to the catalog in pdf file format

Transcription

Concrete Mixer Supply.com
Mixer Parts
PUMPS & MOTORS
Concrete Mixer Supply.Com
SECTION 16
Mixer Truck
Pumps - Motors
Repair Components
Drive Shafts
Pump Mount Assy
www.concretemixersupply.com
16-1
877-254-0715
Mixer Parts
PUMPS & MOTORS
Typical Hydrostatic System
1. Variable Displacement Pump
2. Fixed Displacement Motor
3. Oil Reservoir
4. Shut Off Valve
5. Suction Filter with out by pass valve
6. Charge Pump Inlet Hose
7. Pump & Motor Case Drain Hoses
8. High Pressure Hoses
9. Heat Exchanger (Cooler)
10. Heat Exchange By-Pass Valve
11. Reservoir Return Hose
12. Reservoir Fill Cap & Breather
16-2
877-254-0715
Mixer Parts
PUMPS & MOTORS
EATON HYDRAULICS
Suggestion: When replacing either the pump or motor, it
is recommended that both units be changed out and the
hydraulic system flushed to clean the hoses, filter &
reservoir of any contaminents
When ordering or requesting quote
information on pump and motors, it is
important that you have the Pump or
Motor Model and Serial #s. There are alot
of variable options that have been used
in the mixer industry. So to ensure you
get exactly the same units or parts for
your repair job check these number first.
16-3
877-254-0715
EATON HYDRAULICS
Mixer Parts
PUMPS & MOTORS
Control Valve
Lever
Eaton Manual Control Valve &
Gasket
EATON REPAIR PARTS STOCKED BY CMS.Com FOR QUICK DELIVERY
CMS#
H 1040
HP 1003
H 1016
H 1026
H 1026 A
HP 1005
HP 1006
H 1045
HP 1007
HP 1008
H 1022
H 1017
HP 1009
HP 1010
OEM Part#
8137000
990064-022
104306
101594
02421
02463
02471
101137
1690920
990029
990231
990287
990141
990143
Description of Part
Eaton Chute Pump (Apad Mount)
Eaton Manual Control Valve Rebuilt
Eaton Manual Control Valve Shaft
Control Valve Lever
Control Valve Lever
Charge Pump Shaft (Non Apad)
Charge Pump Shaft (Apad)
Woodruff Key
Charge Pump Gasket
Motor Block Seal Kit
Pump & Motor Shaft Seal Kit
Control Valve Gasket & Oring Kit
Down Solenoid
Up Solenoid
16-4
877-254-0715
Mixer Parts
PUMPS & MOTORS
EATON HYDRAULICS
Charge Pump Gasket
Eaton Shaft Seal
Same for Pump & Motor
H1035 CCW (Front Mount)
H1035A CW (Behind Cab Mount)
Eaton Chute Pump
Eaton Chute Pump
Shaft does not show the
9Tooth that is required.
16-5
877-254-0715
Mixer Parts
PUMPS & MOTORS
SUNDSTRAND HYDRAULICS
The Sundstrand Model # is necessary for
identification of the specific unit. The
Model # must be used when ordering
parts. First 2 digits identify the series 20
thru 27. Typically, the mixer manufacture
used a 21 to 23 series pump and motor
combination. Depending on the gearbox
reduction ratio the motor might be the
same series as the pump or on step
down so the drum rotates at the proper
mixing speed.
The next number in the Model # indicates
pump or motor #2 for pump & #3 for
motor. The last 3 numbers identify such
items as type of control, shaft (tapered or
splined) pressure settings, rotation clockwise or counter
clockwise
16-6
877-254-0715
Mixer Parts
PUMPS & MOTORS
SUNDSTRAND HYDRAULICS
SUNDSTRAND REPAIR PARTS STOCKED BY CMS.Com
CMS #
HP 1002
HP 1001
HP 1000
HP 1000 A
H 1025
H 1021
H 1021 A
H 1020
H 1044
HP 1004
H 1024
FK016
OEM Part#
9510368-2000
10204365-98
1127832
115209
5010726
9510190
9510189
9510192
96898
9800204
9800997
Description of Part
Rebuilt Manual Control Valve (core required)
Charge Pump Gasket
Apad Cover Plate
Apad Gasket
Control Extension
Shaft Seal Kit for 23 Series Pump/Motor
Shaft Seal Kit for21-22 Series Pump/Motor
Control Valve Gasket & Oring Kit
Pump Shaft Castle Nut
Control Valve Shaft
Control Valve Bushing
Flange Kit
Sundstrand
Control
Bushing
Sundstrand
Control Shaft
Sundstrand
Control Lever
When a customer purchases pump and
motors from CMS.Com, we will access a
Refundable Core Charge for each unit.
This should ensure that the customer will
in good faith return his old units to us for
rebuilding and restocking. We pay the
return freight so you only pay freight on
the incoming parts.
4 Bolt Flange
Kit w/Oring
16-7
877-254-0715
Mixer Parts
PUMPS & MOTORS
Universal Drive Shaft
DS 1000
U Bolt Kit
DS 1001 1310
Pump End Yoke 1310
H 1046 1-3/8 Tapered
H 1046 A 1-1/2” Tapered
Drive Flange 1310
DS 1021
Universal Kit
DS 1030 1310
DS 1030A 1350
16-8
877-254-0715
Mixer Parts
PUMPS & MOTORS
FLANGE
A = __________INCHES
B=___________INCHES
C=___________INCHES
PUMP END YOKE
A = __________INCHES
B=___________INCHES
C=___________INCHES
D=___________INCHES
16-9
877-254-0715
Pump End Yoke 1310
H 1046 1-3/8 Tapered
H 1046 A 1-1/2” Tapered
Mixer Parts
PUMPS & MOTORS
Universal Drive Shaft
DS 1000
Drive Flange 1310
DS 1021
Universal Kit
DS 1030 1310
DS1030A 1350
DS1001 UBOLT KIT
1310
16-10
877-254-0715
Mixer Parts
PUMPS & MOTORS
FRONT MOUNTED
PUMP PLATE ASSEMBLY
Truck Grill
Item#
1
2
3
4
5
6
7
8
9
10
11
12
13
14
CMS #
H 1032 C
H 1032 D
H 1032 E
UW 3000
B3150
LN 3000
H 1032 B
H 1032
HP 2000
HP 2000 A
HP 2000 B
B 8225
UW 8000
LN 8000
OEM Part#
2473INT
2474INT
160681
Description of Part
Cooler Mounting Bracket LH
Cooler Mounting Bracket RH
Grommet
3/8” Washer
3/8 x 1-1/2” Hex Bolt
3/8” Locknut
Cooler Guard
Oil Cooler
Pump Mounting Plate Universal
LH Mounting Support Angle
RH Mounting Support Angle
3/4 x 2-1/4” Hex Bolt Grade 8
3/4” Washer
3/4” Locknut
31285C
2165000
43901001
43901223
43901222
16-11
877-254-0715
Mixer Parts
PUMPS & MOTORS
PUMP PLATE ASSEMBLY
FLYWHEEL POWER TAKE OFF
Item#
1
2
3
4
5
6
7
CMS #
HP 2010
HP 2010 A
HP 2010 B
B 8250
HP 2010 C
LN 8000
UW 8000
OEM Part#
35112004
35113R
35113L
Description of Part
Flywheel Pump Plate
Support Angle RH
Support Angle LH
3/4 x 2-1/2” Hex Bolt Grade 8
Strong Back
3/4” Locknut
3/4” Washer
60003011
16-12
877-254-0715
Mixer Parts
PUMPS & MOTORS
APAD CHUTE PUMP
H1035 CCW
H1035A CW
16-13
877-254-0715
Mixer Parts
PUMPS & MOTORS
16-14
877-254-0715
Mixer Parts
PUMPS & MOTORS
EATON PUMP
16-15
877-254-0715
Mixer Parts
PUMPS & MOTORS
16-16
877-254-0715
Mixer Parts
PUMPS & MOTORS
Eaton RE & EP
Controls
16-17
877-254-0715
Mixer Parts
PUMPS & MOTORS
Eaton Control Valve
(EP Control)
Item#
1
2
3
4
5
6
7
McNeilus #
1145049
100.02408
1140768
1262205
1180596
1233060
Description of Part
Valva - Control, EP
Gasket, Control Valve
Coil - 12v, EP Control, w/Diode
Cartridge - EP, w/Capnut, O-ring and Gasket
Cover - w Pushpin, Rubber, EP CV
O-ring (not shown)
Gasket - Rubber, Eaton EP Coil not shown
16-18
877-254-0715
Mixer Parts
PUMPS & MOTORS
16-19
877-254-0715
Mixer Parts
PUMPS & MOTORS
Typical Hydrostatic System
1. Variable Displacement Pump
2. Fixed Displacement Motor
3. Oil Reservoir
4. Shut Off Valve
5. Suction Filter with out by pass valve
6. Charge Pump Inlet Hose
7. Pump & Motor Case Drain Hoses
8. High Pressure Hoses
9. Heat Exchanger (Cooler)
10. Heat Exchange By-Pass Valve
11. Reservoir Return Hose
12. Reservoir Fill Cap & Breather
16-20
877-254-0715

to the catalog in pdf file format

Transcription

Similar documents

32 McNeilus Mixer Parts Section Revised

Gearboxes - Concrete Mixer Supply

Gift Giving at Shoebuy.com