ECOLift - Stertil Koni USA

Heavy-duty in-ground lift
ECOLift
The superior, flexible solution
with a lifting capacity
of 30,000 lbs per scissor
STERTIL
Superior solutions by
qualit y people
Superior
solutions
by quality
people
The Stertil Group provides customized and technically advanced lifting
solutions for heavy-duty customers worldwide, as well as superior after-sales
service from factory trained local distributors. These superior solutions are
conceived, developed and implemented by a team of industry experts with years of
field experience. Stertil-Koni is a worldwide leader for heavy duty vehicle lifts
as a result of its quality people, in-house research/development and global focus.
The
Stertil-Koni
ECOLIFT
The Stertil-Koni ECOLIFT is the industry’s first, U.S.
foundation is the answer to situations with bedrock, high
patented, ultra-shallow, full-rise scissor in-ground lifting
ground water or other difficult soil conditions.
system. Manufactured in Streator, Illinois, ECOLIFT is
safe, reliable and durable.
Easy Installation
Not only is the installation depth extremely low, the ECOLIFT
Ultra-Shallow Construction
arrives on site pre-assembled and tested.
The shallow ECOLIFT foundation has a depth of less than
ECOLIFT is a drop-in/bolt-in design, which makes the
half of the total lifting height. The lift foundation does not
installation a breeze. Additionally, the ECOLIFT is the only
require any lift components to be embedded in concrete,
re-locatable in-ground lifting system in the world.
which minimizes time and expense. Finally, this shallow
Continuous Recess™
Utilizing the Continuous Recess™ system, the ECOLIFT
The pit covers are made from anodized aluminum and are
is designed to accommodate vehicles with extremely
equipped with a skid resistant surface. The covers are capable
low ground clearances. The moveable lifting mechanism
of handling a wheel load of 13,500 lbs. as well as a point load
can recess below floor level anywhere within the range of
of 7,500 lbs. on a 2 x 2 inch contact ares, as would occur
travel.
with a support stand leg.
Unique
design provides
maximum
productivity
Innovative Design
a provision to restrict the maximum lifting height.
The covers are driven hydraulically with an inverted
“The ECOLIFT can be supplied in 2- and 3-lifting unit
rack and pinion system, sliding on a corrosion-
versions. The available ranges of horizontal travel for
resistant, self-cleaning surface. An industry proven
ECOLIFT moveable lifting units are 120 inches, 156
control system, with electronic synchronization
inches and 204 inches. This flexibility allows service
utilizing real-time feedback, ensures smooth and safe
of vehicles including articulated buses, fire and rescue
operation. As standard, the control system includes
vehicles as well as multiple axle trucks.”
Maximum Safety
The ECOLIFT is designed with a robust mechanical
locking system, independent of the hydraulic cylinder.
The mechanical locking system is active throughout the
lifting range. When lowered into the locks, the vehicle
is fully supported, with no pressure remaining in the
hydraulic system.
The unique lifting scissors are fabricated from 2 inch
thick, high strength steel, providing an unparalleled level
Ready for the future
of stability and safety.
With its high lifting capacity, movable front lifting
mechanism in a continuous recess, and broad range of
ECOLIFT utilizes high pressure, low volume cylinders
adapters, the ECOLIFT is suitable for a diverse vehicle
requiring only 3.5 gallons of hydraulic fluid each, which
fleet. Additionally, since the ECOLIFT is drop-in/bolt-in,
reduces the carbon foot print of this revolutionary product.
it is easily relocated.
The ECOLIFT
lifts any fleet
Options
- Detachable, Wired Remote Control: Full function
remote control, with emergency stop, operates in
addition to standard controls on the console and
is fully approved for use on the workshop floor.
The result: convenient and safe spotting of the lift
to the vehicle.
- Adapters: Standard selection included.
Special adapters are available.
- Adapter stand: For safe and easy storage of adaptors
and cover plates.
- Bio degradable hydraulic fluid
- Automatic wheel base positioning: The ECOLIFT can
be equipped with a system that stores wheel base
positions for easier lift set up. The user friendly LCD
screen stores up to 16 positions, which in turn allows
precise relocation of the moveable lifting unit with the
touch of a button, significantly reducing setup time.
- Special lift configurations are available.
Travel range
Centerline spacing
34"
Travel range
Travel range
Rear centerline spacing
Front centerline spacing
70"
34"
34"
Travel range
Centerline spacing
Specifications ECO 60 Lifting capacity
60,000
ECO 90
90,000
Lbs
Lifting height
70
Inch
Pit depth
34
Inch
Travel range
10, 13, 17
72
Inch
Lifting time
90
Sec
Filtered/regulated
for 90 PSI at 5CFM
Electrical
208-230/460/575
Motor power
2 x 5
For more specific information about the ECOLIFT
or one of the other quality products from Stertil
Koni, please contact us for further assistance.
Ft
Minimum wheelbase
Compressed air
More information?
Volt
3x5
HP
34"
* Technical specifications are available at: www.stertil-koni.com
Travel range
Rear centerline spacing
Travel range
Front centerline spacing
Stertil-Koni U.S.A. Inc.
200 Log Canoe Circle
Stevensville, Maryland 21666
Tel. 410-643-9001
Toll free 800-336-6637
Fax 410-643-8901
www.stertil-koni.com
E-mail: [email protected]
A member of the Stertil Group
95003909 ECOLIFT USA 02-2013 / Stertil is a registered trademark of Stertil B.V.. We reserve the right to make changes in specifications without notice and without making changes retroactive.
Technical specifications