Solid carbide drill reconditioning

Solid carbide drill reconditioning
Reduce your hole costs
Wherever you are, whenever you need.
Reconditioning your solid carbide drills with Sandvik Coromant can save you up to 50% of
your total tooling costs, through a straightforward process and quick delivery times.
Just leave it to us.
A simple procedure
1. Inspect
Make your own visual inspection of your tools to
determine which drills can be reconditioned.
2. Contact us
Fill out the reconditioning order form
(www.sandvik.coromant.com/reconditioning) or call your
nearest Sandvik Coromant repre­sentative or distributor
for further instructions regarding shipping of your tools.
3. Pack and send
Pack and send your drills according to the ship­ping
instructions.
4. Technical inspection
Your drills will go through a technical inspection to
determine which ones we are able to recondition. The
tools that can not be reconditioned will be sent back to
you.
A fast return
Your fully reconditioned drills will be returned to you within
two to three weeks.
Benefits
• Top performance results
• Consistent high quality
• Cost efficient process
Tool cost
Performance
% as good as new.
50Tools
100%
Average tool cost %
80%
Money saved.
Reconditioning every solid carbide drill*
with Sandvik Coromant has a positive
effect on your average total tool cost.
60%
40%
Performance level is as good as new
and three repeated reconditionings can
actually save 50%!
20%
*Max. recommended: three reconditionings
New tool
0%
1
2
3
Reconditioning
Interested in reconditioning?
A tip for your visual inspection
Determining which tool can be sent for reconditioning is not an easy task.
We have two recommendations for you:
• Flank wear: maximum 4% of drill diameter
• Margin and crated wear: maximum 1.0 mm (0.04 inch) axial wear/chipping
≤ 1.0 mm
(0.04 inch)
≤ 4% Dc
≤ 1.0 mm
(0.04 inch)
Peace of mind
Successful metal cutting is a combination of certainty in tool management and unbeatable tool performance. It is the
driving force behind the Sandvik Coromant reconditioning service. Visit www.sandvik.coromant.com/reconditioning or
contact your nearest Sandvik Coromant repre­sentative or distributor for more information.
Head office:
AB Sandvik Coromant
SE-811 81 Sandviken, Sweden
www.sandvik.coromant.com
E-mail: [email protected]
C-2929:80 ENG/01 © AB Sandvik Coromant 2012.10