356 min.
AC-D 230 1,8mm Inox
DAG 125-S (01)
n/a
n/a
n/a
4,6 m/s²
1,5 m/s²
n/a
n/a
AC-D 125 2,5mm USP
AC-D 230 2.5mm USP
DAG 230-D (01)
n/a
90 dB(A)
101 dB(A)
5 m/s²
1,5 m/s²
120 min.
480 min.
AC-D 230 1,8mm Inox
AC-D 230 1.8mm Inox
DCG 125-S (01)
n/a
90 dB(A)
101 dB(A)
5,7 m/s²
1,5 m/s²
92 min.
368 min.
AC-D 230 2.5mm USP
AC-D 230 1.8mm Inox
DCG 230-D (01)
n/a
90 dB(A)
101 dB(A)
5,0 m/s²
1,5 m/s²
120 min.
480 min.
AC-D 230 2.5mm USP
AC-D 125 1.5mm Inox
DEG 125-D (01)
n/a
89 dB(A)
100 dB(A)
7 m/s²
Productivity data
Number of cuts through diameter [mm] to EAV 2.5 m/s2 (ELV 5 m/s2)
1,5 m/s²
61 min.
244 min.
AC-D 125 2.5mm USP
diameter: 33.8 mm
thickness: 2.8 mm
710
(2840)
0.1
880
(3520)
0.1
350
(1400)
0.2
140
(560)
0.7
1440
(5760)
0.07
1550
(6200)
0.06
550
(2200)
0.2
190
(760)
0.3
1470
(5880)
0.07
1120
(4480)
0.09
400
(1600)
0.2
120
(480)
0.8
HSE points
2" steel pipe
diameter: 60.4 mm
thickness: 2.8 mm
360
(1440)
0.3
390
(1560)
0.3
160
(640)
0.6
60
(240)
1.7
530
(2120)
0.2
590
(2360)
0.2
280
(1120)
0.4
90
(360)
1.1
630
(2520)
0.2
500
(2000)
0.2
180
(720)
0.5
60
(240)
1.7
3" steel pipe
diameter: 89 mm
thickness: 2.8 mm
270
(1080)
0.4
310
(1240)
0.3
350
(1400)
0.3
290
(1160)
0.3
www.hilti.com
23/32
Steel cutting tools
Cutting rods (M10)
Basic tool data
Tool
Dust removal available
Emission
sound
pressure
level LpA*
Productivity data
Emission
Triaxial
sound
vibration
power level* value ahv*
Uncertainty K
Time to EAV
Time to ELV
Cutting Wheel
HSE Points
1340
(5360)
0.07
1080
(4320)
0.09
2340
(9360)
0.04
760
(3040)
0.13
1980
(7920)
0.05
770
(3080)
0.13
DCG 125-S (01)
DC-EX 125 (cut, slit & grind
hoods available)
90 dB(A)
101 dB(A)
5,7 m/s²
1,5 m/s²
92 min.
368 min.
AC-D 125 2,5mm USP
DEG 125-D (01)
hoods available)
89 dB(A)
100 dB(A)
7 m/s²
1,5 m/s²
61 min.
244 min.
AC-D 125 2,5mm USP
DAG 125-S (01)
n/a
n/a
n/a
4,6 m/s²
1,5 m/s²
n/a
n/a
AC-D 125 2,5mm USP
Cutting pipes
Basic tool data
Productivity data
Tool
Dust removal available
Emission
sound
pressure
level LpA*
Emission
Triaxial
sound
vibration
power level* value ahv*
Uncertainty K
Time to EAV
Time to ELV
Cutting Wheel
DAG 115-S (02)
n/a
n/a
n/a
n/a
1,5 m/s²
n/a
n/a
AC-D 115 2,5mm USP
DAG 125-S (01)
n/a
n/a
n/a
4,6 m/s²
1,5 m/s²
n/a
n/a
DAG 230-D (01)
DC-EX
90 dB(A)
101 dB(A)
5 m/s²
1,5 m/s²
120 min.
480 min.
AC-D 230 2,5mm USP
DC 230-S (01)
DC-EX
92 dB(A)
103 dB(A)
5,8 m/s²
1,5 m/s²
89 min.
356 min.
AC-D 230 1.8mm Inox USP
DCG 125-S (01)
hoods available)
90 dB(A)
101 dB(A)
5,7 m/s²
1,5 m/s²
92 min.
368 min.
AC-D 125 2,5mm USP
DCG 230-D (01)
DC-EX
90 dB(A)
101 dB(A)
5 m/s²
1,5 m/s²
120 min.
480 min.
DEG 125-D (01)
hoods available)
89 dB(A)
100 dB(A)
7 m/s²
1,5 m/s²
61 min.
244 min.
AC-D 230 2,5mm USP
AC-D 125 2,5mm USP
HSE Points
Pipe OD 42,4 x 2
200
(800)
0.50
350
(1400)
0.29
1450
(5800)
0.07
880
(3520)
0.11
550
(2200)
0.18
190
(760)
0.53
1120
(4480)
0.09
400
(1600)
0.25
130
(520)
0.77
Pipe OD 42,4 x 3.25
110
(440)
0.91
210
(840)
0.48
780
(3120)
0.13
530
(2120)
0.19
360
(1440)
0.28
110
(440)
0.91
670
(2680)
0.15
250
(1000)
0.40
70
(280)
1.43
www.hilti.com
24/32
Steel cutting tools
Cutting pipes
Tool
Dust removal
available
Basic tool data
Triaxial
pressure Level sound power vibration
LpA*
level*
value ahv*
Productivity data
Uncertainty K
Time to EAV
Time to ELV
Cutting Wheel
DAG 125-S (01)
n/a
n/a
n/a
4,6 m/s²
1,5 m/s²
n/a
n/a
AC-D 125 2,5mm USP
DCG 125-S (01)
90 dB(A)
101 dB(A)
5,7 m/s²
1,5 m/s²
92 min.
368 min.
AC-D 125 2,5mm USP
DEG 125-D (01)
89 dB(A)
100 dB(A)
7 m/s²
1,5 m/s²
61 min.
244 min.
AC-D 125 2,5mm USP
HSE Points
13mm steel pipe (Ø 13.1 x1.2mm)
2320
(9280)
0.04
900
(3600)
0.11
2700
(10800)
0.04
1270
(5080)
0.08
2740
(10960)
0.04
900
(3600)
0.11
22 mm steel pipe (Ø22.2 x 1.2mm)
1250
5000
0.08
490
(1960)
0.20
1610
(6440)
0.06
690
(2760)
0.14
1480
(5920)
0.07
470
(1880)
0.21
Cutting C-Rails
Basic tool data
Tool
Productivity data
Dust removal
available
pressure level
sound power
LpA*
level*
Triaxial
vibration
value ahv*
Uncertainty K
Time to EAV
Time to ELV
Cutting Wheel
DC 230-S (01)
DC-EX
92 dB(A)
103 dB(A)
5,8 m/s²
1,5 m/s²
89 min.
356 min.
DAG 115-S (02)
n/a
n/a
n/a
n/a
1,5 m/s²
n/a
n/a
AC-D 115 2,5mm USP
DAG 125-S (01)
n/a
n/a
n/a
4.6 m/s²
1,5 m/s²
n/a
n/a
AC-D 1 25 1,5mm Inox USP
DAG 230-D (01)
DC-EX
90 dB(A)
101 dB(A)
5 m/s²
1,5 m/s²
120 min.
480 min.
HSE Points
AC-D 230 2,5mm USP
DCG 125-S (01)
90 dB(A)
101 dB(A)
5,7 m/s²
1,5 m/s²
92 min.
368 min.
AC-D 125 2,5mm USP
DCG 230-D (01)
DC-EX
90 dB(A)
101 dB(A)
5,0 m/s²
1,5 m/s²
120 min.
480 min.
AC-D 230 2,5mm USP
DEG 125-D (01)
89 dB(A)
100 dB(A)
7 m/s²
1,5 m/s²
61 min.
244 min.
AC-D 125 2,5mm USP
1060
(4240)
0.09
250
(1000)
0.40
420
(1680)
0.24
1880
(7520)
0.05
1830
(7320)
0.05
640
(2560)
0.16
230
(920)
0.43
1800
(7200)
0.06
1350
(5400)
0.07
490
(1960)
0.20
150
(600)
0.67
www.hilti.com
25/32
Steel cutting tools
Cutting sheet metal decking
Tool
Dust removal Emission
available
sound
pressure
Level LpA*
Basic tool data
Emission
Triaxial
level*
value ahv*
Uncertainty K
Time to
EAV
Time to ELV
Cutting Wheel
Productivity data
Work piece material
HSE points
Structural metal decking 1.2mm thick cut along deck 1m
DC 230-S (01)
DC-EX
92 dB(A)
103 dB(A)
5,8 m/s²
1,5 m/s²
89 min.
356 min.
AC-D 230 1.8mm Inox
Structural metal decking 1.2mm thick cut across 60mm width,"Comflor
51"&"Metfloor 51"
DAG 115-S (02)
n/a
n/a
n/a
n/a
1,5 m/s²
n/a
n/a
AC-D 115 2,5mm USP
51"&"Metfloor 51"
DAG 125-S (01)
n/a
n/a
n/a
4,6 m/s²
1,5 m/s²
n/a
n/a
51"&"Metfloor 51"
AC-D 230 1,8mm Inox
51"&"Metfloor 51"
DAG 230-D (01)
DC-EX
90 dB(A)
101 dB(A)
5 m/s²
1,5 m/s²
120 min.
480 min.
AC-D 230 2,5mm USP
51"&"Metfloor 51"
DCG 125-S (01)
DC-EX 125
(cut, slit &
grind hoods
available)
51"&"Metfloor 51"
90 dB(A)
101 dB(A)
5,7 m/s²
1,5 m/s²
92 min.
368 min.
AC-D 125 2,5mm USP
51"&"Metfloor 51"
51"&"Metfloor 51"
DCG 230-D (01)
DC-EX
90 dB(A)
101 dB(A)
5,0 m/s²
1,5 m/s²
120 min.
480 min.
AC-D 230 2,5mm USP
51"&"Metfloor 51"
DEG 125-D (01)
DC-EX 125
(cut, slit &
grind hoods
available)
51"&"Metfloor 51"
89 dB(A)
Number of cuts for diameter [mm] to
EAV 2.5 m/s2
(ELV 5 m/s2)
100 dB(A)
7 m/s²
1,5 m/s²
61 min.
244 min.
AC-D 125 2,5mm USP
51"&"Metfloor 51"
190
(760)
0.53
150
(600)
0.67
45
(180)
2.22
35
(140)
2.86
75
(300)
1.33
55
(220)
1.82
340
(1360)
0.29
260
(1040)
0.38
330
(1320)
0.30
255
(1020)
0.39
115
(460)
0.87
85
(340)
1.18
40
(160)
2.50
30
(120)
3.33
325
(1300)
0.31
250
(1000)
0.40
240
(960)
0.42
190
(760)
0.53
85
(340)
1.18
65
(260)
1.54
25
(100)
4.00
20
(80)
5.00
www.hilti.com
26/32
Steel cutting tools
Cutting ducts
Tool
AG 125-A22 (01)
Dust removal
available
n/a
Emission sound
pressure level
LpA*
83 dB(A)
Basic tool data
Emission sound
Triaxial vibration
power level*
value ahv*
94 dB(A)
3,8 m/s²
Productivity data
Uncertainty K
1,5 m/s²
Time to EAV
208 min.
Time to ELV
832 min.
Cutting Wheel
DAG 125-S (01)
n/a
n/a
n/a
4,6 m/s²
1,5 m/s²
n/a
n/a
AC-D 125 2,5mm USP
DAG 230-D (01)
DC-EX
90 dB(A)
101 dB(A)
5 m/s²
1,5 m/s²
120 min.
480 min.
AC-D 230 2,5mm USP
DC 230-S (01)
DC-EX
92 dB(A)
103 dB(A)
5.8 m/s²
1,5 m/s²
89 min.
356 min.
DCG 125-S (01)
& grind hoods
available)
90 dB(A)
101 dB(A)
5.7 m/s²
1,5 m/s²
92 min.
368 min.
DC-EX
90 dB(A)
AC-D 125 2,5mm USP
DCG 230-D (01)
101 dB(A)
5,0 m/s²
1,5 m/s²
120 min.
480 min.
AC-D 230 2,5mm USP
AC-D 125 2,5mm USP
DEG 125-D (01)
89 dB(A)
100 dB(A)
7 m/s²
1,5 m/s²
61 min.
244 min.
HSE Points
100 mm Ø duct x 0.5mm
w.t
1190
(4760)
0.08
1230
(4920)
0.08
480
(1920)
0.21
6750
(27000)
0.01
7100
(28400)
0.01
3200
(12800)
0.03
670
(2680)
0.15
1590
(6360)
0.06
5750
(23000)
0.02
4050
(16200)
0.02
450
(1800)
0.22
1450
(5800)
0.07
w.t.
w.t.
280
(1120)
0.36
110
(440)
0.91
1150
(4600)
0.09
1100
(4400)
0.09
700
(2800)
0.14
150
(600)
0.67
460
(1840)
0.22
1150
(4600)
0.09
900
(3600)
0.11
100
(400)
1.00
325
(1300)
0.31
100
(400)
1.00
35
(140)
2.86
255
(1020)
0.39
220
(880)
0.45
190
(760)
0.53
45
(180)
2.22
140
(560)
0.7
295
(1180)
0.34
240
(960)
0.42
30
(120)
3.33
100
(400)
1
Cutting pipes
Tool
AG 125-A22 (01)
Dust removal
available
--
Emission sound
pressure level
LpA*
83 dB(A)
Basic tool data
Emission sound
Triaxial vibration
power level*
value ahv*
Productivity data
Uncertainty K
Time to EAV
Time to ELV
Cutting Wheel
HSE Points
94 dB(A)
3,8 m/s²
1,5 m/s²
208 min.
832 min.
steel pipe 17.2x1.8mm
EN 10216-1
2800
(11200)
0.03
EN 10216-1
2100
(8400)
0.05
EN 10216-1
1130
(4520)
0.09
www.hilti.com
27/32
Direct fastening tools
Tool
Cartridge color
Vibration
Allowed number of fastenings per day
2
EAV 2.5 m/s
ELV 5 m/s2
HSE Points
Noise
Workplace relevant emmission value LpA*,1s
GX 120/GX 120-ME
-
3500
14000
0.03
102 dB(A)
GX 100/GX 100-E
-
2700
10800
0.04
102 dB(A)
GX 90 WF
-
25000
100000
0.00
106 dB/A)
white
2100
8400
green
1900
7600
DX 351
yellow
1100
4400
red
800
3200
green
1300
5200
yellow
1000
4000
DX 460
red
1000
4000
black
600
2400
blue
700
2800
DX 76
red
600
2400
black
400
1600
* Sound pressure level LpA, 1s measured at user`s ear according to standard EN 12549. Wear ear plugs according to operating instructions.
Vibration
EAV 2.5 m/s2
ELV 5 m/s2
blue
3500
1400
DX 860 ENP
red
2600
10400
black
1800
7200
yellow
5600
22400
DX 860 HSN
red
5500
22000
black
3000
12000
brown
1000
4000
DX E72
green
900
3600
yellow
700
2800
green
600
2400
DX 36
yellow
500
2000
red
500
2000
0.05
0.05
0.09
0.13
0.08
0.10
0.10
0.17
0.14
0.17
0.25
Tool
Cartridge color
Vibration
2
EAV 2.5 m/s
ELV 5 m/s2
green
1300
5200
yellow
1000
4000
DX A41
red
1000
4000
black
600
2400
blue
600
2400
DX 750
red
500
2000
black
400
1600
HSE Points
0.03
0.04
0.06
0.02
0.02
0.03
0.10
0.11
0.14
0.17
0.20
0.20
Tool
Cartridge color
HSE Points
0.08
0.10
0.10
0.17
0.17
0.20
0.25
104 dB(A)
103 dB(A)
110 dB(A)
Noise
106 dB(A)
100 dB(A)
109 dB(A)
100 dB(A)
Noise
103 dB(A)
110 dB(A)
Fastening
The cartridge colour is listed followed by the number of fastenings that can be made in a given day before reaching the EAV and ELV. The HSE points per fixing are listed.
www.hilti.com
28/32
Saws
Reciprocating saws
Tool
system
sound
pressure level
LpA*
Basic tool data
Emission
Triaxial
sound power
vibration
level*
value ahv*
Uncertainty k
Time till EAV
Time till ELV
16 m/s²
12 min.
48 min.
1.5 m/s2
18 m/s²
9 min.
36 min.
1.5 m/s2
2
13 m/s²
18 min.
72 min.
5 m/s
WSR 36-A (01)
no
90 dB(A)
101 dB(A)
2
16 m/s²
12
min.
48 min.
4 m/s
2
12 m/s²
21 min.
84 min.
2.5
m/s
WSR 650-A (01)
no
84 dB(A)
95 dB(A)
2
16 m/s²
12 min.
48 min.
5 m/s
2
16 m/s²
12
min.
48 min.
2.5 m/s
no
89 dB(A)
100 dB(A)
WSR 900-PE (01)
23 m/s²
6 min.
24 min.
3.5 m/s2
2
22 m/s²
6 min.
24 min.
2.5 m/s
WSR 1250-PE (01)
no
90 dB(A)
101 dB(A)
26.5 m/s²
4 min.
16. min
3.5 m/s3
2
20 m/s²
8 min.
32 min.
2.5
m/s
WSR 1400-PE (01)
no
91 dB(A)
102 dB(A)
3
28 m/s²
4
min.
16 min.
3.5 m/s
* Emission sound pressure level LpA and triaxial vibration value ahv according to EN 60745-2-x (Uncertainty (k): noise 3 dB(A), depending on tool and application).
WSR 22-A (01)
n/a
82 dB(A)
93 dB(A)
Saw blade
WU 20
WF 23
WU 20
WF 23
WU 20
WF 23
WU 20
WF 23
WU 20
WF 23
WU 20
WF 23
Productivity data
Cutting off 38 mm chipboard
Cutting off (100 x 100) mm wooden beam
Cutting chipboard (thickness 38 mm)
Cutting wooden beams (100 x 100 mm fir)
Work till
EAV 2.5 m/s2
Work till
ELV 5 m/s2
HSE Points per
m or cut
19 m
4 cuts
47 m
6 cuts
61 m
10 cuts
48 m
4 cuts
28 m
4 cuts
35 m
4 cuts
76 m
16 cuts
188 m
20 cuts
244 m
40 cuts
192 m
16 cuts
112 m
16 cuts
140 m
16 cuts
5.4
25.0
2.2
1.6
1.6
1.0
2.1
2.6
3.6
2.3
2.9
2.9
Work till
EAV 2.5 m/s2
Work till
ELV 5 m/s2
HSE Points
50 m
23 m
70 m
26 m
75 m
24 m
110 m
29 m
200 m
92 m
280 m
104 m
300 m
96 m
440 m
116 m
2.0
4.3
1.4
1.0
0.3
4.2
0.9
3.4
Metres till
EAV 2.5 m/s2
Metres till
ELV 5 m/s2
HSE Points
13500 m
1800 m
5200 m
3000 m
9000 m
4000 m
7400 m
4800 m
5000 m
4000 m
3300 m
1200 m
3500 m
3300 m
2500 m
3000 m
54000 m
7200 m
20800 m
12000 m
36000 m
16000 m
29600 m
19200 m
20000 m
16000 m
13200 m
4800 m
14000 m
13200 m
10000 m
12000 m
0.01
0.06
0.02
0.03
0.01
0.03
0.01
0.02
0.02
0.03
0.03
0.08
0.03
0.03
0.04
0.03
Jig saws
Tool
system
sound
pressure level
LpA*
Basic tool data
Emission
Triaxial
sound power
vibration
level*
value ahv*
Uncertainty k
Time till EAV
Time till ELV
13 m/s²
18 min.
72 min.
1.5 m/s2
5 m/s²
120 min.
480 min.
1.5 m/s2
2
10.5 m/s²
27 min.
108 min.
1.5
m/s
WSJ 750-ET (01)
WSJ-DRS
87 dB(A)
98 dB(A)
2
4 m/s²
188 min.
752 min.
1.5 m/s
2
11 m/s²
25
min.
100 min.
1.5 m/s
WSJ-DRS
88 dB(A)
99 dB(A)
WSJ 850-EB (01)
5 m/s²
120 min.
480 min.
1.5 m/s2
2
9 m/s²
37 min.
148 min.
1.8 m/s
WSJ 850-ET (01)
WSJ-DRS
87 dB(A)
98 dB(A)
2
4 m/s²
188
min.
752 min.
1.5 m/s
WSJ 750-EB (01)
WSJ-DRS
88 dB(A)
99 dB(A)
Saw blade
W91/P HCS
M50/2 BIM
W91/P HCS
M50/2 BIM
W91/P HCS
M50/2 BIM
W91/P HCS
M50/2 BIM
Productivity data
Cutting off 3mm sheet metal
Circular saws
Tool
system
sound
pressure level
LpA*
Basic tool data
Emission
Triaxial
sound power
vibration
level*
value ahv*
Uncertainty k
Time to EAV
Time to ELV
Saw blade
WSC 55-A24 (01)
95 dB(A)
106 dB(A)
VC
2.5 m/s²
480 min.
1920 min.
1.5 m/s
WSC-55 (02)
VC
94 dB(A)
105 dB(A)
2.5 m/s²
480 min.
1920 min.
1.5 m/s2
WSC 70-A36 (01)
VC
97 dB(A)
108 dB(A)
2.5 m/s²
480 min.
1920 min.
1.5 m/s2
2
WSC 70 (01)
VC
94 dB(A)
105 dB(A)
2.5 m/s²
480 min.
1920 min.
1.5 m/s
VC
100 dB(A)
111 dB(A)
WSC 85 (01)
2.5 m/s²
480 min.
1920 min.
1.5 m/s2
WSC 255 (01)
VC
92 dB(A)
103 dB(A)
2.5 m/s²
480 min.
1920 min.
1.5 m/s2
2
WSC-265-KE (01)
VC
89 dB(A)
100 dB(A)
2.5 m/s²
480 min.
1920 min.
1.5 m/s
Cutting
SCW 22-A (01)
VC
93 dB(A)
104 dB(A)
1.2 m/s²
1.5 m/s2
2083 min.
8332 min.
2
Productivity data
Cutting 55 mm softwood
The length of material and number of cuts that can be made for a particular tool and aplication in one working day before reaching the EAV and ELV are listed under the productivity data.
www.hilti.com
29/32
Saws
Reciprocating saws cutting steel pipes
Tool
Dust removal
system
Emission sound
pressure level
LpA*1
Basic tool data
Emission
Triaxial
sound power
vibration
value ahv*
level*1
WSR 22-A (01)
n/a
>82 dB(A)
>89 dB(A)
WSR 36-A (01)
no
>90 dB(A)
>101 dB(A)
Uncertainty k
Time till EAV
Time till ELV
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
WSR 900-PE (01)
no
>89 dB(A)
>100 dB(A)
n/a
n/a
n/a
n/a
WSR 1250-PE (01)
no
>89 dB(A)
>100 dB(A)
n/a
n/a
n/a
n/a
WSR 1400-PE (01)
no
>89 dB(A)
>100 dB(A)
n/a
n/a
n/a
n/a
Saw blade
W-CSR MS 15 P
W-CSR MS 15 P
W-CSR MS 15 P
W-CSR MS 15 P
W-CSR MQ 15
W-CSR MQ 15
W-CSR MQ 15
W-CSR MQ 15
W-CSR MS 15 P
W-CSR MS 15 P
W-CSR MS 15 P
W-CSR MS 15 P
W-CSR MS 23 P
W-CSR MS 15 P
W-CSR MS 15 P
W-CSR MS 15 P
W-CSR MS 15 P
W-CSR MS 23 P
W-CSR MS 15 P
W-CSR MS 15 P
W-CSR MS 15 P
W-CSR MS 15 P
W-CSR MS 23 P
Productivity data
Work till EAV
2.5 m/s2
cutting 17.2x1.8mm steelpipe
Work till ELV
m/s2
5
HSE Points
per cut
82 cuts
55 cuts
26 cuts
12 cuts
170 cuts
140 cuts
45 cuts
14 cuts
328 cuts
220 cuts
104 cuts
48 cuts
680 cuts
560 cuts
180 cuts
56 cuts
1.2
1.8
3.8
8.3
0.6
0.7
2.2
7.1
175 cuts
135 cuts
47 cuts
19 cuts
9 cuts
84 cuts
48 cuts
19 cuts
14 cuts
7 cuts
188 cuts
127 cuts
44 cuts
21 cuts
10 cuts
700 cuts
540 cuts
188 cuts
76 cuts
36 cuts
336 cuts
192 cuts
76 cuts
56 cuts
28 cuts
752 cuts
508 cuts
176 cuts
84 cuts
40 cuts
0.6
0.7
2.1
5.2
11.1
1.2
2.1
5.2
7.1
14.2
0.5
0.8
2.3
4.8
10.0
Reciprocating saws cutting channels
Tool
Dust removal
system
Emission sound
pressure level
LpA*1
Basic tool data
Emission
Triaxial
sound power
vibration
1
value ahv*
level*
WSR 22-A (01)
n/a
>82 dB(A)
>93 dB(A)
WSR 36-A (01)
n/a
>90 dB(A)
WSR 900-PE (01)
n/a
WSR 1250-PE (01)
WSR 1400-PE (01)
Uncertainty k
Time till EAV
Time till ELV
n/a
n/a
n/a
n/a
>101 dB(A)
n/a
n/a
n/a
n/a
>89 dB(A)
>100 dB(A)
n/a
n/a
n/a
n/a
n/a
>89 dB(A)
>100 dB(A)
n/a
n/a
n/a
n/a
n/a
>89 dB(A)
>100 dB(A)
n/a
n/a
n/a
n/a
Saw blade
Productivity data
Work till EAV
2.5 m/s2
Work till ELV
m/s2
5
HSE Points
per cut
W-CSR MQ 15
W-CSR MQ 15
W-CSR MQ 15
W-CSR MQ 15
W-CSR MQ 15
W-CSR MQ 15
MQ 21/2 channel
MQ 41/3 channel
MQ 21/2 channel
MQ 41/3 channel
MQ 21/2 channel
MQ 41/3 channel
28 cuts
17 cuts
112 cuts
68 cuts
3.6
5.9
55 cuts
25 cuts
130 cuts
47 cuts
220 cuts
100 cuts
520 cuts
188 cuts
1.8
4.0
0.7
2.1
W-CSR MQ 15
W-CSR MQ 15
W-CSR MQ 15
W-CSR MQ 15
MQ 21/2 channel
MQ 41/3 channel
MQ 21/2 channel
MQ 41/3 channel
52 cuts
25 cuts
116 cuts
45 cuts
208 cuts
100 cuts
464 cuts
180 cuts
1.9
4.0
0.9
2.2
1
Emission sound pressure level and Emission sound power level values recorded here are for wood applications, so steel application values may differ depending on the work piece used
Cutting
The length of material and number of cuts that can be made for a particular tool and aplication in one working day before reaching the EAV and ELV are listed under the productivity data.
www.hilti.com
30/32
How to read the Tool Selector
Applications
Sound pressure value
The sound pressure level is the physical value which is directly processed by the human ear. It is measured with standard microphones in
accordance with EN 60745. The sound pressure level is strongly dependent on the location of the tool in relation to the microphone. Due to
this dependence it is not a reliable quantity for technical documentation. Therefore, we also declare sound power value.
Drilling
The number of holes that can be drilled for a particular tool and given diameter, depth, workpiece material and
consumable in a working day before the EAV and ELV (shown in brackets) are given under the productivity data section.
The red value is the number of HSE points per hole for the given tool and application.
Sound power value
This value is computed from several sound pressure levels at different measurement locations. It stands for an overall acoustic energy
dissipated by the tool. Ear protection should be used as defined by employer.
Breaking
The volume of material that can be broken for a particular tool and given workpiece material and consumable in a
working day before the EAV and ELV (shown in brackets) are given in the productivity data section. The red value is the
number of HSE points per litre for the given tool and application.
Vibration values
Measured in accordance with EN 60745. In certain applications where EN 60745 may not apply, BS EN 5349 is used. All data
complies with the Control of Vibration at Work Regulations 2005. The tri-axial vibration value is required for risk analysis.
Impact Fastening
EAV
The "Exposure Action Value" (EAV) of 2.5 m/s² is the safer limit and can be worked to without any additional controls in place (risk
assessment, health surveillance, inspection etc.). Employees should always aim to work to the EAV.
Diamond Coring
ELV
The "Exposure Limit Value" (EAV) of 5 m/s² is the absolute maximum level allowed and only where additional controls are in place.
Fastening
The cartridge colour is listed followed by the number of fastenings that can be made in a given day before reaching the
EAV and ELV. The HSE points per fixing are listed.
Consumables
Cutting
The length of material and number of cuts that can be made for a particular tool and aplication in one working day before
reaching the EAV and ELV are listed under the productivity data.
All values given are valid only for the given tool and consumable.
The number of screws that can be set for a particular tool and given workpiece material and screw type in a working day
before the EAV and ELV (shown in brackets) are given under the productivity data section. The red value is the number
of HSE points per hole for the given tool and application.
The number of holes that ca be made for a particular tool given diameter, depth, work piece material and consumable in
one working day before reaching the EAV and ELV (shown in brackets) are given under the productivity data. The red
value is the number of HSE points per hole for the given application.
HSE Points
The exposure points system is a simple alternative for describing and managing exposures in the workplace. It helps to make the system
more tangible and is useful especially when carriing out more than one applications per day.
In this product selector the HSE points system have been combined with Hilti’s productivity figures.
The EAV allows a maximum of 100 point per day.
The ELV allows a maximum of 400 point per day.
Example:
Tool
TE 2
Material
Detail
Concrete 40 N/mm² Hole depth: 100 mm
Hole diameter: 10 mm
TE 76-ATC Concrete 40 N/mm² Hole depth: 100 mm
Hole diameter: 24 mm
DX 76
Cartridge: Red
GX 120
-
HSE Points Applications
2.0
20
Total Points
40
2.7
10
27
0.1667
0.0286
50
100
8.3
2.9
78.2
This case comes in at below the EAV.
www.hilti.com
31/32
Disclaimer
Disclaimer for power tool selector
The vibration emission levels given in this information sheet have
been measured in accordance with a standardised test described
in EN 60745-1: 2006 or EN 61029 and may be used to compare
one tool with another. They may be used for a preliminary
assessment of exposure.
The declared vibration emission levels represent the main
applications of the tools. However if the tools are used for
different applications, with different accessories or are poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
The vibration values listed are triaxial measurements made in
accordance with EN 60745-1:2006 or EN 61029.
The vibration values shown are generated from laboratory test
data and do not guarantee actual vibration values for any specific
application on site. The values are rounded averages.
Noise values are measured in accordance with EN 60745-1:2006
or EN 61029. Regardless of the noise value, Hilti strongly
recommends that appropriate noise protection is worn.
The material used for the measurements is defined as following:
– Rotary hammers, combi hammers, breakers and diamond coring
tools are measured on concrete with a minimum compressive
strength of 40 N/mm2 (after 28 days). The concrete is not
An estimation of the level of exposure to vibration should also
reinforced. The depth of the holes drilled is stated in the respective
take into account the times when the tool is switched off or when it table.
is running but not actually doing the job. This may significantly
– Reciprocating saws are measured on chipboard with the
reduce the exposure level over the total working period.
dimensions of 600 x 38 mm and beams of fir wood with the
dimensions of 100 x 100 mm.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the
The size of opening chiselled by the small breakers up to and
accessories, keep the hands warm, organisation of work patterns. including the TE 706 represents chiselling out an opening in a wall
The respective numbers shown in the selector indicate as follows: (e.g. for a window) in solid material, i.e. the opening is surrounded
The productivity values are calculated on the basis of the
vibration value and performance of the tool and are measured in
the procedures according to EN 60745-1:2006 or EN 61029.
They vary, depending on many factors, such as the material,
possible rebar hits, type and sharpness of the bit, chisel or blade
used and the working behaviour of the user etc. All values are
measured using new Hilti power tools and bits, chisels, blades
etc.
Drilling into or through rebars influences the rate of drilling
progress and vibration emissions. This, as a rule, leads to a
significant reduction of overall productivity (decrease in the
number of holes drilled).
The values given in the tool and application selectors are
therefore to be used only as a guideline. The employer is
responsible for ensuring that limit values are not exceeded.
The efficiency of dust removal systems depends strongly on their
correct use as well as the conditions on the jobsite, e.g. the type
and surface shape of the material worked on. The values given
and statements made with respect to dust removal are therefore
an indication only.
by concrete on all sides.
– Rotary hammers (1):
Numbers of holes that can be drilled in one working day without
exceeding the exposure action value or exposure limit value as
defined in the EU vibration directive 2002/44/EC.
– Combi hammers (2):
Numbers of holes that can be drilled or respectively the size of
opening that can be chiselled in one working day without
– Breakers (3):
The size of opening that can be chiselled in one working day
without exceeding the exposure action value or exposure limit
value as defined in the EU vibration directive 2002/44/EC.
– Diamond coring tools (4):
Numbers of hole that can be drilled in one working day without
– Reciprocating saws (5):
Number of cutting meters that can be cut or respectively the
number of cuts that can be performed in one working day without
www.hilti.com
Dust from material such as paint containing lead, some wood
When chiselling at the edge of a slab, performance is higher by a species, minerals and metal may be harmful.
factor of 2–3. With the TE 805 and TE 905-AVR, the application is
demolition chiselling towards the ground on an edge.
Contact with or inhalation of the dust may cause allergic
reactions and/or respiratory diseases to the operator or
bystanders.
Disclaimer for direct fastening
selector
These vibration and noise values are therefore to be used as a
guideline only. The employer is responsible for adhering to legal
requirements applicable to workplace health and safety and for
evaluation of the actual vibration and noise values by taking the
appropriate on-site measurements.
Underlying measurements for vibration values are onedimensional and taken in typical applications under laboratory
conditions in accordance with ISO 8662-11.
Certain kinds of dust are classified as carcinogenic such as oak
and beech dust especially in conjunction with additives for wood
conditioning (chromate, wood preservative). Material containing
asbestos must only be treated by specialists.
• Where the use of a dust extraction device is possible it shall be
used.
• The work place must be well ventilated.
• The use of a dust mask of filter class P2 is recommended.
Follow national requirements for the materials you want to work
Underlying measurements for noise values are taken in typical
with.
applications under laboratory conditions in accordance with EN 12
549 acoustics – noise test code for fastener driving tools.
32/32

Tool selector

Transcription

Similar documents

Tool selector

Tata Steel International Product Range 2010