Catalog: Tractor Parts - John Deere

Transcription

Hitch & Drawbar Parts
AGCO
A-AL40976
Load Control Shaft Kit
6.3 Lbs.
Kit contains: (1) A-L41787 Shaft, (2) A-L41196 Bushings, (2) A-L55844
Sealing Washers, (4) A-L41154 Washers (2) A-L41788 Bushings (2)
L26943 Pins & (2) L26936 Clamps.
ALLIS
For Models: 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2350, 2550, 2750
CHALMERS A-L26932
Shaft, Load Control (Ref. 1)
2.88 Lbs.
DEUTZ
Replaces: T26598
WHITE/
OLIVER
CNH
A-T22097
A-T22099
A-T22098
A-A4730R
Bushing, w/ O-Ring (Ref. 2)
Bushing, Outer Load Control (Ref. 3)
Washer
O'Ring
For Models: 840, 940, 1020, 1030, 1040, 1120 SN 42624>, 1130, 1140, 1350
SN <651779, 1530, 1550 SN <651779, 1650, (1750, 1850 ALL SN <651779),
2040, 2150, 2155 SN <651779, 2240, 2255, 300B, 300B IND SN <715670, 301A
SN <715670, 302, 302A IND, (300, 301 ALL SN 135288>)
A-L26937
Replaces: T22651, T26599
CASE-IH
FORD / NEW
HOLLAND
FIAT
0.54 Lbs.
0.18 Lbs.
0.01 Lbs.
0.01 Lbs.
Bushing, Load Control
0.5 Lbs.
0.15 Lbs.
0.36 Lbs.
0.36 Lbs.
For Models: 400, 2020, 2030, 2440, 401C IND, 401D SN <715640, 401B SN
<715670, 401 SN 134706>, (1520, 1530 ALL SN 178601-179600), 2120 SN
39087>
BELARUS
A-T22095
Washer, Sealing
Used w/ A-L26937 load control shaft
0.01 Lbs.
BOBCAT
KUBOTA
A-R27016
Load Control Bushing
For Models: 2510 Row Crop & Hi-Crop, 3010 Row Crop & Standard, 3020 SN
<122999 Row Crop, Standard & Hi-Crop, 500, 500A
A-T28548
Bushing, Load Control
A-R54217
3.66 Lbs.
Dim/Info:
19.440" Long
.930" Dia.
A-R54220
A-L41787
A-L41819
Shaft, Load Control
RENAULT
SAME
VALTRA
A-L41196
A-L55844
A-L41154
Bushing, w/ O-Ring
Sealing Ring
Washer, Load Control
0.38 Lbs.
0.01 Lbs.
0.02 Lbs.
A-L41788
Bushing, Load Sensing
0.34 Lbs.
For Models: 2040S, 2140, 2650, 2840, 2850, 2940, 2955, 3030, 3050, 3055,
3130, 3255, 3350, (2950, 3040, 3140 ALL SN 531762>)
Shaft, Load Control
4.1 Lbs.
Dim/Info:
20.000" Long
1.102" Dia.
A-L41196
Washer, Load Control
SPEECO
A-L41196
0.38 Lbs.
For Models: 3150, 3640, 3650, (2040S, 2140, 2650, 2850, 2955, 3040, 3050,
3055, 3140, 3155, 3255, 3350 ALL W/ HIGH LIFT)
0.38 Lbs.
For Models: 1641F, 1830, 1840, 1950, 1950N, 2030, 2130, 2250, 2355, 2450,
2555, 2640, 2650, 2650N, 2755, 2850, 2855, 2855N, 300B IND SN 715671>,
2750 SN 529512->, (1640, 2040, 2040S, 2140, 2350, 2550 ALL SN 529512>),
(1350, 1550, 1750, 1850, 2155 ALL SN 651780>), 401D SN 715641>, 301A SN
715671>
A-L41154
5.78 Lbs.
Dim/Info:
25.250" Long
1.102" Dia.
0.48 Lbs.
A-R33883
Replaces: R27017
4 Lbs.
Dim/Info:
20.937" Long
1.000" Dia.
0.02 Lbs.
Dim/Info:
1.660" O.D.
VERSATILE
1.145" I.D.
.047 Thick
YANMAR
For Models: 1640, 1641F, 1830, 1840, 1950, 2030, 2040, 2130, 2140, 2155,
2250, 2355, 2355N, 2450, 2555, 2650, 2755, 2840, 2850, 2855N, 2940, 2955,
ZETOR
3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650,
401B, 2640 SN 341000>, (2350, 2550, 2750 ALL SN 529512>), 2950 SN
531762>, (1350, 1550, 1750, 1850 ALL SN 651780->), 401D SN 715641>,
SCHWARTZ (301A, 300B ALL SN 715671>)
130
5.12 Lbs.
Dim/Info:
22.750" Long
1.102" Dia.
A-L41197
McCORMICK
OTHER
0.06 Lbs.
For Models: 1640, 1830, 1840, 2020, 2030, 2040, 2040S, 2120, 2130, 2140,
(2350, 2550 ALL S/N <-529511), 2640 S/N 341000->, 2750 S/N <-529511,
2840, 2940, 2950 S/N <-531761, (300B, 301A ALL S/N 715671->), 3030, 3040,
3120, 3130, 3140, 401B, 401D S/N 715641->
For Models: 2630, 2640
LONG
0.55 Lbs.
For Models: 1520, 1530 SN 178601-179600, 2020, 2030, 2120, 2440, 401B,
401C, 401D SN <715640, 400, 401
LANDINI
LEYLAND
For Models: 1640, 1641F, 1830, 2030, 2040, 2040S, 2130, 2140, 2155, 2350,
2355, 2355N, 2550, 2555, 2650N, 2755, 2840, 2855N, 2940, 2955, 3030, 3040,
3050, 3055, 3130, 3140, 3350, 1840 <429999, (1350, 1950, 1950N, 2250,
2450, 2650 ALL EURO), 2640 SN 341000>, 2750 529512>, 2950 531762>,
(1550, 1750, 1850 ALL 651780>)
Dim/Info:
sold in multiples of 2
JCB
JOHN
DEERE
Dim/Info:
1.656" O.D.
1.107" I.D.
3.3 Lbs.
Dim/Info:
19.460" LongG
.877" Dia.
A-T22094
A-T22096
A-R47061
A-R50985
0.34 Lbs.
A-R27018
Bushing, w/ O-ring (Ref. 2)
A-R27018003 Bushing, w/ O-ring (Ref. 2)
Bushing is .003 oversize.
A-AR27371
Seal, Load Control (Ref. 3)
A-R66425
Shims, Load Control (Ref. 4)
0.12 Lbs.
0.12 Lbs.
0.13 Lbs.
0.14 Lbs.
0.04 Lbs.
0.28 Lbs.
For Models: 500, 2510, 2520, 3010, 3020, 4030, (500A, 500C ALL IND)
*** Truck icon indicates the item is shipped via truck freight .***
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
Dim/Info:
19.690" Long
.815" Dia.
MASSEY
FERGUSON
A-L41788
Bushing, Load Sensing
Used w/ A-L41819 shaft.
A-R33826
5 Lbs.
A-AR103729
Bushing Support, Load Sensing Shaft
7.05 Lbs.
Dim/Info:
21.620" Long
1.124" Dia.
A-R26505
AGCO
0.11 Lbs.
Dim/Info:
1.565" O.D.
A-AR84792
Sold in lots of 2, priced per seal.
A-R45515
Shims, Load Control (Ref. 4)
0.12 Lbs.
For Models: 4050, 4050E, 4055, 4250, 4250E, 4255
A-AR104003
Bushing Support, Load Sensing Shaft
7.05 Lbs.
DEUTZ
0.12 Lbs.
MASSEY
FERGUSON
0.11 Lbs.
WHITE/
OLIVER
0.04 Lbs.
0.3 Lbs.
For Models: 600, 4010, (4000, 4020 ALL SN <-250000)
A-R46513
Replaces: AR41773, R40480
ALLIS
CHALMERS
For Models: 4040S, 4240S, 4350, 4450, 4455
A-R36482
(2) used
Bushing, Draft Link Support
0.37 Lbs.
5.95 Lbs.
CNH
Dim/Info:
21.180" Long
1.124" Dia.
For Models: 700A, 5010, 5020
A-AR54481
0.48 Lbs.
includes: R53177 back-up ring & R53180 O-ring
A-R54785
0.46 Lbs.
bushing is .020 oversize. Use if case is marked on RH sideat shaft opening.
CASE-IH
A-R71476
Bushing, Front Drawbar Support Load Sensing 0.18 Lbs.
FORD / NEW
Used w/ A-AR76096 & A-AR83603 Front Drawbar Supports
Replaces: R41084
HOLLAND
FIAT
For Models: 4040, 4230, 4240, 4320, 4430, 4440, 4455, (4000, 4020 ALL SN
250001->)
A-R43318
7.46 Lbs.
Dim/Info:
20.06" Long
1.300" Dia.
A-R43315
Bushing (Ref. 2)
Used w/ R46680 or R46960
A-AR84793
Replaces: AR43103, AR78339
A-R54969
0.08 Lbs.
7.52 Lbs.
Bushing w/ O-ring (Ref. 2)
Washer
O'Ring (4/Pack)
O'Ring (4/Pack)
Valve Seat Insert, Rockshaft Cylinder
0.05 Lbs.
0.76 Lbs.
0.01 Lbs.
0.01 Lbs.
0.01 Lbs.
Dim/Info:
Rockshaft
LONG
McCORMICK
OTHER
33.07 Lbs.
RENAULT
7.58 Lbs.
Dim/Info:
24.250" Long
1.186" Dia.
O-Ring, Load Control
For Models: 6310S, 6410, 6410S, 6510S, (6200, 6200L, 6300, 6300L, 6400,
6400L, 6500, 6500L ALL SN: 187952 >), (6110L, 6205, 6210L, 6310L, 6405,
6505, 6510L, 6605 ALL SN: < 291142)
A-R126709
Rockshaft
52.29 Lbs.
0.01 Lbs.
For Models: 4040S, 4050, 4055, 4240S, 4250, 4255, 4350, 4450, 4455
A-F1056R
JOHN
DEERE
LEYLAND
For Models: 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130,
1140, 1520, 1530, 1630, 1640, 1641F, 1830, 1840, 2020, 2030, 2040, 2040S,
2120, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2550, 2555,
2630, 2750, 2755, 2840, 2855N, 2940, 2950, 2955, 3030, 3040, 3055, 3120,
3130, 3140, 3150, 3155, 3255, 3640, 300B, 301A, 302, 302A, 3640S, 401B,
401C, 401D, 300, 301, 400, 401
For Models:
A-R79779
JCB
LANDINI
A-L152475
A-R71375
BOBCAT
KUBOTA
For Models: 4630, 7520 SN 1572->, 7020 S/N 2700->
A-R53198
0.06 Lbs.
For Models: 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640,
1830, 1840, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2240, 2255,
2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940,
2950, 2955, 300B, 301A, 302, 302A, 3030, 3040, 3055, 3120, 3130, 3140, 3150,
3155, 3255, 3640, 401B, 401C, 401D, 820, 830, 840, 920, 930, 940, 300 S/N
146363->, 301, 400 S/N 146363->, 401
A-T28538
Dim/Info:
20.000" Long
1.300" Dia.
A-AR56769
A-R52184
A-R53198
Valve Spool, Rockshaft Cylinder
BELARUS
0.18 Lbs.
For Models: 4520, 4620, 7020 SN<-2699, 7520 SN<-1571
A-R52185
For Models: (4000, 4020 ALL SN 201000>), 4040, 4230, 4240, 4320, 4430,
4440, 4455
0.02 Lbs.
Lift Arm, Rockshaft
VALTRA
VERSATILE
For Models: 6810, 6910, 6910S, 7210, 7405, 7410, 7500, 7510
A-R56175
SAME
16.2 Lbs.
YANMAR
ZETOR
For Models: 4040S, 4050, 4050E, 4055, 4240S, 4250, 4250E, 4255, 4350, 4450,
4455
For Models: 2520 Row Crop, 3020 SN 123000>, (4000, 4020 ALL SN 201000>
Row Crop & Standard), 4030, 4040, 4230, 4320, 4430
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
SCHWARTZ
SPEECO
131
A-AT20167
A-AT20168
Plate, Support (RH)
LH Support Plate
6.8 Lbs.
6.72 Lbs.
A-R104901
A-R104902
Sway Block (RH)
Sway Block (LH)
18 Lbs.
18 Lbs.
AGCO
ALLIS
For Models: 820, 830, 920, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350,
CHALMERS 1520, 1530, 1550, 1630, 1641F, 1750, 1850, 1950, 1950N, 2020, 2030, 2040,
DEUTZ
2120, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750,
2755, 300B IND, 301A, 302, 302A, 401B, 401C IND, 401D, 300, 301, 400, 401
Sway Block (RH)
Sway Block (LH)
8 Lbs.
8 Lbs.
For Models: 4440, 4450, 4455, (4250, 4255 ALL W/ CAT III NARROW)
A-R64706
A-R64707
Sway Block (RH)
Sway Block (LH)
16.5 Lbs.
16.5 Lbs.
WHITE/
OLIVER
For Models: 520, 530, 620, 630, 720, 730
A-T30276
A-T30277
Sway Block (RH)
Sway Block (LH)
9.15 Lbs.
9.15 Lbs.
CNH
For Models: 4555, 4560, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 4640 SN
012685->
A-R48815
A-R48816
Sway Block (RH)
Sway Block (LH)
25.5 Lbs.
25.5 Lbs.
CASE-IH
For Models: 820, 830, 840, 920, 940, 1020, 1030, 1040, 1120, 1130, 1140,
FORD / NEW 1350, 1520, 1530, 1630, 1640, 1641F, 1750, 1830, 1840, 1850, 1950, 1950N,
HOLLAND 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255,
FIAT
For Models: 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, 700A
2350, 2355, 2440, 2450, 2550, 2555, 2630, 2640, 2750, 2755, 2850, 301A,
302, 401B, 401D, 300, 301, 400, 401
A-T13246
A-T13247
Sway Block (RH)
Sway Block (LH)
For Models: 2010 SN: 42001 >, RC UTILITY
BOBCAT
A-R54472
A-R54473
12.96 Lbs.
13.2 Lbs.
JCB
JOHN
DEERE
Top Link Bracket
For Models: 820, 830, 840, 920, 940, 1020, 1030, 1040, 1120, 1130, 1140,
1350, 1520, 1530, 1550, 1630, 1640, 1641F, 1750, 1830, 1840, 1950, 1950N,
2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255,
2350, 2355, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750,
2755, 2850, 2855, 2855N, 300B IND, 302, 302A IND, 310A, 401B, 401C IND, 401D,
300, 301, 400, 401
A-R27803
KUBOTA
For Models: 2840, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3120, 3130,
3140, 3255, 3350
LANDINI
A-R27710
A-R27711
Sway Block (RH)
Sway Block (LH)
Top Link Bracket
A-F2680R
Top Link Ball (Cat. I)
McCORMICK For Models: 3010
A-AR31560
A-AR31561
Sway Block (RH)
Sway Block (LH)
9.6 Lbs.
10.51 Lbs.
RENAULT
For Models: 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2355, 2510,
2440, 2555, 2520, 2630, 2640, 2755, 2840, 2855, 2955, 3010, 3020, 3055,
3155, 3255, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250,
4255, 4320, 4430, 4440, 4450, 4455, 520, 530, 620, 630, 720, 730
A-F2681R
SAME
For Models: 4010
VERSATILE
A-R39512
A-R39513
0.96 Lbs.
Dim/Info:
3/4" Hole
For 2" Round Socket
LONG
VALTRA
14.35 Lbs.
12 Lbs.
12 Lbs.
LEYLAND
OTHER
5.94 Lbs.
15 Lbs.
15 Lbs.
BELARUS
Sway Block (RH)
Sway Block (LH)
A-T21685
Sway Block (RH)
Sway Block (LH)
13.8 Lbs.
13.8 Lbs.
YANMAR
Top Link Ball (Cat. II)
0.78 Lbs.
Dim/Info:
1" Hole
For 2" Round Socket
1 3/4" Wide
For Models: 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2355, 2440,
2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020,
3055, 3155, 3255, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240,
4250, 4255, 4320, 4430, 4440, 4450, 4455, 520, 530, 620, 630, 720, 730
ZETOR
For Models: 600, 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4040S, 4050,
4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4430, 4455
SCHWARTZ
SPEECO
132
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
MASSEY A-R21717
FERGUSON A-R21718
A-AF520TL
Center Link Assembly
24.7 Lbs.
Assembly consists of the following items: (1) A-AF2873R , (1) A-AR21917R
, (1) A-AF2798R & (1) A-AF2799R .
A-AR92432
16.2 Lbs.
Assembly consists of the following items: (1) A-R70183 , (1) A-AT19795 ,
(1) A-AT19796 & (1) A-T22008 .
AGCO
ALLIS
CHALMERS
For Models: 520, 530, 620, 630, 720, 730
A-AF2799R
Center Link Pin
DEUTZ
0.65 Lbs.
A-R70183
Center Link Body
5.6 Lbs.
Dim/Info:
1.00"-10 UNS RH/LH Thrd
15.250" Long
For Models: 520, 530, 620, 630, 720, 730
A-AF2798R
Center Link End
5.96 Lbs.
A-AT19795
Center Link End (Front)
MASSEY
FERGUSON
WHITE/
OLIVER
3.6 Lbs.
Dim/Info:
1.00"-10 LH Acme Thrd
A-AT19796
For Models: 520, 530, 620, 630, 720, 730
A-AF2873R
Center Link Body w/ Handle
Center Link End (Hook)
3.3 Lbs.
Dim/Info:
1.00"-10 RH Acme Thrd
11.000" Long
1" I.D. Ball Dia.
A-T22008
For Models: 520, 530, 620, 630, 720, 730
A-AR21917R
Center Link End, Rear (Cat. II)
8.5 Lbs.
Center Link Handle
CNH
CASE-IH
0.9 Lbs. FORD / NEW
HOLLAND
6.45 Lbs.
FIAT
For Models: 2030, 2630, (2440, 2640 ALL SN 341000>), (300B, 301A, 302,
302A, 401B, 401C ALL SN 362025>), 401D W/ TELESCOPING DRAFT LINKS
For Models: 520, 530, 620, 630, 720, 730
A-AL67290
Top Link
12 Lbs.
A-AR34208
24 Lbs.
Assembly consists of the following items: (1) A-R47524 , (1) A-AR32531 ,
(1) A-AR46298 & (1) A-R42495 .
Dim/Info:
Link Ends Have 1 1/4" Threads
Front Link End Has 7/8" Pin
Hole
For Models: 1040, 1140, (1640, 2040, 2040S, 2140 ALL S/N 430000>), 2150,
2155, 2255, 2350, 2355, 2355N, 2550, 2555, 2750, 2755, 2855N, 940
A-AT20863
15 Lbs.
Assembly consists of the following items: (1) A-T22028 , (1) A-AT19795 ,
(1) A-AT19796 & (1) A-T22008.
A-R47524
Center Link Body
Replaces: R26811
7.7 Lbs.
Dim/Info:
1.125"-7 UNC LH/RH Thrd
10.750" Long
A-T22028
Center Link Body
5.8 Lbs.
Dim/Info:
1.00"-10 UNS RH/LH Thrd
13.250" Long
A-AT19795
Center Link End, Rear (Cat. II)
Center Link Handle
8.2 Lbs.
Dim/Info:
15.250" Length
1.250"-7 RH UNC Thrd
Hole Size: 1.000"
3.3 Lbs.
A-R42495
0.9 Lbs.
4.7 Lbs.
Dim/Info:
1.125"-7 LH UNC Thrd
9.750" Long
.875" Pin Hole Dia.
A-AR46298
Dim/Info:
1.00"-10 RH Acme Thrd
11.000" Long
1" I.D. Ball Dia.
A-T22008
3.6 Lbs.
Dim/Info:
1.00"-10 LH Acme Thrd
A-AT19796
A-AR32531
Center Link Handle
BELARUS
BOBCAT
JCB
JOHN
DEERE
KUBOTA
LANDINI
LEYLAND
LONG
McCORMICK
OTHER
RENAULT
SAME
0.6 Lbs.
For Models: 2510, 2520, 3020, 4030, 4230, 4020 SN <250000, 4000 SN
001000>
VALTRA
VERSATILE
YANMAR
For Models: 301, 401, 1020, 1520, 2020, (300B, 302A, 401C ALL IND SN
<362024), (2440, 2640 ALL SN <340999), (301A, 302, 401B ALL SN <362024),
401D W/ NON TELESCOPING DRAFT LINKS
ZETOR
SCHWARTZ
SPEECO
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
133
A-AR30830
22 Lbs.
A-AR34209
26 Lbs.
Assembly consists of one of each of the following items: A-R51524 , AAR50643 , A-AR61659 & A-R42495 .
AGCO
Dim/Info:
Link Ends Have 1 3/8" Threads
Front Link End Has 1" Pin Hole
ALLIS
CHALMERS
DEUTZ
A-R47524
Center Link Body
7.7 Lbs.
WHITE/
OLIVER
A-AR26527
Center Link End
Dim/Info:
1.375"-8 UNC LH/RH Thrd
12.250" Long
5.65 Lbs.
A-AR50643
A-AR46298
CASE-IH
Center Link Handle
6.38 Lbs.
Dim/Info:
1.375"-8 LH UNC Thrd
8.500" Long
1" Dia. Hole
A-AR61659
A-R42495
8.2 Lbs.
CNH
7.9 Lbs.
10.1 Lbs.
Dim/Info:
1.375"-8 RH UNC Thrd
0.6 Lbs.
FORD / NEW A-AR26527
HOLLAND
Center Link End
5.65 Lbs.
A-AR67880
Center Link Pivot Pin
1 Lbs.
BELARUS
A-R80052
Center Link Body
Replaces: R66299
A-R53762
Hook, Center Link
A-R47067
Center Link Body
0.24 Lbs.
JOHN
DEERE
LANDINI
7.36 Lbs.
For Models: 4250, 4255, 4450, 4455, 4440 SN 013167>
For Models: 2510, 2520, 3020, 4000, 4020, 4030, 4230, 500, 500A, 600
For Models: 2510, 2520 SN 022001>, 3010, 3010 SN 150001>, 4010, 4020 SN
250001>, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440,
4450, 4455, 4650, 4850
A-RE44560
A-R42495 handle is included in kit but not pictured.
26.49 Lbs.
6.14 Lbs.
Dim/Info:
10.750" Long
1.375"-8 LH & RH Thread
JCB
KUBOTA
0.6 Lbs.
For Models: 4430, 4455 MEXICO, 4040 SN <002862, 4240 SN <006627, (3020,
4000, 4020, 4230, 4320 ALL W/ 18.4-38, 20.8-34 OR 23.1-30 REAR TIRES)
FIAT
BOBCAT
A-R42495
Center Link Handle
Replaces: R27007
For Models: (4000, 4020 ALL SN 250001>), 4230 HI-CROP, 4320, 4430 HI-CROP,
4440 SN <013166, 4520 SN 010019>, 4620, 4630 SN <030390, 5020 SN
028137>, 6030, 7020, 7520
A-RE44562
A-R42495 handle is included in kit but not in picture.
23.55 Lbs.
LEYLAND
LONG
McCORMICK
OTHER
For Models: (4000, 4020 ALL SN 250001>), 4230 Hi-Crop, 4240 Hi-Crop SN
<006627, 4320, 4430 Hi-Crop, 4440 Hi-Crop SN <013166
A-RE56211
Center Link End
Implement End
Replaces: AR70496, RE48020
7.8 Lbs.
Dim/Info:
1 3/8"-8 RH Thread
RENAULT
A-AR74181
Tractor End
SAME
Center Link End
8.12 Lbs.
Dim/Info:
1 3/8"-8 LH Thread
VALTRA
A-R47067
VERSATILE
Center Link Body
6.14 Lbs.
Dim/Info:
10.750" Long
1.375"-8 LH & RH Thread
YANMAR
ZETOR
A-R42495
Center Link Handle
Replaces: R27007
For Models: 4440 SN <013166
SCHWARTZ
SPEECO
134
0.6 Lbs.
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
A-R51524
Center Link Body
Replaces: R47887
MASSEY
FERGUSON
A-RE44558
38 Lbs.
Assembly consists of the following items: (1) A-RE44561 , (1) A-RE44559 ,
(1) A-RE50533 & (1) A-R64084
A-RE50533
Center Link Body
Replaces: R107281, R70589, R64083
A-RE43703
Center Link Assembly (Cat III)
24 Lbs.
Consists of the following: (1) A-RE56212 , (1) A-RE56209 , (1) A-R96294 ,
(1) A-R96295 & (1) A-R80436 .
AGCO
ALLIS
CHALMERS
7.8 Lbs.
DEUTZ
A-RE56209
A-RE44561
Center Link End
Rear Link (Implement End)
Center Link End (Implement End) Cat. III
9.5 Lbs.
MASSEY
FERGUSON
WHITE/
OLIVER
12.77 Lbs.
A-R96294
Center Link Body
5.3 Lbs.
A-RE56212
Center Link End (Tractor End)
5.5 Lbs.
Dim/Info:
LH Thread
1.264" Pin Hole
A-RE44559
Center Link End
Front Link (Tractor End)
12.7 Lbs.
CASE-IH
Dim/Info:
RH Thread
1.264" Pin Hole
A-R64084
Handle
CNH
FORD / NEW
HOLLAND
1.23 Lbs.
For Models: 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960,
8100, 8200, 8300, 8400, 8440, 8450, 8640, 8650
A-AR34210
Center Link Assembly Cat III
28 Lbs.
Assembly consists of the following items: (1) A-R80052 , (1) A-RE56211 ,
(1) A-AR74181 & (1) A-R66297
A-R96295
Center Link Lock
A-R80436
Ring
1.6 Lbs.
FIAT
0.03 Lbs.
BELARUS
BOBCAT
JCB
A-RE56211
Center Link End
Implement End
Replaces: AR70496, RE48020
7.8 Lbs.
Dim/Info:
1 3/8"-8 RH Thread
For Models: 7210, 7410, 7420, 7510, 7610, 7710, 7810
A-AR191286
Center Link End
Link End
Handle
JOHN
DEERE
KUBOTA
8.9 Lbs.
8.12 Lbs.
LANDINI
LEYLAND
Dim/Info:
1 3/8"-8 LH Thread
A-R66297
45 Lbs.
For Models: 7720, 7820, 7920, 8120, 8220, 8320, 8420, 8520
A-RE171278
A-AR74181
Tractor End
1.22 Lbs.
For Models: 7720, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300,
8310, 8320, 8400, 8410, 8420, 8520, 8130, 8230, 8230T, 8330, 8330T, 8430,
8430T, 8530
A-R236775
Locking Collar
Replaces: R200367
LONG
McCORMICK
3.91 Lbs.
OTHER
RENAULT
For Models: 4250, 4255, 4450, 4455, 4440 SN 013167>
SAME
A-AL159873
Center Link Complete
18.95 Lbs.
Includes: A-AL159972 , A-AL159971 , A-L156788 & A-L56746
For Models: 7720, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300,
8310, 8320, 8400, 8410, 8420, 8520
A-R154440
For Models: 6110, 6120, 6200, 6210, 6215, 6220, 6300, 6310, 6320, 6400,
6403, 6405, 6410, 6415, 6420, 6500, 6510L, 6510S, 6515, 6520L, 6603, 6605,
6715, 7220, 7320, (6010, 6020, 6100, 6110, 6120, 6200, 6205, 6210, 6215,
6220, 6300, 6310, 6320, 6410, 6420, 6505, 6510, 6515, 6520, 6600, 6610,
SE6010, SE6020, SE6100, SE6110, SE6120, SE6200, SE6210, SE6220, SE6300,
SE6310, SE6320, SE6400, SE6410, SE6420, SE6510 ALL EURO EDITION)
Link Body
VERSATILE
YANMAR
ZETOR
For Models: 7720, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300,
8310, 8320, 8400, 8410, 8420, 8520
SCHWARTZ
SPEECO
A&I PRODUCTS
fax: 1-800-511-0516
VALTRA
8.58 Lbs.
1-800-657-4343
135
A-R200878
Handle, Center Link
2.77 Lbs.
AGCO
A-TLH04 Hydraulic Top Link Cylinder, Cat I Rod/Cat II Base (3" Bore)
17.9 Lbs.
All ports .563"-18 ORB w/ two adapters .563" -18 ORBM X .250" NPTM
90° swivel.
Replaces: Gannon 13-507
ALLIS
CHALMERS
DEUTZ
For Models: 7720, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300,
8310, 8320, 8400, 8410, 8420, 8520, 8130, 8230, 8230T, 8330, 8330T, 8430,
8430T, 8530
Center Link End
17.4 Lbs.
For Models: 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400,
8410, 8420, 8520
A-TLH01
Hydraulic Top Link Cylinder, Cat I (2" Bore)12.3 Lbs.
All ports .563"-18 ORB w/ two adapters .563"-18 ORBM X .250" NPTM
90° swivel.
Dim/Info:
Stroke Length: 8"
Closed Length: 20"
Barrell Length: 12.438"
Rod End Ball I.D.: .750"
Rod End Ball Width1.750"
Base End Ball I.D.: .750"
Base End Ball Width: 1.375"
Base to Ball Ctr Length: 3.500"
CNH
CASE-IH
FORD / NEW
HOLLAND
FIAT
A-TLH02RK
Seal Kit
A-TLH02
Hydraulic Top Link Cylinder, Cat I (2" Bore)
9.5 Lbs.
90° swivel.
Dim/Info:
Stroke Length: 5"
Closed Length: 15"
Barrell Length: 9"
Base End Width: 1.563"
BOBCAT
JCB
JOHN
DEERE
KUBOTA
LANDINI
A-TLH02RK
Seal Kit
0.05 Lbs.
For Models: FITS SEVERAL MODELS Check Dimensions For Your Application
LEYLAND
A-TLH03 Hydraulic Top Link Cylinder, Cat I Rod/Cat II Base (3" Bore)
16.72 Lbs.
LONG
90° swivel.
McCORMICK
Dim/Info:
Stroke Length: 8"
Closed Length: 20"
Base End Ball I.D.: 1"
OTHER
RENAULT
SAME
VALTRA
VERSATILE
A-TLH04RK
Seal Kit
0.07 Lbs.
YANMAR
ZETOR
SCHWARTZ
SPEECO
136
Seal Kit
0.07 Lbs.
A-TLH06
Hydraulic Top Link Cylinder, Cat I (2" Bore)
13.9 Lbs.
90° swivel.
Dim/Info:
Stroke Length: 8"
Closed Length: 24.063"
0.05 Lbs.
BELARUS
A-TLH04RK
A-TLH07
Hydraulic Top Link Cylinder, Cat II (3" Bore)
Port Sizes .750"-16 ORB
18.05 Lbs.
Dim/Info:
Stroke Length: 8"
Closed Length: 21"
Rod End Ball I.D.: 1"
A-TLH05
Hydraulic Top Link Cylinder, Cat II (3" Bore) 21.46 Lbs.
All ports .563"-18 orb w/ two adapters .563"-18 ORBM X .250 NPTM 90°
swivel.
Dim/Info:
Stroke Length: 8"
Closed Length: 26"
Rod End Ball I.D.: 1"
A-TLH08
Hydraulic Top Link Cylinder, Cat I (3" Bore) 13.02 Lbs.
All ports .563-18 ORB w/ two adapters .563"-18 ORBM X .250" NPTM
90° swivel.
Dim/Info:
Stroke Length: 8"
Closed Length: 20"
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
MASSEY
FERGUSON A-RE206750
WHITE/
OLIVER
Dim/Info:
Stroke Length: 8"
Closed Length: 22"
A-VFM3005
Hydraulic Top Link Assembly (Cat ll)
21.19 Lbs.
Dim/Info:
32.677" Max. Operating Length
21.654" Min. Operating Length
11.024" Stroke
65 - 120 Max. HP
A-SLH04 Hydraulic Side Link Cylinder, Clevis Ends (3" Bore) 17.33 Lbs.
90° swivel.
Dim/Info:
Stroke Length: 4"
Closed Length: 23"
Rod End Clevis Hole: .750"
Rod End Clevis Width.750"
Base End Clevis Hole: .750"
Base End Clevis Width: 2"
Base End Clevis Depth: 3"
For Models: FITS SEVERAL MODELS
A-SLH01 Hydraulic Side Link Cylinder, Cat 0 Base End w/ Clevis Rod
End (2" Bore)
9.74 Lbs.
90° swivel.
Replaces: Gannon 13-550, 13-599, 13-604, 13-780
Dim/Info:
Stroke Length: 4"
Closed Length: 15.500",
16.500" & 17.500"
Clevis Rod Width: .750"
Base End Width1.375"
Clevis Holes: 3.875"
A-SLH01RK
Seal Kit
A-SLH03RK
Seal Kit
0.07 Lbs.
A-AR44549
adjusable type
MASSEY
FERGUSON
WHITE/
OLIVER
Complete Lift Link Assembly
12.24 Lbs.
CNH
CASE-IH
For Models: 1010, 320, 330, 40, 420, 430
A-AR44550
non-adjustable type
Seal Kit
Bushing, Hydraulic Side Link
7.58 Lbs.
FORD / NEW
HOLLAND
FIAT
Dim/Info:
Stroke Length: 4"
21.500", 26" & 27.250"
Barrell Length8.437"
Base End I.D.: .750"
Clevis Base.625" Hole, 2"
Width & 2" Depth
.750" Upper Hole, .625" Lower
Holes
0.07 Lbs.
0.01 Lbs.
For Models: 1010, 320, 330, 40, 420, 430
A-AF2714R
A-AF2715R
Arm, Front Pull (RH)
Arm, Front Pull (LH)
22.5 Lbs.
22.5 Lbs.
BELARUS
BOBCAT
For Models: 520, 530, 620, 630, 720, 730
A-AA6610R
Support, Draft Link (LH)
Replaces: A5713R
40.92 Lbs.
A-SLH03
Hydraulic Side Link Cylinder, Cat I Base End/ Clevis
Rod End (3" Bore)
18.61 Lbs.
90° swivel.
Dim/Info:
Stroke Length: 4"
22.500", 26.875" & 28"
Clevis Rod Width: .875"
Clevis Holes.750"
Base End Width: 1.750"
1.750": Base to Ball Ctr Length
JCB
JOHN
DEERE
Seal Kit
DEUTZ
0.05 Lbs.
A-SLH02
Hydraulic Side Link Cylinder, Clevis Ends (3" Bore)
16.71 Lbs.
90° swivel.
A-SLH03RK
ALLIS
CHALMERS
A-SLH02RK
A-BUSH18
AGCO
KUBOTA
LANDINI
For Models: 520, 530, 620, 630
A-AA6609R
Support, Draft Link (RH)
Replaces: A5712R
40.26 Lbs.
LEYLAND
LONG
McCORMICK
For Models: 520, 530, 620, 630
A-AF2793R
Support, Draft Link (LH)
Replaces: F2779R
46.73 Lbs.
OTHER
RENAULT
0.07 Lbs.
SAME
VALTRA
A-AF2792R
Support, Draft Link (RH)
Replaces: F2778R
45.33 Lbs.
VERSATILE
YANMAR
ZETOR
SCHWARTZ
SPEECO
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
137
A-AF2704RKIT
Upper Lift Link Pivot
6.5 Lbs.
A-AR44551
Complete Adjustable Lift Link Assembly
Assembly consist of: A-L28374-17 & A-AR48595
Dim/Info:
17.5" rod length
AGCO
A-L2837417
Housing Assembly w/ all Internal Parts
Used with non-telescoping 3pt pull arms.
ALLIS
CHALMERS
DEUTZ
13.44 Lbs.
Dim/Info:
17.500" long rod
bottom of rod to end
For Models: (520, 530, 720, 730 ALL LH / RH), (620, 630 ALL LH / RH (LH ONLY
ON HI-CROP MODELS))
Upper Yoke
4.1 Lbs.
A-T21901
Ball, Lift Rod
0.64 Lbs.
A-T21559
Handle, Lift Linkage
0.66 Lbs.
A-T21558
Shaft, Housing
0.34 Lbs.
6.5 Lbs.
A-L33535
Housing, Upper
2.94 Lbs.
3.48 Lbs.
A-T22399
Ball
0.28 Lbs.
9.9 Lbs.
A-T32488
A-T21758
Washer
Nut, Adapter
0.34 Lbs.
0.5 Lbs.
A-T25835
Lift Rod
2.82 Lbs.
A-R48595
Lower Lift Casting
5.26 Lbs.
WHITE/
OLIVER
For Models: (520, 530, 720, 730 ALL LH / RH), (620, 630 ALL LH / RH (LH ONLY
ON HI-CROP MODELS))
A-F2676R
Handle
1.06 Lbs.
CNH
CASE-IH
FORD / NEW For Models: 520, 530, 620, 630, (720, 730 ALL SN 7200000>)
Lower Yoke
HOLLAND A-F2670R
FIAT
For Models: 520, 530, (620, 630 ALL EXCEPT HI-CROP), (720, 730 ALL
SN7200000> EXCEPT HI-CROP)
A-M2653T
Fork
BELARUS
BOBCAT
JCB
For Models: 1010
A-CH15627
Lift Link (RH)
JOHN
DEERE
KUBOTA
For Models: 1050 SN <-011000, 850 SN <-016000, 950 SN <-020000
LANDINI
LEYLAND
LONG
For Models: (1040, 1120, 1130, 1140, 1630, 1830, 2120, 2130, 2150, 2255,
940 ALL EURO), (1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2350, 2355,
2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055,
3150, 3155, 3255, 820, 830 ALL USED WITH NON - TELESCOPING 3PT PULL ARMS)
McCORMICK
OTHER
RENAULT
SAME
VALTRA
VERSATILE
YANMAR
ZETOR
SCHWARTZ
SPEECO
138
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
MASSEY A-AF2704R
FERGUSON
8.2 Lbs.
A-AR44552
Complete Adjustable Lift Link Assembly
Assembly consist of: (1) A-L28374-15 , (1) A-R48595
13.14 Lbs.
Dim/Info:
15" rod length
A-L2837415
Housing Assembly w/ all Internal Parts
Used w/ telescoping 3pt pull arms.
A-AR44554 Complete non-Adjustable Lift Link Assembly (LH) 10.34 Lbs.
Assembly consist of: A-T25836 & A-R48595 , used w/ non-telescoping
3pt pull arms.
Dim/Info:
17.5" rod length
7.88 Lbs.
A-T21901
Ball, Lift Rod
0.64 Lbs.
Dim/Info:
15.000" long rod
rod bottom to end
A-T21901
Ball, Lift Rod
0.64 Lbs.
Lift Link Rod, w/ A-T21901 Lift Rod Ball 4.89 Lbs.
Dim/Info:
21.750" overall length
A-T21559
Handle, Lift Linkage
0.66 Lbs.
A-T21558
Shaft, Housing
0.34 Lbs.
A-T22399
A-T32488
A-T21758
Housing, Upper
2.94 Lbs.
Ball
ALLIS
CHALMERS
DEUTZ
A-T25836
A-L33535
AGCO
A-R48595
Lower Lift Casting
MASSEY
FERGUSON
WHITE/
OLIVER
5.26 Lbs.
For Models: 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350,
2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950,
3055, 3150, 3155, 3255, 820, 830
CNH
CASE-IH
A-AR44556
Complete non-Adjustable Lift Link Assembly 9.94 Lbs.
Assembly consist of: A-T24909 & A-R48595 , used w/ telescoping 3pt pull
FORD / NEW
arms.
HOLLAND
Dim/Info:
15" rod length
A-T21901
Ball, Lift Rod
0.64 Lbs.
A-T24909
Lift Link Rod, w/ A-T21901 Lift Rod Ball
FIAT
0.28 Lbs.
Washer
Nut, Adapter
0.34 Lbs.
0.5 Lbs.
4 Lbs.
Dim/Info:
19.125" overall length
A-R48595
Lower Lift Casting
5.26 Lbs.
BELARUS
BOBCAT
JCB
A-T24908
A-R48595
Lift Rod
JOHN
DEERE
2.42 Lbs.
Lower Lift Casting
5.26 Lbs.
For Models: 940, 1040, 1120, 1130, 1140, 1630, 1830, 2120, 2130, 2150,
2255, (1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2350, 2355, 2440,
2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150,
3155, 3255, 820, 830 ALL USED WITH TELESCOPING 3PT PULL ARMS)
For Models: 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350,
2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950,
3055, 3150, 3155, 3255, 820, 830
KUBOTA
A-AF2706R
LANDINI
Lift Link Rod (RH)
5.02 Lbs.
For Models: 520, 530, (620, 630 ALL ALL MODELS EXCEPT HI-CROP), (720, 730
ALL SN7200000> EXCEPT HI-CROP)
A-AF2707R
Lift Link Rod (LH)
4.84 Lbs.
For Models: 520, 530, (620, 630 ALL EXCEPT HI-CROP MODELS), (720, 730 ALL
SN7200000> EXCEPT HI-CROP)
A-R34476
Lift Rod
8.41 Lbs.
Dim/Info:
38 5/16" Long
For Models: 2510 HI-CROP, 3020 HI-CROP S/N < 122999, 4020 HI-CROP S/N <
20099
A-R27712
Lift Rod
LONG
McCORMICK
OTHER
RENAULT
SAME
5.2 Lbs.
VALTRA
For Models: 3010, 3020 S/N <-122999
A-F2671R
LEYLAND
Lock, Float
0.32 Lbs.
VERSATILE
YANMAR
For Models: 520, 530, 620, 630, (720, 730 ALL SN 7200000>)
SCHWARTZ
SPEECO
A&I PRODUCTS
fax: 1-800-511-0516
ZETOR
1-800-657-4343
139
A-B2804R
Spacer, FLoat Lock, (Package of 2)
0.04 Lbs.
Dim/Info:
A-AR44555
Complete Adjustable Lift Link
Assm consist of (1) each of the following parts
Dim/Info:
either RH or LH
AGCO
ALLIS
For Models: 520, 530, 620, 630, (720, 730 ALL SN 7200000>)
CHALMERS
A-F2675R
Collar
DEUTZ
WHITE/
OLIVER
0.04 Lbs.
Dim/Info:
1.625" O.D.
1.135" I.D.
For Models: 520, 530, 620, 630, (720, 730 ALL SN 7200000>)
A-AR44557
A-T13858
A-T13859
Adjusting Handle
Adjusting Shaft
0.52 Lbs.
0.55 Lbs.
A-AR26691
Knuckle
A-R26613
Yoke, Upper
3.74 Lbs.
A-R26611
A-AR26616
Lift Link Rod
Seal
5.56 Lbs.
0.02 Lbs.
A-R26615
Yoke, Lower
6.42 Lbs.
1 Lbs.
16.64 Lbs.
Dim/Info:
.875" hole
A-AR81096
Eyebolt
4.6 Lbs.
A-R51897
A-RE49601
Arrester
Body
0.38 Lbs.
4.18 Lbs.
A-R109978
Lift link
3 Lbs.
A-R109981
Yoke
CNH
CASE-IH
FORD / NEW
HOLLAND
FIAT
4.36 Lbs.
For Models: 3010, 3020, 4010, 4020 SN <-200999
BELARUS
A-R26619
Bushing, Rockshaft Arm
0.29 Lbs.
BOBCAT
JCB
JOHN
DEERE
KUBOTA
For Models: 4030, 4040, 4230, 4430
A-AR44558
16.5 Lbs.
Dim/Info:
1.000" hole
For Models: 600, 3010, 2510 ROW CROP, (3020, 4010, 4020 ALL ROW CROP &
STANDARD), 2010 SN 29001>
A-L26933
A-AR69831
Eyebolt
4.54 Lbs.
A-R51897
A-RE49601
Arrester
Body
0.38 Lbs.
4.18 Lbs.
RENAULT
A-R109978
Lift link
3 Lbs.
SAME
A-R109981
Yoke
Bushing, Draft Link
0.4 Lbs.
LANDINI
LEYLAND
LONG
For Models: 1020, 1030, 1040, 1120, 1130, 1140, 1530, 1630, 2040, 2150,
2155 S/N <-651779, 2240, 2255, 830, 840, 930, 940
A-AT21754
Pin
0.42 Lbs.
McCORMICK
OTHER
4.36 Lbs.
VALTRA
For Models: 300, 301, 400, 401, 1020, 1120, 1130, 1140, 1350, 1520, 1530,
1550, 1630, 1640, 1641F, 1750, 1830, 1850, 1950, 2020, 2030, 2040, 2040S,
2120, 2130, 2140, 2150, 2155, 2240, 2250, 2350, 2355, 2440, 2450, 2550,
2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 301A,
302, 3030, 3040, 3050, 3055, 310A, 3120, 3130, 3140, 3350, 401B, 401D, 820,
830, 840, 920, 930, 940, (300B, 302A, 401C ALL IND), 1840 SN <429999, 1030
A-R54170
Pin, Lower Lift Link
Replaces: R26618
0.44 Lbs.
VERSATILE
For Models: 4050, 4055, 4240, 4250, 4255
YANMAR
For Models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4455, 4230 SN
<-13087, 4430 SN <-17613, 4030 SN <-6719
ZETOR
SCHWARTZ
SPEECO
140
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
MASSEY
FERGUSON
18.3 Lbs.
A-R26608
Washer, Pull Arm Front
0.42 Lbs.
Used w/ pins A-R26609 , AR93639, AR93640, AR35774, AR60295 &
A-R53558 .
A-AR28570
Pull Arm, Rear Half
16.32 Lbs.
AGCO
ALLIS
For Models: 300, 301, 400, 401, 500, 500A, 1020, 1520, 1530, 2010, 2020,
CHALMERS
2030, 2240, 2440, 2510, 2520, 2630, 2640, 300B, 301A, 3010, 302, 302A, 3020,
DEUTZ
401B, 401C, 401D, 4030, 4230, 820, 830, (4000, 4020 ALL SN 201000>), 2040
SN 350000>
For Models: (2510, 2520, 3020 ALL HI-CROP ONLY), 2955, 3040, 3050, 3055,
3140, 3150, 3155, 3255, 3350, 3640, 3650, 4010, 4020, 4040, 4040S, 4050,
4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455,
4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, 600, 700A
A-AT30150
Front Half of Lower RH Pull Arm
Replaces: AT22632
A-AT30151
Front Half of Lower LH Pull Arm
A-AL24137
Pull Arm, rear half
16.8 Lbs.
20.92 Lbs.
MASSEY
FERGUSON
WHITE/
OLIVER
20.96 Lbs.
For Models: 1040, 1140, 1550, 1630, 1640, 1750, 1840 <429999, 1850, 1950,
2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755,
2850, 2855, 940
A-AR90082
Pull Arm Latch
0.78 Lbs.
CNH
For Models: 300, 301, 400, 401, 1020, 1120, 1520, 1530, 1630, 2010, 2020,
2030, 2040, 2240, 2440, 2630, 2640, 301A, 302, 401B, 820, 830, (300B, 302A,
401C ALL IND)
A-F2693R
Pin, Pull Arm
CASE-IH
A-AL26679
A-AL26678
FORD / NEW
HOLLAND
0.56 Lbs.
Dim/Info:
Diameter .703"
Length 7.190"
Shank Diameter .50"
For Models: 300, 301, 400, 401, 500, 1020, 1040, 1140, 1520, 1530, 2010,
2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750,
300B, 301A, 3010, 302, 302A, 3020, 4000, 401B, 401C, 401D, 4030, 4230, 940,
500A S/N <-123113, 4020 S/N 201000->
26.48 Lbs.
26.38 Lbs.
For Models: 2840, 2940, 2950, 2955, 3040, 3055, 3120, 3140, 4000, 4020,
4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4455, (2510, 2520, 3020 ALL
HI-CROP), (4040S, 4240S ALL SN <347554), (3030, 3130 ALL SN 166430>)
A-L26941
Bushing, Draft Link
0.56 Lbs.
BELARUS
For Models: 1640, 1830, 1840, 2020, 2030, 2040, 2040S, 2120, 2130, 2140,
(2350, 2550, 2750 ALL S/N <-529511), 2840, 2940, 2950 S/N <-531761, 3030,
3040, 3120, 3130, 3140
A-AR77530
Heavy Duty Pull Arm, Cat II
Replaces: AT19849
20.6 Lbs.
Dim/Info:
Used either RH/LH
33.5" Center to Center
For Models: 940, 1040, 1120, 1130, 1140, 1550, 1640, 1750, 1840 <429999,
1850, 1950, 2030, 2040, 2040S, 2130, 2140, 2240 SN 350000>, 2250, 2350,
2355, 2440 SN 341000>, 2450, 2550, 2555, 2640 SN 341000>, 2650, 2750,
2755, 2850, 2855, 300B, 301A, 302, 302A, 401B, 401C, 401D
A-AR32548
Replaces: AR27242
A-AR32547
Replaces: AR27241
FIAT
BOBCAT
JCB
JOHN
DEERE
KUBOTA
LANDINI
24.04 Lbs.
24.12 Lbs.
For Models: 301, 400, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240,
2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855, 301A,
302, 401B, 401D, 820, 830, (300B, 302A, 401C ALL IND)
A-R26609
Pin, Front Pull Arm
1.36 Lbs.
LEYLAND
LONG
McCORMICK
For Models: 3010, 4010 STD, ROW CROP, HI-CROP, 4050 SN 1000-6509 HI-CROP,
4250 SN 1000-> HI-CROP, 4320, 4520, 4620, 5010, 5020 025000>, 6030, 7020,
(2510, 2520, 3020, 4000, 4020, 4230, 4240, 4255, 4430, 4440 ALL HI-CROP)
For Models: 500, 2510, 2520, 3010, 3020, 4030, 500A SN <123113
A-AF2716R
Rear Pull Arm (RH/LH)
16.18 Lbs.
A-R53558
Pin, Front Pull Arm
Replaces: R42452
1.44 Lbs.
For Models: 520, 530, 620, 630, 720, 730
A-AT56648
Lower Pull Arm, Cat I
Replaces: AT19857, AT28057
Lock Plate, Draft Link End
RENAULT
SAME
VALTRA
For Models: 4040, 4230, 4240, 4320, 4430, 4455
A-R127161*
OTHER
0.77 Lbs.
VERSATILE
20.88 Lbs.
YANMAR
ZETOR
For Models: 1020, 2040 SN <-349999, 300B, 301A, 302, 302A, 401B, 401C,
820, 830, 300, 301
For Models: 7200, 7210, 7400, 7405, 7410, 7600, 7610 SN <089999, 7630,
7700, 7710 SN <089999, 7720, 7730, 7800, 7810 SN <089999, 7820, 7830,
7920, 7930
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
SCHWARTZ
SPEECO
141
A-AL27203
Support, Front Drawbar
3.82 Lbs.
A-AR33911
Support, Drawbar
Used w/ A-RE20663 & R80843 drawbars.
26 Lbs.
AGCO
For Models: 820, 830, 840, 920, 940, 1020, 1030, 1040, 1120, 1130, 1140,
ALLIS
CHALMERS 1350, 1520, 1530, 1550, 1630, 1640, 1641F, 1750, 1830, 1840, 1950, 1950N,
DEUTZ
2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255,
2350, 2355, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750,
2755, 2850, 2855N, 300B, 301A, 302, 302A, 401B, 401C, 401D
For Models: 600, 4000, 4020, 4040, 4040S, 4230, 4320, 4430, 4455
0.18 Lbs.
WHITE/
OLIVER
CNH
CASE-IH
Support, Rear Drawbar
13.5 Lbs.
For Models: 6800, 6900, 7200, 7210, 7400, 7410, 7420, 7505, 7510, 7515,
7520, 7600, 7610, 7700, 7710, 7800, 7810
For Models: 1020, 1120, 1140, 1350, 1520, 1530, 1550, 1640, 1641F, 1750,
1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2140, 2150, 2155,
2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2550, 2555, 2630, 2640,
2650, 2650N, 2750, 2755, 2850, 2855N, 300B, 301A, 302, 302A, 401B, 401C,
401D, 820, 840, 920, 940, 1840 <429999, (1130, 1630, 1830, 2130, 830, 930,
1030 ALL 248260>)
A-T21677
Rear Drawbar Support
6.76 Lbs.
FORD / NEW
HOLLAND For Models: 1140, 1350, 1640, 1830, 1840, 1850, 1850N, 1950, 1950N, 2030,
FIAT
A-L76091
A-R31438
Bushing, Front Drawbar Support Mounting Pin
Replaces: R27325
For Models: 500, 600, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040,
4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455,
(500A, 500C ALL IND)
A-R26503
Pin, Front Drawbar Support Dowel
Support, Drawbar (LH)
4.75 Lbs.
0.38 Lbs.
Dim/Info:
3.000" Long
.750" Dia.
2040, 2040S, 2130, 2140, 2150, 2155, 2250, 2255, 2350, 2355, 2355N, 2450,
2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N, 840, 940
A-AT12347
0.2 Lbs.
For Models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050,
4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455
A-AR44189
Pin, Front Drawbar
Replaces: AR32826
1 Lbs.
BELARUS
BOBCAT
A-AT12346
Support, Drawbar (RH)
4.75 Lbs.
JCB
For Models: 2510, 2520, 3020, 4000, 4020, 4030 SN <007442, 4230 SN
<015452, 4320 Early SN, 4430 SN <021269, 500, 500A, 500C SN <192951, 600
JOHN
DEERE
A-R40557
KUBOTA
LANDINI
LEYLAND
Bushing, Upper Front Drawbar Pin
A-AR83603
82 Lbs.
This is the bracket only. Must order the following bushings separately: (1)
A-R31438 (1) A-R40557 (1) A-R40558 (2) A-R71476 .
For Models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050,
4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455
LONG
A-R40558
Bushing, Lower Front Drawbar Pin
RENAULT
0.1 Lbs.
Dim/Info:
1.565" O.D.
1.031" I.D.
McCORMICK
OTHER
0.1 Lbs.
Dim/Info:
1.565" O.D.
1.283" I.D.
For Models: 4020 SN 201000>, 4040, 4230, 4320, 4430
A-AR76096
72 Lbs.
This is the bracket only. Must order the following bushings separately: (1)
A-R31438 (1) A-R40557 (1) A-R40558 (2) A-R71476 .
For Models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050,
4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455
A-R95612
SAME
Bushing, Drawbar
0.1 Lbs.
Dim/Info:
1.360" O.D.
1.107" I.D.
VALTRA
VERSATILE
YANMAR
A-R64751
Rear Drawbar Support
8.99 Lbs.
For Models: 6405, 6415, 6605, 6615, 6800, 6810, 6820, 6900, 6910, 6910S,
6920, 6920S, 7200, 7210, 7400, 7405, 7410, 7420, 7505, 7510, 7515, 7520,
7600, 7610, 7700, 7710, 7720, 7800, 7810, 7815, 7820, 7920
ZETOR
For Models: 4050E, 4055, 4250, 4250E, 4255, 4350, 4440, 4450, 4455
SCHWARTZ
SPEECO
142
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
MASSEY
A-L31849
Adapter, Front Drawbar Pin
FERGUSON Used w/ A-L32016 front drawbar pin
A-AR96599
Includes Pins
Bracket, Drawbar Rear Support (RH)
14.11 Lbs.
A-L29020
Drawbar w/ 2.250" Offset
(3) .781" dia. holes @ 1.125", 2.750", & 8.578" from front.
32 Lbs.
Dim/Info:
36.625" long
2.500" wide
1.250" high
A-L32016
For Models: 4050E, 4250 SN: 006249 >, 4250E, 4255, 4350, 4440, 4450 SN:
011780 >, 4455
A-AR96600
Includes Pins
Bracket, Drawbar Rear Support (LH)
Pin, Front Drawbar
AGCO
ALLIS
CHALMERS
0.39 Lbs.
MASSEY
FERGUSON
14.44 Lbs.
For Models: 1020, 1520, 1530, 1640, 1830, 1840, 2020, 2030, 2040, 2130,
2140, 2240, 2250, 2350, 2355, 2440, 2450, 2550, 2555, 2630, 2640, 2650,
2750, 2755, 2850, 2855, 820, 830
For Models: 4050E, 4055, 4250 SN: 006249 >, 4250E, 4255, 4350, 4440, 4450
SN: 011780 >, 4455
A-R121788*
Strap, Spacer; Front Drawbar Support
A-R130982*
A-R61126
Drawbar, Straight
(3) .781" dia. holes @ 1.125", 2.750", & 8.578" from front.
A-L32016
Pin, Front Drawbar Support
Pin, Front Drawbar
WHITE/
OLIVER
30.66 Lbs.
Dim/Info:
36.750" long
2.500" wide
1.250" high
0.35 Lbs.
For Models: 7630, 7720, 7730, 7820, 7830, 7920, 7930, 8100, 8100T, 8110,
8110T, 8120, 8120T, 8130, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8230,
8230T, 8300, 8300T, 8310, 8310T, 8320, 8330, 8330T, 8400, 8400T, 8410,
8410T, 8420, 8430
DEUTZ
CNH
CASE-IH
0.39 Lbs. FORD / NEW
HOLLAND
FIAT
1.7 Lbs.
For Models: 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2350, 2355, 2440,
2550, 2555, 2630, 2640, 2750, 2755, 2855, 401D, 820, 830, (300B, 302A, 401C
ALL IND SN 249301>), (301A, 302, 401B ALL SN 249301>)
A-T28014
38 Lbs.
(4) 1.016" dia front holes @ 1.062", 2.687", 6.187" & 7.812" from
front.
For Models: 8100T, 8110, 8110T, 8120, 8120T, 8200T, 8210, 8210T, 8220,
8220T, 8300T, 8310, 8310T, 8320, 8320T, 8400T, 8410, 8410T, 8420, 8420T,
(8100, 8200, 8300, 8400 ALL SN 010000>)
A-R130953*
Bushing, Front Drawbar Support
Dim/Info:
40.875" long
2.500" wide
1.375" high
0.8 Lbs.
A-L37225
Pin, Front Drawbar
BELARUS
BOBCAT
JCB
0.71 Lbs.
JOHN
DEERE
KUBOTA
For Models: 8100T, 8110, 8110T, 8120, 8120T, 8200T, 8210, 8210T, 8220,
8220T, 8300T, 8310, 8310T, 8320, 8320T, 8400T, 8410, 8410T, 8420, 8420T,
(8100, 8200, 8300, 8400 ALL SN 010000>)
A-T29898
Drawbar, Straight
(3) .796" dia. holes @ 1.250", 2.880" & 8.690" from front.
LANDINI
25 Lbs.
Pin, Front Drawbar
LEYLAND
A-L61510
46.24 Lbs.
LONG
(5) 1.010" dia holes @ 1.420", 3.790", 9.410", 11.220", & 15.600"
from front.
McCORMICK
Dim/Info:
36.750" long
2.000" wide
1.250" high
A-L32016
For Models: 2840, 2940, 2950, 2955, 3030, 3040, 3050, 3120, 3130, 3140,
3150, 3350, 3640, 3650, 3155 SN <632321
Dim/Info:
49.250" long
2.500" wide
1.370" high
0.39 Lbs.
A-L37225
Pin, Front Drawbar
OTHER
RENAULT
0.71 Lbs.
SAME
For Models: 820, 830, 840, 920, 940, 1020, 1030, 1040, 1120, 1130, 1140,
1350, 1550, 1630, 1750, 1950, 2020, 2150, 2155, 2255, 2355N
A-T29899
Hammerstrap, Drawbar
VALTRA
4.52 Lbs.
Dim/Info:
.75" thick
For Models: (2955, 3055, 3155, 3255, 3650 ALL SN 632322->)
VERSATILE
YANMAR
ZETOR
For Models: 1020, 1250, 1450, 1530, 1650, 2010, 2020, 2030, 2040, 2150,
2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, 2750,
2755, 2855N, 5105, 5200, 5205, 5210, 5220, 5300, 5310, 5320, 5320N, 5400,
5410, 5420, 5420N, 5500, 5510, 5520, 5520N, 820, 830
SCHWARTZ
SPEECO
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
143
A-R27692
31 Lbs.
(4) .765" dia. holes @ 1.440", 2.440", 7.440", & 12.690" from front.
Replaces: R27909
Dim/Info:
45.000" long
2.000" wide
1.250" high
AGCO
ALLIS
CHALMERS
A-AR38256 Pin, Front Drawbar (used on 2510 & 2520)
0.47 Lbs.
A-R80842
Drawbar w/o Hammer Strap Holes
Same as A-RE20663 except no hammer strap holes.
0.45 Lbs.
A-R56728
CNH
CASE-IH
Pin, Front Drawbar
0.78 Lbs.
For Models: (2510, 2520 ALL ROW CROP), 3010 ROW CROP, STD, RC UTIL,
ORCHARD
A-R81576
39 Lbs.
(6) 1.010" dia holes @ 1.060", 2.310", 4.360", 7.050", 9.050", &
12.300" from front.
FORD / NEW
HOLLAND
For Models: 4000, 4020, 4030, 4040, 4230, 4320, 4430
A-R80842SPL
Drawbar w/o Offset, Straight
FIAT
A-R56728
A-AR27599
Pin, Front Drawbar
41.4 Lbs.
Dim/Info:
45.000" long
2.500" wide
1.375" high
Dim/Info:
44.750" long
2.500" wide
1.250" high
Pin, Front Drawbar
0.78 Lbs.
0.92 Lbs.
BELARUS
BOBCAT
JCB
JOHN
DEERE
A-RE20662
39.98 Lbs.
(6) 1.010" dia holes @ 1.060", 2.310", 4.360", 7.050", 9.050", &
12.300" from front.
Replaces: R28057, R34288
Dim/Info:
44.750" long
2.500" wide
1.250" high
KUBOTA
LANDINI
LEYLAND
For Models: 4000, 4020, 4040, 4230, 4320, 4430
For Models: 500C IND, (2510, 2520, 4000, 4020, 4030 ALL W/ HD HI-CROP),
(3020, 4010 ALL W/ HD ROW CROP, STD-WIDE SWING, / HD HI-CROP)
A-R56728
Pin, Front Drawbar
SAME
0.78 Lbs.
For Models: 4240S, 4350, 4455 CAT III NARROW ABOVE W/ WIDE SWINGING
DRAWBAR, 4255 HI-CROP W/CAT II, CAT III NARROW, W/ WIDE SWINGING DRAWBAR,
(4050, 4240, 4250, 4440, 4450 ALL W/ WIDE SWINGING DRAWBAR), 4055 W/CAT II
For Models: 4020, 4000 HI-CROP, 4030 RC, 3010 RC / STD WIDE-SWING, 2520 RC
WIDE-SWING, 2510 RC WIDE-SWING, HI-CROP, 4010 RC, STD, RC / STD WIDE-SWING,
HI-CROP, 3020 RC, STD, RC UTIL, ORC
A-RE20663
41.5 Lbs.
(6) 1.015" dia front holes @ 1.375", 2.625", 4.687", 7.345", 9.325", &
12.590" from front.
Replaces: R34448
Dim/Info:
45.000" long
2.500" wide
1.375" high
VALTRA
VERSATILE
YANMAR
Pin, Front Drawbar
0.78 Lbs.
McCORMICK
RENAULT
Dim/Info:
45.625" long
3.000" wide
1.500" high
A-R56728
LONG
OTHER
A-R61184
56 Lbs.
(4) 1.031" dia. Holes @ 1.656", 2.963",5.532", & 8.581" from front.
A-R56728
Pin, Front Drawbar
A-R61184SPL
Drawbar, Straight
56 Lbs.
Dim/Info:
45.620" Long
3.000" Wide
1.500" Thick
For Models: 4055 W/CAT II, 4240S, 4350, (4050, 4240, 4250, 4440, 4450 ALL
W/ WIDE SWINGING DRAWBAR), 4255 HI-CROP W/CAT II, CAT III NARROW, W/ WIDE
SWINGING DRAWBAR, 4455 CAT III NARROW ABOVE W/ WIDE SWINGING DRAWBAR
0.78 Lbs.
ZETOR
SCHWARTZ For Models: 4000, 4020, 4040, 4230, 4320, 4430
SPEECO
144
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343
Pin, Front Drawbar (used on 3010)
41.78 Lbs.
Dim/Info:
45.000" long
2.500" wide
1.375" high
WHITE/
OLIVER
A-AR26415
8.38 Lbs.
Dim/Info:
12.875" long
2.5" wide
1" thick
For Models: 600, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040,
4230, 4320, 4430, 4455, 4630
DEUTZ
MASSEY
FERGUSON
A-R26584
A-R36608
(2) 1.312" dia. holes @ 2.130" & 5.380" from front.
79 Lbs.
Pin, Front Drawbar
1.39 Lbs.
For Models: 4520, 4620, 4630, 5010, 5020, 6030, 7520
A-R50984
(2) 1.312" dia holes @ 2.730" & 4.540" from front.
93 Lbs.
Pin, Front Drawbar
1.39 Lbs.
A-R105240
Drawbar
A-L79895
Spacer, Drawbar Hammerstrap
For Models: 4050E, 4055, 4250, 4250E, 4255, 4350, 4440, 4450, 4455
A-R62081
(2) 1.312" dia. front holes @ 1.812" & 4.312" from front.
96 Lbs.
3.12 Lbs.
Dim/Info:
4.75" long
1.75" high
1.50" wide
1.68 Lbs.
Spacer, Drawbar
DEUTZ
MASSEY
FERGUSON
WHITE/
OLIVER
CNH
CASE-IH
FORD / NEW
HOLLAND
BELARUS
BOBCAT
JCB
JOHN
DEERE
For Models: 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220,
6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6400, 6400L, 6405, 6410,
6410L, 6410S, 6415, 6420, 6500, 6510L, 6510S, 6605, 6615, 6715, 7220, 7320
A-L76092
ALLIS
CHALMERS
FIAT
For Models: 6100, 6110, 6110L, 6120, 6120L, 6200, 6210, 6210L, 6215, 6220,
6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6400, 6400L, 6405, 6410,
6410L, 6410S, 6415, 6420, 6500, 6500L, 6506, 6510L, 6510S, 6600, 6605,
6615, 6715, 7220, 7320
For Models: 4050, 4240, 4250, 4440, 4450, 4520, 4620, 5010, 7020, 7520,
5020 S/N 250000->
Spacer, Drawbar Rear Support
5 Lbs.
Dim/Info:
9.50" Long
2.25" Wide
1.00" Thick
12.66 Lbs.
AGCO
45 Lbs.
Dim/Info:
45.00" Long
2.50" Wide
1.50" Thick
For Models: 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215,
6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6400, 6400L, 6405,
6410, 6410L, 6410S, 6415, 6420, 6500, 6500L, 6510L, 6510S, 6605, 6615,
6715, 7220, 7320
For Models: 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520
A-R64753
18.46 Lbs.
Dim/Info:
22.62" Long
2.50" Wide
1.25" Thick
For Models: 5105, 5200, 5205, 5210, 5220, 5300, 5310, 5310N, 5320, 5320N,
5400, 5400N, 5410, 5420, 5420N, 5500, 5500N, 5510, 5510N, 5520, 5520N,
5615, 5715
A-L78501
A-R78214
Used w/ A-R36608 , A-R50984 , A-R61184 , A-R51771
Replaces: RE19375, AR35912, AR74170, AR35912
25 Lbs.
A-L114953
Drawbar
Replaces: L78996, L114167
Dim/Info:
63.250" long
3.000" wide
1.750" high
A-R62760
Drawbar, Offset
Dim/Info:
29.50" Long
2.50" Wide
1.25" Thick
For Models: 5105, 5200, 5205, 5210, 5220, 5300, 5310, 5310N, 5320, 5320N,
5400, 5400N, 5410, 5420, 5420N, 5500, 5500N, 5510, 5510N, 5520, 5520N
Dim/Info:
63.250" long
3.000" wide
1.500" high
A-R62760
A-R133359
2.95 Lbs.
KUBOTA
LANDINI
LEYLAND
Dim/Info:
63.375" long
3.000" wide
1.750" high
LONG
McCORMICK
A-R62760
Pin, Front Drawbar
1.39 Lbs.
For Models: 7200, 7210, 7400, 7410, 7505, 7510, 7515, 7600, 7610, 7700,
7710, 7800, 7810
A-L115073
Drawbar
Replaces: R113145, L76093
For Models: 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960
A-R80447
Used w/ A-R50984 & A-R62081 drawbars.
Replaces: RE19377, AR53877
12.6 Lbs.
For Models: 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840,
4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430, 8630
RENAULT
Dim/Info:
43.81" Long
3.00" Wide
1.50" Thick
For Models: 6800, 6810, 6820 W/O Power Shift Transmission, 6900, 6910, 6910S,
(6920, 6920S ALL W/O Power Shift Transmission), 7420, 7520
A-L76093
Drawbar
Replaces: R113145
53 Lbs.
Dim/Info:
43.81" Long
3.00" Wide
1.50" Thick
For Models: 7200, 7210, 7400, 7405, 7410, 7505, 7510, 7600, 7610, 7710,
7800, 7810
A&I PRODUCTS
fax: 1-800-511-0516
OTHER
53 Lbs.
1-800-657-4343
SAME
VALTRA
VERSATILE
YANMAR
ZETOR
SCHWARTZ
SPEECO
145
A-R130638
Drawbar
94 Lbs.
Dim/Info:
57.75" Long
AGCO
3.00" Wide
2.00" Thick
ALLIS
For Models: 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T,
CHALMERS 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410,
8410T, 8420, 8420T
DEUTZ
A-R171367
Drawbar
128 Lbs.
WHITE/
OLIVER
MASSEY
FERGUSON
Dim/Info:
57.75" Long
4.00" Wide
2.25" Thick
For Models: 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T,
8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410,
8410T, 8420, 8420T, 8520, 8520T
A-RE69232*
Drawbar Assembly; Reversible, 50.8 MM 102 Lbs.
CNH
CASE-IH
FORD / NEW
For Models: (8100, 8200, 8300, 8400 ALL SN <009999)
HOLLAND
FIAT
A-49A303
3-pt Hitch
176 Lbs.
Cat. I/II (NOTE: If tractor is a S/N <561903, B <186134, and G <18700,
then a later model drawbar support bracket must be installed.)
BELARUS
BOBCAT
JCB
For Models: 50, 60, A, B, G
A-49A304
3-pt Hitch, FD
Cat. I (Fixed 26" spacing)
66 Lbs.
JOHN
DEERE
KUBOTA
LANDINI
For Models: M, MT
LEYLAND
LONG
McCORMICK
OTHER
RENAULT
SAME
VALTRA
VERSATILE
YANMAR
ZETOR
SCHWARTZ
SPEECO
146
A&I PRODUCTS
fax: 1-800-511-0516
1-800-657-4343

Catalog: Tractor Parts - John Deere

Transcription

Similar documents

225 Hydraulikteile