Raytech

Raytech INDUSTRIES
For more than 45 years, Raytech Industries, a division of Lyman Products Corporation, has been serving industry, science, and craftsmen. In more recent years, we have enhanced this tradition by meeting the demands of
industrial users and professional craftsmen while continuing to serve the needs of the hobbyist. Our commitment
to manufacturing excellence – a commitment to all who work in the markets we serve – is found within the pages
of this catalog.
Through strong and innovative engineering, Raytech is clearly the leader in today’s demanding marketplace.
Raytech products are sold through specialized distributors around the world. We are confident in the superior
quality of our products and would like to instill some of this confidence in the people who use them. For further
details, or if you have questions, please call our Customer Service Department.
THE LYMAN / RAYTECH
MANAGEMENT TEAM
J Mace Thompson . . . . . . . . . . . . . . . . . . . . . . . . . . . . .President
Tom Heffron . . . . . . . . . . . . . . . . . .President, Raytech Division
Tom Andersen . . . . . .Vice President, Finance & Administration
Nancy Modehn . . . . . . . . . . .Customer Service/Export Manager
RAYTECH
“GUARANTEE OF SATISFACTION”
At Raytech, our goal is to provide
products of the highest possible
quality to all of our customers.
Our “Guarantee of Satisfaction”
applies to every product that
carries our name. If a customer
buys a product that does not
meet our high quality standard,
we will repair or replace it at no
charge.
Tim McNabola . . . . . . . . . . . . . . . . . . . . .Engineering Manager
Jim Mesick . . . . . . . . . . . . . . . . . . . . . .Manufacturing Engineer
Pat Andersen . . . . . . . . . . . . . . . . . . . . . . . . . . . .Credit Manager
Elizabeth Friedmann . . . . . . . . . . . . . . . . . . . . .Graphic Design
Customer Service Hours 9:00am-4:30pm ET
Toll Free Tel: 1-800-243-7163
Local Tel: 860-632-2020 ext 324
Email: [email protected]
If you are unable to locate a distributor in your area or
have difficulty obtaining product, please go to our
website at: www.raytech-ind.com
RAYTECH • 475 Smith St., Middletown, CT 06457
www.raytech-ind.com
ULTRAVIOLET
Light
MAKING THE INVISIBLE VISIBLE
Ultraviolet is the name of a range of light
(energy) having a wavelength shorter than the
visible light detectible by the human eye.
While ultraviolet is invisible, it causes many
substances to fluoresce (glow) in a variety of
colors that are visible to the human eye. The
ability to make the invisible visible is what
makes ultraviolet lamps so valuable for mineral prospecting, criminal investigation, postage
stamp evaluation, and a host of other applications ranging from sanitation to medicine. The
chart illustrates UV’s range of wavelengths in
the electromagnetic spectrum.
THE ELECTROMAGNETIC SPECTRUM
WAVELENGTH IN NANOMETERS (MILLIGRAMS)
.01
GAMMA
RAYS
10
X-RAYS
400
700
10,000
ULTRAVIOLET
VISIBLE SPECTRUM
INFRARED
MICRO
WAVE
Shortwave ultraviolet produced by low
pressure mercury arc (254) Nanometers
When properly filtered, Longwave or UVA ultraviolet includes radiations that lie just below the visible
spectrum in the range of about 315-400 mm. Midwave
Longwave Ultraviolet
(320-400) Nanometers
Midwave
(312) Nanometers
or UVB ultraviolet lies in the range of 280-315 mm.
Shortwave or UVC ultraviolet is 257 mm.
Versalume™
CAUTION: Be very careful to limit exposure of
your eyes to shortwave ultraviolet rays. These rays can
“sunburn” the eyes and cause uncomfortable irritation. You
should not look into a shortwave lamp when it is turned on.
When working near a shortwave lamp, we recommend the
wearing of protective glasses. Longwave ultraviolet normally does not irritate the eyes, but we would not recommend staring into an ultraviolet lamp any more than we
would recommend staring into any other light.
4 WATTS
THE MOST VERSATILE
AND POWERFUL
PORTABLE ULTRAVIOLET LAMP ON THE
MARKET TODAY. USE WITH BATTERIES
OR 115V A/C ADAPTER
The Versalume™ series offers a lightweight compact construction designed for use with four AA batteries or with a 115V
A/C adapter. This popular portable boasts 33% more UV output than competitive models as well as incorporating Raytech’s
exclusive lifetime filters. Philatelic models include view box.
Includes The Story of Fluorescence. Shipping weight is 2
pounds. CE
Raytector 5-2
12 WATTS
OFFERS BOTH A/C OPERATION
AND BATTERY POWER FOR
PORTABLE USE.
Raytector portables have an internal
rechargeable lead acid battery eliminating
replacements. One full 24-hour charge provides 5 to 7 hours of battery operation. All
models are equipped with built-in chargers
that plug into wall outlets for intermittent or
continuous charging. These dual tube models
can operate with either one or both tubes
simultaneously. Single tube operation
extends battery life while double tube operation substantially
increases the output intensity to a full 12 watts. Each lamp
comes with Raytech’s exclusive lifetime filters and A/C
adapter. Shipping weight is 6 pounds. CE
PP-FLS Longwave/Shortwave (115V/60 Hz) . . . . . . . . . . .10-020
230V/50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-012
Replacement Tube –
Longwave/Shortwave (6 x 5/8”/152 x 16mm) . . . . . . . . . . .11-062
PP-FS Shortwave (115V/60 Hz) . . . . . . . . . . . . . . . . . . . . .10-022
Replacement Tube – Shortwave (6 x 5/8”/152 x 16mm) . .11-053
PP-FL Longwave (115V/60 Hz) . . . . . . . . . . . . . . . . . . . . .10-024
Replacement Tube – Longwave (6 x 5/8”/152 x 16mm) . .11-070
Philatelic Use Only
Longwave/Shortwave with View Box (115V/60 Hz) . . . . .10-021
Longwave (115V/60 Hz) . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-026
Shortwave (115V/60 Hz) . . . . . . . . . . . . . . . . . . . . . . . . . . .10-028
AC Adapter (6 Volt) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .05081
R5-FLS Longwave/Shortwave (115V/60 Hz) . . . . . . . . . . .10-062
230V/50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-066
Replacement Filter – Longwave . . . . . . . . . . . . . . . . . . . . .11-030
Replacement Filter – Shortwave . . . . . . . . . . . . . . . . . . . . .11-031
Replacement Tube – Shortwave (9 x 5/8”/228 x 16mm) . .11-054
Replacement Tube – Longwave (9 x 5/8”/228 x 16mm) . . .11-071
R5-FS Shortwave (115V/60 Hz) . . . . . . . . . . . . . . . . . . . . .10-063
230V/50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-067
Replacement Filter – Shortwave . . . . . . . . . . . . . . . . . . . . .11-043
NOTE: 230V/50 Hz models are not for A/C operation.
AC Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .05000
www.raytech-ind.com
100
The Story of
Fluorescence
An engaging 52-page booklet explaining
the story of fluorescence with a guide to
applications in mineralogy and an outline for industrial and scientific use.
Includes 22 pages of fluorescent mineral
identifications. . . . . . . . . . . . . . . . .12-022
3
Ultrviolet LIGHT
Model 4
4 WATTS
The LS-4 continues to be the most popular lamp in the Raytech
Compact Ultraviolet line today. This compact, low cost lamp
offers everything one can expect and is simple to use. It is also
featured as our “Select-O-Wave” model that contains a sliding
wavelength selector, allowing you to use longwave, shortwave
or both simultaneously from the same tube. Includes The Story
of Fluorescence. Shipping weight is 1-1/2 pounds. CE
Model 88 Superstar
6 WATTS, EACH WAVELENGTH
This model features Raytech’s exclusive lifetime filter. Every
fluorescence examination performed is simplified and
enhanced with this versatile and easy-to-use lamp. An intense
flood of longwave or shortwave ultra-violet is yours at the flick
of a switch. (Note they cannot be used together.) Each wavelength delivers 6 watts, the output of two ordinary lamps. It is
manufactured with an anodized brushed aluminum housing
with a convenient carrying strap for easy handling. If you’re
looking for the best compact hand-held LW/SW light, this is it!
Includes The Story of Fluorescence. Shipping weight is 3-1/2
lbs. CE
LS-4CB Longwave/Shortwave (115V/60 Hz) . . . . . . . . . . .10-074
230V/50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-075
Replacement Tube –
Longwave/Shortwave (6 x 5/8”/152 x 16mm) . . . . . . . . . . .11-062
Replacement Filter –
Longwave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .05192
Replacement Filter –
Shortwave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .05194
LS-88CB Longwave/Shortwave (115V/69 Hz) . . . . . . . . . .10-106
230V/50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-107
Replacement Tube –
Longwave (9 x 5/8”/228 x 16mm) . . . . . . . . . . . . . . . . . . . .11-071
Replacement Tube –
Shortwave (9 x 5/8”/228 x 16mm) . . . . . . . . . . . . . . . . . . . .11-054
Replacement Filter –
Shortwave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-043
HOW DO I TELL SHORTWAVE AND
LONGWAVE APART:
Model 7
Shortwave tubes are clear.
Longwave tubes are frosted.
4 WATTS, EACH WAVELENGTH
The compact, easy-to-use lamp that offers everything for complete lab and educational use; also a favorite with mineral collectors and philatelists. The LS-7 is actually two independent
lamps in one case. It has two momentary switches for both
shortwave and longwave to be on. Includes The Story of
Fluorescence. Shipping weight is 2 pounds. CE
Shortwave filters are smooth and polished.
Longwave filters are rippled.
LS-7CB Longwave/Shortwave (115V/69 Hz) . . . . . . . . . . .10-082
230V/50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-083
Replacement Tube –
Longwave (6 x 5/8”/152 x 16mm) . . . . . . . . . . . . . . . . . . . .11-070
Replacement Filter –
Longwave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-033
Replacement Tube –
Shortwave (6 x 5/8”/152 x 16mm) . . . . . . . . . . . . . . . . . . . .11-053
Replacement Filter –
Shortwave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-034
RAYTECH • 475 Smith St., Middletown, CT 06457
PLEASE NOTE: In the event your UV lamp should
require a new filter, and if you purchased any of these
models before 2000, please contact Customer Service for
the correct part number, as filters for these models were
changed in 2000 and will not fit older models.
4
www.raytech-ind.com
ULTRAVIOLET
Light
Display Model 218
30 WATTS (15 WATTS EACH TUBE)
Longwave/shortwave model has two 15 watt tubes and a 3-inch
by 15” filter area for brilliant displays. At 18 inches, it covers a
2-foot by 4-foot display area. The LS-218CB has separate longwave and shortwave tubes and filters. Separate switches permit
separate or combined wavelength selection. The full 30 watts
covers a 3-foot by 5-foot display area at 20 inches. Shipping
weight is 7 pounds. CE
Raytech View Box
Use the Raytech View Box for convenient, light-shielded fluorescent examination. It is ideal for classroom and scientific use
in chromatography and mineral inspection and also for identification of stamps, dyes and chemicals. Lamp can be easily
removed for separate use. 24” x 12” x 12”. Shipping weight is
7 pounds.
LS-218CB Longwave/Shortwave (115V/69 Hz) . . . . . . . . .10-110
230V/50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-111
Replacement Tube –
Longwave (18 x 1”/457 x 25mm) . . . . . . . . . . . . . . . . . . . . .11-073
Replacement Filter –
Longwave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-026
Replacement Tube –
Shortwave (18 x 1”/457 x 25mm) . . . . . . . . . . . . . . . . . . . .11-056
Replacement Filter –
Shortwave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-042
LW-218CB Longwave Only (115V/69 Hz) . . . . . . . . . . . . .10-112
230V/50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-113
Replacement Filter –
Longwave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-028
SW-218CB Shortwave Only (115V/69 Hz) . . . . . . . . . . . .10-114
230V/50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-115
Replacement Filter –
Shortwave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-044
VB-7 (for use with the LS-7 lamp) . . . . . . . . . . . . . . . . . . . .12-014
VB-8 (for use with the LS-88 lamp) . . . . . . . . . . . . . . . . . . .12-015
VB Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-041
(Durable plastic adapter allows easy conversion of the view box
for use with the Raytector 5-2)
ULTRAVIOLET APPLICATIONS
DYES AND MARKERS
Automotive and industrial leak detection,
DNA enhancement dyes
Fingerprint enhancement powders,
Ground and surface water tracers
Invisible criminal tagging dyes,
Theatrical make-up and staging
Invisible personal property identification markers
Postal stamp inks,
Social event admission stamp markers
LOCATION AND IDENTIFICATION
Raytech UV Glasses
Forgeries and repairs of artwork, antiques,
and collectibles
Fungi, ringworm, bacteria, urine, and spermatozoa
Pollutants and arson accelerants; rodent control
Scorpions and other anthropoids and insects
Valuable ores, minerals, gems, and hydrocarbons
Raytech feels safety is always top priority. Our clear 100% UV protection safety
glasses shield your eyes from UV light
with no reduction in visibility.
Clear Safety Glasses . . . . . . . .12-023
UV RADIATION AS A TOOL
Adhesive curing,
DNA and other molecular bond breakdown
Sanitation and germicidal
www.raytech-ind.com
5
Diamond SAWS
Thousands of satisfied customers can attest to the fact that we
probably produce the best all-around lapidary saw in the
market today. With the power feed it slabs smoothly and
consistently. It has built-in features demanded by professionals.
The lift-out sump is quickly and easily cleaned; the ball bearing arbor is precisely aligned, shielded and lubricated for life;
positive hold down on the crossfeed helps prevent blade damage; the crossfeed handle moves the vise exactly 1/16” per turn
for gauging slab thickness; and the clear hood helps contain oil
mist. The 10-inch model has an infeed rate of 10 inches per
hour. The saw is designed for positive slabbing and the vise
assembly swings away for easy trimming. A one-third horsepower motor is standard and is available in 115v/60Hz or
230v/50Hz.
B A S I C S AW S
L-6S
6-INCH
Basic model includes pop-up table, lift-out sump, ball bearing
arbor, and arbor pulley. (Does not include motor.) Shipping
weight is 14 pounds (1.03 cubic feet) . . . . . . . . . . . . . . .20-012
Arbor Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-019
Blade Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .06115
Coolant Baffle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .06156
Sump Liner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-017
AL-P10S
10-INCH
Jem Saw 45
Deluxe model
includes basic
machine, power
feed, 1/3 hp motor,
motor base, belt
guard, plexiglass
hood, splash guard,
and 10” x .040 x
5/8” Green Blazer
blade.
Machine is 12” x 14” x 31”. Shipping weight is 73 pounds
(4.81 cubic feet).
4 OR 5-INCH
SLICE GEMS,
TRIM SLABS
FASTER AND
EASIER.
ALL THESE
FEATURES
IN ONE
POWERFUL SAW:
115V/60 Hz/6.6 amp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-023
230V/50 Hz/3.3 amp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-018
Arbor Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-031
Belt Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-028
Coolant Baffle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .06083
Guide Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .06087
Half Nut Assembly (Brass) . . . . . . . . . . . . . . . . . . . . . . . . .20-032
Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-029
Main Motor (115V/60 Hz) . . . . . . . . . . . . . . . . . . . . . . . . . .30-203
Powerfeed Complete (115V/60 Hz) . . . . . . . . . . . . . . . . . .20-026
Powerfeed Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30-211
Powerfeed Screw & Coupling . . . . . . . . . . . . . . . . . . . . . . .06064
Sump Liner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-030
Vise & Carriage Assy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .06013
• High-torque motor (60 in-oz)
- Won’t stall in normal use.
• Versatile machine accepts either 4-inch or 5-inch blade.
• Fast and quiet - 5,000 rpm, better cutting, longer blade life.
• “On-center” trimming allows maximum accuracy even
with difficult shapes like crosses.
• Drop edge table eliminates interference on slab cuts.
• Vise or trim table attaches in 2 seconds - and in alignment.
• Innovative guard design - for slab cuts of any length.
• Gemstone glides into cut on exclusive stainless steel table.
• Convenient lift-out sump liner for easy cleaning.
• Front splash shield included. (Not shown).
• Optional Lamp.
Jem Saw comes with 5" x 012 x 5/8" Yellow Blazer Blade.
Shipping weight is 16 lbs. (1.09 cu. ft.)
B A S I C S AW S
115V/60 Hz/1.0 amps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-037
230V/50 Hz/.5 amps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-001
Blade Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .07388
Blade Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .07376
Clamp Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .07365
Motor (115V/60 Hz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30-208
Splash Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .07390
Sump Liner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .07391
Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .07374
Toggle Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .05912
Moffet Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31-036
Lamp-Mounting Hardware . . . . . . . . . . . . . . . . . . . . . . . . .31-037
L-10S
10-INCH
Basic model includes lift-out sump, ball bearing arbor, arbor
pulley, blade guard, splash guard and precisely aligned vise.
(Does not include motor.) Shipping weight is 35 pounds (2.67
cubic feet) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-025
RAYTECH • 475 Smith St., Middletown, CT 06457
6
www.raytech-ind.com
BLAZER Blades
WHICH IS THE BEST RAYTECH
DIAMOND BLADE FOR YOU?
New Improved Designs
THE BEST BLADES IN THE
BUSINESS ARE EVEN BETTER
The best blade for a given application depends on such factors as:
1. Value of the material as it relates to kerf loss.
2. Production volume to be cut.
3. Cutting characteristics of material: hard stone; tends to glaze the rim (agate,
jade); abrasive soft stone tends to wear away the rim (sandstone, novaculite).
4. What coolant is required (oil or water).
5. Equipment characteristics such as rpm and type of power feed.
Blade
Black Blazer
Item No
Diameter
33-374
10
Core
X
.040
What the numbers mean:
Kerf
X
.052
Arbor
X
5/8
Arbor w/
Bushing
X
1/2
Listed below are
the styles and
descriptions.
The Yellow Blazer
The Yellow Blazer is a diamond rich, free cutting blade that is
manufactured in the conventional sintered continuous rim
design. It is similar to Black except for finer diamond on thinner core. Yellow is designed for thin kerfs that are suitable for
thin cuts on valuable materials such as turquoise, jade, opal,
etc. This blade cuts these materials freely, even with water
coolant. It is useful in production trimming of boules of synthetic gem materials. Where long life is required, the Yellow
Blazer is recommended over competitive plated blades.
Available in sizes 4” to 14”
The Black Blazer
The Black Blazer is similar to the Green
except that it has a heavier concentration of coarse diamond recommended
for heavier service in a diameter up to
14 inches. It now has a clear UV traceable protective outer coating the “diamond rich” formulation provides longer
life and better overall economy in many
operations. Available in sizes 6” to 14”.
BLACK BLAZER
YELLOW BLAZER
ITEM NO.
4 x 012 x 020 x 5/8 x 1/2 . . . . . . . . .33-030
4 x 016 x 023 x 5/8 x 1/2 . . . . . . . . .33-031
5 x 012 x 020 x 5/8 x 1/2 . . . . . . . . .33-032
5 x 016 x 023 x 5/8 x 1/2 . . . . . . . . .33-033
6 x 012 x 015 x 5/8 x 1/2 . . . . . . . . .33-034
6 x 012 x 020 x 5/8 x 1/2 . . . . . . . . .33-035
6 x 016 x 023 x 5/8 x 1/2 . . . . . . . . .33-036
8 x 023 x 031 x 5/8 x 1/2 . . . . . . . . .33-037
10 x 031 x 038 x 5/8 x 1/2 . . . . . . . .33-038
12 x 031 x 042 x 5/8 x 1/2 . . . . . . . .33-039
14 x 039 x 042 x 5/8 x 1/2 . . . . . . . .33-040
ITEM NO.
6 x 031 x 044 x 5/8 x 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-364
8 x 031 x 044 x 5/8 x 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-368
10 x 040 x 052 x 5/8 x 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . .33-374
12 x 050 x 070 x 1 x 3/4 x 5/8 . . . . . . . . . . . . . . . . . . . . . . .33-380
14 x 050 x 070 x 1 x 3/4 x 5/8 . . . . . . . . . . . . . . . . . . . . . . .33-385
www.raytech-ind.com
7
Blade ACCESSORIES
The Green Blazer
The Green Blazer has notched construction on a steel core with standard concentration of coarse diamond. It is an
economical blade for general lapidary
use that provides smooth, free cutting
performance both in slabbing and trimming. For greater blade life, use Black
Blazer. For thinner cuts in valuable material, use Yellow Blazer.
Available in sizes 6” to 24”
GREEN BLAZER
ITEM NO.
6 x 025 x 031 x 5/8 x 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-208
6 x 031 x 044 x 5/8 x 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-210
8 x 025 x 031 x 5/8 x 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-214
8 x 031 x 044 x 5/8 x 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-216
10 x 031 x 044 x 5/8 x 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . .33-222
10 x 040 x 052 x 5/8 x 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . .33-224
12 x 040 x 060 x 1 x 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-229
12 x 047 x 060 x 1 x 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-231
14 x 051 x 067 x 1 x 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-235
16 x 059 x 088 x 1 x 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-239
18 x 059 x 088 x 1 x 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-243
20 x 071 x 098 x 1 x 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-249
24 x 071 x 098 x 1 x 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-252
Rayspan Drums
MADE WITH RESILIENT RUBBER
Angled expansion slots through the heavy rubber rim allow the
drum to expand when rotated, thereby locking the finishing belt
in place. Belts can be quickly changed merely by stopping the
machine and slipping off the old belt and sliding on the new
one. In use, the resilient drum surface flexes to the gemstone’s
contour to quickly remove grinding flats—yet the convex drum
concentrates the cutting action so that scratches are quickly
removed even from flat surfaces. Rayspan drums are made
from a specially developed rubber compound which is soft,
resilient and durable. Each drum is supplied with telescopic
bushings to fit shafts 1/2", 5/8", 3/4" or 1" diameter.
6 x 1-1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31-026
6 x 2-1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31-025
8 x 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31-023
Aluminum Oxide
Blade
Dressing Block
Grain size and hardness matches
to the specific task of dressing
Raytech Blazer Blade. Blades
are typically restored after
approximately 10 square inches
of sharpening. Block measures
2" x 2" x 6" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-017
Pella Oil
FOR BLADE LUBRICATION
Pella oil is the correct formulation for maximum diamond
blade protection when cutting stone, ceramic or masonry. It is
not water soluble.
Raycool
1 gallon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-007
A convenient water additive which contains wetting agents and
corrosion inhibitors. Add to water coolant for grinding with
diamond wheels and when trimming materials cut in water.
Dilute 30:1. Also useful for diamond sawing soft
fluorescent minerals since it does not fluoresce.
CAUTION: The machines and tools described in this
catalog are potentially dangerous if improperly used.
Please be sure to operate them only at recommended speeds
with proper guards installed, and while wearing adequate eye
protection.
1/2 pint dispenser bottle . . . . . . . . . . . . . . . . . . . . . . . . . . .40-001
1 gallon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-002
RAYTECH • 475 Smith St., Middletown, CT 06457
8
www.raytech-ind.com
DIAMOND Jem
Diamond Jem
THE ULTIMATE CABBING MACHINE
Economy, durability and convenience are engineered into this
machine, and it includes the right lineup of Dimafast metal
bonded diamond wheels and True Circle™ Diamond Bands on
6” x 1-1/2” expandable drums for the fastest, highest quality
production of a wide variety of gemstones. A spin disc is provided for alternative polishes. There is ample space between
wheels so that hearts and crosses may be cut with ease.
True Circle™ diamond bands combine performance and economy. Not only do these resin bonded diamond bands cut and
smooth very quickly, they are also inexpensive to use since you
just replace the band, which slips over the expandable drum –
no need to buy a whole new wheel.
• Tough, heavy gauge aluminum housing
• Stainless steel shaft for corrosion resistance
• Channeled pan for contamination protection
• Rayspray Coolant System
• 6” x 1-1/2” 100 and 600 Grit Dimafast Wheels
• 6” x 1-1/2” 325 and 1200 Grit True Circle™ Diamond Bands
• 14,000 Rez Polishing Belt & compound for recharging it
• Motor
• Lamp
• Spin disc and end covers
Diamond Jem comes complete and ready to run.
Shipping weight is 52 pounds (3.9 cubic feet)
Diamond Jem (115V/60 Hz) . . . . . . . . . . . . . . . . . . . . . . . .20-082
Export Model (230V/50 Hz) . . . . . . . . . . . . . . . . . . . . . . . .24-090
Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .02569
Motor (115V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30-213
Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .05835
Spitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .07267
Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .05909
Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .07251
Moffet Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31-036
Lamp-Mounting Hardware . . . . . . . . . . . . . . . . . . . . . . . . .31-037
Rayspray Coolant System
Spin Discs
This is a complete self-contained system that can be retro-fitted
to just about any grinding or sanding machine. The Rayspray is
a convenient, inexpensive way to update machinery now using
pressure or drip water systems. Less than a half inch of water is
needed in the grinding machine’s pan to make the Rayspray
function. 30 inches of tubing allows the Rayspray Coolant
pump to be conveniently located out of the way. Includes
pump, brass head and tubing.
For shafts end-tapped 1/4”-20. Either right or left hand. Spin
on, spin off – fast, for the quick easy change of
finishing discs. A separate Spin Disc for each grit saves time
and eliminates contamination. 6-inch diameter Spin Discs have
a machined hub and 3/16” thick sponge cover. The 1/4”-20 center screw threads into the end of shaft with threaded hole.
6-inch Right-Hand Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . .31-002
6-inch Left-Hand Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31-003
Spin Disc Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31-001
115V Rayspray System . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-024
230V Rayspray System . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-030
www.raytech-ind.com
9
Diamond PRODUCTS
Dimafast Diamond
Grinding Wheels
True Circle™ Diamond Bands
TECHNOLOGY ADVANCEMENTS HAVE
PRODUCED SUPERIOR TRUE CIRCLE
DIAMOND BANDS
THE WAY TO GO IN
DIAMOND
These durable plated diamond
wheels replace silicon carbide
grinding wheels and give longer
lasting life, faster cutting and
complete freedom from bumping
and grooving. Each wheel is provided with bushings to fit arbor
sizes 1/2”, 5/8” and 3/4”. Wheel
arbor
hole
is
standard
1-inch.
In gemstone finishing, the sanding steps are critical if you
want to obtain the finest polish. An ideal sanding medium will
a) remove grinding scratches and flats quickly and effectively;
b) give consistently high performance over a long life; and c)
be economical. We believe that no product currently available
can compare to True Circle™ diamond products in these three
areas. The cutting rate is remarkably fast and remains that way.
The finish coming from the 1200 is a lustrous pre-polish (very
close to a polish on some hard stones). While the initial purchase price is higher than traditional silicon carbide abrasives,
True Circle™ diamond products are less expensive to use over
their expected lifetime.
Wheel Size 60
6" x 1-1/2" –
8" x 1-1/2" –
True Circle™ diamond bands offer greater lifetime economy
and versatility than anything else on the market. You get True
Circle™ performance in a band that slips on and off an
expandable drum. At replacement time, there is no need to buy
the entire wheel – just the band. Plus, you can change grit in
seconds by slipping
off one band and
replacing it
with another.
80
50-102
50-111
GRIT
100
180
50-103 50-104
50-112 50-113
220
360
600
50-105 50-106 50-107
50-114 50-115 50-116
Diamond
Texture X
Grinding Wheels
WHEN FAST
MAXIMUM STOCK
REMOVAL IS
IMPORTANT
These wheels are fast cutting due to a construction
process that maintains an
interrupted surface. This
improves coolant flow and
swarf removal.
Size
280
(Purple)
6" x 1-1/2" 55-116
6" x 2-1/2" 55-128
8" x 3"
55-152
325
(Brown)
55-117
55-129
55-153
600
(Red)
55-118
55-130
55-154
1200
(Blue)
55-119
55-131
55-155
8000
(Cream)
55-121
55-133
55-145
Wheel Size
6" x 1-1/2"
8" x 1-1/2"
80
50-150
50-160
GRIT
100
180
50-151
50-152
50-161
50-162
220
50-153
50-163
360
50-154
50-164
TIP FOR PROPER USE: More is not better
Relative Cutting Rate (Brazilian
Agate) at approximately the
half-way point in the life of
each.
Diamond abrasives are today’s state-of-the-art method
of finishing. Diamond products appear more costly than
conventional finishing methods utilizing carbide and
oxide polishes; however, diamond provides longer life
while producing faster, smoother, and overall superior
results. Many people believe that the more diamond
abrasive applied to a surface, the better the results. In
truth, an even dispersal of abrasive is the key to superior
finishing, not a greater quantity. Therefore, do not
attempt to “pile on” diamond abrasive. The results you
achieve will be disappointing.
Relative amount of Brazilian
Agate ground away per retail
dollar invested.
RAYTECH • 475 Smith St., Middletown, CT 06457
10
www.raytech-ind.com
LAPIDIARY Accessories
Cabochon Waxes
Rechargeable Diamond
Rez Discs and Belts
HIGH TEMPERATURE BLACK WAX
A popular black formulation also marketed as “Bankers #6”
and “Jewelers Cement”. Softens at 170°F.
Four sticks (5/8” x 5/8” x 10”) per 1 lb. pkg. . . . . . . . . . .32-003
Effective carriers for diamond compound and spray. The resin
impregnated fabric locks diamond particles in place from compounds or sprays for quick, high quality finishing or gemstones
without water.
STANDARD GREEN WAX
Rez Discs (3/Pk.) with pressure sensitive adhesive
6" Rez Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-015
8" Rez Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-017
Rez Belts (3/Pk.) for use on expandable drums
6 x 1-1/2” Rez Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-001
6 x 2-1/2” Rez Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-002
8 x 3” Rez Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-004
Provides good adhesion for general lapidary work. Softens
at 150°F.
Four sticks (5/8" sq. x 10") 1/4 lb. per 1 lb. pkg. . . . . . . .32-002
Faceting Waxes
DIAMOND DOP
This is the high performance tenacious wax used by diamond
cutters. Resists flow under pressure. Will often hold stones for
preforming when any other wax will fail. Softens at 175°F.
Polishing Discs
Stick 1/2" diameter x 4" long. . . . . . . . . . . . . . . . . . . . . . .32-005
12-Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-006
LEATHER DISCS
Premium chrome tanned
top grain is highest quality, pliable, medium-soft
leather
3/32"
thick.
Excellent for general polishing.
6-inch Leather . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-027
8-inch Leather . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-028
FACET WAX
This brown wax is an exceptionally adhesive high shellac content dop wax preferred by many faceters. Softens at 145°F.
Each pack contains four sticks
3/8" square x 4" long. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-004
HARD FELT DISCS
A proven polishing surface that is especially recommended for
glass, opal, agate and other materials that don’t undercut.
6-inch Hard Felt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-015
8-inch Hard Felt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-016
SPONGE DISCS
Electronic Digital Caliper
Useful as a resilient backer for other discs.
6-inch Sponge Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-009
8-inch Sponge Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-010
Our Electronic Digital Calipers are constructed of durable
stainless steel. They measure in either inches or millimeters and
are accurate to .02mm/.001” with resolution to .01mm/.005”.
6-inch Caliper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7832218
Electric Hot Dop
Jewelry
Makers Scale
The Raytech Hot Dop features an
anodized aluminum base with a builtin longer life cartridge heater. It is
smaller yet provides a greater warmup area and a larger wax well than our
previous models.
Covers all the craftsman’s ordinary measuring needs. Stainless
steel with etched graduations for permanent visibility. Includes
6" scale graduated in 1/16", 150mm scale graduated in mm,
sheet gauge, ring shank gauge, and a bracelet gauge. It shows
metal length required for bracelets to fit any wrist size.
Hot Dop 115V/60 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31-098
(Not available in 230V model)
www.raytech-ind.com
Jewelry Makers Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68-001
11
Faceting LAPS
Dimafast F
NuBond™
THE GREATEST ADVANCE IN FACET LAPS
SINCE ELECTRO- BONDING
Grit
180
260
360
600
1200
NuBond is the outstanding pre-polish facet lap. A NuBond lap
requires little, if any, break-in to produce smooth finishes.
Compared to an electrobond lap, it will scratch less and will cut
more consistently over a longer service life.
Multilayer NuBond laps have a higher concentration of friable,
self-sharpening diamond bonded directly to a solid aluminum
backer. NuBond laps are precise and true running, lightweight
and corrosion resistant.
The preferred electro-bond diamond disc for preforming
and cutting in large
facets. The channeled
construction
provides
exceptionally fast cutting
action while improving
coolant flow and swarf
removal. Use Dimafast F
when heavy cutting or
fast cutting is desired.
6" (150mm) Disc
50-040
50-041
50-042
50-043
50-044
8" (200mm) Disc
50-046
50-047
50-048
50-049
50-050
Fast Lap
Important: To replace an electrobond lap, select a NuBond that
is one grit coarser than the electrobond. Even though coarser,
NuBond will scratch and chip less and, most important, it will
still be cutting steadily after the electrobond slows to a crawl.
Color
Brown
Red
Blue
Grit
325
600
1200
6" Disc
(150mm)
50-073
50-074
50-075
8" Disc
(200mm)
50-083
50-084
50-085
Replaces
Electrobonded
Grit
600
1200 & 1500
3000
A most versatile polishing lap, especially useful with diamond
polishes. Fine metal particles embedded in a tough resin binder
provide the diamond holding properties of metal with the
grooving resistance of a reinforced resin structure. The microscopically interrupted surface eliminates any need for scoring
and reduces the tendency to scratch. The Fast Lap is most
effective when used with Raytech Diamond Spray in combination with Raytech Thinner (see page 13). Also useful with
oxide polishes.
Dimafast P
This is the long time
favorite among cutters for general use.
These high quality
electro-bond laps give
good performance in
the coarse grades and
provide a fine prepolish in the finer
grades. All Raytech laps are solid aluminum and precision
ground to assure flatness. For more consistent performance in
a polish lap, consider Raytech NuBond.
6” Fast Lap (150mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49-027
8” Fast Lap (200mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49-028
Tin Lap
A favorite used with a variety of oxide polishes for finishing a
range of gemstones. The Raytech Tin Lap has a heavy layer of
pure rolled tin laminated to a Raytech Master Lap and turned
true.
6” Tin Lap (150mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49-007
8” Tin Lap (200mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49-008
Grit
6" (150mm)Disc
8" (200mm)Disc
100
180
260
600
1200
50-018
50-019
50-020
50-021
50-022
50-026
50-027
50-028
50-029
50-030
RAYTECH • 475 Smith St., Middletown, CT 06457
Copper Lap
Copper faced with 1/16” of rolled copper laminated to a 1/4”
thick aluminum Master Lap turned true. Traditional lap for
charging with diamond powder.
6” Copper Lap (150mm) . . . . . . . . . . . . . . . . . . . . . . . . . . .49-009
8” Copper Lap (200mm) . . . . . . . . . . . . . . . . . . . . . . . . . . .49-010
12
www.raytech-ind.com
FACETING Laps
Raytech Diamond Drills
Diamond Compound
The practical way to put holes in gemstones, ceramics and glass
without a major equipment investment. Raytech diamond drills
are usable in ordinary drill presses that can reach speeds of at
least 5,000 RPM. All drills come with instructions and tips on
drilling techniques and equipment as well as coolant and RPM
recommendations. 25 and 100 packs are packaged in bulk.
Raytech features Lapcraft brand diamond rich formulation for
all general lapidary use. Available in 5gm syringes. All sizes
are color coded for easy identification. Best used with
Raytech’s Rez Belts & Discs as shown on page 11.
Size
3/4mm
1mm
1-1/4mm
1-1/2mm
2mm
2-1/2mm
25 Pack
51-123
51-124
51-125
51-126
51-127
51-128
MICRON
1/4
1/2
1
3
6
15
30
45
60
100 Pack
51-130
51-131
51-132
51-133
51-134
51-135
Rayspray Diamond Spray
MESH
(100,000)
(50,000)
(14,000)
(8,000)
(3,000)
(1,200)
(600)
(325)
(240)
COLOR
Black
Grey
White
Yellow
Orange
Blue
Red
Brown
Purple
5 GM
53-045
53-046
53-047
53-048
53-049
53-050
53-051
53-052
53-053
Lap Storage Container
A RAYTECH EXCLUSIVE
•WATER BASED
•DIAMOND RICH
•ANTI-COAGULABLE
•2 OUNCE BOTTLE
Finally, an environmentally safe
diamond spray. Raytech offers a
complete line of one hundred percent environmentally safe waterbased diamond sprays. They are
available in a full range of micron/
mesh.
• Raytech Rayspray diamond spray is totally environmentally
safe. It contains no ozone-depleting agents and is
non-flammable.
• Because Rayspray diamond spray is environmentally safe,
it is easily exportable to other countries.
• Rayspray diamond spray has been tested for twelve months
by various master cutters worldwide, cutters who can
testify to its quality and performance.
• It is available with a convenient pump dispenser for proper
diamond dispersion.
Made from high impact polystyrene, these containers safeguard
valuable faceting laps and shield them from contaminants.
These rigid, stackable containers accept 6-inch or
8-inch laps.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-180
Lap Rack
Rayspray Diamond 1/4 Mic. (100,000 Mesh) . . . . . . . . . .53-180
Rayspray Diamond 1/2 Mic. (50,000 Mesh) . . . . . . . . . . .53-181
Rayspray Diamond 1 Mic. (14,000 Mesh) . . . . . . . . . . . . .53-182
Nylon coated aluminum
prevents damage to laps.
Rack holds up to six laps
. . . . . . . . . . . . . . .31-001
Thinner/Lubricant
Raytech’s Thinner/Lubricant is a silicon-based extender fluid
especially designed for use with diamond compound and as a
cutting lubricant. It is available in a convenient 4-ounce bottle
with a cap designed for easy dispensing.
4 oz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53-065
www.raytech-ind.com
13
Specialty MACHINES
TV-5 Stone
Finishing Kit
Hustler Vibrating Lap
Thousands of satisfied customers testify to the durability and
simplicity of the Tumble-Vibe 5. Mated with a spare bowl and
a GSH-2 Stone Finishing Kit, this is a must for any beginner.
The kit comes complete and ready to operate with a motorized
base, two bowls, clear lid, two rubber nuts, and all the grits necessary for accomplishing the grinding step through the final
polish step of most gemstones. The four steps that are included
are Silicone Carbide (100/120) – rough grind, Silicone Carbide
(700F) – fine grind, Iolox 50 – pre-polish, and Raybrite TL polish. This dynamic compact system handles many applications.
FOR POLISHING SLABS, CLOCK FACES &
GEODE HALVES
The Raytech Vibrating Lap comes complete with two grooved
aluminum pans, plus bumper rings, a polish pad, and a grit kit
that includes all the abrasives and polish you need to produce
sparkling slabs.
NOTE: You get a 5% to 10% capacity bonus with every
Raytech Vibrating Lap. A 15-inch Raytech lap is 15 inches in
diameter inside where the work is done – not outside as with
laps from other manufacturers. CE
TV-5 Vibratory Tumbler Only (115V/60 Hz) . . . . . . . . . .23-001
TV-5 Vibratory Tumbler Only (230V/50 Hz) . . . . . . . . . .24-106
Extra Bowl, Lid & Stem Assembly . . . . . . . . . . . . . . . . . .23-005
TV-5 Starter Kit (115V/60 Hz) . . . . . . . . . . . . . . . . . . . . . .23-090
TV-5 Starter Kit (230V/50 Hz) . . . . . . . . . . . . . . . . . . . . . .24-101
Hustler 15 Deluxe is the best flat lap value on the market today.
It cuts faster than 10-inch laps and has 2-1/4 times as much
working area. A smoothly sawed slab or geode can be ground
and polished in 3 to 7 days. An adjustable thumbscrew provides
convenient 10-second leveling while the motor is running. The
pan is quickly removable for easy cleaning. Shipping weight is
38 pounds (3.47 cubic feet).
RAYTECH STONE FINISHING KITS FOR BOTH
VIBRATORY OR ROTARY TUMBLING.
Hustler 15D (115V/60 Hz) . . . . . . . . . . . . . . . . . . . . . . . . . .20-161
Export Model (230V/50 Hz) . . . . . . . . . . . . . . . . . . . . . . . .24-067
Each kit will polish 8 to 15 pounds of stones.
GSH-1
Contains 7 steps (including the four listed above) capable of
finishing a variety of both soft and hard stones. Complete with
instructions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35-056
ACCESSORIES
Extra Pan – Grooved Surface . . . . . . . . . . . . . . . . . . . . . . .20-162
Extra Pan – Smooth Surface . . . . . . . . . . . . . . . . . . . . . . . .20-163
Bumper Ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-164
Standard Polish Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-165
GS-L1 Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35-053
(Contains coarse grit, fine grit and Syntin lap compound –
enough material to charge the H-15 6 times)
Motor Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30-206
Vibration Balls (3 Required) . . . . . . . . . . . . . . . . . . . . . . . . .06272
GSH-2
Economical 4-step finishing system (see description above for
further details) designed for polishing agate and similar hard
stones. Not recommended for soft stones.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35-057
TV-5 Metal Finishing Kit
This all-in-one kit offers cutting, pre-polishing and polishing.
It produces superior results on metals including silver, gold,
pewter, bronze, brass, etc. and the 3-step system also contains
the sturdy TV-5 Vibratory Tumbler.
2 lbs. of 1/4" Green Pyramids, 2 lbs. of 1/4" White Pyramids,
1 lb. of Dri-Shine III also includes 2 bowls.
CAUTION: The machines and tools described in this
catalog are potentially dangerous if improperly used.
Please be sure to operate them only at recommended speeds
with proper guards installed, and while wearing adequate eye
protection.
TV-5 Metal Finishing Kit (115V/60 Hz) . . . . . . . . . . . . . . .23-091
TV-5 Metal Finishing Kit (230V/50 Hz) . . . . . . . . . . . . . . .24-100
RAYTECH • 475 Smith St., Middletown, CT 06457
14
www.raytech-ind.com
INDUSTRIAL Machines
To see our complete line of finishing
equipment and medias including
industrial vibratory tumblers and
accessories, please visit our website at:
www.raytech-ind.com
or request our Industrial Catalog
www.raytech-ind.com
15
RAYTECH
The Smart Choice!
A D i v i s i o n o f Ly m a n P r o d u c t s
475 Smith Street,
M i d d l e t o w n , C T. 0 6 4 5 7
Te l : ( 8 6 0 ) - 6 3 2 - 2 0 2 0
Fax: (860 632-1699
If you are unable to locate a distributor in your area or have difficulty
obtaining product, please go to our website at: www.raytech-ind.com