Pacific HF Acid Valves

Comments

Transcription

Pacific HF Acid Valves
Pacific HF Acid Valves
PACIFIC VALVES
HF ACID
API 602 and API 600
By Subject
UOP and Phillips Valve Index..................................................................................4
Product/Market Overview........................................................................................5
API 602 Compact Gate Valve Features...................................................................6
API 600 Bolted Bonnet Gate Valve Features...........................................................7
High Integrity Shutoff Gate Valves...........................................................................8
API 602 Compact Globe Valve Features.................................................................9
API 600 Bolted Bonnet Globe Valve Features....................................................... 10
API 602 and API 600 Check Valve Features.......................................................... 11
Grease Injectors.................................................................................................... 12
Service Recommendations................................................................................... 13
UOP Valve Product Line...................................................................................14-37
Phillips Valve Product Line................................................................................38-50
Figure Number System..........................................................................................51
3
HF Acid Valves
UOP and Phillips Valve Index
UOP Index
Gate Valves
Class 800...................................Fig. No. 3656-HF8 ........................................ 14
Class 800...................................Fig. No. 3656-HF8 (-M35-1)........................... 15
Class 300...................................Fig. No. 357GR-HF8 (-M35-1)....................... 16
Class 600...................................Fig. No. 3654GR-HF8 (-M35-1)..................... 17
Class 800...................................Fig. No. 3656G-HF8T.................................... 18
Class 150...................................Fig. No. 150-HF8........................................... 19
Class 300...................................Fig. No. 350-HF8........................................... 20
Class 300...................................Fig. No. 350GR-HF8T.................................... 21
Class 300...................................Fig. No. 350GR-HF8-BTT.............................. 22
Class 300...................................Fig. No. 350L(2)-HF8-BTT............................. 22
Globe Valves
Class 300...................................Fig. No. 3367G-HF8T.................................... 23
Class 600...................................Fig. No. 665-HF8 (-M35-1)............................. 24
Class 600...................................Fig. No. 3667-HF8 (-M35-1)........................... 25
Class 800...................................Fig. No. 667-HF8............................................ 26
Class 800...................................Fig. No. 3669-HF8......................................... 27
Class 800...................................Fig. No. 3669G-HF8T.................................... 28
Class 150...................................Fig. No. 160-HF8........................................... 29
Class 300...................................Fig. No. 360-HF8........................................... 30
Class 300...................................Fig. No. 360GR-HF8T.................................... 31
Class 300...................................Fig. No. 366-HF8 (-M35-1)............................. 32
Check Valves
Class 800...................................Fig. No. 3682-HF8......................................... 33
Class 600...................................Fig. No. 3680-HF8 (-M35-1)........................... 34
Class 150...................................Fig. No. 180-HF8........................................... 35
Class 300...................................Fig. No. 380-HF8........................................... 36
Class 300...................................Fig. No. 380R-HF8......................................... 37
Phillips Index
Gate Valves
Class 300...................................Fig. No. 3354P-HF8 (-M35-1)........................ 38
Class 600 .................................Fig. No. 3654P-HF8 (-M35-1)........................ 39
Class 800...................................Fig. No. 3655P-HF8 (-M35-1)........................ 40
Class 800...................................Fig. No. 3655P-HF8 ...................................... 41
Class 300...................................Fig. No. 350P-HF8 (-M35-1).......................... 42
Class 300...................................Fig. No. 350P-HF8-BTT (-M35-1).................. 43
Class 300...................................Fig. No. 350L(2)-HF8-BTT (-M35-1).............. 43
Globe Valves
Class 300...................................Fig. No. 3367P-HF8....................................... 44
Class 600...................................Fig. No. 3667P-HF8....................................... 45
Class 800...................................Fig. No. 3668P-HF8 (-M35-1)........................ 46
Class 800...................................Fig. No. 3668P-HF8T (-M35-1)...................... 47
Class 300...................................Fig. No. 360P-HF8......................................... 48
Check Valves
Class 800...................................Fig. No. 3681P-HF8 (-M35-1)........................ 49
Class 300...................................Fig. No. 380P-HF8......................................... 50
4
HF Acid Valves
Product/Market Overview
The Leading Source for HF Acid Valves
and Related Technology
Experience
Pacific Valves has been manufacturing valves for this very difficult
service for over 50 years. We are considered the pioneers of this
type of valving. In fact, we are the only valve manufacturer originally
approved by all the major hydro-fluoric acid licensors (U.O.P., Phillips
Petroleum and Chevron) in all sizes and pressure ranges.
Primary Monel® parts are color coded to assure proper material
identification. We do not stop here. Before any Monel® part is assembled into a hydrofluoric acid valve it is acid tested to assure that
it is Monel®. Another important aspect in the manufacture of these
valves is the clearances at the critical metal interfaces (wedge/body
guides, stem/back seat bushing, etc.). Hydrofluoric acid will react
with carbon steel and Monel® producing a fluoride buildup on the
metal surfaces which can render the valve in-operable. These clearances, developed over years of manufacturing experience, testing
and research, must be precisely controlled to allow for this buildup.
Our experience has enabled us to consistently produce valves that
give the best performance for this stringent service.
Certified Quality
All of our pressure tests and material checks are witnessed by an
inspector who signs off on their accuracy. A laminated card is then
attached to the valve with each test and material check indicated,
as certification to our customer that these procedures have been
followed. Every valve comes with this certification attached to it.
Every Valve is Tested
We test 100% of our hydrofluoric acid valves with kerosene. Our
experience indicates that kerosene is the most ideal test media for
the following reasons:
• It prevents water entrapment; water entrapped in the valve internals will accelerate corrosion.
• It assures casting quality; kerosene is less viscous than
water, thus will locate a casting defect more readily than
other test fluids.
• It provides seat test reliability; again, the viscosity of
kerosene provides a more reliable seat leakage indication.
We test our hydrofluoric acid valves at extended time periods to
further assure the quality of the valve performance. In addition, we
test our HF Acid valves with Helium at 300 PSI to insure the casting integrity.
Large In-house Inventory
Recognizing the need to continue our service beyond initial installation,
we have committed to the refiners and licensors that an inventory
of hydrofluoric acid valves will be maintained at Pacific Valves. We
routinely carry valves in inventory that meet the licensor’s specification
for quick delivery to your plant.
When you purchase Pacific hydrofluoric acid valves, you are really getting:
• Reliability • Quality • Peace of Mind
knowing that you have bought the most reliable product for this
very difficult service.
Monel® is a registered trademark of Special Metals Corporation.
5
HF Acid Gate Valves
API 602 Compact Gate Features
Rising Stem – easily visible
open-close indication.
Handwheel – large handwheels
for easy operation.
Grease Fittings – yoke sleeves
equipped with grease fittings to minimize
wear and operating torque.
Yoke Sleeves – furnished in 416
stainless steel or aluminum-bronze.
Swing Bolts – facilitate easier
maintenance and packing replacement.
Gland – two-piece gland/gland
flange is self-aligning to eliminate
stem damage from cocked gland.
Stuffing Box – optional lantern
rings and grease injectors are available.
Stem – precision machined stem has a
backseat design.
Bonnet Joint – encapsulated
gasket design.
Body – full ported, heavy duty body
with API 602 wall thickness for
maximum service life.
Wedge – fully guided wedge precision
fitted to body seats for maximum shutoff.
Seat Rings – separate heavy duty,
full ported rings for easy maintenance.
End Connections – choice of flanged,
threaded or socket weld ends.
OPTIONS
GREASE INJECTOR AND
LANTERN RING
SOFT SEATED “T” TRIM SEAT RING
All gate valves are available with optional PTFE seat rings. The molded
PTFE ring is bonded into a seat ring groove in the face for maximum
service life. This design is excellent for lower temperature service where
tight shutoff is required.
END
CONNECTIONS
END
CONNECTIONS
END
CONNECTIONS
END
CONNECTIONS
END
CONNECTIONS
Socket
Weld
Flanged
Threaded
Socket
Weld
Flanged
Threaded
Socket
Weld
Threaded
Socket
Weld
Flanged
Threaded
Socket
Weld Flanged
Flanged
Threaded
6
HF Acid Gate Valves
API 600 Bolted Bonnet Gate Features
Rising Stem – easily visible
open-close indication.
Handwheel – large handwheels
for easy operation. Also available
with gearing, motor actuators
or cylinder actuators for more
difficult services.
Grease Fittings – yoke sleeves
equippedwithfittings to minimize
wear and operating torque.
Yoke Sleeves – furnished in ductile
Ni-resist or aluminum-bronze to
reduce operating torque.
Swing Bolts – facilitate easier
maintenance and packing replacement.
Gland – two-piece gland/gland
flange is self-aligning to eliminate
stem damage from cocked gland.
Stuffing Box – optional lantern
rings and grease injectors are
available.
Stem – all Pacific wedge gate valves
are provided with upset forged T-head
stems. By forging the T-head, the
stem at the stem-wedge connection
is stregthened. This design also
allows the wedge to self-align,
eliminating the possibility of a bent
stem jamming the wedge.
Backseat – machined bonnet stem
bushing provides back-up stem seal.
Bonnet Joint – joint design
varies with ASME class rating.
Body – full ported, heavy duty body
with API 600 wall thickness for maximum
service life. Provided with bosses
for optional by-passes or drains.
Wedge – heavy pattern, fully guided
wedge precision fitted to body seats
for maximum shutoff. Available in
H.I.S. design.
Seat Rings – separate heavy duty,
full ported rings for easy maintenance.
End Connections – flanged end options
are raised face smooth finish or ring
type joint.
OPTIONS
GREASE INJECTOR AND
LANTERN RING
HIGH INTEGRITY
SHUTOFF WEDGE
SOFT SEATED “T” TRIM
SEAT RING
This fire safe design provides a zero
leakage barrier on both upstream and
downstream. Detail description is found
on page 8.
All gate valves are available with optional
PTFE seat rings. The molded PTFE ring
is bonded into a seat ring groove in the
face for maximum service life.This design
is excellent for lower temperature service
where tight shutoff is required.
MONEL® SLEEVED
STUFFING BOX
7
HF Acid Valves
API 600 High Integrity Shutoff Gate Valve
For services that require bubble tight shutoff specify Pacific’s High Integrity Shutoff gate valves. These fire-safe valves provide
a bubble tight barrier on both upstream and down stream seats and eliminate possible product contamination or loss of fluids
due to valve leakage.
The HIS construction retains the proven reliability and low maintenance of Pacific’s standard API-600 gate valve. A resilient
seal is locked into the wedge by a retainer plate. Special seat rings are installed to provide a wide seating surface for both the
elastomer and metal wedge seating surfaces. A full range of trim and shell materials, end connections, piping and actuator
options are available for corrosive services and temperatures up to 450°F.
Solid Monel® Wedge
Monel® Seat Ring
PTFE Resilient
Seal Ring
K-Monel® Cap Screws
Monel® Compression
Plate
Heavy patterned,
fully guided solid
Monel® wedge is
precision fitted and
hydrostatic tested
before resilient seals
are installed.
8
Pressure-energized
resilient seals
available in PTFE
(BTT) for maximum
versatility.
Mechanically
retained, Monel® seal
plate allows fast,
easy resilient seal
replacement.
Special extra width, Monel®
seat ring allows for wear
without loss of seal.
HF Acid Globe Valves
API 602 Compact Globe Valve Features
Handwheel – large handwheels
for easy operation.
Yoke Sleeves – furnished in 416.
stainless steel or aluminum bronze to
reduce operating torque.
Stem – machined stem
has a backseat design.
Gland – two-piece gland/gland
flange is self-aligning to eliminate
stem damage from cocked gland.
Swing Bolts – facilitate easier
maintenance and packing replacement.
Stuffing Box – optional lantern
rings and grease injectors are available.
Backseat – machined bonnet
backseat provides back-up stem seal.
Bonnet Joint – encapsulated
bonnet gasket.
Body – heavy duty body with
API 602 wall thickness for maximum
service life.
Seat Ring – threaded into body for
easy maintenance.
End Connections – choice of flanged,
socket weld or threaded ends
for piping flexibility.
OPTIONS
GREASE INJECTOR AND
LANTERN RING
GREASE INJECTOR
IN SEAT
SOFT SEATED “T” TRIM
All valves are available with optional soft
seated PTFE trim. The molded PTFE ring
is bonded into a groove in the disc face
for maximum service life. This design is
excellent for lower temperature service
where tight shutoff is required.
9
HF Acid Globe Valves
API 600 Bolted Bonnet Globe Valve Features
Handwheel – large handwheels
for easy operation. Also available
with gearing, motor actuators
or cylinder actuators for more
difficult services.
Yoke Sleeves – furnished in ductile
Ni-resist or aluminum-bronze to
reduce operating torque.
Stem – precision machined stem
has forged T-Head for reliable
stem/wedge connection.
Swing Bolts – facilitate easier
maintenance and packing replacement.
Gland – two-piece gland/gland
flange is self-aligning to eliminate
stem damage from cocked gland.
Stuffing Box – optional lantern
rings and grease injectors are available.
Bonnet Joint – joint design varies
with ASME class rating.
Backseat – machined bonnet stem
bushing provides back-up stem seal.
Body – full ported, heavy duty body
with API 600 wall thickness for maximum
service life. Provided with bosses
for optional drains.
Seat Ring – heavy duty, full ported
rings threaded into body for easy
maintenance.
End Connections – choice of raised
face smooth finish or ring type joint
for piping flexibility.
OPTIONS
GREASE INJECTOR AND
LANTERN RING
10
GREASE INJECTOR
IN SEAT
SOFT SEATED “T” TRIM
All valves are available with optional soft
seated PTFE trim. The molded PTFE ring
is bonded into groove in the disc face for
maximum service life.This design is excellent
for lower temperature service where tight
shutoff is required.
HF Acid Check Valves
API 602 and 600 Check Valve Features
API 602
Bonnet Joint – encapsulated
gasket design.
Seat Ring – heavy duty, threaded.
Disc – machined seating surface is mated to seat
ring for positive shutoff.
End Connections – choice of flanged,
threaded or socket ends for piping flexibility.
Body – heavy duty body with API 602
wall thickness for maximum service life.
API 600
Pipe Plug – standard feature for Phillips
spec. valves.
Bonnet Joint – joint design varies
with ASME class rating.
Disc Stop – provides positive stop in open
position; positions disc to effectively function in
either horizontal or vertical (flow-up) pipe runs.
Hinge Pin – precision machined solid
pin for maximum strength and service life.
Hinge – designed to withstand the shock
load of quick closing to insure longer
life and continued shut-off.
Anti-Rotation Lugs – lugs allow disc to seat
freely and prevent disc spinning and wear.
Seat Ring – heavy duty, full ported
seal welded into body.
Disc – rugged disc is bolted and pinned to hinge;
machined seating surface is mated to seat ring
for positive shutoff.
End Connections – choice of raised
face smooth finish or ring type joint
for piping flexibility.
Body – full ported, heavy duty body with API 600
wall thickness for maximum service life. Provided
with bosses for optional drains.
11
HF Acid Valves
Grease Injectors
DOUBLE BALL GREASE INJECTOR
PARTS LIST CARBON STEEL
Pacific Valves' unique injector has a double ball check protection
against leakage and a positive shut-off internal valve. The injector
button head must be unscrewed one half turn to open the internal
valve before injecting grease. While unscrewing the injector button
head, a second wrench must be used to assure that the injector body
is not loosened from the main valve. After grease injection the head
is then retightened to maintain positive shut-off.
ITEM
1
2
3 4 5 6 7 8 1
2
3
4
5
6
7
8
DESCRIPTION
Ball Check
Spring
Head Housing
Needle Valve Housing
Ball Check
Ball Check
Pin MATERIAL
302 S.S.
Music Wire
ASTM A108 GR 1018
ASTM A108 GR 1018
ASTM A108 GR 1018
Monel®
Monel®
ASTM A108 GR 1018
PARTS LIST MONEL®
ITEM
1
2
3 4 5 6 7 8 DESCRIPTION
Ball Check
Spring
Head Housing
Needle Valve Housing
Ball Check
Ball Check
Pin MATERIAL
Monel®
Music Wire
Monel®
Monel®
Monel®
Monel®
Monel®
Monel®
DIMENSIONS
NPT PIPE SIZE
¼"
³∕8 "
Grease Injector and Lantern Ring in Gate or
Globe Stuffing box.
31/16"
31/16"
Grease Injector at Seat Ring and Disc of
Globe Valve.
Dual Grease Injector at Seat Ring and Wedge
of Gate Valve.
12
LENGTH
HF Acid Valves
Service Recommendations
Service Recommendations for Gate Valves
1. Gate valves are normally used for on-off service and are not
recommended for throttling service.
2. Gate valves are normally installed in horizontal pipe runs with the
stem vertical. They can also be installed in vertical or horizontal
pipe runs with the stem other than vertical, but may require special construction depending on valve size, service conditions and
materials. WHEN PURCHASING VALVES FOR OTHER THAN
NORMAL INSTALLATION, THE VALVE ORIENTATION SHOULD
BE SPECIFIED.
3. High Integrity Shutoff gate valves can be used for hot tapping or
in pipeline services where a soft pig is used if the seat ring installation lugs are removed. Please specify.
Service Recommendations for Globe Valves
1. Globe valves are normally installed with flow and pressure under
the disc. Always check with Pacific Valves before installing valves
with flow in the other direction.
Under certain service conditions or when valves are equipped
with cylinders or electric motor actuators, there may be a cost
advantage in the designing and installing the valves with flow
over the disc. If actuators are sized for these conditions, care
must be taken to assure valves are installed correctly.
2. Threaded seat rings for valves in services with high velocity
(turbulent) flow or thermal cycling should be lock welded to the
body to avoid loosening. Please specify.
3. Conventional globe valves are suitable for most throttling applications and will provide the greatest service life where pipe line
velocity in FT/SEC does not exceed 240√v. (v is a specific volume
of flowing medium, ft.3/lb.) Prolonged throttling at less than 10%
open is not recommended due to the possibility of excessive vibration, noise and damage to disc and seats. Use of smaller valves
or V-Port trim with lower flow capacity may permit the valve to be
open at a greater percentage, thus avoiding damage. Continuous
severe throttling applications may require a control valve. Service Recommendations and Limitations of Check Valves
Check valves are best suited for low to moderate velocity applications.
Correct sizing of check valves is important. Either too low a line
velocity or too high a velocity can damage valve internals and
shorten valve life.
Threaded seat rings for valves in services with high velocity (turbulent)
flow or thermal cycling should be lock welded to the body to avoid
loosening. Please specify.
Service in systems involving frequent flow reversals and pulsation
should be avoided. Check valves should be located as far away from
equipment such as pumps and compressors as possible. Suspected
problem systems should be reviewed with Pacific Valves Engineers
before selecting and purchasing check valves.
Globe pattern check valves should be used in horizontal pipe runs
with the stem straight up.
Limitations:
13
UOP HF Acid Gate Valves
Fig. No. 3656-HF8
ASME Class 800 Sizes ½- 2"
PARTS LIST
Test Pressure
Shell Test................................3000 PSIG
Seat Test.................................2200 PSIG
Helium Shell Test......................500 PSIG
54
ITEM DESCRIPTION
10
Body
11 Seat Ring
16a Eyebolt Nut 16b Bonnet Nut
30 Bonnet
31 Yoke Sleeve
35 Gland
36 Gland Flange
46 Packing
49 Eyebolt Pin
50 Handwheel
52 Eyebolt
54 Handwheel Nut
55 Bonnet Gasket
56 Jam Nut
59 Grease Fitting
70 Stem
71 Wedge
98 Bonnet Stud
50
56
31
16a
36
35
52
49
46
98
16b
30
55
70
10
MATERIAL
3656-HF8
ASTM A216 GR. WCB
or ASTM A105
Monel®
ASTM A194 GR. 2H
ASTM A194 GR. 2HM
ASTM A216 GR. WCB
or ASTM A105
12% Chrome
Monel®
Carbon Steel
Graphitic
Carbon Steel
Malleable Iron
Carbon Steel
Carbon Steel
Monel®/Graphite
Spiral Wound
Carbon Steel
Carbon Steel
K-Monel®
Monel®
ASTM A193 GR. B7M
71
11
DIMENSIONS and WEIGHTS
Dim
Description .5
A1
M
K
L
K&L
A1
1
1.5
2
4.75
5.25
mm
89
89
105
121
133
in.
10.18
10.18
11.07
15.83
15.83
Center to Top
Open
mm
259
259
282
402
402
in.
9.28
9.28
9.93
13.65
13.65
Center to Top
Closed
mm
236
236
252
347
347
in.
4.25
4.25
4.25
5.50
8
mm
108
108
108
140
203
in.
.5
.5
.5
.5
.62
X
Bore Depth
Socket Weld End
Y
Bore Diameter
Socket Weld End
Weight
14
3.5
4.13
Handwheel
Dia.
Related data
See Technical Data section for: Temperature/pressure data, Flow calculations (Cv).
3.5
.75
End to End
Socket Weld End
M
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. U.O.P. specification includes sizes ½"-2".
in.
VALVE SIZE (inches)
mm
13
13
13
13
16
in.
1.065
1.065
1.330
1.915
2.406
mm
27
27
34
49
61
lbs.
9
9
14
24
39
kg
4.1
4.1
6.4
10.9
17.7
UOP HF Acid Gate Valves
Fig. No. 3656-HF8 (-M35-1)
ASME Class 800 Sizes ½- 2"
Test Pressure
PARTS LIST
Shell Test................................3000 PSIG
Seat Test.................................2200 PSIG
Helium Shell Test......................500 PSIG
MATERIAL
ITEM DESCRIPTION
3656-HF8
10 Body
ASTM A494 GR. M35-1
11 Seat Ring
Monel®
16a Eyebolt Nut ASTM A194 GR. 2H
16b Bonnet Nut
ASTM A194 GR. 2HM
30 Bonnet
ASTM A494 GR. M35-1
31 Yoke Sleeve
12% Chrome
35 Gland
Monel®
36 Gland Flange
Carbon Steel
46 Packing
Graphitic
49 Eyebolt Pin
Carbon Steel
50 Handwheel
Malleable Iron
52 Eyebolt
Carbon Steel
54 Handwheel Nut
Carbon Steel
55 Bonnet Gasket
Monel®/Graphite
Spiral Wound
56 Jam Nut
Carbon Steel
59 Grease Fitting
Carbon Steel
70 Stem
K-Monel®
71 Wedge
Monel®
98 Bonnet Stud
ASTM A193 GR. B7M
54
50
56
31
16a
36
35
52
49
46
98
16b
30
55
70
10
71
11
DIMENSIONS and WEIGHTS
Dim
Description .5
A1
in.
3.0
VALVE SIZE (inches)
.75
3.5
1
1.5
2
4.13
4.75
5.25
End to End
Socket Weld End
mm
76
89
105
121
133
in.
8.68
10.18
11.07
15.83
15.83
mm
221
259
282
402
402
9.28
9.93
13.65
13.65
K
Center to Top
Open
L
Center to Top
Closed
in.
8.00
mm
203
236
252
347
347
in.
4
4.25
4.25
5.50
8
mm
102
108
108
140
203
in.
..37
.5
.5
.5
.62
M
Handwheel
Dia.
X
Bore Depth
Socket Weld End
Y
Bore Diameter
Socket Weld End
Weight
mm
10
13
13
13
16
in.
.855
1.065
1.330
1.915
2.406
mm
22
27
34
49
61
lbs.
9
9
14
24
39
kg
3.2
4.1
6.4
10.9
17.7
M
K&L
A1
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. U.O.P. specification includes sizes ½"-2".
Related data
See Technical Data section for: Temperature/pressure data, Flow calculations (Cv).
15
UOP HF Acid Gate Valves
Fig. No. 357GR-HF8 (-M35-1)
ASME Class 300 Sizes 1½ - 8"
PARTS LIST
Test Pressure
Shell Test................................ 1125 PSIG
Seat Test...................................825 PSIG
Helium Shell Test......................500 PSIG
54
50
31
20
56
30
16a
36
35
46
33
52
49
16b
30
55
32
98
70
11
71
10
150
ITEM DESCRIPTION
MATERIAL
ASTM A494 GR. M35-1
Monel® W/PTFE Insert
ASTM A194 GR. 2HM
ASTM A194 GR. 2H
Alloy Steel
ASTM A494 GR. M35-1
Aluminum Bronze
Monel®
Monel®
Monel®
Carbon Steel
Graphitic
Carbon Steel
Malleable Iron
Carbon Steel
Carbon Steel
Monel® Ring
Carbon Steel
Monel®
Monel®
ASTM A193 GR. B7M
Carbon Steel and Monel®
10 Body
11 Seat Ring
16b Bonnet Stud Nut
16a Eyebolt Stud Nut
20 Bearings
30 Bonnet
31 Yoke Sleeve
32 Bonnet Stem Bushing 33 Lantern Ring
35 Gland
36 Gland Flange
46 Packing
49 Eyebolt Pin
50 Handwheel
52 Eyebolt
54 Handwheel Nut
55 Bonnet Gasket
56 Jam Nut
70 Stem
71 Wedge
98 Bonnet Stud
150 Dbl. Ball Grease Injector A
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim
M
K&L
1.5 2
2 2 2.5 2 3 2
4
6
8
A1
Face to Face in.
Flanged Ends mm
7.5
8.5
9.5 11.13 12.0 15.88 16.5
191
216
241
A2
Face to Face in.
RTJ
mm
8.0
9.13 10.13 11.75 12.63 16.5 17.13
203
232
K
Center to Top in. 21.5 21.75 26.06 26.06 34.44 42.69 50.88
Open
mm 546 552 662 662 875 1084 1292
L
Center to Top in. 19.50 19.75 23.00 23.00 30.00 36.25 42.50
Closed
mm 495 502 584 584 762 921 1079
150
Detail A
Description
M
257
283
299
305
321
403
419
419
435
in.
10
10
10
10
14
18
24
mm
254
254
254
254
356
457
610
lbs.
Weight
Flanged Ends kg
67
70
126
135
215
386
654
30
32
57
61
98
175
297
Handwheel
Dia.
A1 A2
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. U.O.P. specification includes sizes 1½"-8".
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Butt weld ends; Flow calculations (Cv).
See Actuators & Accessories section for: Bevel gear, spur gear, chain wheel, motor or cylinder actuators; Bypasses, drains or auxiliary piping; Special packing, etc.
16
UOP HF Acid Gate Valves
Fig. No. 3654GR-HF8 (-M35-1)
ASME Class 600 Sizes ½- 2"
PARTS LIST
ITEM DESCRIPTION
10 11 16a 16b 30 31 35 36 46 49 50 52 54 55 56 59 70 71 98 150
Test Pressure
Shell Test................................2250 PSIG
Seat Test.................................1650 PSIG
Helium Shell Test......................500 PSIG
MATERIAL
ASTM A494 GR. M35-1
Monel® 400
Carbon Steel
ASTM A194 GR. 2HM
ASTM A494 GR. M35-1
12% Chrome
Monel® 400
Carbon Steel
Graphitic
Carbon Steel
Malleable Iron
Carbon Steel
Carbon Steel
Monel® Ring Joint
Carbon Steel
Carbon Steel
K-Monel®
Monel® 400
ASTM A193 GR. B7M
Carbon Steel & Monel®
Body
Seat Ring
Eyebolt Nut
Bonnet Stud Nut Bonnet
Yoke Sleeve
Gland
Gland Flange Packing
Eyebolt Pin
Handwheel
Eyebolt
Handwheel Nut Bonnet Gasket Jam Nut Grease Fitting Stem
Wedge
Bonnet Stud
Double Ball Grease Injector
54
50
56
31
59
52
36
16a
49
46
98
150
35
16b
30
55
70
10
71
11
30
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim Description
.5
.75
1
1.5
150
2
A1
to Face
Face
in.
6.5
7.5
8.5
9.5
11.5
mm
165
191
216
241
292
K
Center to
Top
in.
9.50
10.25
11.25
14.88
15.83
mm
241
261
286
378
402
L
Center
to Top
Closed
in.
8.63
9.21
10.00
13.00
13.65
mm
219
234
256
330
347
M
Handwheel
Dia.
in.
4.0
4.5
4.5
5.5
8
mm
102
114
114
140
203
Weight
Flanged
Ends
lbs.
11
16
22
40
60
kg
5.0
7.3
10.0
18.2
27.3
M
K&L
A A2
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. UOP specification is for ½"-1" size only.
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv).
17
UOP HF Acid Gate Valves
Fig. No. 3656G-HF8T
ASME Class 800 Sizes ½" - 2"
PARTS LIST
Test Pressure
Shell Test................................3000 PSIG
Seat Test.................................2200 PSIG
Helium Shell Test......................500 PSIG
54
50
31
56
70
52
36
16a
35
150
46
33
98
16b
DESCRIPTION
70 Stem
54 Handwheel Nut
50 Handwheel
31 Yoke Sleeve
56 Jam Nut
150 Grease Fitting 30 Bonnet
150 Double Ball Grease Injector
52 Eyebolt
16a Eyebolt Nut
36 Gland Flange 35 Gland
49 Eyebolt Pin
98 Bonnet Stud
16b Bonnet Stud Nut
33 Lantern Ring
46 Packing
55 Bonnet Gasket
10 Body
11 Seat Ring
71 Wedge
30
49
ITEM
55
10
11
MATERIAL
K-Monel®
Carbon Steel
Malleable Iron
12% Chrome
Carbon Steel
Carbon Steel
ASTM A216 GR. WCB or ASTM A105
Carbon Steel & Monel®
Carbon Steel
Carbon Steel
Carbon Steel
Monel®
Carbon Steel
ASTM A193 GR B7M
ASTM A194 GR 2HM
Monel®
Graphitic
Monel®/Graphite Spiral Wound
ASTM A216 GR. WCB or ASTM A105
Monel® W/PTFE Insert
Monel®
71
DIMENSIONS and WEIGHTS
Dim
Description
.5
K&L
A1
1.5
2
in.
3.5
3.5
4.13
4.75
5.25
mm
89
89
105
121
133
K
Center to Top
Open
in.
10.18
10.18
11.09
15.83
15.83
mm
259
259
282
402
402
L
Center to Top
Closed
in.
9.28
9.28
9.93
13.65
13.65
mm
236
236
252
347
347
K&L
M
Handwheel
Dia.
in.
4.25
4.25
4.25
5.50
8
mm
108
108
108
140
203
X
Bore Depth
Socket Weld End
in.
.5
.5
.5
.5
.62
mm
13
13
13
13
16
Y
Bore Diameter
Socket Weld End
in.
1.065
1.065
1.330
1.915
2.406
mm
27
27
34
49
61
lbs.
9
9
14
24
39
kg
4.1
4.1
6.4
10.9
17.7
Weight
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. U.O.P. specification includes sizes ½"-1".
Related data
See Technical Data section for: Temperature/pressure data, Flow calculations (Cv).
Grease injector details, see page 12 • PTFE seat details, see page 6.
18
1
End to End
Socket Weld End A1
M
VALVE SIZE (inches)
.75
UOP HF Acid Gate Valves
Fig. No. 150-HF8
ASME Class 150 Sizes 1½" - 36"
PARTS LIST
Test Pressure
ITEM DESCRIPTION
10 Body
11 Seat Ring
16b Bonnet Stud Nut
16a Eyebolt Stud Nut
20 Bearings
30 Bonnet
31 Yoke Sleeve
32 Bonnet Stem Bushing
35 Gland
36 Gland Flange
46 Packing
49 Eyebolt Pin
50 Handwheel
52 Eyebolt
54 Handwheel Nut
55* Bonnet Gasket
56 Jam Nut
70 Stem
71 Wedge
98 Bonnet Stud
Shell Test..................................... 450 PSIG
Seat Test...................................... 320 PSIG
Helium Shell Test......................... 450 PSIG
MATERIAL
ASTM A216 GR. WCB
Monel®
ASTM A194 GR. 2HM
ASTM A194 GR. 2H
Alloy Steel
ASTM A216 GR. WCB
Aluminum Bronze
Monel®
Monel®
Carbon Steel
Graphitic
Carbon Steel
Malleable Iron
Carbon Steel
Carbon Steel
Corr. Steel/PTFE Coated
Carbon Steel
Monel®
Monel®
ASTM A193 GR. B7M
54
31
56
50
20
70
16a
52
46
30
36
35
49
32
98
55
16b
10
11
71
* 1½"-3" are furnished with Monel®/graphitic spiral wound gaskets.
DIMENSIONS and WEIGHTS
Dim
Description
A1
Face to Face
Flanged Ends
A2
Face to Face
RTJ
K
Center to Top
Open
L
Center to Top
Closed
M
Handwheel
Dia.
Weight
Flanged Ends
VALVE SIZE (inches)
1.5 2
2 2 2.5 2 3 2
4
6
8
10
12
14
16
18
20
24
30
36
in.
6.50
7.0
7.5
8.0
9.0
10.5 11.5 13.0 14.0 15.0 16.0 17.0 18.0 20.0 24.0 28.0
mm
165
178
191
203
229
267
in.
7.00
7.5
8.0
8.5
9.5
11.0 12.0 13.5 14.5 15.5 16.5 17.5 18.5 20.5 24.5 28.5
mm
178
191
203
216
241
279
292
305
330
343
356
368
381
394
406
419
432
445
457
470
508
521
610
622
711
M
724
in. 17.38 17.75 19.31 19.31 28.19 34.38 43.63 51.50 57.81 62.94 72.5 79.06 86.56 104.3 140.0 155.0
mm
442
451
491
491
716
K
&
L
873 1108 1308 1468 1598 1841 2008 2198 2618 3556 3937
in. 15.19 15.38 16.06 16.06 23.44 27.69 34.63 40.19 45.44 48.68 56.5 61.38 67.25 80.0 110.0 119.0
mm
386
391
408
408
595
703
880 1020 1154 1236 1435 1560 1708 2032 2794 3023
in.
10
10
10
10
10
14
14
24
24
24
24
28
28
34
34
34
mm
254
254
254
254
254
356
356
610
610
610
610
711
711
864
864
864
lbs.
65
68
119
128
135
232
352
593
807 1053 1337 1898 2228 3350 6145 8170
kg
29
31
54
58
62
106
160
269
366
477
606
A1 A2
860 1010 1518 2787 3700
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. 1 ½" thru 3" furnished with round bonnet and Monel®/graphite spiral wound gasket.
3. U.O.P. specification includes sizes 1½"-24".
4. Helium shell test performed on sizes up through 14".
Related data
See Technical Data section for: Temperature/pressure data; Raised face or ring joint flanges; Flow calculations (Cv).
See Actuators & Accessories section for: Bevel gear, spur gear, chain wheel, motor or cylinder actuators; Bypasses, drains or auxiliary piping; Special packing, etc.
19
UOP HF Acid Gate Valves
Fig. No. 350-HF8
ASME Class 300 Sizes 1½" - 36"
PARTS LIST
Test Pressure
Shell Test................................. 1125 PSIG
Seat Test....................................825 PSIG
Helium Shell Test.......................500 PSIG
ITEM DESCRIPTION
54
50
31
10 Body
11 Seat Ring
16b Bonnet Stud Nut
16a Eyebolt Stud Nut
20 Bearings
30 Bonnet
31 Yoke Sleeve
32 Bonnet Stem Bushing
35 Gland
36 Gland Flange
46 Packing
49 Eyebolt Pin
50 Handwheel
52 Eyebolt
54 Handwheel Nut
55 Bonnet Gasket
56 Jam Nut
70 Stem
71 Wedge
98 Bonnet Stud
20
56
16a
52
36
35
49
46
30
32
55
70
16b
MATERIAL
98
ASTM A216 GR. WCB
Monel®
ASTM A194 GR. 2HM
ASTM A194 GR. 2H
Alloy Steel
ASTM A216 GR. WCB
Aluminum Bronze
Monel®
Monel®
Carbon Steel
Graphitic
Carbon Steel
Malleable Iron
Carbon Steel
Carbon Steel
Monel® Graphite Spiral Wound
Carbon Steel
Monel®
Monel®
ASTM A193 GR. B7M
71
11
10
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim
1.5 2
2.5
3
4
6
8
10
12
14
16
18
20
24
30
in.
7.5
8.5
9.5 11.13 12.0 15.88 16.5 18.0 19.75 30.0 33.0 36.0 39.0 45.0 55.0 68.0
mm
191
216
241
in.
8.0
9.13 10.13 11.75 12.63 16.5 17.13 18.63 20.38 30.63 33.63 36.63 39.63 45.88 56.0 69.13
mm
203
232
Face to Face
Flanged Ends
A2
Face to Face
RTJ
K
Center to Top
open
in. 17.38 17.75 19.31 19.31 28.13 36.13 43.88 51.06 57.81 66.31 72.25 79.06 88.38 102.4 138.0 156.0
Center to Top
Closed
in. 15.19 15.38 16.06 16.06 23.44 29.25 34.75 40.25 44.94 52.13 56.38 61.31 68.50 78.25 108.0 121.0
K&L
L
M
mm
mm
442
386
451
391
257
491
408
283
299
491
408
305
321
715
595
403
419
419
435
457
473
502
518
762
778
838
854
914
991 1143 1397 1727
930 1007 1165 1422 1756
918 1115 1297 1468 1684 1835 2008 2245 2602 3505 3962
743
883 1022 1141 1324 1432 1557 1740 1988 2743 3073
Handwheel
Dia.
in.
10
10
10
10
14
18
24
24
24
24
28
28
28
34
34
34
mm
254
254
254
254
356
457
610
610
610
610
711
711
711
864
864
864
Weight
Flanged Ends
lbs.
67
70
126
135
215
386
654
998 1317 1915 2608 3319 4278 7529 1081715300
kg
30
32
57
61
98
175
297
453
597
868 1182 1504 1938 3411 4907 6940
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
3. U.O.P. specification includes sizes 1½"-24".
4. Helium shell test performed on sizes up through 14".
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv).
See Actuators & Accessories section for: Bevel gear, spur gear, chain wheel, motor or cylinder actuators; Bypasses, drains or auxiliary piping; Special packing, etc.
20
36
A1
M
A 1 A2
Description UOP HF Acid Gate Valves
Fig. No. 350GR-HF8T
ASME Class 300 Sizes 1½" - 36"
PARTS LIST
Test Pressure
ITEM DESCRIPTION
MATERIAL
ASTM A216 GR. WCB
Monel® W/PTFE Insert
ASTM A194 GR. 2HM
ASTM A194 GR. 2H
Alloy Steel
Alloy Steel
ASTM A216 GR. WCB
Aluminum Bronze
Monel®
Monel®
Monel®
Carbon Steel
Graphitic
Carbon Steel
Malleable Iron
Carbon Steel
Carbon Steel
Soft Steel Ring
Carbon Steel
Monel®
Monel®
ASTM A193 GR. B7M
Carbon Steel & Monel®
10 Body
11 Seat Ring
16b Bonnet Stud Nut
16a Eyebolt Stud Nut
20 Bearings
21 Set Screw
30 Bonnet
31 Yoke Sleeve
32 Bonnet Stem Bushing 33 Lantern Ring
35 Gland
36 Gland Flange
46 Packing
49 Eyebolt Pin
50 Handwheel
52 Eyebolt
54 Handwheel Nut
55 Bonnet Gasket
56 Jam Nut
70 Stem
71 Wedge
98 Bonnet Stud
150 Dbl. Ball Grease Injector Shell Test................................ 1125 PSIG
Seat Test...................................825 PSIG
Helium Shell Test......................500 PSIG
54
50
31
20
56
30
16a
36
35
46
30
52
49
16b
30
55
150
32
98
70
11
71
10
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim
Description
A1
Face to Face
Flanged Ends
in.
7.5
8.5
9.5 11.13 12.0 15.88 16.5 18.0 19.75 30.0 33.0 36.0 39.0 45.0 55.0 68.0
mm
191
216
241
A2
Face to Face
RTJ
in.
8.0
9.13 10.13 11.75 12.63 16.5 17.13 18.63 20.38 30.63 33.63 36.63 39.63 45.88 56.0 69.13
mm
203
232
K
Center to Top
open
in. 17.38 17.75 19.31 19.31 28.13 36.13 43.88 51.06 57.81 66.31 72.25 79.06 88.38 102.4 138.0 156.0
L
Center to Top
Closed
in. 15.19 15.38 16.06 16.06 23.44 29.25 34.75 40.25 44.94 52.13 56.38 61.31 68.50 78.25 108.0 121.0
M
Handwheel
Dia.
in.
10
10
10
10
14
18
24
24
24
24
28
28
28
34
34
34
mm
254
254
254
254
356
457
610
610
610
610
711
711
711
864
864
864
Weight
Flanged Ends
lbs.
67
70
126
135
215
386
654
998 1317 1915 2608 3319 4278 7529 1081715300
kg
30
32
57
61
98
175
297
453
mm
mm
1.5 2
442
386
2 2 2.5 2 3 2
451
391
257
491
408
283
299
491
408
4
305
321
715
595
6
403
419
8
419
435
10
457
473
12
502
518
14
762
778
16
838
854
18
914
20
24
30
36
991 1143 1397 1727
M
930 1007 1165 1422 1756
918 1115 1297 1468 1684 1835 2008 2245 2602 3505 3962
743
K&L
883 1022 1141 1324 1432 1557 1740 1988 2743 3073
597
A1 A2
868 1182 1504 1938 3411 4907 6940
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. U.O.P. specification includes sizes 1½"-24".
3. Helium shell test performed on sizes up through 14".
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Butt weld ends; Flow calculations (Cv).
See Actuators & Accessories section for: Bevel gear, spur gear, chain wheel, motor or cylinder actuators; Bypasses, drains or auxiliary piping; Special packing, etc.
21
UOP HF Acid Gate Valves
Fig. No. 350GR-HF8-BTT
ASME Class 300 Sizes 1½" - 24"
Test Pressure
PARTS LIST
Shell Test................................ 1125 PSIG
Seat Test...................................825 PSIG
Helium Shell Test......................500 PSIG
ITEM DESCRIPTION
54
50
31
20
56
16a
36
35
52
49
46
32
55
30
70
16b
98
123
19
12
10
71
11
Detail A
10
A
MATERIAL
10 Body
ASTM A216 GR. WCB
11 Seat Ring
Monel®
16b Bonnet Stud Nut
ASTM A194 GR. 2HM
16a Eyebolt Stud Nut
ASTM A194 GR. 2H
20 Bearings
Alloy Steel
21 Set Screw
Alloy Steel
30 Bonnet
ASTM A216 GR. WCB
31 Yoke Sleeve
Aluminum Bronze
32 Bonnet Stem Bushing Monel®
33 Lantern Ring
Monel®
35 Gland
Monel®
36 Gland Flange
Carbon Steel
46 Packing
Graphitic
49 Eyebolt Pin
Carbon Steel
50 Handwheel
Malleable Iron
52 Eyebolt
Carbon Steel
54 Handwheel Nut
Carbon Steel
55 Bonnet Gasket
Soft Steel Ring
56 Jam Nut
Carbon Steel
70 Stem
Monel®
71 Wedge
Monel®
98 Bonnet Stud
ASTM A193 GR. B7M
150 Dbl. Ball Grease Injector Carbon Steel & Monel®
123 Compression Ring
Monel®
19 Cap Screw
K-Monel® 500
12 Insert
PTFE
Figure No. 350 L (2) P-HF8
includes a Monel® sleeve
that lines the stuffing box.
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim
M
Description
1.5 2
2 2.5 3 2
2
2
4
6
8
10
12
14
16
18
20
24
30
in.
7.5
8.5
9.5 11.13 12.0 15.88 16.5 18.0 19.75 30.0 33.0 36.0 39.0 45.0 55.0 68.0
mm
191
216
241
in.
8.0
9.13 10.13 11.75 12.63 16.5 17.13 18.63 20.38 30.63 33.63 36.63 39.63 45.88 56.0 69.13
mm
203
232
A1
Face to Face
Flanged Ends
A2
Face to Face
RTJ
K
Center to Top
open
in. 17.38 17.75 19.31 19.31 28.13 36.13 43.88 51.06 57.81 66.31 72.25 79.06 88.38 102.4 138.0 156.0
L
Center to Top
Closed
in. 15.19 15.38 16.06 16.06 23.44 29.25 34.75 40.25 44.94 52.13 56.38 61.31 68.50 78.25 108.0 121.0
M
Handwheel
Dia.
in.
10
10
10
10
14
18
24
24
24
24
28
28
28
34
34
34
mm
254
254
254
254
356
457
610
610
610
610
711
711
711
864
864
864
Weight
Flanged Ends
lbs.
67
70
126
135
215
386
654
998 1317 1915 2608 3319 4278 7529 1081715300
kg
30
32
57
61
98
175
297
453
K&L
A1 A2
mm
mm
442
386
451
391
257
491
408
283
299
491
408
305
321
715
595
403
419
419
435
457
473
502
518
762
778
838
854
914
991 1143 1397 1727
930 1007 1165 1422 1756
918 1115 1297 1468 1684 1835 2008 2245 2602 3505 3962
743
883 1022 1141 1324 1432 1557 1740 1988 2743 3073
597
868 1182 1504 1938 3411 4907 6940
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. U.O.P. specification includes sizes 1½"-24".
3. Helium shell test performed on sizes up through 14".
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Butt weld ends; Flow calculations (Cv).
See Actuators & Accessories section for: Bevel gear, spur gear, chain wheel, motor or cylinder actuators; Bypasses, drains or auxiliary piping; Special packing, etc.
22
36
UOP HF Acid Globe Valves
Fig. No. 3367G-HF8T
ASME Class 300 Sizes ½" - 2"
PARTS LIST
Test Pressure
ITEM DESCRIPTION
54 Handwheel Nut
Shell Test................................ 1125 PSIG
Seat Test...................................825 PSIG
Helium Shell Test......................500 PSIG
MATERIAL
50 Handwheel
31 Yoke Sleeve
52 Eyebolt
16a Eyebolt Nut
36 Gland Flange
35 Gland
49 Eyebolt Pin
16b Bonnet Stud Nut
30 Bonnet
55 Bonnet Gasket
10 Body
70 Stem
46 Packing
150 Double Ball Grease Injector
33 Lantern Ring
72 Disc Nut
113 Thrust Plate
71 Disc
11 Seat Ring
98 Bonnet Stud
Carbon Steel
Ductile Iron
12% Chrome
Carbon Steel
Carbon Steel
Carbon Steel
Monel®
Carbon Steel
ASTM A194 GR. 2HM
ASTM A216 GR. WCB
Monel®/Graphite Spiral Wound
ASTM A216 GR. WCB
K-Monel®
Graphitic
Carbon Steel & Monel®
Monel®
Monel®
Monel® Monel® w/PTFE Insert
Monel® ASTM A193 GR. B7M
54
50
31
52
36
49
16b
16a
70
46
150
33
35
98
30
56
10
71
11
72
113
M
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim
Description
in.
.5
6.0
.75
7.0
1
8.0
1.25
8.5
1.5
9.0
2
10.5
1178
203
216
229
267
A1
Face to Face
Flanged Ends mm
152
Face to Face
RJT
in.
6.44
7.5
8.5
9.0
9.5
11.13
A2
mm
164
191
216
229
241
283
in.
Center to Injector
End–Body mm
3.37
3.5
3.5
3.5
3.5
3.62
86
89
89
89
89
92
J
K
Center to Top
Open
in.
8.13
9.0
9.63
12.0
13.75
14.13
mm
206
229
244
305
349
359
L
Center to Top
Closed
in.
7.38
8.63
8.88
11.25
12.13
12.88
mm
187
219
225
286
308
327
M
Handwheel
Dia.
in.
3.5
4.5
4.5
8
8
8
mm
89
114
114
203
203
203
lbs.
10
15
22
36
44
63
kg
4.5
6.8
10.0
16.3
20.0
28.6
Weight
K&L
A1 A2
K&L
J
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. U.O.P specification includes sizes ½"-1".
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv).
Grease injector details, see page 12 • PTFE seat details, see page 9.
23
UOP HF Acid Globe Valves
Fig. No. 665-HF8 (-M35-1)
ASME Class 600 Sizes ½" - 1"
PARTS LIST
Test Pressure 665-HF8
Shell Test................................2250 PSIG
Seat Test.................................1650 PSIG
Helium Shell Test......................500 PSIG
54 Handwheel Nut
Carbon Steel
70 Stem
K-Monel®
50 Handwheel
Malleable Iron
31 Yoke Sleeve
12% Chrome
52 Eyebolt
Carbon Steel
16b Eyebolt Nut
Carbon Steel
36 Gland Flange
Carbon Steel
35 Gland
Monel®
49 Eyebolt Pin
Carbon Steel
46 Packing
Graphitic
33 Lantern Ring
Monel®
98 Bonnet Stud
ASTM A193 GR. B7M
16a Bonnet Stud Nut
ASTM A194 GR. 2HM
30 Bonnet
ASTM A216 GR. WCB
55 Bonnet Gasket
Soft Steel Ring
32 Bonnet Stem Bushing
Monel®
150 Double Ball Carbon Steel & Monel®
Grease Injector 72 Disc Nut
Monel®
71 Disc
Monel®
113 Thrust Plate
Monel® 11 Seat Ring
Monel® 10 Body
ASTM A216 GR. WCB
Test Pressure 665-HF8 (-M35-1)
Shell Test................................2175 PSIG
Seat Test.................................1600 PSIG
Helium Shell Test......................500 PSIG
54
50
70
31
52
16b
36
35
49
46
33
16a
32
98
30
55
72
113
71
MATERIAL
665-HF8
665-HF8 (-M35-1)
ITEM DESCRIPTION
150
11 150
Carbon Steel
K-Monel®
Malleable Iron
12% Chrome
Carbon Steel
Carbon Steel
Carbon Steel
Monel®
Carbon Steel
Graphitic
Monel®
ASTM A193 GR. B7M
ASTM A194 GR. 2HM
ASTM A494 GR. M35-1
Monel® Ring
Monel®
Carbon Steel & Monel®
Monel®
Monel®
Monel® Monel® ASTM A494 GR. M35-1
10
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
.5
.75
1
Face to Face
Flanged Ends
in.
6.5
7.5
8.5
mm
165
191
216
Face to Face
RTJ
in.
6.44
7.5
8.5
Dim Description
M
A1
K&L
K&L
A2
J
J
K
mm
164
191
216
Center to Injector in.
End–Body
mm
4.25
4.25
4.25
108
108
108
13
14.63
14
Center to Top
Open
in.
mm
330
371
356
Center to Top
Closed
in.
12.63
13.63
12.75
mm
321
346
324
Handwheel
Dia.
in.
4.5
5.5
5.5
mm
114
140
140
Weight
Flanged Ends
lbs.
22
31
42
kg
10
14.1
19.1
A 1 A2
L
M
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. U.O.P specification includes sizes ½"-1".
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv).
Grease injector details, see page 12.
24
UOP HF Acid Globe Valves
Fig. No. 3667-HF8 (-M35-1)
ASME Class 600 Sizes ½" - 2"
PARTS LIST
Test Pressure
DESCRIPTION
ITEM
10 Body
11 Seat Ring
16a Eyebolt Nut
16b Bonnet Stud Nut 30 Bonnet
31 Yoke Sleeve
35 Gland
36 Gland Flange 46 Packing
49 Eyebolt Pin
50 Handwheel
52 Eyebolt
54 Handwheel Nut 55 Bonnet Gasket 70 Stem
71 Disc
72 Disc Nut
113 Thrust Plate
98 Bonnet Stud
Shell Test................................2250 PSIG
Seat Test.................................1650 PSIG
Helium Shell Test......................500 PSIG
MATERIAL
ASTM A494 GR. M35-1
Monel®
Carbon Steel
ASTM A194 GR. 2HM
ASTM A494 GR. M35-1
12% Chrome
Monel®
Carbon Steel
Graphitic
Carbon Steel
Malleable Iron
Carbon Steel
Carbon Steel
Monel®/Graphite Spiral Wound
K-Monel®
Monel®
Monel®
Monel®
ASTM A193 GR. B7M
54
31
50
52
36
16a
70
49
16b
46
98
55
10
71
35
30
72
113
11
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim A1
K
Description
.5
.75
Face to Face in.
Flanged End
mm
6.5
7.5
165
191
216
241
292
8.13
9.0
9.63
13.75
14.13
Center to
Top
in.
1
8.5
1.5
9.5
2
mm
206
229
244
350
359
L
Center to Top in.
Closed
mm
7.38
8.63
8.88
12.13
12.88
187
219
225
308
327
M
Handwheel in.
Dia.
mm
3.5
4.5
4.5
8
8
Weight
Flanged Ends
M
11.5
89
114
114
203
203
lbs.
10
15
22
44
63
kg
4.5
6.8
10.0
20.0
28.6
K&L
A1
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv).
25
Fig. No. 667-HF8
UOP HF Acid Globe Valves
ASME Class 800 Sizes ½" - 1"
Test Pressure
PARTS LIST
Shell Test................................3000 PSIG
Seat Test.................................2200 PSIG
Helium Shell Test......................500 PSIG
54
ITEM DESCRIPTION
54 Handwheel Nut
50
70
31
52
36
16a
30
70
35
46
46
33
98
16b
30
55
32
150
10
72
113
71
11
150
50
31 52
16a
36 46
98 16b 32 55 72
71
11
30
70
35
46 150
33
10
113
Handwheel
Yoke Sleeve
Eyebolt
Eyebolt Nut
Gland Flange
Eyebolt Pin
Bonnet Stud
Bonnet Stud Nut
Bonnet Stem Bushing
Bonnet Gasket
Disc Nut
Disc
Seat Ring
Bonnet
Stem
Gland
Packing
Double Ball Grease Injector
Lantern Ring
Body
Thrust Plate
MATERIAL
Carbon Steel
Malleable Iron
12% Chrome
Carbon Steel
Carbon Steel
Carbon Steel
Carbon Steel
ASTM A193 GR. B7M
ASTM A194 GR. 2HM
Monel®
Soft Steel Ring
Monel®
Monel®
Monel® ASTM A216 GR. WCB
K-Monel®
Monel®
Graphitic
Carbon Steel & Monel® Monel®
ASTM A216 GR. WCB
Monel® DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim Description
A1
M
K
K&L
K&L
L
M
X
.5
.75
1
End to End
Socket Weld End
in.
4.5
5.13
5.13
mm
114
131
131
Center to Top
Open
in.
12
13.88
13.88
Center to Top
Closed
Handwheel
Dia.
Bore Depth
Socket Weld End
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. U.O.P specification includes sizes ½"-1".
Related data
See Technical Data section for: Temperature/pressure data, Flow calculations (Cv).
Grease injector details, see page 12.
26
305
352
352
in.
11.63
12.88
12.88
mm
295
327
327
in.
4.5
5.5
5.5
mm
114
140
140
in.
.37
.5
.5
mm
10
13
13
Bore Dia.
Socket Weld End
in.
.855
1.065
1.330
mm
22
27
32
Weight
lbs.
18
25
32
kg
8.2
11.3
14.5
A1
Y
mm
UOP HF Acid Globe Valves
Fig. No. 3669-HF8
ASME Class 800 Sizes ½" - 2"
Test Pressure
PARTS LIST
ITEM DESCRIPTION
MATERIAL
10 Body
11 Seat Ring 16a Eyebolt Nut
16b Bonnet Stud Nut
30 Bonnet
31 Yoke Sleeve
35 Gland
36 Gland Flange
46 Packing
49 Eyebolt Pin
50 Handwheel
52 Eyebolt
54 Handwheel Nut
55 Bonnet Gasket
70 Stem
71 Disc
72 Disc Nut
98 Bonnet Stud
113 Thrust Plate
ASTM A216 GR. WCB or ASTM A105
Monel®
ASTM A194 GR. 2H
ASTM A194 GR. 2HM
ASTM A216 GR. WCB or ASTM A105
12% Chrome
Monel®
Carbon Steel
Graphitic
Carbon Steel
Malleable Iron
Carbon Steel
Carbon Steel
Monel®/Graphite Spiral Wound
K-Monel®
Monel®
Monel®
ASTM A193 GR. B7M
Monel®
Shell Test................................3000 PSIG
Seat Test.................................2200 PSIG
Helium Shell Test......................500 PSIG
54
50
31
70
16a
52
36
35
49
46
98
16b
30
55
10
72
113
71
11
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim A1
K
Description
in.
End to End
Socket Weld End mm
Center to Top
Open
L
Center to Top
Closed
M
Handwheel
Dia.
in.
.75
1
1.25
1.5
2
3.63
4.5
5.13
6.25
7.0
8.38
114
114
130
159
178
213
8.63
8.63
9.50
11.75
13.13
14.25
mm
220
220
242
299
334
362
in.
8.38
8.38
8.88
11.25
12.13
13.00
mm
213
213
226
286
309
331
in.
4.5
4.5
4.5
8
8
8
mm
114
114
114
203
203
203
in.
.5
.5
.5
.5
.5
.62
13
13
13
13
13
16
1.065
1.065
1.330
1.675
1.915
2.406
X
Bore Depth
Socket Weld End mm
Y
in.
Bore Dia.
Socket Weld End mm
Weight
.5
27
27
34
43
49
61
lbs.
9
9
13
26
30
49
kg
4.1
4.1
5.9
11.8
13.6
22.2
M
K&L
A1 A2
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. U.O.P specification includes sizes ½"-2".
Related data
See Technical Data section for: Temperature/pressure data, Flow calculations (Cv).
27
Fig. No. 3669G-HF8T
UOP HF Acid Globe Valves
ASME Class 800 Sizes ½" - 2"
PARTS LIST
Test Pressure
Shell Test................................3000 PSIG
Seat Test.................................2200 PSIG
Helium Shell Test......................500 PSIG
54
50
31
70
16a
52
36
35
49
46
98
16b
30
55
10
72
113
71
11
ITEM DESCRIPTION
MATERIAL
54
50
70
31
52
16a
36
35
49
46
98
16b
30
55
72
71
33
150
10
11
Carbon Steel
Malleable Iron
K-Monel®
12% Chrome
Carbon Steel
Carbon Steel
Carbon Steel
Monel®
Carbon Steel
Graphitic
ASTM A193 GR. B7M ASTM A194 GR. 2HM
ASTM A216 GR. WCB or ASTM A105
Monel®/Graphite Spiral Wound
Monel®
Monel® w/PTFE Insert
Monel®
Carbon Steel
Handwheel Nut
Handwheel
Stem
Yoke Sleeve
Eyebolt
Eyebolt Nut
Gland Flange
Gland
Eyebolt Pin
Packing
Bonnet Stud Bonnet Stud Nut
Bonnet
Bonnet Gasket
Disc Nut
Disc
Lantern Ring
Double Ball Grease Injector Body
Seat Ring
ASTM A216 GR. WCB or ASTM A105
Monel®
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim M
A1
K
L
K&L
M
X
A1
Y
Description
End to End
Socket Weld End
Center to Top
Open
Center to Top
Closed
Handwheel
Dia.
Bore Depth
Socket Weld End
Bore Dia.
Socket Weld End
Weight
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. U.O.P specification includes sizes ½"-1".
Related data
See Technical Data section for: Temperature/pressure data, Flow calculations (Cv).
Grease injector details, see page 12.
28
in.
.5
3.63
.75
4.5
1
5.13
1.5
7.0
2
8.38
mm
114
114
130
178
213
in.
8.63
8.63
9.50
13.13
14.25
mm
220
220
242
334
362
in.
8.38
8.38
8.88
12.13
13.00
mm
213
213
226
309
331
in.
4.5
4.5
4.5
8
8
mm
114
114
114
203
203
in.
.5
.5
.5
.5
.62
mm
13
13
13
13
16
in.
1.065
1.065
1.330
1.915
2.406
mm
27
27
34
49
61
lbs.
9
9
13
30
49
kg
4.1
4.1
5.9
13.6
22.2
UOP HF Acid Globe Valves
Fig. No. 160-HF8
ASME Class 150 Sizes 1½" - 12"
Test Pressure
PARTS LIST
ITEM DESCRIPTION
54 Handwheel Nut
Shell Test..................................450 PSIG
Seat Test...................................320 PSIG
Helium Shell Test......................450 PSIG
MATERIAL
50 Handwheel
31 Yoke Sleeve
70 Stem
52 Eyebolt
16a Eyebolt Nut
36 Gland Flange
35 Gland
49 Eyebolt Pin
30 Bonnet
46 Packing
55 Bonnet Gasket
32 Bonnet Stem Bushing 72 Disc Nut
11 Seat Ring 113 Thrust Plate
71 Disc
10 Body
98 Bonnet Stud
16b Bonnet Stud Nut
85 Handwheel Washer
Carbon Steel
Ductile Iron
Aluminum Bronze
Monel®
Carbon Steel
Carbon Steel
Carbon Steel
Monel®
Carbon Steel
ASTM A216 GR. WCB
Graphitic
Corr. Soft Steel/PTFE Coated
Monel®
Monel®
Monel®
Monel®
Monel®
ASTM A216 GR. WCB
ASTM A193 GR. B7M
ASTM A194 GR. 2HM
12% Chrome
54
50
31
85
52
36
35
49
16a
70
98
46
16b
30
32
55
72
71
11
113
10
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim Description
A1
Face to Face
Flanged Ends
1.5
2
2.5
3
4
6
8
10
12
27.50
in.
6.50
8.00
8.50
9.50
11.50
16.00
19.50
24.50
mm
165
203
216
241
292
406
495
622
699
A2
Face to Face
RJT
in.
7.00
8.50
9.00
10.00
12.00
16.50
20.00
25.00
mm
178
216
229
254
305
419
508
635
K
Center to Top
Open
in.
12.25
14.75
15.62
16.37
19.62
25.62
28.62
29.50
mm
311
375
397
416
498
651
727
749
Center to Top
Closed
in.
11.38
13.50
14.37
14.75
17.62
23.00
26.00
26.87
mm
289
343
365
375
448
584
660
683
794
Handwheel
Dia.
in.
8
8
10
10
10
14
18
18
18
mm
203
203
254
254
254
356
457
457
457
Weight
Flanged Ends
lbs.
30
50
69
84
138
238
411
598
824
kg
14
23
32
38
63
108
186
271
374
L
M
M
28.00
711
35.25
K&L
895
31.25
A1 A 2
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. U.O.P specification includes sizes 2"-8".
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv):
See Actuators & Accessories section for: Bevel gear, spur gear, chain wheel, motor or cylinder actuators; Bypasses, drains or auxiliary piping; Special packing, etc.
29
UOP HF Acid Globe Valves
Fig. No. 360-HF8
ASME Class 300 Sizes 1½" - 12"
Test Pressure
PARTS LIST
Shell Test................................ 1125 PSIG
Seat Test...................................825 PSIG
Helium Shell Test......................500 PSIG
ITEM DESCRIPTION
54 Handwheel Nut
54
50
31
36
35
16a
49
70
98
46
16b
30
32
55
72
71
11
Carbon Steel
Ductile Iron
Aluminum-Bronze
Monel®
Carbon Steel
Carbon Steel
Carbon Steel
Monel®
Carbon Steel
ASTM A216 GR WCB
Graphitic
Corr. Soft Steel/PTFE Coated
Monel®
Monel®
Monel®
Monel®
Monel®
ASTM A216 GR WCB
ASTM A193 GR B7M
ASTM A194 GR 2HM
12% Chrome
50 Handwheel
31 Yoke Sleeve
70 Stem
52 Eyebolt
16a Eyebolt Nut
36 Gland Flange
35 Gland
49 Eyebolt Pin
30 Bonnet
46 Packing
55 Bonnet Gasket
32 Bonnet Stem Bushing 72 Disc Nut
11 Seat Ring Facing 113 Thrust Plate
71 Disc
10 Body
98 Bonnet Stud
16b Bonnet Stud Nut
85 Handwheel Washer
85
52
MATERIAL
113
10
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
M
K&L
Dim Description
A1
Face to Face
Flanged Ends
A2
Face to Face
RJT
K
Center to Top
Open
L
M
A1 A 2
Center to Top
Closed
Handwheel
Dia.
Weight
Flanged Ends
2
2.5
3
4
6
in. 9.00
10.50
mm 229
267
11.50
12.50
14.00
17.50
292
318
356
445
in. 9.50
mm 241
11.13
12.13
13.13
14.13
18.13
283
308
333
371
460
in. 15.63
18.25
20.00
20.75
24.87
28.75
mm 397
464
508
527
632
730
in. 14.38
13.50
14.63
15.88
17.50
21.88
mm 365
435
476
479
581
657
in.
1.5
8
10
22.0024.50 28.00
559 622
711
22.6325.13 28.63
575 638
727
31.3734.37 48.00
797 873
1219
26.0032.50 36.25
724 800
1143
8
8
10
10
14
18
18 34
34
mm 203
203
254
254
356
457
457 864
864
lbs. 60
79
104
137
224
388
6351258
1698
kg 27
36
47
62
102
176
288 571
770
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. U.O.P specification includes sizes 2"-6".
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv).
See Actuators & Accessories section for: Bevel gear, spur gear, chain wheel, motor or cylinder actuators; Bypasses, drains or auxiliary piping; Special packing, etc.
30
12
UOP HF Acid Globe Valves
Fig. No. 360GR-HF8T
ASME Class 300 Sizes 1½" - 12"
Test Pressure
PARTS LIST
ITEM DESCRIPTION
Shell Test................................ 1125 PSIG
Seat Test...................................825 PSIG
Helium Shell Test......................500 PSIG
MATERIAL
54 Handwheel Nut
50 Handwheel
31 Yoke Sleeve
70 Stem
52 Eyebolt
16a Eyebolt Nut
36 Gland Flange
35 Gland
49 Eyebolt Pin
30 Bonnet
46 Packing
55 Bonnet Gasket
32 Bonnet Stem Bushing 72 Disc Nut
11 Seat Ring 113 Thrust Plate
71 Disc
10 Body
98 Bonnet Stud
16b Bonnet Stud Nut
150 Double Ball
Grease Injector
85 Handwheel Washer
33 Lantern Ring
Carbon Steel
Ductile Iron
Aluminum Bronze
Monel®
Carbon Steel
Carbon Steel
Carbon Steel
Monel®
Carbon Steel
ASTM A216 GR. WCB
Graphitic
Soft Steel Ring
Monel®
Monel®
Monel®
Monel®
Monel® w/PTFE Insert
ASTM A216 GR. WCB
ASTM A193 GR. B7M
ASTM A194 GR. 2HM
Carbon Steel & Monel®
54
50
85
31
70
52
36
35
16a
49
46
150
33
30
55
32
16b
98
72
113
71
11
12% Chrome
Monel®
10
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim Description
A1
Face to Face
Flanged Ends
A2
Face to Face
RJT
K
Center to Top
Open
L
M
Center to Top
Closed
Handwheel
Dia.
Weight
Flanged Ends
1.5
in.
9.00
2
10.50
2.5
3
4
6
11.50
12.50
14.00
17.50
8
22.00
10
24.50
12
28.00
mm
229
267
292
318
356
445
559
622
711
in.
9.50
11.13
12.13
13.13
14.13
18.13
22.63
25.13
28.63
mm
241
283
308
333
371
460
575
638
727
in.
15.63
14.25
15.50
16.88
18.75
23.63
28.25
35.25
39.50
mm
397
362
394
429
477
601
718
896
1004
in.
14.38
13.50
14.63
15.88
17.50
21.88
26.00
32.50
36.25
mm
364
343
372
404
445
556
661
826
921
in.
8
8
10
10
14
18
18
22
22
mm
203
203
254
254
356
457
457
559
559
lbs.
60
64
106
124
177
366
602
899
1589
kg
27
29
48
56
80
165
271
405
716
M
K&L
1
A2
Footnote
• U.O.P specification includes sizes 2½"-8". Notes:
1. This data is not to be used for construction unless confirmed by the factory.
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv).
See Actuators & Accessories section for: Bevel gear, spur gear, chain wheel, motor or cylinder actuators; Bypasses, drains or auxiliary piping; Special packing, etc.
31
UOP HF Acid Globe Valves
Fig. No. 366-HF8 (-M35-1)
ASME Class 300 Sizes 1½" - 8"
PARTS LIST
Test Pressure 366-HF8
Shell Test................................ 1125 PSIG
Seat Test...................................825 PSIG
Helium Shell Test......................500 PSIG
MATERIAL
ITEM
DESCRIPTION
366-HF8
366-HF8-M35-1
54 Handwheel Nut
Carbon Steel
Carbon Steel
Test Pressure 366-HF8 (-M35-1)
Shell Test................................ 1100 PSIG
Seat Test...................................800 PSIG
Helium Shell Test......................500 PSIG
54
50
54
31
50
31
52
36
52
35
36
49
35
49 98
85
85
70
16a
70
16a
46
33
46 16b
33
16b55
98 30
32
30
32
72
55
72 113
11
71
113
11
71
50 31 70 52 16a 36 35 49 30 33 150 46 55 32 72 11
113 71 10 98 16b
85
Handwheel
Ductile Iron
Ductile Iron
Yoke Sleeve
Aluminum Bronze
Aluminum Bronze
Stem
Monel®
Monel®
Eyebolt
Carbon Steel
Carbon Steel
Eyebolt Nut
Carbon Steel
Carbon Steel
Gland Flange
Carbon Steel
Carbon Steel
Gland
Monel®
Monel®
Eyebolt Pin
Carbon Steel
Carbon Steel
Bonnet
ASTM A216 GR WCB
ASTM A494 GR M35-1
Monel®
Lantern Ring
Monel®
Double Ball
Carbon Steel & Monel®
Carbon Steel & Monel®
Grease Injector
Packing
Graphitic
Graphitic
Bonnet Gasket
Soft Steel Ring
Monel® Ring
Monel®
Bonnet Stem Bushing Monel®
Disc Nut Monel®
Monel®
Seat Ring
Monel®
Monel®
Thrust Plate
Monel®
Monel®
®
Disc
Monel Monel®
Body ASTM A216 GR. WCB
ASTM A494 GR. M35-1
Bonnet Stud ASTM A193 GR. B7M
ASTM A193 GR. B7M
Bonnet Stud Nut
ASTM A194 GR. 2HM
ASTM A194 GR. 2HM
Handwheel Washer
12% Chrome
12% Chrome
10
DIMENSIONS and WEIGHTS
10
150
150 33
33
M
K&L
Description 1.5
2
2.5
3
4
6
A1
in.
Face to Face
Flanged Ends mm
9.00
10.50
11.50
12.50
14.00
17.50
22.00
229
267
292
318
356
445
559
A2
in.
Face to Face
RJT
mm
9.50
11.13
12.13
13.13
14.63
18.13
22.63
241
283
308
333
371
460
575
J
in.
Center to Injector
End–Body mm
5.18
5.50
5.87
6.12
7.00
7.62
9.00
132
140
149
155
178
194
229
K
in.
Center to Top
Open
mm
15.63
14.25
15.50
16.88
18.75
23.63
28.25
397
362
394
429
477
601
718
L
in.
Center to Top
Closed
mm
14.38
13.50
14.63
15.88
17.50
21.88
26.00
365
343
372
404
445
556
661
M
1
A2
VALVE SIZE (inches)
Dim in.
8
8
8
8
14
18
18
mm
203
203
203
203
356
457
457
lbs.
Weight
Flanged Ends kg
60
64
106
124
177
366
602
27
29
48
56
80
165
271
Handwheel
Dia.
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. U.O.P specification includes sizes 1½"-8".
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv).
See Actuators & Accessories section for: Bevel gear, spur gear, chain wheel, motor or cylinder actuators; Bypasses, drains or auxiliary piping; Special packing, etc.
32
8
UOP HF Acid Check Valves
Fig. No. 3682-HF8 (-M35-1)
ASME Class 800 Sizes ½" - 2"
PARTS LIST
Test Pressure
3682-HF8
ITEM DESCRIPTION
98
16 30 55 71 10 11 Bonnet Stud
Bonnet Stud Nut Bonnet Cap
Bonnet Gasket Disc
Body
Seat Ring
MATERIAL
3682-HF8 (-M35-1)
ASTM A193 GR. B7M
ASTM A194 GR. 2HM
ASTM A216 GR. WCB or A515 GR. 70
Monel®/Graphite Spiral Wound
Monel®
ASTM A105 or ASTM A216 GR. WCB
Monel®
Shell Test................................3000 PSIG
Seat Test.................................2200 PSIG
Helium Shell Test......................500 PSIG
ASTM A193 GR. B7M
ASTM A193 GR. 2HM
ASTM A494 GR . M35-1
Monel®/Graphite Spiral Wound
Monel®
ASTM A494 GR . M35-1
Monel®
98
98
30
16
16
30
55
55
71
71
11
11
10
10
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim Description A1
K
X
Y
.5
.75
1
1.5
2
in.
3.63
4.5
5.13
7.0
8.38
mm
92
114
130
178
213
in.
2.5
3.0
3.38
5.0
5.5
mm
64
76
87
127
140
Bore Depth Socket Weld End
in.
.37
.5
05
.5
.62
mm
10
13
13
13
16
Bore Dia. Socket Weld End
in.
.855
1.065
1.330
1.915
2.406
mm
22
27
34
49
61
lbs.
3
6
9
20
35
kg
1.4
2.7
4.1
9.1
15.9
End to End Socket Weld End
Center to
Top
Weight
K
K
A1
A1
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. U.O.P specification includes sizes ½"-2".
Related data
See Technical Data section for: Temperature/pressure data, Flow calculations (Cv).
33
UOP HF Acid Check Valves
Fig. No. 3680-HF8 (-M35-1)
ASME Class 600 Sizes ½" - 1"
PARTS LIST
Test Pressure
Shell Test................................3000 PSIG
Seat Test.................................2200 PSIG
Helium Shell Test......................500 PSIG
98
16
30
55
ITEM DESCRIPTION
MATERIAL
ASTM A193 GR. B7M
ASTM A194 GR. 2Hm
ASTM A494 GR. M35-1
Monel® Ring
Monel®
ASTM A494 GR. M35-1
Monel®
98 Bonnet Stud
16 Bonnet Stud Nut
30 Bonnet Cap
55 Bonnet Gasket
71 Disc
10 Body
11 Seat Ring
71
11
10
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim A 1
K
K
Description
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. U.O.P specification includes sizes ½"-1".
Related data
See Technical Data section for: Temperature/pressure data, Flow calculations (Cv).
34
.5
.75
1
6.50
7.50
8.50
End to End
Flanged Ends mm
165
191
216
in.
2.60
3.15
3.55
mm
66
80
90
lbs.
8
14
19
kg
3.6
6.4
8.6
Center to
Top
Weight
Flanged Ends A1
in.
UOP HF Acid Check Valves
Fig. No. 180-HF8
ASME Class 150 Sizes 1½" - 30"
PARTS LIST
Test Pressure
ITEM DESCRIPTION
MATERIAL
ASTM A193 GR. B7M
ASTM A194 GR. 2HM
Corr. Steel/PTFE Coated
ASTM A216 GR .WCB or A515 GR. 70
Monel®
Monel®
ASTM A216 GR. WCB
Monel®
Monel®
Monel®
Monel®
Monel®
98
16
55
30
40
41
10
11
49
71
85
72
Bonnet Stud
Bonnet Stud Nut Bonnet Gasket
Bonnet Cap
Hinge
Hinge Pin
Body
Seat Ring Disc Nut Pin
Disc Disc Nut Washer Disc Nut
Shell Test..................................450 PSIG
Seat Test...................................320 PSIG
Helium Shell Test......................450 PSIG
98
16
30
55
41
40
72
85
49
71
11
10
K
A 1A 2
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim Description
1.5
2
2.5
in.
6.50
8.00
8.50
9.50 11.50 14.00 19.50 24.50 27.50 31.00 34.00 38.50 38.50 51.00 60.00
241
A1
A2
K
Face to Face
Flanged Ends
Face to Face
RJT
Center to
Top
Weight
Flanged Ends
3
4
292
6
356
8
495
10
30
203
216
9.00 10.00 12.00 14.50 20.00 25.00 28.00 31.50 34.50 39.00 39.00 51.50 61.00
991
978
24
8.50
876
978
20
165
800
864
18
7.00
711
787
16
in.
635
699
14
mm
508
622
12
mm
178
216
229
254
305
368
in.
3.88
5.37
6.00
6.50
7.50
9.25 11.25 11.87 13.62 15.87 21.12 22.25 24.75 34.00 39.25
mm
98
137
152
165
191
235
286
302
346
403
536
lbs.
26
39
50
65
104
180
336
519
703
900
1175 1497 2370 4580 5900
kg
12
18
23
29
47
82
152
235
319
408
533
565
679
991
1295 1524
629
1308 1550
864
997
1075 2077 2667
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. U.O.P specification includes sizes 2"-16".
3. Helium shell test performed on sizes up through 14".
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv).
35
UOP HF Acid Check Valves
Fig. No. 380-HF8
ASME Class 300 Sizes 1½" - 30"
PARTS LIST
Test Pressure
Shell Test................................ 1125 PSIG
Seat Test...................................825 PSIG
Helium Shell Test......................500 PSIG
ITEM DESCRIPTION
98
16
30
55
41
40
72
85
49
98
16
30
55
41
40
10
72
85
71
49
11
Bonnet Stud
Bonnet Stud Nut Bonnet Cap
Bonnet Gasket
Hinge Pin
Hinge**
Body
Disc Nut
Disc Nut Washer Disc Disc Nut Pin
Seat Ring Facing MATERIAL
ASTM A193 GR. B7M
ASTM A194 GR. 2HM
ASTM A216 GR. WCB or A515 GR. 70
Corr. Steel/PTFE Coated
Monel®
Monel®
ASTM A216 GR. WCB
Monel®
Monel®
Monel®
Monel®
Monel®
**30" size has internal hinge bracket. Figure No. 384-HF8.
71
11
10
K
A1 A2
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim A1
A2
K
Description
1.5
2
2.5
3
4
6
8
10
14
16
18
20
24
30
Face to Face
Flanged Ends
9.50 10.50 11.50 12.50 14.00 17.50 21.00 24.50 28.00 33.00 34.00 38.50 40.00 53.00 62.75
mm
241
Face to Face
RJT
in. 10.00 11.13 12.13 13.13 14.63 18.13 21.63 25.13 28.63 33.63 34.63 39.13 40.75 53.88 63.75
267
292
318
356
445
461
533
550
622
639
711
855
864
254
283
309
334
372
Center to
Top
7.25
8.00
8.75
9.75 12.00 13.25 16.00 18.00 20.75 23.13 24.63 27.88 31.50 39.25
mm
163
185
204
223
248
305
337
407
458
Weight
Flanged Ends
lbs.
50
55
84
119
185
298
459
783
1191 1764 1984 2446 3343 5733 6600
kg
23
25
36
54
84
135
207
353
536
794
588
893
994
1015 1346 1594
6.38
528
880
978
in.
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv).
728
838
mm
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. U.O.P specification includes sizes 2"-16".
3. Helium shell test performed on sizes up through 14".
36
12
in.
626
1036 1369 1619
709
801
997
1101 1505 2580 2994
UOP HF Acid Check Valves
Fig. No. 380R-HF8
ASME Class 300 Sizes 1½" - 30"
PARTS LIST
Test Pressure
ITEM DESCRIPTION
98
16
30
55
40
41
10
72
85
71
49
11
Shell Test................................ 1125 PSIG
Seat Test...................................825 PSIG
Helium Shell Test......................450 PSIG
MATERIAL
Bonnet Stud
Bonnet Stud Nut Bonnet Cap
Bonnet Gasket
Hinge
Hinge Pin
Body
Disc Nut
Disc Nut Washer Disc
Disc Nut Pin
Seat Ring Facing ASTM A193 GR. B7M
ASTM A194 GR. 2HM
ASTM A216 GR. WCB or A515 GR. 70
Soft Steel Ring
Monel®
Monel®
ASTM A216 GR. WCB
Monel®
Monel®
Monel®
Monel®
Monel®
98
16
30
55
41
40
72
85
**30" size has internal hinge bracket. Figure No. 384R-HF8.
49
71
11
10
K
A 1A 2
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim Description
1.5
2
2.5
3
4
6
8
10
12
14
16
18
20
24
30
A1
Face to Face
Flanged Ends
in.
9.50 10.50 11.50 12.50 14.00 17.50 21.00 24.50 28.00 33.00 34.00 38.50 40.00 53.00 62.75
mm
241
A2
Face to Face
RJT
in. 10.00 11.13 12.13 13.13 14.63 18.13 21.63 25.13 28.63 33.63 34.63 39.13 40.75 53.88 63.75
mm
254
283
309
334
372
K
Center to
Top
in.
6.38
7.00
7.37
8.00
8.87 11.37 13.25 15.25 18.00 19.25 20.87 22.25 22.87 33.25 39.25
mm
163
178
187
203
225
289
337
387
458
Weight
Flanged Ends
lbs.
50
65
87
110
160
331
510
784
1280 1490 2032 2446 2980 4840 6600
kg
23
29
39
50
73
150
231
356
581
267
292
318
356
445
461
533
550
622
639
711
728
838
855
489
676
864
880
530
922
978
994
565
1015 1346 1594
1036 1369 1619
581
845
997
1110 1352 2195 2994
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. U.O.P specification includes sizes 1½"-30".
3. Helium shell test performed on sizes up through 14".
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv).
37
Phillips HF Acid Gate Valves
Fig. No. 3354P-HF8 (-M35-1)
ASME Class 300 Sizes ½" - 2"
PARTS LIST
Test Pressure 3354P-HF8
Shell Test................................ 1125 PSIG
Seat Test...................................825 PSIG
Helium Shell Test......................500 PSIG
ITEM DESCRIPTION
Test Pressure 3354P-HF8 (-M35-1)
Shell Test................................ 1100 PSIG
Seat Test...................................800 PSIG
Helium Shell Test......................500 PSIG
54
50
54
50
56
31
56
31
52
36
59
52
36
16a
16a
35
46
46
59
49
98
16b
30
55
70
70
10
35
49
98
16b
30
55
10 Body
11 Seat Ring
16a Eyebolt Nut
16b Bonnet Stud Nut 30 Bonnet
31 Yoke Sleeve
35 Gland
36 Gland Flange 46 Packing
49 Eyebolt Pin
50 Handwheel
52 Eyebolt
54 Handwheel Nut 55 Bonnet Gasket 56 Jam Nut 59 Grease Fitting 70 Stem
71 Wedge
98 Bonnet Stud
MATERIAL
3354-HF8
ASTM A216 GR. WCB or
ASTM A105
Monel® 400
Carbon Steel
ASTM A194 GR. 2HM
ASTM A216 GR. WCB or
ASTM A105
12% Chrome
Monel® 400
Carbon Steel
PTFE
Carbon Steel
Malleable Iron
Carbon Steel
Carbon Steel
Monel® /PTFE Spiral Wound
Carbon Steel
Carbon Steel
K-Monel®
Monel® 400
ASTM A193 GR. B7M
3354P-HF8 (-M35-1)
ASTM A494 GR. M35-1
Monel® 400
Carbon Steel
ASTM A194 GR. 2HM
ASTM A494 GR. M35-1
12% Chrome
Monel® 400
Carbon Steel
PTFE
Carbon Steel
Malleable Iron
Carbon Steel
Carbon Steel
Monel® /PTFE Spiral Wound
Carbon Steel
Carbon Steel
K-Monel®
Monel® 400
ASTM A193 GR. B7M
10
71
71
11
11
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim Description
6.0
6.5
7.5
8.5
152
165
191
216
in.
9.5
10.5
11.75
14.75
16.13
mm
241
267
298
375
410
Center to Top in.
Closed
mm
8.75
9.63
10.63
13
15.75
222
245
270
330
400
in.
3.5
4.5
4.5
5.5
8
mm
89
114
114
140
203
lbs.
Weight
Flanged Ends kg
12
17
22
38
55
5.4
7.7
10
17.2
24.9
Center to
Top
Handwheel
Dia.
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. Phillips specification is for 2" size only.
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv).
38
2
5.5
K
A A2
1.5
140
M
M
1
in.
Face to Face
K&L
.75
mm
A1
L
.5
Phillips HF Acid Gate Valves
Fig. No. 3654P-HF8 (-M35-1)
ASME Class 600 Sizes ½" - 2"
Test Pressure
PARTS LIST
ITEM DESCRIPTION
10 Body
MATERIAL
3654P-HF8
ASTM A216 GR. WCB or
ASTM A105
Monel® 400
Carbon Steel
ASTM A194 GR. 2HM
ASTM A216 GR. WCB or
ASTM A105
12% Chrome
Monel® 400
Carbon Steel
PTFE
Carbon Steel
Malleable Iron
Carbon Steel
Carbon Steel
Monel® /PTFE Spiral Wound
Carbon Steel
Carbon Steel
K-Monel®
Monel® 400
ASTM A193 GR. B7M
11 Seat Ring
16a Eyebolt Nut
16b Bonnet Stud Nut 30 Bonnet
31 Yoke Sleeve
35 Gland
36 Gland Flange 46 Packing
49 Eyebolt Pin
50 Handwheel
52 Eyebolt
54 Handwheel Nut 55 Bonnet Gasket 56 Jam Nut 59 Grease Fitting 70 Stem
71 Wedge
98 Bonnet Stud
3654P-HF8 (-M35-1)
ASTM A494 GR. M35-1
Shell Test................................2250 PSIG
Seat Test.................................1650 PSIG
Helium Shell Test......................500 PSIG
Monel® 400
Carbon Steel
ASTM A194 GR. 2HM
ASTM A494 GR. M35-1
12% Chrome
Monel® 400
Carbon Steel
PTFE
Carbon Steel
Malleable Iron
Carbon Steel
Carbon Steel
Monel® /PTFE Spiral Wound
Carbon Steel
Carbon Steel
K-Monel®
Monel® 400
ASTM A193 GR. B7M
54
50
56
31
59
54
50 52
31 36
56 16a
59 35
49
16a 98
52 46
36
35 16b
30
49
55
98
16b
30
55
70
46
70
10
10
71
11
71
11
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim Description
1
1.5
2
in.
6.44
.5
.75
7.5
8.5
9.5
11.5
mm
164
191
216
241
292
A1
to Face
Face
K
Center
to
Top
in.
9.00
10.00
11.00
14.25
17.25
mm
229
254
280
362
439
Center
to Top
Closed
in.
8.13
9.00
9.69
12.44
15.00
mm
207
229
247
316
381
Handwheel
Dia.
in.
3.5
4.5
4.5
5.5
8
mm
89
114
114
140
203
L
M
Weight
Flanged
Ends
lbs.
13
18
24
42
64
kg
5.9
8.2
10.9
19.1
29.0
M
K&L
A A2
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. Phillips specification is for 2" size only.
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv).
39
Phillips HF Acid Gate Valves
Fig. No. 3655P-HF8 (-M35-1)
ASME Class 800 Sizes ½" - 2"
Test Pressure 3655P-HF8
PARTS LIST
Shell Test................................3000 PSIG
Seat Test.................................2200 PSIG
Helium Shell Test......................500 PSIG
MATERIAL
ITEM DESCRIPTION
3655P-HF8 (-M35-1)
ASTM A493 Gr. M35-1
10 Body
Shell Test................................3000 PSIG
Seat Test.................................2200 PSIG
Helium Shell Test......................500 PSIG
54
50
56
31
59
52
16a
36
35
49
30
98
Monel® 400
Carbon Steel
ASTM A194 GR. 2HM
ASTM A493 GR. M35-1
12% Chrome
Monel® 400
Carbon Steel
PTFE
Carbon Steel
Malleable Iron
Carbon Steel
Carbon Steel
Monel®/PTFE Spiral Wound
Carbon Steel
Carbon Steel
K-Monel®
Monel® 400
ASTM A193 GR. B7M
11 Seat Ring
16a Eyebolt Nut
16b Bonnet Stud Nut 30 Bonnet
31 Yoke Sleeve
35 Gland
36 Gland Flange 46 Packing
49 Eyebolt Pin
50 Handwheel
52 Eyebolt
54 Handwheel Nut 55 Bonnet Gasket 56 Jam Nut 59 Grease Fitting 70 Stem
71 Wedge
98 Bonnet Stud
Test Pressure 3655P-HF8 (-M35-1)
16b
46
55
70
10
71
11
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim Description
A1
Face to Face
K
M
Center to
Top
L
K&L
Center to Top
Closed
M
Handwheel
Dia.
A1
40
Weight
.5
in.
mm
in.
3.0
.75
3.5
1
1.5
4.13
4.75
2
5.25
76
89
105
121
133
9.00
10.00
11.00
14.25
17.25
mm
229
254
280
362
439
in.
8.13
9.00
9.69
12.44
15.00
mm
207
229
247
316
381
4
4.25
4.25
5.50
8
mm
102
108
108
140
203
lbs
7
9
14
24
39
3.2
4.1
6.4
10.9
17.7
in.
kg
Phillips HF Acid Gate Valves
Fig. No. 3655P-HF8
ASME Class 800 Sizes ½" - 2"
Test Pressure 3655P-HF8
PARTS LIST
Shell Test................................3000 PSIG
Seat Test.................................2200 PSIG
Helium Shell Test......................500 PSIG
MATERIAL
ITEM DESCRIPTION
3655P-HF8
10 Body
ASTM A216 GR. WCB or
11 Seat Ring
16a Eyebolt Nut
16b Bonnet Stud Nut 30 Bonnet
31 Yoke Sleeve
35 Gland
36 Gland Flange 46 Packing
49 Eyebolt Pin
50 Handwheel
52 Eyebolt
54 Handwheel Nut 55 Bonnet Gasket 56 Jam Nut 59 Grease Fitting 70 Stem
71 Wedge
98 Bonnet Stud
ASTM A105
Monel® 400
Carbon Steel
ASTM A194 GR. 2HM
ASTM A216 GR. WCB or
ASTM A105
12% Chrome
Monel® 400
Carbon Steel
PTFE
Carbon Steel
Malleable Iron
Carbon Steel
Carbon Steel
Monel®/PTFE Spiral Wound
Carbon Steel
Carbon Steel
K-Monel®
Monel® 400
ASTM A193 GR. B7M
Test Pressure 3655P-HF8 (-M35-1)
Shell Test................................3000 PSIG
Seat Test.................................2200 PSIG
Helium Shell Test......................500 PSIG
54
50
56
31
59
52
16a
36
35
49
30
98
16b
46
55
70
10
71
11
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim Description
A1
Face to Face
K
Center to
Top
mm
L
Center to Top
Closed
M
Handwheel
Dia.
Weight
.5
1
1.5
2
3.5
3.5
4.13
4.75
5.25
89
89
105
121
133
10.00
10.00
11.00
14.25
17.25
254
254
280
362
439
in.
9.00
9.00
9.69
12.44
15.00
mm
229
229
247
316
381
in.
4.25
4.25
4.25
5.50
8
mm
108
108
108
140
203
in.
.75
mm
in.
lbs
kg
9
9
14
24
39
4.1
4.1
6.4
10.9
17.7
M
K&L
A1
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. Phillips specification includes ½"-1" sizes only.
Related data
See Technical Data section for: Temperature/pressure data: Flow calculations (Cv).
41
Phillips HF Acid Gate Valves
Fig. No. 350P-HF8 (-M35-1)
ASME Class 300 Sizes 1½" - 36"
PARTS LIST
Test Pressure 350P-HF8
Shell Test................................ 1125 PSIG
Seat Test...................................825 PSIG
Helium Shell Test......................500 PSIG
Test Pressure 350P-HF8 (-M35-1)
Shell Test................................ 1100 PSIG
Seat Test...................................800 PSIG
Helium Shell Test......................500 PSIG
54
50
31
20
56
16a
36
35
52
49
MATERIAL
350P-HF8 350P-HF8-M35-1
10 Body
ASTM A216 GR. WCB
Monel® 400
ASTM A194 GR. 2HM
Carbon Steel
Alloy Steel
ASTM A216 GR. WCB
Alum. Brz. or 12% Chrome
Monel® 400
Monel® 400
Carbon Steel
John Crane 124
Carbon Steel
Malleable Steel
Carbon Steel
Carbon Steel
Monel®/PTFE Spiral Wound
Carbon Steel
Monel®
Monel® 400
ASTM A193 GR. B7M
ITEM DESCRIPTION
46
32
55
30
70
16b
98
11 16b 16a 20 30 31 32 35 36 46 49 50 52 54 55 56 70 71 98 Seat Ring
Bonnet Stud Nut
Eyebolt Nut
Bearings
Bonnet
Yoke Sleeve
Bonnet Stem Bushing Gland
Gland Flange
Packing
Eyebolt Pin
Handwheel
Eyebolt
Handwheel Nut
Bonnet Gasket
Jam Nut
Stem
Wedge
Bonnet Stud
ASTM A494 GR. M35-1
Monel® 400
ASTM A194 GR. 2HM
Carbon Steel
Alloy Steel
ASTM A494 GR. M35-1
Alum. Brz. or 12% Chrome
Monel® 400
Monel® 400
Carbon Steel
John Crane 124
Carbon Steel
Malleable Iron
Carbon Steel
Carbon Steel
Monel®/PTFE Spiral Wound
Carbon Steel
Monel®
Monel® 400
ASTM A193 GR. B7M
Body
Body
Figure No. 350PX-HF8 includes screwed in seat
ring with threaded area of body, undercut andMonel
Monel
Inlay
Inlay
inlaid with Monel® 400.
71
Seat Ring
Seat Ring
11
Figure No. 350PL (2) HF8 includes a Monel®
sleeve that lines the stuffing box.
10
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim
Description
M
A1
M
A2
Face to Face
Flanged Ends
Face to Face
RJT
K&L
K&L
K
L
A 1 A2
A 1 A2
M
Center to Top
open
Center to Top
Closed
Handwheel
Dia.
Weight
Flanged Ends
1.5
2
in.
7.5
8.5
9.5 11.13 12.0 15.88 16.5 18.0 19.75 30.0 33.0 36.0 39.0 45.0 55.0 68.0
mm
191
216
241
in.
8.0
9.13 10.13 11.75 12.63 16.5 17.13 18.63 20.38 30.63 33.63 36.63 39.63 45.88 56.0 69.13
mm
203
232
2.5
257
3
283
299
4
305
321
6
403
419
8
419
435
10
457
473
12
502
518
14
762
778
16
838
854
18
914
20
24
30
991 1143 1397 1727
930 1007 1165 1422 1756
in. 17.38 17.75 19.31 19.31 28.13 36.13 43.88 51.06 57.81 66.31 72.25 79.06 88.38 102.4 138.0 156.0
mm
442
451
491
491
715
918 1115 1297 1468 1684 1835 2008 2245 2602 3505 3962
in. 15.19 15.38 16.06 16.06 23.44 29.25 34.75 40.25 44.94 52.13 56.38 61.31 68.50 78.25 108.0 121.0
mm
386
391
408
408
595
743
883 1022 1141 1324 1432 1557 1740 1988 2743 3073
in.
10
10
10
10
14
18
24
24
24
24
28
28
28
34
34
34
mm
254
254
254
254
356
457
610
610
610
610
711
711
711
864
864
864
lbs.
67
70
126
135
215
386
654
998 1317 1915 2608 3319 4278 7529 1081715300
kg
30
32
57
61
98
175
297
453
597
868 1182 1504 1938 3411 4907 6940
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. Phillips specification includes 2"-36" sizes only.
3. Helium shell test performed on sizes up through 14".
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv).
See Actuators & Accessories section for: Bevel gear, spur gear, chain wheel, motor or cylinder actuators; Bypasses, drains or auxiliary piping; Special packing, etc.
42
36
Phillips HF Acid Gate Valves
Fig. No. 350P-HF8-BTT (-M35-1)
ASME Class 300 Sizes 1½" - 36"
PARTS LIST
Test Pressure 350P-HF8
ITEM DESCRIPTION
MATERIAL
350P-HF8-BTT 350P-HF8-BTT (-M35-1)
10 11 16b 16a 20 30 31 32 35 36 46 49 50 52 54 55 56 70 71 98 123
19
12
ASTM A216 GR. WCB
Monel® 400
ASTM A194 GR. 2HM
Carbon Steel
Alloy Steel
ASTM A216 GR. WCB
Alum. Brz. or 12% Chrome
Monel® 400
Monel® 400
Carbon Steel
John Crane 124
Carbon Steel
Malleable Steel
Carbon Steel
Carbon Steel
Monel®/PTFE Spiral Wound
Carbon Steel
Monel®
Monel® 400
ASTM A193 GR. B7M
Monel®
K-Monel® 500
PTFE
Body
Seat Ring
Bonnet Stud Nut
Eyebolt Nut
Bearings
Bonnet
Yoke Sleeve
Bonnet Stem Bushing Gland
Gland Flange
Packing
Eyebolt Pin
Handwheel
Eyebolt
Handwheel Nut
Bonnet Gasket
Jam Nut
Stem
Wedge
Bonnet Stud
Compression Ring
Cap Screw
Insert
ASTM A494 GR. M35-1
Monel® 400
ASTM A194 GR. 2HM
Carbon Steel
Alloy Steel
ASTM A494 GR. M35-1
Alum. Brz. or 12% Chrome
Monel® 400
Monel® 400
Carbon Steel
John Crane 124
Carbon Steel
Malleable Iron
Carbon Steel
Carbon Steel
Monel®/PTFE Spiral Wound
Carbon Steel
Monel®
Monel® 400
ASTM A193 GR. B7M
Monel®
K-Monel® 500
Body
PTFE
Figure No. 350PX-HF8 includes screwed in seat ring with
threaded area of body, undercut and inlaid with Monel® 400.
19
12
10
Shell Test................................ 1100 PSIG
Seat Test...................................800 PSIG
Helium Shell Test......................500 PSIG
54
50
31
20
56
16a
36
35
52
49
46
32
55
30
70
16b
Seat Ring
Monel Inlay
123
Test Pressure 350P-HF8 (-M35-1)
98
Body
Monel Inlay
123
Shell Test................................ 1125 PSIG
Seat Test...................................825 PSIG
Helium Shell Test......................500 PSIG
19
12
10
71
Seat Ring
11
10
Detail A
Detail A
Figure No. 350PL (2) HF8 includes a
Monel® sleeve that lines the stuffing box.
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim
Description
1.5
2
in.
7.5
8.5
9.5 11.13 12.0 15.88 16.5 18.0 19.75 30.0 33.0 36.0 39.0 45.0 55.0 68.0M
mm
191
216
241
2.5
3
4
6
8
10
12
14
16
18
20
24
30
36
A1
Face to Face
Flanged Ends
A2
Face to Face
RJT
in.
8.0
9.13 10.13 11.75 12.63 16.5 17.13 18.63 20.38 30.63 33.63 36.63 39.63 45.88 56.0 69.13
mm
203
232
K
Center to Top
open
in. 17.38 17.75 19.31 19.31 28.13 36.13 43.88 51.06 57.81 66.31 72.25 79.06 88.38 102.4 138.0 156.0
L
Center to Top
Closed
in. 15.19 15.38 16.06 16.06 23.44 29.25 34.75 40.25 44.94 52.13 56.38 61.31 68.50 78.25 108.0 121.0
M
mm
442
451
257
491
283
299
491
305
321
715
403
419
419
435
457
473
502
518
762
778
838
854
914
M
991 1143 1397 1727
930 1007 1165 1422 1756
K&L
K&L
918 1115 1297 1468 1684 1835 2008 2245 2602 3505 3962
mm
386
391
408
408
595
743
A 1 A2
883 1022 1141 1324 1432 1557 1740 1988 2743 3073
Handwheel
Dia.
in.
10
10
10
10
14
18
24
24
24
24
28
28
28
34
34
34
mm
254
254
254
254
356
457
610
610
610
610
711
711
711
864
864
864
Weight
Flanged Ends
lbs.
67
70
126
135
215
386
654
998 1317 1915 2608 3319 4278 7529 1081715300
kg
30
32
57
61
98
175
297
453
597
A 1 A2
868 1182 1504 1938 3411 4907 6940
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. Phillips specification includes 2"-36" sizes only.
3. Helium shell test performed on sizes up through 14".
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv).
See Actuators & Accessories section for: Bevel gear, spur gear, chain wheel, motor or cylinder actuators; Bypasses, drains or auxiliary piping; Special packing, etc.
43
Fig. No. 3367P-HF8
Phillips HF Acid Globe Valves
ASME Class 300 Sizes ½" - 2"
Test Pressure
PARTS LIST
Shell Test................................ 1125 PSIG
Seat Test...................................825 PSIG
Helium Shell Test......................500 PSIG
54
50
31
52
36
16a
70
49
16b
46
98
35
30
55
10
71
11
72
113
ITEM
DESCRIPTION
MATERIAL
ASTM A216 GR. WCB
Monel® 400
Carbon Steel
ASTM A194 GR. 2HM
ASTM A216 GR. WCB
12% Chrome
Monel® 400
Carbon Steel
PTFE
Carbon Steel
Malleable Iron
Carbon Steel
Carbon Steel
Monel®/PTFE Spiral Wound
K-Monel®
Monel® 400
Monel® 400
K-Monel®
ASTM A193 GR. B7M
10 Body
11 Seat Ring
16a Eyebolt Nut
16b Bonnet Stud Nut 30 Bonnet
31 Yoke Sleeve
35 Gland
36 Gland Flange 46 Packing
49 Eyebolt Pin
50 Handwheel
52 Eyebolt
54 Handwheel Nut 55 Bonnet Gasket 70 Stem
71 Disc
72 Disc Nut
113 Thrust Plate
98 Bonnet Stud
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim A1
M
K
K&L
L
M
A1
Description
in.
Face to Face
Flanged End mm
.75
6.0
7.0
8.0
9.0
10.5
152
178
203
229
267
1.5
2
in.
8.13
9.0
9.63
13.75
14.13
206
229
244
350
359
in.
Center to Top
Closed
mm
7.38
8.63
8.88
12.13
12.88
187
219
225
308
327
in.
Handwheel
Dia.
mm
3.5
4.5
4.5
8
8
89
114
114
203
203
Weight
Flanged Ends lbs.
10
15
22
44
63
kg
4.5
6.8
10.0
20.0
28.6
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. Phillips specification includes 2" size only.
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv).
44
1
mm
Center to
Top
.5
Phillips HF Acid Globe Valves
Fig. No. 3667P-HF8
ASME Class 600 Sizes ½" - 2"
PARTS LIST
Test Pressure
ITEM DESCRIPTION
10 Body
11 Seat Ring
16a Eyebolt Nut
16b Bonnet Stud Nut 30 Bonnet
31 Yoke Sleeve
35 Gland
36 Gland Flange 46 Packing
49 Eyebolt Pin
50 Handwheel
52 Eyebolt
54 Handwheel Nut 55 Bonnet Gasket 70 Stem
71 Disc
72 Disc Nut
113 Thrust Plate
98 Bonnet Stud
Shell Test................................2250 PSIG
Seat Test.................................1650 PSIG
Helium Shell Test......................500 PSIG
MATERIAL
ASTM A216 GR. WCB or ASTM A105
Monel® 400
Carbon Steel
ASTM A194 GR. 2HM
ASTM A216 GR. WCB or ASTM A105
12% Chrome or Aluminum Bronze
Monel® 400
Carbon Steel
PTFE
Carbon Steel
Malleable Iron
Carbon Steel
Carbon Steel
Monel®/PTFE Spiral Wound
K-Monel®
Monel® 400
Monel® 400
K-Monel®
ASTM A193 GR. B7M
54
50
31
52
36
16a
70
49
16b
46
98
35
30
55
10
71
11
72
113
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim A1
Description
.5
.75
1
1.25
1.5
2
in.
6.5
7.25
8.5
9.0
9.5
11.5
mm
165
184
216
229
241
292
Face to Face Flanged End
in.
7.25
9
9.38
11.5
12.13
15.25
mm
184
229
238
292
308
388
L
Center to Top in.
Closed
mm
6.88
8.38
8.88
10.88
11.25
13.25
175
213
226
276
286
337
M
Handwheel in.
Dia.
mm
K
Center to
Top
Weight
Flanged Ends
3
3.75
4.5
7
7
8
76
95
114
178
178
203
lbs
12
18
23
39
49
66
kg
5
8
10
18
22
30
M
K&L
A1
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. Phillips specification includes 2" size only.
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv).
45
Phillips HF Acid Globe Valves
Fig. No. 3668P-HF8 (-M35-1)
ASME Class 800 Sizes ½" - 2"
PARTS LIST
Test Pressure 3668P-HF8
Shell Test................................3000 PSIG
Seat Test.................................2200 PSIG
Helium Shell Test......................500 PSIG
ITEM DESCRIPTION
10 Body
11 Seat Ring
16a Eyebolt Nut
16b Bonnet Stud Nut 30 Bonnet
31 Yoke Sleeve
35 Gland
36 Gland Flange 46 Packing
49 Eyebolt Pin
50 Handwheel
52 Eyebolt
54 Handwheel Nut 55 Bonnet Gasket 70 Stem
71 Disc
72 Disc Nut
113 Thrust Plate
98 Bonnet Stud
Test Pressure 3668P-HF8 (-M35-1)
Shell Test................................3000 PSIG
Seat Test.................................2200 PSIG
Helium Shell Test......................500 PSIG
54
50
31
52
16a
36
35
49
46
98
16b
30
MATERIAL
3668P-HF8
3668P-HF8 (-M35-1)
ASTM A216 GR. WCB
ASTM A494 GR. M35-1
or ASTM A105
Monel® 400
Monel® 400
Carbon Steel
Carbon Steel
ASTM A194 GR. 2HM
ASTM A194 GR. 2HM
ASTM A216 GR. WCB
ASTM A494 GR. M35-1
or ASTM A105
12% Chrome
12% Chrome
Monel® 400
Monel® 400
Carbon Steel
Carbon Steel
PTFE
PTFE
Carbon Steel
Carbon Steel
Malleable Iron
Malleable Iron
Carbon Steel
Carbon Steel
Carbon Steel
Carbon Steel
Monel®/PTFE Spiral Wound
Monel®/PTFE Spiral Wound
K-Monel®
K-Monel®
Monel® 400
Monel® 400
®
Monel® 400
Monel 400
K-Monel®
K-Monel®
ASTM A193 GR. B7M
ASTM A193 GR. B7M
70
55
10
72
71
113
11
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
M
Dim A1
K
Description
A1
M
1
1.25
1.5
2
3.63
4.5
5.13
6.25
7.0
8.38
mm
92
114
130
159
178
213
in.
7.50
8.63
9.50
11.75
13.13
14.25
mm
191
220
242
299
334
362
Center to Top
Closed
in.
7.00
8.38
8.88
11.25
12.13
13.00
mm
178
213
226
286
309
331
in.
3.5
4.5
4.5
8
8
8
mm
89
114
114
203
203
203
lbs
6
9
13
26
30
49
kg
2.7
4.1
5.9
11.8
13.6
22.2
Center to
Top
Handwheel
Dia.
Weight
Flanged Ends Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. Phillips specification includes 1" size only.
Related data
See Technical Data section for: Temperature/pressure data; Flow calculations (Cv).
46
.75
Face to Face
Flanged End K&L
L
in.
.5
Phillips HF Acid Globe Valves
Fig. No. 3668P-HF8T (-M35-1)
ASME Class 800 Sizes ½" - 2"
PARTS LIST
Test Pressure 3668P-HF8T
Shell Test................................3000 PSIG
Seat Test.................................2200 PSIG
Helium shell Test.......................500 PSIG
MATERIAL
3668P-HF8T
3668P-HF8T (-M35-1)
ASTM A216 GR. WCB
ASTM A494 GR. M35-1
or ASTM A105
Monel® 400
Monel® 400
Carbon Steel
Carbon Steel
ASTM A194 GR. 2HM
ASTM A194 GR. 2HM
ASTM A216 GR. WCB
ASTM A494 GR. M35-1
or ASTM A105
12% Chrome
12% Chrome
Monel® 400
Monel® 400
Carbon Steel
Carbon Steel
PTFE
PTFE
Carbon Steel
Carbon Steel
Malleable Iron
Malleable Iron
Carbon Steel
Carbon Steel
Carbon Steel
Carbon Steel
Monel®/PTFE Spiral Wound
Monel®/PTFE Spiral Wound
K-Monel®
K-Monel®
Monel® 400/PTFE Insert
Monel® 400/PTFE Insert
Monel® 400
Monel® 400
K-Monel®
K-Monel®
ASTM A193 GR. B7M
ASTM A193 GR. B7M
ITEM DESCRIPTION
10 Body
11 Seat Ring
16a Eyebolt Nut
16b Bonnet Stud Nut 30 Bonnet
31 Yoke Sleeve
35 Gland
36 Gland Flange 46 Packing
49 Eyebolt Pin
50 Handwheel
52 Eyebolt
54 Handwheel Nut 55 Bonnet Gasket 70 Stem
71 Disc
72 Disc Nut
113 Thrust Plate
98 Bonnet Stud
Test Pressure 3668P-HF8T (-M35-1)
Shell Test................................3000 PSIG
Seat Test.................................2200 PSIG
Helium Shell Test......................500 PSIG
54
50
31
52
16a
36
35
49
46
98
16b
30
70
55
10
72
71
113
11
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim Description
A1
K
L
M
in.
.5
3.63
.75
4.5
1
5.13
1.25
6.25
1.5
7.0
2
8.38
Face to Face
Screwed End mm
92
114
130
159
178
213
in.
7.50
8.63
9.50
11.75
13.13
14.25
Center to Top
Open
mm
191
220
242
299
334
362
Center to Top
Closed
in.
7.00
8.38
8.88
11.25
12.13
13.00
mm
178
213
226
286
309
331
in.
3.5
4.5
4.5
8
8
8
mm
89
114
114
203
203
203
lbs
6
9
13
26
30
49
kg
2.7
4.1
5.9
11.8
13.6
22.2
Handwheel
Dia.
Weight
M
K&L
A1
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. Phillips specification includes ¾" size only.
Related data
See Technical Data section for: Temperature/pressure data: Flow calculations (Cv).
47
Fig. No. 360P-HF8
Phillips HF Acid Globe Valves
ASME Class 300 Sizes 1½" - 12"
PARTS LIST
Test Pressure
Shell Test................................ 1125 PSIG
Seat Test...................................825 PSIG
Helium Shell Test......................500 PSIG
54
50
31
ITEM DESCRIPTION
54 Handwheel Nut
50 Handwheel
36 Gland Flange
35 Gland
46 Packing
98 Bonnet Stud
16b Bonnet Stud Nut
30 Bonnet
55 Bonnet Gasket
32 Bonnet Stem Bushing 70 Stem
72 Disc Nut
71 Disc
11 Seat Ring
10 Body
31 Yoke Sleeve
52 Eyebolt
16a Eyebolt Nut
49 Eyebolt Pin
85 Handwheel Washer 113 Thrust Plate
85
52
36
35
16a
49
70
98
46
16b
30
32
55
72
71
11
113
MATERIAL
Carbon Steel
Ductile Iron
Carbon Steel
Monel® 400
John Crane 124
ASTM A193 GR. B7M
ASTM A194 GR. 2HM
ASTM A216 GR. WCB
Monel®/PTFE Spiral Wound
Monel®
Monel®
Monel® 400
Monel® 400
Monel® 400
ASTM A216 GR. WCB
Aluminum Bronze or 12% chrome
Carbon Steel
Carbon Steel
Carbon Steel
12% Chrome
K-Monel®
Figure No. 360PX-HF8 includes screwed in seat
ring with threaded area of body, undercut and
inlaid with Monel® 400.
10
Monel Inlay
Body
Seat
Ring
Monel
Inlay
Body
Seat Ring
DIMENSIONS and WEIGHTS
VALVE SIZE (inches)
Dim M
M
A1
Face to Face
Flanged Ends
A2
Face to Face
RJT
K
Center to Top
Open
L
Center to Top
Closed
M
Handwheel
Dia.
K&L
K&L
A1 A 2
A1 A 2
Description
Weight
Flanged Ends
2.5
3
4
6
8
10
12
in.
9.00
1.5
10.50
2
11.50
12.50
14.00
17.50
22.00
24.50
28.00
mm
229
267
292
318
356
445
559
622
711
in.
9.50
11.13
12.13
13.13
14.63
18.13
22.63
25.13
28.63
mm
241
283
308
333
371
460
575
638
727
in.
15.63
18.25
20.00
20.75
24.87
28.75
31.37
34.37
48.00
mm
397
464
508
527
632
730
797
873
1219
in.
14.38
17.12
18.75
18.87
22.87
25.87
28.50
31.50
45.00
mm
365
435
476
479
581
657
724
800
1143
in.
8
8
10
10
14
18
18
34
34
mm
203
203
254
254
356
457
457
864
864
lbs
60
79
104
137
224
388
635
1258
1698
kg
27
36
47
62
102
176
288
571
770
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. Phillips specification includes 2"-12" sizes.
3. 8" and above have hammerblow handwheels as a standard.
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv).
48
Phillips HF Acid Check Valves
Fig. No. 3681P-HF8 (-M35-1)
ASME Class 800 Sizes ½" - 2"
Test Pressure 3681P-HF8
PARTS LIST
DESCRIPTION
ITEM
MATERIAL
3681P-HF8
3681P-HF8 (-M35-1)
98
Bonnet Stud
16 Bonnet Stud Nut
30 Bonnet Cap
55 Bonnet Gasket 71 Disc
10 Body
11 Seat Ring
ASTM A193 GR. B7M
ASTM A194 GR 2HM
ASTM A493 GR. WCB
or ASTM A515 GR. 70
Monel®/PTFE Spiral Wound
Monel® 400
ASTM A216 GR. WCB
or ASTM A105
Monel® 400
ASTM A193 GR. B7M
ASTM A194 GR 2HM
ASTM A493 GR. M35-1
Monel®/PTFE Spiral Wound
Monel® 400
ASTM A493 GR. M35-1
Shell Test................................3000 PSIG
Seat Test.................................2200 PSIG
Helium Shell Test......................500 PSIG
Test Pressure 3681P-HF8 (-M35-1)
Shell Test................................3000 PSIG
Seat Test.................................2200 PSIG
Helium Shell Test......................500 PSIG
Monel® 400
9898
1616
3030
5555
7171
1010
1111
DIMENSIONS and WEIGHTS
Dim Description
A1
Face to Face
Screwed End Center to Top
Weight
VALVE SIZE (inches)
.75
1
1.5
2
in.
3.63
4.5
5.13
7.0
8.38
mm
92
114
130
178
213
in.
2.5
3.0
3.38
5.0
5.5
mm
64
76
87
127
140
lbs
3
6
9
17
35
kg
1.4
2.7
4.1
9.1
15.9
K
.5
K K
A 1A 1
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. Phillips specification includes ¾"-1" sizes.
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv).
49
Phillips HF Acid Check Valves
Fig. No. 380P-HF8 (-M35-1)
ASME Class 300 Sizes 1½" - 30"
Test Pressure
Shell Test................................ 1125 PSIG
Seat Test...................................825 PSIG
Helium Shell Test......................500 PSIG
PARTS LIST
MATERIAL
ITEM
DESCRIPTION
380P-HF8
98 Bonnet Stud
16 Bonnet Stud Nut 30 Bonnet Cap
55 Bonnet Gasket 41 Hinge Pin
40 Hinge
10 Body
72 Disc Nut
85 Disc Nut Washer 71 Disc
49 Disc Nut Pin 12 Seat Ring
44 Pipe Plugs
ASTM A193 GR. B7M
ASTM A194 GR. 2HM
ASTM A216 GR. WCB or A515 GR. 70
Monel®/PTFE Spiral Wound
K-Monel®
Monel® 400
ASTM A216 GR. WCB
Monel® 400
Monel® 400
Monel® 400
Monel® 400
Monel® 400
Carbon Steel
ASTM A193 GR. B7M
ASTM A194 GR. 2HM
ASTM A494 GR. M35-1
Monel®/PTFE Spiral Wound
K-Monel®
ASTM A494 GR. M35-1
Monel® 400
Monel® 400
ASTM A494 GR. M35-1
Monel® 400
Monel® 400
Monel® 400
98
44
30
55
44
30
41 55
40
71
49 41
40
12 71
49
10
380P-HF8 (-M35-1)
44
30
55
16
98 98
Figure No. 380PX-HF8 includes screwed in seat
ring with threaded area of body, undercut and
inlaid with Monel® 400.
Body
16 16
85
72
41
40
71
49
Monel Inlay
85 85
72 72
BodyBody
Seat Ring
Monel
InlayInlay
Monel
12 12
SeatSeat
RingRing
10 10
DIMENSIONS and WEIGHTS
Dim Description
in.
K
K
A 1 A2
A 1 A 2A 1 A 2
A1
Face to Face
Flanged Ends mm
A2
Face to Face
RJT
K
Center to Top
K
VALVE SIZE (inches)
1.5
2
2.5
3
4
6
8
12
14
16
18
20
24
30 9.50 10.50 11.50 12.50 14.00 17.50 21.00 24.50 28.00 33.00 34.00 38.50 40.00 53.00 62.75
241
267
292
318
356
445
533
622
711
838
864
978 1015 1346 1594
in. 10.00 11.13 12.13 13.13 14.63 18.13 21.63 25.13 28.63 33.63 34.63 39.13 40.75 53.88 63.75
mm
254
282
308
333
372
460
549
in.
6.38 7.00 7.37 8.00 8.87 11.37 13.25 15.25 18.00 19.25 20.87 22.25 22.87 33.25 39.25
mm
163
178
187
203
225
289
337
387
lbs
Weight
Flanged Ends kg
50
65
87
110
160
331
510
784 1280 1490 2032 2446 2980 4840 6600
23
29
39
50
73
150
231
356
Notes:
1. This data is not to be used for construction unless confirmed by the factory.
2. Phillips specification includes 2"-24" sizes.
3. Helium shell test performed on sizes up through 14".
Related data
See Technical Data section for: Temperature/pressure data: Raised face or ring joint flanges; Flow calculations (Cv).
50
10
638
727
458
581
854
489
676
880
530
994 1035 1368 1619
565
581
845
997
922 1110 1352 2195 2994
HF Acid Valves
Figure Number System
How To Order And Specify
The following is an example of a Pacific figure number. The fields have been numbered and are explained in the corresponding sections.
1
12"
2
3
350 W( )
Valve
Fig.
Size
No.
4
5
6
7
8
9
HF8
BTT
LCB
RJ
BG
X
Special
Trim
Feature
Designations
Suffix
Special
Trim
Suffix
1) Nominal Valve Size
Same as the nominal size of the pipe into which the valve will be installed.
This number represents the ASME class and type of valve desired.
Special features can be identified by this letter suffix. The most popular
features are:
A(1) Single seal welded seat ring(s) and bonnet stem bushing
A(2) Double seal welded seat ring(s) and bonnet stem bushing
C Chevron Specifications (specific to HF8 valves)
D Threaded seat ring(s)
E Spiral wound bonnet gasket
G Grease injector with lantern ring
8)
I Graphite stem packing and bonnet gasket
J Standard single valve by-pass as defined by the Pacific Valves catalog
K Vent in upstream side of wedge
L or L(1)Lantern ring and pipe plug in stuffing box
L(2) Sleeve and bonnet stem bushing in stuffing box
M K-Monel® body/bonnet bolting
P Phillips Specifications (specific to HF8 valves)
R Ring joint body/bonnet flange gasket
T PTFE stem packing and bonnet gasket
U( ) Drill, tap and plug - Location specified within the parentheses ()
W( ) Bleed valve as defined by the Pacific Valves catalog or UOP
Specification for HF8 valves-Location specified within the parentheses ()
X Monel® inlay in seat ring threaded area
9)
Z Valve assigned to “Z” sales order. (Usually designates N.D.E.)
4) Trim Designation
HF8 Monel® trim parts for hydrofluoric alkylation service.
HF8T Monel® trim parts w/PTFE disc insert for globe valves and
PTFE seat ring insert for gate and check valves for H. F. service.
5) Special Trim Suffix
T PTFE insert in seat or wedge/disc facing
BTT PTFE “High Integrity Shut Off” Wedge
6) Material Suffix
Body/bonnet material desired. Leave blank for carbon steel. Use suffix for
other alloys.
Other
Special
Options
7) End Connections Suffix
2) Basic Valve Figure Number
3) Special Feature Suffix
Body &
End
Actuator
Bonnet
Connections
Suffix
Material
RJ Ring joint type flanged ends
FF Flat faced flanged ends
N1( ) Nipple extension on one (1) end only-length of extension is defined within the parentheses ().
N2( ) Nipple extension on both ends-length of extension is defined within the parentheses().
SF( ) Smooth face-when requirement is other than 125 to 200 RA, the
maximum will be defined within the parentheses (). No designation
is required, if Pacific Valves standard is used.
RF( ) Raised face-when requirement is other than B16.5, it will be defined within the parentheses (). No designation is required if the require-
ment is Pacific's standard. Contact Pacific Valves for clarification.
Actuator Suffix
A Hydraulic cylinder actuator
BG Bevel gear actuator
C Pneumatic cylinder actuator (fail as is)
CC Pneumatic cylinder actuator (fail close)
CO Pneumatic cylinder actuator (fail open)
D( ) Chainwheel with amount of chain as defined within the parentheses () in feet.
E Electric motor actuator
HB Hammer blow handwheel
MTG Valve to be suitable to mount a specific actuator by the customer. Details of the operator must be specified on the sales order or shop job instructions.
Other Special Options
T he Refinery Specifications will replace the need for a special feature suffix or an “X” for special options/adders as defined by the customer specifications. The “P” used within Section 3 of the figure number must still be used, when applicable, to specify a valve
built to the “Phillips' License Spec”.
X An “X” will be defined in the special notes or the sales order or shop job instructions.
AMO Amoco- Locations: Texas City, TX Mandan, MD Chicago, IL
BPW B.P. Oil- Ferndale, WA
EBM Exxon USA-Billings, MT (Spec. pkg & gasket only)
EXB Exxon USA-Billings, MT (added new model spacer ring)
EXB4Exxon USA-Billings, MT (Rev. 4 of Exxon spec)
EXB5Exxon USA-Billings, MT (Rev. 5 of Exxon spec)
MOB Mobile Oil-All locations in USA (except Torrance)
MOC Mobile Oil-Coryton Refinery, UK
MOT Mobile Oil-Torrance, CA
PPC Phillips Petroleum-Borger, TX
51
CRANE Energy Global Headquarters
19241 David Memorial Drive, Suite 150
Shenandoah, Texas 77385
Tel: +1-936-271-6500
Fax: +1-936-271-6510
HF Acid Customer Service
3201 Walnut Avenue
Singnal Hill, California 90755
Tel: +1-562-426-2531
Fax: +1-562-595-9717
www.craneenergy.com
CRANE Energy Flow Solutions®
brands you know...technology you want...solutions you need
Ball, Check, Corrosion Resistant Gate and Globe Valves
Valve System Solutions, Highly Engineered Specialty Valves
Lined Check and Resilient Seated Butterfly Valves
Nozzle-Type, Severe Service Check Valves
Ball, Bronze, Butterfly, Cast Steel, and Iron Valves
High Pressure and Severe Service Valves
PACIFIC VALVES
®
High Performance Wafer Check Valves
Ball, Bronze, Butterfly, Cast Steel, and Iron Valves
High Performance Butterfly and Metal Seated Valves
Cast Steel Valves
Ball, Bronze, Butterfly, Cast Steel, and Iron Valves
Certified Valve Repair Services
Aloyco, Center Line, Compac-Noz, Crane, Duo-Chek, Flowseal, Jenkins, Krombach, Noz-Chek, Pacific,
Stockham, Triangle, and Uni-Chek are all trademarks of Crane Co. ©2010
EG-PC-CT-EN-L11-13-1004 (CV-401)

Similar documents

Stockham Iron Valves

Stockham Iron Valves or vertical line with upward flow. Angle valves are for "horizontaldownward" or "upward-horizontal" flow. • These valves will perform the four following important functions: 1. Act as an automat...

More information