- Adapt Formwork

MK SYSTEM
Manifold configurations with a standard system
IMPORTANT:
Any safety provisions as directed by the appropriate governing
agencies must be observed when using our products.
The pictures in this document are snapshots of situations at
different stages of assembly, and therefore are not complete
images. For the purpose of safety, they should not be deemed
as definitive.
All instructions regarding safety and operations contained
in this document, and the data on stress and loads must be
respected. ULMA Construcción’s Technical Department must
be consulted any time that field changes alter our equipment
installation drawings.
The loads featured in this document, related to the basic parts
of the product, are approximate.
Our equipment is designed to work with accessories and parts
produced by our company only. Combining such equipment
with other brands is not only dangerous without having made
all corresponding verifications, it also voids any or all our
warranties.
The company reserves the right to introduce any modifications
deemed necessary for the technical development of the
product.
All rights reserved.
Neither the whole nor any part of this document may be
reproduced or transmitted in any form or by any means
(electronic or mechanical), including photocopy, recording
or any other form of information storage or retrieval system
without the permission of ULMA Construcción.
© Copyright by ULMA C y E, S. Coop
MK SYSTEM
5
6
20
27
Product description
Applications
System components and accessories
ULMA Construcción in the World
4
MK SYSTEM
u
u
u
u
u
u
u
u
u
u
5
MK SYSTEM
Applications
MK Structures
All those structure which require high load capacity can be
configured by connecting MK walers.
The combination of the MK Structure system with other shoring
and traveller systems increases the number of possible solutions:
MK TRUSS
u
Powerful shoring for special buildings
u
Construction of upper slab and wings of steel -concrete composite bridge
u
u
Support structure for ENKOFORM HMK formwork in large span
applications. It is easy to adapt to and to reinforce according to the
particular building site requirements.
Deck flange form carrier in concrete bridge
MK Truss shoring up bridge
MK FORM CARRIERS
Deck flange form carrier
Instead of a customised structure for steel-concrete composite
bridge decks, the standard solution offered by MK Form Carrier
increases the cost-effectiveness of projects.
The forward-moving of the form carrier is easy with the pull or
push auxiliary devices recommended by ULMA.
6
MK SYSTEM
Parapet form carrier
Light form carrier which can be moved manually. It is used
for applications with lower load-bearing and forward-moving
requirements. It only requires a solid base where to rest the
guide rail on.
Construction of bridge with balanced cantilevers
u
u
Parapet form carrier in between two bridge decks
u
u
This system is the appropriate for the construction of bridge
protection parapets.
Example of parapet form carrier
CVS Cantilever carriage
u
The MK System in its configuration of a cantilever form carriage
eases the construction of pier segments with balanced cantilevers
as well as straight or curved decks of constant or variable section,
and bridge arches.
7
MK SYSTEM
Vertical formwork carrier
Vertical formwork carrier for double-sided walls
u
u
By fixing the formwork onto this carrier, it eases and simplifies
the formwork erection and stripping works and the travel of the
formwork to the next pouring stage in the construction of singleor double-sided concrete walls.
Vertical formwork carrier for single-sided walls
Tunnel form carrier
8
Any required geometry is formed with the available standard items
u
u
The solution with the MK System for tunnels can be considered
another type of form carrier adapted to the particular
requirements of tunnel construction. It effectively combines the
shoring and the form-giving of the formwork which has to adapt
to the vault shape of the tunnel.
Cut-and-cover tunnel with electric rolling system
MK SYSTEM
Formwork systems
ENKOFORM HMK
With beams and standard walers, the horizontal formwork
ENKOFORM HMK allows adapting to the varied shapes of
concrete structures in civil engineering.
With this system, it is possible to form the varied sections
of bridge decks, overpasses and underpasses, and any other
application that requires high load capacity.
Slabs of great thickness
u
Underpasses
u
Pier caps
u
Pier segments
System benefits
Combination of ENKOFORM HMK and T-60 Shoring
ENKOFORM HMK in pier caps and bridge decks
u
u
ENKOFORM HMK in the construction of a bridge deck
u
Bridge sections, viaducts, overpasses and
other, with constant or variable section in
width and depth
u
u
u
Typology of works with ENKOFORM HMK:
The connector design enables perfect adjustment and
adaptation to the different sections of:
Bridges of constant or variable section, both solid and
hollow
Bridges of variable deck depth, solid or hollow
Bridges with superelevation
Rigid structure for handling and transport.
Fast stripping by modules or formwork units.
Easy jointing of walers and timber beams.
9
MK SYSTEM
ENKOFORM VMK
It provides great performance and excellent finishes as
vertical formwork in any application of building construction
and civil works: walls, columns, abutments and piers.
In accordance to the requirements of each project, it is possible to
make customised panels consisting of steel walers, timber beams
and phenol faced plywood.
System benefits
It provides excellent finishes capable of suiting the
requirements of surface designs predefined by the architect.
Reduced transport volume if the material is delivered
dismantled to the building site.
The formwork can be optimised according to the defined
concrete pressure.
Panel joints are simple and adjustable. The requirement
for filling elements is minimal.
Panels with standard plywood, easy to be replaced,
allowing the reuse of panels.
The Panel Connector ensures the hermetical longitudinal
joint between panels. In addition, it conducts a corrective
function by absorbing possible deviations occurring during
assembly.
10
On-site assembly of ENKOFORM VMK panels
u
u
Columns with ENKOFORM VMK
u
Using common standard accessories of other ULMA
vertical formwork systems as stabilisers, climbing brackets,
anchors, etc.
Wall construction
MK SYSTEM
u
Silo solution with ENKOFORM VMK curved formwork on climbing structure
Applications
ENKOFORM VMK offers solutions for numerous vertical concrete geometries:
10
1
Columns
2
Embedded column - 90º wall intersections
3
Corners at 90º
4
Bulkheads
5
Fillers
6
Beam VM20 Connection Plate
7
Working bracket
8
Lifting
9
Stabilisation
10
Curved panels
8
3
1
7
9
6
5
2
4
11
MK SYSTEM
MK Shoring Systems
With the MK system, it is possible to configure different load
support structures in the field of civil engineering.
Shoring configurations:
u
MK-360 Shoring Towers
u
MK-150 Shoring Towers
u
MK Prop Shoring
u
The module sizes in plan view are of 0.75; 1; 1.5; 2; 2.5 and 3 m,
in all their combinations.
Shoring of formwork for viaduct with MK-360 towers anchored to the
foundations and with work platforms at the top for formwork erection
works
System components
2
8
3
2
3
5
3
5
4
6
1
6
3
1
1
3
2
7
MK-360 Shoring Tower:
12
2
4
MK-150 Shoring Tower:
MK Prop :
1
Waler MK
1
Waler MK
1
Waler MK
2
Jack 360 MK
2
Jack 150 MK
2
Jack 150 MK
3
End Joint MK
3
End Joint MK
3
End Joint MK
4
Horizontal Brace MK
4
Horizontal Brace MK
5
Diagonal MK
5
Diagonal MK
6
Jack Waler MK
6
Longitudinal Joint MK
7
Bracing Waler MK
8
Working platform
MK SYSTEM
System benefits
Modular and flexible system capable of providing
numerous configurations for shoring.
Possibility to assemble independent towers or entire
shoring structures.
Independent jacks give solution to superelevations.
u
Anchoring of the tower base increases the permissible
load capacity.
Connection between components
u
Easy and secure joints between components.
Anchorage of the base of the towers
Different stripping options, at base or head.
Erection of wind bracing systems between towers to
provide optimum solutions.
Shoring with MK props of prefabricated beams
in abutment
Shoring of vehicle passageway
u
Stripping with wedge at base
and head
Stripping with jacks at head
u
u
Stripping with hydraulic jack at
base and head
u
u
u
Wide range of safety items such as platforms, handrails
and ladders that can be installed at any point of the tower.
Working platforms and handrails on top of the tower
13
MK SYSTEM
MK Climbing Systems
CONVENTIONAL CLIMBING SYSTEMS
These are formwork support systems which make the construction in stages of high-rise repetitive buildings more cost-effective.
System benefits
Compatible with ULMA formwork, both modular as well as
beam-based.
In a single crane movement - entire sets of climbing brackets and
formwork panels are moved to the next pouring stage.
Easy adaptation to different geometries: straight, inclined and
circular walls.
Availability of working platforms at different levels with
protection equipment for front and lateral safety and access ladders
between platforms.
Possibility to bridge gaps in the wall.
All climbing brackets incorporate connections for handrails,
adjustable push-pull props and other accessory.
Possibility of formwork stripping with roll-back carriages.
u
Adjustment, positioning and plumbing of formwork is done with
levelling jacks and push-pull props.
Climbing systems in construction of piers
Climbing bracket anchoring to the wall with cone-andclimbing ring system.
MK Climbing Brackets
The MK Climbing Brackets consisting of standard MK Walers and specific accessory can be adapted to include solutions for sloping
and circular walls.
14
Main platform of climbing system
u
u
As the brackets are assembled out of independent walers fastened with bolts, they can also be dismantled for the purpose of saving
transport costs.
Formwork stripping system
MK SYSTEM
There are two standard configurations which may be placed at both sides of the wall:
Climbing Bracket BMK-170
Main features
u
Application: building construction and civil works
u
Platform width: 170 cm
u
35 m2 formwork surface per pair of climbing brackets
u
Anchorage to wall: DW15 and DW20
u
5 cm to 15 cm stripping distance with tilt-back system
u
Climbing bracket can be adapted to inclined wall
solutions
Climbing Bracket BMK-240
Main features
u
Application: civil works and non-residential construction
u
Platform width: 240 cm
u
35 m2 formwork surface per pair of climbing brackets
u
Anchorage to wall: DW15 and DW20
u
70 cm stripping distance with roll-back carriage, or 5 cm
to 15 cm with tilt-back system
u
Climbing bracket can be adapted to inclined wall
solutions
7
9
3
6
5
8
5
1
4
1
Climbing Bracket BMK-240
2
Main platform
3
Pouring platform
4
Cone recovery platform
5
Stripping system
6
Push-pull prop
7
Vertical waler
8
Anchorage
9
Formwork
u
System components
2
Inclined wall section with BMK Climbing
Brackets and horizontal working platforms
15
MK SYSTEM
KSP Shaft Platform
The KSP Shaft Platform system is used for the construction of lift shafts and hollow piers. The outside formwork gets supported on
ULMA Climbing Brackets.
u
System benefits
Adaptable to any size and type of formwork; as only standard and
modular material, basically, MK Walers and timber beams are used
to configure the platform.
Versatility of the Gravity Pawl Bracket which is compatible with
all types of ULMA walers and adjustable to different lengths.
There are 2 solutions depending on the type of anchoring to the wall:
u
Gravity Pawl Bracket with
box-out
u
Folding Bracket with bracket support
Provides good finish of the wall
RSK RAIL CLIMBING
Safe climbing even under the severest weather conditions is ensured with the RKS Rail Climbing system. The system allows formwork
panel climbing without the risk of them getting detached from the wall.
System benefits
Safe climbing to great heights.
Versatile and easy to configure with MK
profiles.
Large and secure platforms.
70 cm formwork stripping distance.
3
7
8
6
5
1
Two climbing options: hydraulic and
crane-assisted.
4
System components
16
1
Main platform
2
Cone recovery platform
3
Pouring platform
4
Mast
5
Anchorages
6
Roll-back carriage
7
Push-pull prop
8
Formwork
2
MK SYSTEM
HWS HYDRAULIC WINDSHIELD
The HWS Hydraulic Windshield system ensures safe working
at the perimeter of the slab under construction and the 2 levels
underneath. As the RSK Shaft Platform, the HWS screens can be
elevated either with crane or automatically with a hydraulic system.
Likewise it provides platforms for access and storage.
u
Apartment building Stawki, Warsaw, Poland
Unique geometry with HWS and platforms for material in Four Seasons,
Toronto, Canada
u
u
The use of MK system components allows obtaining different
configurations best suited to the particular needs and the building
geometry.
HWS system in SyV Tower, Madrid, Spain
System benefits
Prevents people or objects from falling down from the slab
edge.
Provides protection against the inclemency of the weather.
Avoid negative visual effect due to the height.
Provides a working platform at the slab edge.
Possibility of self-climbing (hydraulic) elevation without the
requirement for a crane.
Enables anchoring it to slab or wall.
Adaptable to slab geometry changes.
Possibility of outside platforms for material lifting.
17
MK SYSTEM
2
5
7
6
3
4
3
4
Self-climbing system, hydraulic power unit and cylinders
u
u
Pre-climbing stage or installation of protection screen
u
1
HWS with variable inclination,
adaptable to non-aligned slabs
System components
1
Mast
2
Vertical waler
3
Slab Bracket HWS
4
Head HWS
5
Cone positioning system
6
Cylinder HWS
7
Climbing Head HWS
18
Anchoring system to slab edge
u
Anchoring system to slab
u
u
Anchorage of HWS to slab or wall:
Anchoring system to wall
MK SYSTEM
Other solutions
BRIDGE SEGMENTS
PIER CAP
SINGLE-SIDED WALL FORMWORK
MK PEDESTRIAN BRIDGE
19
MK SYSTEM
System components
WEIGHT (kg)
ITEM No.
MK WALERS AND PROFILES
Profile
MK-120/0.5
MK-120/0.625
MK-120/0.75
MK-120/0.875
Waler
MK-120/1.125
MK-120/1.375
MK-120/1.625
MK-120/1.875
MK-120/2.125
MK-120/2.375
MK-120/2.625
MK-120/3.125
MK-120/3.625
MK-120/4.125
MK-120/4.625
MK-120/4.875
MK-120/5.625
WEIGHT (kg)
Longitudinal Joint MK
6
7.5
9.1
10.7
1990209
1990211
1990213
1990215
1990217
1990219
1990221
1990225
1990229
1990233
1990237
1990239
1990245
Axial node M D20 MK
Axial node M 2-D20 MK
Waler-waler 90º
joint MK
Node-waler 90º
joint MK
Spacer tube MK-120/52
Bolt M16x90
DIN-931-8.8
Nut M16 DIN-934-8
Profile
MK-180/4.625
MK-180/2.125
MK-180/2.625
MK-180/3.125
MK-180/3.625
MK-180/5.625
MK-180/7.625
MK-180/10.625
0.46
0.17
0.03
96
44.1
55
65
75
117
159
222
WEIGHT (kg)
Waler connector MK
12.2
1990700
Bottom connector MK
9.1
1990705
Upper connector MK
8.5
1990715
Swivel adjustable bottom
connector
8.8
1960090
Bottom upper connector
MK
8.6
P199071
16.5
1990890
Orthogonal joint
MK
MK-180
6.5
9.1
1990395
1991200
Universal Head
5.7
1901795
24.2 1990503
15
1990300
23
1990301
1.5
5.1
3.7
1990590
1991458
1990402
Corner connector MK
3.6
1990401
1990200
Half-way connector K-120
8.5
1990501
U main axis MK
3.8
1990513
0241690
0241600
1990037
1990017
1990021
1990025
1990029
1990045
1990061
1990085
U secondary axis MK
3.8
1990521
SPECIAL MK SYSTEM COMPONENTS
MK Shoring / MK Prop Shoring
End joint MK
U secondary axis end MK
20
ITEM No.
1990104
1990105
1990106
1990107
Axial node M D40 MK
Axial node 90º M
D40 MK
29.4
35.5
41.9
47.9
54
60
68
81
93
107
120
126
146
ITEM
No.
CÓDIGO
MK CONNECTORS
2.7
1990421
24.4
1990504
MK SYSTEM
WEIGHT (kg)
Adjustable head MK
Ancore profile DU-160/1
34.2
40.7
ITEM No.
1990594
WEIGHT (kg)
Node 360 MK
Articulated adj.
connector MK
15.7
1990730
Bulk head MK
1.4
1990850
3
1990845
0005003
Outside corner head MK
WEIGHT (kg)
ITEM No.
ITEM No.
50
1990665
40.2
1990365
Plate node head MK
17
1990400
Plate waler head MK
15.7
1990405
V Bracing truss
19.5
1990404
Head joint 74 MK
26.1
1990374
Node 60 support MK
ENKOFORM HMK
Lifting hook H-120
12.4
0263005
C-VM20 Coupling MK
ENKOFORM VMK
Lifting bracket E V-100
Panel connector MK
Wedge MK
1.8
1990811
MK Structures
10.2
9.5
1.2
1960220
1990800
1990801
Node 180 MK
Node 180 D40 MK
Node 120 MK
30.6
31.8
24
1990485
1990480
1990420
HWS Hydraulic Windshield System
Adjustable connector
MK
Waler extension MK
11.1
10.4
1990810
Node 90 MK
1990830
Node 60 M MK
36.3
1991205
Cone positioner
HWS-DW15
HWS-DW20
4.5
5.3
1991230
1991220
1.95
1901245
2.3
1991225
1990390
1990895
Node 60 F MK
Articulated connector MK 12.9
18.8
Mast hinge HWS
16
1990360
21.4
1990361
Cone-waler connector
Cone-waler connector
M30
21
MK SYSTEM
WEIGHT (kg)
Head HWS
Slap end bracket HWS
Wall bracket HWS
26.8
16.5
9.3
ITEM No.
1991100
1991105
1991115
WEIGHT (kg)
Wall assembly
rod HWS
Fixed head
0.471
1991170
1.01
2
1901080
0238050
Fixed anchor DW15
Fixed anchor DW20
0.45
0.85
0230005
0238025
0.75
Slap bracket HWS
41.7
Bolt M30x220
DIN931-8.8
2.2
0339080
Climbing bracket
BMK-240
0243029
Slap assembly rod HWS
2.2
1991175
Offset fitting DW15 HWS
2.1
1991180
Plate 135x135x15 (D25)
2.1
1991195
Offset bushing joint HWS 0.92
22
6
1991503
Push pull prop head
MK-120
4.9
1991439
Platform support
MK-120
7.2
1991427
Platform back support
MK-120
8.9
1991434
Bottom support
2.7
1991487
19.7
1991498
7.1
6.0
1991360
0331010
Waler base connector
11.4
0331008
Waler screw TR53x6
Waler screw bracket
TR53x6
10.8
0302020
12.2
0302022
Diagonal BMK-170
162
1991417
Lifting hook MK
Lifting waler hook
Tilt-back MK-120
4.1
1991410
1991424
1991110
Climbing bracket
BMK-170
Self-climbing block HWS
232
12.2
ITEM No.
14.4
Swivel head
Cone DW15/M24
Cone DW20/M30
MK climbing brackets
Bolt M30x80
DIN912-10.9
WEIGHT (kg)
ITEM No.
1991467
1991370
1991120
Roll-back carriage
38.5
1991444
MK SYSTEM
WEIGHT (kg)
Bushing D40 d20 L47
Waler fixing hook
0.35
ITEM No.
0661505
2.3
0333004
22
0306032
KSP Shaft Platform
Gravity pawl bracket
Short gravity pawl
15
0306054
Adjustable bracket
8.7
0306072
GP Box- out
Short pin 0.35
1.5
0.6
0306001
1861033
GP retrievable box-out
6.2
0306002
WEIGHT (kg)
Diagonal
MK 0.75x1.5/1396
MK 0.75x3/2845
7.7
19.4
1990614
1990628
MK
MK
MK
MK
1x1/1110
1x1.25/1300
1x1.5/1508
1x2/1904
6.1
7.2
8.3
10.5
1990611
1990612
1990615
1990620
MK 1.125x1.75/1797
12.1
1991485
MK
MK
MK
MK
1.5x1.5/1818
1.5x2/2201
1.5x2.5/2624
1.5x3/3071
10.1
12.2
17.9
20.9
1990619
1990622
1990626
1990630
2x2/2524
2x2.125/2625
2x2.5/1x3/2900
2x3/3310
17.2
17.6
19.7
22.5
1990625
1991482
1990629
1990633
MK
MK
MK
MK
Bolt M20x100
DIN-931-8.8
Bolt M20x150
DIN-931-8.8
Nut M20 DIN-934-8
Horizontal diagonal
head MK
Folding bracket M24
13.5
0.30
0242010
0.50
0.06
0242015
0242000
2.9
1990600
2.4
1/800
1.5/1300
2/1800
2.5/2800
3/2800
7.6
8.6
9.3
13
15
16.7
1960135
1960140
1960195
1960235
1960240
1960245
46.5
0333014
41.7
1991514
Joint push-pull prop
E-node MK
1.3
1990403
Screw jack V TR45 head
7.9
1960261
Right angle head
Fixed head
2.2
2.6
1960172
1960420
Swivel push pull prop
head
2.4 1960120
Head join prop waler
2.5 1960370
Screw
Screw
Screw
Screw
Screw
Screw
prop
prop
prop
prop
prop
prop
prop
jack
jack
jack
jack
jack
jack
V
V
V
V
V
V
E
E
E
E
E
E
E
0.51-0.75
0.75-1.05
1-1.55
1.51-2.2
2.15-2.75
2.7-3.3
3.25-4
27-33
32.5-43
42-53
52-70
69-90
89-110
Push pull prop
Push pull prop TR63x6
2.04-2.72 (D32)
Push pull propTR63x6
1.52-2.2 (D32)
0212100
MK HORIZONTAL TUBES, MK DIAGONALS
AND PUSH-PULL PROPS
MK Horizontal tubes and MK Diagonals
MK
MK
MK
MK
MK
1960210
1960100
1960110
1960115
1960130
1960125
1960410
pull
pull
pull
pull
pull
pull
pull
0306020
Push pull prop 1” 0.360.52 (D20)
1.9
2.7
4.5
6.2
7.9
15.6
ITEM No.
10.6
14.1
18.8
24.1
33.4
38.1
45.0
Push
Push
Push
Push
Push
Push
Push
Push pull prop heads
Push pull props
Horiz. tube
MK 0.75/550
WEIGHT (kg)
ITEM No.
1990605
1990608
1990613
1990618
1990623
1990627
Push pull prop 1.5”
0.44-0.66 (D20)
6.19
0212125
23
MK SYSTEM
WEIGHT (kg)
Profile pipe brace
connector ATR
ITEM
No.
CÓDIGO
WEIGHT (kg)
ITEM
No.
CÓDIGO
LEVELLING AND TRANSFER
3
0336055
1.8
3.7
5.5
7.0
8.7
11.4
12.1
14.6
18.0
20.0
2125288
2125289
2125290
2125291
2125647
2125249
2125648
2125250
2125251
0200600
Jack MK 60
1960385
1960390
1960400
Jack waler
MK 0,5/1000
MK 1/1500
MK 1,5/2000
MK 2/2500
Jack MK 360
40.2
48/0.5
48/1.1
48/1.6
48/2.1
48/2.6
48/3.1
48/3.6
48/4.1
48/5
48/6
Bracing
R-120/1
R-120/1.5
R-120/2
13.5
16.2
18.8
Jack MK 150
Wheel 15 MK
18.3
1990660
Driving wheel 100 MK
125
1990656
Rolling beam S-20/6
119
0916578
Rolling beam UPN
100/4
44.3
0261519
36.1 1990515
7.4
113
161
207
253
1990506
1990530
1990551
1990552
1990553
Electrical box
Right angle coupler 48/48
Swivel coupler 48/48
Double spigot 48
Simple bracing
Wall bracing plate
D48x150
1.2 2125148
1.3 2125147
1.3
3.4
1.6
Triangular base trolley
1500 MK
34
1990645
6
1990667
Motor cable
6
1990668
Electric power cable
6
1990669
2125312
0260505
Bracing waler
MK 500
MK 1/1500
MK 1.5/2000
MK 2/2500
48.5
109
137
164
1990565
1990561
1990562
1990563
0260500
Screwing plate W/coupler
24
Centring plate MK
0.9
1.4
12 1990666
Wheel control pad
Rail shoe
Half-coupler D48
M20x70
ITEM
No.
CÓDIGO
1990550
Bracing and D48 tubes
Tube
Tube
Tube
Tube
Tube
Tube
Tube
Tube
Tube
Tube
WEIGHT (kg)
23.5
33.4 1990406
1990595
0200004
2211168
Adjustable abutment
head 500
Wheel 100 MK
49.4
1990655
59
0001003
MK SYSTEM
WEIGHT (kg)
Elongation support
35
50
Bolt M24x60
DIN-933-8.8
Washer A24 DIN-125
Nut M24 DIN-934-8.8
32.9
39.5
0.3
0.03
0.11
ITEM No.
WEIGHT (kg)
WEIGHT (kg)
ITEM No.
ITEM No.
Climbing head HWS
13.1
1991300
Handrail support VM
6.9
2211165
Hoist
ATR 2TN
ATR 3TN
22.3
34.9
0336067
0336068
Handrail post 1.5
Safety handrail 1.5 wood
Safety handrail 1.2 wood
9.6
8.1
7.2
2211156
2211185
0121000
Panel bolt
0.39
1861122
Toe board 4000x200x50
16.8
2211225
Ladder C2.1
Ladder C3
19.6
27.1
0333008
0333009
Ladder horizontal
hook T-500
1.8
0005416
Ladder fixer
1.6
0333010
Ladder hanger
1.6
0333011
Ladder protection
13.1
0333012
Ladder hatch
11.3
0333013
0001004
0001006
0242460
0242401
0242400
PLATFORMS AND LADDERS
Joint clamp 16/70
Wedge jack
50 TN
100 TN
1.8
28
53
0260006
Assembly platform
21
0005452
0262050
0262051
Extending platform
1-1.5
1.5-2.35
2-2.7
12.6
17.3
20.6
2067035
2067048
2067043
HYDRAULIC SYSTEM AND PULLEYS
Hydraulic jack
30 TN
manual MG-20TN
Hydraulic power unit
HWS
Hose
7m male HWS
7m female HWS
1m HWS
Cylinder HWS
13.7
20
185
1990654
0263507
1991310
1.68
1.96
1.13
1991311
1991312
1991320
36
1991350
Platform
Platform
Platform
Platform
Platform
1.02
1.5
2
2.5
3
9
12.4
17
20.2
22.2
2127717
2127716
2127715
2127714
2127713
Handrail head MK
0.82
1990570
Handrail socket
D50
MK/D50
2.9
2.4
0121004
0335237
Handrail socket 0-20º
3.7
1960505
25
MK SYSTEM
WEIGHT (kg)
ITEM No.
PLATES, ANCHORS AND TIE RODS
Tie
Tie
Tie
Tie
Tie
Tie
Tie
Tie
Tie
Tie
Tie
Tie
Tie
Tie
Tie
Tie
Tie
Tie
rod
rod
rod
rod
rod
rod
rod
rod
rod
rod
rod
rod
rod
rod
rod
rod
rod
rod
15/0.11
15/0.16
15/0.2
15/0.26
15/0.28
15/0.4
15/0.5
15/1
15/1.5
20/0.15
20/0.2
20/0.25
20/0.33
20/0.5
20/1
20/1.5
26/1.15
26.5/6
0.158
0.229
0.29
0.38
0.41
0.68
0.85
1.7
3.3
0.37
0.55
0.66
0.879
1.332
2.64
3.8
5.4
26.9
0230111
0230116
0230020
0230026
0230028
0230040
0230050
0230100
0230150
0234015
0234020
0234025
0234033
0234050
0234100
0234150
1907131
0231600
WEIGHT (kg)
Pin E20x70
Pin C/HEAD D20x100
Cotter R/5
Pin C/HEAD D32x135
Pin C 32x200 6.8
0.97 0335226
1.4 0253220
Fixed anchor DW20
0.97 0238025
Wing nut 20
Base plate D20
Plate
100x100x15
135x135x15
150x150x15
150x150x15
(D22)
(D25)
(D22)
(D30)
Open plate 150x150x15
(D22)
1.2
2.1
2.7
2.7
2.4
0261000
1991195
0261001
1261004
1.4
Plate washer nut 20
1.2 1905160
1.4 1907133
Nut DW 26.5
0.7 0231000
Wind bracing plate
12 1990560
Wind tie rod end DW-26
4.7 1990690
Wing nut DW15
26
WEIGHT (kg)
ITEM No.
Saffety pin D 8x60
0.05
9023108
Bottom wind bracing
head
254
1990599
Bottom wind bracing
head
24.6
1990500
7.3
9.5
10.8
12.3
13.3
14.5
16.5
18
19.5
22.5
24.5
29.5
1940191
1940172
1940197
1950129
1940196
1940144
1950130
1940146
1950112
1940178
1950113
1940149
0.81
1960375
Waler-VM20 angular
clamp
1.3
1960345
Toolkit case
2.3
1960450
BEAM VM
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
VM
VM
VM
VM
VM
VM
VM
VM
VM
VM
VM
VM
20/1.45
20/1.9
20/2.15
20/2.45
20/2.65
20/2.9
20/3.3
20/3.6
20/3.9
20/4.5
20/4. 9
20/5.9
1900256
0.73 7238000
0.22
2.2 1905047
Hexagonal coupler
DW-26
Waler-VM20 clamp 2T
Tie rod bypass
Top wind bracing head
Hexagonal nut 15
0.37 1905046
0261005
Plate washer nut 15
Plate nut 15
ITEM No.
0.28 0252070
0.29 0335153
0.03 0250000
3.3 1990695
23.4 1990598
7238001
0.33 0230000
Pin D50x75
1.9 1990411
MK SYSTEM
ULMA Construcción around the world
www.ulma-c.com
PRODUCTION PLANT
AND HEADQUARTERS
ULMA C y E, S. Coop.
Ps. Otadui, 3 – P.O. Box 13
20560 OÑATI (Gipuzkoa)
SPAIN
Phone: +34 943 034 900
Fax: +34 943 034 920
EUROPE
u Spain
ULMA C y E, S. Coop.
www.ulma-c.es
Canary Islands Branch
GÜIMAR (Tenerife)
INGENIO (Las Palmas)
Centre Branch
AJOFRÍN (Toledo)
East Branch
POLINYA (Barcelona)
LLUCMAJOR (Baleares)
North Branch
LEGUTIANO (Araba)
West Branch
CAMBRE (A Coruña)
South Branch
PELIGROS (Granada)
u Germany
ULMA Betonschalungen
und Gerüste GmbH
RÖDERMARK
www.ulma-c.de
Northwest Branch
NEUSS
Southwest Branch
GÖPPINGEN
East Branch
ARNSTADT
u France
ULMA, S.A.R.L.
BONDOUFLE
www.ulma-c.fr
u
Italy
ALPI, S.P.A.
MONGUELFO (BZ)
www.alpionline.net
uPoland
ULMA Construccion
Polska S.A.
WARSAW
www.ulma-c.pl
EAST REGION
Warsaw Branch
WARSAW
Olsztyn Branch
OLSZTYN
Łódź Branch
ŁÓDŹ
ULMA Cofraje s.r.l.
BUCHAREST
www.ulma-c.ro
uUkranie
ULMA Formwork
Ukraine Ltd.
KIEV
www.ulma-c.com
Dniepropetrowsk Branch
DNIEPROPETROWSK
Poznań office
POZNAŃ
Bydgoszcz pffice
BYDGOSZCZ
AMERICA
GDAŃSK BRANCH
Gdańsk office
GDAŃSK
Szczecin office
SZCZECIN
WROCŁAW BRANCH
Wrocław office
WROCŁAW
Nowa Sól office
NOWA SÓL
SOUTH REGION
Katowice Branch
JAWORZNO
Cracow Branch
CRACOW
Lublin Branch
LUBLIN
SCAFFOLDINGS BRANCH
Warsaw office
Warsaw
Płock office
PŁOCK
uPortugal
Eguilles Branch
EGUILLES
Oporto Branch
VILA NOVA DE GAIA - Oporto
Tarnos Branch
TARNOS
uRomania
Odessa Branch
ODESSA
ULMA Portugal Lda.
SÃO JOÃO DA TALHA - Lisbon
www.ulma-c.pt
Pau / Lons Branch
LONS
ULMA Construccion SK, s.r.o.
BRATISLAVA
www.ulma-c.sk
POZNAŃ BRANCH
Paris Region Branch
BONDOUFLE
Lille Branch
LA CHAPELLE D’ARMENTIÈRES
u Slovac Republic
uCzech Republic
ULMA Construcción CZ, s.r.o.
BENÁTKY NAD JIZEROU
www.ulma-c.cz
uArgentina
ULMA Andamios y
Encofrados Argentina, S.A.
FEDERAL CAPITAL
www.ulma-c.com.ar
uBrazil
ULMA Brasil - Fôrmas e
Escoramentos Ltda.
ITAPEVI - SP
www.ulma-c.com.br
Rio de Janeiro Branch
ANIL - Rio de Janeiro - RJ
Brasilia Branch
GUARÁ - Brasília DF
Bahia Branch
CIA SUL - Simões Filho
South Branch
NAVEGANTES - Porto Alegre RS
Minas Gerais Branch
FUNCIONARIOS - Belo
Horizonte
uCanada
ULMA Construction Systems
Canada Inc.
BOLTON - Ontario
www.ulma-c.ca
uChile
ULMA Chile - Andamios y
Moldajes, S.A.
SANTIAGO
www.ulma-c.cl
uUSA
ULMA Form Works, Inc.
HAWTHORNE - New Jersey
www.ulma-c.us
West Branch (Phoenix)
GILBERT - Arizona
Mid-Atlantic Branch
(Baltimore)
JESSUP - Maryland
uMexico
ULMA Cimbras y Andamios
de México S.A. de C.V.
TLALNEPANTLA
(Mexico State)
www.ulma-c.com.mx
uPeru
ULMA Encofrados Perú, S.A.
LIMA
www.ulma-c.com.pe
North Branch
CHICLAYO - Lambayeque
ASIA-AFRICA
uP.R. China
ULMA Formworks China R.O.
SHANGHAI
www.ulma-c.cn
uUAE
ULMA Formworks UAE L.L.C.
DUBAI
www.ulma-c.ae
uIndia
ULMA FORMWORK
SYSTEMS INDIA PVT. LTD.
GURGAON - Haryana
www.ulma-c.in
Mumbai Branch
Mumbai - Maharashtra
uKazakhstan
ULMA Formwork
Kazakhstan Ltd.
ASTANA
www.ulma-c.kz
uSingapore
ULMA Formwork Singapore
PTE. LTD.
SINGAPORE
www.ulma-c.sg
North Branch
ANTOFAGASTA
South Branch
CONCEPCIÓN
27
01FIN05
SPAIN
Phone: +34 943 034900
Fax: +34 943 034920
www.ulma-c.com