table oF contents

Comments

Transcription

table oF contents
>
HUNTINGTON DIE SPECIALTIES - 2014
Ta b l e o f C o n t e n t s
reloading presses
Reloading Presses, Kits, & Accessories...............................1-5
Compac Press, HDS................................................................ 5
Specialty Merchandise Information....................................... 51
powder handling tools
Reloading Scales, Electronic / Beam...................................5-6
Powder Measures / Tools.....................................................6-9
Bullet Feeding Systems........................................................... 9
case prep
Bullet Pullers, Collets / Kinetic............................................... 18
Case Cleaning Equipment / Tumblers / Sifters...................... 14
Case Lube Accessories / Lube Dies.................................13-14
Debur Tools............................................................................ 15
Die Wax, Imperial / Case Lube.............................................. 13
J&J Plastic Boxes.................................................................. 16
Load Blocks........................................................................... 15
Measurement Tools / Calipers..........................................17-18
Miscellaneous Accessories................................................... 15
Plastic Ammo Boxes.............................................................. 16
Precision Mics....................................................................... 17
Priming Accessories.........................................................10-13
Primer Sealant....................................................................... 13
Trigger Pull Scales / Gauges . ............................................... 17
books / dvd’s / PRODUCT INFORMATION
Books / Reloading Manuals / DVDs.................................18-21
RCBS Information Videos...................................................... 48
case trimming equipment
Case Trimming Equipment................................................22-27
Case Trimming, Forster.....................................................25-27
Neck Turning Systems / RCBS, Forster.................... 24, 25, 27
Neck Reaming Tools, Forster................................................. 27
Trim Dies.......................................................................... 28, 84
shell holders
Shell Holders, extended, shell holder rack...........29-30, 85, 89
Shell Holders, competition extended.............................. 30, 78
Shell Holders, plates.......................................29, 72-73, 77, 85
Shell Holder Table.................................................................. 89
bullet casting equipment
Bullet Casting Equipment...................................................... 31
Black Powder Cartridge Over Powder Wads........................ 32
Bullet Lube............................................................................. 31
Gas Checks, Hornady, Gator................................................. 34
Marvelux, Brownells............................................................... 31
Neck Expanding Dies / Plugs.................................... 32, 77, 85
bullet moulds
Bullet Moulds, Pistol / Rifle / Round Ball.............. 32-33, 80-84
Lube Sizer Dies (LAM)................................................34, 80-84
Top Punches...............................................................34, 80-84
Reference Section
RCBS Cross-Reference Chart..........................................72-73
Forster Cross-Reference Information.................................... 70
RCBS Dies (All).................................................................74-79
RCBS Bullet Mould Data..................................................80-84
RCBS Case Trimmer Pilots / Shell Plate................................ 85
RCBS Rotor Charge Table, Little Dandy................................ 71
RCBS Shell Holder Plates...................................................... 85
RCBS Shell Holder Cross-Reference Chart.......................... 89
RCBS Dies
Standard Reloading Dies (Group A-E).................. 35-36, 74-76
AR Series Dies / TC Seating Dies ......................................... 37
Competition Die Sets....................................................... 39, 78
Cowboy Action Shooting Dies (CAS)............................... 38, 78
Cowboy Shotshell Dies.......................................................... 38
Legacy Series Dies.......................................................... 37, 78
Safari Series Dies............................................................. 37, 79
50 bmg, 416 Barrett, 460 Steyr Dies, Large Caliber......... 38, 76
Neck Die Sets / Neck Sizer Dies.......................................41-42
Small Base Sets / Small Base Sizers................................42-43
Die Replacement Parts.......................................................... 43
Expander-Decap Units...............................................43, 74-79
Hornady Carbide Expander Assy........................................... 43
Dies - SPECIAL ORDER
Reloading Dies X Dies / Sizers...................................40, 78-79
Reloading Dies (Group G-X).............................................44-48
Reloading Dies Lazzaroni ..................................................... 48
Case Forming Dies...........................................................49-51
Neck Ream Dies.................................................................... 51
Special Order Pricing (Group G-X)......................... see price list
SPECIALIZED Dies
Decapping Dies..................................................................... 11
Hornady Blank Die Set.......................................................... 38
Lock Out / Powder Checker Die.............................................. 9
Lube Des................................................................................ 14
Specialty Merchandise Information....................................... 51
Trim Dies.......................................................................... 28, 84
Bullets
Barnes Bullets...................................................................59-60
Custom Jacketed Bullets....................................................... 62
Graf Bullets............................................................................ 62
Hornady Bullets................................................................54-56
Nambu 8mm Plated Lead Bullets (HDS)................................ 62
Nosler Bullets....................................................................52-53
Remington Bullets, Rifle, Pistol............................................. 61
Sierra Bullets.....................................................................58-59
Speer, CCI Specialty Products.............................................. 62
Woodleigh Bullets.............................................................56-57
Cases
Bell Cases.............................................................................. 68
Bertram Cases....................................................................... 64
Graf Cases, (PPU).................................................................. 64
Hornady Cases...................................................................... 68
Hornaber Cases..................................................................... 68
Jamison Cases...................................................................... 64
Lapua Cases.......................................................................... 65
Magtech Cases (CBC)........................................................... 65
Norma Cases......................................................................... 65
Remington Cases, Rifle, Pistol, Nickel.............................66-68
RWS Cases............................................................................ 68
Single Bullets & Cases........................................................... 68
Speer, CCI Specialty Products.............................................. 62
Starline Cases........................................................................ 64
Weatherby Cases................................................................... 65
Winchester Cases.................................................................. 65
Order Form.......................................................................... 87
NOTES................................................................................... 63
Toll Free Order Line 1-866-735-6237
ORDERING INFORMATION
REFERENCE SECTION
1
< TOC >
reloading presses & accessories
RELOADING PRESSES
Pro 2000 Progressive Press
The Pro 2000 is an easy to use five station manual
indexing progressive press. Simply insert a cartridge
case and bullet, cycle the handle and index the shell
plate. The five station design allows for the use of a
Powder Checker or Lock-Out die or you can seat
bullets and crimp cases in separate operations. You can
use APS or tube priming systems that eliminates primer
spills. The quick change die plate allows
you to leave dies set for quick caliber
changeover and will accept any standard
7/8”–14 threaded dies. The Uniflow
Powder Measure coupled with the Case
Activated linkage system means powder
charges will be dispensed accurately and
only if a cartridge case is present! The
large working window and Universal Case
Retention system allows easy removal
and insertion of cases at any station.
Compound leverage makes resizing rifle
and pistol cases effortless. The rugged
cast iron frame will provide a lifetime of service and the
RCBS warranty guarantees it! (dies not included).
Part #
88875
88877
88876
88878
88879
specify
Description
Pro 2000 Auto-Index Progressive Press
Pro 2000 Auto Indexing Press Upgrade Kit
Part #
88883
Description
Pro 2000 Auto-Indexing Upgrade Kit
In the manual progressive mode, output
can be increased from 50 to 200 rounds per
hour. Or, if preferred, the press can be used
as a single-stage press and load cases in
the batch mode. Operating window 4-1/2”
Rugged, cast iron frame, toggle block and
turret head. Heavy-duty construction to
minimize springing. Detent on Turret Head
for positive alignment. Standard 7/8”-14
threads for most popular reloading dies
and accessories. Six-Station Turret Head
allows many combinations in the mounting
sequence of dies and powder measure
permits two or more calibers to be set up at
the same time. Turret Head held in place by
one bolt for quick, easy change-overs. Turret Pin Assembly (provided for
turret head removal and installation) and Ball Handle Assembly may be
positioned for right or left-hand use. Standard Shell Holders slip into press
ram and are securely held in place by a clip spring. (dies not included).
NOTE: We highly recommend the optional Uniflow Powder Measure with
Case Activated Linkage Kit for use on the Turret Press (sold separately).
See page 6, 8. (Dies and Accessory Base Plate-2 not included).
Contents: Turret Press, Uniflow Powder Measure,
Model 502 Reloading Scale, Speer #14 Reloading
Manual, Case Lube Kit-2, Deburring Tool, Universal
Case Loading Block, Fold-up Hex Key Wrench Set,
Primer Tray-2, & Powder Funnel.
Part #
88907
Description
Turret Deluxe Reload Kit
Turret Head
Makes changing calibers quick and simple. Leave
the dies set up in the Turret Head and change the
Head- one bolt does the trick! Six stations with
standard 7/8”-14 threads. (dies not included).
Part #
88902
Description
Turret Head
Pro 2000 / Piggyback Die Plate
Make caliber changes quickly and easily. Leave the
reloading dies set up. Eliminates the need to install
and adjust dies for each reloading session.
Part #
88877
2
Description
Turret Press
With this kit you’ll only need to add a Reloading Die
Set and Shell Holder for the caliber(s) you intend to
reload. Information on each individual kit component
is described elsewhere in this catalog. Buy the kit and
save about 10% of the price of each item separately.
Take your reloading to the next level with the
RCBS Pro 2000 Auto Index Press. Five station
automatic indexing for maximum production in
shorter sessions with a load rate of approximately
600 rounds per hour. APS priming for the safest,
most convenient priming system on the market.
Case activated powder measure stops accidental
spillage while the case retention system provides
quick access to cases. Quick change die plate for
fast caliber change over. Ability to change primer
sizes in less than a minute. Uniflow Powder Measure, APS Strip Loading
Tool, 32 empty APS Strips, bullet tray, empty brass bin and loaded ammo
bin included.
The Auto-Indexing Upgrade Kit
allows you to convert a manual
indexing Pro 2000 (#88875) to
automatic indexing operation.
Simple operation- no complex or automated
processes. You have complete control over
every reloading step. May be operated in
progressive or single-stage mode.
Turret Deluxe Reloading Kit
Pro 2000 Auto Indexing Press
Part #
88882
RCBS Turret Press
Part #
88901
Description
Pro 2000 Progressive Press
Pro 2000 Die Plate
Pro 2000 Tube Priming Kit
Pro 2000 Star Wheel
Low Primer Detector Kit
Shell Plates (page 29, 72-73, 77, 85)
HUNTINGTON DIE SPECIALTIES - 2014
Description
Pro 2000 / Piggyback Die Plate
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
Summit Single Stage Reloading Press
RELOADING PRESSES
Unlike other presses, the Summit operates on top
of the bench; the case does not move, the reloading
die comes down to the case. Its all-steel linkage and
cast iron frame provide the stability and ruggedness
all reloaders need. The ambidextrous design allows
unprecedented access to your
cases, and you can quickly
change dies. The Summit also
offers compound leverage, a
massive 2-inch diameter ram,
full frontal access, a press
adapter bushing, zerk fitting for
lubrication, spent primer catcher
and
4-1/2-inch
operating
window for convenient access.
It accepts removable die
bushings for 1-inch die bodies
and is made in the USA.
AmmoMaster-2 Single Stage Press
The AmmoMaster-2 single stage press has been
improved with the installation of the longer support columns and larger toggle block to load the
longer 50 bmg cartridge (as found on the AmmoMaster 50 bmg Pack). While still set up to use
standard 7/8”-14 thread dies and standard shell
holders to load most any pistol or rifle caliber.
The addition of the 50 bmg 1-1/2” Die Kit (88705)
will allow you to load the 50 bmg. Top plate
threaded diameter 1-1/2”. This single stage
press offers you all the clearance, strength and
leverage that you need to load, form cases, and
bullet swage. Includes Ram Priming Unit #9165.
(dies not included). Operating window 6”.
Part #
88703
86767
Description
AmmoMaster-2 Press
Dustcover
Part #
9290 9291 AmmoMaster 50 BMG Pack
Description
50 BMG Pack
Standard Shell Holder Adaptor
AmmoMaster Fifty Kits
PRESS CONVERSION KIT
For original AmmoMaster-1 owners
wishing to load 50 bmg, two kits are
necessary. The 50 bmg 1-1⁄2” Press
Conversion Kit* and the 50 bmg
1-1⁄2” Die Kit.
The Press Conversion Kit* is used
to change an AmmoMaster-1 Single
stage press over to use the 1-1/2”
50 bmg dies. The kit contains the larger toggle block, support columns, top
plate, 50 bmg Shell Holder and 50 bmg Ram Priming Unit.
50 BMG
DIE KIT
The Die Kit contains a Full Length Size Die, Roll
Crimp Seat Die, Trim Die, 50 bmg Shell Holder
and .50 bmg Ram Priming Unit.
Part #
Description
88709* 50 BMG 1-1⁄2” Press Conversion Kit*
88705 50 BMG 1-1⁄2” Die Kit
*This kit is not needed for the AmmoMaster-2.
AmmoMaster Auto / Piggyback-II Die Plate
This replacement top plate allows you to have additional calibers set up and ready when making caliber
changes. It is complete with five station top plate,
clutch bearing with bushing, cam wire clip with lock
nut and setscrew. (dies not included).
Part #
88799 SHORT HANDLE
FOR SUMMIT
PRESS
Description
Summit Single Stage Reloading Press
Short Handle for Summit Press
Explorer Reloading Kit
The AmmoMaster 50 bmg Pack makes reloading for
the 50 bmg cartridge a simple task. Manufactured
to accept RCBS 1-1⁄2” 50 bmg dies, along with
the massive 1-1/2” solid steel ram, provides more
than enough strength to handle the 50 bmg and will
provide a lifetime of service. This kit includes the
AmmoMaster-2 press, 50 bmg Full-Length Sizer,
Seater Die, Shell Holder, Ram Priming Unit and Trim
Die in one convenient box.
Part #
88700
88715 reloading presses & accessories
Description
AmmoMaster Auto / Piggyback-II Die Plate
Includes:
Reloader
Special-5 Press with
Cast Aluminum “O-type”
compound
leverage
press with and 4.375”
operating window and
an 3.375” ram stroke,
Hand Priming Tool,
1500 Grain Digital Mini
Scale, Uniflow Powder
Measure with Small &
Large Cylinders, Case
Slick
Spray
Lube,
Deburr Tool, Powder
Funnel,
Nosler
7th
Edition Reloading Manual. A portion of the proceeds go to support youth
hunting and shooting programs. Limited manufacturers warranty.
Part #
9286
Description
Explorer Reloading Kit
Explorer Plus Reloading Kit
Includes: Reloader Special-5 Press with Cast Aluminum “O-type” compound leverage press with and 4.375” operating window and an 3.375”
ram stroke, APM Stand, Hand Priming Tool, Stainless Steel Caliper, Pow’r
Pull Kit, 1500 Grain Digital Mini Scale, Powder Trickler-2, Uniflow Powder
Measure with Small & Large Cylinders, (6) Extra Die Lock Rings, Case
Slick Spray Lube,
Deburr Tool, Powder Funnel, (5) Shell
Holders #2, #3, #4,
#10, #43, Nosler 7th
Edition
Reloading
Manual. A portion of
the proceeds go to
support youth hunting and shooting programs. Limited manufacturers warranty.
Part #
9287
Description
Explorer Plus Reloading Kit
Toll Free Order Line 1-866-735-6237
3
< TOC >
reloading presses & accessories
RELOADING PRESSES
RCBS Rock Chucker Supreme Press
The most popular reloading press just
got better! The Rock Chucker press
has been lengthened to allow easy
loading of today’s longer cartridge
designs and renamed The Rock
Chucker Supreme. With the same
easy operation, ambidextrous handle,
4-1/4” operating window, the Rock
Chucker Supreme is ideal for the
beginner and pro alike.
Part #
9356
Press Maintenance Kit
Keep your reloading gear in pristine condition with the RCBS Press
Maintenance kit. Outfitted with the
necessary chemicals and brushes
to clean reloading presses, this kit
is perfect for removing dirt, oil and
other debris from every nook and
cranny. It also comes equipped with
special chemicals and oils designed
for safe, long-term storage of your
reloading equipment.
Part #
99971 4
Description
Press Maintenance Kit
Description
Reloader Special-5
This offers the reloader
a medium priced quality
press and accessories to
start the new reloader with
the equipment that they
need. This unit consists
of the Reloader Special-5
Press, 505 Reloading
Scale, CaseLube Kit2, Speer #14 reloading
Manual, Universal Case Loading Block, Primer Tray and Powder
Funnel. (dies not included).
RCBS has taken the new benchmark of
single stage presses and surrounded it with
the equipment you need (except dies and shell holders) to start
loading like a pro. A simple solution for the beginner and pro alike.
The Rock Chucker Supreme Master Reloading Kit includes: Rock
Chucker Supreme Press, 505 Scale, Uniflow Powder Measure,
Speer #14 Reloading Manual, Hand Priming Tool, Hex Key Set,
Universal Case Loading Block, Case Lube Kit-2, Powder Funnel
and deburring tool. (dies not included).
Description
RC Master Supreme Reload Kit
This is the press that replaced the
Reloader’s
Special-3.
The
same
dependability but with the additional
feature of allowing you to use shotshell
dies with this press. The unit frame is
offset 30 degrees for an unobstructed
front access. Its all-aluminum frame is
made with a 48,000-psi aircraft type alloy.
The press offers the famous Block “O”
Design, which provides the strength of
design, and a removable press adapter
bushing. Operating window 3-3/4”.
Reloading Starter Kit
RCBS Rock Chucker Supreme
Master Reloading Kit
Part #
9361
RCBS Reloader Special-5 Press
Part #
9285
Description
Rock Chucker Supreme Press HUNTINGTON DIE SPECIALTIES - 2014
Part #
9046
Description
Reloading Starter Kit
RCBS Partner Press
This is the most inexpensive reloading
press that RCBS offers. As with other
RCBS presses, this press has the Block
“0” Frame compound leverage and
RCBS quality. The press handles the
standard 7/8”-14 dies, standard RCBS
accessories and standard shell holders.
Part #
87460
Description
Partner Press
RCBS Partner Standard
Reloading Kit
This is the smallest of the
RCBS family of starting
kits. The Partner Standard
Reloading Kit consists of
the Partner Press, 502
Scale, Case Lube Kit2, Speer #14 Manual,
Universal Loading Block,
Primer Tray, Deburring
Tool, and Powder Funnel.
(dies not included).
Part #
87467
Description
Partner Standard Reloading Kit
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
RELOADING PRESSES & ASSY.
HDS Compac Tool
This unit is designed with the Back
Packer, Black Powder Shooter, Bench
Rest Shooter, and those that require
a small portable reloading tool. This
unit is made with high quality aircraft
aluminum and steel parts. This
unit accepts any 7/8”-14 dies and
standard shell holder heads. The tool
works especially well with window
type seating dies. The unit can be
mounted on a bench. Physical size
3-1/2” x 9”. Made in the U.S.A.
Part #
89100
This combo is unmatched for a combination
of speed and accuracy. Dispensing time
has been cut in half over anything now
on the market. It can dispense from 2 to
300 grains with an accuracy of + or - of
1/10th of a grain. You can store up to 30
favorite loads in memory. It can dispense
in grains or grams. It includes a powder
drain feature to empty the powder from
the hopper.
Part #98923 Combo is the ChargeMaster
Dispenser and the 1500 Scale.
made in the usa
Description
HDS Compac Tool
If you are tired of breaking the plastic
primer catcher on your Rock Chucker,
JR or RS-3 presses, this is the ideal
replacement. Cast from aluminum from
the original design, and designed to be
held onto the press with a rubber band. This is a must for the
serious reloader. It will not fit Rock Chucker Supreme.
Description
Aluminum Primer Catcher
RCBS Equipment Covers
These covers protect your reloading
press & powder measure from dust.
Ensure proper functioning of your
equipment by eliminating dust and
abrasives that prevent accurate
measurements. All sizes available to fit most presses, powder
measures and miscellaneous reloading machines.
Part #
86881
86767
86880
9075
Description
Standard Press Equipment Cover
Progressive Press Equipment Cover
Powder Measure Equipment Cover
Scale Cover - 502, 505, 510 Scales
Arbor Die Conversion Kit
POWDER HANDLING TOOLS
RCBS ChargeMaster Combo
HDS Aluminum Primer Catcher
Part #
89301
reloading presses & accessories
NOTE: Use with smokeless powder only.
Do NOT use with black powder!
Part #
98923
98924
Description
ChargeMaster Combo 120v US
ChargeMaster Combo 240v Eur
RCBS ChargeMaster 1500 Scale
This is a high performance scale. It has a
1500 grain capacity, with accuracy of + or 1/10th of a grain. Two calibration weights are
included along with an AC adaptor. It can be
operated independently or upgraded into a
fully automated powder dispensing system.
One year limited warranty.
Part #
98920
98921
Description
ChargeMaster 1500 Scale 120v US
ChargeMaster 1500 Scale 240v Eur.
RCBS RangeMaster 750 Scale
It is compact and light for easy portability.
The large display is easy to read. It is +
or - to a 1/10th of a grain of accuracy.
You can weigh up to 750 grains. The
RangeMaster comes with two precision
calibration weights and an AC adaptor (or
you can use a 9 volt dc battery). One year limited warranty.
Part #
98927
98926
Description
RangeMaster 750 Scale 120v US
RangeMaster 750 Scale 240v Eur.
RCBS RC 130 Scale
Get even more from the RCBS Summit singlestage reloading press with the new Arbor Die
Conversion Kit. By replacing the Summit’s
standard die bushing and shell holder adapter,
the kit creates two flat, parallel mounting surfaces—ideal for benchresttype arbor dies. The Arbor Die Conversion Kit comes with a limited
lifetime warranty and is made in the USA.
Features & Benefits
• Kit contains an Arbor Die Bushing and Arbor Shell Holder that replace
the standard parts in the Summit single-stage reloading press
• Flat, parallel surfaces created by the replacement parts accommodate
benchrest-style arbor dies
• Limited lifetime warranty
• Made in the U.S.A.
Part #
Description
9294
Arbor Die Conversion Kit NEW
Here
is
an
inexpensive,
accurate, simple to use scale. It
has a capacity of 130 grains and
an accuracy of + or - 1/10th of
a grain. Utilization of magnetic
dampening, 3-poise design, and legible increment marking make this
scale very easy to use and the best in its price class.
Part #
90400
Description
RC 130 Scale
Toll Free Order Line 1-866-735-6237
reloading scales, contd
5
< TOC >
powder handling
POWDER HANDLING TOOLS
Model 502 Scale
This unit offers a 505-grain
capacity with a 3 poise system.
The scale is magnetically
dampened and offers knifeedge beam supports on agate bearings for perfect balance. It has an
approach to weight indicator with an easy to pour scale pan. Sensitivity
is + or - 1/10th of a grain.
Part #
9069
Description
502 Scale
Model 505 Scale
This is the mid-line scale in the
RCBS line. It has the 511-grain
capacity with a 3-poise system.
The scale is magnetic dampened
and offers knife-edge beam
supports on agate bearings for perfect balance. It has an approach to
weight indicator with an easy pour scale pan. Sensitivity is + or - 1/10th
of a grain.
HUNTINGTON DIE SPECIALTIES - 2014
RCBS Scale Check Weights
Reloaders rely upon their powder scales
to accurately weigh safe powder charges
and check the charges thrown by their
measures. Correct readings are essential to
safe reloading. If a scale is not covered, dust
or bits of materials can accumulate in the
bearings and go unnoticed. Scales can be
STANDARD SET
dropped or hit. A quick check with accurate
Check Weights for the range you are loading
will assure you correct scale information
and give you peace of mind. RCBS offers
two sets of Check Weights. Both sets are
graduated in grains to avoid the user having
to make any conversions. Both sets include
DELUXE SET
a storage container. The Standard Set has a
total of 8 pieces giving a total weight of 60.5 grains. The Deluxe Set of
13 pieces has a total weight of 510.5 grains and includes a set of forceps.
Part #
98990
98992
Description
Standard Check Weight Set
Deluxe Check Weight Set
Case Activated Linkage Kit
This unit offers a capacity of
1010 grains with a poise system
using a micrometer on the
grain calibrations. The scale is
magnetic dampened, has the
knife edge beams on agate bearings, and the scale has an approach to
weight feature, and an easy pour pan. The unit comes with its own plastic
cover that locks onto the frame for dust-free storage. Sensitivity is + or 1/10th of a grain.
Convert the Uniflow Powder Measure (not included)
for use on most four or five-station progressive
presses. The Uniflow Powder Measure can have the
regular Measuring Screw or the optional Micrometer
Adjustment Screw installed, depending on your
preference. Three powder bushings are included for
most popular rifle and pistol calibers: Small Rifle
for .22 through .270 calibers, Large Rifle for 7mm
through .45 calibers and Pistol for .32 through .45
calibers. The powder bushings are designed to
eliminate powder spillage around the case mouth.
Fully adjustable for all of the different variations in
case length.
Part #
9073
Part #
98911
Part #
9071
Description
505 Scale
RCBS 1010 Scale
Description
1010 Scale
RCBS Black Powder Measure
RCBS Replacement Parts for Scales
This unit has a one-pound capacity aluminum
powder hopper and cap, with a non-static powder
level indicator. The indicator tells you how much
powder you have left in the hopper. This measure
has a brass non-sparking metering cylinder and
adjustment screw. The maximum charge capacity is
120 grains. You can also purchase the optional 24”
aluminum drop tube, which is a big help in getting all
the powder into the case. It comes with the RCBS
lifetime warranty.
We carry a complete line of replacement parts
for RCBS scales. The one item that we don’t
carry is the beam for RCBS scales. If you break
a beam, you must contact RCBS for it to be
replaced. You must send the complete scale
because they must rebalance the beam to the
base. The following are a few of the parts that
are most commonly replaced. If it is not listed
below, then you need to contact RCBS at
1-800-533-5000.
Part #
9078
9079
The RCBS Black Powder Measure is the perfect unit
for Black Powder and Cowboy Action shooters.
Description
Scale Pan 502, 505, 510,1010
Scale Pan Support 502, 505, 510, 1010
Scale Covers
RCBS offers Scale Covers to match their
scales. Keep in mind that the 1010 comes
with its own cover. But the 502, 505, & 510
have separate vinyl covers available for
them. These units are well made and worth
the investment to the reloader who leaves their scales on the bench.
Part #
9075
6
Description
Case Activated Linkage Kit
Part #
98842
98856
Description
Black Powder Measure
24” Aluminum Drop Tube
Description
Scale Cover - 502, 505, 510 Scales
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
POWDER HANDLING TOOLS
Is your powder funnel always missing when
you need it most? The new RCBS Scale Pan
Powder Funnel eliminates the problem. The
Scale Pan features an integrated powder funnel
that allows you to pour the powder directly into
the case. The new scale pan is designed for use
with electronic scales and powder dispensers.
Features & Benefits
• Improved performance & convenience over existing powder scale pan
• Integrated powder funnel to pour directly into cases
• Funnel will accommodate .22 to .50 caliber cases
• Made of anti-static polymers
• RCBS Lifetime warranty
Description
Pan Powder Funnel
RCBS Quick Change Powder Funnel
With the current trend of large bodied
rifle cases, existing powder funnels
sometimes do not fit properly over
the cases. The new RCBS Quick
Change Powder Funnel eliminates
that problem. The QC Powder Funnel
features adapters that are supported by
the body of the case and allow you to
choose the optimum powder flow. The
4 drop tubes are stackable so you can
increase the drop length if necessary. With the adapters removed, the
powder funnel allows you to return the powder into the original container
quickly.
Features & Benefits
• Improved performance and convenience over existing powder funnels
• Fits WSM, WSSM, and Ultra Mag cases
• Stackable Drop Tubes
• Made of anti-static polymers
• RCBS Lifetime Warranty
Part #
9190
9192
9193
9194
9195
9196
Description
Quick Change Powder Funnel Kit (funnel, 5 adapters & 1 drop tube)
QC Adaptor .17-.20
QC Adaptor .22-.264
QC Adaptor .270-7mm
QC Adaptor .30-.375
QC Adaptor .40+
RCBS Powder Funnel
One of the necessities that the reloader needs on
his bench is the Powder Funnel. RCBS offers one
for .17 caliber and one for .22 to .45 caliber. They
are made of space age plastic and designed not
to roll off your bench. Use it to avoid powder spills
around the case mouth.
Part #
9086
9087
Description
.17-.20 Caliber Powder Funnel
.22-.45 Caliber Powder Funnel
RCBS Quick Change
Powder Measure
The RCBS Quick Change Powder Measure offers the
ability to go from light pistol to magnum rifle charges
quickly. The QCPM features metering assemblies
that change out with the pull of a pin. Extra metering
assemblies can be purchased to have them preset
for your favorite smokeless powder charges. The
drain attachment empties the powder hopper without
the need to remove it from the stand or press. *The
Quick Change parts can be used to upgrade any
Uniflow powder measures to this system.
RCBS Scale Pan Powder Funnel
Part #
9090
powder handling
Features & Benefits
• Improved convenience over existing powder
measures
• 1-pound powder hopper capacity
• Cast Iron Body
• Small metering assembly handles charges from .5 to 40 grains
• Large metering assembly handles charges from 10-110 grains
• Drain attachment empties the hopper quickly
• Quick Change parts can be used to upgrade existing Uniflow
Powder Measure
• RCBS Lifetime warranty
NOTE: Do NOT use with black powder!
Part #
98840
98843 98844 98845 98846 98855 Description
Quick Change Powder Measure
QC Metering Screw Assembly- Small*
QC Metering Screw Assembly- Large*
QC Metering Cylinder*
QC Drain Attachment*
QC Drop Tube Adapter* RCBS Quick Change
High-Capacity Powder Measure
The RCBS High-Capacity Quick Change Powder
Measure offer the ability to dispense large rifle
charges of up to 240 grains of smokeless powder.
The QCHCPM features metering assemblies that
change out with the pull of a pin. Extra metering
assemblies can be purchased to have them preset
for your favorite charges. The drain attachment
empties the powder hopper without the need to
remove it from the stand or press.
Features & Benefits
• Improved performance and convenience for
dispensing large rifle charges
• 2-pound powder hopper capacity
• Cast Iron Body
• Metering assemblies handles charges from
5 to 240 grains
• Drain attachment empties the hopper quickly
• RCBS Lifetime Warranty
NOTE: Do NOT use with black powder!
Part #
98841
98849 98850 98852 98853 98854 Description
QC High-Capacity Powder Measure
QC HC Metering Screw Assembly QC HC Drain Attachment QC Drop Tube .22-.270 QC Drop Tube .30-.45 QC Drop Tube .50 powder measures, contd
Toll Free Order Line 1-866-735-6237
7
< TOC >
powder handling
POWDER HANDLING TOOLS
RCBS Uniflow Powder Measure
The RCBS Uniflow Powder Measure is the standard
of the industry. The measuring cylinder has precision
ground surfaces and slides into the honed main
casting. If you are loading in quantity, this is volumemetering device that will do the job right. It comes
with large and small drop tubes. The large rifle
cylinder goes from 10 to 110 grains; the small pistol
cylinder goes from .5 to 40 grains.
NOTE: The Uniflow Powder Measure should be used
in conjunction with an accurate powder scale for
setting the original charge and for checking charges
occasionally during the run.
Description
Uniflow Powder Measure w/Large cyl.
Uniflow Powder Measure w/Small cyl.
Measure Cylinder Assembly, Small
Drop Tube - xsmall .17-.20 cal (steel)
Drop Tube - small .22+
Drop Tube - large
UPM Hopper Cap
QC Drop Tube Adaptor
How do you make the best product better? RCBS just
did. Now you can obtain a Micrometer Adjustment Screw
for your Uniflow Powder Measure. This unit fits in either
cylinder and is easy to install. First remove the standard
metering screw, lock ring, and cylinder bushing. Then
replace these items with the micrometer adjustment
screw. This allows you to record the micrometer reading
for a specific charge of a given powder and by using the
micrometer, you can return to that setting at a later date
when the charge is again being used. There may be a
variance due to change of powder lot, humidity and other
variables, but the setting will be very close and save you
considerable set-up time. This is a must for the serious
reloader.
Part #
98901
98902
NOTE: Do NOT use with black powder!
Description
UPM Micrometer Adjustment Screw-Large .685”
UPM Micrometer Adjustment Screw-Small .500”
RCBS Uniflow Powder Measure Cover
Description
Little Dandy Powder Measure
When you want to leave your powder measure set up on your
bench, here is the Dust Cover you need for either short term or
long-term storage. Made of good quality vinyl, this unit is a nice
accessory on any bench.
RCBS Little Dandy Pistol Powder
Measure Rotors
Rotor #
Part #
Rotor #
Part #
Rotor #
Part #
0
86035
9
86009
19
86019
00
86036
10
86010
20
86020
1
86001
11
86011
21
86021
2
86002
12
86012
22
86022
3
86003
13
86013
23
86023
4
86004
14
86014
24
86024
5
86005
15
86015
25
86025
6
86006
16
86016
26
86026
7
86007
17
86017
8
86008
18
86018
Description
Little Dandy Measure Rotor
Little Dandy Rotor Knob
Description
Comp. Powder Measure Combo
Competition Powder Measure Pistol
Competition Powder Measure Rifle
RCBS UPM Micrometer Adjustment Screw
This unit is at home on the reloading bench or in a
progressive tool. The Little Dandy is offered with 28
different rotors giving you the range of 2.5 grains of
Bull’s-Eye to 25 grains of 296. When you are volume
reloading this is the answer to a prayer. It is fast,
economic, reliable, and accurate. It offers quick
changeovers with no re-adjustments and comes
bench mounted or hand held, which ever you prefer.
Part #
specify
86046
With the proven Uniflow Measure as the base, RCBS
precision grinds both the casting and the cylinder,
then they add the Micrometer Adjustment screw
for precise adjustments in metering your charges
as well as allowing you to record the number for
future reference. Then they add the powder baffle
to improve the flow of powder into the cylinder. The
large rifle cylinder goes from 10 to 110 grains; the
small pistol cylinder goes from .5 to 40 grains.
The Combo Unit includes both the Rifle & Pistol
metering cylinders and complete UPM Micrometer
Adjustment screw assemblies.
Part #
98910
98908
98909
RCBS Little Dandy
Pistol Powder Measure
Part #
86040
RCBS Competition Powder Measure
NOTE: Do NOT use with black powder!
NOTE: Do NOT use with black powder!
Part #
9010
9002
9004
9028
9023
9022
9012
98855 HUNTINGTON DIE SPECIALTIES - 2014
Part #
86880
Description
Uniflow Powder Measure Cover
RCBS Advanced Powder Measure Stand
This stand will raise most Powder Measures
9-1/2” (with standard 7/8”–14 thread) leaving
plenty of space for positioning a powder scale
pan or cases in a loading block under the drop
tube. Bolts easily to a reloading bench or table.
Also serves as a stand for holding a Piggyback
II, Piggyback-3 or -4 when not in use.
NOTE: Not for use with Little Dandy Powder
Measure.
Part #
9092
Description
Advanced Powder Measure Stand
* See Reference Section for Rotor Charge Table (page 71)
8
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
POWDER HANDLING TOOLS
Powder Trickler-2
Today’s trend is to use electronic scales to measure
powder charges. Many of these scales have scale
pans that are positioned out of reach of existing
powder tricklers. The Powder Trickler-2 solves this
problem by adding a height adjustable, non-skid
base and powder tube extension.
The Powder Trickler-2 Upgrade Kit is designed to
convert your existing 9094 Powder Trickler to have
all of the added functions above.
Features & Benefits
• Variable height adjustment and longer Trickle Tube to accommodate
most electronic and mechanical scales
• Weighted Non-Skid Base for increased stability
• RCBS Limited Lifetime Warranty
Part #
9089 9093 Description
Powder Trickler-2 Powder Trickler-2, Upgrade Kit RCBS Powder Trickler System Combo
This is a new concept in powder dispensing.
This unit speeds up the process of weighing
your powder charges. It attaches to the
Uniflow Measure, or standard Quick Change
Powder Measure. It is used in conjunction
with the Advanced Powder Measure Stand.
This system allows you to dispense and trickle
a powder charge directly onto a scale pan
without removing the scale pan for an initial
filling. It is either right or left-handed. The
combo comes with the unit plus the advanced
stand. The Advanced Stand offers improved
clearance for your loading block.
Description
Powder Trickler System Combo (w/stand)
Advanced Powder Measure Stand
Description
Uniflow Powder Measure Baffle
QC Powder Baffle QC HC Powder Baffle Description
Lock Out Die
Description
Powder Checker
BULLET FEEDING TOOLS
Bullet Feeder - Pistol Kit
(Progressive Press only)
Designed to fit on most 7/8”-14 threaded progressive
presses the RCBS Pistol Bullet Feeder Kit features
a universal 110-240 vac operated collator unit that
orients the bullets to drop into the feed mechanism.
The hopper holds approximately (200) bullets. The
kit contains adapters to load 9mm/.38 Special/.357
Mag., 10mm/.40 & .45 ACP jacketed/ FMJ pistol
bullets. Load rate increased by 50%. Will fit other
progressive press brands. Patent pending.
NOTE: Not for use with lead-cast bullets. Use jacketed bullets.
• Hopper holds approximately 200 bullets
• Bullets are oriented to drop directly into feed
mechanism
• Adaptors allow loading of 9mm / 38 Special /
357 Mag, 10mm / 40 & 45 ACP jacketed/FMJ
pistol bullets
• RCBS two year warranty
• Plug adapters for USA, UK, AUS, and EU
included with CE approved power supply
• Increase load rate by 50%
• Adjustable collator height
Based on the popularity of the Pistol Bullet Feeder Kit, RCBS introduces
two rifle versions - 22-caliber and 30-caliber. Designed to fit on most
7/8”-14 threaded progressive presses (adapters may be required for
other brands), these Rifle Bullet Feeders each feature a universal 110240 vac operated collator unit that orients the bullets to drop into the feed
mechanism/seat die. The hopper holds approximately (250) 22-caliber
bullets and (100-125) 30-caliber 180-grain bullets. Each kit increases load
rates by 50%. Will fit other progressive press brands. Patent pending.
NOTE: Not for use with lead bullets. Use jacketed or FMJ bullets only.
Features & Benefits
When you are using a progressive press, it’s easy to get
an incorrect powder charge. The Lock Out Die detects “no
powder charge” and “double powder charge” situations.
This die is used for pistol calibers and installs in the die
station after the powder charging station.
Part #
87540
Part #
87590
Bullet Feeder - Rifle Kit
Uniform loads require a consistent powder charge
and many handloaders find a baffle helps them throw
more consistent charges. The baffle was specifically
designed for the RCBS Powder Measures and
provides handloaders a uniform powder flow by
controlling the gravity feed pressure of the powder
column on the metering unit.
Lock Out Die
This is a nice accessory for the volume reloader. This unit
fits on the 4x4, and the Pro 2000. It is designed to tell you
when you have the correct powder charge in the case,
before you seat the bullet. The unit is placed between the
powder charging and bullet seating stations.
Part #
Description
82350 Bullet Feeder- Pistol Kit
RCBS Powder Measure Baffle
Part #
90225
90226 90227 RCBS Powder Checker
Features & Benefits
NOTE: Not for use with Quick-Change High Capacity, Little Dandy, or Black Powder Measure.
Part #
9091
9092
powder handling
• Available for either .22 or .30 caliber
• Increases load rate by 50%
• Large hopper for non-stop reloading and max output/efficiency
• Bullets are oriented to drop directly into feed mechanism/seat die
• Plug adapters for USA, UK, AUS. and EU included with CE
approved power supply
• Adjustable collator height
• RCBS Two year warranty
Part #
Description
82352 Bullet Feeder- .22 caliber Rifle Kit
82354 Bullet Feeder- .30 caliber Rifle Kit
Toll Free Order Line 1-866-735-6237
9
< TOC >
case prep
PRI M ING ACCESSORIES
RCBS Universal Hand Priming Tool
Are you inconvenienced by having to
use “special” shell holders for your hand
priming tool? The new RCBS Universal
Hand Priming Tool (UHPT) eliminates that
problem. The UHPT features a Universal
Shell Holder system that will accept cases
from .32 ACP to .45-70 Gov. Simply install
the appropriate size screw-in primer plug,
fill the primer tray, insert it into the tool and
you are off and priming! The ergonomic
grip is comfortable to use by right or left
handed users. The Primer Seating Safety Gate isolates the primer being
inserted from the primer supply in the tray.
Features & Benefits
• Improved performance & convenience over existing hand priming tools
• Universal Shell Holder eliminates the need for multiple or different
types of shell holders for each cartridge.
• Primer Seating Safety Gate
• Easily removed primer tray for quick primer refills
• Redesigned primer tray accommodates all brands of primer packaging
• Screw in primer seat plugs
• Ergonomic grip
• RCBS lifetime warranty
Part #
90201
Description
Universal Hand Priming Tool
Description
Hand Priming Tool
Note: (Universal HPT square tray & lid compatible with 90200 HPT)
Special Order, Oversize shell holders will not work on the RCBS hand priming tool!
This case-priming tool has several features
that make it revolutionary. It has a universal
case holder capable of accepting case sizes
from 32 ACP to 45-70 Gov. It uses the RCBS
APS Priming System color-coded strips for
fast, safe, and contamination free priming.
The strips connect for continuous operation
with a smooth, sensitive feel. This priming
tool is very useful and portable.
Part #
88507
10
Who hasn’t dumped a load
of primers onto a tray only
to have half the box scatter
all over the floor? Then trying
to figure out if those primers
left in the tube were standard
or magnum can also be a
headache. Those days are
finally over. RCBS’ APS
priming system will revolutionize the way you prime. It’s fast and simple.
With APS, the best part is you’ll never touch another primer again. Just
peel off a preloaded flexible primer strip, feed it into the bench-mounted
APS tool and you’re ready for uninterrupted priming. The strips are color
coded so you can tell the difference at a glance between magnum,
standard, pistol, or rifle primers. There are no loose primers to count or
keep track of, you can stop or start whenever you want. Operation of the
priming tool is also simple-each handle stroke indexes a new primer as
the one before is seated into the case. No priming tool has a better feel
for primer seating than APS.
Features & Benefits
• Strips automatically feed and can be interlocked for
uninterrupted priming.
• 1 case to 1,000 or more.
• RCBS standard shell holders slide right in place.
• The adjustable stop allows you to set your own seating depth.
Part #
88501
Description
APS Bench-Mounted Priming Tool
Do you have primers in conventional
packaging? The APS Primer Strip Loader
allows you to quickly fill empty strips.
Each push of the handle seats 25 primers,
and its small size will make for easy
storing. Use the chart supplied below for
reference. (Primers not included.)
This tool is the safest, easiest, and fastest
hand-operated primer tool. A patented
safety mechanism separates the seating
operation from the primer supply virtually
eliminating the possibility of a primer
detonation in the supply tray. This unit fits
in your hand for portable primer seating.
Primer tray installation requires no contact
with the primers. This unit uses RCBS
standard removable shell holder heads. It
comes equipped with both large and small
primer plugs and sleeves.
RCBS APS Hand Priming Tool
RCBS APS Priming System
RCBS APS Primer Strip Loader
RCBS Hand Priming Tool
Part #
90200
HUNTINGTON DIE SPECIALTIES - 2014
Product
APS #500 Small Pistol (white)
APS #300 Large Pistol (white)
APS #550 Small Pistol Magnum (red)
APS #350 Large Pistol Magnum (red)
APS #400 Small Rifle (yellow)
APS #200 Large Rifle (yellow)
APS #450 Small Rifle Magnum (blue)
APS #250 Large Rifle Magnum (blue)
APS #BR4 Small Rifle (black)
APS #BR2 Large Rifle (black)
APS #41 Small 5.56mm (orange)
APS #34 Large 7.62mm (orange)
Empty*
88513
88511
88517
88515
88512
88510
88516
88514
88519
88518
88520
88521
*APS empty primer strips hold 25 to a strip, 8 strips per pack.
Part #
88505
specify
Description
APS Primer Strip Loader
APS Primer Strips (empty)
Description
APS Hand Press Priming Tool
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
PRI M ING ACCESSORIES
RCBS Automatic Priming Tool
This tool is the top of the line for RCBS
priming devices. The Auto Priming Tool
provides unusually fast and accurate one
hand primer seating in a single step. The
unique leverage system is single stage for
sensitivity. You can feel the primer as it seats
to the bottom of the pocket. The primers are
released one at a time through the auto primer feed
tube. This eliminates possible contamination caused
by handling primers with oily fingers. Both size primer rod assemblies and
auto primer feed tubes are supplied with the tool. This unit will handle any
boxer-type primer.
Part #
Description
9460
Automatic Priming Tool
RCBS Overhead Ram Priming System
The Ram Priming Unit gives you better “feel” by seating
the the primer at the top of the press stroke. You can also
set a positive stop to speed up your reloading process.
Works with any single-stage or turret press with 7/8”-14
threads and RCBS type single-stage shell holder. Includes
large and small primer rod assemblies for boxer-type rifle
and pistol primers.
Part #
Description
9165
Ram Priming Unit
RCBS Universal Primer Arm-2
This primer arm fits most RCBS presses and many other
“C” type presses. Designed to seat primers quickly and
accurately. It comes with large and small primer plugs with
sleeves to fit boxer primers. The flat return spring helps
prevent primers from jamming and the primer arm action.
Not for use with Rock Chucker Supreme press.
Part #
Description
9550
Universal Primer Arm-2 w/ lrg, sml plugs & sleeves
9552
Primer Plug & Sleeve, large
9553
Primer Plug & Sleeve, small
RCBS Automatic Primer Feed Combo
This unit is designed to fit on most reloading presses. It is
designed to drop primers one at a time into the primer plug
and sleeve each time the primer arm returns from seating the
previous primer. This unit eliminates primer contamination.
The tubes are interchangeable and designed to pick up the
primers upside down. The tube then inverts and is inserted
into the body and the key is removed so the primers can
drop down to the insert position. Fits Rock Chucker-II,-III,IV, JR, Reloader Special and most “C” Presses.
Not for use with Rock Chucker Supreme press.
Part #
9580
9581
9582
Description
Automatic Primer Feed Combo
Primer Feed Tube Assy., large
Primer Feed Tube Assy., small
RCBS Pro 2000 Tube Priming
Conversion Kit
casE prep
RCBS RC Supreme Auto Prime
Available for the RC Supreme Press is the Auto
Prime Unit. This accessory allows you to convert
your one-at-a-time priming into a tube fed system.
It’s faster and you do not handle the primers. This
unit has a safety shield and a 100-primer capacity.
Includes pick up primer transfer tubes for small and
large primers. RCBS lifetime warranty.
Part #
9358
Description
RC Supreme Auto Prime
50 BMG Priming System
The RCBS 50 bmg Priming system
provides a dedicated bench mounted
tool that allows handloaders to easily
reprime their cases. The primer tube
holds (20) 50 bmg primers and features
a Safety Shield Tube. Primer pick-up
tube, flat and oval primer seat plugs included.
Note: Military brass must have the crimp removed (#9561) and primer pocket reformed
(#9562) or new primer will not seat into pocket.
Part #
9560
Description
Priming Bench Tool
(*50 BMG Dies and Accessories page 38.)
RCBS AmmoMaster 50 BMG Ram Priming Unit
The .50 bmg Ram Priming Unit in conjunction with the
AmmoMaster Single Stage press allows you to reprime the .50 bmg cartridge. It comes supplied with a
flat and cupped primer plug to accommodate the two
styles of primers available for the .50 bmg.
Part #
88772 Description
.50 BMG Ram Priming Unit
RCBS Primer Tray-2
The primer tray is an ingenious way to quickly position
primers anvil side up for easy loading. To use, simply
scatter your primers onto the grooved surface of
the tray and then with a circular horizontal motion
shake the tray. Within a few agitations all primers will
turn anvil up. The design of the tray corresponds to the latest primer
packaging now on the market. The dimensions are 4 inches square.
Part #
9480
Description
Primer Tray
RCBS Universal Decapping Die
This die is designed to decap only. The unit will decap
small and large flash holes If you want to clear your primer
pockets before you clean or size your cases, this is the
best way to do it. (replacement parts on page 43).
Part #
87580
87585
Description
Universal Decap Die .22-.25 cal
Heavy Duty Decap Die .27-.45 cal
RCBS Power Punch Decapping Assembly
This kit includes everything needed to convert the priming system on
the Pro 2000 Progressive Press. Simpler and faster tube priming system.
Part #
Description
88876 Pro 2000 Tube Priming Conversion Kit
This assembly is designed to decap only for use with
your progressive reloader. The unit will decap small and
large flash holes. If you want to clear your primer pockets
before you size your cases, this is the best way to do it.
Part #
9627
Description
Power Punch Decap Assembly
Toll Free Order Line 1-866-735-6237
11
< TOC >
casE prep
PRI M ING ACCESSORIES
RCBS Berdan Decapping Tool
This tool provides a practical dry method
to easily remove Berdan primers. The unit
decaps a wide range of cartridge case
sizes. All functional parts are made from
top grade alloy steel, then heat-treated for
lasting performance and efficiency. The decap pins are made of hardened
high-grade tool steel. The decapper comes complete with a case holder
and allen wrench.
Part #
9525
9528
Description
Berdan Decapping Tool
Berdan Decapping Pin
We have taken the RCBS Ram Priming Unit and
adapted it to take the RCBS Berdan Primer Assembly.
This makes the perfect unit to seat Berdan Primers.
The unit fits in the top of your Reloading Tool and
the Primer Assembly fits in a holder in the shell
holder slot of your press ram. There are three sizes
of Primer Assemblies to fit the three Berdan Primer
sizes. Remember that your shell holder head must be drilled out with a
carbide drill to accommodate the larger size of Berdan Primers.
Description
Berdan Primer Unit w/o Seater Assembly
Berdan Primer Seater Assembly .217”
Berdan Primer Seater Assembly .240”
Berdan Primer Seater Assembly .255”
Shell Holder Head Drilled for Berdan Primer
Note - Order Primer Seater Unit and Primer Seater Assembly in the diameter you want.
RCBS Primer Pocket Brush Combo
In the manufacturing process of brass, often a burr is left on the inside
edge of the flash hole. A burr can distort the pattern of hot gases
generated by the primer and adversely affect ignition of the powder. This
unit has a replaceable, self-locating case pilot stop collar that eliminates
the time lost in trying to find the flash hole. The collar also functions as
a depth stop to prevent removing too much brass from the hole. The
threaded rod and cutter assembly can be used with an accessory handle
or it can be used with a
drill. Case pilot stops are
available in most popular
calibers. Shaft dia. .204”
88145
.22 Caliber
88147
7mm Caliber
88146
6mm Caliber
88148
.30 Caliber
Part #
specify
88144
Description
Flash Hole Deburring Tool (complete)
Replacement Rod and Cutter Assembly
Flash Hole Deburring Tool / Case Pilot Stops
Separate case pilot stops are available in most popular
calibers. Does not include the cutter shaft assembly or
handle (sold separately).
88122
22 Caliber
88128
30 Caliber
88135
375 Caliber
88123
6mm
88129
32 Caliber
88136
40 Cal / 11mm
88124
25 Caliber
88130
8mm
88137
41 Caliber
88125
6.5mm
88131
34 Caliber
88138
44 Caliber
88126
270 Caliber
88133
35 Caliber
88139
45 Caliber
88127
7mm
88134
36 Caliber
Part #
specify
Description
Flash Hole Deburring Tool Case Pilot Stops
Primer Pocket Swager Combo-2
There are several methods of cleaning
primer pockets and this is the best.
The brushes are made of stainless steel
bristles. The two brushes easily screw into
the Accessory Handle-2.
Larger, more ergonomically designed
Accessory Handle-2 for use with a wide array of RCBS accessories.
Part #
9575
9577
9578
9332
RCBS Flash Hole Deburring Tool
Flash Hole Deburring Tools Complete
HDS Berdan Primer Seater
Part #
9448A
9447A
9446A
9445A
specify
HUNTINGTON DIE SPECIALTIES - 2014
Description
Primer Pocket Brush Combo
Primer Pocket Brush, large
Primer Pocket Brush, small
Accessory Handle-2
This tool provides a quick and precise
way to remove the primer crimp from
military cases. The unit leaves the primer
pocket perfectly rounded with the correct
dimensions to seat boxer primers. Primer
pocket reaming can leave oversize and oval
shaped holes, where as primer pocket swaging
does not. The unit comes equipped to handle
large and small pockets. The die body fits standard size presses and the
swager units will fit any modern removable head ram.
The Primer Pocket Swager Combo-2 has been redesigned to fit a larger
group of cases. The swaging rods are made from stronger high tensile
steel, more than doubling the strength versus the original design.
50 BMG Primer Pocket Tools
Designed to be used with the Accessory Handle-2 or on
the Trim Mate Case Prep Center, the 50 BMG Carbide
Primer Pocket Uniformer utilizes a carbide cutter to
square the bottom of the primer pocket and uniform the
primer pocket depth.
NOTE: Not for use on progressive presses.
The 50 BMG Military Crimp Remover cuts away the primer
pocket crimp found on military 50 BMG brass, allowing
the handloader to easily reprime their cases.
Redesigned to speed up case processing and reduce the
amount of primer pocket being cut away. Cuts away the
primer pocket crimp found on military brass, allowing the
handloader to easily reprime their cases. Available in small
and large primer pocket sizes. For use with the Accessory
Handle-2 or Trim Mate Prep Center (not included).
Part #
9561
9562
Description
50 BMG Carbide Primer Pocket Uniformer
50 BMG Military Crimp Remover * 50 BMG products on page 38, 78.
12
Part #
9481 Description
Primer Pocket Swager Combo-2 Trim Mate Military Crimp Removers-2
Part #
90386 90387 Description
TM Military Crimp Remover-2 Small TM Military Crimp Remover-2 Large Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
PRI M ING ACCESSORIES
Primer Pocket Swager - Bench Tool
This dedicated bench mounted
Primer Pocket Swager Tool makes
removal of primer pocket staking/
crimp a simple task.
Staked/crimped primer pockets can
be found in more than just military
ammunition. Due to the popularity of
AR platform rifles, much of the commercial ammunition also has staked
primer pockets. The rugged die cast aluminum base, hardened steel
cam and foam padded grip handle require 35-percent less force than
other tools to complete the job. A hardened steel rod supports the case
from the inside allowing the case to float for perfect alignment with the
hardened steel swager head. Rotate the case down into position and
with a simple pull and push of the handle, the job is complete. Includes
hardened steel small and large swaging heads and rods to accommodate
cases 22-caliber and larger.
Part #
9474
Description
Primer Pocket Swager - Bench Tool George & Roys Primer Sealant
We can’t tell you how many times that people have called
us looking for a primer sealant. We finally have a good one.
Here is something essential when you are handloading
ammunition for all kinds of weather conditions. Its easy to
use and it works.
Part #
GR100
Description
Primer Sealant
c a s e l u b e ACCESSORIES
RCBS Dry Case Neck Lube
The Dry Graphite Lube is designed for interior
and exterior case neck lubing. This is a must for
people who neck-size.
Part #
90377
This item is a necessity for any
reloader. This package includes
the Case Lube Pad, Case Lube,
Accessory Handle-2, and Small
and Medium Case Neck Brushes.
Everything needed for lubing your cases prior to resizing
them.
Description
Case Lube Kit-2
This lube is the second generation of Lube offered by
RCBS. It offers better lubricity and viscosity than the older
formula. It is water soluble, and is non-toxic. Specifically
designed to be used with the RCBS Case Lube Pad &
Lube Dies, (2 ounce bottle).
Part #
9311
Description
Case Lube-2 (2 ounce bottle)
Imperial Dry Neck Lube
Made with a graphite base, Imperial Dry
Neck Lube Prevents chatter, build-up, and
powder contamination. It is quick and easy to use.
Part #
SN1
Description
Imperial Dry Neck Lube, (1 ounce container)
Imperial Sizing Die Wax
This die wax has high lubricity for case forming and
full length resizing and is easy remove. Will not stick
or gall cases in the die. To clean, just wipe your
cases with a paper towel. Use very sparingly.
Part #
SN2
Description
Imperial Sizing Die Wax, (2 ounce container)
RCBS Case Slick Spray Lube
Case Slick is an exclusive formulation that provides
exceptional lubricity for resizing or forming of metallic
rifle and pistol cases. Testing reveals, Case Slick reduces
the force needed to resize .308 Winchester cases by 35
to 70 percent when compared to other lubes. Reducing
the resizing force makes the process easier on you and
your brass. Case Slick is formulated to flow evenly over
the surface of the brass. Uniform coverage eliminates the
possibility of denting the shoulder of the case. 4 ounce
spray pump bottle.
Note: RCBS Case Slick Spray Lube is subject to several warnings.
Description
Case Slick Spray Lube (4 ounce bottle)
RCBS Case Neck Brushes
RCBS Case Lube Kit-2
Part #
9336
RCBS Case Lube-2
Part #
9315
Description
Dry Case Neck Lube
casE prep
These brushes are designed to
remove dirt and powder from
the inside of case necks and
to lightly lube the inside of the
neck for better neck expanding.
Part #
9327
9328
9329
9332
Description
Case Neck Brush, small
Case Neck Brush, medium
Case Neck Brush, large
Accessory Handle-2
RCBS Case Lube Pad
This Case Lube Pad is a necessity for any
reloader. It is encased in a plastic box and
has a lid to help keep the pad clean.
Part #
9307
Description
Case Lube Pad
Toll Free Order Line 1-866-735-6237
13
< TOC >
casE prep
c a s e l u b e ACCESSORIES
RCBS Lube Dies
These dies were developed for those who use progressive
reloading equipment. The lube die eliminates the messy
chore of hand-lubing cases. Position it in station #1 of a
progressive reloading tool, it automatically lubes the case
and decaps it at the same time.
#1 lube die fits 222 and 223 based cases.
#2 lube die fits the 30-06 based cases from 22-250 to 8mm-06.
#3 lube die fits the 30-30 base cases from 225 Win. to 38-55.
#4 lube die is designed to handle all the belted & magnum cases.
Part #
87551
87552
87553
87554
Description
Lube Die #1
Lube Die #2
Lube Die #3
Lube Die #4
Save time with the new RCBS Ultrasonic Case Cleaner. Its 3.2-quart
stainless steel tank removes tarnish, carbon buildup and metal oxides
from brass cases. Use the keypad and display to select from five temperature settings and set the timer from 1 to 30 minutes. Features a powerful 60w transducer, 100w ceramic
heater, 36kHz ultrasonic frequency
and a sensor that indicates when to
change out solution. The cleaner has
a degas function, plastic tray, & convenient drain valve & tube.
Use with RCBS Ultrasonic Case
Cleaning Solution (sold separately).
Description
Ultrasonic Case Cleaner 120vac US
Ultrasonic Case Cleaning Solution quickly removes tarnish, carbon buildup and metal oxides from brass cartridge cases. The formulation cleans brass cases, including the primer pockets
(when spent primers are removed), producing a bright finish. Ultrasonic Case Cleaning Solution is non-corrosive and
non-combustible. One quart of the concentrated solution
makes 10 gallons of cleaning mix, with a built-in measuring
cup for use with all brands of ultrasonic cleaners.
Ultrasonic NT Weapons Cleaning Solution
Designed for use with the RCBS Ultrasonic Case Cleaner, new Ultrasonic Weapons Cleaning Solution quickly removes grease, carbon buildup
and fouling from firearm parts. The fast-acting synthetic detergent cleans
all part surfaces, and its rust preventive helps stop corrosion. Ultrasonic
Weapons Cleaning Solution is easy to use, and its formulation is non-corrosive and non-combustible.
14
Part #
87088
Description
Vibratory Case Cleaner 120vac US
RCBS Media Sifter
This is a case-cleaning accessory you should always have near your
bench. It is designed to fit several different sized
buckets and is slotted to allow either dry or liquid
media to flow through the unit and leave the cases
behind. This is an inexpensive and handy item.
Description
Media Sifter
RCBS Rotary Case / Media Separator
Separates the clean cases from the cleaning media. Simply empty the
cases and media from the case cleaner
into the separator basket. With several
turns of the handle, media falls to bottom
of separator, leaving cases clean and
ready to use. Capacity: (180) 30-06 cases
or (400) 38 Special cases with media.
Part #
87076
Description
Ultrasonic Case Cleaning Solution
Description
Ultrasonic NT Weapons Cleaner New
Description
Sidewinder Tumbler 120vac US
Sidewinder Tumbler 240vac Eur
Sidewinder Drum Assembly
This Case Cleaner offers a 3-1/2 quart bowl. This bowl is a 1/4” thick and
rests on a steel base. The motor is a thermally protected ball-bearing
type. The bowl holds about (400) 38 Special cases
and about (180) 30-06 cases. The Vibratory Case
Cleaner cuts down your cleaning time over the
Sidewinder. Two year limited warranty.
Part #
87075
Ultrasonic Case Cleaning Solution
Part #
87059
This unit cleans case exteriors, allowing
for easier resizing, better functioning in the
firearm. With this unit you can eliminate any
chemical contaminates that might effect
powder or primer. This tumbler is specifically
designed for brass only. The tilted 21° easy
access drum is very quiet and the built in
timer adjusts for automatic shut-offs from
five minutes to 12 hours. The perforated cap doubles as a screen to
separate either dry or liquid cleaners. The capacity of this unit is up to
(300) 38 Special cases or (150) 30-06 Springfield cases. The unit includes
an 8 oz. bottle of liquid cleaner and is available in both 120 volt (U.S.) and
240 volt (Europe). Two year limited warranty.
RCBS Vibratory Case Cleaner
Ultrasonic Case Cleaner
Part #
87058 RCBS Sidewinder Case Tumblers
Part #
87000
87005
87050
c a s e c l e ani ng equi p ment
Part #
87055 HUNTINGTON DIE SPECIALTIES - 2014
Description
Rotary Case/Media Separator
RCBS Case Cleaner Media
RCBS offers several types of media for cleaning cases. They offer two
forms of dry media. The walnut media is excellent for general cleaning,
where as the corn cob media works best for final polishing, or if you
plan to “moly-coat.” The Sidewinder liquid cleaner is a concentrate. One
eight-ounce bottle makes four gallons of cleaner. This liquid works well
for cleaning badly stained cases.
Part #
87067
87068
87069
87015
Description
Formula 1 Walnut Shell Media (5 lbs.)
Formula 2 Corn Cob Media (5 lbs.)
Polishing Compound - 5 pack
Sidewinder Liquid Case Cleaner (8 oz)
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
m i sc e l l a n e ous ac cessor i e s
RCBS Accessory Base Plate-2
The Accessory Base Plate-2 is a durable die
cast aluminum plate with a series of tapped
holes for mounting the following RCBS tools
and accessories: Rock Chucker, Pro 2000,
Turret Press, AmmoMaster, Reloader Special
Press-2 & -3, Partner Press, Rotary Case
Trimmer and Trimmer-2, Powder Measure
Stand, Lube-a-Matic and Lube-a-Matic-2, Standard Priming Tool and
APS Automatic Priming Tool. This is ideal for the person who has limited
space on their loading bench or is using the bench for other things and
cannot leave your tools set up all the time. Measures 10”x6”x1”.
Part #
9280
Description
Accessory Base Plate-2
Description
Stuck Case Remover
The RCBS Die Wrench simply slips onto the 1-3/16” die lock ring lock
like a socket. Its pivoting handle allows leverage from any angle and the
heat-treated steel construction stands up to all the force you can muster.
Description
Die Lock Ring Wrench (1-3/16”)
RCBS VLD Deburring Tool
The increasing popularity of Very-Low-Drag (VLD) style bullets has lead
RCBS to offer a 22 degree VLD Deburring tool. The 22 degree angle
allows the bullet to be seated into the case without damaging the boattail and ruining accuracy. The VLD Deburring tool can be used as is,
attached to a RCBS Accessory Handle or Handle-2 or mounted on the
Trim Mate Case Prep Center.
Features & Benefits
Part#
S050
S100
S200s
S200
S300
S400s
S400
S500s
S500
S600
S700
S800
S900
S1200
S1300
Description BLOCK #0 - 25 ACP
BLOCK #1 - 22 Hornet, 17 Hornet
BLOCK #2s - 32 auto, 32 short/long, 380acp
BLOCK #2 - 17, 222, 223, 30 Carbine, 32 H&R
BLOCK #3 - 9mm, 38 Super, 25-20, 32-20, 218 Bee
BLOCK #4s - 10mm, 40 S&W, 41AE, 38 S&W
BLOCK #4 - 38spl, 357mag, PPC, 7.62x39, 224 Wby.
BLOCK #5s- 45 acp, BR Rem.
BLOCK #5 - 308, 30-06, 243, 35 Rem, 240 Wby, 7-08, 7x57, 8x57, 6.5x55 BLOCK #6 - 44 Mag/Spl, 45 LC, 30-30wcf, 41 Mag, 284
BLOCK #7 - 7mm Mag, 30-40, 44-40, 404, 50 AE, All Mags
BLOCK #8 - 45-70, 378, 416, 460 Wby, 348, 500 S&W
BLOCK #9 - 50-70, 50 Sharps, 470 N*
BLOCK #12 - 577 NE*
BLOCK #13 - Fits 50 BMG, 20 gauge** & Lil Dandy Rotors
(*) 32 hole configuration, (**) 25 hole configuration
Part #
98975
These tools are designed to put the pointed end
into the case mouth. As you turn it, the burrs are
removed. It puts a precise bevel on the inside
lip. The other end fits over the case mouth to remove the exterior burrs
left after trimming. The center pin keeps the case aligned during the deburring operation. The machined cutting blades are case hardened to
provide years of use. The RCBS unit fits all cases from the .17 calibers
to .60 caliber.
Part #
9348
Description
Universal Case Loading Block
A lot of the RCBS products use hex screws, so RCBS provides a complete
set of Hex Keys that will cover the various screws. This is a nice item to
have on the bench. Key sizes: .05” 1/16” 5/64”
3/32” 7/64” 1/8” 9/64” 5/32”.
Description
VLD Deburring Tool with Handle
VLD Deburring Tool
RCBS Case Deburring Tools
• Holds 50 cases
• Two sided design
• Durable Plastic construction
• Three different case fit per side
• RCBS Lifetime Warranty
• Fits WSM, WSSM, and Ultra Mag family of cases
• Improved fit & convenience over existing loading blocks
RCBS Fold-up Hex Key Set
• 22 Degree Angle
• Does not damage the boat-tail of VLD bullets
• Hand or Powered use
Part #
9352
9351
Features & Benefits
Stalwart wooden loading blocks are a great asset to any reloader. These
blocks are made of hardwood; they have a fifty-hole configuration, and
stack nicely when not in use. These blocks are priced right and come in
popular sizes.
RCBS Die Wrench
Part #
9634
The RCBS Universal Case Loading Block has been designed to fit most
any standard rifle or pistol case including the WSM, WSSM and Ultra
Mag family of cartridges. The two-sided design offers three different case
fits per side and will hold (50) cases. Short pistol cases fit in the upper
portion of the block for easy access. The stepped holes accommodate
large pistol and rifle cases.
Stalwart Wooden Loading Blocks
The Standard Stuck Case Remover is designed to
provide a quick and easy way to remove the stuck
case. You remove the Expander Decap Rod and
drill and tap the base of the stuck case. Then with
the special extractor, you just back the case out
of the die.
Part #
9340
RCBS Universal Case Loading Block
Part #
9452
RCBS Stuck Case Remover
casE prep
Description
Fold-up Hex Key Set
Forster Deburring Tools & Accessories
The Forester Deburring Tool offers the reloader a quality tool with two
convenient ways to use it. You can use the unit free hand, or with the DBT
Base. The debur tool is made from tool steel for long-life.
Part#
Description
DB1000 Deburring Tool
DB2000 DBT Base (less deburing tool)
Description
Deburring Tool .17 to .60 caliber
Toll Free Order Line 1-866-735-6237
15
< TOC >
casE prep
pl ast i c bo x es
J&J Ammo Boxes
We found some ammo boxes that are not only well made but
inexpensive. They are available in smoke color and go from 9mm
to 600 N.E. When you are looking for quality, durability, and price,
the search stops here.
Hinged Top 50 Pack Box
Part #
3H50S 4H50S
9H50S
10H50S
AE50S
5H50S
SR50S
MR50S
LR50S
30H50S
Description
J&J 38 Spl, 357 Mag
J&J 41, 44 Mag, 45 Colt
J&J 380 Auto, 9mm
J&J 40 S&W, 10mm, 45 ACP
J&J 50AE
J&J 223 WSSM, 500 S&W Mag
J&J 17 Rem, 223 Rem,
J&J 22-250 to 308 Win
J&J 30-06 to 458 Win
J&J 300 WSM
Hinged Top 100 Pack Box
Part #
Description
3H100S J&J 38 Spl, 357 Mag
4H100S J&J 41, 44 Mag
9H100S J&J 380 Auto, 9mm
10H100SJ&J 40 S&W, 10mm, 45 ACP
22-100S J&J 22 Hornet to 357 Max
SR-100S J&J 17 Rem to 223 Rem
BR-100S J&J 6mm BR to 7.62x39
Hinged Top 175 Pack Box
Part #
Description
LR-175S Foam Core .625” Dia.x 3.17” Length
HUNTINGTON DIE SPECIALTIES - 2014
RCBS Ammo Boxes
Leave it to RCBS to improve the basic ammunition box. These
boxes have flush exteriors with recessed latches for stacking,
exposed front row for easy removal of the first round, an antirattle bullet tip nest. The boxes give empty cases support, and
provide an inside label and long-lasting hinge. These are a must
for the reloader. See RCBS Reference Section pages 72 & 73 for
application.
Part #
86901
86902
86903
86905
86906
Description
Ammo Box- Small Rifle
Ammo Box- Medium Rifle
Ammo Box- Large Rifle
Ammo Box- Medium Pistol
Ammo Box- Large Pistol
RCBS Utility Box
This box will hold a mould or shell holder
heads, or anything else in small parts that
you might want to store. Made of the same
durable plastic as the die storage boxes.
Part #
9888
Description
Utility Box
RCBS Die Storage Box
These die boxes are made from an extra heavy plastic with builtin cradles to securely hold the dies in place. A special lock holds
the lid closed, even when dropped. The boxes will hold up to four
dies and are stackable. They are available
in green or gray.
Part #
9889
9890
Description
Die Storage Box - Green
Die Storage Box - Gray
NOTES: ____________________________________________
___________________________________________________
___________________________________________________
Slip Top 20 Pack Rifle Box
___________________________________________________
Part #
RS20S
MS20S
AA20S
XL20S
30H20S
___________________________________________________
Description
J&J Medium Rifle 223 to 30-06
J&J Large Rifle to 375 H&H Size
J&J 223 WSSM, 50 Cal S&W Mag AA
J&J XL Rifle 45-70 to 600 NE*
J&J Rifle .300 WSM Win. Short Mag
* Alternating layout 10 rounds only.
Slip Top 50 Pack
Part #
3S50S
4S50S 5S50S
Description
J&J 38 Spl, 357 Mag
J&J 40 S&W, 10mm, 45 ACP
J&J 41, 44 Mag, 45 Colt
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
16
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
m e a s u rement t ool s
RCBS Precision Mics
Here is one of the most innovative
products in recent years from RCBS.
This is designed for the handloader who
is seeking the best possible performance
from their rifle. This unit provides a
micrometer reading of your chamber
dimension and bullet seating depth.
Using a fired case from the rifle gives the
precise measurement of the chamber’s
head and shoulder dimension compared to the SAMMI recommendation.
Knowing this dimension, you can then accurately set your sizing die to
best-fit a cartridge to your chamber. This gives you the best performance
possible and results in longer brass life and safer loads. The micrometer
function on the gauge is also applied to setting the bullet seating depth.
The gauge reads off the lands of the barrel, so the setting does not
change with different bullet shapes.
88299
204 Ruger
88319
7mm Rem Mag
88301
220 Swift
88340
7mm Rem Ultra
88302
88303
88304
88300
88305
88309
88306
88307
88310
88308
88314
88315
22-250
222 Rem.
223 Rem.
223 WSSM
243 Win.
243 WSSM
6mm Rem.
25-06
25 WSSM
257 Robts'.
6.5x55
270 WSM
88321
88322
88323
88324
88325
88326
88327
88328
88329
88330
88331
88333
7mm Rem SA Ultra Mag
7mm-08
7x57mm Mauser
30-06
300 WSM
300 Rem SA Ultra Mag
300 Win Mag
300 Rem Ultra Mag.
308 Win
325 WSM
338 Win Mag
338 Rem Ultra Mag
88316
270 Win.
88337
375 H&H Mag
88317
280 Rem.
88339
375 Rem Ultra Mag
88318
7mm WSM
Part #
specify
Description
RCBS Precision Mics
RCBS Trigger Pull Gauges and Scales
These devices are indispensable for a
serious shooter or hunter. The Trigger
Pull Gauge allows you to measure and
adjust the trigger pull pressure on most
any gun. It reads in grams on the left side
and ounces on the right. 72 oz maximum.
measures from 8 oz to 8 lbs. in graduated 2 oz. increments. Made
from top quality non-corrosive materials which will assure a lifetime of
accurate and dependable
service. Accurate to + or 4 ounces.
Description
Trigger Pull Gauge
Premium Trigger Pull Scale
RCBS CaseMaster Gauging Tool
A quick, convenient way to determine several
important case and cartridge dimensions. The
CaseMaster gauging tool measures case neck
concentricity, uniformity, and thickness, as well as
case length and bullet run out. All are important to
accuracy and safety. Detects case head separation
before symptoms are apparent on the outside of
the case. Much quicker than a dial caliper and
makes a tedious job simple and less tiring.
Part #
87310
Description
RCBS CaseMaster Gauging Tool
RCBS Stainless Steel Dial Calipers
This unit is designed for use with a
Rotary Trimmer as well. It has a 6”
capacity and measures four ways,
outside, inside, depth and step.
The unit is made of stainless steel.
It is a valuable addition to any bench.
Part#
87305
Description
Stainless Steel Dial Calipers
RCBS Electronic Digital Caliper
Instant reading. Very easy to use.
Hardened stainless steel body
for prolonged tool life. Switches
from inches to millimeters with the
touch of a button. Large easy to
read numbers. Measures internal, external, depth and step dimensions.
Low battery indicator. Comes in fitted plastic case. 6” capacity.
Part#
87323
Description
Electronic Digital Caliper
RCBS Vernier Micrometer
Economical version with all metal
body and thimble. Easy to read black
numerals. Adjustment wrench and fitted
plastic case included.
Part#
87321
Description
Vernier Micrometer - 1” max
RCBS Mechanical Digital Micrometer
The Premium Trigger Pull Scale
Part#
9450
87307
casE prep
Quick, easy to read. Enhanced metal
body, white numerals, ratchet stop
on thimble applies even pressure
for measuring. Accurate to .0001”.
Adjustment wrench included with fitted
wooded storage case. 1” max.
Part#
87322
Description
Mechanical Digital Micrometer 1” max
RCBS Electronic Digital Micrometer
Instant reading. Top of the line.
Enameled metal body. Easy to read
numerals with instant inch/millimeter
conversion. Auto off after five minutes.
Fitted wood storage case included.
Part#
87320
Description
Electronic Digital Micrometer 1” max
measurement tools, contd
Toll Free Order Line 1-866-735-6237
17
< TOC >
casE prep / BULLET PULLERS / BOOKS
RCBS Ball Micrometer
RCBS Large Caliber Bullet Puller
Just what the reloader needs for
checking case neck thickness. Easy to
read and accurate.
Part#
87324
Designed for use with the .50 bmg Pack or
AmmoMaster-2 presses. Will also work with
a press that has an 1 1/2”-12 thread. Accepts
large caliber collets.
Description
Ball Micrometer - 1” max
b u l l et p ul l er s
RCBS Standard Bullet Puller
This tool offers an alternative way to pull bullets
from cases. It works on any length or shape
bullet without damaging it, although soft lead
bullets can be distorted. The interchangeable
collets work like a draw collar on a lathe. They
tightly lock on the bullet as the case pulls away.
Each collet is carefully machined internally for
precise bullet diameter. This unit will fit loading presses with 7/8”-14
thread. The puller body does not include collets*, order separately. Will fit
Herters-style bullet pullers.
Note: Not designed to be used with rimfire cartridges.
Part #
9440
Description
Bullet Puller w/o Collets 7/8”-14
*See chart for Bullet Puller collets in respective bullet diameter.
RCBS Standard Bullet Puller Collets
9419
9438
9420
9421
9422
9423
9424
9425
9426
9428
9427
Part #
specify
57176 B.P. Collet 17
B.P. Collet 20
B.P. Collet 22
B.P. Collet 6mm
B.P. Collet 25
B.P. Collet 6.5mm
B.P. Collet 270
B.P. Collet 7mm
B.P. Collet 30 / 7.35mm
B.P. Collet 32 / 8mm
B.P. Collet 338
9429
9430
9437
9431
9432
9433
9434
9435
9436
9439
9445
B.P. Collet 348
B.P. Collet 35 / 38
B.P. Collet 9.3mm
B.P. Collet 375
B.P. Collet 40
B.P. Collet 41
B.P. Collet 416
B.P. Collet 44 / 11mm
B.P. Collet 45
B.P. Collet 475
B.P. Collet 500
Description
Standard Bullet Puller Collets
S.O. Bullet Puller Collet- (specify)
Note: Special Order collets are available. Specify the caliber or bullet diameter.
*See chart for Bullet Puller collets in respective bullet diameter.
RCBS Special Order Bullet Puller Collets
Special Order collets are available. The special bullet pullers from .475”
diameter and larger are made on a 1”-14 diameter body. These items are
special order and are not available from inventory (90-to-120 days).
Part #
Description
57177 S.O. 1”-14 Bullet Puller Collet- (specify)
57179 S.O. 1”-14 Bullet Puller Body with Collet*- (specify)
* Requires a press adapter bushing (not included).
Part # Description
57191 1”-14 to 1-1/4”-12 Press Adapter Bushing 57191 1”-14 to 1-1/2”-12 Press Adapter Bushing Rock Chucker/AM-1: 1-1/4”-12 to 1”-14. Ammomaster Press-2: 1-1/2”-12 to 1”-14.
Part #
9446
Description
Large Cal. Bullet Puller Body
w/o Collets 1-1/2”-12
RCBS Large Caliber Bullet Puller Collets
These large caliber collets are to be used with the
1-1/2”-12 bullet puller body only.
Part #
9447
9448 57179
Description
Bullet Puller Collet 416 Barrett Bullet Puller Collet 50 bmg
S.O. 1-1/2”-12 Bullet Puller Collet- (specify)
RCBS Pow’r Pull Bullet Puller
The three-jaw chuck will fit the case head rim tightly
without damaging the head or rim. As you hit the puller
on a bench, both the bullet and powder will drop into
the main chamber of the unit where they can be easily
removed. You then loosen the chuck and remove the
empty case. You are ready to do another. The kinetic bullet puller is made of durable plastic with a light,
tough handle. It will work for any centerfire cartridge
from .22 to .45 caliber. Lifetime guarantee.
NOTE: The Pow’r Pull Bullet Puller is not designed to be
used with rimfire and crimped military cartridges.
Part #
9412
9451
9418
9416
Description
Pow’r Pull-II Kit with 3 Chucks
Replacement Chuck Assy., small
Replacement Chuck Assy., standard
Replacement Mag Chuck- WSM
b ooks
Sierra Rifle & Handgun Reloading
Manual - 5th Edition
This manual uses the three ring binder format that
allows you to insert updated material. It covers all the
new calibers on the market and updates on new powder
& bullets. There are sections covering a glossary of
ballistic, reloading and firearms terminology, plus updated information on
the reloading process, tools and equipment. There is a comprehensive
section on exterior ballistics and a great chapter of questions and answers
most commonly asked. This is 1152 plus pages of information you need!
Part #
500
Description
Sierra Rifle & Handgun Reloading Manual - 3rd Ed.
Norma Reloading Manual 2
The NORMA RELOADING MANUAL 2 (expanded edition) is full of history, good advice and loads using Norma bullets and powders. Norma celebrates 110 years
in the ammunition industry with the publication of its
second reloading handbook. This manual is a handbook
designed to instruct and educate both the beginner and
the more advanced handloader, whether the reader is an
avid hunter or a dedicated target shooter. 442 pages, hardbound.
Part #
1126
18
HUNTINGTON DIE SPECIALTIES - 2014
Description
Norma Reloading Manual 2 NEW
Toll Free Order Line 1-866-735-6237
continued on page 19 >>
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
books
Hornady Handbook
9th Edition
You’ll find over 900 pages
representing data of all the
newest Hornady bullets. Each
cartridge features applicable
Hornady bullets along with velocity/powder charts for quick
and easy reference.
Cartridge additions include the 17 Hornet, 327
Federal, 356 Winchester, 5.56 nato, 416 Barrett
and 505 Gibbs. There is also expanded data on
over 20 favorites. A variety of propellants such
as Power Pro Varmint, AR-Comp, CFE-223,
among others have been added.
In addition to the reloading charts, this reference manual provides shooting enthusiasts
with in-depth, easy-to-understand explanations
of internal, external and terminal ballistics. Coupled with the Hornady online calculator, shooters will have the tools they need to replicate the
environment where they plan to shoot.
Part #
99239
Description
Hornady Reloading Handbook 9th Ed.
Nosler Reloading
Manual #7
Cartridges of The
World 13th Edition
By Frank C. Barnes,
edited by Richard MAnn
Revised and Expanded. A
complete and illustrated reference for over 1500 of the
worlds most important sporting cartridges. The
book for every shooter, collector, & handloader.
• 55 new factory manufactured & wildcat
listings, with technical drawings
• Free CD includes a collection of odd &
obsolete cartridges
• Essays by leading writers on SAAMI,
wildcatting, trends, & rounds for AR15
This guide outlines the different and variety of
cartridges, and in doing so helps you chose
the best caliber for the type of shooting. You’ll
refer to this book’s large-size photographs,
load data and ballistics for commercially made,
obsolete, military and wildcat cartridges, from
the 1870s to the present. 40 color illustrations,
1,200 black & white illustrations. 568 pages,
paperback.
Part #
5066
Description
Cartridges of the World, 13th Edition
Loading Black Powder
Nosler’s latest and most
extensive reloading manual to
date. Packed with information
on all your favorite, classic, and
current cartridges. Detailed
step-by-step explanations of the reloading
process make this manual ideal for the novice
reloader. There are new powders and loads
listed, data is presented in a new graphic
format, and the ballistic tables are easier to
use. Nosler ballisticians offer advice &, wellknown hunters, shooters & gun writers offer
perspectives on each rifle & handgun cartridge.
By Paul Mathews
Part #
50007
By: John J. Donnelly, Judy Donnelly
Description
Nosler Reloading Manual, 7th Edition
Barnes Reloading Manual #4
This book features innovative
information for reloaders. There
are graphics that compare
bullets path and energies. New
section with articles written
by top outdoor and shooting
authorities on subjects such
as: hunting in Africa, mounting
your scope, handload accuracy, barrel cleaning,
outdoor photography and many other subjects.
New load data for all of Barnes bullets and easy
to use ballistic tables.
Part #
BRM4
Description
Barnes Reloading Manual #4
This book covers the basics
of black powder loading,
bullets, moulds, casting, care
of the cartridge case, powder
and powder charging, loading
rifle cartridges and developing and testing your
loads. This book is a must for your library.
Part #
567.4
Description
Loading Black Powder
The Handloader’s Manual of
Cartridge Conversions
Now available for the first time
since 2003, The Handloader’s
Manual of Cartridge Conversions offers the handloader
all the physical data, how-to
designs, tools, and drawings
needed to convert modern,
easily obtainable materials
into more than 1,000 different rifle and pistol
cartridge cases, ranging from the obsolete
patterns to modern, cutting-edge “wildcats.”
This classic guide has been revised with a new,
easy-to-reference format, complete with a full
index of hundreds of cartridges. This truly is the
handloader’s one-stop guide for creating personalized cartridges.
608 pages, paperback, Skyhorse Publishing.
Part #
JD4
books, dvd’s
JGS Chamber Reamer Prints
Intended for the serious gun
& rifle enthusiast. These
schematic sets make great
reference
material.
No
guessing on dimensions for
a caliber.
Part #
101
103
105
107
Description
Wildcat Chamber Prints (100+)
Ackley Chamber Prints (60+)
British Chamber Prints (40+)
American Chamber Prints (80+)
Hodgdon Annual Reloading
Manual 2014
Hodgdon 11th edition 2014
| offering this manual is in a
magazine format - not only
the updated loading data and
data for new calibers, but it
also gives you a variety of
articles covering a wide range
of subjects. This new manual has 17 new CFE
Pistol Powder cartridges included in it and
loading data on over 5,000 cartridges. Updated
for 21 Rifle and Pistol cartridges plus the 500
Nitro Express 3”’. This is an inexpensive, but
needed addition to your reloading bench. It is a
170 page soft cover. Publisher: Shooting Times.
Part #
AM-14
Description
Hodgdon Reloading Manual 2014 NEW
Shooting Black Powder
Cartridge Rifle
By Paul Matthews
This volume is the compliment
to “Loading Black Powder.”
Specific information for shooters is offered in this manual to
gain more understanding on
the operation & approach to
accurate black powder shooting.
Part #
567
Description
Shooting BP Cartridge Rifle
How To’s for the Black Powder
Cartridge Rifle Shooter
By Paul Matthews
The book is a sequel to the
other Matthews Books. This
book covers lube recipe, good
bore cleaners, over powder
wads, etc. Also advanced
technical data.
Part #
567.7
Description
How To’s for BPCR Shooter
Description
Handloader’s Manual
BOOKS & DVD’s, contd
Toll Free Order Line 1-866-735-6237
19
< TOC >
books, dvd’s, videos
books
More How-To’s for the
Black Powder Cartridge Rifle
By Paul Matthews
Contains lube recipes, good
bore cleaners, over-powder
wads, tips on compressing
powder charge, combating
wind resistance, improving
ignition & combustion, & case
annealing. 157 pages, photos/
illustrations.
Part #
567.95
Description
More How-To’s for the BPCR
Cast Bullets for the Black
Powder Cartridge Rifle
By Paul Matthews
Paul Matthews discusses the
specifics you need to know
for accurate bullets used
with black powder cartridges.
He details accurate casting,
mould descriptions, paper
patching,
and
shooting
accuracy.
Part #
567.9
Description
Cast Bullets for the BPCR
Shooting The British Double Rifle
- 3rd Edition
By Graeme Wright
The author reviewed his
classic work on Loading
for Double Rifle. This
work is better with more
information,
a
must
for anyone interested
in double rifles (loads,
ballistics and how they
work). In this revised 3rd
Edition, the load data section has been greatly
expanded, with load data on most nitro double
rifle cartridges. Shooter interested in loading
large cartridges in both smokeless and black
powder will benefit from this reference.
Part #
800
Description
Shooting British Double Rifle - 3rd Edition
Imported Military Firearms
By Steve Frey
This is a valuable resource for
Antique Firearms from 1866
to 1899. This 100 page, softbound book contains descriptions, loading data, history and
current gun values.
Part #
700
Description
Imported Military Firearms
Military Rifle & Machine Gun
Cartridges
By Jean Huon
This definitive work is one of
the best books Europe has
to offer on cartridges. This
English translation is concise
yet complete. It covers both
experimental and practical
calibers. This is a must for any serious reloader.
Part #
Description
120
Military Rifle & Machine Gun Cartridges
Ammo & Ballistics 5,
Revised Edition
By Bob Forker
The completely revised and
updated contains data and
illustrations on every sporting
cartridge sold in the USA.
Clear and concise writing that clarifies the
complexities of ballistic coefficients and energy
versus momentum, covers 169-plus calibers
from the .17 Mach 2 to the .700 Nitro Express.
Rifle and handgun calibers, manufacturers,
bullet weights, types, and construction.
Over 2,400 tables with ballistic data for all
commercially loaded hunting ammunition sold
in the US. Tables include velocity, energy, wind
drift, bullet drop, and ballistic coefficients up
to 1,000 yards. Manufacturers include A-Square,
Aguila, ATK, Black Hills, CCI/Speer, Cor-Bon Bullet, Dakota
Arms, Eley Ltd., Federal Cartridge, Fiocchi, Hirtenberger,
Hornady, Patria Lapua Oy, Lazzeroni, Kynoch (Kynamco
Ltd.), MagTech, Norma, Nosler, PMC (Eldorado Cartridge
Corp.), Remington, Dynamit (Nobel-RWS Inc.), Sellier and
Bellot, Ultramax, Weatherby, and Winchester.
Safari Press, 518 pages, Softcover.
Part #
Description
610
Ammo & Ballistics 5
Pet Loads from
Handloader -6th Edition
by Ken Waters
This is the most comprehensive
work in the handloading field.
It contains the loading data,
procedures, loading tables,
tips, precautions, and commentary on test
guns. Over 100 different cartridges are detailed
in this 1040 page softbound book, Wolfe Pub.,
1998.
Part #
Description
549
Pet Loads by Ken Waters
HUNTINGTON DIE SPECIALTIES - 2014
Designing and Forming Custom
Cartridges for Rifles and
Handguns
By Ken Howell
This
definitive,
comprehensive
and accurate guide
contains a wealth
of information on
rifle and pistol
cartridges. Out of
print since 2002,
This rare guide
is now available
in exact reprint.
Sections on: fire forming without a bullet,
interpret case specs, forming case process,
anneal formed cases, variations in case
capacity, chamber pressure variables, and
powder selection. Over 900 case listings with
scale illustrations, 596 pages, hardbound.
Part #
Description
4999
Designing Forming Custom Cartridges
Metallic Cartridge Handloading:
Pursuit of the Perfect Cartridge
by M.L. “Mic” McPherson
Mic
McPherson
has
written one of those
books you only see once
every so many decades;
it contains everything
that you need to know
about reloading a rifle
or handgun cartridge.
McPherson’s credentials
are very impressive, but
what makes him really impressive is this book.
It covers all aspects of the reloading process:
the cartridge case; maintaining, improving
and loading the case; the seating and reading
of primers; the loading of propellant; bullets
and the loading of bullets; accurate load
development; internal & external ballistics;
bullet making & casting; and the handloading
press. (with hundreds of photos and drawings)
This is not a reloading manual; rather, it is a
how-to book that covers the entire process of
cartridge reloading, in detail, from start to finish.
Safari Press, 426 pages, photos, drawings, 8.5”
x 11”, softcover, perfect bound.
Part #
Description
371
Metallic Cartridge Handloading NEW
NOTE: for detailed information
on all HDS reference materials,
visit our web site catalog at
www.huntingtons.com/store
continued on page 21 >>
20
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
books
Propellant Profiles 5th Edition
This book has been fully revised
and expanded to contain data
on 186 powders by 13 companies The following companies
have their products ‘profiled’
in this reference manual- ACCURATE POWDERS,
ALCAN, ALLIANT, ARCO, BLACK POWDER, GOEX, HODGDON, IMR, NORMA, THUNDERBIRD, VIHTAVUORI, WESTERN POWDERS and WINCHESTER. Wolfe Publishing,
2009 - 448 pages.
Part #
Description
544
Propellant Profiles
Ammo Encyclopedia 4th Edition
By Michael Bussard, edited by
John B. Allen, David Kosowski, &
Charles F. Priore, Jr.
The 4th Edition Ammo Encyclopedia has 972 pages
divided into 102 chapters
and contains over 500
listings for current and obsolete handgun, rifle, and
shotgun cartridges since
the mid-1800s including
detailed information, specifications, and measurements on rimfire, centerfire, and shotshell cartridges. The new feature is
the addition of a 12-page color section, along
with the industry’s newest cartridges. Many sections have also been updated with additional
information, charts and images. Blue Book Publications, 972 pages, softcover.
Part #
4990
Description
Ammo Encyclopedia 4th Ed.
Shooting Lever Guns
of the Old West
By Mike Venturino
This book has 300 pages of
information with 250 photographs of lever action rifles.
There is both a smokeless and
black powder sections from 25-20 to 50-110.
Part #
554.5
Description
Shooting Lever Guns of the Old West
Shooting Six Guns of
the Old West
Shooting Buffalo
Rifles of the Old West
By Mike Venturino
The author’s latest book is well
written and covers calibers
from the 40-70 bottleneck to
50-90 2-1/2”. This book gives
you the basics plus comprehensive loading
data and ballistics.
Part #
Description
SPG600 Shooting Buffalo Rifles of the Old West
SPG Black Powder Cartridge
Reloading Primer
Part #
554.6
Description
Shooting Six Guns of the Old West
40 Years with the 45-70
By Paul A. Matthews
If you are a serious reloader
and shooter of the 45-70,
this book is a necessity. It
condenses the author’s 40
years of experience with this
caliber, down to a usable
reference.
This
expanded
version includes 6 more years than the previous
versions and contains information on the Lever
Action Marlin 1895 SS, Navy Arms Buffalo Rifle,
plus long range 45-70 information. 184 Pages Softbound.
By Mike Venturino &
Steve Garbe
Part #
567.1
Here is the first authority
on black powder cartridge
reloading in this century.
This book covers the basics
and then moves on to cover
individual loading data from the 32-40 up to the
50-140 3-1/4”. If you are loading black powder
cartridge, This book has to be in your library.
The Paper Jacket
Part #
Description
SPG200 Black Powder Cartridge Reloading Primer
The Legacy of Lever
Guns Rifle Magazine
A complete reference for
loading and shooting lever
action rifles. Marlin, Winchester,
and more. Expanded into 2
volumes. Softcover.
Part #
566.5
566.55
Description
The Legacy of Lever Guns, Vol #1
The Legacy of Lever Guns, Vol #2
Black Powder, Pig Lead, Steel
Silhouettes
By Paul Matthews
Matthews has done it again!
This is a great book for the
intermediate and advanced
black powder shooter. It covers
topics such as, shooting better
groups, primers, wads, powder
compression, neck tension
and tapered bullets. Softcover.
Part #
567.14
Description
Black Powder, Pig Lead, Steel Silhouettes
By Mike Venturino
This book discusses in detail
loading and shooting black
powder pistols. Plenty of
pictures and history to boot!
books, dvd’s, videos
NOTE: for detailed information
on all HDS reference materials,
visit our web site catalog at
www.huntingtons.com/store
Toll Free Order Line 1-866-735-6237
Description
40 Years with the 45-70
By Paul A. Matthews
This book is the best source
of paper patching lead bullets
on the market today. It is
an excellent reference and
a necessary reference to
anyone loading paper patched
bullets. The art of wrapping a piece of paper
around a bullet to prevent lead fouling and
increase accuracy. 140 pages, many photos
and illustrations.
Part #
Description
567.2
The Paper Jacket
DVDs
RCBS Precisioneered
Handloading DVD
Whether you are an old pro
or just getting started in
handloading, this is the best
30-minute investment you’ll
ever make. Precisioneered
Handloading is entertaining,
educational and a must for the beginning as
well as seasoned reloader.
Part #
99910
Description
RCBS Precisioneered Handloading DVD
RCBS Bullet Casting
DVD
A
comprehensive
video
which is authoritative and
informative. This gives you
step-by-step instructions.
Part #
99907
Description
RCBS Bullet Casting DVD
21
< TOC >
case trimming equipment
c a s e t r immi ng equi p ment
Trim Pro-2 Manual Case Trimmer
The
popular
Trim Pro case
trimmer has been
improved with the addition
of a spring-loaded universal
shell holder. The springloaded
shell holder securely locks the case in alignment with the cutter. The
trimmer is designed for .001” accuracy. Coarse and fine trim length
adjustments. Fine adjustment bushing features .001” micrometer
markings. The spring-loaded shell holder will accommodate case head
diameters from .250” to .625” rims and up to 3-1/2” length..
Cartridge case from the 5.7x28 to the .338 Lapua Mag.
Note: Cases with rim diameters larger than .625” must be trimmed on the
RCBS High Capacity Trimmer #90352 (page 23).
Part #
90365 Description
Trim Pro-2 Manual Case Trimmer (no pilots)
Trim Pro-2 Case Trimmer Kit
This unit includes the Case Trimmer plus an assortment of pilots for the
popular calibers. Includes (9) pilots: #22, 24, 25, 27, 28, 30, 35, 44 & 45.
Note: Cases with rim diameters larger than .625” and longer than 3-1/2”
must be trimmed on the High Capacity Trimmer #90352.
Part #
Description
90366* Trim Pro-2 Manual Case Trimmer Kit (includes 9 pilots)
Trim Pro-2 Power Case Trimmer Kit
HUNTINGTON DIE SPECIALTIES - 2014
Trim Pro Replacement Parts
If you own the TrimPro, TrimPro-2, the Rotary or Rotaty Case Trimmer-2
RCBS provides these replacement items.
Part #
9406
90250 9364
86883
98930
Description
Trim Pro-2 Case Trimmer Cutter Head
TP-2 Case Trimmer Cutter Head- Carbide
Replacement 50 Cal. Trimmer Cutter*
Trim Pro Case Trimmer Dust Cover
Power Drill Converter
*Cutter for use on Rotary or Trim Pro-2 case trimmers when
trimming .500 S&W or .50-90 Government cases.
carbide
cutter head
.50 caliber
cutter
Trim Pro Case Trimmer Power Unit
You can upgrade your present
RCBS case trimmer to a power
trimmer in minutes. Your manual
trimmer easily mounts on the
power unit, cutting trimming
time in half. This unit features
the same advantages as the
Trim Pro Power Trimmer, only
you supply the trimmer; shell plates, and pilots.
Part #
90359
90364
Description
Trim Pro Power Unit- 120 vac US
Trim Pro Power Unit- 240 vac Eur
Universal Case Prep Center
Having the same improved spring-loaded universal shell holder of the
manual trimmer, the Power Case Trimmer features a high torque low rpm
motor. The self-feeding spring-fed cutter makes case trimming easy and
accurate. No pushing or feeding pressure is required, leaving your hands
free to do other case preparation tasks such as chamfering, deburring or
primer pocket cleaning. The positive locking handle and integral power
switch makes operation simple and safe. RCBS has also added a manual
on/off switch to aid in setting case trim length.
Kit includes (9) pilots: .22, .24, .25, .27, .28, .30, .35, .44 & .45
Note: Cases with rim diameters larger than .625” and longer than
3-1/2” must be trimmed on the 90352 RCBS High-Capacity Case
Trimmer (page 23).
The Universal Case Prep Center is powered by a DC motor that provides
9 inch-pounds of torque and adjustable output shaft’s rpm. There are six
stations for case preparation; four up to 360 rpm, and two up to 550
rpm. The spring-loaded feed system for hands-free trimming, and a
single lever loads and unloads cases and lengths from .720 inch to 3.375
inches, then disengages them from the cutter. The universal shell holder
accommodates case head diameters from .250 to .625 inch. Micrometer
adjustment for precise trimming. Carries a two-year limited warranty.
Includes (9) pilots: .22 .24 .25 .27 .28 .30 .35 .44 .45; large & small primer
pocket brushes; and inside chamfer, outside debur & alignment tools.
Part #
90367 Description
Trim Pro-2 Power Case Trimmer Kit (includes 9 pilots)- 120 vac
Part #
90370
Description
Universal Case Prep Center- 120 vac US
Trim Pro-2 Shell Holder Conversion
Upgrade your Trim Pro Trimmer to eliminate the need to purchase
additional shell plates. This conversion features spring-loaded jaws that
will accommodate cases from .250” to .625”. Not for use with RCBS
Rotary Case Trimmer or Rotary Case Trimmer-2.
NOTE: Cases with rim diameters larger than
.625” and longer than 3-1/2” must be trimmed
on the High-Capacity Case Trimmer #90352.
Part #
90368 22
Description
Trim Pro-2 Shell Holder Conversion
Our catalog is also available online!
www.huntingtons.com
( 1-866-RELOADS 8 [email protected]
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
High Capacity Case Trimmer Kit - Big Bore
c a s e t r immi ng equi p ment
RCBS Case Trimmer Pilots
These pilots fit only the RCBS system. They are
available in 25 standard sizes. See pages 72-73, 85.
Part #
Caliber
Part #
Caliber
9377
.17 caliber
9389
.35 caliber
9376
.20 caliber
9390
.36 caliber
9378
.22 caliber
9391
.37 caliber
9379
.24 caliber
9392
.40 caliber
9380
.25 caliber
9393
.41 caliber
9381
.26 caliber
9397
.416 caliber
9382
.27 caliber
9394
.44 caliber
9383
.28 caliber
9395
.45 caliber
9384
.30 caliber
9396
.45 caliber rifle
9385
.31 caliber
9398
.475 caliber
9386
.32 caliber
9399
.500 caliber
9387
.33 caliber
9400
.50 caliber rifle
9388
.34 caliber
Part #
specify
These flat plate shell holders are available in 41 sizes
that correspond to the RCBS removable shell holder
numbers. This concept is a definite improvement
over the case trimmer collet system. See pages 7273, 85 for the corresponding shell holder number in your cartridge.
Part #
Shell
Part #
Shell
Part #
Shell
90301
1
90315
15
90332
32
90302
2
90316
16
90333
33
90303
3
90317
17
90334
34
90304
4
90318
18
90335
35
90305
5
90319
19
90336
36
90306
6
90320
20
90337
37
90307
7
90321
21
90338
38
90308
8
90323
23
90339
39
90309
9
90324
24
90340
40
90310
10
90325
25
90341
41
90311
11
90326
26
90342
42
90312
12
90327
27
90343
43
90313
13
90328
28
90344
44
90314
14
90330
30
90348
48
Mount your trimmer on this unit. It
provides more working room and hand
clearance. It’s a great storage space
for the flat plate shell holders for the
Manual Trim Pro and the case trimmer
pilots and shell holders. The stand mounts on an accessory base plate or
directly to your bench. Manual trimmers only. Shell holders and pilots not
included. Measures 4-7/8”x8-5/8”x1”.
Part #
90360
Description
Trim Pro Case Trimmer Stand
*HC Collet: .50 bmg / .416 Barrett, 40-60 Win, 408 CheyTac, 45-60 Win.,
450-400 3” (400 Jeffery), 50-95 Win., 505 Gibbs
Part #
Description
90352 High Capacity Case Trimmer
9364
Replacement 50 Cal. Trimmer Cutter
RCBS High-Capacity Rotary Case
Trimmer Collets - Big Bore
These collets are unique to the RCBS HighCapacity system. Their design is such that the
tightening of the collet helps align the case.
HC Collet #2: 338 Lapua, 40-65 Shiloh Sharps, 404 Jeffery, 45-70 Gov’t,
45-90 Win, 45-100 2.6” Sharps Straight, 450 Rigby Rimless
45-110 2-7/8” Sharps Straight, 45-120 3-1/4” Sharps Straight,
Part #
Description
90353 High-Capacity Trimmer Collet #1
90354 High-Capacity Trimmer Collet #2
RCBS Case Trimmer Power Drill Converter
This unit allows you to convert your Rotary
Case Trimmer to a unit powered by a hand drill.
It’s a relatively inexpensive unit, but worth the
investment.
Part #
Description
98930 Power Drill Converter
Trim Pro Case Trimmer Handle
You can upgrade your Rotary Case
Trimmer-2 by adding this lever handle shell
holder. This makes your case trimming
faster than using the old draw collet
system. It is more accurate because the
case is locked in place and aligned.
Part #
Description
90358 Trim Pro Case Trimmer Handle
RCBS Rotary Case Trimmer Collets
Description
Trim Pro Case Trimmer Shell Holders
Trim Pro Case Trimmer Stand
Trim all of your big bore cases in
no time with the new RCBS High
Capacity Case Trimmer. Designed
to handle the most beefy cases
such as the .50 bmg and .416
Barrett - plus many other favorites.
RCBS answers the call of the big
bore shooter. Includes .408”, .416”
and .50”R caliber pilots. Includes
.50 bmg collet*. Order additional collets separately.
HC Collet #1: 50-70 Gov’t, 50-90 2-1/2” Sharps Straight,
56-50 Spencer, 470 NE 3-1/4”, 500 Jeffery, 500 NE 3”.
Description
Rotary Case Trimmer Pilots
TRIM PRO Case Trimmer Shell Plate Holders
Part #
specify
case trimming equipment
These collets are unique to the
RCBS Rotary Case Timmer and
Rotary Case Trimmer-2 systems
only. Their design is such that
the tightening of the collet helps
align the case. Refer to RCBS
reference chart on pages 72-73,
85 for the collet for a specific case.
Part #
Description
9371
Rotary Case Trimmer Collet #1
9372
Rotary Case Trimmer Collet #2
9373
Rotary Case Trimmer Collet #3
9374
Rotary Case Trimmer Collet #4
Toll Free Order Line 1-866-735-6237
23
< TOC >
case trimming equipment
c a s e t r immi ng equi p ment
RCBS Trim Mate Case Prep Center
Case preparation just became five times
easier and faster with the Trim Mate Case
Prep Center. Five gear driven rotating
heads turn the tedious task of chamfering,
deburring, primer pocket cleaning, military
crimp removal and flash hole deburring
into child’s play. The 110 vac high torque
motor does all the work allowing you quick
case movement from station to station. There are two stationary positions for case neck brushes or other
accessories and a cupped area for securing dry case neck lube. The Trim
Mate is built to last and when combined with the Trim Pro Power Case
Trimmer turns case preparation into an automated process. The Trim
Mate Case Prep Center includes large and small primer pocket brushes,
inside chamfering and outside deburring tool, medium and small case
neck brushes and a packet of dry case neck lube. There are a number of
optional accessories available. *Two year limited warranty.
Part #
90375
90376
Description
Trim Mate Case Prep Ctr- 110v US
Trim Mate Case Prep Ctr- 240v Eur
50 bmg crimp
primer pocket
Description
remover
uniformer
Dry Case Neck Lube
Primer Pocket Uniformer, large Carbide
Primer Pocket Uniformer, large pistol Carbide
Primer Pocket Uniformer, small Carbide
Carbide Chamfer Tool
Carbide Debur Tool
VLD Deburring Tool
carbide
carbide
50 BMG Primer Pocket Uniformer Carbide
deburr tool
chamfer tool
50 BMG Military Crimp Remover
Primer Pocket Brush, large
primer pocket brush
Primer Pocket Brush, small
Dust Cover-Trim Mate Prep Center
Trim Mate Military Crimp Removers-2
Redesigned to speed up case processing and
reduce the amount of primer pocket being cut
away from military crimped primer pockets.
Part #
90386 90387 Description
TM Military Crimp Remover-2 Small
TM Military Crimp Remover-2 Large Features & Benefits
24
The RCBS Hand Case Neck Turner is designed to “peel” the brass
from the outside of your case necks to a consistent thickness. Most
commercially available brass has variances in the case neck thickness.
This leads to case neck concentricity and bullet runout issues. Truing
up the neck cases produces more consistent and accurate hand loaded
ammunition. The cutter portion uses caliber specific pilot/mandrels (sold
separately) to guide the case neck. The cutter design features the ability
to “zero” the cutter to the pilot/mandrel and then use the micrometer
adjustment to dial the desired case neck thickness in .0005” increments.
The cutter can also be set for right or left-handed use. The Quick Change
Case Holder has many advantages over the competition. Most other
units use a “tap wrench” design to hold cartridge cases. Though this
is great for threading holes with a self-feeding tap, it does nothing to
feed your case neck to the cutter. The RCBS Quick Change Case Holder
features an ergonomic design that allows you to rotate the case AND
put forward pressure to feed the case neck to the cutter. The quick case
change feature helps to speed up
the process without having to use
small, obtrusive thumbscrews.
• Micrometer Adjustment .0005”
• Right or Left-Handed Use
• Ergonomic Case Holder
• Ability to “Zero” the cutter to pilot / mandrel
• RCBS Lifetime Warranty
Part #
90401
Description
HC Neck Turner Kit with QC case holder
Hand Neck Turner Pilots
For use with the RCBS Hand Case Neck Turner.
Part #
Description
Part #
Description
Part #
Description
90405
.17 Caliber
90413
.30 Caliber
90421
.40 Caliber
90406
.20 Caliber
90414
.31 Caliber
90422
.41 Caliber
90407
.22 Caliber
90415
.32 Caliber
90423
.416 Caliber
90408
.24 Caliber
90416
.33 Caliber
90424
.44 Caliber
90409
.25 Caliber
90417
.34 Caliber
90425
.45 Caliber
90410
.26 Caliber
90418
.35 Caliber
90426
.475 Caliber
90411
.27 Caliber
90419
.36 Caliber
90427
.500 Caliber
90412
.28 Caliber
90420
.37 Caliber
Description
Hand Case Neck Turner Pilot
RCBS Case Neck Turner with Auto-Feed
Replacement carbide tipped cutters for your Trim Pro Case Trimmer, and
3-Way Cutter. These carbide tipped tools cut clean and stay sharp for a
lifetime of use.
Part #
Description
90250 TP Case Trimmer Cutter Head Carbide
90251 TP 3-Way Cutter Head Carbide*
*NOTE: Not for .17 to .20 caliber.
RCBS Hand Case Neck Turner with
Quick Change Case Holder
Part #
specify
Carbide Replacement Tools
• Stay sharp carbide tipped tools
• RCBS Limited Lifetime Warranty
neck turning systems
Features & Benefits
RCBS Prep Center Accessories
Part #
90377
90378
90383
90379
90384 90385 9351
9561
9562
9577
9578
90382
HUNTINGTON DIE SPECIALTIES - 2014
case trimmer
carbide cutter
The neck turner gives you a precise
easy way to remove high spots
and case neck out of roundness
on the outside of the neck. The
auto-feed allows you to advance
the cutting tool over the case
neck with each turn of the trimmer
handle. Includes Case Neck Turner and Auto Feed Components. This unit
is only adaptable with the RCBS Rotary Case Trimmer-2, Trim Pro & Trim
Pro-2 Manual Case Trimmers.
NOTE: Not to be used with Trim Pro-2 Power Case Trimmer.
3-way carbide
cutter head
Part #
98860
Description
Case Neck Turner with Auto-Feed
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
n e c k t ur n i ng syst ems
f o rst e r case t ri mm i ng e q u i pm en t
Forster Hand Case Trimmer
RCBS Case Neck Turner
Forster offers a premium line
of case trimmers. These units
will trim from .17 caliber to .45
caliber. Accuracy is Forster’s
main concern. The unit uses
a Brown & Sharpe type collet
to hold the case. This insures
uniform case lengths even when there is a variation in the rim diameter.
Versatility is the other unique feature of this trimmer. Forster offers six
different case conditioning accessories for this unit. You can inside ream,
outside neck turn, debur, hollow point bullets, clean primer pockets and
chamfer military primer pockets. They offer case trimmer kit with three of
the most popular collets and six of the most popular pilots. The trimmer
bases are available in short, standard, and long lengths.
This is the same unit as described above
without the auto-feed unit. The case neck
turner require the use of a specific Case Neck
Turner Pilot-Reamer (sold separately).
Part #
98861
case trimming equipment
Description
Case Neck Turner (less pilot-reamer)
RCBS Neck Turner Pilots-Reamers
The case neck turners require a special pilot
for each caliber. The pilot is also an inside neck
reamer, which allows you to clean out the inside
of the neck while turning the outside.
Part #
Description
Part #
Description
Part #
Description
98877
17 Caliber
98881
6.5mm
98886
8mm
98876
20 Caliber
98882
270 Caliber
98887
338 Caliber
98878
22 Caliber
98883
7mm
98889
35 Caliber
Part #
Description
CT1010 Case Trimmer (standard base)
CTK100* Case Trimmer Kit (w/ collets, pilots)
PA1000 Case Trimmer Power Adaptor
98879
6mm
98884
30 Caliber
98891
375 Caliber
98880
25 Caliber
*Collets- #1, #2 & #3. Pilots- .22, .24, .25, .27, .28 & .30
Part #
specify
Description
Neck Turner Pilot-Reamer
RCBS Trim Pro 3-Way Cutter
This is automated case preparation at its finest. The 3-Way Cutter is one
of those accessories you can’t live without. The unique three-blade head
configuration trims cases like our standard cutting tool, but in addition to
trimming to length, inside blades chamfer the case while an outside blade
deburrs it. The 3-Way Cutter attaches easily to both RCBS Rotary Case
Trimmers and Trim Pros.
Part #
90276
90277
90278
90279
90280
90281
90282
90283
90284
90285
90287
90291
90251 Description
Trim Pro 3-Way Cutter .17 caliber
Trim Pro 3-Way Cutter .20 caliber
Trim Pro 3-Way Cutter .22 caliber
Trim Pro 3-Way Cutter 6mm caliber
Trim Pro 3-Way Cutter .25 caliber
Trim Pro 3-Way Cutter 6.5mm caliber
Trim Pro 3-Way Cutter 270 caliber
Trim Pro 3-Way Cutter 7mm caliber
Trim Pro 3-Way Cutter .30 caliber
Trim Pro 3-Way Cutter .32 caliber
Trim Pro 3-Way Cutter .338 caliber Trim Pro 3-Way Cutter .375 caliber TP 3-way Carbide Cutter Head
CTC400
CTC417
CTB101
CTB102
CTB103
CTH04
Case Trimmer Cutter Shaft
Case Trimmer Cutter Shaft - 17 Cal
Standard Case Trimmer Base (5-3/8”)
Short Case Trimmer Base (4-5/8”)
Long Case Trimmer Base (6-1/2”)
Case Trimmer #4 Collet Housing
Forster Case Trimmer Collets
Forster Collets for the case trimmer are designed to operate as the Brown
& Sharpe collets do. The collet closes on the rim of the case without
pulling the case back. This insures uniform case lengths even when there
is variation in rim diameter.
Part #
CT2001
CT2002
CT2003
CT2004
Description
Forster Case Trimmer #1 collet
Forster Case Trimmer #2 collet
Forster Case Trimmer #3 collet
Forster Case Trimmer #4 collet*
See Page 70 for Collet and Pilot Reference. *#4 Collet requires a #4 Collet Holder.
Forster Case Trimmer Pilots
Forster Pilots are unique to the Forster system and are not interchangeable with other case trimmers. The pilots are case hardened.
CT1017*
17 Cal
CT1033
333 Cal
CT1432
CT1020
20 Cal
CT103-
.338
CT1452
44 Cal
45 Cal
CT102-
.223
CT1034
.348
CT1455
45 Colt
Trim Pro 3-Way Pilot
CT1022
.224
CT1035
.357
CT1458
45 Rifle
Now you can change your Trim Pro 3-Way Cutter to
another caliber without buying a complete cutting head.
CT1024
6mm
CT1351
9mm
CT1468
.4645"
CT1025
25 Cal
CT1368
9.3mm
CT1474
.4705"
CT1026
6.5 mm
CT1375
375 Cal
CT1483
.4795"
CT1027
270 Cal
CT1400
40 Cal
CT1489
.4855"
CT1028
7mm
CT1405
.4015"
CT1500
.4965"
CT1030
30 Cal
CT1410
41 Cal
CT1505
.5015"
Part #
Description
Part #
Description
Part #
Description
90256
.17 Cal
90260
.25 Cal
90264
.30 Cal
90257
.20 Cal
90261
6.5mm
90265
.32 Cal
90258
.22 Cal
90262
.270 Cal
90267
.338 Cal
90259
6mm
90263
7mm
90271
375 Cal
Part #
specify
Description
Trim Pro 3-Way Pilot-Chamfer
CT1031
.311
CT1416
416 Cal
CT1510
.5065"
CT1032
32 Cal
CT1422
.4185"
CT1513
.5085"
Part #
specify
Description
Forster Case Trimmer Pilot
* Required a .17 cal. cutter shaft
Toll Free Order Line 1-866-735-6237
FORSTER PRODUCTS continued
25
< TOC >
case trimming equipment
f o r s ter c a s e trimm ing e quip me nt
Classic 50
The “Classic 50” is suitable for
more than 100 different big bore
calibers from popular big game
rifles to classic black powder
calibers. For collectors of
vintage firearms, for “Cowboy”
competitors and re-enactors,
and for owners of fine English
single- and double rifles
chambered in hard hitting calibers like 500 Nitro Express, 416 Rigby, 50
Sharps, 470 NE, etc. This hand case trimmer ensures accurate reloading.
Collets & pilots for the “Classic 50” case trimmer are available separately
or as a complete kit.
Part #
Description
CLCT00 Classic 50 Case Trimmer
CTK300 Classic 50 Case Trimmer Kit*
HUNTINGTON DIE SPECIALTIES - 2014
Forster Power Case Trimmer
This unit is designed to trim faster than the hand
operated trimmer. If you are into high volume
reloading, this is the tool for your bench. The
Power Case Trimmer can be used with any
standard drill press. Case length is controlled
by the stop on your drill press. An alignment bar
is furnished with the kit to align the trimmer and
drill press spindle. The cutter shaft is made with
a 1/4” hardened steel shank. The cutter has four
staggered cutting edges to eliminate the chatter
on the case mouth. The unit uses the same
collets & pilots as the regular case trimmer.
Part #
Description
PT1010 Power Case Trimmer (less collets/pilots)
PCT400 Power Case Trimmer Shaft
* Forster Collet & Pilot Reference Table - page 70
forster accessories
*Includes 3 pilots - 458, 505 & 510 and 3 collets - #5, #6, #7
Forster Primer Pocket Center and Cleaner
Forster “Classic .50” Collets
CT2005
CT2006
CT2007
CT2008
Part #
specify
The Primer Pocket Cleaner insures consistent primer
detonation by cleaning the powder residue left in the
primer pockets after firing. If the residue is not cleaned
out of the pocket, the primer will not seat properly. The
scraper is mounted in the cutter shaft in place of the pilot.
The center is placed in the collet. The same center is used
with both large and small scrapers. This method is more
accurate and faster than using a hand held scraper.
#5
#6
#7
#8
Description
Forster 50 Cal. Case Trimmer Collet
* Forster Collet & Pilot Reference Table - page 70
Forster “Classic .50” Pilots
CT1405
CT1422
CT1468
CT1474
CT1483
CT1505
CT1510
CT1513
Part #
specify
40-70 WCF & 405 WCF
404 Jeffery Rimless Nitro Express
465 Nitro Express
470 Nitro Express
475 Nitro Express 3-1/2”
505 Gibbs
50-90 Sharps & 50-140 Sharps 3-1/4”
50-70 Government
Description
Forster .50 Cal. Case Trimmer Pilot
Description
Primer Pocket Cleaner .175”
Primer Pocket Cleaner .215”
Primer Pocket Center
Forster Primer Pocket Chamfering Tool
When reloading military brass, the crimp must be removed
from the primer pocket, before seating a new primer. Here
is the quickest and most accurate way to do this. The tool
fits both small and large primer pockets and may be used
with either the hand or power case trimmers. Use this tool
with the primer pocket center (#PPCE02).
Forster Deburring Tools & Accessories
Enthusiasts of the 50 Cal. bmg
cartridge now have access to
a reloading tool to help them
economize on the high cost of
ammunition. The 50 bmg Case
Trimmer is designed specifically
for the reloading needs of 50
bmg shooters. It doesn’t require a collet and comes complete with pilot
and an integrated rim holding device.
The Forster Deburring Tool offers the reloader a quality tool with two
convenient ways to use it. You can use the unit free hand, you can use it
in a DBT base. DB1000 Deburring tool is made in the U.S.A.
Part#
Description
DB1000 Deburring Tool
DB2000 DBT Base ( less deburing tool)
Part #
Description
50BMGCT 50 bmg Case Trimmer
26
primer pocket
center
Part#
Description
PPCT01 Primer Pocket Chamfering Tool
* Forster Collet & Pilot Reference Table - page 70
British, Metric & American, Obsolete Standard Calibers
50 Cal. BMG Case Trimmer
Part#
PPC175
PPC210
PPCE02
primer pocket
cleaner
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
f o r s ter c a s e trimm ing e quip me nt
Forster Universal Hollow Pointer
Bullets or assembled rounds can be
hollow-pointed for increased expansion
on impact. This do-it-yourself hollow
pointing tool offers an unlimited variety of
hollow-pointed rounds. This can mean
a significant saving. The larger drill is
recommended for pistol cartridges and
the small drill for rifle. (Case Trimmer not
included.)
Part #
Description
HP1008 Univ. Hollow Pointer - Pistol (1/8”)
HP1016 Univ. Hollow Pointer - Rifle (1/16”)
f o r ster turning & reaming too ls
Forster Outside Neck Turner
The Forster Outside Neck Turner will
turn your case neck concentric to its
true axis. It is superior to any hand
held turner that is centered by only the
pilot. This unit produces neck walls of
uniform thickness and exact outside
neck diameters. The unit consists of a
cutter head which carries an adjustable
circular carbide cutter. The tool will turn
any diameter between .17” and .375”.
(Note: .17” caliber requires special length carbide cutter and the .17”
caliber case turner collet shaft.) The short pilot used in case trimming
is replaced by an extra long, hardened and ground pilot. As the wall of
the neck passes progressively between the pilot and the cutter, the neck
wall is reduced to a uniform thickness. You can control the rate of feed
by rotating the feeder cam and a mechanical stop controls the length
of the cut. To change calibers, just change pilot and make the cutter
adjustments. Remember that cases to be neck turned must first have the
neck resized and expanded. (Case Trimmer not included.)
Part #
Description
OT1010 Outside Neck Turner (less pilot)
*Note: For use with Forster case trimmers only!
Outside Neck Turner Pilots
Part #
Bullet Dia.
Pilot Dia.
Part #
Bullet Dia.
Pilot Dia.
OT2017*
.172"
.1685"
OT2308
.308"
.3055"
OT2204
.204"
.2015"
OT2311
.311"
.3085"
OT2224
.224"
.2215"
OT2323
.323"
.3205"
OT2243
.243"
.2405"
OT2333
.333"
.3305"
OT2257
.257"
.2545"
OT2338
.338"
.3355"
OT2264
.264"
.2615"
OT2358
.358"
.3545"
OT2277
.277"
.2745"
OT2375
.375"
.3725"
OT2284
.284"
.2815"
Part #
specify
case trimming equipment
Forster Neck Reamers
Pressure inside the rifle causes the
brass to flow forward until it becomes
necessary to remove the excess material
from the neck walls. The Forster Neck
Reamer (mounted in the cutter shaft in
place of the pilot), removes that excess
brass. The Neck Reamer is made of
high grade, wear resistant tool steel and
is ground to special tooth design so the
brass is cut smoothly, without chattering. Neck reaming is normally done
after firing and before you full length or neck size the case. Wall thickness
may be measured with a tubing micrometer, but for a faster check, slide
a bullet into the unsized neck of a fired case. If you feel interference, then
it’s time for inside neck reaming or outside neck turning. (Case Trimmer
not included.)
(+) These reamers are for those reloaders who ream their cases after the
sizing operation and before seating bullets.
Part #
Bullet Dia.
Reamer Dia.
Part #
Bullet Dia.
Reamer Dia.
NR1017*
.171"
.1730"
NR1311
.311"
.3135"
NR1204
.204"
.2065"
NR1323
.323"
.3255"
NR1220+
.224"
.2200"
NR1338
.338'
.3405"
NR1223
.223"
.2255"
NR1355
.355"
.3575"
NR1224
.224"
.2265"
NR1358
.358"
.3605"
NR1239+
.243"
.2390"
NR1375
.375"
.3780"
NR1243
.243"
.2455"
NR1400
.40"
.4025"
NR1257
.257"
.2595"
NR1410
.41"
.4125"
NR1264
.264"
.2665"
NR4275+
.429"
.4275"
NR1277
.277"
.2795"
NR1432
.430"
.4325"
NR1284
.284"
.2865"
NR1452
.452"
.4545"
NR1308
.308"
.3110"
NR1458
.458"
.4605"
Part #
specify
Description
Forster Neck Reamer
(*) Required a .17 cal. cutter shaft. (+) Used for neck reaming after resizing.
Forster Trimmer Accessory Case
This handy case solves the awkward
problem of storing your Forster
accessories in a convenient and
space saving manner. The accessory
case holds the Case Trimmer Collets,
Pilots, the Outside Neck Turner and
Pilots, Neck Reamers, Primer Pocket
Chamfering Tool with the center and
primer pocket cleaners. The unit
offers double wall construction to
give the case superior strength and
yet is lightweight. What an inexpensive and practical addition to your
loading bench. (Does not include accessories shown).
Part #
Description
AC5000 Trimmer Accessory Case only
Description
Outside Neck Turner Pilot
* Required a .17 cal. cutter shaft and a .17 cal. carbide cutter.
Toll Free Order Line 1-866-735-6237
27
< TOC >
trim dies
HUNTINGTON DIE SPECIALTIES - 2014
Trim Dies Price Group B
RCBS TRI M die s
RCBS Trim Dies
RCBS offers a complete line of conventional trim dies.
These dies are a sure way of checking and adjusting case
length. You lube the case and insert it into the die. Trim off
anything that protrudes from the top of the die either by
filing the case down flush with the top of the die, or cutting
the excess off with a hacksaw and filing the case down.
Don’t worry about ruining the top of the die, it is heat treated and can
withstand a file’s surface. The ideal file to use is a mill bastard. The best
hacksaw blade to use is 32 teeth per inch. After trimming the case deburr
it with a Deburring Tool, full length resize.
When RCBS recommends using a Trim Die to reform cases, you will need
to either; neck ream or neck turn, then reanneal the cases.
Trim dies are available in the most popular calibers listed. *Some presses
require an extend shell holder when using an RCBS Trim Die (see RCBS
Reference Section, page 84).
Note: RCBS will no longer be making Trim Dies for new calibers. If not in stock
allow 4 to 6 weeks for delivery. Prices vary with their demand.
Trim Dies - Price Group A
17265
17 Remington *
34865
7mm-30 Waters
10265
22 Hornet *
33565
7.5 Swiss / S.R.*
10665
22-250
14365
7.65x53 Blgm Mauser
10065
218 Bee *
14465
7.7 Jap. Arisaka
10765
220 Swift
14065
280 Remington
10865
221 Rem. Fireball
34065
7x64 Brenneke
10965
222 Remington
14665
30-30 WCF
11065
222 Remington Mag
14765
30-40 Krag
11165
223 Rem. (5.56mm)
14865
30-06 Springfield
33265
240 Weatherby Mag
15365
300 Win. Mag
11465
243 Winchester
29565
30-378 Wby. Mag
22665
6mm PPC
15165
300 Savage
11565
6mm Remington
15265
300 Weatherby Mag
12265
250 Savage
17665
300 Rem. Ultra Mag
12565
257 Roberts
30865
300 Win. Short Mag
12665
257 Weatherby
31265
300 Rem. SAUM
12065
25-06
15765
32 Win. Special
11865
25-20 WCF *
35065
7.62x39 .308/311
20065
32 ACP *
18665
18265
357 Magnum *
18765
44 Magnum *
44 Special *
18365
38 Special *
18865
44-40 WCF *
45 ACP *+
20565
9mm Luger *
18965
22365
9x21 *
19165
45 Colt *
20465
380 ACP *
23265
454 Casull *
22165
40 S&W *
35265
480 Ruger *
21665
10mm Auto *
22265
50 AE *
18565
41 Magnum *
Part #
Description
specify Trim Die - Price Group B
(*) Requires extended shell holder (pg 84). (+) Not for use with .45 Auto Rim/45 GAP.
Trim Dies - Price Group C
18065
30 Carbine *
35565
20665
375 Winchester
24165
450 Marlin
458 Lott
20765
444 Marlin
20865
458 Win. Mag
20965
45-70 Govt.
Part #
Description
specify Trim Die - Price Group C
May not be in stock, allow 4-6 weeks for delivery. (*) Requires extended shell holder.
Trim Dies - Price Group D
26265
22 K Hornet
15065
10465
22 Remington Jet *
29165
300 H&H
7.5 MAS
26365
5.6x50R *
32565
32-40 Winchester
11765
5.7x28 FN *=
32665
8mm-06
33865
22 Savage HiPower
34465
8x68S Magnum
32265
257 Roberts Ackly Imp.
16765
338-06
27865
6.5x06
33665
348 Winchester
27765
6.5x54 MS
33765
350 Remington Mag
32865
6.5x57 Mauser
17965
376 Steyr
27965
6.5x68S
34665
9.3x74R
34165
7mm Remington BR *
33065
378 Weatherby Mag
26765
7x65R
17565
400 CorBon
25165
30 Mauser
22765
416 Remington Mag
29265
30 Remington
22865
416 Rigby
29465
30-338 Win. Mag
33165
460 Weatherby Mag
15665
308 Norma Mag
12165
25-35 WCF
29065
7.62x54R Russian
12765
264 Winchester Mag
15465
303 British
12865
260 Remington
15565
308 Winchester
13265
6.5x55
15965
8x57 (8mm Mauser)
13565
270 Winchester
16065
8mm Remington Mag
31365
270 Win. Short Mag
16665
338 Lapua
13465
270 Wby. Mag
16365
338 Winchester Mag
14165
284 Winchester
17765
338 Rem. Ultra Mag
21065
25 ACP *
23065
9mm Makarov *
25065
30 Luger* (7.65mm)
16865
338-378 Wby. Mag
18165
32-20 WCF *
20265
38 ACP/Colt Spr Auto*
13665
7mm Remington Mag
30665
340 Weatherby Mag
20165
32 S&W L*+
35665
38-40 WCF *+
358 Winchester
21365
327 Fed *
31165
7mm Rem. SAUM
32765
13865
7x57 (7mm Mauser)
30765
35 Whelen
26665
7mm STW
16565
35 Remington
357 SIG *
34265
7mm T/CU *
23165
17865
7mm Ultra Mag
34565
9.3x62
13765
7mm Wby. Mag
16965
375 H&H Mag
31465
7mm Win. Short Mag
30965
375 Rem. Ultra Mag
13965
7mm-08
Part #
Description
specify Trim Die - Price Group D
(*) Requires extended shell holder (pg 84). (=) Includes extended shell holder.
Trim Dies - Price Group E
Part #
Description
specify Trim Die - Price Group E
(*) Requires extended shell holder. (+) Not for use with .327 Fed Mag
Trim Dies - Price Group F (Legacy)
36565
38-55 WCF
19465
45-2.6 SS
23365
40-65 Shiloh
19565
45-110 SS
405 Winchester
19665
45-120 SS
Print to PDF 23665
without this message
by purchasing
novaPDF (http://www.novapdf.com/
Part #
Description
19265
40-70 SS
36865
50-70
specify Trim Die - Price Group A
19365
45-90
19765
50-90 SS
May not be in stock, allow 4-6 weeks for delivery. (*) Requires extended shell holder.
Part #
Description
specify Trim Die - Price Group F
28
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
RCBS she ll holde rs
RCBS Shell Holders
These heat-treated shell holders are compatible
with RCBS reloading presse and single-stage
presses made by manufacturers other than RCBS.
See the shell holder chart in the reference section,
page 72-73, 89.
shell holders
RCBS Pro 2000 Five Station Shell Plates
No. 1
88801
No. 16
88816
No. 31
88831
No. 2
88802
No. 17
88817
No. 32
88832
No. 3
88803
No. 18
88818
No. 33
88833
No. 4
88804
No. 19
88819
No. 34
88834
No. 5
88805
No. 20
88820
No. 35
88835
No. 6
88806
No. 21
88821
No. 36
88836
9201
Shell holder #1
9226
Shell holder #26
No. 7
88807
No. 22
88822
No. 37
88837
9202
Shell holder #2
9227
Shell holder #27
No. 8
88808
No. 23
88823
No.38
88838
9203
Shell holder #3
9228
Shell holder #28
9204
Shell holder #4
9229
Shell holder #29
No. 9
88809
No. 24
88824
No. 39
88839
9205
Shell holder #5
9230
Shell holder #30
No. 10
88810
No. 25
88825
No. 40
88840
9206
Shell holder #6
9231
Shell holder #31
No. 11
88811
No. 26
88826
No. 41
88841
9207
Shell holder #7
9232
Shell holder #32
No. 12
88812
No. 27
88827
No. 42
88842
9208
Shell holder #8
9233
Shell holder #33
No. 13
88813
No.28
88828
No. 43
88843
9209
Shell holder #9
9234
Shell holder #34
No.14
88814
No. 30
88830
No. 44
88844
9210
Shell holder #10
99235
Shell holder #35
No. 15
88815
No. 45
88845
9211
Shell holder #11
99236
Shell holder #36
9212
Shell holder #12
99237
Shell holder #37
9213
Shell holder #13
99238
Shell holder #38
9214
Shell holder #14
99239
Shell holder #39
9215
Shell holder #15
99240
Shell holder #40
9216
Shell holder #16
99241
Shell holder #41
9217
Shell holder #17
99242
Shell holder #42
9218
Shell holder #18
99243
Shell holder #43
9219
Shell holder #19
99244
Shell holder #44
9220
Shell holder #20
99245
Shell holder #45
No.1
87601
No.11
87611
No.21
87621
9221
Shell holder #21
99246
Shell holder #46
No.2
87602
No.12
87612
No.23
87623
9222
Shell holder #22
99247
Shell holder #47
No.3
87603
No.15
87615
No.24
87624
9223
Shell holder #23
99248
Shell holder #48
No.4
87604
No.16
87616
No.25
87625
9224
Shell holder #24
99249
Shell holder #49
No.6
87606
No.17
87617
No.26
87626
9225
Shell holder #25
No.7
87607
No.18
87618
No.27
87627
No.9
87609
No.19
87619
No.28
87628
No.10
87610
No. 20
87620
No.30
87630
No. 32
87632
Part #
specify
Description
Shell Holder
RCBS Special Order Shell Holders
RCBS offers a number of shell holders that will not fit in the standard
numbering system. These are shell holders that have to order by specific
cartridge. The following is a partial listing. If you don’t find what you want,
contact us at (530) 534-1210 and we will make every effort to supply you
with what you need.
Part #
Description
specify AmmoMaster Shell Plates
For specific description of shell plate,
see Reference Section page 72-73, 77.
RCBS 4x4 Shell Plates
Part #
Description
specify 4x4 Shell Plate
For specific description of shell plate,
see Reference Section page 72-73, 77.
5.45x18
11.4mmx51 R
425 W.R.
6mm Lee Navy
17 CCM
Brenneke 450x400
6.5mmx68R
22 CCM
450 N.E.
6.5mmx70R
25-20 SS
450-400 3" & 3-1/4"
7x61 S & H
25-25 Stevens
475 #2 N.E.
7.62mm R Nagant
28-30 120 Stevens
450 #2
___________________________________________________
7.65 French MAS
276 Pederson
500-465 N.E.
7x66 Vom Hofe
280 Ross
500-450
___________________________________________________
NOTES: ____________________________________________
___________________________________________________
___________________________________________________
8mm Lebel
310 Martini Cadet
50-95 WCF
___________________________________________________
8mm Kropatchek
375 Flanged Mag
577 N.E.
9mm Police
41 Long Colt
577-450 M.H.
___________________________________________________
9x18 Ultra
40-50 SS
577 Snider
___________________________________________________
9.3x64
40-90 SS Original
600-577 N.E
10.3mmx60R
401 Herter Mag
600 N.E.
___________________________________________________
11mmx59 F Gras
401 Win. S.L.
Part #
57170
Description
Special Shell Holder- (specify)
___________________________________________________
___________________________________________________
Toll Free Order Line 1-866-735-6237
29
shell holders / bullet casting equipment
< TOC >
RCBS she ll holde rs
RCBS Extended Shell Holders
When you are using short case forming or trim dies, you need to extend
the length of your ram in some presses. There are six standard stock, plus
special order. We can accommodate you with special competition shell
holders as well. See page 77, 84 for application chart.
Part #
8952
8953
8956
8960
8968
8995
Description
#2 Extended Shell Holder
#3 Extended Shell Holder
#6 Extended Shell Holder
#10 Extended Shell Holder
#18 Extended Shell Holder
#45 Extended Shell Holder
Special order shell holders- 1-1/4”
#1
#3
#4
#5
#7
#9
#11 #12 #13 #14
#16 #17 #19 #20 #21
#25 #26 #27 #28 #29
#32 #33 #35 #36 #38
RCBS Competition Extended Shell Holders
These extended shell holders are designed to exclusively for use with
RCBS Competition-Series seating dies. (see page 39, 77, 78.)
Part #
38252
38253
38260
38262
38279
38280
Description
#2 Competition Extended Shell Holder
#3 Competition Extended Shell Holder
#10 Competition Extended Shell Holder
#12 Competition Extended Shell Holder
#38 Competition Extended Shell Holder
#43 Competition Extended Shell Holder
Competition Extended Shell Holders - Special Order
These special order extended shell holders are designed to exclusively
for use with RCBS Competition-Series seating dies. (see page 39, 77, 78.)
#1
#4
#13 #16
#23 #24
#30 #32
7x66 V-H
#8
#15
#23
#30
#40
Special order shell holders- 1-1/2”
#1
#2
#4
#6
#7
#8
#10 #11 #12 #14 #16 #17
#18 #19 #20 #21 #22 #23
#25 #26 #27 #29 #32 #35
#36 #39
57171 S.O. Extended Head Shell Holder- 1-1/4” (specify)
57172 S.O. Extended Head Shell Holder- 1-1/2” (specify)
Special Order are non-cancellable and non-refundable. 90 to 120 days from RCBS.
Hornady Universal Shell Holder Extension
Precision machined from solid steel then heat treated for the life of the
press. They accept all RCBS shell holders. Set screw secures shell holder.
Part #
Description
392171 Hornady Universal Shell Holder Extension
RCBS Herters Adapter
This unit is made from the standard priming tool ram.
This adapter will accept standard removable type shell
holders. Because of the length of the adapter and the
size of the hole in most shell holders, you can not prime
using this adapter. This adapter will fit any Herters press
which secures the shell holder with hex head screws.
Part #
99200
HUNTINGTON DIE SPECIALTIES - 2014
Description
Herters Adapter
Part # 57173
#9
#19
#27
#11
#21
#28
Description
S.O. Competition Extended Shell Holder - (specify)
Special Order are non-cancellable and non-refundable. 90 to 120 days from RCBS.
RCBS Shell Holder Rack
Here is a great product. The rack holds
24 shell holders (two per post) and an
additional six Trim Pro Case Trimmer shell
holders. The rack comes with a clear see
through cover and can be mounted on the
wall or used on your reloading bench. If
you fill up the rack, you can snap another
rack on to it for additional storage. This is
an investment worth making.
Part #
9461
Description
Shell Holder Rack
Die Plate / Shell Plate Rack
Keep your Pro2000, PiggyBack five station
shell plates organized. This handy rack can
be mounted horizontally on your bench or
vertically on the wall. The stamped steel
rack securely holds your preset die plate
and a side slot keeps the five station shell
plate in place. An identification label is also
included. (Die plate & dies not included).
Part #
88881
RCBS “C” Type Ram
#6
#7
#17 #18
#25 #26
#34
9.3x64 Bren.
Description
Die Plate / Shell Plate Rack
This unit will fit most of the older
“C” type presses. In addition, it
fits the RCBS RS press and JR
press. The unit is designed to handle any standard shell holder head.
Part #
9109
Description
C, RS, & JR Type Shell Holder Ram
RCBS “H” Type Ram
This ram is designed to fit the Hollywood and some C
& H model tools. This unit accepts any modern shell
holder head. 1/2”-20 thread.
Part #
9180
30
Description
H-Type Shell Holder Ram
Our catalog is also available online!
www.huntingtons.com
( 1-866-RELOADS 8 [email protected]
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
bul l et c asting equip me nt
RCBS Pro-Melt Electric Furnace
This unit is an electrically heated lead
furnace. Heavy-duty construction
includes an Incoloy shielded heat
unit and snap action industrial quality
thermostat. The furnace is accurate
and responsive. The thermostat is
coupled to the remote sensor on the
bottom surface of the pot. This unit
can be set up for left or right handed
operation and has a capacity of 22
lbs. (10 kilos). Range 650°-850° F,
800 watts. *Two year limited warranty.
Part #
81100
81200
Part #
80015
Description
Pro-Melt Electric Furnace 120v US
Pro-melt Electric Furnace 240v Eur
Description
Lead Dipper
RCBS Bullet Lubricant
Description
Bullet Mould Handles
RCBS has given you the best of two worlds.
They offer a non-Alox based lube for lower
velocity pistol bullets, and they offer an Alox
and beeswax blend rifle lube for higher velocity
bullets. Rifle lube for outdoor use only.
Part #
Description
80008 Pistol Bullet Lubricant (low velocity)
80009 Rifle Bullet Lubricant (high velocity)
SPG Bullet Lubricant
This is a new addition to the RCBS line,
which is a real help to the bullet caster.
In order to cast the best bullets, you
need to know the exact temperature of
your casting material. With a 1000° F
range and an 1% accuracy, this thermometer gives you the exact reading
and a handle to protect you from the heat of the lead. A must on every
casting bench.
Description
Lead Thermometer with Handle
RCBS Ingot Mould
Mike Venturino first brought this bullet lube to
our attention. It was originally developed for
black powder shooters. After a wide range
of testing, it turned out to be an excellent allpurpose bullet lube. This product would be
worth it at twice the price.
Part #
Description
SPG100 SPG Bullet Lubricant
Brownells Marvelux
When you need to flux your melted lead this is your best
choice - it’s the leader in the casting field.
Part #
Description
B01
Brownells Marvelux-1 lb. Container
Montana Armory Lube Ribbon Extruder
This unit is for casting your lead into
useable 1 lb. units. The mould is made of
heavy cast iron.
Description
Ingot Mould
RCBS Mould Mallet
Be kind to your bullet moulds. Stop using a metal object to tap your cast
lead bullets and potentially damaging your mould. RCBS has introduced
our wooden mould mallet to safely
accomplish this goal.
Part #
80007
Description
Lead Pot
This is a cast iron dipper with
a large capacity bowl for easy
scooping and pouring of lead. The tapered pouring spout fits snugly into the
sprue-cutter pouring hole.
RCBS Lead Thermometer with Handle
Part #
80005
This pot is heavy-duty cast iron for blending and
casting bullet alloys. The unit holds 10 lbs. of metal.
The pot has a flat bottom with a pour spout, a table
litter for gripping the pot with pliers.
RCBS Lead Dipper
This pair of handles has a solid steel frame with an extra long hardwood
handle that stays cool and provides a comfortable distance from the hot
bullet mould metal surfaces.
This set of handles fit RCBS
moulds exclusively.
Part #
81175
RCBS Lead Pot
Part #
80010
RCBS Bullet Mould Handles
Part #
80025
bullet casting equipment
Description
Mould Mallet
This unit is designed for use
with a standard reloading
press. It extrudes a 1/8” thick
by 1” wide ribbon of lube. It
gives you the option of cutting
a 1/8” cookie of lube to seat under your bullet keeping the black powder
fouling soft in your barrel. If you are a serious black powder shooter, this
is a unit you should consider.
Part #
Description
MR100 Montana Armory Lube Ribbon Extruder
Montana Armory Lubricant
California Prop. 65 Warning:
Melting lead and casting lead objects (with these products)
will expose you and others in the area to lead, which is known
to cause birth defects, other reproductive harm, and cancer.
This is a traditional black powder lubricant at its best. This lube is
designed to keep the fouling down in your barrel. And at five pack of
lube this is a reasonable price. 5 pack.
Part #
Description
MR200 Montana Armory Bullet Lubricant
Toll Free Order Line 1-866-735-6237
BULLET CASTING EQUIPMENT continued
31
bullet casting equipment / bullet moulds
< TOC >
bul l et c asting equip me nt
Black Powder Cartridge Over Power Wads
Part #
BP40
BP45
BP50
bu lle t m o u lds
RCBS Bullet Moulds
RCBS Bullet Moulds are constructed of the best
quality of Pearlitic malleable iron. The blocks
are ground to achieve an exact tolerance. The
locating pins are case hardened to limit wear and
to provide permanent alignment for the bullet
cavities. Bullet cavities are hand-machined to
form a perfect match. The Sprue cutter is a solid
steel plate that holds firmly against the mould block with an adjustable
pressure washer. RCBS, Saeco, and Lyman 4 cavity handles will normally
fit RCBS moulds. Reference your bullet profile in the Bullet Mould
reference section on pages 81-84. Special Order bullet moulds page
Description
40 Cal Cardboard Wads-.025 (1000)
45 Cal Cardboard Wads-.025 (1000)
40 Cal Vegetable Fiber Wads-.062 (1000)
RCBS Neck Expander Dies
The Neck Expander Die is designed to allow you
to seat lead bullets in your cases without shaving
or deforming. The Neck Expander opens a gentle
taper into the case neck insuring the bullet will not
change in diameter or weight. The neck expander
die body is universal, so purchase a complete
unit and then just add Neck Expander Plugs for
additional calibers. See Reference Section page 77.
Standard Pistol Bullet Moulds
82021
32-077-RN
82041
44-225-SWC #
82060
32-098-WC
82042
44-240-SWC #
82061
32-098-SWC
82043
44-245-SWC
82057
38-090-RN (380)
82080
44-250-K
9mm-115-RN
82079
44-300-SWC #
39803
.224
39821
.310
82026
39805
.228
39823
.311
82062
9mm-124-RN #
82052
45-185-SWC-BB
39807
.243
39825
.321
82063
9mm-124-RN-TG
82046
45-200-SWC
39809
.257
39827
.323
82027
9mm-124-CN
82047
45-201-SWC
39811
.264
39829
.338
82077
9mm-147-FN
82081
45-225-CAV
39813
.277
39830
.348
82031
38-148-WC
82048
45-230-RN
39815
.284
39831
.358
82032
38-150-SWC
82049
45-250-RN
39817
.308
39833
.375
82064
38-158-RN
82050
45-255-SWC
39819
.309
39835
.416
82065
38-158-SWC #
82092
45-270-SAA
82066
40-180-FN
82083
45-300-SWC #
82067
10mm-170-SWC
82094
476-400-SWC +
82068
10mm-200-SWC
82087
50-340-SWC +
82039
41-210 SWC
82099
500-400 SWC +
Part #
specify
Description
Neck Expander Die
RCBS Neck Expander Plugs
Part #
specify
Expands the neck and slightly flares the case mouth
of your bottle neck cases. .224” to .416” rifle caliber.
Order the neck expander rod as a replacement item. See
Reference Section page 77.
Description
Standard Pistol Bullet Mould
(+) Single cavity mould. (#) Gas Check. See Reference Section (page 81) for description.
Limited-Production Pistol Moulds
39851
.224
39869
.310
57902
25-050-RN
57945
40-180-FN
39853
.228
39871
.311
57906
30-085-RN
57917
40-185-SWC
39855
.243
39873
.321
57942
32-115-FN #
57915
40-180-RN (38-40)
39857
.257
39875
.323
57908
8mm Nambu 110 RN #
57919
45 Colt 250-RN +
39859
.264
39877
.338
57913
38-175-RN #
57947
455 Webley 265-RN HB +
39861
.277
39878
.348
57914
40-170-FN
39863
.284
39879
.358
39865
.308
39881
.375
Part #
specify
39867
.309
39883
.416
(+) Single cavity mould. (#) Gas Check. See Reference Section (page 84) for description.
Part #
specify
39801
Description
Limited Production Pistol Mould
RCBS Cowboy Action Shooting Moulds
Description
Neck Expander Plug
Neck Expander Plug Rod
California Prop. 65 Warning:
Melting lead and casting lead objects (with these products)
will expose you and others in the area to lead, which is known
to cause birth defects, other reproductive harm, and cancer.
32
HUNTINGTON DIE SPECIALTIES - 2014
Part #
82301
82302
82303
82304
82305
82306
82307
82308
82309
Description
.25-20 Win-85 gr
.30-30 Win-150 gr
.32 H&R Mag / 32-20 Win-90 gr CM
.38 Special / 357 Mag 140 gr CM
.38 Special/ 357 Mag 158 gr CM
.38-40 WCF-180 gr CM
.44-40WCF/.44Russ./.44Spcl/.44Mag.-200gr
45 S&W Sch. / 45 Long Colt-230 gr
.56-50 350 gr Spencer CM (+)
(+) Single Cavity moulds, See the Reference Section (page 83) for specific description.
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
Standard Round Ball Moulds
bullet moulds
Standard Rifle Moulds
82007
22-055-SP #
82070
40-300-SP-CSA
82015
243-095-SP #
82072
40-350-SP-CSA +
82016
257-120-SP #
82074
40-400-SP-CSA +
82017
270-150-SP #
82086
40-400-BPS +
82018
7mm-168-SP #
82073
40-420-BPS +
82009
30-115-SP #
82075
416-350-FN #+
82019
30-150-FN #
82036
44-200-FN
82020
30-180-SP #
82093
44-370-FN +
82014
30-180-FN #
82051
45-300-FN #
82022
7.62-130-SPL #
82045
45-325-FN-U
82023
310-120-RN Cadet
82053
45-405-FN #+
82024
32-170-FN #
82054
45-500-FN #+
82028
35-200-FN #
82085
45-500-BPS +
82029
37-250-FN #
82084
45-530-RN +
82090
378-312-BPS
Part #
specify
6.5-140-SIL #
82153
308-200-SIL #
82150
7mm-145-SIL #
82154
357-180-SIL #
82152
308-165-SIL #
82156
429-240-SIL #
(+) Single cavity mould. (#) Gas Check. See Reference Section (page 82) for description.
Limited-Production Rifle Moulds
57900
22-060-FN #
57917
40-185-SWC
57901
6mm/24-100-FN #
57916
41-260-FN
57903
25-100-FN #
57946
41-300-FN
57904
6.5mm/26-140-FN #
57918
43-370-FN
57941
27-130-FN #
57923
57909
8mm-170-FN #
57922
465-480-FN +
468-480-MH* +
57943
33-200-FN #
57924
470-500-FN +
57911
348-200-FN #
57949
475-445-FN #+
57944
35-250-SP #
57921
50-450-FN +
57914
40-170-FN
57948
50-515-FN +
57945
40-180-FN
Description
Limited Production Rifle Mould
(*) For Martini Henry. (+) Single cavity mould. (#) Gas Check.
See Reference Section (page 84) for description.
Limited-Production Paper Patch Rifle Moulds
40-400-PP +
45-500-PP +
Part #
specify
82140
.451-R
.457-R
82142
.490-R
Part #
Description
specify Standard Round Ball Mould
(+) Single Cavity moulds. See the Reference Section (page 83) for specific description.
Limited Production Round Ball Moulds
57928
.330”
330-R
57935
.464”
464-R +
57929
.350”
350-R
57936
.495”
495-R +
57930
.354”
354-R
57937
.520”
520-R +
57931
.375”
375-R
57938
.562”
560-R +
57932
.395”
395-R +
57939
.610”
610-R +
57940
.678”
678-R +
57933
.410”
410-R +
57934
.454”
454-R +
Description
Limited Production Round Ball Mould
Minie Ball Mould
Part #
specify
82103
58-500-M +
Description
Minie Ball Mould
(+) Single cavity mould. See the Reference Section (page 83) for specific description.
Description
RCBS Silhouette Rifle Mould
57926
82138
.440-R
82149
57925
.435-R
82135
(+) Single Cavity moulds. See the Reference Section (page 84) for specific description.
Silhouette Rifle Moulds
Part #
specify
82134
Part #
specify
Description
Standard Rifle Mould
(+) Single cavity mould. (#) Gas Check. See Reference Section (page 80) for description.
Part #
specify
bullet mouldS
57927
50-530-PP +
Description
Paper Patch Rifle Mould
(+) Single cavity mould. See the Reference Section (page 84) for specific description.
North-South Skirmish Bullet Moulds
82166
.500 Hodgdon+*
82161
.578-414 Hodgdon+
82170
.520 Hodgdon+*
82162
.580-416 Hodgdon+
82172
.540 Hodgdon+*
82164
.584-419 Hodgdon+
82160
.576-412 Hodgdon+
Part #
specify
Description
North-South Mould
(*) Adjustable moulds. (+) Single Cavity moulds
See the Reference Section (page 83) for specific description.
California Prop. 65 Warning:
Melting lead and casting lead objects (with these products)
will expose you and others in the area to lead, which is known
to cause birth defects, other reproductive harm, and cancer.
Custom Bullet Moulds
RCBS no longer produces unique, one-of-a-kind, custom
bullet moulds. RCBS still offers approximately 140 standard
and Limited Production / Special Order bullet moulds.
For more information, email [email protected] or call
1-800-533-5000.
Toll Free Order Line 1-866-735-6237
33
< TOC >
bullet LUBE EQUIPMENT
RCBS Top Punches
Bul l et lube equip me nt
The RCBS Top Punch will fit both RCBS and Lyman
equipment. These top punches are made from good steel
and they are heat treated to guard against wear. We list
the top punches that we carry in stock. Reference your
bullet to the appropriate Top Punch on pages 80-83.
RCBS Lube-A-Matic-2
This tool is designed to swage and lubricate bullets in
one smooth step. You insert the bullet into the sizing
die and pull the handle down. This drives the bullet
into the die to size it to the correct dimension without
shaving or shearing lead. As you raise the handle up,
the sized and lubricated bullet is then ejected from
the tool. You are able to regulate the bullet lubricant
to a precise amount that you want. This unit also has a
depth adjustment, which allows you to seat the bullet
into a sizing die only the distance that you want. The
frame of the tool also houses the lubricant reservoir.
This is all cast into one piece for maximum strength.
All bored surfaces have been drilled and reamed in
one operation to insure alignment. The Lube-Matic is
offered without sizer die or top punch.
Part #
80040
HUNTINGTON DIE SPECIALTIES - 2014
Description
Lube-A-Matic-2
to p pun c h es & lube size r die s
RCBS Lube Sizer Dies
These Dies are designed to size bullets with or without gas
checks to the precise diameters, without shaving lead. The
swaging action compresses the alloy to produce a perfect
diameter bullet for increased strength, smoothness, and
accuracy. Each Die is precision honed and hardened
to produce perfect tolerances and each comes with an
ejector pin. We carry many sizes in stock. These dies will
fit both RCBS and Lyman bullet lubing tools. See RCBS
Reference Lube Sizer Dies on pages 80-83.
82504
#115
85506
#506
85595
#595
82506
#190
85509
#509
85600
#600
85520
#265
85515
#515
85607
#607
82513
#311
85518
#518
85608
#608
82519
#374
85520
#520
85609
#609
82520
#378
85529
#529
85611
#611
85583
#383
85531
#531
85620
#620
82521
#401
85535
#535
85621
#621
82522
#402
85541
#541
85624
#624
82541
#420
85546
#546
85630
#630
82527
#421
85550
#550
85631
#631
82526
#422
85552
#552
85632
#632
82528
#424
85554
#554
85633
#633
82529
#429
85556
#556
85635
#635
82530
#430
85558
#558
85636
#636
82542
#444
85562
#562
85637
#637
82543
#445
85565
#565
85638
#638
82534
#460
85570
#570
82545
#680
82536
#465
85585
#585
85639
#639
Part#
specify
Description
RCBS Standard Top Punch
Limited Production Top Punches
Standard Lube Sizer Dies
251
470/500
516
560
311
495
520
575
82200
.224
82212
.309
82224
.375
82230
.431
465
505
525
580
82240
.225
82213
.310
82225
.376
82253
.446
465/480
510
546
615
82201
.243
82214
.311
82252
.378
82231
.450
558
622
585
82202
.244
82242
.312
82243
.400
82232
.451
82203
.257
82215
.313
82245
.401
82233
.452
82204
.258
82216
.314
82249
.408
82234
.454
82207
.265
82217
.321
82226
.410
82235
.457
82205
.277
82219
.354
82246
.417
82236
.458
82206
.278
82220
.355
82227
.427
82237
.476
82208
.284
82221
.356
82244
.428
82250
.501
82209
.285
82222
.357
82228
.429
82254
.500
82211
.308
82223
.358
82229
.430
82255
.512
Part #
specify
Part #
57196
57197
34
Description
Limited Production Top Punch- (specify)
See the Reference Section (page 84) for specific description.
Gator 50 Caliber Rifle Gas Checks
Part #
BSS1
Description
50 Caliber Gas Checks (1000 pack) Hornady Gas Checks
We consider the Hornady Gas Checks to be the best
gas check design in the field. These Gas Checks are
made from copper and hold better than the Lyman-type
gas checks. Sold 1000 per box.
Description
RCBS Standard Lube Sizer Die
Limited Production Lube Sizer Dies
Part #
57198
0.228
0.251
0.264
7010
22 cal.
7070
30 cal.
7125
416 cal.
0.323
0.338
0.349
7020
6mm
7080
32 cal./8mm
7130
44 cal.
0.406
0.439
0.455
7030
25 cal.
7090
338 cal.
7140
45 cal.
0.468
0.474
0.512
7040
6.5mm
7100
348 cal.
7145
475 cal.
7150
50 cal. Pistol
Description
Limited Production Lube Sizer Die- (specify)
S.O. Lube Sizer Die up to .520”- (specify)
7050
270 cal.
7110
35 cal.
7060
7mm cal.
7120
375 cal.
Part#
specify
Description
Hornady Gas Checks (1000)
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
r c bs d ies - g roup a-e
RCBS Reloading Dies are the best in the world and
the standard for the industry. The following is a list of
standard dies that are carried by RCBS in stock and are
in our stock at all times. To find your dies, see Reference
Section on pages 72-79.
“Group A” Rifle Reloading Dies– 2 Die Set
Part #
17201
16201
10301
10201
10601
10001
10701
10801
10901
11001
11101
10501
33201
11601
11401
22601
11501
12401
12001
11801
12101
12201
12501
12601
12801
12701
13201
13301
13401
13501
31301
14001
14101
13601
31401
31101
26601
17801
34201
13701
13901
13801
34001
34801
33501
29001
35001
14301
14401
25201
25001
14601
14701
26901
Caliber
17 Remington
17 Rem Fireball
204 Ruger
22 Hornet
22-250 (.22 Var.)
218 Bee
220 Swift
221 Rem. Fireball
222 Remington
222 Remington Mag
223 Remington (5.56mm)
223 WSSM
240 Weatherby Mag
243 WSSM
243 Winchester
6mm PPC
6mm Remington (.244”)
25 WSSM
25-06
25-20 Winchester
25-35 Winchester
250 Savage (.250-3000)
257 Roberts
257 Weatherby Mag
260 Remington
264 Winchester Mag
6.5x55 Swedish Mauser
6.8x43 Rem SPC
270 Weatherby Mag
270 Winchester
270 Win. Short Mag
280 Remington
284 Winchester
7mm Remington Mag
7mm Win. Short Mag
7mm Rem. SAUM
7mm STW
7mm Remington Ultra Mag
7mm T/CU
7mm Weatherby Mag
7mm-08
7x57 Mauser / 275 Rigby
7x64 Brenneke
7mm-30 Waters
7.5 Schmidt-Rubin
7.62x54R Russian
7.62x39 (.308” / .311”)
7.65x53 Belgium Mauser
7.7x58 Japanese Arisaka
30 T/C
30 Luger (7.65mm)
30-30 WCF
30-40 Krag
300 RCM
reloading dieS
group a dies continued
14801
29501
15101
15201
15301
17601
30801
31201
15401
15501
14901
16001
15901
15701
31601
27301
17301
16601
16301
17701
25401
16801
30601
32701
16501
30701
23101
34501
16901
30901
26801
Part #
specify
30-06 Springfield
30-378 Weatherby
300 Savage
300 Weatherby Mag
300 Winchester Mag
300 Remington Ultra Mag
300 Winchester Short Mag
300 Rem. SAUM
303 British
308 Win. / 307 Win.
308 Marlin Express
8mm Remington Mag
8x57 Mauser (8mm MSR)
32 Winchester Special
325 WSM
338 RCM
338 Federal
338 Lapua
338 Winchester Mag
338 Remington Ultra Mag
338 Marlin Exp
338-378 Weatherby Mag
340 Weatherby Mag
358 Winchester / 356
35 Remington
35 Whelen
357 Sig
9.3x62 Mauser
375 H&H Mag
375 Remington Ultra Mag
375 Ruger
Description
Group A Rifle Reloading Die Set
See the Reference Section (page 74-75) for specific description.
“Group B” Steel Sizer Pistol Dies / RC –3 Die Set
Part #
18608
18805
18806
19108
35208
23808
Part #
specify
Caliber
44 Mag / 44 Special
44-40 WCF (for lead bullet)*
44-40 WCF (for jacketed bullet)*
45 Colt
480 Ruger / 475 Linebaugh
500 S&W
Description
Group B Steel Sizer Pistol Dies / RC
See the Reference Section (page 75) for specific description.
“Group B” Carbide Pistol Dies / Roll Crimp – 3 Die Set
Part #
18212
18512
18612
19112
23212
24212
35212
23812
Part #
specify
Caliber
357 Mag / 38 Special / 357 Max
41 Mag
44 Mag / 44 Special
45 Colt
454 Casull
460 S&W
480 Ruger / 475 Linebaugh 1.400”
500 S&W / 500 S&W Spl
Description
Group B Carbide Pistol Dies / Roll Crimp
See the Reference Section (page 75) for specific description.
group a dies continued
Toll Free Order Line 1-866-735-6237
35
< TOC >
reloading dieS
r c bs d ies - g roup a-e
“Group B” Steel Sizer Pistol Dies / taper crimp – 3 Die Set
Part #
22210
Part #
specify
Caliber
50 Action Express
Description
Group B Pistol Dies / Taper Crimp
See the Reference Section (page 75) for specific description.
“Group B” Carbide Pistol Dies / taper crimp– 3 Die Set
Part #
20015
18215
20515
20415
22115
18915
Part #
specify
Caliber
32 ACP (.311” bullets)
357 Mag / 38 Spl / 357 Max
9mm Luger, 9x21, 9x23 Win.,
9x18 Ultra, 356 TSW
380 Auto
40 S&W / 10mm
45 ACP, 45 AR, 45 GAP
Description
Group B Carbide Pistol Dies / TC
See the Reference Section (page 75) for specific description.
“Group C” Steel Sizer Dies – 3 Die Set
Part #
18010
20604
20704
20904
20804
35504
24104
Part #
specify
Caliber
30 M1 Carbine (taper crimp)
375 Win.
444 Marlin
45-70 US Govt.
458 Win.
450 Marlin
458 Lott
Description
Group C Steel Sizer Die Set
“Group C” Carbide Sizer Dies – 3 Die Set
Part #
18015
Part #
specify
Caliber
30 Carbine
Description
Group C Carbide Die Set
See the Reference Section (page 75) for specific description.
“Group D” Dies – 2 Die Set
Part #
21801
26201
10401
33801
26301
11701
28901
32201
26501
16401
32901
33401
27801
27701
12901
32801
27901
28701
17001
36
Caliber
17 Hornet (Hornady)
22 K-Hornet
22 Remington Jet
22 Savage High-Power
5.6x50R
5.7x28 (FN)
6x45-AR
257 Roberts Imp. 40°
26 Nosler NEW
264 LBC-AR *
6.5 Creedmoor
6.5 Rem. Mag
6.5-06
6.5x54 M-S
6.5x47 Lapua
6.5x57 Mauser & 6.5x57R
6.5x68 S
6.5-284 Win. (or Norma)
280 Ackley Imp. (Nosler)
7x65 R
7mm Rem. BR
7.5x54 French MAS
30 Remington AR
30 Mauser (7.63mm)
30 Remington
300 H&H Mag
300 AAC Blackout
30-338 Win. Mag
308 Norma Mag
32-40 Win.
8mm-06
8x68 S Mag
338 Norma
338-06 / 338-06 A-Square
348 Win.
350 Rem. Mag
9.3x74R
9.3x66 / 370 SAKO Mag
376 Steyr
378 Weatherby Mag
400 CorBon
416 Ruger
416 Rem. Mag
416 Rigby
460 Weatherby Mag
Part #
Description
specify Group D Die Set
* Dies not compatible with 6.5mm Grendel (6.5×38). Reference (page 76).
“Group E” Steel Sizer Dies – 3 Die Set
Part #
18105
35605
Part #
specify
See the Reference Section (page 75) for specific description.
HUNTINGTON DIE SPECIALTIES - 2014
26701
34101
29101
25301
25101
29201
15001
22401
29401
15601
32501
32601
34401
13001
16701
33601
33701
34601
14201
17901
33001
17501
13101
22701
22801
33101
Caliber
32-20 WCF
38-40 WCF *
Description
Group E Steel Sizer Die Set
* For use with lead bullets only. See the Reference (page 76) for specific description.
“Group E” Carbide Dies / Taper Crimp – 3 Die Set
Part #
21015
23015
20215
21415
21412
Part #
specify
Caliber
25 ACP
9mm Makarov
38 ACP / 38 Colt Super Auto
32 S&W Long / 32 H&R Mag
327 Fed / 32 S&W L
32 H&R Mag (Roll Crimp)
Description
Group E Carbide TC Die Set
See the Reference Section (page 76) for specific description.
Die Maintenance Kit
Keep your reloading gear in pristine
condition with our Die Maintenance Kit.
Outfitted with the necessary chemicals
and brushes to clean reloading dies,
this kit is perfect for removing dirt, oil
and other debris from every nook and
cranny. They also come equipped with
special chemicals and oils designed
for safe, long-term storage of your
reloading equipment.
Part #
99972 Description
Die Maintenance Kit
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
reloading dieS
r c bs d ie s - safari se rie s
AR Series Dies
Safari Dies
Straight out of the RCBS Special Order and listed
at a reduced price. The Safari Series represents
cartridges typically used for dangerous game in
Africa. These featured calibers were chosen based
on production rifles from CZ, Ruger and others that
offer these timeless African hunting classics. See
Reference Section on page 79. The .500 Jeffery
and .505 Gibbs are made on 1” die bodies and
require a press adapter bushing (not included*).
“Safari Series” Dies – Full Length Die Set
Part #
24301
24401
23001
24601
Caliber
404 Jeffery
450x400 Express 3” (400 Jeffery)
450 Rigby Rimless
470 Nitro Express 3-1/4”
Part # Description
specify Safari Series Full Length Set
See the Reference Section (page 79) for specific description.
“Safari Series” Dies / Roll Crimp- Three Die Set
Part #
24804
24704
24904
Part # 57191
57191
Caliber
.500 Nitro Express 3”
.500 Jeffery 1” Die Body *
.505 Gibbs 1” Die Body *
* Requires a 1” press adapter bushing (not included).
Description
1-1/4”-12 Press Adapter Bushing- Rock Chucker
1-1/2”-12 Press Adapter Bushing- AmmoMaster-2
Rock Chucker / RC Supreme / AmmoMaster-1: 1-1/4”-12 to 1”-14.
Ammomaster-2 Press: 1-1/2”-12 to 1”-14.
rc bs d ies - le g acy series
Legacy Series Dies
“Legacy Series” Dies – Three Die Set
Part #
specify
Features & Benefits
• Designed for AR-style and semi-auto rifles
• Distinctive black RCBS die box
• Small Base sizing
• Taper Crimp bullet seating**
• RCBS Limited Lifetime Warranty
Part #
10307
11107
11407
28907
32907
12807
16407
13307
35007
22407
25307
15507
14807
17307
Part # specify
Caliber
204 Ruger
223 Rem. (5.56x45)
243 Winchester
6x45
6.5 Creedmoor
260 Remington
264 LBC-AR *
6.8x43 Rem. SPC
7.62x39
300 AAC Blackout
30 Rem AR
308 Winchester
30-06 Springfield
338 Federal
Description
AR Series Die Set
* Dies not compatible with 6.5mm Grendel (6.5×38). **Canelured bullets
The Taper Crimp Seater is more forgiving when various case lengths are
loaded at the same time. Case neck crimp bulges and buckled shoulders
are virtually eliminated when Taper crimping is used with cannelured
bullets.
Caliber
.38-55 Win. / 38-55 Ballard
.405 Win.
.40-60 Win. (.408” bore)
.40-65 Shiloh-Sharps (.408 bore)
.40-70 2-1/2” SS
.45-60 Win.
.45-75 Win.
.45-90 2.4 Win.
.45-100 2.6 SS
.45-100 2-7/8” SS
.45-120 3-1/4” SS
.50-70 Govt
.50-90 2-1/2 SS
.50-95 Win. Express
.56-50 Spencer
Description
Legacy Die Set
The new RCBS AR Series is a must for the
progressive reloader. It features a Small Base
sizing die and a 7° Taper Crimp seating die for
use with canelured bullets. This combination
makes reloading easier for AR-style or semiauto shooters. See Reference Section on page
78. The Small Base sizer reduces the cartridge
to minimum dimensions, guarantees that the
cartridge will rechamber. For Small-base sizer
dies, see page 43.
AR Series Seater Dies
The Legacy series of dies supports these
legendary metallic black powder cartridges
and the enthusiasts that are shooting original or
reproduction black powder rifles. See Reference
Section on page 78.
Part #
36504
23608
19004
23304
19204
19804
19904
19304
19404
19504
19604
36804
19704
21304
20104
rcb s di e s - AR se ri e s
Part #
10362
11162
28962
11462
16462
32962
12862
13362
35062
22462
15562
25362
14862
17362
Part # specify
Caliber
204 Ruger
223 Rem. (5.56x45)
6x45
243 Win.
264 LBC-AR *
6.5 Creedmoor
260 Rem.
6.8x43 Rem. SPC
7.62x39
300 AAC Blackout
308 Win.
30 Rem AR
30-06 Springfield
338 Federal
Description
AR Series Seater Die
* Dies not compatible with 6.5mm Grendel (6.5×38).
See the Reference Section (page 78) for specific description.
Toll Free Order Line 1-866-735-6237
37
< TOC >
reloading dieS
c owboy action dies
Cowboy Action Shooting Dies
Cowboy Action Shooting (CAS) is just
about the fastest growing shooting sport
around. Not only are the usual competition
traits of speed and accuracy required,
but the shooter must recreate the spirit of
the 1880’s. Guns, ammo, and costumes
must fit the period. Jacketed bullets are
not permitted by the Cowboy Action Shooting rules. Making ammo that
fits the Old west image means loading lead bullets. It also means that
the bullets must be designed to work properly in lever-action rifles and
single-action revolvers. Loading dies must be optimized for lead bullets.
That’s where the new RCBS CAS dies and bullet moulds come in. CAS
dies are built to slightly different dimensions than our regular dies. They
allow optimum sizing, expanding, seating and crimping needed to load
great lead-bullet ammo. See Reference Section on pages 78.
Three Die Sets
In keeping with the spirit of the game, CAS dies even look different. Instead
of the satin steel finish, CAS dies get an induction heat treatment that
imparts a “Case-hardened” look. Handsome brass lock rings complete
the picture, and even the packaging reflects the CAS theme. New CAS
moulds produce bullets that are profiled to give smooth feeding. They
follow the designs from a century ago. Beveled crimping grooves set the
proper cartridge length, and generous lube grooves hold enough lubricant
even for black powder loads.
Cowboy Shotshell Die Set 12 Gauge
Finally RCBS introduced the 12 Gauge Shotshell Die Set. It’s functional and
inexpensive and works with brass cases. This set is designed to be used
in any RCBS single-stage press with a removable die bushing (1-1/4”-12)
and performs like rifle dies. It has everything to resize and deprime. Use
your shotshell press to fill the case with powder, seat the wad and spacers
and dispense your shot charge. You then remove the sizing ring from your
RCBS Shotshell Die and install the finish crimp. The last operation is to
place your overshot card on top of the shot
charge and run the case into the die to roll
crimp the case mouth. It’s both inexpensive
and effective. The twelve gauge shell holder
is included. The die comes with the RCBS
lifetime warranty. Alloy die body.
Part #
99060
99061
Part #
specify
Caliber
.25-20 WCF
.30-30 WCF
.32 Winchester Special
.32-40 WCF
for Loading Blanks
Some shooters have a need for dies to load
blanks and Hornady engineers devised a set
of dies that allow the loading of blanks for all
popular Cowboy Action cartridges, for 32-20
through 45-70 Gov. These dies are compatible
with all 7/8”-14 thread reloading presses.
Part #
Description
544591 Hornady Blank Cartridge Dies .22 - .45
The RCBS Large Caliber dies are made in 1-1/2” thread diameter. These
dies are manufactured to RCBS’ usual high standards. The dies will work
in the RCBS AmmoMaster-2, Hollywood and the Rock Crusher Presses.
Please specify the type of press you intend to use or the diameter of
the threads. The Corbon H-type presses also work with the RCBS Large
Caliber dies. Die parts on page 43. See Reference Section on pages 76.
See the Reference Section (page 78) for specific description.
Cowboy - Roll Crimp - Three Die Set
Part #
specify
Caliber
.32-20 WCF
.38 S&W
.38-40 WCF
.38-55 WCF
.40-65 WCF (.410)
.44-40 WCF
.45-70 U.S. Gov
Description
CAS Three Die Set-Roll Crimp
See the Reference Section (page 78) for specific description.
Cowboy Carbide – Roll Crimp - Three Die Set
Part #
21451
18251
18651
19151
Part #
specify
Caliber
.32 S&W Long / .32 S&W
.357 Mag / .38 Special
.44 S&W Russian / .44 Special
.45 S&W Schofield / .45 Long Colt
Description
CAS Three Die Set-Carb Roll Crimp
See the Reference Section (page 78) for specific description.
38
larg e cali b e r di e s
RCBS 1-1/2”-12 Large Caliber Dies – Two Die Set
Description
CAS Three Die Set
Part #
18151
20351
35651
36551
36651
18851
20951
Description
Cowboy Shotshell Die
Cowboy Shell Holder, 12 gauge Hornady Die Set
Cowboy – Roll Crimp - Three Die Set
Part #
11850
14650
15750
32550
HUNTINGTON DIE SPECIALTIES - 2014
Part #
30001
30030
30065
.50 BMG Dies
Full Length Die Set, 1-1/2”-12
Neck Sizer Die, 1-1/2”-12
Trim Die, 1-1/2”-12
Part #
88746
9446
9448
88772
9560
9602
90352
9629
9562
9561
.50 BMG Accessories
Shell Holder, .50 bmg
Bullet puller body, 1-1/2”-12 (pg 18)
Bullet puller collet, .50 bmg (pg 18)
Ram Priming Unit w/shell holder (pg 11)
Priming Bench Tool (pg 11)
primer pocket
50 BMG Decap Pins (2)
uniformer
50 Cal Case Trimmer - Big Bore (pg 23)
1-1/2”-12 Lock Ring
Military Crimp Remover (pg 12)
Primer Pocket Uniformer Carbide (pg 12)
Part #
14501
14530
9447
.416 Barrett Dies
Full Length Die Set, 1-1/2”-12 Neck Sizer Die, 1-1/2”-12 Bullet puller collet, .416 Barrett (pg 18)
Part #
27501
27530
.460 Steyr Dies
Full Length Die Set, 1-1/2”-12 Neck Sizer Die, 1-1/2”-12 Toll Free Order Line 1-866-735-6237
military crimp
remover
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
r cbs d ies - comp e tition se rie s
RCBS Competition Rifle Die Sets – Two Die Set
All Competition Dies are manufactured with very precise dimensions for minimum tolerance. The interior
polish of these dies helps the brass work smoothly with little friction. The die body is made of hardened steel with an external oxide finish, which does
not chip or peel with age as plating does. The die
is machined to close tolerances to yield maximum
concentricity between the neck and the body of the
die. The sizing dies are vented to avoid case damage
caused by trapped air. They have absolutely minimum headspace tolerances and provide minimum
sizing on case length. The standard assemblies for
the sizer have an expander ball in the middle of the
rod, which assists in easier operation when extracting the case from the
die (exception: 204 & 25 cal.). See Reference Section on page 78.
The bullet seating die is made with a unique alignment device built into
it, aligning the bullet with the case mouth the instant before seating. In
addition it is fitted with a micrometer head to allow setting adjustments
of the bullet seating depth in increments of .001”. The seating die also
features the loading window with a sliding guide to provide the correct
bullet alignment before and after seating. The shorter calibers have
extended lock rings with socket head screws. The die sets include a
Lock Ring Wrench and extra Decap Pins. Extended head furnished when
needed. These dies are available in the calibers listed. To order just a
sizing die, see RCBS reference section page 78.
39401
38301
37001
37201
37101
37301
39501
38401
37501
37401
37601
38501
38601
37701
37801
38701
204 Ruger +
22 Hornet +
222 Remington +
223 Remington +
22-250 +
243 Winchester +
25-06
6.5x55 Swedish Mauser +
270 Winchester
7mm-08 Remington +
7mm Rem Mag
7x64 Brenneke
7.5x55 Schmidt-Rubin
30-06 Springfield
308 Winchester +
8x57 Mauser
RCBS Competition Seater Dies
The Competition Seating Die can be used for other calibers than those
listed below. We also offer special sleeve and seating plugs in calibers
such as .17, .25, .338, .375, etc. Please contact us for further information
on these dies. In the reference section, you will find a listing of the various
parts available for the competition dies (page 78). The Competition Seating Die Body is universal, therefore by changing sleeves, seating plugs,
and sometimes shell holder extensions, it is possible to use a Competition Seating Die with many of your standard dies sets. Extended shell
holder furnished when needed (+). See Reference Section on page 78.
Part #
39438
38338
37038
37238
37138
37338
39538
38438
37538
37438
37638
38538
38638
37738
37838
38738
Caliber
204 Ruger +
22 Hornet +
222 Remington +
223 Remington +
22-250 +
243 Winchester +
25-06
6.5x55 Swedish Mauser +
270 Winchester
7mm-08 Remington +
7mm-Rem. Mag
7x64 Brenneke
7.5 Schmidt-Rubin
30-06 Springfield
308 Winchester +
8x57 Mauser
RCBS Competition Seater Plugs
Part #
38150
38151
38152
38153
38154
38155
38156
38157
38159
Caliber
20 cailber
22 caliber
243 caliber / 6mm
25 caliber
6.5mm
270 caliber
7mm
30 caliber / 7.5mm
8mm
RCBS Competition Bullet Guides
Part #
Description
specify Competition Die Set
+ Extended shell holder included
RCBS Competition Extended Shell Holders
Part #
38252
38253
38260
38262
38279
38280
reloading dieS
Description
#2 Competition Extended Shell Holder
#3 Competition Extended Shell Holder
#10 Competition Extended Shell Holder
#12 Competition Extended Shell Holder
#38 Competition Extended Shell Holder
#43 Competition Extended Shell Holder
Part #
38201
38202
38205
38206
38207
38208
38209
38212
38214
Caliber
20 caliber
22 caliber
243 caliber / 6mm
25 caliber
6.5mm
270 caliber
7mm
30 caliber / 7.5mm
8mm
Competition Dies - Special Order
Competition Extended Shell Holders - Special Order
These special order extended shell holders are designed to exclusively
for use with RCBS Competition-Series seating dies. (see page 39, 77, 78.)
#1
#4
#6
#7
#9
#11 #13 #16 #17
#18 #19 #21 #23 #24 #25 #26 #27 #28
#30 #32 #34 7x66 V-H
9.3x64 Bren.
Part # Description
57173 S.O. Competition Extended Shell Holder - (specify)
(*) Special Order are non-cancellable and non-refundable. 90 to 120 days from RCBS.
.17
.318 .32
.338 .35
.375 9.3mm
Part # Description
57165 S.O. Competition Seater Die Complete (specify)
57162 S.O. Competition Seater Plug - (specify)
57163 S.O. Competition Bullet Guide - (specify)
(*) Special Order are non-cancellable and non-refundable. 90 to 120 days from RCBS.
Toll Free Order Line 1-866-735-6237
39
< TOC >
reloading dieS
RCBS x die s
RCBS X DIE
This is a single die that eliminates the need to trim.
RCBS X Die limits the growth of overall length of
your cases. This is a real plus to the reloader with
progressive machines. It is a full-length sizing die
and more. Just size your cases and trim them all to
the same length. From that point on, your cases will
stop “growing.”
If you are just starting to reload any of the calibers listed, order the X-Full
Length Die Set containing the X-Sizer Die and Standard Seater Die. If you
already own a standard set of dies for the chosen cartridge, order only the
X-Die Full Length Sizer Die only.
Due to variability in neck brass thickness, RCBS standard dies size
the neck below your desired diameter and then pull an expander ball
through to get the proper bullet tension. The X Die sizing die features
a self-centering, changeable neck bushing that allows you to precisely
set the amount of tension on the bullet. This reduces work hardening of
the case neck brass, prolonging case life and increasing accuracy. Neck
bushings are available in .001” increments from .189” to .365”.
Neck bushings are not included with these dies and must be ordered
separately. Proper neck bushing size can be determined two ways.
Measure the outside neck diameter of your loaded cartridge, subtract
.002” to .003”. This allows approximately .001” of brass to spring back
for correct neck tension. The other is to measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet* and
subtract .001”. RCBS suggests that you have neck bushings one to two
sizes above and below your target diameter. *Measure your bullets as
advertised vs. actual diameter can vary between manufacturer.
Neck bushings are not included with these dies and
must be ordered separately. For a list of available neck
bushings see Reference section, page 78-79.
“X DIE” Rifle Reloading Die Sets
Part #
10312
38312
37112
38812
37012
37212
38862
10512
37312
11612
12412
38962
39012
38412
37512
31312
39062
31112
37612
17812
39112
31412
37412
37712
39162
37912
HUNTINGTON DIE SPECIALTIES - 2014
X die sets continued
Caliber
204 Ruger
22 Hornet
22-250
220 Swift
222 Remington
223 Remington
223 Rem. Small Base*
223 WSSM
243 Win.
243 WSSM
25 WSSM
25-06
260 Remington
6.5x55 Swedish Mauser
270 Winchester
270 Win. Short Mag
280 Remington
7mm Rem. SAUM
7mm Rem. Mag
7mm RUM
7mm STW
7mm Win. Short Mag
7mm-08
30-06 Springfield
30-06 Small Base*
30-30 WCF
31212
17612
39212
38912
30812
39362
37812
39262
38712
31612
17712
39312
30912
Part #
specify
300 Rem. SAUM
300 RUM
300 Weatherby Mag
300 Win. Mag
300 WSM
303 British
308 Winchester
308 Win. Small Base*
8x57 Mauser
325 WSM
338 RUM
338 Win Mag
375 RUM
Description
X DIE Rifle Reloading Die Set
See the Reference Section (page 78-79) for specific description.
“X DIE” Sizer Die
Part #
10309
38309
37009
38809
37209
37109
38859
10509
37309
11609
12409
38959
39009
38409
37509
31309
39059
31109
37609
17809
39109
31409
37409
37709
39159
37909
31209
17609
39209
38909
30809
39359
37809
39259
38709
31609
17709
39309
30909
Part #
specify
Caliber
204 Ruger
22 Hornet
22-250
220 Swift
222 Remington
223 Remington
223 Rem. Small Base*
223 WSSM
243 Winchester
243 WSSM
25 WSSM
25-06
260 Remington
6.5x55 Swedish Mauser
270 Winchester
270 Win. Short Mag
280 Remington
7mm Rem. SAUM
7mm Remi. Mag
7mm RUM
7mm STW
7mm Win. Short Mag
7mm-08
30-06 Springfield
30-06 Small Base*
30-30 WCF
300 Remington SAUM
300 RUM
300 Weatherby Mag
300 Win. Mag
300 Win. Short Mag
303 British
308 Winchester
308 Win. Small Base*
8x57 Mauser
325 WSM
338 RUlM
338 Win. Mag
375 RUM
Description
X DIE Rifle Sizer Die
See the Reference Section (page 78-79) for specific description.
X die sets continued
40
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
rc bs d ies - ne ck die sets
Price “Group 1” 2 Die Neck Sizer Set
Part #
17202
16202
10302
10002
10202
10602
10702
10802
10902
11002
11102
10502
33202
11402
11602
22602
11502
12402
11802
12102
12002
13202
12802
13502
13902
13602
26602
17802
34202
13702
14102
13802
33502
14302
14402
14802
25002
26902
17602
15202
15302
15502
15402
16002
31602
17302
27302
15902
16602
16302
16802
29502
30602
34502
26802
Caliber
17 Remington
17 Rem. Fireball
204 Ruger
218 Bee
22 Hornet
22-250
220 Swift
221 Rem. Fireball
222 Remington
222 Rem. Mag
223 Remington
223 WSSM
240 Weatherby Mag
243 Winchester
243 WSSM
6mm PPC
6mm Remington (.244 Rem)
25 WSSM
25-20 Winchester
25-35 Winchester
25-06
6.5x55 Swedish Mauser
260 Remington
270 Winchester
7mm-08 Rem
7mm Rem. Mag
7mm STW
7mm RUM
7mm T/CU
7mm Weatherby
284 Winchester
7x57 Mauser (7mm) / 275 Rigby
7.5 Schmidt-Rubin (1911)
7.65x53 Belgium Mauser
7.7x58 Japanese Arisaka
30-06 Springfield
30 Luger (7.65mm)
300 Remington
300 RUM
300 Weatherby
300 Win. Mag
308 Win. / 307 Win.
303 British
8mm Rem. Mag
325 WSM
338 Federal
338 RCM
8x57 Mauser (8mm)
338 Lapua
338 Win Mag.
338-378 Weatherby Mag
30-378 Weatherby
340 Weatherby Mag
9.3x62 Mauser
375 Ruger
May not be in stock, allow 30-45 days for delivery.
Price “Group 2” 2 Die Neck Sizer Set
Part #
12502
12602
12702
31302
13402
14002
31102
31402
Caliber
257 Roberts
257 Weatherby Mag
264 Win. Mag
270 Win. Short Mag
270 Weatherby Mag
280 Remington
7mm Rem. SAUM
7mm Winchester Short Mag
neck die setS
34002
34802
29002
14602
31202
30802
17702
16902
30902
7x64 Brenneke
7mm-30 Waters
7.62x54R Russian
30-30 WCF
300 Rem. SAUM
300 Winchester Short Mag
338 RUM
375 H&H Mag
375 RUM
May not be in stock, allow 45-60 days for delivery.
Price “Group 3” 2 Die Neck Sizer Set
Part #
26202
10402
33802
26302
32202
27802
12902
27702
32802
27902
26702
34102
29102
29202
25102
29402
15602
15002
32502
17902
32602
34402
16702
33702
34602
17902
33002
22702
22802
33102
Part #
specify
Caliber
22 K Hornet *
22 Rem. Jet *
22 Savage High-Power *
5.6x50 R *
257 Roberts Improved *
6.5-06 *
6.5x47 Lapua
6.5x54 MS *
6.5x57 *
6.5x68 S*
7x65 R *
7mm Rem. BR *
7.5x54 French MAS *
30 Remington *
30 Mauser (7.63mm)
30-338 Win. Mag *
308 Norma Mag *
300 H&H Magnum *
32-40 Winchester *
376 Steyr *
8mm-06 *
8x68S Mag *
338-06* / 338 A-Square
350 Rem. Mag *
9.3x74 R*
376 Steyr
378 Weatherby Mag *
416 Rem. Mag *
416 Rigby*
460 Weatherby Mag *
Description
Price Group 3 Neck Die Set
May not be in stock, allow 45-60 days for delivery.
RCBS makes Neck Sizers in any caliber. If you did not find the caliber you are looking for in
the list, please call us for a price quote. * Allow 90-120 weeks for delivery.
rcb s di e s - ne ck si z e r di e s
Price “Group 1” Neck Sizer Dies
Part #
17230
16230
10330
10230
10630
10730
10830
10930
11030
11130
10530
33230
11430
11630
22630
Caliber
17 Rem
17 Rem. Fireball
204 Ruger
22 Hornet
22-250 (.22 var)
220 Swift
221 Rem. Fireball
222 Remington
222 Rem. Mag
223 Remington (5.56mm)
223 WSSM
240 Weatherby Mag
243 Winchester
243 WSSM
6mm PPC
group 2 neck die sets continued
Toll Free Order Line 1-866-735-6237
group 1 neck sizer dies continued
41
< TOC >
neck die setS
rc bs d ies - ne ck sizer dies
group 1 neck sizer dies continued
11530
12430
12030
11830
12130
13230
12830
13530
17830
13630
26630
34230
13730
13830
13930
14130
33530
14330
14430
25230
25030
26930
14830
17630
15230
15330
29530
15530
15430
15930
16030
31630
27330
17330
16330
16630
25430
16830
30630
34530
26830
6mm Remington
25 WSSM
25-06
25-20 Winchester
25-35 Winchester
6.5x55
260 Remington
270 Winchester
7mm RUM
7mm Rem. Mag
7mm STW
7mm T/CU
7mm Weatherby Mag
7x57 Mauser / 275 Rigby
7mm-08
284 Winchester
7.5 Schmidt-Rubin (1911)
7.65x53 Belgium Mauser
7.7x58 Japanese Arisaka
30 T/C
30 Luger (7.65mm)
300 RCM
30-06 Springfield
300 Rem. Ultra Mag
300 Weatherby
300 Win. Mag
30-378 Weatherby
308 Win / 307 Win
303 British
8x57 Mauser
8mm Rem. Mag
325 WSM
338 RCM
338 Federal
338 Win. Mag
338 Lapua
338 Marlin
338-378 Weatherby Mag
340 Weatherby Mag
9.3x62
375 Ruger
Price “Group 2” Neck Sizer Dies
Part #
10030
12530
12630
12730
13430
31330
14030
31130
31430
34030
34830
29030
14630
31230
30830
17730
16930
30930
Caliber
218 Bee
257 Roberts
257 Weatherby Mag
264 Win. Mag
270 Weatherby Mag
270 Win. Short Mag
280 Rem.
7mm Rem. SAUM
7mm Win. Short Mag
7x64 Brenneke
7mm-30 Waters
7.62x54R Russian
30-30 WCF
300 Rem. SAUM
300 Win. Short Mag
338 RUM
375 H&H Mag
375 RUM
Price “Group 3” Neck Sizer Dies
Part #
21830
26230
10430
33830
26330
28930
16430
32230
27830
12930
27730
32830
27930
32930
17030
34130
26730
29130
25130
29230
29430
15630
15030
22430
32530
13030
17930
32630
34430
16730
33730
34630
33030
22730
22830
13130
33130
Caliber
17 Hornet (Hornady)
22 K Hornet*
22 Remington Jet*
22 Savage High-Power*
5.6x50*
6x45-AR
264 LBC-AR**
257 Roberts Improved*
6.5-06*
6.5x47 Lapua
6.5x54 MS*
6.5x57 Mauser*
6.5x68S*
6.5 Creedmoor
280 Ackley Improved
7mm Remington BR*
7x65 R*
7.5x54 French MAS*
30 Mauser* (7.63mm)
30 Rem
30-338 Winchester Mag*
308 Norma Mag*
300 H&H Mag*
300 AAC Blackout
32-40 Winchester*
338 Norma Mag
376 Steyr*
8mm-06*
8x68S Magnum*
338-06*
350 Remington Mag*
9.3x74 R*
378 Weatherby Mag*
416 Remington Mag*
416 Rigby*
416 Ruger
460 Weatherby Mag*
Part #
Description
specify Price Group 3 Neck Sizer Die
NOTE: RCBS makes Neck Sizers in all calibers. If you did not find the caliber you are
looking for in the list, please call us for a price quote. * May not be available from
stock, allows 4-6 weeks for delivery. **Dies not compatible with 6.5mm Grendel.
rcbs di e s - sm all b ase se t s
Price “Group 1” - Small Base – 2 Die Set
Part #
11103
11403
13303
13503
31303
13603
31403
14803
15303
30803
15503
Part #
specify
Caliber
223 Remington (5.56mm)
243 Winchester
6.8x43 Rem SPC
270 Winchester
270 WSM
7mm Remington Mag
7mm WSM
30-06 Springfield
300 Winchester Mag
300 WSM
308 Winchester
Description
Price Group 1 Small Base Set
Price “Group 2” - Small Base – 2 Die Set
Part #
10603
11503
14003
15103
14903
16303
31603
Part #
specify
42
HUNTINGTON DIE SPECIALTIES - 2014
Caliber
22-250
6mm Remington
280 Remington
300 Savage
308 Marlin Express
338 Winchester Mag
325 WSM
Description
Price Group 2 Small Base Set
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
reloading dieS / die parts
r c b s d ies - s mall base se ts/ sizers
Price “Group 3” - Small Base – 2 Die Sets
Part #
11703
28903
16403
Expander-Decap Assembly - Large Caliber
Caliber
5.7x28 (FN)
6x45-AR
264 LBC-AR *
Part #
9838
9840
9841
* Dies not compatible with 6.5mm Grendel (6.5×38).
Part #
9608
49628
9609
49629
90164
49630
9602
9619
9622
87507
87575
87586 Caliber
223 Rem. (5.56mm)
243 Winchester
6.8x43 Rem. SPC
270 Winchester
270 WSM
7mm Rem. Mag
7mm WSM
30-06 Springfield
300 Win. Mag
300 WSM
308 Win.
Price “Group 2” - Small Base Sizer Dies
10631
11531
14031
15131
14931
31631
16331
Tapered Expander-Decap Unit
Price “Group 3” - Small Base Sizer Dies
5.7x28 (FN)
6x45-A
264 LBC-AR *
6.5 Creedmoor
30 Rem AR
* Dies not compatible with 6.5mm Grendel (6.5×38).
die parts
Expander-Decap Units
Expander-Decapping Rods, Expander Balls and Decapping Pin Holders
are no longer available separately. Order complete Expander Decapping
Unit or Decapping Unit. Remember, the expander ball needs to be slightly
undersized (.001”) so case mouth will hold bullet during seating operation.
See Reference Section pages 74-79.
9882
.171
9808
.270
9819
9801
.20
9809
7mm
9820
.35
9836
.22 PPC
9817
8mm
9834
.355 SB
9800
.221
9812
.30
9821
.366
9802
.223
9813
.30 SB
9822
.375
9803
.226
9814
.310
9835
.40 SB
9806
.25
9815
.310 short
9825
.416
9805
6mm
9830
.317
9826
.45
9837
6mm PPC
9816
.320
9807
6.5mm
9818
.338
Part #
specify
Description
Small Decap Pins* (5)
Small Decap Pins* (50)
Large Decap Pins** (5)
Large Decap Pins** (50)
Headed Decapping Pins*** (5)
Headed Decapping Pins*** (50)
Decapping Pins- .50 bmg (2 pack)
Large Decapping Unit - Rifle
Short Decapping Unit - Pistol
Die Locking Ring 5-Pack 7/8”-14
Universal Decap Std. Unit (.22-.25)
Universal Decap HD unit (.27-.45)
(*) For .17-.25 Cal. (**) For 1980’s and earlier dies & Competiton.
(***) For current production dies - incl. .223 Rem.
22-250
6mm Rem. (.244 Rem)
280 Rem. (7mm Exp Rem)
300 Savage
308 Marlin Exp.
325 WSM
338 Win.
11731
28931
16431
32931
25331
Description
50 BMG Expander-Decap Rod Asy 416 Barrett Expander-Decap Rod Asy 460 Steyr Expander-Decap Rod Asy Miscellaneous Die Parts
Price “Group 1” - Small Base Sizer Dies
Part #
11131
11431
13331
13531
31331
13631
31431
14831
15331
30831
15531
di e part s
.348
Part #
9829
55000
9824
9833
9811
9832
55000
55000
9828
9823
55000
55000
55000
9827
Description
Taper Exp-decap Unit- 6mm Taper Exp-decap Unit- 25 cal
Taper Exp-decap Unit- 6.5mm T/CU
Taper Exp-decap Unit- 270 cal
Taper Exp-decap Unit- 7mm T/CU
Taper Exp-decap Unit- 30 cal Taper Exp-decap Unit- 318 cal Taper Exp-decap Unit- 8mm Taper Exp-decap Unit- 338 cal Taper Exp-decap Unit- 35 Whelan
Taper Exp-decap Unit- 366 cal
Taper Exp-decap Unit- 375 cal Taper Exp-decap Unit- 40 cal Taper Exp-decap Unit- 416 cal ho rnady carb i de e x pande r d ec a p
Hornady (RCBS type) Carbide Expander Decap Assemblies
Make your RCBS sizer die easier and more convenient to use. Designed
to fit RCBS dies. The carbide expander ball provides chatter-free neck
expansion, while reducing the need for inside neck lubrication. Includes
hardened steel elliptical expander, the same found on the New Dimension
Dies, which reduces neck stretching and leaves inside of neck extra
smooth.
Part #
Description
44692 Carbide Exp-decap Assy- 6mm /243 Win.
44698 Carbide Exp-decap Assy- 25 (25-20/256 W)
44695 Carbide Exp-decap Assy- 270 cal
( ) Discontinued by manufacturer and limited to stock on hand.
*
Description
Expander-Decap Unit
Toll Free Order Line 1-866-735-6237
43
< TOC >
reloading dieS
s pec ia l o r de r reloading die s
SPECIAL ORDERS (S.O.) CAN TAKE BETWEEN 90-120 DAYS FOR RCBS TO PRODUCE.
Part#
Description Group
56007 17 Ackley Bee (JGS)
56008 17 Ackley Hornet 30°
56009 17 Bumble Bee
56011 17 CCM (Cooper)
56014 17 Javelina
56016 17 K-Hornet 35° (JGS)
56910 17 Squirrel
56019 17 Super Jet (.17-22 Saunders)
56020 17-22 BR Bench Rest Remington
56021 17 / 22-250
56023 17-222 Remington
56024 17-222 Remington Mag
56025 17-223 Remington
56911 20 Ack Bee
56912 20 BR Remington
56913 20 PPC
56914 20-223 Rem.
56030 218 Mashburn Bee
56031 219 Zipper
56635 219 Zipper Imp 28° (JGS) w5 56032 219 Zipper Imp 40° w5
56033 219 Donaldson Wasp (JGS)
56034 22 BR Bench Rest Remington
56035 22 Carbine 5
56636 22 CCM (Cooper)
56036 22 Cheetah Mach 1 40° w 56037 22 Cheetah Mach 11 28° 5 56039 22 Long Snapper
56058 22 Lovell R-2
56040 22 Newton
56041 22 Niedner
56754 22 PPC
56810 22 Squirrel
56043 22 Super Jet (JGS) 5
56637 22 Winchester Center Fire
56811 22-243 Ack Imp (Clymer) 5
56812 22-243 Ack Imp 40° (JGS) 5
56048 22-243 MIDD
56049 22-243 Winchester
56813 22-6mm Ack Imp 40° (Clymer)
57060 22-6mm Ackley Imp 40° (JGS) 56050 22-6mm Remington
56051 22-6mm Remington C.J. (turned neck)
56046 22-250 Ack Imp 28° (JGS) 5
56047 22-250 Ack Imp 40° (JGS) 5
56052 22-284 Winchester
56053 22 / 30-30 Improved 40° (JGS) 5w 56055 22-308 Winchester
56056 22-3000 Lovell
56057 22-15-60 Stevens
56814 220 Jaybird 5
56060 220 Russian (5.6x39)
56061 220 Swift Imp 40° (JGS)(Clymer) 5w 56062 220 Weatherby Rocket
56063 220 Wilson Arrow
56815 222 Rem Mag Imp 40° 5
56738 223 Ack Imp 40° (JGS)
56817 5mm Rem Mag C.F.
566385.45x18
560655.45x39
56067 224 Clark 30° (JGS)
56068 224 Donaldson Ace
56069 224 Durham Jet
56071 224 Stark
56755 224 Weatherby
56072 5.6x35R Vierling
56819 5.6x45 Czech (22 - 7.62x45)
56073 5.6x50 Magnum
560745.6x57R S
56075 5.6x57 RWS S
44
SH
G 1
G 12
G 1
G l
G 10
G 2
All Special
G 12
Orders are
G 6
not subject to
G 3
Cancellation or
G 3
Return for
G 10
G 10Credit.
G 10
G 1
G 3
G 32
G 10
G 1
G 2
G 2
G2
G 2
G 3
G17
I
l
G 3
G 3
H 12
G l
G 3
G 2
G 32
G 12
G6
G 12
G3
G3
G 3
G 3
G 3
G 3
G 3
G 3
G3
G3
G 3
G 2
G 3
G l
I12
G3
G 32
G 11
G 11
G 11
G10
G 10
G l
H l
G l
G 3
G 11
G 3
G 18
G 27
G 12
G 32
G 10
G 4 / 26
G3/11/
Part#
HUNTINGTON DIE SPECIALTIES - 2014
Description Group
SH
56076 5.6x61 Vom Hofe Super Exp G 2
56077 5.7mm Johnson (.22 Spitfire)
G 17
56756 225 Winchester
G 11
56080 228 Ackley Mag
G 3
56083 230 Ackley Short
G 3
56085 234 RCBS
G 3
56086 234 Rock Chucker
G 3
56089 240 Apex Belted
G 3
56090 240 Cobra v G 11
56091 240 Flanged Nitro Exp
G 18
56092 240 Gibbs
G 3
56093 240 H&H Mag
G 4
56095 240 Page Souper Pooper
G 3
56096 243 Ackley Improved 40° (JGS) 5w G 3
56821 243 Catbird
G 3
56097 243 Mashburn Imp 30° (JGS) 5w G 3
56098 243 RCBS
G 3
56099 243 Rock Chucker (JGS)
G 3/11/
56100 243 Super Rock Chucker
G 3
56101 244 Ackley Imp 40°/ 6mm Rem Imp (JGS)5wG 3
56102 244 H&H Mag
G 4
56107 6mm BR Bench Rest Remington
G 3
56823 6mm Bretschneider
G 2
56111 6mm Donaldson Wasp
G 2
56824 6mm Remington Express
G 3
56639 6mm Mach IV
G 4
56116 6mm Musgrave
G 7
56118 6mm HLS
G 3
56119 6mm Lee Navy
G l
56825 6mm Norma BR
G 3
56120 6mm Remington International
G 3
56121 6mm Sabre
G 4
56123 6mm T/CU v
G10
56125 6x45 (6mm-223 Remington) v G 10
56126 6x47 (6mm-222 Remington Mag) v G 10
56826 6x47 SM Swiss Match
G 3
56127 6x54 M-S Mannlicher-Schoenauer
G 11
56128 6x61 Sharpe & Hart 5
G4/26/
56129 6x62 Freres
G 3
568276x70R
G l
56130 6mm-222 Remington v G 10
56131 6mm-250 Savage
G 3
56132 6mm-270 Winchester Improved 40° w G3
56133 6mm-284 Winchester
G 3
561346mm-06
G 3
56135 6mm-06 Improved 40° w G 3
56828 6mm / 30-30
G 2
56136 6mm/30-30 Ackley Imp 40° (JGS) 5w G 2
56137 6mm / 30-40 Krag
G 7
56138 25 Ackley Krag Imp 40° (JGS) 5w G 7
56139 25 Ackley Short Krag 28° 5
G7
56140 25 Gibbs
G 3
56141 25 IHMSA
G 3
56142 25 Krag
G 7
56144 25 Remington
G 19
56145 25 Souper (.25-308 Win.)
G 3
56640 25 T/CU v
G10
56146 25-06 Improved 40° 5w G 3
56147 25-06 Mashburn Imp 30° (JGS) 5w G 3
56148 25-20 Single Shot
G l
56149 25-21 Stevens
I23
56641 25-25 Stevens
I
l 56150 25-222 Remington Mag v G 10
56698 25-264 Winchester
G 4
56151 25-270 ICL
G 3
56152 25-284 Winchester
G 3
56153 25-303 British
G 7
56829 25-300 Rem Ultra Mag
G 38/4/
56830 25-300 WSM
G 43
56156 25-35 Ackley Improved 40° (JGS) 5w G 2
56159 25-36 Marlin
G 2
56160 250 Ackley Mag
G 4
56162 250 Savage Improved 28° (JGS) 5w G 3
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
s pec ia l o r de r reloading die s
SPECIAL ORDERS (S.O.) CAN TAKE BETWEEN 90-120 DAYS FOR RCBS TO PRODUCE.
Part#
Description Group
SH
56163 250 Savage Improved 40° (JGS) 5w G 3
56164 256 Gibbs SP
G 11/3/
56165 256 Newton
G 3
56757 256 Winchester
G 6
56751 257 STW
G 4
56171 260 AAR
G 3/11/ All Special
56832 260 Rem Imp 40° (Clymer) 5
G3
Orders are
56833 263 Sabre
G 3
not subject to
56921 6.17mm Spitfire
G 4
Cancellation or
56835 6.5 B.R. Rem
G 3
Return for
56172 6.5mm Gibbs
G 3
56173 6.5mm IHMSA
G 3Credit.
56836 6.5 Mathews Mag
G 4
56837 6.5 STW
G 4
56759 6.5mm T/CU v
G10
561766.5mx48R
G 21
56760 6.5x50 Japanese Arisaka
G 15
56915 6.5x52 Carcano
G 9
56177 6.5x53R Dutch (Romanian Mannlicher) G 7
56178 6.5x53.5 Daudeteau
G 13
56179 6.5x54 Kurz Mauser
G 3
56180 6.5x54R Steyr Mannlicher
G 7
56642 6.5x55 Ack Imp 40°(Jourdan)(Clymer)5w G 2
56182 6.5x55 Scandinavian
G 2
328016.5x57R
D 26
56184 6.5x58 Portuguese
G 3
561856.5x58R
G 21
56186 6.5x61 Sharpe & Hart
G 4/26/
56643 6.5x64 Brenneke
G 3
56187 6.5x65 RWS
G 3
56188 6.5x65R RWS
G 4
56838 6.5x68 R
G l
561906.5x70R
G l
56191 6.5mm-223 Remington v G 10
56192 6.5mm-257 Roberts v G 3/11/
56193 6.5mm-257 Rbrts Imp 40° (JGS)5wvG 3/11/
56195 6.5mm-06 Improved 40° (JGS)5w G 3
56196 6.5mm-08 Short
G 3
56839 6.5mm-300 Rem Ultra Mag
G 38/4
56197 6.5mm-300 Weatherby Mag
G 4
56840 6.5mm-300 WSM
G 43
56198 6.5mm-303 Epps
G 7
56199 6.5mm-308 Winchester
G 3
56200 6.5mm-378 Weatherby Mag
G 14
56644 6.5mm-8mm Remington Mag
G 4
56201 270 Ackley Mag
G 4
56204 270 Gibbs
G 3
56205 270 IHMSA
G 3
56206 270 ICL
G 3
56208 270 Ren (Carbide Taper Crimp)
H 12
56210 270 Winchester Imp 40° (JGS)5w G 3
56841 270 Rocket v
G11
56842 270 STW
G 4
56212 270-284 Winchester
G 3
56213 270-308 Winchester
G 3
56645 270-308 Winchester Imp 40° 5w G 3
56214 270-338 Winchester Mag
G 4
56646 7mm Dakota
G 41
56219 7mm Gibbs (.280 Gibbs)
G 3
56221 7mm H&H Flanged
G 18
56222 7mm IHMSA
G 3
56647 7mm International Rimmed
G 2
56223 7mm JRS (Wise Custom Guns)
G 3
56224 7mm L&L G 28
56226 7mm Nambu
H 17
56230 7mm Shooting Times Easterner
G 2
56232 7mm Short Mag
G 4
56234 7mm Super Mashburn Mag Short
G 4
56237 7mm TNT
G 3
56845 7mm Tombi
G *3/11
Part#
reloading dieS
Description Group
SH
56846 7x49 GJW G 10
56240 7x33 SAKO
G 16
56244 7x57 Improved 40°5w G 11
56245 7x57R Mauser
G 26
56246 7x6.5 Remington Mag v
G4
56247 7x61 Sharpe & Hart (7x61 Super)
G 4/26/
56248 7x66 Vom Hofe
G l
562497x72R
G 2/30/
56251 7x75R (CIP)
G 4
562527mm-06 v
G3
56253 7mm-06 Improved 40°5w G 3
56254 7mm-08 Improved 40° (JGS)5w G 3
56256 7mm-300 Weatherby Mag
G 4
56257 7mm-300 Winchester Mag
G 4
56847 7mm-300 WSM (Necked Down 300 WSM)G43
56260 7mm-348 Winchester Imp 40°5w G 5
56261 275 H&H Mag
G 4
56262 276 Newton
G 2
56263 276 Pedersen
G l
56848 277 GS G 34
56849 278 Ultra Mag (JGS)
G 38/4
56649 28-30-120 Stevens
I
l
56264 280 Flanged Nitro
G 5
56265 280 Remington Imp 30° (JGS)5w G 3
56266 280 Remington Imp 40° Ackley w G 3
56267 280 Ross
G l
56269 7.35mm Carcano
G 9
56271 7.5mm Swedish Nagant
H 1
56650 7.5mm Swiss Ordinance
H 1
56272 7.62mm Russian Nagant
H l/1
56273 7.62x25 Russian Tokarev
G 16
56274 7.62x45 Czech
G 32
56275 7.63mm Mannlicher
H 17
56276 7.65mm French MAS Auto
H l
56277 297-250 Rook Rifle
I12
56278 30 Ackley Mag #1
G 4
56279 30 Ackley Mag #2
G 4
56280 30 Alaskan Mag
G 4
56281 30 Belted Newton
G 4
56282 30 BR Bench Rest Remington v
G3
56740 30 Cody Exp (30-416 Cody-Rigby Case) G37
56284 30 Gibbs
G 3
56749 30 Guns & Ammo
G 41
56285 30 H&H Super Flanged
G l
56761 30 Herrett
G 2
56287 30 IHMSA
G 3
56289 30R Blaser
G 4
56290 30 Merrill v G 11
56291 30 Newton
G 4
56296 30-06 ICL Caribou5
G3
56297 30-06 Improved 40°5w G 3
5685030-221
G 10
56298 30-222 Remington v G 10
56300 30-223 Remington v G 10
56302 30-284 Winchester v G 3
56303 30-30 Ackley Improved 40°5w G 2
56851 30-338 Lapua
G 37/14
56304 30-350 Remington Mag
G 4
56306 30-378 Weatherby Improved 50° w G 14
56308 30-378 Weatherby Long 35° w G 14
56310 30-40 Krag Improved 40° (JGS)5w G7
56311 30-40 Krag 1.750”
G 7
56727 30-416 Rigby Imp 40°5w(RossSeyfried)G 37
56314 30-8mm Remington Mag
G 4
56852 300 Apex
G 4
56651 300 Dakota
G 41
56854 300 Gonzo G 37/14
56317 300 H&H Mag Improved 30°5w G 4
56318 300 H&H Mag Improved 40°5w G 4
56319 300 ICL Grizzly5
G4
56855 300 Hawk
G 3
56728 300 Jarrett
G 4
56856 300 Lapua Mag
G 37/14
Toll Free Order Line 1-866-735-6237
45
< TOC >
reloading dieS
s pec ia l o r de r reloading die s
SPECIAL ORDERS (S.O.) CAN TAKE BETWEEN 90-120 DAYS FOR RCBS TO PRODUCE.
Part#
Description Group
56857 300 Pegasus
56321 300 Phoenix (JGS)5
56322 300 RCBS Kodiak Mag
56323 300 Rook
56653 300 Super Mashburn
56858 300 Weaver
56324 300-295 Rook
56325 303 Epps
56762 303 Savage
56859 308 Ack Imp 40° / 308 Win Imp (JGS)
56860 308 Baer (Clymer)
56861 308 CorBon
56654 308 Hammond
56330308x1.5”
56331 310 Martini Cadet (.310” Greener)
56332 318 Westley-Richards
56333 32 Colt Long 
56334 32 Colt Short 
56656 32 Ideal
56335 32 Remington
56336 32 Smith & Wesson Short
56337 32 WSL Winchester Self Loading
56338 32-30 Remington
56339 32-35 Stevens
56340 32-40 Remington Hepburn
56341 32-44 Smith & Wesson Gallery
56343 7.92x33 Kurz Mauser
56345 8mm Gasser
56346 8mm Gibbs
56862 8mm Hawk
56347 8mm Kropatchek
56917 8mm Lebel Revolver French
56348 8mm Lebel
56350 8mm Nambu
56863 8mm-300 Rem Ultra Mag
56351 8mm Roth-Steyr
56352 8mm-06 Improved 40°5w 56354 8mm-338 Winchester Mag
568648mm-348
56358 8x50R Austrian
56359 8x50R Siamese Type 45
56360 8x51 Mauser Short
56361 8x51R / .318”  56657 8x51R / .323”  56362 8x52R Siamese Type 66
563638x54K
56364 8x56 Mannlicher-Schoenauer
56365 8x56R Hungarian v
56658 8x57J / .318”  56366 8x57JR / .318”  56368 8x57R-360 / .318”  56370 8x57RS / .323”  56371 8x58R Danish Krag
56372 8x58R /.318”  56373 8x60J /.318”  56374 8x60R / .318”  56375 8x60R Kropatchek
563768x60RS
56377 8x60S Mauser
563798x64S v 56380 8x64 /.318”  v 56381 8x65R / .318”  56659 8x65RS / .323”  56383 8x72R (7.8x72R)
56384 8x75R /.318”  563858x75RS
56773 8.15x46R / .318”
56386 8.15x46R / .321”
566608.5x63
56387 33 Guns & Ammo
46
SH
Retail
G 37/14
G37
G 4
I
l
G 4
G 38/4
All Special
I
l
Orders are
G 7
not
subject to
G 21
Cancellation or
G 3
Return for
G 4
G 41Credit.
G 4
G 3
I
l
G 3
H10
H10
H 1
G 19
H 23
I16
I6
I2
I7
H 1
G 3
H 16
G 3
G 3
G l
H 1
G l
H 25
G 38/4
H 17
G 3
G 4
G 5
G 13
G 14
G 3
G 26
G 26
G 14
G 7
G 3
G13
G 3
G 26
G 2
G 4
G 14
G 2
G 3
G 26
G 5
G 4
G 3
G 11
G 11
G 4
G 4
G 30
G 2
G 4/26/
G 2 G 2
G 3
G l
Part#
HUNTINGTON DIE SPECIALTIES - 2014
Description Group
SH
Retail
56763 33 Winchester
G 14
56661 330 Dakota
G l
56388 333 Jeffery
G 41
56389 333 Jeffery Flanged
G l
56391 338 A-Square Mag
G 14
56867 338 Excalibur
G 37/14
56868 338 Lapua Imp 40* G 37/14
56869 338 Scovill
G 3
56870 338 Weaver
G 38/4
56395 338-284 Winchester v G 3
56397 338-06 Improved 40°5wv(note) G3
56399 338-8mm Remington Mag
G 4
56871 338-300 Rem Ultra Mag v
G38/4
56662 338-300 Winchester Mag v
G4
56872 338-300 WSM v
G43
56633 338-378 KT
G 14
56873 338-404 Express
G 41
56404 338-416 Sniper (JGS)
G 37
56405 340 Gibbs 35°w G 3
56407 348 Ackley Imp 40° (JGS)5w G 5
56408 35 Ackley Mag
G 4
56874 35 Ack Mag Short 28°
G 4
56409 35 Belted Newton
G 4
56410 35 Brown-Whelen
G 3
56411 35 Gibbs 35° w G 3
56412 35 Newton
G 4
56414 35 Whelen Improved 40°5w G 3
56415 35 Winchester
G 7
56416 35 WSL Winchester Self Loading
I19
56417 35-284 Winchester
G 3
56418 35-8mm Remington Mag v
G4
56739 35-348 Ackley Improved (JGS)w
G5
56419 35-40 Maynard
I2
56420 350 #2 Flanged
G 4
56421 350 Rigby Mag
G 4
56423 351 WSL Winchester Self Loading
I19
56424 357 Auto Magnum
H 3
56764 357 Herrett
G 2
56426 357x44 Bain & Davis
H 18
56771 357x45 Grizzly Mag (LAR)
H 3
56875 358 Montana Mag
G 4
56766 358 Norma Magnum
G 4
56663 358 Shooting Times Alaskan
G 4
56876 358-300 Rem Ultra Mag v
G38/4
56877 358-338 Rem Ultra Mag v
G38/4
56430 9mm Browning Long
H 1
56665 9mm Largo / 9mm Bergman Bayard
H 16
56431 9mm Nambu
H 6
56433 9mm Steyr
H 16
56435 9mm Winchester Mag
H 16
56438 9x56 M-S Mannlicher-Schoenaur
G 3
56439 9x57 Mauser (9mm Mauser) v G 3
564409x57R
G 4
56441 9x72R (8.7x72R)
I30
56442 9.3x53R Swiss
G 13
564439.3x57 v
G3
564449.3x57R vG
l
56445 9.3x64 Brenneke
G l
567679.3x72R
I30
568799.3x82R
I30
564469.5x47R
I
l
564479.5x56 v G 3
564489.5x57 v G 3
56880 9.5x66 SE Von Hofe
G 28
56882 360 N.E. 2-1/4” .358”
I30
56883 360 N.E. 2-1/4” .366”
I30
56884 366-404 Jeffery
G 41
56750 375 Dakota
G l
56888 375 Express ( Ken Waters )
G 3
56453 375 H&H Mag Imp 40° (JGS)5w G 4
56456 375 JRS Mag
G 4
56458 375 Flanged Mag 2.94” (CIP)(JGS)
G l
56459 375 Flanged 2.5”
I24
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
s pec ia l o r de r reloading die s
SPECIAL ORDERS (S.O.) CAN TAKE BETWEEN 90-120 DAYS FOR RCBS TO PRODUCE.
Part#
Description Group
SH
56666 375 Scovill v
G3
56667 375 USA Mag
H 2
56461 375 Weatherby Mag
G 4
56462 375 Whelen v G 3
56668 375 Whelen Imp 40°5
G3
56463 375-284 Winchester G 3
All Special
56464 375-338 Winchester Mag v G 4
Orders are
56889 375-350 Rem Mag v
G4
not
subject to
56465 38 Colt Long
H 6
Cancellation or
56466 38 Colt Short
H 6
Return for
56467 38-40 Remington Hepburn
I7
56468 38-45 Auto
H 3Credit.
56469 38-50 Remington Hepburn
I7
56471 38-56 Shiloh Sharps
I14
56472 38-56 Winchester
I14
56473 38-70 Winchester
G 14
56474 38-72 Winchester
G 7
56919 38 Casull
H 3
56890 40 Super
G 36
56478 40-50 Sharps Bottle Neck 1-11/16 .403  I5/14/
56669 40-50 Sharps Bottle Neck 1-11/16 .408  I5/14/
56670 40-50 Sharps Bottle Neck 1-11/16 .410  I5/14/
56479 40-50 Sharps Straight .403”  I
l
56671 40-50 Sharps Straight .408”  I
l
56480 40-60 Marlin
I14
56481 40-60 Winchester .403”  I14
56672 40-60 Winchester .406”  I14
56482 40-65 Ron Long - .408”
I14
56484 40-65 Winchester .406”  I14
56485 40-70 Ballard
I4
56486 40-70 Sharps Bottle Neck 2-1/4 .406  I14
56675 40-70 Sharps Bottle Neck 2-1/4 .408  I14
56676 40-70 Sharps Bottle Neck 2-1/4 .410  I14
56678 40-70 Shiloh Sharps Bottle Neck 2.1 .408 I14
56679 40-70 Sharps Straight .403” 
I14
56488 40-70 Sharps Straight .406” 
I14
56681 40-70 Sharps Straight .410” 
I14
56489- 40-70 Winchester .406” 
I14
56490 40-72 Winchester .406”  I4/7/
56492 40-82 Winchester .406”  I14
56892 40-82 Winchester .408”
I14
56893 40-82 Winchester .410”
I14
56493 40-85 Ballard .403”  I14
56682 40-85 Ballard .408”  I14
56683 40-85 Ballard .410”  I14
56494 40-90 Sharps Bottle Neck 2-5/8 .403  I14
56684 40-90 Sharps Bottle Neck 2-5/8 .406  I14
56685 40-90 Sharps Bottle Neck 2-5/8 .408  I14
56686 40-90 Sharps Bottle Neck 2-5/8 .410  I14
56687 40-90 Shiloh Sharps Straight .408”
L
24
56496 40-110 Winchester
L
l
56497 400 Purdey
I
l
56498 400-350 Nitro Express
G 4
56500400-360-2-3/4”
G 4
56501 400-375 Belted Nitro Express
G 3
56502 401 Herter Mag
H 30
56503 401 WSL Winchester Self Loading
I
l
56895 404 Dakota
J
41
56768 41 Action Express (Carbide, TC)
H 16
56507 41 JMP Auto Mag
H 3
56508 41 Colt Long
H 27
56509 41 Colt Short
H 27
56510 41 Swiss Vetterli (10.4x38R)
L
5
56897 416 Dakota
J
41
56898 416 Hofman
G 4
56516 416 Taylor
G 4
56517 416 Weatherby Mag v G 14
56899 416-300 Rem Ultra Mag v
J38/4
56901 10.15 Jarman5L
l
5652010.3x60R
L l
Part#
reloading dieS
Description Group
SH
56688 10.4mm (.41) Swiss Revolver
H 30
56521 10.4x47R Italian Vetterli
L
5
56522 10.75x68
J
2
56524 425 Express
G 4
56525 425 Wesley-Richards
J
l
56526 11mm French Revolver
H 4/18/
56527 11mm Mauser (43 Mauser) (11.15x60R)
I22
56529 43 Egyptian
L
31 l
56530 43 Spanish
I22
56531 11x52R Neth Beaumont M71 / 78
L
31
56532 11x59 GRAS
L
l
56533 11.15x58R Werndle Model 77
L
l
5653411.15x65R
L 4
56535 11.2x51R Kropatchek
L
22
56536 11.2x72 Schuler
J
l
56537 11.3x50 R Beaumont M71
L
22
56539 11.7x51R Danish Remington
L
l
56540 44 Auto Magnum
H 3
56541 44 Auto Mag (carbide, taper crimp)
H 3
56542 44 Colt (Heel-type bullet)
H 18
56547 44 Smith & Wesson American
H 21/18/
56549 44-77 Sharps Bottle Neck
L
22
56550 44-90 Sharps Bottle Neck
L
22
56551 44-95 Peabody
L
l
56748 440 Corbon
K 33
56548 445 Super Mag
H 18
56552 45 Auto Shotshell
H 3
56554 45 Blaser
J
3
56770 45 Win. Mag (Taper Crimp) Steel
H 36
56557 45 Win. Mag (Carbide Taper Crimp)
H 36
56560 45-85 Winchester
L
14
56567 45-125 Winchester
L
47
56568 45-348 Winchester
L
5
56690 450 Ackley Mag 5
J4
56569 450 Alaskan 5
L5
56902 450 Dakota
J
37/14
56570 450 Guns & Ammo
J
41
56691 450 Magnum Express (Pistol)
H 3/36/
56903 450 Rem Ultra Mag
J
38/4
56571 450 Watts
L
4
56572 450 Webley Revolver
H l
56573 450 #1 BPE Black Powder Express
L
l
56574 450 #2 Musket
L
31
56575 450 #2 Nitro Express
J
l
56904 450-348 Ack Imp 40° (JGS)(Clymer)
L
5
56576 450x400 2-3/8”
L
l
56578 450x400 3-1/4” Nitro Express
J
l
56580 450 3-1/4” Nitro Express 5L
l
56583 455 Colt
H 26
56584 455 Webley MKII
H 38
56585 455 Webley Automatic
H 31
56587 458x2” American
I4
5658812.17x44R
L 5
56590 460 Guns & Ammo
L
41
56591 460 Guns & Ammo Long 3.000” max
L
l
56593 470 Ackley Mag
L
4
56692 470 Capstick
L
4
56595 475 A&M Mag
L
14
56596 475 Ackley Mag
L
4
56693 475 Linebaugh 1.600”
K 14
56599 475 Nitro Express
L
l
56600 475 Wildey
K 3
56601 475 #2 Jeffery
J
l
56602 475 #2 Nitro Express
J
l
56603 476 Nitro Express
L
l
56694 50 Action Exp (Carbide, Taper Crimp)
X 33
56604 50 Alaskan 5
L5
56605 50 Carbine 5
L31/5/
56608 50-110 Winchester
L
5 56609 50-140 Sharps Straight 3-1/4”
L
31
56615 500 Linebaugh 1.400”
K 5
56772 500 Linebaugh 1.400” (Carbide)
X 5
56695 500 Linebaugh 1.600”
K 5
Toll Free Order Line 1-866-735-6237
47
< TOC >
reloading dieS
HUNTINGTON DIE SPECIALTIES - 2014
s pec ia l o r de r reloading die s
SPECIAL ORDERS (S.O.) CAN TAKE BETWEEN 90-120 DAYS FOR RCBS TO PRODUCE.
Part#
56617
56907
56618
56619
56620
56611
56622
56625
56626
56627
56908
56628
56629
56909
56630
56631
56632
Description Group
SH
500 Nitro 3-1/4”
L
l
500-416 Nitro Exp. 3-1/4”
J
46
500-450 #1 Express
L
46
500-450 Nitro Expess 3-1/4”
L
46
500-465 Nitro Express
J
46
505 Barnes Supreme
J
4
All Special
510 Wells Express (JGS)
L
14
Orders are
577 Nitro Express 2-3/4”
X l
not subject to
577 Nitro Express 3”
X l
Cancelation or
577 Snider 5X
l
Return for
577 Tyrannasaur T-Rex
X l
Credit.
577-450 Martini-Henry
X l
577-500 Nitro Exp (3.130” Case Lgth)
X l
577-500 #2 Express (2.810” Length)
X l
585 Nyati
X l
600 Nitro Express
X l
600-577 Nitro 3”
X l
The ICONS in the preceding list indicate the following:
w = Shoulder angle of improved version.

= Sample bullet (not cartridge) required with order.
 = Bullet diameter.
l = Order shell holder by caliber.
 = When two or more shell holder numbers are given, the usual number is listed first.
 = Standard bore diameter (.403”) - alternate bore diameters:
.406”, .408”, .410”, and .412” Check bore diameter before ordering.
 = Standard bore diameter (.406”) - alternate bore diameters:.
.403”, .408”, .410”, and .412”. Check bore diameter before ordering.
v = Tapered expander-decapping Unit included in the sizer die.
 = Standard bore diameter (.408”) - alternate bore diameters: .403”, .406”, .410”, and .412”. Check bore diameter before ordering.
S = European manufactured cases only.
(Clymer)= Clymer print
(JGS) = JGS Print
5 = One or more variations are known to exist. This listing is for the most popular
version. If you are not sure of the version you need, send 3 sample fired cases so that
RCBS may check the dies before shipping.
VIDEO SERIES
Did you know that RCBS has a number of short, informative
product videos that are free to view online using a computer
and a high-speed internet connection.
www.rcbs.com/resources/videos
DESCRIPTION
DESCRIPTION
Featured Product: RCBS Reloading Dies
Reloading Tips: AR Dies
Reloading Tips: Cleaning Your Dies
Reloading Tips: Setting Seating Die
Reloading Tips: Lock Out Die
Reloading Tips: Powder Check Die
Reloading Tips: Univ. Hand Priming Tool
Featured Product: Auto. Priming Tool
FAQ: Assemble & Use Auto. Priming Tool
FAQ: Insert Primer Strips
Reloading Tips: Using Pro 2000
Featured Product: Pro 2000 Auto Index
FAQ: Install Pro 2000 Shell Plate
Featured Product: Pistol Bullet Feeder
Reloading Tips: Pistol Bullet Feeder
Featured Product: Rifle Bullet Feeder
Reloading Tips: Rifle Bullet Feeder
Featured Product: Turret Press
Featured Product: Turret Deluxe Kit
Reloading Tips: Turret Press Operation
Featured Product: Summit Press
Featured Product: Rock Chucker Supreme
Featured Product: Rock Chucker Kit
Reloading Tips: Univ. Case Prep Center
Featured Product: TrimMate Prep Center
Featured Product: Case Master Tool
Featured Product: ChargeMaster Combo
Featured Product: RangeMaster 750
Featured Product: Powder Measures
FAQ: Cleaning the Uniflow Measure
FAQ: Replace Powder Plastic Hopper
Reloading Tips: Hand Case Neck Turning
Featured Product: Vibratory Case Cleaner
FAQ: Properly Lube your Cases
FAQ: Stuck Case Remover Kit
FAQ: Use the Pow’r Pull Bullet Puller
Reloading Tips: Primer Staking Removal
FAQ: Primer Pocket Swager-2
All Special Orders are not subject to Cancellation or Return
for Credit. Unless the special order dies are in stock at the time
the order is placed, delivery can take up to 120 days. Dies not
in stock and ordered for customers are not returnable for credit.
sp e ci al o rde r lazz aro ni cal i b er s
Our catalog is also available online!
www.huntingtons.com
( 1-866-RELOADS 8 [email protected]
48
Part #
56921
56922
56923
56924
56925
56926
56927
56928
56929
56930
56931
56932
56933
56934
56935
56936
56937
Description
6.17mm Spitfire
6.53mm Scramjet
6.71mm Phantom
6.71mm Scorpion
7.21mm Firebird
7.21mm Tomahawk
7.82mm Warbird
7.82mm Patriot
8.59mm Titan
8.59 Galaxy
9.09mm Eagle
9.53mm Hellcat
9.53mm Saturn
10.57mm Maverick
10.57mm Meteor
12.04mm Lilmufu
12.04mm Bibamufu
Toll Free Order Line 1-866-735-6237
Die Group
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
S hell Holder
3
4
4
14
14
14
14
14
14
14
14
14
14
14
14
14
14
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
SPECIAL ORDER case forming di e s
NOTE: CASE FORMING
DIES (CFDS) ONLY FORM
THE BRASS. THEY ARE
NOT LOADING DIES.
SPECIAL ORDERS (S.O.) CAN TAKE
BETWEEN 90-120 DAYS FOR RCBS TO
PRODUCE.
Loading Dies are not included in a Case
Forming Set. Neck Reamer and Reamer Body
included only when required or requested.
See page 2, HDS Price List, (530) 534-1210.
Part#
58005
58006
58007
58008
58009
58010
58011
58012
58013
58014
58015
58016
58017
58018
58019
58022
58023
58024
58025
58026
58028
58031
58032
58036
58039
58038
58040
58041
58044
58045
58046
58047
58048
58051
58052
58055
58056
58057
58058
58059
58060
58064
58069
58070
58072
12065
11465
58075
58077
58078
58080
58449
58081
58083
58084
11565
Description Group
17 A&M Bee from 218 Bee
17 Ackley Bee from 218 Bee 17 Ackley Hornet from 22 Hornet 17 Bumble Bee from 218 Bee
17 Carbine from 30 Carbine
17 Javelina from 222 Rem. 17 Mach IV from 221 Rem., 17 Rem. FB
17 Mach IV from 222 Rem. & 223 Rem.
17 Rem. from 223 Rem. 17 / 22-250 from 22-250 17-221 Rem. from 221 Rem.
17-222 Rem. from 222 Rem.
17-222 Rem. from 222 Rem. w/Neck Ream Die
17-222 Rem. Mag from 222 Rem. Mag
17-223 Rem. from 223 Remington
218 Bee from 32-20 Win. 219 Donaldson Wasp from 219 Zipper
219 Donaldson Wasp from 30-30 WCF
219 Zipper from 25-35 Win.
219 Zipper from 30-30 WCF
219 Zipper Improved from 30-30 WCF
22 Cheetah Mach I from 308 Win./BR Rem.
22 Cheetah Mach ll from 308 Win./BR Rem. 22 PPC from 6mm PPC 22 Rem. Jet from 357 Mag 22 Rem. Jet from 256 Win. Mag
22 Savage Hi-Power from 25-35 Win.
22 Savage Hi-Power from 30-30 WCF
22-250 from 30-06 and 308 Win. 22-243 Win. from 243 Win. 22-284 Win. from 284 Win. 22 / 30-30 from 30-30 WCF 22-308 Win. from 308 Win. 221 Rem. from 222 Rem. 221 Rem. from 223 Rem. 224 Stark from 44 Rem. Mag 225 Win. from .30-30 WCF 228 Ackley from 30-06 5.6x35 Vierling from 22 Hornet
5.6x57 from 30-06 5.6x61 Vom Hofe from 9.3x62 5.7mm Johnson (223 PMC) from 30 Carbine
240 Flanged N Exp from 9.3x74R 240 Gibbs from 30-06 243 Rock Chucker from 257 Roberts 243 Super Rock Chucker from 30-06*
243 Win. from 6mm Rem.*
244 H&H Mag from 300 H&H Mag
6mm BR Rem. from 308 Win.
6mm BR Rem. from 7mm BR Rem. 6mm Donaldson Int. from .250 Savage
6mm Mach IV from 7mm Rem. Mag
6mm Rem. Int. from .250 Savage
6mm Rem. International from 308 Win.
6mm Lee Navy from 220 Swift 6mm Rem. from 257 Roberts*
G
G
G
G
H
G
All Special
G
Orders are
G
not subject to
G
Cancellation or
G
Return for
G
Credit.
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
A
A
G
G
G
G
G
G
G
G
A
Part#
58088
12065
58090
58091
58092
58094
58095
12065
58090
58101
58102
58103
58104
58107
58108
58110
58111
58112
26665
58115
9824
58117
27865
58118
58119
58120
58121
58123
58124
58125
58126
58127
58130
58131
58132
58133
58134
58136
58137
58139
58140
58141
14065
58146
58466
58149
58151
58152
26665
58160
58161
13865
58165
58166
58167
34065
58168
58170
58172
34865
58175
58179
58469
58180
58183
58184
58187
29465
58188
14765
58471
15065
58453
CASE forming dieS
Description Group
6mm Rem. from 30-06
6mm-06 from 30-06*
6mm-284 Win. from 284 Win.
6mm / 30-30 Ackley Imp from 30-30 WCF
6mm / 30-40 Krag from .30-40 Krag 6x61 S&H from 7x61 S&H
25 Ackley Krag Imp from 30-40 Krag 25-06 from 30-06* 25-284 Win. from 284 Win.
25-303 British from 303 British
25-308 Win. from 308 Win.
25-35 Ackley Imp from 30-30 WCF 25-35 Win. from 30-30 WCF
25-36 Marlin from 30-30 WCF
250 Ackley Mag from 300 H&H Mag 250 Savage from 30-06 and 308 Win. 256 Newton from 30-06 256 Win. Mag from 357 Mag 257 STW from 8mm Rem. Mag*
257 Weatherby Mag from 300 H&H Mag 260 Rem. from 243 Win.*
6.5mm Rem. Mag from 350 Rem. Mag
6.5mm-06 from 30-06
6.5mm-257 Roberts from 257 Rbrts & 30-06*
6.5mm-284 Win. from 284 Win. 6.5mm-300 Wby Mag from 300 Wby Mag
6.5mm-308 Win. from 308 Win. 6.5x50 Japanese Arisaka from 30-06 6.5x52 Carcano from 30-06 6.5x53R Dutch from 30-40 Krag, 303 Brit.
6.5x53.5 Daudeteau from 7.62 Russian 6.5x54 Kurz Mauser from 7x57 Mauser
6.5x54R Steyr from 303 British 6.5x57 from 30-06 6.5x57R from 8x57R 6.5x58 Portuguese from 30-06
6.5x58R from 30-30 WCF 6.5x68S from 300 H&H Mag
6.5x68S from 8x68S 270 Weatherby Mag from 300 H&H Mag 270-284 Win. from 284 Win. 275 H&H Mag from 7mm Rem. Mag 280 Rem. from 7x64 Brenneke* 7mm BR Rem. from 308 Win. 7mm Dakota from 404 Jeffery
7mm IHMSA from 300 Savage
7mm Mashburn from 300 Win. Mag 7mm Nambu from 30 M1 Carbine
7mm STW from 8mm Rem. Mag*
7mm Talbot from 308 Win.
7mm Weatherby Mag from 300 Win. Mag 7x57 Mauser from 30-06*
7x61 S&H from 7mm Rem. Mag
7x61 S&H from 300 H&H Mag 7x61 S&H from 300 Win. Mg, 338 Win. Mg
7x64 Bren. from 280 Rem.* 7x65R from 9.3x74R 7x72R from 9.3x72R 7mm-300 Wby Mag from 300 Wby Mag
7mm-30 Waters from 30-30 WCF*
30 Ackley Mag #1 from 300 H&H Mag 30 Gibbs from 30-06
30 Guns & Ammo from 404 Jeffery
30 Herrett from 30-30 WCF
30 Luger from 223 Remington 30 Mauser from 223 Remington
30-338 Win. from 300 H&H Mag
30-338 Win. from 338 Win.*
30-378 Weatherby Mag from 378 Wby Mag
30-40 Krag from 303 British* 300 Dakota from 404 Jeffery
300 H&H Mag from 375 H&H Mag* 300 Jamison from 404 Jeffery
Toll Free Order Line 1-866-735-6237
G
A
G
G
G
G
G
A
G
G
G
G
G
G
G
G
G
G
A
G
A
G
D
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
A
G
G
G
G
H
A
G
G
A
G
G
G
A
G
G
G
A
G
G
G
G
G
G
G
D
G
A
G
A
G
49
< TOC >
CASE forming dieS
c a s e forming dies
SPECIAL ORDERS (S.O.) CAN TAKE BETWEEN 90-120 DAYS FOR RCBS TO PRODUCE.
Part#
58192
58193
58194
15665
15565
58197
58198
58199
58200
58201
58202
58207
58208
58209
14365
58211
58212
58213
58214
58215
58216
58217
58219
58220
58221
58224
58225
58226
58227
58228
58229
58230
58231
58232
58233
58234
58237
58238
58448
15965
58240
58241
58223
58242
58243
58244
58249
58250
58251
58252
58474
58254
58476
58255
58495
58258
58259
58260
58264
58265
58266
58267
58268
58269
58270
58271
58272
58273
58274
50
Description Group
300 Savage from 30-06 300 Savage from 308 Win. 308 Norma Mag from 300 H&H Mag
308 Norma Mag from 300 Win Mag* 308 Win. from 30-06*
308x1.5” from 308 Win. 7.35mm Carcano from 6.5x54 M-S
7.5mm MAS from 284 Win. & 7.5mm S-R 7.5mm Swedish Nagant from 32-20 Win.
7.62mm Russian Nagant from 32-20 Win.
7.62mm Russian Tokarev from 223 Rem. 7.62x45 Czech from 6.5x50 Jap. Arisaka
7.62x45 Czech from 6.5x54 M-S 7.65 French MAS (Auto) from 30 M1 Carbine
7.65 Belgian Mauser from 30-06* 318 Westley Richards from 30-06 7.92mm Kurz from ->
-> 30-06, 308 Win., 8x57 Mauser 7.92 Kurz Blank from 308 Win. 32 WSL from 30 M1 Carbine 32-20 Win. from 25-20 Win. 32-30 Rem. from 222 Rem. 32-40 Rem. Hepburn from 30-40 Krag
32-40 Win. from 30-30 WCF
32-40 Win. from 38-55 Win. 32-44 S&W Gallery from 25-20 Win.
8mm French Rev. from 25-20 Win., 32-20 Win.
8mm Kropatchek from 348 Win. 8mm Lebel from 348 Win.
8mm Nambu from 30 Remington
8mm Nambu from 38 Special
8mm Roth-Steyr from 30 M1 Carbine
8x48R from 303 Savage 8x50 Austrian from 7.62mm Russian 8x50R from 7.62mm Russian 8x50R from 8x56R Hungarian 8x50R Siamese from Norma 7.62 Russian
8x52R Siamese (type 66) from 45-70
8x56 M-S from 8x57 Mauser 8x56 Hung. Mann. from 7.62 Russian (9)
8x57 Mauser from 30-06* 8x57R from 9.3x74R 8x57R-360 from 9.3x72R
8x58R Danish Krag from 45-70 US Govt.
8x58R /.318” from 30-40 Krag & 303 British
8x60J / .318” from 30-06
8x60RS from 9.3x74R
8x72R from 9.3x72R 8x75R / .318” from 9.3x74R 8x75RS from 405 basic 8.15x46R from 30-30 WCF 33 Guns & Ammo from 404 Jeffery
33 Win. from 45-70 US Govt.
330 Dakota from 404 Jeffery
333 Jeffery from 404 Jeffery
338-06 Imp. from 30-06
338-378 KT from 378 Wby Mag
338-378 Wby Mag from 378 Wby Mag
340 Wby Mag from 375 H&H Mag
35 Whelen Imp from 30-06 35 Win. from 7x65R 35 Win. from 9.3x74R 351 WSL from .357 Mag 35-284 Win. from 284 Win. 350 Rem. Mag from 7mm Rem. Mag, 338 Win.
350 #2 Flanged from 405 Basic 357 Auto Mag from 308 Win.
357 Auto Mag from 44 AM case
357 Herrett from 30-30 WCF 357 Herrett from 30-30 WCF w/neck ream
G
G
G
D
A
G
All Special
G
Orders are
G
not subject to
H
Cancellation
or
H
Return for
G
Credit.
G
G
H
A
G
G
G
I
G
I
I
G
G
H
H
G
G
H
H
H
G
G
G
G
G
G
G
G
A
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
I
G
G
G
H
H
G
G
Part#
58275
58276
58494
58278
58280
58281
58282
58283
58286
58288
58491
58295
58296
58297
58496
58298
58299
58300
58301
58302
58303
58304
58306
58307
58309
58310
58312
58314
58316
58318
58319
58321
58322
58323
58328
58331
58335
58337
58339
58340
58341
58342
58343
58344
58347
58349
58353
58357
58358
58361
58363
58367
58368
58371
58488
58374
58375
58378
58380
58381
58382
20965
58383
58385
58389
58397
58398
58403
58409
58410
58411
58413
HUNTINGTON DIE SPECIALTIES - 2014
Description Group
357 Herrett from 375 Win. 357-44 Bain & Davis from 44 Rem. Mag 357/45 Grizzly from 308 Win. or 30-06
358 Win. from 30-06 9x56 Mann. from 30-06
9x57 Mauser from 30-06 9x57 Mauser from 8x57 Mauser* 9x72R from 9.3x72R
9.3x53R Swiss from 7.62 Russian 9.3x62 from 30-06 (note headspace)
375 Howell from 404 Jeffery basic
375 Whelen from 30-06 375-284 Win. from 284 Win.
9.5x56 (9.5x57) M-S from ->
-> 30-06 & 8x57 Mauser
38 Casull from 45 Auto (45 ACP)
38 Long Colt from 38 Special
38 Short Colt from 38 Special
38 Special Blank from 357 Mag
38-40 Rem. Hepburn from 30-40 Krag
38-40 Win. from 44-40 Win.
38-45 Auto from 45 Auto (45 ACP) 38-55 Win. from 30-30 WCF 38-56 Win. from 45-70 US Govt., 45 basic 38-70 Win. from 45 Basic 3-1/4”
38-72 Win. from 405 Basic
40-50 Sharps Bottleneck from 45-70
40-50 Sharps Straight from 30-40 Krag
40-60 Marlin from 45-70 US Govt.
40-60 Win. from 45-70 US Govt.
40-65 Win. from 45-70 US Govt.
40-70 Ballard from 9.3x74R
40-70 Sharps Bottle Neck from 45 Basic 3-1/4”
40-70 Sharps Straight from 9.3x74R
40-70 Sharps Straight from 405 basic
40-82 Win. from 45 basic 3-1/4”
40-90 Sharps Bottleneck from HDS 45 3-1/4”
400-360 2-3/4” from 9.3x74R
401 Herter from 30-30 WCF
401 WSL from 35 Remington 405 Win. from 9.3x74R
405 Win. from 405 basic 41 JMP Auto Mag from 44 AM, 308 Win.
41 Long Colt from 30-30 WCF
41 Swiss Vetterli from 348 Win. 416 Rigby from 378 Weatherby Mag
416 Taylor from 458 Win. Mag 10.4x47R Italian Vetterli from 348 Win.
11x59 GRAS from 348 Win.
11.15x65R from 9.3x74R 11.7x51R Danish Rem. from 45-70
43 Egyptian from 50 Sharps basic 44 Auto Mag from 30-06 and 308 Win. 44 Colt from 44 Special 44 Russian from 44 Special
440 CorBon from 50 Action Express
44 S&W American from 41 Mag
44-40 Win. from 38-40 Win.
45 Auto (45 ACP) Shotshell from 308 Win.
45 Schofield from 45 Colt 45 Shot M15 from 30-06
45-60 Win. from 45-70 US Govt.
45-70 US Govt. from HDS 45 3-1/4”*
45-75 Win. from 348 Win. 45-75 Win. from 50x3-1/4” basic L
45-90 Win. from HDS 45 basic 3-1/4”
450 Alaskan from 348 Win.
450 Guns & Ammo from 404 Jeffery
450-400 2-3/8” from 450 Nitro Exp 455 Colt from 45 Colt
455 Webley from 45 Colt (Rem. cases)
458 Lott from 375 H&H Mag 458x2” American from H&H Mag case
Toll Free Order Line 1-866-735-6237
G
H
H
G
G
G
G
G
G
G
G
G
G
G
H
H
H
H
I
H
H
I
I
G
G
I
I
I
I
I
I
I
I
I
I
I
G
H
I
I
I
H
H
L
J
G
L
L
L
L
L
H
H
H
K
H
I
H
H
H
L
C
L
L
G
L
J
J
H
H
L
I
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
CASE forming dieS
c a s e forming dies
sp e ci alt y m e rchandi se i n f o
SPECIAL ORDERS (S.O.) CAN TAKE BETWEEN 90-120 DAYS FOR RCBS TO PRODUCE.
SPECIAL ORDERS (S.O.) CAN TAKE BETWEEN 90-120 DAYS FOR RCBS TO PRODUCE.
Part#
58414
58492
58420
58422
58426
58427
58431
58434
58439
58441
58442
58445
Description Group
460 Guns & Ammo from 404 Jeffery 460 G&A Long from 404 Jeffery 475 Linebaugh from 45-70 US Govt. 475 Wildey from 284 Win. 50-70 US Govt from 50 Sharps basic
50-90 Sharps Straight from 50 Sharps basic
50-140 Sharps Straight from 50 Sharps basic
500 Linebaugh from 348 Win. 500-465 Nitro Exp from 500 NE 3”
577 Snider from 577 basic 577-450 Martini Henry from 577 NE
585 Nyati from 577 NE L
L
K
K
I
L
L
K
L
X
X
X
The ICONS in the preceding list indicate the following:
1 = Case forming dies not required. Use full-length sizer die in final caliber for forming.
2 = The base diameter of this caliber is much larger than the .30-06 or similar cases
and therefore cannot be safely used for forming. Norma cases or ammunition in the
respective caliber is recommend.
3 = Case forming dies not required if full-length sizer die is equipped with a tapered
expander ball – beginning April 1983. For dies sold prior to April 1983 order a #9823
expander decapping unit, .35 Whelen, for installation in the sizer die. A #30765 trim
die, .35 Whelen, may also be needed.
4 = Case forming dies not required if full-length sizer die is equipped with a tapered
expander ball-beginning January 1999. For dies sold prior to January 1999, order a
#9823 expander decapping unit, .30 taper, for installation in the sizer die.
5 = Due to the length of this case a reamer die and reamer are not furnished. Cases
must be turned in a lathe to the correct wall thickness.
6 = The form set for .404 Jeffery Straight Tube (ST) cases requires an additional form
die and is reflected in the price.
7 = The form set for .404 Jeffery Straight Tube (ST) cases requires one less form die
and is reflected in the price.
8 = Case forming dies not required if full-length sizer die is equipped with a tapered
expander ball – beginning January 1999. For dies sold prior to January 1999, order a
#9832 expander decapping unit, .30 taper, for installation in the sizer die.
9 = Required only if RCBS Reloading Die Set was manufactured prior to 2000.
10 = European manufactured cases only.
** = This special case form die set is manufactured with the standard 7/8”-14 thread
and is designed to be used in a 4 or 5 station progressive presses as well as most
single stage presses. The dies are made extra long with the chambering at the bottom
so that an extended shell holder is not required. It uses a standard shell plate or shell
holder. There are four dies in the set, each forming the shoulder and neck in simple
steps to avoid crushing the .45 auto case.
* = Trim Die | *** = S.O. Neck Expander Die .22-to-.30 caliber
A-Press Parts
We stock a limited selection of A, A2, & A-3 Press parts. However, tell us
what you need, and if it is available, we will send you a quote.
Obsolete RCBS Parts
Includes: Shotshell Saver, and other obsolete items. If you are looking
for some specific hard-to-get or obsolete RCBS part, please drop us a
note and tell us what you are looking for. We will make every effort to
find it for you.
Neck Ream Dies
Designed to neck ream the inside of your cases.
The Die Body & Reamer are internally honed to
maintain perfect alignment between the reamer
and the case and are available in any caliber.
Available separately, see page 2, HDS Price List,
or call (530) 534-1210.
Soft Die Blanks
Available in 7/8”-14 thread in a variety of lengths. Please specify the
overall length that you want, $31.98 each (#57160). 1”-14 threaded die
blanks are available at $64.98 each (#57161). Die parts for the 1”-14
threaded dies are double the price for std. parts.
Special Large Bullet Puller
Starting from .470”-.577”
Die body and collet is either 1”-14 or 1-1/2”-12 thread $224.98 (#57177)
Extra large collets are $82.98 (#57179).
------------------------------------------------
Notice for Special Order Dies
Unless the special order dies are in stock at the time the order is
placed, delivery can take up to 3-months. Dies not in stock and
ordered for customer are not returnable for credit.
Service on Products
For service on RCBS products, return the items to RCBS with
samples and a complete explanation to:
ATK / RCBS
NOTES: ____________________________________________
605 Oro Dam Blvd East., Oroville, CA 95965
1-530-533-5191
1-800-533-5000
___________________________________________________
(The “800” number is for Customer Service only)
___________________________________________________
___________________________________________________
E-MAIL: [email protected]
WEB SITE: www.rcbs.com
------------------------------------------------
___________________________________________________
Huntington Die Specialties sells RCBS products, but they
are not affiliated, nor do we own RCBS. We will make every
effort to answer questions on RCBS products.
___________________________________________________
------------------------------------------------
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
Our catalog is also available online!
www.huntingtons.com
___________________________________________________
( 1-866-RELOADS 8 [email protected]
Toll Free Order Line 1-866-735-6237
51
BULLETS
n os l er bullets
Nosler Partition
The dual-core construction of
the Partition coupled with the
special lead-alloy core provides
mushrooming
characteristics
at
all impact velocities. The integral
Partition supports the expanded
mushroom and retains the rear leadalloy core. the special crimp locks
Nosler puts into each Partition adds
strength to resist deformation under
the pressure of heavy magnums.
Broad Range of Animals
Devastating Terminal Performance
Deep Penetration
Nosler Ballistic Tip Hunting
The hunting Ballistic Tip bullet is an
excellent choice for thin-skinned
game such as antelope, deer and
sheep. The tip is made from polymer
and is color coded by caliber. It is
designed to resist deformation in
the magazine and initiate expansion
upon impact. The fully tapered jacket
allows for a controlled expansion.
The Solid Base allows the bullet to
withstand ultra velocities while the
boat tail design combined with the
polymer tip allows for long range accuracy and
easier loading for the hand loader.
Polymer Tip ( Color-Coded by Caliber )
Fully-Tapered Jacket and Lead-Alloy Core
Ballistically Engineered Boat Tail Solid Base
High Ballistic Coefficient
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
Nosler AccuBond
Released in 2001, Nosler’s AccuBond High Performance Bonded
Core Bullets deliver expansion and
penetration with weight retention
at all normal hunting velocities and
ranges. The tapered, highly concentric bullet jacket is constructed
from gilding metal that produces
minimal fouling compared to most
bonded core bullets that use pure
copper jackets. The jacket is bonded to a lead alloy core that is engineered for
balanced expansion.
Signature White Polymer Tip
Tapered Copper-Alloy Gilding Metal Jacket
Lead-Alloy Core
Proprietary Bonding Process
Boat Tail Design
Nosler E-Tip “LEAD-FREE”
Introduced in 2008, the Nosler
E-Tip bullet was designed and developed out of necessity, as more
and more state agencies and local
ranges imposed “no-lead” restrictions on hunters and shooters.The
polymer tip initiates expansion.
Behind the tip is Nosler’s E2 Cavity is the Energy Expansion Cavity that provides a dual expansion
chamber for stopping power and
uniform expansion.
The boat tail design provides an efficient flight
profile for long-range performance and easier
hand loading.
OD Green Polymer Tip, Patent-Pending
E2 Cavity
Solid Gilding Metal Construction
Lead-Free
95% Weight Retention
part i t i o n
50 per box unless noted
22 Caliber / .224”
Part #
16316
Description
PAR 60 gr Spitzer
6mm / .243”
16314
16315
35642
PAR 85 gr Spitzer
PAR 95 gr Spitzer
PAR 100 gr Spitzer
25 Caliber / .257”
16317
16318
35643
PAR 100 gr Spitzer
PAR 115 gr Spitzer
PAR 120 gr Spitzer
6.5mm / .264”
16319
16320
16321
PAR 100 gr Spitzer
PAR 125 gr Spitzer
PAR 140 gr Spitzer
270 Caliber / .277”
16322
35200
16323
16324
PAR 130 gr Spitzer
PAR 140 gr Spitzer
PAR 150 gr Spitzer
PAR 160 gr Semi-Spitzer
7mm / .284”   
16325
16326
16327
35645
PAR 140 gr Spitzer
PAR 150 gr Spitzer
PAR 160 gr Spitzer
PAR 175 gr Spitzer
30 Caliber / .308”
16329
16330
16333
16331
25396
35626
16332
PAR 150 gr Spitzer
PAR 165 gr Spitzer
PAR 170 gr Round Nose wc
PAR 180 gr Spitzer
PAR 180 gr PP
PAR 200 gr Spitzer
PAR 220 gr Semi-Spitzer
8mm / .323”
35277
PAR 200 gr Spitzer
338 Caliber / .338”
16337
16436
35744
PAR 210 gr Spitzer
PAR 225 gr Spitzer (25 per box)
PAR 250 gr Spitzer (25 per box)
35 Caliber / .358”
44810
44811
PAR 225 gr Spitzer (25 per box)
PAR 250 gr Spitzer (25 per box)
9.3mm / .366”
44760
PAR 286 gr Spitzer (25 box)
Nosler Ballistic Tip Varmint
375 Caliber / .375”
Ballistic Tip Varmint bullets thrive on
ultra-high velocity loads, yet will go
the distance with spectacular results
all the way down to the lowest
practical velocity levels. Nosler
Ballistic Tip delivers match-grade
accuracy with all the performance
characteristics serious varminters
are looking for.
Polymer Tip
Ultra-Thin Jacket Mouth
Heavy Jacket Base
Varmint Jacket Wall Design
416 Caliber / .416”
52
44950
44945
45210
PAR 260 gr Spitzer sg (25 box)
PAR 300 gr Spitzer sg (25 box)
PAR 400 gr Spitzer sg (25 box)
45-70 Caliber / .458”
44745
PAR 500 gr Protected Point sg (25)
nosler rifle bullets continued
Nosler Bullet Legend
PAR = Partition BTH = Ballistic Tip Hunting
BTV = Ballistic Tip Varmint ACC = AccuBond
ET = E-Tip wc = with cannelure PP = Protected Point
sg = Seating Groove
Toll Free Order Line 1-866-735-6237
HUNTINGTON DIE SPECIALTIES - 2014
< TOC >
ballistic tip - hunting
accu bo nd
BULLETS
e-tip
50 per box
50 per box
50 per box
6mm / .243”
6mm / .243”
6mm / .243”
25 Caliber / .257” 25 Caliber / .257” 6.5mm / .264”
6.5mm / .264”
Part #
24090
24095
Description
BTH 90 gr Spitzer
BTH 95 gr Spitzer
25 Caliber / .257” 25100
25115
BTH 100 gr Spitzer
BTH 115 gr Spitzer
6.5mm / .264”
26100
26120
26140
BTH 100 gr Spitzer
BTH 120 gr Spitzer
BTH 140 gr Spitzer
270 Caliber /.277” 27130
27140
27150
BTH 130 gr Spitzer
BTH 140 gr Spitzer
BTH 150 gr Spitzer
7mm /.284”
28120
28140
28150
BTH 120gr Spitzer
BTH 140 gr Spitzer
BTH 150 gr Spitzer
30 Caliber / .308”
30125
30150
30165
30168
30180
BTH 125 gr Spitzer
BTH 150 gr Spitzer
BTH 165 gr Spitzer
BTH 168 gr Spitzer
BTH 180 gr Spitzer
8mm / .323” 32180
BTH 180 gr Spitzer
ballistic tip - varmint
100 per box
20 Caliber / .204”
Part #
35216
52111
Description
BTV 32 gr Spitzer
BTV 40 gr Spitzer
22 Caliber / .224” 39510
39522
39526
34992
BTV 40 gr Spitzer
BTV 50 gr Spitzer
BTV 55 gr Spitzer
BTV 60 gr Spitzer
Part #
56357
53742
56902
57873
Description
ACC 90 gr Spitzer
ACC 110 gr Spitzer
ACC 130 gr Spitzer
ACC 140 gr Spitzer
6.8mm / .277”
57845
54382
ACC 100 gr Spitzer wc
ACC 110 gr Spitzer wc NEW
270 Caliber / .277” 54987
54765
ACC 130 gr Spitzer
ACC 140 gr Spitzer
7mm / .284” 59992
54932
ACC 140 gr Spitzer
ACC 160 gr Spitzer
30 Caliber / .308” 52165 ACC 125gr (50) NEW
56719 ACC 150 gr Spitzer
55602 ACC 165 gr Spitzer
54825 ACC 180 gr Spitzer
54618 ACC 200 gr Spitzer
54374
ACC 200 gr Spitzer
338 Caliber / .338” 57625
56382
54357
57287
54851
ACC 180 gr Spitzer
ACC 200 gr Spitzer
ACC 225 gr Spitzer
ACC 250 gr Spitzer
ACC 300gr (50) NEW
35 Whelen / .358” 54425
50712
ACC 200 gr Spitzer
ACC 225 gr Spitzer
9.3mm / .366”
59756
ACC 250 gr Spitzer
375 Caliber / .375” 54413
53662
ACC 260 gr Spitzer wc
ACC 300 gr Spitzer wc
59765
ET 100 gr Spitzer
ET 120 gr Spitzer NEW
6.8mm / .277”
59543
ET 85 gr Spitzer
270 Caliber / .277” 59298
ET 130 gr Spitzer
7mm / .284” 59955
59426
ET 140 gr Spitzer
ET 150 gr Spitzer
30 Caliber / .308” 59378
59415
59180
ET 150 gr Spitzer
ET 168 gr Spitzer
ET 180 gr Spitzer
8mm / .323”
59265
ET 180 gr Spitzer
338 Caliber / .338” 59186
ET 200 gr Spitzer
NOTES: __________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
BTV 55 gr Spitzer
BTV 70 gr Spitzer
BTV 80 gr Spitzer
_________________________________
25 Caliber / .257”
43004
59456
Description
ET 90 gr Spitzer
8mm / .323” 6mm / .243” 24055
39532
24080
Part #
59165
_________________________________
BTV 85 gr Spitzer
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
Our catalog is also available online!
www.huntingtons.com
( 1-866-RELOADS 8 [email protected]
Toll Free Order Line 1-866-735-6237
_________________________________
_________________________________
_________________________________
53
BULLETS
h o r na d y r ifl e bulle ts
GMX
Gilded Metal Expanding monolithic bullet.
These bullets are constructed of the same
gilding metal used in Hornady hunting
bullets. This gilding metal differs from solid
copper in that it’s harder, tougher and does
not foul or increase pressure the way solid
copper bullets do. Expands up to 1.5 times
their original diameter, retaining 95% of the
original weight, penetrating 30 inches or more.
MONOFLEX
Gives lever gun shooters another option.
Constructed of gilding metal, MonoFlex
bullets offer hunters a solid that won’t
separate, and when recovered, retains 95%
of the original weight. Gilding metal differs
from solid copper in that it is harder, tougher
and does not foul or increase pressure. Flex
Tip design initiaties expansion in mid to long
range lever gun shooting situations.
INTERBOND
InterBond bullet uses a proprietary bonding
process holds the bullet together that
delivers a deep, wide wound channel without
overpenetrating. A thicker, stiffer jacket
allows InterBond bullets to retain more than
90% of the original weight. The polymer tip
improves ballistic performance, accuracy
and initiation of expansion.
SST
Super Shock Tip for high velocity, flat
trajectories
and
reliable,
controlled
expansion. The cannelure provides accurate
and consistent crimping, and also works
with InterLock ring to ensure the core and
jacket remain locked during expansion. The
polymer tip improves ballistic performance,
accuracy and initiation of expansion.
FTX RIFLE
Flex Tip technology which allows hunters
to safely shoot this pointed tip bullet in
firearms with tubular magazines. This is
the same bullet loaded in LEVERevolution
factory ammo. Delivers flat trajectories. The
cannelure provides accurate and consistent
crimping, and also works with InterLock ring
to ensure the core and jacket remain locked
during expansion. The polymer tip improves
ballistic performance, accuracy and initiation
of expansion.
V-MAX
Varmint bullet with polymer tip and
streamlined design results in ultra flat
trajectories. The match grade jacket design
provides accuracy at all ranges as well
as expansion, even at low velocities. The
polymer tip improves ballistic performance,
accuracy and initiation of expansion. Some
calibers available in Moly coating.
54
< TOC >
NTX & VARMINT
NTX bullets provide peerless performance
from a bullet with an alternative core material
that delivers accuracy, performance and
quality for use in areas with restrictions on
the use of lead.
INTERLOCK
Interlock bullets feature an exposed lead
tip for controlled expansion and terminal
performance. Most have secant ogive design.
Inner grooves strategically weaken the upper
section of the jacket, ensuring controlled
expansion even at long ranges. The cannelure
provides accurate and consistent crimping,
and also works with InterLock ring to ensure
the core and jacket remain locked during
expansion.
FMJ
Full Metal Jacket bullets with lead core.
DGX
Dangerous Game Expanding. The flat exposed
nose aids in expansion and penetration,
reducing deflection. The serrated nose section
of the jacket give controlled expansion, and
weight retention. The cannelure provides
accurate and consistent crimping, and also
works with InterLock ring to ensure the core
and jacket remain locked during expansion.
DGS
Dangerous Game Solid. The flat nose
aids penetration, reducing deflection. The
cannelure provides accurate and consistent
crimping, and also works with InterLock ring
to ensure the core and jacket remain locked
and resist deformation for deep penetration.
MATCH
All Match bullets incorporate AMP (Advanced
Manufacturing Process) bullet jackets which
produce consistently concentric bullets.
Swaged lead cores provides uniformity for
consistent performance.
A-MAX
All A-MAX bullets incorporate AMP (Advanced
Manufacturing Process) bullet jackets which
produce consistently concentric bullets. The
aerodynamic secant ogive profile, the sharp
pointed tip give it a high ballistic coefficient.
FTX HANDGUN
Hornady offers the same Flex
Tip technology for handguns that
revolutionized the lever gun industry! FTX
bullets achieve reliable expansion over
a wide range of velocities. Upon impact,
the FTX tip is compressed into the front
of the bullet, causing the bullet to expand
and transfer a great deal of energy for a
devastating temporary cavity- even at low
velocity.
HUNTINGTON DIE SPECIALTIES - 2014
XTP HANDGUN
Originally designed for hunting, selfdefense and law enforcement application,
the XTP bullet demonstrated the kind
of accuracy that led many competitive
shooters to adopt it. XTP bullets were
designed to expand at a wide range
of handgun velocities to deliver deep,
terminal penetration.
HAP HANDGUN
Modeled after the legendary XTP bullet
design, HAP (Hornady Action Pistol) bullets
are further refined into a competition
projectile. HAP bullets are sleek and
balanced projectile with a protected nose
that aids in consistent and reliable feeding in autos. Bullet
jackets featuring concentricity combined with precision
swaged cores deliver accuracy and performance.
FMJ HANDGUN
Full Metal Jacket handgun bullets have long served as
a standard for target shooting applications. The Hornady
FMJ features a heavier jacket, and punches into targets
without deforming or breaking the jacket. Hornady FMJ
bullets are designed and manufactured to give superior
functioning in semi-automatic handguns, and matchgrade accuracy. •
100 per box unless noted
17 Caliber (.172”)
Part #
21710
1710
17105
Description
20 gr V-Max
25 gr Varmint HP
25 gr V-Max
20 Caliber (.204”)
22000
22004
22006
22008
30 gr NTX
32 gr V-Max
40 gr V-Max BT
45 gr Varmint SP
22 Caliber (.222”)
2210
40 gr Varmint Jet FN
22 Caliber (.223”)
2220
45 gr Varmint Hornet SP
22 Caliber (.224”)
22252
22240
22241
2229
2230
22261
22613
2240
2245
22403
2249
22492
22265
2250
22271
22713
2260
2265
2266
2267
22272
22273
22281
35 gr V-Max
35 gr NTX
40 gr V-Max BT
45 gr Varmint HP Bee w/c
45 gr Varmint Hornet
50 gr V-Max BT
50 gr V-Max Moly BT
50 gr Varmint SP SX
50 gr Varmint SP
50 gr GMX (50 box)
52 gr BT HP Match
52 gr A-Max BT
53 gr V-Max BT
53 gr HP Match
55 gr V-Max
55 gr V-Max Moly
55 gr Varmint SP SX
55 gr Varmint SP
55 gr Varmint SP w/c
55 gr IL FMJ BT w/c
55 gr V-Max w/c
55 gr GMX (50 box)
60 gr V-Max
hornady rifle bullets continued
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
h o r na d y r ifl e bulle ts
2270
2275
2278
2281
2279
22792
22832
60 gr Varmint SP
60 gr Varmint HP
68 gr BT HP Match
70 gr GMX (50 box)
75 gr BT HP Match
75 gr A-Max BT
80 gr A-Max BT
22 Caliber (.227”)
2280
70 gr. SP w/c (.227”)
6mm (.243”)
22411
22415
2420
22420
24370
24539
2440
2442
22440
24532
2453
2458
24562
58 gr V-Max BT
65 gr V-Max BT
75 gr Varmint HP
75 gr V-Max BT
80 gr GMX (50 box)
85 gr IB BT
87 gr SP
87 gr Varmint BT HP
87 gr V-Max BT
95 gr SST w/c
100 gr IL BT SP w/c
105 gr BT HP Match
105 gr A-Max BT
25 Caliber (.257”)
2510
2520
22520
2530
2540
25419
25410
2550
2552
25522
2560
60 gr IL FP
75 gr Varmint HP
75 gr V-Max BT
87 gr Varmint SP
100 gr IL SP w/c
110 gr IB BT
110 gr GMX (50 box)
117 gr IL RN w/c
117 gr IL BT SP w/c
117 gr SST w/c
120 gr IL HP w/c
6.5mm (.264”)
22601
26101
26172
26110
26171
26173
2620
26202
26209
26335
2630
26302
26332
2645
95 gr V-Max
100 gr A-Max BT
120 gr A-Max BT
120 gr GMX (50 box)
123 gr A-Max BT
123 gr SST
129 gr IL SP w/c
129 gr SST BT w/c
129 gr IB BT
140 gr BT HP Match
140 gr IL SP w/c
140 gr SST BT w/c
140 gr A-Max BT
160 gr IL RN SN w/c (.268”) Graf
270 Caliber (.277”)
2710
2720
27200
22721
2716
2730
27302
27309
27370
2735
27352
2740
27402
27409
100 gr Varmint SP
110 gr Varmint HP
110 gr BT HP Match w/c (6.8mm)
110 gr V-Max BT w/c (6.8mm)
120 gr SST w/c (6.8mm)
130 gr IL SP w/c
130 gr SST BT w/c
130 gr IB BT
130 gr GMX (50)
140 gr IL BT SP w/c
140 gr SST BT w/c
150 gr IL SP w/c
150 gr SST BT w/c
150 gr IB BT
7mm (.284”)
2815
22810
2820
28202
28209
2825
28270
2830
28302
28309
28405
2845
28402
28452
2850
2855
120 gr Varmint HP
120 gr V-Max
139 gr IL SP w/c
139 gr SST BT w/c
139 gr IB BT
139 gr IL BT SP w/c
139 gr GMX (50 box)
154 gr IL SP w/c
154 gr SST BT w/c
154 gr IB BT
162 gr BT HP Match
162 gr IL BT SP w/c
162 gr A-Max BT
162 gr SST BT w/c
175 gr IL SP w/c
175 gr IL RN w/c
30 Caliber (.308”)
3005
3010
3015
3017
23010
3019
3020
30311
30302
30309
3031
3033
3035
3037
30370
30303
30312
30395
30396
3040
3045
30452
30459
30470
30501
30502
3060
30715
30712
30709
3070
3072
3075
30702
3085
30733
30732
3090
30903
2950
100 gr Varmint SJ
110 gr Varmint SP
110 gr IL RN
110 gr IL FMJ
110 gr V-Max
125 gr SST
130 gr Varmint SP
140 gr Monoflex .308 MX (50 box)
150 gr SST BT w/c
150 gr IB BT
150 gr IL SP w/c
150 gr IL BT SP w/c
150 gr IL RN w/c (.30-30)
150 gr IL FMJ BT w/c
150 gr GMX (50 box)
150 gr SST BT w/c (.300 Savage)
155 gr A-Max BT
160 gr FTX BT w/c (.30-30)
160 gr FTX BT w/c (.308 MX)
165 gr IL SP w/c
165 gr IL BT SP w/c
165 gr SST BT w/c
165 gr IB BT
165 gr GMX (50)
168 gr BT HP Match
168 gr A-Max BT
170 gr IL FP w/c (.30-30)
178 gr BT HP Match
178 gr A-Max BT
180 gr IB BT
180 gr IL SP w/c
180 gr IL BT SP w/c
180 gr IL RN w/c
180 gr SST BT w/c
190 gr IL BT SP w/c
208 gr BT HP Match
208 gr A-Max BT
220 gr IL RN w/c
225 gr BT HP Match
7.35 Carcano 128gr SP (.300”) Graf
7.62mm (.310”)
3140
3142
123 gr IL SP w/c
123 gr SST w/c
303 Caliber & 7.7 Japanese (.312”)
3120
3130
3131
150 gr IL SP w/c
174 gr IL RN w/c
174 gr IL FMJ BT w/c (.3105”)
32 Caliber (.321”)
3210
32005
170 gr IL FP w/c
165 gr FTX w/c
w/c = with cannelure
Toll Free Order Line 1-866-735-6237
BULLETS
8mm (.323”)
3232
3235
3233
3234
3236
150 gr IL SP w/c
170 gr IL RN w/c
170gr SST (100) NEW
180 gr GMX
195 gr IL SP w/c
338 Caliber (.338”)
33270
3310
33102
33104
3320
33202
33209
3330
3335
33361
3338
3339
185 gr GMX (50 box)
200 gr IL SP-RP w/c
200 gr SST BT w/c
200 gr FTX BT w/c (.338 MX)
225 gr IL SP-RP w/c
225 gr SST BT w/c
225 gr IB BT
250 gr IL RN w/c
250 gr IL SP-RP w/c
250 gr BT HP Match (50)
285gr A-Max (50) NEW
285 gr BT HP Match (50)
348 Caliber (.348”)
3410
3415
200 gr IL FP w/c
200 gt FTX w/c
35 Caliber (.358”)
3505
3510
3515
35105
3520
180 gr IL SP-SSP w/c
200 gr IL SP w/c
200 gr IL RN w/c
200 gr FTX w/c
250 gr IL SP-RP w/c
9.3mm (.366”)
3562
3560
3565
250 gr GMX
286 gr IL SP-RP w/c (50)
300 gr DGS w/c (50)
375 Caliber (.375”)
3705
3706
3708
3711
3721
3727
220 gr IL FP w/c (.375 Win)
225 gr IL SP-RP w/c
250 gr GMX
270 gr IL SP-RP w/c (50)
300 gr DGX w/c (50)
300 gr DGS w/c (50)
400 Caliber (.410”) (.450-400 Ruger)
4103
4104
400 gr DGS w/c (50)
400 gr DGX w/c (50)
405 Caliber (.411”)
41050
41051
300 gr IL FP w/c (50)
300 gr IL SP w/c (50)
416 Caliber (.416”)
4169
4165
4167
400 gr DGX w/c (per 50)
400 gr IL RN w/c (per 50)
400 gr DGS w/c (per 50)
423 Caliber (.423”)
4240
4241
400 gr DGX w/c (50)
400 gr DGS w/c (50)
hornady RIFLE bullets continued
Hornady Bullet Legend
BT = Boat Tail
CL = Crimp Lock
DGS = Dangerous Game Solid
DGX = Dangerous Game Expdg
ENC = Encapsulated
FMJ = Full Metal Jacket FP = Flat Point
TX = Flex Tip Expanding
GMX = Gilding Metal Expanding
HBWC = Hollow Base Wad.
HP = Hollow Point
IL = InterLock Bullet
IB = InterBond Bullet JFP = Jacket Flat Point
L = Swaged Lead Bullet
LRN = Lead Round Nose
NTX = non-lead core
w/Moly = Moly-Coated
RN = Round Nose
SIL = Silhouette
SJ = Short Jacket
SP = Spire Point
SP-RP = Spire Point Recoil Proof
SST = Super Shock Tipped
SSP = Single Shot Pistol
SWC = Semi-Wadcutter
SX = Super Explosive
VX = Varmint Express
w/c = with cannelure
XTP = Extreme Terminal Perf.
55
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
hornad y pistol bullets
wo o dle i g h b u l l et s
BULLETS
h o r na d y r ifl e bulle ts
hornady bullets continued
100 per box unless noted
44 Caliber (.430”)
30 Caliber (.308”-.309”)
45 Caliber (.458”)
32 Caliber (.312”)
4300
4305
45201
45010
4500
45015
4502
4503
45032
45033
4504
4505
4507
265 gr IL FP w/c
265 gr FTX w/c .444 Marlin (50)
250 gr FTX .450 Bush .452” (50)
250 gr MonoFlex (50)
300 gr IL HP w/c (per 50)
325 gr FTX .45-70 w/c (50 box)
350 gr IL RN w/c (per 50)
350 gr IL FP w/c (per 50)
480 gr DGX NE w/c (per 50)
480 gr DGS NE w/c (per 50)
500 gr IL RN w/c (per 50)
500 gr DGX w/c (per 50)
500 gr DGS w/c (per 50)
470 Caliber (.474”)
4747
4748
500 gr DGX w/c (per 50)
500 gr DGS w/c (per 50)
50 Caliber (.510”)
5150
5155
5165
570 gr DGX w/c (per 50)
570 gr DGS w/c (per 50)
750 gr A-Max (per 20)
505 Caliber (.505”) (505 Gibbs)
5050
5051
525 gr DGX w/c 505 Gibbs (per 50)
525 gr DGS w/c 505 Gibbs (per 50)
hornady lead round balls
100 per box unless noted
Part #
6000
6003
6010
6020
6025
6030
6040
6050
6060
6070
6080
6088
6090
6093
6095
6100
6110
6120
Description
32 Cal Round Ball .310
32 Cal Round Ball .315
36 Cal Round Ball .350
36 Cal Round Ball .375
40 Cal Round Ball .395
44 Cal Round Ball .433
45 Cal Round Ball .440
45 Cal Round Ball .445
44 Cal Round Ball .451
44 Cal Round Ball .454
45 Cal Round Ball .457
50 Cal Round Ball .480
50 Cal Round Ball .490
50 Cal Round Ball .495
53 Cal Round Ball .520
54 Cal Round Ball .530
54 Cal Round Ball .535
58 Cal Round Ball .570 (50 box)
Hornady Bullet Legend
BT = Boat Tail
CL = Crimp Lock
DGS = Dangerous Game Solid
DGX = Dangerous Game Expdg
ENC = Encapsulated
FMJ = Full Metal Jacket FP = Flat Point
TX = Flex Tip Expanding
GMX = Gilding Metal Expanding
HBWC = Hollow Base Wad.
HP = Hollow Point
IL = InterLock Bullet
IB = InterBond Bullet JFP = Jacket Flat Point
L = Swaged Lead Bullet
56
LRN = Lead Round Nose
NTX = non-lead core
w/Moly = Moly-Coated
RN = Round Nose
SIL = Silhouette
SJ = Short Jacket
SP = Spire Point
SP-RP = Spire Point Recoil Proof
SST = Super Shock Tipped
SSP = Single Shot Pistol
SWC = Semi-Wadcutter
SX = Super Explosive
VX = Varmint Express
w/c = with cannelure
XTP = Extreme Terminal Perf.
Part #
3100
31000
32010
32050
32070
Description
86 gr XTP SP RN w/c (Mauser)
90 gr XTP HP .309”
60 gr XTP HP
85 gr XTP HP w/c
100 gr XTP HP w/c
9mm (.355”)
35500
35540
35557
35571
35580
90 gr XTP HP
115 gr XTP HP
115 gr Target FMJ RN ENC
9mm 124 gr XTP HP
147 gr XTP HP
9x18 Makarov (.365”)
36500
95 gr XTP HP
38 Caliber (.357”)
35700
35710
35730
35740
35745
35750
35780
35771
110 gr XTP HP w/c
125 gr XTP HP w/c
125 gr XTP FP w/c
140 gr XTP HP w/c
140 gr FTX w/c*
158 gr XTP HP w/c
158 gr XTP FP w/c
180 gr XTP HP w/c
*NOTE: Requires a shorter case trim length of 1.250”.
10mm / 40 Caliber (.400”)
40000
40040
40060
155 gr XTP HP
180 gr XTP HP
200 gr XTP HP
41 Caliber (.410”)
41000
210 gr XTP HP w/c
44 Caliber (.430”)
44050 180 gr XTP HP w/c
44100 200 gr XTP HP
44105 225 gr FTX w/c*
44200 240 gr XTP HP w/c
44280 300 gr XTP HP w/c (50)
*NOTE: Requires a shorter case trim length of 1.255”.
45 Caliber (.451”)
45100
45137
45140
45160
45177
185 gr XTP HP
185 gr Target SWC ENC
200 gr XTP HP
230 gr XTP HP
230 gr Target FMJ RN ENC
45 Caliber (.452”)
45215
45218
45220
45200
45230
45235
200 gr FTX .460 S&W w/c (50)
225 gr FTX .45 Colt w/c
240 gr XTP MAG w/c
250 gr XTP HP w/c
300 gr XTP HP w/c (50)
300 gr XTP MAG w/c (50)
475 Caliber (.475”)
47500
325 gr XTP MAG w/c (50)
500 Caliber (.500”)
50101
50102
50100
50105
500 AE 300 gr XTP MAG (50)
300 gr FTX .500 S&W w/c (50)
500 S&W 350 gr XTP MAG w/c (50)
500 S&W 500 gr FP XTP w/c (per 50)
w/c = with cannelure
Toll Free Order Line 1-866-735-6237
Woodleigh Premium All Game Bullets are made
by deep drawing copper and steel bullet jackets to the proper taper. The jackets are then
heat-treated to provide the optimum metallurgical finished jacket. The bullets follow the original British profiles to provide ease of regulating
double rifles.
FMJ Solids The most heavily
constructed steel jacketed solids
available. Made from extra deep
drawing grade steel that have
been plated with a 90/10 gilding
metal alloy. The base of the bullet
is rolled back 90 degrees to provide a double strength heel to prevent core loss
on impact.
Weldcore Soft Nose are made
from 90/10 gilding metal (90%
copper: 10% zinc) 1.6mm thick.
Weldcore soft nose bullets are
made with pure lead cores that
have been welded to the jacket to
deliver maximum retained weight.
This minimizes fragmentation of the nose section as it mushrooms, so that deep penetration
for rapid and humane killing of tough animals is
obtained.
Protected Point bullets are a
very popular all round bullet to suit
a variety of conditions. The higher
ballistic coefficient bullet design
features internal grooves at the
nose section strategically weaken
the front jacket area for consistent
controlled expansion. The lead cores are bonded to the jacket for controlled expansion. The
small flat nose with minimal lead showing will
not deform under recoil in the magazine of bolt
action rifles.
Hydrostatically Stabilized Bullets*
(Hydro-Solid) that has the power
of an expanding bullet and penetration of a solid. Lead-free Hydro-Solid bullets resist deflection,
deliver tremendous shock transfer
and achieve deep straight-line
penetration. These bullets do not
rely on expansion for its killing ef- CONVENTIONAL
fect, as the benefit of this design HYDRO-SOLID
is that the pressure ring creates a devastating
wound channel and massive hydraulic shock
transfer. The bullet actually travels in a low
pressure cavitation bubble which aids in bullet
stabilisation and greatly increases penetration
due to significant reductions in frictional forces acting on the bullet We strongly recommend
that all ammunition is cycled through the mag-
continued on page 57 >>
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
w o od l eigh bulle ts
azine to ensure reliable feeding. Designed for
medium-range shots where deflection from
cover could be a factor.
• Non toxic, environmentally sensitive.
• Unequalled straight line performance.
• Deep penetration, totally reliable wound
channel.
• Clean entry wounds to assist bleeding that
will not close over.
• Can be used in most nitro double, and
magazine rifles.
• Poly tip (PT) covering to help aid in
chambering rounds (select calibers noted).
CONVENTIONAL HYDRO-SOLID
POLY TIP
50 per box, unless noted
Part #
8775
8800
8801
8772
8770
8774
8764
8762
8760
M7*
8752
8750
8706
8701
8703
8704
8700
8709
8708
M308A
M308
8705
8707
8685
8680
M303*
8648
8640
8646
8644
M8*
8642
8645
8600
8650
Description / Dia.
6.5mm 140 gr PP SN .264”
6.5mm 160 gr PP SN
6.5mm 160gr RN SN NEW
270 Cal. 130 gr PP SN .277”
270 Cal. 150 gr PP SN
270 Cal. 180 gr SN
7mm 140 gr PP SN .284”
7mm 160 gr PP SN
7mm 175 gr PP SN
7mm 140 gr Hydro-Solid (20) .284”
275 Cal. H&H 160 gr PP .287”
275 Cal. H&H 175 gr PP
30 cal 150 gr PP SN .308”
30 cal 165 gr PP SN
30 cal 180 gr PP SN
30 cal 220 gr RN SN
30 cal 220 gr FMJ
30 cal 240 gr PP SN (.30-06)
30-30 cal 150 gr FN SN
30 Cal. 150 gr Hydro-Solid (20) .308”
30 cal 180 gr Hydro-Solid PT (20 box)
300 Win. Mag 180 gr PP SN
300 Win. Mag 200 gr PP SN
303 cal 174 gr PP SN .312”
303 cal 215 gr RN SN
303 cal 215 gr Hydro-Solid (20) .312”
8x57 I Cal. 200 gr RN SN .318”
8mm 196 gr RN SN .323”
8mm 220 gr RN SN .323”
8mm 250 gr RN SN .323”
8mm 150 gr Hydro-Solid (20) .323”
325 Win. (8mm) 200 gr PP SN
325 Win. (8mm) 220 gr PP SN .323”
318 WR 250 gr RN SN .330”
318 WR 250 gr FMJ
8510
8500
8505
8406
8407
8403
8412
8410
8411
8415
8400
8405
M338
8401
8315
8317
8320
8310
8311
8312
8300
8305
M358*
8319
8220
8210
8207
8215
8200
8203
8205
M93A
M93*
8125
8115
8120
8100
8105
8110
8098
8099
8097
M375A*
M375
7956
7900
7950
7952
7955
7960
M450*
7899
7873
7874
7871
7875
7880
7882
7881
M416
7841
7842
7861
7800
7850
7845
7844
333 Jeffery 250 gr RN SN .333”
333 Jeffery 300 gr RN SN
333 Jeffery 300 gr FMJ
338 Federal 180 gr PP SN 338/06 .338”
338 Federal 200 gr PP SN 338/06
33 Win. 200 gr FN SN .338”
338 Cal. 225 gr PP SN .338”
338 Cal. 250 gr RN SN
338 Cal. 250 gr PP SN
338 Cal. 250 gr FMJ
338 Cal. 300 gr RN SN
338 Cal. 300 gr FMJ
338 Cal. 225 gr Hydro-Solid (20 box)
348 Win Cal. 250 gr FN SN .348”
35 Cal. 225 gr RN SN .358”
35 Cal. 225 PP SN
35 Cal. 225 gr FMJ
35 Cal. 250 gr RN SN
35 Cal. 250 gr PP SN
35 Cal. 275 gr PP SN
35 Cal. 310 gr RN SN
35 Cal. 310 gr FMJ
358 cal 225 gr Hydro-Solid PT (20) .358”
9.3mm 250 gr PP SN .366”
9.3mm 250 gr RN SN
9.3mm 286 gr SN RN
9.3mm 286 gr PP SN
9.3mm 286 gr FMJ
9.3mm 320 gr SN RN
9.3mm 320 gr PP SN
9.3mm 320 gr FMJ
9.3mm 232 gr Hydro-Solid (20) .366”
9.3mm 286 gr Hydro-Solid PT (20) .366”
375 Mag. 235 gr PP SN (.375)
375 Mag. 270 gr RN SN
375 Mag. 270 gr PP SN
375 Mag. 300 gr RN SN
375 Mag. 300 gr PP SN
375 Mag. 300 gr FMJ
375 Mag. 350 gr RN SN
375 Mag. 350 gr PP SN
375 Mag. 350 gr FMJ
375 cal 235 gr Hydro-Solid (20) .375”
375 Cal. 300 gr Hydro-Solid (20 box)
400 Purdey 230 gr RN SN (.405)
450-400 NE 400 gr SN RN (.411)
450-400 NE 400 gr FMJ Ruger (.410)
450-400 NE 400 gr SN RN Ruger (.410)
450-400 NE 400 gr SN (.408)
450-400 NE 400 gr FMJ (.408)
450/400 3” 400 gr Hydro-Solid (10) .410
405 Win. 300 gr SN RN (.412)
416 Rem. 400 gr SN RN (.416)
416 Rem. 400 gr FMJ
416 Rigby 340 gr PP SN
416 Rigby 410 gr SN RN
416 Rigby 410 gr FMJ
416 Rigby 450 gr SN RN
416 Rigby 450 gr FMJ
416 Cal. 400 gr Hydro-Solid (10 box)
10.75x68 347 gr RN SN (.423)
10.75x68 347 gr FMJ
404 Jeffrey 350 gr RN SN (.422)
404 Jeffrey 400 gr SN RN
404 Jeffrey 400 gr FMJ
404 Jeffrey 450 gr RN SN
404 Jeffrey 450 gr FMJ
Toll Free Order Line 1-866-735-6237
BULLETS
M404*
7830
7835
7783
7777
7781
7779
7770
7773
7775
7772
7780
M458A*
M458
7705
M450*
7778
7700
7750
7600
7650
M465
7500
7550
M470
7490
7495
7460
7470
7475
7480
7285
7290
7280
7282
M505
7287
7260
7265
7270
7267
7255
7272
7225
7200
7250
M500
7281
7160
7152
7154
7100
7150
M577*
7000
7050
6000
6050
404 Jeffery 400 gr Hydro-Solid (10) .422
425 WR 410 gr RN SN (.435)
425 WR 410 gr FMJ
11.2x72 Schuler 401 gr SN RN (.440)
458 Mag 400 gr PP SN (.458)
458 Mag 480 gr RN SN
458 Mag 480 gr FMJ
458 Mag 500 gr SN RN
458 Mag 500 gr PP SN
458 Mag 500 gr FMJ
458 Mag 550 gr SN RN
458 Mag 550 gr FMJ
458 cal 450 gr Hydro-Solid (10) .458”
458 cal 480 gr Hydro-Solid (10 box)
450 BP EX 350 gr RN SN
(or light load .458)
450 BPE 325 gr Hydro-Solid (10) .458”
45-70 405 gr FN SN
450 Nitro 480 gr SN RN .458”
450 Nitro 480 gr FMJ
465 Nitro 480 gr SN RN .468”
465 Nitro 480 gr FMJ
465 Cal. 480 gr Hydro-Solid (10 box)
470 Nitro 500 gr SN RN .474”
470 Nitro 500 gr FMJ
470 Cal. 500 gr Hydro-Solid (10 box)
476 WR 520 gr SN RN .476”
476 WR 520 gr FMJ
475 #2 NE 480 gr SN RN .483”
475 #2 NE 480 gr FMJ
475 #2 Jeffery 500 gr SN RN .488”
475 #2 Jeffery 500 gr FMJ
505 Gibbs 525 gr SN RN (per 25) .505”
505 Gibbs 525 gr FMJ (per 25)
505 Gibbs 600 gr PP SN (per 25)
505 Gibbs 600 gr FMJ (per 25)
505 Cal. 525 gr Hydro-Solid (10 box)
500 S&W 400 gr FN SN (25) .500”
500 Jeffery 535 gr SN RN (per 25) .510”
500 Jeffery 535 gr PP SN (per 25)
500 Jeffery 535 gr FMJ (per 25)
500 Jeffery 600 gr PP SN (per 25)
500 Jeffery 600 gr FMJ (per 25)
500 BP EX 440 gr SN RN (per 25)
500 Nitro 450 gr RN SN (per 25)
500 Nitro 570 gr SN RN (per 25)
500 Nitro 570 gr FMJ (per 25)
500 Cal. 570 gr Hydro-Solid (10 box)
50 AK / 50-110 W 500 gr FN SN (25) .510”
577 BP EX 650 gr SN RN (25) .585”
577 Nitro 650 gr SN RN (25) .585”
577 Nitro 650 gr FMJ (25) .584”
577 Nitro 750 gr SN RN (25) .585”
577 Nitro 750 gr FMJ (25) .584”
577 cal 750 gr Hydro-Solid (10) .585”
600 Nitro 900 gr SN RN (25) .620”
600 Nitro 900 gr FMJ (per 25)
700 Nitro 1000 gr SN RN (25) .700”
700 Nitro 1000 gr FMJ (per 25)
Woodleigh Bullet Legend
SN = Soft Nose FMJ = Full Metal Jacket
RN = Round Nose PP = Protected Point
w/c = with cannelure HD = Heavy Duty
PT = Poly Tip (Hydro-Solid)
57
< TOC >
BULLETS
si e rr a r ifl e bullets
100 per box unless noted
20 Caliber (.204”)
Part #
1032
1039
Description
32 gr BK Blitz
39 gr BK Blitz
22 Caliber (.223”)
1100
1110
GameKing bullets are designed for
hunting at long range, where an extra
margin of performance can make
the critical difference. GameKing
bullets feature a boat tail design to
bring hunters the ballistic advantage
of match bullets. The streamlined
tapered base greatly reduces drag,
which results in higher retained
velocity, greater striking energy, a
flatter trajectory and less wind drift
than comparable flat base bullets.
MatchKing
For
serious
rifle competition, you’ll
be in
championship
company
with
MatchKing bullets. The hollow point
boat tail design provides that extra
margin of ballistic performance
match shooters need to fire at long
ranges under adverse conditions.
Exacting tolerances assure accuracy.
Pro-Hunter
The
traditional,
flat base design of the Pro-Hunter
has been blended with Sierra’s
accuracy. The custom-tapered ProHunter jacket design helps assure
expansion, weight retention and
penetration for game-stopping, oneshot performance.
Varminter / BliTzKing
Varmint
hunting
places
demands on bullet performance.
Such bullets must be accurate
to hit small targets, lightly
constructed
to
provide
expansion while minimizing
ricochets, and lightweight to
obtain high velocities with flat Varminter BlitzKing
trajectories.
Sports Master handgun bullets
are engineered to provide consistent,
reliable expansion over a wide range
of velocities. Sierra has added a
serrated “Power Jacket” on hollow cavity and
hollow point bullets. On impact, the “Power
Jacket” expands uniformly along the serration
lines for consistent weight retention
and maximum energy transfer.
Tournament Master handgun
bullets are built to satisfy the
performance demands of serious
competitors and recreational marksmen. The
accuracy of these bullets, combined with
unduplicated penetrating power, make them
the bullet of choice for silhouette shooters and
big game hunters worldwide. •
Sierra Bullet Legend
BK = BlitzKing FMJ = Full Metal Jacket FN = Flat Nose
FMJBT = Full Metal Jacket Boat Tail FPJ = Full Profile Jacket
GK = GameKing HP = Hollow Point
HPBT = Hollow Point Boat tail HV = High Velocity
JHC = Jacketed Hollow Cavity JHP = Jacketed Hollow Point
JSP = Jacketed Soft Point MK = MatchKing PT = Pro-Hunter
RN = Round Nose SBT = Spitzer Boatail SM = Sports Master
SMP = Semi-Pointed SPT = Spitzer SSP = Single Shot Pistol
TM = Tournament Master VT = Varminter w/c= with cannelure
58
40 gr VT Hornet (.223”)
45 gr VT Hornet (.223”)
22 Caliber (.224”)
1200
1210
40 gr VT Hornet
45 gr VT Hornet
22 Caliber (.224”) High Velocity
1385
1440
1310
1330
1340
1450
1410
1400
1345
1350
1355
1360
1365
1390
1455
1375
1395
1380
40 gr VT HP
40 gr BK
45 gr VT SPT
50 gr VT SPT
50 gr VT Blitz
50 gr BK
52 gr MK HPBT Match
53 gr MK HP Match
55 gr VT Blitz
55 gr VT SMP
55 gr GK FMJ BT w/c
55 gr VT SPT
55 gr GK SBT BT
55 gr GK HPBT
55 gr BK Blitz
60 gr VT HP
65 gr GK SBT (7”-10” twist)
69 gr MK HPBT Match (7”-10” twist)
6mm / .243 Caliber (.243”)
1502
1500
1505
1507
1510
1515
1520
1530
1535
1540
1560
1570
55 gr BK Blitz
60 gr VT HP
70 gr MK HPBT Match
70 gr BK BT Blitz
75 gr VT HP
80 gr VT Blitz SBT
85 gr VT SPT
85 gr GK HPBT
90 gr GK FMJBT
100 gr PH SPT
100 gr GK SBT
107 gr MK HPBT Match (7”-8” twist)
.25 Caliber (.257”)
1600
1610
1615
1620
1625
1628
1630
1640
1650
75 gr VT HP
87 gr VT SPT
90 gr GK HP BT
100 gr PH SPT
100 gr GK SBT
100 gr MK HPBT Match
117 gr GK SBT
117 gr PH SPT
120 gr GK HPBT
6.5mm / .264 Caliber (.264”)
1700
85 gr VT HP
1710
100 gr VT HP
1715
107 gr MK HPBT Match
1720
120 gr PH SPT
1725
120 gr MK HPBT Match
1728
130gr GK HPBT NEW
1730
140 gr GK SBT
1740
140 gr MK HPBT Match
1742
142 gr MK HPBT Match
(+) Non-stocking item, subject to availability.
w/c = with cannelure
Toll Free Order Line 1-866-735-6237
HUNTINGTON DIE SPECIALTIES - 2014
270 Caliber (.277”)
1800
1810
1820
1830
1833
1835
1845
1840
90 gr VT HP
100 gr PH SPT
130 gr GK SBT
130 gr PH SPT
135 gr MK HPBT Match
140 gr GK HPBT
140 gr GK SBT
150 gr GK SBT
7mm / .284 Caliber (.284”)
1895
1900
1903
1905
1910
1912
1913
1915
1920
1925
1930
1940
100 gr VT HP
120 gr PH SPT
130 gr MK HPBT Match
140 gr GK SBT
140 gr PH SPT
140gr GK HPBT NEW
150 gr GK SBT
150 gr MK HPBT Match
160 gr GK SBT
160 gr GK HPBT
168 gr MK HPBT Match
175 gr GK SBT
30 Caliber (.308”)
2020
2000
2010
125 gr PH HP FN wc (30-30)
150 gr PH FN wc (30-30)
170 gr PH FN wc (30-30)
30 Caliber / 7.62mm (.308”)
2100
2105
2110
2120
2115
2130
2125
2190
2135
2155
2145
2140
2200
2275
2150
2160
2220
2210
2165
110 gr PH RN
110 gr PH FMJ
110gr HP
125 gr PH SPT
150 gr GK FMJBT w/c
150 gr PH SPT
150 gr GK SBT
150 gr MK HPBT Match
150 gr PH RN wc
155 gr MK HPBT Match
165 gr GK SBT
165 gr GK HPBT
168 gr MK HPBT Match
175 gr MK HPBT Match
180 gr PH SPT
180 gr GK SBT
180 gr MK HPBT Match
190 gr MK HPBT Match
200 gr GK SBT
303 Caliber / 7.7mm (.311”)
2300
2310
150 gr SPT
180 gr SPT
8mm (.323”)
2410
175 gr SPT
338 Caliber (.338”)
2610
2600
2650
9300
215 gr GK SBT (per 50)
250 gr GK SBT (per 50)
250 gr MK HP BT Match (per 50)
300gr HP BT Match (50)
35 Caliber (.358”)
2800
2850
200 gr PH RN w/c (per 50)
225 gr GK SBT (per 50)
375 Caliber (.375”)
2900
2950
3000
200 gr PH FN w/c (per 50)
250 gr GK SBT (per 50)
300 gr GK SBT (per 50)
45 Caliber / .45-70 (.458”)
8900
300 gr PH HP FN wc (per 50)
(+) Non-stocking item, subject to availability.
continued on page 59 >>
HUNTINGTON DIE SPECIALTIES - 2014
< TOC >
si e r ra pis to l bulle ts
barne s bu lle t s
100 per box, unless noted
90 gr SM JHP
95 gr TM FMJ
115 gr SM JHP
115 gr TM FMJ
125 gr TM FMJ
125 gr SM JHP
38 Caliber (.357”)
8300
8310
8320
8325
8360
8340
110 gr SM JHP Blitz wc
125 gr SM JSP w/c
125 gr SM JHP w/c
140 gr SM JHP w/c
158 gr SM JHC w/c
158 gr SM JSP w/c
40 Caliber / 10mm (.400”)
8425
8430
8445
8460
135 gr SM JHP
150 gr SM JHP
165 gr SM JHP
180 gr SM JHP
41 Caliber (.410”)
8500
8520
170 gr SM JHC w/c
210 gr SM JHC w/c
44 Caliber (.4295”)
8600
8620
8605
8610
8630
180 gr SM JHC w/c
210 gr SM JHC wc
220 gr TM FPJ Match w/c
240 gr SM JHC w/c
300 gr SM JSP w/c (per 50)
45 Caliber (.4515”)
8800
8810
8815
8805
8820
8830
185 gr SM JHP
185 gr TM FPJ Match
230 gr TM FMJ Match
230 gr SM JHP
240 gr SM JHC w/c
300 gr SM JSP w/c (per 50)
50 Caliber (.500”)
5350
350 gr SM JHP w/c (per 50)
5400
400 gr SM JSP w/c (per 50)
(+) Non-stocking item, subject to availability.
w/c = with cannelure
barne s o ri g i n a l
50 per box except where noted
9mm (.355”)
8100
8105
8110
8115
8120
8125
BULLETS
348 Win. (.348”) BARNES ORIGINALS This was the
bullet that started it all. Produced by
pressure-forming pure copper tubing
around a pure lead core, this was the
first custom bullet available
to American handloaders.
Introduced in 1939, it was
long the favorite of professional hunters. On impact,
Barnes’s Original bullets typically expand to
more than 200 percent of their original diameter
and retain 70 to 90 percent of their original
weight.
TRIPLE-SHOCK TSX The TSX has become Barnes’ most popular hunting
bullet and gained recognition as one of
the deadliest, dependable bullets.
These all-copper bullets have
the added benefits of lower
fouling, accuracy, greater velocity and lower pressure.
TIPPED TRIPLE-SHOCK TSX B a r n e s
has improved the design by adding a
streamlined polymer tip. The new Tipped
TSX features the same 100-percent
copper body with multiple rings cut into
the shank. It delivers the same accuracy
and performance- but with an added
polymer tip for ballistic coefficiency
and long-range ballistics. The
tip and a re-engineered nose
cavity provide even faster
expansion. 100% lead-free,
Grooved for lower pressures,
Higher ballistic coefficient, 99-100% weight
retention.
VARMINT GRENADE Based on a
design Barnes developed for military applications, the hollow-cavity,
flat-base bullet features
a copper-tin composite core surrounded by
a guilding-metal jacket.
This accurate bullet remains intact at ultra-high
velocities, while its core fragments explosively
on impact, vaporizing even at long range. Expending its energy early, the Varmint Grenade
seldom exits large predators, leaving valuable
pelts virtually undamaged.
Barnes Bullets has changed their numbering
system. HDS has included the NEW / OLD
part numbers for your convenience.
Part #
Description
30437 / 34805
348 220gr FN FB wc
30438 / 34810
348 250gr FN FB wc
38-55 (.377”) 30498 / 385520
38-55 255gr FN FB wc .377”
50-110 Caliber (.510”) 30682 / 5011010 50-110 300gr FN FB wc (20)
30583 / 5011020 50-110 450gr FN FB wc (20)
t ri p le - sho ck x
50 per box, except where noted
22 Caliber (.224”)
Part #
Description
30176 / 22441 45 gr TSX Flat Base
30174 / 22440 50 gr TSX Flat Base
30180 / 22443 53 gr TSX Flat Base (1:12” twist)
30182 / 22444 55 gr TSX Flat Base (1:12” twist)
30190 / 22460 62 gr TSX Boat tail (1:9” or faster)
30193 / 22470 70 gr TSX Boat tail (1:8” or faster)
6mm - (.243”) 30212 / 24341 85 gr TSX Flat Base
25 Caliber (.257”)
30222 / 25742 100 gr TSX Boat tail
30224 / 25743 115 gr TSX Flat Base (1:9” or faster)
6.5mm - (.264”)
30244 / 26441 120 gr TSX Boat tail
30246 / 26442 130 gr TSX Flat Base
6.8mm - (.277”)
30254 / 27732 85 gr TSX FB
30260 / 27738 110 gr TSX Boat tail
270 Caliber (.277”)
30264 / 27742 130 gr TSX Boat tail
30266 / 27744 140 gr TSX Boat tail
30269 / 27746 150 gr TSX Flat Base (1:9.5” twist)
7mm - (.284”)
30287 / 28442
30289 / 28444
30293 / 28447
30291 / 28446
30294 / 28448
120 gr TSX Boat tail
140 gr TSX Boat tail
150 gr TSX Boat tail
160 gr TSX Flat Base
175 gr TSX Flat Base (1:9” twist)
30 Caliber (.308”)
30334 / 30820
30341 / 30835
30345 / 30838
30347 / 30841
30349 / 30843
30351 / 30844
30353 / 30846
30356 / 30848
150 gr TSX FN FB (.30-30 Win)
110 gr TSX FB
130 gr TSX Boat tail
150 gr TSX Boat tail
165 gr TSX Boat tail
168 gr TSX Boat tail
180 gr TSX Boat tail
200 gr TSX Flat Base (1:10” or faster)
7.62mm (.310”)
30391 / 31012 123 gr TSX Boat Tail (7.62x39)
303 Caliber (.311”)
30393 / 31115 150 gr TSX Flat Base (.303 / 7.65mm)
BArnes rifle bullets continued
Toll Free Order Line 1-866-735-6237
59
BULLETS
t ripl e-s h ock x
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
t i p p e d TSx
varm i nt g re na d e
continued from page 59
50 per box
100 per box
8mm - (.323”)
22 Caliber (.224”)
20 Caliber (.204”)
Part #
Description
30396 / 32306 180 gr TSX Boat tail
30398 / 32320 200 gr TSX Boat tail
338 Caliber (.338”)
30408 / 33843
30410 / 33845
30412 / 33846
30415 / 33848
30417 / 33850
185 gr TSX Boat tail
210 gr TSX Boat tail
225 gr TSX Flat Base
250 gr TSX Flat Base
338 Lapua 258gr TSX Boat tail (1:10”)
35 Caliber (.358”)
30455 / 35820 200 gr TSX Flat Base
30457 / 35824 225 gr TSX Flat Base
9.3mm - (.366”)
30469 / 36625 250 gr TSX Flat Base
30473 / 36628 286 gr TSX Flat Base
375 Caliber (.375”)
30486 / 37552
30489 / 37556
30491 / 37558
30494 / 37560
235 gr TSX Flat Base
270 gr TSX Flat Base
300 gr TSX Flat Base
350 gr TSX Flat Base
405 Win. (.411”)
30516 / 41130 300 gr TSX Flat Base
416 Caliber (.416”)
30527 / 41683 300 gr TSX Flat Base
30529 / 41686 350 gr TSX Flat Base
30532 / 41689 400 gr TSX Flat Base
404 Jeffery (.422”) 30537 / 42340 400 gr TSX Flat Base
458 Caliber (.458”) 30615 / 45814
30617 / 45816
30619 / 45819
30622 / 45821
300 gr TSX Flat Base (50 per box)
350 gr TSX Flat Base (50 per box)
450 gr TSX Flat Base (50 per box)
500 gr TSX Flat Base (50 per box)
Part #
Description
30185 / 22452 50 gr Tipped TSX FB (1:12” twist)
30187 / 22453 55 gr Tipped TSX Boat Tail (1:9”)
30188 / 22454 62 gr Tipped TSX Boat Tail (1:8”)
6mm - (.243”)
30208 / 24338 80 gr Tipped TSX Boat tail
25 Caliber (.257”)
30218 / 25731 80 gr Tipped TSX Boat tail
30220 / 25734 100 gr Tipped TSX Boat tail
6.5mm - (.264”)
30240 / 26428 100 gr Tipped TSX Boat tail
30242 / 26430 120 gr Tipped TSX Boat tail
6.8mm - (.277”)
7mm - (.284”)
30296 / 28470
30298 / 28472
30300 / 28474
30303 / 28476
110 gr Tipped TSX FB 120 gr Tipped TSX Boat tail
140 gr Tipped TSX Boat tail
150 gr Tipped TSX Boat tail
30 Caliber - (.308”)
30362 / 30871
30364 / 30873
30366 / 30875
30368 / 30877
30370 / 30878
30372 / 30879
110 gr Tipped TSX FB
130 gr Tipped TSX Boat tail
150 gr Tipped TSX Boat tail
165 gr Tipped TSX Boat tail
168 gr Tipped TSX Boat tail
180 gr Tipped TSX Boat tail (1:11”)
8mm - (.323”) 30400 / 32362 160 gr Tipped TSX Boat tail
338 Caliber - (.338”)
160 gr Tipped TSX FB
185 gr Tipped TSX Boat tail
210 gr Tipped TSX Boat tail
225 gr Tipped TSX Boat tail
30214 / 24372 62 gr VG Flat Base 1:10” twist (100)
NOTES: __________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
9.3mm - (.366”)
_________________________________
375 Caliber - (.375”) _________________________________
30475 / 36674 250 gr Tipped TSX Boat tail
Barnes Bullet Legend
30484 / 37542 250 gr Tipped TSX Boat tail
BND SLD FB = Banded Soild Base
BND SLD RN = Banded Soild Round Nose
BND SPIT BT = Banded Spitzer Solid Boattail
BSTR FN FB = Buster Flat Nose / Flat Base
FNSP = Flat Nose Soft Point
MRX BT = Maximum Range X Boattail
MPG FB = Multi-Purpose Green Flat Base
MZ FB = Muzzleloader Flat Base
SPTF BT = Spit-Fire MZ Boattail
T-EZ FB = Spit-Fire Tipped EX Flat Base
TMZ BT = Spit-Fire Tipped MZ Boattail
TSX FB = Tripple-Shock X Flat Base
TSX FN = Tripe-Shock X Flat Nose
TSX BT = Triple-Shock X Boattail
TTSX BT - Tipped Triple-Shock X Boattail
TTSX FB = Tipped Triple-Shock X Flat Base
VG FB = Varmint Grenade Flat Base
XPB = X-Pistol Bullet
w/c = with cannelure
30519 / 41623 350 gr Tipped TSX Boat tail
60
6mm - (.243”) 30459 / 35830 35 cal 180 gr Tipped TSX FB
30461 / 35832 200 gr Tipped TSX Boat tail
500 Nitro (.509”) 30692 / 50958 570 gr TSX Flat Base (50 per box)
30171 / 22436 36 gr VG Flat Base (100)
30198 / 22486 50 gr VG Flat Base (5.56) 1:10” (100)
_________________________________
30274 / 27772 110 gr Tipped TSX Boat tail
30276 / 27775 130 gr Tipped TSX Boat tail
35 Caliber - (.358”)
30688 / 50553 525 gr TSX Flat Base (50 per box)
22 Caliber (.224”)
270 Caliber - (.277”)
470 Nitro (.474”) 505 Gibbs (.505”) 30170 / 22430 30 gr VG Flat Base Hornet (100)
_________________________________
30629 / 45841 250 gr TSX FB (50 per box)
30630 / 45843 300 gr TSX FB (50 per box)
30647 / 47452 500 gr TSX Flat Base (50 per box)
22 Hornet (.224”)
30271 / 27751 95 gr Tipped TSX Boat tail
30424 / 33873
30426 / 33874
30428 / 33876
30430 / 33879
45-70 (.458”) Part #
Description
30090 / 20426 26 gr VG Flat Base (100)
416 Caliber - (.416”) _________________________________
_________________________________
_________________________________
Barnes Bullets has changed their numbering
system. HDS has included the NEW / OLD
part numbers for your convenience.
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
These are Bullets Only Not Ammunition.
------------------------Shipping charges on
bullets are charged by
actual weight.
p is t o l bu lle t s
r ifl e bul lets
This is not ammunition - 100 & 500 bags only.
This is not ammunition - 100 & 500 bags only.
Part #
Description
22956A 22 Cal-45 gr HP
22956C 22 Cal-45 gr HP
22958A 22 Cal-50 gr PSP
22958C 22 Cal-50 gr PSP 22972A 22 Cal-50 gr PLHP
22972C 22 Cal-50 gr PLHP
22962A 22 Cal-55 gr MC
22962C 22 Cal-55 gr MC
22960A 22 Cal-55 gr PSP
22960C 22 Cal-55 gr PSP
22974A 22 Cal-55 gr PLHP
22974C 22 Cal-55 gr PLHP
22968A 22 Cal-62 gr HP Match
22968C 22 Cal-62 gr HP Match
22932A 243 / 6mm-80gr PLHP
22932C 243 / 6mm-80gr PLHP
22930A 243 / 6mm-80gr PSP
22930C 243 / 6mm-80gr PSP
22778A 30 Cal-150 gr MC
22778C 30 Cal-150 gr MC
22814A 303 Cal-180 gr SPCL
22814C 303 Cal-180 gr SPCL
22984A 8mm - 185 gr PSPCL
22984C 8mm - 185 gr PSPCL
22992A 45-70 300 gr HP
22992C 45-70 300 gr HP
r i f le bul l et s -
Part #
23547A*
23547C*
23553A
23553C
23545A
23545C
23549A*
23549C*
23551A
23551C
23566A*
23566C*
23568A*
23568C*
23570A
23570C
23572A
23572C
23574A
23574C
23580A
23580C
23584A*
23584C*
23586A
23586C
23582A
23582C
23663A
23663C
23665A
23665C
23667A
23667C
23605A*
23605C*
23607A
23607C
23609A
23609C
Quantity
100
500
100
500
100
500
100
500
100
500
100
500
100
500
100
500
100
500
100
500
100
500
100
500
100
500
bulk
This is not ammunition Bulk only - 1000 & 2000 boxes only.
Part #
22951
22957
23610
23624
22965
23630
22775
23590
23595
22883
22899
23654
Description
Quantity
22 Cal-50 gr PLHP
2000
22 Cal-50 gr PSP w/o Cann. 2000
22 Cal-55 gr PSP
2000
22 Cal-55 gr MC
2000
243 Cal-100 gr PSPCL (6mm) 2000
30 Cal-110 gr MC
2000
30 Cal-150 gr SPCL
2000
30 Cal-150 gr PSPCL
2000
30 Cal-165 gr PSPCL
2000
44-40-200 gr SP
1000
45-70-405 gr SP
1000
45-70-300 gr JHP
1000
These are Bullets Only - Not
Ammunition.
Due to the volatile global
metals market,
pricing on bullets and cases
are subject to change
without notice.
For current pricing call
1-866-RELOADS .
Description
Quantity
9mm Cal- 115 gr MC
100
9mm Cal- 115 gr MC
500
9mm Cal- 115 FNEB 100
9mm Cal- 115 FNEB 500
9mm Cal- 115 gr JHP 100
9mm Cal- 115 gr JHP
500
9mm Cal- 124 gr MC
100
9mm Cal- 124 gr MC
500
9mm Cal- 147 gr JHP
100
9mm Cal- 147 gr JHP
500
380 ACP - 95 gr MC
100
380 ACP - 95 gr MC
500
38 ACP - 130 gr MC
100
38 ACP - 130 gr MC
500
38 / 357 Cal-110 gr SJ HP
100
38 / 357 Cal-110 gr SJ HP
500
38 / 357 Cal-125 gr SJ HP
100
38 / 357 Cal-125 gr SJ HP
500
38 / 357 Cal-158 gr SJ HP
100
38 / 357 Cal-158 gr SJ HP
500
40 / 10mm Cal-155 gr JHP
100
40 / 10mm Cal-155 gr JHP
500
40 / 10mm Cal-180 gr MC
100
40 / 10mm Cal-180 gr MC
500
40 / 10mm Cal-180 gr FNEB
100
40 / 10mm Cal-180 gr FNEB
500
40 / 10mm Cal-180 gr JHP
100
40 / 10mm Cal-180 gr JHP
500
41 Cal- 200 SJ HP 100
41 Cal- 200 SJ HP 500
44 Cal- 210 gr SJ HP
100
44 Cal- 210 gr SJ HP
500
44 Cal- 240 gr SJ HP
100
44 Cal- 240 gr SJ HP
500
45 Cal- 230 gr MC
100
45 Cal- 230 gr MC
500
45 Cal- 230 gr FNEB
100
45 Cal- 230 gr FNEB
500
45 Cal- 230 gr JHP
100
45 Cal- 230 gr JHP
500
BULLETS
p i st o l b u lle t s - b u l k
This is not ammunition - 1000 & 2000 boxes.
Part #
22817*
23554
23556*
23934
23558*
23538
23936
23552
23932
23642
22847
23560
22857
23940
23562
23634
23682
23942
23684
23944
23616
23658
23664
23592
22891
23946
23604*
23948
22897
Description
Quantity
32 CaI-71 gr MC
2000
9mm -115 gr JHP
2000
9mm -115 gr MC BFB
2000
9mm -124 gr Golden Saber BJHP
2000
9mm -124 gr MC
2000
9mm -147 gr JHP
2000
9mm -147 gr Golden Saber BJHP 2000
38 / 357 Cal-125 gr SJHP
2000
357 Cal-125 gr Golden Saber BJHP 2000
38 / 357 CaI-140 gr SJHP
2000
38 / 357 Cal-158 gr SP
2000
38 / 357 Cal-158 gr HP
2000
38 / 357 Cal-158 gr LD SWC 2000
38 Cal-125 gr Golden Saber BJHP 2000
38 Cal-148 gr LD WC HB
2000
38 Cal-158 gr LD SWC
2000
40 Cal-155 gr JHP
1000
40 Cal-165 gr Saber BJHP
1000
40 Cal-180 gr JHP
1000
40 Cal-180 gr Saber BJHP
1000
41 Cal-200 gr SJ HP
1000
44 Cal-180 gr SJ HP
2000
44 Cal-210 gr SJ HP
1000
44 Cal-240 gr HP
1000
45 ACP CaI-185 gr MCWC
2000
45 ACP CaI-185 gr Saber BJHP 2000
45 ACP CaI-230 gr MC 1000
45 ACP CaI-230 gr Saber BJHP 1000
45 COLT CaI-250 gr LD (.455”) 1000
Shipping charges on bullets
are charged by actual weight.
NOTES: __________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
Remington Bullet Descriptions
BFB = Beveled Flat Base
BJHP = Bronze Jacketed Hollow Point
FNEB = Flat Nose Encapsulated Base
BP = Bronze Point
BT = Boat Tail
GC = Gas Check
GS = Golden Saber
JHP = Jacketed Hollow Point
LD = Lead
MC = Metal Cased
PLHP = Power-Lokt Hollow Point PSP = Pointed Soft Point
PSPCL = Pointed Soft Point Core-Lokt RN = Round Nose
SJHP = Semi-jacketed Hollow Point SP = Soft Point
SPCL = Soft Point Core-Lokt
SJSP = Semi-Jacketed Soft Point SWC = Semi-Wadcutter
TEMC = Totally Encapsulated Metal Cased
WC = Wadcutter w/c = With Cannelure
Toll Free Order Line 1-866-735-6237
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
61
< TOC >
BULLETS
Shipping charges on bullets
are charged by actual weight.
nambu 8mm p lat e d bu lle t s
_________________________________
-------------------------------cus to m bullets
RIFLE JACKETED SOFT NOSE BULLETS
50 per box except where noted
Part #
DK225
DK226
DK265
DK319
DK320
DK318
DK351
DK3855
DK401
Description
22 HP - (.228”) 60 gr SPIT
22 HP - (.228”) 70 gr SPIT
280 Ross - (.287”) 150 gr SP
8x57 - (.318”) 150 gr SPIT
8x57 - (.318”) 175 gr SPIT
8x57 - (.318”) 200 gr SPIT
351 WSL - (.351”) 180 gr RN
38-55 - (.379”) 250 gr JSP
401 WSL - (.406”) 200 gr
graf jacketed bullets
100 per pack unless noted
Part #
GH268
GH735
GH330
GH308
Description
6.5 Carcano .268” 160 gr RN SP
7.35 Carcano .300” 123 gr SP
8x56R Hung. .330” 206 gr FMJ BT
30 Mauser, 30 Luger 86 gr RN SN
s peer / cci
Empty
Shotshell
Capsules
Part #
8780
8782
8785
Description
38 / 357 Empty Shot Capsules (per 50)
44 Cal Empty Shot Capsules (per 25)
45 Colt Empty Shot Capsules (per 25)
*Use your brass cases.
Plastic
Cases and
Bullets
Part #
8510
8515
8520
8525
8530
Description
Target - 38 Bullets (per 50)
Target - 38 Cases (per 50)
Target - 44 Bullets (per 50)
Target - 44 Cases (per 50)
Target - 45 Bullets ACP* (per 50)
Primers only, do not use smokeless powder.
(*) Use your brass cases.
International orders are acceptable on these items.
62
HUNTINGTON DIE SPECIALTIES - 2014
NOTES: __________________________
TOTAL COPPER
PLATED
(Packs of 100 & 500)
Part #
6640A
6640B
Description
8mm Nambu – 100 gr TJ .320” (100)
8mm Nambu – 100 gr TJ .320” (500)
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
NOTES: __________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
_________________________________
Toll Free Order Line 1-866-735-6237
HUNTINGTON DIE SPECIALTIES - 2014
< TOC >
NOTES: ____________________________________________
NOTES: ____________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
Toll Free Order Line 1-866-735-6237
63
CASES
b e rtra m RIF LE case s
Rifle Cases 20 per box
Part #
Description
B110
222 RIMMED =F
B114
5.6x33R ROOK =F
B203
5.6 Von Hofe Rimmed (5.6x61R) =F
B141
240 BELTED =F
B120
25-20 SINGLE SHOT =F
B123
25-21 STEVENS *
B122
25-25 STEVENS *
B121
28-30 STEVENS *
B143
6.5x53R
B301
6.5x58R SAUER =F
B194
7mm RIGBY Thick =F
B307
7mm H&H Thin =F
B305
7x72R =*
B306
280 FLANGED =F
B135
300 SHERWOOD*
B137
300 ROOK*
B132
30 Super Flanged =F
B130
310 CADET =F
B197
318 WR =F
B136
32 IDEAL *
B138
32 WSL *
B205
8x64 BRENNEKE =F
B202
8x58R DANISH =F
B155
33 Win =F
B334
333 WCF Rimless Nitro =F
B335
333 FLANGED JEFFERY =F
B150
35 WCF =F
B151
350 RIGBY =F
B148
351 WSL =*
B154
360 NITRO 2-1/4” =F
B244
360 #2 =F
B191
375 RIMLESS 2-1/4” =F
B256
9.5x47R =F
B190
375 FLANGED 2-1/2” =F
B156
38-56 =F
B157
38-72 WCF =F
B241
400 N.E. 3 =F
B311
400-350 =F
B179
40-70 SS (original Sharps) =F
B186
40-72 WCF *
B188
40-82 Win. -F
B170
40-90 3-1/4” (original Sharps) *
B192
401 WSL
B161
405 Win. Basic 3-1/4” *
B257
10.3x65R BAENZIGER *
B260
10.75x65R Collath BAR =*
B253
10.75x68
B165
425 WR
B261
43 Egyptian =F
B262
43 BEAUMONT =F
B251
43 SPANISH =F
B252
11mm Mauser / 43 Mauser =F
B253
11.15x58 WERNDEL =F
B254
11.2x72 SCHULER =F
B177
45-60 WCF =F
B178
45-75 WCF =*
B318
450 #2 =F
B312
475 NE #2 3-1/2” =F
B321
500 NE 3-1/4”
B325
500-465 =F
B415
50-95 WCF =F
B323
50 Sharps Basic 3-1/4” *
B403
577 Snider =F
B404
577-450 Martini Henry =F NEW
B420
585 NYATI *
B450
12.7x44 *
B408
600 NE (10 pack)
specify 600 NE (each)
specify 700 NE (each)
64
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
be rtram PISTOL case s
starli ne cas es
(*) = Unformed Cases (F) = Formed Cases
The Bertram Bullet Company manufacture a
range of rare and obsolete solid-head drawn
cartridge cases from virgin brass. Available in
formed or unformed cases as noted.
- non-basic cases head stamped
- accept standard boxer primers
Pistol Cases
20 per box
Part #
Description
B200
7.5 Swedish Nagant =F
B210
7.62 Russian Nagant =*
B212
7.65 Mas Pistol =*
(*) = Unformed Cases (F) = Formed Cases
ja m i so n case s
Jamison’s reputation for
manufacturing quality brass
cartridge
cases
began
in 1966 to fill a need for
a short–run producer of
custom and obsolete brass
cartridge cases. Jamison
International forms brass cartridge cases for
many modern, obsolete, and specialty calibers.
They use top quality cartridge brass with
precision machinery to produce strong, reliable
cases. •
20 per pack
Part #
Description
J25
25-20 SS (Single Shot)
J65
256 Newton
J30N
30 Newton
J375F 375 NE Flanged Mag *
J9364 9.3x64 Brenneke
J416R 416 Remington
J4502 450 NE #2 (20) NEW
J3000 450 NE 3-1/4” *
J450R 450 Rigby *
J516
500-416 NE *
J1500 505 Gibbs Mag
J5575 577 Snider
* Not all these cases may be in stock. Subject
to stock on hand. Before ordering, call for
availability.
Subject To Stock On Hand.
Before Ordering, Call or Email
For Availability.
1-866-RELOADS
[email protected]
Toll Free Order Line 1-866-735-6237
Starline Brass. Whether you shoot a lot or a little, you can save money and enjoy a great hobby by reloading & handloading brass. It all starts
with durable, quality made brass cases made to
use again and again to save you money. •
50 per pack unless noted
Part #
Description
300
30 Mauser
762
7.62x25 TOK
320
32 H&R Mag
355
9mm Largo
363
9mm Makarov (9x18)
350
9x21
380
38 Short Colt
381
38 Long Colt
384
38 S&W
400
400 CorBon
456
40-65 (per 20)
420
41 Long Colt
440
44 S&W Russian
444
44 Auto Mag
445
445 Super Mag
457
45-70 (per 20)
459
45-90 (per 20)
454
454 CASULL
450
45 S&W Schofield
452
45 Win. Mag
460
460 S&W
500
50 AE
517
50-110 WCF (per 20)
510
500 S&W
515
50 Alaskan (per 20)
520
50-70 (per 20)
525
50-90 SS (per 20)
530
56-50 Spencer (per 20)
535
500 Linebaugh
g raf case s
100 per pack.
Part #
Description
GH22
22 Hornet NEW
GH40
6.5 Japanese Arisaka (6.5x51R)
GH10
6.5x52 Carcano
GH12
6.5x54 M-S
GH73
7.35x51 Carcano
GH15
7.5x54 French MAS
GH20
7.5x55 Swiss
GH33
7.62x39
GH30
7.62x54R Russian
GH25
7.65x53 Argentine
GH50
7.7 Japanese Arisaka (7.7x58)
GH55
7.92x33 Kurtz
GH65
8x50R Lebel French (Rifle)
GH70
8x56R Hungarian
GH60
8x60S
PPU Prvi Partizan,
GH338 338 Lapua Mag
made in Serbia
GH75
9.3x62 Mauser
(since 1928).
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
n orma c ase s
Norma products are known worldwide for high
quality ensuring a long life and many reloads.
Norma cases are made of the best raw materials
with the narrowest tolerances, for accuracy.
The case neck is annealed to become softer.
This prevents gas leaks and enables the case
to hold the bullet firmly for at least 10 years
without cracking as a result of aging material.
Further down on the case body, the hardness
increases to avoid unnecessary stretching. If it
is too hard, it would bring the risk of cracks.
Furthest down, around the primer pocket, the
brass hardness is nearly twice that of around
the neck. •
100 per pack unless noted
Centerfire Unprimed Rifle Brass
Part #
Description
25510A 204 Ruger
25604A 22 Savage HP (5.6x52R)
25731A 22-250
25710A 22 PPC NEW
25701A 220 Swift
25721A 223 Remington
26001A 243 Winchester
26010A 6mm PPC
26015A 6mm Norma BR (small primer pocket)
26411A 25-06
26528A 6.5mm-284 Win. (Norma)
26545A 6.5x54 M-S
26511A 6.5 Creedmoor NEW
26511A 6.5 Grendel NEW
26551A 6.5x55 Swedish Mauser
26802B 264 Win. Mag (50) NEW
26907B 270 WSM (50 pack)
26901A 270 Winchester
27006N 275 Rigby (20)
27050A 280 Remington
27001A 7x57 (7mm Mauser)
27004A 7x57R
27011N 7X61 S&H, 7x61 Super (per 20)
27012A 7x64
27018A 7.65R
27021A 7mm Remington Mag
27022A 7mm-08
27025B 7mm Rem. Ultra Mag NEW
27640A 30-06 Springfield
27561B 300 Norma Mag (50 pack)
27506A 300 AAC Blackout (100) NEW
27653B 300 H&H (50 pack)
27666B 300 Win. Mag (50 pack)
27676B 300 Win. Short Mag (50)
27686B 300 Rem. Ultra Mag NEW
27611B 300 SAUM (50 pack)
27730N 303 Savage (per 20)
27623A 308 Winchester (100)
27637B 308 Norma Mag (50 pack)
28001B 8x57 JS (8mm Mauser) (50 pack)
28014B 8x57 Rimmed JRS (50 pack)
28100N 8x68 S (per 20)
28511B 338-06 A-Square (50 pack)
28504B 338 Win. Mag (50 pack)
28507N 338 Lapua Mag (per 20)
28520B 338 Norma Mag (50 pack)
29001A
29002B
29301B
29311B
29322B
29321B
29501B
29515N
21043N 21070N
21060N
21069N
21067N
21123N
21125N
21140N
21157N 21155N
21163N
21300N
21315N
21310N
1126
358 Norma Mag
35 Whelen (50 pack)
9.3x57 (50 pack)
9.3x62 (50 pack)
9.3x72R (50 pack)
9.3x74R (50 pack)
375 H&H (50 pack)
375 Flanged Mag (20 pack)
404 Jeffery (per 20)
500/416 NE (20 pack)
416 Rigby (per 20)
416 Remington Mag (20 pack)
416 Taylor (20 pack)
45 Sharps Basic Case 2.88” OAL (20)
45-120 SS 3-1/4” (per 20)
450 Rigby (20 pack)
458 Lott (per 20)
458 Winchester (per 20)
470 NE Cases (per 20)
500 NE (20 pack)
500 Jeffery (20 pack)
505 Gibbs (20 pack)
Norma Reloading Manual 2 NEW (page 18)
norma weatherby cases
50 per pack unless noted
Part #
25740B
26020B
26502B
26912B
27032B
27660B
27677N
28511B
28516N 28602B
29513B
29512N 21065N
21160N Description
224 WBY Mag (50 pack)
240 WBY Mag (50 pack)
257 WBY Mag (50 pack)
270 WBY Mag (50 pack)
7mm WBY Mag (50 pack)
300 WBY Mag (50 pack)
30-378 WBY Mag (per 20)
338-06 Wby A-Square (50)
338-378 WBY Mag (per 20)
340 WBY Mag (50 pack)
375 Wby Mag (50) NEW
378 WBY Mag (per 20)
416 WBY Mag (per 20)
460 WBY Mag (per 20)
lap u a case s
CASES
wi nche st e r ca s es
Winchester shellcases for handguns and rifles
are engineered to precise tolerances to ensure
smooth-feeding and positive chambering.
Winchester carries unprimed rifle and handgun
shellcases. •
50 per pack, unless noted
Part #
Description
U218A
218 BEE (100)
U223WSSMB 223 WSSM (50)
U225B
225 Winchester (50)
U243WSSMB 243 WSSM (50)
U25WSSMB 25 WSSM (50)
U2535B
25-35 WCF (50)
U250SB
250 Savage (50)
U264B
264 Win (50)
U270WSMB 270 Win. Short Mag (50)
U284B
284 Win. (50)
U7WSMB
7mm Win. Short Mag (50)
U30LA
30 Luger (100)
U300SB
300 Savage (50)
U300WSMB 300 Win. Short Mag (50)
U307B
307 Winchester (50)
U32SCA
32 Short Colt (100)
U32SWSA
32 S&W Short (100)
U3240B
32-40 Winchester (50)
U32WSB
32 Win. Special (50)
U325WSMB 325 Win. Short Mag (50)
U348B
348 Winchester (50)
U356B
356 Winchester (50)
U358B
358 Winchester (50)
U3840B
38-40 WCF (50)
U3855B
38-55 WCF (50)
U375WB
375 Win. (50)
U923
9x23 Cases (100)
U4570B
45-70 US Govt. (50)
U10MMA
10mm (100)
8 mm nam bu ca s es
Huntington
Die Specialties
100 per pack
Part #
Description
LU220R 220 Russian
LU225 22-250
LU222 222 Rem. Match
LU223 223 Rem. Match
LU243 243 Winchester
LU6BR 6mm BR Norma
LU656 6.5mm Grendel
LU65
6.5mm-284 Win. (Norma)
LU47
6.5x47 Lapua
LU66
6.5x55 Swedish Mauser
LU260 260 Rem.
LU3006 30-06 Springfield
LU308 308 Winchester
LU308P 308 Win. Palma (sm. primer pocket)
LU7623 7.62x39
LU762 7.62x53R Russian
LU338L 338 Lapua
LU93
9.3x62
Toll Free Order Line 1-866-735-6237
Part #
200
200A
200B
Description
8mm Nambu (50)
8mm Nambu (500)
8mm Nambu (1000)
m ag t e ch cas es
Part #
1224
1230
1235
1240
1241
1226
Description
12 ga Brass Case (25) for LP Primers
16 ga Brass Case (25) for LP Primers
20 ga Brass Case (25) for LP Primers
24 ga Brass Case
410 Brass Case (25) for LP Primers
50 BMG Case (1 each)
65
< TOC >
CASES
HUNTINGTON DIE SPECIALTIES - 2014
7x57 (7mm Mauser)
23071A 100 Pack
23071B 250 Pack
23071C 500 Pack
re m i n gton r ifle case s
Remington reloading cases are the same quality
brass as used in their ammunition. Available in
100, 250 and 500 bag bulk quantities. These
are unprimed brass. This is not ammunition. •
Bulk Only
17 Rem. Fireball
Part #
23067A
23067B
23067C
Description
100 Pack
250 Pack
500 Pack
17 Remington
23065A 100 Pack
23065B 250 Pack
23065C 500 Pack
204 Ruger
23213A 100 Pack
23213B 250 Pack
23213C 500 Pack
22 Hornet
23005A 100 Pack
23005B 250 Pack
23005C 500 Pack
220 Swift
23006A 100 Pack
23006B 250 Pack
23006C 500 Pack
222 Remington
23017A 100 Pack
23017B 250 Pack
23017C 500 Pack
222 Rem. Mag
23003A 100 Pack
23003B 250 Pack
23003C 500 Pack
223 Remington
23089A 100 Pack
23089B 250 Pack
23089C 500 Pack
22-250
23273A 100 Pack
23273B 250 Pack
23273C 500 Pack
6mm Remington
23093A 100 Pack
23093B 250 Pack
23093C 500 Pack
6mm Remington BR
23382A 100 Pack
23382B 250 Pack
23382C 500 Pack
243 Winchester
23001A 100 Pack
23001B 250 Pack
23001C 500 Pack
66
7mm Rem. Ultra Mag
25-06
22999A 100 Pack
22999B 250 Pack
22999C 500 Pack
25-20 WCF
23019A 100 Pack
23019B 250 Pack
23019C 500 Pack
257 Roberts
23025A 100 Pack
23025B 250 Pack
23025C 500 Pack
6.5x55Swedish Mauser
23056A 100 Pack
23056B 250 Pack
23056C 500 Pack
6.5mm Rem. Mag
23281A 100 Pack NEW
23281B 250 Pack NEW
23281C 500 Pack NEW
260 Remington
22458A 100 Pack
22458B 250 Pack
22458C 500 Pack
6.8mm Rem. SPC
23290A 100 Pack
23290B 250 Pack
23290C 500 Pack
270 Winchester
23045A 100 Pack
23045B 250 Pack
23045C 500 Pack
270 Win. Short Mag
23048A 100 Pack
23048B 250 Pack
23048C 500 Pack
280 Remington
23029A 100 Pack
23029B 250 Pack
23029C 500 Pack
7mm-08 Remington
23097A 100 Pack
23097B 250 Pack
23097C 500 Pack
7mm BR Remington
22485A 100 Pack
22485B 250 Pack
22485C 500 Pack
7mm Rem. Mag
22487A 100 Pack
22487B 250 Pack
22487C 500 Pack
7mm Rem. SAUM
22846A 100 Pack
22846B 250 Pack
22846C 500 Pack
7mm STW
22460A 100 Pack
22460B 250 Pack
22460C 500 Pack
Toll Free Order Line 1-866-735-6237
22572A 100 Pack
22572B 250 Pack
22572C 500 Pack
30 Carbine
23268A 100 Pack
23268B 250 Pack
23268C 500 Pack
30 Rem. AR
23040A 100 Pack
23040B 250 Pack
23040C 500 Pack
30-30 WCF
23021A 100 Pack
23021B 250 Pack
23021C 500 Pack
30-40 Krag
23037A 100 Pack
23037B 250 Pack
23037C 500 Pack
30-06 Springfield
23049A 100 Pack
23049B 250 Pack
23049C 500 Pack
300 WSM
23250A 100 Pack
23250B 250 Pack
23250C 500 Pack
300 Win. Mag
23261A 100 Pack
23261B 250 Pack
23261C 500 Pack
300 Rem. SAUM
22844A 100 Pack
22844B 250 Pack
22844C 500 Pack
300 Weatherby Mag
22478A 100 Pack
22478B 250 Pack
22478C 500 Pack
300 Rem. Ultra Mag
22850A 100 Pack
22850B 250 Pack
22850C 500 Pack
300 AAC Blackout
23148A 100 Pack NEW
23148B 250 Pack NEW
23148C 500 Pack NEW
303 British
23043A 100 Pack
23043B 250 Pack 23043C 500 Pack
308 Winchester
23057A 100 Pack
23057B 250 Pack
23057C 500 Pack
8x57 (8mm Mauser)
23075A 100 Pack
23075B 250 Pack
23075C 500 Pack
remington RIFLE cases continued
HUNTINGTON DIE SPECIALTIES - 2014
< TOC >
remington rifle cases
remington rifle cases - nickel continued
8mm Rem. Mag
23099A 100 Pack
23099B 250 Pack
23099C 500 Pack
32-20 WCF
23053A 100 Pack
23053B 250 Pack
23053C 500 Pack
338 Win. Mag
23282A 100 Pack
23282B 250 Pack
23282C 500 Pack
338 Rem. Ultra Mag
22852A 100 Pack
22852B 250 Pack
22852C 500 Pack
350 Rem. Mag
23284A 100 Pack
23284B 250 Pack
23284C 500 Pack
35 Whelen
22483A 100 Pack
22483B 250 Pack
22483C 500 Pack
375 H&H Mag
23100A 100 Pack 23100B 250 Pack
23100C 500 Pack
375 Rem. Ultra Mag
23102A 100 Pack
23102B 250 Pack
23102C 500 Pack
444 Marlin
23269A 100 Pack
23269B 250 Pack
23269C 500 Pack
44-40 WCF
22490A 100 Pack
22490B 250 Pack
22490C 500 Pack
45-70 Govt.
22489A 100 Pack
22489B 250 Pack
22489C 500 Pack
ni c kel r ifl e cases
This is not ammunition. Bulk Only
17 Remington - nickel
22554A 100 Pack NEW
22554B 250 Pack NEW
22554C 500 Pack NEW
22 Hornet - nickel
22532A 100 Pack
22532B 250 Pack
22532C 500 Pack
223 Remington - nickel
22536A 100 Pack
22536B 250 Pack
22536C 500 Pack
22-250 - nickel
22538A 100 Pack
22538B 250 Pack
22538C 500 Pack
243 Winchester - nickel
22540A 100 Pack
22540B 250 Pack
22540C 500 Pack
25-06 - nickel
22566A 100 Pack
22566B 250 Pack
22566C 500 Pack
270 Winchester - nickel
22542A 100 Pack
22542B 250 Pack
22542C 500 Pack
7mm Rem. Mag - nickel
22544A 100 Pack NEW
22544B 250 Pack NEW
22544C 500 Pack NEW
30 Carbine - nickel
22578A 100 Pack
22578B 250 Pack
22578C 500 Pack
30-30 WCF - nickel
22580A 100 Pack
22580B 250 Pack
22580C 500 Pack
30-06 Springfield - nickel
22546A 100 Pack
22546B 250 Pack
22546C 500 Pack
300 Win. Mag - nickel
22584A 100 Pack
22584B 250 Pack
22584C 500 Pack
300 Weatherby Mag - nickel
22588A 100 Pack NEW
22588B 250 Pack NEW
22588C 500 Pack NEW
308 Winchester - nickel
22548A 100 Pack
22548B 250 Pack
22548C 500 Pack
32-20 WCF - nickel
22550A 100 Pack
22550B 250 Pack
22550C 500 Pack
338 Win. Mag - nickel
22594A 100 Pack
22594B 250 Pack
22594C 500 Pack
444 Marlin - nickel
22603A 100 Pack
22603B 250 Pack
22603C 500 Pack
45-70 Govt. - nickel 22552A 100 Pack
22552B 250 Pack
22552C 500 Pack
CASES
remington pistol cases
This is not ammunition. Bulk Only
22 Remington Jet
Part #
23253A
23253B
23253C
Description
100 Pack
250 Pack
500 Pack
221 Remington Fireball
23007A 100 Pack
23007B 250 Pack
23007C 500 Pack
32 S&W Long
23211A 100 Pack
23211B 250 Pack
23211C 500 Pack
32 ACP
22484A 100 Pack
22484B 250 Pack
22484C 500 Pack
357 Mag
23263A 100 Pack
23263B 250 Pack
23263C 500 Pack
357 Rem. Maximum
23095A 100 Pack
23095B 250 Pack
23095C 500 Pack
9mm Luger
23249A 100 Pack
23249B 250 Pack
23249C 500 Pack
9mm Luger +P
23255A 100 Pack
23255B 250 Pack
23255C 500 Pack
380 ACP
23233A 100 Pack
23233B 250 Pack
23233C 500 Pack
38 Super Auto +P (38 ACP)
23260A 100 Pack
23260B 250 Pack
23260C 500 Pack
38 Special
23259A 100 Pack
23259B 250 Pack
23259C 500 Pack
40 S&W
22512A 100 Pack
22512B 250 Pack
22512C 500 Pack
41 Mag
23298A 100 Pack
23298B 250 Pack
23298C 500 Pack
44 Rem. Mag
23286A 100 Pack
23286B 250 Pack
23286C 500 Pack
remington pistol cases continued
remington rifle cases - nickel continued
Toll Free Order Line 1-866-735-6237
67
CASES
remington pistol cases
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
r ws case s
ho rnady cas es
remington pistol cases continued
44 S&W Special
22492A 100 Pack
22492B 250 Pack
22492C 500 Pack
45 Colt
22494A 100 Pack
22494B 250 Pack
22494C 500 Pack
45 ACP
23288A 100 Pack
23288B 250 Pack
23288C 500 Pack
45 Auto Rim
22496A 100 Pack
22496B 250 Pack
22496C 500 Pack
ni c kel pis tol cases
This is not ammunition. Bulk Only
357 Mag - nickel
Part #
Description
22482A 100 Pack
22482B 250 Pack
22482C 500 Pack
44 Rem. Mag - nickel
22597A 100 Pack
22597B 250 Pack
22597C 500 Pack
45 ACP +P - nickel
22611A 100 Pack
22611B 250 Pack
22611C 500 Pack
45 Colt - nickel
22607A 100 Pack
22607B 250 Pack
22607C 500 Pack
horn eber cases
20 per pack
Part #
Description
11120 7x66 VH
11122 7x72R
11154 8x57-R360 (small flash hole)
11160 9x56 M-S
11162 9x57
11163 9x57R
11170 9.5x57 M-S
11190 10.75x68
11254 476 W.R. NE
11256 505 Gibbs
German Quality at its finest
RWS Brass has been the choice of handloaders
for the past 30 years. Known for its extremely
high reloadability, RWS cases are made to the
exacting specifications that are demanded by
Special Ops teams, Law Enforcement agencies
and military specialists world wide. RWS
cases are the favorite of Bench Rest Shooters
and hunters who will accept only the finest
components for their shooting needs. All RWS
cases are fire hardened after each of the three
drawing stages followed by a final hardening
of the throat in the finishing production stage.
Excessive head space and excessive pressure
tests are performed before any lot is released
by Quality Control.
CALL FOR PRICE
AND AVAILABILITY
20 per pack
Part #
Description
4468
22 Hornet
4506
222 Remington NEW
4522
223 Remington NEW
4557
22 Hipower / 5.6x52R
4719
243 Winchester NEW
4603
5.6x50
4581
5.6x50R Mag
4573
5.6x57
4646
6.5x55
4638
6.5x57
4654
6.5x57R
4662
6.5x65 RWS
4697
6.5x65R NEW
4697
6.5x68R
4484
7x57 NEW
4492
7x57R
4808
7x64
4832
7x65R
4875
7mm Rem Mag NEW
4794
30 R Blazer
4433
.30-06 Sprg.
4751
308 Win.
4778
300 Win. Mag
4948
8x57 JS
4980
8x57 JRS
5006
8x60S
5030
8x68S
5049
8.15x46R
5081
9.3x62
5103
9.3x64
5111
9.3x72R NEW
5146
9.3x74R
5162
375 H&H
7737
50 BMG case (each) NEW
b e ll case s
20 per pack
Part #
Description
1087
375 Cylindrical* (2.825” OAL)
68
Toll Free Order Line 1-866-735-6237
Hornady Brass Case Features:
Tight Wall Concentricity Concentricity helps
to ensure proper bullet seating in both the
case and the chamber of your firearm. Higher
concentricity also aids in a uniform release of
the bullet on firing, for optimal velocity and
accuracy.
Uniform Case Wall Thickness Benchrest
shooters have long known that uniform case
wall thickness is vital to accuracy. Hornady
manufactures their cases to extremely tight
tolerances to ensure this critical element is as
consistent as possible.
More Reloads per Case Hornady brass is
considered the foundation for an accurate
cartridge, not a commodity. Because they
take greater care in its creation you’ll get more
reloads from Hornady brass.
Consistent Weight and Capacity Every single
Hornady case, regardless of the lot in which
it was produced, is virtually identical to other
Hornady cases in the same caliber. For you,
this means consistent pressures, velocity and
accuracy- every time.
Rifle Cases
Part #
8611
8662
86721
86751
8721
8684
87263
8726
8673
8690
86932
8691
8687
86871
8693
86934
86931
86936
8697
86937
86938
8798
(50 per pack, unless noted)
Description
17 Hornet Hornady NEW
308 Marlin Express
300 RCM
300 AAC Blackout (50) NEW
338 Marlin
338 Lapua Mag (per 20)
9.3x62
9.3x74R (per 20)
375 Ruger
376 Steyr
404 Jeffery (per 20)
405 Winchester
416 Rigby (per 20)
416 Ruger (50)
450 Marlin (50)
450-400 3” 400 (20)
450-400 3-1/4” NE (20)
450 NE (per 20)
458 Lott (50)
470 NE (per 20)
500 NE (per 20)
H&H Belted Mag Basic (50)
single bullets & cases
Part #
Description
600 Nitro Express - Bullet
700 Nitro Express - Bullet
600 Nitro Express - Case
700 Nitro Express - Case
HUNTINGTON DIE SPECIALTIES - 2014
< TOC >
REFERENCE SECTION
REFERENCE SECTION
FORSTER REFERENCE
RCBS - DIE REFERENCE
RIFLE BULLET MOULDS
RCBS - LIL DANDY CHART
PISTOL BULLET MOULDS
RCBS - GROUP A
RCBS - X-DIES
SILHOUETTE MOULDS
RCBS - GROUP B
RCBS - SAFARI DIES
NORTH / SOUTH SKIRMISH
RCBS - GROUP C
RCBS - LEGACY DIES
COWBOY BULLET MOULDS
RCBS - GROUP D
RCBS - COWBOY CAS DIES
ROUND BALL MOULDS
RCBS - GROUP E
RCBS - COMPETITION DIES
LIMITED PROD. MOULDS
Toll Free Order Line 1-866-735-6237
69
< TOC >
REFERENCE SECTION
fors ter - case trimm e rs
Ordering Chart for “Original” Case Trimmer
NeckNeck
Bullet Trim Collet ReamerReamer
Cartridges
Dia. Pilot # Order # Order # Dia.
17 Rem. (requires 17 cal. cutter shaft)..................................................... .171” CT1017CT2001 NR1017 .1730
22 Hornet, 22 K Hornet-if .224 bullet is reloaded see next line................ .223” CT102- 2 or 3 NR1223 .2255
222 Rem., 222 Rem. Mag., 22 Varm., 223 Rem., 225 Win., 5.6x50R...... .224” CT1022CT2001 NR1224 .2265
22 250, 220 Swift, 221 Fireball, 22 PPC, 22 B.R. Rem............................ .224” CT1022CT2001 NR1224 .2265
218 Bee & Mashburn, 219 Zipper and Wasp, 22 Sav., 22-30-30............. .224” CT1022CT2002 NR1224 .2265
228 Krag, 22 Jet C.F. Magnum, 224 Varm. Weatherby, 22 PPC.............. .224” CT1022CT2003 NR1224 .2265
243 Win., 6mm, 6mm mag & Belted Exp., 244 Rem., 6mm B.R. Rem.... .243” CT1024CT2001 NR1243 .2455
6mm PPC................................................................................................. .243” CT1024CT2003 NR1243 .2455
6mm Krag and 6mm Krag Long............................................................... .243” CT1024CT2003 NR1243 .2455
257, 250 Sav. & Ackley, 250-3000, 25 Souper, 25-06.............................. .257” CT1025CT2001 NR1257 .2595
25-20 Repeater, 25-35, 25 Rem............................................................... .257” CT1025CT2002 NR1257 .2595
25 Krag Imp., 256 Win.............................................................................. .257” CT1025CT2003 NR1257 .2595
6.5x57 Mau., 6.5mm Win., 6.5 Jap Mau., 6.5x55 Swede & SKAN........... .264” CT1026CT2001 NR1263 .2665
6.5x257 Jap, 256 Newton, 260 A.A.R., 264 Win. Mag............................. .264” CT1026CT2001 NR1263 .2665
270 Win., Sav., Gibbs, Weatherby & Ackley, 257 H & H........................... .277” CT1027CT2001 NR1277 .2795
7mm, 7x57 Mau., 7mm Weatherby, 7x64, 276, 7mm-08, 7mm TCU....... .284” CT1028CT2001 NR1284 .2865
280 Rem., 284 Win., 7mm Rem. Mag., 7mm B.R. Rem........................... .284” CT1028CT2001 NR1284 .2865
30-06, 308 Win., 300 Mag., 7.62 NATO, 300 Savage.............................. .308” CT1030CT2001 NR1308 .3110
30-30, 30 Rem., 30 WCF, 303 Savage, 7.5x55 Swiss.............................. .308” CT1030CT2002 NR1308 .3110
30-40 Krag, 30 Carbine, 30-40 Imp., 7.62x39.......................................... .308” CT1030CT2003 NR1308 .3110
303 British, 32 S&W Long, 7.65 Mau., 7.7mm Jap.....................................311” CT1031CT2001 NR1311 .3135
32-20..........................................................................................................311” CT1031CT2002 NR1311 .3135
8x57, JS & RS, 8x60, 7.92x57, 8mm-06, 8mm Mauser........................... .323” CT1032CT2001 NR1323 .3255
32 Win. Spec., 32 Rem., 32-40................................................................ .323” CT1032CT2002 NR1323 .3255
333 Win., 333 OKH, 33 Ackley................................................................. .333” CT1033CT2001
-
33 Win...................................................................................................... .338” CT103-*CT2004
-
338 Win., 338 Win. Mag., 338 Gibbs, 340 Weatherby Mag..................... .338” CT103-CT2001 NR1338 .3405
348 Win.................................................................................................... .348” CT1034*CT2004
-
35 Rem., 358 Win., 358 Norma Mag.....................................................357”,.358”CT1035 CT2001 NR1358 .3605
38 Colt Super.........................................................................................357”,.358”CT1035 CT2002 NR1358 .3605
38 Spec., 357 Magnum, 35 Win............................................................357”,.358”CT1035 CT2003 NR1358 .3605
9mm Luger (needs extra short base)....................................................355”,.356”CT1351 CT2002 NR1355 .3575
380 Auto (needs extra short base)........................................................... .356” CT1351CT2001
-
9.3mmx74R, 9.3mmx62........................................................................... .365” CT1368CT2001
-
375 Mag., 375-06, 375 Barnes, Weatherby & Ackley, 375 H&H.............. .375” CT1375CT2001 NR1375 .3780
38-50, 378 Weatherby.............................................................................. .375” CT1375*CT2004 NR1375 .3780
375 Winchester......................................................................................... .376” CT1375CT2002 NR1375 .3780
41 Colt, 401 Win., 38-40, 395-400, 41 S&W............................................ .400” CT1400CT2001 NR1400 .4025
10mm Auto Pistol, 40 S&W...................................................................... .400” CT1400CT2003 NR1400 .4025
41 Rem., Mag........................................................................................... .410” CT1410CT2002 NR1410 .4125
416 Weatherby, 416 Rigby....................................................................... .416” CT1416*CT2004
-
44 S&W Spec., 44 Rem. Mag., 44-40, 444 Marlin Mag............................ .429” CT1432 CT2001 NR1432 .4340
45 ACP, 45 Auto Rim., 45 Win. Magnum.................................................. .452” CT1452 CT2001 NR1452 .4545
45-90........................................................................................................ .454” CT1452*CT2004
-
45 Long Colt.................................................................452” (Pre-WWII).454”
CT1455 1 or 2
-
45-70........................................................................................................ .457” CT1458*CT2004
-
450 Watts, 458 Win., 450 Ackley Mag...................................................... .459” CT1458CT2001 NR1458 .4605
All Ultra Mag Short Action Ultra Mag. Short Mag. - #3 Collet
* #4 COLLET USAGE: Use of the #4 Collet requires that the Original
Case Trimmer Collet housing opening be enlarged to .610. This will not
affect the use of the 1, 2 or 3 collet. This can be opened at the factory
upon request at no charge. Note: RETURN HOUSING ONLY-do not
send entire Case Trimmer.
Original Case Trimmer Collet Step Dimensions
Collet #1 (CT2001).379, .473, .532
Collet #2 (CT2002).350, .418, .506
Collet #3 (CT2003).356, .440, .545
Collet #4 (CT2004) one step .605
Classic Case Trimmer Collet Step
Collet Number
#5 (CT2005)
#6 (CT2006)
#7 (CT2007)
#8 (CT2008)
A Dimension
0.840
0.545
—
—
B Dimension
0.675
0.660
0.640
0.610
Special case trimmer pilots can be ordered direct from Forster Products.
Allow three (3) days for special pilot. Any special size can be ordered.
Special rim holding collets can also be special ordered. An additional
machining fee will be charged.
70
REF.
HUNTINGTON DIE SPECIALTIES - 2014
Collets and Pilots for “Classic 50” Case Trimmer
Classic Cartridge - Metric
Collet # Pilot #
7.62x54......................................................................................................... CT2005CT1030
7.7x60 R....................................................................................................... CT2008CT1030
9.5x47 R (needs 5 3/8” C.T. base)................................................................ CT2005CT1375
9.5x60 R Turkish Mauser.............................................................................. CT2005
Special pilot
9.5x73 Miller Greiss Mag.............................................................................. CT2006CT1375
10.25x69 R................................................................................................... CT2007CT1405
10.3x60 R Swiss........................................................................................... CT2007CT1416
11mm German Service Revolver (needs 5-3/8” C.T. base).......................... CT2006CT1422
11mm Beaumont M/71................................................................................. CT2005CT1458
11mm Belgian Albini..................................................................................... CT2005CT1432
11mm Belgian Comblain............................................................................... CT2005CT1432
11mm Murats................................................................................................ CT2007CT1432
Classic Cartridge - Collet # Pilot #
.275 Magnum Flanged.................................................................................. CT2005CT1028
.280 Nitro Express Rimmed Flanged............................................................ CT2008
Special pilot
.280 Halger Mag........................................................................................... CT2005CT1028
.280 Jeffery................................................................................................... CT2006
Special pilot
.280 Ross HDS Cyl....................................................................................... CT2005
Special pilot
.30 Holland Super 30 Magnum Flanged....................................................... CT2005CT1030
.303 Magnum................................................................................................ CT2005CT1031
.33 Winchester.............................................................................................. CT2008CT103.333 Jeffery Flanged..................................................................................... CT2007CT1033
.333 Rimmed Jeffery Flanged...................................................................... CT2007CT1033
.35 Newton................................................................................................... CT2006CT1035
.35 Winchester.............................................................................................. CT2006CT1035
.360 Nitro Express #2................................................................................... CT2007CT1368
.369 Nitro Express Purdey............................................................................ CT2007CT1375
.375 H&H Magnum Flanged......................................................................... CT2005CT1375
.378 Weatherby............................................................................................ CT2005CT1375
.38-56 Winchester........................................................................................ CT2008CT1375
.38-70 Winchester........................................................................................ CT2008CT1375
.38-72 Winchester........................................................................................ CT2006CT1375
.38-90 Winchester Express.......................................................................... CT2005CT1375
.40-50 Sharps Straight..............................................................................Special Collet
CT1400
.40-60 Marlin................................................................................................. CT2008CT1400
.40-60 Winchester (needs 5-3/8” C.T. base)................................................. CT2007CT1405
.40-65 Winchester........................................................................................ CT2008CT1405
.40-70 Sharps Bottle neck............................................................................ CT2008CT1400
.40-70 Winchester........................................................................................ CT2008CT1405
.40-75 Bullard............................................................................................... CT2008CT1410
.40-82 Winchester (.40 - 75)......................................................................... CT2008CT1405
.40-90 Sharps Bottle neck............................................................................ CT2008CT1400
.40-90 Sharps Straight.................................................................................. CT2005CT1400
.404 Jeffery Rimless Nitro Express.............................................................. CT2006CT1422
.405 Winchester 3-1/4”................................................................................. CT2006CT1410
.416 Rigby / 416 Remington......................................................................... CT2005CT1416
.44-100 Sharps............................................................................................. CT2007
Special pilot
.44-40 Winchester (needs 5-3/8” C.T. base)................................................. CT2006CT1432
.44-60 Sharps Rem (needs 5-3/8” C.T. base)............................................... CT2007
Special pilot
.44-70 Maynard 1882................................................................................... CT2008CT1416
.44-77 Sharps Rem...................................................................................... CT2007
Special pilot
.44-90 Sharps (.44-105 Ñ .44 - 100)............................................................. CT2007
Special pilot
.44-95 Peabody............................................................................................ CT2005
Special pilot
.45-100 Ballard............................................................................................. CT2008CT1455
.45-100 Sharps Straight................................................................................ CT2008CT1452
.45-120 Sharps Straight 3-1/4”..................................................................... CT2008CT1452
.45-60 Winchester........................................................................................ CT2007CT1455
.45-70 Government....................................................................................... CT2008CT1458
.45-82 Winchester........................................................................................ CT2008CT1458
.45-90 Winchester........................................................................................ CT2008CT1458
.45 RCBS 3-1/4” (all cases off this base)..................................................... CT2008 Varies w/bullet dia.
.450-400 Mag Nitro Express 3-1/4”.............................................................. CT2007CT1405
.450-400 Nitro Express Birmingham Proof................................................... CT2007CT1410
.450-400 Nitro Express for Black Powder 2-3/8”.......................................... CT2007CT1405
.450 Nitro Express Straight 3-1/4”................................................................ CT2007CT1458
.458 Lott....................................................................................................... CT2006CT1458
.460 Guns & Ammo Mag.............................................................................. CT2006CT1458
.470 Nitro Express........................................................................................ CT2006CT1474
.470 Capstick................................................................................................ CT2006CT1474
.475 #2 Nitro Express 3-1/2”......................................................................... CT2005CT1483
.476 Nitro Express........................................................................................ CT2006CT1474
.50 AE........................................................................................................... CT2006CT1500
.50-115 Bullard............................................................................................. CT2007CT1510
.50-140 Sharps 3-1/4”................................................................................... CT2005CT1510
.50-90 Sharps............................................................................................... CT2005CT1510
.50-95 Winchester Express (needs 5-3/8” C.T. base)................................... CT2007CT1513
.50-70 Government (needs 5-3/8” C.T. base)............................................... CT2005CT1513
.500-.450 Magnum Nitro Express 3-1/4”...................................................... CT2006CT1455
.500-.465 Nitro Express................................................................................ CT2006
Special pilot
.500 Nitro Express 3-1/4”.............................................................................. CT2006 CT1505/ CT1510
.500 Nitro Express 3”.................................................................................... CT2006 CT1505/ CT1510
.505 Gibbs Magnum..................................................................................... CT2007CT1505
Remington - Spanish (all cases off this base).............................................. CT2007 Varies w/bullet dia.
Toll Free Order Line 1-866-735-6237
maximum finger-touch control.
bench-mounted tool with optional Powder Measure Stand.
NOTE: Do NOT use with black powder!
86046 Little Dandy Rotor Knob
$7.95
HUNTINGTON DIE SPECIALTIES - 2014
< TOC >
REF.
$47.95 REFERENCE SECTION
86040 Little Dandy Pistol Powder Measure
Note:
Measure
should bepused
conjunction
with anraccurate
powder
scale
r c bs - ro tor charg e table
fothe
r Powder
li t t le
dandy
i stino
l p o wde
m e as
ure
for setting the original charge and for checking charges occasionally during the run.
Par
t#
Powder
Rotor
$13.95
860
36
860
35
860
01
860
02
860
03
860
04
860
05
860
06
860
07
860
08
860
09
860
10
860
11
860
12
860
13
860
14
860
15
860
16
860
17
860
18
860
19
860
20
860
21
860
22
860
23
860
24
860
25
860
26
little dandy™ rotor Charge table
Rotor No.
Bullseye
00
1.7
0
2.2
01
2.5
02
2.7
03
3.0
04
3.2
05
3.5
06
3.7
07
4.0
08
4.5
09
5.0
10
5.5
11
6.0
12
6.5
13
7.2
14
7.8
15
8.4
16
9.0
17
9.7
18
NR
19
NR
20
NR
21
NR
22
NR
23
NR
24
NR
25
NR
26
NR
231
NR
NR
2.7
3.0
3.3
3.6
3.9
4.2
4.5
5.0
5.6
6.2
6.8
7.2
7.9
8.6
9.3
10.0
10.6
11.3
12.1
NR
NR
NR
NR
NR
NR
NR
HP38
NR
NR
2.8
3.0
3.4
3.6
4.0
4.2
4.5
5.1
5.5
6.2
6.8
7.5
7.9
8.8
9.4
10.3
10.9
11.7
12.3
NR
NR
NR
NR
NR
NR
NR
Red Dot
NR
NR
1.7
1.9
2.2
2.3
2.5
2.6
2.9
3.2
3.6
4.0
4.3
4.7
5.1
5.5
6.0
6.5
6.9
7.4
7.8
8.3
8.7
9.1
NR
NR
NR
NR
700-X
NR
NR
2.0
2.2
2.4
2.6
2.8
3.0
3.2
3.6
4.0
4.4
4.8
5.1
5.7
6.2
6.8
7.3
7.7
8.2
8.7
9.2
NR
NR
NR
NR
NR
NR
Green Dot
NR
NR
1.9
2.1
2.3
2.5
2.8
3.0
3.1
3.5
3.9
4.4
4.8
5.1
5.5
6.1
6.6
7.0
7.5
8.0
8.8
8.9
9.6
10.0
10.5
10.7
11.4
NR
SR4756
NR
NR
NR
NR
NR
NR
NR
3.5
3.7
4.2
4.7
5.1
5.6
6.2
6.8
7.3
7.9
8.5
9.1
9.7
10.3
10.9
11.4
12.0
12.4
13.4
13.9
14.5
HS-5
NR
NR
4.2
4.5
5.0
5.3
5.9
6.2
6.6
7.4
8.2
9.0
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
Unique
NR
NR
2.3
2.5
2.8
3.0
3.3
3.5
3.7
4.2
4.7
5.2
5.7
6.0
6.6
7.2
7.8
8.4
9.0
9.5
10.1
10.7
11.3
11.8
12.4
13.1
NR
NR
SR7625
NR
NR
2.5
2.7
3.0
3.2
3.5
3.8
4.0
4.5
5.0
5.5
6.0
6.5
7.2
7.7
8.3
9.0
9.6
NR
NR
NR
NR
NR
NR
NR
NR
NR
HS-6
NR
NR
NR
NR
NR
NR
5.4
5.7
6.1
6.9
7.6
8.4
9.1
10.1
11.0
12.0
13.0
13.9
14.8
15.7
16.7
NR
NR
NR
NR
NR
NR
NR
HS-7
NR
NR
NR
NR
NR
4.9
5.4
5.7
6.1
6.8
7.5
8.3
9.1
10.1
11.0
11.9
12.9
13.9
14.8
15.8
16.8
17.7
18.6
NR
NR
NR
NR
NR
Herco
NR
NR
NR
NR
NR
NR
3.1
3.3
3.5
4.0
4.4
4.8
5.3
5.7
6.3
6.7
7.3
7.9
8.4
9.0
9.5
10.1
10.5
11.1
11.7
12.3
13.0
13.6
Blue Dot
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
5.9
6.5
7.1
7.7
8.4
9.1
9.8
10.6
11.3
12.0
12.8
13.5
14.2
14.9
15.7
16.6
17.5
18.3
630
NR
NR
NR
NR
5.0
5.3
5.8
6.1
6.5
7.3
8.1
8.9
9.7
10.8
11.7
12.7
13.7
14.8
15.8
16.9
17.9
18.8
19.8
20.8
NR
NR
NR
NR
2400
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
7.0
7.7
8.4
9.3
10.2
11.0
11.9
12.8
13.6
14.6
15.4
16.2
17.0
17.9
18.9
19.8
20.8
21.8
H110
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
8.9
9.7
10.7
11.7
12.6
13.6
14.6
15.6
16.6
17.6
18.5
19.5
20.5
21.5
22.5
23.7
24.8
296
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
9.1
9.9
10.9
11.9
12.9
13.9
14.9
15.9
17.0
18.0
19.0
20.0
21.0
22.1
23.2
24.3
25.5
SR4759
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
10.1
10.7
11.5
12.2
12.8
13.5
14.2
15.0
15.8
16.5
IMR 4227
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
9.1
9.9
10.8
11.6
12.6
13.3
14.3
15.1
16.0
16.8
17.6
18.6
19.5
20.5
21.5
680
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
8.2
9.1
9.9
10.9
11.9
12.9
13.9
14.9
15.9
16.9
17.9
18.9
19.9
20.9
21.9
23.1
24.2
25.3
IMR 4198
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
6.5
7.2
7.9
8.5
9.4
10.2
11.0
12.0
12.7
13.5
14.4
15.2
16.1
16.8
17.8
18.7
19.6
20.4
H322
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
13.0
13.8
14.7
15.7
16.6
17.4
18.3
19.3
20.3
21.3
22.3
Re-7
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
NR
10.4
11.3
12.2
13.2
14.0
14.9
15.9
16.8
17.7
18.5
19.5
20.5
21.6
22.6
Accurate Arms #2
NR
NR
3.1
3.3
3.9
4.2
4.6
4.8
5.1
5.6
6.2
6.8
7.6
8.4
9.4
10.0
10.5
11.2
12.1
12.9
13.9
15.0
16.0
16.5
16.9
18.3
19.0
19.6
Accurate Arms #5
NR
NR
4.0
4.3
4.8
5.1
5.6
5.9
6.3
7.1
7.8
8.6
9.3
10.3
11.3
12.2
13.2
14.2
15.2
16.1
17.1
18.0
18.9
19.8
20.8
21.9
23.0
24.3
Accurate Arms #7
NR
NR
4.2
4.6
5.1
5.4
6.0
6.3
6.6
7.5
8.3
9.1
9.9
11.0
12.0
13.0
14.4
15.0
16.0
17.0
18.0
19.0
20.0
20.9
22.0
23.1
24.3
25.7
Accurate Arms #9
NR
NR
4.2
4.5
5.0
5.3
5.9
6.2
6.6
7.4
8.1
9.0
9.8
10.8
11.9
12.8
13.8
14.9
15.8
16.8
17.8
18.8
19.8
20.7
21.8
22.9
24.1
25.4
Olin 473AA
NR
NR
2.8
3.1
3.4
3.7
4.0
4.2
4.5
5.0
5.5
6.1
6.6
7.4
8.1
8.7
9.3
9.9
10.9
11.4
12.1
12.8
13.3
14.1
15.0
15.5
16.4
17.0
Olin 452AA
NR
NR
2.4
2.5
2.8
3.0
3.2
3.4
3.7
4.1
4.6
5.0
5.5
6.0
6.6
7.3
7.8
8.2
8.8
9.5
10.0
10.4
11.1
11.6
12.3
12.8
13.3
14.2
Olin 540
NR
NR
3.9
4.3
4.7
5.0
5.6
5.9
6.2
7.0
7.7
8.5
9.2
10.2
11.1
12.1
13.0
14.0
14.9
15.9
16.8
17.8
18.9
19.6
20.7
21.7
22.7
23.9
Olin 571
NR
NR
4.1
4.4
4.9
5.2
5.8
6.1
6.5
7.2
8.0
8.8
9.6
10.7
11.8
12.7
13.7
14.7
15.6
16.8
17.7
18.7
19.7
20.5
21.6
22.8
24.0
25.0
Clays
NR
NR
1.8
2.0
2.2
2.3
2.6
2.7
2.9
3.3
3.6
4.0
4.4
4.8
5.3
5.7
6.1
6.6
7.0
7.5
8.0
8.4
8.9
9.2
9.8
10.3
10.8
11.4
Universal Clays
1.7
2.2
2.5
2.8
3.0
3.1
3.3
3.8
4.0
4.5
5.0
5.5
6.0
6.6
7.3
7.9
8.5
9.1
9.8
10.5
10.9
11.7
12.2
12.7
13.4
14.2
15.0
15.7
International Clays
1.4
1.8
2.2
2.3
2.5
2.7
3.0
3.1
3.3
3.8
4.2
4.7
5.1
5.6
6.1
6.5
7.1
7.7
8.2
8.7
9.2
9.6
10.1
10.6
11.1
11.7
12.4
12.9
Tite Group
2.0
2.8
3.2
3.5
4.0
4.1
4.4
4.7
5.2
5.9
6.4
7.1
7.7
8.4
9.2
10.1
10.7
11.6
12.5
13.3
14.1
14.5
15.3
16.2
17.2
17.9
18.6
20.0
Lil’ Gun
NR
NR
4.1
4.6
5.3
5.4
5.7
6.1
6.6
7.4
8.2
9.2
9.9
10.8
11.8
12.9
13.8
14.9
16.0
17.1
18.0
18.7
19.8
20.8
22.1
22.9
23.6
25.7
IMR Trail Boss
NR
NR
NR
NR
NR
1.5
1.7
1.8
1.9
2.1
2.3
2.5
2.8
3.1
3.4
3.7
4.0
4.3
4.6
4.9
5.2
5.5
5.8
6.0
6.4
6.7
7.1
7.5
453
1.8
2.3
2.7
2.9
3.2
3.4
3.7
3.9
4.2
4.7
5.2
5.7
6.2
6.9
7.5
8.1
8.8
9.5
10.1
10.7
11.3
12.0
12.6
13.2
13.9
14.6
15.3
16.1
Royal “D”
1.4
1.8
2.2
2.4
2.7
2.8
3.1
3.3
3.5
3.9
4.3
4.8
5.2
5.8
6.4
6.9
7.4
8.0
8.5
8.9
9.4
10.0
10.5
11.1
11.8
12.3
12.9
13.5
Solo 1500
1.5
2.0
2.4
2.6
2.9
3.1
3.4
3.6
3.8
4.3
4.8
5.3
5.8
6.4
7.0
7.5
8.2
8.8
9.3
9.9
10.6
11.1
11.7
12.4
13.1
13.7
14.3
15.0
N 310
1.5
1.9
2.3
2.4
2.7
2.9
3.2
3.3
3.6
4.0
4.5
4.9
5.3
5.9
6.5
7.0
7.5
8.1
8.6
9.2
9.7
10.2
10.8
11.3
11.9
12.6
13.2
13.8
N 320
1.4
1.9
2.2
2.3
2.6
2.8
3.1
3.2
3.5
3.9
4.3
4.8
5.2
5.8
6.3
6.8
7.4
7.9
8.4
9.0
9.5
10.1
10.7
11.1
11.7
12.3
13.0
13.6
N 330
1.6
2.1
2.5
2.7
3.0
3.2
3.5
3.7
4.0
4.5
5.0
5.5
6.0
6.6
7.2
7.8
8.4
9.0
9.8
10.3
11.0
11.6
12.2
12.8
13.5
14.1
14.8
15.6
N 340
1.7
2.2
2.6
2.8
3.1
3.3
3.6
3.8
4.1
4.6
5.1
5.6
6.2
6.7
7.4
8.0
8.6
9.3
9.9
10.6
11.2
11.8
12.4
13.0
13.7
14.4
15.1
15.9
N 350
1.7
2.3
2.7
2.9
3.3
3.5
3.9
4.1
4.3
4.8
5.4
6.0
6.5
7.1
7.8
8.5
9.1
9.8
10.5
11.1
11.8
12.5
13.3
13.9
14.6
15.4
16.1
16.9
Win. Action Pistol
2.3
3.0
3.5
3.8
4.2
4.5
4.9
5.2
5.5
6.2
6.8
7.5
8.2
9.2
10.0
10.8
11.6
12.5
13.2
14.1
15.0
15.8
16.6
17.4
18.3
19.4
20.2
21.2
IMR PB
NR
NR
2.2
2.4
2.6
2.8
3.1
3.2
3.4
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.2
7.8
8.3
8.8
9.4
10.0
10.5
10.9
11.5
12.0
12.7
13.3
Win. Super Lite
NR
NR
3.2
3.5
3.8
4.0
4.4
4.7
4.9
5.6
6.2
6.8
7.4
8.2
9.0
9.7
10.4
11.2
12.0
12.7
13.7
14.4
15.1
15.5
16.5
17.5
18.6
19.5
Win. Super Target
NR
NR
2.3
2.5
2.8
3.0
3.3
3.4
3.7
4.1
4.5
5.0
5.4
6.0
6.5
7.1
7.7
8.2
8.8
9.3
9.9
10.4
10.9
11.4
12.1
12.6
13.3
14.0
Win. Super Field
NR
NR
3.1
3.4
3.8
4.0
4.4
4.6
4.9
5.5
6.1
6.8
7.3
8.2
9.0
9.7
10.5
11.3
12.1
12.8
13.3
14.2
15.0
15.7
16.4
17.3
18.2
19.3
Power Pistol
2.1
2.7
3.2
3.5
3.8
4.1
4.5
4.7
5.0
5.6
6.2
6.9
7.5
8.3
9.1
9.9
10.6
11.4
12.1
12.9
13.7
14.5
15.2
15.9
16.8
17.7
18.6
19.5
RCBS rev. 2014
WARNING: The powder charge weights shown for individual rotors are to be used for general references only. Lot to lot variations in
WARNING:
the
powder
charge
weights
shown
for
individual
rotors
are
to
be
used
for
general
references
only.
Lot
to
lot
variations
in
powder density, temperature, humidity, operating techniques and manufacturing tolerance all introduce variations in charge weights from the
powder
density,
humidity, operating
techniques
manufacturing
all actual
introduce
variations
in charge
weights
values
listed.
Each temperature,
rotor-powder combination
used MUST
be checkedand
on an
accurate scaletolerance
to determine
charge
weight prior
to loading
from the values
listed.
each
combination
ammunition.
Read and
follow
yourrotor-powder
powder measure
instructions.used MUSt be checked on an accurate scale to determine actual charge
weight prior to loading ammunition. Read and follow your powder measure instructions.
rcbS.com
NOTES: ____________________________________________
NOTES: ____________________________________________
n
___________________________________________________
42
l
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
Toll Free Order Line 1-866-735-6237
71
reference chart
chart
reference
< TOC >
REFERENCE SECTION
reFerenCe
eFerenCe C
Chart
hart
Caliber
Caliber
.17
.17 Hornet
Hornet (Hornady)
(Hornady)
REF.
HUNTINGTON DIE SPECIALTIES - 2014
rr
eFerenCe
Chart
eFerenCe
Chart
Die
Die
Group
Group
Case
Case
Primer
Shell
Case
Case
Primer
ShellHolder
Holder
Lube
Trimmer
Plug
&&Shell
Trimmer Ammo
Ammo Lube
Trimmer Trimmer
Plug& &
Shell
Cal.
Size
Plate
Pilot
Cal. Box
Box
Size DieDie
ColletNo.*
No.* Pilot
SleeveSize
Size Collet
PlateNo.
No. Sleeve
Caliber
Caliber
CaseCase CaseCase
ShellShell
Holder
Primer
Holder Primer
PlugPlug
& & Trimmer
& Shell
Die Die
TrimmerAmmo
Ammo LubeLube
TrimmerTrimmer
& Shell
Pilot Pilot
Cal. Cal.
Box Size
No.* No.*
Size SizeColletCollet
No. No. Sleeve
Group
Box Size Die Die
Sleeve
Group PlatePlate
DD
1212
Small
Small
22
1717
MPMP
––
.280
Ackley
Improved
(Nosler)
.280
Ackley
Improved
(Nosler)
.17
.17 Remington
Remington
AA&&GM
GM
1010
Small
Small
11
1717
SRSR
––
.280
Remington
(7mm
Exp.Exp.
Rem.)
.280
Remington
(7mm
Rem.)A &AGM
& GM
.17
.17 Remington
RemingtonFireball
Fireball
AA&&GM
GM
A,A,GM
GM
&&AR
AR
AA
1010
Small
Small
11
1717
SRSR
––
.284
Winchester
.284
Winchester
A A
1010
Small
Small
11
2020
SRSR
––
7mm
Bench
RestRest
Remington
7mm
Bench
Remington
D &DGM
& GM
11
Small
Small
22
2222
MPMP
––
7mm
Remington
Magnum
7mm
Remington
Magnum
A &AGM
& GM 4/264/26
.204
.204 Ruger
Ruger
.218
.218 Bee
Bee
D D
3 3
Large
Large
1
1
28 28
LR LR
2
2
3 3
Large
Large
1
1
28 28
LR LR
2
2
3 3
Large
Large
1
1
28 28
MR MR
4
4
3 3
Small
Small
1
1
28 28
MR MR
2
2
Large
Large
1
1
28 28
LR LR
4
4
.22
.22 Bench
Bench Rest
Rest
GM
GM
33
Small
Small
33
2222
MRMR
1 1
7mm
Remington
SA SA
Ultra
Magnum
(5) (5)
7mm
Remington
Ultra
MagnumA &AGM
& GM 38/438/4
Large
Large
1
1
28 28
(4) (4)
–
–
.22
.22 PPC
PPC
GM
GM
3232
Small
Small
33
2222
MRMR
1 1
7mm
Remington
Ultra
Magnum
(5) (5)
7mm
Remington
Ultra
Magnum A &AGM
& GM 38/438/4
Large
Large
1
1
28 28
(4) (4)
–
–
.22
.22 Hornet
Hornet
AA&&GM
GM
1212
Small
Small
22
2222
MPMP
––
7mm
Shooting
Times
Westerner
7mm
Shooting
Times
Westerner A &AGM
& GM
4 4
Large
Large
1
1
28 28
LR LR
4
4
.22
.22 K-Hornet
K-Hornet
DD
1212
Small
Small
22
2222
MPMP
––
7mm
Thompson/Center
Ugalde
7mm
Thompson/Center
Ugalde A &AGM
& GM
10 10
Small
Small
1
1
28 28
SR SR
1
1
.22
.22 Remington
RemingtonJet
Jet
DD
66
Small
Small
33
2222
MPMP
––
7mm
Weatherby
Magnum
7mm
Weatherby
Magnum
4 4
Large
Large
1
1
28 28
LR LR
4
4
.22
.22 Savage
Savage High-Power
High-Power
DD
22
Large
Large
22
2222
MRMR
3 3
7mm
Winchester
Short
Magnum
7mm
Winchester
Short
Magnum A &AGM
& GM 43 (5)
43 (5)
Large
Large
1
1
28 28
(4) (4)
–
–
A & GM
A & GM
A & GM
A & GM
A & GM
A & GM
A & GM
A & GM
A
A
A, GM
A,
GM
& AR
& AR
A & GM
A & GM
D
D
D
D
A
A
A & GM
A & GM
A & GM
A & GM
GM
GM
A & GM
A & GM
D & AR
D & AR
A & GM
A & GM
E
E
A & GM
A & GM
A & GM
A & GM
A
A
A
A
A
A
A
A
D
D
A
A
A, GM
& AR
A, GM
&
D AR
3
3
11
11
10
10
10
10
10
10
10
10
43 (5)
43 (5)
6
6
45
45
3
3
43 (5)
43 (5)
3
3
3
3
32
32
10
10
3
3
29 (6)
29 (6)
43 (5)
43 (5)
3
3
1
1
2
2
3
3
3/11
3/11
3/11
3/11
4
4
3
3
32
Large
Large
Large
Large
Small
Small
Small
Small
Small
Small
Small
Small
Large
Large
Small
Small
Small
Small
Large
Large
Large
Large
Large
Large
Small
Small
Small
Small
Small
Small
Large
Large
Small
Small
Large
Large
Large
Large
Small
Small
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
1
MR
MR
MR
MR
SR
SR
SR
SR
SR
SR
SR
SR
(4)
(4)
SR
SR
SR/MP
SR/MP
LR
LR
(4)
(4)
MR
MR
MR
MR
MR
MR
SR
SR
MR
MR
(4)
(4)
(4)
(4)
LR
LR
MP
MP
MR
MR
MR
MR
MR
MR
MR
MR
LR
LR
MR
MR
MR
2
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
Small
Small
Small
Small
Small
Small
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
Small
Small
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
Large
MR
2
7mm-08 Remington
A & GM
3
7mm-08 Remington
A & GM
3
7mm x 57 Mauser (7mm Mauser) A & GM
3/11
7mm x 57 Mauser (7mm Mauser) A & GM
3/11
7mm x 64 Brenneke
A
3
7mm x 64 Brenneke
A
3
7mm x 65 Rimmed
D
26
7mm x 65 Rimmed
D
26
7-30 Waters
A & GM
2
7-30 Waters
A & GM
2
.30 M-1 Carbine
C
17
.30 M-1 Carbine
C
17
.30 Luger (7.65mm Luger)
A
16
.30 Luger (7.65mm Luger)
A
16
.30 Mauser (7.63mm Mauser)
D
16
.30 Mauser (7.63mm Mauser)
D
16
.30 Remington
D
19
.30 Remington
D
19
.30 Remington AR
D & AR
30
.30 Remington AR
D & AR
30
.30 T/C
A
3
.30 T/C
A
3
A, GM & AR
3
.30-06 Springfield
A, GM & AR
3
.30-06 Springfield
.30-30 Winchester
A
2
.30-30 Winchester
A
2
.30-338 Winchester Magnum
D
4
.30-338 Winchester Magnum
D
4
.30-378 Weatherby Magnum
A & GM
14 (5)
.30-378 Weatherby Magnum
A & GM
14 (5)
.30-40 Krag
A
7
.30-40 Krag
A
7
.300 AAC Blackout
D & AR
10
.300 AAC Blackout
D & AR
10
.300 H&H Magnum
D
4
.300 H&H Magnum
D
4
.300 Remington SA Ultra Magnum A & GM
38/4 (5)
.300 Remington SA Ultra Magnum A & GM
38/4 (5)
.300 Remington Ultra Magnum
A & GM
38/4 (5)
.300 Remington Ultra Magnum
A & GM
38/4 (5)
.300 RCM
A
4
.300 RCM
A
4
.300 Savage
A
3
.300 Savage
A
3
.300 Weatherby Magnum
A & GM
4
.300 Weatherby Magnum
A & GM
4
.300 Winchester Magnum
A & GM
4/26
.300 Winchester Magnum
A & GM
4/26
.300 Winchester Short Magnum
A & GM
43 (5)
.300 Winchester Short Magnum
A & GM
43 (5)
.303 British
A
7
.303 British
A
7
.307 Winchester
A
2
28
.264 LBC-AR
.264 Winchester Magnum
D & AR
A
32
4/26
Large
Large
2
(4)
(4)
1
1
1
1
1
1
3
3
3
3
1
1
1
1
(4)
(4)
1
1
1
1
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
24
24
24
24
24
24
24
24
24
24
24
24
24
24
(4)
(4)
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
26
26
26
26
26
MR
LR
4
3
.307 Winchester
.308 Norma Magnum
2
Large
Large
1
.264Remington
Winchester
Magnum
6.5
Magnum
DA
4/26
4/26
Large
Large
11
2626
LRLR
4 4
.308
Norma Magnum
.308
Winchester
3 4
Large
Large
1
1
30 30
MR LR
2
4
6.5 Remington Magnum
6.5mm-06
1
1
30 30
MR MR
2
2
30 30
LR MR
.22-250 Remington (22 Varminter)
.22-250 Remington (22 Varminter)
.220 Swift
.220 Swift
.221 Remington Fireball
.221 Remington Fireball
.222 Remington
.222 Remington
.222 Remington Magnum
.222 Remington Magnum
.223 Remington (5.56mm)
.223 Remington (5.56mm)
.223 Winchester Super Short Mag
.223 Winchester Super Short Mag
5.6mm x 50 Rimmed
5.6mm x 50 Rimmed
5.7mm x 28 (FN)
5.7mm x 28 (FN)
.240 Weatherby Magnum
.240 Weatherby Magnum
.243 Winchester Super Short Mag
.243 Winchester Super Short Mag
.243 Winchester
.243 Winchester
6mm Bench Rest
6mm Bench Rest
6mm PPC
6mm PPC
6mm x 45
6mm x 45
6mm Remington (244 Remington)
6mm Remington (244 Remington)
.25 Auto (25 ACP)
.25 Auto (25 ACP)
.25 Winchester Super Short Mag
.25 Winchester Super Short Mag
.25-06
.25-06
.25-20 Winchester
.25-20 Winchester
.25-35 Winchester
.25-35 Winchester
.250 Savage (250-3000 Savage)
.250 Savage (250-3000 Savage)
.257 Roberts
.257 Roberts
.257 Roberts Improved 40°
.257 Roberts Improved 40°
.257 Weatherby Magnum
.257 Weatherby Magnum
.260 Remington
.260 Remington
.264 LBC-AR
1
1
1
1
1
1
1
1
1
1
1
1
1
2
3
1
1
1
1
–
–
–
2
2
2
1
1
1
2
–
–
2
–
3
2
2
2
4
2
3
2
3
1
1
1
1
–
–
–
2
2
2
1
1
1
2
–
–
2
–
3
2
2
2
4
A A
D
A
D
A, GM & AR
4
1
1
1
1
2
3
2
2
2
2
1
1
2
1
4
3
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
2
3
2
2
2
2
1
1
2
1
4
3
1
1
1
1
1
1
1
1
1
1
2
28
28
28
28
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
31
30
30
28
28
28
28
28
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
31
30
LR
LR
LR
MR
MP
(4)
(4)
MR
MR
MR
LR
MR
LR
(4)
LR
SR
LR
(4)
(4)
MR
MR
LR
LR
(4)
LR
MR
LR
MR
LR
LR
LR
MR
MP
(4)
(4)
MR
MR
MR
LR
MR
LR
(4)
LR
SR
LR
(4)
(4)
MR
MR
LR
LR
(4)
LR
MR
2
2
2
2
3
–
–
–
3
3
2
2
3
4
–
–
1
4
–
–
2
2
4
4
–
–
2
4
2
2
2
2
3
–
–
–
3
3
2
2
3
4
–
–
1
4
–
–
2
2
4
4
–
–
2
DD
4/26
3
Large
Large
11
2626
LRLR
2 4
.308
Winchester
.308
Marlin
Express
A,A GM & AR
2 3
Large
Large
6.5mm-06
6.5-284
Winchester
D & DGM
33
Large
Large
11
2626
LRLR
4 2
.308 xMarlin
Express
7.5mm
54 French
MAS
D A
2 2
Large
Large
1
1
2
2
6.5-284
Winchester
6.5
Creedmoor
GM
DD&&AR
33
Large
Large
11
2626
LRLR
4 4
7.5mm
French MAS
7.5mm
x 55x 54
Schmidt-Rubin
A D
2 2
Large
Large
2
1
30 30
LR LR
–
2
6.5 Creedmoor
6.5mm
x 47 Lapua
AR
DD&&GM
33
Large
Large
11
2626
MRLR
3 4
7.5mmx x39-.308/.311
55 Schmidt-Rubin
7.62mm
A & ARA
32 2
Large
Large
3
2
30/31 30
MR LR
3
–
D D& GM
93
Large
Large
11
2626
LRMR
- 3
7.62mm
x 39-.308/.311
7.62mm
x 54R
Russian
AA & AR 13 (5)32
Large
Large
4
3
30 30/31 LR MR
–
3
29
Large
Large
11
2626
LRLR
2 -
7.62mm
Russian
7.65mm
x 53x 54R
Belgian
Mauser
A A
Large
Large
1
4
31 30
LR LR
2
–
A D& GM
32
Large
Large
11
2626
LRLR
2 2
7.65mm
53 Belgian
Mauser
7.7mm
x 58xJapanese
Arisaka
A A
3/2 3
Large
Large
1
1
31 31
LR LR
2
2
6.5mm xx 68S
57 Mauser
6.5mm
DD
3
34 (5)
Large
Large
(2)
21
2626
LRLR
42
x 58(7.65mm
JapaneseAuto)
Arisaka
.327.7mm
Automatic
B A
17 3/2
Large
Small
1
1
31 31
(4) LR
–
2
6.5mm
x 68S SPC
6.8
Remington
A & DAR
22
2726
MRLR
3 4
Automatic
.32.32
H&R
Magnum(7.65mm Auto)
E B
23 17
Small
Small
1
1
31 31
(4) (4)
–
–
6.5mm
47 Lapua
6.5
x 54xMannlicher-Schoenauer
6.5 x 54x Mannlicher-Schoenauer
6.5mm
55 Swedish Mauser
6.5mm xx 57
55 Mauser
Swedish Mauser
6.5mm
A & DGM
34
19 (5)
Large (2)
3 13 (5)
6.8 Remington
.270
Weatherby SPC
Magnum
A A& AR
419
Large
Large
12
2727
LRMR
4 3
H&R&Magnum
.32.32
Smith
Wesson Long
E E
23 23
Small
Small
1
1
31 31
(4) (4)
–
–
.270 Winchester
Weatherby Magnum
.270
A & AGM
34
Large
Large
11
2727
LRLR
2 4
.32Federal
Smith Magnum
& Wesson Long
.327
E E
23 23
Small
Small
1
1
31 31
(4) (4)
–
–
.270 Winchester
WinchesterShort Magnum
.270
GM
AA&&GM
3
43 (5)
Large
Large
11
2727
(4)LR
– 2
.327 Federal
Small
31 Holders(4)
–
IMPoRtANt:
RCBSMagnum
Shell Holder numbers do notEcorrespond 23
to those of other
manufacturers.1When two Shell
are listed, the
most popular is shown first. It may be necessary to use the alternate, depending on the manufacturer and/or lot of cases being used.
.270 WinchesterWhen
Short Magnum
IMPoRtANt:
Holder numbers
do not correspond
those of other manufacturers.
twocases
Shell Holders
are listed,
& GM are
43 (5)
Large
1
27
(4) It may– be necessary
IMPORTANT:
two Shell AHolders
listed, the
most popular
is shown
first.
to useRCBS
theShell
alternate,
depending
on theto manufacturer
and/orWhen
lot of
being
used.the
most popular is shown first. It may be necessary to use the alternate, depending on the manufacturer and/or lot of cases being used.
rcbS.com
Toll Free Order
Line 1-866-735-6237
72
continued on page 73 >>
nrcbS.com
46 l
n
46
l
th
ha
(5
<< continued from page 72
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
reFerenCe Chart
REFERENCE SECTION
reFerenCe
eFerenCe Chart
hart
Primer
Plug &
Sleeve Size
Case
Trimmer
Collet No.*
Case
Trimmer
Pilot Cal.
Ammo
Ammo
Box
Box Size
Size
2
Large
2
32
MR
3
1
Small
2
31
MP
–
D
2
Large
2
32
MR
8mm Remington Magnum
A
4
Large
1
32
8mm-06
D
3
Large
1
8mm x 57 Mauser (8mm Mauser)
A
3
Large
1
8mm x 68S Magnum
D
34 (5)
Large
.325 Winchester Short Magnum
A
43 (5)
Large
.338 Federal
A & AR
3
Large
.338 Lapua
Die
Group
Shell Holder
& Shell
Plate No.
.32 Winchester Special
A
.32-20 Winchester
E
.32-40 Winchester
Caliber
reference chart
REF.
Case
Case
Case
Case
Trimmer
Trimmer
Trimmer Trimmer
Collet
PilotCal.
Cal.
Collet No.*
No.* Pilot
Die
Die
Group
Group
Shell
Shell Holder
Holder
&& Shell
Shell
Plate
Plate No.
No.
Primer
Primer
Plug
Plug &&
Sleeve
Sleeve Size
Size
.40-60
.40-60 Winchester
Winchester -- .408"
.408"
LEGACY
LEGACY
49
49 (6)
(6)
Large
Large
44
.40-65
.40-65 Shiloh
Shiloh Sharps
Sharps -- .408"
.408"
LEGACY
LEGACY
14
14 (5)
(5)
Large
Large
44
3
.40-70-2
.40-70-2 1/2"
1/2" Sharps
Sharps Straight
Straight
LEGACY
LEGACY
14
14 (5)
(5)
Large
Large
LR
4
.404
.404 Jeffery
Jeffery
SAFARI
SAFARI
41
41 (5)
(5)
32
LR
2
.405
.405 Winchester
Winchester
LEGACY
LEGACY
32
LR
2
10mm
10mm Auto
Auto
BB
2
32
LR
–
.41
.41 Magnum
Magnum
1
32
LR
–
.416
.416 Ruger
Ruger
1
33
MR
2
.416
.416 Remington
Remington Magnum
Magnum
DD
Lube
Lube
Die
Die
Caliber
Caliber
Ammo
Ammo
Box
BoxSize
Size
Lube
Lube
Die
Die
41
41
(4)
(4)
44
41
41
(4)
(4)
44
44
41
41
(4)
(4)
44
Large
Large
HC#2
HC#2
n/a
n/a
(4)
(4)
––
24
24
Large
Large
33
40
40
(4)
(4)
33
27
27
Large
Large
33
40
40
LP
LP
––
BB
30
30
Large
Large
22
41
41
LP
LP
44
DD
44
Large
Large
11
416
416
LR
LR
––
44
Large
Large
11
416
416
LR
LR
––
A & GM
48 (6)
Large
4
33
(4)
–
.416
.416 Rigby
Rigby
DD
37
37 (5)
(5)
Large
Large
44
416
416
(4)
(4)
––
.338 Remington Ultra Magnum
A
38/4 (5)
Large
1
33
(4)
–
.416
.416 Barrett
Barrett
11 1/2"-12
1/2"-12
.50
.50 BMG
BMG
.50
.50 BMG
BMG
.50
.50 BMG
BMG
416
416
(4)
(4)
––
.338 RCM
A
4
Large
1
33
MR
2
.44
.44 Magnum
Magnum
BB
18
18
Large
Large
22
44
44
LP
LP
––
.338 Marlin Express
D
44
Large
-
33
LR
–
.44
.44 S&W
S&W Russian
Russian
COWBOY
COWBOY
18
18
Large
Large
22
44
44
LP
LP
––
.338 Winchester Magnum
A
4
Large
1
33
LR
–
.44
.44 Special
Special
BB
18
18
Large
Large
22
44
44
LP
LP
––
.338-06/.338-06 A-Square
D
3
Large
1
33
LR
2
.444
.444 Marlin
Marlin
CC
28
28
Large
Large
11
44
44
LR
LR
––
.338 Norma Mag
D
48
Large
-
33
LR
2
.44-40
.44-40 Winchester
Winchester
BB&
B
COWBOY
35
35 (5)
(5)
Large
Large
11
44
44
LP
LP
––
.338-378 Weatherby Magnum
A
14
Large
4
33
(4)
–
.45
.45 Automatic
Automatic (45
(45 ACP)
ACP)
BB
33
Large
Large
11
45
45
LP
LP
22
.340 Weatherby Magnum
A
4
Large
1
33
LR
4
.45
.45 Auto
Auto Rim
Rim
BB
88
Large
Large
11
45
45
LP
LP
22
.348 Winchester
D
5 (5)
Large
4
34
MR
–
.45
.45 Glock
Glock Action
Action Pistol
Pistol
BB
33
Large
Large
11
45
45
LP
LP
22
.35 Remington
A
9
Large
1
35
MR
3
.45
.45 Colt
Colt
B &
BB
COWBOY
20
20
Large
Large
11
45
45
LP
LP
––
.35 Whelen
A
3
Large
1
35
LR
2
.45
.45 S&W
S&W Schofield
Schofield
COWBOY
COWBOY
35
35
Large
Large
11
45
45
LP
LP
––
.350 Remington Magnum
D
4
Large
1
35
MR
4
.45-60
.45-60 Winchester
Winchester
LEGACY
LEGACY
49
49 (6)
(6)
Large
Large
44
45-R
45-R
(4)
(4)
44
.356 TSW
B
16
Small
2
35
(4)
–
.45-70
.45-70 U.S.
U.S. Government
Government
CC&&COWBOY
COWBOY
14
14 (6)
(6)
Large
Large
44
45-R
45-R
(4)
(4)
44
.356 Winchester
A
2
Large
2
35
MR
2
.45-75
.45-75 Winchester
Winchester
LEGACY
LEGACY
31
31 (5)
(5)
Large
Large
44
45-R
45-R
(4)
(4)
44
.357 Magnum
B
6
Small
3
35
MP
–
.45-90-2.4"
.45-90-2.4" Sharps
Sharps Straight
Straight
LEGACY
LEGACY
14
14 (5)
(5)
Large
Large
44
45-R
45-R
(4)
(4)
44
.357 Remington Maximum
B
6
Small
3
35
SR
–
.45-100-2.6"
.45-100-2.6" Sharps
Sharps Straight
Straight
LEGACY
LEGACY
14
14 (5)
(5)
Large
Large
44
45-R
45-R
(4)
(4)
44
.357 Sig
A
27
Small
3
35
LP
–
.45-110-2
.45-110-2 7/8"
7/8" Sharps
Sharps Straight
Straight
LEGACY
LEGACY
14
14 (5)
(5)
Large
Large
44
45-R
45-R
(4)
(4)
44
.358 Winchester
A
3
Large
1
35
MR
2
.45-120-3
.45-120-3 1/4"
1/4" Sharps
Sharps Straight
Straight
LEGACY
LEGACY
14
14 (5)
(5)
Large
Large
44
45-R
45-R
(4)
(4)
44
9mm FAR
E
16
Small
2
35
MP
–
.450
.450 Marlin
Marlin
CC
44
Large
Large
11
45-R
45-R
LR
LR
44
9mm x 18 Ultra
B
10
Small
2
35
(4)
–
.450x.400
.450x.400 Express
Express 3"
3" (.400
(.400 Jeffery)
Jeffery) SAFARI
SAFARI
31
31 (5)
(5)
Large
Large
.50
.50 BMG
BMG
41
41
(4)
(4)
––
9mm Luger
B
16
Small
2
35
(4)
–
.450
.450 Rigby
Rigby Rimless
Rimless
SAFARI
SAFARI
37
37 (5)
(5)
Large
Large
HC#2
HC#2
45-R
45-R
(4)
(4)
––
9mm Makarov
E
16
Small
2
35
(4)
–
.454
.454 Casull
Casull
BB
20
20
Large
Large
11
45
45
(4)
(4)
––
44
9mm x 21
B
16
Small
2
35
(4)
–
.458
.458 Winchester
Winchester Magnum
Magnum
CC
44
Large
Large
11
45-R
45-R
LR
LR
9mm x 23 Winchester
B
16
Small
2
35
(4)
–
.458
.458 Lott
Lott
CC
44
Large
Large
11
45-R
45-R
LR
LR
44
.370 Sako Magnum/9.3x66 Sako
D
3
Large
1
36
LR
–
.460
.460 Weatherby
Weatherby Magnum
Magnum
DD
14
14 (5)
(5)
Large
Large
44
45-R
45-R
(4)
(4)
––
9.3mm x 62 Mauser
A
3
Large (2)
1
36
LR
2
.460
.460 Smith
Smith && Wesson
Wesson
9.3mm x 74R
D
4
Large
1
36
LR
–
.460
.460 Steyr
Steyr
.375 H&H Magnum
A
4
Large
1
37
LR
4
.470
.470 Nitro
Nitro Express
Express 33 1/4"
1/4"
.375
.375 Remington
Remington Ultra
Ultra Mag
Mag
AA
38/4
38/4 (5)
(5)
Large
Large
11
37
37
(4)
(4)
––
.475
.475 Linebaugh
Linebaugh 1.400"
1.400"
.375
.375 Ruger
Ruger
AA
44
Large
Large
22
37
37
MR
MR
33
.480
.480 Ruger
Ruger
BB
40
40 (5)
(5)
.375
.375 Winchester
Winchester
CC
22
Large
Large
22
37
37
MR
MR
33
.50
.50 Action
Action Express
Express
BB
33
33 (5)
(5)
.376
.376 Steyr
Steyr
DD
42
42
Large
Large
22
37
37
LR
LR
44
.50-70
.50-70 Gov't
Gov't
LEGACY
LEGACY
31
31 (5)
(5)
.378
.378 Weatherby
Weatherby Magnum
Magnum
DD
14
14 (5)
(5)
Large
Large
44
37
37
(4)
(4)
––
.50-90-2
.50-90-2 1/2"
1/2" Sharps
Sharps Straight
Straight
LEGACY
LEGACY
31
31 (5)
(5)
.38
.38 Colt
Colt Super
Super Auto
Auto (.38
(.38 ACP)
ACP)
EE
39
39
Small
Small
22
35
35
MP
MP
––
.50-95
.50-95 Winchester
Winchester (Express)
(Express)
LEGACY
LEGACY
COWBOY
COWBOY
66
Small
Small
33
35
35
MP
MP
––
.500
.500 Smith
Smith && Wesson
Wesson
.38
.38 Smith
Smith && Wesson
Wesson
BB
44
Large
Large
––
45
45
(4)
(4)
––
11 1/2"-12
1/2"-12
.50
.50 BMG
BMG
.50
.50 BMG
BMG
.50
.50 BMG
BMG
45-R
45-R
(4)
(4)
––
SAFARI
SAFARI
46
46 (6)
(6)
Large
Large
HC#1
HC#1
475
475
(4)
(4)
––
BB
40
40 (5)
(5)
Large
Large
11
475
475
(4)
(4)
––
Large
Large
11
475
475
(4)
(4)
––
Large
Large
11
50
50
(4)
(4)
––
Large
Large
44
50
50
(4)
(4)
44
Large
Large
44
50
50
(4)
(4)
44
31
31 (5)
(5)
Large
Large
44
50
50
(4)
(4)
44
BB
44
44 (5)
(5)
Large
Large
––
50
50
(4)
(4)
––
.38
.38 Special
Special
BB
66
Small
Small
33
35
35
MP
MP
––
.500
.500 Jeffery
Jeffery
SAFARI
SAFARI
37
37 (5)
(5)
Large
Large
HC#1
HC#1
50-R
50-R
(4)
(4)
––
.380
.380 Automatic
Automatic Pistol
Pistol
BB
10
10
Small
Small
11
35
35
(4)
(4)
––
.500
.500 Nitro
Nitro Express
Express
SAFARI
SAFARI
46
46 (6)
(6)
Large
Large
HC#1
HC#1
50-R
50-R
(4)
(4)
––
EE
35
35 (5)
(5)
Large
Large
11
40
40
LP
LP
––
.56-50
.56-50 Spencer
Spencer
LEGACY
LEGACY && COWBOY
COWBOY
22
Large
Large
22
37
37
MR
MR
33
.50
.50 BMG
BMG
.40
.40 S&W
S&W
BB
27
27
Small
Small
33
40
40
LP
LP
––
.505
.505 Gibbs
Gibbs
.400
.400 CorBon
CorBon
DD
33
Large
Large
11
40
40
LP
LP
22
26 NOSLER NEW .38-40
.38-40 Winchester
Winchester
.38-55
.38-55 Winchester
Winchester && Ballard
Ballard
LEGACY
LEGACY
31
31 (5)
(5)
Large
Large
––
50
50
(4)
(4)
––
11 1/2"-12
1/2"-12
.50
.50 BMG
BMG
.50
.50 BMG
BMG
.50
.50 BMG
BMG
50-R
50-R
(4)
(4)
––
SAFARI
SAFARI
47
47 (6)
(6)
Large
Large
.50
.50 BMG
BMG
50-R
50-R
(4)
(4)
––
D
38
Large
1
26
(4)
–
the
in
(( )) in
the
the
(2)
cases
Berdan
primed.
and
priming
must
be
size
SR=Small
Rifle,
MR=Medium
Rifle,
Rifle,
LP=Large
Case
the numerals
numerals
inare
inusually
the table
table indicate
indicate
the following:
following:
(2)Depriming
cases are
are usually
usuallyand
Berdan
primed. Depriming
Depriming
anddone
primingby
musthand.
be done
doneIfby
bycases Ammo
Ammo
Box
size code:
code:
SR=Small
Rifle,
MR=Medium
Rifle, LR=Large
LR=Large
Rifle, MP=Medium
MP=Medium
Pistol,
LP=Large Pistol.
Pistol.
Rotary
Case
(2)
Cases
Berdan
primed.
priming
must
be
wereBox
formed
from
cases
having
boxer-type
primers,
use thePistol,
appropriate
Shell** Rotary
Holder
/
hand.
trimmer—2
hand. IfIf cases
cases were
were formed
formed from
from cases
cases having
having boxer-type
boxer-type primers,
primers, use
use the
the appropriate
appropriate Shell
Shell Holder
Holder for
for that
that caliber.
caliber. (4)
(4) not
not available.
available.
trimmer—2 only.
only. **** For
For ten-X
ten-X brass.
brass.
(5)
Shell
not
Auto
4X4
Shell
Plates
(5) Auto
Auto 4X4
4X4Plug
Shell Plate
Plate
not available.
available.
(6)
Autocartridge.
4X4 and
and Five-Station
Five-Station
Shellavailable.
Plates not
not available.
available.
Primer
& Sleeve
for (6)
that
(4) not
(5) Auto 4x4 Shell Plate not available. (6) Auto 4x4 and Five-Station Shell Plates not available.
Toll Free Order Line 1-866-735-6237
Ammo Box size code: SR=Small Rifle, MR=Medium Rifle, LR=Large Rifle, MP=Medium
Pistol, LP=Large Pistol. (*) Rotary Case Trimmer-2 only. (**) For Ten-X brass.
rcbS.com
rcbS.com
n
47
47
l
73
reloadinG dieS
< TOC >
REFERENCE SECTION
REF.
HUNTINGTON DIE SPECIALTIES - 2014
grouP a
Caliber
Full-Length
Die Set
$45.95
Full-Length
Sizer Die
$37.95
Small Base
Die Set
$49.95
$70.95*
Neck
Sizer Die
$40.95
$49.95*
Neck
Die Set
$49.95
$70.95*
Small Base
Sizer Die
$40.95
$49.95*
Seater
Die
$31.95
Exp-Decap
Unit
$9.95
Trim
Die
$43.95
17265*
.17 REM
17201
17229
17202
17230
—
—
17238
9882
.17 REM fIREBALL
16201
16229
16202
16230
—
—
16238
9882
—
.204 RUGER
10301
10329
10302
10330
—
—
—
9801
—
.218 BEE
10001
10029
10002
10030
—
—
10038
9802
10065*
.22 HORNET
10201
10229
10202
10230
—
—
10238
9802
10265*
.22-250 REM (.22 VAR.)
10601
10629
10602
10630
10603*
10631*
10638
9802
10665
.220 SWIfT
10701
10729
10702
10730
—
—
10738
9802
10765
10865*
.221 REM fIREBALL
10801
10829
10802
10830
—
—
10838
9802
.222 REM
10901
10929
10902
10930
+
+
10938
9802
10965
.222 REM MAG
11001
11029
11002
11030
—
—
11038
9802
11065*
11165
.223 REM (5.56MM)
11101
11129
11102
11130
11103
11131
11138
9802
.223 WSSM
10501
10529
10502
10530
—
—
—
9802
—
.240 WBy MAG
33201
33229
33202
33230
—
—
33238
9805
33265*
11465
.243 WIN
11401
11429
11402
11430
11403
11431
11438
9805
.243 WSSM
11601
11629
11602
11630
—
—
—
9805
—
6MM REM (.244 REM)
11501
11529
11502
11530
11503*
11531*
11538
9805
11565
6MM PPC
22601
22629
22602
22630
—
—
22638
—
22665*
.25-06
12001
12029
12002
12030
+
+
12038
9806
12065
.25 WSSM
12401
12429
12402
12430
—
—
12438
9806
—
.25-20 WIN
11801
11829
11802
11830
—
—
11838
9806
11865*
12130
—
—
12138
9806
12165*
—
+
+
12238
9806
12265*
.25-35 WIN
12101
12129
12102
.250 SAV (.250-3000 SAVAGE)
12201
12229
—
.257 ROBERTS
12501
12529
12502*
12530*
—
—
12538
9806
12565*
.257 WBy MAG
12601
12629
12602*
12630*
—
—
12638
9806
12665*
.260 REM
12801
12829
12802
12830
—
—
12838
9807
12865*
.264 WIN MAG
12701
12729
12702*
12730*
—
—
12738
9807
12765*
13202
13230
—
—
13238
9807
13265*
—
13303
13331
13338
9808
—
13402*
13430*
—
—
13438
9808
13465*
6.5x55 SWEDISH MAUSER
13201
13229
6.8 REMINGTON SPC
13301
13329
.270 WBy MAG
13401
13429
—
.270 WIN
13501
13529
13502
13530
13503
13531
13538
9808
13565
.270 WIN SHORT MAG
31301
31329
31302*
31330*
31303
31331
31338
9808
31365*
.280 REM (7MM ExP REM)
14001
14029
14002*
14030*
14003*
14031*
14038
9809
14065*
.284 WIN
14101
14129
14102
14130
+
+
14138
9809
14165*
7MM REM MAG
13601
13629
13602
13630
13603
13631
13638
9809
13665
7MM REM SA ULTRA MAG
31101
31129
31102*
31130*
—
—
31138
9809
31165*
17865*
7MM REM ULTRA MAG
17801
17829
17802
17830
—
—
17838
9809
7MM STW
26601
26629
26602
26630
—
—
26638
9809
26665*
7MM T/CU
34201
34229
34202
34230
—
—
34238
9811
34265*
7MM WBy MAG
13701
13729
13702
13730
—
—
13738
9809
13765*
7MM WIN SHORT MAG
31401
31429
31402*
31430*
31403
31431
31438
9809
31465*
13965*
7MM-08 REM
13901
13929
13902
13930
+
+
13938
9809
7x57 MAUSER (7MM MAUSER)
13801
13829
13802
13830
—
—
13838
9809
13865
7MMx64 BRENNEKE
34001
34029
34002*
34030*
—
—
34038
9809
34065*
7-30 WATERS
34801
34829
34802*
34830*
—
—
34838
9809
34865*
7.5MM SCH-RUBIN (1911)
33501
33529
33502
33530
—
—
33538
9812
33565*
29002*
29030*
—
—
29038
***
29065*
—
—
—
35038
35065*
14365*
7.62x54R RUSSIAN
29001
29029
7.62MMx39-.308/311
35001
35029
—
7.65MMx53 BELGIUM MAUSER
14301
14329
14302
14330
—
—
14338
**
9814
7.7MMx58 JAPANESE ARISAKA
14401
14429
14402
14430
—
—
14438
9814
14465*
25065*
.30 LUGER (7.65MM LUGER)
25001
25029
25002
25030
—
—
25038
9813
.30 T/C
25201
25229
—
25230
—
—
25238
9812
—
.30-06 SPRINGfIELD
14801
14829
14802
14830
14803
14831
14838
9812
14865
.30-30 WIN
14601
14629
14602*
14630*
—
—
14638
9812
14665
.30-378 WBy MAG
29501
29529
29502
29530
—
—
29538
9812
29565*
14765*
.30-40 KRAG
14701
14729
—
—
—
14738
9812
.300 RCM
26901
26929
26902
26930
—
—
26938
9812
—
.300 REM SA ULTRA MAG
31201
31229
31202*
31230*
—
—
31238
9812
31265*
17602
17630
—
—
17638
9812
17665*
—
15103*
15131*
15138
9812
15165*
.300 REM ULTRA MAG
17601
17629
.300 SAVAGE
15101
15129
—
—
.300 WBy MAG
15201
15229
15202
15230
—
—
15238
9812
15265*
.300 WIN MAG
15301
15329
15302
15330
15303
15331
15338
9812
15365
74
Toll Free Order Line 1-866-735-6237
rcbS.com
n
52
l
continued on page 75 >>
grouP
a (Continued
)
<<
continued
from page
74
Neck
Die Set
$49.95
Neck
$70.95*
Die Set
$49.95
30802*
$70.95*
Neck
15402
Die
Set
30802*
$49.95
$70.95*
15402
grouP a (Continued
HUNTINGTON
DIE)SPECIALTIES
- 2014
Full-Length
Full-Length
Caliber
g
rouP
(Continued
)
.300
WIN a
SHORT
MAG
Caliber
.303 WIN
BRITISH
.300
SHORT MAG
ExPRESS
.300
MAG
.308 WIN
WIN SHORT
/ .307
WIN
.308
MARLIN
ExPRESS
.303
BRITISH
8MMx57
.308
WIN /MAUSER
.307 WIN(8MM MSR)
.308
ExPRESS
8MMMARLIN
REMMAUSER
MAG
8MMx57
(8MM MSR)
.308
WINSPEC
/ .307 WIN
.32 WIN
8MM
REM MAG
8MMx57
MAUSER
(8MM MSR)
.325WIN
WINSPEC
SHORT MAG
.32
8MM
REM MAG
.338
RCM
.325 WIN SHORT MAG
.32
SPECExpress
.338WIN
Marlin
.338
RCM
.325
WIN
SHORT MAG
.338
fEDERAL
.338 Marlin Express
.338
.338 RCM
REM ULTRA MAG
.338
fEDERAL
.338
Express
.338 Marlin
WIN MAG
.338
REM
ULTRA MAG
.338
fEDERAL
.338
LAPUA
.338 WIN MAG
.338
REM WBy
ULTRA MAG
.338-378
.338
LAPUA MAG
.338
WIN
MAG
.340
WBy
MAGMAG
.338-378 WBy
.338
LAPUA
.35 REM
.340
WBy MAG
Caliber
.308 BRITISH
MARLIN
.303
Sizer Die
$37.95
Full-Length
Sizer
Die
30829
$37.95
Die Set
$45.95
Full-Length
Die
Set
30801
$45.95
15401
Full-Length
30801
Die Set
$45.95
14901
15401
15429
Full-Length
30829
Sizer Die
$37.95
14929
15429
16601
16501
30601
16801
30701
16501
30601
23101
30701
16629
16529
30629
16829
30729
16529
30629
23129
30729
.338-378
WBy MAG
.35 REM
WHELEN
.35
.340
WBy
MAG
.357
SIG
.35 WHELEN
.35
.358REM
WIN/.356 WIN
.357
SIG
.35
9.3MMx62
MAUSER
.358WHELEN
WIN/.356
WIN
.357
.375 SIG
H&H MAG
9.3MMx62
MAUSER
.358
WINMAG
.375 WIN/.356
REM MAG
ULTRA
.375
H&H
30801
15501
14901
15401
15901
15501
14901
16001
15901
15501
15701
16001
15901
31601
15701
16001
27301
31601
15701
25401
27301
31601
17301
25401
27301
17701
17301
25401
16301
17701
17301
16601
16301
17701
16801
16601
16301
30601
16801
16501
32701
23101
30701
34501
32701
23101
16901
34501
32701
30901
16901
9.3MMx62
MAUSER
.375 REM
RUGER
.375
ULTRA
MAG
.375
MAG
.375 H&H
RUGER
34501
26801
30901
16901
26801
30829
15529
14929
15429
15929
15529
14929
16029
15929
15529
15729
16029
15929
31629
15729
16029
27329
31629
15729
25429
27329
31629
17329
25429
27329
17729
17329
25429
16329
17729
17329
16629
16329
17729
16829
16629
16329
30629
16829
30802*
15502
15402
15902
15502
16002
15902
15502
—
16002
15902
31602
—
16002
27302
31602
—
—
27302
31602
17302
—
27302
17702*
17302
—
16302
17702*
17302
16602
16302
17702*
16802
16602
16302
30602
16802
16529
32729
23129
30729
34529
32729
23129
16929
34529
32729
30929
16929
—
—
—
—
34502
—
—
16902*
34502
Neck
TOC
< Sizer
>
Die
Small Base
Die Set
$49.95
Small
Base
$70.95*
Die Set
$49.95
30803
$70.95*
Small Base
Die—
Set
30803
$49.95
$70.95*
14903*
—
Small Base
Sizer Die
$40.95
Small
Base
$49.95*
Sizer
Die
$40.95
30831
$49.95*
Small Base
—Die
Sizer
30831
$40.95
$49.95*
14931*
—
16630
—
30630
16830
—
—
30630
—
—
—
+
—
—
—
+
—
—
—
—
+
—
—
—
+
—
—
—
30830*
15530
15430
15930
15530
16030
15930
15530
—
16030
15930
31630
—
16030
27330
31630
—
25430
27330
31630
17330
25430
27330
17730*
17330
25430
16330
17730*
17330
16630
16330
17730*
16830
16630
16330
30630
16830
16602
—
30602
16802
—
—
30602
—
—
30803
15503
14903*
—
—
15503
14903*
—
—
15503
—
—
—
31603
—
—
—
31603
—
—
—
31603
—
—
—
—
—
—
16303*
—
—
—
16303*
—
—
—
16303*
—
—
—
—
—
—
34530
—
—
16930*
34530
—
30902*
16902*
34502
26802
30902*
16902*
26802
34529
26829
30929
16929
26829
REF.
$40.95
Neck
$49.95*
Sizer
Die
$40.95
30830*
$49.95*
Neck
15430
Sizer
Die
30830*
$40.95
$49.95*
15430
+
—
—
—
—
—
—
—
—
—
30930*
16930*
34530
26830
30930*
16930*
26830
30831
15531
14931*
—
—
15531
14931*
—
—
15531
—
—
—
31631
—
—
—
31631
—
—
—
31631
—
—
—
—
—
—
16331*
—
—
—
16331*
—
—
—
16331*
—
—
+
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
reloadinG dieS
reloadinG dieS
Trim
Exp-Decap
REFERENCE
SECTION
Die
Unit
Seater
Die
$31.95
Seater
Die
30838
$31.95
$9.95
Exp-Decap
Unit
9812
$9.95
15438
Seater
30838
Die
$31.95
14938
15438
30838
15538
14938
15438
15938
15538
14938
16038
15938
15538
15738
16038
15938
31638
15738
16038
27338
31638
15738
25438
27338
31638
17338
25438
27338
17738
17338
25438
16338
17738
17338
16638
16338
17738
16838
16638
16338
30638
16838
9814
Exp-Decap
9812
Unit
$9.95
9812
9814
9812
9812
9812
9814
9817
9812
9812
9817
9817
9812
9816
9817
9817
9817
9816
9817
9828
9817
9816
9818
9828
9817
9828
9818
9828
9818
9828
9818
9818
9818
9828
9818
9818
9818
9818
9818
9818
9818
9818
16638
16538
30638
16838
30738
16538
30638
23138
30738
9818
9820
9818
9818
9823
9820
9818
9834
9823
16538
32738
23138
30738
34538
32738
16565*
32765*
23165*
30765*
34565*
32765*
23165*
16965*
34565*
9834
9822
9821
9823
9822
9822
9821
9822
9822
16938
26838
15465*
Trim
30865*
Die
$43.95
—
15465*
30865*
15565
—
15465*
15965
15565
—
16065*
15965
15565
15765*
16065*
15965
—
15765*
16065*
—
—
15765*
—
—
—
—
—
—
17765*
—
—
16365*
17765*
—
16665*
16365*
17765*
16865*
16665*
16365*
30665*
16865*
16665*
16565*
30665*
16865*
30765*
16565*
30665*
23165*
30765*
9820
9823
9834
9823
9821
9823
23138
16938
34538
32738
30938
16938
34538
26838
30938
$43.95
Trim
Die
30865*
$43.95
32765*
30965*
16965*
34565*
—
30965*
9822
9822
16965*
—
*If.375
notREM
in stock,
please allow 4-6 weeks
**A .30 caliber
expander Ball
is also included
and Sizer Die.30938
***A .310 caliber
is also
ULTRA MAG
30901 for delivery.
30929
30902*
30930*
— with Die Set —
9822expander Ball
30965*
included
with Die
Set and
Sizer
the RCBS
Catalog
for thisBall
item.
.375
26801+See
26829
26802
26830
— with Die Set —
9822expander Ball
—is also
*If
notRUGER
in stock,
please
allow
4-6 Die.
weeks
for delivery.
**ASpecial
.30 caliber
expander
is also included
and Sizer Die.26838
***A .310 caliber
included with Die Set and Sizer Die. +See the RCBS Special Catalog for this item.
(*) not
If not
in stock,
please
4-6 weeks
for delivery.
A .30
caliber Ball
Expander
is also
withSizer
Die Die.
Set and
Die. expander Ball is also
*If
in stock,
please
allowallow
4-6 weeks
for delivery.
**A .30 (**)
caliber
expander
is also Ball
included
withincluded
Die Set and
***A Sizer
.310 caliber
(***) A .310 caliber Expander Ball is also included with Die Set and Sizer Die. (+) See the RCBS Special Catalog for this item.
included with Die Set and Sizer Die. +See the RCBS Special Catalog for this item.
grouP b
grouP b
g
rouP b
.32 AUTO (1)
Caliber
Caliber
.357 MAG/.357 REM MAx/.38 SPL
3-Die
Carbide
Roll Crimp
3-Die
Set
Carbide
$69.95
Roll Crimp
—
Set
3-Die
$69.95
18212
Carbide
Roll —
Crimp
—
Set
18212
—
$69.95
3-Die
Carbide
Taper Crimp
3-Die
Set
Carbide
$69.95
Taper Crimp
20015
Set
3-Die
$69.95
18215
Carbide
20015
Taper
Crimp
20515
Set
18215
20415
$69.95
.32
(1)
9MMAUTO
LUGER/9x21/356
TSW/9x23 WIN/9x18 ULTRA
.357 MAG/.357 REM MAx/.38 SPL
9MM
LUGER/9x21/356
TSW/9x23
WIN/9x18 ULTRA
—
20515
.40AUTO
S&W/10MM
—
22115
.32
(1) AUTO
—
20015
.380
AUTO
—
20415
.41 MAG
18512
—
.357
MAG/.357
REM MAx/.38 SPL
18212
18215
.40
S&W/10MM
AUTO
—
22115
.44 MAG/.44
SPL
18612
—
9MM
LUGER/9x21/356
TSW/9x23 WIN/9x18 ULTRA
—
20515
.41
MAG
18512
—
.44-40
WIN
(3)
—
—
.380 AUTO
—
20415
.44
MAG/.44
SPL
18612
—
.44-.40
WIN
JACKETED
(4)
—
—
.40 S&W/10MM AUTO
—
22115
.44-40
WIN (3)
—
—
.45 MAG
AUTO(ACP)/AUTO
RIM/GLOCK ACT. PISTOL
—
18915
.41
18512
—
.44-.40
WIN
JACKETED
(4)
—
—
.45 MAG/.44
COLT SPL
19112
.44
18612
—
.45
RIM/GLOCK ACT. PISTOL
—
18915
.460AUTO(ACP)/AUTO
S&W
24212
.44-40
WIN (3)
—
—
.45
COLT
19112
—
.454 CASULL
23212
.44-.40
WIN JACKETED (4)
—
—
.460
S&W
24212
—
.480
RUGER/.475
LINEBAUGH
1.400"
35212
—
.45 AUTO(ACP)/AUTO RIM/GLOCK ACT. PISTOL
—
18915
.454
CASULLExPRESS
23212
—
.50 COLT
ACTION
—
—
.45
19112
.480
RUGER/.475
LINEBAUGH
1.400"
35212
—
.500 S&W
S&W/.500 S&W
SPL
23812
.460
24212
—
.50
ACTION
ExPRESS
—
—
.454 CASULL
23212
—
.500 RUGER/.475
S&W/.500
S&W
SPL from
23812
—
*May
not be available
with .311”—
bullets.
.480
LINEBAUGH
1.400"stock. 1: For use
35212
3-Die
Taper
Crimp
3-Die
Set
Taper
$50.95
Crimp
—
Set
3-Die
$50.95
—
Taper
—
Crimp
—
Set
—
—
$50.95
3-Die
Roll
Crimp
3-Die
Set
Roll
$50.95
Crimp
—
Set
3-Die
$50.95
—
Roll
—
Crimp
—
Set
—
—
$50.95
Carbide
Sizer
Die
Carbide
$49.95
Sizer
20037
Die
$49.95
18237
Carbide
20037
Sizer
20537
Die
18237
20437
$49.95
Steel
Sizer
Die
Steel
$27.95
Sizer
—
Die
$27.95
18332
Steel
—
Sizer
—
Die
18332
—
$27.95
Expander
Die
$19.95
Expander
20053
Die
$19.95
18353
Roll Crimp
Seater
Die
Roll
Crimp
$25.95
Seater
—
Die
$25.95
18342
Roll
Crimp
—
Seater
20538
Die
18342
—
$25.95
Taper Crimp
Seater
Die
Taper
Crimp
$25.95
Seater
20062
Die
$25.95
18262
Taper
Crimp
20062
Seater
20562
Die
18262
20462
$25.95
Decap
Unit
$9.95
Decap
9622
Unit
$9.95
9622
Trim
Die
$44.95
Trim
20065*
Die
$44.95
18265/18365
20053
9622
20065*
Trim
Decap
Expander
20552
9622
20565*/22365*
Die
Unit
Die
18353
9622
18265/18365
20449
9622
20465*
$44.95
$9.95
$19.95
—
—
20537
—
20552
20538
20562
9622
20565*/22365*
22137
22153
—
22162
9622
22165*/21665*
—
—
20037
—
20053
20062
20065*
—
—
20437
—
20449
—
20462
9622
20465*
18537
—
18553
18542
—
9622
18565*
—
—
18237
18332
18353
18342
18262
18265/18365
—
—
22137
—
22153
—
22162
9622
22165*/21665*
18608
18637
18732
18753
18742
18662
9622
18665/18765*
—
—
20537
—
20552
20538
20562
20565*/22365*
—
—
18537
—
18553
18542
—
9622
18565*
18805
—
—
18832
18853
18839
—
9622
18865*
—
20437
—
20449
—
20462
20465*
18608
—
18637
18732
18753
18742
18662
9622
18665/18765*
18806
—
—
18832
—
18840
—
9622
18865*
—
22137
—
22153
—
22162
22165*/21665*
18805
—
—
18832
18853
18839
—
9622
18865*
18937
18953
18942
18962
9622
18965**
—
—
18537
—
18553
18542
—
18565*
18806
—
—
18832
—
18840
—
9622
18865*
19108
19137
19132
19153
19142
—
9622
19165*
18608
—
18637
18732
18753
18742
18662
18665/18765*
—
—
18937
—
18953
18942
18962
9622
18965**
—
24237
—
24253
24238
—
9622
—
18805
—
—
18832
18853
18839
18865*
19108
—
19137
19132
19153
19142
—
9622
19165*
—
23237
—
23253
23242
—
9622
23265*
18806
—
—
18832
—
18840
18865*
—
—
24237
—
24253
24238
—
9622
—
35208
—
35237
35232
23553
35238
—
9622
35265*
—
18937
—
18953
18942
18962
18965**
—
—
23237
—
23253
23242
—
9622
23265*
—
22210
—
22232
22253
—
22262
9622
22265*
19108
—
19137
19132
19153
19142
—
19165*
35208
—
35237
35232
23553
35238
—
9622
35265*
23808
23837
23832
23853
23838
—
9622
—
—
—
24237
—
24253
24238
—
22210
—
22232
22253
—
22262
9622
22265*
—
—
23237
—
23253
23242
—
9622
23265*
23808
23837
23832
23853
23838
—
9622
—Sierra
2:35208
For use with—
.314”
bullets
.
3:
Regular
Seater
Die
for
all
lead
and
jacketed
bullets
from
Hornady,
—
35237
35232
23553
35238
—
9622
35265*
and
Speer.
4:
Jacketed
Seater
Die
for
Remington
bullets
only.
**Not
for
use
with
.45
Auto
Rim
or
.45
GAP.
.50
ACTION
ExPRESS
—
—
—
22210
—
22232
22253
—
22262
9622
22265*
(*)
May
be available
(1) For
with
.311”2:bullets.
(2) For
use
with ..314”
bullets.
(3) Regular
Die
for all bullets
lead and
*May
notnot
be available
fromfrom
stock.stock.
1: For use
withuse
.311”
bullets.
For use with
.314”
bullets
3: Regular
Seater
Die for allSeater
lead and
jacketed
fromjacketed
Hornady, Sierra
.500 S&W/.500 S&W SPL
23812
—
23808
—
23837
23832
23853
23838
—
9622
—
.380 AUTO
Caliber
bullets
from
SierraDie
and
(4) Jacketed
Seater
(**) Not for use with .45 Auto Rim or .45 GAP.
and Speer.
4: Hornady,
Jacketed Seater
forSpeer.
Remington
bullets only.
**NotDie
for for
useRemington
with .45 Autobullets
Rim oronly.
.45 GAP.
*May not be available from stock. 1: For use with .311” bullets. 2: For use with .314” bullets . 3: Regular Seater Die for all lead and jacketed bullets from Hornady, Sierra
and Speer. 4: Jacketed Seater Die for Remington bullets only. **Not for use with .45 Auto Rim or .45 GAP.
grouP C
grouP C
Caliber
g
rouP C
.30
M-1 CARBINE
Caliber
.375 WIN
3-Die
Carbide
Taper Crimp
3-Die
Set
Carbide
$93.95
Taper Crimp
18015
Set
3-Die
$93.95
—
Carbide
18015
Taper
Crimp
—
Set
—
—
$93.95
.30
CARBINE
.444M-1
MARLIN
.375 WINUS GOV'T
.444
MARLIN
—
.450M-1
MARLIN
—
.30
CARBINE
18015
.45-70
USMAG
GOV'T
—
.458 WIN
WIN
—
.375
—
.450
MARLIN
—
.458 MARLIN
LOTT
—
.444
—
.458 WIN MAG
—
.45-70
US
GOV'T
— stock.
(*)
May
not
be
available
from
.458
LOTT
—
*May
not
be
available
from
stock.
.450 MARLIN
—
.458 WIN
MAG
—
*May
not
be
available
from
stock.
.458 LOTT
—
.45-70
Caliber
*May not be available from stock.
3-Die
Roll
Crimp
3-Die
Set
Roll
$60.95
Crimp
—
Set
3-Die
$60.95
20604
Roll
—
Crimp
20704
Set
20604
20904
$60.95
20704
35504
—
20904
20804
20604
35504
24104
20704
20804
20904
24104
35504
20804
24104
3-Die
Taper
Crimp
3-Die
Set
Taper
$60.95
Crimp
18010
Set
3-Die
$60.95
—
Taper
18010
Crimp
—
Set
—
—
$60.95
—
—
18010
—
—
—
—
—
—
—
—
—
—
—
—
Steel
Sizer
Die
Steel
$32.95
Sizer
18032
Die
$32.95
20633
Steel
18032
Sizer
20733
Die
20633
20933
$32.95
Carbide
Sizer
Die
Carbide
$68.95
Sizer
18037
Die
$68.95
—
Carbide
18037
Sizer
—
Die
—
—
$68.95
—
20733
—
35533
18037
18032
—
20933
—
20833
—
20633
—
35533
—
24133
—
20733
—
20833
—
20933
—
24133
—
35533
—
20833
— rcbS.com
24133
n
n
53
l
l
Expander
Die
$22.95
Expander
18053
Die
$22.95
20658
18053
Expander
20758
Die
20658
20955
$22.95
20758
35558
18053
20955
20858
20658
35558
20858
20758
20858
20955
20858
35558
20858
20858
Toll Free OrderrcbS.com
Line 1-866-735-6237
53
rcbS.com
Roll Crimp
Seater
Die
Roll
Crimp
$29.95
Seater
—
Die
$29.95
20638
Roll
Crimp
—
Seater
20738
Die
20638
20938
$29.95
20738
35538
—
20938
20838
20638
35538
24138
20738
20838
20938
24138
35538
20838
24138
Taper Crimp
Seater
Die
Taper
Crimp
$29.95
Seater
18062
Die
$29.95
Taper—
Crimp
18062
Seater
—
Die
—
—
$29.95
—
—
18062
—
—
—
—
—
—
—
—
—
—
—
—
Decap
Unit
$9.95
Decap
9622
Unit
$9.95
9619
9622
Decap
9619
Unit
9619
9619
$9.95
9619
9619
9622
9619
9619
9619
9619
9619
9619
9619
9619
9619
9619
9619
9619
Trim
Die
$43.95
Trim
18065*
Die
$43.95
20665*
18065*
Trim
20765*
Die
20665*
20965*
$43.95
20765*
35565*
18065*
20965*
20865*
20665*
35565*
24165*
20765*
20865*
20965*
24165*
35565*
20865*
24165*
75
reloadinG dieS
reloadinG
dieS
REFERENCE SECTION
reloadinG
dieS
grouP d
grouP d
grouP d
Caliber
Caliber
.17 HORNET
.17 K-HORNET
HORNET
Caliber
.22
< TOC >
Full-Length
Die Set
Full-Length
$80.95
Die Set
Full-Length
$80.95
21801
Die
Set
21801
$80.95
26201
Full-Length
Sizer Die
Full-Length
$56.95
Sizer
Die
Full-Length
$56.95
21829
Sizer
Die
21829
$56.95
26229
.17 REM
HORNET
21801
21829
K-HORNET
26201
26229
.22
JET
10401
10429
K-HORNET
26201
26229
REM JETHI POWER
10401
10429
.22 SAVAGE
33801
33829
.22 REM
JETRIMMED
10401
10429
SAVAGE
HI POWER
33801
33829
5.6MMx50
26301
26329
.22
HI POWER
33801
33829
5.6MMx50
26301
26329
5.7
xSAVAGE
28 (fN)RIMMED
11701
11729
5.6MMx50
26301
26329
5.7 xROBERTS
28 (fN)RIMMED
11701
11729
.257
IMP 40
32201
32229
5.7
28 (fN) IMP 40
11701
11729
.257x ROBERTS
32201
32229
6MMx45
28901
28929
.257
ROBERTS IMP 40
32201
32229
6MMx45
28901
28929
264
LBC-AR
16401
16429
26 NOSLER
NEW 26501
—
6MMx45
28901
28929
264
LBC-AR
16401
16429
.280
ACKLEy IMPROVED
17001
17029
264
16401
16429
.280LBC-AR
ACKLEy IMPROVED
17001
17029
6.5MM-06
27801
27829
.280
ACKLEy
IMPROVED
17001
17029
6.5MM-06
27801
27829
6.5MM
REM MAG.
33401
33429
6.5MM-06
27801
27829
6.5MM REMWIN
MAG.
33401
33429
6.5MM-284
28701
28729
REM WIN
MAG.
33401
33429
6.5MM-284
28701
28729
6.5MM
CREEDMOOR
32901
32929
6.5MM-284
WIN
28701
28729
6.5MM CREEDMOOR
32901
32929
6.5MMx47
LAPUA
12901
12929
6.5MM
CREEDMOOR
32901
32929
6.5MMx47
LAPUA
12901
12929
6.5MMx54
MANNLICHER-SCHOEN.
27701
27729
6.5MMx47
LAPUA
12901
12929
6.5MMx54 MAUSER
MANNLICHER-SCHOEN.
27701
27729
6.5MMx57
32801
32829
6.5MMx54
27701
27729
6.5MMx57 MANNLICHER-SCHOEN.
MAUSER
32801
32829
6.5MMx68S
27901
27929
6.5MMx57
MAUSER
32801
32829
6.5MMx68S
27901
27929
7MM
B R REM
34101
34129
6.5MMx68S
27901
27929
7MM B R RIMMED
REM
34101
34129
7MMx65
26701
26729
7MM
B R RIMMED
REM(7.63MM MAUSER)
34101
34129
7MMx65
26701
26729
.30
MAUSER
25101
25129
7MMx65
RIMMED
26701
26729
MAUSER
(7.63MM MAUSER)
25101
25129
.30
REM
29201
29229
MAUSER
25101
25129
29201
29229
.30 REM
AR (7.63MM MAUSER)
25301
25329
.30 REM
29201
29229
25301
25329
.300
AACAR
BLK
22401
22429
.30
AR
25301
25329
.300REM
AACWIN
BLKMAG
22401
22429
.30-338
29401
29429
AACWIN
BLK
22401
22429
.30-338
MAG
29401
29429
.300
H&H
MAG
15001
15029
.30-338
MAG
29401
29429
.300 NORMA
H&HWIN
MAG
15001
15029
.308
15601
15629
.300
MAG
15001
15029
.308 H&H
NORMA
MAG MAS
15601
15629
7.5MMx54
fRENCH
29101
29129
.308
NORMA
MAG MAS
15601
15629
7.5MMx54
29101
29129
.32-40
WIN fRENCH
32501
32529
7.5MMx54
29101
29129
.32-40 WIN fRENCH MAS
32501
32529
8MM-06
32601
32629
.32-40
32501
32529
8MM-06WINMAGNUM
32601
32629
8MMx68S
34401
34429
8MM-06
32601
32629
8MMx68S MAGNUM
34401
34429
.338-06/.338-06
A-SQUARE
16701
16729
8MMx68S
MAGNUM
34401
34429
.338-06/.338-06
16701
16729
.338
NORMA
MAGA-SQUARE
13001
13029
.338-06/.338-06
16701
16729
.338 WIN
NORMA MAGA-SQUARE
13001
13029
.348
33601
33629
.338
NORMA
MAG
13001
13029
.348 REM
WIN
33601
33629
.350
MAG
33701
33729
.348
WIN
33601
33629
.350 SAKO
REM MAG
33701
33729
.370
MAG/9.3x66
14201
14229
.350
33701
33729
.370 REM
SAKOMAG
MAG/9.3x66
14201
14229
9.3MMx74
RIMMED
34601
34629
.370
SAKO MAG/9.3x66
14201
14229
9.3MMx74
RIMMED
34601
34629
.376
STEyR
17901
17929
.376
STEyR
17901
17929
9.3MMx74
RIMMED
34601
34629
.378
WBy
MAG
33001
33029
.376
STEyR
17901
17929
.378 CORBON
WBy
MAG
33001
33029
.400
17501
17529
.378
WBy
MAG
33001
33029
.400 RUGER
CORBON
17501
17529
.416
13101
13129
.400 REM
CORBON
17501
17529
RUGER
13101
13129
.416
MAG
22701
22729
RUGER
13101
13129
REM MAG
22701
22729
.416 RIGBy
22801
22829
.416 WBy
REM
22701
22729
RIGByMAG
22801
22829
.460
33101
33129
.416
RIGByMAG
22801
22829
.460 WBy
33101
33129
.460 WBy MAG
33101
33129
C
Neck
Die
Set
Neck
$95.95
Die
Set
Neck
$95.95
—Set
Die
— *
$95.95
26202
Neck
Sizer
Die
Neck
$68.95
Sizer
Die
Neck
$68.95
21830
Sizer
Die
21830
$68.95
26230*
— *
21830
26202
26230*
10402*
10430*
26202
26230*
10402**
10430*
33802*
33830*
10402*
10430*
33802*
33830*
26302*
26330*
33802*
33830*
26302*
26330*
—
—
26302*
26330*
—
—
32202*
32230*
—
32202*
32230*
—
28930
32202*
32230*
28930
—
16430
—
—
28930
16430
—
17030
—
16430
17030
27802*
27830*
17030
27802*
27830*
—
—
27802*
27830*
—
—
—
—
32930
—
—
32930
12902
12930
—
32930
12902
12930
27702*
27730*
12902
12930
27702*
27730*
32802*
32830*
27702*
27730*
32802*
32830*
27902*
27930*
32802*
32830*
27902*
27930*
34102*
34130*
27902*
27930*
34102*
34130*
26702*
26730*
34102*
34130*
26702*
26730*
25102*
25130*
26702*
26730*
25102*
25130*
29202*
29230*
25102*
25130*
29202*
29230*
—
—
29202*
29230*
—
—
22430
—
—
22430
22430
29402*
29430*
— 22430
29402*
29430*
15002*
15030*
29402*
29430*
15002*
15030*
15602*
15630*
15002*
15030*
15602*
15630*
29102*
29130*
15602*
15630*
29102*
29130*
32502*
32530*
29102*
29130*
32502*
32530*
32602*
32630*
32502*
32530*
32602*
32630*
34402*
34430*
32602*
32630*
34402*
34430*
16702*
16730*
34402*
34430*
16702*
16730*
—
13030
16702*
16730*
13030
—
—
—
13030
—
33702*
33730*
33702*
33730*
—
—
33702*
33730*
—
—
34602*
34630*
—
—
34602*
34630*
17902*
17930*
17902*
17930*
34602*
34630*
33002*
33030*
17902*
17930*
33002*
33030*
—
—
33002*
33030*
—
—
13130
—
—
13130
22702*
22730*
—
13130
22702*
22730*
22802*
22830*
22702*
22730*
22802*
22830*
33102*
33130*
22802*
22830*
33102*
33130*
33102*
33130*
REF.
Small Base
Die Set
Small
Base
$95.95
Die Set
Small
Base
$95.95
—Set
Die
$95.95
—
—
—
—
—
11703
11703
—
11703
—
28903
—
28903
16403
—
28903
16403
—
16403
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
HUNTINGTON DIE SPECIALTIES - 2014
Seater
Die
Seater
$44.95
Die
Seater
$44.95
—
Die
—
$44.95
26238
Small Base
Sizer Base
Die
Small
$68.95
Sizer
Die
Small
$68.95
—Base
Sizer
Die
$68.95
—
—
26238
—
10438
26238
10438
—
33838
10438
33838
—
26338
—
33838
26338
11731
11738
26338
11731
11738
—
32238
11731
11738
—
32238
28931
—
—
32238
28931
16431
—
—
—
28931
16431
—
—
16431
—
—
27838
—
27838
—
33438
27838
33438
—
28738
—
33438
28738
32931
32938
28738
32931
32938
—
12938
32931
32938
12938
—
27738
12938
27738
—
32838
27738
32838
—
27938
32838
27938
—
34138
27938
34138
—
26738
34138
26738
—
25138
26738
25138
—
29238
—
25138
29238
25331
25338
29238
25331
25338
—
—
25331
25338
—
—
29438
—
29438
—
—
15038
29438
15038
—
15638
15038
15638
—
29138
15638
29138
—
32538
29138
32538
—
32638
32538
32638
—
34438
32638
34438
—
16738
34438
16738
—
13038
16738
13038
—
33638
13038
33638
—
33738
33638
33738
—
14238
33738
14238
—
34638
—
14238
34638
—
17938
17938
—
34638
—
33038
17938
33038
—
17538
33038
17538
—
13138
17538
13138
—
22738
13138
22738
—
22838
22738
22838
—
33138
—
22838
33138
—
33138
D
Trim
Die
Trim
$61.95
Die
Trim
$61.95
—
Die
—
$61.95
26265*
Exp-Decap
Unit
Exp-Decap
$9.95
Unit
Exp-Decap
$9.95
—
Unit
—
$9.95
9802
—
9802
9800
9802
9800
9803
9800
9803
9802
9803
9802
9802
9806
9802
9806
—
9806
—
9807
—
—
9807
—
9807
9807
9807
9807
—
—
9807
—
9807
9807
9807
9809
9807
9809
9809
9813
9809
9813
9812
9813
9812
9812
—
—
9812
—
9812
9812
9812
9812
9832
9812
9832
9816
9832
9816
9817
9816
9817
9817
9828
9817
9828
9828
9819
9828
9819
9820
9819
9820
9821
9820
9821
9821
9821
9822
9821
9822
9822
9835
9822
9835
9827
9835
9827
9827
9825
9827
9825
9826
9825
9826
9826
—
26265*
10465*
26265*
10465*
33865*
10465*
33865*
26365*
33865*
26365*
11765^*
26365*
11765^*
32265*
11765^*
32265*
—
32265*
—
—
—
—
27865*
27865*
—
27865*
—
—
—
—
27765*
—
27765*
32865*
27765*
32865*
27965*
32865*
27965*
34165*
27965*
34165*
26765*
34165*
26765*
25165*
26765*
25165*
29265*
25165*
29265*
—
29265*
—
—
29465*
—
29465*
15065*
29465*
15065*
15665*
15065*
15665*
29165*
15665*
29165*
32565*
29165*
32565*
32665*
32565*
32665*
34465*
32665*
34465*
16765*
34465*
16765*
—
16765*
—
33665*
—
33665*
33765*
33665*
33765*
—
33765*
—
34665*
34665*
—
17965*
34665*
17965*
33065*
17965*
33065*
17565*
33065*
17565*
—
17565*
—
22765*
—
22765*
22865*
22765*
22865*
33165*
22865*
33165*
33165*
reloading dies
(*) If not in stock, allow 4-6 weeks for delivery. (^) Includes extended shell holder.
C Cowboy
Dies
*If not in stock,
allow 4-6 weeks for delivery. ^Includes extended shell holder.
*If not in stock, allow 4-6 weeks for delivery. ^Includes extended shell holder.
not in stock,
allow 4-6isweeks
^Includes
extendedshooting
shell holder.
Cowboy*IfAction
Shooting
one for
ofdelivery.
the fastest
growing
rouP e
sports. g
Shooters
must have
speed3-Dieand accuracy,
while
g
rouP e
3-Die
3-Die
Carbide
Roll and ammo
Carbidecostumes
Carbide
grouP
ecreating
the espirit of the Taper
1880s.
Guns,
3-Die
3-Die
Sizer
Crimp
Roll3-Die
Crimp
Crimp
D 1-1/2˝-12 Dies
The dies are precision machined by the same craftsmen that
produce our Precisioneered® Reloading Dies. The Full Length
Taper Crimp
Rollreamed
Crimp
Steel Die is drilled and
Sizer
to
the dimensions
developed
Trim
Decap
Seater
Seater
Expander
Sizer
Taper
Roll
Crimp
Steel
Carbide
Roll
Carbide
Carbide
Die
Unit
DieCrimp
Die
Die
Die
Die
Set
Set
Set
3-Die
3-Die
3-Die
Trim
Seater
Seater
Expander
Sizer
Sizer
Crimp
Roll
Crimp
Taper
Crimp
must fit the
period.
Making
ammo
that
fits
the
Old
West
image
over
the
years.
Then
each
die
is
hand
polished,Decap
heat treated
and
$61.95
$9.95
$40.95
$40.95
$31.95
$51.95
$70.95
$87.95
$107.95
$107.95
Caliber
Taper
Crimp
Roll
Crimp
Steel
Carbide
Roll
Carbide
Carbide
Die
Unit
Die
Die
Die
Die
Die
Set
Set
Set
Trim
Decap
Seater
Seater
Expander
Sizer
Sizer
Crimp
Roll
Crimp
Crimp
$61.95
.25 AUTO (.25lead
ACP) bullets,Taper
21015
—
—
21037
—
21049
—
21062
9621
21065*+
$9.95
$40.95
$40.95
$31.95
$51.95
$70.95
$87.95
$107.95
$107.95
Caliber
means loading
jacketed
bullets
are not
then
dies
for use
Die with
Unit
Die are designed
Die
Die These massive
Dierepolished.
DieIt
Set allowed.
Set
Set
.25 AUTO
(.25S&W
ACP)L/H&R MAG
21015
—
21037
21049
—
21062
9621
21065*+
$61.95
$9.95
.327
fed/.32
21415
21412
—
21437
—
21453
21442
21462
9622
20165/21365*+∆
$40.95
$40.95
$31.95
$51.95
$70.95
$87.95
$107.95
$107.95
Caliber
®
also means
that
the
must
be designed
to 18105
work
properly
the18132
AmmoMaster—2
or 18139
the
Single
Stage
Press
.25
ACP)
21015
—
21037
—
21049
— AmmoMaster
21062
9621
21065*+
.327AUTO
fed/.32
L/H&Rbullets
MAG
21415
21412
21437
21453
21442
21462
20165/21365*+∆
.32-20
WIN(.25S&W
—
—
—
18153
—
9622
18165*+
n lever-action
and
revolvers.
RCBS’
Cowboy
with
Kit installed.
All Dies
here
.327 fed/.32
S&W L/H&R
MAG single-action
21415
21412
—
21437
—the .50 BMG
21453
21442
21462
9622 listed
20165/21365*+∆
.32-20
WINrifles
18105
18132
18153
18139
—
18165*+
9MM
fAR
—
—
23210**
—
23232
— Conversion
—
23262
9622
— are
.32-20
WINto slightly different
18105
18132
18153
18139
—
9622
18165*+
fAR
—
23210**
—
23232
—
23262
—
MAKAROV
23015
—
— our regular
23037
—
23053
— thread.
23062
9622
23065*+
Dies are 9MM
built
dimensions
than
manufactured
with
1-1/2”-12
Full Length
Die Set includes
fARSUPER AUTO/ACP
—
23210**
—
23232
—
23262
9622
—
9MMCOLT
MAKAROV
23015
23037
23053
23062
23065*+
.38
20215
—
—
20237
—
20252
—
20262
9622
20265*+
dies to allow
optimum
sizing,
expanding,
seating
and
crimping
Full
Length
Sizer
Die
with
Expander-Decapping
Unit
and
Seater
9MMCOLT
MAKAROV
23015
23037
23053
23062
9622
23065*+
.38-40
WIN
(1) AUTO/ACP
—
—
35605
—
35632
35653
35639
—
9622
35665*+
.38
SUPER
20215
—
20237
—
20252
—
20262
20265*+
.38
COLT
SUPER
AUTO/ACP
20215
—
20237
—
20252
—
20262
20265*+
.38-40
WIN
(1)
—
—
35605
—
35632
35653
35639
—
9622
35665*+
needed(*)
load
great
leadfrom
bullet
ammo.
Die
with
Bullet
Seater
Plug.
Trim
Dieonly.
is case hardened to prevent
*to
May
not
be
available
stock.
** 9mm
FAR isFAR
a steel
with
taper
crimp.
1:crimp.
For
use
lead
only.
May
not
be
available
from
(**) —
9mm
is35605
asizing
steel die
sizing
with
taper
(1)with
For
use bullets
with
lead
bullets
.38-40
WIN
(1)
— stock.
—die
35632
35653
35639
—
9622
35665*+
damage
the
not be
availableShell
from
stock.
** 9mm
FAR is∆aNot
steel
dieuse
with
taper
crimp.
Fortouse
withdie
leadwhen
bulletsfiling
only. cases to length. Neck Sizer Die
(+)
Requires
Extended
Shell
Holder,
not included.
()
Not
for
Fed1:Mag.
+* May
Requires
extended
Holder,
not
included.
forsizing
use with
.327with
Fed.327
Mag.
*+ May
not
be
available
from
stock.
**
9mm
FAR
is
a
steel
sizing
die
with
taper
crimp.
1:
For
use
with
lead
bullets
only.
Requires extended Shell Holder, not included. ∆ Not for use with .327 Fed Mag.
sizes only the neck, not the shoulder and body.
+ Requires extended Shell Holder, not included. ∆ Not for use with .327 Fed Mag.
legaCy
SerieS dieS
1-1/2˝-12
legaCy SerieS dieS
Roll Crimp
Steel Carbide
3-Die Carbide Dies
3-Die
3-Die
Full-Length
Legacy
Series
Seater Decap
Seaterthat
Expander
Expander
Sizer
Sizer
Roll Crimpmachined
Crimp
Full-Length
legaCy SerieS dieSDie Set
The
diesRoll
are
precision
by the
same
craftsmen
CaliberCaliber
Legacy
Dies
With new
and
every
is aUnit
Die it Plug
Assembly year,
Die
Die
Die introduced
Set rifles
SetSeries
Setcalibers
$373.95
$9.95
$7.95
$30.95
$7.95
$30.95
$61.95
$45.95
$74.95
$71.95Precisioneered
$71.95
Caliber
produce
our
Reloading Dies.every
The Full
Length
.38-55 WIN & BAL
Caliber
With new
calibers
and rifles
introduced
year,
it The
is a
wonder
that
black
powder
cartridges
are
still
around!
416 BARRETT
14501
.40-60
WIN
(.408
BORE)
.38-55
&
BAL
Caliber
Sizer
Dieblack
is—
drilled
and
reamed
to—the 11857
dimensions
.25-20 WIN With
11850
— rifles
11856
9901 developed
11858 it90081
new
calibers
and
introduced
every
year,
is a9628
wonder
that
powder
cartridges
are
still
around!
The
Legacy
series
of dies
supports
these
legendary
metallic
.460
STEyR
27501
.40-65
SHILOH
SHARPS
BORE)
.38-55
& BAL
.40-60
WIN
(.408
BORE) (.408
over
theblack
years.
Then
each14656
die is hand
polished,
heat
treated
and
that
powder
cartridges
are
still
around!
The
.30-30 WIN wonder
14650
—
—
—
14657
9902
14658
90082
9628
Legacypowder
series
of
dies
supports
these
legendary
metallic
.40-70-2
1/2”
SHARPS
.40-60
(.408
BORE)STRAIGHT
.40-65
SHILOH
SHARPS
(.408
BORE)
black
cartridges
and dies
the
enthusiasts
that
then
repolished.
These
massive
are
designed
for use
withare
.50WIN
BMG
1-1/2”-12
30001
Legacy
series
of
dies
supports
these
legendary
metallic
.32 S&W LONG/.32
S&W the
—
—
21451
— 21456
21457
9903/9917
21458
90083
WINSHILOH
.40-65
SHARPSSTRAIGHT
(.408 BORE)
.40-70-2
1/2” SHARPS
black
powder
cartridges
the
enthusiasts
that
are9628 .405
AmmoMaster-2
or the and
AmmoMaster
Single
Stagerifles.
Press
with
shooting
original
or reproduction
black
powder
WINCHESTER
.40-70-2
1/2” SHARPS STRAIGHT
.405
WIN
powder
cartridges
and
the
enthusiasts
that
are9628 .45-60
.32 WIN SPL black
15750
—
—
15756
—
15757
9904
15758
90084
the
.50 BMG
Conversion
Kit
installed.
All
Dies
listed here
are
shooting
original
or reproduction
black
powder
rifles.
.45-75
WINCHESTER
.405 WIN
.45-60
original
reproduction
powder
manufactured
with
1-1/2”-12
Full
Set
.32-20 WIN shooting
—
18151or
—
18156thread.
— black
18157Length
9905Die rifles.
18158includes
90092 9628
.45-90-2.4”
SHARPS STRAIGHT
.45-60 WINCHESTER
.45-75
Cowboy dieS Legacy Series Dies
1-1/2˝-12 Dies
3-Die Roll
Full-Length
CrimpDie
Set
Sizer
3-Die
Roll
$66.95
$229.95
Crimp Set
Steel
Neck
SizerDie
Die
Sizer
Steel
$46.95
$229.95
Sizer Die
Expander
Trim
Die
Die
Expander
$24.95
$183.95
Die
—
23304
36504
19004
19204
19004
23304
30029
27530
23333
36533
19033
19233
19033
23333
30030
—
23358
36555
19258
23358
30065
3-Die
Roll
36504
$66.95
Crimp
— Set
19004
36504
$66.95
Steel
36533
$46.95
Sizer
Die
14530
19033
36533
$46.95
23608
23633
23304
23333
19204
19233
19804
19833
19204
19233
23608
23633
19904
19933
23608
23633
19804
19833
19333
19804
19833
19904
19933
Seat Plug aSSemblieS 19304
— .50 bmg
.45-100-2.6”
SHARPSSTRAIGHT
STRAIGHT
19404
19433
.45-75 WINCHESTER
19904
19933
.45-90-2.4”
SHARPS
19304
19333
.45-110-2
SHARPS
STRAIGHT
19504
19533
.45-90-2.4”7/8”
SHARPS
STRAIGHT
19304
19333
.45-100-2.6”
SHARPS
STRAIGHT
19404
19433
Caliber1/4”
.45-120-3
SHARPSSTRAIGHT
STRAIGHT
19604
19633
.45-100-2.6”
SHARPS
19404
19433
.45-110-2
7/8”
19504
19533
Seat
PlugSHARPS
Assy .50
BMG A-Max36804
(5/16-24) 36833
.50-70
GOV’T
.45-110-2
7/8”
19504
19533
.45-120-3
1/4”
STRAIGHT
19604
19633
.50-90-2
1/2”
SHARPS
.45-120-3
1/4”
SHARPS
STRAIGHT
19604
19633
.50-70
GOV’T
36804
36833
Seat
Plug
Assy STRAIGHT
.50
BMG Speer 19704
(5/16-24) 19733
.50-95
ExPRESS
21304
21333
.50-70 WINCHESTER
GOV’T
36804
36833
.50-90-2
1/2” SHARPS
STRAIGHT
19704
19733
Seat
PlugSHARPS
AssyExPRESS
.50
BMG A-Max20104
(5/8-18) 20133
.56-50
SPENCER
.50-90-2
1/2”
STRAIGHT
19704
19733
.50-95
WINCHESTER
21304
21333
.50-95 WINCHESTER
ExPRESS
21304
21333
.56-50
SPENCER
20104
20133
.56-50 SPENCER
20133
Line
1-866-735-623720104
Full Length Sizer Die with Expander-Decapping Unit and Seater
.32-40 WIN
32550
— Seater
— Plug.
32556
9904
32558
90084 9628
Die
with Bullet
Trim —
Die is32557
case hardened
to prevent
.357 MAG/.38 SPL
—
— cases
18256 to18257
18258 Die
90085
9628
damage
to —
the die18251
when filing
length.9906
Neck Sizer
sizes
only—the neck,
.38 S&W
20351 not the
— shoulder
20356 and
— body.
20357 9906/9916 20358 90086 9628
.38-40 WIN
—
35651
—
35656 — 35657
9907
35658 90087 9628
.38-55 WIN
—
36551
—
36556 — 36557 9908/9915 36558 90088 9628
.40-65 WIN .410" BORE
—
36651
—
36656 — 36657
9909
36658 90087 9628
Free
76SPL
.44 S&W RUSS/44
—
—
18651
— 18656 18657
9910 Toll
18658
90089Order
9628 rcbS.com
rcbS.com
.44-40 WIN
—
18851
—
18856 — 18857
9911
18858 90089 9628 n
54 l
rcbS.com
n
54 l
Expander
36555
$24.95
Die
—
23358
36555
$24.95
RollLock
Crimp
Seater
Die
Ring
Roll
Crimp
$29.95
$10.95
Seater
Die
Roll
Crimp
36538
$29.95
Seater
9629Die
19038
36538
$29.95
9629
23338
36538
19038
19238
19038
23338
9629
23658
23638
23358
23338
19258
19238
20955
19838
19258
19238
23658
23638
20955
19938
23658
23638
19838
20858
19338
19838
20955
19938
20858
19438
20955
19938
19338
20858
19538
19338
19438
19658
19438
20858$7.95 19638
19538
36858
2085809642 36838
19538
19658
19638
19758
1965809649 19738
19638
36858
36838
19758
21338
36858
36838
19738
20158
19738
1975890093 20138
21338
19758
21338
20158
20138
20158
20138
Decap
Decap
Unit
Assy
Decap
$9.95
$19.95
Unit
Decap
9619
$9.95
Unit
9840
9619
$9.95
9841
9619
9619
9838
9619
9619
9619
9619
9619
9619
9619
9619
9619
9619
9619
9619
9619
Trim
Die
Decap
TrimPin
$59.95
$6.95
Die
Trim
36565*
$59.95
Die
9602
—
36565*
$59.95
9602
23365*
36565*
—
19265*
—
23365*
9602
23665*
23365*
19265*
—
19265*
23665*
—
23665*
19365*
—
19465*
—
19365*
19565*
19365*
19465*
19665*
19465*
19565*
36865*
19565*
19665*
19765*
19665*
36865*
—
36865*
19765*
—
19765*
—
—
hell die answers
.222 REM
37012
37209
37014
.223 REM
37212
37109
37214
.223 REM
SMALL BASE
DIE
SPECIALTIES
-38862*
2014 38859*
ble die HUNTINGTON
bushing,
.223 WSSM
10512
10509
will first size and
WIN
37312
37309
5-S
tation Shell .243
P
lateS
g providedPlate
with
B
D
.243 WSSM Part
11612Plate
11609
Number
Size
eat the wadSizeand
.25 WSSM
12412
12409
ox?
Number
1
88801
Number
23
g and install the
.25-06
38962
38959
ed?
Number
88802
Number 24
n up into the
die 2
.260 REM
39012
39009
ers
s completed.
Number 3
88803
Number 25
6.5MMx55 SWEDISH MAUSER
38412
38409
ons
Number 4
88804
Number 26
.270 WIN SHORT MAG
31312
31309
to
Number 5
Number 27 37509
.270 WIN 88805
37512
eps
Number 6
Number 28 39059
.280 REM 88806
39062
d in
37214
Con
< TOC >
REF.
REFERENCE SECTION
10514
37314$39.95
alternate Seater PlugS — 1/4˝-28
Part
11614
Number
.50 Cal. 325 gr. Barnesx
12414
38964
88823
88824
F
d
$6.95
9663
6m
7mm Silhouette
9696
7m
.30 Cal Silhouette
9697
35
39014
88825
35
88826
35
38414
31314
88827
37514
88828
39064
Number 7
88807
7MM REM MAG
Number 30 37609
37612
88830
37614
Number 8
88808
7MM REM SA
ULTRA MAG
Number 31 31109
31112
88831
31114
E
or write RCBS for information.
41
alternate Seater PlugS — 1/2˝-20
25 Cal. 35 gr. Gold Dot
$6.95
90071
32 Cal. Wadcutter
G
32 Cal. 60 gr. Gold Dot
d
90014
Un
90072
5-Station Shell PlateS
$39.95
Shell Holder
Rack
Sm
of
357 SIG Plate
125 gr. Gold Dot
90073 Part
7MM STW 88810
39112
39114
Part
Plate
Number 10
Number 33 39109
88833
Size
Number
Size
Number
5-S
tation
S
hell
P
lateS
$39.95
La
gle
7MM
WIN
SHORT
MAG
31412
31409
31414
357
Cal
180
gr.
Silhouette
90019
Shell
Holder
Rack
Number
11
88811
Number
34 around in
88834
Do you
all of your
shell holders
rolling
one box?
e a regular
Fullkeep
Plate
Part
Plate 23
Part
Number 1
88801
Number
88823
se.
7MM-08 REM
37412
37409
37414
Size
Number
Size
Number
38 Cal. 125 gr. Gold Dot
90065
Number
12ever had trouble
88812
Number
35
88835 need?
Have
you
finding37712
the
shell
holder37714
mandrel
with
ankeep
Number 12
88802
Number 23
24
88824
ore
Do
you
all.30-06
of your
rolling
around
inyou
one box? 38 Cal. 158
Imp
SPGfLD shell holders
37709
Number
88801
Number
gr. Gold Dot
90066 88823
® Number 13
88813 Rack, youNumber
36
88836 holders
the X-Die
is
all
With
RCBS’s
Shell
Holder
can
keep
your
shell
Number 23
88803
Number 24
25
88825
SMALL BASE
39159*
Have you ever .30-06
hadSPGfLD
trouble
finding39162*
the shell
holder37714
you need? 9mm Cal.Number
De
88802
Number
88824
90
gr.
Gold
Dot
90060
Number
88814The Shell Holder
Number 37Rack has 12
88837
rimmingorganized
after
an 14and protected.
positions
Number 34
88804
Number 25
26
88826
.30-30Holder
WIN
37909your shell
37914 holders
De
With RCBS’s Shell
Rack, you37912
can keep
Number
88803
Number
88825
9mm
Cal.
115
gr.
Gold
Dot
90061
case.
The
ad
Thermometer
F Bullet
Mould
Handles88805
H Mou
Number
88815 MAGon each
Number
88838room
thatX-Die
hold 15
two
holders
post.38Rack
There
is also
to
.300 REM SA ULTRAThe
31212
31209 has 31214
RC
organized
andshell
protected.
Shell
Holder
12
positions
Number
5
Number
27
88827
®
4 Dot
88804
Number 26
9mm Cal.Number
124 gr. Gold
90062 88826
owth rate
asNumber
the
store
six Trim
Pro
Shell
Holders
as17612
well.
cover
16
88816
Number
88839 keeps
.300 REM
ULTRA
MAG
17609clear
17614
that
hold
two
shell
holders
onlead
each
post.39The
There
is also
room steel
to frames
Number
6
88806
Number
28
88828
Solid
with
extra-long,
premium
hardwood
handles
00°F
range
and
+/1%
accuracy,
our
thermometer
Be
kind
to
5 Dot
88805
Number 27
147 gr. Gold
90063 88827
el during
outsizing.
the
while
allowing
you
to
see
what39214
is stored
in 9mm Cal.Number
Number
17 and
88817Holders
Number
40
88840
®WBy MAG
.300dirt
39209clear
store
sixdust
Trim
Pro
Shell
as39212
well.
The
cover
keeps
Number
7gr. Conical
88807casting. One
Number
30 fits all
88830
for
comfort.
Perfect
for
home
bullet
size
our
at
the
optimum
temperature.
Large
numbers
out
your
ca
d dielead
neck
wall,
Number
6
88806
Number
28
88828
9mm
Makarov
95
90016
the rack.
Number
18 and
88818 allowing38912
Number
41 see
88841
.300dirt
WIN MAG
38909 what38914
out
the
dust
while
you to
is stored
RCBS®inbullet
d
onback.
a 1-1/2”,
glass-covered
face.
Six inch probe
works
RCBS® ha
Number
8gr. Gold Dot
88808
Number 30
31
88831
hed
Cases
9mmmoulds
Makarov
90only.
90064 88830
Number
7
88807
Number
.300
WIN
SHORT
MAG
30812
30809
30814
Number
19
88819
Number
42
88842
the
Therack.
Shell
Holder
RackAn
canadjustable
be mounted
on the wall or used on
Wit
Sof® an
accomplish
Pro-Melt
furnace
or pot.
6” handle
Number
88809
Number 31
32 $45.95
88832
inch,
then
40/10mmMould
155 gr. 89Gold
Dot
90067 88831
Number
88808
Number
80025
Bullet
Handles
BRITISH88820
39362
39364
Number 20 The .303
Number
43 39359
88843
Rel
the
bench.
wall
mount
spacing
allows
it
to
be
hung
off
of
burning
your
fingers.
srevent
of accuracy
or
Number
88810
Number 32
33
88833 80007
The Number
Shell21Holder.308Rack
can be mounted
on the wall37814
or used on 40/10mmNumber
WIN 88821
37812
165 gr. 910
Gold Dot
90074 88832
88809
Number
NumberThe
44 37809
88844
hea
standard
1”The
pegboard
hooks
as well.
support
legs angle
the
bench.
wall
mount
spacing
allows
it
to
be
hung
off
of
Number
11
88811
Number
34
88834
WIN SMALL BASE
39262*
39259*
37814
Lead Thermometer
$60.95
40/10mmNumber
180 gr. 10
Gold Dot
90068 88833
88810
Number 33
Number 22 out .308
88822
Number
45
88845
Dec
the
bottom
for
wall
mounting
or
the
top
up
for
bench
use.
standard 1” pegboard
hooks as well.
support38714
legs angle 10mm Round
8MMx57 MAUSER
38712 The38709
Number
12
88812
Number 34
35
88835
t.
Nose11
90039 88834
Number
88811
Number
Additional
Shell
Holder
Racks
can
be
snapped
together
if
more
Pow
For
2000 Progressive
Press,
AmmoMaster
Piggyback,
the Pro
bottom
out .325
forWINwall
mounting
or
top
up for31614
bench use. 40-Cal 400
SHORT
MAG
31612theAuto,
31609
Number
13
88813
Number 35
36
88836
Black 12
Powder
90042 88835
Number
88812
Number
shell holderShell
storage
is needed.
Piggyback-II
and
Piggyback-3
pro
Additional
Holder
be snapped
if
more
.338
REM ULTRARacks
MAG& -4. can 17712
17709 together
17714
I
Bull
G
Neck
Expander
Dies
for
Cast
Rifle
Bullets
Number
14
88814
Number
37
88837
44 Cal. 240
gr. Silhouette
90031 88836
Number
13
88813
Number 36
For
Pro
2000,
AmmoMaster
Auto, Piggyback,
Piggyback
II39314
and
NOTE:
The
Piggyback,
Piggyback-3
otX-Full
Mould
.338 WINPiggyback-II,
MAGneeded. and39312
39309 Progressive
shell
holder
storage
is
9461
Shell
Holder
Rack
he
Length
Number
15Dot
88815
Number 37
88838
44 Cal.
270
gr. Gold
90075 88837
Piggyback—3
& —4
Progressive
Presses
Number
14
Presses
are
toULTRA
an overal
cartridge
of 2.260”.30914 To eliminate
deforming
the base88814
and shavingNumber
lead38 off the
RCBS® Bu
.375 REM
MAG
30912length30909
u already
own
a restricted
®39
Number
16
88816
Number
88839
9461
Holder
Rack them
44/45
SWC
90033
to four Check
ingots
at Shell
oncelength
and before
cool
quickly
with this
cartridge
ordering
shell
plates.
The
Piggyback-4
and most o
sides of your lead
rifle
Number
15 bullets during
88815 seating. RCBS
Number 38strongly
88838
gth Sizer Die, as
45 Cal.
185
gr. Gold
90069 88839
Number
17DotNeck Expander
88817
Number
40
88840
cessory.Progressive
It’s perfect
forismelting
scrap cartridge
lead and
Press
restricteddown
to an overall
length of 3.340”.
temperatur
recommends
using
our
Die. In Number
one 39
step, the
Number
16
88816
Exp
a
uto
4
x
4
S
hell
P
lateS
$45.95
Note:
theuse.
Piggyback, Piggyback II and Piggyback—3 Progressive
alloys for
future
45 Cal.die
200
gr.
Barnex
90034 88841
Number
18 xPB the neck
88818
Number
41the case
rated comp
neck expander
expands
and slightly Number
flares40
Number
17
88817
88840
Plate
Part
Plate
Part
and
Presses
are
restricted
to
an
overall
cartridge
length
of
2.260”.
Size
Number PlateSSize
Number
a
uto 4x4 Shell
$45.95
45 Cal.
230
gr. Gold
90070 88842
Number
19Dot cases. 88818
88819
Number 41
42
a blend any
of
mouth of your
bottle
neck
Number
18
Number
88841
Ingot Mould
$22.95
Check
before
Shell Plates.
Plate
Part length
Plate 18 ordering
Part
Number cartridge
1
87601
Number
87618
45 Cal. 500
gr. Black
90080 88843
Works fine
Number
20 Powder Silhouette88819
88820
Number 42
43
Size
Number
Size
Number
or
D
Number
19
Number
88842
39800 Neck Expander Body
$24.95
Number 12
87602
Number 18
19
87619
Number
21 Plug
88821 Application) Number
Number 43
44 $5.95
88844 80008
Number
87601
Number
87618
Alternate
Seater
Plugs
(Special
Number
20
88820
88843
39801
Neck
Expander
Rod
Number 23
87603
Number 19
20
87620
Number
22
88822
Number
45 $11.95
88845
These through-the-top
seater plugs
(1/2”-20 thread) are
available
separately88844
and
Number
87602
Number
87619
.com
rcbs.com
80009
Neck Expander
Plug 21
(see chart)
Number
88821
Number
44
6
Number 9
l
Number 34
Number
Number 46
Number
ad Dipper
Number 67
Number
7MM REM ULTRA
MAG
88809
87604
87603
87606
87604
17812
Number 32 17809
Number 20
21
Number
Number 21
23
Number
17814
88832
87621
87620
87623
87621
87607
Number 23
24
87624
87606
Number
87623
Number
9
87609
Number
25
87625
Numberfor
7 easy
87607scooping
Number 24
87624
apacity bowl
and stirring.
The lead
Number
10
87610
Number
26
87626
Number
9
87609
Number
25
87625
s a tapered
pouring
spout to
fit sprue
holes and has a
Number
11
87611
Number 26
27inches.
87627
wood grip.
Overall
length:
11-1/2
Number
10
87610
Number
87626
Number 12
Number 11
Lead Dipper
Number 15
Number 12
Number 15
16
Number
Number 16
17
Number
rcbs.com
n
Number
17
Auto
45For
l
87612
87611
87615
87612
87616
87615
87617
87616
Number 27
28
Number
Number
30
Number 28
87628
87627
87630
87628
Number 32
87632
Number 30
32
Number
$28.95
87632
87630
4x487617
and 4x4 Presses
39811
39859
39813
39861
.284”
39815
39863
.308”
39817
39865
.309”
39819
39867
.310”
39821
39869
10
.311”
39823
39871
10
.321”
39825
39873
.323”
39827
39875
.338”
39829
39877
Size and
Lube-A-Ma
the handle
A fingertip
A-Matic—2
“must-hav
39830
39878
(Die and to
$13.95
Part
Number
# holderS
Part
Number OBJECTS
#
e
xtended
Shell
$13.95
INg LEAD
AND CASTINg
LEAD
WILL
2
08960
Number OTHERS
#
Number AREA# TO LEAD,
SE yOuPart
AND
INPart
THE
08953
3
08968
18
08952
2
08960
Piggyback—3
& —4 Progressive
2000, d
AmmoMaster
Auto,Presses
Piggyback, Piggyback II and
NFor
eck Pro
expaNder
ies
J Bull
Piggyback—3 & —4 Progressive Presses
Expander
Complete
Plug Only
Die
Bullet cast
Note:
II and Piggyback—3 Progressive
$30.95 Piggyback$11.95
Bullet
Diameter the Piggyback,
This comp
.224”
39803
39851
Pressesthe
arePiggyback,
restricted to
an overallII cartridge
length of 2.260”.
Note:
Piggyback
and Piggyback—3
Progressive
entertainin
.228”
39805 before ordering
39853 Shell Plates.
Check
cartridge
length
Presses are restricted to an overall cartridge length of 2.260”.
preparation
.243”
39807 before ordering
39855 Shell Plates.
Check cartridge length
99908
.257”
39809
39857
.277”
WARNING
08952
l
.264”
For
4x44x4
and and
4x4 Presses
see reference
ForAuto
Auto
4x4 Presses
chart on page 74-75.
extended Shell holderS
manufactured to fit bullets shown in the chart above. They are not furnished with
n 57
Number
22 dies. Seater88822
88845
the die sets
or seater
plugs with 1/4”-28 Number
thread 45
design, are for use
with older RCBS dies and can be made on a special order basis. Call or write
RCBS
information.
ForforPro
2000, AmmoMaster Auto, Piggyback, Piggyback II and
H IS kNOWN
TO 36 CAuSE
08956
08995 BIRTH 18
45DEFECTS,
08953
08968
R REPRODuCTIVE
AND
CANCER.
SEE
08956 Holders,
6HARM
08995
45
Shell
Extended
Shell Holders
& Shell Holder Rams
If yourON
shellREDuCINg
holders don’t securely
grip the shell
and firmly fit into the press
RuCTIONS
ExPOSuRE
SuPPLIED
.348”
rcbs.com
K Lub
during reloading, you’re bound to have headspace and sizing problems. At RCBSn 45
.358”
39831
39879
l
for sizer di
rcbs.com
PRODuCT.
they manufacture shell holders to the industry’s tightest tolerances, using only
.375”
39833
39881
n 45 l
80040
the finest steel.
.416”
39835
39883
86880
Shell Holder Rams and Adapters permit the use of RCBS Shell Holders on the
presses indicated. Clip spring holds Shell Holder in place, yet allows rotation to
Important: Expander-Decapping Units, Decapping Units and all Decapping Pins
any convenient angle.
are available through RCBS Distributors and Dealers. All other replacement
parts
rCBS.Com
Special Order Shell Holders and Extended Shell Holders are available
should be ordered from RCBS Customer Service.
n
61
l
(see page 29, 30.)
Toll Free Order Line 1-866-735-6237
77
$61.95
$9.95
$44.95
$68.95
$95.95
$68.95
$95.95
$56.95
$80.95
T/CCaliber
Seater
•21830
Blackoxidefinish
.17
HORNET.243 Win.
21801
21829 $42.95 —
—
—
—
—
—
.22 K-HORNET
26201
26229 $54.9526202 *
—
—
26238
9802
26265*
SB T/C
Die Set .264 LBC-AR
•26230*
Notforusewithprogressivereloadingpresses
REM JET
10401
10429
10430* >
—
—
10438
9800
10465*
< TOC
REF.
T/C .22
Seater
.264
LBC-AR
$42.9510402*
HUNTINGTON
- 2014
REFERENCE
SECTION
.22 SAVAGE
HI POWER
33801
33829
33802*
33830*
—
—
33838 DIE SPECIALTIES
9803
33865*
SB T/C
Die RIMMED
Set 6.5 Creedmoor
5.6MMx50
26301
26329 $54.9526302*
26330*
—
—
26338
9802
26365*
x 28x(fN)
11701
11729 $42.95 —
—
11731
11738
9802
11765^*
ComPetition
dieS11703 Seater
d
ie Creedmoor
Chart
T/C 5.7
Seater
6.5
Alternate
(Special9806
Application)
.257 ROBERTS IMP 40
32201 X
32229
32202*
32230*
—
— Plugs
32238
32265*
X
X
SB T/C
Die Set .260 Rem.
$54.95 —
6MMx45
28929
28930
28903
28931
—
—
—
Mandrel
Full-Length
Full-Length 28901
Competition Competition
Competition Competition Competition Competition
Assembly
Sizer
Die
Die
Set
LBC-AR.260 Rem.
16401
16429 $42.95 —
16430through-the-top
16403
16431
—Extended
—
These
seater
plugs
(1/2”
-— 20
hT/C 264
Seater
Bullet are
Seaterthread)
Plug
Decapping
Seater
Full-Length Full-Length
$11.95
$53.95
$62.95
Caliber
C
B
.280 ACKLEy IMPROVED
17001
17029
—
17030
—Die Set
—
—
Guide
Pin — Assembly
Shell Holder
Die
Sizer —
Die
manufactured
to fit bullets
shown
in the
lSB T/C
.204Set
RUGER6.8mmx43 Rem. 10312
10314$54.9527802* available
Die
SPC 2780110309
$8.95
$2.95
$14.95
$87.95 27838
Caliber 27830* separately
6.5MM-06
27829
—$135.95and$51.95
—
9807 $13.95
27865*
.204
RUGER
39401+
39429
39438+
38260
9608
38150
38201
REM
MAG.
33401
33429
—
—
—
—
33438
9807
—
chart
below.
They
are
not
furnished
with
the
die
sets
or
seater
cT/C 6.5MM
.22 HORNET
38309
38314$42.95
Seater
6.8mmx43 Rem. SPC38312
6.5MM-284 WIN
28701
28729
—
—
—38301+
—
28738
9807 38151
—
.22 HORNET
38329
38338+
38262
—
38202
dies.
Seater plugs
with 1/4”
- 28
thread
design,
are for use
with
rSB T/C
.22-250
37112 3290137009
37114$54.95 —
SetREM
7.62mmx39
6.5MMDie
CREEDMOOR
32929
32930
—
32931
32938
9807
—
®
.222 REM
37029
37038+12938
9608—order
38151basis.
38202
older
RCBS dies
,T/C 6.5MMx47
and can
be made
on 38260
a special
Call
LAPUA
12929
12930
—37001+
—
—
.2207.62mmx39
SWIfT
38812 1290138809
38814$42.95 12902
Seater
6.5MMx54 MANNLICHER-SCHOEN.
27701
27729
27702* or
27730*RCBS for
—37201+
—
9807 38151 27765*
.223 write
REM
37229
37238+27738
38260
9608
38202
information.
sSB T/C
.222Set
REM .308 Win.
37012
37209
37014$54.95
Die
reloadinG
6.5MMx57 MAUSER
32801
32829
32802* .22-25032830*
—37101+
—
32838
9807 dieS
32865*
REM
37129
37138+
38253
9608
38151
38202
.223.308
REM Win.
37212 2790137109
37214$42.9527902*
27929
27930*
—
—
27938
9807
27965*
T/C 6.5MMx68S
Seater
.243
WIN
37301+
37329
37338+
38253
9608
38152
38205
7MM BMatch
R REM
3410138859*
34129
34102* C 34130*
—
—
34138
9809
34165*
Medal
Dies
Cowboy
Dies
.223
REM
SMALL
BASE
38862*
37214
Die Set .30 Rem. AR
$54.9526702*
,SB T/C
7MMx65 RIMMED
26701
26729
—39501
—
9809 38153 26765*
.25-06 26730*
39529
39538 26738 —
9609
38206
.223.30
WSSM
10514
Seater
Rem.
AR series10512
$42.9525102* Cowboy
MAUSER
(7.63MM
MAUSER)
2510110509
25129
25130*Action Shooting
—
25138
9813
25165*
dT/Cof.30
is—
one of
the
fastest
growing
ud
the
Gold
Medal
of neck
bushing
rifle
6.5MMX55 SWEDISH
MAUSER
38401+
38429
38438+
38252
9609
38154shooting
38207
.30
REM
29201
29229
29202*
29230*
—
—
29238
9812
29265*
.243Set
WIN .300 AAC BLK
37312
37309
37314
$7.95
alternate Seater
PlugShave
— 1/4˝-28
SB T/C
Die
$54.95 — sports.
h
must
speed
accuracy,
while
ngeable
neck bushing die
has been25329
used
.270 WIN — Shooters
37529
37538
38208
.30 REMdiameter
AR
25301
—37501
25331
25338 —and 9609
9812 38155
—
.243
WSSM AAC BLK
11612 2240111609
11614
.50
Cal.
325
gr.
Barnesx
T/C
Seater
.300
$42.95
.300
AAC
BLK
22429
—
22430
—
—
—
—
—
dand long-range precision shooters for years. The
recreating
the spirit
of the
1880s.
Guns,
and9663
ammo
7MM-08 REM
37401+
37429
37438+
38253costumes
9609
38156
38209
.30-338
WIN
MAG.30-06 Spring. 12412 2940112409
29429
—
—
29438
9812
29465*
.25
WSSM
12414
SB T/C
Die
Set
$54.9529402* must
7mm29430*
Silhouette
9696
e
fit
the period.
Making
ammo
that
fits
Old West
image
7MM REM
MAG
37601
37629
37638
— the
9609
38156 15065*
38209
zing
dies
feature
a self-centering changeable
neck
.300
H&H
MAG
15001
15029
15002*
15030*
—
—
15038
9812
.25-06
38962
38959
38964
Seater
.30-06
Spring. set the
.30 Cal
Silhouette
9697
NORMA
MAGprecisely
15601
15629 $42.9515602* means
15630*
—38501
—jacketed
9812
15665*
7MMX64
BRENNEKE
38529
38538 15638
—
9609
38209 It
eT/C .308
loading lead
bullets,
bullets
are
not38156
allowed.
allows
you
to
amount
of tension
.260Set
REM .338
39012 2910139009
39014
7.5MMx54
fRENCH
MASFederal
29129
29130*
—
—
29138
9832
29165*
SB T/C
Die
$54.9529102* also
7.5MMX55
SCHMIDT-RUBIN
38601
38629must38638
—
9609
38157 properly
38212
means
that
the
bullets
be
designed
to
work
Gold
Medal
rifle
dies
are
available
in
full-length
.32-40 WIN
32529
32502*
32530*
—
—
32538
9816
32565*
6.5MMx55
SWEDISH MAUSER
38412 3250138409
38414
T/C styles.
Seater
.338
SPRINGFIELD
37729
37738 32638
—
9609
38157 Cowboy
38212
8MM-06
32629 $42.95
32602* in.30-06
32630*
—37701
—
9817
32665*
lever-action
rifles
and single-action
revolvers.
RCBS’
ng
TheFederal
Gold Medal seat32601
dies feature
a
.270
WIN
SHORT
MAG
31312
31309
31314
8MMx68S MAGNUM
34401
34429
34402* .308 WIN34430*
—37801+
—
34438
9817 38157 34465*
37829
37838+
38253
9609
38212
Dies 16730*
are built to —slightly different
dimensions
than
our regular
djustable,
free floating and self-centering
bullet
.338-06/.338-06
16729
16702*
—
16738
9828
16765*
.270 WIN A-SQUARE
37512 1670137509
37514
8MMX57
MAUSER
38729
38738 13038 — seating
9609
38159$7.95
38214
to
allow optimum
sizing,
crimping
m with
convenient
bullet-loading13001
window. 13029
.338a
NORMA
MAG
— dies
13030
—38701PlugS
—— expanding,
9828 and
—
a
lternate
S
eater
1/2˝-20
.280 REM
39062
39064
.348 WIN
3360139059
33629
— needed
—to load great
—
—
33638
9819
33665*
lead
bullet
ammo.
25
Cal.
35
gr.
Gold
Dot
90071
Competition
extended
required required
for
bullet seating
is included.
+Competition
extended
shell
for9820
bullet
seating
33729
33702* (+)
33730*
— shell holder
— holder
33738
33765*
.350 REM
MAG
7MM
REM MAG
37612 3370137609
37614
“O” ring style
.370 SAKO
MAG/9.3x66
1420131109
14229
— (*)
— only.
—
14238
9821
—
32 Cal.—
Wadcutter
90014
is Current
included.
7MM REM SA ULTRA MAG
31112
31114
9.3MMx74 RIMMED
34601
34629
7MM REM ULTRA MAG
17812 1790117809
17814
.376 STEyR
17929
.378 WBy
MAG
33029
7MM
STW
39112 3300139109
39114
A.400 (Groups
CORBON
17501
17529
A,MAGD & Safari)
7MM
WIN
SHORT
31412
31409
31414
RUGER
13101
13129
l .416
.416 REM
MAG REM
2270137409
22729
7MM-08
37412 pistol
37414
e
for
bottleneck
type
rifle
and
cases,
and
n .416 RIGBy
22801
22829
.30-06
SPGfLD
37712
37709
37714
ll-Length
Sizer
Die
with
Expander-Decapping
Unit,
.460
WBy
MAG
33101
33129
l
Sets
34602*
17902*
33002*
—
—
22702*
22802*
33102*
9821
34665*
34638
90072
17938
9822
17965*
33038
9822
33065*
90073
B
17538
9835
17565*
Roll Crimp90019
3-Die 3-Die Carbide Steel Carbide
3-Die
357 Cal
180
gr.
Silhouette
13130
— Roll Crimp Roll—
13138Expander Expander
9827 Seater Seater
— Decap
Crimp Sizer Sizer
Full-Length
Plug
Die
Assembly
Die
Die
Die
Set
Set
Set
22730*
—
22738
9827
22765*Unit
38 Cal.
125 gr. Gold $73.95
Dot— $73.95
90065
$7.95
$46.95 $64.95
$78.95
Caliber
22830*
—
—
22838$31.95
9825 $31.95 $7.95
22865*$9.95
38 Cal.
158 gr. Gold Dot
.25-20
WIN
11850
—
—
11856 33138
— 11857
9901
90081
33130*
—
—
9826 11858 90066
33165*9628
34630*
32 Cal. 60 gr. Gold Dot
—
—
17930*“o” ring—
*Current
style only.—
—
—
357 33030*
SIG 125
gr. Gold Dot
Cowboy
d
ieS
—
—
—
rcbs.com
Die
.30-30
WINCal. 90 gr. Gold14650
—
—
14658 90060
14656 — 14657
9902
90082 9628
9mm
Dot
n with .30-30 WIN
37912
37909
37914
n
55 l
.32
S&W
LONG/.32
S&W
—
—
21451
21457
21458
—
21456
9903/9917
90083 9628
9mm
Cal.
115
gr.
Gold
Dot
90061
e
.300 REM SA ULTRA MAG
31212
31209
31214
.329mm
WIN SPL
15750
—
—
15758 90062
15756 — 15757
9904
90084 9628
Cal. 124 gr. Gold
Dot
e
REM ULTRA
17609
17614 shell holder.
not in.300
stock,
allowMAG
4-6 weeks for 17612
delivery. ^Includes
extended
.32-20
WINCal. 147 gr. Gold—Dot 18151
—
18158 90063
18156 — 18157
9905
90092 9628
9mm
.R *If
Series
Dies
B Competition Rifle Dies
.300 WBy
MAG
39212
39209
39214
.32-40
WIN
32550
—
—
32557
32558
32556
—
9904
90084 9628
,
9mm Makarov 95 gr. Conical
90016
MAG
38912
38909
38914
rouP.300
e WIN
ts forgSets
the
progressive
a Small
Base
These
for —
everybody.
They go
and beyond
our 90085 9628
.357dies
MAG/.38aren’t
SPL
—
18251
18258
— above
18256 18257
9906
Die
(Groups reloader.
A 3-Die
& D) It features
9mm Makarov 90 gr. Gold Dot
90064
3-Die
3-Die 30809
WIN SHORT
MAGCrimp seating
30812 die.
30814
die and a.300
new
Taper
Precision
Dies. If you’re
a competitive
marksman
measuring
.38 S&W Steel
—
20351
—
20358 90086 9628
20356Taper
—Crimp20357 9906/9916
Roll Crimp
Carbide
Roll
CarbideThis combination
Carbide
nes size .303
Trim
Decap
Seater
Expander
Sizer 155 gr. Gold
Sizer
Crimp
Taper Crimp 39362 Roll Crimp39359
® Seater
40/10mm
Dot
BRITISH
39364
theforneck
of case
(not
theshooters.
shoulder
reloadingonly
easier
AR-style
or semi-auto
The Diesuccess
inDiefractions of
Dies35658
are90067
Die 9628
Unit
Die
Die— RCBS
Die a millimeter,
Set
Set
Set
.38-40 WIN
—
35651
35657
35656 Competition
—
9907
90087
r Caliber
$61.95
$9.95
$40.95
$31.95
$51.95 165 gr. Gold
$70.95
$87.95
$107.95 37809
$107.95
.308
WIN
37814
40/10mm
Dot
90074
Base
sizer
that
the37812
cartridge
will Die
rechamber.
for you.
NOTE:
Competition
dies$40.95
do not require
neck bushings.
enough
toguarantees
snugly hold
the
bullet.
Neck
Sets
.30-06 SPGfLD
SMALL BASE
Bullet
Seater
Plug.
.25 AUTO (.25 ACP)
39162*
21015
39159*
—
37714
—
per .327
Crimp
Seater
is Expander-Decapping
more
when
case
.308S&W
WIN L/H&R
SMALL
BASE
39262* 21412
39259*various
eck
Sizer
Die
with
Unit—37814
and
fed/.32
MAG
21415forgiving
.32-20
WIN
—
—neck
18105
serare
loaded
atMAUSER
the same
time.
Case
bulges
8MMx57
38712
38709crimp
38714
Die
with
Seater
Plug.
Neck
Sizer
Dies
are
also
9MM fAR
—
—
23210**
uckled
shoulders
aremost
virtually
eliminated
when
Taper
.325 WIN SHORT MAG
31612
idually.
Available
in
9MM MAKAROV
23015calibers.
— 31609
—31614
21037
21437
—
—
23037
20237
—
.38-55 WIN—
—
21049
36551
——
36556 21062
— 36557 9908/9915
9621 36558 90088
21065*+9628
s
c
b
f
N
S
D
B
c
S
D
Th
pr
Si
ov
th
th
wi
ma
Fu
Di
da
siz
1
Ca
4I
.4D
.5D
R
S
Ca
SW
SR
Sh
40/10mm
180
gr.
Gold
Dot a36651
90068
21453
21462
9622 3665820165/21365*+∆
D
•.40-65
Full-length
sizer
with
raised21442
expander
WIN—.410"
BORE
—
—
36657 extra
36656ball
—allowing
9909
90087 9628
18132
18153
18139
—
9622
18165*+
10mm
Round
Nose
90039
leverage
for
smooth,
effortless
neck
expansion
(.204
and
.25
cal
.44 S&W23232
RUSS/44 SPL
—
—
18651
— 18656
9910
—
—
23262 18657
9622 18658 90089
— 9628
P
doWIN
not
feature
a 23053
raised
expander
—400
——ball)18856 23062
9622 18858 90042
23065*+9628
40-Cal
Black Powder
.44-40
—
18851
— 18857
9911
90089
ng is.38
used
with
cannelured
bullets.
p
COLT.338
SUPER
AUTO/ACP
20215
— 17709
—17714
—
20252
— die neck and
20262body
9622
20265*+
REM
ULTRA
MAG
17712
•.4544
Maximum
concentricity
between
Cal.
240 gr.COLT
Silhouette
S&W
SCHO/.45
—
—
19151
— 19156
90090
the following
pages. — 39312 — 39309
(1)
35605
35632
35653
35639
— 19157 9912/9913
9622 19158 90031
35665*+9628
.338 WIN MAG
39314
• Seater
die with micrometer
for
super accurate
bullet seating
h .38-40 WIN
44 Cal.
270For
gr. Gold
US GOV'T
— lead
20951
90091 9628
** 9mm FAR
is a steel 30914
sizing die with taper.45-70
crimp.
useDot
with
bullets—only. 20956 — 20957 9914 20958 90075
depth 1:
in increments
of 0.001”
.375be
REMavailable
ULTRA MAG from stock.30912
30909
a * May not
44/45
SWC
90033
+ Requires extended Shell Holder, not included. ∆ Not for use with .327 Fed •Mag.
Bullet inserts through a side window instead of bottom of die
s
S
Dies
Cal.
185bullet-seating
gr. GoldDies
Dot
90069
Safari
• 45
Special
guide ensures correct bullet alignment
Sets (Groups B, C, E, Legacy & XNeck
Safari)
E
bushings are
before
and
legaCy
erieS
dieSseating
45
Cal. S
200
gr. after
Barnes
xPB
90034
®
Series
Dies
notstraight-wall
included with
Straight
outshell
of the
RCBS
at
a reduced
a
ed and Legacy
developed
the 3-Die
Sets for
Trim
Decap
Rolllisted
Crimp
Expanderand
Steel Order
3-Die
RollSpecial
ar
dieS
Ca
•
Extended
holder
for
shorter
cartridges
45 Cal. 230 gr. Gold Dot
Unit 90070 Die
Seater Die
Die
Sizer Die
Crimp Set
these dies and must
price.
The
Safari
Series
represents
cartridges
typically
used
for
a
$59.95
$9.95
$29.95
$24.95
$46.95
$66.95
Caliber
.4
l cases.
In calibers
the 3-Die
and
expanding
• 45
Black
oxideBlack
finish
With new
andSet,
riflessizing
introduced
every
year, it is a
be ordered
sepaCal.
Powder Silhouette
.38-55
WIN 500
& BALgr.game
36504 These
36533featured
36555 calibers
36538
9619 90080
36565*
Taper
Small
dangerous
in
Africa.
were
chosen
o
•
Not
for
use
with
progressive
reloading
presses
that black
cartridges
are
still
around!
The
onewonder
in separate
dies.powder
The
3-Die
Set
has
a
Sizer
Die
.4
Crimp
Base
rately. See page 79.
.40-60 WIN (.408 BORE)
19004
19033
23358
19038
9619
—
®
®
Seater Die
Die Set
based
onSHARPS
production
, Ruger
others23365*
that
Legacy
series ofDie
dies
supports
legendary
metallic
$43.95these
Caliber
.40-65 SHILOH
(.408 BORE) rifles
23304 from
23333 CZ 23358
23338and 9619
g Unit,
Expander
for$56.95
expanding
and
belling
the
.4
neck die bushings >>
.40-70-2
1/2” SHARPS
STRAIGHT African
19204 hunting
19233 classics.
19258
19238
9619
19265*rcbS.co
.204
RUGER
black
powder
cartridges
and10362
the
enthusiasts
that are
offer
these
timeless
nd a
Seater
Die with
Roll10307
or Taper
Crimp
and Bullet
.4
.405 WIN
23608
23633
23658
23638
9619
23665*
.223 REM./5.56MMx45
11107
11162 black powder rifles.
shooting
original
or
reproduction
n 57.5
for seating and crimping the bullet.
.45-60.500
WINCHESTER
19804Gibbs
19833
20955 on19838
9619
—
The
Jeffery
and
.505
are
made
1”
die
bodies
and
ComPetition
dieS
6MMx45
28907
28962
.45-75 WINCHESTER
19904
19933
20955
19938
9619
—
.243 WIN.
11407
11462
.264 LCB-AR
16407
16462
6.5 CREEDMOOR
32907
32962
.260 REM.
12807
12862
6.8MMx43 REM. SPC
13307
13362
7.62MMx39
35007
35062
.308 WIN.
15507
15562
.30 REM. AR
25307
25362
.300 AAC BLK
22407
22462
.30-06
14807
14862
.338 FEDERAL
17307
17362
78
require
press
adapter19304
bushing
(not included).
.45-90-2.4”a
SHARPS
STRAIGHT
19333
20858
19338
9619
38150
36838
38201
9619
21338
38151
9619
38202
Competition 20858
Competition
.45-100-2.6” SHARPSCompetition
STRAIGHT Competition
19404
19433
Extended Decapping
Seater
Full-Length Full-Length
.45-110-2 7/8” SHARPSDie
STRAIGHT
19504 Die 19533
Pin
Shell Holder 20858
Sizer Die
Set
$2.95
$14.95 19658
Caliber.45-120-3 1/4” SHARPS$139.95
STRAIGHT $53.9519604 $90.95 19633
.204 RUGER
39401+
3942936804 39438+3683338260 36858
9608
.50-70 GOV’T
.22 HORNET
38301+
3832919704 38338+1973338262 19758
—
.50-90-2 1/2” SHARPS STRAIGHT
.50-95 WINCHESTER ExPRESS
.222 REM
37001+
3702921304 37038+2133338260 19758
9608
.56-50 SPENCER
20104
20133
20158
.223 REM
37201+
37229
37238+
38260
9608
Competition
19438 Competition
9619
Bullet
Seater Plug
19538
9619
Guide
Assembly
$8.95
$13.95
19638
9619
38151
19738
20138
38151
38202
9619
9619
38202
19365*
19465*
19565*
19665*
36865*
19765*
—
—
.5
.5
*R
No
to
rcbS.com
Series Dies
37101+
37129
37138+
38253
9608
38151
38202
rcbS.com
.243
WIN new calibers and
37301+
37329
37338+ year,
38253
9608
38152black 38205
With
rifles introduced
every
it is a wonder
that
powder cartridges 49
.25-06
39501
39529of dies
39538
9609
38153
are still
around!
series
supports—these legendary
metallic38206
black powder
n
54
l The Legacy
cartridges
the enthusiasts
that are shooting
original
or9609
reproduction
6.5MMX55
SWEDISHand
MAUSER
38401+
38429
38438+
38252
38154 black
38207powder rifles.
Legacy
.22-250
REM
n
.270 WIN
37501
37529
Toll Free Order
Line 1-866-735-6237
7MM-08 REM
37401+
37429
37538
—
9609
38155
38208
37438+
38253
9609
38156
38209
7MM REM MAG
37601
37629
37638
—
9609
38156
38209
7MMX64 BRENNEKE
38501
38529
38538
—
9609
38156
38209
l
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
Steel neCk buShingS
Neck
Bushing
Diameter
Neck
Bushing
Diameter
Part
Number
$14.95
Part
Number
Neck
Bushing
Diameter
Part
Number
Neck
Bushing
Diameter
Part
Number
reloadinG dieS
REF.
REFERENCE SECTION
Coated neCk buShingS
Neck
Bushing
Diameter
Part
Number
Neck
Bushing
Diameter
$25.95
Neck
Bushing
Diameter
Part
Number
Part
Number
Neck
Bushing
Diameter
Part
Number
0.185
81500
0.231
81546
0.277
81592
0.323
81638
0.185
81700
0.231
81746
0.277
81792
0.323
81838
0.186
81501
0.232
81547
0.278
81593
0.324
81639
0.186
81701
0.232
81747
0.278
81793
0.324
81839
0.187
81502
0.233
81548
0.279
81594
0.325
81640
0.187
81702
0.233
81748
0.279
81794
0.325
81840
0.188
81503
0.234
81549
0.280
81595
0.326
81641
0.188
81703
0.234
81749
0.280
81795
0.326
81841
0.189
81504
0.235
81550
0.281
81596
0.327
81642
0.189
81704
0.235
81750
0.281
81796
0.327
81842
0.190
81505
0.236
81551
0.282
81597
0.328
81643
0.190
81705
0.236
81751
0.282
81797
0.328
81843
0.191
81506
0.237
81552
0.283
81598
0.329
81644
0.191
81706
0.237
81752
0.283
81798
0.329
81844
0.192
81507
0.238
81553
0.284
81599
0.330
81645
0.192
81707
0.238
81753
0.284
81799
0.330
81845
0.193
81508
0.239
81554
0.285
81600
0.331
81646
0.193
81708
0.239
81754
0.285
81800
0.331
81846
0.194
81509
0.240
81555
0.286
81601
0.332
81647
0.194
81709
0.240
81755
0.286
81801
0.332
81847
0.195
81510
0.241
81556
0.287
81602
0.333
81648
0.195
81710
0.241
81756
0.287
81802
0.333
81848
0.196
81511
0.242
81557
0.288
81603
0.334
81649
0.196
81711
0.242
81757
0.288
81803
0.334
81849
0.197
81512
0.243
81558
0.289
81604
0.335
81650
0.197
81712
0.243
81758
0.289
81804
0.335
81850
0.198
81513
0.244
81559
0.290
81605
0.336
81651
0.198
81713
0.244
81759
0.290
81805
0.336
81851
0.199
81514
0.245
81560
0.291
81606
0.337
81652
0.199
81714
0.245
81760
0.291
81806
0.337
81852
0.200
81515
0.246
81561
0.292
81607
0.338
81653
0.200
81715
0.246
81761
0.292
81807
0.338
81853
0.201
81516
0.247
81562
0.293
81608
0.339
81654
0.201
81716
0.247
81762
0.293
81808
0.339
81854
0.202
81517
0.248
81563
0.294
81609
0.340
81655
0.202
81717
0.248
81763
0.294
81809
0.340
81855
0.203
81518
0.249
81564
0.295
81610
0.341
81656
0.203
81718
0.249
81764
0.295
81810
0.341
81856
0.204
81519
0.250
81565
0.296
81611
0.342
81657
0.204
81719
0.250
81765
0.296
81811
0.342
81857
0.205
81520
0.251
81566
0.297
81612
0.343
81658
0.205
81720
0.251
81766
0.297
81812
0.343
81858
0.206
81521
0.252
81567
0.298
81613
0.344
81659
0.206
81721
0.252
81767
0.298
81813
0.344
81859
0.207
81522
0.253
81568
0.299
81614
0.345
81660
0.207
81722
0.253
81768
0.299
81814
0.345
81860
0.208
81523
0.254
81569
0.300
81615
0.346
81661
0.208
81723
0.254
81769
0.300
81815
0.346
81861
The 0.209
dies are81724
precision
by
that
Cowboy
Action81524
Shooting
of the0.301
fastest81616
growing
shooting
0.209
0.255 is one
81570
0.347
81662
0.255 machined
81770
0.301the same
81816 craftsmen
0.347
81862
®
produce
Precisioneered
sports.0.210
Shooters
accuracy,
Dies.
Full Length
81525 must
0.256 have
81571speed
0.302 and81617
0.348 while
81663
0.210 our81725
0.256
81771Reloading
0.302
81817 The
0.348
81863
recreating
spirit of0.257
the 1880s.
and ammo
Sizer0.211
Die is81726
drilled 0.257
and reamed
the dimensions
0.211 the 81526
81572 Guns,
0.303 costumes
81618
0.349
81664
81772 to0.303
81818
0.349developed
81864
81527 Making
0.258
81573 that
0.304
81619
0.350 image
81665
81727Then0.258
81773
0.304polished,
81819 heat
0.350
81865
must fit0.212
the period.
ammo
fits the
Old West
over0.212
the years.
each die
is hand
treated
and
0.259
81574
0.305
81666
81728 These
0.259 massive
81774 dies
0.305are designed
81820
0.351
means 0.213
loading81528
lead bullets,
jacketed
bullets 81620
are not 0.351
allowed.
It
then0.213
repolished.
for use81866
with
®
0.214 that
81529
0.260
81575 be designed
0.306
81621
0.352properly
81667
0.214
81729
0.260
0.306
81821
also means
the bullets
must
to work
the AmmoMaster—2
or the81775
AmmoMaster
Single0.352
Stage 81867
Press
0.215
81530
0.261
81576
0.307
81622RCBS’
0.353Cowboy
81668
81730 Conversion
0.261
81776
0.307
81822
0.353 here
81868
in lever-action
rifles and
single-action
revolvers.
with 0.215
the .50 BMG
Kit installed.
All
Dies listed
are
0.216
0.262
81577
0.308
81623
0.354
81669
0.216
81731
0.262
81777
81823
81869
Dies are
built 81531
to slightly
different
dimensions
than our
regular
manufactured
with 1-1/2”-12
thread.0.308
Full Length
Die0.354
Set includes
81532
0.263
0.309
81624
0.355
81670
0.217
81732
0.263
81778
0.309
81824
0.355
81870
dies to0.217
allow optimum
sizing,81578
expanding,
seating
and
crimping
Full Length
Sizer
Die
with Expander-Decapping
Unit
and Seater
0.218
81533
0.264
81579
0.310
81625
0.356
81671
0.218
81733
0.264
81779
0.310
81825
0.356
81871
needed0.219
to load81534
great lead
bullet
ammo.
Die with
Bullet
Seater
Plug. 81780
Trim Die0.311
is case81826
hardened
to prevent
0.265
81580
0.311
81626
0.357
81672
0.219
81734
0.265
0.357
81872
damage
when filing
Die
0.220
81535
0.266
81581
0.312
81627
0.358
81673
0.220 to the
81735die 0.266
81781 cases
0.312to length.
81827 Neck
0.358 Sizer
81873
sizes0.221
only the
neck,0.267
not the 81782
shoulder
and body.
0.221
81536
0.267
81582
0.313
81628
0.359
81674
81736
0.313
81828
0.359
81874
0.222
0.268
81583
0.314
81629
0.360
81675
0.222
81737
0.268
81783
0.314
81829
0.360
81875
Cowboy
dieS 81537
1-1/2˝-12
0.223
81538
0.2693-Die Carbide
81584
0.315
81630 Roll 0.361
81676
0.223
81738
0.269
81784
0.315
81830
0.361
81876
Crimp
Steel Carbide
3-Die
3-Die
Decap
Lock
Trim
Neck
Full-Length
Full-Length
Decap
Seater
Expander
Expander 81631
Sizer Sizer
Roll 0.270
Crimp Roll Crimp
Full-Length
Assy
Decap
Pin
Ring
Die
Sizer Die
Sizer Die
Die Set
0.224
81539
81585
0.316
0.362Seater
81677
0.224
81739
0.270
81785
0.316
81831
0.362
81877
Unit
Plug
Die
Assembly
Die
Die
Die
Set
Set
Set
$20.95
$6.95
$10.95
$188.95
$236.95
$236.95
$384.95
Caliber
$9.95
$31.95
$7.95
$46.95 $64.95
$73.95
$73.95
Caliber
0.225
81540
0.271 $78.9581586
0.317$31.95 81632
0.363 $7.95 81678
0.225
81740
0.271
81786
0.317
81832
0.363
81878
416 BARRETT
14501
—
14530
—
9629
9840
9602
.25-20 WIN0.226
11850
—
11858
11856 —
9901
9628
81541
0.272 — 81587
0.31811857 81633
0.364 90081 81679
0.226
81741
0.272
81787
0.318
81833
0.364
81879
.460 STEyR
27501
—
27530
—
9629
9841
9602
.30-30 WIN0.227
14650
—
14658
14656 —
9902
9628
81542
0.273 — 81588
0.31914657 81634
0.365 90082 81680
0.227
81742
0.273
81788
0.319
81834
0.365
81880
.50 BMG 1-1/2”-12
30001
30029
30030
30065
9629
9838
9602
0.228 S&W 81543
0.274 2145181589— 21456
0.32021457 9903/9917
81635
0.228
81743
0.274
81789
0.320
81835
.32 S&W LONG/.32
—
—
21458 90083 9628
81544
0.275 — 81590
0.32115757 81636
0.229
81744
0.275
81790
0.321
81836
.32 WIN SPL0.229
15750
—
15758 90084 9628
15756 —
9904
81545
0.276 — 81591
0.32218157 81637
0.230
81745
0.276
81791
0.322
81837
.32-20 WIN0.230
—
18151
18158 90092 9628
18156 —
9905
Seat Plug aSSemblieS — .50 bmg
.32-40 WIN
32550
—
—
32558 90084 9628
32556 — 32557
9904
NECK BUSHINGS (X-DIE / GM MATCH)
.357 MAG/.38 SPL
—
—
18251
18258 90085 9628rcbs.com
— 18256 18257
9906
$7.95
Due to variability
in neck
brass
thickness,
RCBS standard
dies size the neckCaliber
below your desired diameter and then pull an
expander ball through to
Seat
BMGbushing
A-Max (5/16-24)
.38 S&W
— The20356
20357 die
20358a self-centering,
— sizing
9906/9916
90086 9628n 51
lPlug Assy .50
get the proper—bullet20351
tension.
X Die
features
changeable
neck
that allows you to 09642
precisely set the amount of
Seat Plug Assycase
.50 BMG
.38-40tension
WIN
35651
—
35657
35658
35656
— hardening
9907of the
90087
9628brass, prolonging
on the—bullet.
This reduces
work
case
neck
lifeSpeer
and(5/16-24)
increasing accuracy.09649
Neck bushings are available
Seat Plug
.50 BMG A-Max (5/8-18)
90093
.38-55in
WIN.001” increments
—
36551
— to36556
36557 9908/9915
— NOTE:
90088
9628 4-6 weeks
from .189”
.365”.
If not in36558
stock,
allow
for Assy
delivery.
C
D
C Cowboy Dies
D 1-1/2˝-12 Dies
with these
dies and
ordered
.40-65Neck
WIN .410"bushings
BORE
— are not
36651included
—
36658be90087
36656
— 36657
9909 must
9628 separately. Proper neck bushing size can be determined two ways. Measure
the
outside
of your—loaded
.002”9628
to .003”. This allows approximately .001” of brass to spring back for correct neck
.44 S&W
RUSS/44
SPL neck
— diameter
—
18651
18657
18658 90089
18656 cartridge,
9910 subtract
The other
is18851
to measure
the neck
wall thickness
of your
.44-40tension.
WIN
—
—
18858
18856
— 18857
9911
90089case,
9628 multiply by two, add the diameter of your bullet* and subtract .001”. RCBS
suggests that —
you have
neck
bushings
one to two sizes above and below your target diameter. *Measure your bullets as advertised vs. actual diame.45 S&W SCHO/.45 COLT
—
19151
— 19156 19157 9912/9913 19158 90090 9628
ter can vary between manufacturer.
.45-70 US GOV'T
—
20951
—
20958 90091 9628
20956 — 20957
9914
SaFari dieS
Safari Dies
Straight out of the RCBS® Special Order and listed at a reduced
price. The Safari Series represents cartridges typically used for
dangerous game in Africa. These featured calibers were chosen
based on production rifles from CZ®, Ruger® and others that
offer these timeless African hunting classics.
(*) Requires 1” press adapter bushing, not included.
The .500 Jeffery andNOTE:
.505 Gibbs
are made
on 1”
die bodies
RockChucker
Supreme
comes
standardand
require a press adapter
(not
included).
withbushing
removable
1-1/4”-12
to 7/8”-14 press adapter
bushing. (See page 37)
Caliber
.404 JEffERy
.450 x 400 ExPRESS 3˝ (.400 JEffERy)
.450 RIGBy RIMLESS
.470 NITRO ExPRESS 3-1/4˝
.500 JEffERy
.500 NITRO ExPRESS 3˝
.505 GIBBS
Full-Length
Die Set
$203.95
3-Die
Roll Crimp
Set
$238.95
3-Die 1˝
Roll Crimp
Set
$261.95
Decap
Unit
$9.95
24301
24401
23001
24601
—
—
—
—
—
—
—
—
24804
—
—
—
—
—
24704*
—
24904*
9810
9804
9826
9843
9619
9619
9619
1” press adapter bushing, not included.
Toll Free Order Line*Requires
1-866-735-6237
Note: RC Supreme comes standard with a 1-1/4”-12
to 7/8”-14 press bushing adapter.
79
< TOC >
REFERENCE SECTION
REF.
r c bs - r ifle bullet moulds
80
Toll Free Order Line 1-866-735-6237
HUNTINGTON DIE SPECIALTIES - 2014
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
REF.
REFERENCE SECTION
r c bs - pis tol bullet moulds
Toll Free Order Line 1-866-735-6237
81
bullet casting
< TOC >
REFERENCE SECTION
REF.
HUNTINGTON DIE SPECIALTIES - 2014
r cb s - s il h oue tte bulle t moulds
Silhouette bullet mouldS
north-South SkirmiSh
$92.95
Caliber
Mould
Part Number
Sizer Die
Part Number
Top Punch
Part Number
Seater Plug
Part Number
$112.95
6.5
6.5-140-SIL
82149
.265" dia.
82207
#520
85520
7mm
7mm-145-SIL
82150
.285" dia.
82209
#531
85531
7mm SIL
09696
308
308-165-SIL
82152
.309" dia.
82212
#541
85541
308 SIL
09697
308
308-200-SIL
82153
.309" dia.
82212
#541
85541
308 SIL
09697
357
357-180-SIL
82154
.358" dia.
82223
#430
82530
357 SIL
90019*
44
429-240-SIL
82156
.430" dia.
82229
#422
82526
44 SIL
90031*
Diameter
.576"
.578"
.580"
.584"
older die sets utilizing a 1/4” - 28 threaded seater plug require #09698 for .357 SIL and #09699 for .44 SIL.
alternate bullet SizeS
For
Lube-A-Matic® Sizer.500
DieHodgdon
& TopAdjustable
Punch
CaSt bulletS
286 gr.
$32.95
$10.95
566 gr.
$6.95
253 gr
Hollow Long
533 gr.
Size
Sizer Die
Part Number
.22
.224"
.224" dia.
82200
6mm
.243"
.243" dia.
82201
.25
.257"
.257" dia.
82203
Abbreviation Guide
270
.277"
.277" dia.
82205
CSA - C Sharps Arms
7mm
.284"
.284" dia.
82208
TG
.30
.308"
.308" dia.
82211
.30
.310"
.310" dia.
82213
Cowboy bullet mouldS
SWC
- Semi-Wadcutter
.520 Hodgdon
Adjustable
Flat Short
WC
- Wadcutter
298 gr.
SPL - Special
Flat Long
SP
- Semi-Point
600 gr.
U
- Universal
Hollow ShortBB
- Bevel Base
- Pointed
- Target
Hollow Long
260 gr.
563 gr.
.30
.311"
.311" dia.
82214
PT
M
- Minie Ball
.32
.312"
.312" dia.
82242
CAV - Cavalry
R
- Round Ball
.32
.313"
.313" dia.
82215
CN
SIL
- Silhouette
K
- Keith Type
BPS - Black Powder Silhouette
Hollow Short
.32
.314"
.314" dia.
82216
38/357
.354"
.354" dia.
82219
FN
- Flat Nose
RN
- Round Nose
.355"
.355" dia.
82220
.38
.356"
.356" dia.
82221
Hollow Long
315 gr.
Cowboy Mould
HodgdonCM
Non -Adjustable
Bullet Mould Data
.576 Hodgdon
412 gr.
.580 Hodgdon
416 gr.
All RCBS® Bullet Moulds
are machined to exacting specifications
.578 Hodgdon
414 gr
ensuring accurate and clean casts time after time.
357
.357"
.357" dia.
82222
.375"
.375" dia.
82224
.40
.408"
.408" dia.
82249
44-40
.427"
.427" dia.
82227
.44
.429"
.429" dia.
82228
.44
.431"
.431" dia.
82230
NOTE: All moulds are shown slightly smaller than actual size.
.584Hodgdon
419 gr.
Unless noted otherwise, all RCBS bullet moulds are double cavity
type. Each mould is identified by a five or six digit number, followed
by two or three letters. The first two
or threeMould
digits identify
Roundball
Weightsbullet
caliber, the last three are bullet weight in grains. (Round Balls are
.435 Diameter
111.73 gr.
identified by caliber only.) Bullet weights are established by the
115.63 gr.
following methods: .440 Diamter
.45
.450"
.450" dia.
82231
.445 Diamter
• Rifle&SilhouetteBullets—Linotypealloy
.45
.451"
.451" dia.
82232
.452"
.452" dia.
82233
.45
.457"
.457" dia.
82235
500 S&W/50 AE
.501"
.501" dia.
82250
MOULD Abbreviation Guide
BB - Bevel Base
BPS - Black Powder Silhouette
CAV - Cavalry
CSA - C Sharps Arms
CM - Cowboy Mould
CN - Conical Nose
FN - Flat Nose
K - Keith Type
M - Minie Ball
PT - Pointed
R - Round Ball
RN - Round Nose
SAA - Single Action Army
SIL - Silhouette
SP - Semi-Point
SPL - Special
SWC - Semi-Wadcutter
TG - Target
WC - Wadcutter
U - Universal
Caliber
Mould
Part Number
Sizer Die
Part Number
Top Punch
Part Number
593 gr.
375/38-55
45 Colt
$97.95
.540 Hodgdon Adjustable
- Conical Nose
SAA - Single Action Army
38/357
82
Lube-A-Matic SizerFlat
Die Short
Lube-A-Matic Top Punch
Flat Long
Silhouette Bullet Seater
Plug
Hollow
Short
Caliber
119.62 gr.
.451Silhouette
Diameter and C Sharps Arms Bullets—
124.52 gr.
• Pistol, Black Powder
.457
129.56 gr.
An alloy of one part
tin Diamter
to ten parts lead
.490 Diamter
159.70 gr.
• CowboyBullets—Analloyofoneparttintotwentypartslead
.530 Diameter
202.09 gr.
• Round&MinieBalls—Purelead.+Availableinsinglecavityonly
Cowboy bullet mouldS
$93.95
Caliber
Mould
Part Number
Sizer Die
Part Number
Top Punch
Part Number
+ Single cavity mould
WARNING
CAUSE BIRTH DEFECT
rcbs.com
n
64
l
All RCBS Bullet Moulds are machined to exacting specifications ensuring
accurate and clean casts time after time.
NOTE: All moulds are shown slightly smaller than actual size. Unless
noted otherwise, all RCBS bullet moulds are double cavity type. Each
mould is identified by a five or six digit number, followed by two or three
letters. The first two or three digits identify bullet caliber, the last three are
bullet weight in grains. (Round Balls are identified by caliber only.) Bullet
weights are established by the following methods:
• Rifle & Silhouette Bullets- Linotype alloy.
• Pistol, Black Powder Silhouette and C Sharps Arms Bullets An alloy of one part tin to ten parts lead.
• Cowboy Bullets- An alloy of one part tin to twenty parts lead
• Round & Minie Balls- Pure lead. (+) Available in single cavity only.
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
REF.
REFERENCE SECTION
rcbs - north-south bullet moulds
r c bs - c o wboy bulle t moulds
rcbs - ro u nd B all m o u ld s
Toll Free Order Line 1-866-735-6237
83
< TOC >
REFERENCE SECTION
An Extended or Extra-Long shell holder is required to trim cases
with a Group B or Group E Trim Die.
Group B
21065
20065
21365
20165
18165
18265
21265
18365
20565
23065
22365
23456
20465
22165
21665
18565
18665
18765
18865
18965
19165
23265
22265
Caliber
.25 Automatic
.32 Automatic
.32 H&R Magnum
.32 S&W Long
.32-20 Winchester
.357 Magnum
.357 Remington Maximum
.38 Special
9mm Luger
9mm Mararov
9mm x 21
9mm x 23 Winchester
.38 Colt Super Automatic
.380 Automatic Pistol
.40 S&W
10mm Automatic
.41 Magnum
.44Special
.44-40 Winchester
.45 Automatic (.45 ACP)
.45 Colt
.454Casull
.50 Action Express
Extended
Shell Holder
X-Long
Extended
Shell Holder
#29*
#17*
#23*
#25*
#1*
#6
#6
#6
#16*
#16*
#16*
#16*
#39*
#10*
#27*
#27*
#30*
#18
#35*
#3
#20*
#20*
#33*
Group E
21565
8mm Lebel French Rev.
20365
.38 Smith & Wesson
#6*
35665
.38-40 Winchester
#35*
22965
.45 Winchester Magnum
#36*
*Special Order - Order from the RCBS Special Order Catalog.
NOTES: ____________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
California Prop. 65 Warning:
Melting lead and casting lead objects (with these products)
will expose you and others in the area to lead, which is known
to cause birth defects, other reproductive harm, and cancer.
84
HUNTINGTON DIE SPECIALTIES - 2014
rcbs - L i m i t e d P ro du ct i on
bu lle t m o u lds
Shell Holder Chart for Trim Dies
Trim Die
Part #
REF.
Pistol Moulds
Caliber
Description
25 ACP
25-050-RN
30 Mauser 30-085-RN
8mm Nambu 8mm-110-RN
357/38
38-175-RN
45 Webley 45-265-RN HB+
45 Colt 45-25-RN HB+
Sizer Dia.
.251”
.308”
.323”
.357”
.455”
.455”
Gas Check Grooves
no
1
no
2
yes
2
yes
2
no
3
no
2
Top Punch
#251
#465
*
#311
*
*
Sizer Dia.
.228”
.243”
.258”
.264”
.277”
.310”
-
.323”
.338”
.349”
.358”
.400”
.401”
.401”
.406”
.406”
.439”
-
.468”
.474”
.474”
.468”
.512”
.512”
Gas Check Grooves
yes
1
yes
2
yes
2
yes
3
yes
2
yes
1
yes
2
yes
1
yes
1
yes
2
yes
2
no
1
no
1
no
-
no
2
no
2
no
3
no
3
no
3
yes
-
no
4
no
-
no
-
no
-
Top Punch
#505
#510
#516
#520
#525
*
#560
#550
#505
*
*
#575
#558
#622
#580
#580
#585
#585
*
*
*
*
#615
#615
Sizer Dia.
-
-
-
Gas Check Grooves
-
-
-
-
-
-
Top Punch
-
Diameter
.330”
.350”
.345”
.375”
.395”
.410”
.454”
.464”
.495”
.520”
.562”
.610”
.678”
Gas Check Grooves
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Top Punch
-
Rifle Moulds
Caliber
Description
22
22-060-FN
6mm
243-100-FN
25
25-100-FN
6.5mm 6.5mm-140-FN
270
270-130-FN
32-20
32-115-FN
32
32-170-FN
8mm
8mm-170-FN
33
33-200-FN
348 Win. 348-200-FN
35
35-250-SP
38-40
40-170-FN
38-40
40-180-FN
38-40
40-185-SWC
40
41-260-FN
40
41-300-FN
43
43-370-FN
11mm
44-370-FN
500/465 465-480-FN+
470 NE gc 475-445-FN+
470 NE 475-500-FN+
577/450 MH 468-480-MH+
50
50-450-FN+
50
50-515-FN+
Paper Patch Moulds
Caliber
40
45
50
Description
40-400-PP+
45-500-PP+
50-530-PP+
Round Ball Moulds
Caliber
-
-
-
-
-
-
-
-
-
-
-
-
-
Description
330-R
350-R
354-R
375-R
395-R
410-R
454-R
464-R
495-R
520-R+
562-R+
610-R+
678-R+
(*) Custom-bulit Top Punch, (+) Single cavity mould
SP Semi-Pointed, RN Round Nose, HB Hollow Base,
SWC Semi-wad Cutter FN Flat Nose,
Toll Free Order Line 1-866-735-6237
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
Part #
9377
9376
9378
9379
9380
9381
9382
9383
9384
9385
9386
9387
Caliber
34 Cal.
35 Cal.
36 Cal.
37 Cal.
40 Cal.
41 Cal.
416 Cal.
44 Cal.
45 Cal.
45-R Cal.
475 Cal.
500 Cal.
Part #
9388
9389
9390
9391
9392
9393
9397
9394
90395
9396
9398
9399
Part #
90301
90302
90303
90304
90305
90306
90307
90308
90309
90310
90311
90312
90313
90314
90315
90316
90317
90318
90319
90320
90321
Holder #
#23
#24
#25
#26
#27
#28
#30
#32
#33
#34
#35
#36
#37
#38
#39
#40
#41
#42
#43
#44
#48
#1
9371
#3
9373
#2
9372
#4
9374
* For use with Rotary Case Trimmer and Rotary Case Trimmer-2 only.
Replacement Parts
Expander-Decapping Rods, Expander balls and Decapping Pin Holders are no longer available
separately. If any of these fail, order a replacement Expander-Decapping Unit or Decapping Unit as
shown in the tables on pages 43-44. With the exceptions listed below, all new RCBS "Precision" Sizer
Dies use a #90164 Headed Decapping Pin.
Caliber
.22 PPC
6mm PPC
7mm Thompson/Center Ugalde
.35 Whelen
.358 Winchester/.356 Winchester
.416 Remington Magnum
Part #
90323
90324
90325
90326
90327
90328
90330
90332
90333
90334
90335
90336
90337
90338
90339
90340
90341
90342
90343
90344
90348 NEW
Caliber
.22 thru .25
6.5mm thru .45
RCBS Extended Shell Holders
Part #
#
08952
2
08953
3
08956
6
08960
10
08968
18
Decap Pins-5 Pack
Size, Type & Caliber
Part #
Universal-Headed 22 thru 45 caliber
90164
Small-Straight 22 thru 25 caliber
09608
Large-Straight 6.5mm thru 45 caliber
09069
Pilot & Shell Holder Pack - Part # 90363
CT Pilot, 40 Caliber
CT Pilot 22 Cal.
CT Shell Holder #6
CT Pilot 24 Cal.
CT Shell Holder #16
CT Pilot 25 Cal.
CT Shell Holder #18
CT Pilot 27 Cal.
CT Shell Holder #27
CT Pilot 28 Cal.
CT Pilot 30 Cal.
CT Pilot 35 Cal.
Trim Pro Rifle Pack - Part # 90362
CT Pilot 44 Cal.
CT Shell Holder #2
CT Pilot 45 Cal.
CT Shell Holder #3
CT Shell Holder #2
CT Shell Holder #4
CT Shell Holder #3
CT Shell Holder #10
CT Shell Holder #10
Decapping Pin Number
9608
9609
Important: Expander-Decapping Units, Decapping Units and all Decapping Pins are available through
RCBS Distributors and Dealers. All other replacement parts should be ordered from RCBS Customer
Service. 1-800-533-5000
Trim Pro Shell Holder Pack & Part Number
Trim Pro Pistol Pack - Part # 90361
Decapping Pin Number
9608
9608
9609
9609
9609
9609
NOTE: Regular Decapping Pins for older RCBS Sizer Dies will remain available. Use the chart below to
order replacements.
Trim Pro Shell Holder Shell Holder # & Part Number
Holder #
#1
#2
#3
#4
#5
#6
#7
#8
#9
#10
#11
#12
#13
#14
#15
#16
#17
#18
#19
#20
#21
REFERENCE SECTION
Case Trimmer* Collet # & Part No.
Case Trimmer Pilot Calibers & Single Pack Part Number
Caliber
17 Cal.
20 Cal.
22 Cal.
24 Cal.
25 Cal.
26 Cal.
27 Cal.
28 Cal.
30 Cal
31 Cal.
32 Cal.
33 Cal.
REF.
Trim Pro Pilot & Shell
Toll Free Order Line 1-866-735-6237
Bullet Dia.
.224"
.228"
.243"
.257"
.264"
.277"
.284"
.308"
.309"
.310"
.311"
.321"
.323"
.338"
.348"
.358"
.375"
.416"
Neck Expander Dies
Complete Die Exp. Plug Only
39803
39851
39805
39853
39807
39855
39809
39857
39811
39859
39813
39861
39815
39863
39817
39865
39819
39867
39821
39869
39823
39871
39825
39873
39827
39875
39829
39877
39830
39878
39831
39879
39833
39881
39835
39883
85
< TOC >
NOTES: ____________________________________________
NOTES: ____________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
___________________________________________________
86
< TOC >
FAX: (530) 534-1212
87
< TOC >
88
TABLE OF CONTENTS
ORDERING INFORMATION
REFERENCE SECTION
ORDERING INFORMATION
PRICES
All orders will be invoiced at prices in
effect at the time of shipment. Prices and
Stock subject to change without notice.
MINIMUM ORDER - $15
PAYMENT METHODS
We accept VISA, MasterCard, Discover
and American Express.
You must provide us with the name on
the card, the card number, the expiration
date on the card and the security code.
We will accept either check, USPS money
order or draft. You must make the check or
draft payable in U.S. Dollars.
You can wire the money to our bank account.
The following is the bank information:
DOMESTIC WIRES
Tri Counties Bank # (call for number)
1180 Oro Dam Blvd.
Oroville, CA 95965
Account # (call for number)
INTERNATIONAL WIRES
Correspondent Bank
Union Bank # (call for number)
S.W.I.F.T. Code: BofC US 33 SFO
To: Tri Counties Bank # (call for number)
1180 Oro Dam Blvd. East
Oroville, CA 95965, USA
Account # (call for number)
The beneficiary bank chooses its own bank
within the States to send the money to a
domestic bank- Tri Counties Bank
A $25.00 TRANSFER FEE ON
WIRE TRANSFER OF FUNDS ON
INTERNATIONAL ORDERS.
We do not encourage you to send cash.
However, if you do, send it via registered
mail.
BACKORDERS
Backorders will be invoiced at the price
at the time of shipping. We try to maintain
stock on over 2,000 items all the time.
If we are out of stock on an item
you have ordered, we ask for your
patience. We will ship the item within
24 hours after we receive it from the
manufacturer. (The expected date on your
order is based on the best information
available at the time of the order). You
can cancel a backorder at any time
except for special order items.*
(Note: Items paid by credit card are only
charged at the time of actual shipment.)
SPECIAL ORDERS (S.O.)
*Unless the special order are in stock at
the time the order is placed, RCBS Special
order are typically 90-to-120 days, and
cannot be cancelled or returned for credit.
< TOC >
HUNTINGTON DIE SPECIALTIES - 2014
BULLETS & CASES
*Bullets and Cases shipping charges
are determined by actual weight.
If you prepay, please estimate charges,
any difference will be refunded.
DROP SHIPMENT
We will drop ship for you to any place in
the world that the U.S. State Department
allows.
DAMAGED GOODS, OVERAGES, &
SHORTAGES
Please inspect the shipping container
upon receipt of the shipment. In the event
of damaged merchandise, overages, or
shortages, please notify us immediately.
We will respond promptly.
RETURNED GOODS
If you wish to return merchandise, notify
us of the reason before doing so. All
returned goods must be accompanied by
a copy of our invoice.
SHIPPING CHARGES
All shipping of reloading equipment, dies,
presses, tumblers, etc. are now charged
by weight. We will give you a quote upon
request.
HDS will ship either; UPS or USPS. If you
do not specify we will send your order
normally the least-expensive method. For
bulk bullets and cases we recommend
USPS Priority Flat Rate (70 lbs. max.).
For multiple large items we will send your
order in separate shipments.
HUNTINGTON DIE SPECIALTIES
PO Box 991
601 Oro Dam Blvd., East
Oroville, CA 95965 USA
TELEPHONE ORDERS
Phone orders will be accepted between
7:00am and 4:30pm pst, Monday-Friday.
We cannot accept collect calls.
Phone
(530) 534-1210
FAX
(530) 534-1212
TOLL FREE:
1-866-RELOADS (735-6237)
MASSACHUSETTS RESIDENTS
A license to sell ammunition is required
for shipments of cases and bullets to
Massachusetts.
ONLINE CATALOG / EMAIL
Online: www.huntingtons.com
E-mail: [email protected]
ORDERS TO ALASKA / HAWAII
Shipping charges by weight.
PLEASE NOTE:
Our customer list is confidential and NOT
FOR SALE! We do not have any loading
data.
EXPORT ORDERS
We will export to any place in the world
that the U.S. State Department will allow.
(There are restrictions concerning
ammunition components to specific
countries.)
If we must apply for an export license
which can take from 30-to-60 days. There
is a service charge of $300.00 to $500.00
for processing the export license.
If your country requires an import
certificate, we will need the original or a
certified copy of the original certificate.
If your country does not require and
import certificate, we need an original
letter stating “your country does not
require an import certificate”. This
letter must be stamped with an official
government stamp.
PALLET CHARGE
International freight orders less than
$
2,000. will be charged a $30.00 pallet
charge.
FEDERAL EXPRESS ORDERS
There is a $12.00 Pickup fee on Federal
Express orders.
rev 053014
Toll Free Order Line 1-866-735-6237
RETAIL / DEALER PRICING
HDS now has separate Retail and Dealer
Price Lists. For a free Retail Price List
call 866-RELOADS. For a confidential
Dealers Price List send/fax/email a copy
of a current signed FFL.
SERVICE ON RCBS PRODUCTS
For service on RCBS products,
contact RCBS directly with a complete
explanation:
ATK / RCBS
605 Oro Dam Blvd, East
Oroville, CA 95965
1-800-533-5000
(Customer Service)
6:30am-3:30pm pst, Mon-Thurs.
E-MAIL: [email protected]
WEB SITE: www.rcbs.com
------------------------Huntington Die Specialties (HDS)
sells RCBS products, but HDS
is not affiliated, nor do they own
RCBS. HDS will make every effort
to answer questions on RCBS
products.
-------------------------
huntington die specialties - 2014
09201 Number 1
09204 Number 4
218 Bee
25-20 Winchester
32-20 Winchester
09202 Number 2
22 Savage High Power
25-35 Winchester
6.5x55 Swedish Mauser
7mm-30 Waters
307 Winchester
308 Marlin Express
.30-30 Winchester
7.5x54 French MAS
7.5mm Schmidt-Rubin
7.7x58 Japanese Arisaka
32 Winchester Special
32-40 Winchester
356 Winchester
357 Herrett
375 Winchester
38-55 Winchester & Ballard
09203 Number 3
22 Bench Rest Remington
22-250 (.22 Varminter)
240 Weatherby Mag
243 Winchester
6mm BR Remington
6mm Remington (244 Rem)
25-06
250 Savage (250-3000 Savage)
257 Roberts
257 Roberts Improved 40*
260 Remington
6.5mm-06
6.5mm-284 Winchester
6.5x47 Lapua
6.5x57
270 Winchester
280 Remington (7mm Exp Rem)
284 Winchester
7mm BR Remington
7mm-08 Remington
7x57 Mauser (7mm Mauser)
7x64 Brenneke
30-06 Springfield
300 Savage
308 Winchester
7.65x53 Mauser (Belgian)
7.7x58 Japanese Ariska
8mm-06
8x57 Mauser (8mm Mauser)
338 Federal
338-06
35 Whelen
358 Winchester
9.3mm x 62 Mauser
370 Sako Mag / 9.3x66 Sako
400 CorBon
45 Glock Action Pistol (GAP)
45 Automatic (.45 ACP)
< TOC
257 Weatherby Mag
264 Winchester Mag**
6.5mm Remington Mag
270 Weatherby Mag
7mm Remington Mag**
7mm STW
7mm Weatherby Mag
30-338 Winchester Mag
300 RCM
300 Holland & Holland Mag
300 Weatherby Mag
300 Winchester Mag**
308 Norma Mag
8mm Remington Mag
338 RCM
338 Winchester Mag
340 Weatherby Mag
350 Remington Mag
358 Norma Mag
9.3x74 Rimmed
375 Ruger
375 Holland & Holland Mag
416 Ruger
416 Remington Mag
450 Marlin
458 Winchester Mag
458 Lott
460 S&W
09205 Number 5
348 Winchester
09206 Number 6
22 Remington Jet
5.6x50 Rimmed
256 Winchester Mag
357 Mag
357 Remington Maximum
38 Smith & Wesson
38 Special
30-378 Weatherby Mag
338 Lapua (Lapua cases only)
338-378 Weatherby Mag
378 Weatherby Mag
40-60 Winchester - .408”
40-65 Shiloh-Sharps - .408”
45-60 Winchester
45-70 Government
45-90 2.4” Sharps Straight
45-100 2.6” Sharps Straight
45-110 2-7/8” Sharps Straight
45-120 3-1/4” Sharps Straight
460 Weatherby Mag
09215 Number 15
6.5x50 Japanese Ariska
09216 Number 16
30 Luger (7.65mm Luger)
30 Mauser (7.63 Mauser)
356 TSW
9mm FAR
9mm Luger
9mm Makarov
9x21
9x23 Winchester
41 Action Express
09217 Number 17
5.7 Johnson / 22 Spitfire
30 M1 Carbine
32 Auto (7.65mm Automatic)
09218 Number 18
44 Rem. Mag
44 Special
09219 Number 19
6.8mm Remington SPC
25 Remington
30 Remington
32 Remington
09207 Number 7
09220 Number 20
09208 Number 8
09221 Number 21
09209 Number 9
09222 Number 22
30-40 Krag
303 British
45 Auto Rim
6.5x52 Carcano
6.5x54 Mannlicher-Schoenauer
35 Remington
09210 Number 10
17 Remington
17 Remington Fireball
204 Ruger
221 Remington Fireball
222 Remington
222 Remington Mag
223 Remington (5.56x45)
6x45
7mm T/CU
300 ACC Blackout
380 Auto Pistol
9x18 Ultra
09211 Number 11
* Shoulder angle of improved version.
** Some Browning, DWM, Lapua,
Norma, RWS and SAKO cases require
an RCBS #26 Shell Holder.
*** For Ten-X brass.
NOTE: If cartridge is not listed, consult
the RCBS Special Order Catalog for
appropriate shell holder. (see page 29)
09214 Number 14
220 Swift
225 Winchester
09212 Number 12
22 Hornet
22 K-Hornet
303 Savage
11mm Mauser (43 Mauser)
43 Spanish
09223 Number 23
32 Harrington & Richardson Mag
32 Smith & Wesson, Long
327 Federal Mag
09224 Number 24
405 Winchester
09225 Number 25
8mm Nambu
09226 Number 26
7x65 Rimmed
8x57JR
09227 Number 27
224 Weatherby Mag
357 Sig
40 S&W
10mm Auto
09228 Number 28
444 Marlin
09229 Number 29
09213 Number 13
7.62x54R Russian
88746
45 Colt
454 Casull
25 Automatic (.25 ACP)
09230 Number 30
30 Rem AR
41 Mag
50 BMG, 416 Barrett, 460 Steyr
Toll Free Order Line 1-866-735-6237
shell holders
09231 Number 31
50-70 Government
50-90 2-1/2” Sharps Straight
50x95 Win (exp.)
56-50 Spencer
45-75 Winchester
450x400 Exp. 3” (400 Jeffery)
09232 Number 32
7.62x39
22 PPC
6mm PPC
264 LBC-AR
09233 Number 33
50 Action Express
09234 Number 34
6.5x68S
8x68S Mag
99235 Number 35
38-40 Winchester
44-40 Winchester
45 Schofield
99236 Number 36
45 Winchester Mag
99237 Number 37
338 Lapua (Norma cases only)
416 Rigby
450 Rigby Rimless
500 Jeffrey
99238 Number 38
7mm Rem. Ultra Mag
7mm SAUM
300 Rem. Ultra Mag
300 SAUM
338 Rem. Ultra Mag
375 Rem. Ultra Mag
455 Webley
99239 Number 39
38 Super (38 ACP)
99240 Number 40
475 Linebaugh
480 Ruger
99241 Number 41
404 Jeffrey
99242 Number 42
376 Steyr
99243 Number 43
223 WSSM
243 WSSM
25 WSSM
270 WSM
7mm WSM
300 WSM
325 WSM
99244 Number 44
338 Marlin Express
500 S&W
99245 Number 45
5.7x28 (FN)
99246 Number 46
470 NE 3-1/4”
500 NE 3”
99247 Number 47
408 Chey Tac
505 Gibbs
99248 number 48
338 Norma Mag
338 Lapua (All cases)
99249 number 49
40-60 Win .408” ***
45-60 Win ***
89