pull - type windrower

Transcription

PULL - TYPE
WINDROWER
MacDon 3000/3020
Westward 3000/3020
Prairie Star 4600/4620
Premier 1900/1920
Harvest Pro 8020
PARTS CATALOG
Form 12903 Issue 05/05
Sugg. Retail: $15.00
Inside Front Cover
(blank)
1
PULL-TYPE WINDROWER PARTS CATALOG
TABLE OF CONTENTS
MAIN FRAME ........................................................................................2, 3
MAIN HITCH GROUP.......................................................................... 4 - 7
30’ & 36’ FRONT HITCH & STABILIZER ASSEMBLY..........................8, 9
SIDE DRAFT CONTROL (ATTACHMENT).......................................10, 11
WHEELS, CASTERS & WHEEL LOCKS ........................................ 12 - 15
MAIN DRIVES – 3000 Series .......................................................... 16 - 19
MAIN DRIVES – 3020 Series .......................................................... 20 - 23
MAIN DRIVES - PTO SHAFT ASSEMBLY .......................................24, 25
KNIFE DRIVE .................................................................................. 26 - 29
CUTTING COMPONENTS ................................................................30, 31
DRAPER DRIVE................................................................................32, 33
36’ DRAPER DRIVE ..........................................................................34, 35
DRAPERS & ROLLERS .................................................................. 36 - 39
36’ ADJUSTABLE DRAPER TRACK ................................................40, 41
REEL DRIVE & REEL SUPPORT ARMS........................................ 42 - 45
36’ CENTER REEL SUPPORT ARM ................................................46, 47
BAT REEL (SERIAL # 82885 AND PRIOR) ............................................48
36’ REEL SHAFTS (SERIAL # 82885 AND PRIOR) ...............................49
BAT REEL (SERIAL # 82886 AND AFTER)......................................50, 51
21’, 25’ & 30’ HYDRAULICS............................................................ 52 - 55
36’ HYDRAULICS..............................................................................56, 57
R/H WHEEL VALVE ................................................................................58
36’ CENTER REEL LIFT CYLINDER ......................................................59
HYDRAULIC SCHEMATICS .............................................................60, 61
ELECTRICAL.....................................................................................62, 63
DECALS & REFLECTORS................................................................64, 65
PAINT ......................................................................................................65
PRODUCT IDENTIFICATION DECALS .......................................... 66 - 68
BELT LISTING.........................................................................................69
NUMERICAL LIST ........................................................................... 70 - 73
SUGGESTED STOCKING LIST........................................................74, 75
ABBREVIATIONS
L/H - left hand (Determined from Operator's position,
facing forward.)
R/H - right hand
I.D. - inside diameter
O.D. - outside diameter
A/R - as required (quantity varies)
REF - reference, part number called up elsewhere in
catalog
NSS - not serviced separately
NC - national coarse thread
NF - national fine thread
NOTE: Common hardware is not illustrated. Alphabetic references are used to designate position and description of
these items.
When ordering, be sure the complete and proper serial number is given. Some parts vary with header size; be sure you
are ordering the correct number for your header.
SERIAL NUMBER BREAKS
The side of the serial number on which the dash (-) appears determines whether the part is used "up to" or "after" the
serial number given.
Example:
-74924
Used on machines up to and including serial number 74924.
74925Used on machines including and after serial number 74925.
BOLDED PART NUMBERS INDICATE REVISIONS OR ADDITIONS SINCE LAST PRODUCTION YEAR.
Form # 12903
Issue 05/05
2
MAIN FRAME
Form # 12903
Issue 05/05
3
MAIN FRAME
REF
PART
NUMBER
1
22
23
REF
32891
32892
32893
31892
152005
29772
29773
29804
29783
29797
32283
32296
152001
32284
32297
152003
31465
21032
29817
29792
29774
29775
29765
29289
29290
29291
32066
29302
29303
32069
29307
29308
A
B
C
D
E
F
J
K
L
M
N
P
Q
21863
21452
19965
21821
21567
18637
21492
18631
18590
20077
18669
30808
21403
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
20
21
DESCRIPTION
z

z

QTY
HEADER - frame, not serviced..................................................................... 1
BAR - guard - repair piece 1500 mm long (5 ft.)
TUBE - back - repair piece 1500 mm long (5 ft.)
CUTTERBAR - repair piece 1500 mm long (5 ft.)
SHIELD - center c/w decal - 21', 25' & 30'.................................................... 1
SHIELD - center c/w decal - 21', 25' & 30'.................................................... 1
DEFLECTOR - L/H ....................................................................................... 1
DEFLECTOR - R/H ...................................................................................... 1
SHOE - L/H................................................................................................... 1
SHOE - R/H (up to Serial No. 56152; also order items 7 & 13)................... 1
DIVIDER - R/H.............................................................................................. 1
SHIELD - left center, 36’ ............................................................................... 1
SHIELD - left center c/w decal, 36’............................................................... 1
SHIELD - left center c/w decal, 36’............................................................... 1
SHIELD – right, 36’ ....................................................................................... 1
SHIELD - right center c/w decal, 36’............................................................. 1
SHIELD - right center c/w decal, 36’............................................................. 1
WASHER.................................................................................................. A/R
SIGN - smv ................................................................................................... 1
DIVIDER - L/H .............................................................................................. 1
ROD – divider, front & rear (up to Ser. no. 56152 also order items 6 & 7) ... 1
CHANNEL - lights......................................................................................... 2
BAR - lights................................................................................................... 1
STAND - lights .............................................................................................. 1
BACKSHEET - L/H, 21' ................................................................................ 1
BACKSHEET - L/H, 25' ................................................................................ 1
BACKSHEET - L/H, 30' ................................................................................ 1
BACKSHEET - L/H, 36' ................................................................................ 1
BACKSHEET - R/H, 21' and 25' ................................................................... 1
BACKSHEET - R/H, 30'................................................................................ 1
BACKSHEET - R/H, 36'................................................................................ 1
SUPPORT – backsheet, L/H ........................................................................ 1
SUPPORT – backsheet, R/H........................................................................ 1
SERIAL
NUMBER
-71960
71961-71960
71961-
5615356153-56152
BOLT – round head, short square neck, 3/8 NC x 3/4 inch
NUT – flange, 3/8 NC
BOLT – round head, square neck, 3/8 NC x 1 inch
BOLT – flange head, 3/8 NC x 3/4 inch
BOLT - hex head, 3/8 NC x 3/4 inch
WASHER - lock 3/8 Nom. I.D.
NUT - flange #10 NC
SCREW – machine, phillips pan head, #10 NC x 1/2 inch
NUT - hex 3/8 NC
BOLT – hex head, 3/8 NC x 1 inch
NUT - lock, 3/8 inch NC distorted thread
SCREW - machine, phillips truss head, 5/16 NC x 3/8 inch
NUT - flange 5/16 NC
z - MacDon 3000, Westward 3000, Prairie Star 4600, Premier 1900
- MacDon 3020, Westward 3020, Prairie Star 4620, Premier 1920, Harvest Pro 8020
Form # 12903
Issue 05/05
4
MAIN HITCH GROUP
Form # 12903
Issue 05/05
5
MAIN HITCH GROUP
REF
1
2
3
4
5
PART
NUMBER
DESCRIPTION
QTY
29565
29536
32088
HITCH - main................................................................................................ 1
PIVOT – cylinder, 3 spring capacity, 21 & 25' .............................................. 1
PIVOT – cylinder, 4 spring capacity, see serial break .................................. 1
103977
31145
30061
29543
32089
PIVO – cylinder, 5 spring capacity: 30 & 36'................................................. 1
WASHER...................................................................................................... 1
PIN – roll, 3/8 dia. x 2 inch............................................................................ 2
PIVOT – spring, 3 spring capacity, 21' & 25' ................................................ 1
PIVOT – spring, 4 spring capacity, see serial break..................................... 1
103912
PIVOT – spring, 5 spring capacity, 30 & 36' ................................................. 1
SERIAL
NUMBER
-115999
30 & 36' -115999
21 & 25' 116000-
116000-
-115999
30 & 36' -115999
21 & 25' 116000-
116000-
NOTE: For 21 & 25' headers Serial No. 115999 and below: When replacing items 2 and/or 5 that
have 3 spring capacity with parts that have 4 spring capacity, also order spacer, item 6.
6
7
8
9
10
11
29550
29003
20312
29555
29556
32391
12
13
32287
29620
14
15
16
17
18
19
20
21
24
25
29638
29639
29020
11460
2146
29642
29646
13125
29743
31482
29533
31488
31492
29891
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
29652
29657
18648
30529
36176
30243
29612
21354
21404
29467
18671
21010
15325
32282
29597
Form # 12903
SPACER (none on 30' or 36') ....................................................................... 2
SPRING - float (30 & 36': qty 4 for S.N.-115999, qty 5 for S.N. 116000-) ... 3
PIN - clevis, 3/4 dia. x 3-1/4 inch .................................................................. 1
PIN – with tapped hole ................................................................................. 1
BOLT - adjusting........................................................................................... 1
HITCH - front (Serial no. 72499 and below; also order jack 36176) ............ 1
(For all 36' and 30’ Australian units with S.N. 124500 and up, see P. 8)
HITCH - inside channel ................................................................................ 1
HITCH - outside channel ............................................................................. 1
(For all 36' and 30’ Australian units with S.N. 124500 and up, see P. 8)
PIN - lock ..................................................................................................... 1
LEVER ......................................................................................................... 1
SPRING - compression ............................................................................... 1
WASHER ..................................................................................................... 1
PIN - roll 1/4 dia. x 1 3/4 lg. (for machines up to S.N. 56152, qty. is 4) ........ 2
PLATE - pin ................................................................................................. 1
PIN - securing .............................................................................................. 1
PIN - hair ...................................................................................................... 2
CHANNEL - long ......................................................................................... 1
CLEVIS – male, header lock ....................................................................... 1
CLEVIS - header lock ................................................................................. 1
CLEVIS – female, header lock ..................................................................... 1
PIN - (qty. 2 up to Serial no. 56152) ............................................................ 1
PIN - hitch (for machines up to & incl. S.N. 68982; also order .................... 1
item 47 & hardware items Q & R)
PIN - R/H hitch ............................................................................................. 1
PIN - L/H hitch ............................................................................................. 1
PIN - cotter, 3/16 dia. x 1-1/4 inch. ............................................................... 1
JACK - snap ring mount .............................................................................. 1
JACK - tube mount ...................................................................................... 1
SNAP - ring .................................................................................................. 1
BAR - flat ..................................................................................................... 1
BOLT – shear, 3/8 NC x 2 inch Gr. 5 ........................................................... 2
CHAIN ......................................................................................................... 1
WASHER ..................................................................................................... 1
FITTING - grease, straight ........................................................................... 3
FITTING - grease, 90° .................................................................................. 1
WASHER ..................................................................................................... 2
HITCH - plate (holes in line) - for tractors without clevis drawbar ................ 1
HITCH - plate (center hole out of line) - for tractors without clevis drawbar . 1
-56152
56153-68982
-56152
-72499
72500-72499
-56152
-56152
-68982
Issue 05/05
6
MAIN HITCH GROUP
Form # 12903
Issue 05/05
7
MAIN HITCH GROUP
REF
43
44
45
47
48
49
50
51
52
53
54
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
PART
NUMBER
29598
29858
29866
29906
29853
29848
5113
21540
21292
B 1495 *
B 1356 *
21471
18697
18723
30743
21599
30549
30387
18689
18593
21449
18640
18603
21406
18666
21354
18669
30512
21815
Form # 12903
DESCRIPTION
QTY
CLEVIS ........................................................................................................ 1
CHANNEL - short ........................................................................................ 1
BRACKET .................................................................................................... 1
COLLAR ...................................................................................................... 1
CLEVIS ........................................................................................................ 1
STOP ........................................................................................................... 1
WASHER - (18 ga.) ..................................................................................... 1
WASHER - (10 ga.), hardened .................................................................... 2
HOOK - "S" ................................................................................................. 1
KIT – hitch plate, includes plate and hardware........................................OPT
KIT – hitch plate, includes plate and hardware........................................OPT
* - Complete kits available through WholeGoods only.
BOLT - round head, square neck, 1/2 NC x 1-1/4 inch
NUT - lock 1/2 NC distorted thread
BOLT - hex head, 1/2 NC x 1-1/2 inch
BOLT - hex head, 3/4 NC x 6 inch
NUT - lock 3/4 NC distorted thread
NUT - hex 3/4 NC
BOLT - flange 1/2 NC x 1.0 lg. .......................................................................
WASHER - lock 3/4 Nom I.D.
WASHER - flat 1-1/16 I.D.
NUT - lock 5/8 NC
NUT - lock 3/8 NC
NUT - push on ...............................................................................................
SERIAL
NUMBER
-68982
68983689836898368983-72499
-68982
-72499
Issue 05/05
8
30’ AUSTRALIAN UNITS (S.N. 124500 & UP) &
36' PULL-TYPE FRONT HITCH & STABILIZER ASSEMBLY
Form # 12903
Issue 05/05
9
30’ AUSTRALIAN UNITS (S.N. 124500 & UP) &
36' PULL-TYPE FRONT HITCH & STABILIZER ASSEMBLY
REF
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
32392
32287
32292
32298
32315
32320
31752
18611
31771
31770
32309
21540
18629
18648
30061
30464
30525
13125
22072
32282
B 1495
A
B
C
D
E
F
G
H
30209
18638
18591
30528
30527
18666
30549
18689
DESCRIPTION
QTY
SERIAL
NUMBER
HITCH – front, (Ser. no. 71996 and below also order jack 36176) .............. 1
CHANNEL – inside, (Telescoping Hitch) ...................................................... 1
CHANNEL – outside, (Telescoping Hitch).................................................... 1
ARM - radius, stabilizer ................................................................................ 1
PLATE ......................................................................................................... 1
TUBE - inner ................................................................................................ 1
TUBE - clamp .............................................................................................. 1
SPRING ....................................................................................................... 1
CLAMP - (clip extends 20 mm past clamp side)........................................... 1
CLAMP - (clip extends 30 mm past clamp side)........................................... 1
TUBE - outer ................................................................................................ 1
WASHER - hardened, 13/16" I.D. ................................................................ 4
PIN – clevis, 3/4 x 3-3/4 inch ........................................................................ 1
PIN – cotter, 3/16 x 1-1/4 inch ...................................................................... 2
PIN – roll, 3/8 x 2 inch .................................................................................. 1
PIN – clevis, 3/4 x 2-3/4 inch ........................................................................ 1
PIN – clevis, 1 x 2-1/8 inch ........................................................................... 1
PIN - hair....................................................................................................... 1
WASHER ..................................................................................................... 1
PLATE - hitch ............................................................................................... 1
KIT - hitch plate, with hardware (Available through WholeGoods only)
BOLT – hex head, 1/2 NC x 4-1/2 inch
WASHER - lock, 1/2 I.D.
NUT – hex, 1/2 NC
BOLT - hex head, 1/2 NC x 3-1/2 inch thread full length
BOLT - hex head, 5/8 NC x 4 inch thread full length
NUT – lock, 5/8 NC, distorted thread
NUT – lock, 3/4 NC, distorted thread
NOTE: For remainder of Main Hitch Group components, see page 4
Form # 12903
Issue 05/05
10
SIDE DRAFT CONTROL ATTACHMENT
21, 25 and 30 FOOT UNITS
Form # 12903
Issue 05/05
11
SIDE DRAFT CONTROL ATTACHMENT
21, 25 and 30 FOOT UNITS
REF
PART
NUMBER
B 1855
DESCRIPTION
QTY
KIT – side draft control, complete
(Available through WholeGoods only)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
32315
30525
13125
22072
32298
30061
32363
30464
18648
32320
31752
18611
32367
18629
21540
32371
32376
PLATE .......................................................................................................... 1
PIN - clevis 1 x 2-1/8 inch ............................................................................. 1
PIN - hair, ww#10 ......................................................................................... 1
WASHER - flat.............................................................................................. 1
ARM – radius, stabilizer................................................................................ 1
PIN – roll, 3/8 x 2 inch .................................................................................. 1
ANCHOR - pivot ........................................................................................... 1
PIN – clevis, 3/4 x 2-3/4 inch ........................................................................ 1
PIN – cotter, 3/16 x 1-1/4 inch ...................................................................... 2
TUBE - inner ................................................................................................. 1
TUBE - clamp .............................................................................................. 1
SPRING ........................................................................................................ 1
TUBE - outer................................................................................................. 1
PIN – clevis, 3/4 x 3-3/4 inch ........................................................................ 1
WASHER - hardened 13/16 inch I.D. ........................................................... 4
MOUNT - tube .............................................................................................. 1
CHANNEL .................................................................................................... 1
A
B
C
D
E
F
30527
18666
30387
18689
21589
18697
NUT – lock, 5/8 NC distorted thread
NUT - lock, 1/2 NC distorted thread
Form # 12903
SERIAL
NUMBER
Issue 05/05
12
WHEELS, CASTERS & WHEEL LOCKS
Form # 12903
Issue 05/05
13
REF
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
29776
29019
29786
29788
29798
29027
29794
29713
29888
31453
29894
29805
32325
49927
7910
30517
21686
30521
7900
30516
7909
7900
7920
21376
18601
21540
5512
18648
21687
30520
21685
30522
30758
102187
21313
30446
30991
30827
50213
21395
21719
32330
49935
29818
32340
49929
29823
29836
29839
13
14
15
16
17
18
19
20
21
22
23
24
25
27
28
29
30
DESCRIPTION
z
z

z
z

QTY
HOUSING - lock ........................................................................................... 1
BEARING - nylon thrust................................................................................ 1
DISC – thrust bearing ................................................................................... 1
LOCK ............................................................................................................ 1
PIN - L/H lock .............................................................................................. 1
SPRING - compression ............................................................................... 1
EYEBOLT .................................................................................................... 2
HANDLE - (up to Ser.# 56152 also order 29678 Hose Ass'y., Pg. 57)......... 1
LOCKPLATE ............................................................................................... 1
BUSHING .................................................................................................... 2
PIN - left wheel ............................................................................................ 1
CASTER - left wheel (5 Bolt Wheel) ........................................................... 1
CASTER - left wheel, with spindle (6 Bolt Wheel) ....................................... 1
CASTER - left wheel, less spindle (6 Bolt Wheel) ...................................... 1
CONE - bearing c/w seal (5 Bolt) ................................................................. 2
CONE - bearing c/w seal (6 Bolt) ................................................................. 2
HUB - c/w bearing cups (5 Bolt) ................................................................... 2
HUB - c/w bearing cups (6 Bolt) ................................................................... 2
CUP - inner bearing (5 Bolt) ........................................................................ 2
CUP - inner bearing (6 Bolt) ........................................................................ 2
CUP - outer bearing (5 Bolt) ........................................................................ 2
CUP - outer bearing (6 Bolt) ........................................................................ 2
CONE - bearing (5 Bolt) .............................................................................. 2
CONE - bearing (6 Bolt) .............................................................................. 2
WASHER - flat 13/16 I.D. (5 Bolt Wheel) ..................................................... 2
WASHER - flat, hardened (6 Bolt Wheel).................................................... 2
NUT - slotted hex, 3/4 NF ............................................................................. 2
PIN – cotter, 3/16 x 1-1/4 inch ...................................................................... 2
CAP - dust (5 Bolt Wheel) ............................................................................ 2
CAP - dust (6 Bolt Wheel) ............................................................................ 2
WHEEL – 5 bolt, for 8.5 tire .......................................................................... 2
WHEEL – 6 bolt, with valve stem protector, for 9.5 or radial tire .............OPT
TIRE - tubeless 8.5L-14 (6-ply I1 Rib Imp.)................................................ 2
TIRE - tubeless 9.5L-14 (6-ply I1 Rib Imp.)................................................ 2
TIRE - 9.5L-14 (8-ply I1 Rib Imp.) .............................................................. 2
TUBE - inner, for tire 30991.......................................................................... 2
TIRE - ST215-75-R14 radial ....................................................................OPT
VALVE - tire .................................................................................................. 2
BOLT - wheel (Qty. 10 for 5 Bolt Wheel) .................................................... 12
CASTER - right Wheel.................................................................................. 1
CASTER - right Wheel.................................................................................. 1
SPINDLE, R/H wheel (5 Bolt Wheel)............................................................ 1
SPINDLE - R/H wheel (6 Bolt Wheel)........................................................... 1
SPINDLE - L/H & R/H wheels (6 Bolt Wheel)............................................... 2
BUSHING - retainer ...................................................................................... 1
CLEVIS. ........................................................................................................ 1
CLEVIS. ........................................................................................................ 1
SERIAL
NUMBER
7250072500-
-56152
56153-
Form # 12903
Issue 05/05
14
Form # 12903
Issue 05/05
15
REF
31
32
33
34
35
A
B
C
D
E
F
G
H
J
K
L
M
PART
NUMBER
DESCRIPTION
QTY
18627
13125
29785
15325
29216
PIN – clevis, 3/4 x 2-5/8 inch ........................................................................ 1
PIN – hair, WW#10 ....................................................................................... 1
BRACKET - lamp.......................................................................................... 1
WASHER...................................................................................................... 2
BRACKET..................................................................................................... 1
B 4289
KIT – spare 9.5 tire, tube and six bolt wheel attachment ................... A/R
(includes 30758 wheel, 30991 tire & 30827 inner tube)
(Available through Wholegoods only)
SERIAL
NUMBER
68983-
18593
NUT - hex 3/4 NC
21568
18669
21565 z BOLT - hex head, 1/2 NC x 1-3/4 inch
30515 BOLT – round head, square neck, 1/2 NC x 1-3/4 inch
21383
NUT – flange head, 1/2 NC
18599
WASHER – flat, 17/32 I.D.
18697
NUT - lock, 1/2 NC
21760
18690
NUT – lock, 5/16 NC
21526
21449
BOLT – flange head, 1/2 NC x 1 inch
50186 NUT - lock, smooth flange, 1/2 NC distorted thread
Form # 12903
Issue 05/05
16
MAIN DRIVES – 3000 SERIES WINDROWERS
Form # 12903
Issue 05/05
17
REF
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
PART
NUMBER
REF
11142
21859
21701
29580
32094
29588
32099
29902
29901
29903
29905
29603
29702
29834
29706
29731
29723
21794
29704
29742
29016
29700
29726
22051
29755
29695
29901
29902
29010
29560
29561
19681
29564
29385
9128
334
18585
32360
21263
29632
29033
18608
29055
29210
31876
Form # 12903
DESCRIPTION
QTY
SHAFT ASS'Y. P.T.O. - see Page 25 for components
KEY – woodruff, SAE #C ............................................................................. 3
BEARING - c/w lock collar ........................................................................... 4
FLANGETTE ................................................................................................ 4
FRAME – drive, 21', 25', 30' ........................................................................ 1
FRAME – drive, all 36’, 30’ Australian units with S.N. 124500 and up ......... 1
SHAFT - 21', 25', 30' .................................................................................... 1
SHAFT - all 36’, 30’ Australian units with S.N. 124500 and up .................... 1
PULLEY - for 540 RPM PTO (approx. 12-1/2" [320 mm] O.D.) ................... 1
PLATE ......................................................................................................... 1
PLATE ......................................................................................................... 1
SHIELD – drive, for machines up to & incl. Ser.#68982; also order............. 1
29834, Item 11
SHIELD ........................................................................................................ 1
SHIELD - c/w decal ..................................................................................... 1
GUIDE - belt ................................................................................................ 3
MOUNT - mule drive idler ............................................................................ 1
BRACKET - swivel idler ............................................................................... 2
PULLEY - idler ............................................................................................. 2
SHIELD - mule idler ..................................................................................... 1
WASHER - formed ...................................................................................... 2
BOLT ........................................................................................................... 1
STUD - with machined nut ........................................................................... 1
EYEBOLT .................................................................................................... 1
WASHER ..................................................................................................... 4
GUIDE - belt ................................................................................................ 1
BELT - main drive ........................................................................................ 1
PULLEY - for 540 RPM PTO (approx. 9-1/2" [240 mm] O.D.) ..................... 1
PULLEY - for 1000 RPM PTO (approx. 12-1/2" [320 mm] O.D.) ................. 1
SHAFT - pulley ass'y .................................................................................... 1
PULLEY - half (5" [127 mm] O.D.) - see note item 40 ................................. 1
PULLEY - half (6-3/8" [162 mm] O.D.) ......................................................... 1
SHIM ............................................................................................................ 6
WASHERS - welded .................................................................................... 2
GUIDE - belt ................................................................................................ 1
PULLEY ....................................................................................................... 1
KEY - 1/4 sq. x 1-1/2 inch ............................................................................ 1
SCREW – set, 3/8 NC x 1/2 inch, Allan Socket............................................ 2
BELT - draper Countershaft Drive ............................................................... 1
IDLER - flat .................................................................................................. 1
BRACKET - idler .......................................................................................... 1
SPRING - torsion ......................................................................................... 1
PIN - cotter ................................................................................................... 1
BRACKET - drive frame support ................................................................. 1
PULLEY - half (6-3/8" [162 mm] O.D.) ......................................................... 1
NOTE: Items 40 & 26 may be interchanged to vary reel speed.
(Store pulley half not in use under cover, Item 41)
SERIAL
NUMBER
-68982
68983-71960
-71960
-71960
-71960
56153-56152
Issue 05/05
18
Form # 12903
Issue 05/05
19
REF
PART
NUMBER
DESCRIPTION
QTY
41
42
43
44
45
51
52
53
54
55
29959
21860
30661
29596
31594
32166
32172
32171
32168
7782
COVER - c/w decals .................................................................................... 1
FLANGETTE - c/w straight grease fitting .................................................... 3
FLANGETTE - c/w 45° grease fitting ........................................................... 1
BRACE ........................................................................................................ 1
BRACKET - idler swivel, c/w decal............................................................... 2
ANGLE - bearing mount - all 36’, 30’ Australian units with S.N. 124500 and up .......... 2
BEARING - wood (no grease hole) - all 36’, 30’ Australian units S.N. 124500 and up ....1
BEARING - wood (with grease hole) - all 36’, 30’ Australian units S.N. 124500 and up .... 1
CAP - bearing c/w grease fitting - all 36’, 30’ Australian units S.N. 124500 and up ... 1
FITTING - grease, straight, 1/4 NF - all 36’, 30’ Australian units S.N. 124500 and up 1
A
B
C
D
E
F
G
H
I
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
Y
Z
AA
AB
AC
AD
21383
18697
21449
21821
18525
18666
30415
21493
21281
18690
21595
18637
30035
21393
30267
21576
18599
18638
18591
19965
21452
18689
18590
18598
18664
18908
30368
21066
21582
BOLT – round head, square neck, 5/8 NC x 2-1/2 inch
BOLT – plow, 5/8 NC x 2 inch
BOLT - round head, square neck, 5/16 NC x 3 inch
BOLT - round head, square neck, 5/16 NC x 3/4 inch
BOLT - hex head, 5/16 NC x 3.0 inch
WASHER - lock, 3/8 Nom. I.D.
WASHER – lock, 1/2 Nom. I.D.
NUT – hex, 1/2 NC
BOLT – round head, square neck, 3/8 NC x 1.0 inch
NUT – hex, 3/8 NC
NUT – jam, 3/8 NC
SCREW – set, cup pt, square head, 3/8 NC x 1 inch
BOLT - flange head, 1/2 NC x 1-1/4 inch
Form # 12903
SERIAL
NUMBER
71961-
Issue 05/05
20
Form # 12903
Issue 05/05
21
REF
PART
NUMBER
1
2
3
4
5
REF
11142
21859
21701
29580
32094
29588
32099
29902
29901
29903
29905
29603
29834
29706
29731
21794
29742
29016
29700
29726
29695
29901
29902
152030
49918
19681
29564
29385
49917
334
18585
32360
49911
9213
795
49915
29033
18608
29055
152035
6
7
8
9
10
11
12
13
15
17
18
19
20
23
24
25
26
28
29
30
31
32
33
34
35
36
37
38
39
40
DESCRIPTION
QTY
SERIAL
NUMBER
SHAFT ASS'Y P.T.O. - see Page 25 for components
KEY – woodruff, SAE #C ............................................................................. 3
BEARING - c/w lock collar ........................................................................... 4
FLANGETTE ................................................................................................ 4
FRAME - drive - 21', 25', 30' ....................................................................... 1
FRAME - drive - all 36’, 30’ Australian units ................................................ 1
SHAFT - 21', 25', 30' .................................................................................... 1
SHAFT - all 36’, 30’ Australian units
PLATE ......................................................................................................... 1
PLATE ......................................................................................................... 1
SHIELD – drive ............................................................................................. 1
SHIELD - c/w decal ..................................................................................... 1
GUIDE - belt ................................................................................................ 3
MOUNT - mule drive idler ............................................................................ 1
PULLEY - idler ............................................................................................. 2
WASHER - formed ...................................................................................... 2
BOLT ........................................................................................................... 1
STUD - with machined nut ........................................................................... 1
BOLT - eye .................................................................................................. 1
BELT - main drive ........................................................................................ 1
PULLEY - for 540 RPM PTO (approx. 9-1/2" [240 mm] O.D.) ..................... 1
PULLEY - for 1000 RPM PTO (approx. 12-1/2" [320 mm] O.D.) ................. 1
PULLEY ........................................................................................................ 1
PULLEY - half (5" [127 mm] O.D.) - see note item 40 ................................. 1
SHIM ............................................................................................................ 6
WASHERS - welded .................................................................................... 2
GUIDE - belt ................................................................................................ 1
PULLEY ....................................................................................................... 1
KEY - 1/4 sq. x 1-1/2 inch ............................................................................. 1
SCREW - set 3/8 NC x 1/2 inch, allan socket............................................... 2
BELT – drive, draper countershaft................................................................ 2
IDLER - consists of: Pulley, Bearing and 2 Snap Rings ............................... 1
BEARING ..................................................................................................... 1
RING - snap.................................................................................................. 2
BRACKET - idler .......................................................................................... 1
SPRING - torsion ......................................................................................... 1
PIN - cotter ................................................................................................... 1
PULLEY - half (6-3/8" [162 mm] O.D.) ......................................................... 1
NOTE: Items 40 & 26 may be interchanged to vary reel speed.
(Store pulley half not in use under cover, Item 41)
continued on page 23……….
Form # 12903
Issue 05/05
22
Form # 12903
Issue 05/05
23
REF
PART
NUMBER
DESCRIPTION
QTY
41
42
43
44
45
46
47
51
52
53
54
55
29959
21860
30661
29596
31594
49910
7038
32166
32172
32171
32168
7782
COVER - c/w decals .................................................................................... 1
FLANGETTE - c/w straight grease fitting .................................................... 3
FLANGETTE - c/w 45° grease fitting ........................................................... 1
BRACE ........................................................................................................ 1
BRACKET - idler swivel, c/w decal............................................................... 2
SHAFT .......................................................................................................... 1
KEY – 1/4” square x 48 mm long.................................................................. 1
ANGLE – bearing mount, all 36’, 30’ Australian units................................... 2
BEARING - wood (no grease hole) - all 36’, 30’ Australian units ...................... 1
BEARING - wood (with grease hole) - all 36’, 30’ Australian units ................... 1
CAP - bearing c/w grease fitting - all 36’, 30’ Australian units .......................... 1
FITTING - grease, straight, 1/4 NF - all 36’, 30’ Australian units .................... 1
A
B
C
D
E
F
G
H
I
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
Y
Z
AA
AB
AC
AD
AE
21383
18697
21449
21821
18525
18666
30415
21493
21281
18690
21595
18637
30035
21393
30267
30664
18600
18639
18592
19965
21452
18689
18590
18598
18664
18908
30368
21066
21582
21863
NUT - flange 1/2 NC
BOLT - flange head, 1/2 NC x 1 inch
BOLT - flange head, 3/8 NC x 3/4 inch
BOLT – plow, 5/8 NC x 2.0 inch
BOLT, round head, square neck, 5/16 NC x 3/4 inch
WASHER – lock, 5/8 I.D.
NUT - hex, 5/8 NC
NUT – hex, 3/8 NC
NUT - jam, 3/8 NC
SCREW - set cup pt, square head, 3/8 NC x 1 inch
BOLT – flange head, 1/2 NC x 1-1/4 inch
BOLT – round head, square neck, 3/8 NC x 3/4 inch
Form # 12903
SERIAL
NUMBER
Issue 05/05
24
MAIN DRIVES
PTO SHAFT ASSEMBLY
Form # 12903
Issue 05/05
25
MAIN DRIVES
PTO SHAFT ASSEMBLY
REF
2
3
4
5
6
7
8
9
10
11
12
13
14
15
PART
NUMBER
DESCRIPTION
32033
30488
15406
SERIAL
NUMBER
JOINT & TUBE - half c/w guard (Rear Half) ................................................. 1
YOKE - end .................................................................................................. 1
KIT - repair.................................................................................................... 2
Yoke & Tube: not serviced, order item 2 ...................................................... 1
DECAL - danger: Shield Missing .................................................................. 1
KIT - shield bearing & retainer: Weasler....................................................... 2
BEARING - nylon: Walterscheid-Agmaster .................................................. 2
GUARD - inner: Weasler .............................................................................. 1
GUARD - inner: Walterscheid-Agmaster ...................................................... 1
JOINT & SHAFT - half c/w guard (Front Half), 540 RPM ............................. 1
JOINT & SHAFT - half c/w guard (Front Half), 1000 RPM ........................... 1
GUARD - outer: Weasler .............................................................................. 1
GUARD - outer: Walterscheid-Agmaster...................................................... 1
Yoke & Shaft: not serviced, order item 10 .................................................... 1
LOCK YOKE ASS'Y - 540 RPM ................................................................... 1
LOCK YOKE ASS'Y - 1000 RPM ................................................................. 1
LOCK YOKE ASS’Y – Belarus 38-8 spline..............................................OPT
DECAL - danger: Rotating Driveline............................................................. 1
BEARING - shield support: Walterscheid-Agmaster only............................. 1
36651
32801
30623
30328
32763
32760
32761
30318
32762
32083
32084
152056
30316
21655
B 1355 *
KIT - conversion 540 RPM to 1000 RPM
(includes 32084 [Item 13], caution decal and instructions).
B 1354 *
KIT - conversion 1000 RPM to 540 RPM
(includes 32083 [Item 13], caution decal and instructions).
*
Form # 12903
QTY
Kits available through WholeGoods only.
Issue 05/05
26
KNIFE DRIVE
Form # 12903
Issue 05/05
27
KNIFE DRIVE
REF
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
PART
NUMBER
DESCRIPTION
QTY
32230
SPINDLE ..................................................................................................... 1
REF
HEAD - knife (includes 1 of item 3): See Cutting Components, pg 30 ......... 1
13626
BUSHING - rubber ....................................................................................... 3
32236
PULLEY ASSEMBLY - crank (incl. items 5 - 8 and 21)................................ 1
6647
WASHER ..................................................................................................... 1
30517
CONE - c/w seal and bearing ...................................................................... 2
30516
CUP - bearing .............................................................................................. 2
30518
Ring - snap .................................................................................................. 2
32240
PIN - tapered ............................................................................................... 1
32243
PITMAN - c/w bearings (item 11) & grease fittings (item 21) ...................... 1
30519
BEARING - less collar ................................................................................. 2
29371
SPACER ...................................................................................................... 1
29364
ARM - radius c/w bushings (item 3) and spacer (item 14) ........................... 1
29376
ARM - radius c/w bushings (item 3) and spacer (item 14) ........................... 1
29374
SPACER ...................................................................................................... 1
22072 z WASHER - 21/32 I.D. x 1-1/2 O.D. .......................................................... A/R
152009 WASHER - 21/32 I.D. x 2 inch.................................................................. A/R
32247
WASHER ..................................................................................................... 1
30520
CAP - dust ................................................................................................... 1
32246
PIN ............................................................................................................... 1
29274
PITMAN - c/w bearings less collars (includes items 20 & 22 - qty. 2 each) . 1
21010
FITTING - grease, 90° .................................................................................. 2
18671
FITTING - grease, straight ........................................................................... 3
30367
BEARING - less collar .................................................................................. 2
31465
WASHER ..................................................................................................... 1
21540
WASHER ..................................................................................................... 1
18607
PIN – cotter, 5/32 dia. x 1-1/2 inch ............................................................... 1
29355
PULLEY - crank (incl. items 21 & 27 through 30)......................................... 1
29410
PULLEY - crank (incl. items 21 & 27 through 30)......................................... 1
29356
PIN ............................................................................................................... 1
7900
CUP - bearing .............................................................................................. 2
7910
CONE - bearing c/w seal ............................................................................. 2
21545
RING - snap.................................................................................................. 2
29361
PIN ............................................................................................................... 1
29347
SPINDLE ..................................................................................................... 1
29394
SPINDLE ..................................................................................................... 1
29378
PLATE - clamp ............................................................................................ 1
29380
NUT - stop ................................................................................................... 1
29016
BOLT - adjusting .......................................................................................... 1
29384
BELT ............................................................................................................ 1
17675
SPACER ...................................................................................................... 1
29661
COVER - c/w rods, hinges, & decals ........................................................... 1
29763
HINGE ......................................................................................................... 2
29821
HANDLE - cover ........................................................................................... 1
29418
NUT - spindle................................................................................................ 1
29362
SPACER....................................................................................................... 1
SERIAL
NUMBER
-56152
56153-
-102199
-102199
-102199
-102199
-102199
-56152
56153-102199
-102199
-102199
-102199
-102199
-102199
-56152
56153-102199
68983-102199
Form # 12903
Issue 05/05
28
KNIFE DRIVE
Form # 12903
Issue 05/05
29
KNIFE DRIVE
REF
A
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
PART
NUMBER
30011
21863
21452
30265
18666
19634
18637
21568
5512
18638
30266
30515
18599
18591
18723
21975
1624
18669
Form # 12903
DESCRIPTION
QTY
SERIAL
NUMBER
NUT – slotted, 3/4 NF
NUT – hex, 1/2 NC
Issue 05/05
30
CUTTING COMPONENTS
NOTE: For a complete 21’ knife, order:
Item 3
Item 8
Item 9
Item 10
Item 11
Item 12
49667
34391
30668
30669
30696
30852
L/H Assembly
SECTION – half
SCREW - #12 x 1 inch
NUT - lock (knife and half section)
NUT - lock, #12 NC
SCREW - #12 x 1-1/8 inch
7 provided, a total of 9 or 13 req’d
depending on knife.
21'
Qty. 1
Qty. 2
Qty. 2
Qty. A/R
Qty. 1
Qty. 2 or 6.
NOTE: For a complete 25’, 30’ or 36’ knife, order:
Item 3
Item 4
Item 5
Item 6
Item 8
Item 9
Item 10
49667
*
33955
34390
34391
30668
30669
L/H Assembly
R/H Assembly (4’, 9’ or 15’)
BAR - splice
SECTION - knife
SECTION - half (at knife head)
SCREW - #12 x 1 inch
NUT - lock (knife and half section)
25', 30' & 36'
Qty. 1
Qty. 1
Qty. 1
Qty. 3
Qty. 1
Qty. 8
Qty. A/R
* Part No. varies by header size. Order appropriate number from
Ref. 4 above.
Form # 12903
Issue 05/05
31
CUTTING COMPONENTS
REF
PART
NUMBER
1
2
3
4
32722
13626
49667
43076
43077
43078
33955
23065
16671
34390
118475
23116
20694
34399
23117
16944
34391
30668
30669
30696
30852
23064
118345
28815
32755
29336
118346
118347
118162
HEAD - knife (15 hole) c/w rubber bushing (item 2) ..................................... 1
BUSHING - rubber ....................................................................................... 1
KNIFE - 21' complete, 25' L/H, 30' L/H and 36' L/H...................................... 1
KNIFE - 4' R/H extension, 25' ...................................................................... 1
KNIFE - 9' R/H extension, 30' ....................................................................... 1
KNIFE - 15' R/H extension, 36' ..................................................................... 1
PLATE – splice, (not required for 21')........................................................... 1
SECTION - knife, top-serrated, high shoulder .......................................... A/R
SECTION - knife, bottom-serrated, low shoulder ..................................... A/R
SECTION - knife, top-serrated, low shoulder, Kondex ............................. A/R
SECTION – knife, top-serrated, low shoulder, Busatis............................OPT
SECTION - knife, L/H Half, high shoulder .................................................... 1
SECTION - knife, L/H Half, low shoulder...................................................... 1
SECTION - knife, L/H half, low shoulder ...................................................... 1
SECTION - knife, R/H half, high shoulder .................................................... 1
SECTION - knife, R/H half, low shoulder ..................................................... 1
SECTION - knife, R/H half, low shoulder...................................................... 1
SCREW - ribbed neck #12 NC x 1 inch (for knife head & splice plate) .... A/R
NUT – lock, #12 NC distorted thread........................................................ A/R
SCREW - ribbed neck #12 NC x 5/8 inch (for bolted knife)...................... A/R
SCREW - ribbed neck #12 NC x 1-1/8 inch (for knife head) ........................ 9
GUARD - knife, used all positions except first 3 at left end ...................... A/R
SPECIAL GUARD – knife, used first 3 guards at left end (was 28014)........ 3
CLIP - hold-down ..................................................................................... A/R
HEAD - knife (15 hole) c/w bushing (Item 2) - 36 ft. .................................... 1
HEAD - knife (11 hole) c/w rubber bushing (item 2), 21, 25, 30 ft. .............. 1
GUARD – stub (was 34974) ..................................................................... A/R
SPECIAL GUARD – stub, used first 3 guards at left end (was 34975) ........ 3
CLIP – hold-down, adjustable (was 49420) .............................................. A/R
8219
8218
18654
18730
13755
21411
7258
118193
118154
BOLT – round head, square neck, 7/16 NC x 1-1/4 inch (through guard only)
BOLT – round head, square neck, 7/16 NC x 1-1/2 inch (through guard & clip)
NUT – hex, 7/16 NC
RIVET - round head 0.208 dia. x 1 inch .........................................................
RIVET - round head 0.208 dia. x 7/8 inch ......................................................
RIVET - round head 0.208 dia. x 3/4 inch ......................................................
RIVET - round head 0.208 dia. x 5/8 inch
NUT – lock, smooth flange, 3/8 NC stainless steel
BOLT - hex head, 3/8 NC x 5/8 inch, Gr. 8
5
6
7
8
9
10
11
12
15
16
17
18
19
20
21
A
B
D
E
G
J
K
DESCRIPTION
QTY
SERIAL
NUMBER
see note (1)
-56152
56153-71960
71961-56152
56153-71960
71961-56152
56153-71960
71961-
see note (1)
-124499
-72995
-102199
OPTIONAL
OPTIONAL
124500-
-71960
-71960
-71960
NOTES: (1) 21 ft. unit - Serial number 93000 and up
25, 30 ft. units - Serial number 102200 and up
36 ft. unit - Serial number 72996 and up
Form # 12903
Issue 05/05
32
DRAPER DRIVE
Form # 12903
Issue 05/05
33
DRAPER DRIVE
REF
PART
NUMBER
1
29493
29482
29483
29473
49920
29495
21869
21702
21870
29405
13697
29407
16008
29396
29401
29402
29408
152028
14649
21263
29412
32051
23718
152014
152018
29413
152013
29025
152012
29026
152011
29409
152025
18599
18605
29914
152049
29915
152050
29920
152051
REF
29434
32100
32018
152027
33787
32050
152026
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
DESCRIPTION
z

z

z
z
z

z

B 2847
QTY
TUBE - with shaft - 21' ..............................................................................................1
TUBE - with shaft - 25' ..............................................................................................1
TUBE - with shaft - 30' ..............................................................................................1
DRIVE SHAFT - draper - 21', 25’ & 30' (For 36' Drive Shaft, see Pg. 34).................1
DRIVE SHAFT - draper - 21', 25’ & 30' (For 36' Drive Shaft, see Pg. 34).................1
COUPLER - shaft .....................................................................................................2
BEARING - c/w collar (Qty. 6 on 30') ........................................................................5
FLANGETTE - 3-Hole (Qty. 6 on 30') .......................................................................5
FLANGETTE - 3-Hole c/w lube fitting (Qty. 6 on 30')................................................5
PULLEY - hub...........................................................................................................4
PULLEY - half ...........................................................................................................8
SHIM.......................................................................................................................12
PIN - roll, 5/16 dia. x 1-1/2 inch.................................................................................4
SUPPORT - drive roller (Qty. 1 for 36' after serial number 69239) ..........................2
TRACK EXTENSION - L/H (Qty. 0 for 36') (Optional-Narrow Opening Pkg.) ...........1
TRACK EXTENSION - R/H (Qty. 0 for 36')...............................................................1
TIGHTENER - (Qty. 1 for 36' R/H)............................................................................2
TIGHTENER - (Qty. 1 for 36' R/H)............................................................................2
PULLEY - idler, "V" ...................................................................................................2
PULLEY - idler, backside ..........................................................................................2
TIGHTENER - belt, L/H (21', 25' & 30').....................................................................1
TIGHTENER - belt, L/H (36') ....................................................................................1
KIT - tightener, belt, L/H 36' (incl. items 19, 29 & tightener 32051)..........................1
TIGHTENER - belt, L/H (21', 25' & 30').....................................................................1
TIGHTENER - belt, L/H (36') ....................................................................................1
TIGHTENER - belt, R/H............................................................................................1
TIGHTENER - belt, R/H............................................................................................1
SPRING - idler, L/H ..................................................................................................1
SPRING, Idler, L/H ...................................................................................................1
SPRING - idler R/H...................................................................................................1
SPRING - idler R/H...................................................................................................1
SWIVEL - idler (Qty. 1 for 36' R/H) ...........................................................................2
SWIVEL - idler (Qty. 1 for 36' R/H) ...........................................................................2
WASHER - flat, 17/32 I.D. ....................................................................................A/R
PIN - cotter, 1/8 dia. x 1 inch ....................................................................................2
BELT - wide opening (21', 25', 30') + 36' R/H ...........................................................2
BELT - wide opening (21', 25', 30') + 36' R/H, kevlar................................................2
BELT - narrow opening (21', 25', & 30') (qty. 2 w/ narrow op. pkg.) ..........................1
BELT - narrow opening (21', 25', & 30') (qty. 2 w/ narrow op. pkg.), kevlar...............1
BELT - 36' L/H ..........................................................................................................1
BELT - 36' L/H, kevlar...............................................................................................1
ROLLER - draper, See Page 36
TRACK EXTENSION - top (qty. 2 w/ Narrow Op. Pkg.) Qty. 0 for 36' .....................1
TRACK EXTENSION - top (qty. 2 w/ Narrow Op. Pkg.) Qty. 0 for 36' .....................1
TIGHTENER - (36' L/H only)....................................................................................1
TIGHTENER - (36' L/H only).....................................................................................1
SUPPORT - drive roller (36' L/H only) ......................................................................1
SWIVEL - idler (36' L/H only) ...................................................................................1
SWIVEL - idler (36' L/H only) ...................................................................................1
SERIAL
NUMBER
-71960
-86399
8640069240-
NARROW OPENING PKG. - 21', 25' & 30' (Available through WholeGoods only.)
NOTE: 3020 Series parts are of heavier design than the 3000 series. To prevent premature failure of related parts, if upgrading
any of items 14, 17, 18, 19, 20, 21, 24, 27, 29, K or L, order all related part numbers under those listings.
A
B
C
D
E
F
G
H
J
K
21354
18669
21281
21403
21087
18636
21863
21452
21383
21868
21471
z

BOLT – hex hd, 38 NC x 2.0 lg.
NUT - lock, dist. thread, 3/8 NC
BOLT – rd hd, sq nk, 5/16 NC x 3/4 lg.
NUT - flange, 5/16 NC.
BOLT - hex hd. 5/16 NC x 1.0 lg.
BOLT - rnd hd, short sq nk, , 3/8 NC x 3/4”
NUT - flange 3/8 NC
NUT - flange, 1/2 NC
BOLT - rnd hd, short sq nk, 1/2 NC x 1”
BOLT - rd hd, shrt sq nk, 1/2 NC x 1-1/4”
L
M
N
P
Q
R
S
T
U
V
21474
30027
18638
18591
21449
21383
18600
21575
19965
18598
18599
z

BOLT – rd hd, sq nk, 1/2 NC x 2.0 lg.
BOLT – rd hd, sq nk, 1/2 NC x 2-1/4 lg.
NUT - hex 1/2 NC
BOLT - flange 1/2 NC x 1.0 lg.
NUT - flange 1/2 NC
WASHER - flat 21/32 I.D.
BOLT - hex hd. 1/2 NC x 1.0 lg.
BOLT – rd hd, sq nk, 3/8 NC x 1.0 lg.
WASHER - flat, 13/32 I.D.
Form # 12903
Issue 05/05
34
36' PULL-TYPE DRAPER DRIVE
Form # 12903
Issue 05/05
35
36' PULL-TYPE DRAPER DRIVE
REF
1
2
3
4
5
6
7
8
9
10
11
12
A
B
C
D
E
F
PART
NUMBER
DESCRIPTION
QTY
SERIAL
NUMBER
32127 z SHAFT - draper drive ................................................................................... 1
152007 SHAFT - draper drive ................................................................................... 1
32128
SHAFT - end ................................................................................................ 1
29495
COUPLER - shaft ........................................................................................ 2
32169
BEARING - wooden (with grease hole) ....................................................... 3
32170
BEARING - wooden (no grease hole) ......................................................... 3
32173
CAP - bearing c/w 90° grease fitting ............................................................ 2
21010
FITTING - grease, 90°, 1/4 NF .................................................................... 2
32165
ANGLE - bearing mount ............................................................................... 2
32168
CAP - bearing c/w grease fitting .................................................................. 1
7782
FITTING - grease, straight, 1/4 NF .............................................................. 1
32163
BRACKET .................................................................................................... 1
32164
BAR ............................................................................................................. 1
21354
18669
21493
18690
21281
21403
NUT - lock, distorted thread 3/8 NC
NUT – lock, distorted thread 5/16 NC
Form # 12903
Issue 05/05
36
DRAPERS & ROLLERS
Form # 12903
Issue 05/05
37
DRAPERS & ROLLERS
REF
1
2
3
6
7
8
9
10
11
12
13
15
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
PART
NUMBER
DESCRIPTION
QTY
32659 z ROLLER - draper drive ................................................................................. 2
(If replacing roller with formed groove at front end, order item 28)
113965 ROLLER - draper drive, vulcanized rubber coated (Optional for z models) ......................... 2
26396
BUSHING - anti-wrap ................................................................................... 2
43779
LAGGING KIT - (includes three pieces, 1 kit required per roller)(3000 Series Only) .... A/R
30550
BEARING ..................................................................................................... 2
20535
WASHER...................................................................................................... 2
33759
BAR - (with square hole) .............................................................................. 2
23751
BAR - (with rectangular slot)......................................................................... 2
33774
SHAFT .......................................................................................................... 2
33773
TUBE - idler roller (if replacing roller with formed grooves at each end, ...... 2
order item 29)
6596
BEARING - ball............................................................................................. 4
33001
RETAINER - rubber ...................................................................................... 4
33190
SPACER....................................................................................................... 4
26411
SUPPORT - idler roller ................................................................................. 2
26412
SUPPORT - idler roller ................................................................................. 2
33768
TIGHTENER - "L" end (qty 1 for 36' R/H)..................................................... 2
33202
TIGHTENER - straight end - 36' L/H ............................................................ 1
26426
ROD - spring................................................................................................. 4
26427
CHANNEL - stop .......................................................................................... 4
26429
SPRING ........................................................................................................ 4
26428
WASHER - stop............................................................................................ 4
26431
SPRING ........................................................................................................ 4
18605
PIN - cotter, 1/8 dia. x 1 inch. ....................................................................... 4
22922
DRAPER - wood slat - L/H 30', R/H 21' & 25'............................................... 1
32919
DRAPER - rubber slat - L/H 30', R/H 21' & 25' (was 33797) ........................ 1
29827
DRAPER - wood slat - R/H 30' ..................................................................... 1
32920
DRAPER - rubber slat - R/H 30' (was 37124)............................................... 1
32037
DRAPER - wood slat - R/H & L/H 36' ........................................................... 2
32921
DRAPER - rubber slat - R/H & L/H 36' (was 33447)..................................... 2
29824
DRAPER - wood slat - L/H 25'...................................................................... 1
32923
DRAPER - rubber slat - L/H 25' (was 33796) ............................................... 1
29828
DRAPER - wood slat - L/H 21'...................................................................... 1
32922
DRAPER - rubber slat - L/H 21' (was 32867) ............................................... 1
32918
DRAPER - extension, 15" 380 mm (was 33450) ...................................... A/R
NOTE: All drapers include item 26. All wood slat drapers include item 27.
14334
SLAT KIT - metal connector (includes two slats and hardware)............... A/R
43469
SLAT KIT - metal connector (includes two slats and hardware)............... A/R
14333
SLAT - wooden ......................................................................................... A/R
32689
DRIVE ROLLER REPAIR KIT - (includes roller & front bearing/bar Assembly) ..... A/R
32684
IDLER ROLLER REPAIR KIT - (incl. items 9, 10, 12, 13, 18 & hardware) ...... A/R
26393
RETAINER – bearing, rubber ....................................................................... 6
26392
PIN - roller..................................................................................................... 6
26391
SHIELD - anti-wrap....................................................................................... 6
26390
SUPPORT - drive roller ................................................................................ 2
20044
SPACER....................................................................................................... 2
33784
DRIVE ROLLER BEARING KIT - (repairs front bearing when roller with ....... A/R
SERIAL
NUMBER
-89999
90000-
formed groove still being used).
A-P
REF
See page 39 for hardware listing.
Form # 12903
Issue 05/05
38
DRAPERS & ROLLERS
Form # 12903
Issue 05/05
39
DRAPERS & ROLLERS
REF
A
B
C
D
E
F
G
H
J
L
M
N
P
*
PART
NUMBER
*
*
DESCRIPTION
20077
18637
19965
18598
18669
5145
5146
21264
NSS
NSS
30598
21478
18590
WASHER - flat 13/32 I.D.
RIVET - 3/16 dia. x 9/16 inch (1/2 lb. Pkg.)
STAPLE - 18 ga. x 1/4 wide x 3/8 inch (1/2 lb. Pkg.)
SCREW – round head, phillips head, # 10 NC x 1-1/4 inch
NUT – hex, #10 NC
WASHER - lock 3/8 internal tooth
NUT – hex, 3/8 NC
23589
Draper Hardware Package, includes 12 each of items J and L.
NSS
QTY
SERIAL
NUMBER
Not Serviced Separately
For 36' Adjustable Draper Track, See Pg. 40
Form # 12903
Issue 05/05
40
36' PULL-TYPE ADJUSTABLE DRAPER TRACK
Form # 12903
Issue 05/05
41
36' PULL-TYPE ADJUSTABLE DRAPER TRACK
REF
PART
NUMBER
DESCRIPTION
QTY
1
2
32150
32151
ADJUSTABLE DRAPER TRACK - front ...................................................... 1
ADJUSTABLE DRAPER TRACK - rear ....................................................... 1
A
B
C
D
E
F
21863
18590
20077
18637
18669
18598
NUT - hex, 3/8 NC
Form # 12903
SERIAL
NUMBER
Issue 05/05
42
REEL DRIVE & REEL SUPPORT ARMS
Form # 12903
Issue 05/05
43
REF
PART
NUMBER
1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
19
20
22
23
24
25
26
27
35
36
39
41
29421
37948
29440
37855
37866
29446
29462
29464
29470
1868
29430
29435
26427
26428
26429
20429
23142
18608
14649
21263
29438
29715
29732
29024
29738
49901
5259
49904
18671
29737
49905
29728
29474
4226
29914
152049
31168
29763
29436
13684
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
21345
21486
18669
21863
21452
21821
21158
18666
21581
18638
18697
21720
21406
18639
18592
28
29
30
31
32
33
34
DESCRIPTION
z

z

QTY
SERIAL
NUMBER
ARM - support, L/H, reel ................................................................................... 1
ARM - support, R/H, reel ................................................................................... 1
BRACKET - bearing, L/H ................................................................................... 1
BRACKET - bearing, R/H .................................................................................. 1
SCREW - positioning ......................................................................................... 2
PROP - reel ....................................................................................................... 2
SPACER ............................................................................................................ 1
BRACE – reel arm ............................................................................................. 1
PLATE ............................................................................................................... 1
SPACER ............................................................................................................ 1
ARM – idler ....................................................................................................... 1
ROD - spring ..................................................................................................... 1
CHANNEL - stop ............................................................................................... 1
WASHER - stop ................................................................................................. 1
SPRING ............................................................................................................ 1
SPRING ............................................................................................................ 1
BUSHING - plastic ............................................................................................. 1
PIN - cotter, 3/16 x 1-1/2 inch ........................................................................... 3
PULLEY - idler, V-belt ....................................................................................... 1
IDLER - flat ........................................................................................................ 2
SHIELD - c/w decal .......................................................................................... 1
CHANNEL - reel drive ....................................................................................... 1
ARM - idler ........................................................................................................ 1
SPRING - torsion .............................................................................................. 1
HUB - c/w bronze bushing (incl. items 28 and 29) ............................................ 1
HUB - c/w needle bearings (incl. items 28 and 29) ........................................... 1
BUSHING - bronze ............................................................................................ 2
BEARING - needle ............................................................................................ 2
FITTING - grease 1/4 NF x 1/2 inch ................................................................... 1
PIN .................................................................................................................... 1
PIN .................................................................................................................... 1
TAB - shield ....................................................................................................... 1
PULLEY - reel ................................................................................................... 2
BELT - primary reel drive .................................................................................. 1
BELT - final reel drive ........................................................................................ 1
BELT - final reel drive ........................................................................................ 2
SHIELD - reel drive c/w hinges & decal ............................................................ 1
HINGE - shield .................................................................................................. 2
SHIELD - pulley ................................................................................................. 1
SPACER ............................................................................................................ 1
NUT - jam, hex, 5/8 NC
BOLT – round head, square neck, 3/8 NC x 4 inch ....................................................
NUT - lock, distorted thread 3/8 NC
BOLT - flange, 3/8 NC x 3/4 inch
NUT – lock, distorted thread, 5/8 NC
NUT - lock, 1/2 NC
NUT - hex, 5/8 NC
-82885
Form # 12903
Issue 05/05
44
Form # 12903
Issue 05/05
45
REF
R
S
T
U
V
W
X
Y
Z
AA
PART
NUMBER
21469
18599
18591
21491
21576
30035
21760
18902
18690
21565
DESCRIPTION
QTY
SERIAL
NUMBER
NUT - hex, 1/2 NC
NUT - lock, distorted thread, 5/16 NC
For 36' Center Reel Arm See Pg. 46
Form # 12903
Issue 05/05
46
36' PULL-TYPE CENTER REEL SUPPORT ARM
Form # 12903
Issue 05/05
47
36' PULL-TYPE CENTER REEL SUPPORT ARM
REF
PART
NUMBER
DESCRIPTION
QTY
1
2
3
4
5
6
7
32265
32120
37866
32274
32275
13125
18608
ARM - support, center reel ........................................................................... 1
BRACKET - bearing .................................................................................... 1
SCREW - positioning ................................................................................... 1
PIN ............................................................................................................... 1
PIN - reel support ......................................................................................... 1
PIN – hair, WW#10 ...................................................................................... 1
PIN – cotter, 3/16 dia. x 1-1/2 inch ............................................................... 2
A
B
21345
21486
21863
18669
21452
NUT – hex, jam, 5/8 NC
BOLT - round head, square neck, 3/8 NC x 4 inch.........................................
BOLT - round head, square neck, 3/8 NC x 3/4 lg. ........................................
NUT - lock, 3/8 NC distorted thread ...............................................................
NUT – serrated flange lock, 3/8 NC................................................................
C
Form # 12903
SERIAL
NUMBER
-82885
82886-82885
82886-
Issue 05/05
48
BAT REEL
Serial No. 82885 and prior
REF
1
PART
NUMBER
DESCRIPTION
QTY
4
5
6
7
8
9
10
11
12
29667
29668
29669
26729
26723
32346
32347
32348
22671
26755
20535
20410
20411
30036
26766
32353
16677
SHAFT – reel - 21' ........................................................................................ 1
SHAFT - reel - 25'......................................................................................... 1
SHAFT - reel - 30' (For 36' Reel Shafts, see P. 49) ..................................... 1
ARM - reel................................................................................................. A/R
BAT - reel - 36' (18' sections) ..................................................................... 10
BAT - reel - 21'.............................................................................................. 5
BAT - reel - 25'.............................................................................................. 5
BAT - reel - 30'.............................................................................................. 5
SHIELD - end (Qty. 20 on 36')................................................................... 10
BRACE - (none on 36') ............................................................................... 10
WASHER - (none on 36')............................................................................ 10
BEARING - wooden (upper half) (qty. 3 on 36') ........................................... 2
BEARING - wooden (lower half) (qty. 3 on 36') ............................................ 2
FITTING - grease (qty. 3 on 36').................................................................. 2
CAP - bearing c/w grease fitting (qty. 3 on 36') ............................................ 2
STRAP - (none on 36') ............................................................................... 10
WASHER - (none on 36')............................................................................ 10
A
B
C
D
E
G
J
K
21403
21975
21452
21486
18669
30278
21755
21821
BOLT – flange head, 5/16 x 3/4 inch
2
3
Form # 12903
SERIAL
NUMBER
-69239
Issue 05/05
49
36' PULL-TYPE REEL SHAFTS
Serial No. 82885 and prior
REF
PART
NUMBER
DESCRIPTION
QTY
1
2
3
4
32188
32194
32200
32202
SHAFT - L/H reel .......................................................................................... 1
SHAFT - R/H reel ......................................................................................... 1
BLOCK ......................................................................................................... 1
SPACER....................................................................................................... 2
A
B
30011
18697
NUT – lock, 1/2 NC (Distorted Thread)
SERIAL
NUMBER
NOTE: For remainder of reel components, see page 48
Form # 12903
Issue 05/05
50
BAT REEL
Serial No. 82886 and after
Form # 12903
Issue 05/05
51
BAT REEL: Serial No. 82886 and after
REF
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
A
B
C
D
E
G
H
J
K
L
M
N
P
PART
NUMBER
32828
49557
32824
49553
32825
49554
32829
43122
49468
49633
32856
32860
27160
35694
18725
43145
43107
43108
43109
43106
40110
32906
32852
32858
32916
137035
32202
18671
49464
117307
117306
117302
117303
21301
121012
18648
18723
18638
21863
21863
21484
30693
30228
21581
137036
18697
18689
21452
18591
21594
18601
NOTES: (1)
(2)
Form # 12903
DESCRIPTION
QTY
TUBE - reel, 21' (see note 2) ........................................................................ 1
TUBE - reel, 21' ............................................................................................ 1
TUBE - reel, 25' ............................................................................................ 1
TUBE - reel, 30' ............................................................................................ 1
TUBE - L/H reel, 36'...................................................................................... 1
TUBE - R/H reel, 36' (see note 2)................................................................. 1
TUBE - R/H reel, 36' - 1/2" holes in clevis .................................................... 1
TUBE - R/H reel, 36' - 3/4" holes in clevis .................................................... 1
SHAFT - connector, L/H (drive side) ............................................................ 1
SUPPORT - reel, includes item 17 (qty. 3 on 36') ........................................ 2
WASHER - flat, (qty. 5 on 36') ...................................................................... 3
BUSHING - reel support, (qty. 3 on 36') ....................................................... 2
PIN - clevis, 5/8 x 2 inch effective length, (qty. 2 on 36') .............................. 1
ARM - reel.................................................................................... see note (1)
BAT - reel, 21'............................................................................................... 5
BAT - reel, 25'............................................................................................... 5
BAT - reel, 30'............................................................................................... 5
BAT - reel, 36'............................................................................................. 10
SHIELD - reel end (qty. 20 on 36').............................................................. 10
ANCHOR - R/H............................................................................................. 1
WASHER - flat, R/H side (1/2 inch hole) ...................................................... 1
SHAFT - connector, 36' center - 1/2" holes in clevis .................................... 1
SHAFT - connector, 36' center - 3/4" holes in clevis .................................... 1
BLOCK - connector, 36' center, with lube fitting, item 20 ............................. 1
SPACER - 36' center connection, used with 1/2" hardware ......................... 2
FITTING - lube (qty. 3 on 36')....................................................................... 2
WASHER - flat, R/H side (5/8 inch hole) ...................................................... 1
SHIELD – reel end, R/H – 21’ (was 116056)................................................ 5
SHIELD – reel end, L/H – all sizes (qty. 10 for 36’) (was 116050) ............... 5
SHIELD – reel end, R/H – 25’ & 36’ (qty. 10 for 36’) (was 116045) ............. 5
SHIELD – reel end, R/H – 30’ (was 116046)................................................ 5
FITTING – lube, 45° ..................................................................................... 1
SUPPORT – bat reel end shield (qty. 20 for 36’)........................................ 10
PIN - cotter, 3/16 x 1-1/4 inch
WASHER - lock, 1/2 inch
BOLT - round head, square neck, 3/8 NC x 3/4 inch
BOLT - round head, square neck, 3/8 NC x 3/4 inch - 21' & 36'
BOLT - round head, square neck, 3/8 NC x 1-1/2 inch - 25' & 30'
NUT - lock, smooth flange, 3/8 NC distorted thread
BOLT - hex head, 1/2 NC x 3-1/2 inch ...........................................................
BOLT - hex head, 3/4 NC x 4-1/4 inch ...........................................................
NUT – lock, 1/2 NC distorted thread...............................................................
NUT – lock, 3/4 NC distorted thread...............................................................
NUT - serrated flange, 3/8 NC
NUT - hex, 1/2 NC
WASHER – flat, 3/4 inch I.D.
SERIAL
NUMBER
-102199
102200-102199
102200-102199
102200-102199
102200-115999
116000-
-102199
-102199
-115999
116000-115999
102200-138024
-138024
-138024
-138024
-138024
-115999
116000-115999
116000-
Reel arm quantity: 21' = 25 / 25' = 30 / 30' = 35 / 36' = 50
May substitute new tube (those indicated with Serial No. 102200-) with the following modifications:
Drill out washer (item 13) or order new washer (item 18). Replace bolt (B) with bolt (N).
Issue 05/05
52
HYDRAULICS: 21', 25' & 30
Form # 12903
Issue 05/05
53
HYDRAULICS: 21', 25' & 30' (for 36' see pages 56 to 59)
REF
PART
NUMBER
1
31814
114274
31815
32220
29018
30282
2
3
4
5
6
7
8
9
10
11
12
24063
24185
29110
129525
21494
118157
43802
24186
29168
30281
30302
13689
31824
13689
31821
32112
31942
31941
31940
13
14
15
17
18
19
24137
29448
32225
18621
8640
29910
20
21
22
30261
30287
31818
32222
31819
31827
29007
30313
6007
30026
30444
29496
30254
32109
31936
31937
31938
23
24
25
26
27
28
29
30
DESCRIPTION
QTY
HOSE - tractor to reel cylinder .......................................................................... 1
HOSE - tractor to reel cylinder, 30’ Australian units ........................................... 1
HOSE - tractor to header lift cylinder ................................................................ 1
HOSE - tractor to header lift cylinder, 30’ Australian units ................................. 1
SUPPORT - hose .............................................................................................. 1
FITTING - elbow, 90°, 9/16 o-ring (for machine up to Ser. # 56152 fittings at ... 1
Master Cylinder were #'s 8 & 43, qty. 1 each), (See Note 2)
CLAMP - hose ................................................................................................... 2
CYLINDER - master reel lift - round port blocks (Seal Kit: 21494)..................... 1
CYLINDER - master reel lift - rectangular port blocks (Seal Kit: 30414) ........... 1
CYLINDER - master reel lift - round port blocks ........................................... 1
SEAL KIT – for older cylinder, see note 1 ...................................................... 1
SEAL KIT – for newer cylinder, see note 1 .................................................... 1
PISTON – for cylinder (also order proper seal kit) ............................................. 1
CYLINDER - single acting (Seal Kit: 21495) ...................................................... 2
CYLINDER - single acting ................................................................................. 2
SEAL KIT: If 3" [74 mm] top of barrel to bleedscrew - 30413
If 13/16" [20 mm] top of barrel to bleedscrew - 21495
FITTING – elbow, 90° Male (qty. 2 for machines up to Serial no. 56152) ......... 1
FITTING - union, restricting swivel adapter - 0.052" dia. orifice ........................ 1
HOSE – hydraulic, cylinder to line ..................................................................... 1
HOSE – hydraulic, cylinder to line ..................................................................... 1
HOSE – hydraulic, to cylinder ........................................................................... 1
HOSE – hydraulic, to cylinder ........................................................................... 1
LINE - hydraulic to R/H reel cylinder - 21', 25', 30'............................................. 1
LINE – hydraulic, to R/H reel cylinder - 21' * ..................................................... 1
* - For machines up to Ser. no. 56152 also order items 47 & 48
TUBING - protective ...................................................................................... A/R
BRACKET - cylinder mounting .......................................................................... 2
HOLDER - hose ................................................................................................ 1
PIN - clevis 5/8 dia. x 1-9/16 inch....................................................................... 1
SPACER ............................................................................................................ 2
CYLINDER - Header Lift (Up to Serial no. 56152 also order item 45) ............... 1
SEAL KIT: 50164
PLUG - breather ................................................................................................ 1
FITTING – tee, male run ................................................................................... 1
HOSE - header lift cylinder to valve - 30' ........................................................... 1
HOSE - header lift cylinder to valve - 30' ........................................................... 1
HOSE - header lift cylinder to valve - 21'& 25' ................................................... 1
HOSE - header lift cylinder to valve - 21'& 25' ................................................... 1
VALVE - c/w O-Ring (21873) - for Serial No. 71961 and up, see pg. 58 ........... 1
O-RING .............................................................................................................. 1
PLUG - pipe ...................................................................................................... 1
COUPLING - steel pipe ..................................................................................... 1
VALVE - check (for machines up to Serial no. 68982 also order item 26) ........ 2
HOSE - tee to check valve ................................................................................ 1
TEE - male branch ............................................................................................ 1
LINE - hydraulic - to R/H wheel cylinder: 21', 25' and 30' ................................. 1
LINE - hydraulic line - to R/H wheel cylinder: 21' * ............................................ 1
LINE - hydraulic - to R/H wheel cylinder: 25' * .................................................. 1
LINE - hydraulic - to R/H wheel cylinder: 30' * ................................................... 1
* - for machines up to Serial No. 56152 also order items 48 & 49)
SERIAL
NUMBER
12450012450056153-56152
56153See note 2 & 3
-56152
56153-71960
-56152
-56152
56153-56152
5615371961-71960
-71960
-71960
-71960
-56152
-71960
71961-71960
71961-71960
-56152
-71960
-71960
-71960
-71960
-71960
71961-71960
-71960
-71960
NOTES:
1.) When ordering seal kits, determine which kit you need as follows: Newer cylinders (item 6) are identified by an ID sticker
marked with the part no. If your cylinder has this ID sticker, order seal kit 118157. If there is no ID sticker, order seal kit
21494.
2.) When replacing any earlier master cylinder (item 6) with newer design, also order elbow fitting, item 4 or 57 (depending on
port size) for the lower port. Failure to install elbow (aligned at least 20º outboard) in place of straight fitting will result in hose
damage when reel is lowered. Newer cylinder is identified by an ID sticker on the barrel.
3.) For units with SN 162249 and below, when replacing master reel lift cylinder (item 6) also order ¾ o-ring fittings kit 129530.
Form # 12903
Issue 05/05
54
HYDRAULICS: 21', 25' & 30'
Form # 12903
Issue 05/05
55
HYDRAULICS: 21', 25' & 30'
for 36' see pages 56 to 59
REF
PART
NUMBER
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
18738
18648
18603
29831
18627
29678
16008
29712
31881
30301
31492
18609
5736
15158
30667
30541
31939
48
49
32380
32111
21878
31935
50
52
53
54
55
56
57
32108
30377
15903
13689
31821
31824
REF
32384
32382
32381
32383
32382
30283
DESCRIPTION
QTY
PIN - clevis 5/8 dia. x 2-1/2 inch ................................................................... 5
PIN - cotter 3/16 dia. x 1-1/4 inch ................................................................. 7
WASHER - flat 1-1/16 I.D. (as required for right wheel alignment) ............. 9
PIN – clevis, cylinder ................................................................................... 1
PIN - clevis 3/4 dia. x 2-1/2 inch ................................................................... 1
HOSE ASSEMBLY - (Up to Ser.# 56152 also order handle 29713, Pg 13 .. 1
PIN - roll 5/16 dia. x 1-1/2 inch ..................................................................... 1
WASHER - dished ....................................................................................... 2
CLAMP ........................................................................................................ 2
FITTING - union, restricting swivel adapter - 0.078" dia. orifice .................. 1
PIN ............................................................................................................... 2
PIN - cotter 1/4 dia. x 2 inch ......................................................................... 4
FITTING - elbow, 90° street (qty. 2 for machines up to Serial no. 56152) ......... 1
FITTING - elbow, 45° street, 21' only .......................................................... 1
PLUG - breather .......................................................................................... 1
CLIP - for 1/4" O.D. Tube ........................................................................ A/R
LINE – hydraulic, from L/H reel cylinder (for machines up to ....................... 1
Ser. no. 56152 also order items 12 & 48)
LINE – hydraulic, from L/H Reel Cylinder - 21' & 25' ................................... 1
LINE – hydraulic, from reel cylinder - 30' ..................................................... 1
FITTING - union (Qty. 3 for 21') ................................................................... 4
LINE – hydraulic, from Valve ....................................................................... 1
(for machines up to Ser. no. 56152 also order items 30 & 48)
LINE – hydraulic, from valve ........................................................................ 1
FITTING - union, restricting swivel adapter - 0.052" dia. orifice .................. 1
FITTING - male connector, (see Note 2 on page 53) .................................. 1
HOSE - to Cylinder ...................................................................................... 1
HOSE - to Cylinder ...................................................................................... 1
HOSE - to Cylinder ...................................................................................... 1
VALVE - R/H wheel, see page 58 ............................................................... 1
LINE – hydraulic, R/H wheel connector, 21' ................................................ 1
LINE – hydraulic, R/H wheel connector, 25' ................................................ 1
LINE – Hydraulic, R/H wheel connector, 30' ................................................ 1
LINE – Hydraulic, reel connector, 25' (not required for 21') ......................... 1
LINE – Hydraulic, reel connector, 30' .......................................................... 1
FITTING – elbow, 90º, 3/8 tube x 3/4 o-ring .............................................. 2
SERIAL
NUMBER
-71960
-71960
-71960
-71960
-71960
5615371961-71960
7196171961-71960
719615615368983-150559
-56152
56153-68982
68983719617196171961719617196171961162250-
FOR 36' HYDRAULIC COMPONENTS & ROUTING, SEE PAGES 56, 58, 59
A
B
C
D
E
F
G
H
J
K
L
M
21572
18635
19965
18669
21066
21383
30278
21403
21491
18599
18697
21470
Form # 12903
BOLT – hex head, 1/4 NC x 5/8 inch ..............................................................
WASHER – lock, 1/4 Nom. I.D. .....................................................................
NUT - flange head, 1/2 NC
NUT – flange head, 5/16 NC
-71960
-71960
Issue 05/05
56
36' PULL-TYPE HYDRAULICS
Form # 12903
Issue 05/05
57
36' PULL-TYPE HYDRAULICS
REF
PART
NUMBER
1
2
3
30301
32220
32030
4
5
6
32221
30282
31824
32116
15903
32219
30375
32113
32114
32111
32119
30539
32223
135355
32225
21878
32110
32112
32117
30287
32222
32108
32109
31821
30541
30542
32110
32118
21878
30375
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
27
28
A
B
C
21470
18669
18603
DESCRIPTION
QTY
FITTING - union, restricting swivel adapter, 0.078" dia. orifice .................... 2
HOSE - tractor to header lift cylinder ........................................................... 1
CYLINDER - hydraulic, header lift * (Seal Kit - 50166)................................. 1
* NOTE: For machines with Ser.#'s 71960 and below, Seal Kit for
original header lift cylinder (29910) is 50164.
HOSE - tractor to reel lift cylinder ................................................................ 1
FITTING – elbow, 90° male ......................................................................... 3
HOSE - cylinder to 1/4 O.D. line .................................................................. 2
HOSE - cylinder to 3/8 O.D. line .................................................................. 2
FITTING - connector, male, (see note 2 on page 53)................................... 1
HOSE - cylinder to line ................................................................................ 1
FITTING – union, 3/8 tube ........................................................................... 1
LINE – hydraulic, center reel cylinder return ................................................ 1
LINE – hydraulic, to center reel cylinder ...................................................... 1
LINE – hydraulic, to R/H reel cylinder, left side, 1/4 O.D. ............................ 1
LINE – hydraulic, to R/H reel cylinder, left side, 3/8 O.D. ............................ 1
FITTING - elbow, 90° male .......................................................................... 2
HOSE - to center reel cylinder ..................................................................... 2
HOSE – to center reel cylinder .................................................................. 2
CLAMP ........................................................................................................ 3
LINE – hydraulic, connector ......................................................................... 1
LINE – hydraulic, to R/H reel cylinder, right side, 1/4 O.D. .......................... 1
LINE – hydraulic, to R/H reel cylinder, right side, 3/8 O.D. .......................... 1
FITTING - tee, male run ............................................................................... 1
HOSE - header lift cylinder to valve ............................................................. 1
LINE – hydraulic, to R/H wheel - left side .................................................... 1
LINE – hydraulic, to R/H wheel - right side .................................................. 1
HOSE - to cylinder ....................................................................................... 1
CLIP - for 1/4" O.D. tube .......................................................................... A/R
CLIP - for 3/8" O.D. tube .......................................................................... A/R
LINE – hydraulic, reel line connector - 1/4 O.D. .......................................... 1
LINE – hydraulic, reel line connector - 3/8 O.D. .......................................... 1
SERIAL
NUMBER
see note 2, P. 53
-72991
72992-150559
-72991
72992-162249
162250-
-72991
72992-
-72991
72992-72991
72992-
WASHER – flat, 1-1/16 inch I.D.
NOTE: For miscellaneous pins, clamps, etc. not shown, see page 52
Form # 12903
Issue 05/05
58
R/H WHEEL VALVE
REF
PART
NUMBER
DESCRIPTION
QTY
SERIAL
NUMBER
NOTE: This valve is used on 21', 25' & 30' machines with
Serial No. 70961 and up as well as all 36' machines.
1
2
3
5
6
7
8
9
10
11
32179
32183
30523
32184
32182
32180
32181
30697
32222
31827
32176
VALVE ASSEMBLY - R/H wheel (inc. items 2-9) ......................................... 1
CAM - valve ................................................................................................. 1
RING - snap ................................................................................................. 2
BODY - valve ............................................................................................... 1
BALL ............................................................................................................ 2
SPRING - check .......................................................................................... 2
FITTING - connector, male c/w O-Ring (30707) .......................................... 2
O-RING ........................................................................................................ 2
HOSE - hydraulic, tee to valve 30’ & 36’ ...................................................... 1
HOSE – hydraulic, tee to valve, 21' & 25' ..................................................... 1
HOSE ASSEMBLY ...................................................................................... 1
A
B
C
D
21570
18596
18635
18588
WASHER – flat, 9/32 inch I.D.
NUT – hex, 1/4 NC
Form # 12903
Issue 05/05
59
36' PULL-TYPE CENTER REEL LIFT CYLINDER
REF
PART
NUMBER
DESCRIPTION
QTY
1
2
3
4
5
6
32273
*129524
32416
113835
118474
32278
32276
32274
118131
18608
CYLINDER - center reel (rectangular port blocks) Seal Kit: 30562 ............. 1
CYLINDER - center reel (round port blocks), see note 1 & 2.................. 1
SEAL KIT – for older cylinder (with 5/8 hole in cylinder rod) ........................ 1
SEAL KIT – for newer cylinder (with 3/4 hole in cylinder rod) ...................... 1
PISTON – for cylinder (also order proper seal kit) ..............................A/R
BRACKET - reel cylinder ............................................................................. 1
PIN ............................................................................................................... 1
PIN ............................................................................................................... 1
SPACER – cylinder mount ........................................................................... 1
PIN - cotter 3/16 x 1-1/2 inch ........................................................................ 2
A
B
C
21871
18592
21449
SERIAL
NUMBER
NUT – hex, 5/8 NC
NOTES: 1.) If replacing older cylinder (5/8” hole in cylinder rod) with newer cylinder (3/4” hole in cylinder rod)
also order spacer, item 5.
2.) For units with SN 162249 and below, when replacing center reel lift cylinder (item 1) also order
3/4 O-ring fittings kit 129530.
* NOTE: Parts may be substituted providing these pairings are maintained:
•
Cylinder 32273 must be paired with L/H
(double acting) cylinder 29110.
•
•
Form # 12903
Cylinder 32415 must be paired with L/H
(double acting) cylinder 29169, 113798,
118337 or 129525.
Cylinder 113834/129524 must be paired with
L/H (double acting) cylinder 29169, 113798,
118337 or 129525.
Issue 05/05
60
HYDRAULIC SCHEMATIC: 21’, 25’ & 30’
Form # 12903
Issue 05/05
61
HYDRAULIC SCHEMATIC – 36’
Form # 12903
Issue 05/05
62
ELECTRICAL
Form # 12903
Issue 05/05
63
ELECTRICAL
REF
1
PART
NUMBER
DESCRIPTION
QTY
2
3
4
5
6
7
8
29987
32036
29895
29896
32174
16539
21402
21757
21218
16661
30710
30461
HARNESS - wiring c/w connectors, 30', includes item 7 .............................. 1
HARNESS - wiring c/w connectors, 30' Australian units, includes item 7 .... 1
LIGHT - amber (bulb # 1156) ....................................................................... 3
LIGHT - red (bulb #1156) ............................................................................. 2
LAMP - work (sealed beam #4411) ............................................................. 1
CLIP - wiring (Qty. 5 for 21' & 25') ............................................................... 6
TIE - cable ............................................................................................... A/R
PLUG - seven pole ...................................................................................... 1
RECEPTACLE - seven pole ........................................................................ 1
A
B
C
18598
18638
6771
NUT – hex, 1/2 NF
Form # 12903
SERIAL
NUMBER
124500-
Issue 05/05
64
DECALS
Form # 12903
Issue 05/05
65
DECALS
REF
PART
NUMBER
DESCRIPTION
QTY
SERIAL
NUMBER
NOTE: For product identification decals, see next page.
SAFETY DECALS
1
2
3
3A
4
5
6
7
8
9
10
11
12
13
30316
36651
42122
44944
32002
32015
32738
44611
32009
31092
32007
32011
32008
28403
DECAL - DANGER: Rotating Drive Line
DECAL - DANGER: Driveline Shield Missing
DECAL - WARNING: Reel Support Arms
DECAL - WARNING: Hydraulic Oil Leaks
DECAL - CAUTION: Telescoping Hitch Pin
DECAL - CAUTION: Clearance - Towing Vehicle
DECAL - WARNING: Shields and Guards
DECAL - WARNING: Header Support
DECAL - CAUTION: General Precautions
DECAL - CAUTION: Transport Header Lock
DECAL - CAUTION: Transport Lock R/H Wheel
DECAL - CAUTION: Stabilizer Assembly
DECAL - CAUTION: Transport Precautions
DECAL - WARNING: Stay Clear when Machine is Running
INFORMATION DECALS
14
14A
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
32005
32006
31909
32010
32000
32004
115147
115146
115145
23165
23163
31917
31918
31919
31964
31599
32070
122019
DECAL - Power Drive System - 540 RPM
DECAL - Power Drive System - 1000 RPM
DECAL - L/H Wheel Lock Handle
DECAL - IMPORTANT: Float Adjustment
DECAL - IMPORTANT: Transport
DECAL - IMPORTANT: Reel Drive Idler Position
DECAL - Reflector, Red (was 26694)
DECAL - Reflector, Amber (was 26697)
DECAL - Reflector, Day-Glow Orange
DECAL - 50 Hour Grease
DECAL - 10 Hour Grease
DECAL - L/H Draper Drive Belt - 36' Only
DECAL - L/H Draper Drive Belt - 21', 25', 30'
DECAL - R/H Draper Drive Belt
DECAL - IMPORTANT: Reel Hardware Torque
DECAL - IMPORTANT: Main Drive Belt Alignment........................................
DECAL – Patents
DECAL – IMPORTANT: Guards
71961-
PAINT
23955
23951
25991
135148
23917
23957
32879
Form # 12903
PAINT - black, 1 litre (25 – 35 Gloss Level) ...................................................
PAINT - black, aerosol spray (25 – 35 Gloss Level).......................................
PAINT - black, 1 litre (55 – 65 Gloss Level) ...................................................
PAINT - black, aerosol spray (55 – 65 Gloss Level) (Was 25990) .................
PAINT - red, aerosol spray .............................................................................
PAINT - white, 1 litre
PAINT - white, aerosol spray
-124499
-124499
124500124500-82885
Issue 05/05
66
PRODUCT IDENTIFICATION DECALS
REF
PART
NUMBER
MacDon 3000/3020
1
43691
2
43986
3
43917
4
43987
5
115001
6
152036
DESCRIPTION
QTY
DECAL - front hitch: L/H tapered rainbow .................................................... 1
DECAL - main hitch: MacDon 3000 rainbow ................................................ 1
DECAL - R/H end panel: MacDon tapered rainbow ..................................... 1
DECAL - back tube: MacDon 3000 rainbow................................................. 1
DECAL – main hitch & R/H backsheet: MacDon 3000 rainbow ................... 2
DECAL – main hitch & R/H backsheet: MacDon 3020 rainbow ................... 2
Westward 3000/3020
10
44867
DECAL - driveline shield: "WP" .................................................................... 2
11
44854
DECAL - R/H backsheet & back tube........................................................... 2
12
115002
DECAL – main hitch & R/H backsheet: Westward 3000 .............................. 2
13
152037
DECAL – main hitch & R/H backsheet: Westward 3020 .............................. 2
Form # 12903
SERIAL
NUMBER
-115999
-115999
-115999
-115999
116000-
-115999
-115999
116000-
Issue 05/05
67
REF
PART
NUMBER
DESCRIPTION
QTY
SERIAL
NUMBER
Prairie Star 4600/4620
14
44902
DECAL - back tube: Prairie Star................................................................... 1
15
44901
DECAL - front hitch: Prairie Star................................................................... 1
16
44903
DECAL - main hitch: 4600 ............................................................................ 1
17
115004
DECAL – main hitch & R/H backsheet: PRAIRIE STAR 4600 ..................... 2
18
152039
DECAL – main hitch & R/H backsheet: PRAIRIE STAR 4620 ..................... 2
-115999
-115999
-115999
116000-
Premier 1900/1920
19
43997
20
43996
21
43998
22
43989
23
115003
24
152038
-115999
-115999
-115999
-115999
116000-
Form # 12903
DECAL - front hitch: L/H tapered stripe ........................................................ 1
DECAL - main hitch: Premier 1900 stripe..................................................... 1
DECAL - R/H end panel: Premier tapered stripe.......................................... 1
DECAL - back tube: Premier 1900 stripe ..................................................... 1
DECAL - main hitch & R/H backsheet: PREMIER 1900............................... 2
DECAL - main hitch & R/H backsheet: PREMIER 1920............................... 2
Issue 05/05
68
REF
PART
NUMBER
DESCRIPTION
QTY
SERIAL
NUMBER
Case Harvest Pro 8020
25
152045
DECAL - main hitch & R/H backsheet: Harvest Pro 8020 ............................ 2
Form # 12903
Issue 05/05
BELT LISTING
29695
Main Drive
29384
Knife Drive
4226
32360
69
Primary Reel Drive
Draper Countershaft Drive
29914 z Final Reel Drive - R/H Draper Drive, Wide Opening (21', 25', 30') & 36' R/H
L/H Draper Drive Wide Opening (21', 25', 30')
152049 Final Reel Drive - R/H Draper Drive, Wide Opening (21', 25', 30') & 36' R/H
L/H Draper Drive Wide Opening (21', 25', 30')
29915 z R/H Draper Drive Narrow Opening (21', 25', 30')
L/H Draper Drive Narrow Opening (Optional) (21', 25', 30')
152050 R/H Draper Drive Narrow Opening (21', 25', 30')
L/H Draper Drive Narrow Opening (Optional) (21', 25', 30')
29920 z L/H Draper Drive - 36'
152051 L/H Draper Drive - 36'
Form # 12903
Issue 05/05
70
NUMERICAL LIST
PART NO.
PAGE
PART NO.
PAGE
PART NO.
PAGE
PART NO.
PAGE
334
334
795
1868
2146
4226
4226
5113
5259
5512
5736
6007
6596
6647
7038
7782
7782
7782
7900
7900
7900
7909
7910
7910
7920
8640
9128
9213
11142
11142
11460
13125
13125
13125
13125
13125
13626
13626
13684
13689
13689
13689
13697
14333
14334
14649
14649
15158
15325
15325
15406
15903
17
21
21
43
5
43
69
7
43
13
55
53
37
27
23
19
23
35
13
13
27
13
13
27
13
53
17
21
17
21
5
5
9
11
15
47
27
31
43
53
53
55
33
37
37
33
43
55
5
15
25
55
15903
16008
16008
16539
16661
16671
16677
16944
17675
18585
18585
18599
18601
18603
18605
18605
18607
18608
18608
18608
18608
18608
18609
18611
18611
18621
18627
18627
18629
18629
18648
18648
18648
18648
18648
18671
18671
18671
18671
18725
18738
19681
19681
20044
20312
20410
20411
20429
20535
20535
20694
21010
57
33
55
63
63
31
48
31
27
17
21
33
13
55
33
37
27
17
21
43
47
59
55
9
11
53
15
55
9
11
5
9
11
13
55
5
27
43
51
51
55
17
21
37
5
48
48
43
37
48
31
5
21010
21010
21032
21218
21263
21263
21263
21292
21301
21313
21354
21376
21395
21402
21404
21494
21540
21540
21540
21540
21540
21545
21655
21685
21686
21687
21701
21701
21702
21719
21757
21794
21794
21859
21859
21860
21860
21869
21870
21878
21878
21878
22051
22072
22072
22072
22671
22922
23064
23065
23116
23117
27
35
3
63
17
33
43
7
51
13
5
13
13
63
5
53
7
9
11
13
27
27
25
13
13
13
17
21
33
13
63
17
21
17
21
19
23
33
33
55
57
57
17
9
11
27
48
37
31
31
31
31
23142
23163
23165
23718
23751
23917
23951
23955
23957
24063
24137
24185
24186
25991
26390
26391
26392
26393
26396
26411
26412
26426
26427
26427
26428
26428
26429
26429
26431
26723
26729
26755
26766
27160
28403
28815
29003
29007
29010
29016
29016
29016
29018
29019
29020
29024
29025
29026
29027
29033
29033
29055
43
65
65
33
37
65
65
65
65
53
53
53
53
65
37
37
37
37
37
37
37
37
37
43
37
43
37
43
37
48
48
48
48
51
65
31
5
53
17
17
21
27
53
13
5
43
33
33
13
17
21
17
Form # 12903
Issue 05/05
71
NUMERICAL LIST
PART NO.
PAGE
PART NO.
PAGE
PART NO.
PAGE
PART NO.
PAGE
29055
29110
29168
29210
29216
29274
29289
29290
29291
29302
29303
29307
29308
29336
29347
29355
29356
29361
29362
29364
29371
29374
29376
29378
29380
29384
29384
29385
29385
29394
29396
29401
29402
29405
29407
29408
29409
29410
29412
29413
29418
29421
29430
29434
29435
29436
29438
29440
29446
29448
29462
21
53
53
17
15
27
3
3
3
3
3
3
3
31
27
27
27
27
27
27
27
27
27
27
27
27
69
17
21
27
33
33
33
33
33
33
33
27
33
33
27
43
43
33
43
43
43
43
43
53
43
29464
29467
29470
29473
29474
29482
29483
29493
29495
29495
29496
29533
29536
29543
29550
29555
29556
29560
29561
29564
29564
29565
29580
29580
29588
29588
29596
29596
29597
29598
29603
29603
29612
29620
29632
29638
29639
29642
29646
29652
29657
29661
29667
29668
29669
29678
29695
29695
29695
29700
29700
43
5
43
33
43
33
33
33
33
35
53
5
5
5
5
5
5
17
17
17
21
5
17
21
17
21
19
23
5
7
17
21
5
5
17
5
5
5
5
5
5
27
48
48
48
55
17
21
69
17
21
29702
29704
29706
29706
29712
29713
29715
29723
29726
29726
29728
29731
29731
29732
29737
29738
29742
29742
29743
29755
29763
29763
29765
29772
29773
29774
29775
29776
29783
29785
29786
29788
29792
29794
29797
29798
29804
29805
29817
29818
29821
29823
29824
29827
29828
29831
29834
29834
29836
29839
29848
17
17
17
21
55
13
43
17
17
21
43
17
21
43
43
43
17
21
5
17
27
43
3
3
3
3
3
13
3
15
13
13
3
13
3
13
3
13
3
13
27
13
37
37
37
55
17
21
13
13
7
29853
29858
29866
29888
29891
29894
29895
29896
29901
29901
29901
29901
29902
29902
29902
29902
29903
29903
29905
29905
29906
29910
29910
29914
29914
29914
29915
29915
29920
29920
29959
29959
29987
30026
30036
30061
30061
30061
30243
30254
30261
30281
30282
30282
30283
30287
30287
30301
30301
30302
30313
7
7
7
13
5
13
63
63
17
17
21
21
17
17
21
21
17
21
17
21
7
53
59
33
43
69
33
69
33
69
19
23
63
53
48
5
9
11
5
53
53
53
53
57
55
53
57
55
57
53
53
Form # 12903
Issue 05/05
72
NUMERICAL LIST
PART NO.
PAGE
PART NO.
PAGE
PART NO.
PAGE
PART NO.
PAGE
30316
30316
30318
30328
30367
30375
30375
30377
30444
30446
30461
30464
30464
30488
30516
30516
30517
30517
30518
30519
30520
30520
30521
30522
30523
30525
30525
30529
30539
30541
30541
30542
30550
30623
30661
30661
30667
30668
30668
30669
30669
30696
30696
30697
30710
30758
30827
30852
30852
30991
31092
31145
25
65
25
25
27
57
57
55
53
13
63
9
11
25
13
27
13
27
27
27
13
27
13
13
58
9
11
5
57
55
57
57
37
25
19
23
55
30
31
30
31
30
31
58
63
13
13
30
31
13
65
5
31168
31453
31465
31465
31482
31488
31492
31492
31594
31594
31599
31752
31752
31770
31771
31814
31815
31818
31819
31821
31821
31821
31824
31824
31824
31827
31827
31876
31881
31892
31909
31917
31918
31919
31935
31936
31937
31938
31939
31940
31941
31942
31964
32000
32002
32004
32005
32006
32007
32008
32009
32010
43
13
3
27
5
5
5
55
19
23
65
9
11
9
9
53
53
53
53
53
55
57
53
55
57
53
58
17
55
3
65
65
65
65
55
53
53
53
55
53
53
53
65
65
65
65
65
65
65
65
65
65
32011
32015
32018
32030
32033
32036
32037
32050
32051
32066
32069
32070
32083
32084
32088
32089
32094
32094
32099
32099
32100
32108
32108
32109
32109
32110
32110
32111
32111
32112
32112
32113
32114
32116
32117
32118
32119
32120
32127
32128
32150
32151
32163
32164
32165
32166
32166
32168
32168
32168
32169
32170
65
65
33
57
25
63
37
33
33
3
3
65
25
25
5
5
17
21
17
21
33
55
57
53
57
57
57
55
57
53
57
57
57
57
57
57
57
47
35
35
41
41
35
35
35
19
23
19
23
35
35
35
32171
32171
32172
32172
32173
32174
32176
32179
32180
32181
32182
32183
32184
32188
32194
32200
32202
32202
32219
32220
32220
32221
32222
32222
32222
32223
32225
32225
32230
32236
32240
32243
32246
32247
32265
32273
32273
32274
32274
32275
32276
32278
32282
32282
32283
32284
32287
32287
32292
32296
32297
32298
19
23
19
23
35
63
58
58
58
58
58
58
58
49
49
49
49
51
57
53
57
57
53
57
58
57
53
57
27
27
27
27
27
27
47
59
59
47
59
47
59
59
5
9
3
3
5
9
9
3
3
9
Form # 12903
Issue 05/05
73
NUMERICAL LIST
PART NO.
PAGE
PART NO.
PAGE
PART NO.
PAGE
PART NO.
PAGE
32298
32309
32315
32315
32320
32320
32325
32330
32340
32346
32347
32348
32353
32360
32360
32360
32363
32367
32371
32376
32380
32381
32382
32382
32383
32384
32391
32392
32416
32659
32684
32689
32722
32738
32755
32760
32761
32762
32763
32801
32824
32825
32828
32829
32852
32856
32858
32860
32879
32891
32892
11
9
9
11
9
11
13
13
13
48
48
48
48
17
21
69
11
11
11
11
55
55
55
55
55
55
5
9
59
37
37
37
31
65
31
25
25
25
25
25
51
51
51
51
51
51
51
51
65
3
3
32893
32906
32916
32918
32919
32920
32921
32922
32923
33001
33190
33202
33759
33768
33773
33774
33784
33787
33955
33955
34390
34390
34391
34391
34399
35694
36176
36651
36651
37855
37866
37866
37948
40110
42122
43076
43077
43078
43106
43107
43108
43109
43122
43145
43469
43691
43779
43802
43917
43986
43987
3
51
51
37
37
37
37
37
37
37
37
37
37
37
37
37
37
33
30
31
30
31
30
31
31
51
5
25
65
43
43
47
43
51
65
31
31
31
51
51
51
51
51
51
37
66
37
53
66
66
66
43989
43996
43997
43998
44611
44854
44867
44901
44902
44903
44944
49464
49468
49553
49554
49557
49633
49667
49667
49901
49904
49905
49910
49911
49915
49917
49918
49920
49927
49929
49935
50213
102187
103912
103977
113835
113965
114274
115001
115002
115003
115004
115145
115146
115147
117302
117303
117306
117307
118131
118157
67
67
67
67
65
66
66
67
67
67
65
51
51
51
51
51
51
30
31
43
43
43
23
21
21
21
21
33
13
13
13
13
13
5
5
59
37
53
66
66
67
67
65
65
65
51
51
51
51
59
53
118162
118345
118346
118347
118474
118475
121012
122019
129524
129525
135148
135355
137035
152001
152003
152005
152007
152009
152011
152012
152013
152014
152018
152025
152026
152027
152028
152030
152035
152036
152037
152038
152039
152045
152049
152049
152049
152050
152050
152051
152051
152056
B 1354
B 1355
B 1356
B 1495
B 1495
B 1855
B 2847
B 4289
31
31
31
31
59
31
51
65
59
53
65
57
51
3
3
3
35
27
33
33
33
33
33
33
33
33
33
21
21
66
66
67
67
68
33
43
69
33
69
33
69
25
25
25
7
7
9
11
33
15
Form # 12903
Issue 05/05
74
Model 3020/4620/1920/8020 Pull-Type Windrower
SUGGESTED STOCKING LIST
P.C.
REF
PART
NUMBER
DESCRIPTION
SUGGESTED QTY.
2 UNITS 5 UNITS
MAIN DRIVES - Parts Catalog Pg 21
3
21859
BEARING - c/w lock collar
15
21794
PULLEY - idler
23
29695
BELT - main drive
25
152030
SHAFT - PULLEY ASS'Y.
34
32360
BELT - draper countershaft drive
35
49911
IDLER - flat
1
1
1
0
1
1
3
3
3
1
3
3
PTO SHAFT - Parts Catalog Pg 25
4
15406
CROSS & BEARING KIT
0
2
KNIFE DRIVE - Parts Catalog Pg 27
6
30517
Cone c/w Seal, Bearing
7
30516
Cup, Bearing
10
32243
Pitman, c/w Bearings
11
30519
Bearing, less Collar
17
30520
Cap, Dust
36
29384
Belt
2
2
1
2
1
1
4
4
3
5
3
3
CUTTING COMPONENTS - Parts Catalog Pg 31
1
32722
Head, Sickle
1
2
13626
Bushing, Rubber
1
3
49667
Sickle - less head:
1
21 complete, 25 L/H, 30 L/H, 36' L/H
4
43076 *
Sickle - R/H, 25'
1
43077 *
Sickle - R/H, 30'
1
43078 *
Sickle - R/H, 36'
1
5
33955
Plate, Splice - 25, 30, 36'
1
9
30668
Bolt, Rib Nk (sic. hd. & splice pl.)
10
10
30669
Nut, Lock #12 NC
50
11
30696
Bolt, Ribbed Neck (sickle)
50
15
23064
Guard, Sickle
6
118345
Guard, Sickle (L/H end)
1
21
118162
Clip - Hold-down, adjustable
2
ORDER
QTY
UNIT
PRICE
EXT.
PRICE
2
4
2
2
2
2
2
40
200
200
50
4
10
DRAPER DRIVES - Parts Catalog Pg 33
4
21869
Bearing, c/w Collar
8
13697
Pulley, Half
15
14649
Pulley, Idler, "V"
24
152050 *
Belt, Narrow Open. - 21, 25 & 30'
152049 *
Belt - 36' L/H
1
2
1
1
1
4
2
3
3
1
DRAPERS & ROLLERS - Parts Catalog Pg 37
2
26396
Bushing, Anti-wrap
3
43779
Lagging Kit
6
30550
Bearing
10
33773
Tube, Idler Roller
11
6596
Bearing, Ball
12
33001
Retainer, Rubber
23
26431
Spring
25
33797 *
Draper - L/H 30', R/H 21' & 25'
37124 *
Draper - R/H 30'
33796 *
Draper - L/H 25'
26
43469
Connector Kit - Draper
3
2
1
1
1
2
1
0
0
0
1
15
5
3
3
3
6
2
1
1
1
3
* - Order to suit header sizes sold.
Form # 12903
Issue 05/05
75
Model 3020/4620/1920/8020 Pull-Type Windrower
SUGGESTED STOCKING LIST
P.C.
REF
PART
NUMBER
DESCRIPTION
SUGGESTED QTY.
2 UNITS 5 UNITS
REEL DRIVE - Parts Catalog Pg 43
27
49901
Hub, c/w Bronze Bushing
28
49904
Bushing, Bronze
33
4226
Belt, Primary Reel Drive
34
152049
Belt, Final Reel Drive
0
1
1
1
1
3
3
3
BAT REEL - Parts Catalog Pg 51
9
43145
ARM - reel
10
43107 *
BAT - reel, 21'
43108 *
BAT - reel, 25'
43109 *
BAT - reel, 30'
43106 *
BAT - reel, 36'
11
40110
SHIELD - reel end
1
0
0
0
0
1
4
2
2
2
2
3
HYDRAULICS - Parts Catalog Pg 53
6
118157
Seal Kit - Reel Lift Master Cyl.
7
21495
Seal Kit - Reel Lift Slave Cyl.
19
50164 *
Seal Kit - Hdr. Lift Cyl. - 21, 25, 30'
1
1
1
3
2
1
HYDRAULICS, 36' SPECIAL PARTS - Parts Catalog Pg 57 & 59
3
50166 *
Seal Kit - Hdr. Lift Cyl. - 36'
1
1
113835 *
Seal Kit - Reel Lift Center Cyl. - 36'
1
1
1
PAINT Parts Catalog Pg 65
135148
PAINT - black, 1 litre
23957
PAINT - white, 1 litre
1
1
1
1
ORDER
QTY
UNIT
PRICE
EXT.
PRICE
* - Order to suit header sizes sold.
Form # 12903
Issue 05/05

pull - type windrower

Transcription

Similar documents

5020 Mower Conditioner

Neapco Catalogue - AIC Supply Inc.

clearing sales calendar

(1000-1480 Series)

simplicity chipper s..