S Y S T E M 5 Product Catalog

S Y S T E M 5
Product Catalog
Part Change Efficiency
Set Up Efficiency
Tool Change Efficiency
Ease Of Use Efficiency
WHAT IS
CHICK WORKHOLDING?
Efficiency Through Workholding Innovation.
WORKHOLDING DESIGNED FOR YOUR MACHINING CENTER
Chick has taken the work out of choosing workholding for your
machine by designing Workholding Packages specifically for your
vertical or horizontal machining center. Every Workholding Package
from Chick is designed to optimize your machining center’s work
envelope and ships complete with all necessary hardware required
for installation.
WORKHOLDING PACKAGES INCREASE YOUR EFFICIENCY WITH:
UÊ"*/Ê*
/Ê Ê9"1,Ê7",Ê 6"*
UÊ /" Ê"Ê/ʼÊ<" ½Ê" Ê9"1,Ê
UÊ"*/1Ê*,"1
/6/9Ê" Ê9"1,Ê6
UÊ Ê,/9Ê
"*,Ê/"Ê"/,Ê- UÊ"1/‡"‡/‡"8Ê -//"
3
MOST POPULAR HORIZONTAL WORKHOLDING PACKAGES
Each Workholding Package is designed for your machine with all of the corresponding
hardware and interface equipment that makes efficiency as simple as putting your
package on your machine and making parts.
Haas EC-400
Mazak HCN 5000
Kitamura HX-300iF
Matsuura H+300
5HP-HAAS-00025
5HP-MAZA-00048
5HP-KITA-00034
5HP-MATS-00058
Doosan Infracore DHP 4000
Haas EC-300
Kitamura HX-400iF
Makino A-61
5HP-DAEW-00049
5HP-HAAS-00016
5HP-KITA-00035
5HP-MAKI-00021
Makino A-51
Mori-Seiki NH-4000
Mori-Seiki NH-5000
Okuma MA-400
5HP-MAKI-00039
5HP-MORI-00066
5HP-MORI-00077
5HP-OKUM-00057
Additional Workholding Packages are available for these and other
“>V…ˆ˜ˆ˜}ÊVi˜ÌiÀÃÊ>ÌÊÜÜÜ°
…ˆVŽ7œÀŽ…œ`ˆ˜}°Vœ“ÊœÀÊV>Ê£‡nää‡ÎÎӇ{{Óx°
{
MOST POPULAR VERTICAL WORKHOLDING PACKAGES
Each Workholding Package is designed for your machine with all of the corresponding
hardware and interface equipment that makes efficiency as simple as putting your
package on your machine and making parts.
Haas VF-3
Mazak Nexus 510C
Fadal VMC 4020
Fanuc RoboDrill Mate
5VP-HAAS-00198
5VP-MAZA-00063
5VP-FADA-00024
5VP-ROBO-00021
Doosan Infracore DMV 4020
Fadal VMC 3016
Haas VF-5
Haas VF-2
5VP-DAEW-00044
5VP-FADA-00039
5VP-HAAS-00101
5VP-HAAS-00192
Haas MiniMill
Hurco VM-1
Mori-Seiki NV-5000B
Okuma MCV 4020
5VP-HAAS-00218
5VP-HURC-00002
5VP-MORI-00088
5VP-OKUM-00037
Additional Workholding Packages are available for these and other
“>V…ˆ˜ˆ˜}ÊVi˜ÌiÀÃÊ>ÌÊÜÜÜ°
…ˆVŽ7œÀŽ…œ`ˆ˜}°Vœ“ÊœÀÊV>Ê£‡nää‡ÎÎӇ{{Óx°
5
VERTICAL WORKHOLDING
"1 /"
/…iʜ՘`>̈œ˜½ÃÊÃÌ>˜`>À`Ê}Àˆ`Ê«>ÌÌiÀ˜Ê
simplifies designing, cataloging, and
utilization of your fixtures, providing
consistency and repeatability to your
Ãi̇իð
The perfect solution for repeat
fixture setups.
Ê UÊPrecision ground cast iron to 35mm thick.
Ê UÊÊi˜}̅Ê>˜`Ê܈`̅ÊÌ>ˆœÀi`Ê̜Ê̅iʓ>V…ˆ˜i½ÃÊ
work envelope.
Ê UÊx䓓Ê}Àˆ`Ê«>ÌÌiÀ˜ÊœvÊLÕÅi`Ê>˜`ÊÌ>««i`ʅœið
6
FOUNDATION DESIGN
FIXTURE MOUNTING HOLES
ÊœÕ˜`>̈œ˜Ãʈ˜VœÀ«œÀ>ÌiÊ
>˜Ê>«…>‡˜Õ“iÀˆVʏ>Liˆ˜}Ê
system to simplify building
and cataloging of fixtures.
Each hole within the
x䓓Ê}Àˆ`Ê«>ÌÌiÀ˜Ê…>ÃÊ>Ê
£Ó““ÊLÕň˜}ÊvœÀÊ>VVÕÀ>ÌiÊ
œV>̈œ˜Ê>˜`Ê>˜Ê£ÓÊ̅Ài>`Ê
for bolt down. These holes
are sealed with patented
chip plugs preventing the
build up of chips.
MACHINE INTERFACE
MOUNTING HOLES
Customized for each
machining center. The
hardware necessary to
“œÕ˜ÌÊ̅iʜ՘`>̈œ˜Ê̜Ê
your table is included.
1,/Ê"/-
050-0001
050-0002
ACCESSORIES
"1 /" Ê"8
œÕ˜`>̈œ˜ÊœÝÊ>ÀiÊL>˜Ž]ʅˆ}…Ê
strength aluminum blocks that
are machined into a dedicated
Vœ“«œ˜i˜ÌʜvÊޜÕÀÊÃi̇ի°Ê`i>Ê
for designing component modular
wÝÌÕÀiÃʜ˜ÊœÕ˜`>̈œ˜Ã°Ê1ÃiÊ
VVÕÀ>ÌiʜÌÃÊvœÀÊ՘«>À>i`Ê
repeatability.
/…iÃiÊ£ÓÊLœÌÃʅ>ÛiÊ>Ê}ÀœÕ˜`Ê
shoulder that provides precision
repeatability when using
œÕ˜`>̈œ˜ÊœÝʜÀÊ>˜Þʜ̅iÀÊ
modular fixturing components.
>V…ʜ՘`>̈œ˜ÊˆÃÊÌ>ˆœÀi`Ê̜ÊwÌÊޜÕÀʓ>V…ˆ˜i½ÃÊëiVˆwV>̈œ˜Ã°ÊÊ
Due to the variety of machines, please contact CHICK to obtain
̅iÊ>««Àœ«Àˆ>Ìiʜ՘`>̈œ˜ÊœÀ`iÀʘՓLiÀ°
7
VERTICAL WORKHOLDING
+7‡"Take advantage of the dual station
clamping benefits thus increasing
productivity twofold and amortizing
tool change time. Select a base of either
high strength aluminum or cast iron and
design your fixturing from there. CHICK’s
wide variety of QwikChange™ accessories
­«}½ÃÊÓӇΣ®]Ê«ÀœÛˆ`iÊޜÕÊ܈̅Ê̅iʓœÃÌÊ
flexible system in the industry.
Qwik-Loks are most efficient when
machining on one or opposing
part sides.
All dimensions and systems include
standard jaws.
Height
Length
Width
Holding Capacity
Dual Station
Nested Subplates
œÀÊx䓓ÊÃÞÃÌi“Ãʜ˜Þ°
­-iiÊ«>}iÊÎxÊvœÀʈ˜vœÀ“>̈œ˜®
n
Single Station
0520 Qwik-Lok
081-1200
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
i˜}̅Ê
Weight
Ê
Maximum
Holding Capacity
Õ>Ê-Ì>̈œ˜Ê
1030 Qwik-Lok
5QL1030-AL
mm
ÇxÊ
xäÊ
ÓäÎÊ
(inch)
­Ó°™x®
­£°™Ç®
­Ç°™™®
kg
ÓÊ
(lbs)
­x®
mm
(inch)
nxÊ ­Î°Îx®
ÓʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
-ˆ˜}iÊ-Ì>̈œ˜Ê
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
i˜}̅Ê
1540 Qwik-Lok
5QL1540-AL
mm
™xÊ
£ääÊ
ÎäxÊ
(inch)
­Î°Ç{®
­Î°™{®
­£Ó°ä£®
kg
™Ê
(lbs)
­£™®
Maximum
Holding Capacity
mm
(inch)
Õ>Ê-Ì>̈œ˜Ê
£ÎäÊ ­x°£Ó®
Weight
Ê
ÓʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
£nxÊ ­Ç°Ón®
-ˆ˜}iÊ-Ì>̈œ˜Ê
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
i˜}̅Ê
mm
£ÓäÊ
£xäÊ
{äÇÊ
(inch)
­{°ÇÓ®
­x°™£®
­£È°äÓ®
kg
Ó£Ê
(lbs)
­{È®
Maximum
Holding Capacity
mm
(inch)
Õ>Ê-Ì>̈œ˜Ê
£ÇxÊ ­È°n™®
Weight
Ê
ÓʇÊ/œÌ>Ê7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
ÓnäÊ ­££°äÓ®
-ˆ˜}iÊ-Ì>̈œ˜Ê
ÎnäÊ ­£{°™È®
£Ê‡Ê7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜
£Ê‡Ê7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜
£Ê‡Ê7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜
Maximum Recommended
Torque Clamping Force
Maximum Recommended
Torque Clamping Force
Maximum Recommended
Torque Clamping Force
Ó]xÓäʏLðÊJÊ£{Êv̇Lð
­££°Óʎ ÊJÊ£™Ê ‡“®
x]äääʏLðÊJÊxÓÊv̇Lð
­ÓÓ°äʎ ÊJÊÇäÊ ‡“®
™]äääʏLðÊJÊ££nÊv̇Lð
­{ä°äʎ ÊJÊ£ÈäÊ ‡“®
0525 Qwik-Lok
081-1205
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
i˜}̅Ê
mm
ÇxÊ
xäÊ
ÓxÎÊ
(inch)
­Ó°™x®
­£°™Ç®
­™°™È®
kg
ÎÊ
(lbs)
­È®
Maximum
Holding Capacity
mm
(inch)
Õ>Ê-Ì>̈œ˜Ê
££äÊ ­{°Îή
Weight
Ê
ÓʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
-ˆ˜}iÊ-Ì>̈œ˜Ê
1040 Qwik-Lok
1550 Qwik-Lok
Aluminum Base 5QL1040-AL
Cast Iron Base 5QL1040-CI
Aluminum Base 5QL1550-AL
Cast Iron Base 5QL1550-CI
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
i˜}̅Ê
Weight
Õ“ˆ˜Õ“Ê>ÃiÊ
>ÃÌÊÀœ˜Ê>ÃiÊ
mm
™xÊ
£ääÊ
{äxÊ
(inch)
­Î°Ç{®
­Î°™{®
­£x°™{®
kg
££Ê
£nÊ
(lbs)
­Ó{®
­Î™®
mm
£ÓäÊ
£xäÊ
xäÇÊ
(inch)
­{°ÇÓ®
­x°™£®
­£™°™È®
kg
Ó{Ê
{£Ê
(lbs)
­x{®
­n™®
(inch)
Weight
Õ“ˆ˜Õ“Ê>ÃiÊ
>ÃÌÊÀœ˜Ê>ÃiÊ
Maximum
œ`ˆ˜}Ê
>«>VˆÌÞÊ
““Ê ­ˆ˜V…®
Maximum
Holding Capacity
mm
Õ>Ê-Ì>̈œ˜Ê
£näÊ ­Ç°ä™®
Õ>Ê-Ì>̈œ˜Ê
ÓÓxÊ ­n°nÈ®
ÓʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
ÓÎxÊ ­™°Óx®
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
i˜}̅Ê
-ˆ˜}iÊ-Ì>̈œ˜Ê
ÓʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
ÎnäÊ ­£{°™È®
-ˆ˜}iÊ-Ì>̈œ˜Ê
{näÊ ­£n°™ä®
£Ê‡Ê7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜
£Ê‡Ê7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜
£Ê‡Ê7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜
Maximum Recommended
Torque Clamping Force
Maximum Recommended
Torque Clamping Force
Maximum Recommended
Torque Clamping Force
Ó]xÓäʏLðÊJÊ£{Êv̇Lð
­££°Óʎ ÊJÊ£™Ê ‡“®
x]äääʏLðÊJÊxÓÊv̇Lð
­ÓÓ°äʎ ÊJÊÇäÊ ‡“®
™]äääʏLðÊJÊ££nÊ̇Lð
­{ä°äʎ ÊJÊ£ÈäÊ ‡“®
QwikChangeTM Accessories
Mounting Accessories
*>}iÃÊÓӇΣ
*>}iÃÊÎ{‡Îx
™
VERTICAL WORKHOLDING
8,Ê-1-9-/
Obtain the benefits of a horizontal CNC
machine on a vertical CNC machine, by
using CHICK’s Indexer Subsystem package
­--®°ÊÊ1̈ˆâiÊ̅iʈ˜`iÝiÀÊޜÕʅ>ÛiÊ>˜`Ê
“>ÀÀÞʈÌÊ̜ʜ˜iʜvÊ
½ÃÊՏ̈‡œŽÃ°ÊÊ
The ISS gives you the ability to machine
on multiple part sides with only one
clamping, therefore decreasing the cycle
time and increasing accuracy of your part.
Indexer Subsystem (ISS) is most
commonly used when fractional
degree indexing is required.
All dimensions and systems include standard jaws. Indexer not
included. Additional center height is available with riser blocks.
Length
Height
œÕ˜`>̈œ˜Ê
Sold
Separately
Holding Capacity
Dual Station
£ä
Single Station
0520 (X2) 4 Sided ISS
ISS-082-4202
ˆ“i˜Ãˆœ˜ÃÊ
i˜}̅Ê
iˆ}…ÌÊ
““Ê ­ˆ˜V…®
xäxÊ ­£™°nn®
ÎäxÊ ­£Ó°ä£®
1040 6 Sided ISS
5IS1040-61
ˆ“i˜Ãˆœ˜ÃÊ
i˜}̅Ê
iˆ}…ÌÊ
““Ê ­ˆ˜V…®
xäxÊ ­£™°nn®
ÎxäÊ ­£Î°ÇÈ®
1550 4 Sided ISS
5IS1550-41
ˆ“i˜Ãˆœ˜ÃÊ
i˜}̅Ê
iˆ}…ÌÊ
““Ê ­ˆ˜V…®
ÈäxÊ ­ÓΰnÓ®
{xäÊ ­£Ç°ÇÓ®
Տ̈‡œŽÊ-«iVˆwV>̈œ˜Ã]Ê*>}iÃÊ£x‡Óä
Տ̈‡œŽÊ-«iVˆwV>̈œ˜Ã]Ê*>}iÃÊ£x‡Óä
Տ̈‡œŽÊ-«iVˆwV>̈œ˜Ã]Ê*>}iÃÊ£x‡Óä
Maximum
œ`ˆ˜}Ê
>«>VˆÌÞÊ
Maximum
œ`ˆ˜}Ê
>«>VˆÌÞÊ
““Ê ­ˆ˜V…®
Maximum
œ`ˆ˜}Ê
>«>VˆÌÞÊ
““Ê ­ˆ˜V…®
Õ>Ê-Ì>̈œ˜Ê
£näÊ ­Ç°ä™®
Õ>Ê-Ì>̈œ˜Ê
ÓÓxÊ ­n°nÈ®
““Ê ­ˆ˜V…®
Õ>Ê-Ì>̈œ˜Ê
nxÊ ­Î°Îx®
£ÈʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
£ÓʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
nʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
-ˆ˜}iÊ-Ì>̈œ˜Ê
-ˆ˜}iÊ-Ì>̈œ˜Ê
-ˆ˜}iÊ-Ì>̈œ˜Ê
£nxÊ ­Ç°Ón®
ÎnäÊ ­£{°™È®
{näÊ ­£n°™ä®
nʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
ÈʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
{ʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
Maximum Recommended
/œÀµÕiÊ
>“«ˆ˜}ʜÀVi
Maximum Recommended
/œÀµÕiÊ
>“«ˆ˜}ʜÀVi
Maximum Recommended
/œÀµÕiÊ
>“«ˆ˜}ʜÀVi
Ó]xÓäʏLðÊJÊ£{Êv̇Lð
­££°Óʎ ÊJÊ£™Ê ‡“®
x]äääʏLðÊJÊxÓÊv̇Lð
­ÓÓ°äʎ ÊJÊÇäÊ ‡“®
™]äääʏLðÊJÊ££nÊv̇Lð
­{ä°äʎ ÊJÊ£ÈäÊ ‡“®
0525 4 Sided ISS
ISS-082-4201
ˆ“i˜Ãˆœ˜ÃÊ
i˜}̅Ê
iˆ}…ÌÊ
““Ê ­ˆ˜V…®
ÎxxÊ ­£Î°™n®
ÎäxÊ ­£Ó°ä£®
1040 4 Sided ISS
5IS1040-41
ˆ“i˜Ãˆœ˜ÃÊ
i˜}̅Ê
iˆ}…ÌÊ
““Ê ­ˆ˜V…®
xäxÊ ­£™°nn®
ÎÓäÊ ­£Ó°Èä®
Տ̈‡œŽÊ-«iVˆwV>̈œ˜Ã]Ê*>}iÃÊ£x‡Óä
Տ̈‡œŽÊ-«iVˆwV>̈œ˜Ã]Ê*>}iÃÊ£x‡Óä
Maximum
œ`ˆ˜}Ê
>«>VˆÌÞÊ
““Ê ­ˆ˜V…®
Maximum
œ`ˆ˜}Ê
>«>VˆÌÞÊ
““Ê ­ˆ˜V…®
Õ>Ê-Ì>̈œ˜Ê
££äÊ ­{°Îή
Õ>Ê-Ì>̈œ˜Ê
£näÊ ­Ç°ä™®
nʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
-ˆ˜}iÊ-Ì>̈œ˜Ê
nʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
ÓÎxÊ ­™°Óx®
-ˆ˜}iÊ-Ì>̈œ˜Ê
ÎnäÊ ­£{°™È®
{ʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
{ʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
Maximum Recommended
/œÀµÕiÊ
>“«ˆ˜}ʜÀVi
Maximum Recommended
/œÀµÕiÊ
>“«ˆ˜}ʜÀVi
Ó]xÓäʏLðÊJÊ£{Êv̇Lð
­££°Óʎ ÊJÊ£™Ê ‡“®
x]äääʏLðÊJÊxÓÊv̇Lð
­ÓÓ°äʎ ÊJÊÇäÊ ‡“®
All Indexer Subsystems are
compatible with CHICK’s
{Ê-ˆ`i`]ÊÈÊ-ˆ`i`Ê>˜`Ê-«iVˆ>ÌÞÊ
­Ã“>Ê«>ÀÌîÊՏ̈‡œŽÃ°Ê
If you don’t find the product you
are looking for here, select a
Տ̈‡œŽÊvÀœ“Ê«>}iÃÊ£x‡Óä°
QwikChangeTM Accessories
Mounting Accessories
*>}iÃÊÓӇΣ
*>}iÃÊÎ{‡Îx
11
VERTICAL WORKHOLDING
* 1‡8
Take the Indexer Subsystem concept a
ÃÌi«ÊvÕÀ̅iÀ°ÊÊ*˜iՇiݽÃÊψ“ʈ˜`iÝiÀÊ
>œÜÃÊ̅iÊ*˜iՇiÝÊ̜ÊLiʓœÕ˜Ìi`ʈ˜Ê
the Y axis, thus providing usable space
̜ʓœÕ˜ÌÊiˆÌ…iÀʓՏ̈«iÊ*˜iՇiݽÃ]Ê
>Ê*˜iՇiÝÊ܈̅ʏ>À}iÊ«>ÌiÊܜÀŽÊœÀÊ
>Ê*˜iՇiÝÊ܈̅ÊÃiÛiÀ>Ê+܈Ž‡œŽÃ°ÊÊ
Included with the purchase of any
*˜iՇiÝÊ«>VŽ>}iʈÃÊ>ʜ՘`>̈œ˜
and factory installation by CHICK.
Pneu-Dex is the optimal solution for
your machine, combining all of the
following features into one footprint:
UÊ<iÀœÊ˜`iÝÊ̈“iÊ܈̅ʓՏ̈«iÊ*˜iՇiÝ°
UÊÊ>V…ˆ˜iÊ̅ÀiiÊ«>ÀÌÊÈ`iÃÊ܈̅ʜ˜Þʜ˜iÊV>“«ˆ˜}°
UÊ+܈Ž
…>˜}iÒÊyi݈LˆˆÌÞ°
UʓœÀ̈â>̈œ˜ÊœvÊ̜œÊV…>˜}iÊ̈“i°
UÊVVÕÀ>ÌiÊx¨Êˆ˜VÀi“i˜Ì>Êˆ˜`i݈˜}°
UÊ"vvÊVi˜ÌiÀÊÀˆ}ˆ`ˆÌÞʜvÊx£xÊv̇LðʭÇää ‡“®
UÊVVÕÀ>VÞʜvÊ´ÊxÊ>ÀVÊÃiVœ˜`ð
Length
All dimensions and systems include
standard jaws. Additional center height
is available with riser blocks.
Height
Width
ÓÓä ““
n°ÈȈ˜°
Holding Capacity
Dual Station
£Ó
Single Station
0520 (X2)
4 Sided Double Pneu-Dex
MPD082-4202-2
1040
4 Sided Double Pneu-Dex
5PD1040-41-02
0525
4 Sided Double Pneu-Dex
MPD082-4201-2
ˆ“i˜Ãˆœ˜ÃÊ
i˜}̅Ê
7ˆ`̅Ê
iˆ}…ÌÊ
ˆ“i˜Ãˆœ˜ÃÊ
i˜}̅Ê
7ˆ`̅Ê
iˆ}…ÌÊ
ˆ“i˜Ãˆœ˜ÃÊ
i˜}̅Ê
7ˆ`̅Ê
iˆ}…ÌÊ
““Ê
x™nÊ
x™äÊ
ÎÇäÊ
­ˆ˜V…®
­Óΰx{®
­ÓΰÓή
­£{°xÇ®
““Ê
x™nÊ
x™äÊ
ÎÇxÊ
­ˆ˜V…®
­Óΰx{®
­ÓΰÓή
­£{°ÇÈ®
““Ê
{{nÊ
x™äÊ
ÎÇäÊ
­ˆ˜V…®
­£Ç°È{®
­ÓΰÓή
­£{°xÇ®
Տ̈‡œŽÊ-«iVˆwV>̈œ˜Ã]Ê*>}iÊ£x
Տ̈‡œŽÊ-«iVˆwV>̈œ˜Ã]Ê*>}iÊ£x
Տ̈‡œŽÊ-«iVˆwV>̈œ˜Ã]Ê*>}iÊ£x
Maximum
œ`ˆ˜}Ê
>«>VˆÌÞÊ
Maximum
œ`ˆ˜}Ê
>«>VˆÌÞÊ
““Ê ­ˆ˜V…®
Maximum
œ`ˆ˜}Ê
>«>VˆÌÞÊ
““Ê ­ˆ˜V…®
Õ>Ê-Ì>̈œ˜Ê
£näÊ ­Ç°ä™®
Õ>Ê-Ì>̈œ˜Ê
££äÊ ­{°Îή
““Ê ­ˆ˜V…®
Õ>Ê-Ì>̈œ˜Ê
nxÊ ­Î°Îx®
ÎÓʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
£ÈʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
£ÈʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
-ˆ˜}iÊ-Ì>̈œ˜Ê
-ˆ˜}iÊ-Ì>̈œ˜Ê
-ˆ˜}iÊ-Ì>̈œ˜Ê
£nxÊ ­Ç°Ón®
ÎnäÊ ­£{°™È®
ÓÎxÊ ­™°Óx®
£ÈʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
nʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
nʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
Maximum Recommended
/œÀµÕiÊ
>“«ˆ˜}ʜÀVi
Maximum Recommended
/œÀµÕiÊ
>“«ˆ˜}ʜÀVi
Maximum Recommended
/œÀµÕiÊ
>“«ˆ˜}ʜÀVi
Ó]xÓäʏLðÊJÊ£{Êv̇Lð
­££°Óʎ ÊJÊ£™Ê ‡“®
x]äääʏLðÊJÊxÓÊv̇Lð
­ÓÓ°äʎ ÊJÊÇäÊ ‡“®
Ó]xÓäʏLðÊJÊ£{Êv̇Lð
­££°Óʎ ÊJÊ£™Ê ‡“®
0520 (X2)
4 Sided Triple Pneu-Dex
MPD082-4202-3
ˆ“i˜Ãˆœ˜ÃÊ
i˜}̅Ê
7ˆ`̅Ê
iˆ}…ÌÊ
““Ê
x™nÊ
n™äÊ
ÎÇäÊ
­ˆ˜V…®
­Óΰx{®
­Îx°ä{®
­£{°xÇ®
1040
4 Sided Triple Pneu-Dex
5PD1040-41-03
ˆ“i˜Ãˆœ˜ÃÊ
i˜}̅Ê
7ˆ`̅Ê
iˆ}…ÌÊ
““Ê
x™nÊ
n™äÊ
ÎÇxÊ
­ˆ˜V…®
­Óΰx{®
­Îx°ä{®
­£{°ÇÈ®
Տ̈‡œŽÊ-«iVˆwV>̈œ˜Ã]Ê*>}iÊ£x
Տ̈‡œŽÊ-«iVˆwV>̈œ˜Ã]Ê*>}iÊ£x
Maximum
œ`ˆ˜}Ê
>«>VˆÌÞÊ
Maximum
œ`ˆ˜}Ê
>«>VˆÌÞÊ
““Ê ­ˆ˜V…®
Õ>Ê-Ì>̈œ˜Ê
£näÊ ­Ç°ä™®
““Ê ­ˆ˜V…®
Õ>Ê-Ì>̈œ˜Ê
nxÊ ­Î°Îx®
{nʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
Ó{ʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
-ˆ˜}iÊ-Ì>̈œ˜Ê
-ˆ˜}iÊ-Ì>̈œ˜Ê
£nxÊ ­Ç°Ón®
ÎnäÊ ­£{°™È®
Ó{ʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
£ÓʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
Maximum Recommended
/œÀµÕiÊ
>“«ˆ˜}ʜÀVi
Maximum Recommended
/œÀµÕiÊ
>“«ˆ˜}ʜÀVi
Ó]xÓäʏLðÊJÊ£{Êv̇Lð
­££°Óʎ ÊJÊ£™Ê ‡“®
x]äääʏLðÊJÊxÓÊv̇Lð
­ÓÓ°äʎ ÊJÊÇäÊ ‡“®
Ê*˜iՇiÝÊÃÞÃÌi“ÃÊ>ÀiÊ
Vœ“«>̈LiÊ܈̅Êx䓓ʭӻ®ÊœÀÊ
£ä䓓ʭ{»®Ê{Ê-ˆ`i`]ÊÈÊ-ˆ`i`Ê>˜`Ê
-«iVˆ>ÌÞʭÓ>Ê«>ÀÌîÊՏ̈‡œŽÃ°Ê
If you don’t find the product you
are looking for here, select a
Տ̈‡œŽÊvÀœ“Ê«>}iÃÊ£x‡Óä°
-ˆ˜}iÊ*˜iՇiÝÊ܏Ṏœ˜ÃÊ>ÀiÊ>ÃœÊ
available.
QwikChangeTM Accessories
Mounting Accessories
*>}iÃÊÓӇΣ
*>}iÃÊÎ{‡Îx
13
HORIZONTAL WORKHOLDING
{Ê-Ê1/‡"{Ê-ˆ`i`ÊՏ̈‡œŽÃÊÌ>ŽiÊvՏÊ>`Û>˜Ì>}iÊ
of your horizontal CNC machine by
providing the accessibility of three part
È`iÃÊ­«iÀÊÃÌ>̈œ˜®]Ê̅ÕÃÊ`iVÀi>Ș}Ê̅iÊ
cycle time and increasing the accuracy of
your part.
All dimensions and systems include
standard jaws.
Swing
Diameter
Holding Capacity
Single Station
Dual Station
Height
Width
>Ãi«>ÌiʘœÌʈ˜VÕ`i`°
œÀÊ>Ãi«>Ìiʈ˜vœÀ“>̈œ˜]ÊÃiiÊ«>}iÃÊÎӇÎΰ
£{
4 Sided Multi-Loks are the
most versatile products
of their kind.
0520 4 sided Multi-Lok
082-4200
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
-܈˜}ʈ>“iÌiÀÊ
Weight
Ê
Maximum
Holding Capacity
Õ>Ê-Ì>̈œ˜Ê
mm
ÓäÎÊ
Ó£äÊ
Ó£ÈÊ
(inch)
­Ç°™™®
­n°ÓÇ®
­n°{™®
kg
£xÊ
(lbs)
­Îή
mm
(inch)
nxÊ ­Î°Îx®
nʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
-ˆ˜}iÊ-Ì>̈œ˜Ê
1030 4 sided Multi-Lok
5ML1030-41
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
-܈˜}ʈ>“iÌiÀÊ
mm
ÎäxÊ
Ó{äÊ
ÓÈäÊ
(inch)
­£Ó°ä£®
­™°{x®
­£ä°Ó{®
kg
ÎÇÊ
(lbs)
­n£®
Maximum
Holding Capacity
mm
(inch)
Õ>Ê-Ì>̈œ˜Ê
£ÎäÊ ­x°£Ó®
Weight
Ê
nʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
£nxÊ ­Ç°Ón®
-ˆ˜}iÊ-Ì>̈œ˜Ê
1540 4 sided Multi-Lok
5ML1540-41
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
-܈˜}ʈ>“iÌiÀÊ
mm
{äÇÊ
ÎääÊ
ÎÎ{Ê
(inch)
­£È°äÓ®
­££°n£®
­£Î°£x®
kg
näÊ
(lbs)
­£ÇÇ®
Maximum
Holding Capacity
mm
(inch)
Õ>Ê-Ì>̈œ˜Ê
£ÇxÊ ­È°n™®
Weight
Ê
nʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
ÓnäÊ ­££°äÓ®
-ˆ˜}iÊ-Ì>̈œ˜Ê
ÎnäÊ ­£{°™È®
{ʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
{ʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
{ʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
Maximum Recommended
Torque Clamping Force
Maximum Recommended
Torque Clamping Force
Maximum Recommended
Torque Clamping Force
Ó]xÓäʏLðÊJÊ£{Êv̇Lð
­££°Óʎ ÊJÊ£™Ê ‡“®
x]äääʏLðÊJÊxÓÊv̇Lð
­ÓÓ°äʎ ÊJÊÇäÊ ‡“®
™]äääʏLðÊJÊ££nÊv̇Lð
­{ä°äʎ ÊJÊ£ÈäÊ ‡“®
0525 4 sided Multi-Lok
082-4201
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
-܈˜}ʈ>“iÌiÀÊ
mm
ÓxÎÊ
Ó£äÊ
Ó£ÈÊ
(inch)
­™°™È®
­n°ÓÇ®
­n°{™®
kg
£™Ê
(lbs)
­{Ó®
Maximum
Holding Capacity
mm
(inch)
Õ>Ê-Ì>̈œ˜Ê
££äÊ ­{°Îή
Weight
Ê
nʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
-ˆ˜}iÊ-Ì>̈œ˜Ê
1040 4 sided Multi-Lok
5ML1040-41
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
-܈˜}ʈ>“iÌiÀÊ
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
-܈˜}ʈ>“iÌiÀÊ
mm
xäÇÊ
ÎääÊ
ÎÎ{Ê
(inch)
­£™°™È®
­££°n£®
­£Î°£x®
Ž}Ê
™ÎÊ
­Lî
­ÓäÈ®
Maximum
Holding Capacity
mm
(inch)
Õ>Ê-Ì>̈œ˜Ê
ÓÓxÊ ­n°nÈ®
mm
{äxÊ
Ó{äÊ
ÓÈäÊ
(inch)
­£x°™{®
­™°{x®
­£ä°Ó{®
kg
{ÇÊ
(lbs)
­£äή
7iˆ}…ÌÊ
Ê
Maximum
Holding Capacity
mm
(inch)
Õ>Ê-Ì>̈œ˜Ê
£näÊ ­Ç°ä™®
Weight
Ê
nʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
ÓÎxÊ ­™°Óx®
1550 4 sided Multi-Lok
5ML1550-41
-ˆ˜}iÊ-Ì>̈œ˜Ê
nʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
ÎnäÊ ­£{°™È®
-ˆ˜}iÊ-Ì>̈œ˜Ê
{näÊ ­£n°™ä®
{ʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
{ʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
{ʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
Maximum Recommended
Torque Clamping Force
Maximum Recommended
Torque Clamping Force
Maximum Recommended
Torque Clamping Force
Ó]xÓäʏLðÊJÊ£{Êv̇Lð
­££°Óʎ ÊJÊ£™Ê ‡“®
x]äääʏLðÊJÊxÓÊv̇Lð
­ÓÓ°äʎ ÊJÊÇäÊ ‡“®
™]äääʏLðÊJÊ££nÊv̇Lð
­{ä°äʎ ÊJÊ£ÈäÊ ‡“®
QwikChangeTM Accessories
Mounting Accessories
*>}iÃÊÓӇΣ
*>}iÃÊÎ{‡Îx
15
HORIZONTAL WORKHOLDING
ÈÊ-Ê1/‡"ÈÊ-ˆ`i`ÊՏ̈‡œŽÃÊ«ÀœÛˆ`iÊ̅iÊyi݈LˆˆÌÞÊ
and versatility of six complete dual
station workspaces in one compact
footprint maximizing the quantity of
parts presented to the spindle.
All dimensions and systems include
standard jaws.
Swing
Diameter
Holding Capacity
Single Station
Dual Station
Height
Width
>Ãi«>ÌiʘœÌʈ˜VÕ`i`°
œÀÊ>Ãi«>Ìiʈ˜vœÀ“>̈œ˜]ÊÃiiÊ«>}iÃÊÎӇÎΰ
16
6 Sided Multi-Loks are most commonly
used with applications requiring
high volume production.
0520 6 sided Multi-Lok
082-6200
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
-܈˜}ʈ>“iÌiÀÊ
mm
ÓäÎÊ
ÓÎäÊ
ÓÎxÊ
(inch)
­Ç°™™®
­™°äÈ®
­™°Óx®
kg
ÓäÊ
(lbs)
­{{®
mm
(inch)
Weight
Ê
Maximum
Holding Capacity
Õ>Ê-Ì>̈œ˜Ê
nxÊ ­Î°Îx®
1030 6 sided Multi-Lok
5ML1030-61
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
-܈˜}ʈ>“iÌiÀÊ
mm
ÎäxÊ
ÎääÊ
ΣÈÊ
(inch)
­£Ó°ä£®
­££°n£®
­£Ó°{{®
kg
xnÊ
Maximum
Holding Capacity
mm
Õ>Ê-Ì>̈œ˜Ê
£ÎäÊ ­x°£Ó®
Weight
Ê
1540 6 sided Multi-Lok
5ML1540-61
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
-܈˜}ʈ>“iÌiÀÊ
mm
{äÇÊ
{£äÊ
{ÎÈÊ
(inch)
­£È°äÓ®
­£È°£{®
­£Ç°£Ç®
(lbs)
­£Ón®
Weight
Ê
kg
£ÎnÊ
(lbs)
­Îä{®
(inch)
Maximum
Holding Capacity
mm
(inch)
Õ>Ê-Ì>̈œ˜Ê
£ÇxÊ ­È°n™®
£ÓʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
£ÓʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
£ÓʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
-ˆ˜}iÊ-Ì>̈œ˜Ê
-ˆ˜}iÊ-Ì>̈œ˜Ê
-ˆ˜}iÊ-Ì>̈œ˜Ê
£nxÊ ­Ç°Ón®
ÓnäÊ ­££°äÓ®
ÎnäÊ ­£{°™È®
ÈʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
ÈʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
ÈʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
Maximum Recommended
Torque Clamping Force
Maximum Recommended
Torque Clamping Force
Maximum Recommended
Torque Clamping Force
Ó]xÓäʏLðÊJÊ£{Êv̇Lð
­££°Óʎ ÊJÊ£™Ê ‡“®
x]äääʏLðÊJÊxÓÊv̇Lð
­ÓÓ°äʎ ÊJÊÇäÊ ‡“®
™]äääʏLðÊJÊ££nÊv̇Lð
­{ä°äʎ ÊJÊ£ÈäÊ ‡“®
0525 6 sided Multi-Lok
082-6201
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
-܈˜}ʈ>“iÌiÀÊ
mm
ÓxÎÊ
ÓÎäÊ
ÓÎxÊ
(inch)
­™°™È®
­™°äÈ®
­™°Óx®
kg
ÓÎÊ
(lbs)
­x£®
Maximum
Holding Capacity
mm
(inch)
Õ>Ê-Ì>̈œ˜Ê
££äÊ ­{°Îή
Weight
Ê
1040 6 sided Multi-Lok
5ML1040-61
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
-܈˜}ʈ>“iÌiÀÊ
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
-܈˜}ʈ>“iÌiÀÊ
mm
xäÇÊ
{£äÊ
{ÎÈÊ
(inch)
­£™°™È®
­£È°£{®
­£Ç°£Ç®
(lbs)
­£Èx®
Weight
Ê
kg
£ÈÓÊ
(lbs)
­ÎxÈ®
(inch)
Maximum
Holding Capacity
mm
(inch)
Õ>Ê-Ì>̈œ˜Ê
ÓÓxÊ ­n°nÈ®
mm
{äxÊ
ÎääÊ
ΣÈÊ
(inch)
­£x°™{®
­££°n£®
­£Ó°{{®
kg
ÇxÊ
Maximum
Holding Capacity
mm
Õ>Ê-Ì>̈œ˜Ê
£näÊ ­Ç°ä™®
Weight
Ê
1550 6 sided Multi-Lok
5ML1550-61
£ÓʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
£ÓʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
£ÓʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
-ˆ˜}iÊ-Ì>̈œ˜Ê
-ˆ˜}iÊ-Ì>̈œ˜Ê
-ˆ˜}iÊ-Ì>̈œ˜Ê
ÓÎxÊ ­™°Óx®
ÎnäÊ ­£{°™È®
{näÊ ­£n°™ä®
ÈʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
ÈʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
ÈʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
Maximum Recommended
Torque Clamping Force
Maximum Recommended
Torque Clamping Force
Maximum Recommended
Torque Clamping Force
Ó]xÓäʏLðÊJÊ£{Êv̇Lð
­££°Óʎ ÊJÊ£™Ê ‡“®
x]äääʏLðÊJÊxÓÊv̇Lð
­ÓÓ°äʎ ÊJÊÇäÊ ‡“®
™]äääʏLðÊJÊ££nÊv̇Lð
­{ä°äʎ ÊJÊ£ÈäÊ ‡“®
QwikChangeTM Accessories
Mounting Accessories
*>}iÃÊÓӇΣ
*>}iÃÊÎ{‡Îx
17
HORIZONTAL WORKHOLDING
-*
/9Ê1/‡"­-Ê*,/-®
-«iVˆ>ÌÞÊՏ̈‡œŽÃÊ>ÀiÊ`iÈ}˜i`Ê܈̅Ê
specific applications in mind. CHICK
…>ÃÊ`iÛiœ«i`Ê>Ê}ÀœÕ«ÊœvÊՏ̈‡œŽÃÊ
for small part applications or machines
with a limited work envelope, without
sacrificing the simplicity and flexibility of
the System 5 product line.
ˆ˜>Þ]ÊܜÀŽ…œ`ˆ˜}Ê`iÈ}˜i`Ê܈̅ÊޜÕÀÊ
application in mind!
All dimensions and systems include
standard jaws.
Swing
Diameter
Width
Holding Capacity
Dual Station
Height
Single Station
>Ãi«>ÌiʘœÌʈ˜VÕ`i`°
œÀÊ>Ãi«>Ìiʈ˜vœÀ“>̈œ˜]ÊÃiiÊ«>}iÃÊÎӇÎΰ
£n
Specialty Multi-Loks are the perfect
solution for small part applications
or machines with a limited work
envelope.
0520 (x2) 4 sided Multi-Lok
082-4202
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
-܈˜}ʈ>“iÌiÀÊ
mm
{ÓÎÊ
Ó£äÊ
Ó£ÈÊ
(inch)
­£È°Èx®
­n°ÓÇ®
­n°{™®
kg
ÎäÊ
(lbs)
­Èx®
mm
(inch)
Weight
Ê
Maximum
Holding Capacity
Õ>Ê-Ì>̈œ˜Ê
nxÊ ­Î°Îx®
0520 (x2) 6 sided Multi-Lok
082-6202
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
-܈˜}ʈ>“iÌiÀÊ
mm
{ÓÎÊ
ÓÎäÊ
ÓÎxÊ
(inch)
­£È°Èx®
­™°äÈ®
­™°Óx®
kg
{äÊ
(lbs)
­nn®
mm
(inch)
Weight
Ê
Maximum
Holding Capacity
Õ>Ê-Ì>̈œ˜Ê
nxÊ ­Î°Îx®
£ÈʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
Ó{ʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
-ˆ˜}iÊ-Ì>̈œ˜Ê
-ˆ˜}iÊ-Ì>̈œ˜Ê
£nxÊ ­Ç°Ón®
£nxÊ ­Ç°Ón®
nʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
£ÓʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
Maximum Recommended
Torque Clamping Force
Maximum Recommended
Torque Clamping Force
Ó]xÓäʏLðÊJÊ£{Êv̇Lð
­££°Óʎ ÊJÊ£™Ê ‡“®
Ó]xÓäʏLðÊJÊ£{Êv̇Lð
­££°Óʎ ÊJÊ£™Ê ‡“®
QwikChangeTM Accessories
Mounting Accessories
*>}iÃÊÓӇΣ
*>}iÃÊÎ{‡Îx
£™
HORIZONTAL WORKHOLDING
-*
/9Ê1/‡"­,Ê*,/-®
/…ˆÃÊ}ÀœÕ«ˆ˜}ʜvÊ-«iVˆ>ÌÞÊՏ̈‡œŽÃÊ
is designed to hold large parts while
maximizing the efficiency of your
machine. No need to waste time
completely switching fixtures. Simply,
ÃiiVÌÊ̅iÊՏ̈‡œŽÊ̅>ÌÊwÌÃʈ˜ÊޜÕÀÊ
machining envelope and change your
setups in minutes.
Swing Diameter
16
Station
Width
£Ó
Station
Width
Holding Capacity
Dual Station
Height
Single Station
All dimensions and systems include
standard jaws.
Every 12- and 16-Station Multi-Lok
must be shipped with a baseplate.
For Baseplate information, see pages 32-33.
Óä
12 & 16 Station Multi-Loks provide
the flexibility of being able to hold
one extremely large part over multiple
stations or clamping multiple average
sized parts.
1040 12 Station Multi-Lok
5ML1040-41-12
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
-܈˜}ʈ>“iÌiÀÊ
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
-܈˜}ʈ>“iÌiÀÊ
mm
x£™Ê
xääÊ
xÓäÊ
(inch)
­Óä°{ή
­£™°È™®
­Óä°x£®
(lbs)
­£nä®
Weight
Ê
kg
£nnÊ
(lbs)
­{£{®
(inch)
Maximum
Holding Capacity
mm
(inch)
Õ>Ê-Ì>̈œ˜Ê
ÓÓxÊ ­n°nÈ®
mm
{£ÓÊ
{ääÊ
{£ÓÊ
(inch)
­£È°ÓÓ®
­£x°Çx®
­£È°ÓÓ®
kg
nÓÊ
Maximum
Holding Capacity
mm
Õ>Ê-Ì>̈œ˜Ê
£näÊ ­Ç°ä™®
Weight
Ê
1550 12 Station Multi-Lok
5ML1550-41-12
£ÓʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
£ÈʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
-ˆ˜}iÊ-Ì>̈œ˜Ê
-ˆ˜}iÊ-Ì>̈œ˜Ê
ÎnäÊ ­£{°™È®
{näÊ ­£n°™ä®
ÈʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
nʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
Maximum Recommended
Torque Clamping Force
Maximum Recommended
Torque Clamping Force
x]äääʏLðÊJÊxÓÊv̇Lð
­ÓÓ°äʎ ÊJÊÇäÊ ‡“®
™]äääʏLðÊJÊ££nÊv̇Lð
­{ä°äʎ ÊJÊ£ÈäÊ ‡“®
1040 16 Station Multi-Lok
5ML1040-41-16
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
-܈˜}ʈ>“iÌiÀÊ
mm
{£ÓÊ
{ääÊ
{ÇÈÊ
(inch)
­£È°ÓÓ®
­£x°Çx®
­£n°Ç{®
Weight
Ê
kg
£{äÊ
Maximum
Holding Capacity
mm
Õ>Ê-Ì>̈œ˜Ê
£näÊ ­Ç°ä™®
1550 16 Station Multi-Lok
5ML1550-41-16
Dimensions
iˆ}…ÌÊ
7ˆ`̅Ê
-܈˜}ʈ>“iÌiÀÊ
mm
x£™Ê
xääÊ
Èä™Ê
(inch)
­Óä°{ή
­£™°È™®
­Óΰ™n®
(lbs)
­Îän®
Weight
Ê
kg
ÓÇ{Ê
(lbs)
­Èäή
(inch)
Maximum
Holding Capacity
mm
(inch)
Õ>Ê-Ì>̈œ˜Ê
ÓÓxÊ ­n°nÈ®
£ÓʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
£ÈʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
-ˆ˜}iÊ-Ì>̈œ˜Ê
-ˆ˜}iÊ-Ì>̈œ˜Ê
ÎnäÊ ­£{°™È®
{näÊ ­£n°™ä®
ÈʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
nʇÊ7œÀŽ…œ`ˆ˜}Ê-Ì>̈œ˜Ã
Maximum Recommended
Torque Clamping Force
Maximum Recommended
Torque Clamping Force
x]äääʏLðÊJÊxÓÊv̇Lð
­ÓÓ°äʎ ÊJÊÇäÊ ‡“®
™]äääʏLðÊJÊ££nÊv̇Lð
­{ä°äʎ ÊJÊ£ÈäÊ ‡“®
QwikChangeTM Accessories
Mounting Accessories
*>}iÃÊÓӇΣ
*>}iÃÊÎ{‡Îx
Ó£
ACCESSORIES (QWIKCHANGE™)
ONE SYSTEM
ENDLESS OPPORTUNITIES
Dual Station Machinable Jaw Sets
Standard
Chick Workholding was designed with
flexibility in mind!
Maximize your productivity and drastically
reduce your repeat setup time, thereby
unleashing milling profitability.
Wide
High
Oversized
Ideal for holding two or four
λÊ̜Ên»Ê«>ÀÌð
-iiÊ«>}iÃÊÓ{‡ÓxÊvœÀʜÀ`iÀˆ˜}ʈ˜vœÀ“>̈œ˜°
GRIPPERS
Single Station Machinable Jaw Sets
Standard
Wide
High
Oversized
Ideal for holding one large
n»Ê̜ʣ™»Ê«>ÀÌ°
-iiÊ«>}iÃÊÓȇÓÇÊvœÀʜÀ`iÀˆ˜}ʈ˜vœÀ“>̈œ˜°
Ideal for workpieces that require
aggressive clamping
-iiÊ«>}iÃÊÎӇÎÎÊvœÀʜÀ`iÀˆ˜}ʈ˜vœÀ“>̈œ˜°
Machinable Faceplates
Standard
Wide
High
Oversized
Ideal for holding numerous
small parts or parts that are
difficult to clamp.
-iiÊ«>}iÃÊÓn‡Ó™ÊvœÀʜÀ`iÀˆ˜}ʈ˜vœÀ“>̈œ˜°
Jaw Carrier Sets
Dual Station Set
Single Station Set
`i>ÊvœÀʺۈÃiʏˆŽi»ÊÃiÌÕ«
-iiÊ«>}iÃÊÎä‡Î£ÊvœÀʜÀ`iÀˆ˜}ʈ˜vœÀ“>̈œ˜°
ÓÓ
Conversion Faceplates
6 Systems
nÊ-ÞÃÌi“Ã
ÓÊ-ÞÃÌi“Ã
£äÊ-ÞÃÌi“Ã
Ideal for clamping a variety
of part sizes.
-iiÊ«>}iÃÊÎӇÎÎÊvœÀʜÀ`iÀˆ˜}ʈ˜vœÀ“>̈œ˜°
Select from a wide variety
œvÊi>ÃÞÊÃi̇իʓ>V…ˆ˜>LiÊ
accessories:
ÓÎ
ACCESSORIES (QWIKCHANGE™)
DUAL STATION
Ê7Ê-/-
Standard Jaw Set
Dual Station Machinable
/…iÊÕ>Ê-Ì>̈œ˜Ê>V…ˆ˜>LiÊ>Ü
Sets clamp with an equal and opposing
inward force, thus eliminating the
potential for jaw lift. The safe low
profile jaw interface maximizes the
amount of machinable area, giving
the ability to hold larger parts.
B
C
B
D
A
Size
E
E
Set includes:
­Ó®ÊœÛi>LiÊ>ÜÃ
­£®ÊˆÝi`Ê
i˜ÌiÀÊ>Ü
*Max Holding Capacity
High Jaw Set
Dual Station Machinable
B
C
B
D
A
Size
E
E
Set includes:
­Ó®ÊœÛi>LiÊ>ÜÃ
­£®ÊˆÝi`Ê
i˜ÌiÀÊ>Ü
*Max Holding Capacity
Wide Jaw Set
Dual Station Machinable
B
C
B
D
A
Size
E
Machinable accessories are the optimal
܏Ṏœ˜ÊvœÀÊÀi«i>ÌÊÃi̇իðÊÊ/…iÊÃÌ>˜`>À`Ê
height and width is suitable for most
applications. CHICK has designed wide,
high and oversized accessories to provide
a cost effective solution for those unique
applications.
E
Set includes:
­Ó®ÊœÛi>LiÊ>ÜÃ
­£®ÊˆÝi`Ê
i˜ÌiÀÊ>Ü
*Max Holding Capacity
Oversized Jaw Set
Dual Station Machinable
B
C
B
A
Size
E
E
Set includes:
­Ó®ÊœÛi>LiÊ>ÜÃ
­£®ÊˆÝi`Ê
i˜ÌiÀÊ>Ü
*Max Holding Capacity
œÀʓ>V…ˆ˜>LiÊ>Ài>ÊۈÈÌʜÀÊÜiLÈÌiÊÜÜÜ°
…ˆVŽ7œÀŽ…œ`ˆ˜}°Vœ“
Ó{
D
System Sizes
0520 and 0525
1030 and 1040
1540 and 1550
080-2500
080-2505
5DS
1030-10-40
5DS
1040-10-40
5DS
1540-15-50
5DS
1550-15-50
Dimensions
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
A
Ê {™Ê ­£°™Î®
Ê {™Ê ­£°™Î®
Ê ™™Ê ­Î°™ä®
Ê ™™Ê ­Î°™ä®
Ê£{nÊ ­x°nή
Ê£{nÊ ­x°nή
Ê ÇxÊ ­Ó°™x®Ê
Ê ÇxÊ ­Ó°™x®
Ê£äxÊ ­{°£Î®
Ê£ÎäÊ ­x°£Ó®
Ê£ÎxÊ ­x°Î£®
Ê£ÈäÊ ­È°Îä®
Order No.
C
Ê ÎÈÊ ­£°{Ó®Ê
Ê ÇÈÊ ­Ó°™™®
Ê ÇäÊ ­Ó°ÇÈ®
Ê££äÊ ­{°Îή
Ê£ääÊ ­Î°™{®
Ê£{äÊ ­x°x£®
D
Ê ÓxÊ ­ä°™n®Ê
Ê ÓxÊ ­ä°™n®
Ê {äÊ ­£°xÇ®
Ê {äÊ ­£°xÇ®
Ê xäÊ ­£°™Ç®
Ê xäÊ ­£°™Ç®
E
ÊÊnxÊ ­Î°Îx®
Ê££äÊ ­{°Îή
Ê£ÎäÊ ­x°£Ó®
Ê£näÊ ­Ç°ä™®
Ê£ÇxÊ ­È°n™®
ÊÓÓxÊ ­n°nÈ®
Order No.
5DS
1030-10-55
5DS
1040-10-55
5DS
1540-15-70
5DS
1550-15-70
Dimensions
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
Ê ™™Ê ­Î°™ä®
Ê ™™Ê ­Î°™ä®
Ê£{nÊ ­x°nή
Ê£{nÊ ­x°nή
Ê£äxÊ ­{°£Î®
Ê£ÎäÊ ­x°£Ó®
Ê£ÎxÊ ­x°Î£®
Ê£ÈäÊ ­È°Îä®
A
NOT
6
IN
/-Ê-<
Ê ÇäÊ ­Ó°ÇÈ®
Ê££äÊ ­{°Îή
Ê£ääÊ ­Î°™{®
Ê£{äÊ ­x°x£®
D
Ê xxÊ ­Ó°£Ç®
Ê xxÊ ­Ó°£Ç®
Ê ÇäÊ ­Ó°ÇÈ®
Ê ÇäÊ ­Ó°ÇÈ®
E
Ê£ÎäÊ ­x°£Ó®
Ê£näÊ ­Ç°ä™®
Ê£ÇxÊ ­È°n™®
ÊÓÓxÊ ­n°nÈ®
Order No.
5DS
1030-15-40
5DS
1040-15-40
5DS
1540-20-50
5DS
1550-20-50
ʓ“Ê ­ˆ˜V…®
““Ê ­ˆ˜V…®
““Ê ­ˆ˜V…®
““Ê ­ˆ˜V…®
Ê£{nÊ ­x°nή
Ê£{nÊ ­x°nή
Ê£™nÊ ­Ç°nä®
Ê£™nÊ ­Ç°nä®
Ê£äxÊ ­{°£Î®
Ê£ÎäÊ ­x°£Ó®
Ê£ÎxÊ ­x°Î£®
Ê£ÈäÊ ­È°Îä®
Ê ÇäÊ ­Ó°ÇÈ®
Ê££äÊ ­{°Îή
Ê£ääÊ ­Î°™{®
Ê£{äÊ ­x°x£®
D
Ê {äÊ ­£°xÇ®
Ê {äÊ ­£°xÇ®
Ê xäÊ ­£°™Ç®
Ê xäÊ ­£°™Ç®
E
Ê£ÎäÊ ­x°£Ó®
Ê£näÊ ­Ç°ä™®
Ê£ÇxÊ ­È°n™®
ÊÓÓxÊ ­n°nÈ®
C
Dimensions
A
C
NOT
6
IN
/-Ê-<
080-2502
080-2506
5DS
1030-15-55
5DS
1040-15-55
5DS
1540-20-70
5DS
1550-20-70
Dimensions
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
A
Ê näÊ ­Î°£x®
Ê näÊ ­Î°£x®
Ê£{nÊ ­x°nή
Ê£{nÊ ­x°nή
Ê£™nÊ ­Ç°nä®
Ê£™nÊ ­Ç°nä®
Ê ÇxÊ ­Ó°™x®
Ê ÇxÊ ­Ó°™x®
Ê£äxÊ ­{°£Î®
Ê£ÎäÊ ­x°£Ó®
Ê£ÎxÊ ­x°Î£®
Ê£ÈäÊ ­È°Îä®
C
Ê ÎÈÊ ­£°{Ó®
Ê ÇÈÊ ­Ó°™™®
Ê ÇäÊ ­Ó°ÇÈ®
Ê££äÊ ­{°Îή
Ê£ääÊ ­Î°™{®
Ê£{äÊ ­x°x£®
D
Ê ÎxÊ ­£°În®
Ê ÎxÊ ­£°În®
Ê xxÊ ­Ó°£Ç®
Ê xxÊ ­Ó°£Ç®
Ê ÇäÊ ­Ó°ÇÈ®
Ê ÇäÊ ­Ó°ÇÈ®
E
Ê nxÊ ­Î°Îx®
Ê££äÊ ­{°Îή
Ê£ÎäÊ ­x°£Ó®
Ê£näÊ ­Ç°ä™®
Ê£ÇxÊ ­È°n™®
ÊÓÓxÊ ­n°nÈ®
Order No.
Óx
ACCESSORIES (QWIKCHANGE™)
SINGLE STATION
Ê7Ê-/-
Standard Jaw Set
Single Station Machinable
-ˆ˜}iÊ-Ì>̈œ˜Ê>V…ˆ˜>LiÊ>ÜÊ-iÌÃÊ
increase the flexibility of your system by
eliminating the need to completely switch
fixtures for jobs requiring greater holding
capacity. Simply QwikChangeTM the jaws
>˜`Ê̅iÊÃi̇իʈÃÊÀi>`Þʈ˜Ê“ˆ˜ÕÌið
B
B
C
A
Size
D
*Min Holding Capacity
E
Set includes:
*Max Holding Capacity
­£®ÊœÛi>LiÊ>Ü
­£®ÊˆÝi`Ê-ˆ˜}iÊ-Ì>̈œ˜Ê>Ü
High Jaw Set
Single Station Machinable
B
B
C
A
Size
D
*Min Holding Capacity
E
Set includes:
*Max Holding Capacity
­£®ÊœÛi>LiÊ>Ü
­£®ÊˆÝi`Ê-ˆ˜}iÊ-Ì>̈œ˜Ê>Ü
Wide Jaw Set
Single Station Machinable
B
B
C
A
Size
D
*Min Holding Capacity
E
Machinable accessories are the
œ«Ìˆ“>Ê܏Ṏœ˜ÊvœÀÊÀi«i>ÌÊÃi̇իðÊÊ
The standard height and width
is suitable for most applications.
CHICK has designed wide, high and
oversized accessories to provide
a cost effective solution for those
unique applications.
Set includes:
*Max Holding Capacity
­£®ÊœÛi>LiÊ>Ü
­£®ÊˆÝi`Ê-ˆ˜}iÊ-Ì>̈œ˜Ê>Ü
Oversized Jaw Set
Single Station Machinable
B
B
A
Size
D
*Min Holding Capacity
E
Set includes:
­£®ÊœÛi>LiÊ>Ü
­£®ÊˆÝi`Ê-ˆ˜}iÊ-Ì>̈œ˜Ê>Ü
*Max Holding Capacity
œÀʓ>V…ˆ˜>LiÊ>Ài>ÊۈÈÌʜÀÊÜiLÈÌiÊÜÜÜ°
…ˆVŽ7œÀŽ…œ`ˆ˜}°Vœ“
*CHICK provides a variety of coverplates for extended travel.
Contact CHICK for additional information.
ÓÈ
C
System Sizes
0520 and 0525
1030 and 1040
1540 and 1550
Order No.
082-2580
080-2580
5SS
1030-10-40
5SS
1040-10-40
5SS
1540-15-50
5SS
1550-15-50
Dimensions
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
A
Ê {™Ê ­£°™£®
Ê {™Ê ­£°™£®
Ê ™™Ê ­Î°™ä®
Ê ™™Ê ­Î°™ä®
Ê£{nÊ ­x°nή
Ê£{nÊ ­x°nή
Ê ÇxÊ ­Ó°™x®
Ê ÇxÊ ­Ó°™x®
Ê£äxÊ ­{°£Î®
Ê£ÎäÊ ­x°£Ó®
Ê£ÎxÊ ­x°Î£®
Ê£ÈäÊ ­È°Îä®
C
Ê ÓxÊ ­ä°™n®
Ê ÓxÊ ­ä°™n®
Ê {äÊ ­£°xÇ®
Ê {äÊ ­£°xÇ®
Ê xäÊ ­£°™Ç®
Ê xäÊ ­£°™Ç®
D
Ê x{Ê ­Ó°£Î®
Ê ™™Ê ­Î°™ä®
Ê ™äÊ ­Î°x{®
Ê£ÓxÊ ­{°™Ó®
Ê£ÓxÊ ­{°™Ó®
Ê£ÇäÊ ­È°È™®
E
Ê£nxÊ ­Ç°Ón®
ÊÓÎxÊ ­™°Óx®
ÊÓnäÊ ­££°äÓ®Ê
ÊÎnäÊ ­£{°™È®
ÊÎnäÊ ­£{°™È®
Ê{näÊ ­£n°™ä®
5SS
1030-10-55
5SS
1040-10-55
5SS
1540-15-70
5SS
1550-15-70
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
Ê ™™Ê ­Î°™ä®
Ê ™™Ê ­Î°™ä®
Ê£{nÊ ­x°nή
Ê£{nÊ ­x°nή
Ê£äxÊ ­{°£Î®
Ê£ÎäÊ ­x°£Ó®
Ê£ÎxÊ ­x°Î£®
Ê£ÈäÊ ­È°Îä®
Ê xxÊ ­Ó°£Ç®
Ê xxÊ ­Ó°£Ç®
Ê ÇäÊ ­Ó°ÇÈ®
Ê ÇäÊ ­Ó°ÇÈ®
D
Ê ™äÊ ­Î°x{®
Ê£ÓxÊ ­{°™Ó®
Ê£ÓxÊ ­{°™Ó®
Ê£ÇäÊ ­È°È™®
E
ÊÓnäÊ ­££°äÓ®
ÊÎnäÊ ­£{°™È®
ÊÎnäÊ ­£{°™È®
Ê{näÊ ­£n°™ä®
Order No.
5SS
1030-15-40
5SS
1040-15-40
5SS
1540-20-50
5SS
1550-20-50
““Ê ­ˆ˜V…®
““Ê ­ˆ˜V…®
““Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
Ê£{nÊ ­x°nή
Ê£{nÊ ­x°nή
Ê£™nÊ ­Ç°nä®
Ê£™nÊ ­Ç°nä®
Ê£äxÊ ­{°£Î®
Ê£ÎäÊ ­x°£Ó®
Ê£ÎxÊ ­x°Î£®
Ê£ÈäÊ ­È°Îä®
Ê {äÊ ­£°xÇ®
Ê {äÊ ­£°xÇ®
Ê xäÊ ­£°™Ç®
Ê xäÊ ­£°™Ç®
D
Ê ™äÊ ­Î°x{®
Ê£ÓxÊ ­{°™Ó®
Ê£ÓxÊ ­{°™Ó®
Ê£ÇäÊ ­È°È™®
E
ÊÓnäÊ ­££°äÓ®
ÊÎnäÊ ­£{°™È®
ÊÎnäÊ ­£{°™È®
Ê{näÊ ­£n°™ä®
Order No.
Dimensions
A
C
NOT
6
IN
/-Ê-<
Dimensions
A
C
NOT
6
IN
/-Ê-<
Order No.
080-2582
080-2582
5SS
1030-15-55
5SS
1040-15-55
5SS
1540-20-70
5SS
1550-20-70
Dimensions
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
A
Ê näÊ ­Î°£x®
Ê näÊ ­Î°£x®
Ê£{nÊ ­x°nή
Ê£{nÊ ­x°nή
Ê£™nÊ ­Ç°nä®
Ê£™nÊ ­Ç°nä®
Ê ÇxÊ ­Ó°™x®
Ê ÇxÊ ­Ó°™x®
Ê£äxÊ ­{°£Î®
Ê£ÎäÊ ­x°£Ó®
Ê£ÎxÊ ­x°Î£®
Ê£ÈäÊ ­È°Îä®
C
Ê ÎxÊ ­£°În®
Ê ÎxÊ ­£°În®
Ê xxÊ ­Ó°£Ç®
Ê xxÊ ­Ó°£Ç®
Ê ÇäÊ ­Ó°ÇÈ®
Ê ÇäÊ ­Ó°ÇÈ®
D
Ê x{Ê ­Ó°£Î®
Ê ™™Ê ­Î°™ä®
Ê ™äÊ ­Î°x{®
Ê£ÓxÊ ­{°™Ó®
Ê£ÓxÊ ­{°™Ó®
Ê£ÇäÊ ­È°È™®
E
Ê£nxÊ ­Ç°Ón®
ÊÓÎxÊ ­™°Óx®
ÊÓnäÊ ­££°äÓ®
ÊÎnäÊ ­£{°™È®
ÊÎnäÊ ­£{°™È®
Ê{näÊ ­£n°™ä®
ÓÇ
ACCESSORIES (QWIKCHANGE™)
Ê
*/-
Standard Faceplates
C
>V…ˆ˜>LiÊ>Vi«>ÌiÃÊ«ÀœÛˆ`iÊ
QwikChangeTM dedicated fixturing
for those awkward parts that are
too difficult to clamp. A mini pallet
changer can be created by utilizing
ÌܜÊ>Vi«>Ìið
A
B
High Faceplates
C
A
B
Wide Faceplates
C
A
B
Machinable accessories are the optimal
܏Ṏœ˜ÊvœÀÊÀi«i>ÌÊÃi̇իðÊÊ/…iÊÃÌ>˜`>À`Ê
height and width is suitable for most
applications. CHICK has designed wide,
high and oversized accessories to provide
a cost effective solution for those unique
applications.
Oversized Faceplates
C
A
B
œÀʓ>V…ˆ˜>LiÊ>Ài>Ê`iÌ>ˆ]ÊۈÈÌʜÕÀÊÜiLÈÌiÊ
www.ChickWorkholding.com.
Ón
System Sizes
0520 and 0525
1030 and 1040
1540 and 1550
080-2621
080-2625
5FP
1030-10-40
5FP
1040-10-40
5FP
1540-15-50
5FP
1550-15-50
Dimensions
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
A
Ê {™Ê ­£°™£®
Ê {™Ê ­£°™£®
Ê ™™Ê ­Î°™ä®
Ê ™™Ê ­Î°™ä®
Ê£{nÊ ­x°nή
Ê£{nÊ ­x°nή
Ê£™nÊ ­Ç°nä®
ÊÓ{nÊ ­™°ÇÈ®
ÊәnÊ ­££°Çή
ÊΙnÊ ­£x°ÈÇ®
ÊΙnÊ ­£x°ÈÇ®
Ê{™nÊ ­£™°È£®
C
Ê ÓxÊ ­ä°™n®
Ê ÓxÊ ­ä°™n®
Ê {äÊ ­£°xÇ®
Ê {äÊ ­£°xÇ®
Ê xäÊ ­£°™Ç®
Ê xäÊ ­£°™Ç®
Order No.
5FP
1030-10-55
5FP
1040-10-55
5FP
1540-15-70
5FP
1550-15-70
Dimensions
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
Ê ™™Ê ­Î°™ä®
Ê ™™Ê ­Î°™ä®
Ê£{nÊ ­x°nή
Ê£{nÊ ­x°nή
ÊәnÊ ­££°Çή
ÊΙnÊ ­£x°ÈÇ®
ÊΙnÊ ­£x°ÈÇ®
Ê{™nÊ ­£™°È£®
Ê xxÊ ­Ó°£Ç®
Ê xxÊ ­Ó°£Ç®
Ê ÇäÊ ­Ó°ÇÈ®
Ê ÇäÊ ­Ó°ÇÈ®
Order No.
5FP
1030-15-40
5FP
1040-15-40
5FP
1540-20-50
5FP
1550-20-50
Dimensions
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
Ê£{nÊ ­x°nή
Ê£{nÊ ­x°nή
Ê£™nÊ ­Ç°nä®
Ê£™nÊ ­Ç°nä®
ÊәnÊ ­££°Çή
ÊΙnÊ ­£x°ÈÇ®
ÊΙnÊ ­£x°ÈÇ®
Ê{™nÊ ­£™°È£®
Ê {äÊ ­£°xÇ®
Ê {äÊ ­£°xÇ®
Ê xäÊ ­£°™Ç®
Ê xäÊ ­£°™Ç®
Order No.
A
C
A
C
NOT
6
IN
/-Ê-<
NOT
6
IN
/-Ê-<
080-2622
080-2626
5FP
1030-15-55
5FP
1040-15-55
5FP
1540-20-70
5FP
1550-20-70
Dimensions
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
ʓ“Ê ­ˆ˜V…®
A
Ê näÊ ­Î°£x®
Ê näÊ ­Î°£x®
Ê£{nÊ ­x°nή
Ê£{nÊ ­x°nή
Ê£™nÊ ­Ç°nä®
Ê£™nÊ ­Ç°nä®
Ê£™nÊ ­Ç°nä®
ÊÓ{nÊ ­™°ÇÈ®
ÊәnÊ ­££°Çή
ÊΙnÊ ­£x°ÈÇ®
ÊΙnÊ ­£x°ÈÇ®
Ê{™nÊ ­£™°È£®
C
Ê ÎxÊ ­£°În®
Ê ÎxÊ ­£°În®
Ê xxÊ ­Ó°£Ç®
Ê xxÊ ­Ó°£Ç®
Ê ÇäÊ ­Ó°ÇÈ®
Ê ÇäÊ ­Ó°ÇÈ®
Order No.
ә
ACCESSORIES (QWIKCHANGE™)
7Ê
,,,Ê-/>ÜÊ
>ÀÀˆiÀÃÊLÀœ>`i˜ÊޜÕÀʓœ`iÀ˜Ê
workholding flexibility by offering
ۈÃi‡ˆŽiÊwÝÌÕÀˆ˜}°ÊÊ-ˆ“«ÞÊ+܈Ž
…>˜}iTM
the jaws and your modern workholding
ˆÃÊÀi>`ÞÊvœÀÊۈÃi‡ˆŽiÊÃi̇իð
Single Station Set
>ÜÊ
>ÀÀˆiÀÃ
B
C
D
A
Size
E
*Holding Capacity
Ê ­>Ý]ʈ˜ÊrÊä®
Set includes:
­£®Êœ˜}ʜÛi>LiÊ>ÜÊ
>ÀÀˆiÀ
­£®ÊˆÝi`Ê-ˆ˜}iÊ-Ì>̈œ˜Ê>ÜÊ
>ÀÀˆiÀ
­£®Ê-ˆ˜}iÊ-Ì>̈œ˜ÊÝÌi˜`i`Ê/À>ÛiÊ
œÛiÀ«>Ìi
* >À`Ê>ÜÃʘœÌʈ˜VÕ`i`°
Single Station Deluxe Set
>ÜÊ
>ÀÀˆiÀÃ
B
C
D
E
A
Size
F
G
*Short Holding Capacity
Set includes:
­£®Ê-…œÀÌʜÛi>LiÊ>ÜÊ
>ÀÀˆiÀ
­£®Êœ˜}ʜÛi>LiÊ>ÜÊ
>ÀÀˆiÀ
­£®ÊˆÝi`Ê-ˆ˜}iÊ-Ì>̈œ˜Ê>ÜÊ
>ÀÀˆiÀ
­£®Ê-ˆ˜}iÊ-Ì>̈œ˜ÊÝÌi˜`i`Ê/À>ÛiÊ
œÛiÀ«>Ìi
* >À`Ê>ÜÃʘœÌʈ˜VÕ`i`°
>ÜÊ
>ÀÀˆiÀÃÊ>ÀiÊ̅iʜ«Ìˆ“>Ê܏Ṏœ˜ÊvœÀÊ
œ˜i‡Ìˆ“iÊÃi̇իÃʜÀÊÓ>ÊL>ÌV…ÊÈâiðÊÊ
>ÜÊ
>ÀÀˆiÀÃÊ>ÀiÊ>Û>ˆ>Liʈ˜Êˆ˜V…Ê>˜`Ê
metric as Single Station, Single Station
Deluxe and Dual Station Sets for CHICK’s
£ä{äÊ>˜`Ê£xxäÊܜÀŽ…œ`ˆ˜}ÊÃÞÃÌi“ð
Ê ­ˆ˜]Ê>Ý®
H
*Long Holding Capacity
Ê ­>Ý]ʈ˜ÊrÊä®
Dual Station Set
>ÜÊ
>ÀÀˆiÀÃ
C
B
B
A
Dual Station Size
E
E
*Dual Station Holding Capacity
Ê ­>Ý]ʈ˜ÊrÊä®
Set includes:
­Ó®ÊœÛi>LiÊ>ÜÊ
>ÀÀˆiÀÃ
­£®ÊˆÝi`Ê
i˜ÌiÀÊ>ÜÊ
>ÀÀˆiÀ
­£®ÊÕ>Ê-Ì>̈œ˜ÊÝÌi˜`i`Ê/À>ÛiÊ
œÛiÀ«>Ìi
* >À`Ê>ÜÃʘœÌʈ˜VÕ`i`°
*The Holding Capacity dimensions are calculated using
Ê ½ÃÊÃÌ>˜`>À`Ê>À`Ê>ÜðÊÊ-iiÊHard Jaws dimensional
information to make adjustments.
Îä
D
iÌÀˆVÊ>ÜÊ
>ÀÀˆiÀÊ-iÌÃÊ>ÀiÊ>ÃœÊ>Û>ˆ>Li]Ê
for details contact CHICK.
System Sizes
Order No.
1040 and 1550
5JC
1040-SS-IN
5JC
1550-SS-IN
Dimensions
ʓ“Ê
­ˆ˜V…®
““Ê
­ˆ˜V…®
A
ä™nÊÊ
­Î°nÈ®
£{nÊÊ
­x°nή
Ó£ÇÊÊ
­n°x{®
ÓnÇÊÊ ­££°Îä®
C
££ÈÊÊ
­{°xÇ®
£ÎxÊÊ
­x°Î£®
D
äÓnÊÊ
­£°£ä®
äÎnÊÊ
­£°xä®
Holding Capacity
E
Order No.
Dimensions
ʓ“Ê Ê Ê­ˆ˜V…®
ʓ“Ê Ê Ê­ˆ˜V…®
£äÓÊ Ê ­{°ää®
££äÊÊ
5JC
1040-XS-IN
­{°Îή
5JC
1550-XS-IN
1550-XS
ʓ“Ê Ê Ê­ˆ˜V…®
ʓ“Ê Ê Ê­ˆ˜V…®
A
ä™nÊÊ
­Î°nÈ®
£{nÊÊ
­x°nή
£ÈÈÊÊ
­È°x{®
£™äÊÊ
­Ç°{n®
C
Ó£ÇÊÊ
­n°x{®
ÓnÇÊÊ ­££°Îä®
D
££ÈÊÊ
­{°xÇ®
£ÎxÊÊ
­x°Î£®
E
äÓnÊÊ
­£°£ä®
äÎnÊÊ
­£°xä®
Holding Capacity
ʓ“Ê Ê Ê­ˆ˜V…®
ʓ“Ê Ê Ê­ˆ˜V…®
äx£Ê Ê ­Ó°ää®
ä™ÇÊÊ
­Î°nÓ®
G
£xÓÊÊ
­È°ää®
ÓänÊÊ
­n°£™®
H
£äÓÊÊ
­{°ää®
££äÊÊ
­{°Îή
Hard Jaws
These steel hard jaws
are perfect for one part
>««ˆV>̈œ˜Ã°ÊʜÌÊ̅i“Êœ˜ÌœÊ
CHICK’s jaw carriers and the
system is ready to go.
1040 Workholding Systems
Order No. JH4STD
Dimensions
iˆ}…ÌÊ
/…ˆVŽ˜iÃÃÊ
7ˆ`̅Ê
mm
ΣÊ
™Ê
£ä£Ê
(inch)
­£°ÓÓ®
­ä°Îx®
­Î°™™®
1550 Workholding Systems
Order No. JH6STD
Dimensions
iˆ}…ÌÊ
/…ˆVŽ˜iÃÃÊ
7ˆ`̅Ê
mm
{{Ê
£ÓÊ
£xÓÊ
(inch)
­£°ÇÓ®
­ä°{n®
­x°™™®
Height
Width
Thick
Order No.
Dimensions
5JC
1040-DS-IN
5JC
1550-DS-IN
1550-DS
ʓ“Ê Ê Ê­ˆ˜V…®
ʓ“Ê Ê Ê­ˆ˜V…®
A
ä™nÊÊ
­Î°nÈ®
£{nÊÊ
­x°nή
££ÈÊÊ
­{°xÇ®
£x£ÊÊ
­x°™{®
C
äxäÊÊ
­£°™Ç®
ä{ÈÊÊ
­£°nä®
D
äÓnÊÊ
­£°£ä®
äÎnÊÊ
­£°xä®
Holding Capacity
E
ʓ“Ê Ê Ê­ˆ˜V…®
ʓ“Ê Ê Ê­ˆ˜V…®
xÓÊÊ Ê ­Ó°äή
äx{ÊÊ
­Ó°£Î®
31
ACCESSORIES (CONVERSION FACEPLATES AND GRIPPERS)
" 6,-" -Ê
*/-
" 6,-" Ê
*/-
Maximize your flexibility with the
œ˜ÛiÀȜ˜Ê>Vi«>ÌiðÊÊ
œ˜ÛiÀȜ˜Ê
>Vi«>ÌiÃÊ>Àiʈ`i>ÊvœÀÊ̅œÃiÊ
manufacturer’s required to machine
a variety of part sizes. Conversion
>Vi«>ÌiÃÊV>˜Êi>ȏÞÊVœ˜ÛiÀÌÊ>ÊÃÞÃÌi“Ê
̅>ÌÊV>˜Ê…œ`ʜ˜iÊ£ä»Ê«>ÀÌʜÀÊVœ˜ÛiÀÌÊ̜Ê
£äÊÓ>ÊÃÞÃÌi“ÃÊ̅>Ìʅœ`ÊÓäÊ{»Ê«>ÀÌð
6iÀ̈V>Ê
œ˜ÛiÀȜ˜Ê>Vi«>ÌiÃ
Height
Holding Capacity
Width
Length
œÀˆâœ˜Ì>Ê
œ˜ÛiÀȜ˜Ê>Vi«>ÌiÃ
Height
Width
Length
Dimensions include standard dual station
äxÓäÊ+܈Ž
…>˜}iʓ>V…ˆ˜>Liʍ>Üð
GRIPPERS
CHICK Grippers are ideal for heavy
machining applications in which fixture
wear is a major concern. The hardened
steel surface provides a clamping
interface that eliminates wearing caused
by rough cast irons, tool steels, or other
hard metals. The CHICK Grippers also
increase the holding power of your
wÝÌÕÀi]ÊȘViÊ̅iÊÃiÀÀ>Ìi`ÊÃÕÀv>ViʺLˆÌiûÊ
into the part, for more aggressive
workpiece clamping.
ÎÓ
GRIPPERS
Width
Length
Thickness
Vertical Conversion Faceplates
Horizontal Conversion Faceplates
Ideal for HMC’s and other indexable fixtures
Ideal for High Density fixtures
-9-/Ê-<1030
"/Ê**
6 Systems Order No.
Length
5CF1030-20-06H
Ê ““Ê
­ˆ˜V…®
Ê Ó™nÊ
­££°Çή
Width
Ê £™nÊ
­Ç°nä®
Height
Ê
n£Ê
­Î°£™®
Holding Cap
Ê
nxÊ
­Î°Îx®
ÓÊ-ÞÃÌi“ÃÊ"À`iÀÊ œ°
1040
Length
5CF1040-20-02V
nÊ-ÞÃÌi“ÃÊ"À`iÀÊ œ°
5CF1040-20-08H
Ê ““Ê
­ˆ˜V…®
Ê ““Ê
­ˆ˜V…®
Ê {£™Ê
­£È°xä®
Ê Î™nÊ
­£x°ÈÇ®
Width
Ê
™™Ê
­Î°™ä®
Ê £™nÊ
­Ç°nä®
Height
Ê
n£Ê
­Î°£™®
Ê
n£Ê
­Î°£™®
Holding Cap
Ê
nxÊ
­Î°Îx®
Ê
nxÊ
­Î°Îx®
ÓÊ-ÞÃÌi“ÃÊ"À`iÀÊ œ°
1540
Length
5CF1540-20-02V
nÊ-ÞÃÌi“ÃÊ"À`iÀÊ œ°
5CF1540-20-08H
Ê ““Ê
­ˆ˜V…®
Ê ““Ê
­ˆ˜V…®
Ê {£™Ê
­£È°xä®
Ê Î™nÊ
­£x°ÈÇ®
Width
Ê £{nÊ
­x°nή
Ê £™nÊ
­Ç°nä®
Height
Ê
™nÊ
­Î°nÈ®
Ê
n£Ê
­Î°£™®
Holding Cap
Ê
nxÊ
­Î°Îx®
Ê
nxÊ
­Î°Îx®
ÓÊ-ÞÃÌi“ÃÊ"À`iÀÊ œ°
1550
Length
5CF1550-20-02V
£äÊ-ÞÃÌi“ÃÊ"À`iÀÊ œ°
5CF1550-20-10H
Ê ““Ê
­ˆ˜V…®
Ê ““Ê
­ˆ˜V…®
Ê {™nÊ
­£™°È£®
Ê {™nÊ
­£™°È£®
Width
Ê £{nÊ
­x°nή
Ê £™nÊ
­Ç°nä®
Height
Ê
™nÊ
­Î°nÈ®
Ê
n£Ê
­Î°£™®
Holding Cap
Ê
nxÊ
­Î°Îx®
Ê
nxÊ
­Î°Îx®
GRIPPERS
Gripper #4
Gripper #5
Gripper #6
™““ÊÝʙ““ÊÝÊΓ“
£Ó““ÊÝʣӓ“ÊÝÊ{°È““
15mm x 15mm x 5mm
£™““ÊÝÊ£™““ÊÝÊȓ“
Chick Gripper Plain
ääx‡ÓxΣ
ääx‡Óx{£
ääx‡Óxx£
ääx‡ÓxÈ£
Chick Gripper Serrated
ääx‡ÓxÎÓ
ääx‡Óx{Ó
ääx‡ÓxxÓ
ääx‡ÓxÈÓ
DimensionsÊ­i˜}̅ÊÝÊ7ˆ`̅ÊÝÊ/…ˆVŽ˜iÃî
Gripper #3
33
ACCESSORIES
+7‡"-Ê
MOUNTING
+܈Ž‡œŽÃÊV>˜Ê“œÕ˜ÌÊiˆÌ…iÀÊ̜Ê
½ÃÊ
œÕ˜`>̈œ˜ÊœÀÊ̜ÊޜÕÀÊ/‡-œÌÌi`ÊÌ>Li°
"1 /"
A
Complete fixturing change over
in minutes. Take advantage of
CHICK’s Round and Diamond Pin
Set for location and then bolt the
system in place.
Round and Diamond Pin Set
* £Ó-
A
Toe Clamps
ääx‡äÓx{
B1
Round and Diamond Pin Sets
>ÀiÊÕÃi`Ê̜ʏœV>ÌiÊ+܈Ž‡œŽÃÊ
-ÞÃÌi“ÃÊ­«}ðʙ‡£ä®ÊµÕˆVŽÞÊ
>˜`Ê>VVÕÀ>ÌiÞ°ÊÊIx䓓Ê
systems require an adapter
­›Êän£‡ä™ää®°
CHICK Toe Clamps (four per
Ãi̮ʫÀœÛˆ`iÊ̅iʵՈVŽiÃÌÊ
and most secure means of
“œÕ˜Ìˆ˜}Ê>Ê+܈Ž‡œŽÊ̜Ê>Ê/‡
-œÌÌi`Ê6
ÊÌ>Li°ÊÊ/œiÊV>“«ÃÊ
are designed to be used with
iˆÌ…iÀÊ£ÉӇ£ÎʜÀÊ£ÓÊÜVŽiÌÊ
head cap screws.
/‡-"//Ê/
B
Select the appropriate Locating
Keys and a set of Toe Clamps to
“œÕ˜ÌÊ̜Ê̅iʓ>V…ˆ˜i½ÃÊ/‡-œÌÌi`Ê
table.
-/Ê-1*/-
C
/…iÊx䓓Ê+܈Ž‡œŽÃʅ>ÛiÊ>˜Ê
additional mounting option—
The Nested Subplate—which gives
̅iÊ>LˆˆÌÞÊ̜ʓœÕ˜ÌÊwÛiÊx䓓Ê
+܈Ž‡œŽÃÊÈ`iÊLÞÊÈ`i°
A
B1
Î{
Locating Keys
"À`iÀʛ½ÃÊiœÜ
Nested Subplates
B2
C
Locating Keys (two keys
«iÀÊÃiÌ®Ê>ÀiÊÕÃi`Ê̜ʫÀœÛˆ`iÊ
positive location when
“œÕ˜Ìˆ˜}Ê+܈Ž‡œŽÃÊ̜Ê/‡
-œÌÌi`Ê6
ÊÌ>LiðÊ/…iÃiÊ
keys utilize a ball lock
mechanism to fasten on to
̅iÊ՘`iÀÈ`iʜvÊ>Ê+܈Ž‡œŽÊ
bases.
Order No.
Width
£äÊ
£ä““
£ÓÊ
£{ÊÝÊ£nÊ
£Ó““
£{ÊEÊ£n““
MKE16
16mm
ÓäÊ
Ó䓓
xääÊ
°xää»
xÈÓÊ
°xÈÓ»
ÈÓxÊ
°ÈÓx»
ÈnnÊ
°Ènn»
ÇxäÊ
°Çxä»
n£ÓÊ
°n£Ó»Ê
WIDTH
QwikChangeTMÊwÛiÊx䓓Ê+܈Ž‡œŽÃʈ˜Ê
“ˆ˜ÕÌiðÊÊ-ˆ“«ÞÊLœÌÊ̅iÊ+܈Ž‡œŽÃÊ̜Ê̅iÊ
Subplate and mount the Subplate to either
>Ê
ʜ՘`>̈œ˜ÊœÀÊ>Ê/‡-œÌÌi`ÊÌ>Li°
System Sizes
Order No.
Dimensions
0520 and 0525
083-2305
083-2505
““Ê
­ˆ˜V…®
““Ê
­ˆ˜V…®
Length
ÓxäÊÊ
­™°n{®
ÓxäÊÊ
­™°n{®
Depth
ÓääÊÊ
­Ç°nÇ®
ÓxäÊÊ
­™°n{®
Height
äÎxÊÊ
­£°În®
äÎxÊÊ
­£°În®
Length
Depth
Height
B2
35
xääÊiÞÃ̜˜iÊÀˆÛi
7>ÀÀi˜`>i]Ê*Ê£xänÈ
*…œ˜i\ÊÇÓ{‡ÇÇӇ£È{{
£‡nää‡ÎÎӇ{{Óx
>Ý\ÊÇÓ{‡ÇÇӇ£ÈÎÎ
www.ChickWorkholding.com
-9-Êx‡ää¶Ê­¶¶®Ê£ÉänÊ