KOMATSU DOZER PROTECTION

KOMATSU DOZER
PROTECTION
20 Molloy Street, Toowoomba QLD
Ph: 07 4615 0100 Email: [email protected]
www.gessner.com.au
20 Molloy Street, Toowoomba QLD
Ph: 07 4615 0100
Email: [email protected]
www.gessner.com.au
D85 Medium Duty Scrub Canopy
Komatsu D275 Medium Duty Canopy
For additional protection Gessner
offer Full Scrub Class Canopies
with solid RHS construction, a
thick plate roof, high tensile mesh
panels and double bar cylinder
protection. Gessner canopies are
custom designed for each model of
machine. They are manufactured
in such a way that when fitted,
they not only protect the Dozer, but
look like an OEM product, adding
additional value to your machine.
Also see Gessner Stickrakes,
Tree Spears and Dozer
Blades to ensure that your
machinery is fitted with the
highest quality equipment.
D85 EX Medium Duty
Scrub Canopy
• Medium duty mainframe
manufactured from 100 x 100 x
6mm SHS
• 6mm plate steel protection to roof
over cab.
• 40 x 40 x 6mm HT mesh spans
front section, covering dozer hood.
Mesh may be replaced by plate steel
to customer’s specification.
• High density rubber supports
between ROPS and canopy.
• Bolt-in mesh side panels that are
hinged for safe removal.
• Hinged lower side plate providing
protection to tanks and accessibility.
D275 AX Medium Duty Canopy
• High strength 125 x 125 x 6mm
SHS mainframe construction.
• 8mm plate steel protection to roof
over cab.
• 40 x 40 x 6mm HT mesh spans
front section, covering dozer hood.
Mesh may be replaced by plate steel
to customer’s specification.
• Side mesh and lower plates (not
fitted in pictured example).
Optional Extras Shown on
Adjacent Dozer:
• Gessner service platforms to side
and rear of cab.
• Rock guard to top blade.
20 Molloy Street, Toowoomba QLD
Ph: 07 4615 0100 Email: [email protected]
www.gessner.com.au
23220
Gessner offer a wide range of
options for all makes of dozer so
that your needs are catered for.
Our basic ROPS mount canopies
start with roof and front cylinder
protection with the capacity for
the addition of middle and rear
legs that then allow the fitment of
side mesh panels. ROPS mount
canopies can be supplied fitted to
machine by Gessner or supplied
as flat pack for ease of shipping.
Detailed fitting instructions are also
supplied for all canopies not fitted
at Gessner factory.