Sensor activation tool for manual and automatic line The VT520

VT520
Sensor activation tool
for manual and automatic line
FOR ALL TPM TYPES
EASY OPERATION
UP TO 4 RECEIVING
FREQUENCY
STRONG AND
WATERPROOF CASE
VT520 in a long case
Main Features
The VT520 combines
power and versatility and
can be used for all TPM
types. Its compactness
and its robustness also
make an essential industrial tool of it to activate all
kind of valves on the
same line.
2 versions LF/RF and RF/RF
2 case configuration (integrated or external antenna)
Memorize several types of valves
Adjustment of the power of emission
Interfacing through I/O TOR or RS232/485 interface
Set up with PC or WINATEQ software
Protection of the parameters by locked key
Weight: 4 kg
Case dimensions (integrated antenna)
H x L x P: 105 x 395 x 590 mm
Case dimensions (external antenna)
H x L x P: 105 x 395 x 200 mm
www.ateq.com
Start up
For all TPM types, parameters can be set from
VT520 front panel or with a PC and WINATEQ software.
The operator can regulate thresholds of monitoring
on differents parameters (Pressure, Temperature,
Acceleration...)
VT520 interfacing is made by 7 Inputs 5 outputs or
by RS232/485.
The data received from the valves (Number ID, P,
T...) can be collected by RS232/485.
ATEQ’s range of products
Maintenance smart tire pressure devices tester
Pocket size
Easy operation
Large graphic display
Li-Ion Battery
Strong ABS case
ATEQ VT60
USB interface
Manual production line unit
CAN vehicule network connector option
Large LI-ION battery capacity
LF/RF operation (RF/RF upon request)
Long “noze” version for stand-up operation
ATEQ VT
Also available without extra handle and
short probe