10l cooler warmer - SunForce Products Inc.

10L COOLER WARMER
WARNING
OPERATION
• This unit is only operable with a 12V power source.
• When using the car battery as the power source, do not use this unit when the car is not running.
Unplug the cigarette lighter adapter after use.
• This unit is not a toy keep away from children.
• Do not allow this unit to become wet, operate only when dry.
• Do not place directly adjacent to sources of heat such as heating, gas oven,
hot water pipes, or under the blazing sun.
• The interior of this unit becomes very hot during warming mode keep away from children.
• This unit does not automatically turn on and off.
• Do not operate unattended for extended periods of time.
• Do not overstuff cooling or heating chamber, the lid needs to be shut.
• Do not block air ventilation, keep at least 10cm away from seat or wall.
• Do not eat or drink spoiled or contaminated perishable items.
1. Set the WARM/OFF/COOL switch to the OFF position.
2a. Using AC power source - Insert the AC plug of the AC to 12V DC convertor into the AC outlet and car plug into the
output of the convertor, connect the output plug of car plug into the power source socket of the Mini Fridge.
b. Using 12V car battery - Insert the car plug into the 12V cigarette lighter socket and the output plug of car plug into the
power source socket of the Mini Fridge.
3. Insert the car plug into the 12V cigarette lighter socket.
4. Move the WARM/OFF/COOL switch to your desired position. The LED WARM red indicator will light to show that the
unit is warming. The LED COOL green indicator will light to show that the unit is cooling.
5. Put the food and beverages into the unit and close the lid. Do not overstuff the unit.
6. Keep the lid closed during operation and re-close quickly when adding or removing items.
7. After using, turn the WARM/OFF/COOL switch to the OFF position and empty the Mini Fridge.
8. Disconnect the car plug from the 12V cigarette lighter socket.
9. Clean the unit as described in the Care and Maintenance section of this manual.
10. Store in cool and dry area, away from direct sunlight.
11. Keep WARM/OFF/COOL switch in OFF position before changing to WARM and COOL position.
CAUTION
• Make sure the WARM/OFF/COOL switch is set on the OFF position when not in use.
INTRODUCTION
• The Mini Fridge is compact, lightweight, and portable.
It can rest on car seats and floors for easy access.
Ideal for driving trips, camping, picnics, tailgate parties,
lunches, and beach trips.
• Simply plug the Mini Fridge into the 12V DC cigarette
lighter socket or other 12V power sources to keep
food and beverages cold or wa rm.
RECOMMENDATIONS
• The unit takes approx. 1.5 hour s to reach maximum cooling temperature (during favorable outsi de conditions at 80°F
and above, the unit can cool to 30˚F below ambient temperature).
• The unit takes approx 1.5 hours to reach 113°F/45°C.
• For best performance, fill the unit with pre-cooled or preheated food and beverages.
• On cold days, the unit needs more time to reach the maximum warm temperature.
• To promote your unitʼs cooling ability on warm days, try ice packets and keep from direct sunlight.
Fluorescent light
CARE & MAINTENANCE
• After each use, clean the unit inside and outside with a soft cloth and mild soap solution.
• Do not scrape, scratch, or puncture the surface of the unit with sharp objects or abrasives.
• Dry the unit properly and store in a cool, dry place.
FEATURES
• Compact, lightweight, portable
• Uses 12V power sources
• Cools to 30°F below surrounding temperature.
Heats to 113°F/45°C.
• AC to 12V DC converter for indoor use.
• Rests on car seat or floor for easy access
• 6 feet 12V DC power cord with cigarette
lighter plug included
• Cigarette lighter plug equipped with built-in
fuse to protect the unit and power source
• Built-in heat dissipation fan
• WARM/OFF/COOL power switch
• Built-in LED “cool” and “warm” indicators
• During warming mode operation, equipped with
a temperature control device so that the unit will
automatically shut-off and resume to maintain
a constant temperature.
• Carrying handle
• Built-in lighting as the door opens the light
will turn on
• Push the button switch to turn on the
fluorescent light
Green indicator - COOL
WARM/OFF/COOL switch
Red indicator - WARM
Button switch
Carrying handle
TROUBLESHOOTING
Problem:
Unit is not functioning
Solution:
A) Check that WARM/OFF/COOL switch is set on COOL or
WARM position and LED indicator is illuminated
B) Car needs to be running
C) Check car plug fuse is not burnt
Air ventilation
D) Check vehicle fuse box
Power source
socket
SPECIFICATIONS
Power Consumption
4.8 Amp/60 W
Temperature Control Device
149°F/65°C to 122°F/50°C
Thermoelectric Module
Cooling Capacity:
max. 30°F/16.6°C below ambient temperature
+41°F/5°C (set point thermostat)
12V Car plug
AC to 12V DC convertor
Heating Capacity:
+149°F/+65°C (set point thermostat)