THERMO

THERMO
Ureðaji za THERMO izmjenu alata
THERMO Shrinking equipment
air cooling unit
THERMO
back stop presetting to determine the
depth before shrinking
operating instructions
Storage space
for cooling
stop rings
inductor rotates 180o to allow easy
removal of broken tools
storage space for
chuck holders
Start.2
Fi-5
remotely controlled
compatible with Start.2 & Fi-5
removable electronic
compatible with Start.2 & Fi-5
simplified after-sales service
registered models - registered patents
subject to modifications of the design in the technical interest progress
5.01
cooling system compatible
with any type of geometries
to optimize cooling time
cycle.
shrinking system
for reductions
ADAPTED
TO
YOUR
NEED
•
Shrinking and unshrinking of any type of tools :
steel,HSS, carbide, tool-inserts, hard metals, denal,
shrink fit extensions and reductions, tool shank h6.
•
Shrinking f
2 to f
40 with the same inductor.
upper f
on request.
•
Self regulated power thanks to a microprocessor.
•
Shrinking time cycle from 2 to 7 seconds.
THERMO
SHRINKING
.
•
Cooling time cycle from 1,5 to 3 minutes.
(depending on the geometry)
•
Air cooling unit compatible with any type of external
geometries. (3° angle, 4,5° angle or cylindrical)
•
Specially designed ergonimics with remote control.
•
Removable electronic to allow easy, quick and
economical after sales service.
storage space for induction and
cooling stop rings
back stop presetting to determine
the tool gauge before shrinking
(other presetting systems on request)
5.02
Ureðaji za THERMO izmjenu alata
THERMO Shrinking equipment
START.2 Induktivni ureðaj za brzu izmjenu alata
Jednostavan za upotrebu.
Promjer drški od f6 do f20 (ostali f kao opcija).
Montaža ureðaja na radni stol ili na kolica.
Beskontaktno hlaðenje upotrebom ureðaja FG500.1150.
Moguæa upotreba više ureðaja za hlaðenje.
Dimenzije :255*490*755 mm
Težina ureðaja : 19 kg
START.2 Shrink fit unit
Easy to use
Provided with accesories for shrinking f6 to f20 (other f optional).
Unit to be placed on a workbench or fixed trolley.
Cooling without contact using cooling unit FG500.1150.
Possibility to use several cooling units.
Dimensions :255*490*755 mm.
Weight : 19 kg.
FG500.1150 ureðaj za hlaðenje zrakom
Promjer drški od f6 do f20 (ostali f kao opcija).
Radni tlak zraka 4-6 bara
Filter i regulatorom tlaka zraka sa manomentrom.
Montaža ureðaja na radni stol ili na kolica.
Može se koristiti i kao dodatak uz ureðaje Fi-5A i Fi-5B.
Dimenzije : 220*190*615 mm
Težina ureðaja : 5 kg
FG500.1150 air cooling unit
THERMO
with accesories for cooling f6 to f20 (other f opt.)
Working pressure : 4-6 bars.
Equipped with a filter and a pressure-reducing gauge.
Unit to be placed on a workbench or fixed trolley.
Can be used as a supplement with the Fi-5A / Fi-5B units.
Dimensions : 220*190*615 mm
Weight : 5 kg
FJ150.0100
Za prednamještanje dužine.
Samo za Fi-5 ureðaj.
Toènost : +- 0,050 mm.
Ponovljivost : +-0,020 mm.
Promjer drški od f6 do f32
FJ150.0100
Length presetting unit.
For Fi-5 shrink fit unit only.
Accuracy : +- 0,050 mm.
Repeatability : +-0,020 mm.
Capability : f6 to f32
Fi-5 Induktivni ureðaj za brzu izmjenu alata
Sa integriranim ureðajem za hlaðenje :
Fi-5A : 1 jedinica za hlaðenje.
Fi-5B : 2 jedinice za hlaðenje.
Hlaðena elektronika ureðaja omoguæuje konstantnu upotrebu.
Promjer drški od f2-f32, za zagrijavanje i hlaðenje (ostali f opcija).
Rukovanje bez dodirivanja držaèa tijekom cikusa grijanja i hlaðenja.
Montaža ureðaja na radni stol.
Dimenzije :785*490*855 mm
Težina ureðaja : 37 kg
Fi-5 Shrink fit unit
With integrated colling :
Fi-5A : 1 cooling unit.
Fi-5B : 2 cooling units.
The electronic board is cooled to allow high-speed shrinking.
Provided with accesories for shrinking and cooling from
f2 to f32 (other f optional).
Handling without touching the tool-holders between shrinking and
cooling time cycle.
To be placed an a workbench.
Dimensions :785*490*855 mm
Weight : 37 kg
5.03
Tehnièki podaci i oprema
Specifications & equipment
TEHNIÈKI PODACI/ SPECIFICATIONS
START.2
Fi-5A
Fi-5B
START.2J
Fi-5JA
Fi-5JB
.
Samostalno regulirana snaga zahvaljujuãi mikroprocesoru :
Detekcija promjera, automatsko odreðivanje snage i dužine ciklusa zagrijavanja
.
Self regulated power thanks to a microprocessor :
Detection of the diameter, automatic configuration of the heating power and heating cut-off.
.
Zagrijavanje usmjereno na držaè alata. Ne ošteãuje se alat niti držaè alata.
.
Heating located on the tool holder, no deterioration of the tool and the tool holder.
.
Automatski odreðen ciklus zagrijavanja, ovisno o oèitanim parametrima.
.
Self-regulated heating depending in parameters detected.
.
Izmjena alata f
2 do f
40 mm pomoæu istog induktora.
.
2 to f
40 mm with the same inductor.
Shrinking and unshrinking f
.
Automatsko ili manualno odreðivanje vremena ciklusa zagrijavanja.
.
Automatic or manual shrinking cycle time
.
Ulazni promjer induktora : 64 mm
.
Inductor entry diameter : 64 mm
.
Ergonomièan dizajn sa daljinskim upravljanjem.
.
Designed ergonomics with remote control.
.
Napredni usmjerivaèi magnetnih polja omoguæuju izmjenu alata koji sadrže èip za kodiranje.
.
Advanced concentrators of magnetic fields allow shrinking of tools provided with a coding chip.
.
Rotacija induktora za 180o bez rastavljanja.
.
Inductor rotates 180o without disassembling.
.
Sustav hlaðenja elektronièke ploèe omoguæuje konstantan rad ureðaja.
.
THERMO
Cooling system for the electronic board to allow high-speed shrinking.
.
.
.
Napajanje/ Power supply
3x380/480V - 16A
50/60 Hz - 14 kW
3x200/240V - 32A
50/60 Hz - 14 kW
.
.
.
Napajanje/ Power supply
.
Dobava komprimiranog zraka : 4 - 6 bara
.
Compressed air supply : 4 - 6 bars
.
.
OPREMA/ EQUIPMENT :
.
1 jedinica za hlaðenje zrakom
.
1 cooling unit
.
2 jedinice za hlaðenje zrakom
.
2 cooling units
.
Izmjena alata kod kojih je promjer oštrice veæi od promjera drške.
.
Shrinking of cutting diameters higher than shank diameters.
.
Sustav izmjene za redukcije.
.
Shrinking system for reductions.
.
Spremište za nosaèe držaèa alata
.
Storage space for chuck holders.
.
Spremište za induktorske stop-prstenove i za stop-prestenove za hlaðenje.
.
Storage space for inductor stop rings and cooling stop rings.
.
Spremište za stop-prstenove za hlaðenje.
.
Storage space for cooling stop rings.
.
Kolica
.
Fixed trolley
.
Radni stol
.
Workbench
5.04